easylinux/NmraDcc
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add files via upload

Browse Source
This commit is contained in:
Geoff Bunza
2018-07-05 15:18:48 -07:00
committed by GitHub
parent f171dd3894
commit c2de60b8cb
20 changed files with 2940 additions and 269 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
examples/SMA/Dec_13Serv_4LED_6Ftn/Dec_13Serv_4LED_6Ftn.ino
View File

@@ -1,4 +1,4 @@
// Production 17 Function DCC Decoder
// Production 17 Function DCC Decoder Dec_13Serv_4LED_6Ftn.ino
// Version 5.4 Geoff Bunza 2014,2015,2016
// NO LONGER REQUIRES modified software servo Lib
// Software restructuring mods added from Alex Shepherd and Franz-Peter
@@ -19,7 +19,7 @@
SoftwareServo servo[17];
#define servo_start_delay 50
#define servo_init_delay 7
#define servo_slowdown 3 //servo loop counter limit
#define servo_slowdown 12 //servo loop counter limit
int servo_slow_counter = 0; //servo loop counter to slowdown servo transit
int tim_delay = 500;
@@ -49,7 +49,6 @@ NmraDcc Dcc ;
DCC_MSG Packet ;
uint8_t CV_DECODER_MASTER_RESET = 120;
int t; // temp
#define This_Decoder_Address 24
struct QUEUE
{
int inuse;
@@ -65,12 +64,22 @@ struct CVPair
uint16_t CV;
uint8_t Value;
};
#define This_Decoder_Address 24
CVPair FactoryDefaultCVs [] =
{
{CV_MULTIFUNCTION_PRIMARY_ADDRESS, This_Decoder_Address},
{CV_ACCESSORY_DECODER_ADDRESS_MSB, 0},
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_MSB, 0},
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_LSB, 0},
{CV_MULTIFUNCTION_PRIMARY_ADDRESS, This_Decoder_Address&0x7F },
// These two CVs define the Long DCC Address
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_MSB, ((This_Decoder_Address>>8)&0x7F)+192 },
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_LSB, This_Decoder_Address&0xFF },
// ONLY uncomment 1 CV_29_CONFIG line below as approprate DEFAULT IS SHORT ADDRESS
// {CV_29_CONFIG, 0}, // Short Address 14 Speed Steps
{CV_29_CONFIG, CV29_F0_LOCATION}, // Short Address 28/128 Speed Steps
// {CV_29_CONFIG, CV29_EXT_ADDRESSING | CV29_F0_LOCATION}, // Long Address 28/128 Speed Steps
{CV_DECODER_MASTER_RESET, 0},
{30, 2}, //F0 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{31, 1}, //F0 Rate Blink=Eate,PWM=Rate,Servo=Rate
@@ -137,21 +146,21 @@ CVPair FactoryDefaultCVs [] =
{92, 28}, // Start Position Fx=0
{93, 140}, // End Position Fx=1
{94, 28}, // Current Position
{95, 1}, //F13 CConfig 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{95, 3}, //F13 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{96, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{97, 1}, // Start Position Fx=0
{98, 20}, // End Position Fx=1
{99, 1}, // Current Position
{98, 200}, // End Position Fx=1
{99, 2}, // Current Position
{100, 0}, //F14 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{101, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{102, 1}, // Start Position Fx=0
{103, 4}, // End Position Fx=1
{103, 200}, // End Position Fx=1
{104, 1}, // Current Position
{105, 3}, //F15 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{106, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{107, 1}, // Start Position Fx=0
{108, 60}, // End Position Fx=1
{109, 20}, // Current Position
{109, 1}, // Current Position
{110, 0}, //F16 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{111, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{112, 1}, // Start Position Fx=0
@@ -295,7 +304,7 @@ void loop() //****************************************************************
// from the Arduino loop() function for correct library operation
Dcc.process();
SoftwareServo::refresh();
delay(4);
delay(3);
for (int i=0; i < numfpins; i++) {
if (ftn_queue[i].inuse==1) {