From efc01cd2f54951e1b605fbbc907e0e1de8f675e3 Mon Sep 17 00:00:00 2001 From: Niel Nielsen Date: Thu, 3 Sep 2026 09:05:57 +0200 Subject: [PATCH] Delete armsrc/bwm wifi.h Signed-off-by: Niel Nielsen --- armsrc/bwm wifi.h | 77 ----------------------------------------------- 1 file changed, 77 deletions(-) delete mode 100644 armsrc/bwm wifi.h diff --git a/armsrc/bwm wifi.h b/armsrc/bwm wifi.h deleted file mode 100644 index 800b2a225..000000000 --- a/armsrc/bwm wifi.h +++ /dev/null @@ -1,77 +0,0 @@ -//----------------------------------------------------------------------------- -// BWM WiFi bring-up (PM5 / AT32 side). -// -// Drives the BWM ESP32 into STA + TCP-server forward mode over the existing -// app_com UART4 link, so the pm3 client can connect with `tcp::`. -// This is the request/response counterpart to bwm_forward's transparent path: -// it is used at setup time, when no PM3 traffic is being forwarded. -//----------------------------------------------------------------------------- -#ifndef BWM_WIFI_H -#define BWM_WIFI_H - -#include "common.h" - -// app_com command codes (authoritative, from BWM main/app_com_defs.h) -#define BWM_CMD_SET_TO_WIFI_DISABLE_MODE 2000 // no payload: tear down WiFi, back to BLE-only -#define BWM_CMD_SET_TO_WIFI_FORWARD_MODE 2001 // payload: 1 byte forward type (0 = TCP server) -#define BWM_CMD_GET_WIFI_CFG_IP_ADDR 2020 // resp: 3x uint32 LE {ip, netmask, gw} - -// After association the STA reports "connected" before DHCP completes, so we -// poll GET_IP until a non-zero address appears (or give up). -#ifndef BWM_WIFI_DHCP_WAIT_MS -#define BWM_WIFI_DHCP_WAIT_MS 20000 // total time to wait for a DHCP lease -#endif -#ifndef BWM_WIFI_DHCP_POLL_MS -#define BWM_WIFI_DHCP_POLL_MS 500 // gap between GET_IP polls -#endif -#define BWM_CMD_SET_WIFI_CONNECT_CFG_SSID 2023 // payload: SSID bytes -#define BWM_CMD_SET_WIFI_CONNECT_CFG_PWD 2025 // payload: password bytes -#define BWM_CMD_SET_WIFI_CFG_HOST_NAME 2021 // payload: hostname bytes (no NUL) -#define BWM_CMD_START_WIFI_CONNECT_TASK 2048 // no payload -#define BWM_CMD_GET_WIFI_CONNECT_STATUS 2050 // resp: 1 byte status -#define BWM_CMD_WAIT_FOR_WIFI_CONNECT_TASK 2051 // payload: 1 byte timeout(s); resp: {result, err_reason} -#define BWM_CMD_START_TCP_SERVER 2201 // no payload -#define BWM_CMD_SET_TCP_SERVER_PORT 2205 // payload: uint16 LE port - -#define BWM_WIFI_FORWARD_TCP_SERVER 0 // wifi_forward_type_t::WIFI_FORWARD_TCP_SERVER -#define BWM_CMD_CMD_ERROR 8091 // slave bcast: command error report - -// Low-level: send one app_com HOST_CMD and wait for its SLAVE_RESP. -// resp/resp_len may be NULL if no response payload is expected. -// Returns PM3_SUCCESS on the matching ack, PM3_EFAILED on a CMD_ERROR report, -// PM3_ETIMEOUT if no response within timeout_ms. -int bwm_cmd(uint16_t cmd, const uint8_t *req, uint16_t req_len, - uint8_t *resp, uint16_t *resp_len, uint32_t timeout_ms); - -// High-level: full STA-join + TCP-server bring-up. On success writes the -// BWM's IPv4 (host byte order, a in low byte) to *ip_out. -int bwm_wifi_forward_up(const char *ssid, const char *password, - const char *hostname, uint16_t tcp_port, uint32_t *ip_out); - -// Tear down WiFi forward mode (disconnect STA + stop TCP server, back to -// BLE-only). Persisted on the BWM so it stays off across reboots. -int bwm_wifi_forward_down(void); - -// Query current forward-mode connection state without reconfiguring. Writes the -// BWM IPv4 (host order, a in low byte; 0 if none) to *ip_out and 1/0 to -// *connected (true == has a DHCP lease). Returns PM3_EFAILED if the BWM/UART -// does not answer. -// WiFi connect state reported by --status (mirrors the ESP enum; 0xFF = off). -#define BWM_WIFI_STATE_DISCONNECTED 0 -#define BWM_WIFI_STATE_CONNECTING 1 -#define BWM_WIFI_STATE_CONNECTED 2 -#define BWM_WIFI_STATE_RECONNECT 3 -#define BWM_WIFI_STATE_STOPPED 4 -#define BWM_WIFI_STATE_OFF 0xFF -int bwm_wifi_forward_status(uint8_t *state, uint32_t *ip_out); - -// ESP OTA over the BWM UART link (no header/soldering): drives the ESP's own -// OTA commands to reflash a *working* BWM to a new ESP image. -#define BWM_CMD_OTA_BEGIN 1800 // req: u32 total size -#define BWM_CMD_OTA_WRITE 1801 // req: firmware chunk -#define BWM_CMD_OTA_END 1802 // no payload: finalize + set boot partition -int bwm_esp_ota_begin(uint32_t total_size); -int bwm_esp_ota_write(const uint8_t *data, uint16_t len); -int bwm_esp_ota_end(void); - -#endif