Make detection threshold for ISO14443A configurable
This adds a new command "hw sethfthresh" to configure the thresholds used inside the FPGA while demodulating ISO14443A. The thresholds need to be increased on particularly noisy hardware, such as certain Chinese PM3 Easy clones.
This commit is contained in:
1 parent
a7da3f2a45
commit
dbfd8b7a6d
12 files changed
+68
-12
No files matched your search
@@ -743,6 +743,37 @@ static int CmdSetDivisor(const char *Cmd) {
|
||||
return PM3_SUCCESS;
|
||||
}
|
||||
|
||||
static int CmdSetHFThreshold(const char *Cmd) {
|
||||
|
||||
CLIParserContext *ctx;
|
||||
CLIParserInit(&ctx, "hw sethfthresh",
|
||||
"Set thresholds in HF/14a mode.",
|
||||
"hw sethfthresh -i 20 -t 7"
|
||||
);
|
||||
|
||||
void *argtable[] = {
|
||||
arg_param_begin,
|
||||
arg_int0("i", "high", "<dec>", "high threshold, used in sniff mode (def 20)"),
|
||||
arg_int0("t", "thresh", "<dec>", "threshold, used in reader mode (def 7)"),
|
||||
arg_param_end
|
||||
};
|
||||
CLIExecWithReturn(ctx, Cmd, argtable, true);
|
||||
uint8_t params[2];
|
||||
params[1] = arg_get_int_def(ctx, 1, 20);
|
||||
params[0] = arg_get_int_def(ctx, 2, 7);
|
||||
CLIParserFree(ctx);
|
||||
|
||||
if ((params[0]<1) || (params[0]>63) || (params[1]<1) || (params[1]>63)) {
|
||||
PrintAndLogEx(ERR, "Thresholds must be between " _YELLOW_("1") " and " _YELLOW_("63"));
|
||||
return PM3_EINVARG;
|
||||
}
|
||||
|
||||
clearCommandBuffer();
|
||||
SendCommandNG(CMD_HF_ISO14443A_SET_THRESHOLDS, (uint8_t *)¶ms, sizeof(params));
|
||||
PrintAndLogEx(SUCCESS, "Thresholds set.");
|
||||
return PM3_SUCCESS;
|
||||
}
|
||||
|
||||
static int CmdSetMux(const char *Cmd) {
|
||||
|
||||
CLIParserContext *ctx;
|
||||
@@ -1195,6 +1226,7 @@ static command_t CommandTable[] = {
|
||||
{"readmem", CmdReadmem, IfPm3Present, "Read from processor flash"},
|
||||
{"reset", CmdReset, IfPm3Present, "Reset the Proxmark3"},
|
||||
{"setlfdivisor", CmdSetDivisor, IfPm3Present, "Drive LF antenna at 12MHz / (divisor + 1)"},
|
||||
{"sethfthresh", CmdSetHFThreshold,IfPm3Present, "Set thresholds in HF/14a mode"},
|
||||
{"setmux", CmdSetMux, IfPm3Present, "Set the ADC mux to a specific value"},
|
||||
{"standalone", CmdStandalone, IfPm3Present, "Jump to the standalone mode"},
|
||||
{"status", CmdStatus, IfPm3Present, "Show runtime status information about the connected Proxmark3"},
|
||||
|
||||
Reference in new issue
Block a user