Ajout README.md

This commit is contained in:
Serge NOEL committed 2026-10-29 15:08:53 +01:00
1 parent b3061fa6fd
commit 644e2363f7
5 files changed
+160 -86

No files matched your search

+5 -5
View File
@@ -1,5 +1,5 @@
.pio
.vscode/.browse.c_cpp.db*
.vscode/c_cpp_properties.json
.vscode/launch.json
.vscode/ipch
.pio
.vscode/.browse.c_cpp.db*
.vscode/c_cpp_properties.json
.vscode/launch.json
.vscode/ipch
+11 -11
View File
@@ -1,11 +1,11 @@
{
// See http://go.microsoft.com/fwlink/?LinkId=827846
// for the documentation about the extensions.json format
"recommendations": [
"platformio.platformio-ide"
],
"unwantedRecommendations": [
"ms-vscode.cpptools-extension-pack",
"pioarduino.pioarduino-ide"
]
}
{
// See http://go.microsoft.com/fwlink/?LinkId=827846
// for the documentation about the extensions.json format
"recommendations": [
"platformio.platformio-ide"
],
"unwantedRecommendations": [
"ms-vscode.cpptools-extension-pack",
"pioarduino.pioarduino-ide"
]
}
+74
View File
@@ -0,0 +1,74 @@
# ESPTest
ESPTest est un exemple de firmware Arduino pour une carte **ESP32-S3 DevKitC-1**. Il configure le Wi-Fi, démarre un serveur web et met à disposition un tableau de bord avec une température simulée, une mise à jour du firmware par OTA et un terminal série accessible depuis le navigateur.
## Fonctionnalités
- **Configuration Wi-Fi** avec NetWizard : l'appareil se connecte au réseau mémorisé ou démarre le portail de configuration « My Device ».
- **Tableau de bord** ESP-DASH affichant une valeur de température simulée, actualisée toutes les trois secondes.
- **Mise à jour OTA** avec ElegantOTA.
- **Terminal série web** avec WebSerial. Les messages reçus dans le terminal sont également écrits sur le port série USB.
- **Serveur web asynchrone** sur le port 80.
## Matériel et prérequis
- Une carte ESP32-S3 DevKitC-1.
- [Visual Studio Code](https://code.visualstudio.com/) avec l'extension [PlatformIO IDE](https://platformio.org/install/ide?install=vscode), ou PlatformIO Core en ligne de commande.
- Un câble USB adapté à la carte.
- Un navigateur sur un appareil connecté au même réseau local que l'ESP32 pour accéder au tableau de bord.
Les bibliothèques nécessaires sont déclarées dans [`platformio.ini`](./platformio.ini) et PlatformIO les installe lors de la compilation.
## Compiler et téléverser
### Avec Visual Studio Code
1. Ouvrir le dossier du projet dans VS Code.
2. Laisser PlatformIO installer les dépendances.
3. Connecter la carte en USB.
4. Utiliser les actions PlatformIO **Build**, puis **Upload**.
5. Ouvrir le moniteur série à **115200 bauds** pour suivre le démarrage.
### En ligne de commande
Depuis la racine du projet :
```sh
pio run -e esp32-s3-devkitc-1
pio run -e esp32-s3-devkitc-1 -t upload
pio device monitor -b 115200
```
Si plusieurs ports série sont disponibles, sélectionner celui de la carte dans les paramètres de PlatformIO ou préciser le port avec `--port`.
## Première connexion et utilisation
1. Après démarrage, l'ESP32 se connecte au Wi-Fi mémorisé. Si aucun réseau enregistré n'est disponible, il lance le portail de configuration NetWizard nommé **My Device**.
2. Depuis un téléphone ou un ordinateur, rejoindre le point d'accès de configuration et suivre le portail pour fournir les identifiants du réseau Wi-Fi.
3. Une fois l'ESP32 connecté au réseau local, repérer son adresse IP dans le moniteur série ou dans la liste des appareils du routeur.
4. Ouvrir `http://<adresse-ip-de-l-esp32>/` dans un navigateur. La racine redirige vers le tableau de bord. Son URL directe est `http://<adresse-ip-de-l-esp32>/dashboard`.
Autres interfaces :
| Chemin | Fonction |
| --- | --- |
| `/dashboard` | Tableau de bord et valeur de température simulée |
| `/update` | Interface de mise à jour du firmware par OTA |
| `/webserial` | Terminal série dans le navigateur |
L'interface OTA et le terminal WebSerial sont accessibles depuis le réseau local de l'appareil. Pour les mises à jour OTA, utiliser un firmware compilé pour cette carte et suivre les indications de l'interface.
## Structure du projet
```text
.
├── platformio.ini # Carte, framework, dépendances et options de compilation
└── src/
└── main.cpp # Initialisation Wi-Fi et serveur, boucle et mise à jour du tableau de bord
```
## Configuration et personnalisation
- La carte cible, le débit série, les bibliothèques et les options de compilation se configurent dans [`platformio.ini`](./platformio.ini).
- Le nom du point d'accès, les routes web et la fréquence d'actualisation du tableau de bord se trouvent dans [`src/main.cpp`](./src/main.cpp).
- La température affichée est générée aléatoirement entre 0 et 49 ; elle ne provient pas d'un capteur physique.
+17 -17
View File
@@ -1,17 +1,17 @@
[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
monitor_speed = 115200
lib_compat_mode = strict
lib_deps =
ayushsharma82/NetWizard@2.0.0
ayushsharma82/ESP-DASH@5.0.2
ayushsharma82/ElegantOTA@4.0.0
ayushsharma82/WebSerial@2.1.2
build_flags =
-D NETWIZARD_USE_ASYNC_WEBSERVER=1
-D ELEGANTOTA_USE_ASYNC_WEBSERVER=1
[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
monitor_speed = 115200
lib_compat_mode = strict
lib_deps =
ayushsharma82/NetWizard@2.0.0
ayushsharma82/ESP-DASH@5.0.2
ayushsharma82/ElegantOTA@4.0.0
ayushsharma82/WebSerial@2.1.2
build_flags =
-D NETWIZARD_USE_ASYNC_WEBSERVER=1
-D ELEGANTOTA_USE_ASYNC_WEBSERVER=1
+53 -53
View File
@@ -1,54 +1,54 @@
#include <Arduino.h>
#include <WiFi.h>
#include <AsyncTCP.h>
#include <ESPAsyncWebServer.h>
#include <NetWizard.h> // NetWizard Pro: <NetWizardPro.h>
#include <ESPDash.h>
#include <ElegantOTA.h> // ElegantOTA Pro: <ElegantOTAPro.h>
#include <WebSerial.h>
AsyncWebServer server(80);
// WiFi provisioning: captive portal at / for access point clients
NetWizard NW(&server);
// Dashboard at /dashboard, so it does not conflict with the portal
ESPDash dashboard(server, "/dashboard", true);
dash::TemperatureCard temperature(dashboard, "Temperature");
unsigned long lastUpdate = 0;
void setup() {
Serial.begin(115200);
// Connect to the saved network, or start the captive portal
NW.setStrategy(NetWizardStrategy::BLOCKING);
NW.autoConnect("My Device", "");
// Over-the-air updates at /update
ElegantOTA.begin(&server);
// Remote serial terminal at /webserial
WebSerial.begin(&server);
WebSerial.onMessage([](const String& msg) {
Serial.println(msg);
});
// Show the dashboard at / for clients on the local network
server.rewrite("/", "/dashboard").setFilter(ON_STA_FILTER);
server.begin();
}
void loop() {
NW.loop();
ElegantOTA.loop();
WebSerial.loop();
if (millis() - lastUpdate > 3000) {
lastUpdate = millis();
temperature.setValue((int)random(0, 50));
dashboard.sendUpdates();
WebSerial.println("Dashboard updated");
}
#include <Arduino.h>
#include <WiFi.h>
#include <AsyncTCP.h>
#include <ESPAsyncWebServer.h>
#include <NetWizard.h> // NetWizard Pro: <NetWizardPro.h>
#include <ESPDash.h>
#include <ElegantOTA.h> // ElegantOTA Pro: <ElegantOTAPro.h>
#include <WebSerial.h>
AsyncWebServer server(80);
// WiFi provisioning: captive portal at / for access point clients
NetWizard NW(&server);
// Dashboard at /dashboard, so it does not conflict with the portal
ESPDash dashboard(server, "/dashboard", true);
dash::TemperatureCard temperature(dashboard, "Temperature");
unsigned long lastUpdate = 0;
void setup() {
Serial.begin(115200);
// Connect to the saved network, or start the captive portal
NW.setStrategy(NetWizardStrategy::BLOCKING);
NW.autoConnect("My Device", "");
// Over-the-air updates at /update
ElegantOTA.begin(&server);
// Remote serial terminal at /webserial
WebSerial.begin(&server);
WebSerial.onMessage([](const String& msg) {
Serial.println(msg);
});
// Show the dashboard at / for clients on the local network
server.rewrite("/", "/dashboard").setFilter(ON_STA_FILTER);
server.begin();
}
void loop() {
NW.loop();
ElegantOTA.loop();
WebSerial.loop();
if (millis() - lastUpdate > 3000) {
lastUpdate = millis();
temperature.setValue((int)random(0, 50));
dashboard.sendUpdates();
WebSerial.println("Dashboard updated");
}
}