Fix the schematic to remove overlaps

This commit is contained in:
Earle F. Philhower, III committed 2017-08-12 10:39:29 -07:00
1 parent cb6f530577
commit 4985aab58c
2 files changed
+14 -2774

No files matched your search

+14 -10
View File
@@ -69,22 +69,26 @@ AudioOutputI2SNoDAC: Abuses the I2S interface to play music without a DAC. Tur
AudioOutputSerialWAV: Writes a binary WAV format with headers to the Serial port. If you capture the serial output to a file you can play it back on your development system.
AudioOutputNull: Just dumps samples to /dev/null. Used for speed testing as it doesn't artificially limit the AudioGenerator output speed since there are no buffers to fill/drain.
## Software I2S Delta-Sigma DAC (i.e. playing music with a single transistor and speaker)
For the best fidelity, and stereo to boot, spend the money on a real I2S DAC. Adafruit makes a great mono one with amplifier, and you can find stereo unamplified ones on eBay or elsewhere quite cheaply. However, thanks to the software delta-sigma DAC with 32x oversampling (up to 128x if the audio rate is low enough) you can still have pretty good sound!
Use the AudioOutputI2S*No*DAC object instead of the AudioOutputI2SDAC in your code, and the following schematic to drive a 2-3W speaker using a single $0.05 NPN 2N3904 transistor:
````
ESP8266-I2SOUT (Rx) --+ 2N3904 (NPN)
| +------+
| | | +-|
| |E B C | / S|
| +|-|-|-+ | P|
+-------|-+ +------+ E|
| | A|
ESP8266-GND ---------------- GND +---+ K|
| \ R|
USB 5V ------------------------------+ +-|
2N3904 (NPN)
+---------+
| | +-|
| E B C | / S|
+-|--|--|-+ | P|
| | +------+ E|
| | | A|
ESP8266-GND ------------------+ | +------+ K|
| | | E|
ESP8266-I2SOUT (Rx) -------------+ | \ R|
| +-|
USB 5V -----------------------------+
You may also want to add a 220uF cap from USB5V to GND just to help filter out any voltage droop during high volume playback.
````
File diff suppressed because it is too large. Load diff