.section .startup,"ax" .syntax unified .cpu cortex-m4 .fpu softvfp .thumb /* ------------------------------------------------------------------- */ .global flashstart .type flashstart, %object flashstart: .word _stack_end .word reset .word default_handler .word default_handler .word default_handler .word default_handler .word default_handler .word 0 .word 0 .word 0 .word 0 .word default_handler .word default_handler .word 0 .word default_handler .word default_handler /* ------------------------------------------------------------------- */ .thumb_func .type reset, %function reset: /* Copy the bootrom to sram */ ldr r0, =__bootphase2_src_start__ ldr r1, =__bootphase2_start__ ldr r2, =__bootphase2_end__ 1: ldr r3, [r0], #4 str r3, [r1], #4 cmp r1, r2 blo 1b /* * DXL Note: * It is very important to ensure that the memory expansion configuration is correct before accessing the memory! * Do not use _stack_end, because this memory area may be temporarily inaccessible. * If you adjust from small sram to large sram, using _stack_end and function call will result in hardware fault. */ ldr sp, =__stack_boot_end__ bl Extend_SRAM /* Load the stack pointer(Such as _stack_end?) from the first word of the bootphase2. */ ldr sp, =_stack_end /* Reset the stack pointer once to call JumpToAnyImage. */ ldr r0, =__bootphase2_start__ ldr r0, [r0] ldr r1, =__bootphase2_start__ /* Vector table base / entry point. */ ldr r2, =JumpToAnyImage blx r2 /* ------------------------------------------------------------------- */ .thumb_func .type default_handler, %function default_handler: 1: b 1b .ltorg