diff --git a/include/pm3_cmd.h b/include/pm3_cmd.h index c1b744941..e3935726f 100644 --- a/include/pm3_cmd.h +++ b/include/pm3_cmd.h @@ -504,6 +504,19 @@ typedef struct { uint8_t data[]; } PACKED smart_card_raw_t; +typedef struct { + uint8_t factory_info_version; + uint8_t ecdsa_secp256k1_signature[64]; + struct { + uint64_t unix_timestamp; + uint8_t chip_unique_id[12]; + uint32_t production_id; + uint32_t hardware_version; + uint8_t aes_key[16]; + uint8_t reserved[147]; + } PACKED info; +} PACKED proxmark5_factory_info_v1_t; + // For the bootloader #define CMD_DEVICE_INFO 0x0000 // #define CMD_SETUP_WRITE 0x0001 @@ -512,6 +525,7 @@ typedef struct { #define CMD_START_FLASH 0x0005 #define CMD_CHIP_INFO 0x0006 #define CMD_BL_VERSION 0x0007 +#define CMD_CHIP_TYPE 0x0008 #define CMD_NACK 0x00fe #define CMD_ACK 0x00ff @@ -525,6 +539,7 @@ typedef struct { #define CMD_READ_MEM 0x0106 // legacy #define CMD_READ_MEM_DOWNLOAD 0x010A #define CMD_READ_MEM_DOWNLOADED 0x010B +#define CMD_MAIN_CHIP_UNIQUEID 0x010C #define CMD_VERSION 0x0107 #define CMD_STATUS 0x0108 #define CMD_PING 0x0109 @@ -546,6 +561,7 @@ typedef struct { #define CMD_FLASHMEM_WIPE 0x0122 #define CMD_FLASHMEM_DOWNLOAD 0x0123 #define CMD_FLASHMEM_DOWNLOADED 0x0124 +// DXL: I found that this command did not seem to have been used before, so it can be used to obtain the unique ID of FLASH MEM. #define CMD_FLASHMEM_INFO 0x0125 #define CMD_FLASHMEM_SET_SPIBAUDRATE 0x0126 #define CMD_FLASHMEM_PAGES64K 0x0127 @@ -607,6 +623,15 @@ typedef struct { #define CMD_USART_TXRX 0x0162 #define CMD_USART_CONFIG 0x0163 +// PM5, Dual frequency antenna control. +#define CMD_ANT_CONTROL_WRITE 0x0170 +#define CMD_ANT_CONTROL_READ 0x0171 +// PM5, EPPROM of factory info store +#define CMD_EEPROM_FACTORY_INFO_READ 0x0172 +#define CMD_EEPROM_FACTORY_INFO_WRITE 0x0173 +// PM5, QC test for the hardware +#define CMD_PM5_QC_TEST 0x0177 + // For low-frequency tags #define CMD_LF_TI_READ 0x0202 #define CMD_LF_TI_WRITE 0x0203 @@ -798,6 +823,14 @@ typedef struct { // For direct FPGA control #define CMD_FPGA_MAJOR_MODE_OFF 0x0500 +// For fpga config bitstream +#define CMD_FPGA_BITSTREAM_CONFIG_START 0x0501 +#define CMD_FPGA_BITSTREAM_CONFIG_WRITE 0x0502 +#define CMD_FPGA_BITSTREAM_CONFIG_FINISH 0x0503 + +// For fpga set pwm output for driver voltage adjust +#define CMD_FPGA_CMD_SET_PWR_PWM_LOW_COUNT 0x0504 + // For mifare commands #define CMD_HF_MIFARE_EML_MEMCLR 0x0601 #define CMD_HF_MIFARE_EML_MEMSET 0x0602 @@ -1121,6 +1154,9 @@ typedef struct { /* Set if this device understands the read memory command */ #define DEVICE_INFO_FLAG_UNDERSTANDS_READ_MEM (1 << 7) +/* Set if this device understands the chip type command */ +#define DEVICE_INFO_FLAG_UNDERSTANDS_CHIP_TYPE (1<<8) + #define BL_VERSION_MAJOR(version) ((uint32_t)(version) >> 22) #define BL_VERSION_MINOR(version) (((uint32_t)(version) >> 12) & 0x3ff) #define BL_VERSION_PATCH(version) ((uint32_t)(version) & 0xfff)