Some COTAG readers produce two ON(x),OFF(y),ON(z) activations in a row, with
a very short gap in between, but they actually listen for the card response
only after the second activation.
Real COTAG tags respond to both activations, but correctly
detect a field drop after the first ON(z) and reset.
The proxmark COTAG sim code was detecting a field drop, but due to various
delays (unnecessary settle, possible printouts) in such cases then missed
the second activation.
Fix the problematic delays. Also, optimize the activation
detection by carrying the adaptive threshold across calls.
- Implemented passive mode for COTAG sim:
- load modulation with an fc/2 subcarrier locked to the reader carrier.
- This mode is now a default as it has several advantages:
- phase coherent response,
- can detect reader field drop mid frame "transmission" and restart
immediately -- important with some readers that may drop field
early and send reactivation shortly afterwards expecting the
tag to respond there as well.
- "active tx mode" is now via CLI toggle --active: it may give better range,
but may not work with all readers.
- Improved COTAG activation sequence detection for a wider range of COTAG
readers that may vary slightly in activation sequence timings (thresholds
for the rise-to-rise mode).
New CLI command `lf cotag sim` with COTAG tag simulation implementation.
Detects COTAG reader activation sequence and emulates a COTAG tag.
Signed-off-by: andrej@towelbyte.net
Three things that all cost memory or correctness once BigBuf is larger
than 64KB, which it already is on PM5.
BigBuf_max_traceLen() returned a uint16_t while s_bigbuf_hi is a
uint32_t. At 33272 on AT91 that is harmless; on AT32, where BigBuf runs
to several hundred kbyte, it truncates and LF sampling asks for a
fraction of the buffer that is there. Widened, along with the four
callers that assigned it straight back into a uint16_t.
BigBuf_malloc() and BigBuf_calloc() took a uint16_t chunksize, so a
request of exactly 65536 arrived as 0 and anything above wrapped. It
returned NULL for the 65536 case by accident, not by design. Both take a
uint32_t now and the guard tests the upper bound explicitly, so an
oversized request fails like any other allocation that does not fit.
The 14a tag simulation allocated its dynamic modulation buffer as a flat
512, or 4096 for ST25TA. prepare_tag_modulation() memcpy's the encoded
answer out of the ToSend buffer and tosend_stuffbit() hard caps that at
TOSEND_BUFFER_SIZE, so 1788 of ST25TA's 4096 could never be reached --
it was the largest single allocation of any tag simulation for nothing.
Meanwhile 512 is 68 bytes short of what a full 64 byte response encodes
to, at 9 bytes per byte plus 4, so those answers were refused at
modulation time.
Both are now derived from the response size and capped at what ToSend
can hold: 580 for the default tag types, 2308 for ST25TA. That also
fixes the reason the 4096 never helped -- all six call sites passed the
512 macro as max_buffer_size rather than the size actually allocated, so
ST25TA allocated 4096 and then bounds checked against 512.
Worst case for a simulation that also holds emulator memory drops from
12247 bytes of BigBuf to 10459.
Built for client, RDV4 and PM3GENERIC. Not yet run on hardware.
Co-Authored-By: Claude Opus 5 (1M context)
in appmain.c and cmd added.
in cmd.c and add some code for test CEP
in em4x50.c(Do not timeout--)
in em4x70.c
in emvsim.c
in epa.c
in felica.c
in felicasim.c
in felicasim.c
in hfops.c
in hfsnoop.c
in hitag2.c
in hitag_common.c(Cross-platform implementation is incomplete.)
in hitagS.c
in hitagu.c
in i2c.c(Incomplete, continue to abstract.)
in i2c_direct.c
in iclass.c
in iso14443a.c(Sniff no finish yet)
in iso14443b.c and fixed bug for st25
in iso15693.c
in legicrf.c
in legicrfsim.c
in lfadc.c(lf_count_edge_periods_ex() improved)
in lfops.c(TI tag no finish yet)
in lfsampling.c
in lfzx.c
in mifarecmd.c
in mifaredesfire.c
in mifaresim.c
in mifaresniff_disabled.c
in mifareutil.c
in pcf7931.c
in sam_xxx
in secc & seos
in start.c
in thinfilm.c
in utils
- "lf cotag reader": now behaves mostly the same as "lf read",
except it is dedicated for COTAG.
- It makes sure to send COTAG start sequence and to use
real time sampling mode to get enough samples.
- "lf cotag demod": Working client-side COTAG demodulation implementation
(high-low raw demod + Manchester demodulation from high/low demod).
- Now uses samples directly from g_GraphBuffer
- Supports 3 types of COTAG preamble (1 active, 2 passive), which
can start anywhere in the samples.
- Prints full 128-bits of COTAG tag data in 3 formats: raw,
groupped by nibbles, and in hex, and identifies and
prints out the card number.
Signed-off-by: andrej@towelbyte.net
* BigBuf.c: use s_ prefix for statics
* BigBuf_Clear_ext already calls clear_trace, so remove extra calls
* add some sanity checking of allocator args
* dont compare PDC_RNCR to false
Reverted 'mfr_id' to 'manufacturer_id'
Moved devices table definition to flashmem.h
Single global variable 'spi_flash_pages64k'
The local structure holding the actual device data is used in firmware.c only
difference in code:
```
text data bss dec hex filename
223189 138560 6067 367816 59cc8 ./armsrc/obj/fullimage.elf <-- c9e751d darkside: fix backdoor support
223437 138624 6075 368136 59e08 ./armsrc/obj/fullimage.elf <-- this commit
======================================
+248 +64 +8 +320
```