sam_mfc.c was empty and CMD_HF_SAM_MFC was a no-op. Implement the relay
the way Seader's plugin_hf_mfc_transmit does it. The SAM runs Crypto1
itself and tags each nfcSend with a format:
- 00 C0 00: plain bytes, CRC already included, parity generated
- 00 00 40 / 24 / 44: air order bit stream carrying the SAM's own parity
Answers to the latter go back in the same bit form, len + len / 8 + 1
bytes like Seader. Unlike Seader, every byte gets its real parity bit;
Seader leaves bytes 8 and on at zero. A silent card is reported to the
SAM as rfStatus 00 20, an unknown format as 00 04, Seader's codes, and
the conversation continues.
Card detected follows Seader for MIFARE Classic: protocol, CSN and SAK,
no ATQA. The card is selected without RATS.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Seader keeps the SIO it sees on the air while the SAM reads a card, which
is what lets it write an iCLASS SR downgrade. Do the same:
- iCLASS: READ / READ4 answers from block 6 on are kept; the SIO is the
lowest captured block holding a SEQUENCE whose DER length is covered by
contiguous captured blocks (so a legacy block 7 that happens to start
with 0x30 is not taken for it).
- DESFire: the ReadData of file 0x0F Seader keys on, plus 91 AF
continuations (Seader only keeps the first frame).
A new request flag (bit 7 for CMD_HF_SAM_PICOPASS, bit 2 for
CMD_HF_SAM_SEOS) asks for a sam_ext_reply_hdr_t ahead of the SAM
response. It is only sent for a plain PACS request, so -d, --info and
--break replies are unchanged. The capture lives in .bss and the reply
is built in BigBuf to keep the RDV4 stack untouched.
Also from Seader: a DESFire EV2 answers the Seos select with a 6F 22 85 20
FCI. Hide it from the SAM as 6A 82 and add Le to the DESFire select.
sam_set_card_detected_seos() moves to sam_common.c as
sam_set_card_detected_iso14a() so the MIFARE Classic path can share it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
in appmain.c and cmd added.
in cmd.c and add some code for test CEP
in em4x50.c(Do not timeout--)
in em4x70.c
in emvsim.c
in epa.c
in felica.c
in felicasim.c
in felicasim.c
in hfops.c
in hfsnoop.c
in hitag2.c
in hitag_common.c(Cross-platform implementation is incomplete.)
in hitagS.c
in hitagu.c
in i2c.c(Incomplete, continue to abstract.)
in i2c_direct.c
in iclass.c
in iso14443a.c(Sniff no finish yet)
in iso14443b.c and fixed bug for st25
in iso15693.c
in legicrf.c
in legicrfsim.c
in lfadc.c(lf_count_edge_periods_ex() improved)
in lfops.c(TI tag no finish yet)
in lfsampling.c
in lfzx.c
in mifarecmd.c
in mifaredesfire.c
in mifaresim.c
in mifaresniff_disabled.c
in mifareutil.c
in pcf7931.c
in sam_xxx
in secc & seos
in start.c
in thinfilm.c
in utils
Added hf iclass sam --info command that skips any card communication command and just interacts with the SAM to return:
1- Sam Firmware Version
2- Sam Firmware ID
3- Sam Serial Number