name: FPGA PM3 Build on: push: paths: - 'fpga/**' - '.github/workflows/fpga-pm3.yml' pull_request: paths: - 'fpga/**' - '.github/workflows/fpga-pm3.yml' workflow_dispatch: permissions: contents: read env: # The PM3, PM3-ULT and iCopy-X images are Spartan-II and Spartan-3E, and # WebPack ISE 10.1 is the only tool chain that places and routes them. It is a # licensed multi gigabyte install, so the build runs inside this image, the # one doc/fpga_arm_notes.md points at. Pinned by digest rather than by the # tag, which has been re-pushed since it was first published. ISE_IMAGE: nhutton/prox-container@sha256:b42abab7f88df928e59ab97ce3a557b547bc5fc967c19e49f30d7cfb8d3a5a15 jobs: build: name: Build the PM3 bitstreams runs-on: ubuntu-latest steps: - uses: actions/checkout@v7 # The image is 8 GB unpacked, so keep an eye on the runner's disk. - name: Pull the ISE image run: | df -h / docker pull "$ISE_IMAGE" - name: Build the PM3 bitstreams run: | set -euo pipefail docker run --rm -v "$PWD:/src" -w /src "$ISE_IMAGE" bash -euc ' # The image exports its PATH from ~/.bashrc, which returns early in # a non interactive shell, so name the ISE bin directory here. export PATH="$PATH:/opt/Xilinx/10.1/ISE/bin/lin" # XST cannot create its project temp directory on the mounted # volume, so build a copy inside the container and copy the # bitstreams back out over the checked out ones. rm -rf /build && mkdir /build && cp -r /src/fpga/. /build/ cd /build make all -j"$(nproc)" cp *.bit /src/fpga/ ' - name: Check the bitstreams run: | set -euo pipefail # fpga_icopyx_felica, fpga_icopyx_hf_15 and fpga_icopyx_lf have no # target of their own and stay empty; the rest must have content for t in fpga_pm3_lf fpga_pm3_hf fpga_pm3_hf_15 fpga_pm3_felica \ fpga_pm3_ult_lf fpga_pm3_ult_hf fpga_pm3_ult_hf_15 \ fpga_pm3_ult_felica fpga_icopyx_hf; do size=$(stat -c%s "fpga/$t.bit") echo "fpga/$t.bit ${size} bytes" test "$size" -gt 1000 done - uses: actions/upload-artifact@v7 with: name: fpga-pm3-bitstreams path: fpga/*.bit if-no-files-found: error