# HF_15SIM — ISO15693 Dump and Simulate > **Author:** lnv42 > **Frequency:** HF (13.56 MHz) > **Hardware:** RDV4 (flash memory) [Back to Standalone Modes Index](../../armsrc/Standalone/readme.md#individual-mode-documentation) | [Source Code](../../armsrc/Standalone/hf_15sim.c) | [Development Guide](../../armsrc/Standalone/readme.md#developing-standalone-modes) --- ## What Dumps an ISO15693 tag's complete memory, then simulates it. Auto-detects tag type (MIM1024, etc.) and specific attributes like DSFID and AFI. ## Why ISO15693 tags are used in libraries, laundry systems, industrial asset tracking, and some access control. This mode enables read-then-replay attacks: capture a tag's full contents and then emulate it at a reader without the original tag present. ## How 1. **Wait**: Scans for an ISO15693 tag in the field 2. **Dump**: On detection, reads all memory blocks and tag system info (DSFID, AFI, block size) 3. **Simulate**: Begins emulating the captured tag with full memory contents ## LED Indicators | LED | Meaning | |-----|---------| | **B** (solid) | Waiting for a dumpable tag | | LEDs off | Dumping / simulating | ## Button Controls | Action | Effect | |--------|--------| | **Hold 500ms** | Exit standalone mode | | **USB command** | Exit standalone mode | ## State Machine ```mermaid stateDiagram-v2 [*] --> WaitForTag : Startup\nLED_B on WaitForTag --> DumpTag : ISO15693 tag found WaitForTag --> WaitForTag : No tag / incompatible DumpTag --> Simulate : Dump complete\n(all blocks read) DumpTag --> WaitForTag : Dump failed Simulate --> [*] : Button hold 500ms WaitForTag --> [*] : Button hold 500ms ``` ## Compilation ``` make clean make STANDALONE=HF_15SIM -j ./pm3-flash-fullimage ``` ## Related - [ISO15693 UID Emulator](hf_tmudford.md) — Simpler 15693 UID emulation - [15693 Sniffer](hf_15sniff.md) — ISO15693 protocol sniffer