Refine low battery shutdown conditions
Update low battery shutdown logic to require corroboration from both voltage and SoC. Signed-off-by: Niel Nielsen <nieldk@gmail.com>
This commit is contained in:
1 parent
09bf8fb04e
commit
d49a5299b0
1 file changed
+5
-2
@@ -456,8 +456,11 @@ void bwm_lowbatt_check(void) {
|
|||||||
// Critical: voltage-primary, SoC secondary. Require BWM_SHUTDOWN_CONFIRMATIONS
|
// Critical: voltage-primary, SoC secondary. Require BWM_SHUTDOWN_CONFIRMATIONS
|
||||||
// consecutive sub-floor polls, then latch power off (same release as the
|
// consecutive sub-floor polls, then latch power off (same release as the
|
||||||
// long-press shutdown; a button press powers back on, in hardware).
|
// long-press shutdown; a button press powers back on, in hardware).
|
||||||
if ((mv <= BWM_SHUTDOWN_MV) || (soc <= BWM_SHUTDOWN_SOC_PCT)) {
|
// voltage-primary; SoC can only *corroborate* (it over-reads on an
|
||||||
if (++crit >= BWM_SHUTDOWN_CONFIRMATIONS) {
|
// uncalibrated gauge - e.g. <3% reported at 3.6 V). Never let SoC alone
|
||||||
|
// trigger power-off: require the pack to also be in the low-batt zone.
|
||||||
|
if ((mv <= BWM_SHUTDOWN_MV) ||
|
||||||
|
((soc <= BWM_SHUTDOWN_SOC_PCT) && (mv <= BWM_LOWBATT_MV))) { if (++crit >= BWM_SHUTDOWN_CONFIRMATIONS) {
|
||||||
bwm_beep_low_batt(); // final audible warning before cut-off
|
bwm_beep_low_batt(); // final audible warning before cut-off
|
||||||
LEDsoff();
|
LEDsoff();
|
||||||
Gpio_ARM_Power_ON_Low();
|
Gpio_ARM_Power_ON_Low();
|
||||||
|
|||||||
Reference in new issue
Block a user