corrected method description

NmraDcc.cpp

@@ -93,7 +93,7 @@
 #define MAX_ONEBITHALF  82
 #define MIN_ONEBITFULL  82
 #define MIN_ONEBITHALF  35
-#define MAX_BITDIFF     24
+#define MAX_BITDIFF     18
 
 
 // Debug-Ports
@@ -217,12 +217,18 @@
     #define MODE_TP2 
     #define SET_TP2 
     #define CLR_TP2 
+        //#define MODE_TP2 DDRC |= (1<<2) // A2
+        //#define SET_TP2 PORTC |= (1<<2)
+        //#define CLR_TP2 PORTC &= ~(1<<2)
     #define MODE_TP3 
     #define SET_TP3 
     #define CLR_TP3 
     #define MODE_TP4 
     #define SET_TP4 
     #define CLR_TP4 
+        //#define MODE_TP4 DDRC |= (1<<4) //A4 
+        //#define SET_TP4 PORTC |= (1<<4) 
+        //#define CLR_TP4 PORTC &= ~(1<<4) 
     
 #endif
 #ifdef DEBUG_PRINT
@@ -337,10 +343,9 @@ void ExternalInterruptHandler(void)
 // Bit evaluation without Timer 0 ------------------------------
     uint8_t DccBitVal;
     static int8_t  bit1, bit2 ;
-    static unsigned int  lastMicros = 0;
+    static word  lastMicros = 0;
     static byte halfBit, DCC_IrqRunning;
     unsigned int  actMicros, bitMicros;
-    #ifdef ALLOW_NESTED_IRQ
     if ( DCC_IrqRunning ) {
         // nested DCC IRQ - obviously there are glitches
         // ignore this interrupt and increment glitchcounter
@@ -351,7 +356,6 @@ void ExternalInterruptHandler(void)
         SET_TP3;
         return; //>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> abort IRQ
     }
-    #endif
     SET_TP3;
     actMicros = micros();
     bitMicros = actMicros-lastMicros;
@@ -363,12 +367,11 @@ void ExternalInterruptHandler(void)
     }
     DccBitVal = ( bitMicros < bitMax );
     lastMicros = actMicros;
-    
-    #ifdef ALLOW_NESTED_IRQ
+    #ifdef debug
+    if(DccBitVal) {SET_TP2;} else {CLR_TP2;};
+    #endif
     DCC_IrqRunning = true;
     interrupts();  // time critical is only the micros() command,so allow nested irq's
-    #endif
-    
 #ifdef DCC_DEBUG
     DccProcState.TickCount++;
 #endif
@@ -429,10 +432,13 @@ void ExternalInterruptHandler(void)
             DccRx.BitCount++;
             if( abs(bit2-bit1) > MAX_BITDIFF ) {
                 // the length of the 2 halfbits differ too much -> wrong protokoll
+                CLR_TP2;
+                CLR_TP3;
                 DccRx.State = WAIT_PREAMBLE;
                 bitMax = MAX_PRAEAMBEL;
                 bitMin = MIN_ONEBITFULL;
                 DccRx.BitCount = 0;
+				SET_TP4;
 
         #if defined ( __STM32F1__ )
 				detachInterrupt( DccProcState.ExtIntNum );
@@ -559,7 +565,6 @@ void ExternalInterruptHandler(void)
     {
       CLR_TP3;
       DccRx.State = WAIT_PREAMBLE ;
-      DccRx.BitCount = 0 ;
       bitMax = MAX_PRAEAMBEL;
       bitMin = MIN_ONEBITFULL;
 #ifdef ESP32
@@ -589,11 +594,9 @@ void ExternalInterruptHandler(void)
         DccRx.TempByte = 0 ;
       }
   }
-  #ifdef ALLOW_NESTED_IRQ
-  DCC_IrqRunning = false;
-  #endif
   CLR_TP1;
   CLR_TP3;
+  DCC_IrqRunning = false;
 }
 
 void ackCV(void)
@@ -1359,17 +1362,6 @@ void NmraDcc::pin( uint8_t ExtIntNum, uint8_t ExtIntPinNum, uint8_t EnablePullup
 #if defined ( __STM32F1__ )
   // with STM32F1 the interuptnumber is equal the pin number
   DccProcState.ExtIntNum = ExtIntPinNum;
-  // because STM32F1 has a NVIC we must set interuptpriorities
-  const nvic_irq_num irqNum2nvic[] = { NVIC_EXTI0, NVIC_EXTI1, NVIC_EXTI2, NVIC_EXTI3, NVIC_EXTI4, 
-            NVIC_EXTI_9_5, NVIC_EXTI_9_5, NVIC_EXTI_9_5, NVIC_EXTI_9_5, NVIC_EXTI_9_5, 
-            NVIC_EXTI_15_10, NVIC_EXTI_15_10, NVIC_EXTI_15_10, NVIC_EXTI_15_10, NVIC_EXTI_15_10, NVIC_EXTI_15_10 };
-  exti_num irqNum =  (exti_num)(PIN_MAP[ExtIntPinNum].gpio_bit); 
-
-// DCC-Input IRQ must be able to interrupt other long low priority ( level15 ) IRQ's  
-  nvic_irq_set_priority ( irqNum2nvic[irqNum], PRIO_DCC_IRQ); 
-  
-// Systic must be able to interrupt DCC-IRQ to always get correct micros() values  
-  nvic_irq_set_priority(NVIC_SYSTICK, PRIO_SYSTIC); 
 #else
   DccProcState.ExtIntNum = ExtIntNum;
 #endif

NmraDcc.h

@@ -53,8 +53,6 @@
 
 #define MAX_DCC_MESSAGE_LEN 6    // including XOR-Byte
 
-//#define ALLOW_NESTED_IRQ      // uncomment to enable nested IRQ's ( only for AVR! )
-
 typedef struct
 {
 	uint8_t	Size ;
@@ -107,9 +105,6 @@ typedef struct
 #elif defined( __STM32F1__)
 	#define MAXCV	(EEPROM_PAGE_SIZE/4 - 1)	// number of storage places (CV address could be larger
 											// because STM32 uses virtual adresses)
-    #undef ALLOW_NESTED_IRQ                 // This is done with NVIC on STM32
-    #define PRIO_DCC_IRQ    9
-    #define PRIO_SYSTIC     8               // MUST be higher priority than DCC Irq
 #else
 	#define MAXCV    E2END     					// the upper limit of the CV value currently defined to max memory.
 #endif
@@ -704,9 +699,8 @@ extern void    notifyCVResetFactoryDefault(void) __attribute__ ((weak));
  */
 extern void    notifyCVAck(void) __attribute__ ((weak));
 /*+
- *  notifyAdvancedCVAck() Called when a CV write must be acknowledged.
- *                This callback must increase the current drawn by this
- *                decoder by at least 60mA for 6ms +/- 1ms.
+ *  notifyAdvancedCVAck() Called when a CV write must be acknowledged via Advanced Acknowledgement.
+ *                This callback must send the Advanced Acknowledgement via RailComm.
  *
  *  Inputs:
  *    None