ESP32-C3 Support (#454)

* ESP32-C3 has no ULP coprocessor

Only the ESP32, ESP32-S2 and ESP32-S3 chips have an ULP coprocessor, ESP32-C3 doesn't have it. So exclude this code from compiling, as it cannot compile in the C3 environment.

* uint32_t and size_t is not the same on RISC-V

This change is necessary to be able to compile it on ESP32-C3

* uint32_t and size_t is not the same on RISC-V

The change is necessary to compile it on ESP32-C3

* ESP32-C3: I2S_MODE_DAC_BUILT_IN / I2S_MODE_PDM not available

On some ESP32 chips (e.g. ESP32-C3), builtin DAC is not possible as it lacks the hardware module. In order to be able to compile the library on ESP32-C3 the defines cannot be used.
This commit is contained in:
FedericoBusero authored and GitHub committed 2021-11-30 12:25:30 -08:00
1 parent 617b06d09a
commit 2c1aeba4ab
4 files changed
+16 -4

No files matched your search

+1 -1
View File
@@ -105,7 +105,7 @@ uint32_t AudioFileSourceSPIRAMBuffer::read(void *data, uint32_t len)
}
// Read up to the entire buffer from RAM
uint32_t toReadFromBuffer = std::min(len, writePtr - readPtr);
uint32_t toReadFromBuffer = std::min(len, (uint32_t)(writePtr - readPtr));
uint8_t *ptr = reinterpret_cast<uint8_t*>(data);
if (toReadFromBuffer > 0) {
#ifdef FAKERAM
+13 -1
View File
@@ -168,11 +168,19 @@ bool AudioOutputI2S::begin(bool txDAC)
i2s_mode_t mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_TX);
if (output_mode == INTERNAL_DAC)
{
#ifdef I2S_MODE_DAC_BUILT_IN
mode = (i2s_mode_t)(mode | I2S_MODE_DAC_BUILT_IN);
#else
return false;
#endif
}
else if (output_mode == INTERNAL_PDM)
if (output_mode == INTERNAL_PDM)
{
#ifdef I2S_MODE_PDM
mode = (i2s_mode_t)(mode | I2S_MODE_PDM);
#else
return false;
#endif
}
i2s_comm_format_t comm_fmt = (i2s_comm_format_t)(I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB);
@@ -199,8 +207,12 @@ bool AudioOutputI2S::begin(bool txDAC)
}
if (output_mode == INTERNAL_DAC || output_mode == INTERNAL_PDM)
{
#ifdef I2S_DAC_CHANNEL_BOTH_EN
i2s_set_pin((i2s_port_t)portNo, NULL);
i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
#else
return false;
#endif
}
else
{
+1 -1
View File
@@ -265,7 +265,7 @@ bool AudioOutputSPDIF::ConsumeSample(int16_t sample[2])
#if defined(ESP32)
// Assume DMA buffers are multiples of 16 bytes. Either we write all bytes or none.
uint32_t bytes_written;
size_t bytes_written;
esp_err_t ret = i2s_write((i2s_port_t)portNo, (const char*)&buf, 8 * channels, &bytes_written, 0);
// If we didn't write all bytes, return false early and do not increment frame_num
if ((ret != ESP_OK) || (bytes_written != (8 * channels))) return false;
+1 -1
View File
@@ -18,7 +18,7 @@
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef ESP32
#if CONFIG_IDF_TARGET_ESP32 || CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
#include "AudioOutputULP.h"
#include <esp32/ulp.h>