Files
proxmark3/common_arm
iceman1001andClaude Opus 5.5 4c4a719686 PM5: skip the RSSI ADC re-init when the channel is unchanged
EmGetCmdTimeout() calls AdcSetupRssiChannel() before every listen. On
AT32 that resets the ADC, waits for ready, runs both calibration phases
and a blocking 640.5 cycle vref conversion, all before Uart14aInit and
before the SSC is read. The single byte SPI4 buffer overruns meanwhile,
so a reader frame sent close to the minimum FDT loses its start. Hardware
paced frames like the MIFARE auth nR/aR hit this; host paced activation
frames do not. The Miller decoder then syncs mid frame and logs short
fragments with parity errors.

Keep the full setup for the first call or a channel change. Otherwise
clear a stale conversion flag and restart the conversion. A dropped ADC
(RDY clear) still takes the full path. RDV4 is unaffected.

Reported in #3768.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 10:56:37 +07:00
..
2026-08-29 17:42:29 +02:00
2026-09-16 19:00:50 +02:00
2026-09-12 10:35:40 +02:00
2026-08-29 17:42:29 +02:00
2026-08-29 17:42:29 +02:00
2026-09-26 12:23:47 -04:00