clone took negative FC and CN, and MS values above 5 and 22 bits,
without a word: MS FC 40 wrote the card of FC 8. sim let ids of 32
bits or more change the fixed bits, so --id 2147483648 simulated id 0,
and printed the shifted frame as Internal Id. The sim help example
used --cn, the option is --id, and the clone hint named lf keri read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
clone and sim accepted FC up to 999 and CN up to 99999, but the frame
holds 8 bits of FC and 16 of CN, so FC 300 wrote the card of FC 44.
The clone hint also named lf paradox read, which does not exist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A NULL TLV has no length, so a run of them swallowed the TLVs after
it. Lock and Memory Control sizes of 0 mean 256, the nibbles of their
third byte are powers of two and the Memory Control size counts bytes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The values went through uint8_t or & 0xFF, so --max 300 ran with 44
and --samples 1000 with 232. The --fs clocks stay 8-bit in the FSK
demod and are now refused above 255.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since cd5906674 the flash animation runs whatever stdout is, and a
redirected flash of fullimage.elf wrote a 7 MB log.
flash_pm3() replaced a flash error with the result of
flash_stop_flashing(), always PM3_SUCCESS, so a failed flash ended with
"All done". main() exited 0 after --flash, --dumpmem and
--reboot-to-bootloader whatever happened. dumpmem printed its negative
error code with %u.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Large GET DATA returns 61 xx. Concatenate clear 00 C0 bodies before
unwrap so 255-byte AES and 2K3DES objects print instead of exit 246.
Co-Authored-By: Cursor Grok 4.6 <noreply@cursor.com>
hf seos pacs on 2K3DES cards exited 236 with no message after mutual
auth. Print ExchangeAPDU14a failures, check mbedtls DES-CMAC without
mutating the caller key, decode SELECT 85 at its real length, and emit
short-form 85 when the cryptogram is under 128 bytes.
Co-Authored-By: Cursor Grok 4.6 <noreply@cursor.com>
Bootloader memory-dump cleanup sends CMD_PING to wake the communication
thread after clearing its run flag. The thread can be waiting for another
transmit after the dump ACK, so it sends this command before exiting.
The non-BWM bootrom does not handle CMD_PING: its default dispatch enters
Fatal(), leaving the device unresponsive even though the dump succeeded.
Use CMD_DEVICE_INFO for the wakeup instead. It is already supported by the
bootloader and used to identify it before the dump. Keep the wakeup so
closing the client does not leave the communication thread waiting.
Reproduced on PM5: the dump completed, but the following reset and device
probe failed. With only the rebuilt client changed, the same test script
passed five OS-to-bootloader, memory-dump and reset-to-OS cycles, with a
successful ping after each. No firmware was flashed for this comparison.
Built the client with AppleClang through Make, CMake and experimental_lib;
client/check passed. GCC 16 compiled the changed translation unit with
-Wall -Werror. Existing macOS linker warnings remain. The full GCC host
build was not repeated because of the previously observed Apple SDK
alignment error. Linux and Windows were not tested; this change replaces
an existing protocol command without changing platform-specific code.
Problem
The native hf mfu countertear used a device-side
CMD_HF_MFU_COUNTER_TEAROFF path with a static increment payload,
decided once per run. The pyscript mfuev1_counter_reset.py implements
the same attack with auto-calibration, a 3-phase attack loop,
per-attempt BD delay tuning (hunting) and stuck-value handling,
which the native command lacked.
Change
- rewrite the client command around the generic tear-off hook
(hw tearoff) and raw INCREASE_CNT frames, mirroring the pyscript
step by step: preflight checks, CHECK_TEARING_EVENT support gate,
targeted repair/normalize, BD sweep calibration (working delay
accepted only on 0xBD), and the DECREMENT -> PREPARE (0x00FFFF)
-> RESET phases with the same increment payloads (000100 for
decrement steps, 010000 for reset/repair)
- same delay tuning on counter movement: +1 when unchanged, -1 when
a jump exceeds 10, delay locked after a successful decrement
- remove CMD_HF_MFU_COUNTER_TEAROFF usage from the client; device
side stays untouched
- add Lua port client/luascripts/mfuev1_counter_reset.lua with the
same behaviour, using core.console capture and Enter-to-stop
- regenerate doc/commands.md and doc/commands.json
Behaviour change
Same CLI shape as the pyscript (-c/-f/--DelayBD/--Delay00, legacy
-i/-l/-s/-x options removed). Console output now matches the pyscript.
Testing
gcc warningless for client, armsrc and bootrom (RDV4). make check
green. doc regenerated with GD enabled. Verified 1:1 against the
pyscript and the new Lua port on hardware (EV1 card). Not tested
here: clang, Windows/ProxSpace and macOS. No build files are touched,
so the usual client-side review applies.
Co-Authored-By: opencode agent (GLM-5.3-Flash-Free) <noreply@opencode.ai>
Validate counter choices 0-2, treat only 0x00/0xBD as valid
CHECK_TEARING_EVENT answers, and detect NACK replies from the raw
payload, so retry logic does not mistake a NACK for a real answer.
Building the client with -march=x86-64-v3 (the CentOS/RHEL 10
baseline) fails with gcc 14:
src/emv/emvcore.c:211:24: error: writing 32 bytes into a region of
size 22 [-Werror=stringop-overflow=]
gcc vectorizes the dash fill loop in aidlist_rule() into 32-byte
stores and loses the pos + 2 < dstlen bound. The bound was correct.
Compute the dash count with the same limit and fill it with memset,
so there is no vectorized loop store to mis-size. Output is unchanged.
Reported in #3671.
Co-Authored-By: Grok Bot <noreply@users.noreply.github.com>
The cache is keyed on a hash of the graph buffer contents: the buffer has
many writers and no change counter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add an opt-in simulator probe that checks a reader's AES authentication continuation against a supplied candidate and stops before the final card response. Expose the result through the firmware protocol and etest bench command, and document the evidence and handshake scope.
Co-Authored-By: OpenAI Codex <noreply@openai.com>
New CLI command `lf cotag sim` with COTAG tag simulation implementation.
Detects COTAG reader activation sequence and emulates a COTAG tag.
Signed-off-by: andrej@towelbyte.net