From 27797fb7d3183503fb63f95549a0027b617f7d68 Mon Sep 17 00:00:00 2001 From: Tom Harkness Date: Fri, 16 Oct 2026 08:38:39 +1100 Subject: [PATCH] doc: update PM5-FLIPPER-USAGE.md with recent CEP/FAP fixes Co-Authored-By: Claude Sonnet 5 --- doc/md/PM5_Start_Here/PM5-FLIPPER-USAGE.md | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/doc/md/PM5_Start_Here/PM5-FLIPPER-USAGE.md b/doc/md/PM5_Start_Here/PM5-FLIPPER-USAGE.md index f8801f7de..bdf701079 100644 --- a/doc/md/PM5_Start_Here/PM5-FLIPPER-USAGE.md +++ b/doc/md/PM5_Start_Here/PM5-FLIPPER-USAGE.md @@ -42,6 +42,9 @@ Build as usual, CEP is available by default. (`SKIP_CEP=1` to remove CEP support - `hf`/`lf` reads in general, same as over USB, once the device's one-time FPGA bitstream step is done (see `Getting_Started_With_PM5.md`) — CEP itself doesn't block RF. +- The link survives idle periods cleanly — the FAP's idle dummy-poll bytes + (`0xFFFF` length header, no data pending) no longer trigger a false SPI + resync. ## What doesn't (yet) @@ -49,6 +52,10 @@ Build as usual, CEP is available by default. (`SKIP_CEP=1` to remove CEP support replies `PM3_EFAILED` with stale cached UID data, even though the same reader succeeds moments later over plain USB against the same tag. Firmware-side, root cause open, out of scope for the CEP transport itself. +- `CMD_MAIN_CHIP_UNIQUEID` intermittently times out on its first attempt + (Hardware Status page, occasionally slow/incomplete on first load), + always recovers on the FAP's retry. PM5 handler and FAP cache both + confirmed clean — likely a transport/timing-layer race, root cause open. --- @@ -70,3 +77,6 @@ Build as usual, CEP is available by default. (`SKIP_CEP=1` to remove CEP support - CEP uses its own reply-routing flag (`g_reply_via_cep`). - SPI bit-order/clock-phase settings are confirmed correct against real Flipper traffic (logic analyzer): MSB-first, mode 0, CS active-low. +- FAP-side: a short fast-poll window after sending a command, and blocking + deep-sleep for the life of the RX thread (fixes unreliable reads on + battery), both merged in the FAP's own repo.