# LF_NEDAP_SIM — Nedap RFID Simple Simulator > **Frequency:** LF (125 kHz) > **Hardware:** Generic Proxmark3 [Back to Standalone Modes Index](../../armsrc/Standalone/readme.md#individual-mode-documentation) | [Source Code](../../armsrc/Standalone/lf_nedap_sim.c) | [Development Guide](../../armsrc/Standalone/readme.md#developing-standalone-modes) --- ## What Simulates a Nedap RFID tag with a hardcoded ID. Supports both 64-bit and 128-bit Nedap formats, including proper CRC and framing. ## Why Nedap is a less common but still-deployed access control system, particularly in Europe. This mode lets you test Nedap readers by simulating a known tag. Since Nedap cards are less commonly available than HID, having a simulator is valuable for testing. ## How 1. The firmware encodes a hardcoded Nedap tag structure (subType, customerCode, id) 2. It generates the proper bit sequence with CRC calculation 3. Continuously transmits the encoded tag via LF modulation 4. Supports 128-bit "long" format when `isLong=1` Default hardcoded values: `subType=5`, `customerCode=0x123`, `id=42424`, `isLong=1` ## LED Indicators | LED | Meaning | |-----|---------| | Minimal LED usage | Simple continuous simulation mode | ## Button Controls | Action | Effect | |--------|--------| | **Hold 1000ms** | Exit standalone mode | | **USB command** | Exit standalone mode | ## State Machine ```mermaid stateDiagram-v2 [*] --> Simulate : Startup Simulate --> Simulate : Continuous transmission Simulate --> [*] : Button hold 1s / USB data ``` ## Customization To change the simulated tag, edit the hardcoded values in the source: ```c static NedapTag_t tag = { .subType = 0x5, .customerCode = 0x123, .id = 42424, .isLong = 1, }; ``` ## Compilation ``` make clean make STANDALONE=LF_NEDAP_SIM -j ./pm3-flash-fullimage ``` ## Related - [EM4100 Emulator](lf_em4100emul.md) — Simple EM4100 simulator - [Skeleton Template](lf_skeleton.md) — Template for building new LF modes