//----------------------------------------------------------------------------- // Copyright (C) Proxmark3 contributors. See AUTHORS.md for details. // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // See LICENSE.txt for the text of the license. //----------------------------------------------------------------------------- // PM5 (AT32F435) mainboard buzzer - see buzzer.h. // // Wiring: PB13 = enable (push-pull), PC9 = TMR8_CH4 PWM modulation. The bring-up // sequence is the one proven by the factory QC self-test. //----------------------------------------------------------------------------- #include "buzzer.h" #include "at32f435_437.h" #include "at32f435_437_crm.h" #include "at32f435_437_gpio.h" #include "at32f435_437_tmr.h" #include "ticks_apis.h" // SpinDelay // Buzzer wiring on the PM5 mainboard. #define BUZZER_EN_GPIO GPIOB #define BUZZER_EN_PIN GPIO_PINS_13 #define BUZZER_MOD_GPIO GPIOC #define BUZZER_MOD_PIN GPIO_PINS_9 #define BUZZER_MOD_SRC GPIO_PINS_SOURCE9 #define BUZZER_MOD_MUX GPIO_MUX_3 #define BUZZER_MOD_TMR TMR8 #define BUZZER_MOD_TMR_CH TMR_SELECT_CHANNEL_4 static bool s_buzzer_ready = false; void BuzzerSetup(void) { crm_periph_clock_enable(CRM_GPIOB_PERIPH_CLOCK, TRUE); crm_periph_clock_enable(CRM_GPIOC_PERIPH_CLOCK, TRUE); crm_periph_clock_enable(CRM_TMR8_PERIPH_CLOCK, TRUE); gpio_init_type gpio_init_struct; gpio_default_para_init(&gpio_init_struct); // Enable pin (PB13): push-pull output, driven low = silent. gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER; gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL; gpio_init_struct.gpio_mode = GPIO_MODE_OUTPUT; gpio_init_struct.gpio_pins = BUZZER_EN_PIN; gpio_init_struct.gpio_pull = GPIO_PULL_NONE; gpio_init(BUZZER_EN_GPIO, &gpio_init_struct); gpio_bits_write(BUZZER_EN_GPIO, BUZZER_EN_PIN, FALSE); // Modulation pin (PC9): alternate function = TMR8_CH4. gpio_init_struct.gpio_mode = GPIO_MODE_MUX; gpio_init_struct.gpio_pins = BUZZER_MOD_PIN; gpio_init(BUZZER_MOD_GPIO, &gpio_init_struct); gpio_pin_mux_config(BUZZER_MOD_GPIO, BUZZER_MOD_SRC, BUZZER_MOD_MUX); tmr_internal_clock_set(BUZZER_MOD_TMR); tmr_reset(BUZZER_MOD_TMR); tmr_base_init(BUZZER_MOD_TMR, BUZZER_DEFAULT_PERIOD, 95); // ~2 kHz from 192 MHz tmr_output_config_type tmr_output_struct; tmr_output_default_para_init(&tmr_output_struct); tmr_output_struct.oc_mode = TMR_OUTPUT_CONTROL_PWM_MODE_A; tmr_output_struct.oc_polarity = TMR_OUTPUT_ACTIVE_HIGH; tmr_output_struct.oc_output_state = TRUE; tmr_output_channel_config(BUZZER_MOD_TMR, BUZZER_MOD_TMR_CH, &tmr_output_struct); tmr_channel_value_set(BUZZER_MOD_TMR, BUZZER_MOD_TMR_CH, BUZZER_DEFAULT_DUTY); tmr_counter_enable(BUZZER_MOD_TMR, TRUE); tmr_output_enable(BUZZER_MOD_TMR, TRUE); s_buzzer_ready = true; } void BuzzerTone(uint16_t period, uint16_t duty, uint16_t on_ms) { if (s_buzzer_ready == false) { BuzzerSetup(); } BUZZER_MOD_TMR->pr = period; tmr_channel_value_set(BUZZER_MOD_TMR, BUZZER_MOD_TMR_CH, duty); gpio_bits_write(BUZZER_EN_GPIO, BUZZER_EN_PIN, TRUE); SpinDelay(on_ms); gpio_bits_write(BUZZER_EN_GPIO, BUZZER_EN_PIN, FALSE); } void BuzzerBeep(uint16_t on_ms) { BuzzerTone(BUZZER_DEFAULT_PERIOD, BUZZER_DEFAULT_DUTY, on_ms); } void BuzzerOff(void) { if (s_buzzer_ready) { gpio_bits_write(BUZZER_EN_GPIO, BUZZER_EN_PIN, FALSE); } }