easylinux/NmraDcc
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add files via upload

Browse Source
This commit is contained in:
Geoff Bunza
2018-07-05 15:18:48 -07:00
committed by GitHub
parent f171dd3894
commit c2de60b8cb
20 changed files with 2940 additions and 269 deletions
Download Patch File Download Diff File Expand all files Collapse all files

65
examples/SMA/AccDec_10Servos_7LED_6Ftn/AccDec_10Servos_7LED_6Ftn.ino
View File

@@ -1,5 +1,10 @@
// Production 17 Function DCC Decoder
// Version 5.4 Geoff Bunza 2014,2015,2016
// Production 17 Switch Acessory DCC Decoder AccDec_10Servos_7LED_6Ftn.ino
// Version 6.0 Geoff Bunza 2014,2015,2016,2017,2018
// Now works with both short and long DCC Addesses for CV Control Default 24 (LSB CV 121 ; MSB CV 122)
// ACCESSORY DECODER DEFAULT ADDRESS IS 40 (MAX 40-56 SWITCHES)
// ACCESSRY DECODER ADDRESS CAN NOW BE SET ABOVE 255
// BE CAREFUL! DIFFERENT DCC BASE STATIONS ALLOW DIFFERING MAX ADDRESSES
// NO LONGER REQUIRES modified software servo Lib
// Software restructuring mods added from Alex Shepherd and Franz-Peter
// With sincere thanks
@@ -19,7 +24,7 @@
SoftwareServo servo[17];
#define servo_start_delay 50
#define servo_init_delay 7
#define servo_slowdown 3 //servo loop counter limit
#define servo_slowdown 12 //servo loop counter limit
int servo_slow_counter = 0; //servo loop counter to slowdown servo transit
int tim_delay = 500;
@@ -49,6 +54,7 @@ int t; // temp
#define SET_CV_Address 24 // THIS ADDRESS IS FOR SETTING CV'S Like a Loco
#define Accessory_Address 40 // THIS ADDRESS IS THE START OF THE SWITCHES RANGE
// WHICH WILL EXTEND FOR 16 MORE SWITCH ADDRESSES
// THIS CAN START ABOVE ADDRESS 256
uint8_t CV_DECODER_MASTER_RESET = 120; // THIS IS THE CV ADDRESS OF THE FULL RESET
#define CV_To_Store_SET_CV_Address 121
#define CV_Accessory_Address CV_ACCESSORY_DECODER_ADDRESS_LSB
@@ -61,7 +67,7 @@ struct QUEUE
int stop_value;
int start_value;
};
QUEUE *ftn_queue = new QUEUE[16];
QUEUE *ftn_queue = new QUEUE[17];
struct CVPair
{
@@ -70,15 +76,22 @@ struct CVPair
};
CVPair FactoryDefaultCVs [] =
{
{CV_ACCESSORY_DECODER_ADDRESS_LSB, Accessory_Address},
{CV_ACCESSORY_DECODER_ADDRESS_MSB, 0},
// These two CVs define the Long Accessory Address
{CV_ACCESSORY_DECODER_ADDRESS_LSB, Accessory_Address&0xFF},
{CV_ACCESSORY_DECODER_ADDRESS_MSB, (Accessory_Address>>8)&0x07},
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_MSB, 0},
{CV_MULTIFUNCTION_EXTENDED_ADDRESS_LSB, 0},
// Speed Steps don't matter for this decoder
// ONLY uncomment 1 CV_29_CONFIG line below as approprate DEFAULT IS SHORT ADDRESS
// {CV_29_CONFIG, 0}, // Short Address 14 Speed Steps
{CV_29_CONFIG, CV29_F0_LOCATION}, // Short Address 28/128 Speed Steps
// {CV_29_CONFIG, CV29_EXT_ADDRESSING | CV29_F0_LOCATION}, // Long Address 28/128 Speed Steps
{CV_DECODER_MASTER_RESET, 0},
{CV_To_Store_SET_CV_Address, SET_CV_Address},
{CV_To_Store_SET_CV_Address+1, 0},
{CV_To_Store_SET_CV_Address, SET_CV_Address&0xFF }, // LSB Set CV Address
{CV_To_Store_SET_CV_Address+1,(SET_CV_Address>>8)&0x3F }, //MSB Set CV Address
{30, 2}, //F0 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{31, 1}, //F0 Rate Blink=Eate,PWM=Rate,Servo=Rate
{32, 28}, //F0 Start Position F0=0
{33, 140}, //F0 End Position F0=1
{34, 28}, //F0 Current Position
@@ -112,21 +125,21 @@ CVPair FactoryDefaultCVs [] =
{62, 28}, // Start Position Fx=0
{63, 140}, // End Position Fx=1
{64, 28}, // Current Position
{65, 2}, //F7 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{65, 1}, //F7 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{66, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{67, 28}, // Start Position Fx=0
{68,140}, // End Position Fx=1
{69, 28}, // Current Position
{70, 2}, //F8 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{67, 1}, // Start Position Fx=0
{68,35}, // End Position Fx=1
{69, 1}, // Current Position
{70, 1}, //F8 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{71, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{72, 28}, // Start Position Fx=0
{73, 140}, // End Position Fx=1
{74, 28}, // Current Position
{75, 2}, //F9 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{72, 1}, // Start Position Fx=0
{73, 100}, // End Position Fx=1
{74, 1}, // Current Position
{75, 0}, //F9 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{76, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{77, 28}, // Start Position Fx=0
{78, 140}, // End Position Fx=1
{79, 28}, // Current Position
{77, 1}, // Start Position Fx=0
{78, 10}, // End Position Fx=1
{79, 1}, // Current Position
{80, 0}, //F10 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{81, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{82, 1}, // Start Position Fx=0
@@ -135,22 +148,22 @@ CVPair FactoryDefaultCVs [] =
{85, 1}, //F11 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{86, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{87, 1}, // Start Position Fx=0
{88, 5}, // End Position Fx=1
{88, 50}, // End Position Fx=1
{89, 1}, // Current Position
{90, 1}, //F12 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{91, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{92, 1}, // Start Position Fx=0
{93, 20}, // End Position Fx=1
{93, 100}, // End Position Fx=1
{94, 1}, // Current Position
{95, 3}, //F13 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{96, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{97, 1}, // Start Position Fx=0
{98, 35}, // End Position Fx=1
{98, 200}, // End Position Fx=1
{99, 2}, // Current Position
{100, 0}, //F14 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{101, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
{102, 1}, // Start Position Fx=0
{103, 4}, // End Position Fx=1
{103, 200}, // End Position Fx=1
{104, 1}, // Current Position
{105, 3}, //F15 Config 0=On/Off,1=Blink,2=Servo,3=DBL LED Blink,4=Pulsed,5=fade
{106, 1}, // Rate Blink=Eate,PWM=Rate,Servo=Rate
@@ -299,7 +312,7 @@ void loop() //****************************************************************
// from the Arduino loop() function for correct library operation
Dcc.process();
SoftwareServo::refresh();
delay(4);
delay(3);
for (int i=0; i < numfpins; i++) {
if (ftn_queue[i].inuse==1) {