The 1 MB block branch exists for the ARM .data section: start.c's
uncompress_data_section() reads one 4-byte length and does one
LZ4_decompress_safe(), so .data has to arrive as a single block. It was
selected by 'num_infiles == 1', which is not what tells the two callers apart.
A build that skips LF, FeliCa and ISO15693 leaves FPGA_BITSTREAMS holding just
fpga_pm3_hf.bit, so the bitstream took that same branch and was packed as one
42 kB block. get_from_fpga_combined_stream() decompresses into a
FPGA_RING_BUFFER_BYTES buffer, 16 kB since 83c3f81b1:
[#] inflate returned: -13247
[#] reset_fpga_stream failed
Before 83c3f81b1 the copy was clamped with MIN(FPGA_RING_BUFFER_BYTES, ...)
whatever buffer_size said, so the blocks came out at 30 kB and the 30 kB ring
buffer still took them. That is why the commit looks like the cause - it only
removed the clamp that was covering for the wrong branch.
Add -s for the single block case and let the FPGA path always chop at
FPGA_RING_BUFFER_BYTES, however many bitstreams went in:
4 bitstreams 169344 in -> 106933 out, byte identical to before
1 bitstream 42172 in -> 28718 out, 3 blocks 13265/13206/2247,
was 1 block of 27627
.data (-s) 14944 in -> 8786 out, byte identical to the
obj/fullimage.data.bin.z in tree
Also hand the ring buffer back when reset_fpga_stream() fails. The early
return left it allocated for the rest of the session, which is the reporter's
[#] BigBuf_size............. 48116
[#] Available memory........ 31732
48116 - 31732 is 16384, exactly FPGA_RING_BUFFER_BYTES.
No CAPABILITIES_VERSION bump: fpga_all.bit.z is objcopy'd into the same
fullimage as the decompressor that reads it, so nothing here is client facing.
Reported and correctly diagnosed by @ewangsoft.
Fixes#3599
Co-Authored-By: Claude Opus 5 (1M context)
Adds an opt-in `--rgb` flag to the continuous `hf tune` / `lf tune` commands that
mirrors the antenna tuning level on the PM5 antenna RGB LED: blue = low, green =
mid, red = high, tracking the on-screen bar so you can find coupling (e.g. an
implant) by feel without watching the screen.
The colour is computed client-side from the same per-iteration voltage / running
peak the bar uses (so it matches the bar and auto-scales), and pushed to the
device via a new dumb CMD_PM5_RGB_SET {r,g,b}. That command is handled (#ifdef
PM5) by a dedicated AT32 RGB HAL module, common_arm/rgb/{rgb_apis.h,
rgb_hw_at32.c} (RgbLedSet(), I2C controller @ 0x48), wired into the armsrc
Makefile/CMake as SRC_RGB for PM5 only - so no other platform is affected and no
hardware code lands in shared files.
Debian Forky's gcc-arm-none-eabi uses picolibc as the default C library, replacing the old newlib-nano.
Picolibc registers itself with GCC via a .specs file.
That specs file automatically injects its own picolibc.ld into every link step — unless GCC sees a user-supplied -T flag at the GCC driver level.
https://github.com/picolibc/picolibc/blob/main/doc/linking.md