clone and sim encoded only 7 BCD digits of the CN and the last two
digits of the year, which the demod maps to 1961-2060, so
--cn 12345678 wrote card 2345678 and --year 1950 the year 2050.
Both values were also cut to 32 and 16 bits first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Some COTAG readers produce two ON(x),OFF(y),ON(z) activations in a row, with
a very short gap in between, but they actually listen for the card response
only after the second activation.
Real COTAG tags respond to both activations, but correctly
detect a field drop after the first ON(z) and reset.
The proxmark COTAG sim code was detecting a field drop, but due to various
delays (unnecessary settle, possible printouts) in such cases then missed
the second activation.
Fix the problematic delays. Also, optimize the activation
detection by carrying the adaptive threshold across calls.
- Implemented passive mode for COTAG sim:
- load modulation with an fc/2 subcarrier locked to the reader carrier.
- This mode is now a default as it has several advantages:
- phase coherent response,
- can detect reader field drop mid frame "transmission" and restart
immediately -- important with some readers that may drop field
early and send reactivation shortly afterwards expecting the
tag to respond there as well.
- "active tx mode" is now via CLI toggle --active: it may give better range,
but may not work with all readers.
- Improved COTAG activation sequence detection for a wider range of COTAG
readers that may vary slightly in activation sequence timings (thresholds
for the rise-to-rise mode).
Per review, drop `lf em 4x50 config`, lf_em4x50_tune.lua, the debug
capture and the doc/commands.* changes. Reader timings go back to the
upstream constants; only the RM delay is new (132 cycles, centre of
the 104-164 range that worked).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ASKDemod_ext() was called with maxErr 0. The error is most often the
cut first bit of the read, outside every frame. cmdlfgallagher.c passes
100 in the same call since dfb7eaf06, and a frame still has to pass
both checksums.
A 0xBB0314FF first block, which getnoralsyBits() notes as seen, no
longer gets the unknown bits warning. The example in the comment is
such a card, its hex column said BB0214FF.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The page check covers the Hitag 2, S and µ `wrbl`, the data check S and
µ. `htu rdbl -c` stops at the 55 blocks the reply holds, `hts -m` above
3 is refused, `ta -h` shows its help and argument errors free the
parser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Annotators, `trace extract`, `-x` and `-c` stay inside the frame, the
trace and the row buffer, `-t ht2` inside the Hitag 2 state, and frame
lengths are 16 bit wide. Topaz, FeliCa and five byte ISO14443-A frames
get the right CRC check, Topaz and iCLASS traces tell their ISO14443-A
and ISO15693 frames apart, and the SEOS, 14b, DESFire and Hitag µ
labels are corrected. Six make check expectations on the repository
traces cover the fixes.
Co-Authored-By: Claude Mythos 5.1 <noreply@anthropic.com>
demod splits the starting digit from the reserved bits, writes the
animal code as CCC NNNNNNNNNNNN, knows all 249 ISO 3166-1 countries
and shows Bio-Thermo only for the chips' exact trailer. clone and sim
refuse values the frame can't carry, sim sends the data block flag for
--extended 000000 and stops with Enter, reader also tries 125 kHz.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
lf destron sim only printed "To be implemented". It now sends the
frame that lf destron clone writes, FSK2 RF/50 as in the clone's T5577
config. Both take 5 bytes of 00-7F: clone wrote a byte above 7F
without its top bit and padded a short uid with FF of bad parity.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Remove wall-of-text comment block (moved to PR description)
- Simplify output: "Genuine" vs "Weak" per Iceman's feedback
- Remove explanatory INFO line
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The existing mfulc_fingerprint() detects known counterfeit families
(Lab401 DW, Feiju FJ8010, USCUID-UL v1/v2, Giantec GT23SC4489,
Hospitality) by their deterministic command and CRC tells, returning
early on a match. This commit adds a generic weak-PRNG catch-all for
clones that evade those fixed profiles.
mfulc_prng_test() runs on the genuine-looking fallthrough, right before
the "likely MF0ICU2" verdict. It collects RndB nonces via repeated 1A00
auth starts and flags a duplicate:
- Genuine NXP draws RndB from a hardware TRNG (2^64 space), so it
never repeats across a realistic batch.
- Giantec/USCUID use a 16-bit LFSR whose wakeup-timing seed
concentrates the observed pool to roughly 2^6.5, so a duplicate
appears within 12 authentications.
A single collision is proof of a weak PRNG. This backstop catches
weak-RNG clones, including future variants the profile table does not
know. MFULC_PRNG_SAMPLES (40) and MFULC_PRNG_CLEAR (39) are tunable.
Tested on genuine NXP MF0ULC (UID 04 1C BE 92 E7 7A 80): 40 unique
nonces, no collision, verdict "consistent with a genuine TRNG".
Ref: "BREAKMEIFYOUCAN!", eprint.iacr.org/2026/100, Section 11.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012e7xUDfDUXJQU7SWV3ULS1