Moved online data URL to OpenTag Lite section
This commit is contained in:
1 parent
5f0ca9e59f
commit
191ad637ef
1 file changed
+28
-27
+28
-27
@@ -86,9 +86,9 @@ This is a list of data that will live on the RFID chip, separated into required
|
||||
|
||||
NTAG216 tags have 888 bytes of usable memory.
|
||||
|
||||
### Memory Map - Essential Data
|
||||
All chips MUST contain this information, otherwise they are considered non-compliant.
|
||||
### Memory Map - Open Tag Lite
|
||||
This is designed to fit within 144 bytes (address 0x10-0x9F), which is for NTAG213, the smallest and cheapest variant of compatible tags.
|
||||
|
||||
| Field | Data Type | Start Address | Size (bytes) | Usage | Example | Description |
|
||||
|---------------------------|-----------|----------------|---------------|----------------|--------------------------------|-------------|
|
||||
| Tag Format | String | 0x10 | 2 | Operational | `OT` | This is always "OT" for "Open Tag", this helps differentiate between the OpenTag and other formats. If a tag doesn't start with "OT", it is not OpenTag format. |
|
||||
@@ -102,7 +102,9 @@ This is designed to fit within 144 bytes (address 0x10-0x9F), which is for NTAG2
|
||||
| Print Temp (C) | Int | 0x52 | 2 | Operational | `210`, `240` | The recommended print temperature in degrees Celsius. |
|
||||
| Bed Temp (C) | Int | 0x54 | 2 | Operational | `60`, `80` | The recommended bed temperature in degrees Celsius. |
|
||||
| Density | Int | 0x56 | 2 | Operational | `1240`, `3900` | Filament density in µg (micrograms) per cubic centimeter. Eg `1240` -> `1.240g/cm³`. |
|
||||
| Reserved | N/A | 0x58–0x9F | N/A | N/A | N/A | Reserved for future use. This goes up to the memory limit of NTAG213. |
|
||||
| RESERVED | — | 0x58–0x6C | — | — | — | Reserved for future use. This goes up to the memory limit of NTAG213. |
|
||||
| Online Data URL | String | 0x6D | 32 | Operational | `pfil.us?i=8078-RQSR` | URL to access online JSON additional parameters. Formatted without `https` to save space. |
|
||||
|
||||
|
||||
### Memory Map - Extended Data
|
||||
This is additional data that not all manufacturers will implement, typically due to technological restrictions. These fields are populated if available. All unused fields must be populated with "-1" (all 1's in binary, eg 0xFFFFFFFFFFFFFFFF)
|
||||
@@ -110,30 +112,29 @@ This memory address starts at address 144, which is just outside the range of NT
|
||||
|
||||
We should do our best to remain within memory address, which has a max address of 0x20B.
|
||||
|
||||
| Field | Data Type | Start Address | Size (bytes) | Usage | Example | Description |
|
||||
|-----------------------------------|-----------|----------------|---------------|------------------|--------------------------|-------------|
|
||||
| Serial Number / Batch ID | String | 0xA0 | 16 | Operational | `1234-ABCD`, `2024-01-23-1234` | An identifier to represent a serial number or batch number from manufacturing. Stored as a string, and this format will vary from manufacturer to manufacturer. |
|
||||
| Manufacture Date | Int | 0xB0 | 4 | Operational | `20240123` | Date code in YYYYMMDD format, stored as a 32-bit integer. |
|
||||
| Manufacture Time | Int | 0xB4 | 3 | Operational | `103000`, `152301` | 24-hour time code in HHMMSS format (Hour, Minute, Second), specifying UTC. |
|
||||
| Spool Core Diameter (mm) | Int | 0xB7 | 1 | Operational | `100`, `80` | The diameter of the spool core. Used to estimate remaining filament based on encoder behavior. |
|
||||
| MFI Temp (°C) | Int | 0xB8 | 1 | Operational | `210` | Temperature in degrees Celsius at which the melt flow index was measured. |
|
||||
| MFI Load (×100g) | Int | 0xB9 | 1 | Operational | `216` | Load used in the MFI test, stored as centigrams. For 2.16kg, store `216`. |
|
||||
| MFI Value (×10 g/10min) | Int | 0xBA | 1 | Operational | `63` | Melt Flow Index value ×10. For example, 6.3 g/10min is stored as `63`. |
|
||||
| Tolerance (Measured) | Int | 0xBB | 1 | Operational | `20`, `55` | Actual measured tolerance in µm (micrometers). Unique per spool. If not recorded, leave as `0xFF`. |
|
||||
| Additional Data URL | String | 0xBC | 32 | Operational | `pfil.us?i=8078-RQSR` | URL to access JSON metadata. Formatted without `https` to save space. |
|
||||
| Empty Spool Weight (g) | Int | 0xDC | 2 | Operational | `105` | Empty spool weight in grams, used to estimate remaining filament. |
|
||||
| Filament Weight (Measured) | Int | 0xDE | 2 | Operational | `1002` | Measured filament weight in grams, excluding the spool. Not the target weight. |
|
||||
| Filament Length (Measured) | Int | 0xE0 | 2 | Operational | `336` | Measured filament length in meters, unique per spool. |
|
||||
| TD (Transmission Distance) | Int | 0xE2 | 2 | Operational | `2540` | Transmission Distance in µm. The thickness where no light passes. See HueForge. |
|
||||
| Color Hex | Int | 0xE4 | 3 | Operational | `0xffa64d` | RGB color in 3-byte hex format (`0xRRGGBB`). Used for UI or preview. |
|
||||
| Max Dry Temp (C) | Int | 0xE7 | 1 | Operational | `50`, `55` | Maximum drying temperature in °C. Drying above this temp may damage filament. |
|
||||
| Dry Time (Hours) | Int | 0xE8 | 1 | Operational | `4`, `8`, `12` | Recommended drying time in whole hours. |
|
||||
| Min Print Temp (°C) | Int | 0xE9 | 1 | Operational | `190` | Minimum recommended nozzle temperature for printing. |
|
||||
| Max Print Temp (°C) | Int | 0xEA | 1 | Operational | `225` | Maximum recommended nozzle temperature for printing. |
|
||||
| Volumetric Speed Min (×10 mm³/s) | Int | 0xEB | 1 | Operational | `20` | Minimum recommended volumetric speed, stored as mm³/s ×10. |
|
||||
| Volumetric Speed Max (×10 mm³/s) | Int | 0xEC | 1 | Operational | `120` | Maximum safe volumetric speed, stored as mm³/s ×10. |
|
||||
| Volumetric Speed Recommended | Int | 0xED | 1 | Operational | `80` | Recommended default volumetric speed, stored as mm³/s ×10. |
|
||||
| RESERVED | N/A | 0xEE-0x20B | N/A | N/A | N/A | Reserved for future use, this goes up to the memory limit of NTAG215 |
|
||||
| Field | Data Type | Start Address | Size (bytes) | Usage | Example | Description |
|
||||
|----------------------------------|-----------|---------------|---------------|--------------|--------------------------|-------------|
|
||||
| Serial Number / Batch ID | String | 0xA0 | 16 | Operational | `1234-ABCD`, `2024-01-23-1234` | An identifier to represent a serial number or batch number from manufacturing. Stored as a string, and this format will vary from manufacturer to manufacturer. |
|
||||
| Manufacture Date | Int | 0xB0 | 4 | Operational | `20240123` | Date code in YYYYMMDD format, stored as a 32-bit integer. |
|
||||
| Manufacture Time | Int | 0xB4 | 3 | Operational | `103000`, `152301` | 24-hour time code in HHMMSS format (Hour, Minute, Second), specifying UTC. |
|
||||
| Spool Core Diameter (mm) | Int | 0xB7 | 1 | Operational | `100`, `80` | The diameter of the spool core. Used to estimate remaining filament based on encoder behavior. |
|
||||
| MFI Temp (°C) | Int | 0xB8 | 1 | Operational | `210` | Temperature in degrees Celsius at which the melt flow index was measured. |
|
||||
| MFI Load (×100g) | Int | 0xB9 | 1 | Operational | `216` | Load used in the MFI test, stored as centigrams. For 2.16kg, store `216`. |
|
||||
| MFI Value (×10 g/10min) | Int | 0xBA | 1 | Operational | `63` | Melt Flow Index value ×10. For example, 6.3 g/10min is stored as `63`. |
|
||||
| Tolerance (Measured) | Int | 0xBB | 1 | Operational | `20`, `55` | Actual measured tolerance in µm (micrometers). Unique per spool. If not recorded, leave as 0xFF. |
|
||||
| Empty Spool Weight (g) | Int | 0xBC | 2 | Operational | `105` | Empty spool weight in grams, used to estimate remaining filament. |
|
||||
| Filament Weight (Measured) | Int | 0xBE | 2 | Operational | `1002` | Measured filament weight in grams, excluding the spool. Not the target weight. |
|
||||
| Filament Length (Measured) | Int | 0xC0 | 2 | Operational | `336` | Measured filament length in meters, unique per spool. |
|
||||
| TD (Transmission Distance) | Int | 0xC2 | 2 | Operational | `2540` | Transmission Distance in µm. The thickness where no light passes. See HueForge. |
|
||||
| Color Hex | Int | 0xC4 | 3 | Operational | `0xffa64d` | RGB color in 3-byte hex format (0xRRGGBB). Used for UI or preview. |
|
||||
| Max Dry Temp (°C) | Int | 0xC7 | 1 | Operational | `50`, `55` | Maximum drying temperature in °C. Drying above this temp may damage filament. |
|
||||
| Dry Time (Hours) | Int | 0xC8 | 1 | Operational | `4`, `8`, `12` | Recommended drying time in whole hours. |
|
||||
| Min Print Temp (°C) | Int | 0xC9 | 1 | Operational | `190` | Minimum recommended nozzle temperature for printing. |
|
||||
| Max Print Temp (°C) | Int | 0xCA | 1 | Operational | `225` | Maximum recommended nozzle temperature for printing. |
|
||||
| Volumetric Speed Min (×10 mm³/s) | Int | 0xCB | 1 | Operational | `20` | Minimum recommended volumetric speed, stored as mm³/s ×10. |
|
||||
| Volumetric Speed Max (×10 mm³/s) | Int | 0xCC | 1 | Operational | `120` | Maximum safe volumetric speed, stored as mm³/s ×10. |
|
||||
| Volumetric Speed Recommended | Int | 0xCD | 1 | Operational | `80` | Recommended default volumetric speed, stored as mm³/s ×10. |
|
||||
| RESERVED | — | 0xCE–0x1FF | — | — | — | Reserved for future use, this goes up to the memory limit of NTAG215. |
|
||||
|
||||
### Web API Standard
|
||||
Some tags can contain extended data that doesn't fit or doesn't belong on the RFID tag itself. One example is a diameter graph, which is too much data to be stored within only 888 bytes of memory.
|
||||
|
||||
Reference in new issue
Block a user