13 Commits
Author SHA1 Message Date
iceman1001andClaude Opus 5.5 0fdbdbdadd HID SAM: read MIFARE Classic SE through CMD_HF_SAM_MFC
sam_mfc.c was empty and CMD_HF_SAM_MFC was a no-op. Implement the relay
the way Seader's plugin_hf_mfc_transmit does it. The SAM runs Crypto1
itself and tags each nfcSend with a format:

- 00 C0 00: plain bytes, CRC already included, parity generated
- 00 00 40 / 24 / 44: air order bit stream carrying the SAM's own parity

Answers to the latter go back in the same bit form, len + len / 8 + 1
bytes like Seader. Unlike Seader, every byte gets its real parity bit;
Seader leaves bytes 8 and on at zero. A silent card is reported to the
SAM as rfStatus 00 20, an unknown format as 00 04, Seader's codes, and
the conversation continues.

Card detected follows Seader for MIFARE Classic: protocol, CSN and SAK,
no ATQA. The card is selected without RATS.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 10:23:39 +07:00
iceman1001andClaude Opus 5.5 d2e077ded9 HID SAM: return CSN / UID and the plaintext SIO with the PACS
Seader keeps the SIO it sees on the air while the SAM reads a card, which
is what lets it write an iCLASS SR downgrade. Do the same:

- iCLASS: READ / READ4 answers from block 6 on are kept; the SIO is the
  lowest captured block holding a SEQUENCE whose DER length is covered by
  contiguous captured blocks (so a legacy block 7 that happens to start
  with 0x30 is not taken for it).
- DESFire: the ReadData of file 0x0F Seader keys on, plus 91 AF
  continuations (Seader only keeps the first frame).

A new request flag (bit 7 for CMD_HF_SAM_PICOPASS, bit 2 for
CMD_HF_SAM_SEOS) asks for a sam_ext_reply_hdr_t ahead of the SAM
response. It is only sent for a plain PACS request, so -d, --info and
--break replies are unchanged. The capture lives in .bss and the reply
is built in BigBuf to keep the RDV4 stack untouched.

Also from Seader: a DESFire EV2 answers the Seos select with a 6F 22 85 20
FCI. Hide it from the SAM as 6A 82 and add Le to the DESFire select.

sam_set_card_detected_seos() moves to sam_common.c as
sam_set_card_detected_iso14a() so the MIFARE Classic path can share it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 10:23:39 +07:00
iceman1001 be88db1b54 move clock 2026-09-01 13:34:02 +02:00
iceman1001 7488b5bb79 fix to work with different SAMs. Fixed some overflow bugs and better asn1 decoding. Also enjoys the speed up from i2c sim module. Thanks Claude 2026-08-27 01:59:33 +02:00
iceman1001 dcb474a963 added ISO 7816-3 protocol and parameter selection exchange command. wired up T=1 in device side and fixed timing issues too. Thanks Claude 2026-08-26 20:42:39 +02:00
iceman1001 7ff85b09ec remove the old SAM implementation 2026-08-20 18:34:57 +02:00
Antiklesys abe54994d2 Implemented SC operations 2026-05-11 13:54:49 +08:00
Antiklesys 7fb5716ea3 Added hf iclass sam --info
Added hf iclass sam --info command that skips any card communication command and just interacts with the SAM to return:

1- Sam Firmware Version
2- Sam Firmware ID
3- Sam Serial Number
2025-06-11 01:06:38 +08:00
Jakub Kramarz b8d5daa77b sam_common: extract payload copy procedures 2025-01-26 14:36:44 +01:00
Jakub Kramarz 15a37ef9df seos_sam: ran make style 2025-01-07 00:30:49 +01:00
Jakub Kramarz c28ddd1d56 armsrc/sam_common.c: type cleanup 2025-01-07 00:05:41 +01:00
Jakub Kramarz 472d2e9330 armsrc/sam_common.c: fix sam_append_asn1_node 2025-01-07 00:05:41 +01:00
Jakub Kramarz 661b7bad22 armsrc/sam_picopass.c: extract common routines to sam_common.c 2025-01-07 00:04:48 +01:00