1.6 KiB
1.6 KiB
HF_15SNIFF — ISO15693 Sniffer
Author: Nathan Glaser Frequency: HF (13.56 MHz) Hardware: RDV4 (flash recommended)
Back to Standalone Modes Index | Source Code | Development Guide
What
Passively sniffs ISO15693 communication between reader and tag, storing captured frames to flash.
Why
Capture and analyze the communication protocol between ISO15693 readers and tags for reverse engineering or security assessment.
How
Captures bidirectional 15693 frames with timestamps. Note: timestamp counter overflows after approximately 5 minutes 16 seconds of continuous sniffing.
LED Indicators
| LED | Meaning |
|---|---|
| 1 (A) | Sniffing active |
| 2 (B) | Tag command |
| 3 (C) | Reader command |
| 4 (D) | Flash sync |
Button Controls
| Action | Effect |
|---|---|
| Short press | Stop and save trace to flash |
State Machine
stateDiagram-v2
[*] --> Sniffing : Startup
Sniffing --> SaveTrace : Button press
SaveTrace --> [*] : Saved
note right of Sniffing
Timestamp overflow
at ~5min 16sec
end note
Compilation
make clean
make STANDALONE=HF_15SNIFF -j
./pm3-flash-fullimage
Related
- 14A Sniffer — ISO14443A sniffer
- 14B Sniffer — ISO14443B sniffer
- Universal Sniffer — Multi-protocol sniffer
- 15693 Simulator — ISO15693 dump and simulate