Merge remote-tracking branch 'origin/master' into fix-indala-fc-cn

# Conflicts:
#	CHANGELOG.md
This commit is contained in:
Gabriele Gristina committed 2026-11-07 22:18:56 +01:00
commit eea78faeeb
6 files changed
+310 -9

No files matched your search

+195 -7
View File
@@ -8105,6 +8105,177 @@ static int mfc_supercard_gen2_recovery(uint8_t items, uint8_t tracedata[FURUI_MA
return PM3_SUCCESS;
}
// super card generation 2, UID write
#define SUPER_GEN2_UID_LEN 7 // UID bytes sent, zero padded
#define SUPER_GEN2_ACK 0x11 // command accepted
#define SUPER_GEN2_COMMITTED 0x22 // halt answer
// select a super card. Clears the trace when the field is kept, so a later `hf 14a list` holds only the write
static int mfc_supercard_select(bool keep_field_on, iso14a_card_select_t *card) {
uint32_t flags = ISO14A_CONNECT | ISO14A_NO_RATS;
if (keep_field_on) {
flags |= ISO14A_NO_DISCONNECT | ISO14A_CLEARTRACE;
}
clearCommandBuffer();
SendIso14aReader(flags, NULL, 0);
PacketResponseNG resp;
uint16_t len = 0;
uint8_t sel = 0;
if (WaitForIso14aReply(&resp, 1500, &len, &sel) == false) {
return PM3_ETIMEOUT;
}
if (sel == 0) {
return PM3_ECARDEXCHANGE;
}
if (len < sizeof(iso14a_card_select_t)) {
PrintAndLogEx(FAILED, "Short select answer, %u bytes. Client and firmware out of sync?", len);
return PM3_ELENGTH;
}
memcpy(card, resp.data.asBytes, sizeof(iso14a_card_select_t));
if (card->uidlen == 0) {
return PM3_ECARDEXCHANGE;
}
return PM3_SUCCESS;
}
// one frame of the gen2 UID write. PM3_ECARDEXCHANGE when the card stayed silent,
// PM3_EWRONGANSWER when it answered and refused
static int mfc_supercard_gen2_frame(uint8_t cmd, uint8_t arg, uint8_t status) {
uint8_t data[2] = {cmd, arg};
uint32_t flags = ISO14A_RAW | ISO14A_APPEND_CRC | ISO14A_NO_DISCONNECT;
clearCommandBuffer();
SendIso14aReader(flags, data, sizeof(data));
PacketResponseNG resp;
uint16_t len = 0;
if (WaitForIso14aReply(&resp, 1500, &len, NULL) == false) {
return PM3_ETIMEOUT;
}
PrintAndLogEx(DEBUG, "%02X %02X >>> %s", cmd, arg, sprint_hex_inrow(resp.data.asBytes, len));
// the device reports a silent card as a zero length answer, not as a timeout
if (len == 0) {
return PM3_ECARDEXCHANGE;
}
// 18 byte answer on the wire, 16 byte payload plus CRC. Only the payload is required
if (len < 16) {
PrintAndLogEx(FAILED, "Short answer... %s", sprint_hex_inrow(resp.data.asBytes, len));
return PM3_ELENGTH;
}
if (resp.data.asBytes[0] != status || resp.data.asBytes[1] != arg) {
PrintAndLogEx(FAILED, "Card answered... %s, expected status %02X arg %02X",
sprint_hex_inrow(resp.data.asBytes, len), status, arg);
return PM3_EWRONGANSWER;
}
return PM3_SUCCESS;
}
// change UID on a super card generation 2. Knock, UID one byte per command,
// then HLTA, which commits - without it the card discards the write on field drop
static int mfc_supercard_gen2_set_uid(const uint8_t *uid, uint8_t uidlen) {
static const uint8_t knock[] = {0xF3, 0x2A, 0xBD, 0xEF, 0x01};
iso14a_card_select_t old_card = {0};
int res = mfc_supercard_select(true, &old_card);
if (res != PM3_SUCCESS) {
if (res == PM3_ETIMEOUT) {
PrintAndLogEx(FAILED, "Device did not answer the select command");
} else {
PrintAndLogEx(FAILED, "Failed to select card, is it on the antenna?");
}
DropField();
return res;
}
// these parts are physically 4 or 7 byte, the length is not changeable
if (old_card.uidlen != uidlen) {
PrintAndLogEx(FAILED, "Card UID is " _YELLOW_("%u") " bytes, new UID is " _YELLOW_("%u") " bytes", old_card.uidlen, uidlen);
DropField();
return PM3_EINVARG;
}
for (uint8_t i = 0; i < ARRAYLEN(knock); i++) {
res = mfc_supercard_gen2_frame(0x30, knock[i], SUPER_GEN2_ACK);
if (res != PM3_SUCCESS) {
if (res == PM3_ECARDEXCHANGE) {
PrintAndLogEx(FAILED, "Card stopped answering at knock command " _YELLOW_("%u") " of %zu", i + 1, ARRAYLEN(knock));
} else {
PrintAndLogEx(FAILED, "Card rejected knock command " _YELLOW_("%u") " of %zu", i + 1, ARRAYLEN(knock));
PrintAndLogEx(HINT, "Hint: Are you sure your card is a super card generation 2?");
}
DropField();
return res;
}
}
uint8_t new_uid[SUPER_GEN2_UID_LEN] = {0};
memcpy(new_uid, uid, uidlen);
for (uint8_t i = 0; i < SUPER_GEN2_UID_LEN; i++) {
res = mfc_supercard_gen2_frame(0x30, new_uid[i], SUPER_GEN2_ACK);
if (res != PM3_SUCCESS) {
if (res == PM3_ECARDEXCHANGE) {
PrintAndLogEx(FAILED, "Card stopped answering at UID byte " _YELLOW_("%u") " of %u, the write is incomplete", i + 1, SUPER_GEN2_UID_LEN);
PrintAndLogEx(HINT, "Hint: hold the card still on the antenna and run the command again");
} else {
PrintAndLogEx(FAILED, "Card rejected UID byte " _YELLOW_("%u") " of %u", i + 1, SUPER_GEN2_UID_LEN);
}
DropField();
return res;
}
}
// not fatal, the UID read back below decides the outcome
int res_halt = mfc_supercard_gen2_frame(0x50, 0x00, SUPER_GEN2_COMMITTED);
if (res_halt != PM3_SUCCESS) {
PrintAndLogEx(WARNING, "Card did not acknowledge the commit (%d), verifying anyway", res_halt);
}
DropField();
iso14a_card_select_t new_card = {0};
res = PM3_ETIMEOUT;
// card is writing, it ignores the first activation attempts
for (uint8_t i = 0; i < 4 && res != PM3_SUCCESS; i++) {
msleep(150);
res = mfc_supercard_select(false, &new_card);
PrintAndLogEx(DEBUG, "verify activation %u... %d", i + 1, res);
}
if (res != PM3_SUCCESS) {
PrintAndLogEx(FAILED, "Card did not answer after the commit, can't verify the new UID");
PrintAndLogEx(WARNING, "The write may still have succeeded, the card ignores activation while writing");
PrintAndLogEx(HINT, "Hint: keep the card on the antenna and run `hf 14a info`");
return PM3_EPARTIAL;
}
if (new_card.uidlen != uidlen || memcmp(new_card.uid, uid, uidlen) != 0) {
PrintAndLogEx(FAILED, "Super card UID change [ " _RED_("fail") " ]");
PrintAndLogEx(INFO, "Card UID... %s", sprint_hex(new_card.uid, new_card.uidlen));
return PM3_ESOFT;
}
PrintAndLogEx(SUCCESS, "Old UID... %s", sprint_hex(old_card.uid, old_card.uidlen));
PrintAndLogEx(SUCCESS, "New UID... %s", sprint_hex(new_card.uid, new_card.uidlen));
PrintAndLogEx(SUCCESS, "Super card UID change ( " _GREEN_("ok") " )");
return PM3_SUCCESS;
}
static int CmdHf14AMfSuperCard(const char *Cmd) {
CLIParserContext *ctx;
CLIParserInit(&ctx, "hf mf supercard",
@@ -8116,13 +8287,13 @@ static int CmdHf14AMfSuperCard(const char *Cmd) {
void *argtable[] = {
arg_param_begin,
arg_lit0("r", "reset", "Reset card"),
arg_str0("u", "uid", "<hex>", "New UID (4 hex bytes)"),
arg_str0("u", "uid", "<hex>", "New UID (4 hex bytes, or 7 on generation 2)"),
arg_lit0(NULL, "furui", "Furui detection card"),
arg_param_end
};
CLIExecWithReturn(ctx, Cmd, argtable, true);
bool reset_card = arg_get_lit(ctx, 1);
uint8_t uid[4];
uint8_t uid[7] = {0};
int uidlen = 0;
int res = CLIParamHexToBuf(arg_get_str(ctx, 2), uid, sizeof(uid), &uidlen);
bool is_furui = arg_get_lit(ctx, 3);
@@ -8130,8 +8301,13 @@ static int CmdHf14AMfSuperCard(const char *Cmd) {
CLIParserFree(ctx);
// sanity checks
if (res || (!res && uidlen && uidlen != sizeof(uid))) {
PrintAndLogEx(ERR, "UID must include 4 hex bytes");
if (res) {
PrintAndLogEx(ERR, "UID must be 4 or 7 hex bytes");
return PM3_EINVARG;
}
if (uidlen && uidlen != 4 && uidlen != 7) {
PrintAndLogEx(ERR, "UID must be 4 or 7 hex bytes. Got %d", uidlen);
return PM3_EINVARG;
}
@@ -8143,7 +8319,7 @@ static int CmdHf14AMfSuperCard(const char *Cmd) {
// no reset on super card FURUI
if (uidlen || reset_card) {
PrintAndLogEx(FAILED, "Not supported on this card");
return PM3_SUCCESS;
return PM3_ENOTIMPL;
}
// read 8 traces
@@ -8211,9 +8387,14 @@ static int CmdHf14AMfSuperCard(const char *Cmd) {
if (i == SUPER_MAX_TRACES) {
// no reset on super card generation 2.
if (uidlen || reset_card) {
if (reset_card) {
PrintAndLogEx(FAILED, "Not supported on this card");
return PM3_SUCCESS;
return PM3_ENOTIMPL;
}
// change UID on a super card generation 2
if (uidlen) {
return mfc_supercard_gen2_set_uid(uid, uidlen);
}
// recover key from collected traces
@@ -8231,6 +8412,13 @@ static int CmdHf14AMfSuperCard(const char *Cmd) {
// change UID on a super card generation 1
if (uidlen) {
// generation 1 is 4 byte UID only
if (uidlen != 4) {
PrintAndLogEx(FAILED, "Super card generation 1 UID must be 4 hex bytes");
return PM3_EINVARG;
}
keep_field_on = false;
uint8_t response[6];
int resplen = 0;
+65
View File
@@ -2028,6 +2028,69 @@ int mfu_get_version_uid(uint8_t *version, uint8_t *uid) {
return PM3_SUCCESS;
}
// Weak-PRNG backstop: RndB collision => counterfeit LFSR
#define MFULC_PRNG_SAMPLES 40
#define MFULC_PRNG_CLEAR 39
static int mfulc_prng_test(uint32_t samples) {
if (samples < 2) {
samples = 2;
}
if (samples > 64) {
samples = 64;
}
uint8_t rndb[64][8];
uint32_t got = 0;
for (uint32_t i = 0; i < samples; i++) {
iso14a_card_select_t card;
if (ul_select(&card) == false) {
continue;
}
uint8_t nonce[11] = {0x00};
int rl = ulc_requestAuthentication(nonce, sizeof(nonce));
DropField();
// response is AF || ek(RndB)[8] || CRC[2]; compare the 8-byte ek(RndB)
if (rl < 9 || nonce[0] != 0xAF) {
continue;
}
memcpy(rndb[got], &nonce[1], 8);
got++;
}
if (got < 2) {
PrintAndLogEx(INFO, "PRNG......... could not collect nonces (got %u)", got);
return PM3_ESOFT;
}
uint32_t first_dup = 0;
uint32_t dups = 0;
for (uint32_t i = 0; i < got; i++) {
for (uint32_t j = 0; j < i; j++) {
if (memcmp(rndb[i], rndb[j], 8) == 0) {
if (first_dup == 0) {
first_dup = i + 1; // 1-based draw index
}
dups++;
break;
}
}
}
if (dups > 0) {
PrintAndLogEx(SUCCESS, "PRNG......... " _RED_("Weak") " (RndB collision at %u)", first_dup);
return PM3_SUCCESS;
}
if (got >= MFULC_PRNG_CLEAR) {
PrintAndLogEx(SUCCESS, "PRNG......... " _GREEN_("Genuine"));
} else {
PrintAndLogEx(INFO, "PRNG......... inconclusive (%u/%u nonces)", got, (uint32_t)MFULC_PRNG_CLEAR);
}
return PM3_SUCCESS;
}
static int mfulc_fingerprint(void) {
iso14a_card_select_t card;
PacketResponseNG resp;
@@ -2139,6 +2202,8 @@ static int mfulc_fingerprint(void) {
}
}
}
// weak-PRNG backstop
mfulc_prng_test(MFULC_PRNG_SAMPLES);
PrintAndLogEx(INFO, "likely MF0ICU2");
DropField();
return PM3_SUCCESS;
+9 -1
View File
@@ -179,9 +179,17 @@ int CmdHfThinFilmSim(const char *Cmd) {
data[data_len++] = b1;
}
// end a simulation still running from an earlier call and drop its reply
PacketResponseNG resp;
clearCommandBuffer();
SendCommandNG(CMD_PING, NULL, 0);
if (WaitForResponseTimeout(CMD_PING, &resp, 3000) == false) {
PrintAndLogEx(WARNING, "command execution time out");
return PM3_ETIMEOUT;
}
clearCommandBuffer();
SendCommandNG(CMD_HF_THINFILM_SIMULATE, (uint8_t *)&data, data_len);
PacketResponseNG resp;
PrintAndLogEx(SUCCESS, "press " _GREEN_("pm3 button") " to abort simulation");
int ret;