Compare commits

...
17 Commits
Author SHA1 Message Date
Manuel Weiser 0ab3db5f2d update version 2026-08-09 15:37:24 +02:00
Manuel Weiser f86d71f8b2 docs: update platformio.ini for beta version v3.4.0-beta1 2026-05-28 19:43:01 +02:00
Manuel Weiser b2ac1e9fcd Merge branch 'devel' 2026-05-28 19:42:53 +02:00
Manuel Weiser f2c1d44f5a chore: update version to 3.4.0 in platformio.ini 2026-05-28 19:42:15 +02:00
Manuel Weiser 3c9a0f17ba docs: update platformio.ini for beta version v3.3.2-beta1 2026-05-28 19:37:26 +02:00
Manuel Weiser 6a9acb9d27 feat: implement scan request handling with timeout and error reporting 2026-05-28 18:58:10 +02:00
Manuel Weiser 9b93d219f9 fix: skip fast-path detection for known spools when a scan request is active 2026-05-28 18:26:08 +02:00
Manuel Weiser f3f51cd6f8 fix: disable WiFiManager auto-reconnect to prevent connection storms 2026-05-28 17:48:42 +02:00
Manuel Weiser 9d3a3411fb feat: enhance RFID tag detection with NDEF support and improved error handling 2026-05-28 17:31:35 +02:00
Manuel Weiser 775700f90f feat: add tag data handling and scan request functionality 2026-05-28 17:04:24 +02:00
Manuel Weiser 9456e6ab91 feat: add support for extended-data tags with OpenSpool/FilaMan protocol 2026-05-28 16:28:13 +02:00
Manuel Weiser 30409a59e0 docs: update platformio.ini for version v3.3.2 2026-05-25 08:29:56 +02:00
Manuel Weiser 17f86a0094 feat: add package-lock.json and update WiFi settings for improved stability 2026-05-25 08:29:26 +02:00
ManuelW eb1c032444 Merge pull request #12 from anderl1969/feature/hw-detection
Documentation for NFC-only mode
2026-04-06 16:21:04 +02:00
anderl1969 696b8ba518 docs: German and English documentation for the NFC-only mode 2026-03-30 15:05:23 +02:00
anderl1969 728c40f0fa docs: images for NFC-only mode 2026-03-30 00:13:12 +02:00
anderl1969 d0d2dbb274 init NFC-only mode documentation
Added convenience note about using a small device for NFC-tag writing.
2026-03-30 00:10:55 +02:00
17 changed files with 786 additions and 78 deletions

No files matched your search

+380
View File
@@ -0,0 +1,380 @@
{
"name": ".opencode",
"lockfileVersion": 3,
"requires": true,
"packages": {
"": {
"dependencies": {
"@opencode-ai/plugin": "1.15.10"
}
},
"node_modules/@msgpackr-extract/msgpackr-extract-darwin-arm64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-darwin-arm64/-/msgpackr-extract-darwin-arm64-3.0.3.tgz",
"integrity": "sha512-QZHtlVgbAdy2zAqNA9Gu1UpIuI8Xvsd1v8ic6B2pZmeFnFcMWiPLfWXh7TVw4eGEZ/C9TH281KwhVoeQUKbyjw==",
"cpu": [
"arm64"
],
"license": "MIT",
"optional": true,
"os": [
"darwin"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-darwin-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-darwin-x64/-/msgpackr-extract-darwin-x64-3.0.3.tgz",
"integrity": "sha512-mdzd3AVzYKuUmiWOQ8GNhl64/IoFGol569zNRdkLReh6LRLHOXxU4U8eq0JwaD8iFHdVGqSy4IjFL4reoWCDFw==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"darwin"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-arm": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-arm/-/msgpackr-extract-linux-arm-3.0.3.tgz",
"integrity": "sha512-fg0uy/dG/nZEXfYilKoRe7yALaNmHoYeIoJuJ7KJ+YyU2bvY8vPv27f7UKhGRpY6euFYqEVhxCFZgAUNQBM3nw==",
"cpu": [
"arm"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-arm64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-arm64/-/msgpackr-extract-linux-arm64-3.0.3.tgz",
"integrity": "sha512-YxQL+ax0XqBJDZiKimS2XQaf+2wDGVa1enVRGzEvLLVFeqa5kx2bWbtcSXgsxjQB7nRqqIGFIcLteF/sHeVtQg==",
"cpu": [
"arm64"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-x64/-/msgpackr-extract-linux-x64-3.0.3.tgz",
"integrity": "sha512-cvwNfbP07pKUfq1uH+S6KJ7dT9K8WOE4ZiAcsrSes+UY55E/0jLYc+vq+DO7jlmqRb5zAggExKm0H7O/CBaesg==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-win32-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-win32-x64/-/msgpackr-extract-win32-x64-3.0.3.tgz",
"integrity": "sha512-x0fWaQtYp4E6sktbsdAqnehxDgEc/VwM7uLsRCYWaiGu0ykYdZPiS8zCWdnjHwyiumousxfBm4SO31eXqwEZhQ==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"win32"
]
},
"node_modules/@opencode-ai/plugin": {
"version": "1.15.10",
"resolved": "https://registry.npmjs.org/@opencode-ai/plugin/-/plugin-1.15.10.tgz",
"integrity": "sha512-V2p7CvpBtKWB+FID7Dl1y0Ci02zUT40A9b2RD9R9BOiuD8ZcKhHWov+irN0xVJA0Eg6OhEBfA0lPKRn1FNKPlw==",
"license": "MIT",
"dependencies": {
"@opencode-ai/sdk": "1.15.10",
"effect": "4.0.0-beta.66",
"zod": "4.1.8"
},
"peerDependencies": {
"@opentui/core": ">=0.2.15",
"@opentui/keymap": ">=0.2.15",
"@opentui/solid": ">=0.2.15"
},
"peerDependenciesMeta": {
"@opentui/core": {
"optional": true
},
"@opentui/keymap": {
"optional": true
},
"@opentui/solid": {
"optional": true
}
}
},
"node_modules/@opencode-ai/sdk": {
"version": "1.15.10",
"resolved": "https://registry.npmjs.org/@opencode-ai/sdk/-/sdk-1.15.10.tgz",
"integrity": "sha512-CUhpmMGGOqzvPnNNjjWmEIodAfP6Qnuki2ChIUKWYF7UImZ4zUcMZnzO5BtUxu/Ni1P8qzWxDioXs+7aIZQEhA==",
"license": "MIT",
"dependencies": {
"cross-spawn": "7.0.6"
}
},
"node_modules/@standard-schema/spec": {
"version": "1.1.0",
"resolved": "https://registry.npmjs.org/@standard-schema/spec/-/spec-1.1.0.tgz",
"integrity": "sha512-l2aFy5jALhniG5HgqrD6jXLi/rUWrKvqN/qJx6yoJsgKhblVd+iqqU4RCXavm/jPityDo5TCvKMnpjKnOriy0w==",
"license": "MIT"
},
"node_modules/cross-spawn": {
"version": "7.0.6",
"resolved": "https://registry.npmjs.org/cross-spawn/-/cross-spawn-7.0.6.tgz",
"integrity": "sha512-uV2QOWP2nWzsy2aMp8aRibhi9dlzF5Hgh5SHaB9OiTGEyDTiJJyx0uy51QXdyWbtAHNua4XJzUKca3OzKUd3vA==",
"license": "MIT",
"dependencies": {
"path-key": "^3.1.0",
"shebang-command": "^2.0.0",
"which": "^2.0.1"
},
"engines": {
"node": ">= 8"
}
},
"node_modules/detect-libc": {
"version": "2.1.2",
"resolved": "https://registry.npmjs.org/detect-libc/-/detect-libc-2.1.2.tgz",
"integrity": "sha512-Btj2BOOO83o3WyH59e8MgXsxEQVcarkUOpEYrubB0urwnN10yQ364rsiByU11nZlqWYZm05i/of7io4mzihBtQ==",
"license": "Apache-2.0",
"optional": true,
"engines": {
"node": ">=8"
}
},
"node_modules/effect": {
"version": "4.0.0-beta.66",
"resolved": "https://registry.npmjs.org/effect/-/effect-4.0.0-beta.66.tgz",
"integrity": "sha512-4arEr62cziFa8BBVDUwJCJJmaVepXf/kRg7KtC0h8+bufngscrHbwWFhr9c+HonwOF+31U3iD3xUJmw9KzX7Dw==",
"license": "MIT",
"dependencies": {
"@standard-schema/spec": "^1.1.0",
"fast-check": "^4.6.0",
"find-my-way-ts": "^0.1.6",
"ini": "^6.0.0",
"kubernetes-types": "^1.30.0",
"msgpackr": "^1.11.9",
"multipasta": "^0.2.7",
"toml": "^4.1.1",
"uuid": "^13.0.0",
"yaml": "^2.8.3"
}
},
"node_modules/fast-check": {
"version": "4.8.0",
"resolved": "https://registry.npmjs.org/fast-check/-/fast-check-4.8.0.tgz",
"integrity": "sha512-GOJ158CUMnN6cSahsv4+ExARvIDuzzinFjkp0E9WtiBa5zcVeLozVkWaE4IzFcc+Y48Wp1EDlUZsXRyAztQcSg==",
"funding": [
{
"type": "individual",
"url": "https://github.com/sponsors/dubzzz"
},
{
"type": "opencollective",
"url": "https://opencollective.com/fast-check"
}
],
"license": "MIT",
"dependencies": {
"pure-rand": "^8.0.0"
},
"engines": {
"node": ">=12.17.0"
}
},
"node_modules/find-my-way-ts": {
"version": "0.1.6",
"resolved": "https://registry.npmjs.org/find-my-way-ts/-/find-my-way-ts-0.1.6.tgz",
"integrity": "sha512-a85L9ZoXtNAey3Y6Z+eBWW658kO/MwR7zIafkIUPUMf3isZG0NCs2pjW2wtjxAKuJPxMAsHUIP4ZPGv0o5gyTA==",
"license": "MIT"
},
"node_modules/ini": {
"version": "6.0.0",
"resolved": "https://registry.npmjs.org/ini/-/ini-6.0.0.tgz",
"integrity": "sha512-IBTdIkzZNOpqm7q3dRqJvMaldXjDHWkEDfrwGEQTs5eaQMWV+djAhR+wahyNNMAa+qpbDUhBMVt4ZKNwpPm7xQ==",
"license": "ISC",
"engines": {
"node": "^20.17.0 || >=22.9.0"
}
},
"node_modules/isexe": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/isexe/-/isexe-2.0.0.tgz",
"integrity": "sha512-RHxMLp9lnKHGHRng9QFhRCMbYAcVpn69smSGcq3f36xjgVVWThj4qqLbTLlq7Ssj8B+fIQ1EuCEGI2lKsyQeIw==",
"license": "ISC"
},
"node_modules/kubernetes-types": {
"version": "1.30.0",
"resolved": "https://registry.npmjs.org/kubernetes-types/-/kubernetes-types-1.30.0.tgz",
"integrity": "sha512-Dew1okvhM/SQcIa2rcgujNndZwU8VnSapDgdxlYoB84ZlpAD43U6KLAFqYo17ykSFGHNPrg0qry0bP+GJd9v7Q==",
"license": "Apache-2.0"
},
"node_modules/msgpackr": {
"version": "1.11.12",
"resolved": "https://registry.npmjs.org/msgpackr/-/msgpackr-1.11.12.tgz",
"integrity": "sha512-RBdJ1Un7yGlXWajrkxcSa93nvQ0w4zBf60c0yYv7YtBelP8H2FA7XsfBbMHtXKXUMUxH7zV3Zuozh+kUQWhHvg==",
"license": "MIT",
"optionalDependencies": {
"msgpackr-extract": "^3.0.2"
}
},
"node_modules/msgpackr-extract": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/msgpackr-extract/-/msgpackr-extract-3.0.3.tgz",
"integrity": "sha512-P0efT1C9jIdVRefqjzOQ9Xml57zpOXnIuS+csaB4MdZbTdmGDLo8XhzBG1N7aO11gKDDkJvBLULeFTo46wwreA==",
"hasInstallScript": true,
"license": "MIT",
"optional": true,
"dependencies": {
"node-gyp-build-optional-packages": "5.2.2"
},
"bin": {
"download-msgpackr-prebuilds": "bin/download-prebuilds.js"
},
"optionalDependencies": {
"@msgpackr-extract/msgpackr-extract-darwin-arm64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-darwin-x64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-arm": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-arm64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-x64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-win32-x64": "3.0.3"
}
},
"node_modules/multipasta": {
"version": "0.2.7",
"resolved": "https://registry.npmjs.org/multipasta/-/multipasta-0.2.7.tgz",
"integrity": "sha512-KPA58d68KgGil15oDqXjkUBEBYc00XvbPj5/X+dyzeo/lWm9Nc25pQRlf1D+gv4OpK7NM0J1odrbu9JNNGvynA==",
"license": "MIT"
},
"node_modules/node-gyp-build-optional-packages": {
"version": "5.2.2",
"resolved": "https://registry.npmjs.org/node-gyp-build-optional-packages/-/node-gyp-build-optional-packages-5.2.2.tgz",
"integrity": "sha512-s+w+rBWnpTMwSFbaE0UXsRlg7hU4FjekKU4eyAih5T8nJuNZT1nNsskXpxmeqSK9UzkBl6UgRlnKc8hz8IEqOw==",
"license": "MIT",
"optional": true,
"dependencies": {
"detect-libc": "^2.0.1"
},
"bin": {
"node-gyp-build-optional-packages": "bin.js",
"node-gyp-build-optional-packages-optional": "optional.js",
"node-gyp-build-optional-packages-test": "build-test.js"
}
},
"node_modules/path-key": {
"version": "3.1.1",
"resolved": "https://registry.npmjs.org/path-key/-/path-key-3.1.1.tgz",
"integrity": "sha512-ojmeN0qd+y0jszEtoY48r0Peq5dwMEkIlCOu6Q5f41lfkswXuKtYrhgoTpLnyIcHm24Uhqx+5Tqm2InSwLhE6Q==",
"license": "MIT",
"engines": {
"node": ">=8"
}
},
"node_modules/pure-rand": {
"version": "8.4.0",
"resolved": "https://registry.npmjs.org/pure-rand/-/pure-rand-8.4.0.tgz",
"integrity": "sha512-IoM8YF/jY0hiugFo/wOWqfmarlE6J0wc6fDK1PhftMk7MGhVZl88sZimmqBBFomLOCSmcCCpsfj7wXASCpvK9A==",
"funding": [
{
"type": "individual",
"url": "https://github.com/sponsors/dubzzz"
},
{
"type": "opencollective",
"url": "https://opencollective.com/fast-check"
}
],
"license": "MIT"
},
"node_modules/shebang-command": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/shebang-command/-/shebang-command-2.0.0.tgz",
"integrity": "sha512-kHxr2zZpYtdmrN1qDjrrX/Z1rR1kG8Dx+gkpK1G4eXmvXswmcE1hTWBWYUzlraYw1/yZp6YuDY77YtvbN0dmDA==",
"license": "MIT",
"dependencies": {
"shebang-regex": "^3.0.0"
},
"engines": {
"node": ">=8"
}
},
"node_modules/shebang-regex": {
"version": "3.0.0",
"resolved": "https://registry.npmjs.org/shebang-regex/-/shebang-regex-3.0.0.tgz",
"integrity": "sha512-7++dFhtcx3353uBaq8DDR4NuxBetBzC7ZQOhmTQInHEd6bSrXdiEyzCvG07Z44UYdLShWUyXt5M/yhz8ekcb1A==",
"license": "MIT",
"engines": {
"node": ">=8"
}
},
"node_modules/toml": {
"version": "4.1.1",
"resolved": "https://registry.npmjs.org/toml/-/toml-4.1.1.tgz",
"integrity": "sha512-EBJnVBr3dTXdA89WVFoAIPUqkBjxPMwRqsfuo1r240tKFHXv3zgca4+NJib/h6TyvGF7vOawz0jGuryJCdNHrw==",
"license": "MIT",
"engines": {
"node": ">=20"
}
},
"node_modules/uuid": {
"version": "13.0.2",
"resolved": "https://registry.npmjs.org/uuid/-/uuid-13.0.2.tgz",
"integrity": "sha512-vzi9uRZ926x4XV73S/4qQaTwPXM2JBj6/6lI/byHH1jOpCzb0zDbfytgA9LcN/hzb2l7WQSQnxITOVx5un/wGw==",
"funding": [
"https://github.com/sponsors/broofa",
"https://github.com/sponsors/ctavan"
],
"license": "MIT",
"bin": {
"uuid": "dist-node/bin/uuid"
}
},
"node_modules/which": {
"version": "2.0.2",
"resolved": "https://registry.npmjs.org/which/-/which-2.0.2.tgz",
"integrity": "sha512-BLI3Tl1TW3Pvl70l3yq3Y64i+awpwXqsGBYWkkqMtnbXgrMD+yj7rhW0kuEDxzJaYXGjEW5ogapKNMEKNMjibA==",
"license": "ISC",
"dependencies": {
"isexe": "^2.0.0"
},
"bin": {
"node-which": "bin/node-which"
},
"engines": {
"node": ">= 8"
}
},
"node_modules/yaml": {
"version": "2.9.0",
"resolved": "https://registry.npmjs.org/yaml/-/yaml-2.9.0.tgz",
"integrity": "sha512-2AvhNX3mb8zd6Zy7INTtSpl1F15HW6Wnqj0srWlkKLcpYl/gMIMJiyuGq2KeI2YFxUPjdlB+3Lc10seMLtL4cA==",
"license": "ISC",
"bin": {
"yaml": "bin.mjs"
},
"engines": {
"node": ">= 14.6"
},
"funding": {
"url": "https://github.com/sponsors/eemeli"
}
},
"node_modules/zod": {
"version": "4.1.8",
"license": "MIT",
"funding": {
"url": "https://github.com/sponsors/colinhacks"
}
}
}
}
+13 -12
View File
@@ -2,17 +2,18 @@
⚠️ **Wichtig: Ab Version 3.0.0 erfordert dieses System das [FilaMan-System](https://github.com/Fire-Devils/filaman-system) Backend. Frühere direkte Integrationen (Spoolman, MQTT, Bambu Lab) wurden in das zentrale FilaMan-System verschoben.**
FilaMan ist ein Werkzeug zur Filamentverwaltung für den 3D-Druck. Es verwendet ESP32-Hardware zur Gewichtsmessung und Verwaltung von NFC-Tags.
Benutzer können Filamentspulen verwalten und das Gerät über eine Weboberfläche konfigurieren.
FilaMan ist ein Werkzeug zur Filamentverwaltung für den 3D-Druck. Es verwendet ESP32-Hardware zur Gewichtsmessung und Verwaltung von NFC-Tags.
Benutzer können Filamentspulen verwalten und das Gerät über eine Weboberfläche konfigurieren.
Das System integriert sich nahtlos in das [FilaMan-System](https://github.com/Fire-Devils/filaman-system).
**NEU ab 3.3.1:** Eine abgespeckte Version ohne Waage ist ebenfalls möglich. Details finden sich unter [NFC-only Modus](docs/NFC-only_mode_de.md).
![Waage](./img/scale_trans.png)
Weitere Bilder finden Sie im [img Ordner](/img/)
oder auf meiner Website: [FilaMan Website](https://www.filaman.app)
Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Weitere Bilder finden Sie im [img Ordner](/img/)
oder auf meiner Website: [FilaMan Website](https://www.filaman.app)
Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
## NEU: Recycling Fabrik
@@ -27,7 +28,7 @@ dass die Spulen automatisch erkannt und über die FilaMan-Waage direkt in das Fi
**Was ist die Recycling Fabrik?**
Die Recycling Fabrik ist ein deutsches Unternehmen, das sich der Entwicklung und Herstellung von nachhaltigem 3D-Druck-Filament verschrieben hat.
Die Recycling Fabrik ist ein deutsches Unternehmen, das sich der Entwicklung und Herstellung von nachhaltigem 3D-Druck-Filament verschrieben hat.
Ihre Filamente bestehen zu 100 % aus recyceltem Material von Endkunden und aus der Industrie – für eine umweltbewusste und ressourcenschonende Zukunft.
Weitere Informationen und Produkte finden Sie hier: [www.recyclingfabrik.com](https://www.recyclingfabrik.com)
@@ -45,7 +46,7 @@ Weitere Informationen und Produkte finden Sie hier: [www.recyclingfabrik.com](ht
### Weboberflächen-Features
- **Echtzeit-Updates:** WebSocket-Verbindung für Live-Datenaktualisierungen.
- **NFC-Tag-Verwaltung:**
- **NFC-Tag-Verwaltung:**
- Schreiben von Filamentdaten auf NFC-Tags.
- Unterstützt automatische Spulenerkennung in kompatiblen Systemen.
- **FilaMan-System Integration:**
@@ -122,7 +123,7 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
**Verwenden Sie den 3V-Pin des ESP für den Touch-Sensor.**
![Verkabelung](./img/Schaltplan.png)
@@ -130,10 +131,10 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
![meineVerkabelung](./img/IMG_2589.jpeg)
![meineVerkabelung](./img/IMG_2590.jpeg)
*Die Wägezelle wird an die meisten HX711-Module wie folgt angeschlossen:
E+ rot
E- schwarz
A- weiß
*Die Wägezelle wird an die meisten HX711-Module wie folgt angeschlossen:
E+ rot
E- schwarz
A- weiß
A+ grün*
## Software-Abhängigkeiten
+13 -12
View File
@@ -2,17 +2,18 @@
⚠️ **Important: Starting with v3.0.0, this system requires the [FilaMan-System](https://github.com/Fire-Devils/filaman-system) backend. Previous direct integrations (Spoolman, MQTT, Bambu Lab) have been moved to the central FilaMan-System.**
FilaMan is a filament management tool for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management.
Users can manage filament spools and configure the device via a web interface.
FilaMan is a filament management tool for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management.
Users can manage filament spools and configure the device via a web interface.
The system integrates seamlessly with the [FilaMan-System](https://github.com/Fire-Devils/filaman-system).
**NEW since 3.3.1:** A reduced version w/o scale is also available. Details can be found in [NFC-only mode](docs/NFC-only_mode_en.md).
![Scale](./img/scale_trans.png)
More Images can be found in the [img Folder](/img/)
or my website: [FilaMan Website](https://www.filaman.app)
german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
More Images can be found in the [img Folder](/img/)
or my website: [FilaMan Website](https://www.filaman.app)
german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
## NEW: Recycling Fabrik
@@ -27,7 +28,7 @@ that the spools can be automatically recognized and imported into the FilaMan-Sy
**What is Recycling Fabrik?**
Recycling Fabrik is a German company dedicated to developing and manufacturing sustainable 3D printing filament.
Recycling Fabrik is a German company dedicated to developing and manufacturing sustainable 3D printing filament.
Their filaments are made from 100% recycled material from both end customers and industry – for an environmentally conscious and resource-saving future.
More information and products can be found here: [www.recyclingfabrik.com](https://www.recyclingfabrik.com)
@@ -45,7 +46,7 @@ More information and products can be found here: [www.recyclingfabrik.com](https
### Web Interface Features
- **Real-time Updates:** WebSocket connection for live data updates.
- **NFC Tag Management:**
- **NFC Tag Management:**
- Write filament data to NFC tags.
- Supports automatic Spool detection in compatible systems.
- **FilaMan-System Integration:**
@@ -122,7 +123,7 @@ When you scan a manufacturer NFC tag for the first time:
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
**!! Make sure that the DIP switches on the PN532 are set to I2C**
**!! Make sure that the DIP switches on the PN532 are set to I2C**
**Use the 3V pin from the ESP for the touch sensor**
![Wiring](./img/Schaltplan.png)
@@ -130,10 +131,10 @@ When you scan a manufacturer NFC tag for the first time:
![myWiring](./img/IMG_2589.jpeg)
![myWiring](./img/IMG_2590.jpeg)
*The load cell is connected to most HX711 modules as follows:
E+ red
E- black
A- white
*The load cell is connected to most HX711 modules as follows:
E+ red
E- black
A- white
A+ green*
## Software Dependencies
+70
View File
@@ -0,0 +1,70 @@
# NFC-only Modus
## Beschreibung
Es kann praktisch sein, ein kleines Gerät in der Nähe deines Desktop-Computers zu haben, wenn du neue Spulen in deine Datenbank hinzufügst.
So kannst du sofort NFC-Tags für sie schreiben. Da keine Waage erforderlich ist (das Gewicht einer neuen Spule ist in der Regel bekannt), ist es sinnvoll, auf diese Funktion zu verzichten, um einen kleineren Formfaktor zu erreichen.
![FilaLite_no_scale](../img/FilaLite_no_scale.png)
## Bedienung
Bevor du das NFC-only Terminal verwenden kannst, musst du es in der `FilaMan System App` registrieren, wie bei jeder anderen Waage auch.
### Tag schreiben
Hauptzweck ist das Schreiben neuer NFC-Tags.
Du startest den Schreibvorgang in der `FilaMan System App` (Web-GUI). Dann wählst du dein NFC-Gerät aus und folgst den Anweisungen auf dem Display.
### Tag lesen
Das Gerät kann Tags zwar lesen, sinnvolle Anwendungsfälle sind jedoch ohne Waage eingeschränkt.
Du kannst trotzdem eine Spule identifizieren und ihr einen Standort mit dem entsprechenden Standort-Tag zuweisen.
Aber ehrlich gesagt: der Hauptzweck des NFC-only Gerätes ist **TAG SCHREIBEN**.
## NFC-only Modus
Beim Start versucht der ESP32, den HX711 (Verstärker) zusammen mit einem angeschlossenen Loadcell-Sensor zu erkennen. Wenn das gelingt, startet er im Normalmodus mit voller Funktionalität.
Andernfalls schaltet er in den **NFC-only Modus**!
Statt einer Gewichtsanzeige zeigt das Display eine Bereitschaftsmeldung. Zusätzlich ist das Waagensymbol in der oberen Zeile durchgestrichen.
![Ready Prompt](../img/no_scale_ready.png)
## Aufbau / Installation
### Hardware
Die Verkabelung der Hardware ist gleich wie bei der originalen, voll ausgestatteten FilaMan-Waage. Es gibt nur 3 Unterschiede:
- Kein HX711 angeschlossen (und natürlich keine Loadcell)
- Kein Tastensensor (ohne Waage ist kein Tarieren nötig)
- optional: 10k Pull-up-Widerstand an Pin 16 (RX2)
Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverlässigkeit beim Erkennen eines fehlenden HX711. Ohne Pull-up-Widerstand sollte es aber ebenfalls funktionieren.
![Schaltplan mit Pull-Up](../img/Schaltplan%20NFC-only%20pullup.png)
| Komponente | ESP32 Pin |
| ---- | ---- |
| 10k Pull-up | 16 |
| | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
#### PN532
- **!! Stelle sicher, dass die DIP-Schalter des PN532 auf I2C gestellt sind**
- Verbinde `VCC` mit 5V
#### OLED
- Verbinde `VCC` mit 3,3V
#### 10k Widerstand (optional)
- Verbinde den Widerstand mit PIN 16 (wo normalerweise der DOUT des HX711 angeschlossen wäre) und 5V
### Software
Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation).
Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus.
+76
View File
@@ -0,0 +1,76 @@
# NFC-only mode
## Description
It may be convenient to have a small device near your desktop computer when adding new spools to your database.
So you are able to write NFC-tags for them right away. Since there is no need for a scale (the weight of a new
spool should be well known), it is pleasant to leave the scale functionality out in advance of a smaller footprint.
![FilaLite_no_scale](../img/FilaLite_no_scale.png)
## Usage
Before you can use the NFC-only device, you have to register it to your FilaMan System App as
you would do with any regular scale device.
### Tag Writing
Its main purpose is to write new NFC tags.
You start the writing process from within the FilaMan System App (Web GUI). You than select
your NFC device and follow the instructions on the device display.
### Tag Reading
Although the device is fully capable of tag reading, its use cases are limited due to the lack of a scale.
But you can still identify a spool and assign it to a location with the according location tag.
But to be honest: the main purpose of the NFC-only device is **TAG WRITING**.
## NFC-only mode
During startup, the ESP32 tries to detect the HX711 (amplifier) together with a connected
loadcell sensor. If successful it starts into normal mode with full functionality.
Otherwise it switches in **NFC-only mode!**
Instead of a weight reading the display shows a ready prompts. Additionally the scale icon
in the top row is crossed out.
![Ready Prompt](../img/no_scale_ready.png)
## Build / Installation
### Hardware
The wiring of the hardware is the same as the original, fully equipped FilaMan scale. There are only 3 differences:
- No HX711 connected (also no loadcell of course)
- No touch sensor (without scale there is no need to tare)
- optional: 10k pull-up resistor on Pin 16 (RX2)
The pull-up resistor is not mandatory, but for good measure. It makes it more reliable to
detect a missing hx711. But it should also work w/o the pull-up resistor.
![Schaltplan mit Pull-Up](../img/Schaltplan%20NFC-only%20pullup.png)
| Component | ESP32 Pin |
| ---- | ---- |
| 10k pull-up | 16 |
| | 17 |
| OLED SDA | 21 |
| OLED SCL. | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
#### PN532
- !! Make sure that the DIP switches on the PN532 are set to I2C
- Connect `VCC` to 5V
#### OLED
- Connect `VCC` to 3.3V
#### 10k Resistor (optional)
- Connect to PIN 16 (where normally the DOUT of the HX711 would connect to) and 5V
### Software
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
Binary file not shown.

After

Width:  |  Height:  |  Size: 1.4 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 205 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 59 KiB

+6 -4
View File
@@ -9,8 +9,8 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.3.1"
to_old_version = "3.2.0"
version = "3.4.1"
to_old_version = "3.4.0"
##
[env:esp32dev]
@@ -68,8 +68,10 @@ build_flags =
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
# Standard-Priorität beibehalten
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT aktivieren für Crash-Recovery (war deaktiviert!)
-DCONFIG_ASYNC_TCP_USE_WDT=1
# WDT für AsyncTCP deaktiviert: Mit aktivem WDT konnten langsame
# WebSocket-Sender (z. B. große ws.textAll-JSONs) den AsyncTCP-Task
# killen und so alle Clients abwerfen.
-DCONFIG_ASYNC_TCP_USE_WDT=0
# ===== LwIP Optimierungen für OTA-Uploads (1.5-2MB) =====
# Schnellere Socket-Freigabe (30s statt 60s TIME_WAIT)
+38 -1
View File
@@ -208,6 +208,25 @@ bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, S
return (httpCode == 200);
}
bool sendTagData(String tagJson) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(10000);
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/tag-data");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
doc["tag_json"] = tagJson;
String payload;
serializeJson(doc, payload);
int httpCode = http.POST(payload);
http.end();
Serial.printf("sendTagData: HTTP %d\n", httpCode);
return (httpCode == 200);
}
void filamanApiTask(void* pvParameters) {
for (;;) {
ApiRequest req;
@@ -228,10 +247,11 @@ void filamanApiTask(void* pvParameters) {
if (hasReq) {
filamanApiState = API_TRANSMITTING;
switch (req.type) {
case API_REQUEST_HEARTBEAT: sendHeartbeatWithRetry(2); break; // Mit Retry-Logik
case API_REQUEST_HEARTBEAT: sendHeartbeatWithRetry(2); break;
case API_REQUEST_WEIGHT: sendWeight(req.id1, req.str1, req.val); break;
case API_REQUEST_LOCATE: sendLocation(req.id1, req.str1, req.id2, req.str2); break;
case API_REQUEST_RFID_RESULT: sendRfidResult(req.str1, req.id1, req.id2, req.bool1, req.str3, req.remainingWeight); break;
case API_REQUEST_TAG_DATA: sendTagData(req.str1); break;
default: break;
}
filamanApiState = API_IDLE;
@@ -323,6 +343,23 @@ void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool succe
}
}
void sendTagDataAsync(String tagJson) {
if (!checkFilamanRegistration()) return;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) if(!apiQueue[i].active) {
apiQueue[i].type = API_REQUEST_TAG_DATA;
apiQueue[i].str1 = tagJson;
apiQueue[i].id1 = 0;
apiQueue[i].id2 = 0;
apiQueue[i].str2 = "";
apiQueue[i].val = 0.0f;
apiQueue[i].active = true;
break;
}
xSemaphoreGive(queueMutex);
}
}
bool initFilaman() {
oledShowProgressBar(3, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_API_INIT));
loadFilamanConfig();
+3 -1
View File
@@ -17,7 +17,8 @@ typedef enum {
API_REQUEST_HEARTBEAT,
API_REQUEST_WEIGHT,
API_REQUEST_LOCATE,
API_REQUEST_RFID_RESULT
API_REQUEST_RFID_RESULT,
API_REQUEST_TAG_DATA
} FilamanApiRequestType;
extern volatile filamanApiStateType filamanApiState;
@@ -30,6 +31,7 @@ void sendHeartbeatAsync();
void sendWeightAsync(int spoolId, String tagUuid, float weight);
void sendLocationAsync(int spoolId, String spoolTagUuid, int locationId, String locationTagUuid);
void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool success, String errorMessage, float remainingWeight = 0);
void sendTagDataAsync(String tagJson);
// Internal blocking functions (used by async task)
bool sendHeartbeat();
+1 -1
View File
@@ -25,7 +25,7 @@
#define SCREEN_PROGRESS_BAR_HEIGHT 12U
#define DISPLAY_BOOT_TEXT "FilaMan"
#define WIFI_CHECK_INTERVAL 60000U
#define WIFI_CHECK_INTERVAL 15000U
#define DISPLAY_UPDATE_INTERVAL 1000U
#define FILAMAN_HEARTBEAT_INTERVAL 60000U
+11 -3
View File
@@ -199,9 +199,17 @@ void loop() {
mainTaskWasPaused = true;
}
// Während eines expliziten Scan-Requests darf kein regulärer Wiegevorgang
// an das Backend gesendet werden.
if (scanRequestActive) {
weightCounterToApi = 0;
weightSend = 0;
lastWeight = weight;
}
// Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
if (currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
if (!scanRequestActive && currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
{
lastWeightReadTime = currentMillis;
@@ -229,7 +237,7 @@ void loop() {
lastWeight = weight;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
if (!scanRequestActive && weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
@@ -251,7 +259,7 @@ void loop() {
}
// Handle successful tag write
if (nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
if (!scanRequestActive && nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
+109 -15
View File
@@ -27,6 +27,35 @@ bool isBambuTag = false;
volatile bool nfcReadingTaskSuspendRequest = false;
volatile bool nfcReadingTaskSuspendState = false;
volatile bool nfcWriteInProgress = false; // Prevent any tag operations during write
volatile bool scanRequestActive = false; // Set by website when frontend requests a tag scan
unsigned long scanRequestStartedAtMs = 0;
const unsigned long SCAN_REQUEST_TIMEOUT_MS = 30000;
void sendScanRequestErrorToBackend(const char* errorMessage) {
if (!scanRequestActive) {
return;
}
JsonDocument doc;
doc["scan_status"] = "error";
doc["error_message"] = errorMessage;
doc["source"] = "rfid_scan_request";
String payload;
serializeJson(doc, payload);
sendTagDataAsync(payload);
scanRequestActive = false;
scanRequestStartedAtMs = 0;
}
void setScanRequest(bool active) {
scanRequestActive = active;
if (active) {
scanRequestStartedAtMs = millis();
} else {
scanRequestStartedAtMs = 0;
}
}
volatile nfcReaderStateType nfcReaderState = NFC_IDLE;
// 0 = nicht gelesen
@@ -1317,10 +1346,16 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage, String uidString) {
Serial.println("JSON-Dokument erfolgreich verarbeitet");
if (doc["sm_id"].is<String>() && doc["sm_id"] != "" && doc["sm_id"] != "0")
{
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
activeSpoolId = doc["sm_id"].as<String>();
lastSpoolId = activeSpoolId;
if (scanRequestActive) {
scanRequestActive = false;
sendTagDataAsync(nfcJsonData);
tagProcessed = true;
} else {
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
activeSpoolId = doc["sm_id"].as<String>();
lastSpoolId = activeSpoolId;
}
}
else if(doc["location_id"].is<int>())
@@ -1350,6 +1385,27 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage, String uidString) {
tagProcessed = true;
activeSpoolId = "";
}
else if (doc["protocol"].is<String>() &&
(doc["protocol"].as<String>() == "openspool" ||
doc["protocol"].as<String>() == "filaman"))
{
// Tag mit erweitertem Protokoll (OpenSpool/FilaMan) aber ohne sm_id.
// FilaMan sucht die Spule anhand der tag_uuid (rfid_uid).
String protocolStr = doc["protocol"].as<String>();
String type = doc["type"] | "?";
String brand = doc["brand"] | "";
String displayText = brand.length() > 0 ? (brand + " " + type) : type;
Serial.println("Extended-data tag: protocol=" + protocolStr + " type=" + type + " brand=" + brand);
activeSpoolId = ""; // Keine sm_id → Gewicht wird mit tag_uuid gesendet
if (scanRequestActive) {
scanRequestActive = false;
sendTagDataAsync(nfcJsonData);
tagProcessed = true;
} else {
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), displayText.c_str());
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
}
}
else
{
Serial.println("Unbekannter Tag-Inhalt.");
@@ -2029,6 +2085,11 @@ void scanRfidTask(void * parameter) {
esp_task_wdt_reset();
yield();
if (scanRequestActive && scanRequestStartedAtMs > 0 && (millis() - scanRequestStartedAtMs) > SCAN_REQUEST_TIMEOUT_MS) {
Serial.println("RFID scan-request timeout reached without tag");
sendScanRequestErrorToBackend("Timeout - no tag found");
}
// Skip scanning during write operations, but keep NFC interface active
if (nfcReaderState != NFC_WRITING && !nfcWriteInProgress && !nfcReadingTaskSuspendRequest && !booting)
{
@@ -2081,7 +2142,8 @@ void scanRfidTask(void * parameter) {
{
activeTagUuid = uidString;
// Try fast-path detection first for known spools
if (quickSpoolIdCheck(uidString)) {
// Skip fast-path when a scan request is active — full NDEF read needed to send tag data
if (!scanRequestActive && quickSpoolIdCheck(uidString)) {
Serial.println("✓ FAST-PATH: Tag processed quickly, skipping full read");
// Set reader back to idle for next scan
nfcReaderState = NFC_READ_SUCCESS;
@@ -2157,16 +2219,48 @@ void scanRfidTask(void * parameter) {
}
else
{
// UID length != 7, might be a Mifare Classic (Bambu tags)
Serial.println("Not a standard NTAG (UID length != 7), trying Bambu Lab tag...");
if (!detectBambuTag(uid, uidLength)) {
//TBD: Show error here?!
oledShowProgressBar(1, 1, tr(STR_FAILURE), tr(STR_UNKNOWN_TAG_TYPE));
oledSetPriority(DISPLAY_PRIORITY_WARNING, 2000);
Serial.println("This doesn't seem to be an NTAG2xx tag (UUID length != 7 bytes)!");
// Reset activeSpoolId when tag type is unknown to prevent autoSet
activeSpoolId = "";
Serial.println("Unknown tag type - activeSpoolId reset to prevent autoSet");
// UID length != 7 — could be Mifare Classic (BambuLab) or non-standard NTAG.
// Try NTAG-style NDEF read first to check for openspool/filaman protocol.
Serial.println("UID length != 7, checking for openspool/filaman protocol first...");
activeTagUuid = uidString;
bool handledAsNdef = false;
uint16_t tagSize = readTagSize();
if (tagSize > 0)
{
uint8_t* data = (uint8_t*)malloc(tagSize);
memset(data, 0, tagSize);
uint8_t numPages = tagSize / 4;
for (uint8_t i = 4; i < 4 + numPages; i++) {
if (!robustPageRead(i, data + (i - 4) * 4)) {
Serial.printf("Page %d read failed, stopping\n", i);
break;
}
if (data[(i - 4) * 4] == 0xFE) {
Serial.println("Found NDEF end marker");
break;
}
yield();
esp_task_wdt_reset();
vTaskDelay(pdMS_TO_TICKS(2));
}
if (decodeNdefAndReturnJson(data, uidString)) {
handledAsNdef = true;
nfcReaderState = NFC_READ_SUCCESS;
}
free(data);
}
if (!handledAsNdef)
{
Serial.println("No NDEF/openspool protocol found, trying Bambu Lab tag...");
if (!detectBambuTag(uid, uidLength)) {
oledShowProgressBar(1, 1, tr(STR_FAILURE), tr(STR_UNKNOWN_TAG_TYPE));
oledSetPriority(DISPLAY_PRIORITY_WARNING, 2000);
Serial.println("This doesn't seem to be an NTAG2xx tag (UUID length != 7 bytes)!");
activeSpoolId = "";
Serial.println("Unknown tag type - activeSpoolId reset to prevent autoSet");
}
}
}
}
+2
View File
@@ -28,6 +28,7 @@ void scanRfidTask(void * parameter);
void startWriteJsonToTag(const bool isSpoolTag, const char* payload, int spoolId = 0, int locationId = 0);
bool quickSpoolIdCheck(String uidString);
bool readCompleteJsonForFastPath(); // Read complete JSON data for fast-path web interface display
void setScanRequest(bool active);
extern TaskHandle_t RfidReaderTask;
extern String nfcJsonData;
@@ -36,6 +37,7 @@ extern String activeTagUuid;
extern String lastSpoolId;
extern volatile nfcReaderStateType nfcReaderState;
extern volatile bool nfcWriteInProgress;
extern volatile bool scanRequestActive;
extern bool tagProcessed;
extern bool isBambuTag;
+5
View File
@@ -285,6 +285,11 @@ void setupWebserver(AsyncWebServer &server) {
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/api/v1/rfid/scan-request", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
setScanRequest(true);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/reboot", HTTP_GET, [](AsyncWebServerRequest *request){
request->send(200, "text/plain", "Rebooting...");
delay(500);
+59 -29
View File
@@ -17,16 +17,54 @@ void wifiSettings() {
WiFi.mode(WIFI_STA);
WiFi.setHostname("FilaMan");
// ESP32-Core Auto-Reconnect aktivieren (unabhängig vom WiFiManager-Flag).
// Sorgt dafür, dass der WiFi-Stack autonom direkt nach einem Disconnect
// neu verbindet, ohne auf das 15s-Polling in checkWiFiConnection() warten zu müssen.
WiFi.setAutoReconnect(true);
WiFi.persistent(true);
// KRITISCH: Power-Save deaktivieren für stabilen Webserver-Betrieb
// Ohne dies geht WiFi in Modem-Sleep und verpasst Requests/Responses
// Dies ist die Hauptursache für Verbindungsabbrüche bei regelmäßigen API-Calls
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Angemessene Sendeleistung (reduziert Hitzeprobleme)
WiFi.setTxPower(WIFI_POWER_17dBm);
// Aktiviere WiFi-Roaming für bessere Stabilität bei schwachem Signal
esp_wifi_set_rssi_threshold(-80);
// Hinweis: Kein esp_wifi_set_rssi_threshold() mehr.
// Der vorherige Wert (-80 dBm) löste in Single-AP-Heimnetzen häufige
// Disconnects aus, sobald das Signal in den normalen Wohnungs-Empfangsbereich
// fiel. Ohne Mesh-/Roaming-Setup bringt der Threshold keinen Vorteil.
}
// Reagiert sofort auf Verbindungsverlust, statt bis zum nächsten
// checkWiFiConnection()-Tick zu warten. Das ESP32-Auto-Reconnect übernimmt
// die eigentliche Wiederherstellung; hier nur Logging + Display-Update.
void onWiFiEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
switch (event) {
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
Serial.printf("WiFi event: STA_DISCONNECTED, reason=%u\n",
info.wifi_sta_disconnected.reason);
if (wifiOn) {
wifiOn = false;
oledShowTopRow();
}
break;
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
Serial.print("WiFi event: STA_GOT_IP ");
Serial.println(WiFi.localIP());
wifiOn = true;
wifiErrorCounter = 0;
// Power-Save nach Reconnect erneut deaktivieren (wird vom Stack
// gelegentlich zurückgesetzt).
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
oledShowTopRow();
break;
default:
break;
}
}
void configModeCallback (WiFiManager *myWiFiManager) {
@@ -39,6 +77,10 @@ void initWiFi() {
// load Wifi settings
wifiSettings();
// WiFi-Events abonnieren, bevor autoConnect() läuft, damit auch frühe
// Disconnects/Reconnects schon erfasst werden.
WiFi.onEvent(onWiFiEvent);
wm.setAPCallback(configModeCallback);
wm.setSaveConfigCallback([]() {
@@ -48,7 +90,10 @@ void initWiFi() {
if(wm_nonblocking) wm.setConfigPortalBlocking(false);
//wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
wm.setWiFiAutoReconnect(true);
// WiFiManager-Reconnect deaktiviert: der ESP32-Stack übernimmt das via
// setAutoReconnect(true). Zwei parallele Reconnect-Mechanismen erzeugen
// sonst einen Verbindungssturm, der den Router zu AUTH_EXPIRE-Kicks verleitet.
wm.setWiFiAutoReconnect(false);
wm.setConnectTimeout(10);
oledShowProgressBar(1, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_WIFI_INIT));
@@ -75,39 +120,24 @@ void initWiFi() {
void checkWiFiConnection() {
if (WiFi.status() != WL_CONNECTED)
{
if (wifiOn) {
Serial.println("WiFi connection lost. Attempting active reconnect...");
wifiOn = false;
oledShowTopRow();
oledDisplayText(tr(STR_WIFI_RECONNECTING));
// Aktiver Reconnect-Versuch statt nur auf LwIP auto-reconnect zu warten
WiFi.reconnect();
}
// setAutoReconnect(true) übernimmt die Wiederverbindung automatisch.
// Hier nur Display-Update und Fehler zählen für den Neustart-Watchdog.
oledDisplayText(tr(STR_WIFI_RECONNECTING));
wifiErrorCounter++;
// Only restart after a significant time of no connection (e.g. 5 minutes)
// Assuming WIFI_CHECK_INTERVAL is 60000ms (1 minute), 5 errors = 5 minutes
if (wifiErrorCounter >= 5)
// Nach ca. 5 Minuten ohne Verbindung Neustart (bei WIFI_CHECK_INTERVAL
// = 15s entspricht das 20 Fehlern).
const uint8_t maxErrors = (uint8_t)(300000UL / WIFI_CHECK_INTERVAL);
if (wifiErrorCounter >= maxErrors)
{
Serial.println("WiFi unable to reconnect for 5 minutes. Restarting...");
Serial.println("WiFi unable to reconnect for ~5 minutes. Restarting...");
ESP.restart();
}
}
else
{
if (!wifiOn) {
Serial.println("WiFi reconnected successfully.");
wifiErrorCounter = 0;
wifiOn = true;
oledShowTopRow();
// Power-Save erneut deaktivieren nach Reconnect (wird manchmal zurückgesetzt)
esp_wifi_set_ps(WIFI_PS_NONE);
} else {
// Reset error counter if we are connected (just to be safe)
wifiErrorCounter = 0;
}
// Connected: Fehlerzähler zurücksetzen. wifiOn wird vom GOT_IP-Event
// gepflegt, daher hier nichts weiter zu tun.
wifiErrorCounter = 0;
}
}