Commit Graph
29 Commits
Author SHA1 Message Date
iceman1001 9caa6d6117 minor change we device now reports back EMULATOR memory size to the client. Had to bump capability version number to 11. 2026-09-14 12:16:51 +02:00
Philippe Teuwen 0cde2124c8 Replace pm3_max_cmd_data_size() by g_conn.max_cmd_data_size 2026-09-01 17:58:14 +02:00
Philippe Teuwen b69fa20233 Precompute max_cmd_data_size in TestProxmark 2026-09-01 17:58:07 +02:00
iceman1001 9e2092fc66 capabilities: report device frame size so the client can adapt
PM3_CMD_DATA_SIZE went 512 -> 624 without a capabilities bump, so a new
client connects to old firmware and every oversized command dies at the
device's length check with no message.

Append max_cmd_data_size, bump to v9. The client now accepts an older
capabilities struct - it only ever grows by appending, so an older layout
is a prefix - and defaults the frame size for pre-v9 firmware.
SendCommandNG bounds by the device value instead of the compile time one.

Also zero init capabilities_t on the device, it leaked stack bytes.
2026-08-30 20:13:38 +02:00
iceman1001 0f11c5c4d1 Phase E - dismantle MIX functionality 2026-08-29 16:50:29 +02:00
iceman1001 76181dfb8e sim module firmware is now v4.60, (sim020.bin) it adds a better drain when T=0 exits abnormal (abort). Better waiting time floor, with faster ETU which doesnt shrink with WWT.\n Changes to i2c with SDA timings, also modified the fixed msleep(100) with an idle time waiting which leads to 107 ms off from every iteration.\n Added a ATR cache to remember which TA1 was autonegotiated. This impact i2c comms speed with sim module for same card. 'smart pps' is better documented.\n The sam_common.c now also logs 61xx and GET_RESPONSE :) and generic long-form ASN-1 lengths. trace list -t 7816 now also shows rdr frames in us. \n All in all, this should lead for 'emv reader -w' to go from 5.87sec to 2.78sec. 'hf seos sam' is down to 1.92sec. 'hw ping' is down to 0.57sec. A USB round trip is down from 20.8ms to 1.3ms. It should give a snappier end user experience 2026-08-27 22:37:32 +02:00
Philippe Teuwen 7fb8927523 Fix streaming bug affecting mostly the pm5
Bug triggered with:
lf read -s 50000
hw ping

ReadLF_realtime() in lfsampling.c never knew how many samples the client wanted — for the realtime path, lf_sample_payload_t.samples was never populated on the client side, and the ARM handler in appmain.c (CMD_LF_ACQ_RAW_ADC/CMD_LF_SNIFF_RAW_ADC) ignored it anyway. So the device just streamed samples indefinitely, only checking for a stop request roughly once per 64-sample USB burst, and even after noticing it, flushed one more trailing partial burst via async_usb_write_stop().

Meanwhile the client (WaitForRawDataTimeout in comms.c) stops listening in raw mode the instant it has collected exactly the number of bytes it asked for (e.g. 50000), then switches back to normal framed-packet parsing. Since the device kept sending more bytes past that point, those extra bytes sat unread in the pipe and got misinterpreted as a PacketResponseNGPreamble/OLD-frame header, corrupting every subsequent USB exchange (hw ping, etc.) — reproducible even with a plain lf read -s 50000, no trigger/COTAG needed.

Moreover, we make sure the client doesn't stop listening, even briefly, during stream reception.
2026-08-26 20:16:46 +02:00
Niel Nielsen ec6f468f36 Add files via upload
Signed-off-by: Niel Nielsen <nieldk@gmail.com>
2026-08-26 16:07:37 +02:00
kormax 75a49716a9 Update to 'hf.field.timeout_sec' 2026-03-31 17:03:23 +03:00
kormax b443fc7723 Add 'hf.field.timeout' to prefs 2026-03-31 12:02:23 +03:00
iceman1001 4bbfc944f3 fix const params, logic, casting 2024-05-14 14:13:13 +02:00
Martijn Plak e35385fde1 Adding processor flash memory reading, viewing and writing to file.
Works when the device is running either osimage or bootloader.

- New memory reading command in osimage and bootloader.
- Extended 'hw readmem' command with length parameter, file writing and hex viewer.
- Introduced '--dumpmem' option to proxmark3 executable to support dumping from bootloader.

Simple interactive examples:
  hw readmem -f flashdump
  hw readmem -l 1024
CLI example:
  ./pm3 --dumpmem flashdump.bin

Reading from arbitrary memory ranges can be unlocked using the 'raw' option.
2024-01-22 16:40:05 +01:00
iceman1001 20eddd8250 added a thread that starts when a device is detected to be offline. It runs until it finds a device and reconnects to it. Signals the READLINE hook event and the prompt is updated to match current status. This removes the need to type "hw connect" on clients that has been compiled with READLINE lib. 2023-12-31 15:25:58 +01:00
wh201906 8fdf04fcfb Receive raw data on the client 2023-11-14 02:17:45 +08:00
wh201906 de7b6f35bc Clean up the code for timeout
Rename UART_TCP_CLIENT_RX_TIMEOUT_MS to UART_NET_CLIENT_RX_TIMEOUT_MS
Add UART_UDP_LOCAL_CLIENT_RX_TIMEOUT_MS for shorter timeout
Check if the target address is local in uart_open()
2023-10-25 23:45:23 +08:00
Philippe Teuwen c4ff847355 typo 2023-10-20 14:49:39 +02:00
iceman1001 0dc921c6b7 added the udpv6 and also try to identify when v6 is used (tcp/udp) 2023-10-20 12:51:12 +02:00
iceman1001 a35bfbb13e modified the CLI prompt to also show if TCP/UDP is used in the communication 2023-10-20 10:38:53 +02:00
Eric Betts 4c9f611141 Be more CONSTant with the parameters we will not modify 2022-01-17 14:56:47 -08:00
Philippe Teuwen 30aa7aa7d1 Adapting license headers, WIP 2022-01-08 00:40:52 +01:00
Philippe Teuwen 5fce6271ee rename typedef struct pm3_device 2021-08-21 21:41:52 +02:00
Philippe Teuwen 6a2f2b3979 rename global conn 2021-08-21 20:21:08 +02:00
Philippe Teuwen 56daa155b5 Iso7816Exchange: avoid sending systematically typeA APDUs firstly on typeB tags 2021-06-04 21:58:38 +02:00
Philippe Teuwen 11334f9440 Isolate ISO7816 select & exchange from EMVcore 2021-06-04 21:58:38 +02:00
iceman1001 feeb32b13f lf tune - added possiblity to get bar / mix / value (defaul) output of measurements. Also set in preferences 2020-12-21 01:45:03 +01:00
Philippe Teuwen eadacd82f5 SWIG experiments
Squash of the following commits (a full rebase was too hard :( )
* ef309cfdf N - SWIG: create pm3.c (5 months ago)  <Philippe Teuwen>
* 05ba6a73f N - swig pm3_device -> pm3 (5 months ago)  <Philippe Teuwen>
* d59630183 N - swig: move pm3.i (5 months ago)  <Philippe Teuwen>
* 6adcfad75 N - Fix historic make & cmake (5 months ago)  <Philippe Teuwen>
* bcbef2edf N - Fix typo with script_embedded (5 months ago)  <slurdge>
* 538ee4dab N - Better SWIG integration: autogen func & attributes (5 months ago)  <slurdge>
* 756b62466 N - SWIG: few helper scripts (5 months ago)  <Philippe Teuwen>
* 47ba4acd0 N - SWIG %extend (5 months ago)  <Philippe Teuwen>
* 21841cb9d N - simplify scripts (5 months ago)  <Philippe Teuwen>
* 78c4f7929 N - Revert "SWIG experiments: introduce context" (5 months ago)  <Philippe Teuwen>
* 1562b75fc N - SWIG experiments: introduce context (5 months ago)  <Philippe Teuwen>
* a503dfcd9 N - SWIG experiments (5 months ago)  <Philippe Teuwen>
2020-11-10 23:27:21 +01:00
Philippe Teuwen e3eb8b7401 char* port for OpenProxmark and remove global gui_serial_port_name 2020-06-02 00:49:40 +02:00
Philippe Teuwen ed1fb14f5f rework C includes in C++ 2020-05-03 12:46:46 +02:00
Bjoern Kerler 81bc0bc2b9 Reorder client src directories 2020-04-16 10:53:24 +02:00