Update Proxmark command for dumping tags

Closes #9.
This commit is contained in:
Queen Vinyl Da.i'gyu-Kazotetsu committed 2026-02-27 05:46:51 -08:00
1 parent c0ecb5709d
commit c262fca886
2 files changed
+10 -2

No files matched your search

+1 -1
View File
@@ -69,7 +69,7 @@ A lot of the contents have been deciphered, but the more data we have, the easie
- An NFC/RFID reader that can read encrypted tags, such as...
- A Proxmark3-compatible RFID reader (recommended)
- The [proxmark3 (Iceman fork) software](https://github.com/RfidResearchGroup/proxmark3)
- Requires v4.20469 or higher
- Requires v4.21128 or higher
- You MUST use the Iceman fork as the original version of the software is unmaintained; all instructions and scripts are written for the Iceman fork and will NOT work on the original version
- A Flipper Zero (limited writing capabilities)
+9 -1
View File
@@ -26,12 +26,20 @@ As of Proxmark3 v4.20469, a new command has been implemented to scan a Bambu Lab
To scan a tag with this method, place the Proxmark3 device on the tag and run `pm3` in the terminal. Then, in the `pm3` prompt, run:
```
hf mf bambukeys -r -d
hf mf keygen -r -d -k 4
hf mf dump
```
This process should only take a few seconds. Once the process is complete, the dump will be saved to your current working directory.
> [!NOTE]
> The command was changed in Proxmark3 v4.21128. In previous versions, the commands were the following:
>
> ```
> hf mf bambukeys -r -d
> hf mf dump
> ```
## Deriving the keys
A way to derive the keys from the UID of an RFID tag was discovered, which unlocked the ability to scan and scrape RFID tag data without sniffing, as well as with other devices like the Flipper Zero. A script is included in the repository to derive the keys from the UID of a tag.