Add an opt-in simulator probe that checks a reader's AES authentication continuation against a supplied candidate and stops before the final card response. Expose the result through the firmware protocol and etest bench command, and document the evidence and handshake scope. Co-Authored-By: OpenAI Codex <noreply@openai.com>
5495 lines
219 KiB
C
5495 lines
219 KiB
C
//-----------------------------------------------------------------------------
|
|
// Copyright (C) Jonathan Westhues, Nov 2006
|
|
// Copyright (C) Gerhard de Koning Gans - May 2008
|
|
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
|
|
//
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// See LICENSE.txt for the text of the license.
|
|
//-----------------------------------------------------------------------------
|
|
// Routines to support ISO 14443 type A.
|
|
//-----------------------------------------------------------------------------
|
|
#include "iso14443a.h"
|
|
|
|
#include "pm3_cmd.h"
|
|
#include "string.h"
|
|
#include "proxmark3_arm.h"
|
|
#include "cmd.h"
|
|
#include "appmain.h"
|
|
#include "BigBuf.h"
|
|
#include "fpga_loader.h"
|
|
#include "ticks_apis.h"
|
|
#include "fpga_apis.h"
|
|
#include "rssi_apis.h"
|
|
#include "dbprint.h"
|
|
#include "util.h"
|
|
#include "parity.h"
|
|
#include "mifareutil.h"
|
|
#include "commonutil.h"
|
|
#include "crc16.h"
|
|
#include "protocols.h"
|
|
#include "generator.h"
|
|
#include "desfire_crypto.h" // UL-C authentication helpers
|
|
#include "mifare.h" // for iso14a_polling_frame_t structure
|
|
#include "cmac_calc.h"
|
|
#include "usb_cdc_apis.h"
|
|
|
|
// Forward declaration: HID Config Card jam support (implemented in secc.c).
|
|
// Called from SniffIso14443a when param bit 0x04 is set.
|
|
bool hid_config_card_jam(const uint8_t *cmd, int len, uint8_t *dma_buf);
|
|
|
|
static uint32_t iso14a_timeout;
|
|
|
|
// the block number for the ISO14443-4 PCB
|
|
static uint8_t iso14_pcb_blocknum = 0;
|
|
|
|
// optional ATQA/SAK overrides for SimulateIso14443aInit (set via iso14a_set_atqa_sak_override)
|
|
static uint16_t s_atqa_override = 0;
|
|
static uint8_t s_sak_override = 0;
|
|
|
|
//
|
|
// ISO14443 timing:
|
|
//
|
|
// minimum time between the start bits of consecutive transfers from reader to tag: 7000 carrier (13.56MHz) cycles
|
|
#define REQUEST_GUARD_TIME (7000/16 + 1)
|
|
// minimum time between last modulation of tag and next start bit from reader to tag: 1172 carrier cycles
|
|
#define FRAME_DELAY_TIME_PICC_TO_PCD (1172/16 + 1)
|
|
// bool LastCommandWasRequest = false;
|
|
|
|
//
|
|
// Total delays including SSC-Transfers between ARM and FPGA. These are in carrier clock cycles (1/13,56MHz)
|
|
//
|
|
// When the PM acts as reader and is receiving tag data, it takes
|
|
// 3 ticks delay in the AD converter
|
|
// 16 ticks until the modulation detector completes and sets curbit
|
|
// 8 ticks until bit_to_arm is assigned from curbit
|
|
// 8*16 ticks for the transfer from FPGA to ARM
|
|
// 4*16 ticks until we measure the time
|
|
// - 8*16 ticks because we measure the time of the previous transfer
|
|
#define DELAY_AIR2ARM_AS_READER (3 + 16 + 8 + 8*16 + 4*16 - 8*16)
|
|
|
|
// When the PM acts as a reader and is sending, it takes
|
|
// 4*16 ticks until we can write data to the sending hold register
|
|
// 8*16 ticks until the SHR is transferred to the Sending Shift Register
|
|
// 8 ticks until the first transfer starts
|
|
// 8 ticks later the FPGA samples the data
|
|
// 1 tick to assign mod_sig_coil
|
|
#define DELAY_ARM2AIR_AS_READER (4*16 + 8*16 + 8 + 8 + 1)
|
|
|
|
// The FPGA will report its internal sending delay in
|
|
static uint16_t FpgaSendQueueDelay;
|
|
// the 5 first bits are the number of bits buffered in mod_sig_buf
|
|
// the last three bits are the remaining ticks/2 after the mod_sig_buf shift
|
|
#define DELAY_FPGA_QUEUE (FpgaSendQueueDelay<<1)
|
|
|
|
// When the PM acts as tag and is sending, it takes
|
|
// 4*16 + 8 ticks until we can write data to the sending hold register
|
|
// 8*16 ticks until the SHR is transferred to the Sending Shift Register
|
|
// 8 ticks later the FPGA samples the first data
|
|
// + 16 ticks until assigned to mod_sig
|
|
// + 1 tick to assign mod_sig_coil
|
|
// + a varying number of ticks in the FPGA Delay Queue (mod_sig_buf)
|
|
#define DELAY_ARM2AIR_AS_TAG (4*16 + 8 + 8*16 + 8 + 16 + 1 + DELAY_FPGA_QUEUE)
|
|
|
|
// When the PM acts as sniffer and is receiving tag data, it takes
|
|
// 3 ticks A/D conversion
|
|
// 14 ticks to complete the modulation detection
|
|
// 8 ticks (on average) until the result is stored in to_arm
|
|
// + the delays in transferring data - which is the same for
|
|
// sniffing reader and tag data and therefore not relevant
|
|
#define DELAY_TAG_AIR2ARM_AS_SNIFFER (3 + 14 + 8)
|
|
|
|
// When the PM acts as sniffer and is receiving reader data, it takes
|
|
// 2 ticks delay in analogue RF receiver (for the falling edge of the
|
|
// start bit, which marks the start of the communication)
|
|
// 3 ticks A/D conversion
|
|
// 8 ticks on average until the data is stored in to_arm.
|
|
// + the delays in transferring data - which is the same for
|
|
// sniffing reader and tag data and therefore not relevant
|
|
// Delay defined in iso14443a.h as DELAY_READER_AIR2ARM_AS_SNIFFER
|
|
|
|
//variables used for timing purposes:
|
|
//these are in ssp_clk cycles:
|
|
static uint32_t NextTransferTime;
|
|
static uint32_t LastTimeProxToAirStart;
|
|
static uint32_t LastProxToAirDuration;
|
|
|
|
// CARD TO READER - manchester
|
|
// Sequence D: 11110000 modulation with subcarrier during first half
|
|
// Sequence E: 00001111 modulation with subcarrier during second half
|
|
// Sequence F: 00000000 no modulation with subcarrier
|
|
// Sequence COLL: 11111111 load modulation over the full bitlength.
|
|
// Tricks the reader to think that multiple cards answer.
|
|
// (at least one card with 1 and at least one card with 0)
|
|
// READER TO CARD - miller
|
|
// Sequence X: 00001100 drop after half a period
|
|
// Sequence Y: 00000000 no drop
|
|
// Sequence Z: 11000000 drop at start
|
|
#define SEC_D 0xf0
|
|
#define SEC_E 0x0f
|
|
#define SEC_F 0x00
|
|
#define SEC_COLL 0xff
|
|
#define SEC_X 0x0c
|
|
#define SEC_Y 0x00
|
|
#define SEC_Z 0xc0
|
|
|
|
|
|
static const iso14a_polling_frame_t WUPA_CMD_FRAME = {
|
|
.frame = { ISO14443A_CMD_WUPA },
|
|
.frame_length = 1,
|
|
.last_byte_bits = 7,
|
|
.extra_delay = 0
|
|
};
|
|
|
|
static const iso14a_polling_frame_t MAGWUPA_CMD_FRAMES[] = {
|
|
{{ MAGSAFE_CMD_WUPA_1 }, 1, 7, 0},
|
|
{{ MAGSAFE_CMD_WUPA_2 }, 1, 7, 0},
|
|
{{ MAGSAFE_CMD_WUPA_3 }, 1, 7, 0},
|
|
{{ MAGSAFE_CMD_WUPA_4 }, 1, 7, 0}
|
|
};
|
|
|
|
// Polling frames and configurations
|
|
iso14a_polling_parameters_t WUPA_POLLING_PARAMETERS = {
|
|
.frames = { {{ ISO14443A_CMD_WUPA }, 1, 7, 0 }},
|
|
.frame_count = 1,
|
|
.extra_timeout = 0,
|
|
};
|
|
|
|
iso14a_polling_parameters_t REQA_POLLING_PARAMETERS = {
|
|
.frames = { {{ ISO14443A_CMD_REQA }, 1, 7, 0 }},
|
|
.frame_count = 1,
|
|
.extra_timeout = 0,
|
|
};
|
|
|
|
/*
|
|
Default HF 14a config is set to:
|
|
forceanticol = 0 (auto)
|
|
forcebcc = 0 (expect valid BCC)
|
|
forcecl2 = 0 (auto)
|
|
forcecl3 = 0 (auto)
|
|
forcerats = 0 (auto)
|
|
magsafe = 0 (disabled)
|
|
polling_loop_annotation = {{0}, 0, 0, 0} (disabled)
|
|
*/
|
|
static hf14a_config_t hf14aconfig = { 0, 0, 0, 0, 0, 0, {{0}, 0, 0, 0} };
|
|
|
|
static iso14a_polling_parameters_t hf14a_polling_parameters = {
|
|
.frames = { {{ ISO14443A_CMD_WUPA }, 1, 7, 0 }},
|
|
.frame_count = 1,
|
|
.extra_timeout = 0
|
|
};
|
|
|
|
|
|
// parity isn't used much
|
|
static uint8_t parity_array[MAX_PARITY_SIZE] = {0};
|
|
|
|
// crypto1 stuff
|
|
static uint8_t crypto1_auth_state = AUTH_FIRST;
|
|
static uint32_t crypto1_uid;
|
|
struct Crypto1State crypto1_state = {0, 0};
|
|
|
|
void printHf14aConfig(void) {
|
|
DbpString(_CYAN_("HF 14a config"));
|
|
Dbprintf(" [a] Anticol override........... %s%s%s",
|
|
(hf14aconfig.forceanticol == 0) ? _GREEN_("std") " ( follow standard )" : "",
|
|
(hf14aconfig.forceanticol == 1) ? _RED_("force") " ( always do anticol )" : "",
|
|
(hf14aconfig.forceanticol == 2) ? _RED_("skip") " ( always skip anticol )" : ""
|
|
);
|
|
Dbprintf(" [b] BCC override............... %s%s%s",
|
|
(hf14aconfig.forcebcc == 0) ? _GREEN_("std") " ( follow standard )" : "",
|
|
(hf14aconfig.forcebcc == 1) ? _RED_("fix") " ( fix bad BCC )" : "",
|
|
(hf14aconfig.forcebcc == 2) ? _RED_("ignore") " ( ignore bad BCC, always use card BCC )" : ""
|
|
);
|
|
Dbprintf(" [2] CL2 override............... %s%s%s",
|
|
(hf14aconfig.forcecl2 == 0) ? _GREEN_("std") " ( follow standard )" : "",
|
|
(hf14aconfig.forcecl2 == 1) ? _RED_("force") " ( always do CL2 )" : "",
|
|
(hf14aconfig.forcecl2 == 2) ? _RED_("skip") " ( always skip CL2 )" : ""
|
|
);
|
|
Dbprintf(" [3] CL3 override............... %s%s%s",
|
|
(hf14aconfig.forcecl3 == 0) ? _GREEN_("std") " ( follow standard )" : "",
|
|
(hf14aconfig.forcecl3 == 1) ? _RED_("force") " ( always do CL3 )" : "",
|
|
(hf14aconfig.forcecl3 == 2) ? _RED_("skip") " ( always skip CL3 )" : ""
|
|
);
|
|
Dbprintf(" [r] RATS override.............. %s%s%s",
|
|
(hf14aconfig.forcerats == 0) ? _GREEN_("std") " ( follow standard )" : "",
|
|
(hf14aconfig.forcerats == 1) ? _RED_("force") " ( always do RATS )" : "",
|
|
(hf14aconfig.forcerats == 2) ? _RED_("skip") " ( always skip RATS )" : ""
|
|
);
|
|
Dbprintf(" [m] Magsafe polling............ %s",
|
|
(hf14aconfig.magsafe == 1) ? _GREEN_("enabled") : _YELLOW_("disabled")
|
|
);
|
|
|
|
// no frame to show when it is off, and %*D defaults a zero width to 16 bytes
|
|
if (hf14aconfig.polling_loop_annotation.frame_length <= 0) {
|
|
Dbprintf(" [p] Polling loop annotation.... %s", _YELLOW_("disabled"));
|
|
} else {
|
|
Dbprintf(" [p] Polling loop annotation.... %s %*D",
|
|
_GREEN_("enabled"),
|
|
hf14aconfig.polling_loop_annotation.frame_length,
|
|
hf14aconfig.polling_loop_annotation.frame,
|
|
""
|
|
);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Called from the USB-handler to set the 14a configuration
|
|
* The 14a config is used for card selection sequence.
|
|
*
|
|
* Values set to '-1' implies no change
|
|
* @brief setSamplingConfig
|
|
* @param sc
|
|
*/
|
|
void setHf14aConfig(const hf14a_config_t *hc) {
|
|
if ((hc->forceanticol >= 0) && (hc->forceanticol <= 2)) {
|
|
hf14aconfig.forceanticol = hc->forceanticol;
|
|
}
|
|
|
|
if ((hc->forcebcc >= 0) && (hc->forcebcc <= 2)) {
|
|
hf14aconfig.forcebcc = hc->forcebcc;
|
|
}
|
|
|
|
if ((hc->forcecl2 >= 0) && (hc->forcecl2 <= 2)) {
|
|
hf14aconfig.forcecl2 = hc->forcecl2;
|
|
}
|
|
|
|
if ((hc->forcecl3 >= 0) && (hc->forcecl3 <= 2)) {
|
|
hf14aconfig.forcecl3 = hc->forcecl3;
|
|
}
|
|
|
|
if ((hc->forcerats >= 0) && (hc->forcerats <= 2)) {
|
|
hf14aconfig.forcerats = hc->forcerats;
|
|
}
|
|
|
|
if ((hc->magsafe >= 0) && (hc->magsafe <= 1)) {
|
|
hf14aconfig.magsafe = hc->magsafe;
|
|
}
|
|
|
|
if (hc->polling_loop_annotation.frame_length >= 0) {
|
|
memcpy(&hf14aconfig.polling_loop_annotation, &hc->polling_loop_annotation, sizeof(iso14a_polling_frame_t));
|
|
}
|
|
|
|
// iceman: Somehow I think we should memcpy WUPA_CMD and all other hf14a_polling_parameters.frames[xxx] assignments
|
|
// right now we are assigning...
|
|
|
|
// Derive polling loop configuration based on 14a config
|
|
hf14a_polling_parameters.frames[0] = WUPA_CMD_FRAME;
|
|
hf14a_polling_parameters.frame_count = 1;
|
|
hf14a_polling_parameters.extra_timeout = 0;
|
|
|
|
if (hf14aconfig.magsafe == 1) {
|
|
|
|
for (int i = 0; i < ARRAYLEN(MAGWUPA_CMD_FRAMES); i++) {
|
|
if (hf14a_polling_parameters.frame_count < ARRAYLEN(hf14a_polling_parameters.frames) - 1) {
|
|
hf14a_polling_parameters.frames[hf14a_polling_parameters.frame_count] = MAGWUPA_CMD_FRAMES[i];
|
|
hf14a_polling_parameters.frame_count++;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (hf14aconfig.polling_loop_annotation.frame_length > 0) {
|
|
|
|
if (hf14a_polling_parameters.frame_count < ARRAYLEN(hf14a_polling_parameters.frames) - 1) {
|
|
hf14a_polling_parameters.frames[hf14a_polling_parameters.frame_count] = hf14aconfig.polling_loop_annotation;
|
|
hf14a_polling_parameters.frame_count++;
|
|
}
|
|
hf14a_polling_parameters.extra_timeout = 250;
|
|
}
|
|
}
|
|
|
|
hf14a_config_t *getHf14aConfig(void) {
|
|
return &hf14aconfig;
|
|
}
|
|
|
|
void iso14a_set_trigger(bool enable) {
|
|
g_trigger = enable;
|
|
}
|
|
|
|
void iso14a_set_timeout(uint32_t timeout) {
|
|
iso14a_timeout = timeout + (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER) / 128 + 2;
|
|
}
|
|
|
|
uint32_t iso14a_get_timeout(void) {
|
|
return iso14a_timeout - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER) / 128 - 2;
|
|
}
|
|
|
|
void iso14a_rebase_transfer_time(void) {
|
|
//Restarting StartCountSspClk() resets NextTransferTime clock-counts to zero; retaining old value makes ReaderTransmit() wait stale time from previous APDU.
|
|
//Do not reset PCB or ATS state here.
|
|
NextTransferTime = 2 * DELAY_ARM2AIR_AS_READER;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Generate the parity value for a byte sequence
|
|
//-----------------------------------------------------------------------------
|
|
void GetParity(const uint8_t *pbtCmd, uint16_t len, uint8_t *par) {
|
|
uint16_t paritybit_cnt = 0;
|
|
uint16_t paritybyte_cnt = 0;
|
|
uint8_t parityBits = 0;
|
|
|
|
for (uint16_t i = 0; i < len; i++) {
|
|
// Generate the parity bits
|
|
parityBits |= ((oddparity8(pbtCmd[i])) << (7 - paritybit_cnt));
|
|
if (paritybit_cnt == 7) {
|
|
par[paritybyte_cnt] = parityBits; // save 8 Bits parity
|
|
parityBits = 0; // and advance to next Parity Byte
|
|
paritybyte_cnt++;
|
|
paritybit_cnt = 0;
|
|
} else {
|
|
paritybit_cnt++;
|
|
}
|
|
}
|
|
|
|
// save remaining parity bits
|
|
par[paritybyte_cnt] = parityBits;
|
|
}
|
|
|
|
|
|
//=============================================================================
|
|
// ISO 14443 Type A - Miller decoder
|
|
//=============================================================================
|
|
// Basics:
|
|
// This decoder is used when the PM3 acts as a tag.
|
|
// The reader will generate "pauses" by temporarily switching of the field.
|
|
// At the PM3 antenna we will therefore measure a modulated antenna voltage.
|
|
// The FPGA does a comparison with a threshold and would deliver e.g.:
|
|
// ........ 1 1 1 1 1 1 0 0 1 1 1 1 1 1 1 1 1 1 0 0 1 1 1 1 1 1 1 1 1 1 .......
|
|
// The Miller decoder needs to identify the following sequences:
|
|
// 2 (or 3) ticks pause followed by 6 (or 5) ticks unmodulated: pause at beginning - Sequence Z ("start of communication" or a "0")
|
|
// 8 ticks without a modulation: no pause - Sequence Y (a "0" or "end of communication" or "no information")
|
|
// 4 ticks unmodulated followed by 2 (or 3) ticks pause: pause in second half - Sequence X (a "1")
|
|
// Note 1: the bitstream may start at any time. We therefore need to sync.
|
|
// Note 2: the interpretation of Sequence Y and Z depends on the preceding sequence.
|
|
//-----------------------------------------------------------------------------
|
|
static tUart14a Uart;
|
|
|
|
// Lookup-Table to decide if 4 raw bits are a modulation.
|
|
// We accept the following:
|
|
// 0001 - a 3 tick wide pause
|
|
// 0011 - a 2 tick wide pause, or a three tick wide pause shifted left
|
|
// 0111 - a 2 tick wide pause shifted left
|
|
// 1001 - a 2 tick wide pause shifted right
|
|
static const bool Mod_Miller_LUT[] = {
|
|
false, true, false, true, false, false, false, true,
|
|
false, true, false, false, false, false, false, false
|
|
};
|
|
#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x000000F0) >> 4])
|
|
#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x0000000F)])
|
|
|
|
tUart14a *GetUart14a(void) {
|
|
return &Uart;
|
|
}
|
|
|
|
void Uart14aReset(void) {
|
|
Uart.state = STATE_14A_UNSYNCD;
|
|
Uart.shiftReg = 0; // shiftreg to hold decoded data bits
|
|
Uart.bitCount = 0;
|
|
Uart.len = 0; // number of decoded data bytes
|
|
Uart.posCnt = 0;
|
|
Uart.syncBit = 9999;
|
|
Uart.parityBits = 0; // holds 8 parity bits
|
|
Uart.parityLen = 0; // number of decoded parity bytes
|
|
Uart.fourBits = 0x00000000; // clear the buffer for 4 Bits
|
|
Uart.startTime = 0;
|
|
Uart.endTime = 0;
|
|
}
|
|
|
|
void Uart14aInit(uint8_t *d, uint16_t n, uint8_t *par) {
|
|
Uart.output_len = n;
|
|
Uart.output = d;
|
|
Uart.parity = par;
|
|
Uart14aReset();
|
|
}
|
|
|
|
// use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time
|
|
RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) {
|
|
|
|
if (Uart.len == Uart.output_len) {
|
|
return true;
|
|
}
|
|
|
|
Uart.fourBits = (Uart.fourBits << 8) | bit;
|
|
|
|
if (Uart.state == STATE_14A_UNSYNCD) { // not yet synced
|
|
Uart.syncBit = 9999; // not set
|
|
|
|
// 00x11111 2|3 ticks pause followed by 6|5 ticks unmodulated Sequence Z (a "0" or "start of communication")
|
|
// 11111111 8 ticks unmodulation Sequence Y (a "0" or "end of communication" or "no information")
|
|
// 111100x1 4 ticks unmodulated followed by 2|3 ticks pause Sequence X (a "1")
|
|
|
|
// The start bit is one ore more Sequence Y followed by a Sequence Z (... 11111111 00x11111). We need to distinguish from
|
|
// Sequence X followed by Sequence Y followed by Sequence Z (111100x1 11111111 00x11111)
|
|
// we therefore look for a ...xx1111 11111111 00x11111xxxxxx... pattern
|
|
// (12 '1's followed by 2 '0's, eventually followed by another '0', followed by 5 '1's)
|
|
#define ISO14443A_STARTBIT_MASK 0x07FFEF80 // mask is 00000111 11111111 11101111 10000000
|
|
#define ISO14443A_STARTBIT_PATTERN 0x07FF8F80 // pattern is 00000111 11111111 10001111 10000000
|
|
if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 0)) == ISO14443A_STARTBIT_PATTERN >> 0) Uart.syncBit = 7;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 1)) == ISO14443A_STARTBIT_PATTERN >> 1) Uart.syncBit = 6;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 2)) == ISO14443A_STARTBIT_PATTERN >> 2) Uart.syncBit = 5;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 3)) == ISO14443A_STARTBIT_PATTERN >> 3) Uart.syncBit = 4;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 4)) == ISO14443A_STARTBIT_PATTERN >> 4) Uart.syncBit = 3;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 5)) == ISO14443A_STARTBIT_PATTERN >> 5) Uart.syncBit = 2;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 6)) == ISO14443A_STARTBIT_PATTERN >> 6) Uart.syncBit = 1;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 7)) == ISO14443A_STARTBIT_PATTERN >> 7) Uart.syncBit = 0;
|
|
|
|
if (Uart.syncBit != 9999) { // found a sync bit
|
|
Uart.startTime = (non_real_time) ? non_real_time : (GetCountSspClk() & 0xfffffff8);
|
|
Uart.startTime -= Uart.syncBit;
|
|
Uart.endTime = Uart.startTime;
|
|
Uart.state = STATE_14A_START_OF_COMMUNICATION;
|
|
}
|
|
|
|
} else {
|
|
|
|
if (IsMillerModulationNibble1(Uart.fourBits >> Uart.syncBit)) {
|
|
|
|
if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation in both halves - error
|
|
Uart14aReset();
|
|
} else { // Modulation in first half = Sequence Z = logic "0"
|
|
|
|
if (Uart.state == STATE_14A_MILLER_X) { // error - must not follow after X
|
|
Uart14aReset();
|
|
} else {
|
|
Uart.bitCount++;
|
|
Uart.shiftReg = (Uart.shiftReg >> 1); // add a 0 to the shiftreg
|
|
Uart.state = STATE_14A_MILLER_Z;
|
|
Uart.endTime = Uart.startTime + 8 * (9 * Uart.len + Uart.bitCount + 1) - 6;
|
|
|
|
if (Uart.bitCount >= 9) { // if we decoded a full byte (including parity)
|
|
Uart.output[Uart.len++] = (Uart.shiftReg & 0xff);
|
|
Uart.parityBits <<= 1; // make room for the parity bit
|
|
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
|
|
Uart.bitCount = 0;
|
|
Uart.shiftReg = 0;
|
|
if ((Uart.len & 0x0007) == 0) { // every 8 data bytes
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
|
|
Uart.parityBits = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
|
|
if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1"
|
|
|
|
Uart.bitCount++;
|
|
Uart.shiftReg = (Uart.shiftReg >> 1) | 0x100; // add a 1 to the shiftreg
|
|
Uart.state = STATE_14A_MILLER_X;
|
|
Uart.endTime = Uart.startTime + 8 * (9 * Uart.len + Uart.bitCount + 1) - 2;
|
|
|
|
if (Uart.bitCount >= 9) { // if we decoded a full byte (including parity)
|
|
|
|
Uart.output[Uart.len++] = (Uart.shiftReg & 0xff);
|
|
Uart.parityBits <<= 1; // make room for the new parity bit
|
|
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
|
|
Uart.bitCount = 0;
|
|
Uart.shiftReg = 0;
|
|
|
|
if ((Uart.len & 0x0007) == 0) { // every 8 data bytes
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
|
|
Uart.parityBits = 0;
|
|
}
|
|
}
|
|
|
|
} else { // no modulation in both halves - Sequence Y
|
|
|
|
if (Uart.state == STATE_14A_MILLER_Z || Uart.state == STATE_14A_MILLER_Y) { // Y after logic "0" - End of Communication
|
|
|
|
Uart.state = STATE_14A_UNSYNCD;
|
|
Uart.bitCount--; // last "0" was part of EOC sequence
|
|
Uart.shiftReg <<= 1; // drop it
|
|
|
|
if (Uart.bitCount > 0) { // if we decoded some bits
|
|
Uart.shiftReg >>= (9 - Uart.bitCount); // right align them
|
|
Uart.output[Uart.len++] = (Uart.shiftReg & 0xff); // add last byte to the output
|
|
Uart.parityBits <<= 1; // add a (void) parity bit
|
|
Uart.parityBits <<= (8 - (Uart.len & 0x0007)); // left align parity bits
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store it
|
|
return true;
|
|
}
|
|
|
|
if (Uart.len & 0x0007) { // there are some parity bits to store
|
|
Uart.parityBits <<= (8 - (Uart.len & 0x0007)); // left align remaining parity bits
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store them
|
|
}
|
|
|
|
if (Uart.len) {
|
|
return true; // we are finished with decoding the raw data sequence
|
|
} else {
|
|
Uart14aReset(); // Nothing received - start over
|
|
return false;
|
|
}
|
|
}
|
|
|
|
if (Uart.state == STATE_14A_START_OF_COMMUNICATION) { // error - must not follow directly after SOC
|
|
Uart14aReset();
|
|
} else { // a logic "0"
|
|
|
|
Uart.bitCount++;
|
|
Uart.shiftReg >>= 1; // add a 0 to the shiftreg
|
|
Uart.state = STATE_14A_MILLER_Y;
|
|
|
|
if (Uart.bitCount >= 9) { // if we decoded a full byte (including parity)
|
|
|
|
Uart.output[Uart.len++] = (Uart.shiftReg & 0xff);
|
|
Uart.parityBits <<= 1; // make room for the parity bit
|
|
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
|
|
Uart.bitCount = 0;
|
|
Uart.shiftReg = 0;
|
|
|
|
// Every 8 data bytes, store 8 parity bits into a parity byte
|
|
if ((Uart.len & 0x0007) == 0) { // every 8 data bytes
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
|
|
Uart.parityBits = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return false; // not finished yet, need more data
|
|
}
|
|
|
|
//=============================================================================
|
|
// ISO 14443 Type A - Manchester decoder
|
|
//=============================================================================
|
|
// Basics:
|
|
// This decoder is used when the PM3 acts as a reader.
|
|
// The tag will modulate the reader field by asserting different loads to it. As a consequence, the voltage
|
|
// at the reader antenna will be modulated as well. The FPGA detects the modulation for us and would deliver e.g. the following:
|
|
// ........ 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 .......
|
|
// The Manchester decoder needs to identify the following sequences:
|
|
// 4 ticks modulated followed by 4 ticks unmodulated: Sequence D = 1 (also used as "start of communication")
|
|
// 4 ticks unmodulated followed by 4 ticks modulated: Sequence E = 0
|
|
// 8 ticks unmodulated: Sequence F = end of communication
|
|
// 8 ticks modulated: A collision. Save the collision position and treat as Sequence D
|
|
// Note 1: the bitstream may start at any time. We therefore need to sync.
|
|
// Note 2: parameter offset is used to determine the position of the parity bits (required for the anticollision command only)
|
|
static tDemod14a Demod;
|
|
|
|
// Lookup-Table to decide if 4 raw bits are a modulation.
|
|
// We accept three or four "1" in any position
|
|
static const bool Mod_Manchester_LUT[] = {
|
|
false, false, false, false, false, false, false, true,
|
|
false, false, false, true, false, true, true, true
|
|
};
|
|
|
|
#define IsManchesterModulationNibble1(b) (Mod_Manchester_LUT[(b & 0x00F0) >> 4])
|
|
#define IsManchesterModulationNibble2(b) (Mod_Manchester_LUT[(b & 0x000F)])
|
|
|
|
tDemod14a *GetDemod14a(void) {
|
|
return &Demod;
|
|
}
|
|
void Demod14aReset(void) {
|
|
Demod.state = DEMOD_14A_UNSYNCD;
|
|
Demod.twoBits = 0xFFFF; // buffer for 2 Bits
|
|
Demod.highCnt = 0;
|
|
Demod.bitCount = 0;
|
|
Demod.collisionPos = 0; // Position of collision bit
|
|
Demod.syncBit = 0xFFFF;
|
|
Demod.parityBits = 0;
|
|
Demod.parityLen = 0;
|
|
Demod.shiftReg = 0; // shiftreg to hold decoded data bits
|
|
Demod.samples = 0;
|
|
Demod.len = 0; // number of decoded data bytes
|
|
Demod.startTime = 0;
|
|
Demod.endTime = 0;
|
|
Demod.samples = 0;
|
|
}
|
|
|
|
void Demod14aInit(uint8_t *d, uint16_t n, uint8_t *par) {
|
|
// No ISO14443-A frame can be longer than MAX_FRAME_SIZE (FSD/FSC max out at 256 bytes),
|
|
// while callers happily pass PM3_CMD_DATA_SIZE sized receive buffers
|
|
Demod.output_len = MIN(n, MAX_FRAME_SIZE);
|
|
Demod.output = d;
|
|
Demod.parity = par;
|
|
Demod14aReset();
|
|
}
|
|
|
|
// use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time
|
|
static RAMFUNC int ManchesterDecodingEx(uint8_t bit, uint16_t offset, uint32_t non_real_time, bool no_parity) {
|
|
const uint8_t frame_bits = no_parity ? 8 : 9;
|
|
|
|
if (Demod.len == Demod.output_len) {
|
|
// Flush last parity bits
|
|
Demod.parityBits <<= (8 - (Demod.len & 0x0007)); // left align remaining parity bits
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
|
|
return true;
|
|
}
|
|
|
|
Demod.twoBits = (Demod.twoBits << 8) | bit;
|
|
|
|
if (Demod.state == DEMOD_14A_UNSYNCD) {
|
|
|
|
if (Demod.highCnt < 2) { // wait for a stable unmodulated signal
|
|
if (Demod.twoBits == 0x0000) {
|
|
Demod.highCnt++;
|
|
} else {
|
|
Demod.highCnt = 0;
|
|
}
|
|
} else {
|
|
Demod.syncBit = 0xFFFF; // not set
|
|
if ((Demod.twoBits & 0x7700) == 0x7000) Demod.syncBit = 7;
|
|
else if ((Demod.twoBits & 0x3B80) == 0x3800) Demod.syncBit = 6;
|
|
else if ((Demod.twoBits & 0x1DC0) == 0x1C00) Demod.syncBit = 5;
|
|
else if ((Demod.twoBits & 0x0EE0) == 0x0E00) Demod.syncBit = 4;
|
|
else if ((Demod.twoBits & 0x0770) == 0x0700) Demod.syncBit = 3;
|
|
else if ((Demod.twoBits & 0x03B8) == 0x0380) Demod.syncBit = 2;
|
|
else if ((Demod.twoBits & 0x01DC) == 0x01C0) Demod.syncBit = 1;
|
|
else if ((Demod.twoBits & 0x00EE) == 0x00E0) Demod.syncBit = 0;
|
|
if (Demod.syncBit != 0xFFFF) {
|
|
Demod.startTime = non_real_time ? non_real_time : (GetCountSspClk() & 0xfffffff8);
|
|
Demod.startTime -= Demod.syncBit;
|
|
Demod.bitCount = offset; // number of decoded data bits
|
|
Demod.state = DEMOD_14A_MANCHESTER_DATA;
|
|
}
|
|
}
|
|
} else {
|
|
|
|
if (IsManchesterModulationNibble1(Demod.twoBits >> Demod.syncBit)) { // modulation in first half
|
|
if (IsManchesterModulationNibble2(Demod.twoBits >> Demod.syncBit)) { // ... and in second half = collision
|
|
if (Demod.collisionPos == 0) {
|
|
Demod.collisionPos = (Demod.len << 3) + Demod.bitCount;
|
|
}
|
|
} // modulation in first half only - Sequence D = 1
|
|
Demod.bitCount++;
|
|
Demod.shiftReg = (Demod.shiftReg >> 1) | 0x100; // in both cases, add a 1 to the shiftreg
|
|
if (Demod.bitCount == frame_bits) { // if we decoded a full byte (including parity)
|
|
Demod.output[Demod.len++] = ((Demod.shiftReg >> (no_parity ? 1 : 0)) & 0xff);
|
|
Demod.parityBits <<= 1; // make room for the parity bit
|
|
Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
|
|
Demod.bitCount = 0;
|
|
Demod.shiftReg = 0;
|
|
if ((Demod.len & 0x0007) == 0) { // every 8 data bytes
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // store 8 parity bits
|
|
Demod.parityBits = 0;
|
|
}
|
|
}
|
|
Demod.endTime = Demod.startTime + 8 * (frame_bits * Demod.len + Demod.bitCount + 1) - 4;
|
|
} else { // no modulation in first half
|
|
if (IsManchesterModulationNibble2(Demod.twoBits >> Demod.syncBit)) { // and modulation in second half = Sequence E = 0
|
|
Demod.bitCount++;
|
|
Demod.shiftReg = (Demod.shiftReg >> 1); // add a 0 to the shiftreg
|
|
if (Demod.bitCount >= frame_bits) { // if we decoded a full byte (including parity)
|
|
Demod.output[Demod.len++] = ((Demod.shiftReg >> (no_parity ? 1 : 0)) & 0xff);
|
|
Demod.parityBits <<= 1; // make room for the new parity bit
|
|
Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
|
|
Demod.bitCount = 0;
|
|
Demod.shiftReg = 0;
|
|
if ((Demod.len & 0x0007) == 0) { // every 8 data bytes
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // store 8 parity bits1
|
|
Demod.parityBits = 0;
|
|
}
|
|
}
|
|
Demod.endTime = Demod.startTime + 8 * (frame_bits * Demod.len + Demod.bitCount + 1);
|
|
} else { // no modulation in both halves - End of communication
|
|
|
|
if (Demod.bitCount > 0) { // there are some remaining data bits
|
|
Demod.shiftReg >>= (9 - Demod.bitCount); // right align the decoded bits
|
|
Demod.output[Demod.len++] = (Demod.shiftReg & 0xff); // and add them to the output
|
|
Demod.parityBits <<= 1; // add a (void) parity bit
|
|
Demod.parityBits <<= (8 - (Demod.len & 0x0007)); // left align remaining parity bits
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
|
|
return true;
|
|
} else if (Demod.len & 0x0007) { // there are some parity bits to store
|
|
Demod.parityBits <<= (8 - (Demod.len & 0x0007)); // left align remaining parity bits
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
|
|
}
|
|
|
|
if (Demod.len) {
|
|
return true; // we are finished with decoding the raw data sequence
|
|
} else { // nothing received. Start over
|
|
Demod14aReset();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return false; // not finished yet, need more data
|
|
}
|
|
|
|
|
|
RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non_real_time) {
|
|
return ManchesterDecodingEx(bit, offset, non_real_time, false);
|
|
}
|
|
|
|
// Thinfilm, Kovio mangles ISO14443A in the way that they don't use start bit nor parity bits.
|
|
// non_real_time is the sample count to timestamp with when called from a DMA sniff
|
|
// loop, where GetCountSspClk() has already run on past the frame. 0 = read the clock.
|
|
RAMFUNC int ManchesterDecoding_Thinfilm(uint8_t bit, uint32_t non_real_time) {
|
|
|
|
if (Demod.len == Demod.output_len) {
|
|
// Flush last parity bits. Thinfilm has no parity bits and passes a NULL buffer
|
|
if (Demod.parity != NULL) {
|
|
Demod.parityBits <<= (8 - (Demod.len & 0x0007)); // left align remaining parity bits
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
|
|
}
|
|
return true;
|
|
}
|
|
|
|
Demod.twoBits = (Demod.twoBits << 8) | bit;
|
|
|
|
if (Demod.state == DEMOD_14A_UNSYNCD) {
|
|
|
|
if (Demod.highCnt < 2) { // wait for a stable unmodulated signal
|
|
|
|
if (Demod.twoBits == 0x0000) {
|
|
Demod.highCnt++;
|
|
} else {
|
|
Demod.highCnt = 0;
|
|
}
|
|
|
|
} else {
|
|
Demod.syncBit = 0xFFFF; // not set
|
|
if ((Demod.twoBits & 0x7700) == 0x7000) Demod.syncBit = 7;
|
|
else if ((Demod.twoBits & 0x3B80) == 0x3800) Demod.syncBit = 6;
|
|
else if ((Demod.twoBits & 0x1DC0) == 0x1C00) Demod.syncBit = 5;
|
|
else if ((Demod.twoBits & 0x0EE0) == 0x0E00) Demod.syncBit = 4;
|
|
else if ((Demod.twoBits & 0x0770) == 0x0700) Demod.syncBit = 3;
|
|
else if ((Demod.twoBits & 0x03B8) == 0x0380) Demod.syncBit = 2;
|
|
else if ((Demod.twoBits & 0x01DC) == 0x01C0) Demod.syncBit = 1;
|
|
else if ((Demod.twoBits & 0x00EE) == 0x00E0) Demod.syncBit = 0;
|
|
|
|
if (Demod.syncBit != 0xFFFF) {
|
|
Demod.startTime = non_real_time ? non_real_time : (GetCountSspClk() & 0xfffffff8);
|
|
Demod.startTime -= Demod.syncBit;
|
|
Demod.bitCount = 1; // number of decoded data bits
|
|
Demod.shiftReg = 1;
|
|
Demod.state = DEMOD_14A_MANCHESTER_DATA;
|
|
}
|
|
}
|
|
|
|
} else {
|
|
|
|
if (IsManchesterModulationNibble1(Demod.twoBits >> Demod.syncBit)) { // modulation in first half
|
|
|
|
if (IsManchesterModulationNibble2(Demod.twoBits >> Demod.syncBit)) { // ... and in second half = collision
|
|
if (Demod.collisionPos == 0) {
|
|
Demod.collisionPos = (Demod.len << 3) + Demod.bitCount;
|
|
}
|
|
} // modulation in first half only - Sequence D = 1
|
|
Demod.bitCount++;
|
|
Demod.shiftReg = (Demod.shiftReg << 1) | 0x1; // in both cases, add a 1 to the shiftreg
|
|
|
|
if (Demod.bitCount == 8) { // if we decoded a full byte
|
|
Demod.output[Demod.len++] = (Demod.shiftReg & 0xFF);
|
|
Demod.bitCount = 0;
|
|
Demod.shiftReg = 0;
|
|
}
|
|
|
|
Demod.endTime = Demod.startTime + 8 * (8 * Demod.len + Demod.bitCount + 1) - 4;
|
|
|
|
} else { // no modulation in first half
|
|
|
|
if (IsManchesterModulationNibble2(Demod.twoBits >> Demod.syncBit)) { // and modulation in second half = Sequence E = 0
|
|
Demod.bitCount++;
|
|
Demod.shiftReg = (Demod.shiftReg << 1); // add a 0 to the shiftreg
|
|
if (Demod.bitCount >= 8) { // if we decoded a full byte
|
|
Demod.output[Demod.len++] = (Demod.shiftReg & 0xFF);
|
|
Demod.bitCount = 0;
|
|
Demod.shiftReg = 0;
|
|
}
|
|
Demod.endTime = Demod.startTime + 8 * (8 * Demod.len + Demod.bitCount + 1);
|
|
|
|
} else { // no modulation in both halves - End of communication
|
|
|
|
if (Demod.bitCount) { // there are some remaining data bits
|
|
Demod.shiftReg <<= (8 - Demod.bitCount); // left align the decoded bits
|
|
Demod.output[Demod.len++] = Demod.shiftReg & 0xFF; // and add them to the output
|
|
return true;
|
|
}
|
|
|
|
if (Demod.len) {
|
|
return true; // we are finished with decoding the raw data sequence
|
|
} else { // nothing received. Start over
|
|
Demod14aReset();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return false; // not finished yet, need more data
|
|
}
|
|
|
|
//=============================================================================
|
|
// Finally, a `sniffer' for ISO 14443 Type A
|
|
// Both sides of communication!
|
|
//=============================================================================
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Record the sequence of commands sent by the reader to the tag, with
|
|
// triggering so that we start recording at the point that the tag is moved
|
|
// near the reader.
|
|
// "hf 14a sniff"
|
|
//-----------------------------------------------------------------------------
|
|
int RAMFUNC SniffIso14443a(uint8_t param) {
|
|
LEDsoff();
|
|
// param:
|
|
// bit 0 - trigger from first card answer
|
|
// bit 1 - trigger from first reader 7-bit request
|
|
iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
|
|
|
|
// Allocate memory from BigBuf for some buffers
|
|
// free all previous allocations first
|
|
BigBuf_free();
|
|
BigBuf_Clear_ext(false);
|
|
set_tracing(true);
|
|
|
|
// The command (reader -> tag) that we're receiving.
|
|
uint8_t *receivedCmd = BigBuf_calloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedCmdPar = BigBuf_calloc(MAX_PARITY_SIZE);
|
|
|
|
// The response (tag -> reader) that we're receiving.
|
|
uint8_t *receivedResp = BigBuf_calloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedRespPar = BigBuf_calloc(MAX_PARITY_SIZE);
|
|
|
|
if (receivedCmd == NULL || receivedCmdPar == NULL || receivedResp == NULL || receivedRespPar == NULL) {
|
|
if (g_dbglevel >= DBG_ERROR) DbpString("Sniff 14a: failed to allocate buffers");
|
|
BigBuf_free();
|
|
return PM3_EMALLOC;
|
|
}
|
|
|
|
uint8_t previous_data = 0;
|
|
int dataLen;
|
|
bool TagIsActive = false;
|
|
bool ReaderIsActive = false;
|
|
|
|
// Set up the demodulator for tag -> reader responses.
|
|
Demod14aInit(receivedResp, MAX_FRAME_SIZE, receivedRespPar);
|
|
|
|
// Set up the demodulator for the reader -> tag commands
|
|
Uart14aInit(receivedCmd, MAX_FRAME_SIZE, receivedCmdPar);
|
|
|
|
if (g_dbglevel >= DBG_INFO) {
|
|
DbpString("Press " _GREEN_("pm3 button") " to abort sniffing");
|
|
}
|
|
|
|
// The DMA buffer, used to stream samples from the FPGA
|
|
dmabuf8_t *dma = get_dma8();
|
|
uint8_t *data = dma->buf;
|
|
|
|
// Setup and start DMA.
|
|
if (FpgaSetupSscRxDmaRepeat((uint8_t *) dma->buf, DMA_BUFFER_SIZE) == false) {
|
|
if (g_dbglevel > DBG_ERROR) Dbprintf("FpgaSetupSscRxDmaRepeat failed. Exiting");
|
|
return PM3_EIO;
|
|
}
|
|
|
|
// We won't start recording the frames that we acquire until we trigger;
|
|
// a good trigger condition to get started is probably when we see a
|
|
// response from the tag.
|
|
// triggered == false -- to wait first for card
|
|
bool triggered = !(param & 0x03);
|
|
|
|
uint32_t rx_samples = 0;
|
|
uint32_t overrun_skips = 0;
|
|
uint32_t dma_stalls = 0;
|
|
uint16_t checker = 12000;
|
|
|
|
// loop and listen
|
|
while (BUTTON_PRESS() == false) {
|
|
WDT_HIT();
|
|
LED_A_ON();
|
|
|
|
if (checker-- == 0) {
|
|
if (data_available()) {
|
|
break;
|
|
}
|
|
checker = 12000;
|
|
}
|
|
|
|
register int readBufDataP = data - dma->buf;
|
|
register int dmaBufDataP = DMA_BUFFER_SIZE - FPGA_SSC_DMA_RX_Remaining_Count();
|
|
if (readBufDataP <= dmaBufDataP) {
|
|
dataLen = dmaBufDataP - readBufDataP;
|
|
} else {
|
|
dataLen = DMA_BUFFER_SIZE - readBufDataP + dmaBufDataP;
|
|
}
|
|
|
|
// DMA fully stalled: both buffers exhausted. Re-arm primary + secondary,
|
|
// resync the read pointer, and drop the in-flight frame.
|
|
if (FPGA_SSC_DMA_RX_Primary_Done()) {
|
|
FPGA_SSC_DMA_RX_Refresh_Both(dma->buf, DMA_BUFFER_SIZE);
|
|
data = dma->buf;
|
|
rx_samples += DMA_BUFFER_SIZE;
|
|
Uart14aReset();
|
|
Demod14aReset();
|
|
dma_stalls++;
|
|
continue;
|
|
}
|
|
|
|
// Fell behind the DMA write pointer; skip to catch up rather than abort.
|
|
if (dataLen > (9 * DMA_BUFFER_SIZE / 10)) {
|
|
data = dma->buf + dmaBufDataP;
|
|
if (data == dma->buf + DMA_BUFFER_SIZE) {
|
|
data = dma->buf;
|
|
}
|
|
rx_samples += dataLen;
|
|
Uart14aReset();
|
|
Demod14aReset();
|
|
overrun_skips++;
|
|
continue;
|
|
}
|
|
|
|
// The MCU is processing data fast enough that the DMA has not yet received any new data.
|
|
if (dataLen < 1) {
|
|
continue;
|
|
}
|
|
|
|
// secondary buffer exhausted, primary still running — refill secondary
|
|
if (FPGA_SSC_DMA_RX_Secondary_Done()) {
|
|
FPGA_SSC_DMA_RX_Refresh_Secondary(dma->buf, DMA_BUFFER_SIZE);
|
|
}
|
|
|
|
LED_A_OFF();
|
|
|
|
// Need two samples to feed Miller and Manchester-Decoder
|
|
if (rx_samples & 0x01) {
|
|
|
|
// Reader -> Tag
|
|
// no need to try decoding reader data if the tag is sending
|
|
if (TagIsActive == false) {
|
|
|
|
uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4);
|
|
|
|
if (MillerDecoding(readerdata, (rx_samples - 1) * 4)) {
|
|
LED_C_ON();
|
|
|
|
// check - if there is a short 7bit request from reader
|
|
if ((!triggered) && (param & 0x02) && (Uart.len == 1) && (Uart.bitCount == 7)) {
|
|
triggered = true;
|
|
}
|
|
|
|
if (triggered) {
|
|
if (!LogTrace(receivedCmd,
|
|
Uart.len,
|
|
Uart.startTime * 16 - DELAY_READER_AIR2ARM_AS_SNIFFER,
|
|
Uart.endTime * 16 - DELAY_READER_AIR2ARM_AS_SNIFFER,
|
|
Uart.parity,
|
|
true)) {
|
|
break;
|
|
}
|
|
}
|
|
// HID Config Card jam: respond to A0 D4 00 00 00 in-band
|
|
if ((param & 0x04) && Uart.len >= 8) {
|
|
if (hid_config_card_jam(receivedCmd, Uart.len, (uint8_t *)dma->buf))
|
|
data = dma->buf;
|
|
}
|
|
// ready to receive another command
|
|
Uart14aReset();
|
|
// reset the demod code, which might have been
|
|
// false-triggered by the commands from the reader
|
|
Demod14aReset();
|
|
LED_B_OFF();
|
|
}
|
|
ReaderIsActive = (Uart.state != STATE_14A_UNSYNCD);
|
|
}
|
|
|
|
// Tag -> Reader
|
|
// no need to try decoding tag data if the reader is sending - and we cannot afford the time
|
|
if (ReaderIsActive == false) {
|
|
|
|
uint8_t tagdata = (previous_data << 4) | (*data & 0x0F);
|
|
|
|
if (ManchesterDecoding(tagdata, 0, (rx_samples - 1) * 4)) {
|
|
|
|
LED_B_ON();
|
|
|
|
if (!LogTrace(receivedResp,
|
|
Demod.len,
|
|
Demod.startTime * 16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
|
|
Demod.endTime * 16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
|
|
Demod.parity,
|
|
false)) break;
|
|
|
|
if ((!triggered) && (param & 0x01)) {
|
|
triggered = true;
|
|
}
|
|
|
|
// ready to receive another response.
|
|
Demod14aReset();
|
|
// reset the Miller decoder including its (now outdated) input buffer
|
|
Uart14aReset();
|
|
//Uart14aInit(receivedCmd, MAX_FRAME_SIZE, receivedCmdPar);
|
|
LED_C_OFF();
|
|
}
|
|
TagIsActive = (Demod.state != DEMOD_14A_UNSYNCD);
|
|
}
|
|
}
|
|
|
|
previous_data = *data;
|
|
rx_samples++;
|
|
data++;
|
|
if (data == dma->buf + DMA_BUFFER_SIZE) {
|
|
data = dma->buf;
|
|
}
|
|
} // end main loop
|
|
|
|
FpgaDisableTracing();
|
|
|
|
if (g_dbglevel >= DBG_ERROR) {
|
|
Dbprintf("trace len = " _YELLOW_("%d"), BigBuf_get_traceLen());
|
|
if (overrun_skips || dma_stalls) {
|
|
Dbprintf(_RED_("[!] sniffer dropped frames") " | overrun recoveries " _YELLOW_("%u") " | DMA stalls " _YELLOW_("%u"),
|
|
overrun_skips, dma_stalls);
|
|
}
|
|
}
|
|
switch_off();
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Prepare tag messages
|
|
//-----------------------------------------------------------------------------
|
|
static void CodeIso14443aAsTagPar(const uint8_t *cmd, uint16_t len, const uint8_t *par, bool collision) {
|
|
|
|
tosend_reset();
|
|
|
|
tosend_t *ts = get_tosend();
|
|
|
|
// Each input byte produces 9 entries (8 data + 1 parity), plus
|
|
// 1 correction byte + 1 start + 1 stop = 3 + 9*len total.
|
|
// Reject frames that would overflow the tosend buffer.
|
|
if (3 + (9 * (int)len) > TOSEND_BUFFER_SIZE) {
|
|
Dbprintf("CodeIso14443aAsTagPar: frame too large (%u bytes, max %u)",
|
|
len, (TOSEND_BUFFER_SIZE - 3) / 9);
|
|
return;
|
|
}
|
|
|
|
// Correction bit, might be removed when not needed
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(1); // <-----
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
|
|
// Send startbit
|
|
ts->buf[++ts->max] = SEC_D;
|
|
LastProxToAirDuration = 8 * ts->max - 4;
|
|
|
|
for (uint16_t i = 0; i < len; i++) {
|
|
uint8_t b = cmd[i];
|
|
|
|
// Data bits
|
|
for (uint16_t j = 0; j < 8; j++) {
|
|
if (collision) {
|
|
ts->buf[++ts->max] = SEC_COLL;
|
|
} else {
|
|
if (b & 1) {
|
|
ts->buf[++ts->max] = SEC_D;
|
|
} else {
|
|
ts->buf[++ts->max] = SEC_E;
|
|
}
|
|
b >>= 1;
|
|
}
|
|
}
|
|
|
|
if (collision) {
|
|
ts->buf[++ts->max] = SEC_COLL;
|
|
LastProxToAirDuration = 8 * ts->max;
|
|
} else {
|
|
// Get the parity bit
|
|
if (par[i >> 3] & (0x80 >> (i & 0x0007))) {
|
|
ts->buf[++ts->max] = SEC_D;
|
|
LastProxToAirDuration = 8 * ts->max - 4;
|
|
} else {
|
|
ts->buf[++ts->max] = SEC_E;
|
|
LastProxToAirDuration = 8 * ts->max;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Send stopbit
|
|
ts->buf[++ts->max] = SEC_F;
|
|
|
|
// Convert from last byte pos to length
|
|
ts->max++;
|
|
}
|
|
|
|
static void CodeIso14443aAsTagEx(const uint8_t *cmd, uint16_t len, bool collision) {
|
|
GetParity(cmd, len, parity_array);
|
|
CodeIso14443aAsTagPar(cmd, len, parity_array, collision);
|
|
}
|
|
static void CodeIso14443aAsTag(const uint8_t *cmd, uint16_t len) {
|
|
CodeIso14443aAsTagEx(cmd, len, false);
|
|
}
|
|
|
|
static void Code4bitAnswerAsTag(uint8_t cmd) {
|
|
uint8_t b = cmd;
|
|
|
|
tosend_reset();
|
|
|
|
tosend_t *ts = get_tosend();
|
|
|
|
// Correction bit, might be removed when not needed
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(1); // 1
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
|
|
// Send startbit
|
|
ts->buf[++ts->max] = SEC_D;
|
|
|
|
for (uint8_t i = 0; i < 4; i++) {
|
|
if (b & 1) {
|
|
ts->buf[++ts->max] = SEC_D;
|
|
LastProxToAirDuration = 8 * ts->max - 4;
|
|
} else {
|
|
ts->buf[++ts->max] = SEC_E;
|
|
LastProxToAirDuration = 8 * ts->max;
|
|
}
|
|
b >>= 1;
|
|
}
|
|
|
|
// Send stopbit
|
|
ts->buf[++ts->max] = SEC_F;
|
|
|
|
// Convert from last byte pos to length
|
|
ts->max++;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Wait for commands from reader
|
|
// stop when button is pressed or client usb connection resets
|
|
// or return TRUE when command is captured
|
|
//-----------------------------------------------------------------------------
|
|
bool GetIso14443aCommandFromReader(uint8_t *received, uint16_t received_maxlen, uint8_t *par, int *len) {
|
|
// Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen
|
|
// only, since we are receiving, not transmitting).
|
|
// Signal field is off with the appropriate LED
|
|
LED_D_OFF();
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
// Now run a `software UART` on the stream of incoming samples.
|
|
Uart14aInit(received, received_maxlen, par);
|
|
|
|
// clear RXRDY:
|
|
uint8_t b = (uint8_t)FPGA_SSC_RX_Value();
|
|
(void)b;
|
|
|
|
uint8_t flip = 0;
|
|
uint16_t checker = 4000;
|
|
for (;;) {
|
|
|
|
WDT_HIT();
|
|
|
|
// ever 3 * 4000, check if we got any data from client
|
|
// takes long time, usually messes with simualtion
|
|
if (flip == 3) {
|
|
if (data_available()) {
|
|
return false;
|
|
}
|
|
|
|
flip = 0;
|
|
}
|
|
|
|
// button press, takes a bit time, might mess with simualtion
|
|
if (checker-- == 0) {
|
|
if (BUTTON_PRESS()) {
|
|
return false;
|
|
}
|
|
|
|
flip++;
|
|
checker = 4000;
|
|
}
|
|
|
|
if (FPGA_SSC_RX_Ready()) {
|
|
b = (uint8_t)FPGA_SSC_RX_Value();
|
|
if (MillerDecoding(b, 0)) {
|
|
*len = Uart.len;
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool prepare_tag_modulation(tag_response_info_t *response_info, size_t max_buffer_size) {
|
|
// Example response, answer to MIFARE Classic read block will be 16 bytes + 2 CRC = 18 bytes
|
|
// This will need the following byte array for a modulation sequence
|
|
// 144 data bits (18 * 8)
|
|
// 18 parity bits
|
|
// 2 Start and stop
|
|
// 1 Correction bit (Answer in 1172 or 1236 periods, see FPGA)
|
|
// 1 just for the case
|
|
// ----------- +
|
|
// 166 bytes, since every bit that needs to be send costs us a byte
|
|
//
|
|
// Prepare the tag modulation bits from the message
|
|
CodeIso14443aAsTag(response_info->response, response_info->response_n);
|
|
|
|
tosend_t *ts = get_tosend();
|
|
|
|
// Check that encoding produced valid output
|
|
if (ts->max <= 0) {
|
|
Dbprintf("ToSend buffer empty after modulation (frame rejected or too large)");
|
|
return false;
|
|
}
|
|
|
|
// Make sure we do not exceed the free buffer space
|
|
if (ts->max > max_buffer_size) {
|
|
Dbprintf("ToSend buffer, Out-of-bound, when modulating bits for tag answer:");
|
|
Dbhexdump(response_info->response_n, response_info->response, false);
|
|
Dbprintf("Need %i, got %i", ts->max, max_buffer_size);
|
|
return false;
|
|
}
|
|
|
|
// Copy the byte array, used for this modulation to the buffer position
|
|
memcpy(response_info->modulation, ts->buf, ts->max);
|
|
|
|
// Store the number of bytes that were used for encoding/modulation and the time needed to transfer them
|
|
response_info->modulation_n = ts->max;
|
|
response_info->ProxToAirDuration = LastProxToAirDuration;
|
|
return true;
|
|
}
|
|
|
|
bool prepare_allocated_tag_modulation(tag_response_info_t *response_info, uint8_t **buffer, size_t *max_buffer_size) {
|
|
|
|
tosend_t *ts = get_tosend();
|
|
|
|
// Retrieve and store the current buffer index
|
|
response_info->modulation = *buffer;
|
|
|
|
// Forward the prepare tag modulation function to the inner function
|
|
if (prepare_tag_modulation(response_info, *max_buffer_size)) {
|
|
// Update the free buffer offset and the remaining buffer size
|
|
*buffer += ts->max;
|
|
*max_buffer_size -= ts->max;
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void Simulate_read_ulc_key(uint8_t *ulc_key) {
|
|
// copy UL-C key from emulator memory
|
|
|
|
if (ulc_key == NULL) {
|
|
return;
|
|
}
|
|
const mfu_dump_t *mfu_header = (const mfu_dump_t *) BigBuf_get_EM_addr();
|
|
memcpy(ulc_key, mfu_header->data + (0x2D * 4), 4);
|
|
memcpy(ulc_key + 4, mfu_header->data + (0x2C * 4), 4);
|
|
memcpy(ulc_key + 8, mfu_header->data + (0x2F * 4), 4);
|
|
memcpy(ulc_key + 12, mfu_header->data + (0x2E * 4), 4);
|
|
|
|
reverse_array(ulc_key, 4);
|
|
reverse_array(ulc_key + 4, 4);
|
|
reverse_array(ulc_key + 8, 4);
|
|
reverse_array(ulc_key + 12, 4);
|
|
}
|
|
|
|
static void Simulate_read_ulaes_key0(uint8_t *ulaes_key0) {
|
|
// copy UL-AES DataProtKey from emulator memory
|
|
|
|
if (ulaes_key0 == NULL) {
|
|
return;
|
|
}
|
|
const mfu_dump_t *mfu_header = (const mfu_dump_t *) BigBuf_get_EM_addr();
|
|
memcpy(ulaes_key0, mfu_header->data + (0x33 * 4), 4);
|
|
memcpy(ulaes_key0 + 4, mfu_header->data + (0x32 * 4), 4);
|
|
memcpy(ulaes_key0 + 8, mfu_header->data + (0x31 * 4), 4);
|
|
memcpy(ulaes_key0 + 12, mfu_header->data + (0x30 * 4), 4);
|
|
|
|
reverse_array(ulaes_key0, 4);
|
|
reverse_array(ulaes_key0 + 4, 4);
|
|
reverse_array(ulaes_key0 + 8, 4);
|
|
reverse_array(ulaes_key0 + 12, 4);
|
|
}
|
|
|
|
void iso14a_set_atqa_sak_override(uint16_t atqa, uint8_t sak) {
|
|
s_atqa_override = atqa;
|
|
s_sak_override = sak;
|
|
}
|
|
|
|
uint8_t iso14a_get_pcb_blocknum(void) {
|
|
return iso14_pcb_blocknum;
|
|
}
|
|
|
|
void iso14a_toggle_pcb_blocknum(void) {
|
|
iso14_pcb_blocknum ^= 1;
|
|
}
|
|
|
|
bool SimulateIso14443aInit(uint8_t tagType, uint16_t flags, uint8_t *data,
|
|
uint8_t *ats, size_t ats_len,
|
|
tag_response_info_t **responses,
|
|
uint32_t *cuid, uint8_t *pages, uint8_t *ulc_key) {
|
|
uint8_t sak = 0;
|
|
// The first response contains the ATQA (note: bytes are transmitted in reverse order).
|
|
static uint8_t rATQA[2] = { 0x00 };
|
|
// The second response contains the (mandatory) first 24 bits of the UID
|
|
static uint8_t rUIDc1[5] = { 0x00 };
|
|
// For UID size 7,
|
|
static uint8_t rUIDc2[5] = { 0x00 };
|
|
// For UID size 10,
|
|
static uint8_t rUIDc3[5] = { 0x00 };
|
|
// Prepare the mandatory SAK (for 4, 7 and 10 byte UID)
|
|
static uint8_t rSAKc1[3] = { 0x00 };
|
|
// Prepare the optional second SAK (for 7 and 10 byte UID), drop the cascade bit for 7b
|
|
static uint8_t rSAKc2[3] = { 0x00 };
|
|
// Prepare the optional third SAK (for 10 byte UID), drop the cascade bit
|
|
static uint8_t rSAKc3[3] = { 0x00 };
|
|
// dummy ATS (pseudo-ATR), answer to RATS
|
|
// Format byte = 0x58: FSCI=0x08 (FSC=256), TA(1) and TC(1) present,
|
|
// TA(1) = 0x80: different divisors not supported, DR = 1, DS = 1
|
|
// TB(1) = not present. Defaults: FWI = 4 (FWT = 256 * 16 * 2^4 * 1/fc = 4833us), SFGI = 0 (SFG = 256 * 16 * 2^0 * 1/fc = 302us)
|
|
// TC(1) = 0x02: CID supported, NAD not supported
|
|
// static uint8_t rATS[] = { 0x04, 0x58, 0x80, 0x02, 0x00, 0x00 };
|
|
static uint8_t rATS[40] = { 0x06, 0x75, 0x80, 0x60, 0x02, 0x00, 0x00, 0x00 };
|
|
uint8_t rATS_len = 8;
|
|
|
|
// GET_VERSION response for EV1/NTAG
|
|
static uint8_t rVERSION[10] = { 0x00 };
|
|
// READ_SIG response for EV1/NTAG
|
|
static uint8_t rSIGN[34] = { 0x00 };
|
|
// PPS response
|
|
static uint8_t rPPS[3] = { 0xD0 };
|
|
|
|
static uint8_t rPACK[4] = { 0x00, 0x00, 0x00, 0x00 };
|
|
|
|
switch (tagType) {
|
|
case 1: { // MIFARE Classic 1k
|
|
rATQA[0] = 0x04;
|
|
sak = 0x08;
|
|
break;
|
|
}
|
|
case 2: { // MIFARE Ultralight
|
|
rATQA[0] = 0x44;
|
|
sak = 0x00;
|
|
// some first pages of UL/NTAG dump is special data
|
|
mfu_dump_t *mfu_header = (mfu_dump_t *) BigBuf_get_EM_addr();
|
|
*pages = MAX(mfu_header->pages, 15);
|
|
|
|
// tearing flags
|
|
// for old dumps with all zero headers, we need to set default values.
|
|
for (uint8_t i = 0; i < 3; i++) {
|
|
if (mfu_header->counter_tearing[i][3] == 0x00) {
|
|
mfu_header->counter_tearing[i][3] = 0xBD;
|
|
}
|
|
}
|
|
|
|
// GET_VERSION
|
|
if (memcmp(mfu_header->version, "\x00\x00\x00\x00\x00\x00\x00\x00", 8) == 0) {
|
|
memcpy(rVERSION, "\x00\x04\x04\x02\x01\x00\x11\x03", 8);
|
|
} else {
|
|
memcpy(rVERSION, mfu_header->version, 8);
|
|
}
|
|
AddCrc14A(rVERSION, sizeof(rVERSION) - 2);
|
|
|
|
// READ_SIG
|
|
memcpy(rSIGN, mfu_header->signature, 32);
|
|
AddCrc14A(rSIGN, sizeof(rSIGN) - 2);
|
|
break;
|
|
}
|
|
case 3: { // MIFARE DESFire
|
|
rATQA[0] = 0x44;
|
|
rATQA[1] = 0x03;
|
|
sak = 0x20;
|
|
memcpy(rATS, "\x06\x75\x77\x81\x02\x80\x00\x00", 8);
|
|
rATS_len = 8; // including CRC
|
|
break;
|
|
}
|
|
case 4: { // ISO/IEC 14443-4 - javacard (JCOP)
|
|
rATQA[0] = 0x04;
|
|
sak = 0x28;
|
|
break;
|
|
}
|
|
case 5: { // MIFARE TNP3XXX
|
|
rATQA[0] = 0x01;
|
|
rATQA[1] = 0x0f;
|
|
sak = 0x01;
|
|
break;
|
|
}
|
|
case 6: { // MIFARE Mini 320b
|
|
rATQA[0] = 0x44;
|
|
sak = 0x09;
|
|
break;
|
|
}
|
|
case 7: { // NTAG 215
|
|
rATQA[0] = 0x44;
|
|
sak = 0x00;
|
|
// some first pages of UL/NTAG dump is special data
|
|
mfu_dump_t *mfu_header = (mfu_dump_t *) BigBuf_get_EM_addr();
|
|
*pages = MAX(mfu_header->pages, 19);
|
|
|
|
// tearing flags
|
|
// for old dumps with all zero headers, we need to set default values.
|
|
for (uint8_t i = 0; i < 3; i++) {
|
|
if (mfu_header->counter_tearing[i][3] == 0x00) {
|
|
mfu_header->counter_tearing[i][3] = 0xBD;
|
|
}
|
|
}
|
|
|
|
// GET_VERSION
|
|
if (memcmp(mfu_header->version, "\x00\x00\x00\x00\x00\x00\x00\x00", 8) == 0) {
|
|
memcpy(rVERSION, "\x00\x04\x04\x02\x01\x00\x11\x03", 8);
|
|
} else {
|
|
memcpy(rVERSION, mfu_header->version, 8);
|
|
}
|
|
AddCrc14A(rVERSION, sizeof(rVERSION) - 2);
|
|
|
|
// READ_SIG
|
|
memcpy(rSIGN, mfu_header->signature, 32);
|
|
AddCrc14A(rSIGN, sizeof(rSIGN) - 2);
|
|
break;
|
|
}
|
|
case 8: { // MIFARE Classic 4k
|
|
rATQA[0] = 0x02;
|
|
sak = 0x18;
|
|
break;
|
|
}
|
|
case 9: { // FM11RF005SH (Shanghai Metro)
|
|
rATQA[0] = 0x03;
|
|
rATQA[1] = 0x00;
|
|
sak = 0x0A;
|
|
break;
|
|
}
|
|
case 10: { // ST25TA IKEA Rothult
|
|
rATQA[0] = 0x42;
|
|
rATQA[1] = 0x00;
|
|
sak = 0x20;
|
|
break;
|
|
}
|
|
case 11: { // ISO/IEC 14443-4 - javacard (JCOP) / EMV
|
|
|
|
memcpy(rATS, "\x13\x78\x80\x72\x02\x80\x31\x80\x66\xb1\x84\x0c\x01\x6e\x01\x83\x00\x90\x00\x00\x00", 21);
|
|
rATS_len = 21; // including CRC
|
|
rATQA[0] = 0x04;
|
|
sak = 0x20;
|
|
break;
|
|
}
|
|
case 12: { // HID Seos 4K card
|
|
rATQA[0] = 0x01;
|
|
rATS[1] = 0x78; // FSC=256 required
|
|
sak = 0x20;
|
|
break;
|
|
}
|
|
case 13: { // MIFARE Ultralight C
|
|
|
|
rATQA[0] = 0x44;
|
|
sak = 0x00;
|
|
|
|
// some first pages of UL/NTAG dump is special data
|
|
mfu_dump_t *mfu_header = (mfu_dump_t *) BigBuf_get_EM_addr();
|
|
*pages = MAX(mfu_header->pages, 47);
|
|
|
|
Simulate_read_ulc_key(ulc_key);
|
|
|
|
/*
|
|
Dbprintf("UL-C Pages....... %u ( 47 )", *pages);
|
|
DbpString("UL-C 3des key... ");
|
|
Dbhexdump(16, ulc_key, false);
|
|
*/
|
|
|
|
if (IS_FLAG_UID_IN_DATA(flags, 7)) {
|
|
DbpString("UL-C UID........ ");
|
|
Dbhexdump(7, data, false);
|
|
}
|
|
break;
|
|
}
|
|
case 14: { // MIFARE Ultralight AES
|
|
|
|
rATQA[0] = 0x44;
|
|
sak = 0x00;
|
|
|
|
// some first pages of UL/NTAG dump is special data
|
|
mfu_dump_t *mfu_header = (mfu_dump_t *) BigBuf_get_EM_addr();
|
|
*pages = MAX(mfu_header->pages, 47);
|
|
|
|
// GET_VERSION
|
|
if (memcmp(mfu_header->version, "\x00\x00\x00\x00\x00\x00\x00\x00", 8) == 0) {
|
|
memcpy(rVERSION, "\x00\x04\x03\x01\x04\x00\x0F\x03", 8);
|
|
} else {
|
|
memcpy(rVERSION, mfu_header->version, 8);
|
|
}
|
|
AddCrc14A(rVERSION, sizeof(rVERSION) - 2);
|
|
|
|
// READ_SIG
|
|
memcpy(rSIGN, mfu_header->signature, 32);
|
|
AddCrc14A(rSIGN, sizeof(rSIGN) - 2);
|
|
|
|
Simulate_read_ulaes_key0(ulc_key);
|
|
|
|
/*
|
|
Dbprintf("UL-AES Pages....... %u ( 47 )", *pages);
|
|
DbpString("UL-AES key0... ");
|
|
Dbhexdump(16, ulc_key, false);
|
|
*/
|
|
|
|
if (IS_FLAG_UID_IN_DATA(flags, 7)) {
|
|
DbpString("UL-AES UID........ ");
|
|
Dbhexdump(7, data, false);
|
|
}
|
|
break;
|
|
}
|
|
case 15: { // MIFARE Plus
|
|
rATQA[0] = 0x44;
|
|
sak = 0x20;
|
|
break;
|
|
}
|
|
default: {
|
|
if (g_dbglevel >= DBG_ERROR) Dbprintf("Error: unknown tagtype (%d)", tagType);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
// copy the ats if supplied.
|
|
// ats is a pointer to 20 byte array
|
|
// rATS is a 40 byte array
|
|
if ((flags & FLAG_ATS_IN_DATA) == FLAG_ATS_IN_DATA) {
|
|
// Even if RATS protocol defined as max 40 bytes doesn't mean people try stuff. Check for overflow before copy
|
|
if (ats_len + 2 > sizeof(rATS)) {
|
|
if (g_dbglevel >= DBG_ERROR) Dbprintf("[-] ERROR: ATS overflow. Max %zu, got %zu", sizeof(rATS) - 2, ats_len);
|
|
return false;
|
|
}
|
|
memcpy(rATS, ats, ats_len);
|
|
rATS_len = ats_len + 2;
|
|
// ATS length (without CRC) is supposed to match its first byte TL
|
|
if (ats_len != ats[0]) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("[-] WARNING: actual ATS length (%zu) differs from its TL value (%u).", ats_len, ats[0]);
|
|
}
|
|
}
|
|
|
|
// Apply SAK override before it is encoded into rSAKc1/2/3.
|
|
if ((flags & FLAG_SAK_IN_DATA) == FLAG_SAK_IN_DATA) {
|
|
sak = s_sak_override;
|
|
}
|
|
|
|
// if uid not supplied then get from emulator memory
|
|
if ((memcmp(data, "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 10) == 0) || IS_FLAG_UID_IN_EMUL(flags)) {
|
|
if (tagType == 2 || tagType == 7 || tagType == 13 || tagType == 14) {
|
|
uint16_t start = MFU_DUMP_PREFIX_LENGTH;
|
|
uint8_t emdata[8];
|
|
emlGet(emdata, start, sizeof(emdata));
|
|
memcpy(data, emdata, 3); // uid bytes 0-2
|
|
memcpy(data + 3, emdata + 4, 4); // uid bytes 3-7
|
|
FLAG_SET_UID_IN_DATA(flags, 7);
|
|
} else {
|
|
emlGet(data, 0, 4);
|
|
FLAG_SET_UID_IN_DATA(flags, 4);
|
|
}
|
|
}
|
|
|
|
if (IS_FLAG_UID_IN_DATA(flags, 4)) {
|
|
rUIDc1[0] = data[0];
|
|
rUIDc1[1] = data[1];
|
|
rUIDc1[2] = data[2];
|
|
rUIDc1[3] = data[3];
|
|
rUIDc1[4] = rUIDc1[0] ^ rUIDc1[1] ^ rUIDc1[2] ^ rUIDc1[3];
|
|
|
|
// Configure the ATQA and SAK accordingly
|
|
rATQA[0] &= 0xBF;
|
|
|
|
if (tagType == 11) {
|
|
rSAKc1[0] = sak & 0xFC & 0X70;
|
|
} else {
|
|
rSAKc1[0] = sak & 0xFB;
|
|
}
|
|
|
|
AddCrc14A(rSAKc1, sizeof(rSAKc1) - 2);
|
|
|
|
*cuid = bytes_to_num(data, 4);
|
|
} else if (IS_FLAG_UID_IN_DATA(flags, 7)) {
|
|
rUIDc1[0] = MIFARE_SELECT_CT; // Cascade Tag marker
|
|
rUIDc1[1] = data[0];
|
|
rUIDc1[2] = data[1];
|
|
rUIDc1[3] = data[2];
|
|
rUIDc1[4] = rUIDc1[0] ^ rUIDc1[1] ^ rUIDc1[2] ^ rUIDc1[3];
|
|
|
|
rUIDc2[0] = data[3];
|
|
rUIDc2[1] = data[4];
|
|
rUIDc2[2] = data[5];
|
|
rUIDc2[3] = data[6];
|
|
rUIDc2[4] = rUIDc2[0] ^ rUIDc2[1] ^ rUIDc2[2] ^ rUIDc2[3];
|
|
|
|
// Configure the ATQA and SAK accordingly
|
|
rATQA[0] &= 0xBF;
|
|
rATQA[0] |= 0x40;
|
|
rSAKc1[0] = 0x04;
|
|
rSAKc2[0] = sak & 0xFB;
|
|
AddCrc14A(rSAKc1, sizeof(rSAKc1) - 2);
|
|
AddCrc14A(rSAKc2, sizeof(rSAKc2) - 2);
|
|
|
|
*cuid = bytes_to_num(data + 3, 4);
|
|
|
|
} else if (IS_FLAG_UID_IN_DATA(flags, 10)) {
|
|
|
|
rUIDc1[0] = MIFARE_SELECT_CT; // Cascade Tag marker
|
|
rUIDc1[1] = data[0];
|
|
rUIDc1[2] = data[1];
|
|
rUIDc1[3] = data[2];
|
|
rUIDc1[4] = rUIDc1[0] ^ rUIDc1[1] ^ rUIDc1[2] ^ rUIDc1[3];
|
|
|
|
rUIDc2[0] = MIFARE_SELECT_CT; // Cascade Tag marker
|
|
rUIDc2[1] = data[3];
|
|
rUIDc2[2] = data[4];
|
|
rUIDc2[3] = data[5];
|
|
rUIDc2[4] = rUIDc2[0] ^ rUIDc2[1] ^ rUIDc2[2] ^ rUIDc2[3];
|
|
|
|
rUIDc3[0] = data[6];
|
|
rUIDc3[1] = data[7];
|
|
rUIDc3[2] = data[8];
|
|
rUIDc3[3] = data[9];
|
|
rUIDc3[4] = rUIDc3[0] ^ rUIDc3[1] ^ rUIDc3[2] ^ rUIDc3[3];
|
|
|
|
// Configure the ATQA and SAK accordingly
|
|
rATQA[0] &= 0xBF;
|
|
rATQA[0] |= 0x80;
|
|
rSAKc1[0] = 0x04;
|
|
rSAKc2[0] = 0x04;
|
|
rSAKc3[0] = sak & 0xFB;
|
|
AddCrc14A(rSAKc1, sizeof(rSAKc1) - 2);
|
|
AddCrc14A(rSAKc2, sizeof(rSAKc2) - 2);
|
|
AddCrc14A(rSAKc3, sizeof(rSAKc3) - 2);
|
|
|
|
*cuid = bytes_to_num(data + 3 + 3, 4);
|
|
} else {
|
|
if (g_dbglevel >= DBG_ERROR) Dbprintf("[-] ERROR: UID size not defined");
|
|
return false;
|
|
}
|
|
|
|
// Apply ATQA override after all UID-size bits have been set.
|
|
if ((flags & FLAG_ATQA_IN_DATA) == FLAG_ATQA_IN_DATA) {
|
|
rATQA[0] = (uint8_t)(s_atqa_override >> 8);
|
|
rATQA[1] = (uint8_t)(s_atqa_override & 0xFF);
|
|
}
|
|
|
|
AddCrc14A(rATS, rATS_len - 2);
|
|
|
|
AddCrc14A(rPPS, sizeof(rPPS) - 2);
|
|
|
|
// EV1/NTAG Amiibo: if no PWD is set, populate emulator memory with the UID-derived
|
|
// password and its PACK (0x8080) at the PWD/PACK pages, so the sim serves them from
|
|
// emulator memory like any other value. Auth and PACK are then read straight from
|
|
// memory, keeping eset/eview authoritative (what you set is what the sim serves).
|
|
if (tagType == 7) {
|
|
uint8_t pwd[4] = {0, 0, 0, 0};
|
|
emlGet(pwd, (*pages - 1) * 4 + MFU_DUMP_PREFIX_LENGTH, sizeof(pwd));
|
|
if (memcmp(pwd, "\x00\x00\x00\x00", 4) == 0) {
|
|
uint8_t amiibo_pwd[4] = {0, 0, 0, 0};
|
|
Uint4byteToMemLe(amiibo_pwd, ul_ev1_pwdgenB(data));
|
|
emlSet(amiibo_pwd, (*pages - 1) * 4 + MFU_DUMP_PREFIX_LENGTH, sizeof(amiibo_pwd));
|
|
uint8_t amiibo_pack[4] = {0x80, 0x80, 0x00, 0x00};
|
|
emlSet(amiibo_pack, (*pages) * 4 + MFU_DUMP_PREFIX_LENGTH, sizeof(amiibo_pack));
|
|
}
|
|
emlGet(rPACK, (*pages) * 4 + MFU_DUMP_PREFIX_LENGTH, sizeof(rPACK));
|
|
}
|
|
|
|
AddCrc14A(rPACK, sizeof(rPACK) - 2);
|
|
|
|
static tag_response_info_t responses_init[] = {
|
|
{ .response = rATQA, .response_n = sizeof(rATQA) }, // Answer to request - respond with card type
|
|
{ .response = rUIDc1, .response_n = sizeof(rUIDc1) }, // Anticollision cascade1 - respond with uid
|
|
{ .response = rUIDc2, .response_n = sizeof(rUIDc2) }, // Anticollision cascade2 - respond with 2nd half of uid if asked
|
|
{ .response = rUIDc3, .response_n = sizeof(rUIDc3) }, // Anticollision cascade3 - respond with 3rd half of uid if asked
|
|
{ .response = rSAKc1, .response_n = sizeof(rSAKc1) }, // Acknowledge select - cascade 1
|
|
{ .response = rSAKc2, .response_n = sizeof(rSAKc2) }, // Acknowledge select - cascade 2
|
|
{ .response = rSAKc3, .response_n = sizeof(rSAKc3) }, // Acknowledge select - cascade 3
|
|
{ .response = rATS, .response_n = sizeof(rATS) }, // dummy ATS (pseudo-ATR), answer to RATS
|
|
{ .response = rVERSION, .response_n = sizeof(rVERSION) }, // EV1/NTAG GET_VERSION response
|
|
{ .response = rSIGN, .response_n = sizeof(rSIGN) }, // EV1/NTAG READ_SIG response
|
|
{ .response = rPPS, .response_n = sizeof(rPPS) }, // PPS response
|
|
{ .response = rPACK, .response_n = sizeof(rPACK) } // PACK response
|
|
};
|
|
|
|
// since rats len is variable now.
|
|
responses_init[RESP_INDEX_ATS].response_n = rATS_len;
|
|
|
|
// "precompiled" responses.
|
|
// These exist for speed reasons. There are no time in the anti collision phase to calculate responses.
|
|
// There are 12 predefined responses with a total of 84 bytes data to transmit.
|
|
//
|
|
// Coded responses need one byte per bit to transfer (data, parity, start, stop, correction)
|
|
// 85 * 8 data bits, 85 * 1 parity bits, 12 start bits, 12 stop bits, 12 correction bits
|
|
// 85 * 8 + 85 + 12 + 12 + 12 == 801
|
|
// CHG:
|
|
// 85 bytes normally (rats = 8 bytes)
|
|
// 77 bytes + ratslen,
|
|
|
|
#define ALLOCATED_TAG_MODULATION_BUFFER_SIZE ( ((77 + rATS_len) * 8) + 77 + rATS_len + 12 + 12 + 12)
|
|
|
|
uint8_t *free_buffer = BigBuf_calloc(ALLOCATED_TAG_MODULATION_BUFFER_SIZE);
|
|
if (free_buffer == NULL) {
|
|
BigBuf_free_keep_EM();
|
|
if (g_dbglevel >= DBG_ERROR) DbpString("Failed to allocate modulation buffer");
|
|
return false;
|
|
}
|
|
|
|
// modulation buffer pointer and current buffer free space size
|
|
uint8_t *free_buffer_pointer = free_buffer;
|
|
size_t free_buffer_size = ALLOCATED_TAG_MODULATION_BUFFER_SIZE;
|
|
|
|
// Prepare the responses of the anticollision phase
|
|
// there will be not enough time to do this at the moment the reader sends it REQA
|
|
for (size_t i = 0; i < ARRAYLEN(responses_init); i++) {
|
|
if (prepare_allocated_tag_modulation(&responses_init[i], &free_buffer_pointer, &free_buffer_size) == false) {
|
|
BigBuf_free_keep_EM();
|
|
if (g_dbglevel >= DBG_ERROR) Dbprintf("Not enough modulation buffer size, exit after %d elements", i);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
*responses = responses_init;
|
|
return true;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Main loop of simulated tag: receive commands from reader, decide what
|
|
// response to send, and send it.
|
|
// 'hf 14a sim'
|
|
//-----------------------------------------------------------------------------
|
|
void SimulateIso14443aTag(uint8_t tagType, uint16_t flags, uint8_t *useruid, uint8_t exitAfterNReads) {
|
|
SimulateIso14443aTagEx(tagType, flags, useruid, exitAfterNReads, NULL, 0, NULL, 0, NULL, 0, false);
|
|
}
|
|
|
|
void SimulateIso14443aTagEx(uint8_t tagType, uint16_t flags, uint8_t *useruid, uint8_t exitAfterNReads,
|
|
uint8_t *ats, size_t ats_len,
|
|
uint8_t *ulauth_1a1, uint8_t ulauth_1a1_len,
|
|
uint8_t *ulauth_1a2, uint8_t ulauth_1a2_len,
|
|
bool ulauth_1a2_mirror) {
|
|
#define ATTACK_KEY_COUNT 16
|
|
#define ULC_TAG_NONCE "\x01\x02\x03\x04\x05\x06\x07\x08"
|
|
|
|
tag_response_info_t *responses;
|
|
uint32_t cuid = 0;
|
|
uint32_t nonce = 0;
|
|
/// Ultralight-C 3des2k
|
|
uint8_t ulc_key[16] = { 0x00 }; // also for UL-AES
|
|
uint8_t ulc_iv[16] = { 0x00 }; // also for UL-AES
|
|
bool ulc_reread_key = false;
|
|
bool ulaes_reread_key = false;
|
|
uint8_t pages = 0;
|
|
|
|
// Here, we collect CUID, block1, keytype1, NT1, NR1, AR1, CUID, block2, keytyp2, NT2, NR2, AR2
|
|
// it should also collect block, keytype.
|
|
uint8_t cardAUTHSC = 0;
|
|
uint8_t cardAUTHKEY = 0xff; // no authentication
|
|
// allow collecting up to 8 sets of nonces to allow recovery of up to 8 keys
|
|
|
|
nonces_t ar_nr_nonces[ATTACK_KEY_COUNT]; // for attack types moebius
|
|
memset(ar_nr_nonces, 0x00, sizeof(ar_nr_nonces));
|
|
uint8_t moebius_count = 0;
|
|
|
|
// command buffers
|
|
uint8_t receivedCmd[MAX_FRAME_SIZE] = { 0x00 };
|
|
uint8_t receivedCmdPar[MAX_PARITY_SIZE] = { 0x00 };
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Note: we call FpgaDownloadAndGo_keep_EM(FPGA_BITSTREAM_HF) here although the
|
|
// FPGA isn't needed yet. iso14443a_setup() below does it otherwise, and a
|
|
// bitstream download frees and clears BigBuf - which by then holds the
|
|
// Emulator Memory and the precompiled anticollision responses.
|
|
//-----------------------------------------------------------------------------
|
|
FpgaDownloadAndGo_keep_EM(FPGA_BITSTREAM_HF);
|
|
|
|
// free eventually allocated BigBuf memory but keep Emulator Memory
|
|
BigBuf_free_keep_EM();
|
|
|
|
// clear trace before allocating. The response buffers come out of the same
|
|
// pool and BigBuf_malloc() won't hand out memory the trace still occupies.
|
|
clear_trace();
|
|
|
|
// Buffers for the dynamic response, created when the reader queries for it.
|
|
// Such a response is less time critical, so we can prepare them on the fly
|
|
#define DYNAMIC_RESPONSE_BUFFER_SIZE 64
|
|
|
|
uint16_t dynamic_response_buffer_size = DYNAMIC_RESPONSE_BUFFER_SIZE;
|
|
if (tagType == 10) {
|
|
dynamic_response_buffer_size = ST25TA_EML_NDEF_MAX + 4;
|
|
}
|
|
|
|
// prepare_tag_modulation() memcpy's the encoded answer out of the ToSend
|
|
// buffer, and tosend_stuffbit() hard caps that at TOSEND_BUFFER_SIZE, so the
|
|
// modulation can never be larger than that however big the response is.
|
|
// Encoding costs 9 bytes per response byte -- 8 data bits plus a parity bit --
|
|
// and 4 more for start, stop and the correction bit.
|
|
//
|
|
// ST25TA used to ask for a flat 4096 here, 1788 bytes more than ToSend can
|
|
// ever hand it, which made it the largest single allocation of any tag
|
|
// simulation. The 512 the other tag types got was 68 bytes short of what a
|
|
// full 64 byte dynamic response needs, so those were refused at modulation
|
|
// time with an out-of-bound message
|
|
uint16_t dynamic_modulation_buffer_size = MIN((9 * dynamic_response_buffer_size) + 4, TOSEND_BUFFER_SIZE);
|
|
|
|
uint8_t *dynamic_response_buffer = BigBuf_calloc(dynamic_response_buffer_size);
|
|
if (dynamic_response_buffer == NULL) {
|
|
BigBuf_free_keep_EM();
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EMALLOC, NULL, 0);
|
|
return;
|
|
}
|
|
uint8_t *dynamic_modulation_buffer = BigBuf_calloc(dynamic_modulation_buffer_size);
|
|
if (dynamic_modulation_buffer == NULL) {
|
|
BigBuf_free_keep_EM();
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EMALLOC, NULL, 0);
|
|
return;
|
|
}
|
|
tag_response_info_t dynamic_response_info = {
|
|
.response = dynamic_response_buffer,
|
|
.response_n = 0,
|
|
.modulation = dynamic_modulation_buffer,
|
|
.modulation_n = 0
|
|
};
|
|
|
|
if (SimulateIso14443aInit(tagType, flags, useruid, ats, ats_len,
|
|
&responses, &cuid, &pages,
|
|
ulc_key) == false) {
|
|
BigBuf_free_keep_EM();
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EINIT, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
uint8_t st25ta_ndef[ST25TA_EML_NDEF_MAX] = {0};
|
|
uint16_t st25ta_ndef_len = 0;
|
|
if (tagType == 10) {
|
|
uint8_t st25ta_header[ST25TA_EML_DATA_OFFSET] = {0};
|
|
emlGet(st25ta_header, 0, sizeof(st25ta_header));
|
|
if (memcmp(st25ta_header + ST25TA_EML_MAGIC_OFFSET, ST25TA_EML_MAGIC, 4) == 0) {
|
|
st25ta_ndef_len = st25ta_header[ST25TA_EML_LEN_OFFSET] |
|
|
(st25ta_header[ST25TA_EML_LEN_OFFSET + 1] << 8);
|
|
if (st25ta_ndef_len <= ST25TA_EML_NDEF_MAX) {
|
|
emlGet(st25ta_ndef, ST25TA_EML_DATA_OFFSET, st25ta_ndef_len);
|
|
} else {
|
|
st25ta_ndef_len = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
mfu_dump_t *mfu_em_dump = NULL;
|
|
if (tagType == 2 || tagType == 7) {
|
|
mfu_em_dump = (mfu_dump_t *)BigBuf_get_EM_addr();
|
|
if (!mfu_em_dump) {
|
|
if (g_dbglevel >= DBG_ERROR) Dbprintf("[-] ERROR: Failed to get EM address for MFU/NTAG operations.");
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EMALLOC, NULL, 0);
|
|
return;
|
|
}
|
|
}
|
|
|
|
// We need to listen to the high-frequency, peak-detected path.
|
|
iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
iso14a_set_timeout(201400); // 106 * 19ms default *100?
|
|
|
|
int len = 0;
|
|
|
|
// To control where we are in the protocol
|
|
#define ORDER_NONE 0
|
|
//#define ORDER_REQA 1
|
|
//#define ORDER_SELECT_ALL_CL1 2
|
|
//#define ORDER_SELECT_CL1 3
|
|
#define ORDER_HALTED 5
|
|
#define ORDER_WUPA 6
|
|
#define ORDER_AUTH 7
|
|
//#define ORDER_SELECT_ALL_CL2 20
|
|
//#define ORDER_SELECT_CL2 25
|
|
//#define ORDER_SELECT_ALL_CL3 30
|
|
//#define ORDER_SELECT_CL3 35
|
|
#define ORDER_EV1_COMP_WRITE 40
|
|
//#define ORDER_RATS 70
|
|
|
|
uint8_t order = ORDER_NONE;
|
|
int retval = PM3_SUCCESS;
|
|
|
|
// Just to allow some checks
|
|
// int happened = 0;
|
|
// int happened2 = 0;
|
|
int cmdsRecvd = 0;
|
|
uint32_t numReads = 0; //Counts numer of times reader reads a block
|
|
|
|
// compatible write block number
|
|
uint8_t wrblock = 0;
|
|
|
|
bool odd_reply = true;
|
|
|
|
set_tracing(true);
|
|
LED_A_ON();
|
|
|
|
// main loop
|
|
bool finished = false;
|
|
while (finished == false) {
|
|
// BUTTON_PRESS check done in GetIso14443aCommandFromReader
|
|
WDT_HIT();
|
|
|
|
tag_response_info_t *p_response = NULL;
|
|
|
|
// Clean receive command buffer
|
|
if (GetIso14443aCommandFromReader(receivedCmd, sizeof(receivedCmd), receivedCmdPar, &len) == false) {
|
|
Dbprintf("Emulator stopped. Trace length: %d ", BigBuf_get_traceLen());
|
|
retval = PM3_EOPABORTED;
|
|
break;
|
|
}
|
|
|
|
// we need to check "ordered" states before, because received data may be same to any command - is wrong!!!
|
|
if (order == ORDER_EV1_COMP_WRITE && len == 18) {
|
|
// MIFARE_ULC_COMP_WRITE part 2
|
|
// 16 bytes data + 2 bytes crc, only least significant 4 bytes are written
|
|
bool isCrcCorrect = CheckCrc14A(receivedCmd, len);
|
|
if (isCrcCorrect) {
|
|
// first blocks of emu are header
|
|
emlSetMem_xt(receivedCmd, wrblock + MFU_DUMP_PREFIX_LENGTH / 4, 1, 4);
|
|
// send ACK
|
|
EmSend4bit(CARD_ACK);
|
|
if (tagType == 13 && wrblock >= 0x2c && wrblock <= 0x2F) {
|
|
ulc_reread_key = true;
|
|
}
|
|
if (tagType == 14 && wrblock >= 0x30 && wrblock <= 0x37) {
|
|
ulaes_reread_key = true;
|
|
}
|
|
} else {
|
|
// send NACK 0x1 == crc/parity error
|
|
EmSend4bit(CARD_NACK_PA);
|
|
}
|
|
order = ORDER_NONE; // back to work state
|
|
p_response = NULL;
|
|
|
|
} else if (order == ORDER_AUTH && len == 8 && tagType != 2 && tagType != 7 && tagType != 13 && tagType != 14) {
|
|
// Received {nr] and {ar} (part of authentication)
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
uint32_t nr = bytes_to_num(receivedCmd, 4);
|
|
uint32_t ar = bytes_to_num(receivedCmd + 4, 4);
|
|
|
|
// Collect AR/NR per keytype & sector
|
|
if ((flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK) {
|
|
|
|
int8_t index = -1;
|
|
int8_t empty = -1;
|
|
for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) {
|
|
// find which index to use
|
|
if ((cardAUTHSC == ar_nr_nonces[i].sector) && (cardAUTHKEY == ar_nr_nonces[i].keytype))
|
|
index = i;
|
|
|
|
// keep track of empty slots.
|
|
if (ar_nr_nonces[i].state == EMPTY)
|
|
empty = i;
|
|
}
|
|
// if no empty slots. Choose first and overwrite.
|
|
if (index == -1) {
|
|
if (empty == -1) {
|
|
index = 0;
|
|
ar_nr_nonces[index].state = EMPTY;
|
|
} else {
|
|
index = empty;
|
|
}
|
|
}
|
|
|
|
switch ((nonce_state)ar_nr_nonces[index].state) {
|
|
case EMPTY: {
|
|
// first nonce collect
|
|
ar_nr_nonces[index].cuid = cuid;
|
|
ar_nr_nonces[index].sector = cardAUTHSC;
|
|
ar_nr_nonces[index].keytype = cardAUTHKEY;
|
|
ar_nr_nonces[index].nonce = nonce;
|
|
ar_nr_nonces[index].nr = nr;
|
|
ar_nr_nonces[index].ar = ar;
|
|
ar_nr_nonces[index].state = FIRST;
|
|
break;
|
|
}
|
|
case FIRST : {
|
|
// second nonce collect
|
|
ar_nr_nonces[index].nonce2 = nonce;
|
|
ar_nr_nonces[index].nr2 = nr;
|
|
ar_nr_nonces[index].ar2 = ar;
|
|
ar_nr_nonces[index].state = SECOND;
|
|
|
|
// send to client (one struct nonces_t)
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_SUCCESS, (uint8_t *)&ar_nr_nonces[index], sizeof(nonces_t));
|
|
|
|
ar_nr_nonces[index].state = EMPTY;
|
|
ar_nr_nonces[index].sector = 0;
|
|
ar_nr_nonces[index].keytype = 0;
|
|
|
|
moebius_count++;
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
order = ORDER_NONE; // back to work state
|
|
p_response = NULL;
|
|
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_REQA && len == 1) { // Received a REQUEST, but in HALTED, skip
|
|
odd_reply = !odd_reply;
|
|
if (odd_reply) {
|
|
p_response = &responses[RESP_INDEX_ATQA];
|
|
}
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_WUPA && len == 1) { // Received a WAKEUP
|
|
p_response = &responses[RESP_INDEX_ATQA];
|
|
} else if (receivedCmd[1] == 0x20 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && len == 2) { // Received request for UID (cascade 1)
|
|
p_response = &responses[RESP_INDEX_UIDC1];
|
|
} else if (receivedCmd[1] == 0x20 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && len == 2) { // Received request for UID (cascade 2)
|
|
p_response = &responses[RESP_INDEX_UIDC2];
|
|
} else if (receivedCmd[1] == 0x20 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && len == 2) { // Received request for UID (cascade 3)
|
|
p_response = &responses[RESP_INDEX_UIDC3];
|
|
} else if (receivedCmd[1] == 0x70 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && len == 9) { // Received a SELECT (cascade 1)
|
|
p_response = &responses[RESP_INDEX_SAKC1];
|
|
} else if (receivedCmd[1] == 0x70 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && len == 9) { // Received a SELECT (cascade 2)
|
|
p_response = &responses[RESP_INDEX_SAKC2];
|
|
} else if (receivedCmd[1] == 0x70 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && len == 9) { // Received a SELECT (cascade 3)
|
|
p_response = &responses[RESP_INDEX_SAKC3];
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_PPS) {
|
|
p_response = &responses[RESP_INDEX_PPS];
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_READBLOCK && len == 4) { // Received a (plain) READ
|
|
uint8_t block = receivedCmd[1];
|
|
// if Ultralight or NTAG (4 byte blocks)
|
|
if (tagType == 7 || tagType == 2 || tagType == 13 || tagType == 14) {
|
|
if (block > pages) {
|
|
// send NACK 0x0 == invalid argument
|
|
EmSend4bit(CARD_NACK_IV);
|
|
} else {
|
|
// TODO: check if block >= AUTH0 and AUTH1=0 and unauth on ULC/ULAES -> NACK
|
|
// first blocks of emu are header
|
|
uint16_t start = (block * 4) + MFU_DUMP_PREFIX_LENGTH;
|
|
uint8_t emdata[MIFARE_BLOCK_SIZE + CRC16_SIZE] = {0};
|
|
emlGet(emdata, start, MIFARE_BLOCK_SIZE);
|
|
// mask key pages if needed
|
|
if ((tagType == 13) && (block >= 0x29) && (block <= 0x2F)) {
|
|
uint8_t offset = block >= 0x2C ? 0 : 0x2C - block;
|
|
uint8_t length = block >= 0x2C ? 0x30 - block : block - 0x28;
|
|
memset(emdata + offset * 4, 0x00, length * 4);
|
|
} else if ((tagType == 14) && (block >= 0x2D) && (block <= 0x37)) {
|
|
uint8_t offset = block >= 0x30 ? 0 : 0x30 - block;
|
|
uint8_t length = block >= 0x30 ? (0x37 - block > 4 ? 4 : 0x37 - block) : block - 0x2C;
|
|
memset(emdata + offset * 4, 0x00, length * 4);
|
|
}
|
|
// TODO: implement cyclic memory if we reach AUTH0 and AUTH1=0 and unauth on ULC/ULAES, or if we reach end of memory
|
|
AddCrc14A(emdata, MIFARE_BLOCK_SIZE);
|
|
EmSendCmd(emdata, sizeof(emdata));
|
|
numReads++; // Increment number of times reader requested a block
|
|
|
|
if (exitAfterNReads > 0 && numReads == exitAfterNReads) {
|
|
Dbprintf("[MFUEMUL_WORK] " _YELLOW_("%u") " reads done, exiting", numReads);
|
|
finished = true;
|
|
}
|
|
}
|
|
// We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below
|
|
p_response = NULL;
|
|
} else if (tagType == 9 && block == 1) {
|
|
// FM11005SH. 16blocks, 4bytes / block.
|
|
// block0 = 2byte Customer ID (CID), 2byte Manufacture ID (MID)
|
|
// block1 = 4byte UID.
|
|
p_response = &responses[RESP_INDEX_UIDC1];
|
|
} else { // all other tags (16 byte block tags)
|
|
uint8_t emdata[MIFARE_BLOCK_SIZE + CRC16_SIZE] = {0};
|
|
emlGet(emdata, block, MIFARE_BLOCK_SIZE);
|
|
AddCrc14A(emdata, MIFARE_BLOCK_SIZE);
|
|
EmSendCmd(emdata, sizeof(emdata));
|
|
// We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below
|
|
p_response = NULL;
|
|
}
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_FASTREAD && len == 5) { // Received a FAST READ (ranged read)
|
|
uint8_t block1 = receivedCmd[1];
|
|
uint8_t block2 = receivedCmd[2];
|
|
if (block1 > pages) {
|
|
// send NACK 0x0 == invalid argument
|
|
EmSend4bit(CARD_NACK_IV);
|
|
} else {
|
|
uint8_t emdata[MAX_FRAME_SIZE] = {0};
|
|
// first blocks of emu are header
|
|
int start = block1 * 4 + MFU_DUMP_PREFIX_LENGTH;
|
|
len = (block2 - block1 + 1) * 4;
|
|
emlGet(emdata, start, len);
|
|
AddCrc14A(emdata, len);
|
|
EmSendCmd(emdata, len + 2);
|
|
}
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_ULC_WRITE && len == 8 && (tagType == 2 || tagType == 7 || tagType == 13 || tagType == 14)) { // Received a WRITE
|
|
|
|
p_response = NULL;
|
|
|
|
// cmd + block + 4 bytes data + 2 bytes crc
|
|
if (CheckCrc14A(receivedCmd, len)) {
|
|
|
|
uint8_t block = receivedCmd[1];
|
|
|
|
// sanity checks
|
|
if (block > pages) {
|
|
// send NACK 0x0, invalid argument
|
|
EmSend4bit(CARD_NACK_IV);
|
|
goto jump;
|
|
}
|
|
// TODO: check if block >= AUTH0 and unauth on ULC/ULAES -> NACK
|
|
|
|
// OTP sanity check
|
|
if (block == 0x03) {
|
|
|
|
uint8_t orig[4] = {0};
|
|
emlGet(orig, 12 + MFU_DUMP_PREFIX_LENGTH, 4);
|
|
|
|
bool risky = false;
|
|
for (int i = 0; i < 4; i++) {
|
|
risky |= (orig[i] & ~receivedCmd[2 + i]) != 0;
|
|
}
|
|
|
|
if (risky) {
|
|
EmSend4bit(CARD_NACK_IV);
|
|
goto jump;
|
|
}
|
|
}
|
|
|
|
// first blocks of emu are header
|
|
emlSetMem_xt(&receivedCmd[2], block + (MFU_DUMP_PREFIX_LENGTH / 4), 1, 4);
|
|
// send ACK
|
|
EmSend4bit(CARD_ACK);
|
|
|
|
if (tagType == 13 && block >= 0x2c && block <= 0x2F) {
|
|
ulc_reread_key = true;
|
|
}
|
|
if (tagType == 14 && block >= 0x30 && block <= 0x37) {
|
|
ulaes_reread_key = true;
|
|
}
|
|
} else {
|
|
// send NACK 0x1 == crc/parity error
|
|
EmSend4bit(CARD_NACK_PA);
|
|
}
|
|
goto jump;
|
|
} else if (receivedCmd[0] == MIFARE_ULC_COMP_WRITE && len == 4 && (tagType == 2 || tagType == 7 || tagType == 13 || tagType == 14)) {
|
|
// cmd + block + 2 bytes crc
|
|
if (CheckCrc14A(receivedCmd, len)) {
|
|
wrblock = receivedCmd[1];
|
|
if (wrblock > pages) {
|
|
// send NACK 0x0 == invalid argument
|
|
EmSend4bit(CARD_NACK_IV);
|
|
// TODO: check if wrblock >= AUTH0 and unauth on ULC/ULAES -> NACK
|
|
} else {
|
|
// send ACK
|
|
EmSend4bit(CARD_ACK);
|
|
// go to part 2
|
|
order = ORDER_EV1_COMP_WRITE;
|
|
}
|
|
} else {
|
|
// send NACK 0x1 == crc/parity error
|
|
EmSend4bit(CARD_NACK_PA);
|
|
}
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_READSIG && len == 4 && (tagType == 7 || tagType == 14)) { // Received a READ SIGNATURE --
|
|
p_response = &responses[RESP_INDEX_SIGNATURE];
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_READ_CNT && len == 4 && tagType == 7) { // Received a READ COUNTER --
|
|
uint8_t index = receivedCmd[1];
|
|
if (index > 2) {
|
|
// send NACK 0x0 == invalid argument
|
|
EmSend4bit(CARD_NACK_IV);
|
|
} else {
|
|
uint8_t cmd[] = {0, 0, 0, 0x14, 0xa5};
|
|
memcpy(cmd, mfu_em_dump->counter_tearing[index], 3);
|
|
AddCrc14A(cmd, sizeof(cmd) - 2);
|
|
EmSendCmd(cmd, sizeof(cmd));
|
|
}
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_INCR_CNT && len == 8 && tagType == 7) { // Received a INC COUNTER --
|
|
uint8_t index = receivedCmd[1];
|
|
if (index > 2) {
|
|
// send NACK 0x0 == invalid argument
|
|
EmSend4bit(CARD_NACK_IV);
|
|
} else {
|
|
uint32_t val = le24toh(mfu_em_dump->counter_tearing[index]); // get current counter value
|
|
val += le24toh(receivedCmd + 2); // increment in
|
|
|
|
// if new value + old value is bigger 24bits, fail
|
|
if (val > 0xFFFFFF) {
|
|
// send NACK 0x4 == counter overflow
|
|
EmSend4bit(CARD_NACK_NA);
|
|
} else {
|
|
htole24(val, mfu_em_dump->counter_tearing[index]);
|
|
|
|
// send ACK
|
|
EmSend4bit(CARD_ACK);
|
|
}
|
|
}
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_CHECKTEAR && len == 4 && tagType == 7) { // Received a CHECK_TEARING_EVENT --
|
|
// first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature]
|
|
uint8_t index = receivedCmd[1];
|
|
if (index > 2) {
|
|
// send NACK 0x0 == invalid argument
|
|
EmSend4bit(CARD_NACK_IV);
|
|
} else {
|
|
uint8_t cmd[3] = {0, 0, 0};
|
|
cmd[0] = mfu_em_dump->counter_tearing[index][3];
|
|
AddCrc14A(cmd, sizeof(cmd) - 2);
|
|
EmSendCmd(cmd, sizeof(cmd));
|
|
}
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_HALT && len == 4) { // Received a HALT
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
p_response = NULL;
|
|
order = ORDER_HALTED;
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_VERSION && len == 3 && (tagType == 2 || tagType == 7 || tagType == 14)) {
|
|
p_response = &responses[RESP_INDEX_VERSION];
|
|
} else if (receivedCmd[0] == MFDES_GET_VERSION && len == 4 && (tagType == 3)) {
|
|
p_response = &responses[RESP_INDEX_VERSION];
|
|
} else if ((receivedCmd[0] == MIFARE_AUTH_KEYA || receivedCmd[0] == MIFARE_AUTH_KEYB) && len == 4 && tagType != 2 && tagType != 7 && tagType != 13 && tagType != 14) { // Received an authentication request
|
|
cardAUTHKEY = receivedCmd[0] - 0x60;
|
|
cardAUTHSC = receivedCmd[1] / 4; // received block num
|
|
|
|
// incease nonce at AUTH requests. this is time consuming.
|
|
nonce = prng_successor(GetTickCount(), 32);
|
|
num_to_bytes(nonce, 4, dynamic_response_info.response);
|
|
dynamic_response_info.response_n = 4;
|
|
|
|
prepare_tag_modulation(&dynamic_response_info, dynamic_modulation_buffer_size);
|
|
p_response = &dynamic_response_info;
|
|
order = ORDER_AUTH;
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_RATS && len == 4) { // Received a RATS request
|
|
if (tagType == 1 || tagType == 2) { // RATS not supported
|
|
EmSend4bit(CARD_NACK_NA);
|
|
p_response = NULL;
|
|
} else {
|
|
p_response = &responses[RESP_INDEX_ATS];
|
|
}
|
|
|
|
} else if (receivedCmd[0] == MIFARE_ULC_AUTH_1 && len == 4 && tagType == 13) { // ULC authentication, or Desfire Authentication
|
|
|
|
// reset IV to all zeros
|
|
memset(ulc_iv, 0x00, 8);
|
|
|
|
if (ulc_reread_key) {
|
|
Simulate_read_ulc_key(ulc_key);
|
|
ulc_reread_key = false;
|
|
}
|
|
|
|
dynamic_response_info.response[0] = MIFARE_ULC_AUTH_2;
|
|
|
|
// our very random TAG NONCE
|
|
memcpy(dynamic_response_info.response + 1, ULC_TAG_NONCE, 8);
|
|
|
|
if (ulauth_1a1_len == 8 && ulauth_1a1 != NULL) {
|
|
memcpy(dynamic_response_info.response + 1, ulauth_1a1, ulauth_1a1_len);
|
|
} else {
|
|
// encrypt TAG NONCE
|
|
tdes_nxp_send(dynamic_response_info.response + 1, dynamic_response_info.response + 1, 8, ulc_key, ulc_iv, 2);
|
|
}
|
|
|
|
// Add CRC
|
|
AddCrc14A(dynamic_response_info.response, 9);
|
|
|
|
// prepare to send
|
|
dynamic_response_info.response_n = 1 + 8 + 2;
|
|
prepare_tag_modulation(&dynamic_response_info, dynamic_modulation_buffer_size);
|
|
p_response = &dynamic_response_info;
|
|
order = ORDER_AUTH;
|
|
|
|
} else if (receivedCmd[0] == MIFARE_ULC_AUTH_2 && len == 19 && tagType == 13) { // ULC authentication, or Desfire Authentication
|
|
|
|
uint8_t enc_rnd_ab[16] = { 0x00 };
|
|
uint8_t rnd_ab[16] = { 0x00 };
|
|
|
|
// copy reader response
|
|
memcpy(enc_rnd_ab, receivedCmd + 1, 16);
|
|
|
|
// decrypt
|
|
tdes_nxp_receive(enc_rnd_ab, rnd_ab, 16, ulc_key, ulc_iv, 2);
|
|
|
|
ror(rnd_ab + 8, 8);
|
|
|
|
if (memcmp(rnd_ab + 8, ULC_TAG_NONCE, 8) != 0) {
|
|
Dbprintf("failed authentication");
|
|
if (ulauth_1a2_len == 8 && ulauth_1a2 != NULL) {
|
|
Dbprintf("but honoring --1a2 anyway");
|
|
} else if (ulauth_1a2_mirror) {
|
|
Dbprintf("but honoring --1a2-mirror anyway");
|
|
} else {
|
|
EmSend4bit(CARD_NACK_IV);
|
|
p_response = NULL;
|
|
goto jump;
|
|
}
|
|
}
|
|
|
|
// OK response
|
|
dynamic_response_info.response[0] = 0x00;
|
|
|
|
if (ulauth_1a2_len == 8 && ulauth_1a2 != NULL) {
|
|
memcpy(dynamic_response_info.response + 1, ulauth_1a2, ulauth_1a2_len);
|
|
} else {
|
|
// rol RndA
|
|
rol(rnd_ab, 8);
|
|
|
|
// encrypt RndA
|
|
tdes_nxp_send(rnd_ab, dynamic_response_info.response + 1, 8, ulc_key, ulc_iv, 2);
|
|
if (ulauth_1a2_mirror) {
|
|
memcpy(dynamic_response_info.response + 1, enc_rnd_ab, 8);
|
|
}
|
|
}
|
|
|
|
// Add CRC
|
|
AddCrc14A(dynamic_response_info.response, 9);
|
|
|
|
dynamic_response_info.response_n = 1 + 8 + 2;
|
|
|
|
prepare_tag_modulation(&dynamic_response_info, dynamic_modulation_buffer_size);
|
|
p_response = &dynamic_response_info;
|
|
order = ORDER_NONE;
|
|
|
|
} else if (receivedCmd[0] == MIFARE_ULC_AUTH_1 && len == 4 && tagType == 14) { // ULAES authentication
|
|
|
|
memset(ulc_iv, 0x00, 16);
|
|
|
|
if (ulaes_reread_key) {
|
|
Simulate_read_ulaes_key0(ulc_key);
|
|
ulaes_reread_key = false;
|
|
}
|
|
|
|
dynamic_response_info.response[0] = MIFARE_ULC_AUTH_2;
|
|
|
|
// our very random TAG NONCE
|
|
memcpy(dynamic_response_info.response + 1, ULC_TAG_NONCE, 8);
|
|
memcpy(dynamic_response_info.response + 9, ULC_TAG_NONCE, 8);
|
|
|
|
if (ulauth_1a1_len == 16 && ulauth_1a1 != NULL) {
|
|
memcpy(dynamic_response_info.response + 1, ulauth_1a1, ulauth_1a1_len);
|
|
} else {
|
|
// encrypt TAG NONCE
|
|
aes128_nxp_send(dynamic_response_info.response + 1, dynamic_response_info.response + 1, 16, ulc_key, ulc_iv);
|
|
}
|
|
|
|
// Add CRC
|
|
AddCrc14A(dynamic_response_info.response, 17);
|
|
|
|
// prepare to send
|
|
dynamic_response_info.response_n = 1 + 16 + 2;
|
|
prepare_tag_modulation(&dynamic_response_info, dynamic_modulation_buffer_size);
|
|
p_response = &dynamic_response_info;
|
|
order = ORDER_AUTH;
|
|
|
|
} else if (receivedCmd[0] == MIFARE_ULC_AUTH_2 && len == 35 && tagType == 14) { // ULAES authentication
|
|
|
|
memset(ulc_iv, 0x00, 16);
|
|
uint8_t enc_rnd_ab[32] = { 0x00 };
|
|
uint8_t rnd_ab[32] = { 0x00 };
|
|
|
|
// copy reader response
|
|
memcpy(enc_rnd_ab, receivedCmd + 1, 32);
|
|
|
|
// decrypt
|
|
aes128_nxp_receive(enc_rnd_ab, rnd_ab, 32, ulc_key, ulc_iv);
|
|
|
|
ror(rnd_ab + 16, 16);
|
|
|
|
// Remember our tag nonce is twice the ULC_TAG_NONCE
|
|
if ((memcmp(rnd_ab + 16, ULC_TAG_NONCE, 8) != 0) || (memcmp(rnd_ab + 24, ULC_TAG_NONCE, 8) != 0)) {
|
|
Dbprintf("failed authentication");
|
|
if (ulauth_1a2_len == 16 && ulauth_1a2 != NULL) {
|
|
Dbprintf("but honoring --1a2 anyway");
|
|
} else if (ulauth_1a2_mirror) {
|
|
Dbprintf("but honoring --1a2-mirror anyway");
|
|
} else {
|
|
EmSend4bit(CARD_NACK_IV);
|
|
p_response = NULL;
|
|
goto jump;
|
|
}
|
|
}
|
|
|
|
// OK response
|
|
dynamic_response_info.response[0] = 0x00;
|
|
|
|
if (ulauth_1a2_len == 16 && ulauth_1a2 != NULL) {
|
|
memcpy(dynamic_response_info.response + 1, ulauth_1a2, ulauth_1a2_len);
|
|
} else {
|
|
// rol RndA
|
|
rol(rnd_ab, 16);
|
|
|
|
memset(ulc_iv, 0x00, 16);
|
|
// encrypt RndA
|
|
aes128_nxp_send(rnd_ab, dynamic_response_info.response + 1, 16, ulc_key, ulc_iv);
|
|
if (ulauth_1a2_mirror) {
|
|
memcpy(dynamic_response_info.response + 1, enc_rnd_ab, 16);
|
|
}
|
|
}
|
|
|
|
// Add CRC
|
|
AddCrc14A(dynamic_response_info.response, 17);
|
|
|
|
dynamic_response_info.response_n = 1 + 16 + 2;
|
|
|
|
prepare_tag_modulation(&dynamic_response_info, dynamic_modulation_buffer_size);
|
|
p_response = &dynamic_response_info;
|
|
order = ORDER_NONE;
|
|
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_AUTH && len == 7 && tagType == 7) { // NTAG / EV-1
|
|
uint8_t pwd[4] = {0, 0, 0, 0};
|
|
emlGet(pwd, (pages - 1) * 4 + MFU_DUMP_PREFIX_LENGTH, sizeof(pwd));
|
|
if (g_dbglevel >= DBG_DEBUG) {
|
|
Dbprintf("Reader sent password: ");
|
|
Dbhexdump(4, receivedCmd + 1, 0);
|
|
Dbprintf("Loaded password from memory: ");
|
|
Dbhexdump(4, pwd, 0);
|
|
}
|
|
|
|
// PWD comes straight from emulator memory (read above). For an unset (all-zero)
|
|
// PWD, the Amiibo password is populated into memory at sim init, so there's no
|
|
// substitution here -- eset/eview stay authoritative.
|
|
if (memcmp(receivedCmd + 1, pwd, 4) == 0) {
|
|
if (g_dbglevel >= DBG_DEBUG) Dbprintf("Password match, responding with PACK.");
|
|
|
|
// Serve PACK straight from the PACK page (page `pages`) in emulator memory, so
|
|
// eset/eload of the PACK page is honored live. The Amiibo PACK (0x8080) for an
|
|
// unset PWD is populated into memory at sim init, so nothing special-cases here.
|
|
uint8_t pack_live[4] = {0, 0, 0, 0};
|
|
emlGet(pack_live, pages * 4 + MFU_DUMP_PREFIX_LENGTH, 2);
|
|
|
|
dynamic_response_info.response[0] = pack_live[0];
|
|
dynamic_response_info.response[1] = pack_live[1];
|
|
AddCrc14A(dynamic_response_info.response, 2);
|
|
dynamic_response_info.response_n = 4; // 2 PACK + 2 CRC
|
|
prepare_tag_modulation(&dynamic_response_info, dynamic_modulation_buffer_size);
|
|
p_response = &dynamic_response_info;
|
|
} else {
|
|
if (g_dbglevel >= DBG_DEBUG) Dbprintf("Password did not match, NACK_IV.");
|
|
p_response = NULL;
|
|
EmSend4bit(CARD_NACK_IV);
|
|
}
|
|
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_VCSL && len == 23 && tagType == 7) {
|
|
uint8_t cmd[3] = {0, 0, 0};
|
|
emlGet(cmd, (pages - 2) * 4 + 1 + MFU_DUMP_PREFIX_LENGTH, 1);
|
|
AddCrc14A(cmd, sizeof(cmd) - 2);
|
|
EmSendCmd(cmd, sizeof(cmd));
|
|
p_response = NULL;
|
|
|
|
} else if (receivedCmd[0] == MFP_WRITEPERSO && len == 21 && (tagType == 15)) {
|
|
// cmd + 2 bytes block + value + 2 bytes crc
|
|
if (CheckCrc14A(receivedCmd, len)) {
|
|
uint16_t page = receivedCmd[1] | (receivedCmd[2] << 8);
|
|
if (page > 0x9005 || page < 0x9000) {
|
|
// send NACK 0x0 == invalid argument
|
|
EmSend4bit(CARD_NACK_IV);
|
|
} else {
|
|
// send ACK
|
|
EmSend4bit(CARD_ACK);
|
|
|
|
Dbprintf("MFP Perso Key | %04X | %02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X",
|
|
page,
|
|
receivedCmd[3],
|
|
receivedCmd[4],
|
|
receivedCmd[5],
|
|
receivedCmd[6],
|
|
receivedCmd[7],
|
|
receivedCmd[8],
|
|
receivedCmd[9],
|
|
receivedCmd[10],
|
|
receivedCmd[11],
|
|
receivedCmd[12],
|
|
receivedCmd[13],
|
|
receivedCmd[14],
|
|
receivedCmd[15],
|
|
receivedCmd[16],
|
|
receivedCmd[17],
|
|
receivedCmd[18]
|
|
);
|
|
|
|
numReads++; // Increment number of times reader requested a block
|
|
|
|
if (exitAfterNReads > 0 && numReads == exitAfterNReads) {
|
|
finished = true;
|
|
}
|
|
}
|
|
} else {
|
|
// send NACK 0x1 == crc/parity error
|
|
EmSend4bit(CARD_NACK_PA);
|
|
}
|
|
p_response = NULL;
|
|
|
|
} else {
|
|
|
|
// clear old dynamic responses
|
|
dynamic_response_info.response_n = 0;
|
|
dynamic_response_info.modulation_n = 0;
|
|
|
|
// ST25TA512B IKEA Rothult
|
|
if (tagType == 10) {
|
|
// we replay 90 00 for all commands but the read bin and we deny the verify cmd.
|
|
|
|
static const uint8_t default_st25ta_ndef[] = {
|
|
0x00, 0x1b, 0xd1, 0x01, 0x17, 0x54, 0x02, 0x7a,
|
|
0x68, 0xa2, 0x34, 0xcb, 0xd0, 0xe2, 0x03, 0xc7,
|
|
0x3e, 0x62, 0x0b, 0xe8, 0xc6, 0x3c, 0x85, 0x2c,
|
|
0xc5, 0x31, 0x31, 0x31, 0x32, 0x90, 0x00
|
|
};
|
|
const uint8_t *ndef = default_st25ta_ndef;
|
|
uint16_t ndef_len = sizeof(default_st25ta_ndef);
|
|
|
|
if (st25ta_ndef_len > 0) {
|
|
ndef = st25ta_ndef;
|
|
ndef_len = st25ta_ndef_len;
|
|
}
|
|
|
|
if (memcmp("\x02\xa2\xb0\x00\x00\x1d\x51\x69", receivedCmd, 8) == 0) {
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
memcpy(dynamic_response_info.response + 1, ndef, ndef_len);
|
|
dynamic_response_info.response_n = ndef_len + 1;
|
|
} else if (memcmp("\x02\x00\x20\x00\x01\x00\x6e\xa9", receivedCmd, 8) == 0) {
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x63;
|
|
dynamic_response_info.response[2] = 0x00;
|
|
dynamic_response_info.response_n = 3;
|
|
} else if (memcmp("\x03\x00\x20\x00\x01\x10", receivedCmd, 6) == 0) {
|
|
Dbprintf("Reader sent password: ");
|
|
Dbhexdump(16, receivedCmd + 6, 0);
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x90;
|
|
dynamic_response_info.response[2] = 0x00;
|
|
dynamic_response_info.response_n = 3;
|
|
} else {
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x90;
|
|
dynamic_response_info.response[2] = 0x00;
|
|
dynamic_response_info.response_n = 3;
|
|
}
|
|
} else {
|
|
|
|
// Check for ISO 14443A-4 compliant commands, look at left nibble
|
|
switch (receivedCmd[0]) {
|
|
case 0x02:
|
|
case 0x03: { // IBlock (command no CID)
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x90;
|
|
dynamic_response_info.response[2] = 0x00;
|
|
dynamic_response_info.response_n = 3;
|
|
}
|
|
break;
|
|
case 0x0B:
|
|
case 0x0A: { // IBlock (command CID)
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x00;
|
|
dynamic_response_info.response[2] = 0x90;
|
|
dynamic_response_info.response[3] = 0x00;
|
|
dynamic_response_info.response_n = 4;
|
|
}
|
|
break;
|
|
|
|
case 0x1A:
|
|
case 0x1B: { // Chaining command
|
|
dynamic_response_info.response[0] = 0xaa | ((receivedCmd[0]) & 1);
|
|
dynamic_response_info.response_n = 2;
|
|
}
|
|
break;
|
|
|
|
case 0xAA:
|
|
case 0xBB: {
|
|
dynamic_response_info.response[0] = receivedCmd[0] ^ 0x11;
|
|
dynamic_response_info.response_n = 2;
|
|
}
|
|
break;
|
|
|
|
case 0xBA: { // ping / pong
|
|
dynamic_response_info.response[0] = 0xAB;
|
|
dynamic_response_info.response[1] = 0x00;
|
|
dynamic_response_info.response_n = 2;
|
|
}
|
|
break;
|
|
|
|
case 0xCA:
|
|
case 0xC2: { // Readers sends deselect command
|
|
dynamic_response_info.response[0] = 0xCA;
|
|
dynamic_response_info.response[1] = 0x00;
|
|
dynamic_response_info.response_n = 2;
|
|
}
|
|
break;
|
|
|
|
default: {
|
|
// Never seen this command before
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
if (g_dbglevel >= DBG_DEBUG) {
|
|
Dbprintf("Received unknown command (len=%d):", len);
|
|
Dbhexdump(len, receivedCmd, false);
|
|
}
|
|
// Do not respond
|
|
dynamic_response_info.response_n = 0;
|
|
order = ORDER_NONE; // back to work state
|
|
}
|
|
break;
|
|
}
|
|
|
|
}
|
|
if (dynamic_response_info.response_n > 0) {
|
|
|
|
// Copy the CID from the reader query (only when CID bit is set in PCB).
|
|
if (tagType != 10 && (receivedCmd[0] & 0x08))
|
|
dynamic_response_info.response[1] = receivedCmd[1];
|
|
|
|
// Add CRC bytes, always used in ISO 14443A-4 compliant cards
|
|
AddCrc14A(dynamic_response_info.response, dynamic_response_info.response_n);
|
|
dynamic_response_info.response_n += 2;
|
|
|
|
if (prepare_tag_modulation(&dynamic_response_info, dynamic_modulation_buffer_size) == false) {
|
|
if (g_dbglevel >= DBG_DEBUG) DbpString("Error preparing tag response");
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
p_response = &dynamic_response_info;
|
|
}
|
|
}
|
|
|
|
// Count number of wakeups received after a halt
|
|
// if (order == ORDER_WUPA && lastorder == ORDER_HALTED) { happened++; }
|
|
|
|
// Count number of other messages after a halt
|
|
// if (order != ORDER_WUPA && lastorder == ORDER_HALTED) { happened2++; }
|
|
jump:
|
|
|
|
cmdsRecvd++;
|
|
|
|
// Send response
|
|
EmSendPrecompiledCmd(p_response);
|
|
}
|
|
|
|
switch_off();
|
|
|
|
set_tracing(false);
|
|
BigBuf_free_keep_EM();
|
|
|
|
if (g_dbglevel >= DBG_EXTENDED) {
|
|
// Dbprintf("-[ Wake ups after halt [%d]", happened);
|
|
// Dbprintf("-[ Messages after halt [%d]", happened2);
|
|
Dbprintf("-[ Num of received cmd [%d]", cmdsRecvd);
|
|
Dbprintf("-[ Num of moebius tries [%d]", moebius_count);
|
|
}
|
|
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, retval, NULL, 0);
|
|
}
|
|
|
|
// prepare a delayed transfer. This simply shifts ToSend[] by a number
|
|
// of bits specified in the delay parameter.
|
|
static void PrepareDelayedTransfer(uint16_t delay) {
|
|
delay &= 0x07;
|
|
if (delay == 0) {
|
|
return;
|
|
}
|
|
|
|
uint8_t bitmask = 0;
|
|
uint8_t bits_shifted = 0;
|
|
|
|
for (uint16_t i = 0; i < delay; i++) {
|
|
bitmask |= (0x01 << i);
|
|
}
|
|
|
|
tosend_t *ts = get_tosend();
|
|
|
|
ts->buf[ts->max++] = 0x00;
|
|
|
|
for (uint32_t i = 0; i < ts->max; i++) {
|
|
uint8_t bits_to_shift = ts->buf[i] & bitmask;
|
|
ts->buf[i] = ts->buf[i] >> delay;
|
|
ts->buf[i] = ts->buf[i] | (bits_shifted << (8 - delay));
|
|
bits_shifted = bits_to_shift;
|
|
}
|
|
}
|
|
|
|
//-------------------------------------------------------------------------------------
|
|
// Transmit the command (to the tag) that was placed in ToSend[].
|
|
// Parameter timing:
|
|
// if NULL: transfer at next possible time, taking into account
|
|
// request guard time and frame delay time
|
|
// if == 0: transfer immediately and return time of transfer
|
|
// if != 0: delay transfer until time specified
|
|
//-------------------------------------------------------------------------------------
|
|
static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing) {
|
|
|
|
if (g_hf_field_active == false) {
|
|
Dbprintf("Warning: HF field is off");
|
|
return;
|
|
}
|
|
|
|
// DXL: If the mode is set to FPGA_MAJOR_MODE_OFF before transmission, the timing wait will freeze.
|
|
// If you need to handle this situation, you can uncomment the code below(SPEED is affected).
|
|
// And do not use the FPGA_HF_ISO14443A_READER_MOD!!!
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_LISTEN);
|
|
|
|
if (timing) {
|
|
|
|
if (*timing == 0) { // Measure time
|
|
*timing = (GetCountSspClk() + 8) & 0xfffffff8;
|
|
} else {
|
|
PrepareDelayedTransfer(*timing & 0x00000007); // Delay transfer (fine tuning - up to 7 MF clock ticks)
|
|
}
|
|
|
|
while (GetCountSspClk() < (*timing & 0xfffffff8)) {}; // Delay transfer (multiple of 8 MF clock ticks)
|
|
LastTimeProxToAirStart = *timing;
|
|
|
|
} else {
|
|
|
|
uint32_t ThisTransferTime = 0;
|
|
ThisTransferTime = ((MAX(NextTransferTime, GetCountSspClk()) & 0xfffffff8) + 8);
|
|
|
|
while (GetCountSspClk() < ThisTransferTime) {};
|
|
LastTimeProxToAirStart = ThisTransferTime;
|
|
|
|
}
|
|
|
|
// DXL: Switch to this mode before actually starting to send. Otherwise, it may cause delays between frames to fail.
|
|
// 14b also has this problem, which requires waiting for the frame delay to complete
|
|
// before switching to modulation transmission mode to send data.
|
|
// If we don't do this, there is a possibility of randomly encountering communication exception bugs
|
|
// on high-performance processors such as AT32, which is very fatal!
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
|
|
|
|
// If the transmission is not cleared, there is a high probability of communication abnormalities.
|
|
// I suspect that the wrong DOUT level may have modulated data that should not have been modulated.
|
|
// If further research is needed, an oscilloscope needs to be used to observe the specific DOUT modulation status.
|
|
// ---
|
|
// Clear TXRDY:
|
|
while (!FPGA_SSC_TX_Ready()) {}
|
|
FPGA_SSC_TX_Value(SEC_Y);
|
|
|
|
uint16_t c = 0;
|
|
while (c < len) {
|
|
if (FPGA_SSC_TX_Ready()) {
|
|
FPGA_SSC_TX_Value(cmd[c]);
|
|
c++;
|
|
}
|
|
}
|
|
|
|
NextTransferTime = MAX(NextTransferTime, LastTimeProxToAirStart + REQUEST_GUARD_TIME);
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Prepare reader command (in bits, support short frames) to send to FPGA
|
|
//-----------------------------------------------------------------------------
|
|
static void CodeIso14443aBitsAsReaderPar(const uint8_t *cmd, uint16_t bits, const uint8_t *par) {
|
|
int last = 0;
|
|
|
|
tosend_reset();
|
|
tosend_t *ts = get_tosend();
|
|
|
|
// Start of Communication (Seq. Z)
|
|
ts->buf[++ts->max] = SEC_Z;
|
|
LastProxToAirDuration = 8 * (ts->max + 1) - 6;
|
|
|
|
size_t bytecount = nbytes(bits);
|
|
// Generate send structure for the data bits
|
|
for (int i = 0; i < bytecount; i++) {
|
|
// Get the current byte to send
|
|
uint8_t b = cmd[i];
|
|
size_t bitsleft = MIN((bits - (i * 8)), 8);
|
|
int j;
|
|
for (j = 0; j < bitsleft; j++) {
|
|
if (b & 1) {
|
|
// Sequence X
|
|
ts->buf[++ts->max] = SEC_X;
|
|
LastProxToAirDuration = 8 * (ts->max + 1) - 2;
|
|
last = 1;
|
|
} else {
|
|
if (last == 0) {
|
|
// Sequence Z
|
|
ts->buf[++ts->max] = SEC_Z;
|
|
LastProxToAirDuration = 8 * (ts->max + 1) - 6;
|
|
} else {
|
|
// Sequence Y
|
|
ts->buf[++ts->max] = SEC_Y;
|
|
last = 0;
|
|
}
|
|
}
|
|
b >>= 1;
|
|
}
|
|
|
|
// Only transmit parity bit if we transmitted a complete byte
|
|
if (j == 8 && par != NULL) {
|
|
// Get the parity bit
|
|
if (par[i >> 3] & (0x80 >> (i & 0x0007))) {
|
|
// Sequence X
|
|
ts->buf[++ts->max] = SEC_X;
|
|
LastProxToAirDuration = 8 * (ts->max + 1) - 2;
|
|
last = 1;
|
|
} else {
|
|
if (last == 0) {
|
|
// Sequence Z
|
|
ts->buf[++ts->max] = SEC_Z;
|
|
LastProxToAirDuration = 8 * (ts->max + 1) - 6;
|
|
} else {
|
|
// Sequence Y
|
|
ts->buf[++ts->max] = SEC_Y;
|
|
last = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// End of Communication: Logic 0 followed by Sequence Y
|
|
if (last == 0) {
|
|
// Sequence Z
|
|
ts->buf[++ts->max] = SEC_Z;
|
|
LastProxToAirDuration = 8 * (ts->max + 1) - 6;
|
|
} else {
|
|
// Sequence Y
|
|
ts->buf[++ts->max] = SEC_Y;
|
|
}
|
|
ts->buf[++ts->max] = SEC_Y;
|
|
|
|
// Convert to length of command:
|
|
ts->max++;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Prepare reader command to send to FPGA
|
|
//-----------------------------------------------------------------------------
|
|
/*
|
|
static void CodeIso14443aAsReaderPar(const uint8_t *cmd, uint16_t len, const uint8_t *par) {
|
|
CodeIso14443aBitsAsReaderPar(cmd, len * 8, par);
|
|
}
|
|
*/
|
|
//-----------------------------------------------------------------------------
|
|
// Wait for commands from reader
|
|
// Stop when button is pressed (return 1), field was gone (return 2),
|
|
// or an optional timeout expires (return 3)
|
|
// Or return 0 when command is captured
|
|
//-----------------------------------------------------------------------------
|
|
int EmGetCmdTimeout(uint8_t *received, uint16_t received_max_len, uint16_t *len, uint8_t *par, uint32_t timeout_ms) {
|
|
*len = 0;
|
|
|
|
uint32_t started = timeout_ms ? GetTickCount() : 0;
|
|
uint32_t timer = 0;
|
|
int analogCnt = 0;
|
|
int analogAVG = 0;
|
|
|
|
// Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen
|
|
// only, since we are receiving, not transmitting).
|
|
// Signal field is off with the appropriate LED
|
|
LED_D_OFF();
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
AdcSetupRssiChannel(ADC_RSSI_CH_HF);
|
|
|
|
// Now run a 'software UART' on the stream of incoming samples.
|
|
Uart14aInit(received, received_max_len, par);
|
|
|
|
// Clear RXRDY:
|
|
uint8_t b = (uint8_t)FPGA_SSC_RX_Value();
|
|
(void)b;
|
|
|
|
uint8_t flip = 0;
|
|
uint16_t checker = 4000;
|
|
for (;;) {
|
|
WDT_HIT();
|
|
|
|
// ever 3 * 4000, check if we got any data from client
|
|
// takes long time, usually messes with simualtion
|
|
if (flip == 3) {
|
|
if (data_available()) {
|
|
Dbprintf("----------- " _GREEN_("Breaking / Data") " ----------");
|
|
return 1;
|
|
}
|
|
flip = 0;
|
|
}
|
|
|
|
// button press, takes a bit time, might mess with simualtion
|
|
if (checker-- == 0) {
|
|
if (BUTTON_PRESS()) {
|
|
Dbprintf("----------- " _GREEN_("Button pressed, user aborted") " ----------");
|
|
return 1;
|
|
}
|
|
|
|
// Keep USB enumeration alive while this real-time loop waits for RF.
|
|
if (Uart.state == STATE_14A_UNSYNCD) {
|
|
usb_check();
|
|
}
|
|
if (timeout_ms && GetTickCountDelta(started) >= timeout_ms) {
|
|
return 3;
|
|
}
|
|
|
|
flip++;
|
|
checker = 4000;
|
|
}
|
|
|
|
|
|
// test if the field exists
|
|
if (AdcRssiDataReady(ADC_RSSI_CH_HF)) {
|
|
|
|
analogCnt++;
|
|
|
|
analogAVG += AdcRssiDataRead(ADC_RSSI_CH_HF);
|
|
|
|
AdcRssiConversionStart();
|
|
|
|
if (analogCnt >= 32) {
|
|
|
|
if (AdcRssiDataToMilliVolt(analogAVG / analogCnt, ADC_RSSI_CH_HF) < MF_MINFIELDV) {
|
|
|
|
if (timer == 0) {
|
|
timer = GetTickCount();
|
|
} else {
|
|
// 4ms no field --> card to idle state
|
|
if (GetTickCountDelta(timer) > 4) {
|
|
return 2;
|
|
}
|
|
}
|
|
} else {
|
|
timer = 0;
|
|
}
|
|
analogCnt = 0;
|
|
analogAVG = 0;
|
|
}
|
|
}
|
|
|
|
// receive and test the miller decoding
|
|
if (FPGA_SSC_RX_Ready()) {
|
|
b = (uint8_t)FPGA_SSC_RX_Value();
|
|
if (MillerDecoding(b, 0)) {
|
|
*len = Uart.len;
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
int EmGetCmd(uint8_t *received, uint16_t received_max_len, uint16_t *len, uint8_t *par) {
|
|
return EmGetCmdTimeout(received, received_max_len, len, par, 0);
|
|
}
|
|
|
|
int EmSendCmd14443aRaw(const uint8_t *resp, uint16_t respLen) {
|
|
volatile uint8_t b;
|
|
uint16_t i = 0;
|
|
uint32_t ThisTransferTime = 0;
|
|
bool correction_needed;
|
|
|
|
// Modulate Manchester
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD);
|
|
|
|
// Include correction bit if necessary
|
|
if (Uart.bitCount == 7) {
|
|
// Short tags (7 bits) don't have parity, determine the correct value from MSB
|
|
correction_needed = Uart.output[0] & 0x40;
|
|
} else {
|
|
// The parity bits are left-aligned
|
|
correction_needed = Uart.parity[(Uart.len - 1) / 8] & (0x80 >> ((Uart.len - 1) & 7));
|
|
}
|
|
// 1236, so correction bit needed
|
|
i = (correction_needed) ? 0 : 1;
|
|
|
|
// clear receiving shift register and holding register
|
|
FPGA_SSC_RX_READY_WAIT();
|
|
b = FPGA_SSC_RX_Value();
|
|
(void) b;
|
|
|
|
// wait for the FPGA to signal fdt_indicator == 1 (the FPGA is ready to queue new data in its delay line)
|
|
for (uint8_t j = 0; j < 5; j++) { // allow timeout - better late than never
|
|
FPGA_SSC_RX_READY_WAIT();
|
|
if (FPGA_SSC_RX_Value()) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
while ((ThisTransferTime = GetCountSspClk()) & 0x00000007);
|
|
|
|
// Clear TXRDY:
|
|
while (!FPGA_SSC_TX_Ready()) {}
|
|
FPGA_SSC_TX_Value(SEC_F);
|
|
|
|
// send cycle
|
|
for (; i < respLen;) {
|
|
if (FPGA_SSC_TX_Ready()) {
|
|
FPGA_SSC_TX_Value(resp[i++]);
|
|
FPGA_SSC_RX_READY_WAIT();
|
|
FpgaSendQueueDelay = (uint8_t)FPGA_SSC_RX_Value();
|
|
}
|
|
}
|
|
|
|
// Ensure that the FPGA Delay Queue is empty before we switch to TAGSIM_LISTEN again:
|
|
uint8_t fpga_queued_bits = FpgaSendQueueDelay >> 3;
|
|
for (i = 0; i <= (fpga_queued_bits >> 3) + 1;) {
|
|
if (FPGA_SSC_TX_Ready()) {
|
|
FPGA_SSC_TX_Value(SEC_F);
|
|
FPGA_SSC_RX_READY_WAIT();
|
|
FpgaSendQueueDelay = (uint8_t)FPGA_SSC_RX_Value();
|
|
i++;
|
|
}
|
|
}
|
|
LastTimeProxToAirStart = ThisTransferTime + (correction_needed ? 8 : 0);
|
|
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
int EmSend4bit(uint8_t resp) {
|
|
Code4bitAnswerAsTag(resp);
|
|
const tosend_t *ts = get_tosend();
|
|
int res = EmSendCmd14443aRaw(ts->buf, ts->max);
|
|
// do the tracing for the previous reader request and this tag answer:
|
|
uint8_t par[1] = {0x00};
|
|
GetParity(&resp, 1, par);
|
|
EmLogTrace(Uart.output,
|
|
Uart.len,
|
|
Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.parity,
|
|
&resp,
|
|
1,
|
|
LastTimeProxToAirStart * 16 + DELAY_ARM2AIR_AS_TAG,
|
|
(LastTimeProxToAirStart + LastProxToAirDuration) * 16 + DELAY_ARM2AIR_AS_TAG,
|
|
par);
|
|
return res;
|
|
}
|
|
int EmSendCmdPar(uint8_t *resp, uint16_t respLen, uint8_t *par) {
|
|
return EmSendCmdParEx(resp, respLen, par, false);
|
|
}
|
|
int EmSendCmdParEx(uint8_t *resp, uint16_t respLen, uint8_t *par, bool collision) {
|
|
CodeIso14443aAsTagPar(resp, respLen, par, collision);
|
|
const tosend_t *ts = get_tosend();
|
|
int res = EmSendCmd14443aRaw(ts->buf, ts->max);
|
|
|
|
// do the tracing for the previous reader request and this tag answer:
|
|
EmLogTrace(Uart.output,
|
|
Uart.len,
|
|
Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.parity,
|
|
resp,
|
|
respLen,
|
|
LastTimeProxToAirStart * 16 + DELAY_ARM2AIR_AS_TAG,
|
|
(LastTimeProxToAirStart + LastProxToAirDuration) * 16 + DELAY_ARM2AIR_AS_TAG,
|
|
par);
|
|
return res;
|
|
}
|
|
int EmSendCmd(uint8_t *resp, uint16_t respLen) {
|
|
return EmSendCmdEx(resp, respLen, false);
|
|
}
|
|
int EmSendCmdEx(uint8_t *resp, uint16_t respLen, bool collision) {
|
|
GetParity(resp, respLen, parity_array);
|
|
return EmSendCmdParEx(resp, respLen, parity_array, collision);
|
|
}
|
|
|
|
int EmSendPrecompiledCmd(tag_response_info_t *p_response) {
|
|
if (p_response == NULL) {
|
|
return 0;
|
|
}
|
|
|
|
int ret = EmSendCmd14443aRaw(p_response->modulation, p_response->modulation_n);
|
|
// do the tracing for the previous reader request and this tag answer:
|
|
GetParity(p_response->response, p_response->response_n, parity_array);
|
|
|
|
EmLogTrace(Uart.output,
|
|
Uart.len,
|
|
Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.parity,
|
|
p_response->response,
|
|
p_response->response_n,
|
|
LastTimeProxToAirStart * 16 + DELAY_ARM2AIR_AS_TAG,
|
|
(LastTimeProxToAirStart + p_response->ProxToAirDuration) * 16 + DELAY_ARM2AIR_AS_TAG,
|
|
parity_array);
|
|
return ret;
|
|
}
|
|
|
|
bool EmLogTrace(const uint8_t *reader_data, uint16_t reader_len, uint32_t reader_StartTime,
|
|
uint32_t reader_EndTime, const uint8_t *reader_Parity, const uint8_t *tag_data,
|
|
uint16_t tag_len, uint32_t tag_StartTime, uint32_t tag_EndTime, const uint8_t *tag_Parity) {
|
|
|
|
// we cannot exactly measure the end and start of a received command from reader. However we know that the delay from
|
|
// end of the received command to start of the tag's (simulated by us) answer is n*128+20 or n*128+84 resp.
|
|
// with n >= 9. The start of the tags answer can be measured and therefore the end of the received command be calculated:
|
|
|
|
uint16_t reader_modlen = reader_EndTime - reader_StartTime;
|
|
uint16_t approx_fdt = tag_StartTime - reader_EndTime;
|
|
uint16_t exact_fdt = (approx_fdt - 20 + 32) / 64 * 64 + 20;
|
|
reader_EndTime = tag_StartTime - exact_fdt;
|
|
reader_StartTime = reader_EndTime - reader_modlen;
|
|
|
|
if (!LogTrace(reader_data, reader_len, reader_StartTime, reader_EndTime, reader_Parity, true))
|
|
return false;
|
|
else
|
|
return (!LogTrace(tag_data, tag_len, tag_StartTime, tag_EndTime, tag_Parity, false));
|
|
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Kovio - Thinfilm barcode. TAG-TALK-FIRST -
|
|
// Wait a certain time for tag response
|
|
// If a response is captured return TRUE
|
|
// If it takes too long return FALSE
|
|
//-----------------------------------------------------------------------------
|
|
bool GetIso14443aAnswerFromTag_Thinfilm(uint8_t *receivedResponse, uint16_t rec_maxlen, uint8_t *received_len) {
|
|
|
|
if (g_hf_field_active == false) {
|
|
Dbprintf("Warning: HF field is off");
|
|
return false;
|
|
}
|
|
|
|
// Set FPGA mode to "reader listen mode", no modulation (listen
|
|
// only, since we are receiving, not transmitting).
|
|
// Signal field is on with the appropriate LED
|
|
LED_D_ON();
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_LISTEN);
|
|
|
|
// Now get the answer from the card
|
|
Demod14aInit(receivedResponse, rec_maxlen, NULL);
|
|
|
|
// clear RXRDY:
|
|
uint8_t b = (uint8_t)FPGA_SSC_RX_Value();
|
|
(void)b;
|
|
|
|
uint32_t timeout = iso14a_get_timeout();
|
|
uint32_t receive_timer = GetTickCount();
|
|
|
|
for (;;) {
|
|
WDT_HIT();
|
|
|
|
if (FPGA_SSC_RX_Ready()) {
|
|
b = (uint8_t)FPGA_SSC_RX_Value();
|
|
if (ManchesterDecoding_Thinfilm(b, 0)) {
|
|
*received_len = Demod.len;
|
|
LogTrace(receivedResponse, Demod.len, Demod.startTime * 16 - DELAY_AIR2ARM_AS_READER, Demod.endTime * 16 - DELAY_AIR2ARM_AS_READER, NULL, false);
|
|
return true;
|
|
}
|
|
}
|
|
|
|
if (GetTickCountDelta(receive_timer) > timeout + 100) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
*received_len = Demod.len;
|
|
LogTrace(receivedResponse, Demod.len, Demod.startTime * 16 - DELAY_AIR2ARM_AS_READER, Demod.endTime * 16 - DELAY_AIR2ARM_AS_READER, NULL, false);
|
|
return false;
|
|
}
|
|
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Wait a certain time for tag response
|
|
// If a response is captured return TRUE
|
|
// If it takes too long return FALSE
|
|
//-----------------------------------------------------------------------------
|
|
static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint16_t rec_maxlen, uint8_t *receivedResponsePar, uint16_t offset, bool no_parity) {
|
|
if (g_hf_field_active == false) {
|
|
Dbprintf("Warning: HF field is off");
|
|
return false;
|
|
}
|
|
|
|
// Set FPGA mode to "reader listen mode", no modulation (listen
|
|
// only, since we are receiving, not transmitting).
|
|
// Signal field is on with the appropriate LED
|
|
LED_D_ON();
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_LISTEN);
|
|
|
|
// Now get the answer from the card
|
|
Demod14aInit(receivedResponse, rec_maxlen, receivedResponsePar);
|
|
|
|
// clear RXRDY:
|
|
uint8_t b = (uint8_t)FPGA_SSC_RX_Value();
|
|
(void)b;
|
|
|
|
volatile uint32_t c = 0;
|
|
uint32_t timeout = iso14a_get_timeout();
|
|
uint32_t receive_timer = GetTickCount();
|
|
for (;;) {
|
|
WDT_HIT();
|
|
|
|
if (FPGA_SSC_RX_Ready()) {
|
|
b = (uint8_t)FPGA_SSC_RX_Value();
|
|
if (ManchesterDecodingEx(b, offset, 0, no_parity)) {
|
|
NextTransferTime = MAX(NextTransferTime, Demod.endTime - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER) / 16 + FRAME_DELAY_TIME_PICC_TO_PCD);
|
|
return true;
|
|
} else if (c++ > timeout && Demod.state == DEMOD_14A_UNSYNCD) {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
// timeout already in ms + 100ms guard time
|
|
if (GetTickCountDelta(receive_timer) > timeout + 100) {
|
|
break;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void ReaderTransmitBitsPar(const uint8_t *frame, uint16_t bits, uint8_t *par, uint32_t *timing) {
|
|
CodeIso14443aBitsAsReaderPar(frame, bits, par);
|
|
// Send command to tag
|
|
const tosend_t *ts = get_tosend();
|
|
TransmitFor14443a(ts->buf, ts->max, timing);
|
|
if (g_trigger) LED_A_ON();
|
|
|
|
LogTrace(frame, nbytes(bits), (LastTimeProxToAirStart << 4) + DELAY_ARM2AIR_AS_READER, ((LastTimeProxToAirStart + LastProxToAirDuration) << 4) + DELAY_ARM2AIR_AS_READER, par, true);
|
|
}
|
|
|
|
void ReaderTransmitPar(const uint8_t *frame, uint16_t len, uint8_t *par, uint32_t *timing) {
|
|
ReaderTransmitBitsPar(frame, len * 8, par, timing);
|
|
}
|
|
|
|
static void ReaderTransmitBits(const uint8_t *frame, uint16_t len, uint32_t *timing) {
|
|
// Generate parity and redirect
|
|
GetParity(frame, len / 8, parity_array);
|
|
ReaderTransmitBitsPar(frame, len, parity_array, timing);
|
|
}
|
|
|
|
void ReaderTransmit(const uint8_t *frame, uint16_t len, uint32_t *timing) {
|
|
// Generate parity and redirect
|
|
GetParity(frame, len, parity_array);
|
|
ReaderTransmitBitsPar(frame, len * 8, parity_array, timing);
|
|
}
|
|
|
|
static uint16_t ReaderReceiveOffset(uint8_t *receivedAnswer, uint16_t answer_len, uint16_t offset, uint8_t *par) {
|
|
if (GetIso14443aAnswerFromTag(receivedAnswer, answer_len, par, offset, false) == false) {
|
|
return 0;
|
|
}
|
|
LogTrace(receivedAnswer, Demod.len, Demod.startTime * 16 - DELAY_AIR2ARM_AS_READER, Demod.endTime * 16 - DELAY_AIR2ARM_AS_READER, par, false);
|
|
return Demod.len;
|
|
}
|
|
|
|
// End of the last frame we transmitted, and start of the last frame we
|
|
// received, both in SSP clock ticks. Callers that need the tag's frame delay
|
|
// time take the difference; LogTrace scales the same values by 16 to get
|
|
// carrier periods.
|
|
uint32_t iso14a_last_tx_end(void) {
|
|
return LastTimeProxToAirStart + LastProxToAirDuration;
|
|
}
|
|
|
|
uint32_t iso14a_last_rx_start(void) {
|
|
return Demod.startTime;
|
|
}
|
|
|
|
static uint16_t ReaderReceiveEx(uint8_t *receivedAnswer, uint16_t answer_maxlen, uint8_t *par, bool no_parity) {
|
|
if (GetIso14443aAnswerFromTag(receivedAnswer, answer_maxlen, par, 0, no_parity) == false) {
|
|
return 0;
|
|
}
|
|
|
|
LogTrace(receivedAnswer, Demod.len, Demod.startTime * 16 - DELAY_AIR2ARM_AS_READER, Demod.endTime * 16 - DELAY_AIR2ARM_AS_READER, no_parity ? NULL : par, false);
|
|
return Demod.len;
|
|
}
|
|
|
|
uint16_t ReaderReceive(uint8_t *receivedAnswer, uint16_t answer_maxlen, uint8_t *par) {
|
|
return ReaderReceiveEx(receivedAnswer, answer_maxlen, par, false);
|
|
}
|
|
|
|
// Number of symbols in a bit oriented ANTICOLLISION answer that starts `known`
|
|
// bits into the 40 bit UID+BCC of one cascade level. The byte the reader split
|
|
// is completed without a parity bit, every whole byte after it carries one.
|
|
static uint16_t anticoll_answer_symbols(uint8_t known) {
|
|
|
|
uint16_t bits = 40 - known;
|
|
uint16_t split = known & 7;
|
|
uint16_t symbols = 0;
|
|
|
|
if (split) {
|
|
uint16_t first = 8 - split; // completes the split byte, no parity
|
|
symbols += first;
|
|
bits -= first;
|
|
}
|
|
|
|
// whole bytes from here on, one parity bit each
|
|
symbols += bits + (bits / 8);
|
|
return symbols;
|
|
}
|
|
|
|
// Encode the tail of a bit oriented ANTICOLLISION answer: the `40 - known` bits
|
|
// of UID+BCC that the reader has not resolved yet. The byte the reader split is
|
|
// completed without a parity bit, every whole byte after it carries one, so
|
|
// CodeIso14443aAsTagPar() cannot build this - it only speaks whole bytes.
|
|
// known == 0 is the ordinary "send me the whole UID" answer.
|
|
//
|
|
// Every bit from `coll_from` on is sent as a collision instead of as data, and a
|
|
// byte holding one cannot carry a real parity bit either. coll_from == 40 is a
|
|
// clean answer, 0 collides the whole frame.
|
|
static void CodeIso14443aAsTagAnticollTail(const uint8_t *uid, uint8_t known, uint8_t coll_from) {
|
|
|
|
tosend_reset();
|
|
|
|
tosend_t *ts = get_tosend();
|
|
|
|
// 1 correction byte + 1 start bit + 1 stop bit on top of the payload
|
|
if (3 + (int)anticoll_answer_symbols(known) > TOSEND_BUFFER_SIZE) {
|
|
Dbprintf("CodeIso14443aAsTagAnticollTail: frame too large (%u known)", known);
|
|
return;
|
|
}
|
|
|
|
// Correction bit, might be removed when not needed
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(1); // <-----
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
tosend_stuffbit(0);
|
|
|
|
// Send startbit
|
|
ts->buf[++ts->max] = SEC_D;
|
|
LastProxToAirDuration = 8 * ts->max - 4;
|
|
|
|
uint8_t first = known >> 3; // byte the reader stopped in
|
|
uint8_t split = known & 7; // bits of it the reader already has
|
|
|
|
for (uint8_t i = first; i < 5; i++) {
|
|
|
|
uint8_t skip = (i == first) ? split : 0;
|
|
bool collided = false;
|
|
|
|
for (uint8_t j = skip; j < 8; j++) {
|
|
|
|
if (((i * 8) + j) >= coll_from) {
|
|
ts->buf[++ts->max] = SEC_COLL;
|
|
LastProxToAirDuration = 8 * ts->max;
|
|
collided = true;
|
|
} else if (uid[i] & (1 << j)) {
|
|
ts->buf[++ts->max] = SEC_D;
|
|
LastProxToAirDuration = 8 * ts->max - 4;
|
|
} else {
|
|
ts->buf[++ts->max] = SEC_E;
|
|
LastProxToAirDuration = 8 * ts->max;
|
|
}
|
|
}
|
|
|
|
// no parity bit for the byte the reader split
|
|
if (skip) {
|
|
continue;
|
|
}
|
|
|
|
if (collided) {
|
|
ts->buf[++ts->max] = SEC_COLL;
|
|
LastProxToAirDuration = 8 * ts->max;
|
|
} else if (oddparity8(uid[i])) {
|
|
ts->buf[++ts->max] = SEC_D;
|
|
LastProxToAirDuration = 8 * ts->max - 4;
|
|
} else {
|
|
ts->buf[++ts->max] = SEC_E;
|
|
LastProxToAirDuration = 8 * ts->max;
|
|
}
|
|
}
|
|
|
|
// Send stopbit
|
|
ts->buf[++ts->max] = SEC_F;
|
|
|
|
// Convert from last byte pos to length
|
|
ts->max++;
|
|
}
|
|
|
|
// Store whatever CodeIso14443aAsTag*() just built into `buffer` and describe it
|
|
// in `response_info`, the way prepare_allocated_tag_modulation() does for the
|
|
// frames it can encode itself.
|
|
static bool antifuzz_store_modulation(tag_response_info_t *response_info,
|
|
uint8_t **buffer, size_t *max_buffer_size) {
|
|
|
|
const tosend_t *ts = get_tosend();
|
|
if (ts->max <= 0 || (size_t)ts->max > *max_buffer_size) {
|
|
return false;
|
|
}
|
|
|
|
response_info->modulation = *buffer;
|
|
memcpy(response_info->modulation, ts->buf, ts->max);
|
|
response_info->modulation_n = ts->max;
|
|
response_info->ProxToAirDuration = LastProxToAirDuration;
|
|
|
|
*buffer += ts->max;
|
|
*max_buffer_size -= ts->max;
|
|
return true;
|
|
}
|
|
|
|
// Modulate an all-collision answer into `buffer` and describe it in
|
|
// `response_info`, the way prepare_allocated_tag_modulation() does for ordinary
|
|
// frames. CodeIso14443aAsTag() cannot build these: a bit oriented answer is not
|
|
// a whole number of bytes and every symbol in it is a collision.
|
|
// One place to notice a reader getting deeper than it has been in this
|
|
// anticollision attempt. `depth` counts 41 steps per cascade level - the 40 bit
|
|
// counts a reader can claim, plus the SELECT that follows them - so a reader
|
|
// climbing levels keeps making progress rather than restarting the count.
|
|
static void antifuzz_track_depth(uint8_t level, uint8_t known, uint16_t *depth,
|
|
uint8_t *max_level, uint8_t *max_known) {
|
|
|
|
uint16_t step = ((uint16_t)(level - 1) * 41) + known + 1;
|
|
if (step > *depth) {
|
|
*depth = step;
|
|
LED_C_INV();
|
|
}
|
|
|
|
if (level > *max_level) {
|
|
*max_level = level;
|
|
*max_known = known;
|
|
} else if (level == *max_level && known > *max_known) {
|
|
*max_known = known;
|
|
}
|
|
}
|
|
|
|
// Precomputed answers. Modulating a frame takes long enough that the reader's
|
|
// frame delay window is gone before the answer is ready - the same reason
|
|
// `hf 14a sim` builds its answers up front - so everything this loop can send is
|
|
// modulated before the field is even up.
|
|
#define ANTIFUZZ_MAX_LEVEL 7 // SEL 0x93..0x9F
|
|
#define ANTIFUZZ_NVB_COUNT 40 // 0..39 UID bits already known to the reader
|
|
// Collision mode keeps the UID clean up to here and collides everything from it
|
|
// on. Byte 0 is what a reader sanity checks a UID by, so leaving exactly that
|
|
// much alone is what lets the other 24 bits collide without the reader deciding
|
|
// the card is junk and dropping it - every branch of the tree still resolves to
|
|
// a UID starting with a real manufacturer byte. One collided bit costs the
|
|
// reader one round trip, so this is also what sets how hard it has to work.
|
|
#define ANTIFUZZ_COLL_FROM 8
|
|
#define ANTIFUZZ_MAX_ANNOUNCED 3 // cascade levels ISO 14443-3 actually defines
|
|
#define ANTIFUZZ_RESP_ATQA 0
|
|
#define ANTIFUZZ_RESP_SAK 1
|
|
// One block of ANTIFUZZ_NVB_COUNT answers per UID the mode can hand out. Cascade
|
|
// mode has one UID per cascade level; collision mode only needs two, one with a
|
|
// cascade tag and one without, and puts its BCC answers above them. The two
|
|
// layouts overlap - only ever one of them is prepared.
|
|
#define ANTIFUZZ_RESP_BASE 2
|
|
// Collision mode needs a block per announced cascade level plus one of filler,
|
|
// and above them one clean BCC answer per value it could owe a reader. Cascade
|
|
// mode uses a block per level and none of the BCC answers, so the two layouts
|
|
// overlap - only ever one of them is prepared.
|
|
#define ANTIFUZZ_MAX_BLOCKS (ANTIFUZZ_MAX_ANNOUNCED + 1)
|
|
#define ANTIFUZZ_RESP_BCC (ANTIFUZZ_RESP_BASE + (ANTIFUZZ_MAX_BLOCKS * ANTIFUZZ_NVB_COUNT))
|
|
#define ANTIFUZZ_RESP_COUNT (ANTIFUZZ_RESP_BCC + 256 > ANTIFUZZ_RESP_BASE + (ANTIFUZZ_MAX_LEVEL * ANTIFUZZ_NVB_COUNT) \
|
|
? ANTIFUZZ_RESP_BCC + 256 \
|
|
: ANTIFUZZ_RESP_BASE + (ANTIFUZZ_MAX_LEVEL * ANTIFUZZ_NVB_COUNT))
|
|
// worst case is cascade mode: 1025 bytes of modulation per cascade level, plus
|
|
// the two fixed answers
|
|
#define ANTIFUZZ_MOD_SIZE ((ANTIFUZZ_MAX_LEVEL * 1025) + 128)
|
|
|
|
// The UIDs `hf 14a antifuzz` hands out, one per ATQA size. A reader collects
|
|
// them three bytes at a time behind a cascade tag, until the last cascade level
|
|
// its ATQA announced, which carries four.
|
|
static const uint8_t antifuzz_uid_4b[4] = { 0x9B, 0x49, 0x03, 0x51 };
|
|
static const uint8_t antifuzz_uid_7b[7] = { 0x04, 0x49, 0x03, 0x52, 0x92, 0x9C, 0x80 };
|
|
static const uint8_t antifuzz_uid_10b[10] = { 0x04, 0x49, 0x03, 0x53, 0x92, 0x9C, 0xAB, 0xD1, 0x4F, 0x80 };
|
|
|
|
// Block b answers for cascade level b + 1, and the last block also answers for
|
|
// every level past it.
|
|
static uint8_t antifuzz_block_of(uint8_t count, uint8_t level) {
|
|
return (level <= count) ? (level - 1) : (count - 1);
|
|
}
|
|
|
|
// The four UID bytes a cascade level hands out, with its BCC appended. Levels
|
|
// below the last announced one carry a cascade tag and three UID bytes, the last
|
|
// announced level carries four, and anything past it is off the end of the UID
|
|
// altogether - it is only ever reached because the SAK keeps claiming the UID is
|
|
// incomplete, so it gets filler that is obviously not part of the card.
|
|
static void antifuzz_level_uid(uint8_t *uid, uint8_t level, uint8_t announced_levels, const uint8_t *src) {
|
|
|
|
if (level > announced_levels) {
|
|
// 0x88 would read as one more cascade tag and 0x08 as a random ID
|
|
uid[0] = 0x11;
|
|
uid[1] = level;
|
|
uid[2] = 0x01;
|
|
uid[3] = 0x00;
|
|
} else if (level < announced_levels) {
|
|
uid[0] = MIFARE_SELECT_CT;
|
|
memcpy(uid + 1, src + (3 * (level - 1)), 3);
|
|
} else {
|
|
memcpy(uid, src + (3 * (level - 1)), 4);
|
|
}
|
|
|
|
uid[4] = uid[0] ^ uid[1] ^ uid[2] ^ uid[3];
|
|
}
|
|
|
|
// This function misstreats the ISO 14443a anticollision procedure.
|
|
//
|
|
// ANTIFUZZ_MODE_CASCADE
|
|
// Every SAK keeps the cascade bit set, i.e. "the UID is not complete yet", so
|
|
// a reader that believes the card asks for one more cascade level and keeps
|
|
// growing its UID buffer past the three levels ISO 14443-3 defines. We answer
|
|
// SEL bytes 0x93 up to 0x9F, so a reader that simply increments is followed
|
|
// all the way up.
|
|
//
|
|
// The UID matters only in that the reader has to accept it: a conforming
|
|
// reader counts the cascade levels the ATQA promised and throws the card away
|
|
// if it meets a cascade tag in the last of them, so the cascade tag is sent
|
|
// only below that level.
|
|
//
|
|
// ANTIFUZZ_MODE_COLLISION
|
|
// Byte 0 of the UID goes out clean and every bit after it collides, so the
|
|
// reader has to resolve 24 bits one round trip at a time. Whatever it picks
|
|
// along the way it tells us, which means that once it has all 32 bits the BCC
|
|
// it is owed is computable - so it gets a real one, its SELECT succeeds, and
|
|
// the SAK sends it round the same 26 frame exercise one cascade level up.
|
|
//
|
|
// Colliding byte 0 as well only ever produced a UID of all ones, which readers
|
|
// recognise as junk and drop before they even ask for the BCC. Leaving that
|
|
// one byte alone is what buys the other 24 bits: every branch of the tree
|
|
// still resolves to a UID starting with a real manufacturer byte, so there is
|
|
// never a reason to bail out early.
|
|
//
|
|
// Between them that is 183 answers per poll against the 3 a real card needs,
|
|
// and it leans on the bit tree walker, the NVB parser, the partial byte
|
|
// reassembler and the cascade handler all at once.
|
|
void iso14443a_antifuzz(uint32_t flags, uint8_t mode) {
|
|
|
|
// We need to listen to the high-frequency, peak-detected path.
|
|
iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
BigBuf_free_keep_EM();
|
|
clear_trace();
|
|
set_tracing(true);
|
|
|
|
int len = 0;
|
|
|
|
// allocate buffers:
|
|
uint8_t *received = BigBuf_calloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedPar = BigBuf_calloc(MAX_PARITY_SIZE);
|
|
tag_response_info_t *responses = (tag_response_info_t *)BigBuf_calloc(ANTIFUZZ_RESP_COUNT * sizeof(tag_response_info_t));
|
|
uint8_t *respdata = BigBuf_calloc(64);
|
|
uint8_t *modulation = BigBuf_calloc(ANTIFUZZ_MOD_SIZE);
|
|
// one byte per possible BCC, so each precomputed answer has something stable
|
|
// to point its trace payload at
|
|
uint8_t *bcc_bytes = (mode == ANTIFUZZ_MODE_COLLISION) ? BigBuf_calloc(256) : respdata;
|
|
if (received == NULL || receivedPar == NULL || responses == NULL || respdata == NULL ||
|
|
modulation == NULL || bcc_bytes == NULL) {
|
|
if (g_dbglevel >= DBG_ERROR) DbpString("Anti-fuzz: failed to allocate buffers");
|
|
reply_ng(CMD_HF_ISO14443A_ANTIFUZZ, PM3_EMALLOC, NULL, 0);
|
|
switch_off();
|
|
BigBuf_free_keep_EM();
|
|
return;
|
|
}
|
|
|
|
// ATQA, bit 7..6 of the first byte announce the UID size, and that size is
|
|
// also how many cascade levels the reader expects to walk before the UID is
|
|
// complete: 1 for a 4 byte UID, 2 for 7 bytes, 3 for 10 bytes.
|
|
uint8_t atqa0 = 0x04;
|
|
uint8_t announced_levels = 1;
|
|
const uint8_t *uid_src = antifuzz_uid_4b;
|
|
if (IS_FLAG_UID_IN_DATA(flags, 7)) {
|
|
atqa0 = 0x44;
|
|
announced_levels = 2;
|
|
uid_src = antifuzz_uid_7b;
|
|
} else if (IS_FLAG_UID_IN_DATA(flags, 10)) {
|
|
atqa0 = 0x84;
|
|
announced_levels = 3;
|
|
uid_src = antifuzz_uid_10b;
|
|
}
|
|
|
|
uint8_t *free_buffer = modulation;
|
|
size_t free_size = ANTIFUZZ_MOD_SIZE;
|
|
uint8_t *d = respdata;
|
|
bool ok = true;
|
|
|
|
responses[ANTIFUZZ_RESP_ATQA].response = d;
|
|
responses[ANTIFUZZ_RESP_ATQA].response_n = 2;
|
|
d[0] = atqa0;
|
|
d[1] = 0x00;
|
|
d += 2;
|
|
|
|
// SAK with the cascade bit set - this, not the UID, is what keeps the reader
|
|
// asking for one more level
|
|
responses[ANTIFUZZ_RESP_SAK].response = d;
|
|
responses[ANTIFUZZ_RESP_SAK].response_n = 3;
|
|
d[0] = 0x04;
|
|
AddCrc14A(d, 1);
|
|
d += 3;
|
|
|
|
ok = prepare_allocated_tag_modulation(&responses[ANTIFUZZ_RESP_ATQA], &free_buffer, &free_size) &&
|
|
prepare_allocated_tag_modulation(&responses[ANTIFUZZ_RESP_SAK], &free_buffer, &free_size);
|
|
|
|
// Cascade mode walks a reader past every level ISO 14443-3 defines, so it
|
|
// needs an answer for each. Collision mode makes the reader earn each level,
|
|
// and only needs the announced ones plus a block of filler beyond them.
|
|
uint8_t nblocks = (mode == ANTIFUZZ_MODE_COLLISION) ? (announced_levels + 1) : ANTIFUZZ_MAX_LEVEL;
|
|
uint8_t coll_from = (mode == ANTIFUZZ_MODE_COLLISION) ? ANTIFUZZ_COLL_FROM : ANTIFUZZ_NVB_COUNT;
|
|
|
|
for (uint8_t b = 0; ok && b < nblocks; b++) {
|
|
|
|
uint8_t *uid = d;
|
|
d += 5;
|
|
antifuzz_level_uid(uid, b + 1, announced_levels, uid_src);
|
|
|
|
// One answer per NVB the reader can ask with. Cascade mode never
|
|
// collides, so a conforming reader only ever asks with NVB 0x20 there,
|
|
// but answering a bit oriented request with the whole UID hands it a
|
|
// frame of the wrong length and it drops the card.
|
|
for (uint8_t known = 0; ok && known < ANTIFUZZ_NVB_COUNT; known++) {
|
|
tag_response_info_t *ri = &responses[ANTIFUZZ_RESP_BASE + (b * ANTIFUZZ_NVB_COUNT) + known];
|
|
ri->response = uid + (known >> 3);
|
|
ri->response_n = 5 - (known >> 3);
|
|
CodeIso14443aAsTagAnticollTail(uid, known, coll_from);
|
|
ok = antifuzz_store_modulation(ri, &free_buffer, &free_size);
|
|
}
|
|
}
|
|
|
|
if (mode == ANTIFUZZ_MODE_COLLISION) {
|
|
|
|
// The one answer in this mode that does not collide. By the time the
|
|
// reader asks with all 32 UID bits it has told us every one it settled
|
|
// on, so the BCC it is owed is just those four bytes XORed - whichever
|
|
// way it came down the tree. All 256 are ready, and none of them cares
|
|
// which cascade level or which UID it is answering for.
|
|
for (uint16_t b = 0; ok && b < 256; b++) {
|
|
tag_response_info_t *ri = &responses[ANTIFUZZ_RESP_BCC + b];
|
|
bcc_bytes[b] = (uint8_t)b;
|
|
ri->response = &bcc_bytes[b];
|
|
ri->response_n = 1;
|
|
ok = prepare_allocated_tag_modulation(ri, &free_buffer, &free_size);
|
|
}
|
|
}
|
|
|
|
if (ok == false) {
|
|
if (g_dbglevel >= DBG_ERROR) DbpString("Anti-fuzz: failed to prepare tag answers");
|
|
reply_ng(CMD_HF_ISO14443A_ANTIFUZZ, PM3_EMALLOC, NULL, 0);
|
|
switch_off();
|
|
BigBuf_free_keep_EM();
|
|
return;
|
|
}
|
|
|
|
uint8_t max_level = 0; // deepest cascade level a reader was driven to
|
|
uint8_t max_known = 0; // and the most UID bits it claimed at that level
|
|
uint16_t rounds = 0; // anticollision attempts it started
|
|
uint16_t depth = 0; // how far into the current attempt it has got
|
|
|
|
// LED A lit for the whole run
|
|
// LED B lit while an anticollision attempt is in progress, dark once the
|
|
// reader has given up on it and gone back to polling
|
|
// LED C flips every time the reader gets one step deeper than it has been
|
|
// in this attempt, so a fast flicker is a reader walking the UID tree
|
|
// LED D flips on every frame we answer
|
|
LED_A_ON();
|
|
LED_B_OFF();
|
|
LED_C_OFF();
|
|
|
|
for (;;) {
|
|
WDT_HIT();
|
|
|
|
// Clean receive command buffer
|
|
if (GetIso14443aCommandFromReader(received, MAX_FRAME_SIZE, receivedPar, &len) == false) {
|
|
Dbprintf("Anti-fuzz stopped. " _YELLOW_("%u") " anticollision rounds, deepest was cascade level "
|
|
_YELLOW_("%u") " at " _YELLOW_("%u") " UID bits, trace length " _YELLOW_("%d"),
|
|
rounds, max_level, max_known, BigBuf_get_traceLen());
|
|
break;
|
|
}
|
|
|
|
if (len == 1 && (received[0] == ISO14443A_CMD_WUPA || received[0] == ISO14443A_CMD_REQA)) {
|
|
// polling from scratch, so whatever the reader had collected is gone
|
|
LED_B_OFF();
|
|
depth = 0;
|
|
EmSendPrecompiledCmd(&responses[ANTIFUZZ_RESP_ATQA]);
|
|
LED_D_INV();
|
|
continue;
|
|
}
|
|
|
|
// Everything below is a SEL frame. ISO 14443-3 only defines cascade
|
|
// levels 1..3 (0x93 / 0x95 / 0x97), the levels above them are the whole
|
|
// point of the exercise.
|
|
if (len < 2 || received[0] < ISO14443A_CMD_ANTICOLL_OR_SELECT ||
|
|
received[0] > 0x9F || (received[0] & 1) == 0) {
|
|
// a frame we do not answer is never traced by EmLogTrace, and a
|
|
// reader that walked off somewhere unexpected is exactly what this
|
|
// command is looking for, so log it here
|
|
LogTrace(received, len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
if (g_dbglevel >= DBG_EXTENDED) Dbprintf("unknown command %02x (len %d)", received[0], len);
|
|
continue;
|
|
}
|
|
|
|
uint8_t level = ((received[0] - ISO14443A_CMD_ANTICOLL_OR_SELECT) >> 1) + 1;
|
|
if (level > max_level && g_dbglevel >= DBG_INFO) {
|
|
Dbprintf("cascade level " _YELLOW_("%u") " (SEL %02x)", level, received[0]);
|
|
}
|
|
|
|
if (depth == 0) {
|
|
rounds++;
|
|
LED_B_ON();
|
|
}
|
|
|
|
// worked out once, before the frame delay this has to answer inside
|
|
uint16_t block = ANTIFUZZ_RESP_BASE + (antifuzz_block_of(nblocks, level) * ANTIFUZZ_NVB_COUNT);
|
|
|
|
uint8_t nvb = received[1];
|
|
|
|
// SELECT: SEL 70 uid0 uid1 uid2 uid3 bcc crc crc. The reader claims all
|
|
// 40 bits here, which is as deep as a cascade level goes.
|
|
if (nvb == 0x70) {
|
|
antifuzz_track_depth(level, 40, &depth, &max_level, &max_known);
|
|
EmSendPrecompiledCmd(&responses[ANTIFUZZ_RESP_SAK]);
|
|
LED_D_INV();
|
|
continue;
|
|
}
|
|
|
|
// ANTICOLLISION. NVB counts SEL and NVB themselves, so 0x20 means "no
|
|
// UID bits known" and 0x67 means "39 bits known".
|
|
if (nvb < 0x20 || nvb > 0x67 || (nvb & 0x0F) > 7) {
|
|
LogTrace(received, len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
if (g_dbglevel >= DBG_EXTENDED) Dbprintf("bad NVB %02x (SEL %02x)", nvb, received[0]);
|
|
continue;
|
|
}
|
|
|
|
uint8_t known = (uint8_t)((((nvb >> 4) - 2) * 8) + (nvb & 0x0F));
|
|
antifuzz_track_depth(level, known, &depth, &max_level, &max_known);
|
|
|
|
// SEL 60 u0 u1 u2 u3 - the reader has resolved the whole UID and wants the
|
|
// BCC for it. Give it the real one: its SELECT then succeeds, and the
|
|
// SAK cascades it into the same exercise one level deeper.
|
|
if (mode == ANTIFUZZ_MODE_COLLISION && known == 32 && len >= 6) {
|
|
uint8_t bcc = received[2] ^ received[3] ^ received[4] ^ received[5];
|
|
EmSendPrecompiledCmd(&responses[ANTIFUZZ_RESP_BCC + bcc]);
|
|
LED_D_INV();
|
|
continue;
|
|
}
|
|
|
|
EmSendPrecompiledCmd(&responses[block + known]);
|
|
LED_D_INV();
|
|
}
|
|
|
|
reply_ng(CMD_HF_ISO14443A_ANTIFUZZ, PM3_SUCCESS, NULL, 0);
|
|
switch_off();
|
|
BigBuf_free_keep_EM();
|
|
}
|
|
|
|
static void iso14a_set_ATS_times(const uint8_t *ats) {
|
|
|
|
if (ats[0] > 1) { // there is a format byte T0
|
|
if ((ats[1] & 0x20) == 0x20) { // there is an interface byte TB(1)
|
|
uint8_t tb1;
|
|
if ((ats[1] & 0x10) == 0x10) { // there is an interface byte TA(1) preceding TB(1)
|
|
tb1 = ats[3];
|
|
} else {
|
|
tb1 = ats[2];
|
|
}
|
|
uint8_t fwi = (tb1 & 0xf0) >> 4; // frame waiting time integer (FWI)
|
|
if (fwi != 15) {
|
|
uint32_t fwt = 256 * 16 * (1 << fwi); // frame waiting time (FWT) in 1/fc
|
|
iso14a_set_timeout(fwt / (8 * 16));
|
|
}
|
|
uint8_t sfgi = tb1 & 0x0f; // startup frame guard time integer (SFGI)
|
|
if (sfgi != 0 && sfgi != 15) {
|
|
uint32_t sfgt = 256 * 16 * (1 << sfgi); // startup frame guard time (SFGT) in 1/fc
|
|
NextTransferTime = MAX(NextTransferTime, Demod.endTime + (sfgt - DELAY_AIR2ARM_AS_READER - DELAY_ARM2AIR_AS_READER) / 16);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
int GetATQA(uint8_t *resp, uint16_t resp_len, uint8_t *resp_par, const iso14a_polling_parameters_t *polling_parameters) {
|
|
#define RETRY_TIMEOUT 10
|
|
|
|
uint32_t save_iso14a_timeout = iso14a_get_timeout();
|
|
iso14a_set_timeout(1236 / 128 + 1); // response to WUPA is expected at exactly 1236/fc. No need to wait longer.
|
|
|
|
// refactored to use local pointer, now no modification of polling_parameters pointer is done
|
|
// I don't think the intention was to modify polling_parameters when sending in WUPA_POLLING_PARAMETERS etc.
|
|
// Modify polling_params, if null use default values.
|
|
iso14a_polling_parameters_t p;
|
|
memcpy(&p, (uint8_t *)polling_parameters, sizeof(iso14a_polling_parameters_t));
|
|
|
|
if (polling_parameters == NULL) {
|
|
memcpy(&p, (uint8_t *)&hf14a_polling_parameters, sizeof(iso14a_polling_parameters_t));
|
|
}
|
|
|
|
bool first_try = true;
|
|
int len;
|
|
uint32_t retry_timeout = ((RETRY_TIMEOUT * p.frame_count) + p.extra_timeout);
|
|
uint32_t start_time = 0;
|
|
uint8_t curr = 0;
|
|
|
|
// Use the temporary polling parameters
|
|
do {
|
|
const iso14a_polling_frame_t *frp = &p.frames[curr];
|
|
|
|
if (frp->last_byte_bits == 8) {
|
|
ReaderTransmit(frp->frame, frp->frame_length, NULL);
|
|
} else {
|
|
ReaderTransmitBitsPar(frp->frame, frp->last_byte_bits, NULL, NULL);
|
|
}
|
|
|
|
if (frp->extra_delay) {
|
|
SpinDelay(frp->extra_delay);
|
|
}
|
|
|
|
// Receive the ATQA
|
|
len = ReaderReceive(resp, resp_len, resp_par);
|
|
|
|
// DXL: Check response length is not 2 and no collision, set len to 0 for skip this data
|
|
if (len != 2 && !Demod.collisionPos) {
|
|
len = 0; // maybe an incorrect data, discard it.
|
|
}
|
|
|
|
// We set the start_time here otherwise in some cases we miss the window and only ever try once
|
|
if (first_try) {
|
|
start_time = GetTickCount();
|
|
first_try = false;
|
|
}
|
|
|
|
// Go over frame configurations, loop back when we reach the end
|
|
curr = (curr < (p.frame_count - 1)) ? curr + 1 : 0;
|
|
|
|
} while (len == 0 && GetTickCountDelta(start_time) <= retry_timeout);
|
|
|
|
iso14a_set_timeout(save_iso14a_timeout);
|
|
return len;
|
|
}
|
|
|
|
|
|
int iso14443a_select_card(uint8_t *uid_ptr, iso14a_card_select_t *p_card, uint32_t *cuid_ptr, bool anticollision, uint8_t num_cascades, bool no_rats) {
|
|
return iso14443a_select_cardEx(uid_ptr, p_card, cuid_ptr, anticollision, num_cascades, no_rats, NULL, false);
|
|
}
|
|
int iso14443a_select_card_for_magic(uint8_t *uid_ptr, iso14a_card_select_t *p_card, uint32_t *cuid_ptr, bool anticollision, uint8_t num_cascades) {
|
|
// Bug fix: When SAK is 0x00, `iso14443a_select_cardEx` would return too early at
|
|
// line "if (hf14aconfig.forcerats == 0)".`force_rats` is used to force RATS execution and ATS retrieval.
|
|
return iso14443a_select_cardEx(uid_ptr, p_card, cuid_ptr, anticollision, num_cascades, false, NULL, true);
|
|
}
|
|
|
|
// performs iso14443a anticollision (optional) and card select procedure
|
|
// fills the uid and cuid pointer unless NULL
|
|
// fills the card info record unless NULL
|
|
// if anticollision is false, then the UID must be provided in uid_ptr[]
|
|
// and num_cascades must be set (1: 4 Byte UID, 2: 7 Byte UID, 3: 10 Byte UID)
|
|
// requests ATS unless no_rats is true
|
|
int iso14443a_select_cardEx(uint8_t *uid_ptr, iso14a_card_select_t *p_card, uint32_t *cuid_ptr,
|
|
bool anticollision, uint8_t num_cascades, bool no_rats,
|
|
const iso14a_polling_parameters_t *polling_parameters, bool force_rats) {
|
|
|
|
uint8_t resp[MAX_FRAME_SIZE] = {0}; // theoretically. A usual RATS will be much smaller
|
|
|
|
uint8_t sak = 0; // cascade uid
|
|
bool do_cascade = 1;
|
|
int cascade_level = 0;
|
|
|
|
if (p_card) {
|
|
p_card->uidlen = 0;
|
|
memset(p_card->uid, 0, 10);
|
|
p_card->ats_len = 0;
|
|
}
|
|
|
|
/*
|
|
* DXL:
|
|
* If the specifications of manual 14443-3 are strictly followed, ATQA should also participate in the anti-collision process.
|
|
* When encountering conflicts, it should directly enter the card selection stage of anti-collision.
|
|
* However, at present, all operations rely on the first ATQA request and do not follow ATQA's anti-collision standards.
|
|
* ---
|
|
* After testing, in some cases, the device may decode an incorrect/collision ATQA,
|
|
* and using this ATQA data for subsequent logical operations may result in unexpected things.
|
|
* Note: It is easier to reproduce this problem when placing the card from high to low for card reading.
|
|
* Invalid AQTA infos: length = 1, data = 0000, collision = 0
|
|
* ---
|
|
* Therefore, I think the best solution is to consider ATQA invalid if there are no conflicts and the data length of ATQA is less than two bytes.
|
|
* In order to improve the stability of card reading as much as possible,
|
|
* I implemented this logic inside the GetATQA function.
|
|
*/
|
|
if (GetATQA(resp, sizeof(resp), parity_array, polling_parameters) == 0) {
|
|
return 0;
|
|
}
|
|
|
|
if (p_card) {
|
|
p_card->atqa[0] = resp[0];
|
|
p_card->atqa[1] = resp[1];
|
|
}
|
|
|
|
// 11RF005SH or 11RF005M, Read UID again
|
|
if (p_card && p_card->atqa[1] == 0x00) {
|
|
|
|
if ((p_card->atqa[0] == 0x03) || (p_card->atqa[0] == 0x05)) {
|
|
|
|
// Read real UID
|
|
uint8_t fudan_read[] = { 0x30, 0x01, 0x8B, 0xB9};
|
|
ReaderTransmit(fudan_read, sizeof(fudan_read), NULL);
|
|
if (ReaderReceive(resp, sizeof(resp), parity_array) == 0) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Card didn't answer to select all");
|
|
return 0;
|
|
}
|
|
|
|
memcpy(p_card->uid, resp, 4);
|
|
|
|
// select again?
|
|
if (GetATQA(resp, sizeof(resp), parity_array, &WUPA_POLLING_PARAMETERS) == 0) {
|
|
return 0;
|
|
}
|
|
|
|
if (GetATQA(resp, sizeof(resp), parity_array, &WUPA_POLLING_PARAMETERS) == 0) {
|
|
return 0;
|
|
}
|
|
|
|
p_card->sak = 0x0A;
|
|
p_card->uidlen = 4;
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
if (anticollision) {
|
|
// clear uid
|
|
if (uid_ptr) {
|
|
memset(uid_ptr, 0, 10);
|
|
}
|
|
}
|
|
|
|
if (hf14aconfig.forceanticol == 0) {
|
|
// check for proprietary anticollision:
|
|
if ((resp[0] & 0x1F) == 0) {
|
|
return 3;
|
|
}
|
|
|
|
} else if (hf14aconfig.forceanticol == 2) {
|
|
return 3; // force skipping anticol
|
|
} // else force executing
|
|
|
|
// OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
|
|
// which case we need to make a cascade 2 request and select - this is a long UID
|
|
// While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
|
|
for (; do_cascade; cascade_level++) {
|
|
// SELECT_* (L1: 0x93, L2: 0x95, L3: 0x97)
|
|
uint8_t sel_all[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT, 0x20 };
|
|
uint8_t sel_uid[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
|
uint8_t uid_resp[5] = {0}; // UID + original BCC
|
|
sel_uid[0] = sel_all[0] = 0x93 + cascade_level * 2;
|
|
|
|
if (anticollision) {
|
|
|
|
// SELECT_ALL
|
|
ReaderTransmit(sel_all, sizeof(sel_all), NULL);
|
|
if (ReaderReceive(resp, sizeof(resp), parity_array) == 0) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Card didn't answer to CL%i select all", cascade_level + 1);
|
|
return 0;
|
|
}
|
|
|
|
if (Demod.collisionPos) { // we had a collision and need to construct the UID bit by bit
|
|
memset(uid_resp, 0, 5);
|
|
uint16_t uid_resp_bits = 0;
|
|
uint16_t collision_answer_offset = 0;
|
|
|
|
// anti-collision-loop:
|
|
while (Demod.collisionPos) {
|
|
Dbprintf("Multiple tags detected. Collision after Bit %d", Demod.collisionPos);
|
|
|
|
for (uint16_t i = collision_answer_offset; i < Demod.collisionPos; i++, uid_resp_bits++) { // add valid UID bits before collision point
|
|
uint16_t UIDbit = (resp[i / 8] >> (i % 8)) & 0x01;
|
|
uid_resp[uid_resp_bits / 8] |= UIDbit << (uid_resp_bits % 8);
|
|
}
|
|
|
|
uid_resp[uid_resp_bits / 8] |= 1 << (uid_resp_bits % 8); // next time select the card(s) with a 1 in the collision position
|
|
uid_resp_bits++;
|
|
// construct anticollision command:
|
|
sel_uid[1] = ((2 + uid_resp_bits / 8) << 4) | (uid_resp_bits & 0x07); // length of data in bytes and bits
|
|
for (uint16_t i = 0; i <= uid_resp_bits / 8; i++) {
|
|
sel_uid[2 + i] = uid_resp[i];
|
|
}
|
|
|
|
collision_answer_offset = uid_resp_bits % 8;
|
|
|
|
ReaderTransmitBits(sel_uid, 16 + uid_resp_bits, NULL);
|
|
if (ReaderReceiveOffset(resp, sizeof(resp), collision_answer_offset, parity_array) == 0) {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
// finally, add the last bits and BCC of the UID
|
|
for (uint32_t i = collision_answer_offset; i < Demod.len * 8; i++, uid_resp_bits++) {
|
|
uint16_t UIDbit = (resp[i / 8] >> (i % 8)) & 0x01;
|
|
uid_resp[uid_resp_bits / 8] |= UIDbit << (uid_resp_bits % 8);
|
|
}
|
|
|
|
} else { // no collision, use the response to SELECT_ALL as current uid
|
|
memcpy(uid_resp, resp, 5); // UID + original BCC
|
|
}
|
|
|
|
} else {
|
|
if (cascade_level < num_cascades - 1) {
|
|
uid_resp[0] = MIFARE_SELECT_CT;
|
|
memcpy(uid_resp + 1, uid_ptr + cascade_level * 3, 3);
|
|
} else {
|
|
memcpy(uid_resp, uid_ptr + cascade_level * 3, 4);
|
|
}
|
|
}
|
|
size_t uid_resp_len = 4;
|
|
|
|
// calculate crypto UID. Always use last 4 Bytes.
|
|
if (cuid_ptr)
|
|
*cuid_ptr = bytes_to_num(uid_resp, 4);
|
|
|
|
// Construct SELECT UID command
|
|
sel_uid[1] = 0x70; // transmitting a full UID (1 Byte cmd, 1 Byte NVB, 4 Byte UID, 1 Byte BCC, 2 Bytes CRC)
|
|
|
|
if (anticollision) {
|
|
|
|
memcpy(sel_uid + 2, uid_resp, 5); // the UID received during anticollision with original BCC
|
|
uint8_t bcc = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate BCC
|
|
if (sel_uid[6] != bcc) {
|
|
|
|
Dbprintf("BCC%d incorrect, got 0x%02x, expected 0x%02x", cascade_level, sel_uid[6], bcc);
|
|
|
|
if (hf14aconfig.forcebcc == 0) {
|
|
Dbprintf("Aborting");
|
|
return 0;
|
|
} else if (hf14aconfig.forcebcc == 1) {
|
|
sel_uid[6] = bcc;
|
|
} // else use card BCC
|
|
|
|
Dbprintf("Using BCC%d =" _YELLOW_("0x%02x"), cascade_level, sel_uid[6]);
|
|
}
|
|
} else {
|
|
memcpy(sel_uid + 2, uid_resp, 4); // the provided UID
|
|
sel_uid[6] = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate and add BCC
|
|
}
|
|
|
|
AddCrc14A(sel_uid, 7); // calculate and add CRC
|
|
ReaderTransmit(sel_uid, sizeof(sel_uid), NULL);
|
|
|
|
// Receive the SAK
|
|
if (ReaderReceive(resp, sizeof(resp), parity_array) == 0) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Card didn't answer to select");
|
|
return 0;
|
|
}
|
|
sak = resp[0];
|
|
|
|
// Test if more parts of the uid are coming
|
|
do_cascade = (((sak & 0x04) /* && uid_resp[0] == MIFARE_SELECT_CT */) > 0);
|
|
|
|
if (cascade_level == 0) {
|
|
|
|
if (hf14aconfig.forcecl2 == 2) {
|
|
do_cascade = false;
|
|
} else if (hf14aconfig.forcecl2 == 1) {
|
|
do_cascade = true;
|
|
} // else 0==auto
|
|
} else if (cascade_level == 1) {
|
|
|
|
if (hf14aconfig.forcecl3 == 2) {
|
|
do_cascade = false;
|
|
} else if (hf14aconfig.forcecl3 == 1) {
|
|
do_cascade = true;
|
|
} // else 0==auto
|
|
}
|
|
if (do_cascade) {
|
|
// Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of:
|
|
// http://www.nxp.com/documents/application_note/AN10927.pdf
|
|
uid_resp[0] = uid_resp[1];
|
|
uid_resp[1] = uid_resp[2];
|
|
uid_resp[2] = uid_resp[3];
|
|
uid_resp_len = 3;
|
|
}
|
|
|
|
if (uid_ptr && anticollision)
|
|
memcpy(uid_ptr + (cascade_level * 3), uid_resp, uid_resp_len);
|
|
|
|
if (p_card) {
|
|
memcpy(p_card->uid + (cascade_level * 3), uid_resp, uid_resp_len);
|
|
p_card->uidlen += uid_resp_len;
|
|
}
|
|
}
|
|
|
|
if (p_card) {
|
|
p_card->sak = sak;
|
|
}
|
|
|
|
if (hf14aconfig.forcerats == 0 && force_rats == false) {
|
|
// PICC compliant with iso14443a-4 ---> (SAK & 0x20 != 0)
|
|
if ((sak & 0x20) == 0) {
|
|
return 2;
|
|
}
|
|
|
|
} else if (hf14aconfig.forcerats == 2 && force_rats == false) {
|
|
if ((sak & 0x20) != 0) Dbprintf("Skipping RATS according to hf 14a config");
|
|
return 2;
|
|
} // else force RATS
|
|
|
|
if ((sak & 0x20) == 0 && force_rats == false) Dbprintf("Forcing RATS according to hf 14a config");
|
|
|
|
// RATS, Request for answer to select
|
|
if (no_rats == false) {
|
|
|
|
uint8_t rats[] = { ISO14443A_CMD_RATS, 0x80, 0x31, 0x73 }; // FSD=256, FSDI=8, CID=0
|
|
ReaderTransmit(rats, sizeof(rats), NULL);
|
|
int len = ReaderReceive(resp, sizeof(resp), parity_array);
|
|
if (len == 0) {
|
|
return 0;
|
|
}
|
|
|
|
// An ATS is TL, the bytes TL counts, and two CRC bytes on top.
|
|
// Anything shorter, like a 4 bit NAK is not ATS
|
|
if (len < 3 || resp[0] != len - 2) {
|
|
if (g_dbglevel >= DBG_INFO) {
|
|
Dbprintf("Card answered RATS with %i byte(s), not an ATS. Staying at ISO14443-3", len);
|
|
}
|
|
return 2;
|
|
}
|
|
|
|
if (p_card) {
|
|
memcpy(p_card->ats, resp, sizeof(p_card->ats));
|
|
p_card->ats_len = len;
|
|
}
|
|
|
|
// reset the PCB block number
|
|
iso14_pcb_blocknum = 0;
|
|
|
|
// set default timeout and delay next transfer based on ATS
|
|
iso14a_set_ATS_times(resp);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
int iso14443a_fast_select_card(const uint8_t *uid_ptr, uint8_t num_cascades) {
|
|
uint8_t resp[3] = { 0 }; // theoretically. max 1 Byte SAK, 2 Byte CRC, 3 bytes is enough
|
|
uint8_t resp_par[1] = {0};
|
|
|
|
uint8_t sak = 0x04; // cascade uid
|
|
int cascade_level = 1;
|
|
|
|
if (GetATQA(resp, sizeof(resp), resp_par, NULL) == 0) {
|
|
return 0;
|
|
}
|
|
|
|
// OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
|
|
// which case we need to make a cascade 2 request and select - this is a long UID
|
|
// While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
|
|
for (; sak & 0x04; cascade_level++) {
|
|
// transmitting a full UID (1 Byte cmd, 1 Byte NVB, 4 Byte UID, 1 Byte BCC, 2 Bytes CRC)
|
|
uint8_t sel_uid[9] = { ISO14443A_CMD_ANTICOLL_OR_SELECT, 0x70 };
|
|
|
|
// Construct SELECT UID command
|
|
// SELECT_* (L1: 0x93, L2: 0x95, L3: 0x97)
|
|
sel_uid[0] = ISO14443A_CMD_ANTICOLL_OR_SELECT + (cascade_level - 1) * 2;
|
|
|
|
// CT + UID
|
|
if (cascade_level < num_cascades) {
|
|
sel_uid[2] = MIFARE_SELECT_CT;
|
|
memcpy(&sel_uid[3], uid_ptr + (cascade_level - 1) * 3, 3);
|
|
} else {
|
|
memcpy(&sel_uid[2], uid_ptr + (cascade_level - 1) * 3, 4);
|
|
}
|
|
|
|
sel_uid[6] = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate and add BCC
|
|
AddCrc14A(sel_uid, 7); // calculate and add CRC
|
|
ReaderTransmit(sel_uid, sizeof(sel_uid), NULL);
|
|
|
|
// Receive 1 Byte SAK, 2 Byte CRC
|
|
if (ReaderReceive(resp, sizeof(resp), resp_par) != 3) {
|
|
return 0;
|
|
}
|
|
|
|
sak = resp[0];
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
void iso14443a_setup(uint8_t fpga_minor_mode) {
|
|
set_session_channel(false);
|
|
|
|
// keep_EM: a bitstream download frees and clears BigBuf to get scratch space
|
|
// for the decompressor, and the plain FpgaDownloadAndGo() takes the emulator
|
|
// memory with it. Every 14a command comes through here, so a card image that
|
|
// `eload` had just put in place was destroyed by the next `hf 14a` command
|
|
// whenever the HF bitstream was not already resident. The decompressor still
|
|
// has BigBuf below the emulator memory to work in.
|
|
FpgaDownloadAndGo_keep_EM(FPGA_BITSTREAM_HF);
|
|
// Set up the synchronous serial port
|
|
FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO14443A);
|
|
// connect Demodulated Signal to ADC:
|
|
SetAdcMuxFor(ADC_MUXSEL_HIPKD);
|
|
|
|
LED_D_OFF();
|
|
// Signal field is on with the appropriate LED
|
|
if (fpga_minor_mode == FPGA_HF_ISO14443A_READER_MOD || fpga_minor_mode == FPGA_HF_ISO14443A_READER_LISTEN)
|
|
LED_D_ON();
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | fpga_minor_mode);
|
|
SpinDelay(50);
|
|
|
|
// Start the timer
|
|
StartCountSspClk();
|
|
|
|
// Prepare the demodulation functions
|
|
Demod14aReset();
|
|
Uart14aReset();
|
|
NextTransferTime = 2 * DELAY_ARM2AIR_AS_READER;
|
|
iso14a_set_timeout(1060); // 106 * 10ms default
|
|
|
|
g_hf_field_active = true;
|
|
}
|
|
|
|
/* Peter Fillmore 2015
|
|
Added card id field to the function info from ISO14443A standard
|
|
|
|
b1 = Block Number
|
|
b2 = RFU (always 1)
|
|
b3 = depends on block
|
|
b4 = Card ID following if set to 1
|
|
b5 = depends on block type
|
|
b6 = depends on block type
|
|
b7,b8 = block type.
|
|
|
|
Coding of I-BLOCK:
|
|
b8 b7 b6 b5 b4 b3 b2 b1
|
|
0 0 0 x x x 1 x
|
|
b5 = chaining bit
|
|
|
|
Coding of R-block:
|
|
b8 b7 b6 b5 b4 b3 b2 b1
|
|
1 0 1 x x 0 1 x
|
|
b5 = ACK/NACK
|
|
|
|
Coding of S-block:
|
|
b8 b7 b6 b5 b4 b3 b2 b1
|
|
1 1 x x x 0 1 0
|
|
b5,b6 = 00 - DESELECT
|
|
11 - WTX
|
|
*/
|
|
int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, bool send_chaining, void *data, uint16_t data_len, uint8_t *res) {
|
|
// PCB(1) + APDU + CRC(2) has to fit inside one ISO14443 frame, which is
|
|
// also the limit ReaderTransmit() can encode into the tosend buffer.
|
|
if (cmd_len + 3 > MAX_FRAME_SIZE) {
|
|
return PM3_EINVARG;
|
|
}
|
|
|
|
uint8_t real_cmd[MAX_FRAME_SIZE] = {0};
|
|
|
|
if (cmd_len) {
|
|
// ISO 14443 APDU frame: PCB [CID] [NAD] APDU CRC PCB=0x02
|
|
real_cmd[0] = 0x02; // bnr,nad,cid,chn=0; i-block(0x00)
|
|
if (send_chaining) {
|
|
real_cmd[0] |= 0x10;
|
|
}
|
|
// put block number into the PCB
|
|
real_cmd[0] |= iso14_pcb_blocknum;
|
|
memcpy(real_cmd + 1, cmd, cmd_len);
|
|
} else {
|
|
// R-block. ACK
|
|
real_cmd[0] = 0xA2; // r-block + ACK
|
|
real_cmd[0] |= iso14_pcb_blocknum;
|
|
}
|
|
AddCrc14A(real_cmd, cmd_len + 1);
|
|
|
|
ReaderTransmit(real_cmd, cmd_len + 3, NULL);
|
|
|
|
// tearoff occurred
|
|
if (tearoff_hook() == PM3_ETEAROFF) {
|
|
return -1;
|
|
}
|
|
|
|
size_t len = ReaderReceive(data, data_len, parity_array);
|
|
uint8_t *data_bytes = (uint8_t *) data;
|
|
|
|
if (len == 0) {
|
|
return 0; // DATA LINK ERROR
|
|
}
|
|
|
|
uint32_t save_iso14a_timeout = iso14a_get_timeout();
|
|
|
|
// S-Block WTX
|
|
while (len && ((data_bytes[0] & 0xF2) == 0xF2)) {
|
|
|
|
if (BUTTON_PRESS() || data_available()) {
|
|
return -3;
|
|
}
|
|
|
|
// Inform client of WTX 38ms == MAX_ISO14A_TIMEOUT
|
|
send_wtx(38);
|
|
|
|
// byte1 - WTXM [1..59]. command FWT=FWT*WTXM
|
|
data_bytes[1] &= 0x3F; // 2 high bits mandatory set to 0b
|
|
|
|
// temporarily increase timeout
|
|
// field cycles, 1/1356000
|
|
// MAX_ISO14A_TIMEOUT == 524288 / 13560000
|
|
// typically 8192 / 13560000
|
|
iso14a_set_timeout(MAX(data_bytes[1] * save_iso14a_timeout, MAX_ISO14A_TIMEOUT));
|
|
|
|
// Transmit WTX back
|
|
AddCrc14A(data_bytes, len - 2);
|
|
ReaderTransmit(data_bytes, len, NULL);
|
|
|
|
// retrieve the result again (with increased timeout)
|
|
len = ReaderReceive(data_bytes, data_len, parity_array);
|
|
|
|
}
|
|
|
|
iso14a_set_timeout(save_iso14a_timeout);
|
|
|
|
// if we received an I- or R(ACK)-Block with a block number equal to the
|
|
// current block number, toggle the current block number
|
|
if (len >= 3 // PCB+CRC = 3 bytes
|
|
&& ((data_bytes[0] & 0xC0) == 0 // I-Block
|
|
|| (data_bytes[0] & 0xD0) == 0x80) // R-Block with ACK bit set to 0
|
|
&& (data_bytes[0] & 0x01) == iso14_pcb_blocknum) { // equal block numbers
|
|
iso14_pcb_blocknum ^= 1;
|
|
}
|
|
|
|
// if we received I-block with chaining we need to send ACK and receive another block of data
|
|
if (res) {
|
|
*res = data_bytes[0];
|
|
}
|
|
|
|
if (len >= 3 && !CheckCrc14A(data_bytes, len)) {
|
|
return -1;
|
|
}
|
|
|
|
if (len) {
|
|
// cut frame byte
|
|
len -= 1;
|
|
for (int i = 0; i < len; i++) {
|
|
data_bytes[i] = data_bytes[i + 1];
|
|
}
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static void reply_iso14a_raw(iso14a_raw_resp_t *response, uint8_t *respbuf, uint16_t len) {
|
|
response->len = len;
|
|
response->sel = 0;
|
|
reply_ng(CMD_HF_ISO14443A_READER, PM3_SUCCESS, respbuf, ISO14A_RESP_LEN(len));
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Read an ISO 14443a tag. Send out commands and store answers.
|
|
//-----------------------------------------------------------------------------
|
|
// Callers send one iso14a_raw_cmd_t and get back one iso14a_raw_resp_t.
|
|
void ReaderIso14443a(PacketCommandNG *c) {
|
|
|
|
iso14a_command_t param;
|
|
size_t len, lenbits;
|
|
uint32_t timeout, wait_us;
|
|
uint8_t *cmd;
|
|
|
|
if (c->ng) {
|
|
|
|
if (c->length < sizeof(iso14a_raw_cmd_t)) {
|
|
reply_ng(CMD_HF_ISO14443A_READER, PM3_EINVARG, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
iso14a_raw_cmd_t *payload = (iso14a_raw_cmd_t *)c->data.asBytes;
|
|
|
|
if (payload->len > (c->length - sizeof(iso14a_raw_cmd_t))) {
|
|
reply_ng(CMD_HF_ISO14443A_READER, PM3_EINVARG, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
param = payload->flags;
|
|
len = payload->len;
|
|
lenbits = payload->lenbits;
|
|
timeout = payload->timeout;
|
|
wait_us = payload->wait_us;
|
|
cmd = payload->data;
|
|
|
|
} else {
|
|
// every caller is NG now, OLD/MIX frames are no longer accepted
|
|
reply_ng(CMD_HF_ISO14443A_READER, PM3_EINVARG, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
uint32_t arg0;
|
|
|
|
// the reply frame is built in place: `buf` is its data[] area
|
|
uint8_t respbuf[PM3_CMD_DATA_SIZE] = {0x00};
|
|
iso14a_raw_resp_t *response = (iso14a_raw_resp_t *)respbuf;
|
|
uint8_t *buf = response->data;
|
|
|
|
if ((param & ISO14A_CONNECT) == ISO14A_CONNECT) {
|
|
iso14_pcb_blocknum = 0;
|
|
}
|
|
|
|
if ((param & ISO14A_CLEARTRACE) == ISO14A_CLEARTRACE) {
|
|
clear_trace();
|
|
}
|
|
|
|
set_tracing(true);
|
|
|
|
if ((param & ISO14A_REQUEST_TRIGGER) == ISO14A_REQUEST_TRIGGER) {
|
|
iso14a_set_trigger(true);
|
|
}
|
|
|
|
if ((param & ISO14A_CONNECT) == ISO14A_CONNECT) {
|
|
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
|
|
|
|
// notify client selecting status.
|
|
// if failed selecting, turn off antenna and quit.
|
|
if ((param & ISO14A_NO_SELECT) != ISO14A_NO_SELECT) {
|
|
iso14a_card_select_t *card = (iso14a_card_select_t *)buf;
|
|
|
|
arg0 = iso14443a_select_cardEx(
|
|
NULL,
|
|
card,
|
|
&crypto1_uid,
|
|
true,
|
|
0,
|
|
((param & ISO14A_NO_RATS) == ISO14A_NO_RATS),
|
|
((param & ISO14A_USE_CUSTOM_POLLING) == ISO14A_USE_CUSTOM_POLLING) ? (iso14a_polling_parameters_t *)cmd : NULL,
|
|
false
|
|
);
|
|
// TODO: Improve by adding a cmd parser pointer and moving it by struct length to allow combining data with polling params
|
|
FpgaDisableTracing();
|
|
|
|
if ((param & ISO14A_CRYPTO1MODE) == ISO14A_CRYPTO1MODE) {
|
|
crypto1_auth_state = AUTH_FIRST;
|
|
crypto1_deinit(&crypto1_state);
|
|
}
|
|
|
|
response->len = sizeof(iso14a_card_select_t);
|
|
response->sel = arg0;
|
|
reply_ng(CMD_HF_ISO14443A_READER, PM3_SUCCESS, respbuf, ISO14A_RESP_LEN(sizeof(iso14a_card_select_t)));
|
|
if (arg0 == 0) {
|
|
goto OUT;
|
|
}
|
|
}
|
|
}
|
|
uint32_t save_iso14a_timeout = 0;
|
|
if ((param & ISO14A_SET_TIMEOUT) == ISO14A_SET_TIMEOUT) {
|
|
save_iso14a_timeout = iso14a_get_timeout();
|
|
iso14a_set_timeout(timeout);
|
|
}
|
|
|
|
if ((param & ISO14A_SET_WAIT_US) == ISO14A_SET_WAIT_US) {
|
|
if (wait_us > 0) {
|
|
SpinDelayUsPrecision(wait_us);
|
|
}
|
|
}
|
|
|
|
if ((param & ISO14A_APDU) == ISO14A_APDU) {
|
|
|
|
FpgaDisableTracing();
|
|
|
|
uint8_t res = 0;
|
|
arg0 = iso14_apdu(
|
|
cmd,
|
|
len,
|
|
((param & ISO14A_SEND_CHAINING) == ISO14A_SEND_CHAINING),
|
|
buf,
|
|
ISO14A_RESP_MAXLEN,
|
|
&res
|
|
);
|
|
|
|
response->len = arg0;
|
|
response->sel = res;
|
|
reply_ng(CMD_HF_ISO14443A_READER, PM3_SUCCESS, respbuf, ISO14A_RESP_LEN(arg0));
|
|
}
|
|
|
|
if ((param & ISO14A_RAW) == ISO14A_RAW) {
|
|
|
|
if ((param & ISO14A_CRYPTO1MODE) == ISO14A_CRYPTO1MODE) {
|
|
// Intercept special Auth command 6xxx<key>CRCA
|
|
if ((len == 10) && ((cmd[0] & 0xF0) == 0x60)) {
|
|
uint64_t ui64key = bytes_to_num((uint8_t *)&cmd[2], 6);
|
|
uint8_t res = 0x00;
|
|
if (mifare_classic_authex_cmd(&crypto1_state, crypto1_uid, cmd[1], cmd[0], ui64key, crypto1_auth_state, NULL, NULL, NULL, NULL, false, false)) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Auth error");
|
|
res = 0x04;
|
|
} else {
|
|
crypto1_auth_state = AUTH_NESTED;
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Auth succeeded");
|
|
res = 0x0a;
|
|
}
|
|
response->len = 1;
|
|
response->sel = 0;
|
|
response->data[0] = res;
|
|
reply_ng(CMD_HF_ISO14443A_READER, PM3_SUCCESS, respbuf, ISO14A_RESP_LEN(1));
|
|
goto CMD_DONE;
|
|
}
|
|
}
|
|
|
|
if ((param & ISO14A_APPEND_CMAC) == ISO14A_APPEND_CMAC) {
|
|
|
|
if (len) {
|
|
// calc and append CMAC
|
|
append_cmac(cmd, len);
|
|
|
|
len += 8;
|
|
// we skip lenbits since short 7bit commands is not in Ul-AES command set
|
|
}
|
|
}
|
|
|
|
if ((param & ISO14A_APPEND_CRC) == ISO14A_APPEND_CRC) {
|
|
// Don't append crc on empty bytearray...
|
|
if (len) {
|
|
|
|
if ((param & ISO14A_TOPAZMODE) == ISO14A_TOPAZMODE) {
|
|
AddCrc14B(cmd, len);
|
|
} else {
|
|
AddCrc14A(cmd, len);
|
|
}
|
|
|
|
len += 2;
|
|
|
|
if (lenbits) {
|
|
lenbits += 16;
|
|
}
|
|
}
|
|
}
|
|
if ((param & ISO14A_CRYPTO1MODE) == ISO14A_CRYPTO1MODE) {
|
|
// Force explicit parity
|
|
lenbits = len * 8;
|
|
}
|
|
|
|
if (param & ISO14A_NO_PARITY) {
|
|
ReaderTransmitBitsPar(cmd, lenbits ? lenbits : len * 8, NULL, NULL);
|
|
} else if (lenbits > 0) {
|
|
|
|
// want to send a specific number of bits (e.g. short commands)
|
|
|
|
if ((param & ISO14A_TOPAZMODE) == ISO14A_TOPAZMODE) {
|
|
|
|
int bits_to_send = lenbits;
|
|
uint16_t i = 0;
|
|
|
|
// first byte is always short (7bits) and no parity
|
|
ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 7), NULL, NULL);
|
|
bits_to_send -= 7;
|
|
|
|
while (bits_to_send > 0) {
|
|
// following bytes are 8 bit and no parity
|
|
ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 8), NULL, NULL);
|
|
bits_to_send -= 8;
|
|
}
|
|
|
|
} else {
|
|
GetParity(cmd, lenbits / 8, parity_array);
|
|
if ((param & ISO14A_CRYPTO1MODE) == ISO14A_CRYPTO1MODE) {
|
|
mf_crypto1_encrypt(&crypto1_state, cmd, len, parity_array);
|
|
}
|
|
// bytes are 8 bit with odd parity
|
|
ReaderTransmitBitsPar(cmd, lenbits, parity_array, NULL);
|
|
}
|
|
|
|
} else {
|
|
|
|
// want to send complete bytes only
|
|
|
|
if ((param & ISO14A_TOPAZMODE) == ISO14A_TOPAZMODE) {
|
|
|
|
size_t i = 0;
|
|
|
|
// first byte: 7 bits, no paritiy
|
|
ReaderTransmitBitsPar(&cmd[i++], 7, NULL, NULL);
|
|
|
|
while (i < len) {
|
|
// following bytes: 8 bits, no paritiy
|
|
ReaderTransmitBitsPar(&cmd[i++], 8, NULL, NULL);
|
|
}
|
|
|
|
} else {
|
|
// 8 bits, odd parity
|
|
ReaderTransmit(cmd, len, NULL);
|
|
}
|
|
}
|
|
|
|
if ((param & ISO14A_TOPAZMODE) == ISO14A_TOPAZMODE) {
|
|
|
|
if (cmd[0] == TOPAZ_WRITE_E8 || cmd[0] == TOPAZ_WRITE_NE8) {
|
|
|
|
// tearoff occurred
|
|
if (tearoff_hook() == PM3_ETEAROFF) {
|
|
FpgaDisableTracing();
|
|
reply_iso14a_raw(response, respbuf, 0);
|
|
} else {
|
|
arg0 = ReaderReceive(buf, ISO14A_RESP_MAXLEN, parity_array);
|
|
FpgaDisableTracing();
|
|
reply_iso14a_raw(response, respbuf, arg0);
|
|
}
|
|
|
|
} else {
|
|
arg0 = ReaderReceive(buf, ISO14A_RESP_MAXLEN, parity_array);
|
|
FpgaDisableTracing();
|
|
reply_iso14a_raw(response, respbuf, arg0);
|
|
}
|
|
|
|
} else {
|
|
|
|
// tearoff occurred
|
|
if (tearoff_hook() == PM3_ETEAROFF) {
|
|
FpgaDisableTracing();
|
|
reply_iso14a_raw(response, respbuf, 0);
|
|
} else {
|
|
arg0 = ReaderReceiveEx(buf, ISO14A_RESP_MAXLEN, parity_array, (param & ISO14A_NO_PARITY) != 0);
|
|
|
|
if ((param & ISO14A_CRYPTO1MODE) == ISO14A_CRYPTO1MODE) {
|
|
mf_crypto1_decrypt(&crypto1_state, buf, arg0);
|
|
}
|
|
|
|
if ((param & ISO14A_APPEND_CMAC) == ISO14A_APPEND_CMAC) {
|
|
increase_session_counter();
|
|
}
|
|
FpgaDisableTracing();
|
|
reply_iso14a_raw(response, respbuf, arg0);
|
|
}
|
|
}
|
|
}
|
|
CMD_DONE:
|
|
if ((param & ISO14A_REQUEST_TRIGGER) == ISO14A_REQUEST_TRIGGER) {
|
|
iso14a_set_trigger(false);
|
|
}
|
|
|
|
if ((param & ISO14A_SET_TIMEOUT) == ISO14A_SET_TIMEOUT) {
|
|
iso14a_set_timeout(save_iso14a_timeout);
|
|
}
|
|
|
|
if ((param & ISO14A_NO_DISCONNECT) == ISO14A_NO_DISCONNECT) {
|
|
return;
|
|
}
|
|
|
|
OUT:
|
|
|
|
crypto1_auth_state = AUTH_FIRST;
|
|
hf_field_off();
|
|
set_tracing(false);
|
|
}
|
|
|
|
// Determine the distance between two nonces.
|
|
// Assume that the difference is small, but we don't know which is first.
|
|
// Therefore try in alternating directions.
|
|
static int32_t dist_nt(uint32_t nt1, uint32_t nt2) {
|
|
|
|
if (nt1 == nt2) {
|
|
return 0;
|
|
}
|
|
|
|
uint32_t nttmp1 = nt1;
|
|
uint32_t nttmp2 = nt2;
|
|
|
|
for (uint16_t i = 1; i < 32768; i++) {
|
|
nttmp1 = prng_successor(nttmp1, 1);
|
|
if (nttmp1 == nt2) {
|
|
return i;
|
|
}
|
|
|
|
nttmp2 = prng_successor(nttmp2, 1);
|
|
if (nttmp2 == nt1) {
|
|
return -i;
|
|
}
|
|
}
|
|
|
|
return (-99999); // either nt1 or nt2 are invalid nonces
|
|
}
|
|
|
|
|
|
#define PRNG_SEQUENCE_LENGTH (1 << 16)
|
|
#define MAX_UNEXPECTED_RANDOM (4) // maximum number of unexpected (i.e. real) random numbers when trying to sync. Then give up.
|
|
#define MAX_SYNC_TRIES (32)
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Recover several bits of the cypher stream. This implements (first stages of)
|
|
// the algorithm described in "The Dark Side of Security by Obscurity and
|
|
// Cloning MiFare Classic Rail and Building Passes, Anywhere, Anytime"
|
|
// (article by Nicolas T. Courtois, 2009)
|
|
//-----------------------------------------------------------------------------
|
|
void ReaderMifare(bool first_try, uint8_t block, uint8_t keytype) {
|
|
|
|
iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
|
|
|
|
BigBuf_free();
|
|
BigBuf_Clear_ext(false);
|
|
set_tracing(true);
|
|
|
|
uint8_t mf_auth[4] = { keytype, block, 0x00, 0x00 };
|
|
uint8_t mf_nr_ar[8] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
uint8_t uid[10] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
|
|
uint8_t par_list[8] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
uint8_t ks_list[8] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
uint8_t receivedAnswer[4] = {0x00};
|
|
uint8_t receivedAnswerPar[1] = {0x00};
|
|
uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough
|
|
uint8_t nt_diff = 0;
|
|
|
|
uint32_t nt = 0, previous_nt = 0, cuid = 0;
|
|
uint32_t sync_time = GetCountSspClk() & 0xfffffff8;
|
|
|
|
int32_t catch_up_cycles = 0;
|
|
int32_t last_catch_up = 0;
|
|
int32_t isOK = 0;
|
|
|
|
uint16_t elapsed_prng_sequences = 1;
|
|
uint16_t consecutive_resyncs = 0;
|
|
uint16_t unexpected_random = 0;
|
|
uint16_t sync_tries = 0;
|
|
|
|
bool have_uid = false;
|
|
uint8_t cascade_levels = 0;
|
|
|
|
// static variables here, is re-used in the next call
|
|
static int32_t sync_cycles = 0;
|
|
static uint32_t nt_attacked = 0;
|
|
static uint8_t mf_nr_ar3 = 0;
|
|
static uint8_t par_low = 0;
|
|
|
|
int return_status = PM3_SUCCESS;
|
|
|
|
AddCrc14A(mf_auth, 2);
|
|
|
|
if (first_try) {
|
|
sync_cycles = PRNG_SEQUENCE_LENGTH; // Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces).
|
|
nt_attacked = 0;
|
|
mf_nr_ar3 = 0;
|
|
par_low = 0;
|
|
} else {
|
|
// we were unsuccessful on a previous call.
|
|
// Try another READER nonce (first 3 parity bits remain the same)
|
|
mf_nr_ar3++;
|
|
mf_nr_ar[3] = mf_nr_ar3;
|
|
par[0] = par_low;
|
|
}
|
|
|
|
LED_C_ON();
|
|
uint16_t checkbtn_cnt = 0;
|
|
uint16_t i;
|
|
for (i = 0; true; ++i) {
|
|
|
|
bool received_nack = false;
|
|
|
|
WDT_HIT();
|
|
|
|
// Test if the action was cancelled
|
|
if (checkbtn_cnt == 1000) {
|
|
if (BUTTON_PRESS() || data_available()) {
|
|
isOK = 5;
|
|
return_status = PM3_EOPABORTED;
|
|
break;
|
|
}
|
|
checkbtn_cnt = 0;
|
|
}
|
|
++checkbtn_cnt;
|
|
|
|
// this part is from Piwi's faster nonce collecting part in Hardnested.
|
|
if (have_uid == false) { // need a full select cycle to get the uid first
|
|
iso14a_card_select_t card_info;
|
|
if (iso14443a_select_card(uid, &card_info, &cuid, true, 0, true) == 0) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Mifare: Can't select card (ALL)");
|
|
continue;
|
|
}
|
|
switch (card_info.uidlen) {
|
|
case 4 :
|
|
cascade_levels = 1;
|
|
break;
|
|
case 7 :
|
|
cascade_levels = 2;
|
|
break;
|
|
case 10:
|
|
cascade_levels = 3;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
have_uid = true;
|
|
} else { // no need for anticollision. We can directly select the card
|
|
if (iso14443a_fast_select_card(uid, cascade_levels) == 0) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Mifare: Can't select card (UID)");
|
|
continue;
|
|
}
|
|
}
|
|
|
|
elapsed_prng_sequences = 1;
|
|
|
|
// Sending timeslot of ISO14443a frame
|
|
sync_time = (sync_time & 0xfffffff8) + sync_cycles + catch_up_cycles;
|
|
catch_up_cycles = 0;
|
|
|
|
#define SYNC_TIME_BUFFER 16 // if there is only SYNC_TIME_BUFFER left before next planned sync, wait for next PRNG cycle
|
|
|
|
// if we missed the sync time already or are about to miss it, advance to the next nonce repeat
|
|
while (sync_time < GetCountSspClk() + SYNC_TIME_BUFFER) {
|
|
++elapsed_prng_sequences;
|
|
sync_time = (sync_time & 0xfffffff8) + sync_cycles;
|
|
}
|
|
|
|
// Transmit MIFARE_CLASSIC_AUTH at synctime. Should result in returning the same tag nonce (== nt_attacked)
|
|
ReaderTransmit(mf_auth, sizeof(mf_auth), &sync_time);
|
|
|
|
// Receive the (4 Byte) "random" TAG nonce
|
|
if (ReaderReceive(receivedAnswer, sizeof(receivedAnswer), receivedAnswerPar) != 4) {
|
|
continue;
|
|
}
|
|
|
|
previous_nt = nt;
|
|
nt = bytes_to_num(receivedAnswer, 4);
|
|
|
|
// Transmit reader nonce with fake par
|
|
ReaderTransmitPar(mf_nr_ar, sizeof(mf_nr_ar), par, NULL);
|
|
|
|
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
|
|
int resp_res = ReaderReceive(receivedAnswer, sizeof(receivedAnswer), receivedAnswerPar);
|
|
if (resp_res == 1)
|
|
received_nack = true;
|
|
else if (resp_res == 4) {
|
|
// did we get lucky and got our dummykey to be valid?
|
|
// however we don't feed key w uid it the prng..
|
|
isOK = 6;
|
|
return_status = PM3_ESOFT;
|
|
break;
|
|
}
|
|
|
|
|
|
// we didn't calibrate our clock yet,
|
|
// iceman: has to be calibrated every time.
|
|
if (previous_nt && (nt_attacked == 0)) {
|
|
|
|
int32_t nt_distance = dist_nt(previous_nt, nt);
|
|
|
|
// if no distance between, then we are in sync.
|
|
if (nt_distance == 0) {
|
|
nt_attacked = nt;
|
|
} else {
|
|
if (nt_distance == -99999) { // invalid nonce received
|
|
unexpected_random++;
|
|
if (unexpected_random > MAX_UNEXPECTED_RANDOM) {
|
|
isOK = 3; // Card has an unpredictable PRNG. Give up
|
|
return_status = PM3_ESOFT;
|
|
break;
|
|
} else {
|
|
continue; // continue trying...
|
|
}
|
|
}
|
|
|
|
if (++sync_tries > MAX_SYNC_TRIES) {
|
|
isOK = 4; // Card's PRNG runs at an unexpected frequency or resets unexpectedly
|
|
return_status = PM3_ESOFT;
|
|
break;
|
|
}
|
|
|
|
sync_cycles = (sync_cycles - nt_distance) / elapsed_prng_sequences;
|
|
|
|
// no negative sync_cycles, and too small sync_cycles will result in continuous misses
|
|
if (sync_cycles <= 10) {
|
|
sync_cycles += PRNG_SEQUENCE_LENGTH;
|
|
}
|
|
|
|
// reset sync_cycles
|
|
if (sync_cycles > PRNG_SEQUENCE_LENGTH * 2) {
|
|
sync_cycles = PRNG_SEQUENCE_LENGTH;
|
|
sync_time = GetCountSspClk() & 0xfffffff8;
|
|
}
|
|
|
|
if (g_dbglevel >= DBG_EXTENDED) {
|
|
Dbprintf("calibrating in cycle %d. nt_distance=%d, elapsed_prng_sequences=%d, new sync_cycles: %d\n"
|
|
, i
|
|
, nt_distance
|
|
, elapsed_prng_sequences
|
|
, sync_cycles
|
|
);
|
|
}
|
|
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if ((nt != nt_attacked) && nt_attacked) { // we somehow lost sync. Try to catch up again...
|
|
|
|
catch_up_cycles = -dist_nt(nt_attacked, nt);
|
|
if (catch_up_cycles == 99999) { // invalid nonce received. Don't resync on that one.
|
|
catch_up_cycles = 0;
|
|
continue;
|
|
}
|
|
// average?
|
|
catch_up_cycles /= elapsed_prng_sequences;
|
|
|
|
if (catch_up_cycles == last_catch_up) {
|
|
consecutive_resyncs++;
|
|
} else {
|
|
last_catch_up = catch_up_cycles;
|
|
consecutive_resyncs = 0;
|
|
}
|
|
|
|
if (consecutive_resyncs < 3) {
|
|
if (g_dbglevel >= DBG_EXTENDED) {
|
|
Dbprintf("Lost sync in cycle %d. nt_distance=%d. Consecutive Resyncs = %d. Trying one time catch up...\n", i, catch_up_cycles, consecutive_resyncs);
|
|
}
|
|
} else {
|
|
sync_cycles += catch_up_cycles;
|
|
|
|
if (g_dbglevel >= DBG_EXTENDED) {
|
|
Dbprintf("Lost sync in cycle %d for the fourth time consecutively (nt_distance = %d). Adjusting sync_cycles to %d.\n", i, catch_up_cycles, sync_cycles);
|
|
}
|
|
|
|
last_catch_up = 0;
|
|
catch_up_cycles = 0;
|
|
consecutive_resyncs = 0;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
|
|
if (received_nack) {
|
|
catch_up_cycles = 8; // the PRNG is delayed by 8 cycles due to the NAC (4Bits = 0x05 encrypted) transfer
|
|
|
|
if (nt_diff == 0) {
|
|
par_low = par[0] & 0xE0; // there is no need to check all parities for other nt_diff. Parity Bits for mf_nr_ar[0..2] won't change
|
|
}
|
|
|
|
par_list[nt_diff] = reflect8(par[0]);
|
|
ks_list[nt_diff] = receivedAnswer[0] ^ 0x05; // xor with NACK value to get keystream
|
|
|
|
// Test if the information is complete
|
|
if (nt_diff == 0x07) {
|
|
isOK = 1;
|
|
return_status = PM3_SUCCESS;
|
|
break;
|
|
}
|
|
|
|
nt_diff = (nt_diff + 1) & 0x07;
|
|
mf_nr_ar[3] = (mf_nr_ar[3] & 0x1F) | (nt_diff << 5);
|
|
par[0] = par_low;
|
|
|
|
} else {
|
|
// No NACK.
|
|
if (nt_diff == 0 && first_try) {
|
|
|
|
par[0]++;
|
|
|
|
if (par[0] == 0) { // tried all 256 possible parities without success. Card doesn't send NACK.
|
|
isOK = 2;
|
|
return_status = PM3_ESOFT;
|
|
break;
|
|
}
|
|
|
|
} else {
|
|
// Why this?
|
|
par[0] = ((par[0] & 0x1F) + 1) | par_low;
|
|
}
|
|
}
|
|
|
|
// reset the resyncs since we got a complete transaction on right time.
|
|
consecutive_resyncs = 0;
|
|
} // end for loop
|
|
|
|
mf_nr_ar[3] &= 0x1F;
|
|
|
|
if (g_dbglevel >= DBG_EXTENDED) Dbprintf("Number of sent auth requests: %u", i);
|
|
|
|
FpgaDisableTracing();
|
|
|
|
struct {
|
|
int32_t isOK;
|
|
uint8_t cuid[4];
|
|
uint8_t nt[4];
|
|
uint8_t par_list[8];
|
|
uint8_t ks_list[8];
|
|
uint8_t nr[4];
|
|
uint8_t ar[4];
|
|
} PACKED payload;
|
|
|
|
payload.isOK = isOK;
|
|
num_to_bytes(cuid, 4, payload.cuid);
|
|
num_to_bytes(nt, 4, payload.nt);
|
|
memcpy(payload.par_list, par_list, sizeof(payload.par_list));
|
|
memcpy(payload.ks_list, ks_list, sizeof(payload.ks_list));
|
|
memcpy(payload.nr, mf_nr_ar, sizeof(payload.nr));
|
|
memcpy(payload.ar, mf_nr_ar + 4, sizeof(payload.ar));
|
|
|
|
reply_ng(CMD_HF_MIFARE_READER, return_status, (uint8_t *)&payload, sizeof(payload));
|
|
|
|
hf_field_off();
|
|
set_tracing(false);
|
|
}
|
|
|
|
/*
|
|
* Mifare Classic NACK-bug detection
|
|
* Thanks to @doegox for the feedback and new approaches.
|
|
*/
|
|
void DetectNACKbug(void) {
|
|
uint8_t mf_auth[4] = { MIFARE_AUTH_KEYA, 0x00, 0xF5, 0x7B };
|
|
uint8_t mf_nr_ar[8] = { 0x00 };
|
|
uint8_t uid[10] = { 0x00 };
|
|
uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = { 0x00 };
|
|
uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE] = { 0x00 };
|
|
uint8_t par[2] = {0x00 }; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough
|
|
|
|
uint32_t nt = 0, previous_nt = 0, nt_attacked = 0, cuid = 0;
|
|
int32_t catch_up_cycles = 0, last_catch_up = 0;
|
|
uint8_t cascade_levels = 0, num_nacks = 0, isOK = 0;
|
|
uint16_t elapsed_prng_sequences = 1;
|
|
uint16_t consecutive_resyncs = 0;
|
|
uint16_t unexpected_random = 0;
|
|
uint16_t sync_tries = 0;
|
|
uint32_t sync_time = 0;
|
|
bool have_uid = false;
|
|
|
|
int32_t status = PM3_SUCCESS;
|
|
|
|
// Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces).
|
|
int32_t sync_cycles = PRNG_SEQUENCE_LENGTH;
|
|
|
|
BigBuf_free();
|
|
BigBuf_Clear_ext(false);
|
|
set_tracing(true);
|
|
iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
|
|
|
|
sync_time = GetCountSspClk() & 0xfffffff8;
|
|
|
|
LED_C_ON();
|
|
uint16_t checkbtn_cnt = 0;
|
|
|
|
uint16_t i;
|
|
for (i = 1; true; ++i) {
|
|
|
|
bool received_nack = false;
|
|
|
|
// Cards always leaks a NACK, no matter the parity
|
|
if ((i == 10) && (num_nacks == i - 1)) {
|
|
isOK = 2;
|
|
break;
|
|
}
|
|
|
|
WDT_HIT();
|
|
|
|
// Test if the action was cancelled
|
|
if (checkbtn_cnt == 1000) {
|
|
if (BUTTON_PRESS() || data_available()) {
|
|
status = PM3_EOPABORTED;
|
|
break;
|
|
}
|
|
checkbtn_cnt = 0;
|
|
}
|
|
++checkbtn_cnt;
|
|
|
|
// this part is from Piwi's faster nonce collecting part in Hardnested.
|
|
if (have_uid == false) { // need a full select cycle to get the uid first
|
|
iso14a_card_select_t card_info;
|
|
if (iso14443a_select_card(uid, &card_info, &cuid, true, 0, true) == 0) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Mifare: Can't select card (ALL)");
|
|
i = 0;
|
|
continue;
|
|
}
|
|
switch (card_info.uidlen) {
|
|
case 4 :
|
|
cascade_levels = 1;
|
|
break;
|
|
case 7 :
|
|
cascade_levels = 2;
|
|
break;
|
|
case 10:
|
|
cascade_levels = 3;
|
|
break;
|
|
default:
|
|
i = 0;
|
|
have_uid = false;
|
|
continue;
|
|
}
|
|
have_uid = true;
|
|
} else { // no need for anticollision. We can directly select the card
|
|
if (iso14443a_fast_select_card(uid, cascade_levels) == 0) {
|
|
if (g_dbglevel >= DBG_INFO) Dbprintf("Mifare: Can't select card (UID)");
|
|
i = 0;
|
|
have_uid = false;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
elapsed_prng_sequences = 1;
|
|
|
|
// Sending timeslot of ISO14443a frame
|
|
sync_time = (sync_time & 0xfffffff8) + sync_cycles + catch_up_cycles;
|
|
catch_up_cycles = 0;
|
|
|
|
// if we missed the sync time already, advance to the next nonce repeat
|
|
while (GetCountSspClk() > sync_time) {
|
|
++elapsed_prng_sequences;
|
|
sync_time = (sync_time & 0xfffffff8) + sync_cycles;
|
|
}
|
|
|
|
// Transmit MIFARE_CLASSIC_AUTH at synctime. Should result in returning the same tag nonce (== nt_attacked)
|
|
ReaderTransmit(mf_auth, sizeof(mf_auth), &sync_time);
|
|
|
|
// Receive the (4 Byte) "random" TAG nonce
|
|
if (ReaderReceive(receivedAnswer, sizeof(receivedAnswer), receivedAnswerPar) == 0) {
|
|
continue;
|
|
}
|
|
|
|
previous_nt = nt;
|
|
nt = bytes_to_num(receivedAnswer, 4);
|
|
|
|
// Transmit reader nonce with fake par
|
|
ReaderTransmitPar(mf_nr_ar, sizeof(mf_nr_ar), par, NULL);
|
|
|
|
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
|
|
if (ReaderReceive(receivedAnswer, sizeof(receivedAnswer), receivedAnswerPar)) {
|
|
received_nack = true;
|
|
num_nacks++;
|
|
// ALWAYS leak Detection. Well, we could be lucky and get a response nack on first try.
|
|
if (i == num_nacks) {
|
|
continue;
|
|
}
|
|
}
|
|
|
|
// we didn't calibrate our clock yet,
|
|
// iceman: has to be calibrated every time.
|
|
if (previous_nt && !nt_attacked) {
|
|
|
|
int nt_distance = dist_nt(previous_nt, nt);
|
|
|
|
// if no distance between, then we are in sync.
|
|
if (nt_distance == 0) {
|
|
nt_attacked = nt;
|
|
} else {
|
|
if (nt_distance == -99999) { // invalid nonce received
|
|
unexpected_random++;
|
|
if (unexpected_random > MAX_UNEXPECTED_RANDOM) {
|
|
// Card has an unpredictable PRNG. Give up
|
|
isOK = 98;
|
|
break;
|
|
} else {
|
|
if (sync_cycles <= 0) {
|
|
sync_cycles += PRNG_SEQUENCE_LENGTH;
|
|
}
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (++sync_tries > MAX_SYNC_TRIES) {
|
|
isOK = 97; // Card's PRNG runs at an unexpected frequency or resets unexpectedly
|
|
break;
|
|
}
|
|
|
|
sync_cycles = (sync_cycles - nt_distance) / elapsed_prng_sequences;
|
|
|
|
if (sync_cycles <= 0) {
|
|
sync_cycles += PRNG_SEQUENCE_LENGTH;
|
|
}
|
|
|
|
if (sync_cycles > PRNG_SEQUENCE_LENGTH * 2) {
|
|
isOK = 96; // Card's PRNG runs at an unexpected frequency or resets unexpectedly
|
|
break;
|
|
}
|
|
|
|
if (g_dbglevel >= DBG_EXTENDED) {
|
|
Dbprintf("calibrating in cycle %d. nt_distance=%d, elapsed_prng_sequences=%d, new sync_cycles: %d\n", i, nt_distance, elapsed_prng_sequences, sync_cycles);
|
|
}
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if ((nt != nt_attacked) && nt_attacked) {
|
|
// we somehow lost sync. Try to catch up again...
|
|
catch_up_cycles = -dist_nt(nt_attacked, nt);
|
|
|
|
if (catch_up_cycles == 99999) {
|
|
// invalid nonce received. Don't resync on that one.
|
|
catch_up_cycles = 0;
|
|
continue;
|
|
}
|
|
// average?
|
|
catch_up_cycles /= elapsed_prng_sequences;
|
|
|
|
if (catch_up_cycles == last_catch_up) {
|
|
consecutive_resyncs++;
|
|
} else {
|
|
last_catch_up = catch_up_cycles;
|
|
consecutive_resyncs = 0;
|
|
}
|
|
|
|
if (consecutive_resyncs < 3) {
|
|
if (g_dbglevel >= DBG_EXTENDED) {
|
|
Dbprintf("Lost sync in cycle %d. nt_distance=%d. Consecutive Resyncs = %d. Trying one time catch up...\n", i, catch_up_cycles, consecutive_resyncs);
|
|
}
|
|
} else {
|
|
sync_cycles += catch_up_cycles;
|
|
|
|
if (g_dbglevel >= DBG_EXTENDED) {
|
|
Dbprintf("Lost sync in cycle %d for the fourth time consecutively (nt_distance = %d). Adjusting sync_cycles to %d\n", i, catch_up_cycles, sync_cycles);
|
|
Dbprintf("nt [%08x] attacted [%08x]", nt, nt_attacked);
|
|
}
|
|
last_catch_up = 0;
|
|
catch_up_cycles = 0;
|
|
consecutive_resyncs = 0;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
|
|
if (received_nack) {
|
|
catch_up_cycles = 8; // the PRNG is delayed by 8 cycles due to the NAC (4Bits = 0x05 encrypted) transfer
|
|
}
|
|
|
|
// we are testing all 256 possibilities.
|
|
par[0]++;
|
|
|
|
// tried all 256 possible parities without success.
|
|
if (par[0] == 0) {
|
|
// did we get one NACK?
|
|
if (num_nacks == 1) {
|
|
isOK = 1;
|
|
}
|
|
break;
|
|
}
|
|
|
|
// reset the resyncs since we got a complete transaction on right time.
|
|
consecutive_resyncs = 0;
|
|
} // end for loop
|
|
|
|
// num_nacks = number of nacks received. should be only 1. if not its a clone card which always sends NACK (parity == 0) ?
|
|
// i = number of authentications sent. Not always 256, since we are trying to sync but close to it.
|
|
FpgaDisableTracing();
|
|
|
|
uint8_t data[4] = {isOK, num_nacks, 0, 0};
|
|
num_to_bytes(i, 2, data + 2);
|
|
reply_ng(CMD_HF_MIFARE_NACK_DETECT, status, data, 4);
|
|
|
|
BigBuf_free();
|
|
hf_field_off();
|
|
set_tracing(false);
|
|
}
|
|
|
|
|
|
// Increased the buffer size to allow for more complex responses
|
|
#define DYNAMIC_RESPONSE_BUFFER2_SIZE ( 512 )
|
|
// Modulation buffer must hold 3 + 9*frame_len bytes (1 byte per bit in OOK encoding).
|
|
// Max frame = 256 bytes (TOSEND_BUFFER_SIZE limit) → 3 + 9*256 = 2307 bytes needed.
|
|
// Original value of 1536 only supported ~170-byte frames.
|
|
#define DYNAMIC_MODULATION_BUFFER2_SIZE ( 2308 )
|
|
|
|
// EvilDaemond
|
|
// Based upon the SimulateIso14443aTag, this aims to instead take an AID Value you've supplied, and return your selected response.
|
|
// It can also continue after the AID has been selected, and respond to other request types.
|
|
// This was forked from the original function to allow for more flexibility in the future, and to increase the processing speed of the original function.
|
|
//
|
|
void SimulateIso14443aTagAID(uint8_t tagType, uint16_t flags, uint8_t *uid,
|
|
uint8_t *ats, size_t ats_len, uint8_t *aid, size_t aid_len,
|
|
uint8_t *selectaid_response, size_t selectaid_response_len,
|
|
uint8_t *getdata_response, size_t getdata_response_len) {
|
|
|
|
tag_response_info_t *responses;
|
|
uint32_t cuid = 0;
|
|
uint8_t pages = 0;
|
|
|
|
// command buffers
|
|
uint8_t receivedCmd[MAX_FRAME_SIZE] = { 0x00 };
|
|
uint8_t receivedCmdPar[MAX_PARITY_SIZE] = { 0x00 };
|
|
|
|
// Buffers must be provided by the caller, even if lengths are 0
|
|
// Copy the AID, AID Response, and the GetData APDU response into our variables
|
|
if ((aid == NULL) || (selectaid_response == NULL) || (getdata_response == NULL)) {
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EINVARG, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Note: we call FpgaDownloadAndGo_keep_EM(FPGA_BITSTREAM_HF) here although the
|
|
// FPGA isn't needed yet. iso14443a_setup() below does it otherwise, and a
|
|
// bitstream download frees and clears BigBuf - which by then holds the
|
|
// Emulator Memory and the precompiled anticollision responses.
|
|
//-----------------------------------------------------------------------------
|
|
FpgaDownloadAndGo_keep_EM(FPGA_BITSTREAM_HF);
|
|
|
|
// free eventually allocated BigBuf memory but keep Emulator Memory
|
|
BigBuf_free_keep_EM();
|
|
|
|
// clear trace before allocating. The response buffers come out of the same
|
|
// pool and BigBuf_malloc() won't hand out memory the trace still occupies.
|
|
clear_trace();
|
|
|
|
// Response payloads must fit within the dynamic response buffer,
|
|
// accounting for 1-byte IBlock header + 1-byte optional CID (offset 0 or 1)
|
|
if (selectaid_response_len + 2 > DYNAMIC_RESPONSE_BUFFER2_SIZE ||
|
|
getdata_response_len + 2 > DYNAMIC_RESPONSE_BUFFER2_SIZE) {
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EINVARG, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
uint8_t *dynamic_response_buffer2 = BigBuf_calloc(DYNAMIC_RESPONSE_BUFFER2_SIZE);
|
|
if (dynamic_response_buffer2 == NULL) {
|
|
BigBuf_free_keep_EM();
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EMALLOC, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
uint8_t *dynamic_modulation_buffer2 = BigBuf_calloc(DYNAMIC_MODULATION_BUFFER2_SIZE);
|
|
if (dynamic_modulation_buffer2 == NULL) {
|
|
BigBuf_free_keep_EM();
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EMALLOC, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
tag_response_info_t dynamic_response_info = {
|
|
.response = dynamic_response_buffer2,
|
|
.response_n = 0,
|
|
.modulation = dynamic_modulation_buffer2,
|
|
.modulation_n = 0
|
|
};
|
|
|
|
if (SimulateIso14443aInit(tagType, flags, uid, ats, ats_len, &responses, &cuid, &pages, NULL) == false) {
|
|
BigBuf_free_keep_EM();
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EINIT, NULL, 0);
|
|
return;
|
|
}
|
|
|
|
// We need to listen to the high-frequency, peak-detected path.
|
|
iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
iso14a_set_timeout(201400); // 106 * 19ms default *100?
|
|
|
|
int len = 0;
|
|
int retval = PM3_SUCCESS;
|
|
int sentCount = 0;
|
|
bool odd_reply = true;
|
|
|
|
set_tracing(true);
|
|
LED_A_ON();
|
|
|
|
// main loop
|
|
bool finished = false;
|
|
bool got_rats = false;
|
|
while (finished == false) {
|
|
// BUTTON_PRESS check done in GetIso14443aCommandFromReader
|
|
WDT_HIT();
|
|
|
|
tag_response_info_t *p_response = NULL;
|
|
|
|
// Clean receive command buffer
|
|
if (GetIso14443aCommandFromReader(receivedCmd, sizeof(receivedCmd), receivedCmdPar, &len) == false) {
|
|
Dbprintf("Emulator stopped. Trace length: %d ", BigBuf_get_traceLen());
|
|
retval = PM3_EOPABORTED;
|
|
break;
|
|
}
|
|
|
|
if (receivedCmd[0] == ISO14443A_CMD_REQA && len == 1) { // Received a REQUEST, but in HALTED, skip
|
|
odd_reply = !odd_reply;
|
|
if (odd_reply) {
|
|
p_response = &responses[RESP_INDEX_ATQA];
|
|
}
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_WUPA && len == 1) { // Received a WAKEUP
|
|
p_response = &responses[RESP_INDEX_ATQA];
|
|
} else if (receivedCmd[1] == 0x20 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && len == 2) { // Received request for UID (cascade 1)
|
|
p_response = &responses[RESP_INDEX_UIDC1];
|
|
} else if (receivedCmd[1] == 0x20 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && len == 2) { // Received request for UID (cascade 2)
|
|
p_response = &responses[RESP_INDEX_UIDC2];
|
|
} else if (receivedCmd[1] == 0x20 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && len == 2) { // Received request for UID (cascade 3)
|
|
p_response = &responses[RESP_INDEX_UIDC3];
|
|
} else if (receivedCmd[1] == 0x70 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && len == 9) { // Received a SELECT (cascade 1)
|
|
p_response = &responses[RESP_INDEX_SAKC1];
|
|
} else if (receivedCmd[1] == 0x70 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && len == 9) { // Received a SELECT (cascade 2)
|
|
p_response = &responses[RESP_INDEX_SAKC2];
|
|
} else if (receivedCmd[1] == 0x70 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && len == 9) { // Received a SELECT (cascade 3)
|
|
p_response = &responses[RESP_INDEX_SAKC3];
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_PPS) {
|
|
p_response = &responses[RESP_INDEX_PPS];
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_HALT && len == 4) { // Received a HALT
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
p_response = NULL;
|
|
if (got_rats) {
|
|
finished = true;
|
|
}
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_RATS && len == 4) { // Received a RATS request
|
|
p_response = &responses[RESP_INDEX_ATS];
|
|
got_rats = true;
|
|
} else {
|
|
// clear old dynamic responses
|
|
dynamic_response_info.response_n = 0;
|
|
dynamic_response_info.modulation_n = 0;
|
|
|
|
// Check for ISO 14443A-4 compliant commands, look at left byte (PCB)
|
|
uint8_t offset = 0;
|
|
switch (receivedCmd[0]) {
|
|
case 0x0B: // IBlock with CID
|
|
case 0x0A: {
|
|
offset = 1;
|
|
break;
|
|
}
|
|
case 0x02: // IBlock without CID
|
|
case 0x03: {
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x00;
|
|
|
|
switch (receivedCmd[2 + offset]) { // APDU Class Byte
|
|
// receivedCmd in this case is expecting to structured with possibly a CID, then the APDU command for SelectFile
|
|
// | IBlock (CID) | CID | APDU Command | CRC |
|
|
// or | IBlock (noCID) | APDU Command | CRC |
|
|
|
|
case 0xA4: { // SELECT FILE
|
|
// Select File AID uses the following format for GlobalPlatform
|
|
//
|
|
// | 00 | A4 | 04 | 00 | xx | AID | 00 |
|
|
// xx in this case is len of the AID value in hex
|
|
|
|
// aid len is found as a hex value in receivedCmd[6] (Index Starts at 0)
|
|
int received_aid_len = receivedCmd[5 + offset];
|
|
uint8_t *received_aid = &receivedCmd[6 + offset];
|
|
|
|
// Validate claimed AID length against actual received frame length
|
|
if ((6 + offset + received_aid_len) > len) {
|
|
dynamic_response_info.response[1 + offset] = 0x6A;
|
|
dynamic_response_info.response[2 + offset] = 0x80; // Wrong data
|
|
dynamic_response_info.response_n = 3 + offset;
|
|
break;
|
|
}
|
|
|
|
// aid enumeration flag
|
|
if ((flags & FLAG_ENUMERATE_AID) == FLAG_ENUMERATE_AID) {
|
|
Dbprintf("Received AID (%d):", received_aid_len);
|
|
Dbhexdump(received_aid_len, received_aid, false);
|
|
}
|
|
|
|
if ((received_aid_len == aid_len) && (memcmp(aid, received_aid, aid_len) == 0)) { // Evaluate the AID sent by the Reader to the AID supplied
|
|
// AID Response will be parsed here
|
|
memcpy(dynamic_response_info.response + 1 + offset, selectaid_response, selectaid_response_len);
|
|
dynamic_response_info.response_n = selectaid_response_len + 1 + offset;
|
|
} else { // Any other SELECT FILE command will return with a Not Found
|
|
dynamic_response_info.response[1 + offset] = 0x6A;
|
|
dynamic_response_info.response[2 + offset] = 0x82;
|
|
dynamic_response_info.response_n = 3 + offset;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 0xDA: { // PUT DATA
|
|
// Just send them a 90 00 response
|
|
dynamic_response_info.response[1 + offset] = 0x90;
|
|
dynamic_response_info.response[2 + offset] = 0x00;
|
|
dynamic_response_info.response_n = 3 + offset;
|
|
}
|
|
break;
|
|
|
|
case 0xCA: { // GET DATA
|
|
if (sentCount == 0) {
|
|
// APDU Command will just be parsed here
|
|
memcpy(dynamic_response_info.response + 1 + offset, getdata_response, getdata_response_len);
|
|
dynamic_response_info.response_n = getdata_response_len + 1 + offset;
|
|
} else {
|
|
finished = true;
|
|
break;
|
|
}
|
|
sentCount++;
|
|
}
|
|
break;
|
|
default : {
|
|
// Any other non-listed command
|
|
// Respond Not Found
|
|
dynamic_response_info.response[1 + offset] = 0x6A;
|
|
dynamic_response_info.response[2 + offset] = 0x82;
|
|
dynamic_response_info.response_n = 3 + offset;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 0xCA: // S-Block Deselect with CID
|
|
case 0xC2: { // S-Block Deselect without CID
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x00;
|
|
dynamic_response_info.response_n = 2;
|
|
finished = true;
|
|
}
|
|
break;
|
|
|
|
default: {
|
|
// Never seen this PCB before
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
if (g_dbglevel >= DBG_DEBUG) {
|
|
Dbprintf("Received unknown command (len=%d):", len);
|
|
Dbhexdump(len, receivedCmd, false);
|
|
}
|
|
if ((receivedCmd[0] & 0x10) == 0x10) {
|
|
Dbprintf("Warning, reader sent a chained command but we lack support for it. Ignoring command.");
|
|
}
|
|
// Do not respond
|
|
dynamic_response_info.response_n = 0;
|
|
}
|
|
break;
|
|
}
|
|
if (dynamic_response_info.response_n > 0) {
|
|
|
|
// Copy the CID from the reader query
|
|
if (offset > 0) {
|
|
dynamic_response_info.response[1] = receivedCmd[1];
|
|
}
|
|
|
|
// Add CRC bytes, always used in ISO 14443A-4 compliant cards
|
|
AddCrc14A(dynamic_response_info.response, dynamic_response_info.response_n);
|
|
dynamic_response_info.response_n += 2;
|
|
|
|
if (prepare_tag_modulation(&dynamic_response_info, DYNAMIC_MODULATION_BUFFER2_SIZE) == false) {
|
|
if (g_dbglevel >= DBG_DEBUG) DbpString("Error preparing tag response");
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime * 16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
p_response = &dynamic_response_info;
|
|
}
|
|
}
|
|
|
|
// Send response
|
|
EmSendPrecompiledCmd(p_response);
|
|
}
|
|
|
|
switch_off();
|
|
|
|
set_tracing(false);
|
|
BigBuf_free_keep_EM();
|
|
|
|
reply_ng(CMD_HF_MIFARE_SIMULATE, retval, NULL, 0);
|
|
}
|