Problem
The native hf mfu countertear used a device-side
CMD_HF_MFU_COUNTER_TEAROFF path with a static increment payload,
decided once per run. The pyscript mfuev1_counter_reset.py implements
the same attack with auto-calibration, a 3-phase attack loop,
per-attempt BD delay tuning (hunting) and stuck-value handling,
which the native command lacked.
Change
- rewrite the client command around the generic tear-off hook
(hw tearoff) and raw INCREASE_CNT frames, mirroring the pyscript
step by step: preflight checks, CHECK_TEARING_EVENT support gate,
targeted repair/normalize, BD sweep calibration (working delay
accepted only on 0xBD), and the DECREMENT -> PREPARE (0x00FFFF)
-> RESET phases with the same increment payloads (000100 for
decrement steps, 010000 for reset/repair)
- same delay tuning on counter movement: +1 when unchanged, -1 when
a jump exceeds 10, delay locked after a successful decrement
- remove CMD_HF_MFU_COUNTER_TEAROFF usage from the client; device
side stays untouched
- add Lua port client/luascripts/mfuev1_counter_reset.lua with the
same behaviour, using core.console capture and Enter-to-stop
- regenerate doc/commands.md and doc/commands.json
Behaviour change
Same CLI shape as the pyscript (-c/-f/--DelayBD/--Delay00, legacy
-i/-l/-s/-x options removed). Console output now matches the pyscript.
Testing
gcc warningless for client, armsrc and bootrom (RDV4). make check
green. doc regenerated with GD enabled. Verified 1:1 against the
pyscript and the new Lua port on hardware (EV1 card). Not tested
here: clang, Windows/ProxSpace and macOS. No build files are touched,
so the usual client-side review applies.
Co-Authored-By: opencode agent (GLM-5.3-Flash-Free) <noreply@opencode.ai>
One read cannot see the fault this suite is most useful for. A block that comes
back silently wrong on some reads and right on others scores the same as one
that is simply wrong, and the same as one that is fine. Read each block three
times and mark disagreement between them as `unstable`.
Where a block is wrong the same way every time, name it: `rol1`, `ror5`,
`inverted`, `inv+ror2`, `shr1`. The kind matters. A rotation says the word
boundary moved, an inversion says psk picked the opposite phase, and a shift
says a demodulation opened a bit early and padded with zero - three different
faults that want three different fixes, and all of them previously reported as
"block 3,4 bad".
Measured on a T5577 over the 21 PSK1 configurations, this turns 56 fields of
"bad" into 56 marked unstable, and on a build that has since fixed part of it,
into 24 rotations whose size tracks the bit rate - ror5 at RF/32, ror4 at RF/40,
ror2 at RF/100 - which is a fixed sample offset rather than noise, and says
where to look.
Block 1 is 00000000, which equals all of its own rotations, so a rotated read of
it cannot be told from a correct one. Noted in the header rather than changed,
since the payload is the suite's own choice.
Also corrects the header, which described block 2 as ffffffff where the script
writes aa5500ff.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The magic card notes listed "No implemented commands" for USCUID-UL,
but hf_mfu_uscuid.py and hf_mf_uscuid_prog.lua both drive these cards
(config, type, UID, signature, backdoor read/write). Document both
scripts and how to set the tag signature, and correct the script name
shown in the lua script's own usage text.
fix broken logfile location in Paxton_clone.lua - MacOS doesn't natively support -printf for the gnu "find" utility. This command seems to work just find without the printf formatting.
Signed-off-by: Cameron <9978550+NRException@users.noreply.github.com>