easylinux/NmraDcc
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add files via upload

Browse Source
This commit is contained in:
Geoff Bunza
2018-07-05 15:18:48 -07:00
committed by GitHub
parent f171dd3894
commit c2de60b8cb
20 changed files with 2940 additions and 269 deletions
Download Patch File Download Diff File Expand all files Collapse all files

31
examples/SMA/Dec_17LED_1Ftn/Dec_17LED_1Ftn.ino
View File

@@ -1,5 +1,6 @@
// Production 17 Function DCC Decoder
// Version 5.4 Geoff Bunza 2014,2015,2016
// Production 17 Function DCC Decoder Dec_17LED_1Ftn.ino
// Version 6.0 Geoff Bunza 2014,2015,2016,2017,2018
// Now works with both short and long DCC Addesses
// ******** UNLESS YOU WANT ALL CV'S RESET UPON EVERY POWER UP
// ******** AFTER THE INITIAL DECODER LOAD REMOVE THE "//" IN THE FOOLOWING LINE!!
@@ -9,7 +10,7 @@
int tim_delay = 500;
#define numleds 17
byte ledpins [] = {0,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19};
byte ledpins [] = {3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19};
const int FunctionPin0 = 3;
const int FunctionPin1 = 4;
@@ -26,7 +27,6 @@ const int FunctionPin9 = 12;
const int FunctionPin10 = 13;
const int FunctionPin11 = 14; //A0
const int FunctionPin12 = 15; //A1
const int FunctionPin13 = 16; //A2
const int FunctionPin14 = 17; //A3
const int FunctionPin15 = 18; //A4
@@ -34,7 +34,6 @@ const int FunctionPin16 = 19; //A5
NmraDcc Dcc ;
DCC_MSG Packet ;
uint8_t CV_DECODER_MASTER_RESET = 120;
#define This_Decoder_Address 24
struct CVPair
{
@@ -42,15 +41,25 @@ struct CVPair
uint8_t Value;
};
CVPair FactoryDefaultCVs [] =
#define This_Decoder_Address 24
{
{CV_MULTIFUNCTION_PRIMARY_ADDRESS, This_Decoder_Address},
{CV_ACCESSORY_DECODER_ADDRESS_MSB, 0},
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_MSB, 0},
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_LSB, 0},
{CV_MULTIFUNCTION_PRIMARY_ADDRESS, This_Decoder_Address&0x7F },
// These two CVs define the Long DCC Address
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_MSB, ((This_Decoder_Address>>8)&0x7F)+192 },
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_LSB, This_Decoder_Address&0xFF },
// ONLY uncomment 1 CV_29_CONFIG line below as approprate DEFAULT IS SHORT ADDRESS
// {CV_29_CONFIG, 0}, // Short Address 14 Speed Steps
{CV_29_CONFIG, CV29_F0_LOCATION}, // Short Address 28/128 Speed Steps
// {CV_29_CONFIG, CV29_EXT_ADDRESSING | CV29_F0_LOCATION}, // Long Address 28/128 Speed Steps
{CV_DECODER_MASTER_RESET, 0},
};
uint8_t FactoryDefaultCVIndex = 4;
uint8_t FactoryDefaultCVIndex = sizeof(FactoryDefaultCVs)/sizeof(CVPair);
void notifyCVResetFactoryDefault()
{
// Make FactoryDefaultCVIndex non-zero and equal to num CV's to be reset
@@ -78,7 +87,7 @@ void setup()
// Setup which External Interrupt, the Pin it's associated with that we're using and enable the Pull-Up
Dcc.pin(0, 2, 0);
// Call the main DCC Init function to enable the DCC Receiver
Dcc.init( MAN_ID_DIY, 100, FLAGS_MY_ADDRESS_ONLY, 0 );
Dcc.init( MAN_ID_DIY, 600, FLAGS_MY_ADDRESS_ONLY, 0 );
delay(800);
#if defined(DECODER_LOADED)
if ( Dcc.getCV(CV_DECODER_MASTER_RESET)== CV_DECODER_MASTER_RESET )