Serge NOEL
111 lines
4.4 KiB
Plaintext
111 lines
4.4 KiB
Plaintext
<!DOCTYPE html>
|
|
<html lang="en">
|
|
<head>
|
|
<meta name="generator" content="HTML Tidy for HTML5 for Apple macOS version 5.8.0">
|
|
<title>DecoderPro® Main Window</title><!--#include virtual="/help/en/parts/Style.shtml" -->
|
|
<!-- DecoderPro Styles -->
|
|
|
|
<style>
|
|
.dp-center {text-align: center;}
|
|
.dp-right {text-align: right;}
|
|
</style>
|
|
</head>
|
|
<body>
|
|
<!--#include virtual="/help/en/parts/Header.shtml" -->
|
|
|
|
<div id="mBody">
|
|
<!--#include virtual="Sidebar.shtml" -->
|
|
|
|
<div id="mainContent">
|
|
<h1>DecoderPro® Main Window</h1>
|
|
|
|
<h2>Multi-Decoder Control</h2>
|
|
|
|
<div class="dp-right">
|
|
<p><a href="Main_Tool.shtml">Back</a>
|
|
</p>
|
|
|
|
<p><a href="index.shtml#Main">Back to Index</a>
|
|
</p>
|
|
</div>
|
|
|
|
<hr>
|
|
|
|
<p>The <strong>Multi-Programmer Control</strong> provides a convenient way to program CV's
|
|
when you have more than one decoder installed in a locomotive. For example, if you have
|
|
separate decoders to control the motor and provide sound, and they both use the same CV
|
|
locations, programming one decoder would change he settings on the other, usually an
|
|
undesired feature.</p>
|
|
|
|
<p>This control uses CV15 and CV16 to control writing and reading CV values. Prior to
|
|
installation of the decoders into the locomotive, each one has a specific value programmed
|
|
into CV16</p>
|
|
|
|
<p>Recommended values:</p>
|
|
|
|
<ul>
|
|
<li>motor decoder value of 1</li>
|
|
|
|
<li>sound decoder value of 2</li>
|
|
|
|
<li>function only decoder value of 3</li>
|
|
|
|
<li>other uses values of 4 thru 7</li>
|
|
</ul>
|
|
|
|
<p>Decoders should ship with the value of 0 in both CV15 and CV16, You can only perform a
|
|
read or write operation on the decoder if CV15 and CV16 are the same value. In effect, CV16
|
|
is a lock and CV15 is the key.</p>
|
|
|
|
<table>
|
|
<tr>
|
|
<td style="width: 40%" class="dp-center"><img src=
|
|
"images/Main_Multi-Decoder_Control.png" alt="Multi-Prorammer" width="260" height="600">
|
|
</td>
|
|
<td>
|
|
<p>The <strong>ID number</strong> buttons numbered 0 thru 6 let you select the value
|
|
that will unlock the decoder with the corresponding number in it's lock CV16.</p>
|
|
|
|
<p>DecoderPro then reads back the value in CV16 to confirm that the decoder has
|
|
successfully unlocked.</p>
|
|
|
|
<p>The <strong>Legacy</strong> button writes a 7 to CV15, which is a special case. Many
|
|
decoders, especially older models, do not have this locking mechanism present. In some
|
|
cases, specifically a Digitrax FX3 or later decoder and an early SoundTraxx decoder,
|
|
it's possible to emulate the lock using sequential writing of the CVs. Clicking the
|
|
<strong>Legacy</strong> button activates this procedure. Unfortunately, it's not an
|
|
entirely reliable method.</p>
|
|
|
|
<p><strong>Search</strong> button sequentially works through the possible addresses and
|
|
marking those decoder addresses that are found to be present.</p>
|
|
|
|
<p><strong>Reset</strong> button looks for possible combinations to unlock a decoder
|
|
that has been inadvertently locked. <span class="ACCENT">Only use this option if you
|
|
have just one decoder in the locomotive. If you have more than one , it will unlock all
|
|
of them, which may cause confusion later.</span></p>
|
|
|
|
<p><strong>Init DH163 + SoundTraxx</strong> button configures the
|
|
<strong>Legacy</strong> mode discussed above.</p>
|
|
|
|
<p>Status message are displayed below the buttons, shows <strong>idle</strong> when no
|
|
action is occurring.</p>
|
|
|
|
<p>At the bottom of the window you can select the Programming Mode. Any mode not
|
|
supported by your command station will be grayed out.</p>
|
|
|
|
<p>If you select the <strong>Ops</strong> mode, which programs on the main track, you
|
|
meed to enter the address of the decoder (locomotive) that you are programming. Your
|
|
DCC system may require you to check the <strong>Long address</strong> check box if the
|
|
address is a long address.</p>
|
|
</td>
|
|
</tr>
|
|
</table>
|
|
<!--#include virtual="/help/en/parts/Footer.shtml" -->
|
|
</div>
|
|
<!-- closes #mainContent-->
|
|
</div>
|
|
<!-- closes #mBody-->
|
|
<script src="/js/help.js"></script>
|
|
</body>
|
|
</html>
|