Files
proxmark3/include/em4x50.h
T
iceman1001andClaude Opus 5.5 1f543f3ced em4x50: reply deadline for read / info retries
The retry check estimated the next attempt from the longest one so far.
That does not bound it:
- get_pulse_length() waits up to 4 bit periods
- one find_double_listen_window() can take about 3.2 s with no signal
- a login + read attempt can take over 6 s
- setup before tstart was not counted

A slow attempt after fast failures could end after the client gave up,
leaving the late reply queued for the next command.

read and info now set a deadline after setup, 1 s before the client
timeout. The listen window, ACK and word decode loops stop at the
deadline, as do the retries. With no deadline set (write, brute, sim,
...) they behave as before. The client waits 5 s for read, as it
already did for info / dump.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 14:19:44 +07:00

95 lines
3.1 KiB
C

//-----------------------------------------------------------------------------
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// See LICENSE.txt for the text of the license.
//-----------------------------------------------------------------------------
// Low frequency EM4x50 structs
//-----------------------------------------------------------------------------
#ifndef EM4X50_H__
#define EM4X50_H__
#include "common.h"
#include "bruteforce.h"
#define EM4X50_NO_WORDS 34
#define EM4X50_SIZE_WORD 4
// special words
#define EM4X50_DEVICE_PASSWORD 0
#define EM4X50_PROTECTION 1
#define EM4X50_CONTROL 2
#define EM4X50_DEVICE_SERIAL 32
#define EM4X50_DEVICE_ID 33
// control word (word = 4 bytes)
#define FIRST_WORD_READ 0 // first byte
#define LAST_WORD_READ 1 // second byte
#define CONFIG_BLOCK 2 // third byte
#define PASSWORD_CHECK 0x80 // first bit in third byte
#define READ_AFTER_WRITE 0x40 // second bit in third byte
// protection word
#define FIRST_WORD_READ_PROTECTED 0 // first byte
#define LAST_WORD_READ_PROTECTED 1 // second byte
#define FIRST_WORD_WRITE_INHIBITED 2 // third byte
#define LAST_WORD_WRITE_INHIBITED 3 // fourth byte
// commands
#define EM4X50_COMMAND_LOGIN 0x01
#define EM4X50_COMMAND_RESET 0x80
#define EM4X50_COMMAND_WRITE 0x12
#define EM4X50_COMMAND_WRITE_PASSWORD 0x11
#define EM4X50_COMMAND_SELECTIVE_READ 0x0A
#define EM4X50_COMMAND_STANDARD_READ 0x02 // virtual command
// misc
#define EM4X50_TIMEOUT_CMD 3000
#define EM4X50_TIMEOUT_INFO 5000 // 34 words, with read retries
#define EM4X50_TIMEOUT_READ 5000 // read / info, device replies 1 s earlier
#define EM4X50_DUMP_FILESIZE 136
typedef struct {
bool addr_given;
bool pwd_given;
uint32_t password1;
uint32_t password2;
uint32_t word;
uint32_t addresses;
bruteforce_mode_t bruteforce_mode;
bruteforce_charset_t bruteforce_charset;
} PACKED em4x50_data_t;
typedef struct {
uint8_t byte[4];
} PACKED em4x50_word_t;
// CMD_LF_EM4X50_ESET payload
typedef struct {
uint16_t offset;
uint16_t len;
uint8_t data[];
} PACKED em4x50_eset_t;
typedef struct {
uint8_t count;
uint32_t *words;
} PACKED em4x50_read_data_response_t;
// Global variables...
extern bool g_Login;
extern bool g_WritePasswordProcess;
extern uint32_t g_Password;
#endif /* EM4X50_H__ */