From 180bc14d31a28d80b19d1528728538efb01c7598 Mon Sep 17 00:00:00 2001 From: Cole Munz Date: Mon, 27 Jul 2026 01:15:22 -0500 Subject: [PATCH 01/43] Fix heap out-of-bounds reads on short iCLASS dump files hf iclass eload -v, hf iclass decrypt and hf iclass eview -v all cast a loaded dump buffer to picopass_hdr_t* and print it without checking the buffer is that big. pm3_load_dump() sizes the allocation to the real file content and only clamps when it's larger than the max, never pads a short file up, so a truncated dump gives a short heap block and the print code reads past it. Same root cause as #3412, which only covered view. decrypt is the worst of the three: no -v needed, and it probes fixed offsets through block 9 - app_issuer_area, the aa1_encryption flag and block 7 inside iclass_decode_credentials(), then its own block 9 PACS/PIN check - regardless of what applimit or decryptedlen/8 claim the real block count is. Check the loaded length against what's about to be read. eload and eview skip only the unsafe verbose print so a legitimately short custom dump still uploads; decrypt refuses below 10 blocks because the credential decode always reaches block 9. Signed-off-by: Cole Munz --- client/src/cmdhficlass.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/client/src/cmdhficlass.c b/client/src/cmdhficlass.c index 23149bf70..c073be5ee 100644 --- a/client/src/cmdhficlass.c +++ b/client/src/cmdhficlass.c @@ -1937,8 +1937,12 @@ static int CmdHFiClassELoad(const char *Cmd) { } if (verbose) { - print_picopass_header((picopass_hdr_t *) dump); - print_picopass_info((picopass_hdr_t *) dump); + if (bytes_read < sizeof(picopass_hdr_t)) { + PrintAndLogEx(FAILED, "Error, dump file is too small to be a valid iCLASS dump - bytes: %zu, expected at least: %zu", bytes_read, sizeof(picopass_hdr_t)); + } else { + print_picopass_header((picopass_hdr_t *) dump); + print_picopass_info((picopass_hdr_t *) dump); + } } PrintAndLogEx(NORMAL, ""); @@ -2059,8 +2063,12 @@ static int CmdHFiClassEView(const char *Cmd) { } if (verbose) { - print_picopass_header((picopass_hdr_t *) dump); - print_picopass_info((picopass_hdr_t *) dump); + if (bytes < sizeof(picopass_hdr_t)) { + PrintAndLogEx(FAILED, "Error, only %u bytes downloaded, too small to be a valid iCLASS dump - expected at least: %zu", bytes, sizeof(picopass_hdr_t)); + } else { + print_picopass_header((picopass_hdr_t *) dump); + print_picopass_info((picopass_hdr_t *) dump); + } } PrintAndLogEx(NORMAL, ""); @@ -2326,6 +2334,18 @@ static int CmdHFiClassDecrypt(const char *Cmd) { return res; } + // Below (and in iclass_decode_credentials()) we unconditionally probe + // fixed offsets up through block 9 -- app_issuer_area (block 5), the + // aa1_encryption flag and block 7 in iclass_decode_credentials(), and + // the block 9 PACS/PIN check here -- regardless of what applimit or + // decryptedlen/8 say the "real" block count is. All 10 blocks (0-9) + // must actually be present in the loaded file before any of that runs. + if (decryptedlen < 10 * PICOPASS_BLOCK_SIZE) { + PrintAndLogEx(FAILED, "Error, dump file is too small - bytes: %zu, expected at least: %d", decryptedlen, 10 * PICOPASS_BLOCK_SIZE); + free(decrypted); + return PM3_EFILE; + } + have_file = true; } From 6e9340a48af6370294e218496c304a7e574838b0 Mon Sep 17 00:00:00 2001 From: kormax <3392860+kormax@users.noreply.github.com> Date: Sun, 2 Aug 2026 23:36:44 +0300 Subject: [PATCH 02/43] Detect and print FeliCa manufacturing time --- client/src/cmdhffelica.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/client/src/cmdhffelica.c b/client/src/cmdhffelica.c index 99a0843e0..2d85de937 100644 --- a/client/src/cmdhffelica.c +++ b/client/src/cmdhffelica.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "cmdparser.h" // command_t #include "comms.h" #include "cmdtrace.h" @@ -2397,6 +2398,18 @@ static int info_felica(bool verbose) { PrintAndLogEx(INFO, " Code......... " _GREEN_("%s"), sprint_hex_inrow(card.code, sizeof(card.code))); } PrintAndLogEx(INFO, " NFCID2....... " _GREEN_("%s"), sprint_hex_inrow(card.uid, sizeof(card.uid))); + const int16_t days_since_2000 = (int16_t)(((uint16_t)card.IDm[5] << 8) | card.IDm[4]); + const time_t felica_epoch = (time_t)946684800; // 2000-01-01 UTC + const time_t now = time(NULL); + if (days_since_2000 >= 0 && now != (time_t)-1 && now >= felica_epoch && + (time_t)days_since_2000 <= (now - felica_epoch) / 86400) { + const time_t manufacturing_time = felica_epoch + ((time_t)days_since_2000 * 86400); + const struct tm *date = gmtime(&manufacturing_time); + char date_string[11] = {0}; + if (date != NULL && strftime(date_string, sizeof(date_string), "%Y-%m-%d", date) != 0) { + PrintAndLogEx(INFO, " Mfg date..... " _GREEN_("%s"), date_string); + } + } PrintAndLogEx(INFO, "PMM............ " _YELLOW_("%s"), sprint_hex_inrow(card.PMm, sizeof(card.PMm))); PrintAndLogEx(INFO, " IC code...... " _GREEN_("%s") " ( %s )", sprint_hex_inrow(card.iccode, sizeof(card.iccode)), From 7b504e0e79547c1d85b3eff4cbda01e3e7029e8f Mon Sep 17 00:00:00 2001 From: Benjamin DELPY Date: Mon, 3 Aug 2026 12:25:27 +0200 Subject: [PATCH 03/43] =?UTF-8?q?Update=20Calypso=20operators=20for=20TAO?= =?UTF-8?q?=20/=20Orl=C3=A9ans?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Benjamin DELPY --- client/resources/calypso/operators.json | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/client/resources/calypso/operators.json b/client/resources/calypso/operators.json index 280982cd3..10be7f591 100644 --- a/client/resources/calypso/operators.json +++ b/client/resources/calypso/operators.json @@ -37,6 +37,10 @@ "id": "250091", "name": "CTS Strasbourg" }, + { + "id": "250303", + "name": "TAO / Orléans" + }, { "id": "250502", "name": "Oura", From b8d9e354d6daebb04f5096f7615305a880707723 Mon Sep 17 00:00:00 2001 From: CinderSocket Date: Fri, 7 Aug 2026 13:25:59 -0700 Subject: [PATCH 04/43] Add application proximity check selection --- client/src/cmdhfmfdes.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/client/src/cmdhfmfdes.c b/client/src/cmdhfmfdes.c index 6842baab8..874b2a0b7 100644 --- a/client/src/cmdhfmfdes.c +++ b/client/src/cmdhfmfdes.c @@ -639,7 +639,7 @@ static int CmdDesGetSessionParameters(CLIParserContext *ctx, DesfireContext_t *d return PM3_SUCCESS; } -static int DesfirePCRun(DesfireContext_t *dctx, const uint8_t proximity_key[MFDES_PC_KEY_LEN], uint8_t rounds, bool verbose) { +static int DesfirePCRun(DesfireContext_t *dctx, const uint8_t proximity_key[MFDES_PC_KEY_LEN], uint8_t rounds, bool activate_field, bool verbose) { if (dctx == NULL || proximity_key == NULL || rounds < 1 || rounds > MFDES_PC_MAX_ROUNDS) { return PM3_EINVARG; } @@ -655,7 +655,7 @@ static int DesfirePCRun(DesfireContext_t *dctx, const uint8_t proximity_key[MFDE uint8_t prepare_resp[APDU_RES_LEN] = {0}; size_t prepare_resp_len = 0; uint8_t respcode = 0xFF; - res = DesfireExchangeEx(true, dctx, MFDES_PREPARE_PC, NULL, 0, &respcode, prepare_resp, &prepare_resp_len, true, 0); + res = DesfireExchangeEx(activate_field, dctx, MFDES_PREPARE_PC, NULL, 0, &respcode, prepare_resp, &prepare_resp_len, true, 0); if (res != PM3_SUCCESS) { uint16_t sw = status(respcode); PrintAndLogEx(ERR, "Prepare proximity check command failed. Result: %d %s", res, DesfireGetErrorString(res, &sw)); @@ -4591,6 +4591,7 @@ static int CmdHF14ADesPC(const char *Cmd) { "This command uses plain communication with a dedicated 16-byte AES proximity key.", "hf mfdes pc --key 00000000000000000000000000000000\n" "hf mfdes pc --key 00112233445566778899aabbccddeeff --rounds 4\n" + "hf mfdes pc --aid 123456 --key 00112233445566778899aabbccddeeff\n" "hf mfdes pc --key 00112233445566778899aabbccddeeff -c native -a"); void *argtable[] = { @@ -4600,6 +4601,7 @@ static int CmdHF14ADesPC(const char *Cmd) { arg_str1("k", "key", "", "Key (AES-128, exactly 16 bytes)"), arg_int0("r", "rounds", "", "Number of rounds (1..8), default 8"), arg_str0("c", "ccset", "", "Communication command set (default from `hf mfdes default`)"), + arg_str0(NULL, "aid", "", "Application ID (3 hex bytes, big endian)"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); @@ -4635,6 +4637,13 @@ static int CmdHF14ADesPC(const char *Cmd) { return PM3_EINVARG; } + uint32_t appid = 0; + bool appid_present = false; + if (CLIGetUint32Hex(ctx, 6, 0, &appid, &appid_present, 3, "AID must have 3 bytes length")) { + CLIParserFree(ctx); + return PM3_EINVARG; + } + SetAPDULogging(APDULogging); CLIParserFree(ctx); @@ -4643,7 +4652,16 @@ static int CmdHF14ADesPC(const char *Cmd) { DesfireSetCommMode(&dctx, DCMPlain); DesfireSetSecureChannel(&dctx, DACNone); - int res = DesfirePCRun(&dctx, proximity_key, rounds, verbose); + int res = PM3_SUCCESS; + if (appid_present) { + res = DesfireSelectAndAuthenticateAppW(&dctx, DACNone, ISW6bAID, appid, true, verbose); + if (res != PM3_SUCCESS) { + DropField(); + return res; + } + } + + res = DesfirePCRun(&dctx, proximity_key, rounds, !appid_present, verbose); DropField(); return res; } From 809ab5b20c0d7e4b7b75d7efc43ed9a69324efd4 Mon Sep 17 00:00:00 2001 From: ry4000 <154689120+ry4000@users.noreply.github.com> Date: Sat, 8 Aug 2026 17:51:46 +1000 Subject: [PATCH 05/43] R&Y: Added static FEC key to `mfc_default_keys.dic` 1. Added a static key to the `Guest Cashless Prepaid Arcade Payment Cards` section. Signed-off-by: ry4000 <154689120+ry4000@users.noreply.github.com> --- client/dictionaries/mfc_default_keys.dic | 1 + 1 file changed, 1 insertion(+) diff --git a/client/dictionaries/mfc_default_keys.dic b/client/dictionaries/mfc_default_keys.dic index 6f3bb104e..da25f93f6 100644 --- a/client/dictionaries/mfc_default_keys.dic +++ b/client/dictionaries/mfc_default_keys.dic @@ -2259,6 +2259,7 @@ FC9418BF788B # Guest Cashless Prepaid Arcade Payment Cards 168168168168 198407157610 +248B4520504D 4E4F584D2101 4E4F584D2105 686B35333376 From 2d2207e0f680b4f1b3ba37d9c9114c00c41230f6 Mon Sep 17 00:00:00 2001 From: c-barron Date: Sat, 8 Aug 2026 11:58:15 -0700 Subject: [PATCH 06/43] Document USCUID-UL commands and fix hf_mf_uscuid_prog usage name The magic card notes listed "No implemented commands" for USCUID-UL, but hf_mfu_uscuid.py and hf_mf_uscuid_prog.lua both drive these cards (config, type, UID, signature, backdoor read/write). Document both scripts and how to set the tag signature, and correct the script name shown in the lua script's own usage text. --- CHANGELOG.md | 2 ++ client/luascripts/hf_mf_uscuid_prog.lua | 2 +- doc/magic_cards_notes.md | 21 ++++++++++++++++++++- 3 files changed, 23 insertions(+), 2 deletions(-) diff --git a/CHANGELOG.md b/CHANGELOG.md index d2f28c41e..d4cab4ea3 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -3,6 +3,8 @@ All notable changes to this project will be documented in this file. This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log... ## [unreleased][unreleased] +- Changed `magic_cards_notes.md` - documented the USCUID-UL helper scripts (`hf_mfu_uscuid` / `hf_mf_uscuid_prog`) and how to set the tag signature, replacing the outdated "No implemented commands" note (@c-barron) +- Fixed `hf_mf_uscuid_prog.lua` - corrected the script name shown in its usage text (@c-barron) - Added `hf felica seacauth1` command - Added `lf trovan` commands to support Trovan Animal ID (@iceman1001) - Added `hf mf gdmgetblk/gdmgethidblk/gdmsethidblk/gdmsetuid/gdmwipe/gdmsetsig` (@0x6r1an0y) diff --git a/client/luascripts/hf_mf_uscuid_prog.lua b/client/luascripts/hf_mf_uscuid_prog.lua index 344747f90..d0afe351e 100644 --- a/client/luascripts/hf_mf_uscuid_prog.lua +++ b/client/luascripts/hf_mf_uscuid_prog.lua @@ -44,7 +44,7 @@ example = [[ 3. script run hf_mf_uscuid_prog -S 0 ]] usage = [[ -script run hf_mf_uscuid_uid_prog [-h] [-u ] [-t] [-3] [-s ] [-w 1] [-R -B ] [-S -E ] [-g -c -b -2 -7 -d -a -n -r <0/1>] +script run hf_mf_uscuid_prog [-h] [-u ] [-t] [-3] [-s ] [-w 1] [-R -B ] [-S -E ] [-g -c -b -2 -7 -d -a -n -r <0/1>] ]] arguments = [[ -h this help diff --git a/doc/magic_cards_notes.md b/doc/magic_cards_notes.md index 6c7daaf6f..ab3163040 100644 --- a/doc/magic_cards_notes.md +++ b/doc/magic_cards_notes.md @@ -2233,7 +2233,26 @@ hf 14a raw -akb 7 40; hf 14a raw -k 43; hf 14a raw -ck A2F2000000BD; hf 14a raw ^[Top](#top) -No implemented commands at time of writing +Two helper scripts drive USCUID-UL cards: + +* `script run hf_mfu_uscuid` (Python) - read/parse config, change emulated type, set UID, set signature, and raw backdoor read/write. +* `script run hf_mf_uscuid_prog` (Lua) - equivalent functionality. See `-h` for its options. + +Backdoor operations (set UID, set signature, raw hidden-block read/write) require the gen1a backdoor to be enabled - a config block starting with `7AFF`, see the [USCUID-UL configuration guide](#uscuid-ul-configuration-guide) - and a magic wakeup to be selected: for the Python script, `--gen1a` (`40`/`43`) or `--gdm` (`20`/`23`). + +Example - write the tag signature (32 bytes / 64 hexsymbols) using the `40:43` wakeup: + +``` +script run hf_mfu_uscuid -s --gen1a +``` + +Verify with `hf mfu info` and look for `Signature verification: successful`. + +The same result can be achieved manually with raw commands (magic wakeup, then write the eight signature pages `F8`-`FF`): + +``` +hf 14a raw -akb 7 40; hf 14a raw -k 43; hf 14a raw -ck A2F8<4 bytes>; ...; hf 14a raw -c A2FF<4 bytes> +``` ### libnfc commands From 830e35cc124c2877754ec7c632170f66bc21e9a5 Mon Sep 17 00:00:00 2001 From: team-orangeBlue <63470411+team-orangeBlue@users.noreply.github.com> Date: Sun, 9 Aug 2026 16:14:01 +0300 Subject: [PATCH 07/43] Add CopyKEY M+ tags Signed-off-by: team-orangeBlue <63470411+team-orangeBlue@users.noreply.github.com> --- doc/magic_cards_notes.md | 1 + 1 file changed, 1 insertion(+) diff --git a/doc/magic_cards_notes.md b/doc/magic_cards_notes.md index 6c7daaf6f..68c6ffc47 100644 --- a/doc/magic_cards_notes.md +++ b/doc/magic_cards_notes.md @@ -783,6 +783,7 @@ Here is how the IC can be configured: * MF-8 (RU) * MF-3 (RU) - not susceptible to "field reset bug", a way to detect [OTP](#fuid) chips. * MF-3.2 (RU) - static nonce `01200145`, potentially fixed chip which can bypass Iron Logic's filters. + * M+ (CopyKEY) - chips presented as a universal alternative to more advanced Chinese ICs; only real difference is presence of rewritable sectors 16+17 and block 255 (readable after any auth) ` ### Identify From febfd5d8a3c2f7b7a551c60ee46947468f9d6db6 Mon Sep 17 00:00:00 2001 From: AliBello <69728608+AliBello@users.noreply.github.com> Date: Tue, 11 Aug 2026 18:17:10 +0200 Subject: [PATCH 08/43] Add new AID entry for OV Pas card Added new AID entry for OV Pas card in the Netherlands. Signed-off-by: AliBello <69728608+AliBello@users.noreply.github.com> --- client/resources/aidlist.json | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/client/resources/aidlist.json b/client/resources/aidlist.json index f36b82ab8..a830dc484 100644 --- a/client/resources/aidlist.json +++ b/client/resources/aidlist.json @@ -3715,6 +3715,17 @@ "android://eu.sharry.swp.sharryworkplace" ] }, + { + "AID": "A0000007800007", + "Vendor": "Translink systems", + "Country": "The Netherlands", + "Name": "OV Pas", + "Description": "New card for Dutch transit system, closed-loop EMV replacement of the MIFARE Classic 4K OV-Chipkaart", + "Type": "transport", + "Sources": [ + "https://blog.mobielstraat.nl/quick-look-at-the-new-ov-pas" + ] + }, { "AID": "A0000000791000", "Vendor": "HID Global", From 4ec26b59b6c88605d80d9d621ea9196b3cf2c763 Mon Sep 17 00:00:00 2001 From: Akury83 <87064827+Akury83@users.noreply.github.com> Date: Fri, 14 Aug 2026 13:12:28 +1000 Subject: [PATCH 09/43] Update aid_desfire.json Signed-off-by: Akury83 <87064827+Akury83@users.noreply.github.com> --- client/resources/aid_desfire.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/client/resources/aid_desfire.json b/client/resources/aid_desfire.json index f6d41e15f..566204ee2 100644 --- a/client/resources/aid_desfire.json +++ b/client/resources/aid_desfire.json @@ -251,7 +251,7 @@ "AID": "F47300", "Vendor": "Inner Range Pty Ltd", "Country": "AU", - "Name": "SIFER-P / SIFER-U Credential", + "Name": "SIFER-P / SIFER-U / SIFER-C Credential", "Description": "Inner Range Access Control", "Type": "pacs" }, From 4fd935c974aae60b7e7013dc5fd0f8520a6ae163 Mon Sep 17 00:00:00 2001 From: kormax <3392860+kormax@users.noreply.github.com> Date: Fri, 14 Aug 2026 18:15:51 +0300 Subject: [PATCH 10/43] Introduce FeliCa mobile device model detection to 'hf felica info' --- ...lica_container_issue_information_list.json | 2162 +++++++++++++++++ client/src/cmdhffelica.c | 106 +- 2 files changed, 2264 insertions(+), 4 deletions(-) create mode 100644 client/resources/felica/felica_container_issue_information_list.json diff --git a/client/resources/felica/felica_container_issue_information_list.json b/client/resources/felica/felica_container_issue_information_list.json new file mode 100644 index 000000000..3235d6e5c --- /dev/null +++ b/client/resources/felica/felica_container_issue_information_list.json @@ -0,0 +1,2162 @@ +[ + { + "name": "Google Pixel 3", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007001", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google/7bc30dbbb0f010a9d2c8b77285ad7f99089a716f/blueline/proprietary/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 3 XL", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007002", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google/7bc30dbbb0f010a9d2c8b77285ad7f99089a716f/crosshatch/proprietary/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 3a XL", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007003", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google/7bc30dbbb0f010a9d2c8b77285ad7f99089a716f/bonito/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Android-Dumps/google/bonito/-/raw/af378178a63a66ee1a7e535fddff740f2d52bf31/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 3a", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007004", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google/7bc30dbbb0f010a9d2c8b77285ad7f99089a716f/sargo/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Android-Dumps/google/sargo/-/raw/252c35161f17cee2ae12b17b2f81952a6ec9ab23/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 4 XL", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007005", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google/7bc30dbbb0f010a9d2c8b77285ad7f99089a716f/coral/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Android-Dumps/google/coral/-/raw/1228599f98b375349130a424658b560803167cf5/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 4", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007006", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google/7bc30dbbb0f010a9d2c8b77285ad7f99089a716f/flame/proprietary/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 4a", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007007", + "sources": [ + "https://raw.githubusercontent.com/leddaz-dump-stash/google_sunfish_dump/5aeffe419aa1e98ecd716507b62f696c61a38458/product/etc/felica/common.cfg", + "https://gitlab.com/Android-Dumps/google/sunfish/-/raw/db5ef689bed531c9ed6a2a6432b01873b9a071f4/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 4a (5G)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007008", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google/7bc30dbbb0f010a9d2c8b77285ad7f99089a716f/bramble/proprietary/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 5", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007009", + "sources": [ + "https://raw.githubusercontent.com/leddaz-dump-stash/google_redfin_dump/db6aeb0b463c9b47cfa55ce41dd2bb5622bd9499/product/etc/felica/common.cfg", + "https://gitlab.com/nateomg187/google_redfin_dump_30350/-/raw/63b920cb427219096c441f5644cd01652fce2af1/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 5a (5G)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007010", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google/7bc30dbbb0f010a9d2c8b77285ad7f99089a716f/barbet/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Android-Dumps/google/barbet/-/raw/257551769079a62e572b5107463a79dadab3591c/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 6", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007011", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_oriole/aaf170e50b1f9a7bffdf08bc5a13be7598bd7311/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/oriole/-/raw/fddcecbe75f1623c91f6a7cf0630797260ecb176/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 6 Pro", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007012", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_raven/e59f76dc7fc2df0c81a48beb5f934082cce1278c/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/raven/-/raw/69ccbe9ab9c0f8d8639420bf25df84b3f4937c65/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 6a", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007014", + "sources": [ + "https://raw.githubusercontent.com/Klozz/google_bluejay_dump/a5268397676544f2236b3b83a7dd7cc01d537041/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/bluejay/-/raw/64b6c44fffe2c9647ce346d81a5a69cd88e2e299/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 7", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007015", + "sources": [ + "https://raw.githubusercontent.com/Klozz/google_panther_dump/fd7027dd250f2aa6236627ee5ca19d288e268cd6/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/panther/-/raw/a84bbbe80b9696df85739b42d8aeaa93991e720e/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 7 Pro", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007016", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_cheetah/4d5a8741da365bb99e46956b19b3694001b9018a/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/cheetah/-/raw/9abc4494928dbb01c61669a52fc3eb32b7211267/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 7a", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007017", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_lynx/0ef7cc270c7eb1a016a3e15b485edf1eb82ec4c9/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/lynx/-/raw/88cc31abd09c1286f13910b116ea95cc565fe2e8/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel Fold", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007018", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_felix/f727917855e1c957eeee0ed27673bd1a712022f9/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/felix/-/raw/805eedce0478c25eb0142162fa1b22bc1623843c/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 8 Pro", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007019", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_husky/0ccc8396943ef48ac99c7657d3e790ab5c2f9704/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/sarthaks-dumps/google/husky_005433/-/raw/9fba80274b975f4bbccb1594d75c0e6d405ceb0a/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 8", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007020", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_shiba/0e5433db35dd3efd8680531dd45cc9319346f71c/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/shiba/-/raw/60b59e91c068c22fd46fc6d0f70ccc83694f77ee/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 8a", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007021", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_akita/ff6bd2e5251da58f29bacabeceb0d19aa7e612fd/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/akita/-/raw/2ac9a18d2e3e04b2ab298ec207e6882347744c09/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 9 Pro Fold", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007022", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_comet/3d0e1bab5ceed70390c34453f9996073914751b1/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/comet/-/raw/199bcd4ef723c0d84102dc2f2583462704de12c1/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 9 Pro XL", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007023", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_komodo/7b2a7a89a7605a71b61a913596b7b0320853d867/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/komodo/-/raw/81cdbfb70db974d69b30d45e8506be4995d155ac/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 9 Pro", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007024", + "sources": [ + "https://raw.githubusercontent.com/gm-stuffs/google_caiman_dump/b708779d6a8e250267332b77e220266eeb5291cf/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/caiman/-/raw/ddc2b6437a6c7ab5ce8a3253dfbee2fb80ca710d/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 9", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007025", + "sources": [ + "https://raw.githubusercontent.com/TheMuppets/proprietary_vendor_google_tokay/d33a7be49517d4763d1238d715e14cf3edc9f543/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/tokay/-/raw/d594083ef841ef08f4625b8214e8682779dcabb0/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 9a", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007026", + "sources": [ + "https://raw.githubusercontent.com/gm-stuffs/google_tegu_dump/0f0ac378cde550d217949e32ca4f87240b664e1e/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/tegu/-/raw/22c27417b7c8fe97cff631a19f11c9d855dcedd6/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 10 Pro Fold", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007027", + "sources": [ + "https://raw.githubusercontent.com/Jiovanni-dump/google_rango_dump/465901973be4234fb33dc205381c3653a82c1488/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/google/rango/-/raw/6a63ee188e1599a6b3cefb02a9cd519b92891261/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 10", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007028", + "sources": [ + "https://raw.githubusercontent.com/Klozz/google_frankel_dump/0a262d9b538a2bafee7729c865122559f8ee38be/product/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/GOOGLE/frankel/-/raw/b46c6b143310ddba2c0b05928e45b49c29efe7b4/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 10 Pro", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007029", + "sources": [ + "https://raw.githubusercontent.com/306bobby-android/blazer-dump/c28b401672ba002592d514eac9254b3205787ce0/product/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/GOOGLE/blazer/-/raw/342aab98e32a5498fe59f0d2e91f353d8a63c44a/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 10 Pro XL", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007030", + "sources": [ + "https://raw.githubusercontent.com/gm-stuffs/google_mustang_dump/12c4fb58093a30da53829e7aeb36589e3754ef9c/product/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/GOOGLE/mustang/-/raw/84d26413f401519bcd3645cb88d0b7e8172748a7/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel 10a", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007031", + "sources": [ + "https://raw.githubusercontent.com/SLEZxE-dumps/google_stallion_dump/28a148203a21e6ea04e19c765fb4fea232170f98/product/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/GOOGLE/stallion/-/raw/6aa46b8d254d6ea095685aa170726c53f2a112af/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel Watch (LTE)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A01001", + "sources": [ + "https://raw.githubusercontent.com/leddaz-dump-stash/google_r11_dump/0a6e8628cfe1dc702c462fa689d5f9b2bbb143e9/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel Watch (WiFi)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A01002", + "sources": [ + "https://raw.githubusercontent.com/leddaz-dump-stash/google_r11btwifi_dump/692106268dec4af1a81a97fbe7403e760a56d2a5/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel Watch 2 (WiFi)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A01003", + "sources": [ + "https://raw.githubusercontent.com/leddaz-dump-stash/google_aurora_dump/b441e0de94920ad509e4258bf98383d687bc38b2/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel Watch 2 (LTE)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A01004", + "sources": [ + "https://raw.githubusercontent.com/leddaz-dump-stash/google_eos_dump/3f7a5d367a7442afd601e8721a650fcf7d103e12/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel Watch 3 (LTE, 41/45)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A01005", + "sources": [ + "https://raw.githubusercontent.com/WOA-Project/firmware_oem_pixel_watch_seluna/6988350e6a0717fcfd497d08b3542ef3d61f24a2/extracted/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel Watch 3 (WiFi, 41/45)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A01007", + "sources": [ + "https://raw.githubusercontent.com/WOA-Project/firmware_oem_pixel_watch_solios/a22259302f6f6901a1e8f87e4fb371d5d4a96ef4/extracted/product/etc/felica/common.cfg" + ] + }, + { + "name": "Google Pixel Watch 4 (WiFi, 41/45)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A01009", + "sources": [ + "https://dl.google.com/dl/android/aosp/menari_btwifi-cp2a.260603.001.s1-factory-afc3f5c3.zip" + ] + }, + { + "name": "Google Pixel Watch 4 (LTE, 41/45)", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A01010", + "sources": [ + "https://dl.google.com/dl/android/aosp/menari_lte-cp2a.260603.001-factory-4e10d715.zip" + ] + }, + { + "name": "Nothing Phone (2a) / Nothing Phone (2a) Plus", + "model": "A142 / A142P", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "018001", + "sources": [ + "https://raw.githubusercontent.com/RandomPush/nothing_pacman_dump/084b0d9eab7eb3f4b391d2bb0a23856434d6b944/vendor/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/NOTHING/PacmanPro/-/raw/b6bb108886d5317dc5095444abc4270ef8279d8b/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Nothing Phone (3a) / Nothing Phone (3a) Pro", + "model": "A059 / A059P", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "018002", + "sources": [ + "https://raw.githubusercontent.com/leddaz-dump-stash/nothing_asteroids_dump/6c10386180c83031c983f569c3c956ebfe8a9c27/vendor/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/NOTHING/Asteroids/-/raw/ff2fe7d3a8ffd74cc594309c637bc50405dfd09e/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Nothing Phone (3)", + "model": "A024", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "018003", + "sources": [ + "https://raw.githubusercontent.com/PHATWalrus/android_vendor_nothing_metroid/8251ed72176dee64ff255247146c3da8dcb25f39/proprietary/vendor/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/NOTHING/Metroid/-/raw/2e8194e858594f0bde64c257c752f5fd55720a75/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "CMF Phone 2 Pro", + "model": "A001", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "018004", + "sources": [ + "https://gitlab.com/noescape-firmware-dumps/NOTHING/Galaga/-/raw/d1ab9154d7979dee9b72648822d338c91ee4acf4/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Nothing Phone (3a) Lite", + "model": "A001T", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "018005", + "sources": [ + "https://gitlab.com/noescape-firmware-dumps/NOTHING/Galaxian/-/raw/564164e681b9acb84047b64e19f5eff3466060ba/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Nothing Phone (4a)", + "model": "A069", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "018006", + "sources": [ + "https://raw.githubusercontent.com/FroggerSpace/proprietary_vendor_nothing_frogger/a0a1ee9c981601d167f63ca19b4479185d3c57f3/proprietary/vendor/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/NOTHING/Frogger/-/raw/245e6bf43a7e4274bd1cfc0f1e62c35e383c9590/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Nothing Phone (4a) Pro", + "model": "A069P", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "018007", + "sources": [ + "https://gitlab.com/noescape-firmware-dumps/NOTHING/FroggerPro/-/raw/16b603f807ba4def7df360e8a876a52a24ed5da5/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Nothing Phone (4b)", + "model": "A009P", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "018008", + "sources": [ + "https://gitlab.com/noescape-firmware-dumps/NOTHING/SuperContra/-/raw/e1bed26916ce2cb168709a47005b2a478076e124/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Zenfone 8", + "model": "ZS590KS", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014001", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/asus/ASUS_I006D/-/raw/8c31d9a0ffc75a2a45d0ed21ecafdbd2801c456f/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Zenfone 9", + "model": "AI2202", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014002", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/asus/ASUS_AI2202/-/raw/692c1811829322535d6f9e9e80f44bc29c59ac36/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Zenfone 10", + "model": "AI2302", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014003", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/asus/ASUS_AI2302/-/raw/f133f14e194ceb7a23aaebb3ec2c696830733b3f/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "ROG Phone 8", + "model": "ASUS_AI2401_C", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014004", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/asus/ASUS_AI2401/-/raw/336c7d9256c347cf8f9b362adf301275328c28de/vendor/etc/felica/ASUS_AI2401_C/common.cfg" + ] + }, + { + "name": "ROG Phone 8 Pro / Pro Edition", + "model": "ASUS_AI2401_D", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014005", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/asus/ASUS_AI2401/-/raw/336c7d9256c347cf8f9b362adf301275328c28de/vendor/etc/felica/ASUS_AI2401_D/common.cfg" + ] + }, + { + "name": "Zenfone 11 Ultra", + "model": "ASUS_AI2401_H", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014006", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/asus/ASUS_AI2401/-/raw/336c7d9256c347cf8f9b362adf301275328c28de/vendor/etc/felica/ASUS_AI2401_H/common.cfg" + ] + }, + { + "name": "ROG Phone 9", + "model": "ASUSAI2501B", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014007", + "sources": [ + "https://raw.githubusercontent.com/Jiovanni-dump/asus_asusai2501_dump/62f32bc581bb3ada8926e7be17dd553fc3ec8cd7/vendor/etc/felica/ASUSAI2501B/common.cfg", + "https://dumps.tadiphone.dev/api/v4/projects/5497/repository/files/vendor%2Fetc%2Ffelica%2FASUSAI2501B%2Fcommon.cfg/raw?ref=qssi_64-user-16-BQ2A.250525.001-36.0810.1810.43-0-release-keys" + ] + }, + { + "name": "ROG Phone 9 Pro / Pro Edition", + "model": "ASUSAI2501C", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014008", + "sources": [ + "https://raw.githubusercontent.com/Jiovanni-dump/asus_asusai2501_dump/62f32bc581bb3ada8926e7be17dd553fc3ec8cd7/vendor/etc/felica/ASUSAI2501C/common.cfg", + "https://dumps.tadiphone.dev/api/v4/projects/5497/repository/files/vendor%2Fetc%2Ffelica%2FASUSAI2501C%2Fcommon.cfg/raw?ref=qssi_64-user-16-BQ2A.250525.001-36.0810.1810.43-0-release-keys" + ] + }, + { + "name": "Zenfone 12 Ultra", + "model": "ASUSAI2501H", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "014009", + "sources": [ + "https://raw.githubusercontent.com/Jiovanni-dump/asus_asusai2501_dump/62f32bc581bb3ada8926e7be17dd553fc3ec8cd7/vendor/etc/felica/ASUSAI2501H/common.cfg", + "https://dumps.tadiphone.dev/api/v4/projects/5497/repository/files/vendor%2Fetc%2Ffelica%2FASUSAI2501H%2Fcommon.cfg/raw?ref=qssi_64-user-16-BQ2A.250525.001-36.0810.1810.43-0-release-keys" + ] + }, + { + "name": "moto g52j 5G", + "model": "XT2219-1", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016001", + "sources": [ + "https://raw.githubusercontent.com/nattolecats/vendor_motorola_felica/372698b86d9c5e350ed5a57b21982288357f729f/blobs/product/etc/felica/common.cfg" + ] + }, + { + "name": "moto g53j 5G / moto g84 5G", + "model": "XT2335-5 / XT2347-2", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016002", + "sources": [ + "https://raw.githubusercontent.com/nattolecats/vendor_motorola_felica/6c37ab39705e56174f235c609ec8cddab5f5fed7/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/MOTOROLA/bangkk/-/raw/8920b858cfa12b6a7f5b7f20ad6f5dfa716409be/product/etc/felica/common.cfg" + ] + }, + { + "name": "motorola edge 40", + "model": "XT2303-3", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016003", + "sources": [ + "https://raw.githubusercontent.com/motorola-lyriq-dev/motorola_lyriq_dump/14ef73dfaffc0b54c1d80a4abfd9c7fb4361e882/product/etc/felica/common.cfg", + "https://gitlab.com/Android-Dumps/motorola/lyriq/-/raw/12989918d43fc304ff34bc04e780ff325517b9c1/product/etc/felica/common.cfg" + ] + }, + { + "name": "motorola razr 40", + "model": "XT2323-4", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016004", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/motorola/lynkco/-/raw/290a3f0fc633507a50d82999e56027f7758b140f/product/etc/felica/common.cfg" + ] + }, + { + "name": "moto g54 5G", + "model": "XT2343-4", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016005", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/4425/repository/files/product%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=user-13-SQ1A.220105.002-1449d9-release-keys" + ] + }, + { + "name": "motorola edge 40 neo", + "model": "XT2307-3", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016006", + "sources": [ + "https://gitlab.com/shibushaji199818/android_dump_motorola_manaus/-/raw/35a773de64fdf7d5ad1bff16b2ca8c91ebd70e6a/product/etc/felica/common.cfg" + ] + }, + { + "name": "motorola edge 50 pro", + "model": "XT2403-4", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016007", + "sources": [ + "https://raw.githubusercontent.com/Jiovanni-dump/motorola_eqe_dump/23a3b6d29aafb3a9aa7bf39575f5d88d0a806f0a/product/etc/felica/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/motorola/eqe/-/raw/ee22c20346987b74412e8c662f93d2b3e2c41526/product/etc/felica/common.cfg" + ] + }, + { + "name": "moto g64 5G", + "model": "XT2431-3", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016008", + "sources": [ + "https://raw.githubusercontent.com/ussr1674/device_motorola_cancunf/45c5e9b10bf7e6cb4c3ba66e97420f5434943fbf/configs/felica/retjp/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/MOTOROLA/cancunf/-/raw/4ff1e55f97a9bf87e898fb3838c22811f5ddf6c8/product/etc/felica/common.cfg" + ] + }, + { + "name": "motorola razr 50", + "model": "XT2453-9", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016009", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/motorola/aito/-/raw/d74f2b4de1b39d82bb8d9ca4280704eec4a797a7/product/etc/felica_aito/common.cfg" + ] + }, + { + "name": "motorola razr 50 ultra", + "model": "XT2451-5 / A404MO", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016010", + "sources": [ + "https://mirrors.lolinet.com/firmware/lenomola/2024/arcfox/official/Softbank/XT2451-5_ARCFOX_SOFTBANK_15_V2UXS35.47-37-6-7_subsidy-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip", + "https://gitlab.com/SavedByLight/android_dump_motorola_arcfox/-/raw/c08438af5401df95711f61645d41d2f623353f9e/product/etc/felica/common.cfg" + ] + }, + { + "name": "moto g66j 5G / moto g66y 5G", + "model": "XT2529-3 / A501MO", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016011", + "sources": [ + "https://gitlab.com/sarthaks-dumps/motorola/bogota_013100/-/raw/438efe6eec30920b032b128e75542de880a924df/product/etc/felica/common.cfg" + ] + }, + { + "name": "motorola edge 60 pro", + "model": "XT2507-6", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016012", + "sources": [ + "https://raw.githubusercontent.com/rahulsnair/android_device_motorola_cybert/19e2a7d00a2ad1689d46bad9a0a3ee5bb5a003e2/configs/felica_docomo/common.cfg", + "https://gitlab.com/Van-Firmware-Dumps/motorola/cybert/-/raw/0e2b7bdb5596d0e4851f1c3654ada401f6a73aab/product/etc/felica/common.cfg" + ] + }, + { + "name": "motorola razr 60", + "model": "XT2553-8", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016013", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/motorola/aito/-/raw/d74f2b4de1b39d82bb8d9ca4280704eec4a797a7/product/etc/felica_aito25/common.cfg" + ] + }, + { + "name": "motorola razr 60 ultra", + "model": "XT2551-7", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016014", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/5637/repository/files/product%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=user-15-VVL35V.42-60-ST3.5-f8cee2-release-keys" + ] + }, + { + "name": "motorola edge 60", + "model": "XT2505-5", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016015", + "sources": [ + "https://gitlab.com/fw-dumps/motorola/scout/-/raw/b5579ec6b8fa682b25c148c0316bb8f5f4ab427c/product/etc/felica/common.cfg" + ] + }, + { + "name": "moto g37j", + "model": "XT2625-9", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "016016", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/motorola/sydney/-/raw/e5f31b13b90d23e64c38e31e425afceae53089e6/product/etc/felica/common.cfg" + ] + }, + { + "name": "moto g64y 5G", + "model": "A401MO", + "carrier": "Y!mobile", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "A401MO", + "sources": [ + "https://mirrors.lolinet.com/firmware/lenomola/2024/cancunp/official/YMOBILE/XT2431-2_CANCUNF_AP_YMOBILE_15_V1TDJS35H.83-20-6-3_subsidy-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip", + "https://raw.githubusercontent.com/ussr1674/device_motorola_cancunf/45c5e9b10bf7e6cb4c3ba66e97420f5434943fbf/configs/felica/ymobile/common.cfg", + "https://gitlab.com/sarthaks-dumps/motorola/cancunf_030928/-/raw/7fbe014e8bcdaaa877f30ec0ed24b643e677e26d/product/etc/felica_ymobile/common.cfg" + ] + }, + { + "name": "moto g53y 5G", + "model": "A301MO", + "carrier": "Y!mobile", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "motog53y5G", + "sources": [ + "https://mirrors.lolinet.com/firmware/lenomola/2023/penang/official/Softbank/XT2335-4_PENANG_SOFTBANK_14_U1TPJS34.29-83-6-3-9_subsidy-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip", + "https://raw.githubusercontent.com/Moto-Sedona/android_device_motorola_penang/f4f3472ddf8272e827af5877e9e0cd7419969939/configs/felica_sb/common.cfg", + "https://gitlab.com/yoshi3jp/android_dump_motorola_penang/-/raw/5e0c869e9ab52ef265defa0c576ba976943779f2/product/etc/felica/common.cfg" + ] + }, + { + "name": "motorola edge 50s pro", + "model": "A402MO", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "A402MO", + "sources": [ + "https://mirrors.lolinet.com/firmware/lenomola/2024/eqe/official/Softbank/XT2403-5_EQE_SOFTBANK_15_V1UMS35H.10-67-1-7_subsidy-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip", + "https://raw.githubusercontent.com/moto-sm7550-dev/android_device_motorola_eqe/a07484d38f0dd60fe4d4fc4f201ddb143987543f/configs/felica_sb/common.cfg" + ] + }, + { + "name": "Mi 11 Lite 5G", + "model": "M2101K9R", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013001", + "sources": [ + "https://raw.githubusercontent.com/Failedmush/Vendor-xiaomi-renoir/1aa43accfae269be6e17540089cdeb2371d27415/proprietary/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Xiaomi 11T Pro", + "model": "2107113SR", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013002", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-vili-jp-felica/5af6bf0e48a991004f50d948cc0e985e0fa45e09/system/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Redmi Note 10T", + "model": "22021119KR / A101XM", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013003", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-lilac-jp-felica/0af9e8fcfe108366ec7145653549b5338d3fc978/system/etc/felica/common.cfg" + ] + }, + { + "name": "Redmi Note 11 Pro 5G", + "model": "2201116SR", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013004", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-veux-jp-felica/42d3fa5e2532fc8c32ba69939aa5c1a47492f73b/system/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Xiaomi 12T Pro", + "model": "22081212R", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013005", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-diting-jp-felica/a43621c12384008da50989b296e672e383d952ff/system/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Redmi 12 5G", + "model": "23076RA4BR", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013006", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-sky-jp-felica/f751aacc6e2f3fb3a60cfcdaab58b7bd8ba7742a/system/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Redmi Note 13 Pro+ 5G", + "model": "24040RA98R", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013009", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-zircon-jp-felica/37d2c443ead80f46c79d919abe9a43833f136561/system/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Xiaomi 14T Pro", + "model": "2407FPN8ER / A402XM", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013010", + "sources": [ + "https://raw.githubusercontent.com/Jiovanni-dump/xiaomi_mgvi_64_armv82_dump/ba38f07f459edf957af4c8e80d6fac6f6cb1bf5c/product/etc/felica/common.cfg", + "https://gitlab.com/clexan/firmware_dump_rothko/-/raw/881c89179945b6a741f469a10adcf3b1d6d6cc0c/product/etc/felica/common.cfg" + ] + }, + { + "name": "Redmi 15 5G", + "model": "25057RN09R / A501XM", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013011", + "sources": [ + "https://raw.githubusercontent.com/Jiovanni-dump/redmi_spring_dump/5fa9f589c0fc22638fa44f902b815f36d35473fb/product/etc/felica/common.cfg", + "https://gitlab.com/noescape-firmware-dumps/REDMI/spring/-/raw/b5801107ff7fe231c40cd057cbc4689a2e38a4ce/product/etc/felica/common.cfg" + ] + }, + { + "name": "Xiaomi 15T Pro", + "model": "2506BPN68R", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013012", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/xiaomi/klimt/-/raw/7ddf57421406c1f94d858b60e060911f0e0eb7a3/product/etc/felica/common.cfg" + ] + }, + { + "name": "REDMI Note 15 Pro 5G", + "model": "25080RABDR", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013013", + "sources": [ + "https://gitlab.com/fw-dumps/redmi/lapis/-/raw/a8e5d203daf693a9f67f774a175eb4edacd7a439/product/etc/felica/common.cfg" + ] + }, + { + "name": "Xiaomi 17T Pro", + "model": "2602EPTC0R", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "013014", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/xiaomi/warhol/-/raw/092c3884755feb765373f5b990009f9018ef4489/product/etc/felica/common.cfg" + ] + }, + { + "name": "Redmi Note 9T", + "model": "A001XM", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "A001XM", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-canong-jp-felica/3930f4d1784ea47308f3ade670928d4154dda8e7/system/etc/felica/common.cfg" + ] + }, + { + "name": "Xiaomi 13T Pro", + "model": "A301XM", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "A301XM", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-corot-jp-felica/658720b4471f58161d25e04e2862c317ea3ba8d6/system/etc/felica/common.cfg" + ] + }, + { + "name": "Redmi Note 10 JE", + "model": "XIG02", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "XIG02", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/1103/repository/files/vendor%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=missi_phoneext4_global-user-13-TKQ1.220905.001-V14.0.21.0.TKRJPKD-release-keys" + ] + }, + { + "name": "Xiaomi 13T", + "model": "XIG04", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "XIG04", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-aristotle-jp-felica/9b696117546c97dd462db1e1ae4d72d740d4eebf/system/etc/felica/common.cfg" + ] + }, + { + "name": "Xiaomi 14T", + "model": "XIG07", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "XIG07", + "sources": [ + "https://raw.githubusercontent.com/Jiovanni-dump/xiaomi_degas_dump/bd5ab231c6b514cdb870f18b4a1126c61b6cd23c/product/etc/felica/common.cfg" + ] + }, + { + "name": "arrows Alpha", + "model": "F-51F", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "F51F", + "sources": [ + "https://raw.githubusercontent.com/arrows-development/device_fcnt_fuji/805f5c2e8f8bdc4fbd7c7cbd5182efce4bd57ec8/configs/felica_docomo/common.cfg" + ] + }, + { + "name": "arrows We2", + "model": "F-52E", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "F52E", + "sources": [ + "https://raw.githubusercontent.com/nattolecats/device_fcnt_itc/8887dad4d04c6bad092ab118269ab14aee5f559b/configs/felica/docomo/common.cfg" + ] + }, + { + "name": "arrows We3", + "model": "F-52G", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "F52G", + "sources": [ + "https://gitlab.com/arrows-development/vendor_fcnt_sbuya/-/raw/a7e59dae8ad6da58d81bb4ff77971c3f2f9e619c/proprietary/product/etc/felica/common.cfg" + ] + }, + { + "name": "arrows We2", + "model": "FCG02", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "FCG02", + "sources": [ + "https://raw.githubusercontent.com/nattolecats/device_fcnt_itc/8887dad4d04c6bad092ab118269ab14aee5f559b/configs/felica/kddi/common.cfg", + "https://gitlab.com/nattolecats/fcnt_itc_dump/-/raw/11735564fdfbaf42a78f750823d6100ac9008e79/product/etc/felica/common.cfg" + ] + }, + { + "name": "arrows Alpha", + "model": "M08", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "002018", + "sources": [ + "https://gitlab.com/arrows-development/fcnt_fuji_dump/-/raw/8bc02bf845512cf72c78dc12464c4af925fda1e3/product/etc/felica/common.cfg" + ] + }, + { + "name": "arrows We2 Plus", + "model": "M06", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "002015", + "sources": [ + "https://raw.githubusercontent.com/nattolecats/vendor_fcnt_m06/81874867580892073dec5605d892b2da16127e02/proprietary/product/etc/felica/common.cfg", + "https://gitlab.com/nattolecats/fcnt_m06_dump/-/raw/9f10323d0e6fbf20b2afce68743d478144f35e98/product/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia 5", + "model": "J9260", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "001004", + "sources": [ + "https://raw.githubusercontent.com/kazuiton/magisk-module-j9260-felica/110270f35fbd8263a9afbec9ad7bb4565ea34ac7/system/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia 5 III", + "model": "XQ-BQ42", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "001010", + "sources": [ + "https://raw.githubusercontent.com/r-ca/pdx214-osaifu/15f0596f3bcfee5931a3ee5f3601b883d1c95ab6/system/product/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia 1 IV", + "model": "XQ-CT44", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "001013", + "sources": [ + "https://gitlab.com/e2102/sony_pdx223_dump/-/raw/f9604323060cc39a4067424397f0aa8247266e9c/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia 1", + "model": "802SO", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "802SO", + "sources": [ + "https://gitlab.com/AndroPlus/xperia-1-griffin-dump/-/raw/537b95fef92d1a79755fbfdcb108ec60503d85fe/system/system/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia 1 V", + "model": "SO-51D", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SO51D", + "sources": [ + "https://raw.githubusercontent.com/RandomPush/docomo_pdx234_docomo_dump/04bccc9f375a67e4759815c3f72d428c96d4629f/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia Ace", + "model": "SO-02L", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SO02L", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/4495/repository/files/system%2Fsystem%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=houou-user-9-P-GANGES-DOCOMO-190930-0911-1-dev-keys" + ] + }, + { + "name": "Rakuten Mini", + "model": "C330", + "carrier": "Rakuten Mobile", + "format_version_carrier_info": "0001000018", + "mobile_phone_model_info": "008001", + "sources": [ + "https://raw.githubusercontent.com/AndroPlus-org/magisk-module-c330-gsi/e2b042dc908a7af115c37382c83de69997950a3c/system/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia XZ2 Compact", + "model": "SO-05K", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SO05K", + "sources": [ + "https://raw.githubusercontent.com/ROM-Dump/sony_apollo_docomo_dump/f5b75cab4c55e66314189bd5e6a9b7bcf2434c5a/system/system/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung GALAXY J", + "model": "SC-02F", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SC02F", + "sources": [ + "https://raw.githubusercontent.com/linhphi9x94/MIUI8_Patchrom_Samsung_js01lte/f97b4e4669a0159187cdf9da18976e7f3749b3d9/stockrom/system/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung Galaxy Feel2", + "model": "SC-02L", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SC02L", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/5510/repository/files/system%2Fsystem%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=jackpotveltedcm-user-10-QP1A.190711.020-SC02LOMS1CVK2-release-keys" + ] + }, + { + "name": "AQUOS SERIE mini", + "model": "SHV33", + "carrier": "au", + "format_version_carrier_info": "0001000012", + "mobile_phone_model_info": "03SHV33", + "sources": [ + "https://raw.githubusercontent.com/JerryCheng1/AQUOS_phone_official_dump/86551fbe4c10c06355c112d4053b5961f39ddd64/system/etc/felica/common.cfg" + ] + }, + { + "name": "AQUOS CRYSTAL X", + "model": "402SH", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000013", + "mobile_phone_model_info": "402SH", + "sources": [ + "https://raw.githubusercontent.com/JerryCheng1/AQUOS_phone_official_dump/651c54ff25e7dd285f67af1fb1b9ce84e5d9c3a5/system/etc/felica/common.cfg" + ] + }, + { + "name": "AQUOS Xx / AQUOS Xx-Y", + "model": "404SH", + "carrier": "", + "format_version_carrier_info": "0001000013", + "mobile_phone_model_info": "404SH", + "sources": [ + "https://raw.githubusercontent.com/JerryCheng1/AQUOS_phone_official_dump/41c238e6c76f867bc07cf9465d1a98148e1bd33f/etc/felica/common.cfg" + ] + }, + { + "name": "AQUOS Xx2 mini", + "model": "503SH", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000013", + "mobile_phone_model_info": "503SH", + "sources": [ + "https://raw.githubusercontent.com/JerryCheng1/AQUOS_phone_official_dump/1b90785a8e5ec25da2b1016432e2bfdbe08db3be/system/etc/felica/common.cfg" + ] + }, + { + "name": "Disney Mobile on docomo", + "model": "DM-01H", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "DM01H", + "sources": [ + "https://raw.githubusercontent.com/JerryCheng1/AQUOS_phone_official_dump/e202dd522684192a7c2c0d55838824ca3f9ebd79/system/etc/felica/common.cfg" + ] + }, + { + "name": "AQUOS SERIE", + "model": "SHL25", + "carrier": "au", + "format_version_carrier_info": "0001000012", + "mobile_phone_model_info": "03SHL25", + "sources": [ + "https://raw.githubusercontent.com/JerryCheng1/AQUOS_phone_official_dump/e375ca4896b5525dbaf53b6b8f12fa76a2923cdc/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia XZ1", + "model": "SOV36", + "carrier": "au", + "format_version_carrier_info": "0001000012", + "mobile_phone_model_info": "03SOV36", + "sources": [ + "https://raw.githubusercontent.com/Lycra-GX/proprietary_vendor_sony_tama-common/398b9bb4c6098320c8c7c2413d20e8a1f11f2639/proprietary/etc/felica/common.cfg", + "https://gitlab.com/zhz8888-Developing/sony-yoshino/vendor_sony_poplar_kddi/-/raw/7ea6afcc840c738d9863856a20c100602dfb4593/proprietary/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung Galaxy S7 edge", + "model": "SC-02H", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SC02H", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/4662/repository/files/system%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=hero2qltedcm-user-8.0.0-R16NW-SC02HOMU1CSI1-release-keys" + ] + }, + { + "name": "Samsung Galaxy S24", + "model": "SCG25", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "SCG25", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/5198/repository/files/system%2Fsystem%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=e1qkdix-user-14-UP1A.231005.007-SCG25KDS1AYA2-release-keys" + ] + }, + { + "name": "Samsung Galaxy A25 5G", + "model": "SC-53F", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC53F", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/samsung/a25ex/-/raw/571440ff1e6492f35289f004890c01bf92b9bef4/system/system/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung Galaxy A25 5G", + "model": "SM-A253Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMA253Z", + "sources": [ + "https://gitlab.com/yoshi3jp/android_dump_samsung_a25ex/-/raw/54ef87c13059ece65f91f4ca4d02d2f1b8ee091d/system/system/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung Galaxy Z Fold8 Ultra", + "model": "SM-F976Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009040", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F976Q_1_20260725023054_egracm89pq_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Fold8", + "model": "SM-F971Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009041", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F971Q_1_20260725041240_0u1ylarj9j_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Flip8", + "model": "SM-F776Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009039", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F776Q_1_20260725003751_m31r4ozl29_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Fold7", + "model": "SM-F966Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009024", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F966Q_2_20260603061401_6d7q82viiv_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Flip7", + "model": "SM-F766Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009023", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F766Q_2_20260609132321_kau5bh2l48_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy A25 5G", + "model": "SM-A253Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009021", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-A253Q_3_20260703102701_c1zyxcm2dq_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S25 Ultra", + "model": "SM-S938Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009020", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S938Q_2_20260506171041_lrr4b87hmu_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S25", + "model": "SM-S931Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009019", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S931Q_3_20260603035651_xfyfevp2np_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S25", + "model": "SC-51F", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC51F", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SC-51F_3_20260603032131_vq7wvokki3_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S25", + "model": "SCG31", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "SCG31", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SCG31_2_20260603033521_zktkp3mb91_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26", + "model": "SM-S942Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009028", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S942Q_1_20260615195242_kpd3befqx8_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26", + "model": "SC-51G", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC51G", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SC-51G_1_20260615202341_1s20d7ld9h_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26+", + "model": "SM-S947Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009029", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S947Q_1_20260615192511_hsmcek9ywb_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26+", + "model": "SC-52G", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC52G", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SC-52G_1_20260615202321_mylutqxqv2_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26 Ultra", + "model": "SM-S948Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009030", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S948Q_1_20260615185031_8q4kn88jld_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26 Ultra", + "model": "SC-53G", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC53G", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SC-53G_1_20260615202301_9v0vf8er4a_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy A57 5G", + "model": "SM-A576Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009035", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-A576Q_1_20260430131140_gki25wuvro_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy A36 5G", + "model": "SM-A366Q", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009022", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-A366Q_3_20260623154231_gnqtn362xv_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy A23 5G", + "model": "SC-56C", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC56C", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/samsung/a23ex/-/raw/2b082cca245d20aabb314c8c612573757143467a/system/system/etc/felica/common.cfg" + ] + }, + { + "name": "Xperia XZ1 Compact", + "model": "SO-02K", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SO02K", + "sources": [ + "https://raw.githubusercontent.com/log1cs/proprietary_vendor_sony_lilacdcm/43f724515c31f102a4133852de0a3e08be4ba20c/proprietary/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung GALAXY S III α", + "model": "SC-03E", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SC03E", + "sources": [ + "https://raw.githubusercontent.com/AOSB/proprietary_vendor_samsung/c2c523aaa3005bc9eb7293296d25d2ffd052e551/sc03e/proprietary/system/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung GALAXY S III", + "model": "SC-06D", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SC06D", + "sources": [ + "https://raw.githubusercontent.com/gunspeederdaiy/android_vendor_samsung_felica-common/385d4aecb489202c243aae52f7c15353e2b3942f/proprietary/etc/felica/common.cfg" + ] + }, + { + "name": "V30+", + "model": "L-01K", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "L01K", + "sources": [ + "https://raw.githubusercontent.com/toufune/proprietary_vendor_lge_l01k/92bf0f201390aa0462e31ea79465662b2dbf70e1/proprietary/system/etc/felica/common.cfg" + ] + }, + { + "name": "LG style3", + "model": "L-41A", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "L41A", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/5318/repository/files/product%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=style3lm_dcm_jp-user-10-QKQ1.200308.002-2012901066540-release-keys" + ] + }, + { + "name": "LG V60 ThinQ 5G", + "model": "L-51A", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "L51A", + "sources": [ + "https://raw.githubusercontent.com/AlcatrazDev-Android-Devices/vendor_lge_sm8250-common/28277fe3d624b42176cf18aea6815a3b5e01cecd/proprietary/product/etc/felica/common.cfg" + ] + }, + { + "name": "Android One X5", + "model": "X5-LG", + "carrier": "Y!mobile", + "format_version_carrier_info": "0001000013", + "mobile_phone_model_info": "X5LG", + "sources": [ + "https://dumps.tadiphone.dev/api/v4/projects/1125/repository/files/product%2Fetc%2Ffelica%2Fcommon.cfg/raw?ref=phoenix_sb_jp-user-11-RKQ1.201123.002-2134412239185-release-keys" + ] + }, + { + "name": "Xiaomi 12T Pro", + "model": "A201XM", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "A201XM", + "sources": [ + "https://raw.githubusercontent.com/soralis0912/magisk-module-A201XM-jp-felica/5aa2605441b2e06662d6cbebc653ccb6e3c68326/system/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "Redmi Note 13 Pro 5G", + "model": "XIG05", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "XIG05", + "sources": [ + "https://raw.githubusercontent.com/toufune/proprietary_vendor_xiaomi_garnet/3a8d18f07d5106d4b82ac7581ac291ecb1609fd6/proprietary/vendor/etc/felica/common.cfg" + ] + }, + { + "name": "arrows ケータイ", + "model": "F-03L", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "F03L", + "sources": [ + "https://raw.githubusercontent.com/IonAgorria/F03L-system-vendor/ad6e90dc988df78b12fd58d000f9f75b9d4bc684/system/etc/felica/common.cfg" + ] + }, + { + "name": "Natural AI Phone", + "model": "BGX5", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "BGX5", + "sources": [ + "https://gitlab.com/Toufu/brain_naturalaiphone_dump/-/raw/1215a8ebefe6487b13d4af8c68d63ba36eb82b54/product/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung Galaxy A21", + "model": "SC-42A", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000011", + "mobile_phone_model_info": "SC42A", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/samsung/a10eu/-/raw/622d37d563e0f67ddcdaf8f9f0d18c9a1032be8c/system/system/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung Galaxy A22 5G", + "model": "SC-56B", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC56B", + "sources": [ + "https://gitlab.com/Van-Firmware-Dumps/samsung/a22ex/-/raw/3e5b13ef6b57a18a8012687bb0eef93212d056f0/system/system/etc/felica/common.cfg" + ] + }, + { + "name": "OPPO Reno5 A", + "model": "CPH2199", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006005", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-57366a8808896441b4295ca76fc69c71/component-ota/22/03/09/09feba1a8f7d4a0ab804eca9ec2c12da.zip" + ] + }, + { + "name": "OPPO Reno7 A", + "model": "CPH2353", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006006", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-5df502df4c209c5b7ea513a9e410196c/component-ota/22/10/19/3c086e17e89e4f82b88a242c79f36dcf.zip" + ] + }, + { + "name": "OPPO Reno9 A", + "model": "CPH2523", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006008", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-67535d048ec307a6a05a2aa43088e6b2/component-ota/24/07/02/44119543add24b63be4b617b639af352.zip" + ] + }, + { + "name": "OPPO Reno10 Pro 5G", + "model": "CPH2541", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006009", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-aaef041af17e4304fccd08ad1d4c9840/component-ota/23/12/27/1d3d1463ec5343fa9d06e10db59c2df2.zip" + ] + }, + { + "name": "OPPO Reno11 A", + "model": "CPH2603", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006011", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-2bc0a008d8db39020bd5c302b85b1c30/component-ota/24/12/06/f435325e3f004e41b6b28bb3570f12ee.zip" + ] + }, + { + "name": "OPPO Reno13 A", + "model": "CPH2699", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006013", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-d9b20d73887088529dc4f016fd97746b/component-ota/25/11/11/a5dad63432854021b7b12ee50724a1a4.zip" + ] + }, + { + "name": "OPPO Reno15 A", + "model": "CPH2801", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006016", + "sources": [ + "https://component-ota-sg.allawnos.com/downloadCheck?c=6da42817ef836084cff568a1f1c5f411&p=f088224e006d1388a1bcc60343328430407c44c62933c0ec7a1e9e86cbc1d13712e1364ef4562be74d0f452b5ef4&d=b7ce601143611397f3f2d646007a853e1a3c4ed07f2b97f43c4dd1d191cbd2714cbd320fe30771e9&g=10eab6008d5642cf42abd2aa41f847cb&id=6a2243bc007ddc01813de2ae&taste=0&supportDLTaste=0&mode=1&tr=manual&s=86d5779535dc4875be76dbac49bea826" + ] + }, + { + "name": "OPPO A79 5G", + "model": "CPH2557", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006010", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-b0a2e7d904079e2ac2adc1ebf4922f89/component-ota/24/06/13/c89af1271d114bcc872405bebd88f583.zip" + ] + }, + { + "name": "OPPO A3 5G", + "model": "CPH2639", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006012", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-4b24ed728b016b16ffef0e2bd6500c9e/component-ota/24/12/30/35932477dc724031a5a4788a6ee531fa.zip" + ] + }, + { + "name": "OPPO A5 5G", + "model": "CPH2735", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006014", + "sources": [ + "https://gauss-componentotamanual.allawnofs.com/remove-9e61635cadae658e8272ad3754216f32/component-ota/26/03/06/5476490ca888443e8ccb96981cc0fd08.zip" + ] + }, + { + "name": "OPPO Find X9", + "model": "CPH2797", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "006015", + "sources": [ + "https://component-ota-sg.allawnos.com/downloadCheck?c=3667acbb100e6e9c496be74707ec9549&p=f088224e006d1388a7bc95074336df60442d12972a64c0ed2e1ac689cfc1d66417e3674dff5527e1105e452b5ef4&d=b7ce601143611397f3f2d646007a853e1a3c4ed07f2b97f43c4dd1d191cbd2714cbd320fe30771e9&g=10eab6008d5642cf42abd2aa41f847cb&id=6a435e689e207b01827c6c81&taste=0&supportDLTaste=0&mode=1&tr=manual&s=1a85ac174436f5004299c5d39546d610" + ] + }, + { + "name": "REDMAGIC 10 Pro / 10S Pro", + "model": "NX789J", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "019001", + "sources": [ + "https://rom.download.nubia.com/Europe%26Asia/NX789J/V2.0.0B05MR/update.zip" + ] + }, + { + "name": "REDMAGIC 11 Pro / 11S Pro", + "model": "NX809J", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "019002", + "sources": [ + "https://rom.download.nubia.com/Europe%26Asia/NX809J/REDMAGICOS11.0.19MR2/update.zip" + ] + }, + { + "name": "Samsung Galaxy Watch6 (WiFi, 40)", + "model": "SM-R930", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02003", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-R930_3_20260706161441_gs48m3j2dn_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch6 Classic (WiFi, 43)", + "model": "SM-R950", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02005", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-R950_3_20260706161331_qv4dvgpmox_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch6 / Watch6 Classic (WiFi, 44/47)", + "model": "SM-R940 / SM-R960", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02004", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-R940_3_20260706161411_0otk0mm6vg_fac.zip.enc4", + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-R960_12_20260706155641_nx7zkxr5e6_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch6 (LTE, 44)", + "model": "SM-R945F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02002", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-R945F_3_20260708181640_8orsuv1ec0_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch6 (LTE, 40)", + "model": "SM-R935F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02001", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-R935F_3_20260708181740_ktuqxg6cl9_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch7 (WiFi, 40)", + "model": "SM-L300", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02010", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L300_2_20260706103911_h392hzuijr_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch7 (LTE, 40)", + "model": "SM-L305F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02007", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L305F_2_20260709070330_mv65zzzggm_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch7 (WiFi, 44)", + "model": "SM-L310", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02011", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L310_2_20260706105133_rdq63ikyce_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch7 (LTE, 44)", + "model": "SM-L315F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02008", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L315F_2_20260709070840_tdcpgfy2m0_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch8 (WiFi, 40)", + "model": "SM-L320", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02015", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L320_1_20260706153840_kjoj1yd4yv_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch8 (WiFi, 44)", + "model": "SM-L330", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02016", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L330_1_20260706153911_rcfyt4g4uy_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch8 Classic (WiFi, 46)", + "model": "SM-L500", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02017", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L500_1_20260706153940_64ldbxnyza_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch8 (LTE, 40)", + "model": "SM-L325F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02012", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L325F_1_20260708145240_ny8faonjrt_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch8 (LTE, 44)", + "model": "SM-L335F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02013", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L335F_1_20260708145410_x4u6wvfexs_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch8 Classic (LTE, 46)", + "model": "SM-L505F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02014", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L505F_1_20260708145640_9rkb9e73nn_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch Ultra (LTE, 47)", + "model": "SM-L705F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02009", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-L705F_2_20260709071311_o2imccaz15_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch Ultra 2 (LTE, 47)", + "model": "SM-L715F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A0202B", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/911/SM-L715F_1_20260804114541_t8fq62rd11_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch9 (WiFi, 40)", + "model": "SM-L340", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02018", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/911/SM-L340_1_20260723154201_v0z01ipl15_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch9 (WiFi, 44)", + "model": "SM-L350", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A0202@", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/911/SM-L350_1_20260723155231_zzu7y8pnnx_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch9 (LTE, 40)", + "model": "SM-L345F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A02019", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/911/SM-L345F_1_20260804111211_rcwga6xulo_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Watch9 (LTE, 44)", + "model": "SM-L355F", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "A0202A", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/911/SM-L355F_1_20260804105730_pjmzitwc2x_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26", + "model": "SCG36", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "SCG36", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SCG36_1_20260615195251_6a1p14qs8g_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26", + "model": "SM-S942Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMS942Z", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S942Z_1_20260612121511_zxqpwkvf3r_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26", + "model": "SM-S942C", + "carrier": "Rakuten Mobile", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009031", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S942C_1_20260612121631_th4nq3iwhu_fac.zip.enc4" + ] + }, + { + "name": "Android One X3", + "model": "X3-KC", + "carrier": "Y!mobile", + "format_version_carrier_info": "0001000013", + "mobile_phone_model_info": "X3-KC", + "sources": [ + "https://raw.githubusercontent.com/2by2-Project-Devices/proprietary_vendor_kyocera_X3-KC_sprout/aac5f19e381e467d76d859960a46025c6c8c8f22/proprietary/system/etc/felica/common.cfg" + ] + }, + { + "name": "Samsung Galaxy S26 Ultra", + "model": "SCG37", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "SCG37", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SCG37_1_20260615181501_aa3em6owqt_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26+", + "model": "SM-S947Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMS947Z", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S947Z_1_20260612123211_8jrs1xf6gv_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26+", + "model": "SM-S947C", + "carrier": "Rakuten Mobile", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009032", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S947C_1_20260612124051_texwfwwbo2_fac.zip.enc4" + ] + }, + { + "name": "motorola razr 50d", + "model": "M-51E", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "M51E", + "sources": [ + "https://mirrors.lolinet.com/firmware/lenomola/2024/aito/official/Docomo/XT2453-8_AITO_DOCOMO_14_U4UCS34.36-80-1-2_subsidy-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip" + ] + }, + { + "name": "motorola razr 50s", + "model": "A403MO", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "A403MO", + "sources": [ + "https://mirrors.lolinet.com/firmware/lenomola/2024/aito/official/Softbank/XT2453-7_AITO_SOFTBANK_14_U3UCS34.63-105-13-5_subsidy-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip" + ] + }, + { + "name": "motorola razr 40s", + "model": "A303MO", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "A303MO", + "sources": [ + "https://mirrors.lolinet.com/firmware/lenomola/2023/lynkco/official/Softbank/XT2323-7_LYNKCO_SB_15_V1TV35H.41-48-5_subsidy-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip" + ] + }, + { + "name": "motorola edge 60s pro", + "model": "A502MO", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "A502MO", + "sources": [ + "https://mirrors.lolinet.com/firmware/lenomola/2025/cybert/official/Softbank/XT2507-3_CYBERT_SOFTBANK_15_V2VVA35.58-46-4_subsidy-DEFAULT_regulatory-DEFAULT_cid50_CFC.xml.zip" + ] + }, + { + "name": "Samsung Galaxy S26 Ultra", + "model": "SM-S948Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMS948Z", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S948Z_1_20260612130230_fow2y43j03_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26+", + "model": "SCG38", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "SCG38", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SCG38_1_20260615190011_gy64pzfibn_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy S26 Ultra", + "model": "SM-S948C", + "carrier": "Rakuten Mobile", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "009033", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-S948C_1_20260612130250_3s6vr2ve9h_fac.zip.enc4" + ] + }, + { + "name": "Google Pixel 11 Pro", + "model": "", + "carrier": "", + "format_version_carrier_info": "0001000068", + "mobile_phone_model_info": "007033", + "sources": [ + "https://android.googleapis.com/packages/ota-api/package/e68f6fe815801d1f4daa66844517ffbcc41c5c79.zip" + ] + }, + { + "name": "Samsung Galaxy A57 5G", + "model": "SC-54G", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC54G", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SC-54G_1_20260430134401_9bqovv0sfx_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy A57 5G", + "model": "SM-A576Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMA576Z", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-A576Z_1_20260430131110_kznaw63b6d_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Flip8", + "model": "SCG40", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "SCG40", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SCG40_1_20260724233541_w3dsp2e63g_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Flip8", + "model": "SC-55G", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC55G", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SC-55G_1_20260724224001_kkogk2x80x_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Flip8", + "model": "SM-F776Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMF776Z", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F776Z_1_20260724234550_9l9fplkszq_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Fold7", + "model": "SC-56F", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC56F", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SC-56F_2_20260603081241_cdd4830mk7_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Fold7", + "model": "SCG34", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "SCG34", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SCG34_2_20260603060141_b4mawqn8q0_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Flip7", + "model": "SM-F766Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMF766Z", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F766Z_2_20260609100140_1bzl93ammt_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Fold7", + "model": "SM-F966Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMF966Z", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F966Z_2_20260603061341_pxjuxum559_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Fold8", + "model": "SC-57G", + "carrier": "NTT Docomo", + "format_version_carrier_info": "0001000061", + "mobile_phone_model_info": "SC57G", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SC-57G_1_20260725032331_h9owiimchz_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Fold8", + "model": "SCG41", + "carrier": "au", + "format_version_carrier_info": "0001000062", + "mobile_phone_model_info": "SCG41", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SCG41_1_20260725032951_wem3zvfcyp_fac.zip.enc4" + ] + }, + { + "name": "Samsung Galaxy Z Fold8", + "model": "SM-F971Z", + "carrier": "SoftBank", + "format_version_carrier_info": "0001000063", + "mobile_phone_model_info": "SMF971Z", + "sources": [ + "http://cloud-neofussvr.samsungmobile.com/NF_SmartDownloadBinaryForMass.do?file=/neofus/910/SM-F971Z_1_20260725041220_aj53bo2p3u_fac.zip.enc4" + ] + } +] diff --git a/client/src/cmdhffelica.c b/client/src/cmdhffelica.c index 99a0843e0..89c5e146d 100644 --- a/client/src/cmdhffelica.c +++ b/client/src/cmdhffelica.c @@ -82,6 +82,7 @@ #define FELICA_POLLING_REQUEST_SYSTEM_CODE 0x01U #define FELICA_SYSTEM_LIST_JSON "felica/felica_system_code_list" #define FELICA_IC_CODE_LIST_JSON "felica/felica_ic_code_list" +#define FELICA_CONTAINER_ISSUE_LIST_JSON "felica/felica_container_issue_information_list" #define FELICA_REQUEST_SERVICE_DISCOVERY_BATCH_SIZE 32U #define FELICA_MAX_NODE_NUMBER 0x03FFU @@ -457,6 +458,8 @@ static json_t *felica_system_list = NULL; static bool felica_system_list_loaded = false; static json_t *felica_ic_code_list = NULL; static bool felica_ic_code_list_loaded = false; +static json_t *felica_container_issue_list = NULL; +static bool felica_container_issue_list_loaded = false; static void set_last_known_card(felica_card_select_t card) { last_known_card = card; @@ -771,6 +774,100 @@ static json_t *felica_get_ic_code_list(void) { return felica_ic_code_list; } +static json_t *felica_get_container_issue_list(void) { + if (felica_container_issue_list_loaded) { + return felica_container_issue_list; + } + + felica_container_issue_list_loaded = true; + + char *path = NULL; + if (searchFile(&path, RESOURCES_SUBDIR, FELICA_CONTAINER_ISSUE_LIST_JSON, ".json", true) != PM3_SUCCESS) { + return NULL; + } + + json_error_t error; + json_t *root = json_load_file(path, 0, &error); + if (root == NULL) { + PrintAndLogEx(WARNING, "Failed to parse `%s` line %d: %s", path, error.line, error.text); + free(path); + return NULL; + } + + if (json_is_array(root) == false) { + PrintAndLogEx(WARNING, "Invalid `%s` format, expected array root", path); + json_decref(root); + free(path); + return NULL; + } + + felica_container_issue_list = root; + free(path); + return felica_container_issue_list; +} + +static bool felica_container_issue_matches(const felica_get_container_issue_info_response_t *response, + const json_t *entry) { + if (response == NULL || json_is_object(entry) == false) { + return false; + } + + const char *format_hex = felica_get_json_string(entry, "format_version_carrier_info"); + const char *model = felica_get_json_string(entry, "mobile_phone_model_info"); + if (format_hex == NULL || model == NULL || + strlen(format_hex) != (sizeof(response->format_version_carrier_information) * 2U)) { + return false; + } + + uint8_t expected_format[sizeof(response->format_version_carrier_information)] = {0}; + size_t expected_format_len = 0; + if (hexstr_to_byte_array(format_hex, expected_format, &expected_format_len) == false || + expected_format_len != sizeof(expected_format) || + memcmp(response->format_version_carrier_information, expected_format, sizeof(expected_format)) != 0) { + return false; + } + + const size_t model_len = strlen(model); + if (model_len == 0 || model_len > sizeof(response->mobile_phone_model_information) || + memcmp(response->mobile_phone_model_information, model, model_len) != 0) { + return false; + } + + for (size_t i = model_len; i < sizeof(response->mobile_phone_model_information); i++) { + if (response->mobile_phone_model_information[i] != 0x00) { + return false; + } + } + + return true; +} + +static void felica_print_container_issue_annotations(const felica_get_container_issue_info_response_t *response) { + json_t *list = felica_get_container_issue_list(); + if (response == NULL || list == NULL) { + return; + } + + size_t index = 0; + json_t *entry = NULL; + json_array_foreach(list, index, entry) { + if (felica_container_issue_matches(response, entry) == false) { + continue; + } + + const char *name = felica_get_json_string(entry, "name"); + if (name == NULL) { + continue; + } + + const char *carrier = felica_get_json_string(entry, "carrier"); + PrintAndLogEx(INFO, " Device Model.......... " _GREEN_("%s"), name); + if (carrier) { + PrintAndLogEx(INFO, " Carrier............... " _GREEN_("%s"), carrier); + } + } +} + static const json_t *felica_find_ic_annotation(uint8_t rom_type, uint8_t ic_type) { json_t *ic_code_list = felica_get_ic_code_list(); if (ic_code_list == NULL) { @@ -2469,18 +2566,19 @@ static int info_felica(bool verbose) { sizeof(container_issue_info_response.mobile_phone_model_information), model_ascii, sizeof(model_ascii) - ); + ); PrintAndLogEx(INFO, "Container issue info:"); - PrintAndLogEx(INFO, " Format/Carrier... " _YELLOW_("%s"), + PrintAndLogEx(INFO, " Format/Carrier info... " _YELLOW_("%s"), sprint_hex_inrow(container_issue_info_response.format_version_carrier_information, sizeof(container_issue_info_response.format_version_carrier_information))); if (model_is_ascii) { - PrintAndLogEx(INFO, " Model............ " _GREEN_("%s") " (ASCII)", model_ascii); + PrintAndLogEx(INFO, " Model info............ " _GREEN_("%s") " (ASCII)", model_ascii); } else { - PrintAndLogEx(INFO, " Model............ " _YELLOW_("%s") " (HEX)", + PrintAndLogEx(INFO, " Model info............ " _YELLOW_("%s") " (HEX)", sprint_hex_inrow(container_issue_info_response.mobile_phone_model_information, sizeof(container_issue_info_response.mobile_phone_model_information))); } + felica_print_container_issue_annotations(&container_issue_info_response); } const uint16_t container_properties[] = {0x0000, 0x0001}; From 2362cabcd424b1b48b430dfdccc9ba4870761682 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E6=AD=90=E6=AD=AA?= Date: Tue, 14 Jul 2026 04:22:00 +0800 Subject: [PATCH 11/43] Add ISO15693 magic 'V3' tag support (hf 15 csetuid --v3 / hf 15 cfinalize) --- client/src/cmdhf15.c | 194 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 181 insertions(+), 13 deletions(-) diff --git a/client/src/cmdhf15.c b/client/src/cmdhf15.c index 1711e784c..463300802 100644 --- a/client/src/cmdhf15.c +++ b/client/src/cmdhf15.c @@ -3309,6 +3309,79 @@ static int CmdHF15Restore(const char *Cmd) { return PM3_SUCCESS; } +// ISO15693 magic "V3" tag support +#define ISO15_MAGIC_V3_BLK_UID_LO 0x10 +#define ISO15_MAGIC_V3_BLK_UID_HI 0x11 +#define ISO15_MAGIC_V3_BLK_SIG_A 0x14 +#define ISO15_MAGIC_V3_BLK_SIG_B 0x15 + +// signature check in block 0x14/0x15 +static const uint8_t iso15_magic_v3_sig_a[4] = {0xA5, 0x2B, 0x44, 0x2C}; +static const uint8_t iso15_magic_v3_sig_b[4] = {0x21, 0xAE, 0x93, 0x00}; + +// finalize command write in block 0x14/0x15 +// hf 15 raw -wac -d 022114A52B442C +// hf 15 raw -wac -d 02211569E25D00 +static const uint8_t iso15_magic_v3_fin_a[4] = {0xA5, 0x2B, 0x44, 0x2C}; +static const uint8_t iso15_magic_v3_fin_b[4] = {0x69, 0xE2, 0x5D, 0x00}; + +// Read one 4-byte block from a magic V3 tag in unaddressed mode. +static int hf15_magic_v3_read_blk(uint8_t blockno, uint8_t out[4]) { + + uint16_t approxlen = 2 + 1 + 2; + iso15_raw_cmd_t *packet = (iso15_raw_cmd_t *)calloc(1, sizeof(iso15_raw_cmd_t) + approxlen); + if (packet == NULL) { + PrintAndLogEx(WARNING, "Failed to allocate memory"); + return PM3_EMALLOC; + } + + // enforce OPTION flag so we get the lock byte, keeping data at offset 2 + packet->raw[packet->rawlen++] = arg_get_raw_flag(0, true, false, true); + packet->raw[packet->rawlen++] = ISO15693_READBLOCK; + packet->raw[packet->rawlen++] = blockno; + AddCrc15(packet->raw, packet->rawlen); + packet->rawlen += 2; + packet->flags = (ISO15_CONNECT | ISO15_READ_RESPONSE); + + clearCommandBuffer(); + SendCommandNG(CMD_HF_ISO15693_COMMAND, (uint8_t *)packet, ISO15_RAW_LEN(packet->rawlen)); + free(packet); + + PacketResponseNG resp; + if (WaitForResponseTimeout(CMD_HF_ISO15693_COMMAND, &resp, 2000) == false) { + PrintAndLogEx(DEBUG, "iso15693 timeout"); + return PM3_ETIMEOUT; + } + + ISO15_ERROR_HANDLING_RESPONSE + + uint8_t *d = resp.data.asBytes; + + ISO15_ERROR_HANDLING_CARD_RESPONSE(d, resp.length) + + memcpy(out, d + 2, 4); + return PM3_SUCCESS; +} + +// Write one 4-byte block to a magic V3 tag in unaddressed mode. +static int hf15_magic_v3_write_blk(uint8_t blockno, const uint8_t *data) { + uint16_t flags = arg_get_raw_flag(0, true, false, false); + return hf_15_write_blk(NULL, flags, NULL, true, blockno, data, 4); +} + +// Detect an un-finalized magic V3 tag by its configuration-mode signature. +static bool hf15_magic_v3_is_config_mode(void) { + uint8_t a[4] = {0}; + uint8_t b[4] = {0}; + if (hf15_magic_v3_read_blk(ISO15_MAGIC_V3_BLK_SIG_A, a) != PM3_SUCCESS) { + return false; + } + if (hf15_magic_v3_read_blk(ISO15_MAGIC_V3_BLK_SIG_B, b) != PM3_SUCCESS) { + return false; + } + return (memcmp(a, iso15_magic_v3_sig_a, 4) == 0) && (memcmp(b, iso15_magic_v3_sig_b, 4) == 0); +} + /** * Commandline handling: HF15 CMD CSETUID * Set UID for magic Chinese card @@ -3317,15 +3390,19 @@ static int CmdHF15CSetUID(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hf 15 csetuid", - "Set UID for magic Chinese card (only works with such cards)\n", + "Set UID for magic Chinese card (only works with such cards)\n" + "For magic 'V3' tags this writes the UID configuration only and is repeatable;\n" + "run `" _YELLOW_("hf 15 cfinalize") "` afterwards to lock the UID permanently.", "hf 15 csetuid -u E011223344556677 -> use gen1 command\n" - "hf 15 csetuid -u E011223344556677 --v2 -> use gen2 command" + "hf 15 csetuid -u E011223344556677 --v2 -> use gen2 command\n" + "hf 15 csetuid -u E011223344556677 --v3 -> use gen3 (V3) magic tag" ); void *argtable[] = { arg_param_begin, arg_str1("u", "uid", "", "UID, 8 hex bytes"), arg_lit0("2", "v2", "Use gen2 magic command"), + arg_lit0("3", "v3", "Use gen3 (V3) magic tag (repeatable, needs cfinalize)"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, false); @@ -3337,8 +3414,14 @@ static int CmdHF15CSetUID(const char *Cmd) { int uidlen = 0; CLIGetHexWithReturn(ctx, 1, payload.uid, &uidlen); bool use_v2 = arg_get_lit(ctx, 2); + bool use_v3 = arg_get_lit(ctx, 3); CLIParserFree(ctx); + if (use_v2 && use_v3) { + PrintAndLogEx(WARNING, "Select only one of " _YELLOW_("--v2") " / " _YELLOW_("--v3")); + return PM3_EINVARG; + } + if (uidlen != ISO15693_UID_LENGTH) { PrintAndLogEx(WARNING, "UID must include 8 hex bytes, got " _RED_("%i"), uidlen); return PM3_EINVARG; @@ -3360,19 +3443,40 @@ static int CmdHF15CSetUID(const char *Cmd) { } PrintAndLogEx(INFO, "Writing..."); - PacketResponseNG resp; - clearCommandBuffer(); - uint16_t cmd = CMD_HF_ISO15693_CSETUID; - if (use_v2) { - cmd = CMD_HF_ISO15693_CSETUID_V2; - } + if (use_v3) { + /* + for example id: E011223344556677 + [=] 16 | 77 66 55 44 | 0 | wfUD + [=] 17 | 33 22 11 E0 | 0 | 3".. + */ + uint8_t blk_lo[4] = {0}; + uint8_t blk_hi[4] = {0}; + reverse_array_copy(payload.uid + 4, 4, blk_lo); + reverse_array_copy(payload.uid, 4, blk_hi); - SendCommandNG(cmd, (uint8_t *)&payload, sizeof(payload)); - if (WaitForResponseTimeout(cmd, &resp, 2000) == false) { - PrintAndLogEx(WARNING, "timeout while waiting for reply"); - DropField(); - return PM3_ESOFT; + if (hf15_magic_v3_write_blk(ISO15_MAGIC_V3_BLK_UID_LO, blk_lo) != PM3_SUCCESS || + hf15_magic_v3_write_blk(ISO15_MAGIC_V3_BLK_UID_HI, blk_hi) != PM3_SUCCESS) { + PrintAndLogEx(FAILED, "Setting new UID ( " _RED_("fail") " )"); + PrintAndLogEx(NORMAL, ""); + return PM3_ESOFT; + } + + } else { + PacketResponseNG resp; + clearCommandBuffer(); + + uint16_t cmd = CMD_HF_ISO15693_CSETUID; + if (use_v2) { + cmd = CMD_HF_ISO15693_CSETUID_V2; + } + + SendCommandNG(cmd, (uint8_t *)&payload, sizeof(payload)); + if (WaitForResponseTimeout(cmd, &resp, 2000) == false) { + PrintAndLogEx(WARNING, "timeout while waiting for reply"); + DropField(); + return PM3_ESOFT; + } } PrintAndLogEx(INFO, "Verifying..."); @@ -3397,6 +3501,69 @@ static int CmdHF15CSetUID(const char *Cmd) { return PM3_ESOFT; } +/** + * Commandline handling: HF15 CMD CFINALIZE + * Finalize a magic 'V3' tag - irreversible + */ +static int CmdHF15CFinalize(const char *Cmd) { + + CLIParserContext *ctx; + CLIParserInit(&ctx, "hf 15 cfinalize", + "Finalize a magic ISO15693 'V3' tag.\n" + _RED_("This operation is irreversible.") " After finalize the configuration\n" + "area is erased and the UID can no longer be changed. Set the UID with\n" + "`" _YELLOW_("hf 15 csetuid --v3") "` first, then lock it in with this command.", + "hf 15 cfinalize -y" + ); + + void *argtable[] = { + arg_param_begin, + arg_lit0("y", "yes", "Confirm the irreversible finalize operation"), + arg_param_end + }; + CLIExecWithReturn(ctx, Cmd, argtable, true); + bool confirmed = arg_get_lit(ctx, 1); + CLIParserFree(ctx); + + PrintAndLogEx(INFO, "Get current tag"); + + uint8_t carduid[ISO15693_UID_LENGTH] = {0x00}; + if (getUID(true, false, carduid) != PM3_SUCCESS) { + PrintAndLogEx(FAILED, "no tag found"); + return PM3_ESOFT; + } + + // Safety: only proceed on a tag that is actually an un-finalized magic V3. + // Writing the finalize values to any other tag may permanently brick it. + if (hf15_magic_v3_is_config_mode() == false) { + PrintAndLogEx(FAILED, "tag is not an un-finalized magic " _YELLOW_("V3") " tag"); + PrintAndLogEx(HINT, "Hint: signature in blocks 0x14/0x15 not found - already finalized or not a V3 tag"); + return PM3_ESOFT; + } + + PrintAndLogEx(SUCCESS, "Magic " _GREEN_("V3") " tag in configuration mode ( " _GREEN_("ok") " )"); + + if (confirmed == false) { + PrintAndLogEx(WARNING, _RED_("This operation is irreversible!") " The UID will be locked permanently."); + PrintAndLogEx(WARNING, "Add " _YELLOW_("-y") " to confirm and proceed."); + return PM3_EINVARG; + } + + PrintAndLogEx(INFO, "Finalizing..."); + + if (hf15_magic_v3_write_blk(ISO15_MAGIC_V3_BLK_SIG_A, iso15_magic_v3_fin_a) != PM3_SUCCESS || + hf15_magic_v3_write_blk(ISO15_MAGIC_V3_BLK_SIG_B, iso15_magic_v3_fin_b) != PM3_SUCCESS) { + PrintAndLogEx(FAILED, "Finalize ( " _RED_("fail") " )"); + PrintAndLogEx(NORMAL, ""); + return PM3_ESOFT; + } + + PrintAndLogEx(SUCCESS, "Finalize ( " _GREEN_("ok") " )"); + PrintAndLogEx(HINT, "Hint: UID is now locked; the tag behaves like a normal ISO15693 tag"); + PrintAndLogEx(NORMAL, ""); + return PM3_SUCCESS; +} + static int CmdHF15SlixEASEnable(const char *Cmd) { CLIParserContext *ctx; @@ -4146,6 +4313,7 @@ static command_t CommandTable[] = { {"writedsfid", CmdHF15WriteDsfid, IfPm3Iso15693, "Writes the DSFID on an ISO-15693 tag"}, {"-----------", CmdHF15Help, IfPm3Iso15693, "------------------------- " _CYAN_("Magic") " -----------------------"}, {"csetuid", CmdHF15CSetUID, IfPm3Iso15693, "Set UID for magic card"}, + {"cfinalize", CmdHF15CFinalize, IfPm3Iso15693, "Finalize a magic V3 tag (irreversible)"}, {NULL, NULL, NULL, NULL} }; From f1fc9adaed8e3b1ef652e0cca1a69265df26b13b Mon Sep 17 00:00:00 2001 From: oSPANNERo <25675033+oSPANNERo@users.noreply.github.com> Date: Mon, 17 Aug 2026 19:06:19 -0400 Subject: [PATCH 12/43] fix(mifare): preserve readable Key B in sector trailer dumps --- CHANGELOG.md | 1 + client/src/cmdhfmf.c | 7 +++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/CHANGELOG.md b/CHANGELOG.md index d2f28c41e..4f50b6cf6 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -3,6 +3,7 @@ All notable changes to this project will be documented in this file. This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log... ## [unreleased][unreleased] +- Fixed `hf mf dump` replacing readable sector trailer Key B values with values from the key file (@oSPANNERo) - Added `hf felica seacauth1` command - Added `lf trovan` commands to support Trovan Animal ID (@iceman1001) - Added `hf mf gdmgetblk/gdmgethidblk/gdmsethidblk/gdmsetuid/gdmwipe/gdmsetsig` (@0x6r1an0y) diff --git a/client/src/cmdhfmf.c b/client/src/cmdhfmf.c index 6707ad17d..2ebc9a608 100644 --- a/client/src/cmdhfmf.c +++ b/client/src/cmdhfmf.c @@ -1085,9 +1085,12 @@ static int mfc_read_tag(iso14a_card_select_t *card, uint8_t *carddata, uint8_t n uint8_t *data = resp.data.asBytes; if (mfIsSectorTrailerBasedOnBlocks(sectorNo, blockNo)) { - // sector trailer. Fill in the keys. + // sector trailer. Key A is never readable; preserve Key B when ACL allows it. memcpy(data, keyA + (sectorNo * MIFARE_KEY_SIZE), MIFARE_KEY_SIZE); - memcpy(data + 10, keyB + (sectorNo * MIFARE_KEY_SIZE), MIFARE_KEY_SIZE); + uint8_t trailer_acl = mf_get_accesscondition(3, &data[6]); + if (trailer_acl != 0 && trailer_acl != 1 && trailer_acl != 2) { + memcpy(data + 10, keyB + (sectorNo * MIFARE_KEY_SIZE), MIFARE_KEY_SIZE); + } } memcpy(carddata + (MFBLOCK_SIZE * (mfFirstBlockOfSector(sectorNo) + blockNo)), data, MFBLOCK_SIZE); From 43f0f9f080d349616cf653fae8d64a2cbd0580a9 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sun, 16 Aug 2026 12:29:03 +0800 Subject: [PATCH 13/43] Fixes an issue where compiling armsrc fails in Proxspace. 1. Resolve the compilation failure in ProxSpace by specifying the version number of mingw-w64-ucrt-x86_64-arm-none-eabi-binutils. 2. Once msys2 resolves the issue, remove the specified version number to allow the latest version to be installed. --- .github/workflows/windows.yml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/.github/workflows/windows.yml b/.github/workflows/windows.yml index a51b71b95..1bffbd34a 100644 --- a/.github/workflows/windows.yml +++ b/.github/workflows/windows.yml @@ -58,7 +58,9 @@ jobs: mingw-w64-ucrt-x86_64-gcc mingw-w64-ucrt-x86_64-arm-none-eabi-gcc mingw-w64-ucrt-x86_64-arm-none-eabi-gdb - mingw-w64-ucrt-x86_64-arm-none-eabi-binutils + # TODO workaround: "error: linker script file 'xxxx' appears multiple times" + # This should be reverted once MSYS2 ships a non-broken version of the linker. + mingw-w64-ucrt-x86_64-arm-none-eabi-binutils=2.46.1-1 mingw-w64-ucrt-x86_64-arm-none-eabi-newlib mingw-w64-ucrt-x86_64-readline mingw-w64-ucrt-x86_64-libsndfile From ca83bb7ea8d8c93f0b328722749a585f494c710c Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sun, 16 Aug 2026 12:49:08 +0800 Subject: [PATCH 14/43] Specify the URL for binutils in packages.txt. --- .github/workflows/windows.yml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/.github/workflows/windows.yml b/.github/workflows/windows.yml index 1bffbd34a..f178fd476 100644 --- a/.github/workflows/windows.yml +++ b/.github/workflows/windows.yml @@ -60,7 +60,8 @@ jobs: mingw-w64-ucrt-x86_64-arm-none-eabi-gdb # TODO workaround: "error: linker script file 'xxxx' appears multiple times" # This should be reverted once MSYS2 ships a non-broken version of the linker. - mingw-w64-ucrt-x86_64-arm-none-eabi-binutils=2.46.1-1 + # mingw-w64-ucrt-x86_64-arm-none-eabi-binutils + https://repo.msys2.org/mingw/ucrt64/mingw-w64-ucrt-x86_64-arm-none-eabi-binutils-2.46.1-1-any.pkg.tar.zst mingw-w64-ucrt-x86_64-arm-none-eabi-newlib mingw-w64-ucrt-x86_64-readline mingw-w64-ucrt-x86_64-libsndfile From c8a20ab885671f04f8fb3fb6e48daf733e4eebd5 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sun, 16 Aug 2026 13:04:19 +0800 Subject: [PATCH 15/43] Let binutils' Downgrade be a step. --- .github/workflows/windows.yml | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/.github/workflows/windows.yml b/.github/workflows/windows.yml index f178fd476..2cfca5970 100644 --- a/.github/workflows/windows.yml +++ b/.github/workflows/windows.yml @@ -58,10 +58,7 @@ jobs: mingw-w64-ucrt-x86_64-gcc mingw-w64-ucrt-x86_64-arm-none-eabi-gcc mingw-w64-ucrt-x86_64-arm-none-eabi-gdb - # TODO workaround: "error: linker script file 'xxxx' appears multiple times" - # This should be reverted once MSYS2 ships a non-broken version of the linker. - # mingw-w64-ucrt-x86_64-arm-none-eabi-binutils - https://repo.msys2.org/mingw/ucrt64/mingw-w64-ucrt-x86_64-arm-none-eabi-binutils-2.46.1-1-any.pkg.tar.zst + mingw-w64-ucrt-x86_64-arm-none-eabi-binutils mingw-w64-ucrt-x86_64-arm-none-eabi-newlib mingw-w64-ucrt-x86_64-readline mingw-w64-ucrt-x86_64-libsndfile @@ -110,6 +107,11 @@ jobs: - uses: actions/checkout@v6 + # TODO workaround: "error: linker script file 'xxxx' appears multiple times" + # This should be reverted once MSYS2 ships a non-broken version of the linker. + - name: Downgrade ARM linker (Windows, temporary) + run: pacman -U --noconfirm https://repo.msys2.org/mingw/ucrt64/mingw-w64-ucrt-x86_64-arm-none-eabi-binutils-2.46.1-1-any.pkg.tar.zst + - name: make clean run: make clean From fb21fd80eb5ba975d18ea620adb085b800720edc Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 15:32:48 +0800 Subject: [PATCH 16/43] Added the armlib third-party dependency. --- armlib/AT32F435xx_v2.svd | 56400 ++++++++++++++++ armlib/AT32_Firmware_Library_Change.md | 46 + armlib/at32_i2c/at32f435_437_i2c_app.c | 2338 + armlib/at32_i2c/at32f435_437_i2c_app.h | 197 + armlib/at32_sys/at32f435_437_conf.h | 186 + .../cm4/core_support/arm_common_tables.h | 539 + .../cm4/core_support/arm_common_tables_f16.h | 132 + .../cm4/core_support/arm_const_structs.h | 86 + .../cm4/core_support/arm_const_structs_f16.h | 77 + .../cmsis/cm4/core_support/arm_helium_utils.h | 753 + .../cmsis/cm4/core_support/arm_math.h | 236 + .../cmsis/cm4/core_support/arm_math_f16.h | 59 + .../cmsis/cm4/core_support/arm_math_memory.h | 206 + .../cmsis/cm4/core_support/arm_math_types.h | 616 + .../cm4/core_support/arm_math_types_f16.h | 163 + .../cmsis/cm4/core_support/arm_mve_tables.h | 231 + .../cm4/core_support/arm_mve_tables_f16.h | 109 + .../cmsis/cm4/core_support/arm_vec_math.h | 373 + .../cmsis/cm4/core_support/arm_vec_math_f16.h | 312 + .../cmsis/cm4/core_support/cmsis_armcc.h | 888 + .../cmsis/cm4/core_support/cmsis_armclang.h | 1503 + .../cm4/core_support/cmsis_armclang_ltm.h | 1928 + .../cmsis/cm4/core_support/cmsis_compiler.h | 283 + .../cmsis/cm4/core_support/cmsis_gcc.h | 2212 + .../cmsis/cm4/core_support/cmsis_iccarm.h | 1002 + .../cmsis/cm4/core_support/cmsis_version.h | 39 + .../cmsis/cm4/core_support/core_cm4.h | 2129 + .../cmsis/cm4/core_support/mpu_armv7.h | 275 + .../cmsis/cm4/core_support/mpu_armv8.h | 352 + .../cmsis/cm4/core_support/pmu_armv8.h | 337 + .../cmsis/cm4/device_support/at32f435_437.h | 876 + .../startup/gcc/startup_at32f435_437.s | 526 + .../cm4/device_support/system_at32f435_437.c | 194 + .../cm4/device_support/system_at32f435_437.h | 79 + .../at32_sys/drivers/inc/at32f435_437_acc.h | 204 + .../at32_sys/drivers/inc/at32f435_437_adc.h | 937 + .../at32_sys/drivers/inc/at32f435_437_can.h | 1041 + .../at32_sys/drivers/inc/at32f435_437_crc.h | 198 + .../at32_sys/drivers/inc/at32f435_437_crm.h | 1575 + .../at32_sys/drivers/inc/at32f435_437_dac.h | 393 + .../at32_sys/drivers/inc/at32f435_437_debug.h | 228 + .../at32_sys/drivers/inc/at32f435_437_def.h | 69 + .../at32_sys/drivers/inc/at32f435_437_dma.h | 787 + .../at32_sys/drivers/inc/at32f435_437_dvp.h | 620 + .../at32_sys/drivers/inc/at32f435_437_edma.h | 1066 + .../at32_sys/drivers/inc/at32f435_437_emac.h | 1726 + .../at32_sys/drivers/inc/at32f435_437_ertc.h | 1204 + .../at32_sys/drivers/inc/at32f435_437_exint.h | 234 + .../at32_sys/drivers/inc/at32f435_437_flash.h | 722 + .../at32_sys/drivers/inc/at32f435_437_gpio.h | 563 + .../at32_sys/drivers/inc/at32f435_437_i2c.h | 478 + .../at32_sys/drivers/inc/at32f435_437_misc.h | 123 + .../at32_sys/drivers/inc/at32f435_437_pwc.h | 228 + .../at32_sys/drivers/inc/at32f435_437_qspi.h | 563 + .../at32_sys/drivers/inc/at32f435_437_scfg.h | 319 + .../at32_sys/drivers/inc/at32f435_437_sdio.h | 623 + .../at32_sys/drivers/inc/at32f435_437_spi.h | 504 + .../at32_sys/drivers/inc/at32f435_437_tmr.h | 1005 + .../at32_sys/drivers/inc/at32f435_437_usart.h | 414 + .../at32_sys/drivers/inc/at32f435_437_usb.h | 1422 + .../at32_sys/drivers/inc/at32f435_437_wdt.h | 195 + .../at32_sys/drivers/inc/at32f435_437_wwdt.h | 157 + .../at32_sys/drivers/inc/at32f435_437_xmc.h | 1074 + .../at32_sys/drivers/src/at32f435_437_acc.c | 247 + .../at32_sys/drivers/src/at32f435_437_adc.c | 1140 + .../at32_sys/drivers/src/at32f435_437_can.c | 1244 + .../at32_sys/drivers/src/at32f435_437_crc.c | 208 + .../at32_sys/drivers/src/at32f435_437_crm.c | 1061 + .../at32_sys/drivers/src/at32f435_437_dac.c | 480 + .../at32_sys/drivers/src/at32f435_437_debug.c | 133 + .../at32_sys/drivers/src/at32f435_437_dma.c | 860 + .../at32_sys/drivers/src/at32f435_437_dvp.c | 535 + .../at32_sys/drivers/src/at32f435_437_edma.c | 1060 + .../at32_sys/drivers/src/at32f435_437_emac.c | 2457 + .../at32_sys/drivers/src/at32f435_437_ertc.c | 1602 + .../at32_sys/drivers/src/at32f435_437_exint.c | 264 + .../at32_sys/drivers/src/at32f435_437_flash.c | 1157 + .../at32_sys/drivers/src/at32f435_437_gpio.c | 523 + .../at32_sys/drivers/src/at32f435_437_i2c.c | 819 + .../at32_sys/drivers/src/at32f435_437_misc.c | 172 + .../at32_sys/drivers/src/at32f435_437_pwc.c | 250 + .../at32_sys/drivers/src/at32f435_437_qspi.c | 499 + .../at32_sys/drivers/src/at32f435_437_scfg.c | 218 + .../at32_sys/drivers/src/at32f435_437_sdio.c | 617 + .../at32_sys/drivers/src/at32f435_437_spi.c | 720 + .../at32_sys/drivers/src/at32f435_437_tmr.c | 1881 + .../at32_sys/drivers/src/at32f435_437_usart.c | 811 + .../at32_sys/drivers/src/at32f435_437_usb.c | 1105 + .../at32_sys/drivers/src/at32f435_437_wdt.c | 154 + .../at32_sys/drivers/src/at32f435_437_wwdt.c | 149 + .../at32_sys/drivers/src/at32f435_437_xmc.c | 998 + armlib/at32_usb/usb_conf.h | 225 + armlib/at32_usb/usb_drivers/inc/usb_core.h | 134 + armlib/at32_usb/usb_drivers/inc/usb_std.h | 395 + armlib/at32_usb/usb_drivers/inc/usbd_core.h | 212 + armlib/at32_usb/usb_drivers/inc/usbd_int.h | 80 + armlib/at32_usb/usb_drivers/inc/usbd_sdr.h | 71 + armlib/at32_usb/usb_drivers/inc/usbh_core.h | 373 + armlib/at32_usb/usb_drivers/inc/usbh_ctrl.h | 107 + armlib/at32_usb/usb_drivers/inc/usbh_int.h | 75 + armlib/at32_usb/usb_drivers/src/usb_core.c | 186 + armlib/at32_usb/usb_drivers/src/usbd_core.c | 904 + armlib/at32_usb/usb_drivers/src/usbd_int.c | 540 + armlib/at32_usb/usb_drivers/src/usbd_sdr.c | 565 + armlib/at32_usb/usb_drivers/src/usbh_core.c | 1239 + armlib/at32_usb/usb_drivers/src/usbh_ctrl.c | 966 + armlib/at32_usb/usb_drivers/src/usbh_int.c | 535 + armlib/at32_usb/usbd_class/cdc/cdc_class.c | 375 + armlib/at32_usb/usbd_class/cdc/cdc_class.h | 79 + armlib/at32_usb/usbd_class/cdc/cdc_desc.c | 185 + 110 files changed, 122964 insertions(+) create mode 100644 armlib/AT32F435xx_v2.svd create mode 100644 armlib/AT32_Firmware_Library_Change.md create mode 100644 armlib/at32_i2c/at32f435_437_i2c_app.c create mode 100644 armlib/at32_i2c/at32f435_437_i2c_app.h create mode 100644 armlib/at32_sys/at32f435_437_conf.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_common_tables.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_common_tables_f16.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_const_structs.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_const_structs_f16.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_helium_utils.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_math.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_math_f16.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_math_memory.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_math_types.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_math_types_f16.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_mve_tables.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_mve_tables_f16.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_vec_math.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/arm_vec_math_f16.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/cmsis_armcc.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/cmsis_armclang.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/cmsis_armclang_ltm.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/cmsis_compiler.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/cmsis_gcc.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/cmsis_iccarm.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/cmsis_version.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/core_cm4.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/mpu_armv7.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/mpu_armv8.h create mode 100644 armlib/at32_sys/cmsis/cm4/core_support/pmu_armv8.h create mode 100644 armlib/at32_sys/cmsis/cm4/device_support/at32f435_437.h create mode 100644 armlib/at32_sys/cmsis/cm4/device_support/startup/gcc/startup_at32f435_437.s create mode 100644 armlib/at32_sys/cmsis/cm4/device_support/system_at32f435_437.c create mode 100644 armlib/at32_sys/cmsis/cm4/device_support/system_at32f435_437.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_acc.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_adc.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_can.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_crc.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_crm.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_dac.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_debug.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_def.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_dma.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_dvp.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_edma.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_emac.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_ertc.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_exint.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_flash.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_gpio.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_i2c.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_misc.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_pwc.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_qspi.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_scfg.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_sdio.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_spi.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_tmr.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_usart.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_usb.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_wdt.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_wwdt.h create mode 100644 armlib/at32_sys/drivers/inc/at32f435_437_xmc.h create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_acc.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_adc.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_can.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_crc.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_crm.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_dac.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_debug.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_dma.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_dvp.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_edma.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_emac.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_ertc.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_exint.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_flash.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_gpio.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_i2c.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_misc.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_pwc.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_qspi.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_scfg.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_sdio.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_spi.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_tmr.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_usart.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_usb.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_wdt.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_wwdt.c create mode 100644 armlib/at32_sys/drivers/src/at32f435_437_xmc.c create mode 100644 armlib/at32_usb/usb_conf.h create mode 100644 armlib/at32_usb/usb_drivers/inc/usb_core.h create mode 100644 armlib/at32_usb/usb_drivers/inc/usb_std.h create mode 100644 armlib/at32_usb/usb_drivers/inc/usbd_core.h create mode 100644 armlib/at32_usb/usb_drivers/inc/usbd_int.h create mode 100644 armlib/at32_usb/usb_drivers/inc/usbd_sdr.h create mode 100644 armlib/at32_usb/usb_drivers/inc/usbh_core.h create mode 100644 armlib/at32_usb/usb_drivers/inc/usbh_ctrl.h create mode 100644 armlib/at32_usb/usb_drivers/inc/usbh_int.h create mode 100644 armlib/at32_usb/usb_drivers/src/usb_core.c create mode 100644 armlib/at32_usb/usb_drivers/src/usbd_core.c create mode 100644 armlib/at32_usb/usb_drivers/src/usbd_int.c create mode 100644 armlib/at32_usb/usb_drivers/src/usbd_sdr.c create mode 100644 armlib/at32_usb/usb_drivers/src/usbh_core.c create mode 100644 armlib/at32_usb/usb_drivers/src/usbh_ctrl.c create mode 100644 armlib/at32_usb/usb_drivers/src/usbh_int.c create mode 100644 armlib/at32_usb/usbd_class/cdc/cdc_class.c create mode 100644 armlib/at32_usb/usbd_class/cdc/cdc_class.h create mode 100644 armlib/at32_usb/usbd_class/cdc/cdc_desc.c diff --git a/armlib/AT32F435xx_v2.svd b/armlib/AT32F435xx_v2.svd new file mode 100644 index 000000000..af241bde6 --- /dev/null +++ b/armlib/AT32F435xx_v2.svd @@ -0,0 +1,56400 @@ + + + + + + + + Keil + ArteryTek + AT32F435xx_v2 + AT32F435 + 1.0 + ARM 32-bit Cortex-M4 Microcontroller based device, CPU clock up to 288MHz, etc. + + ARM Limited (ARM) is supplying this software for use with Cortex-M\n + processor based microcontroller, but can be equally used for other\n + suitable processor architectures. This file can be freely distributed.\n + Modifications to this file shall be clearly marked.\n + \n + THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED\n + OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF\n + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.\n + ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR\n + CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + + + CM4 + r0p1 + little + false + true + 4 + false + + 8 + 32 + + 32 + read-write + 0x00000000 + 0xFFFFFFFF + + + + XMC + Flexible static memory controller + XMC + 0xA0000000 + + 0x0 + 0x1000 + registers + + + XMC + XMC global interrupt + 48 + + + + BK1CTRL1 + BK1CTRL1 + SRAM/NOR-Flash chip-select control register + 1 + 0x0 + 0x20 + read-write + 0x000030DB + + + MWMC + Memory write mode control + 19 + 1 + + + CRPGS + CRAM page size + 16 + 3 + + + NWASEN + NWAIT in asynchronous transfer enable + 15 + 1 + + + RWTD + Read-write timing different + 14 + 1 + + + NWSEN + NWAIT in synchronous transfer enable + 13 + 1 + + + WEN + Write enable + 12 + 1 + + + NWTCFG + Wait timing configuration + 11 + 1 + + + WRAPEN + Wrapped enable + 10 + 1 + + + NWPOL + NWAIT polarity + 9 + 1 + + + SYNCBEN + Synchronous burst enable + 8 + 1 + + + NOREN + Nor flash access enable + 6 + 1 + + + EXTMDBW + External memory data bus width + 4 + 2 + + + DEV + Memory device type + 2 + 2 + + + ADMUXEN + Address and data multiplexing enable + 1 + 1 + + + EN + Memory bank enable + 0 + 1 + + + + + BK1TMG1 + BK1TMG1 + SRAM/NOR-Flash chip-select timing register + 1 + 0x4 + 0x20 + read-write + 0x0FFFFFFF + + + ASYNCM + Asynchronous mode + 28 + 2 + + + DTLAT + Data latency + 24 + 4 + + + CLKPSC + Clock prescale + 20 + 4 + + + BUSLAT + Bus latency + 16 + 4 + + + DTST + Asynchronous data setup time + 8 + 8 + + + ADDRHT + Address-hold time + 4 + 4 + + + ADDRST + Address setup time + 0 + 4 + + + + + BK1CTRL2 + BK1CTRL2 + SRAM/NOR-Flash chip-select control register + 2 + 0x8 + 0x20 + read-write + 0x000030D2 + + + MWMC + Memory write mode control + 19 + 1 + + + CRPGS + CRAM page size + 16 + 3 + + + NWASEN + NWAIT in asynchronous transfer enable + 15 + 1 + + + RWTD + Read-write timing different + 14 + 1 + + + NWSEN + NWAIT in synchronous transfer enable + 13 + 1 + + + WEN + Write enable + 12 + 1 + + + NWTCFG + Wait timing configuration + 11 + 1 + + + WRAPEN + Wrapped enable + 10 + 1 + + + NWPOL + NWAIT polarity + 9 + 1 + + + SYNCBEN + Synchronous burst enable + 8 + 1 + + + NOREN + Nor flash access enable + 6 + 1 + + + EXTMDBW + External memory data bus width + 4 + 2 + + + DEV + Memory device type + 2 + 2 + + + ADMUXEN + Address and data multiplexing enable + 1 + 1 + + + EN + Memory bank enable + 0 + 1 + + + + + BK1TMG2 + BK1TMG2 + SRAM/NOR-Flash chip-select timing register + 2 + 0xC + 0x20 + read-write + 0x0FFFFFFF + + + ASYNCM + Asynchronous mode + 28 + 2 + + + DTLAT + Data latency + 24 + 4 + + + CLKPSC + Clock prescale + 20 + 4 + + + BUSLAT + Bus latency + 16 + 4 + + + DTST + Asynchronous data setup time + 8 + 8 + + + ADDRHT + Address-hold time + 4 + 4 + + + ADDRST + Address setup time + 0 + 4 + + + + + BK1CTRL3 + BK1CTRL3 + SRAM/NOR-Flash chip-select control register + 3 + 0x10 + 0x20 + read-write + 0x000030D2 + + + MWMC + Memory write mode control + 19 + 1 + + + CRPGS + CRAM page size + 16 + 3 + + + NWASEN + NWAIT in asynchronous transfer enable + 15 + 1 + + + RWTD + Read-write timing different + 14 + 1 + + + NWSEN + NWAIT in synchronous transfer enable + 13 + 1 + + + WEN + Write enable + 12 + 1 + + + NWTCFG + Wait timing configuration + 11 + 1 + + + WRAPEN + Wrapped enable + 10 + 1 + + + NWPOL + NWAIT polarity + 9 + 1 + + + SYNCBEN + Synchronous burst enable + 8 + 1 + + + NOREN + Nor flash access enable + 6 + 1 + + + EXTMDBW + External memory data bus width + 4 + 2 + + + DEV + Memory device type + 2 + 2 + + + ADMUXEN + Address and data multiplexing enable + 1 + 1 + + + EN + Memory bank enable + 0 + 1 + + + + + BK1TMG3 + BK1TMG3 + SRAM/NOR-Flash chip-select timing register + 3 + 0x14 + 0x20 + read-write + 0x0FFFFFFF + + + ASYNCM + Asynchronous mode + 28 + 2 + + + DTLAT + Data latency + 24 + 4 + + + CLKPSC + Clock prescale + 20 + 4 + + + BUSLAT + Bus latency + 16 + 4 + + + DTST + Asynchronous data setup time + 8 + 8 + + + ADDRHT + Address-hold time + 4 + 4 + + + ADDRST + Address setup time + 0 + 4 + + + + + BK1CTRL4 + BK1CTRL4 + SRAM/NOR-Flash chip-select control register + 4 + 0x18 + 0x20 + read-write + 0x000030D2 + + + MWMC + Memory write mode control + 19 + 1 + + + CRPGS + CRAM page size + 16 + 3 + + + NWASEN + NWAIT in asynchronous transfer enable + 15 + 1 + + + RWTD + Read-write timing different + 14 + 1 + + + NWSEN + NWAIT in synchronous transfer enable + 13 + 1 + + + WEN + Write enable + 12 + 1 + + + NWTCFG + Wait timing configuration + 11 + 1 + + + WRAPEN + Wrapped enable + 10 + 1 + + + NWPOL + NWAIT polarity + 9 + 1 + + + SYNCBEN + Synchronous burst enable + 8 + 1 + + + NOREN + Nor flash access enable + 6 + 1 + + + EXTMDBW + External memory data bus width + 4 + 2 + + + DEV + Memory device type + 2 + 2 + + + ADMUXEN + Address and data multiplexing enable + 1 + 1 + + + EN + Memory bank enable + 0 + 1 + + + + + BK1TMG4 + BK1TMG4 + SRAM/NOR-Flash chip-select timing register + 4 + 0x1C + 0x20 + read-write + 0x0FFFFFFF + + + ASYNCM + Asynchronous mode + 28 + 2 + + + DTLAT + Data latency + 24 + 4 + + + CLKPSC + Clock prescale + 20 + 4 + + + BUSLAT + Bus latency + 16 + 4 + + + DTST + Asynchronous data setup time + 8 + 8 + + + ADDRHT + Address-hold time + 4 + 4 + + + ADDRST + Address setup time + 0 + 4 + + + + + BK2CTRL + BK2CTRL + PC Card/NAND Flash control register + 2 + 0x60 + 0x20 + read-write + 0x00000018 + + + ECCPGS + ECC page size + 17 + 3 + + + TAR + ALE to RE delay + 13 + 4 + + + TCR + CLE to RE delay + 9 + 4 + + + ECCEN + ECC enable + 6 + 1 + + + EXTMDBW + External memory data bus width + 4 + 2 + + + DEV + Memory device type + 3 + 1 + + + EN + Memory bank enable + 2 + 1 + + + NWEN + Wait feature enable + 1 + 1 + + + + + BK2IS + BK2IS + FIFO status and interrupt register + 2 + 0x64 + 0x20 + 0x00000040 + + + FIFOE + FIFO empty + 6 + 1 + read-only + + + FEIEN + Falling edge interrupt enable + 5 + 1 + read-write + + + HLIEN + High-level interrupt enable + 4 + 1 + read-write + + + REIEN + Rising edge interrupt enable + 3 + 1 + read-write + + + FES + Falling edge status + 2 + 1 + read-write + + + HLS + High-level status + 1 + 1 + read-write + + + RES + Rising edge capture status + 0 + 1 + read-write + + + + + BK2TMGRG + BK2TMGRG + Regular memory space timing register + 2 + 0x68 + 0x20 + read-write + 0xFCFCFCFC + + + RGDHIZT + Regular memory databus High resistance time + 24 + 8 + + + RGHT + Regular memory hold time + 16 + 8 + + + RGWT + Regular memory wait time + 8 + 8 + + + RGST + Regular memory setup time + 0 + 8 + + + + + BK2TMGSP + BK2TMGSP + special memory space timing register + 2 + 0x6C + 0x20 + read-write + 0xFCFCFCFC + + + SPDHIZT + special memory databus High resistance time + 24 + 8 + + + SPHT + special memory hold time + 16 + 8 + + + SPWT + special memory wait time + 8 + 8 + + + SPST + special memory setup time + 0 + 8 + + + + + BK2ECC + BK2ECC + ECC result register 2 + 0x74 + 0x20 + read-write + 0x00000000 + + + ECC + ECC result + 0 + 32 + + + + + BK3CTRL + BK3CTRL + PC Card/NAND Flash control register + 3 + 0x80 + 0x20 + read-write + 0x00000018 + + + ECCPGS + ECC page size + 17 + 3 + + + TAR + ALE to RE delay + 13 + 4 + + + TCR + CLE to RE delay + 9 + 4 + + + ECCEN + ECC enable + 6 + 1 + + + EXTMDBW + External memory data bus width + 4 + 2 + + + DEV + Memory device type + 3 + 1 + + + EN + Memory bank enable + 2 + 1 + + + NWEN + Wait feature enable + 1 + 1 + + + + + BK3IS + BK3IS + FIFO status and interrupt register + 3 + 0x84 + 0x20 + 0x00000040 + + + FIFOE + FIFO empty + 6 + 1 + read-only + + + FEIEN + Falling edge interrupt enable + 5 + 1 + read-write + + + HLIEN + High-level interrupt enable + 4 + 1 + read-write + + + REIEN + Rising edge interrupt enable + 3 + 1 + read-write + + + FES + Falling edge status + 2 + 1 + read-write + + + HLS + High-level status + 1 + 1 + read-write + + + RES + Rising edge capture status + 0 + 1 + read-write + + + + + BK3TMGRG + BK3TMGRG + Regular memory space timing register + 3 + 0x88 + 0x20 + read-write + 0xFCFCFCFC + + + RGDHIZT + Regular memory databus High resistance time + 24 + 8 + + + RGHT + Regular memory hold time + 16 + 8 + + + RGWT + Regular memory wait time + 8 + 8 + + + RGST + Regular memory setup time + 0 + 8 + + + + + BK3TMGSP + BK3TMGSP + special memory space timing register + 3 + 0x8C + 0x20 + read-write + 0xFCFCFCFC + + + SPDHIZT + special memory databus High resistance time + 24 + 8 + + + SPHT + special memory hold time + 16 + 8 + + + SPWT + special memory wait time + 8 + 8 + + + SPST + special memory setup time + 0 + 8 + + + + + BK3ECC + BK3ECC + ECC result register 3 + 0x94 + 0x20 + read-write + 0x00000000 + + + ECC + ECC result + 0 + 32 + + + + + BK4CTRL + BK4CTRL + PC Card/NAND Flash control register + 4 + 0xA0 + 0x20 + read-write + 0x00000018 + + + EN + Memory bank enable + 2 + 1 + + + NWEN + Wait feature enable + 1 + 1 + + + + + BK4IS + BK4IS + FIFO status and interrupt register + 4 + 0xA4 + 0x20 + 0x00000040 + + + FIFOE + FIFO empty + 6 + 1 + read-only + + + FEIEN + Falling edge interrupt enable + 5 + 1 + read-write + + + HLIEN + High-level interrupt enable + 4 + 1 + read-write + + + REIEN + Rising edge interrupt enable + 3 + 1 + read-write + + + FES + Falling edge status + 2 + 1 + read-write + + + HLS + High-level status + 1 + 1 + read-write + + + RES + Rising edge capture status + 0 + 1 + read-write + + + + + BK4TMGCM + BK4TMGCM + Regular memory space timing register + 4 + 0xA8 + 0x20 + read-write + 0xFCFCFCFC + + + CMDHIZT + Regular memory databus High resistance time + 24 + 8 + + + CMHT + Regular memory hold time + 16 + 8 + + + CMWT + Regular memory wait time + 8 + 8 + + + CMST + Regular memory setup time + 0 + 8 + + + + + BK4TMGAT + BK4TMGAT + special memory space timing register + 4 + 0xAC + 0x20 + read-write + 0xFCFCFCFC + + + ATDHIZT + special memory databus High resistance time + 24 + 8 + + + ATHT + special memory hold time + 16 + 8 + + + ATWT + special memory wait time + 8 + 8 + + + ATST + special memory setup time + 0 + 8 + + + + + BK4TMGIO + BK4TMGIO + I/O space timing register 4 + 0xB0 + 0x20 + read-write + 0xFCFCFCFC + + + IODHIZT + WRSTP + 24 + 8 + + + IOHT + HLD + 16 + 8 + + + IOWT + OP + 8 + 8 + + + IOST + STP + 0 + 8 + + + + + BK1TMGWR1 + BK1TMGWR1 + SRAM/NOR-Flash write timing registers + 1 + 0x104 + 0x20 + read-write + 0x0FFFFFFF + + + ASYNCM + Asynchronous mode + 28 + 2 + + + BUSLAT + Bus latency + 16 + 4 + + + DTST + Asynchronous data setup time + 8 + 8 + + + ADDRHT + Address-hold time + 4 + 4 + + + ADDRST + Address setup time + 0 + 4 + + + + + BK1TMGWR2 + BK1TMGWR2 + SRAM/NOR-Flash write timing registers + 2 + 0x10C + 0x20 + read-write + 0x0FFFFFFF + + + ASYNCM + Asynchronous mode + 28 + 2 + + + BUSLAT + Bus latency + 16 + 4 + + + DTST + Asynchronous data setup time + 8 + 8 + + + ADDRHT + Address-hold time + 4 + 4 + + + ADDRST + Address setup time + 0 + 4 + + + + + BK1TMGWR3 + BK1TMGWR3 + SRAM/NOR-Flash write timing registers + 3 + 0x114 + 0x20 + read-write + 0x0FFFFFFF + + + ASYNCM + Asynchronous mode + 28 + 2 + + + BUSLAT + Bus latency + 16 + 4 + + + DTST + Asynchronous data setup time + 8 + 8 + + + ADDRHT + Address-hold time + 4 + 4 + + + ADDRST + Address setup time + 0 + 4 + + + + + BK1TMGWR4 + BK1TMGWR4 + SRAM/NOR-Flash write timing registers + 4 + 0x11C + 0x20 + read-write + 0x0FFFFFFF + + + ASYNCM + Asynchronous mode + 28 + 2 + + + BUSLAT + Bus latency + 16 + 4 + + + DTST + Asynchronous data setup time + 8 + 8 + + + ADDRHT + Address-hold time + 4 + 4 + + + ADDRST + Address setup time + 0 + 4 + + + + + CTRL1 + CTRL1 + SDRAM Control Register 1 + 0x140 + 0x20 + read-write + 0x000002D0 + + + CA + Number of column address + bits + 0 + 2 + + + RA + Number of row address bits + 2 + 2 + + + DB + Memory data bus width + 4 + 2 + + + INBK + Number of internal banks + 6 + 1 + + + CAS + CAS latency + 7 + 2 + + + WRP + Write protection + 9 + 1 + + + CLKDIV + Clock division configuration + 10 + 2 + + + BSTR + Burst read + 12 + 1 + + + RD + Read delay + 13 + 2 + + + + + CTRL2 + CTRL2 + SDRAM Control Register 2 + 0x144 + 0x20 + read-write + 0x000002D0 + + + CA + Number of column address + bits + 0 + 2 + + + RA + Number of row address bits + 2 + 2 + + + DB + Memory data bus width + 4 + 2 + + + INBK + Number of internal banks + 6 + 1 + + + CAS + CAS latency + 7 + 2 + + + WRP + Write protection + 9 + 1 + + + CLKDIV + Clock division configuration + 10 + 2 + + + BSTR + Burst read + 12 + 1 + + + RD + Read pipe + 13 + 2 + + + + + TM1 + TM1 + SDRAM Timing register 1 + 0x148 + 0x20 + read-write + 0x0FFFFFFF + + + TMRD + Mode register program to active delay + 0 + 4 + + + TXSR + Exit Self-refresh to active delay + 4 + 4 + + + TRAS + Self refresh time + 8 + 4 + + + TRC + Refresh to active delay + 12 + 4 + + + TWR + Write Recovery delay + 16 + 4 + + + TRP + Precharge to active delay + 20 + 4 + + + TRCD + Row active to Read/Write delay + 24 + 4 + + + + + TM2 + TM2 + SDRAM Timing register 2 + 0x14C + 0x20 + read-write + 0x0FFFFFFF + + + TMRD + Mode register program to active delay + 0 + 4 + + + TXSR + Exit Self-refresh to active delay + 4 + 4 + + + TRAS + Self refresh time + 8 + 4 + + + TRC + Refresh to active delay + 12 + 4 + + + TWR + Write Recovery delay + 16 + 4 + + + TRP + Precharge to active delay + 20 + 4 + + + TRCD + Row active to Read/Write delay + 24 + 4 + + + + + CMD + CMD + SDRAM Command Mode register + 0x150 + 0x20 + 0x00000000 + + + CMD + SDRAM Command + 0 + 3 + write-only + + + BK2 + SDRAM Bank 2 + 3 + 1 + write-only + + + BK1 + SDRAM Bank 1 + 4 + 1 + write-only + + + ART + Auto-refresh times + 5 + 4 + read-write + + + MRD + Mode register data + 9 + 13 + read-write + + + + + RCNT + RCNT + SDRAM Refresh Timer register + 0x154 + 0x20 + 0x00000000 + + + ERRC + error flag clear + 0 + 1 + write-only + + + RC + Refresh Count + 1 + 13 + read-write + + + ERIEN + error Interrupt Enable + 14 + 1 + read-write + + + + + STS + STS + SDRAM Status register + 0x158 + 0x20 + read-only + 0x00000000 + + + ERR + error flag + 0 + 1 + + + BK1STS + Bank 1 Status + 1 + 2 + + + BK2STS + Bank 2 Status + 3 + 2 + + + BUSY + Busy status + 5 + 1 + + + + + EXT1 + EXT1 + externl timeing register 1 + 0x220 + 0x20 + read-write + 0x00000808 + + + BUSLATW2W + Bus turnaround phase for consecutive write duration + 0 + 8 + + + BUSLATR2R + Bus turnaround phase for consecutive read duration + 8 + 8 + + + + + EXT2 + EXT2 + externl timeing register 2 + 0x224 + 0x20 + read-write + 0x00000808 + + + BUSLATW2W + Bus turnaround phase for consecutive write duration + 0 + 8 + + + BUSLATR2R + Bus turnaround phase for consecutive read duration + 8 + 8 + + + + + EXT3 + EXT3 + externl timeing register 3 + 0x228 + 0x20 + read-write + 0x00000808 + + + BUSLATW2W + Bus turnaround phase for consecutive write duration + 0 + 8 + + + BUSLATR2R + Bus turnaround phase for consecutive read duration + 8 + 8 + + + + + EXT4 + EXT4 + externl timeing register 4 + 0x22C + 0x20 + read-write + 0x00000808 + + + BUSLATW2W + Bus turnaround phase for consecutive write duration + 0 + 8 + + + BUSLATR2R + Bus turnaround phase for consecutive read duration + 8 + 8 + + + + + + + PWC + Power control + PWC + 0x40007000 + + 0x0 + 0x400 + registers + + + + CTRL + CTRL + Power control register + (PWC_CTRL) + 0x0 + 0x20 + read-write + 0x00000000 + + + VRSEL + Voltage regulator state select when deepsleep mode + 0 + 1 + + + LPSEL + Low power mode select when Cortex-M4F sleepdeep + 1 + 1 + + + CLSWEF + Clear SWEF flag + 2 + 1 + + + CLSEF + Clear SEF flag + 3 + 1 + + + PVMEN + Power voltage monitoring enable + 4 + 1 + + + PVMSEL + Power voltage monitoring boundary select + 5 + 3 + + + BPWEN + Battery powered domain write enable + 8 + 1 + + + + + CTRLSTS + CTRLSTS + Power control and status register + (PWC_CTRLSTS) + 0x4 + 0x20 + 0x00000000 + + + SWEF + Standby wake-up event flag + 0 + 1 + read-only + + + SEF + Standby mode entry flag + 1 + 1 + read-only + + + PVMOF + Power voltage monitoring output flag + 2 + 1 + read-only + + + SWPEN1 + Standby wake-up pin 1 enable + 8 + 1 + read-write + + + SWPEN2 + Standby wake-up pin 2 enable + 9 + 1 + read-write + + + + + LDOOV + LDOOV + LDO output voltage register + 0x10 + 0x20 + 0x00000000 + + + LDOOVSEL + LDO output voltage select + 0 + 3 + read-write + + + + + + + CRM + Clock and reset management + CRM + 0x40023800 + + 0x0 + 0x400 + registers + + + CRM + CRM global interrupt + 5 + + + + CTRL + CTRL + Clock control register + 0x0 + 0x20 + 0x00000083 + + + HICKEN + High speed internal clock enable + 0 + 1 + read-write + + + HICKSTBL + High speed internal clock ready flag + 1 + 1 + read-only + + + HICKTRIM + High speed internal clock trimming + 2 + 6 + read-write + + + HICKCAL + High speed internal clock calibration + 8 + 8 + read-only + + + HEXTEN + High speed exernal crystal enable + 16 + 1 + read-write + + + HEXTSTBL + High speed exernal crystal ready flag + 17 + 1 + read-only + + + HEXTBYPS + High speed exernal crystal bypass + 18 + 1 + read-write + + + CFDEN + Clock failure detection enable + 19 + 1 + read-write + + + PLLEN + PLL enable + 24 + 1 + read-write + + + PLLSTBL + PLL clock ready flag + 25 + 1 + read-only + + + + + PLLCFG + PLLCFG + PLL configuration register + (CRM_PLLCFG) + 0x4 + 0x20 + 0x00033002 + + + PLL_MS + PLL pre-division + 0 + 4 + read-write + + + PLL_NS + PLL frequency multiplication factor + 6 + 9 + read-write + + + PLL_FR + PLL post-division + 16 + 3 + read-write + + + PLLRCS + PLL reference clock select + 22 + 1 + read-write + + + + + CFG + CFG + Clock configuration register(CRM_CFG) + 0x8 + 0x20 + 0x00000000 + + + SCLKSEL + System clock select + 0 + 2 + read-write + + + SCLKSTS + System Clock select Status + 2 + 2 + read-only + + + AHBDIV + AHB division + 4 + 4 + read-write + + + APB1DIV + APB1 division + 10 + 3 + read-write + + + APB2DIV + APB2 division + 13 + 3 + read-write + + + ERTCDIV + HEXT division for ERTC clock + 16 + 5 + read-write + + + CLKOUT1_SEL + Clock output1 selection + 21 + 2 + read-write + + + CLKOUT1DIV1 + Clock output1 division1 + 24 + 3 + read-write + + + CLKOUT2DIV1 + Clock output2 division1 + 27 + 3 + read-write + + + CLKOUT2_SEL1 + Clock output2 selection1 + 30 + 2 + read-write + + + + + CLKINT + CLKINT + Clock interrupt register + (CRM_CLKINT) + 0xC + 0x20 + 0x00000000 + + + LICKSTBLF + LICK ready interrupt flag + 0 + 1 + read-only + + + LEXTSTBLF + LEXT ready interrupt flag + 1 + 1 + read-only + + + HICKSTBLF + HICK ready interrupt flag + 2 + 1 + read-only + + + HEXTSTBLF + HEXT ready interrupt flag + 3 + 1 + read-only + + + PLLSTBLF + PLL ready interrupt flag + 4 + 1 + read-only + + + CFDF + Clock failure detection interrupt flag + 7 + 1 + read-only + + + LICKSTBLIEN + LICK ready interrupt enable + 8 + 1 + read-write + + + LEXTSTBLIEN + LEXT ready interrupt enable + 9 + 1 + read-write + + + HICKSTBLIEN + HICK ready interrupt enable + 10 + 1 + read-write + + + HEXTSTBLIEN + HEXT ready interrupt enable + 11 + 1 + read-write + + + PLLSTBLIEN + PLL ready interrupt enable + 12 + 1 + read-write + + + LICKSTBLFC + LICK ready interrupt clear + 16 + 1 + write-only + + + LEXTSTBLFC + LEXT ready interrupt clear + 17 + 1 + write-only + + + HICKSTBLFC + HICK ready interrupt clear + 18 + 1 + write-only + + + HEXTSTBLFC + HEXT ready interrupt clear + 19 + 1 + write-only + + + PLLSTBLFC + PLL ready interrupt clear + 20 + 1 + write-only + + + CFDFC + Clock failure detection interrupt clear + 23 + 1 + write-only + + + + + AHBRST1 + AHBRST1 + AHB peripheral reset register1 + (CRM_AHBRST1) + 0x10 + 0x20 + read-write + 0x000000000 + + + GPIOARST + IO port A reset + 0 + 1 + + + GPIOBRST + IO port B reset + 1 + 1 + + + GPIOCRST + IO port C reset + 2 + 1 + + + GPIODRST + IO port D reset + 3 + 1 + + + GPIOERST + IO port E reset + 4 + 1 + + + GPIOFRST + IO port F reset + 5 + 1 + + + GPIOGRST + IO port G reset + 6 + 1 + + + GPIOHRST + IO port H reset + 7 + 1 + + + CRCRST + CRC reset + 12 + 1 + + + EDMARST + EDMA reset + 21 + 1 + + + DMA1RST + DMA1 reset + 22 + 1 + + + DMA2RST + DMA2 reset + 24 + 1 + + + EMACRST + EMAC reset + 25 + 1 + + + OTGFS2RST + OTGFS2 interface reset + 29 + 1 + + + + + AHBRST2 + AHBRST2 + AHB peripheral reset register 2 + (CRM_AHBRST2) + 0x14 + 0x20 + read-write + 0x00000000 + + + DVPRST + DVP reset + 0 + 1 + + + OTGFS1RST + OTGFS1 reset + 7 + 1 + + + SDIO1RST + SDIO1 reset + 15 + 1 + + + + + AHBRST3 + AHBRST3 + AHB peripheral reset register 3 + (CRM_AHBRST3) + 0x18 + 0x20 + read-write + 0x00000000 + + + XMCRST + XMC reset + 0 + 1 + + + QSPI1RST + QSPI1 reset + 1 + 1 + + + QSPI2RST + QSPI2 reset + 14 + 1 + + + SDIO2RST + SDIO2 reset + 15 + 1 + + + + + APB1RST + APB1RST + APB1 peripheral reset register + (CRM_APB1RST) + 0x20 + 0x20 + read-write + 0x00000000 + + + TMR2RST + Timer2 reset + 0 + 1 + + + TMR3RST + Timer3 reset + 1 + 1 + + + TMR4RST + Timer4 reset + 2 + 1 + + + TMR5RST + Timer5 reset + 3 + 1 + + + TMR6RST + Timer6 reset + 4 + 1 + + + TMR7RST + Timer7 reset + 5 + 1 + + + TMR12RST + Timer12 reset + 6 + 1 + + + TMR13RST + Timer13 reset + 7 + 1 + + + TMR14RST + Timer14 reset + 8 + 1 + + + WWDTRST + Window watchdog reset + 11 + 1 + + + SPI2RST + SPI2 reset + 14 + 1 + + + SPI3RST + SPI3 reset + 15 + 1 + + + USART2RST + USART2 reset + 17 + 1 + + + USART3RST + USART3 reset + 18 + 1 + + + UART4RST + UART4 reset + 19 + 1 + + + UART5RST + UART5 reset + 20 + 1 + + + I2C1RST + I2C1 reset + 21 + 1 + + + I2C2RST + I2C2 reset + 22 + 1 + + + I2C3RST + I2C3 reset + 23 + 1 + + + CAN1RST + CAN1 reset + 25 + 1 + + + CAN2RST + CAN2 reset + 26 + 1 + + + PWCRST + PWC reset + 28 + 1 + + + DACRST + DAC reset + 29 + 1 + + + UART7RST + UART7 reset + 30 + 1 + + + UART8RST + UART8 reset + 31 + 1 + + + + + APB2RST + APB2RST + APB2 peripheral reset register + (CRM_APB2RST) + 0x24 + 0x20 + read-write + 0x00000000 + + + TMR1RST + Timer1 reset + 0 + 1 + + + TMR8RST + Timer8 reset + 1 + 1 + + + USART1RST + USART1 reset + 4 + 1 + + + USART6RST + USART6 reset + 5 + 1 + + + ADCRST + ADC reset + 8 + 1 + + + SPI1RST + SPI1 reset + 12 + 1 + + + SPI4RST + SPI4 reset + 13 + 1 + + + SCFGRST + SCFG reset + 14 + 1 + + + TMR9RST + Timer9 reset + 16 + 1 + + + TMR10RST + Timer10 reset + 17 + 1 + + + TMR11RST + Timer 11 reset + 18 + 1 + + + TMR20RST + Timer20 reset + 20 + 1 + + + ACCRST + ACC reset + 29 + 1 + + + + + AHBEN1 + AHBEN1 + AHB Peripheral Clock enable register 1 + (CRM_AHBEN1) + 0x30 + 0x20 + read-write + 0x00000000 + + + GPIOAEN + IO A clock enable + 0 + 1 + + + GPIOBEN + IO B clock enable + 1 + 1 + + + GPIOCEN + IO C clock enable + 2 + 1 + + + GPIODEN + IO D clock enable + 3 + 1 + + + GPIOEEN + IO E clock enable + 4 + 1 + + + GPIOFEN + IO F clock enable + 5 + 1 + + + GPIOGEN + IO G clock enable + 6 + 1 + + + GPIOHEN + IO H clock enable + 7 + 1 + + + CRCEN + CRC clock enable + 12 + 1 + + + EDMAEN + DMA1 clock enable + 21 + 1 + + + DMA1EN + DMA1 clock enable + 22 + 1 + + + DMA2EN + DMA2 clock enable + 24 + 1 + + + EMACEN + EMAC clock enable + 25 + 1 + + + EMACTXEN + EMAC Tx clock enable + 26 + 1 + + + EMACRXEN + EMAC Rx clock enable + 27 + 1 + + + EMACPTPEN + EMAC PTP clock enable + 28 + 1 + + + OTGFS2EN + OTGFS2 clock enable + 29 + 1 + + + + + AHBEN2 + AHBEN2 + AHB peripheral clock enable register 2 + (CRM_AHBEN2) + 0x34 + 0x20 + read-write + 0x00000000 + + + DVPEN + DVP clock enable + 0 + 1 + + + OTGFS1EN + OTGFS1 clock enable + 7 + 1 + + + SDIO1EN + SDIO1 clock enable + 15 + 1 + + + + + AHBEN3 + AHBEN3 + AHB peripheral clock enable register 3 + (CRM_AHBEN3) + 0x38 + 0x20 + read-write + 0x00000000 + + + XMCEN + XMC clock enable + 0 + 1 + + + QSPI1EN + QSPI1 clock enable + 1 + 1 + + + QSPI2EN + QSPI2 clock enable + 14 + 1 + + + SDIO2EN + SDIO 2 clock enable + 15 + 1 + + + + + APB1EN + APB1EN + APB1 peripheral clock enable register + (CRM_APB1EN) + 0x40 + 0x20 + read-write + 0x00000000 + + + TMR2EN + Timer2 clock enable + 0 + 1 + + + TMR3EN + Timer3 clock enable + 1 + 1 + + + TMR4EN + Timer4 clock enable + 2 + 1 + + + TMR5EN + Timer5 clock enable + 3 + 1 + + + TMR6EN + Timer6 clock enable + 4 + 1 + + + TMR7EN + Timer7 clock enable + 5 + 1 + + + TMR12EN + Timer12 clock enable + 6 + 1 + + + TMR13EN + Timer13 clock enable + 7 + 1 + + + TMR14EN + Timer14 clock enable + 8 + 1 + + + WWDTEN + WWDT clock enable + 11 + 1 + + + SPI2EN + SPI2 clock enable + 14 + 1 + + + SPI3EN + SPI3 clock enable + 15 + 1 + + + USART2EN + USART2 clock enable + 17 + 1 + + + USART3EN + USART3 clock enable + 18 + 1 + + + UART4EN + UART4 clock enable + 19 + 1 + + + UART5EN + UART5 clock enable + 20 + 1 + + + I2C1EN + I2C1 clock enable + 21 + 1 + + + I2C2EN + I2C2 clock enable + 22 + 1 + + + I2C3EN + I2C3 clock enable + 23 + 1 + + + CAN1EN + CAN1 clock enable + 25 + 1 + + + CAN2EN + CAN2 clock enable + 26 + 1 + + + PWCEN + PWC clock enable + 28 + 1 + + + DACEN + DAC clock enable + 29 + 1 + + + UART7EN + UART7 clock enable + 30 + 1 + + + UART8EN + UART8 clock enable + 31 + 1 + + + + + APB2EN + APB2EN + APB2 peripheral clock enable register + (CRM_APB2EN) + 0x44 + 0x20 + read-write + 0x00000000 + + + TMR1EN + Timer1 clock enable + 0 + 1 + + + TMR8EN + Timer8 clock enable + 1 + 1 + + + USART1EN + USART1 clock enable + 4 + 1 + + + USART6EN + USART6 clock enable + 5 + 1 + + + ADC1EN + ADC1 clock enable + 8 + 1 + + + ADC2EN + ADC2 clock enable + 9 + 1 + + + ADC3EN + ADC3 clock enable + 10 + 1 + + + SPI1EN + SPI1 clock enable + 12 + 1 + + + SPI4EN + SPI4 clock enable + 13 + 1 + + + SCFGEN + SCFG clock enable + 14 + 1 + + + TMR9EN + Timer9 clock enable + 16 + 1 + + + TMR10EN + Timer10 clock enable + 17 + 1 + + + TMR11EN + Timer11 clock enable + 18 + 1 + + + TMR20EN + Timer20 clock enable + 20 + 1 + + + ACCEN + ACC clock enable + 29 + 1 + + + + + AHBLPEN1 + AHBLPEN1 + AHB Low-power Peripheral Clock enable + register 1 (CRM_AHBLPEN1) + 0x50 + 0x20 + read-write + 0x3E6390FF + + + GPIOALPEN + IO A clock enable during sleep mode + 0 + 1 + + + GPIOBLPEN + IO B clock enable during sleep mode + 1 + 1 + + + GPIOCLPEN + IO C clock enable during sleep mode + 2 + 1 + + + GPIODLPEN + IO D clock enable during sleep mode + 3 + 1 + + + GPIOELPEN + IO E clock enable during sleep mode + 4 + 1 + + + GPIOFLPEN + IO F clock enable during sleep mode + 5 + 1 + + + GPIOGLPEN + IO G clock enable during sleep mode + 6 + 1 + + + GPIOHLPEN + IO H clock enable during sleep mode + 7 + 1 + + + CRCLPEN + CRC clock enable during sleep mode + 12 + 1 + + + FLASHLPEN + Flash clock enable during sleep mode + 15 + 1 + + + SRAM1LPEN + SRAM1 clock enable during sleep mode + 16 + 1 + + + SRAM2LPEN + SRAM2 clock enable during sleep mode + 17 + 1 + + + EDMALPEN + EDMA clock enable during sleep mode + 21 + 1 + + + DMA1LPEN + DMA1 clock enable during sleep mode + 22 + 1 + + + DMA2LPEN + DMA2 clock enable during sleep mode + 24 + 1 + + + EMACLPEN + EMAC clock enable during sleep mode + 25 + 1 + + + EMACTXLPEN + EMAC Tx clock enable during sleep mode + 26 + 1 + + + EMACRXLPEN + EMAC Rx clock enable during sleep mode + 27 + 1 + + + EMACPTPLPEN + EMAC PTP clock enable during sleep mode + 28 + 1 + + + OTGFS2LPEN + OTGFS2 clock enable during sleep mode + 29 + 1 + + + + + AHBLPEN2 + AHBLPEN2 + AHB peripheral Low-power clock + enable register 2 (CRM_AHBLPEN2) + 0x54 + 0x20 + read-write + 0x00008081 + + + DVPLPEN + DVP clock enable during sleep mode + 0 + 1 + + + OTGFS1LPEN + OTGFS1 clock enable during sleep mode + 7 + 1 + + + SDIO1LPEN + SDIO1 clock enable during sleep mode + 15 + 1 + + + + + AHBLPEN3 + AHBLPEN3 + AHB peripheral Low-power clock + enable register 3 (CRM_AHBLPEN3) + 0x58 + 0x20 + read-write + 0x0000C003 + + + XMCLPEN + XMC clock enable during sleep mode + 0 + 1 + + + QSPI1LPEN + QSPI1 clock enable during sleep mode + 1 + 1 + + + QSPI2LPEN + QSPI2 clock enable during sleep mode + 14 + 1 + + + SDIO2LPEN + SDIO2 clock enable during sleep mode + 15 + 1 + + + + + APB1LPEN + APB1LPEN + APB1 peripheral Low-power clock + enable register (CRM_APB1LPEN) + 0x60 + 0x20 + read-write + 0xF6FEE9FF + + + TMR2LPEN + Timer2 clock enable during sleep mode + 0 + 1 + + + TMR3LPEN + Timer3 clock enable during sleep mode + 1 + 1 + + + TMR4LPEN + Timer4 clock enable during sleep mode + 2 + 1 + + + TMR5LPEN + Timer5 clock enable during sleep mode + 3 + 1 + + + TMR6LPEN + Timer6 clock enable during sleep mode + 4 + 1 + + + TMR7LPEN + Timer7 clock enable during sleep mode + 5 + 1 + + + TMR12LPEN + Timer12 clock enable during sleep mode + 6 + 1 + + + TMR13LPEN + Timer13 clock enable during sleep mode + 7 + 1 + + + TMR14LPEN + Timer14 clock enable during sleep mode + 8 + 1 + + + WWDTLPEN + WWDT clock enable during sleep mode + 11 + 1 + + + SPI2LPEN + SPI2 clock enable during sleep mode + 14 + 1 + + + SPI3LPEN + SPI3 clock enable during sleep mode + 15 + 1 + + + USART2LPEN + USART2 clock enable during sleep mode + 17 + 1 + + + USART3LPEN + USART3 clock enable during sleep mode + 18 + 1 + + + UART4LPEN + UART4 clock enable during sleep mode + 19 + 1 + + + UART5LPEN + UART5 clock enable during sleep mode + 20 + 1 + + + I2C1CPEN + I2C1 clock enable during sleep mode + 21 + 1 + + + I2C2CPEN + I2C2 clock enable during sleep mode + 22 + 1 + + + I2C3CPEN + I2C3 clock enable during sleep mode + 23 + 1 + + + CAN1LPEN + CAN1 clock enable during sleep mode + 25 + 1 + + + CAN2LPEN + CAN2 clock enable during sleep mode + 26 + 1 + + + PWCLPEN + PWC clock enable during sleep mode + 28 + 1 + + + DACLPEN + DAC clock enable during sleep mode + 29 + 1 + + + UART7LPEN + UART7 clock enable during sleep mode + 30 + 1 + + + UART8LPEN + UART8 clock enable during sleep mode + 31 + 1 + + + + + APB2LPEN + APB2LPEN + APB2 peripheral Low-power clock + enable register (CRM_APB2LPEN) + 0x64 + 0x20 + read-write + 0x20177733 + + + TMR1LPEN + Timer1 clock enable during sleep mode + 0 + 1 + + + TMR8LPEN + Timer8 clock enable during sleep mode + 1 + 1 + + + USART1LPEN + USART1 clock enable during sleep mode + 4 + 1 + + + USART6LPEN + USART6 clock enable during sleep mode + 5 + 1 + + + ADC1CPEN + ADC1 clock enable during sleep mode + 8 + 1 + + + ADC2CPEN + ADC2 clock enable during sleep mode + 9 + 1 + + + ADC3EN + ADC3 clock enable during sleep mode + 10 + 1 + + + SPI1LPEN + SPI1 clock enable during sleep mode + 12 + 1 + + + SPI4LPEN + SPI4 clock enable during sleep mode + 13 + 1 + + + SCFGLPEN + SCFG clock enable during sleep mode + 14 + 1 + + + TMR9LPEN + Timer9 clock enable during sleep mode + 16 + 1 + + + TMR10LPEN + Timer10 clock enable during sleep mode + 17 + 1 + + + TMR11LPEN + Timer11 clock enable during sleep mode + 18 + 1 + + + TMR20LPEN + Timer20 clock enable during sleep mode + 20 + 1 + + + ACCLPEN + ACC clock enable during sleep mode + 29 + 1 + + + + + BPDC + BPDC + Battery powered domain control register + (CRM_BPDC) + 0x70 + 0x20 + 0x00000000 + + + LEXTEN + Low speed external crystal enable + 0 + 1 + read-write + + + LEXTSTBL + Low speed external crystal ready + 1 + 1 + read-only + + + LEXTBYPS + Low speed external crystal bypass + 2 + 1 + read-write + + + ERTCSEL + ERTC clock source selection + 8 + 2 + read-write + + + ERTCEN + ERTC clock enable + 15 + 1 + read-write + + + BPDRST + Battery powered domain software reset + 16 + 1 + read-write + + + + + CTRLSTS + CTRLSTS + Control/status register + (CRM_CTRLSTS) + 0x74 + 0x20 + 0x0C000000 + + + LICKEN + Low speed internal clock enable + 0 + 1 + read-write + + + LICKSTBL + Low speed internal clock ready + 1 + 1 + read-only + + + RSTFC + Reset reset flag + 24 + 1 + read-write + + + NRSTF + PIN reset flag + 26 + 1 + read-write + + + PORRSTF + POR/LVR reset flag + 27 + 1 + read-write + + + SWRSTF + Software reset flag + 28 + 1 + read-write + + + WDTRSTF + Watchdog timer reset flag + 29 + 1 + read-write + + + WWDTRSTF + Window watchdog timer reset flag + 30 + 1 + read-write + + + LPRSTF + Low-power reset flag + 31 + 1 + read-write + + + + + MISC1 + MISC1 + Miscellaneous register1 + 0xA0 + 0x20 + 0x00000000 + + + HICKCAL_KEY + HICKCAL write key value + 0 + 8 + read-write + + + HICKDIV + HICK 6 divider selection + 12 + 1 + read-write + + + HICK_TO_USB + HICK to usb clock + 13 + 1 + read-write + + + HICK_TO_SCLK + HICK to system clock + 14 + 1 + read-write + + + CLKOUT2_SEL2 + Clock output2 select2 + 16 + 4 + read-write + + + CLKOUT1DIV2 + Clock output1 division2 + 24 + 4 + read-write + + + CLKOUT2DIV2 + Clock output2 division2 + 28 + 4 + read-write + + + + + MISC2 + MISC2 + Miscellaneous register2 + 0xA4 + 0x20 + 0x0000000D + + + AUTO_STEP_EN + AUTO_STEP_EN + 4 + 2 + read-write + + + CLK_TO_TMR + Clock output internal connect to timer10 + 8 + 1 + read-write + + + USBDIV + USB division + 12 + 4 + read-write + + + + + + + GPIOA + General purpose I/Os + GPIO + 0x40020000 + + 0x0 + 0x400 + registers + + + + CFGR + CFGR + GPIO configuration register + 0x0 + 0x20 + read-write + 0x00000000 + + + IOMC15 + GPIOx pin 15 mode configurate + 30 + 2 + + + IOMC14 + GPIOx pin 14 mode configurate + 28 + 2 + + + IOMC13 + GPIOx pin 13 mode configurate + 26 + 2 + + + IOMC12 + GPIOx pin 12 mode configurate + 24 + 2 + + + IOMC11 + GPIOx pin 11 mode configurate + 22 + 2 + + + IOMC10 + GPIOx pin 10 mode configurate + 20 + 2 + + + IOMC9 + GPIOx pin 9 mode configurate + 18 + 2 + + + IOMC8 + GPIOx pin 8 mode configurate + 16 + 2 + + + IOMC7 + GPIOx pin 7 mode configurate + 14 + 2 + + + IOMC6 + GPIOx pin 6 mode configurate + 12 + 2 + + + IOMC5 + GPIOx pin 5 mode configurate + 10 + 2 + + + IOMC4 + GPIOx pin 4 mode configurate + 8 + 2 + + + IOMC3 + GPIOx pin 3 mode configurate + 6 + 2 + + + IOMC2 + GPIOx pin 2 mode configurate + 4 + 2 + + + IOMC1 + GPIOx pin 1 mode configurate + 2 + 2 + + + IOMC0 + GPIOx pin 0 mode configurate + 0 + 2 + + + + + OMODE + OMODE + GPIO output mode register + 0x4 + 0x20 + read-write + 0x00000000 + + + OM15 + GPIOx pin 15 outpu mode configurate + 15 + 1 + + + OM14 + GPIOx pin 14 outpu mode configurate + 14 + 1 + + + OM13 + GPIOx pin 13 outpu mode configurate + 13 + 1 + + + OM12 + GPIOx pin 12 outpu mode configurate + 12 + 1 + + + OM11 + GPIOx pin 11 outpu mode configurate + 11 + 1 + + + OM10 + GPIOx pin 10 outpu mode configurate + 10 + 1 + + + OM9 + GPIOx pin 9 outpu mode configurate + 9 + 1 + + + OM8 + GPIOx pin 8 outpu mode configurate + 8 + 1 + + + OM7 + GPIOx pin 7 outpu mode configurate + 7 + 1 + + + OM6 + GPIOx pin 6 outpu mode configurate + 6 + 1 + + + OM5 + GPIOx pin 5 outpu mode configurate + 5 + 1 + + + OM4 + GPIOx pin 4 outpu mode configurate + 4 + 1 + + + OM3 + GPIOx pin 3 outpu mode configurate + 3 + 1 + + + OM2 + GPIOx pin 2 outpu mode configurate + 2 + 1 + + + OM1 + GPIOx pin 1 outpu mode configurate + 1 + 1 + + + OM0 + GPIOx pin 0 outpu mode configurate + 0 + 1 + + + + + ODRVR + ODRVR + GPIO drive capability register + 0x8 + 0x20 + read-write + 0x00000000 + + + ODRV15 + GPIOx pin 15 output drive capability + 30 + 2 + + + ODRV14 + GPIOx pin 14 output drive capability + 28 + 2 + + + ODRV13 + GPIOx pin 13 output drive capability + 26 + 2 + + + ODRV12 + GPIOx pin 12 output drive capability + 24 + 2 + + + ODRV11 + GPIOx pin 11 output drive capability + 22 + 2 + + + ODRV10 + GPIOx pin 10 output drive capability + 20 + 2 + + + ODRV9 + GPIOx pin 9 output drive capability + 18 + 2 + + + ODRV8 + GPIOx pin 8 output drive capability + 16 + 2 + + + ODRV7 + GPIOx pin 7 output drive capability + 14 + 2 + + + ODRV6 + GPIOx pin 6 output drive capability + 12 + 2 + + + ODRV5 + GPIOx pin 5 output drive capability + 10 + 2 + + + ODRV4 + GPIOx pin 4 output drive capability + 8 + 2 + + + ODRV3 + GPIOx pin 3 output drive capability + 6 + 2 + + + ODRV2 + GPIOx pin 2 output drive capability + 4 + 2 + + + ODRV1 + GPIOx pin 1 output drive capability + 2 + 2 + + + ODRV0 + GPIOx pin 0 output drive capability + 0 + 2 + + + + + PULL + PULL + GPIO pull-up/pull-down register + 0xC + 0x20 + read-write + 0x00000000 + + + PULL15 + GPIOx pin 15 pull configuration + 30 + 2 + + + PULL14 + GPIOx pin 14 pull configuration + 28 + 2 + + + PULL13 + GPIOx pin 13 pull configuration + 26 + 2 + + + PULL12 + GPIOx pin 12 pull configuration + 24 + 2 + + + PULL11 + GPIOx pin 11 pull configuration + 22 + 2 + + + PULL10 + GPIOx pin 10 pull configuration + 20 + 2 + + + PULL9 + GPIOx pin 9 pull configuration + 18 + 2 + + + PULL8 + GPIOx pin 8 pull configuration + 16 + 2 + + + PULL7 + GPIOx pin 7 pull configuration + 14 + 2 + + + PULL6 + GPIOx pin 6 pull configuration + 12 + 2 + + + PULL5 + GPIOx pin 5 pull configuration + 10 + 2 + + + PULL4 + GPIOx pin 4 pull configuration + 8 + 2 + + + PULL3 + GPIOx pin 3 pull configuration + 6 + 2 + + + PULL2 + GPIOx pin 2 pull configuration + 4 + 2 + + + PULL1 + GPIOx pin 1 pull configuration + 2 + 2 + + + PULL0 + GPIOx pin 0 pull configuration + 0 + 2 + + + + + IDT + IDT + GPIO input data register + 0x10 + 0x20 + read-only + 0x00000000 + + + IDT0 + Port input data + 0 + 1 + + + IDT1 + Port input data + 1 + 1 + + + IDT2 + Port input data + 2 + 1 + + + IDT3 + Port input data + 3 + 1 + + + IDT4 + Port input data + 4 + 1 + + + IDT5 + Port input data + 5 + 1 + + + IDT6 + Port input data + 6 + 1 + + + IDT7 + Port input data + 7 + 1 + + + IDT8 + Port input data + 8 + 1 + + + IDT9 + Port input data + 9 + 1 + + + IDT10 + Port input data + 10 + 1 + + + IDT11 + Port input data + 11 + 1 + + + IDT12 + Port input data + 12 + 1 + + + IDT13 + Port input data + 13 + 1 + + + IDT14 + Port input data + 14 + 1 + + + IDT15 + Port input data + 15 + 1 + + + + + ODT + ODT + GPIO output data register + 0x14 + 0x20 + read-write + 0x00000000 + + + ODT0 + Port output data + 0 + 1 + + + ODT1 + Port output data + 1 + 1 + + + ODT2 + Port output data + 2 + 1 + + + ODT3 + Port output data + 3 + 1 + + + ODT4 + Port output data + 4 + 1 + + + ODT5 + Port output data + 5 + 1 + + + ODT6 + Port output data + 6 + 1 + + + ODT7 + Port output data + 7 + 1 + + + ODT8 + Port output data + 8 + 1 + + + ODT9 + Port output data + 9 + 1 + + + ODT10 + Port output data + 10 + 1 + + + ODT11 + Port output data + 11 + 1 + + + ODT12 + Port output data + 12 + 1 + + + ODT13 + Port output data + 13 + 1 + + + ODT14 + Port output data + 14 + 1 + + + ODT15 + Port output data + 15 + 1 + + + + + SCR + SCR + Port bit set/clear register + 0x18 + 0x20 + write-only + 0x00000000 + + + IOSB0 + Set bit 0 + 0 + 1 + + + IOSB1 + Set bit 1 + 1 + 1 + + + IOSB2 + Set bit 1 + 2 + 1 + + + IOSB3 + Set bit 3 + 3 + 1 + + + IOSB4 + Set bit 4 + 4 + 1 + + + IOSB5 + Set bit 5 + 5 + 1 + + + IOSB6 + Set bit 6 + 6 + 1 + + + IOSB7 + Set bit 7 + 7 + 1 + + + IOSB8 + Set bit 8 + 8 + 1 + + + IOSB9 + Set bit 9 + 9 + 1 + + + IOSB10 + Set bit 10 + 10 + 1 + + + IOSB11 + Set bit 11 + 11 + 1 + + + IOSB12 + Set bit 12 + 12 + 1 + + + IOSB13 + Set bit 13 + 13 + 1 + + + IOSB14 + Set bit 14 + 14 + 1 + + + IOSB15 + Set bit 15 + 15 + 1 + + + IOCB0 + Clear bit 0 + 16 + 1 + + + IOCB1 + Clear bit 1 + 17 + 1 + + + IOCB2 + Clear bit 2 + 18 + 1 + + + IOCB3 + Clear bit 3 + 19 + 1 + + + IOCB4 + Clear bit 4 + 20 + 1 + + + IOCB5 + Clear bit 5 + 21 + 1 + + + IOCB6 + Clear bit 6 + 22 + 1 + + + IOCB7 + Clear bit 7 + 23 + 1 + + + IOCB8 + Clear bit 8 + 24 + 1 + + + IOCB9 + Clear bit 9 + 25 + 1 + + + IOCB10 + Clear bit 10 + 26 + 1 + + + IOCB11 + Clear bit 11 + 27 + 1 + + + IOCB12 + Clear bit 12 + 28 + 1 + + + IOCB13 + Clear bit 13 + 29 + 1 + + + IOCB14 + Clear bit 14 + 30 + 1 + + + IOCB15 + Clear bit 15 + 31 + 1 + + + + + WPR + WPR + Port write protect + register + 0x1C + 0x20 + read-write + 0x00000000 + + + WPEN0 + Write protect enable 0 + 0 + 1 + + + WPEN1 + Write protect enable 1 + 1 + 1 + + + WPEN2 + Write protect enable 2 + 2 + 1 + + + WPEN3 + Write protect enable 3 + 3 + 1 + + + WPEN4 + Write protect enable 4 + 4 + 1 + + + WPEN5 + Write protect enable 5 + 5 + 1 + + + WPEN6 + Write protect enable 6 + 6 + 1 + + + WPEN7 + Write protect enable 7 + 7 + 1 + + + WPEN8 + Write protect enable 8 + 8 + 1 + + + WPEN9 + Write protect enable 9 + 9 + 1 + + + WPEN10 + Write protect enable 10 + 10 + 1 + + + WPEN11 + Write protect enable 11 + 11 + 1 + + + WPEN12 + Write protect enable 12 + 12 + 1 + + + WPEN13 + Write protect enable 13 + 13 + 1 + + + WPEN14 + Write protect enable 14 + 14 + 1 + + + WPEN15 + Write protect enable 15 + 15 + 1 + + + WPSEQ + Write protect sequence + 16 + 1 + + + + + MUXL + MUXL + GPIO muxing function low register + 0x20 + 0x20 + read-write + 0x00000000 + + + MUXL7 + GPIOx pin 7 muxing + 28 + 4 + + + MUXL6 + GPIOx pin 6 muxing + 24 + 4 + + + MUXL5 + GPIOx pin 5 muxing + 20 + 4 + + + MUXL4 + GPIOx pin 4 muxing + 16 + 4 + + + MUXL3 + GPIOx pin 3 muxing + 12 + 4 + + + MUXL2 + GPIOx pin 2 muxing + 8 + 4 + + + MUXL1 + GPIOx pin 1 muxing + 4 + 4 + + + MUXL0 + GPIOx pin 0 muxing + 0 + 4 + + + + + MUXH + MUXH + GPIO muxing function high register + 0x24 + 0x20 + read-write + 0x00000000 + + + MUXH15 + GPIOx pin 15 muxing + 28 + 4 + + + MUXH14 + GPIOx pin 14 muxing + 24 + 4 + + + MUXH13 + GPIOx pin 13 muxing + 20 + 4 + + + MUXH12 + GPIOx pin 12 muxing + 16 + 4 + + + MUXH11 + GPIOx pin 11 muxing + 12 + 4 + + + MUXH10 + GPIOx pin 10 muxing + 8 + 4 + + + MUXH9 + GPIOx pin 9 muxing + 4 + 4 + + + MUXH8 + GPIOx pin 8 muxing + 0 + 4 + + + + + CLR + CLR + GPIO bit reset register + 0x28 + 0x20 + write-only + 0x00000000 + + + IOCB0 + Clear bit 0 + 0 + 1 + + + IOCB1 + Clear bit 1 + 1 + 1 + + + IOCB2 + Clear bit 1 + 2 + 1 + + + IOCB3 + Clear bit 3 + 3 + 1 + + + IOCB4 + Clear bit 4 + 4 + 1 + + + IOCB5 + Clear bit 5 + 5 + 1 + + + IOCB6 + Clear bit 6 + 6 + 1 + + + IOCB7 + Clear bit 7 + 7 + 1 + + + IOCB8 + Clear bit 8 + 8 + 1 + + + IOCB9 + Clear bit 9 + 9 + 1 + + + IOCB10 + Clear bit 10 + 10 + 1 + + + IOCB11 + Clear bit 11 + 11 + 1 + + + IOCB12 + Clear bit 12 + 12 + 1 + + + IOCB13 + Clear bit 13 + 13 + 1 + + + IOCB14 + Clear bit 14 + 14 + 1 + + + IOCB15 + Clear bit 15 + 15 + 1 + + + + + HDRV + HDRV + Huge current driver + 0x3C + 0x20 + read-write + 0x00000000 + + + HDRV0 + Port x driver bit y + 0 + 1 + + + HDRV1 + Port x driver bit y + 1 + 1 + + + HDRV2 + Port x driver bit y + 2 + 1 + + + HDRV3 + Port x driver bit y + 3 + 1 + + + HDRV4 + Port x driver bit y + 4 + 1 + + + HDRV5 + Port x driver bit y + 5 + 1 + + + HDRV6 + Port x driver bit y + 6 + 1 + + + HDRV7 + Port x driver bit y + 7 + 1 + + + HDRV8 + Port x driver bit y + 8 + 1 + + + HDRV9 + Port x driver bit y + 9 + 1 + + + HDRV10 + Port x driver bit y + 10 + 1 + + + HDRV11 + Port x driver bit y + 11 + 1 + + + HDRV12 + Port x driver bit y + 12 + 1 + + + HDRV13 + Port x driver bit y + 13 + 1 + + + HDRV14 + Port x driver bit y + 14 + 1 + + + HDRV15 + Port x driver bit y + 15 + 1 + + + + + + + GPIOB + 0x40020400 + + + GPIOC + 0x40020800 + + + GPIOD + 0x40020C00 + + + GPIOE + 0x40021000 + + + GPIOF + 0x40021400 + + + GPIOG + 0x40021800 + + + GPIOH + 0x40021C00 + + + EXINT + EXINT + EXINT + 0x40013C00 + + 0x0 + 0x400 + registers + + + EXINT0 + EXINT Line0 interrupt + 6 + + + EXINT1 + EXINT Line1 interrupt + 7 + + + EXINT2 + EXINT Line2 interrupt + 8 + + + EXINT3 + EXINT Line3 interrupt + 9 + + + EXINT4 + EXINT Line4 interrupt + 10 + + + EXINT9_5 + EXINT Line[9:5] interrupts + 23 + + + EXINT15_10 + EXINT Line[15:10] interrupts + 40 + + + PVM + PVM interrupt connect to EXINT line16 + 1 + + + ERTCALARM + ERTC Alarm interrupt connect to EXINT line17 + 41 + + + OTGFS1_WKUP + OTGFS1_WKUP interrupt connect to EXINT line18 + 42 + + + EMAC_WKUP + EMAC_WKUP interrupt connect to EXINT line19 + 62 + + + OTGFS2_WKUP + OTGFS2_WKUP interrupt connect to EXINT line20 + 76 + + + TAMPER + Tamper interrupt connect to EXINT line21 + 2 + + + ERTC_WKUP + ERTC Global interrupt connect to EXINT line22 + 3 + + + + INTEN + INTEN + Interrupt enable register + 0x0 + 0x20 + read-write + 0x00000000 + + + INTEN0 + Interrupt enable or disable on line 0 + 0 + 1 + + + INTEN1 + Interrupt enable or disable on line 1 + 1 + 1 + + + INTEN2 + Interrupt enable or disable on line 2 + 2 + 1 + + + INTEN3 + Interrupt enable or disable on line 3 + 3 + 1 + + + INTEN4 + Interrupt enable or disable on line 4 + 4 + 1 + + + INTEN5 + Interrupt enable or disable on line 5 + 5 + 1 + + + INTEN6 + Interrupt enable or disable on line 6 + 6 + 1 + + + INTEN7 + Interrupt enable or disable on line 7 + 7 + 1 + + + INTEN8 + Interrupt enable or disable on line 8 + 8 + 1 + + + INTEN9 + Interrupt enable or disable on line 9 + 9 + 1 + + + INTEN10 + Interrupt enable or disable on line 10 + 10 + 1 + + + INTEN11 + Interrupt enable or disable on line 11 + 11 + 1 + + + INTEN12 + Interrupt enable or disable on line 12 + 12 + 1 + + + INTEN13 + Interrupt enable or disable on line 13 + 13 + 1 + + + INTEN14 + Interrupt enable or disable on line 14 + 14 + 1 + + + INTEN15 + Interrupt enable or disable on line 15 + 15 + 1 + + + INTEN16 + Interrupt enable or disable on line 16 + 16 + 1 + + + INTEN17 + Interrupt enable or disable on line 17 + 17 + 1 + + + INTEN18 + Interrupt enable or disable on line 18 + 18 + 1 + + + INTEN19 + Interrupt enable or disable on line 19 + 19 + 1 + + + INTEN20 + Interrupt enable or disable on line 20 + 20 + 1 + + + INTEN21 + Interrupt enable or disable on line 21 + 21 + 1 + + + INTEN22 + Interrupt enable or disable on line 22 + 22 + 1 + + + + + EVTEN + EVTEN + Event enable register + 0x4 + 0x20 + read-write + 0x00000000 + + + EVTEN0 + Event enable or disable on line 0 + 0 + 1 + + + EVTEN1 + Event enable or disable on line 1 + 1 + 1 + + + EVTEN2 + Event enable or disable on line 2 + 2 + 1 + + + EVTEN3 + Event enable or disable on line 3 + 3 + 1 + + + EVTEN4 + Event enable or disable on line 4 + 4 + 1 + + + EVTEN5 + Event enable or disable on line 5 + 5 + 1 + + + EVTEN6 + Event enable or disable on line 6 + 6 + 1 + + + EVTEN7 + Event enable or disable on line 7 + 7 + 1 + + + EVTEN8 + Event enable or disable on line 8 + 8 + 1 + + + EVTEN9 + Event enable or disable on line 9 + 9 + 1 + + + EVTEN10 + Event enable or disable on line 10 + 10 + 1 + + + EVTEN11 + Event enable or disable on line 11 + 11 + 1 + + + EVTEN12 + Event enable or disable on line 12 + 12 + 1 + + + EVTEN13 + Event enable or disable on line 13 + 13 + 1 + + + EVTEN14 + Event enable or disable on line 14 + 14 + 1 + + + EVTEN15 + Event enable or disable on line 15 + 15 + 1 + + + EVTEN16 + Event enable or disable on line 16 + 16 + 1 + + + EVTEN17 + Event enable or disable on line 17 + 17 + 1 + + + EVTEN18 + Event enable or disable on line 18 + 18 + 1 + + + EVTEN19 + Event enable or disable on line 19 + 19 + 1 + + + EVTEN20 + Event enable or disable on line 20 + 20 + 1 + + + EVTEN21 + Event enable or disable on line 21 + 21 + 1 + + + EVTEN22 + Event enable or disable on line 22 + 22 + 1 + + + + + POLCFG1 + POLCFG1 + Rising polarity configuration register + 0x8 + 0x20 + read-write + 0x00000000 + + + RP0 + Rising polarity configuration bit of line 0 + 0 + 1 + + + RP1 + Rising polarity configuration bit of line 1 + 1 + 1 + + + RP2 + Rising polarity configuration bit of line 2 + 2 + 1 + + + RP3 + Rising polarity configuration bit of line 3 + 3 + 1 + + + RP4 + Rising polarity configuration bit of line 4 + 4 + 1 + + + RP5 + Rising polarity configuration bit of line 5 + 5 + 1 + + + RP6 + Rising polarity configuration bit of linee 6 + 6 + 1 + + + RP7 + Rising polarity configuration bit of line 7 + 7 + 1 + + + RP8 + Rising polarity configuration bit of line 8 + 8 + 1 + + + RP9 + Rising polarity configuration bit of line 9 + 9 + 1 + + + RP10 + Rising polarity configuration bit of line 10 + 10 + 1 + + + RP11 + Rising polarity configuration bit of line 11 + 11 + 1 + + + RP12 + Rising polarity configuration bit of line 12 + 12 + 1 + + + RP13 + Rising polarity configuration bit of line 13 + 13 + 1 + + + RP14 + Rising polarity configuration bit of line 14 + 14 + 1 + + + RP15 + Rising polarity configuration bit of line 15 + 15 + 1 + + + RP16 + Rising polarity configuration bit of line 16 + 16 + 1 + + + RP17 + Rising polarity configuration bit of line 17 + 17 + 1 + + + RP18 + Rising polarity configuration bit of line 18 + 18 + 1 + + + RP19 + Rising polarity configuration bit of line 19 + 19 + 1 + + + RP20 + Rising polarity configuration bit of line 20 + 20 + 1 + + + RP21 + Rising polarity configuration bit of line 21 + 21 + 1 + + + RP22 + Rising polarity configuration bit of line 22 + 22 + 1 + + + + + POLCFG2 + POLCFG2 + Falling polarity configuration register + 0xC + 0x20 + read-write + 0x00000000 + + + FP0 + Falling polarity event configuration bit of line 0 + 0 + 1 + + + FP1 + Falling polarity event configuration bit of line 1 + 1 + 1 + + + FP2 + Falling polarity event configuration bit of line 2 + 2 + 1 + + + FP3 + Falling polarity event configuration bit of line 3 + 3 + 1 + + + FP4 + Falling polarity event configuration bit of line 4 + 4 + 1 + + + FP5 + Falling polarity event configuration bit of line 5 + 5 + 1 + + + FP6 + Falling polarity event configuration bit of line 6 + 6 + 1 + + + FP7 + Falling polarity event configuration bit of line 7 + 7 + 1 + + + FP8 + Falling polarity event configuration bit of line 8 + 8 + 1 + + + FP9 + Falling polarity event configuration bit of line 9 + 9 + 1 + + + FP10 + Falling polarity event configuration bit of line 10 + 10 + 1 + + + FP11 + Falling polarity event configuration bit of line 11 + 11 + 1 + + + FP12 + Falling polarity event configuration bit of line 12 + 12 + 1 + + + FP13 + Falling polarity event configuration bit of line 13 + 13 + 1 + + + FP14 + Falling polarity event configuration bit of line 14 + 14 + 1 + + + FP15 + Falling polarity event configuration bit of line 15 + 15 + 1 + + + FP16 + Falling polarity event configuration bit of line 16 + 16 + 1 + + + FP17 + Falling polarity event configuration bit of line 17 + 17 + 1 + + + FP18 + Falling polarity event configuration bit of line 18 + 18 + 1 + + + FP19 + Falling polarity event configuration bit of line 19 + 19 + 1 + + + FP20 + Falling polarity event configuration bit of line 20 + 20 + 1 + + + FP21 + Falling polarity event configuration bit of line 21 + 21 + 1 + + + FP22 + Falling polarity event configuration bit of line 22 + 22 + 1 + + + + + SWTRG + SWTRG + Software triggle register + 0x10 + 0x20 + read-write + 0x00000000 + + + SWT0 + Software triggle on line 0 + 0 + 1 + + + SWT1 + Software triggle on line 1 + 1 + 1 + + + SWT2 + Software triggle on line 2 + 2 + 1 + + + SWT3 + Software triggle on line 3 + 3 + 1 + + + SWT4 + Software triggle on line 4 + 4 + 1 + + + SWT5 + Software triggle on line 5 + 5 + 1 + + + SWT6 + Software triggle on line 6 + 6 + 1 + + + SWT7 + Software triggle on line 7 + 7 + 1 + + + SWT8 + Software triggle on line 8 + 8 + 1 + + + SWT9 + Software triggle on line 9 + 9 + 1 + + + SWT10 + Software triggle on line 10 + 10 + 1 + + + SWT11 + Software triggle on line 11 + 11 + 1 + + + SWT12 + Software triggle on line 12 + 12 + 1 + + + SWT13 + Software triggle on line 13 + 13 + 1 + + + SWT14 + Software triggle on line 14 + 14 + 1 + + + SWT15 + Software triggle on line 15 + 15 + 1 + + + SWT16 + Software triggle on line 16 + 16 + 1 + + + SWT17 + Software triggle on line 17 + 17 + 1 + + + SWT18 + Software triggle on line 18 + 18 + 1 + + + SWT19 + Software triggle on line 19 + 19 + 1 + + + SWT20 + Software triggle on line 20 + 20 + 1 + + + SWT21 + Software triggle on line 21 + 21 + 1 + + + SWT22 + Software triggle on line 22 + 22 + 1 + + + + + INTSTS + INTSTS + Interrupt status register + 0x14 + 0x20 + read-write + 0x00000000 + + + LINE0 + Line 0 state bit + 0 + 1 + + + LINE1 + Line 1 state bit + 1 + 1 + + + LINE2 + Line 2 state bit + 2 + 1 + + + LINE3 + Line 3 state bit + 3 + 1 + + + LINE4 + Line 4 state bit + 4 + 1 + + + LINE5 + Line 5 state bit + 5 + 1 + + + LINE6 + Line 6 state bit + 6 + 1 + + + LINE7 + Line 7 state bit + 7 + 1 + + + LINE8 + Line 8 state bit + 8 + 1 + + + LINE9 + Line 9 state bit + 9 + 1 + + + LINE10 + Line 10 state bit + 10 + 1 + + + LINE11 + Line 11 state bit + 11 + 1 + + + LINE12 + Line 12 state bit + 12 + 1 + + + LINE13 + Line 13 state bit + 13 + 1 + + + LINE14 + Line 14 state bit + 14 + 1 + + + LINE15 + Line 15 state bit + 15 + 1 + + + LINE16 + Line 16 state bit + 16 + 1 + + + LINE17 + Line 17 state bit + 17 + 1 + + + LINE18 + Line 18 state bit + 18 + 1 + + + LINE19 + Line 19 state bit + 19 + 1 + + + LINE20 + Line 20 state bit + 20 + 1 + + + LINE21 + Line 21 state bit + 21 + 1 + + + LINE22 + Line 22 state bit + 22 + 1 + + + + + + + EDMA + EDMA controller + EDMA + 0x40026000 + + 0x0 + 0x400 + registers + + + EDMA_Stream1 + EDMA Stream1 global interrupt + 11 + + + EDMA_Stream2 + EDMA Stream2 global interrupt + 12 + + + EDMA_Stream3 + EDMA Stream3 global interrupt + 13 + + + EDMA_Stream4 + EDMA Stream4 global interrupt + 14 + + + EDMA_Stream5 + EDMA Stream5 global interrupt + 15 + + + EDMA_Stream6 + EDMA Stream6 global interrupt + 16 + + + EDMA_Stream7 + EDMA Stream7 global interrupt + 17 + + + EDMA_Stream8 + EDMA Stream8 global interrupt + 47 + + + + STS1 + STS1 + Interrupt status register1 + 0x0 + 0x20 + read-only + 0x00000000 + + + FDTF4 + Stream 4 Full data transfer interrupt flag + + 27 + 1 + + + HDTF4 + Stream 4 half data transfer interrupt flag + + 26 + 1 + + + DTERRF4 + Stream 4 transfer error interrupt flag + + 25 + 1 + + + DMERRF4 + Stream 4 direct mode error interrupt flag + + 24 + 1 + + + FERRF4 + Stream 4 FIFO error interrupt flag + + 22 + 1 + + + FDTF3 + Stream 3 Full data transfer interrupt flag + + 21 + 1 + + + HDTF3 + Stream 3 half data transfer interrupt flag + + 20 + 1 + + + DTERRF3 + Stream 3 transfer error interrupt flag + + 19 + 1 + + + DMERRF3 + Stream 3 direct mode error interrupt flag + + 18 + 1 + + + FERRF3 + Stream 3 FIFO error interrupt flag + + 16 + 1 + + + FDTF2 + Stream 2 Full data transfer interrupt flag + + 11 + 1 + + + HDTF2 + Stream 2 half data transfer interrupt flag + + 10 + 1 + + + DTERRF2 + Stream 2 transfer error interrupt flag + + 9 + 1 + + + DMERRF2 + Stream 2 direct mode error interrupt flag + + 8 + 1 + + + FERRF2 + Stream 2 FIFO error interrupt flag + + 6 + 1 + + + FDTF1 + Stream 1 Full data transfer interrupt flag + + 5 + 1 + + + HDTF1 + Stream 1 half data transfer interrupt flag + + 4 + 1 + + + DTERRF1 + Stream 1 transfer error interrupt flag + + 3 + 1 + + + DMERRF1 + Stream 1 direct mode error interrupt flag + + 2 + 1 + + + FERRF1 + Stream 1 FIFO error interrupt flag + + 0 + 1 + + + + + STS2 + STS2 + Interrupt status register2 + 0x4 + 0x20 + read-only + 0x00000000 + + + FDTF8 + Stream 8 full data transfer interrupt flag + + 27 + 1 + + + HDTF8 + Stream 8 half data transfer interrupt flag + + 26 + 1 + + + DTERRF8 + Stream 8 transfer error interrupt flag + + 25 + 1 + + + DMERRF8 + Stream 8 direct mode error interrupt flag + + 24 + 1 + + + FERRF8 + Stream 8 FIFO error interrupt flag + + 22 + 1 + + + FDTF7 + Stream 7 full data transfer interrupt flag + + 21 + 1 + + + HDTF7 + Stream 7 half data transfer interrupt flag + + 20 + 1 + + + DTERRF7 + Stream 7 transfer error interrupt flag + + 19 + 1 + + + DMERRF7 + Stream 7 direct mode error interrupt flag + + 18 + 1 + + + FERRF7 + Stream 7 FIFO error interrupt flag + + 16 + 1 + + + FDTF6 + Stream 6 full data transfer interrupt flag + + 11 + 1 + + + HDTF6 + Stream 6 half data transfer interrupt flag + + 10 + 1 + + + DTERRF6 + Stream 6 transfer error interrupt flag + + 9 + 1 + + + DMERRF6 + Stream 6 direct mode error interrupt flag + + 8 + 1 + + + FERRF6 + Stream 6 FIFO error interrupt flag + + 6 + 1 + + + FDTF5 + Stream 5 full data transfer interrupt flag + + 5 + 1 + + + HDTF5 + Stream 5 half data transfer interrupt flag + + 4 + 1 + + + DTERRF5 + Stream 5 transfer error interrupt flag + + 3 + 1 + + + DMERRF5 + Stream 5 direct mode error interrupt flag + + 2 + 1 + + + FERRF5 + Stream 5 FIFO error interrupt flag + + 0 + 1 + + + + + CLR1 + CLR1 + Interrupt flag clear register1 + + 0x8 + 0x20 + read-write + 0x00000000 + + + FDTFC4 + Stream 4 clear full data transfer complete interrupt flag + + 27 + 1 + + + HDTFC4 + Stream 4 clear half data transfer interrupt flag + + 26 + 1 + + + DTERRFC4 + Stream 4 clear transfer error interrupt flag + + 25 + 1 + + + DMERRFC4 + Stream 4 clear direct mode error interrupt flag + + 24 + 1 + + + FERRFC4 + Stream 4 clear FIFO error interrupt flag + + 22 + 1 + + + FDTFC3 + Stream 3 clear full data transfer complete interrupt flag + + 21 + 1 + + + HDTFC3 + Stream 3 clear half data transfer interrupt flag + + 20 + 1 + + + DTERRFC3 + Stream 3 clear transfer error interrupt flag + + 19 + 1 + + + DMERRFC3 + Stream 3 clear direct mode error interrupt flag + + 18 + 1 + + + FERRFC3 + Stream 3 clear FIFO error interrupt flag + + 16 + 1 + + + FDTFC2 + Stream 2 clear full data transfer complete interrupt flag + + 11 + 1 + + + HDTFC2 + Stream 2 clear half data transfer interrupt flag + + 10 + 1 + + + DTERRFC2 + Stream 2 clear transfer error interrupt flag + + 9 + 1 + + + DMERRFC2 + Stream 2 clear direct mode error interrupt flag + + 8 + 1 + + + FERRFC2 + Stream 2 clear FIFO error interrupt flag + + 6 + 1 + + + FDTFC1 + Stream 1 clear full data transfer complete interrupt flag + + 5 + 1 + + + HDTFC1 + Stream 1 clear half data transfer interrupt flag + + 4 + 1 + + + DTERRFC1 + Stream 1 clear transfer error interrupt flag + + 3 + 1 + + + DMERRFC1 + Stream 1 clear direct mode error interrupt flag + + 2 + 1 + + + FERRFC1 + Stream 1 clear FIFO error interrupt flag + + 0 + 1 + + + + + CLR2 + CLR2 + Interrupt flag clear register2 + + 0xC + 0x20 + read-write + 0x00000000 + + + FDTFC8 + Stream 8 clear full data transfer complete interrupt flag + + 27 + 1 + + + HDTFC8 + Stream 8 clear half data transfer interrupt flag + + 26 + 1 + + + DTERRFC8 + Stream 8 clear transfer error interrupt flag + + 25 + 1 + + + DMERRFC8 + Stream 8 clear direct mode error interrupt flag + + 24 + 1 + + + FERRFC8 + Stream 8 clear FIFO error interrupt flag + + 22 + 1 + + + FDTFC7 + Stream 7 clear full data transfer complete interrupt flag + + 21 + 1 + + + HDTFC7 + Stream 7 clear half data transfer interrupt flag + + 20 + 1 + + + DTERRFC7 + Stream 7 clear transfer error interrupt flag + + 19 + 1 + + + DMERRFC7 + Stream 7 clear direct mode error interrupt flag + + 18 + 1 + + + FERRFC7 + Stream 7 clear FIFO error interrupt flag + + 16 + 1 + + + FDTFC6 + Stream 6 clear full data transfer complete interrupt flag + + 11 + 1 + + + HDTFC6 + Stream 6 clear half data transfer interrupt flag + + 10 + 1 + + + DTERRFC6 + Stream 6 clear transfer error interrupt flag + + 9 + 1 + + + DMERRFC6 + Stream 6 clear direct mode error interrupt flag + + 8 + 1 + + + FERRFC6 + Stream 6 clear FIFO error interrupt flag + + 6 + 1 + + + FDTFC5 + Stream 5 clear full data transfer complete interrupt flag + + 5 + 1 + + + HDTFC5 + Stream 5 clear half data transfer interrupt flag + + 4 + 1 + + + DTERRFC5 + Stream 5 clear transfer error interrupt flag + + 3 + 1 + + + DMERRFC5 + Stream 5 clear direct mode error interrupt flag + + 2 + 1 + + + FERRFC5 + Stream 5 clear FIFO error interrupt flag + + 0 + 1 + + + + + S1CTRL + S1CTRL + stream 1 control + register + 0x10 + 0x20 + read-write + 0x00000000 + + + MBURST + Memory burst transmission + + 23 + 2 + + + PBURST + Peripheral burst transmission + + 21 + 2 + + + CM + Current memory (only in double buffer + mode) + 19 + 1 + + + DMM + Double memory mode + 18 + 1 + + + SPL + Stream priority level + 16 + 2 + + + PINCOS + Peripheral increment offset + size + 15 + 1 + + + MWIDTH + Memory data width + 13 + 2 + + + PWIDTH + Peripheral data width + 11 + 2 + + + MINCM + Memory increment mode + 10 + 1 + + + PINCM + Peripheral increment mode + 9 + 1 + + + LM + Loop mode + 8 + 1 + + + DTD + Data transfer direction + 6 + 2 + + + PFCTRL + Peripheral flow controller + 5 + 1 + + + FDTIEN + Full data transfer complete interrupt + enable + 4 + 1 + + + HDTIEN + Half data transfer interrupt + enable + 3 + 1 + + + DTERRIEN + Transfer error interrupt + enable + 2 + 1 + + + DMERRIEN + Direct mode error interrupt + enable + 1 + 1 + + + SEN + Stream enable / flag stream ready when + read low + 0 + 1 + + + + + S1DTCNT + S1DTCNT + stream 1 number of data + register + 0x14 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data items to + transfer + 0 + 16 + + + + + S1PADDR + S1PADDR + stream 1 peripheral address + register + 0x18 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + S1M0ADDR + S1M0ADDR + stream 1 memory 0 address + register + 0x1C + 0x20 + read-write + 0x00000000 + + + M0ADDR + Memory 0 address + 0 + 32 + + + + + S1M1ADDR + S1M1ADDR + stream 1 memory 1 address + register + 0x20 + 0x20 + read-write + 0x00000000 + + + M1ADDR + Memory 1 address (used in case of Double + buffer mode) + 0 + 32 + + + + + S1FCTRL + S1FCTRL + stream 1 FIFO control register + 0x24 + 0x20 + 0x00000021 + + + FERRIEN + FIFO error interrupt + enable + 7 + 1 + read-write + + + FSTS + FIFO status + 3 + 3 + read-only + + + FEN + FIFO mode enable + 2 + 1 + read-write + + + FTHSEL + FIFO threshold selection + 0 + 2 + read-write + + + + + S2CTRL + S2CTRL + stream 2 control + register + 0x28 + 0x20 + read-write + 0x00000000 + + + MBURST + Memory burst transmission + + 23 + 2 + + + PBURST + Peripheral burst transmission + + 21 + 2 + + + CM + Current memory (only in double buffer + mode) + 19 + 1 + + + DMM + Double memory mode + 18 + 1 + + + SPL + Stream priority level + 16 + 2 + + + PINCOS + Peripheral increment offset + size + 15 + 1 + + + MWIDTH + Memory data width + 13 + 2 + + + PWIDTH + Peripheral data width + 11 + 2 + + + MINCM + Memory increment mode + 10 + 1 + + + PINCM + Peripheral increment mode + 9 + 1 + + + LM + Loop mode + 8 + 1 + + + DTD + Data transfer direction + 6 + 2 + + + PFCTRL + Peripheral flow controller + 5 + 1 + + + FDTIEN + Full data transfer complete interrupt + enable + 4 + 1 + + + HDTIEN + Half data transfer interrupt + enable + 3 + 1 + + + DTERRIEN + Transfer error interrupt + enable + 2 + 1 + + + DMERRIEN + Direct mode error interrupt + enable + 1 + 1 + + + SEN + Stream enable / flag stream ready when + read low + 0 + 1 + + + + + S2DTCNT + S2DTCNT + stream 2 number of data + register + 0x2C + 0x20 + read-write + 0x00000000 + + + CNT + Number of data items to + transfer + 0 + 16 + + + + + S2PADDR + S2PADDR + stream 2 peripheral address + register + 0x30 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + S2M0ADDR + S2M0ADDR + stream 2 memory 0 address + register + 0x34 + 0x20 + read-write + 0x00000000 + + + M0ADDR + Memory 0 address + 0 + 32 + + + + + S2M1ADDR + S2M1ADDR + stream 2 memory 1 address + register + 0x38 + 0x20 + read-write + 0x00000000 + + + M1ADDR + Memory 1 address (used in case of Double + buffer mode) + 0 + 32 + + + + + S2FCTRL + S2FCTRL + stream 2 FIFO control register + 0x3C + 0x20 + 0x00000021 + + + FERRIEN + FIFO error interrupt + enable + 7 + 1 + read-write + + + FSTS + FIFO status + 3 + 3 + read-only + + + FEN + FIFO mode enable + 2 + 1 + read-write + + + FTHSEL + FIFO threshold selection + 0 + 2 + read-write + + + + + S3CTRL + S3CTRL + stream 3 control + register + 0x40 + 0x20 + read-write + 0x00000000 + + + MBURST + Memory burst transmission + + 23 + 2 + + + PBURST + Peripheral burst transmission + + 21 + 2 + + + CM + Current memory (only in double buffer + mode) + 19 + 1 + + + DMM + Double memory mode + 18 + 1 + + + SPL + Stream priority level + 16 + 2 + + + PINCOS + Peripheral increment offset + size + 15 + 1 + + + MWIDTH + Memory data width + 13 + 2 + + + PWIDTH + Peripheral data width + 11 + 2 + + + MINCM + Memory increment mode + 10 + 1 + + + PINCM + Peripheral increment mode + 9 + 1 + + + LM + Loop mode + 8 + 1 + + + DTD + Data transfer direction + 6 + 2 + + + PFCTRL + Peripheral flow controller + 5 + 1 + + + FDTIEN + Full data transfer complete interrupt + enable + 4 + 1 + + + HDTIEN + Half data transfer interrupt + enable + 3 + 1 + + + DTERRIEN + Transfer error interrupt + enable + 2 + 1 + + + DMERRIEN + Direct mode error interrupt + enable + 1 + 1 + + + SEN + Stream enable / flag stream ready when + read low + 0 + 1 + + + + + S3DTCNT + S3DTCNT + stream 3 number of data + register + 0x44 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data items to + transfer + 0 + 16 + + + + + S3PADDR + S3PADDR + stream 3 peripheral address + register + 0x48 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + S3M0ADDR + S3M0ADDR + stream 3 memory 0 address + register + 0x4C + 0x20 + read-write + 0x00000000 + + + M0ADDR + Memory 0 address + 0 + 32 + + + + + S3M1ADDR + S3M1ADDR + stream 3 memory 1 address + register + 0x50 + 0x20 + read-write + 0x00000000 + + + M1ADDR + Memory 1 address (used in case of Double + buffer mode) + 0 + 32 + + + + + S3FCTRL + S3FCTRL + stream 3 FIFO control register + 0x54 + 0x20 + 0x00000021 + + + FERRIEN + FIFO error interrupt + enable + 7 + 1 + read-write + + + FSTS + FIFO status + 3 + 3 + read-only + + + FEN + FIFO mode enable + 2 + 1 + read-write + + + FTHSEL + FIFO threshold selection + 0 + 2 + read-write + + + + + S4CTRL + S4CTRL + stream 4 control + register + 0x58 + 0x20 + read-write + 0x00000000 + + + MBURST + Memory burst transmission + + 23 + 2 + + + PBURST + Peripheral burst transmission + + 21 + 2 + + + CM + Current memory (only in double buffer + mode) + 19 + 1 + + + DMM + Double memory mode + 18 + 1 + + + SPL + Stream priority level + 16 + 2 + + + PINCOS + Peripheral increment offset + size + 15 + 1 + + + MWIDTH + Memory data width + 13 + 2 + + + PWIDTH + Peripheral data width + 11 + 2 + + + MINCM + Memory increment mode + 10 + 1 + + + PINCM + Peripheral increment mode + 9 + 1 + + + LM + Loop mode + 8 + 1 + + + DTD + Data transfer direction + 6 + 2 + + + PFCTRL + Peripheral flow controller + 5 + 1 + + + FDTIEN + Full data transfer complete interrupt + enable + 4 + 1 + + + HDTIEN + Half data transfer interrupt + enable + 3 + 1 + + + DTERRIEN + Transfer error interrupt + enable + 2 + 1 + + + DMERRIEN + Direct mode error interrupt + enable + 1 + 1 + + + SEN + Stream enable / flag stream ready when + read low + 0 + 1 + + + + + S4DTCNT + S4DTCNT + stream 4 number of data + register + 0x5C + 0x20 + read-write + 0x00000000 + + + CNT + Number of data items to + transfer + 0 + 16 + + + + + S4PADDR + S4PADDR + stream 4 peripheral address + register + 0x60 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + S4M0ADDR + S4M0ADDR + stream 4 memory 0 address + register + 0x64 + 0x20 + read-write + 0x00000000 + + + M0ADDR + Memory 0 address + 0 + 32 + + + + + S4M1ADDR + S4M1ADDR + stream 4 memory 1 address + register + 0x68 + 0x20 + read-write + 0x00000000 + + + M1ADDR + Memory 1 address (used in case of Double + buffer mode) + 0 + 32 + + + + + S4FCTRL + S4FCTRL + stream 4 FIFO control register + 0x6C + 0x20 + 0x00000021 + + + FERRIEN + FIFO error interrupt + enable + 7 + 1 + read-write + + + FSTS + FIFO status + 3 + 3 + read-only + + + FEN + FIFO mode enable + 2 + 1 + read-write + + + FTHSEL + FIFO threshold selection + 0 + 2 + read-write + + + + + S5CTRL + S5CTRL + stream 5 control + register + 0x70 + 0x20 + read-write + 0x00000000 + + + MBURST + Memory burst transmission + + 23 + 2 + + + PBURST + Peripheral burst transmission + + 21 + 2 + + + CM + Current memory (only in double buffer + mode) + 19 + 1 + + + DMM + Double memory mode + 18 + 1 + + + SPL + Stream priority level + 16 + 2 + + + PINCOS + Peripheral increment offset + size + 15 + 1 + + + MWIDTH + Memory data width + 13 + 2 + + + PWIDTH + Peripheral data width + 11 + 2 + + + MINCM + Memory increment mode + 10 + 1 + + + PINCM + Peripheral increment mode + 9 + 1 + + + LM + Loop mode + 8 + 1 + + + DTD + Data transfer direction + 6 + 2 + + + PFCTRL + Peripheral flow controller + 5 + 1 + + + FDTIEN + Full data transfer complete interrupt + enable + 4 + 1 + + + HDTIEN + Half data transfer interrupt + enable + 3 + 1 + + + DTERRIEN + Transfer error interrupt + enable + 2 + 1 + + + DMERRIEN + Direct mode error interrupt + enable + 1 + 1 + + + SEN + Stream enable / flag stream ready when + read low + 0 + 1 + + + + + S5DTCNT + S5DTCNT + stream 5 number of data + register + 0x74 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data items to + transfer + 0 + 16 + + + + + S5PADDR + S5PADDR + stream 5 peripheral address + register + 0x78 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + S5M0ADDR + S5M0ADDR + stream 5 memory 0 address + register + 0x7C + 0x20 + read-write + 0x00000000 + + + M0ADDR + Memory 0 address + 0 + 32 + + + + + S5M1ADDR + S5M1ADDR + stream 5 memory 1 address + register + 0x80 + 0x20 + read-write + 0x00000000 + + + M1ADDR + Memory 1 address (used in case of Double + buffer mode) + 0 + 32 + + + + + S5FCTRL + S5FCTRL + stream 5 FIFO control register + 0x84 + 0x20 + 0x00000021 + + + FERRIEN + FIFO error interrupt + enable + 7 + 1 + read-write + + + FSTS + FIFO status + 3 + 3 + read-only + + + FEN + FIFO mode enable + 2 + 1 + read-write + + + FTHSEL + FIFO threshold selection + 0 + 2 + read-write + + + + + S6CTRL + S6CTRL + stream 6 control + register + 0x88 + 0x20 + read-write + 0x00000000 + + + MBURST + Memory burst transmission + + 23 + 2 + + + PBURST + Peripheral burst transmission + + 21 + 2 + + + CM + Current memory (only in double buffer + mode) + 19 + 1 + + + DMM + Double memory mode + 18 + 1 + + + SPL + Stream priority level + 16 + 2 + + + PINCOS + Peripheral increment offset + size + 15 + 1 + + + MWIDTH + Memory data width + 13 + 2 + + + PWIDTH + Peripheral data width + 11 + 2 + + + MINCM + Memory increment mode + 10 + 1 + + + PINCM + Peripheral increment mode + 9 + 1 + + + LM + Loop mode + 8 + 1 + + + DTD + Data transfer direction + 6 + 2 + + + PFCTRL + Peripheral flow controller + 5 + 1 + + + FDTIEN + Full data transfer complete interrupt + enable + 4 + 1 + + + HDTIEN + Half data transfer interrupt + enable + 3 + 1 + + + DTERRIEN + Transfer error interrupt + enable + 2 + 1 + + + DMERRIEN + Direct mode error interrupt + enable + 1 + 1 + + + SEN + Stream enable / flag stream ready when + read low + 0 + 1 + + + + + S6DTCNT + S6DTCNT + stream 6 number of data + register + 0x8C + 0x20 + read-write + 0x00000000 + + + CNT + Number of data items to + transfer + 0 + 16 + + + + + S6PADDR + S6PADDR + stream 6 peripheral address + register + 0x90 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + S6M0ADDR + S6M0ADDR + stream 6 memory 0 address + register + 0x94 + 0x20 + read-write + 0x00000000 + + + M0ADDR + Memory 0 address + 0 + 32 + + + + + S6M1ADDR + S6M1ADDR + stream 6 memory 1 address + register + 0x98 + 0x20 + read-write + 0x00000000 + + + M1ADDR + Memory 1 address (used in case of Double + buffer mode) + 0 + 32 + + + + + S6FCTRL + S6FCTRL + stream 6 FIFO control register + 0x9C + 0x20 + 0x00000021 + + + FERRIEN + FIFO error interrupt + enable + 7 + 1 + read-write + + + FSTS + FIFO status + 3 + 3 + read-only + + + FEN + FIFO mode enable + 2 + 1 + read-write + + + FTHSEL + FIFO threshold selection + 0 + 2 + read-write + + + + + S7CTRL + S7CTRL + stream 7 control + register + 0xA0 + 0x20 + read-write + 0x00000000 + + + MBURST + Memory burst transmission + + 23 + 2 + + + PBURST + Peripheral burst transmission + + 21 + 2 + + + CM + Current memory (only in double buffer + mode) + 19 + 1 + + + DMM + Double memory mode + 18 + 1 + + + SPL + Stream priority level + 16 + 2 + + + PINCOS + Peripheral increment offset + size + 15 + 1 + + + MWIDTH + Memory data width + 13 + 2 + + + PWIDTH + Peripheral data width + 11 + 2 + + + MINCM + Memory increment mode + 10 + 1 + + + PINCM + Peripheral increment mode + 9 + 1 + + + LM + Loop mode + 8 + 1 + + + DTD + Data transfer direction + 6 + 2 + + + PFCTRL + Peripheral flow controller + 5 + 1 + + + FDTIEN + Full data transfer complete interrupt + enable + 4 + 1 + + + HDTIEN + Half data transfer interrupt + enable + 3 + 1 + + + DTERRIEN + Transfer error interrupt + enable + 2 + 1 + + + DMERRIEN + Direct mode error interrupt + enable + 1 + 1 + + + SEN + Stream enable / flag stream ready when + read low + 0 + 1 + + + + + S7DTCNT + S7DTCNT + stream 7 number of data + register + 0xA4 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data items to + transfer + 0 + 16 + + + + + S7PADDR + S7PADDR + stream 7 peripheral address + register + 0xA8 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + S7M0ADDR + S7M0ADDR + stream 7 memory 0 address + register + 0xAC + 0x20 + read-write + 0x00000000 + + + M0ADDR + Memory 0 address + 0 + 32 + + + + + S7M1ADDR + S7M1ADDR + stream 7 memory 1 address + register + 0xB0 + 0x20 + read-write + 0x00000000 + + + M1ADDR + Memory 1 address (used in case of Double + buffer mode) + 0 + 32 + + + + + S7FCTRL + S7FCTRL + stream 7 FIFO control register + 0xB4 + 0x20 + 0x00000021 + + + FERRIEN + FIFO error interrupt + enable + 7 + 1 + read-write + + + FSTS + FIFO status + 3 + 3 + read-only + + + FEN + FIFO mode enable + 2 + 1 + read-write + + + FTHSEL + FIFO threshold selection + 0 + 2 + read-write + + + + + S8CTRL + S8CTRL + stream 8 control + register + 0xB8 + 0x20 + read-write + 0x00000000 + + + MBURST + Memory burst transmission + + 23 + 2 + + + PBURST + Peripheral burst transmission + + 21 + 2 + + + CM + Current memory (only in double buffer + mode) + 19 + 1 + + + DMM + Double memory mode + 18 + 1 + + + SPL + Stream priority level + 16 + 2 + + + PINCOS + Peripheral increment offset + size + 15 + 1 + + + MWIDTH + Memory data width + 13 + 2 + + + PWIDTH + Peripheral data width + 11 + 2 + + + MINCM + Memory increment mode + 10 + 1 + + + PINCM + Peripheral increment mode + 9 + 1 + + + LM + Loop mode + 8 + 1 + + + DTD + Data transfer direction + 6 + 2 + + + PFCTRL + Peripheral flow controller + 5 + 1 + + + FDTIEN + Full data transfer complete interrupt + enable + 4 + 1 + + + HDTIEN + Half data transfer interrupt + enable + 3 + 1 + + + DTERRIEN + Transfer error interrupt + enable + 2 + 1 + + + DMERRIEN + Direct mode error interrupt + enable + 1 + 1 + + + SEN + Stream enable / flag stream ready when + read low + 0 + 1 + + + + + S8DTCNT + S8DTCNT + stream 8 number of data + register + 0xBC + 0x20 + read-write + 0x00000000 + + + CNT + Number of data items to + transfer + 0 + 16 + + + + + S8PADDR + S8PADDR + stream 8 peripheral address + register + 0xC0 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + S8M0ADDR + S8M0ADDR + stream 8 memory 0 address + register + 0xC4 + 0x20 + read-write + 0x00000000 + + + M0ADDR + Memory 0 address + 0 + 32 + + + + + S8M1ADDR + S8M1ADDR + stream 8 memory 1 address + register + 0xC8 + 0x20 + read-write + 0x00000000 + + + M1ADDR + Memory 1 address (used in case of Double + buffer mode) + 0 + 32 + + + + + S8FCTRL + S8FCTRL + stream 8 FIFO control register + 0xCC + 0x20 + 0x00000021 + + + FERRIEN + FIFO error interrupt + enable + 7 + 1 + read-write + + + FSTS + FIFO status + 3 + 3 + read-only + + + FEN + FIFO mode enable + 2 + 1 + read-write + + + FTHSEL + FIFO threshold selection + 0 + 2 + read-write + + + + + LLCTRL + LLCTRL + DMA Link List Control Register + 0xD0 + 0x20 + 0x00000000 + + + S1LLEN + Stream 1 link list enable + 0 + 1 + read-write + + + S2LLEN + Stream 2 link list enable + 1 + 1 + read-write + + + S3LLEN + Stream 3 link list enable + 2 + 1 + read-write + + + S4LLEN + Stream 4 link list enable + 3 + 1 + read-write + + + S5LLEN + Stream 5 link list enable + 4 + 1 + read-write + + + S6LLEN + Stream 6 link list enable + 5 + 1 + read-write + + + S7LLEN + Stream 7 link list enable + 6 + 1 + read-write + + + S8LLEN + Stream 8 link list enable + 7 + 1 + read-write + + + + + S1LLP + S1LLP + Stream 1 Link List Pointer + 0xD4 + 0x20 + 0x00000000 + + + LLP + Link list pointer + 0 + 32 + read-write + + + + + S2LLP + S2LLP + Stream 2 Link List Pointer + 0xD8 + 0x20 + 0x00000000 + + + LLP + Link list pointer + 0 + 32 + read-write + + + + + S3LLP + S3LLP + Stream 3 Link List Pointer + 0xDC + 0x20 + 0x00000000 + + + LLP + Link list pointer + 0 + 32 + read-write + + + + + S4LLP + S4LLP + Stream 4 Link List Pointer + 0xE0 + 0x20 + 0x00000000 + + + LLP + Link list pointer + 0 + 32 + read-write + + + + + S5LLP + S5LLP + Stream 5 Link List Pointer + 0xE4 + 0x20 + 0x00000000 + + + LLP + Link list pointer + 0 + 32 + read-write + + + + + S6LLP + S6LLP + Stream 6 Link List Pointer + 0xE8 + 0x20 + 0x00000000 + + + LLP + Link list pointer + 0 + 32 + read-write + + + + + S7LLP + S7LLP + Stream 7 Link List Pointer + 0xEC + 0x20 + 0x00000000 + + + LLP + Link list pointer + 0 + 32 + read-write + + + + + S8LLP + S8LLP + Stream 8 Link List Pointer + 0xF0 + 0x20 + 0x00000000 + + + LLP + Link list pointer + 0 + 32 + read-write + + + + + S2DCTRL + S2DCTRL + EDMA 2D Transfer Control Register + 0xF4 + 0x20 + 0x00000000 + + + S1_2DEN + Stream 1 2D transfer enable + 0 + 1 + read-write + + + S2_2DEN + Stream 2 2D transfer enable + 1 + 1 + read-write + + + S3_2DEN + Stream 3 2D transfer enable + 2 + 1 + read-write + + + S4_2DEN + Stream 4 2D transfer enable + 3 + 1 + read-write + + + S5_2DEN + Stream 5 2D transfer enable + 4 + 1 + read-write + + + S6_2DEN + Stream 6 2D transfer enable + 5 + 1 + read-write + + + S7_2DEN + Stream 7 2D transfer enable + 6 + 1 + read-write + + + S8_2DEN + Stream 8 2D transfer enable + 7 + 1 + read-write + + + + + S1_2DCNT + S1_2DCNT + Stream 1 2D Transfer Count + 0xF8 + 0x20 + 0x00000000 + + + XCONUT + X dimension transfer count + 0 + 16 + read-write + + + YCONUT + Y dimension transfer count + 16 + 16 + read-write + + + + + S1_STRIDE + S1_STRIDE + Stream 1 2D Transfer Stride + 0xFC + 0x20 + 0x00000000 + + + SRCSTD + Source stride + 0 + 16 + read-write + + + DSTSTD + Destination stride + 16 + 16 + read-write + + + + + S2_2DCNT + S2_2DCNT + Stream 2 2D Transfer Count + 0x100 + 0x20 + 0x00000000 + + + XCONUT + X dimension transfer count + 0 + 16 + read-write + + + YCONUT + Y dimension transfer count + 16 + 16 + read-write + + + + + S2_STRIDE + S2_STRIDE + Stream 2 2D Transfer Stride + 0x104 + 0x20 + 0x00000000 + + + SRCSTD + Source stride + 0 + 16 + read-write + + + DSTSTD + Destination stride + 16 + 16 + read-write + + + + + S3_2DCNT + S3_2DCNT + Stream 3 2D Transfer Count + 0x108 + 0x20 + 0x00000000 + + + XCONUT + X dimension transfer count + 0 + 16 + read-write + + + YCONUT + Y dimension transfer count + 16 + 16 + read-write + + + + + S3_STRIDE + S3_STRIDE + Stream 3 2D Transfer Stride + 0x10C + 0x20 + 0x00000000 + + + SRCSTD + Source stride + 0 + 16 + read-write + + + DSTSTD + Destination stride + 16 + 16 + read-write + + + + + S4_2DCNT + S4_2DCNT + Stream 4 2D Transfer Count + 0x110 + 0x20 + 0x00000000 + + + XCONUT + X dimension transfer count + 0 + 16 + read-write + + + YCONUT + Y dimension transfer count + 16 + 16 + read-write + + + + + S4_STRIDE + S4_STRIDE + Stream 4 2D Transfer Stride + 0x114 + 0x20 + 0x00000000 + + + SRCSTD + Source stride + 0 + 16 + read-write + + + DSTSTD + Destination stride + 16 + 16 + read-write + + + + + S5_2DCNT + S5_2DCNT + Stream 5 2D Transfer Count + 0x118 + 0x20 + 0x00000000 + + + XCONUT + X dimension transfer count + 0 + 16 + read-write + + + YCONUT + Y dimension transfer count + 16 + 16 + read-write + + + + + S5_STRIDE + S5_STRIDE + Stream 5 2D Transfer Stride + 0x11C + 0x20 + 0x00000000 + + + SRCSTD + Source stride + 0 + 16 + read-write + + + DSTSTD + Destination stride + 16 + 16 + read-write + + + + + S6_2DCNT + S6_2DCNT + Stream 6 2D Transfer Count + 0x120 + 0x20 + 0x00000000 + + + XCONUT + X dimension transfer count + 0 + 16 + read-write + + + YCONUT + Y dimension transfer count + 16 + 16 + read-write + + + + + S6_STRIDE + S6_STRIDE + Stream 6 2D Transfer Stride + 0x124 + 0x20 + 0x00000000 + + + SRCSTD + Source stride + 0 + 16 + read-write + + + DSTSTD + Destination stride + 16 + 16 + read-write + + + + + S7_2DCNT + S7_2DCNT + Stream 7 2D Transfer Count + 0x128 + 0x20 + 0x00000000 + + + XCONUT + X dimension transfer count + 0 + 16 + read-write + + + YCONUT + Y dimension transfer count + 16 + 16 + read-write + + + + + S7_STRIDE + S7_STRIDE + Stream 7 2D Transfer Stride + 0x12C + 0x20 + 0x00000000 + + + SRCSTD + Source stride + 0 + 16 + read-write + + + DSTSTD + Destination stride + 16 + 16 + read-write + + + + + S8_2DCNT + S8_2DCNT + Stream 8 2D Transfer Count + 0x130 + 0x20 + 0x00000000 + + + XCONUT + X dimension transfer count + 0 + 16 + read-write + + + YCONUT + Y dimension transfer count + 16 + 16 + read-write + + + + + S8_STRIDE + S8_STRIDE + Stream 8 2D Transfer Stride + 0x134 + 0x20 + 0x00000000 + + + SRCSTD + Source stride + 0 + 16 + read-write + + + DSTSTD + Destination stride + 16 + 16 + read-write + + + + + SYNCEN + SYNCEN + Sync Enable + 0x138 + 0x20 + 0x00000000 + + + S1SYNC + Stream 1 sync enable + 0 + 1 + read-write + + + S2SYNC + Stream 2 sync enable + 1 + 1 + read-write + + + S3SYNC + Stream 3 sync enable + 2 + 1 + read-write + + + S4SYNC + Stream 4 sync enable + 3 + 1 + read-write + + + S5SYNC + Stream 5 sync enable + 4 + 1 + read-write + + + S6SYNC + Stream 6 sync enable + 5 + 1 + read-write + + + S7SYNC + Stream 7 sync enable + 6 + 1 + read-write + + + S8SYNC + Stream 8 sync enable + 7 + 1 + read-write + + + + + MUXSEL + MUXSEL + EDMA MUX Table Selection + 0x13C + 0x20 + 0x00000000 + + + TBL_SEL + Multiplexer Table Select + 0 + 1 + read-write + + + + + MUXS1CTRL + MUXS1CTRL + Stream 1 Configuration Register + 0x140 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization select + 24 + 5 + read-write + + + + + MUXS2CTRL + MUXS2CTRL + Stream 2 Configuration Register + 0x144 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization select + 24 + 5 + read-write + + + + + MUXS3CTRL + MUXS3CTRL + Stream 3 Configuration Register + 0x148 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization select + 24 + 5 + read-write + + + + + MUXS4CTRL + MUXS4CTRL + Stream 4 Configuration Register + 0x14C + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization select + 24 + 5 + read-write + + + + + MUXS5CTRL + MUXS5CTRL + Stream x Configuration Register + 0x150 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization select + 24 + 5 + read-write + + + + + MUXS6CTRL + MUXS6CTRL + Stream 6 Configuration Register + 0x154 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization select + 24 + 5 + read-write + + + + + MUXS7CTRL + MUXS7CTRL + Stream 7 Configuration Register + 0x158 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization select + 24 + 5 + read-write + + + + + MUXS8CTRL + MUXS8CTRL + Stream 8 Configuration Register + 0x15C + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization select + 24 + 5 + read-write + + + + + MUXG1CTRL + MUXG1CTRL + Generator 1 Configuration Register + 0x160 + 0x20 + 0x00000000 + + + SIGSEL + Signal select + 0 + 5 + read-write + + + TRGOVIEN + Trigger overrun interrupt enable + 8 + 1 + read-write + + + GEN + DMA request generator enable + 16 + 1 + read-write + + + GPOL + DMA request generator trigger polarity + 17 + 2 + read-write + + + GREQCNT + Number of DMA requests to be generated + 19 + 5 + read-write + + + + + MUXG2CTRL + MUXG2CTRL + Generator 2 Configuration Register + 0x164 + 0x20 + 0x00000000 + + + SIGSEL + Signal select + 0 + 5 + read-write + + + TRGOVIEN + Trigger overrun interrupt enable + 8 + 1 + read-write + + + GEN + DMA request generator enable + 16 + 1 + read-write + + + GPOL + DMA request generator trigger polarity + 17 + 2 + read-write + + + GREQCNT + Number of DMA requests to be generated + 19 + 5 + read-write + + + + + MUXG3CTRL + MUXG3CTRL + Generator 3 Configuration Register + 0x168 + 0x20 + 0x00000000 + + + SIGSEL + Signal select + 0 + 5 + read-write + + + TRGOVIEN + Trigger overrun interrupt enable + 8 + 1 + read-write + + + GEN + DMA request generator enable + 16 + 1 + read-write + + + GPOL + DMA request generator trigger polarity + 17 + 2 + read-write + + + GREQCNT + Number of DMA requests to be generated + 19 + 5 + read-write + + + + + MUXG4CTRL + MUXG4CTRL + Generator 4 Configuration Register + 0x16C + 0x20 + 0x00000000 + + + SIGSEL + Signal select + 0 + 5 + read-write + + + TRGOVIEN + Trigger overrun interrupt enable + 8 + 1 + read-write + + + GEN + DMA request generator enable + 16 + 1 + read-write + + + GPOL + DMA request generator trigger polarity + 17 + 2 + read-write + + + GREQCNT + Number of DMA requests to be generated + 19 + 5 + read-write + + + + + MUXSYNCSTS + MUXSYNCSTS + Channel Interrupt Status Register + 0x170 + 0x20 + 0x00000000 + + + SYNCOVF1 + Synchronizaton overrun interrupt flag + 0 + 1 + read-only + + + SYNCOVF2 + Synchronizaton overrun interrupt flag + 1 + 1 + read-only + + + SYNCOVF3 + Synchronizaton overrun interrupt flag + 2 + 1 + read-only + + + SYNCOVF4 + Synchronizaton overrun interrupt flag + 3 + 1 + read-only + + + SYNCOVF5 + Synchronizaton overrun interrupt flag + 4 + 1 + read-only + + + SYNCOVF6 + Synchronizaton overrun interrupt flag + 5 + 1 + read-only + + + SYNCOVF7 + Synchronizaton overrun interrupt flag + 6 + 1 + read-only + + + SYNCOVF8 + Synchronizaton overrun interrupt flag + 7 + 1 + read-only + + + + + MUXSYNCCLR + MUXSYNCCLR + Channel Interrupt Clear Flag Register + 0x174 + 0x20 + 0x00000000 + + + SYNCOVFC1 + Clear synchronizaton overrun interrupt flag + 0 + 1 + read-write + + + SYNCOVFC2 + Clear synchronizaton overrun interrupt flag + 1 + 1 + read-write + + + SYNCOVFC3 + Clear synchronizaton overrun interrupt flag + 2 + 1 + read-write + + + SYNCOVFC4 + Clear synchronizaton overrun interrupt flag + 3 + 1 + read-write + + + SYNCOVFC5 + Clear synchronizaton overrun interrupt flag + 4 + 1 + read-write + + + SYNCOVFC6 + Clear synchronizaton overrun interrupt flag + 5 + 1 + read-write + + + SYNCOVFC7 + Clear synchronizaton overrun interrupt flag + 6 + 1 + read-write + + + SYNCOVFC8 + Clear synchronizaton overrun interrupt flag + 7 + 1 + read-write + + + + + MUXGSTS + MUXGSTS + Generator Interrupt Status Register + 0x178 + 0x20 + 0x00000000 + + + TRGOVF1 + Trigger overrun interrupt flag + 0 + 1 + read-write + + + TRGOVF2 + Trigger overrun interrupt flag + 1 + 1 + read-write + + + TRGOVF3 + Trigger overrun interrupt flag + 2 + 1 + read-write + + + TRGOVF4 + Trigger overrun interrupt flag + 3 + 1 + read-write + + + + + MUXGCLR + MUXGCLR + Generator Interrupt Clear Flag Register + 0x17C + 0x20 + 0x00000000 + + + TRGOVFC1 + Clear trigger overrun interrupt flag + 0 + 1 + read-write + + + + TRGOVFC2 + Clear trigger overrun interrupt flag + 1 + 1 + read-write + + + TRGOVFC3 + Clear trigger overrun interrupt flag + 2 + 1 + read-write + + + TRGOVFC4 + Clear trigger overrun interrupt flag + 3 + 1 + read-write + + + + + + + DMA1 + DMA controller + DMA + 0x40026400 + + 0x0 + 0x200 + registers + + + DMA1_Channel1 + DMA1 Channel1 global interrupt + 56 + + + DMA1_Channel2 + DMA1 Channel2 global interrupt + 57 + + + DMA1_Channel3 + DMA1 Channel3 global interrupt + 58 + + + DMA1_Channel4 + DMA1 Channel4 global interrupt + 59 + + + DMA1_Channel5 + DMA1 Channel5 global interrupt + 60 + + + DMA1_Channel6 + DMA1 Channel6 global interrupt + 68 + + + DMA1_Channel7 + DMA1 Channel7 global interrupt + 69 + + + + STS + STS + DMA interrupt status register + (DMA_STS) + 0x0 + 0x20 + read-only + 0x00000000 + + + GF1 + Channel 1 Global event flag + 0 + 1 + + + FDTF1 + Channel 1 full data transfer event flag + 1 + 1 + + + HDTF1 + Channel 1 half data transfer event flag + 2 + 1 + + + DTERRF1 + Channel 1 data transfer error event flag + 3 + 1 + + + GF2 + Channel 2 Global event flag + 4 + 1 + + + FDTF2 + Channel 2 full data transfer event flag + 5 + 1 + + + HDTF2 + Channel 2 half data transfer event flag + 6 + 1 + + + DTERRF2 + Channel 2 data transfer error event flag + 7 + 1 + + + GF3 + Channel 3 Global event flag + 8 + 1 + + + FDTF3 + Channel 3 full data transfer event flag + 9 + 1 + + + HDTF3 + Channel 3 half data transfer event flag + 10 + 1 + + + DTERRF3 + Channel 3 data transfer error event flag + 11 + 1 + + + GF4 + Channel 4 Global event flag + 12 + 1 + + + FDTF4 + Channel 4 full data transfer event flag + 13 + 1 + + + HDTF4 + Channel 4 half data transfer event flag + 14 + 1 + + + DTERRF4 + Channel 4 data transfer error event flag + 15 + 1 + + + GF5 + Channel 5 Global event flag + 16 + 1 + + + FDTF5 + Channel 5 full data transfer event flag + 17 + 1 + + + HDTF5 + Channel 5 half data transfer event flag + 18 + 1 + + + DTERRF5 + Channel 5 data transfer error event flag + 19 + 1 + + + GF6 + Channel 6 Global event flag + 20 + 1 + + + FDTF6 + Channel 6 full data transfer event flag + 21 + 1 + + + HDTF6 + Channel 6 half data transfer event flag + 22 + 1 + + + DTERRF6 + Channel 6 data transfer error event flag + 23 + 1 + + + GF7 + Channel 7 Global event flag + 24 + 1 + + + FDTF7 + Channel 7 full data transfer event flag + 25 + 1 + + + HDTF7 + Channel 7 half data transfer event flag + 26 + 1 + + + DTERRF7 + Channel 7 data transfer error event flag + 27 + 1 + + + + + CLR + CLR + DMA interrupt flag clear register + (DMA_CLR) + 0x4 + 0x20 + read-write + 0x00000000 + + + GFC1 + Channel 1 Global flag clear + 0 + 1 + + + GFC2 + Channel 2 Global flag clear + 4 + 1 + + + GFC3 + Channel 3 Global flag clear + 8 + 1 + + + GFC4 + Channel 4 Global flag clear + 12 + 1 + + + GFC5 + Channel 5 Global flag clear + 16 + 1 + + + GFC6 + Channel 6 Global flag clear + 20 + 1 + + + GFC7 + Channel 7 Global flag clear + 24 + 1 + + + FDTFC1 + Channel 1 full data transfer flag clear + 1 + 1 + + + FDTFC2 + Channel 2 full data transfer flag clear + 5 + 1 + + + FDTFC3 + Channel 3 full data transfer flag clear + 9 + 1 + + + FDTFC4 + Channel 4 full data transfer flag clear + 13 + 1 + + + FDTFC5 + Channel 5 full data transfer flag clear + 17 + 1 + + + FDTFC6 + Channel 6 full data transfer flag clear + 21 + 1 + + + FDTFC7 + Channel 7 full data transfer flag clear + 25 + 1 + + + HDTFC1 + Channel 1 half data transfer flag clear + 2 + 1 + + + HDTFC2 + Channel 2 half data transfer flag clear + 6 + 1 + + + HDTFC3 + Channel 3 half data transfer flag clear + 10 + 1 + + + HDTFC4 + Channel 4 half data transfer flag clear + 14 + 1 + + + HDTFC5 + Channel 5 half data transfer flag clear + 18 + 1 + + + HDTFC6 + Channel 6 half data transfer flag clear + 22 + 1 + + + HDTFC7 + Channel 7 half data transfer flag clear + 26 + 1 + + + DTERRFC1 + Channel 1 data transfer error flag clear + 3 + 1 + + + DTERRFC2 + Channel 2 data transfer error flag clear + 7 + 1 + + + DTERRFC3 + Channel 3 data transfer error flag clear + 11 + 1 + + + DTERRFC4 + Channel 4 data transfer error flag clear + 15 + 1 + + + DTERRFC5 + Channel 5 data transfer error flag clear + 19 + 1 + + + DTERRFC6 + Channel 6 data transfer error flag clear + 23 + 1 + + + DTERRFC7 + Channel 7 data transfer error flag clear + 27 + 1 + + + + + C1CTRL + C1CTRL + DMA channel configuration register(DMA_C1CTRL) + 0x8 + 0x20 + read-write + 0x00000000 + + + CHEN + Channel enable + 0 + 1 + + + FDTIEN + Transfer complete interrupt enable + 1 + 1 + + + HDTIEN + Half transfer interrupt enable + 2 + 1 + + + DTERRIEN + Transfer error interrupt enable + 3 + 1 + + + DTD + Data transfer direction + 4 + 1 + + + LM + Loop mode + 5 + 1 + + + PINCM + Peripheral increment mode + 6 + 1 + + + MINCM + Memory increment mode + 7 + 1 + + + PWIDTH + Peripheral data bit width + 8 + 2 + + + MWIDTH + Memory data bit width + 10 + 2 + + + CHPL + Channel Priority level + 12 + 2 + + + M2M + Memory to memory mode + 14 + 1 + + + + + C1DTCNT + C1DTCNT + DMA channel 1 number of data to transfer register + 0xC + 0x20 + read-write + 0x00000000 + + + CNT + Number of data to transfer + 0 + 16 + + + + + C1PADDR + C1PADDR + DMA channel 1 peripheral base address register + 0x10 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + C1MADDR + C1MADDR + DMA channel 1 memory base address register + 0x14 + 0x20 + read-write + 0x00000000 + + + MADDR + Memory address + 0 + 32 + + + + + C2CTRL + C2CTRL + DMA channel configuration register (DMA_C2CTRL) + 0x1C + 0x20 + read-write + 0x00000000 + + + CHEN + Channel enable + 0 + 1 + + + FDTIEN + Transfer complete interrupt enable + 1 + 1 + + + HDTIEN + Half transfer interrupt enable + 2 + 1 + + + DTERRIEN + Transfer error interrupt enable + 3 + 1 + + + DTD + Data transfer direction + 4 + 1 + + + LM + Loop mode + 5 + 1 + + + PINCM + Peripheral increment mode + 6 + 1 + + + MINCM + Memory increment mode + 7 + 1 + + + PWIDTH + Peripheral data bit width + 8 + 2 + + + MWIDTH + Memory data bit width + 10 + 2 + + + CHPL + Channel Priority level + 12 + 2 + + + M2M + Memory to memory mode + 14 + 1 + + + + + C2DTCNT + C2DTCNT + DMA channel 2 number of data to transferregister + 0x20 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data to transfer + 0 + 16 + + + + + C2PADDR + C2PADDR + DMA channel 2 peripheral base address register + 0x24 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + C2MADDR + C2MADDR + DMA channel 2 memory base address register + 0x28 + 0x20 + read-write + 0x00000000 + + + MADDR + Memory address + 0 + 32 + + + + + C3CTRL + C3CTRL + DMA channel configuration register (DMA_C3CTRL) + 0x30 + 0x20 + read-write + 0x00000000 + + + CHEN + Channel enable + 0 + 1 + + + FDTIEN + Transfer complete interrupt enable + 1 + 1 + + + HDTIEN + Half transfer interrupt enable + 2 + 1 + + + DTERRIEN + Transfer error interrupt enable + 3 + 1 + + + DTD + Data transfer direction + 4 + 1 + + + LM + Loop mode + 5 + 1 + + + PINCM + Peripheral increment mode + 6 + 1 + + + MINCM + Memory increment mode + 7 + 1 + + + PWIDTH + Peripheral data bit width + 8 + 2 + + + MWIDTH + Memory data bit width + 10 + 2 + + + CHPL + Channel Priority level + 12 + 2 + + + M2M + Memory to memory mode + 14 + 1 + + + + + C3DTCNT + C3DTCNT + DMA channel 3 number of data to transfer register + 0x34 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data to transfer + 0 + 16 + + + + + C3PADDR + C3PADDR + DMA channel 3 peripheral base address register + 0x38 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + C3MADDR + C3MADDR + DMA channel 3 memory base address register + 0x3C + 0x20 + read-write + 0x00000000 + + + MADDR + Memory address + 0 + 32 + + + + + C4CTRL + C4CTRL + DMA channel configuration register (DMA_C4CTRL) + 0x44 + 0x20 + read-write + 0x00000000 + + + CHEN + Channel enable + 0 + 1 + + + FDTIEN + Transfer complete interrupt enable + 1 + 1 + + + HDTIEN + Half transfer interrupt enable + 2 + 1 + + + DTERRIEN + Transfer error interrupt enable + 3 + 1 + + + DTD + Data transfer direction + 4 + 1 + + + LM + Loop mode + 5 + 1 + + + PINCM + Peripheral increment mode + 6 + 1 + + + MINCM + Memory increment mode + 7 + 1 + + + PWIDTH + Peripheral data bit width + 8 + 2 + + + MWIDTH + Memory data bit width + 10 + 2 + + + CHPL + Channel Priority level + 12 + 2 + + + M2M + Memory to memory mode + 14 + 1 + + + + + C4DTCNT + C4DTCNT + DMA channel 4 number of data to transfer register + 0x48 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data to transfer + 0 + 16 + + + + + C4PADDR + C4PADDR + DMA channel 4 peripheral base address register + 0x4C + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + C4MADDR + C4MADDR + DMA channel 4 memory base address register + 0x50 + 0x20 + read-write + 0x00000000 + + + MADDR + Memory address + 0 + 32 + + + + + C5CTRL + C5CTRL + DMA channel configuration register (DMA_C5CTRL) + 0x58 + 0x20 + read-write + 0x00000000 + + + CHEN + Channel enable + 0 + 1 + + + FDTIEN + Transfer complete interrupt enable + 1 + 1 + + + HDTIEN + Half transfer interrupt enable + 2 + 1 + + + DTERRIEN + Transfer error interrupt enable + 3 + 1 + + + DTD + Data transfer direction + 4 + 1 + + + LM + Loop mode + 5 + 1 + + + PINCM + Peripheral increment mode + 6 + 1 + + + MINCM + Memory increment mode + 7 + 1 + + + PWIDTH + Peripheral data bit width + 8 + 2 + + + MWIDTH + Memory data bit width + 10 + 2 + + + CHPL + Channel Priority level + 12 + 2 + + + M2M + Memory to memory mode + 14 + 1 + + + + + C5DTCNT + C5DTCNT + DMA channel 5 number of data to transfer register + 0x5C + 0x20 + read-write + 0x00000000 + + + CNT + Number of data to transfer + 0 + 16 + + + + + C5PADDR + C5PADDR + DMA channel 5 peripheral base address register + 0x60 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + C5MADDR + C5MADDR + DMA channel 5 memory base address register + 0x64 + 0x20 + read-write + 0x00000000 + + + MADDR + Memory address + 0 + 32 + + + + + C6CTRL + C6CTRL + DMA channel configuration register(DMA_C6CTRL) + 0x6C + 0x20 + read-write + 0x00000000 + + + CHEN + Channel enable + 0 + 1 + + + FDTIEN + Transfer complete interrupt enable + 1 + 1 + + + HDTIEN + Half transfer interrupt enable + 2 + 1 + + + DTERRIEN + Transfer error interrupt enable + 3 + 1 + + + DTD + Data transfer direction + 4 + 1 + + + LM + Loop mode + 5 + 1 + + + PINCM + Peripheral increment mode + 6 + 1 + + + MINCM + Memory increment mode + 7 + 1 + + + PWIDTH + Peripheral data bit width + 8 + 2 + + + MWIDTH + Memory data bit width + 10 + 2 + + + CHPL + Channel Priority level + 12 + 2 + + + M2M + Memory to memory mode + 14 + 1 + + + + + C6DTCNT + C6DTCNT + DMA channel 6 number of data to transfer register + 0x70 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data to transfer + 0 + 16 + + + + + C6PADDR + C6PADDR + DMA channel 6 peripheral address base register + 0x74 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + C6MADDR + C6MADDR + DMA channel 6 memory address base register + 0x78 + 0x20 + read-write + 0x00000000 + + + MADDR + Memory address + 0 + 32 + + + + + C7CTRL + C7CTRL + DMA channel configuration register(DMA_C7CTRL) + 0x80 + 0x20 + read-write + 0x00000000 + + + CHEN + Channel enable + 0 + 1 + + + FDTIEN + Transfer complete interrupt enable + 1 + 1 + + + HDTIEN + Half transfer interrupt enable + 2 + 1 + + + DTERRIEN + Transfer error interrupt enable + 3 + 1 + + + DTD + Data transfer direction + 4 + 1 + + + LM + Loop mode + 5 + 1 + + + PINCM + Peripheral increment mode + 6 + 1 + + + MINCM + Memory increment mode + 7 + 1 + + + PWIDTH + Peripheral data bit width + 8 + 2 + + + MWIDTH + Memory data bit width + 10 + 2 + + + CHPL + Channel Priority level + 12 + 2 + + + M2M + Memory to memory mode + 14 + 1 + + + + + C7DTCNT + C7DTCNT + DMA channel 7 number of data to transfer register + 0x84 + 0x20 + read-write + 0x00000000 + + + CNT + Number of data to transfer + 0 + 16 + + + + + C7PADDR + C7PADDR + DMA channel 7 peripheral base address register + 0x88 + 0x20 + read-write + 0x00000000 + + + PADDR + Peripheral address + 0 + 32 + + + + + C7MADDR + C7MADDR + DMA channel 7 memory base address register + 0x8C + 0x20 + read-write + 0x00000000 + + + MADDR + Memory address + 0 + 32 + + + + + DMA_MUXSEL + DMA_MUXSEL + DMAMUX Table Selection + 0x100 + 0x20 + 0x00000000 + + + TBL_SEL + Multiplexer Table Select + 0 + 1 + read-write + + + + + MUXC1CTRL + MUXC1CTRL + Channel 1 Configuration Register + 0x104 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization Identification + 24 + 5 + read-write + + + + + MUXC2CTRL + MUXC2CTRL + Channel 2 Configuration Register + 0x108 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization Identification + 24 + 5 + read-write + + + + + MUXC3CTRL + MUXC3CTRL + Channel 3 Configuration Register + 0x10C + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization Identification + 24 + 5 + read-write + + + + + MUXC4CTRL + MUXC4CTRL + Channel 4 Configuration Register + 0x110 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization Identification + 24 + 5 + read-write + + + + + MUXC5CTRL + MUXC5CTRL + Channel 5 Configuration Register + 0x114 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization Identification + 24 + 5 + read-write + + + + + MUXC6CTRL + MUXC6CTRL + Channel 6 Configuration Register + 0x118 + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization Identification + 24 + 5 + read-write + + + + + MUXC7CTRL + MUXC7CTRL + Channel 7 Configuration Register + 0x11C + 0x20 + 0x00000000 + + + REQSEL + DMA request select + 0 + 7 + read-write + + + SYNCOVIEN + Synchronization overrun interrupt enable + 8 + 1 + read-write + + + EVTGEN + Event generation enable + 9 + 1 + read-write + + + SYNCEN + Synchroniztion enable + 16 + 1 + read-write + + + SYNCPOL + Synchronization polarity + 17 + 2 + read-write + + + REQCNT + Number of DMA requests + 19 + 5 + read-write + + + SYNCSEL + Synchronization Identification + 24 + 5 + read-write + + + + + MUXG1CTRL + MUXG1CTRL + Generator 1 Configuration Register + 0x120 + 0x20 + 0x00000000 + + + SIGSEL + Signal select + 0 + 5 + read-write + + + TRGOVIEN + Trigger overrun interrupt enable + 8 + 1 + read-write + + + GEN + DMA request generator enable + 16 + 1 + read-write + + + GPOL + DMA request generator trigger polarity + 17 + 2 + read-write + + + GREQCNT + Number of DMA requests to be generated + 19 + 5 + read-write + + + + + MUXG2CTRL + MUXG2CTRL + Generator 2 Configuration Register + 0x124 + 0x20 + 0x00000000 + + + SIGSEL + Signal select + 0 + 5 + read-write + + + TRGOVIEN + Trigger overrun interrupt enable + 8 + 1 + read-write + + + GEN + DMA request generator enable + 16 + 1 + read-write + + + GPOL + DMA request generator trigger polarity + 17 + 2 + read-write + + + GREQCNT + Number of DMA requests to be generated + 19 + 5 + read-write + + + + + MUXG3CTRL + MUXG3CTRL + Generator 3 Configuration Register + 0x128 + 0x20 + 0x00000000 + + + SIGSEL + Signal select + 0 + 5 + read-write + + + TRGOVIEN + Trigger overrun interrupt enable + 8 + 1 + read-write + + + GEN + DMA request generator enable + 16 + 1 + read-write + + + GPOL + DMA request generator trigger polarity + 17 + 2 + read-write + + + GREQCNT + Number of DMA requests to be generated + 19 + 5 + read-write + + + + + MUXG4CTRL + MUXG4CTRL + Generator 4 Configuration Register + 0x12C + 0x20 + 0x00000000 + + + SIGSEL + Signal select + 0 + 5 + read-write + + + TRGOVIEN + Trigger overrun interrupt enable + 8 + 1 + read-write + + + GEN + DMA request generator enable + 16 + 1 + read-write + + + GPOL + DMA request generator trigger polarity + 17 + 2 + read-write + + + GREQCNT + Number of DMA requests to be generated + 19 + 5 + read-write + + + + + MUXSYNCSTS + MUXSYNCSTS + Channel Interrupt Status Register + 0x130 + 0x20 + 0x00000000 + + + SYNCOVF1 + Synchronizaton overrun interrupt flag + 0 + 1 + read-only + + + SYNCOVF2 + Synchronizaton overrun interrupt flag + 1 + 1 + read-only + + + SYNCOVF3 + Synchronizaton overrun interrupt flag + 2 + 1 + read-only + + + SYNCOVF4 + Synchronizaton overrun interrupt flag + 3 + 1 + read-only + + + SYNCOVF5 + Synchronizaton overrun interrupt flag + 4 + 1 + read-only + + + SYNCOVF6 + Synchronizaton overrun interrupt flag + 5 + 1 + read-only + + + SYNCOVF7 + Synchronizaton overrun interrupt flag + 6 + 1 + read-only + + + + + MUXSYNCCLR + MUXSYNCCLR + Channel Interrupt Clear Flag Register + 0x134 + 0x20 + 0x00000000 + + + SYNCOVFC1 + Clear synchronizaton overrun interrupt flag + 0 + 1 + read-write + + + SYNCOVFC2 + Clear synchronizaton overrun interrupt flag + 1 + 1 + read-write + + + SYNCOVFC3 + Clear synchronizaton overrun interrupt flag + 2 + 1 + read-write + + + SYNCOVFC4 + Clear synchronizaton overrun interrupt flag + 3 + 1 + read-write + + + SYNCOVFC5 + Clear synchronizaton overrun interrupt flag + 4 + 1 + read-write + + + SYNCOVFC6 + Clear synchronizaton overrun interrupt flag + 5 + 1 + read-write + + + SYNCOVFC7 + Clear synchronizaton overrun interrupt flag + 6 + 1 + read-write + + + + + MUXGSTS + MUXGSTS + Generator Interrupt Status Register + 0x138 + 0x20 + 0x00000000 + + + TRGOVF1 + Trigger overrun interrupt flag + 0 + 1 + read-write + + + TRGOVF2 + Trigger overrun interrupt flag + 1 + 1 + read-write + + + TRGOVF3 + Trigger overrun interrupt flag + 2 + 1 + read-write + + + TRGOVF4 + Trigger overrun interrupt flag + 3 + 1 + read-write + + + + + MUXGCLR + MUXGCLR + Generator Interrupt Clear Flag Register + 0x13C + 0x20 + 0x00000000 + + + TRGOVFC1 + Clear trigger overrun interrupt flag + 0 + 1 + read-write + + + TRGOVFC2 + Clear trigger overrun interrupt flag + 1 + 1 + read-write + + + TRGOVFC3 + Clear trigger overrun interrupt flag + 2 + 1 + read-write + + + TRGOVFC4 + Clear trigger overrun interrupt flag + 3 + 1 + read-write + + + + + + + DMA2 + 0x40026600 + + + SDIO1 + Secure digital input/output + interface + SDIO + 0x4002C400 + + 0x0 + 0x400 + registers + + + SDIO1 + SDIO1 global interrupt + 49 + + + + PWRCTRL + PWRCTRL + Bits 1:0 = PWRCTRL: Power supply control + bits + 0x0 + 0x20 + read-write + 0x00000000 + + + PS + Power switch + 0 + 2 + + + + + CLKCTRL + CLKCTRL + SD clock control register + (SDIO_CLKCTRL) + 0x4 + 0x20 + read-write + 0x00000000 + + + CLKDIV + Clock division + 0 + 8 + + + CLKOEN + Clock output enable + 8 + 1 + + + PWRSVEN + Power saving mode enable + 9 + 1 + + + BYPSEN + Clock divider bypass enable + bit + 10 + 1 + + + BUSWS + Bus width selection + 11 + 2 + + + CLKEDS + SDIO_CK edge selection bit + 13 + 1 + + + HFCEN + Hardware flow control enable + 14 + 1 + + + CLKDIV98 + Clock divide factor bit9 and bit8 + 15 + 2 + + + + + ARGU + ARGU + Bits 31:0 = : Command argument + 0x8 + 0x20 + read-write + 0x00000000 + + + ARGU + Command argument + 0 + 32 + + + + + CMDCTRL + CMDCTRL + SDIO command control register + (SDIO_CMDCTRL) + 0xC + 0x20 + read-write + 0x00000000 + + + CMDIDX + CMDIDX + 0 + 6 + + + RSPWT + Wait for response + 6 + 2 + + + INTWT + CCSM wait for interrupt + 8 + 1 + + + PNDWT + CCSM wait for end of transfer + 9 + 1 + + + CCSMEN + Command channel state machine + 10 + 1 + + + IOSUSP + SD I/O suspend command + 11 + 1 + + + + + RSPCMD + RSPCMD + SDIO command register + 0x10 + 0x20 + read-only + 0x00000000 + + + RSPCMD + RSPCMD + 0 + 6 + + + + + RSP1 + RSP1 + Bits 31:0 = CARDSTATUS1 + 0x14 + 0x20 + read-only + 0x00000000 + + + CARDSTS1 + CARDSTATUS1 + 0 + 32 + + + + + RSP2 + RSP2 + Bits 31:0 = CARDSTATUS2 + 0x18 + 0x20 + read-only + 0x00000000 + + + CARDSTS2 + CARDSTATUS2 + 0 + 32 + + + + + RSP3 + RSP3 + Bits 31:0 = CARDSTATUS3 + 0x1C + 0x20 + read-only + 0x00000000 + + + CARDSTS2 + CARDSTATUS3 + 0 + 32 + + + + + RSP4 + RSP4 + Bits 31:0 = CARDSTATUS4 + 0x20 + 0x20 + read-only + 0x00000000 + + + CARDSTS2 + CARDSTATUS4 + 0 + 32 + + + + + DTTMR + DTTMR + Bits 31:0 = TIMEOUT: Data timeout + period + 0x24 + 0x20 + read-write + 0x00000000 + + + TIMEOUT + Data timeout period + 0 + 32 + + + + + DTLEN + DTLEN + Bits 24:0 = DATALENGTH: Data length + value + 0x28 + 0x20 + read-write + 0x00000000 + + + DTLEN + Data length value + 0 + 25 + + + + + DTCTRL + DTCTRL + SDIO data control register + (SDIO_DCTRL) + 0x2C + 0x20 + read-write + 0x00000000 + + + TFREN + DTEN + 0 + 1 + + + TFRDIR + DTDIR + 1 + 1 + + + TFRMODE + DTMODE + 2 + 1 + + + DMAEN + DMAEN + 3 + 1 + + + BLKSIZE + DBLOCKSIZE + 4 + 4 + + + RDWTSTART + PWSTART + 8 + 1 + + + RDWTSTOP + PWSTOP + 9 + 1 + + + RDWTMODE + RWMOD + 10 + 1 + + + IOEN + SD I/O function enable + 11 + 1 + + + + + DTCNT + DTCNT + Bits 24:0 = DATACOUNT: Data count + value + 0x30 + 0x20 + read-only + 0x00000000 + + + CNT + Data count value + 0 + 25 + + + + + STS + STS + SDIO status register + (SDIO_STA) + 0x34 + 0x20 + read-only + 0x00000000 + + + CMDFAIL + Command crc fail + 0 + 1 + + + DTFAIL + Data crc fail + 1 + 1 + + + CMDTIMEOUT + Command timeout + 2 + 1 + + + DTTIMEOUT + Data timeout + 3 + 1 + + + TXERRU + Tx under run error + 4 + 1 + + + RXERRO + Rx over run error + 5 + 1 + + + CMDRSPCMPL + Command response complete + 6 + 1 + + + CMDCMPL + Command sent + 7 + 1 + + + DTCMPL + Data sent + 8 + 1 + + + SBITERR + Start bit error + 9 + 1 + + + DTBLKCMPL + Data block sent + 10 + 1 + + + DOCMD + Command transfer in progress + 11 + 1 + + + DOTX + Data transmit in progress + 12 + 1 + + + DORX + Data receive in progress + 13 + 1 + + + TXBUFH + Tx buffer half empty + 14 + 1 + + + RXBUFH + Rx buffer half empty + 15 + 1 + + + TXBUFF + Tx buffer full + 16 + 1 + + + RXBUFF + Rx buffer full + 17 + 1 + + + TXBUFE + Tx buffer empty + 18 + 1 + + + RXBUFE + Rx buffer empty + 19 + 1 + + + TXBUF + Tx data vaild + 20 + 1 + + + RXBUF + Rx data vaild + 21 + 1 + + + IOIF + SD I/O interrupt + 22 + 1 + + + + + INTCLR + INTCLR + SDIO interrupt clear register + (SDIO_INTCLR) + 0x38 + 0x20 + read-write + 0x00000000 + + + CMDFAIL + Command crc fail flag clear + 0 + 1 + + + DTFAIL + Data crc fail flag clear + 1 + 1 + + + CMDTIMEOUT + Command timeout flag clear + 2 + 1 + + + DTTIMEOUT + Data timeout flag clear + 3 + 1 + + + TXERRU + Tx under run error flag clear + 4 + 1 + + + RXERRU + Rx over run error flag clear + 5 + 1 + + + CMDRSPCMPL + Command response complete flag clear + 6 + 1 + + + CMDCMPL + Command sent flag clear + 7 + 1 + + + DTCMPL + Data sent flag clear + 8 + 1 + + + SBITERR + Start bit error flag clear + 9 + 1 + + + DTBLKCMPL + Data block sent clear + 10 + 1 + + + IOIF + SD I/O interrupt flag clear + 22 + 1 + + + + + INTEN + INTEN + SDIO mask register (SDIO_MASK) + 0x3C + 0x20 + read-write + 0x00000000 + + + CMDFAILIEN + Command crc fail interrupt enable + 0 + 1 + + + DTFAILIEN + Data crc fail interrupt enable + 1 + 1 + + + CMDTIMEOUTIEN + Command timeout interrupt enable + 2 + 1 + + + DTTIMEOUTIEN + Data timeout interrupt enable + 3 + 1 + + + TXERRUIEN + Tx under run interrupt enable + 4 + 1 + + + RXERRUIEN + Rx over run interrupt enable + 5 + 1 + + + CMDRSPCMPLIEN + Command response complete interrupt enable + 6 + 1 + + + CMDCMPLIEN + Command sent complete interrupt enable + 7 + 1 + + + DTCMPLIEN + Data sent complete interrupt enable + 8 + 1 + + + SBITERRIEN + Start bit error interrupt enable + 9 + 1 + + + DTBLKCMPLIEN + Data block sent complete interrupt enable + 10 + 1 + + + DOCMDIEN + Command acting interrupt enable + 11 + 1 + + + DOTXIEN + Data transmit acting interrupt enable + 12 + 1 + + + DORXIEN + Data receive acting interrupt enable + 13 + 1 + + + TXBUFHIEN + Tx buffer half empty interrupt enable + 14 + 1 + + + RXBUFHIEN + Rx buffer half empty interrupt enable + 15 + 1 + + + TXBUFFIEN + Tx buffer full interrupt enable + 16 + 1 + + + RXBUFFIEN + Rx buffer full interrupt enable + 17 + 1 + + + TXBUFEIEN + Tx buffer empty interrupt enable + 18 + 1 + + + RXBUFEIEN + Rx buffer empty interrupt enable + 19 + 1 + + + TXBUFIEN + Tx buffer data vaild interrupt enable + 20 + 1 + + + RXBUFIEN + Rx buffer data vaild interrupt enable + 21 + 1 + + + IOIFIEN + SD I/O interrupt enable + 22 + 1 + + + + + BUFCNT + BUFCNT + Bits 23:0 = BUFCOUNT: Remaining number of + words to be written to or read from the + FIFO + 0x48 + 0x20 + read-only + 0x00000000 + + + CNT + FIF0COUNT + 0 + 24 + + + + + BUF + BUF + bits 31:0 = Buffer Data: Receive and transmit + buffer data + 0x80 + 0x20 + read-write + 0x00000000 + + + DT + Buffer data + 0 + 32 + + + + + + + SDIO2 + 0x50061000 + + SDIO2 + SDIO2 global interrupt + 102 + + + + ERTC + Real-time clock + ERTC + 0x40002800 + + 0x0 + 0x400 + registers + + + + TIME + TIME + time register + 0x0 + 0x20 + read-write + 0x00000000 + + + AMPM + AM/PM notation + 22 + 1 + + + HT + Hour tens + 20 + 2 + + + HU + Hour units + 16 + 4 + + + MT + Minute tens + 12 + 3 + + + MU + Minute units + 8 + 4 + + + ST + Second tens + 4 + 3 + + + SU + Second units + 0 + 4 + + + + + DATE + DATE + date register + 0x4 + 0x20 + read-write + 0x00002101 + + + YT + Year tens + 20 + 4 + + + YU + Year units + 16 + 4 + + + WK + Week + 13 + 3 + + + MT + Month tens + 12 + 1 + + + MU + Month units + 8 + 4 + + + DT + Date tens + 4 + 2 + + + DU + Date units + 0 + 4 + + + + + CTRL + CTRL + control register + 0x8 + 0x20 + read-write + 0x00000000 + + + CALOEN + Calibration output enable + 23 + 1 + + + OUTSEL + Output source selection + 21 + 2 + + + OUTP + Output polarity + 20 + 1 + + + CALOSEL + Calibration output selection + 19 + 1 + + + BPR + Battery power domain data register + 18 + 1 + + + DEC1H + Decrease 1 hour + 17 + 1 + + + ADD1H + Add 1 hour + 16 + 1 + + + TSIEN + Timestamp interrupt enable + 15 + 1 + + + WATIEN + Wakeup timer interrupt enable + 14 + 1 + + + ALBIEN + Alarm B interrupt enable + 13 + 1 + + + ALAIEN + Alarm A interrupt enable + 12 + 1 + + + TSEN + Timestamp enable + 11 + 1 + + + WATEN + Wakeup timer enable + 10 + 1 + + + ALBEN + Alarm B enable + 9 + 1 + + + ALAEN + Alarm A enable + 8 + 1 + + + CCALEN + Coarse calibration enable + 7 + 1 + + + HM + Hour mode + 6 + 1 + + + DREN + Date/time register direct read enable + 5 + 1 + + + RCDEN + Reference clock detection enable + 4 + 1 + + + TSEDG + Timestamp trigger edge + 3 + 1 + + + WATCLK + Wakeup timer clock selection + 0 + 3 + + + + + STS + STS + initialization and status + register + 0xC + 0x20 + 0x00000007 + + + ALAWF + Alarm A register allows write flag + 0 + 1 + read-only + + + ALBWF + Alarm B register allows write flag + 1 + 1 + read-only + + + WATWF + Wakeup timer register allows write flag + 2 + 1 + read-only + + + TADJF + Time adjustment flag + 3 + 1 + read-write + + + INITF + Calendar initialization flag + 4 + 1 + read-only + + + UPDF + Calendar update flag + 5 + 1 + read-write + + + IMF + Enter initialization mode flag + 6 + 1 + read-only + + + IMEN + Initialization mode enable + 7 + 1 + read-write + + + ALAF + Alarm A flag + 8 + 1 + read-write + + + ALBF + Alarm B flag + 9 + 1 + read-write + + + WATF + Wakeup timer flag + 10 + 1 + read-write + + + TSF + Timestamp flag + 11 + 1 + read-write + + + TSOF + Timestamp overflow flag + 12 + 1 + read-write + + + TP1F + Tamper detection 1 flag + 13 + 1 + read-write + + + TP2F + Tamper detection 2 flag + 14 + 1 + read-write + + + CALUPDF + Calibration value update completed flag + 16 + 1 + read-only + + + + + DIV + DIV + Diveder register + 0x10 + 0x20 + read-write + 0x007F00FF + + + DIVA + Diveder A + 16 + 7 + + + DIVB + Diveder B + 0 + 15 + + + + + WAT + WAT + Wakeup timer register + 0x14 + 0x20 + read-write + 0x0000FFFF + + + VAL + Wakeup timer reload value + 0 + 16 + + + + + CCAL + CCAL + Calibration register + 0x18 + 0x20 + read-write + 0x00000000 + + + CALDIR + Calibration direction + 7 + 1 + + + CALVAL + Calibration value + 0 + 5 + + + + + ALA + ALA + Alarm A register + 0x1C + 0x20 + read-write + 0x00000000 + + + MASK4 + Date/week mask + 31 + 1 + + + WKSEL + Date/week mode select + 30 + 1 + + + DT + Date tens + 28 + 2 + + + DU + Date units + 24 + 4 + + + MASK3 + Hours mask + 23 + 1 + + + AMPM + AM/PM + 22 + 1 + + + HT + Hour tens + 20 + 2 + + + HU + Hour units + 16 + 4 + + + MASK2 + Minutes mask + 15 + 1 + + + MT + Minute tens + 12 + 3 + + + MU + Minute units + 8 + 4 + + + MASK1 + Seconds mask + 7 + 1 + + + ST + Second tens + 4 + 3 + + + SU + Second units + 0 + 4 + + + + + ALB + ALB + Alarm B register + 0x20 + 0x20 + read-write + 0x00000000 + + + MASK4 + Date/week mask + 31 + 1 + + + WKSEL + Date/week mode select + 30 + 1 + + + DT + Date tens + 28 + 2 + + + DU + Date units + 24 + 4 + + + MASK3 + Hours mask + 23 + 1 + + + AMPM + AM/PM + 22 + 1 + + + HT + Hour tens + 20 + 2 + + + HU + Hour units + 16 + 4 + + + MASK2 + Minutes mask + 15 + 1 + + + MT + Minute tens + 12 + 3 + + + MU + Minute units + 8 + 4 + + + MASK1 + Seconds mask + 7 + 1 + + + ST + Second tens + 4 + 3 + + + SU + Second units + 0 + 4 + + + + + WP + WP + write protection register + 0x24 + 0x20 + write-only + 0x00000000 + + + CMD + Command register + 0 + 8 + + + + + SBS + SBS + sub second register + 0x28 + 0x20 + read-only + 0x00000000 + + + SBS + Sub second value + 0 + 16 + + + + + TADJ + TADJ + time adjust register + 0x2C + 0x20 + write-only + 0x00000000 + + + ADD1S + Add 1 second + 31 + 1 + + + DECSBS + Decrease sub-second value + 0 + 15 + + + + + TSTM + TSTM + time stamp time register + 0x30 + 0x20 + read-only + 0x00000000 + + + AMPM + AMPM + 22 + 1 + + + HT + Hour tens + 20 + 2 + + + HU + Hour units + 16 + 4 + + + MT + Minute tens + 12 + 3 + + + MU + Minute units + 8 + 4 + + + ST + Second tens + 4 + 3 + + + SU + Second units + 0 + 4 + + + + + TSDT + TSDT + timestamp date register + 0x34 + 0x20 + read-only + 0x00000000 + + + WK + Week + 13 + 3 + + + MT + Month tens + 12 + 1 + + + MU + Month units + 8 + 4 + + + DT + Date tens + 4 + 2 + + + DU + Date units + 0 + 4 + + + + + TSSBS + TSSBS + timestamp sub second register + 0x38 + 0x20 + read-only + 0x00000000 + + + SBS + Sub second value + 0 + 16 + + + + + SCAL + SCAL + calibration register + 0x3C + 0x20 + read-write + 0x00000000 + + + ADD + Add ERTC clock + 15 + 1 + + + CAL8 + 8-second calibration period + 14 + 1 + + + CAL16 + 16 second calibration period + 13 + 1 + + + DEC + Decrease ERTC clock + 0 + 9 + + + + + TAMP + TAMP + tamper and alternate function configuration + register + 0x40 + 0x20 + read-write + 0x00000000 + + + OUTTYPE + Output type + 18 + 1 + + + TSPIN + Time stamp detection pin selection + 17 + 1 + + + TP1PIN + Tamper detection pin selection + 16 + 1 + + + TPPU + Tamper detection pull-up + 15 + 1 + + + TPPR + Tamper detection pre-charge time + 13 + 2 + + + TPFLT + Tamper detection filter time + 11 + 2 + + + TPFREQ + Tamper detection frequency + 8 + 3 + + + TPTSEN + Tamper detection timestamp enable + 7 + 1 + + + TP2EDG + Tamper detection 2 valid edge + 4 + 1 + + + TP2EN + Tamper detection 2 enable + 3 + 1 + + + TPIEN + Tamper detection interrupt enable + 2 + 1 + + + TP1EDG + Tamper detection 1 valid edge + 1 + 1 + + + TP1EN + Tamper detection 1 enable + 0 + 1 + + + + + ALASBS + ALASBS + alarm A sub second register + 0x44 + 0x20 + read-write + 0x00000000 + + + SBSMSK + Sub-second mask + 24 + 4 + + + SBS + Sub-seconds value + 0 + 15 + + + + + ALBSBS + ALBSBS + alarm B sub second register + 0x48 + 0x20 + read-write + 0x00000000 + + + SBSMSK + Sub-second mask + 24 + 4 + + + SBS + Sub-seconds value + 0 + 15 + + + + + BPR1DT + BPR1DT + Battery powered domain register + 0x50 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR2DT + BPR2DT + Battery powered domain register + 0x54 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR3DT + BPR3DT + Battery powered domain register + 0x58 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR4DT + BPR4DT + Battery powered domain register + 0x5C + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR5DT + BPR5DT + Battery powered domain register + 0x60 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR6DT + BPR6DT + Battery powered domain register + 0x64 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR7DT + BPR7DT + Battery powered domain register + 0x68 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR8DT + BPR8DT + Battery powered domain register + 0x6C + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR9DT + BPR9DT + Battery powered domain register + 0x70 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR10DT + BPR10DT + Battery powered domain register + 0x74 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR11DT + BPR11DT + Battery powered domain register + 0x78 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR12DT + BPR12DT + Battery powered domain register + 0x7C + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR13DT + BPR13DT + Battery powered domain register + 0x80 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR14DT + BPR14DT + Battery powered domain register + 0x84 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR15DT + BPR15DT + Battery powered domain register + 0x88 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR16DT + BPR16DT + Battery powered domain register + 0x8C + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR17DT + BPR17DT + Battery powered domain register + 0x90 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR18DT + BPR18DT + Battery powered domain register + 0x94 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR19DT + BPR19DT + Battery powered domain register + 0x98 + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + BPR20DT + BPR20DT + Battery powered domain register + 0x9C + 0x20 + read-write + 0x00000000 + + + DT + Battery powered domain data + 0 + 32 + + + + + + + WDT + Watchdog + WDT + 0x40003000 + + 0x0 + 0x400 + registers + + + + CMD + CMD + Command register + 0x0 + 0x20 + write-only + 0x00000000 + + + CMD + Command register + 0 + 16 + + + + + DIV + DIV + Division register + 0x4 + 0x20 + read-write + 0x00000000 + + + DIV + Division divider + 0 + 3 + + + + + RLD + RLD + Reload register + 0x8 + 0x20 + read-write + 0x00000FFF + + + RLD + Reload value + 0 + 12 + + + + + STS + STS + Status register + 0xC + 0x20 + read-only + 0x00000000 + + + DIVF + Division value update complete flag + 0 + 1 + + + RLDF + Reload value update complete flag + 1 + 1 + + + WINF + Window value update complete flag + 2 + 1 + + + + + WIN + WIN + Window register + 0x10 + 0x20 + read-write + 0x00000FFF + + + WIN + Window value + 0 + 12 + + + + + + + WWDT + Window watchdog + WWDT + 0x40002C00 + + 0x0 + 0x400 + registers + + + WWDT + Window Watchdog interrupt + 0 + + + + CTRL + CTRL + Control register + 0x0 + 0x20 + read-write + 0x0000007F + + + CNT + Decrement counter + 0 + 7 + + + WWDTEN + Window watchdog enable + 7 + 1 + + + + + CFG + CFG + Configuration register + 0x4 + 0x20 + read-write + 0x0000007F + + + WIN + Window value + 0 + 7 + + + DIV + Clock division value + 7 + 2 + + + RLDIEN + Reload counter interrupt + 9 + 1 + + + + + STS + STS + Status register + 0x8 + 0x20 + read-write + 0x00000000 + + + RLDF + Reload counter interrupt flag + 0 + 1 + + + + + + + TMR1 + Advanced timer + TIMER + 0x40010000 + + 0x0 + 0x400 + registers + + + TMR1_BRK_TMR9 + TMR1 brake interrupt and TMR9 global + interrupt + 24 + + + TMR1_OVF_TMR10 + TMR1 overflow interrupt and TMR10 global + interrupt + 25 + + + TMR1_TRG_HALL_TMR11 + TMR1 trigger and HALL interrupts and + TMR11 global interrupt + 26 + + + TMR1_CH + TMR1 channel interrupt + 27 + + + + CTRL1 + CTRL1 + Control register 1 + 0x0 + 0x20 + read-write + 0x0000 + + + CLKDIV + Clock divider + 8 + 2 + + + PRBEN + Period buffer enable + 7 + 1 + + + TWCMSEL + Two-way count mode + selection + 5 + 2 + + + OWCDIR + One-way count direction + 4 + 1 + + + OCMEN + One cycle mode enable + 3 + 1 + + + OVFS + Overflow event source + 2 + 1 + + + OVFEN + Overflow event enable + 1 + 1 + + + TMREN + TMR enable + 0 + 1 + + + + + CTRL2 + CTRL2 + Control register 2 + 0x4 + 0x20 + read-write + 0x0000 + + + TRGOUT2EN + TRGOUT2 enable + 31 + 1 + + + C4IOS + Channel 4 idle output state + 14 + 1 + + + C3CIOS + Channel 3 complementary idle output state + 13 + 1 + + + C3IOS + Channel 3 idle output state + 12 + 1 + + + C2CIOS + Channel 2 complementary idle output state + 11 + 1 + + + C2IOS + Channel 2 idle output state + 10 + 1 + + + C1CIOS + Channel 1 complementary idle output state + 9 + 1 + + + C1IOS + Channel 1 idle output state + 8 + 1 + + + C1INSEL + C1IN selection + 7 + 1 + + + PTOS + Primary TMR output selection + 4 + 3 + + + DRS + DMA request source + 3 + 1 + + + CCFS + Channel control bit flash select + 2 + 1 + + + CBCTRL + Channel buffer control + 0 + 1 + + + + + STCTRL + STCTRL + Subordinate TMR control register + 0x8 + 0x20 + read-write + 0x0000 + + + ESP + External signal polarity + 15 + 1 + + + ECMBEN + External clock mode B enable + 14 + 1 + + + ESDIV + External signal divider + 12 + 2 + + + ESF + External signal filter + 8 + 4 + + + STS + Subordinate TMR synchronization + 7 + 1 + + + STIS + Subordinate TMR input selection + 4 + 3 + + + SMSEL + Subordinate TMR mode selection + 0 + 3 + + + + + IDEN + IDEN + Interrupt/DMA enable register + 0xC + 0x20 + read-write + 0x0000 + + + TDEN + Trigger DMA request enable + 14 + 1 + + + HALLDE + HALL DMA request enable + 13 + 1 + + + C4DEN + Channel 4 DMA request + enable + 12 + 1 + + + C3DEN + Channel 3 DMA request + enable + 11 + 1 + + + C2DEN + Channel 2 DMA request + enable + 10 + 1 + + + C1DEN + Channel 1 DMA request + enable + 9 + 1 + + + OVFDEN + Overflow DMA request enable + 8 + 1 + + + BRKIE + Brake interrupt enable + 7 + 1 + + + TIEN + Trigger interrupt enable + 6 + 1 + + + HALLIEN + HALL interrupt enable + 5 + 1 + + + C4IEN + Channel 4 interrupt + enable + 4 + 1 + + + C3IEN + Channel 3 interrupt + enable + 3 + 1 + + + C2IEN + Channel 2 interrupt + enable + 2 + 1 + + + C1IEN + Channel 1 interrupt + enable + 1 + 1 + + + OVFIEN + Overflow interrupt enable + 0 + 1 + + + + + ISTS + ISTS + Interrupt status register + 0x10 + 0x20 + read-write + 0x0000 + + + C4RF + Channel 4 recapture flag + 12 + 1 + + + C3RF + Channel 3 recapture flag + 11 + 1 + + + C2RF + Channel 2 recapture flag + 10 + 1 + + + C1RF + Channel 1 recapture flag + 9 + 1 + + + BRKIF + Brake interrupt flag + 7 + 1 + + + TRGIF + Trigger interrupt flag + 6 + 1 + + + HALLIF + HALL interrupt flag + 5 + 1 + + + C4IF + Channel 4 interrupt flag + 4 + 1 + + + C3IF + Channel 3 interrupt flag + 3 + 1 + + + C2IF + Channel 2 interrupt flag + 2 + 1 + + + C1IF + Channel 1 interrupt flag + 1 + 1 + + + OVFIF + Overflow interrupt flag + 0 + 1 + + + + + SWEVT + SWEVT + Software event register + 0x14 + 0x20 + read-write + 0x0000 + + + BRKSWTR + Brake event triggered by software + 7 + 1 + + + TRGSWTR + Trigger event triggered by software + 6 + 1 + + + HALLSWTR + HALL event triggered by software + 5 + 1 + + + C4SWTR + Channel 4 event triggered by software + 4 + 1 + + + C3SWTR + Channel 3 event triggered by software + 3 + 1 + + + C2SWTR + Channel 2 event triggered by software + 2 + 1 + + + C1SWTR + Channel 1 event triggered by software + 1 + 1 + + + OVFSWTR + Overflow event triggered by software + 0 + 1 + + + + + CM1_OUTPUT + CM1_OUTPUT + Channel output mode register + 0x18 + 0x20 + read-write + 0x00000000 + + + C2OSEN + Channel 2 output switch enable + 15 + 1 + + + C2OCTRL + Channel 2 output control + 12 + 3 + + + C2OBEN + Channel 2 output buffer enable + 11 + 1 + + + C2OIEN + Channel 2 output immediately enable + 10 + 1 + + + C2C + Channel 2 configure + 8 + 2 + + + C1OSEN + Channel 1 output switch enable + 7 + 1 + + + C1OCTRL + Channel 1 output control + 4 + 3 + + + C1OBEN + Channel 1 output buffer enable + 3 + 1 + + + C1OIEN + Channel 1 output immediately enable + 2 + 1 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM1_INPUT + CM1_INPUT + Channel input mode register 1 + CM1_OUTPUT + 0x18 + 0x20 + read-write + 0x00000000 + + + C2DF + Channel 2 digital filter + 12 + 4 + + + C2IDIV + Channel 2 input divider + 10 + 2 + + + C2C + Channel 2 configure + 8 + 2 + + + C1DF + Channel 1 digital filter + 4 + 4 + + + C1IDIV + Channel 1 input divider + 2 + 2 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM2_OUTPUT + CM2_OUTPUT + Channel output mode register 2 + 0x1C + 0x20 + read-write + 0x00000000 + + + C4OSEN + Channel 4 output switch enable + 15 + 1 + + + C4OCTRL + Channel 4 output control + 12 + 3 + + + C4OBEN + Channel 4 output buffer enable + 11 + 1 + + + C4OIEN + Channel 4 output immediately enable + 10 + 1 + + + C4C + Channel 4 configure + 8 + 2 + + + C3OSEN + Channel 3 output switch enable + 7 + 1 + + + C3OCTRL + Channel 3 output control + 4 + 3 + + + C3OBEN + Channel 3 output buffer enable + 3 + 1 + + + C3OIEN + Channel 3 output immediately enable + 2 + 1 + + + C3C + Channel 3 configure + 0 + 2 + + + + + CM2_INPUT + CM2_INPUT + Channel input mode register 2 + CM2_OUTPUT + 0x1C + 0x20 + read-write + 0x00000000 + + + C4DF + Channel 4 digital filter + 12 + 4 + + + C4IDIV + Channel 4 input divider + 10 + 2 + + + C4C + Channel 4 configure + 8 + 2 + + + C3DF + Channel 3 digital filter + 4 + 4 + + + C3IDIV + Channel 3 input divider + 2 + 2 + + + C3C + Channel 3 configure + 0 + 2 + + + + + CCTRL + CCTRL + Channel control + register + 0x20 + 0x20 + read-write + 0x0000 + + + C4P + Channel 4 Polarity + 13 + 1 + + + C4EN + Channel 4 enable + 12 + 1 + + + C3CP + Channel 3 complementary polarity + 11 + 1 + + + C3CEN + Channel 3 complementary enable + 10 + 1 + + + C3P + Channel 3 Polarity + 9 + 1 + + + C3EN + Channel 3 enable + 8 + 1 + + + C2CP + Channel 2 complementary polarity + 7 + 1 + + + C2CEN + Channel 2 complementary enable + 6 + 1 + + + C2P + Channel 2 Polarity + 5 + 1 + + + C2EN + Channel 2 enable + 4 + 1 + + + C1CP + Channel 1 complementary polarity + 3 + 1 + + + C1CEN + Channel 1 complementary enable + 2 + 1 + + + C1P + Channel 1 Polarity + 1 + 1 + + + C1EN + Channel 1 enable + 0 + 1 + + + + + CVAL + CVAL + Counter value + 0x24 + 0x20 + read-write + 0x00000000 + + + CVAL + Counter value + 0 + 16 + + + + + DIV + DIV + Divider value + 0x28 + 0x20 + read-write + 0x0000 + + + DIV + Divider value + 0 + 16 + + + + + PR + PR + Period value + 0x2C + 0x20 + read-write + 0x00000000 + + + PR + Period value + 0 + 16 + + + + + RPR + RPR + Repetition of period value + 0x30 + 0x20 + read-write + 0x0000 + + + RPR + Repetition of period value + 0 + 8 + + + + + C1DT + C1DT + Channel 1 data register + 0x34 + 0x20 + read-write + 0x00000000 + + + C1DT + Channel 1 data register + 0 + 16 + + + + + C2DT + C2DT + Channel 2 data register + 0x38 + 0x20 + read-write + 0x00000000 + + + C2DT + Channel 2 data register + 0 + 16 + + + + + C3DT + C3DT + Channel 3 data register + 0x3C + 0x20 + read-write + 0x00000000 + + + C3DT + Channel 3 data register + 0 + 16 + + + + + C4DT + C4DT + Channel 4 data register + 0x40 + 0x20 + read-write + 0x00000000 + + + C4DT + Channel 4 data register + 0 + 16 + + + + + BRK + BRK + Brake register + 0x44 + 0x20 + read-write + 0x0000 + + + OEN + Output enable + 15 + 1 + + + AOEN + Automatic output enable + 14 + 1 + + + BRKV + Brake input validity + 13 + 1 + + + BRKEN + Brake enable + 12 + 1 + + + FCSOEN + Frozen channel status when + holistic output enable + 11 + 1 + + + FCSODIS + Frozen channel status when + holistic output disable + 10 + 1 + + + WPC + Write protected configuration + 8 + 2 + + + DTC + Dead-time configuration + 0 + 8 + + + + + DMACTRL + DMACTRL + DMA control register + 0x48 + 0x20 + read-write + 0x0000 + + + DTB + DMA transfer bytes + 8 + 5 + + + ADDR + DMA transfer address offset + 0 + 5 + + + + + DMADT + DMADT + DMA data register + 0x4C + 0x20 + read-write + 0x0000 + + + DMADT + DMA data register + 0 + 16 + + + + + CM3_OUTPUT + CM3_OUTPUT + Channel output mode register + 0x70 + 0x20 + read-write + 0x00000000 + + + C5OSEN + Channel 5 output switch enable + 7 + 1 + + + C5OCTRL + Channel 5 output control + 4 + 3 + + + C5OBEN + Channel 5 output buffer enable + 3 + 1 + + + C5OIEN + Channel 5 output immediately enable + 2 + 1 + + + + + C5DT + C5DT + Channel 5 data register + 0x74 + 0x20 + read-write + 0x00000000 + + + C5DT + Channel 5 data register + 0 + 16 + + + + + + + TMR8 + 0x40010400 + + TMR8_BRK_TMR12 + TMR8 brake interrupt and TMR12 global + interrupt + 43 + + + TMR8_OVF_TMR13 + TMR8 overflow interrupt and TMR13 global + interrupt + 44 + + + TMR8_TRG_HALL_TMR14 + TMR8 trigger and HALL interrupts and + TMR14 global interrupt + 45 + + + TMR8_CH + TMR8 channel interrupt + 46 + + + + TMR20 + 0x40014C00 + + TMR20_BRK + TMR20 brake interrupt + 104 + + + TMR20_OVF + TMR20 overflow interrupt + 105 + + + TMR20_TRG_HALL + TMR20 trigger and HALL interrupts + 106 + + + TMR20_CH + TMR20 channel interrupt + 107 + + + + TMR2 + General purpose timer + TIMER + 0x40000000 + + 0x0 + 0x400 + registers + + + TMR2 + TMR2 global interrupt + 28 + + + + CTRL1 + CTRL1 + Control register 1 + 0x0 + 0x20 + read-write + 0x0000 + + + PMEN + Plus Mode Enable + 10 + 1 + + + CLKDIV + Clock divider + 8 + 2 + + + PRBEN + Period buffer enable + 7 + 1 + + + TWCMSEL + Two-way count mode + selection + 5 + 2 + + + OWCDIR + One-way count direction + 4 + 1 + + + OCMEN + One cycle mode enable + 3 + 1 + + + OVFS + Overflow event source + 2 + 1 + + + OVFEN + Overflow event enable + 1 + 1 + + + TMREN + TMR enable + 0 + 1 + + + + + CTRL2 + CTRL2 + Control register 2 + 0x4 + 0x20 + read-write + 0x0000 + + + C1INSEL + C1IN selection + 7 + 1 + + + PTOS + Primary TMR output selection + 4 + 3 + + + DRS + DMA request source + 3 + 1 + + + + + STCTRL + STCTRL + Subordinate TMR control register + 0x8 + 0x20 + read-write + 0x0000 + + + ESP + External signal polarity + 15 + 1 + + + ECMBEN + External clock mode B enable + 14 + 1 + + + ESDIV + External signal divider + 12 + 2 + + + ESF + External signal filter + 8 + 4 + + + STS + Subordinate TMR synchronization + 7 + 1 + + + STIS + Subordinate TMR input selection + 4 + 3 + + + SMSEL + Subordinate TMR mode selection + 0 + 3 + + + + + IDEN + IDEN + Interrupt/DMA enable register + 0xC + 0x20 + read-write + 0x0000 + + + TDEN + Trigger DMA request enable + 14 + 1 + + + C4DEN + Channel 4 DMA request + enable + 12 + 1 + + + C3DEN + Channel 3 DMA request + enable + 11 + 1 + + + C2DEN + Channel 2 DMA request + enable + 10 + 1 + + + C1DEN + Channel 1 DMA request + enable + 9 + 1 + + + OVFDEN + Overflow DMA request enable + 8 + 1 + + + TIEN + Trigger interrupt enable + 6 + 1 + + + C4IEN + Channel 4 interrupt + enable + 4 + 1 + + + C3IEN + Channel 3 interrupt + enable + 3 + 1 + + + C2IEN + Channel 2 interrupt + enable + 2 + 1 + + + C1IEN + Channel 1 interrupt + enable + 1 + 1 + + + OVFIEN + Overflow interrupt enable + 0 + 1 + + + + + ISTS + ISTS + Interrupt status register + 0x10 + 0x20 + read-write + 0x0000 + + + C4RF + Channel 4 recapture flag + 12 + 1 + + + C3RF + Channel 3 recapture flag + 11 + 1 + + + C2RF + Channel 2 recapture flag + 10 + 1 + + + C1RF + Channel 1 recapture flag + 9 + 1 + + + TRGIF + Trigger interrupt flag + 6 + 1 + + + C4IF + Channel 4 interrupt flag + 4 + 1 + + + C3IF + Channel 3 interrupt flag + 3 + 1 + + + C2IF + Channel 2 interrupt flag + 2 + 1 + + + C1IF + Channel 1 interrupt flag + 1 + 1 + + + OVFIF + Overflow interrupt flag + 0 + 1 + + + + + SWEVT + SWEVT + Software event register + 0x14 + 0x20 + read-write + 0x0000 + + + TRGSWTR + Trigger event triggered by software + 6 + 1 + + + C4SWTR + Channel 4 event triggered by software + 4 + 1 + + + C3SWTR + Channel 3 event triggered by software + 3 + 1 + + + C2SWTR + Channel 2 event triggered by software + 2 + 1 + + + C1SWTR + Channel 1 event triggered by software + 1 + 1 + + + OVFSWTR + Overflow event triggered by software + 0 + 1 + + + + + CM1_OUTPUT + CM1_OUTPUT + Channel output mode register + 0x18 + 0x20 + read-write + 0x00000000 + + + C2OSEN + Channel 2 output switch enable + 15 + 1 + + + C2OCTRL + Channel 2 output control + 12 + 3 + + + C2OBEN + Channel 2 output buffer enable + 11 + 1 + + + C2OIEN + Channel 2 output immediately enable + 10 + 1 + + + C2C + Channel 2 configure + 8 + 2 + + + C1OSEN + Channel 1 output switch enable + 7 + 1 + + + C1OCTRL + Channel 1 output control + 4 + 3 + + + C1OBEN + Channel 1 output buffer enable + 3 + 1 + + + C1OIEN + Channel 1 output immediately enable + 2 + 1 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM1_INPUT + CM1_INPUT + Channel input mode register 1 + CM1_OUTPUT + 0x18 + 0x20 + read-write + 0x00000000 + + + C2DF + Channel 2 digital filter + 12 + 4 + + + C2IDIV + Channel 2 input divider + 10 + 2 + + + C2C + Channel 2 configure + 8 + 2 + + + C1DF + Channel 1 digital filter + 4 + 4 + + + C1IDIV + Channel 1 input divider + 2 + 2 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM2_OUTPUT + CM2_OUTPUT + Channel output mode register 2 + 0x1C + 0x20 + read-write + 0x00000000 + + + C4OSEN + Channel 4 output switch enable + 15 + 1 + + + C4OCTRL + Channel 4 output control + 12 + 3 + + + C4OBEN + Channel 4 output buffer enable + 11 + 1 + + + C4OIEN + Channel 4 output immediately enable + 10 + 1 + + + C4C + Channel 4 configure + 8 + 2 + + + C3OSEN + Channel 3 output switch enable + 7 + 1 + + + C3OCTRL + Channel 3 output control + 4 + 3 + + + C3OBEN + Channel 3 output buffer enable + 3 + 1 + + + C3OIEN + Channel 3 output immediately enable + 2 + 1 + + + C3C + Channel 3 configure + 0 + 2 + + + + + CM2_INPUT + CM2_INPUT + Channel input mode register 2 + CM2_OUTPUT + 0x1C + 0x20 + read-write + 0x00000000 + + + C4DF + Channel 4 digital filter + 12 + 4 + + + C4IDIV + Channel 4 input divider + 10 + 2 + + + C4C + Channel 4 configure + 8 + 2 + + + C3DF + Channel 3 digital filter + 4 + 4 + + + C3IDIV + Channel 3 input divider + 2 + 2 + + + C3C + Channel 3 configure + 0 + 2 + + + + + CCTRL + CCTRL + Channel control + register + 0x20 + 0x20 + read-write + 0x0000 + + + C4P + Channel 4 Polarity + 13 + 1 + + + C4EN + Channel 4 enable + 12 + 1 + + + C3P + Channel 3 Polarity + 9 + 1 + + + C3EN + Channel 3 enable + 8 + 1 + + + C2P + Channel 2 Polarity + 5 + 1 + + + C2EN + Channel 2 enable + 4 + 1 + + + C1P + Channel 1 Polarity + 1 + 1 + + + C1EN + Channel 1 enable + 0 + 1 + + + + + CVAL + CVAL + Counter value + 0x24 + 0x20 + read-write + 0x00000000 + + + CVAL + Counter value + 0 + 32 + + + + + DIV + DIV + Divider value + 0x28 + 0x20 + read-write + 0x0000 + + + DIV + Divider value + 0 + 16 + + + + + PR + PR + Period value + 0x2C + 0x20 + read-write + 0x00000000 + + + PR + Period value + 0 + 32 + + + + + C1DT + C1DT + Channel 1 data register + 0x34 + 0x20 + read-write + 0x00000000 + + + C1DT + Channel 1 data register + 0 + 32 + + + + + C2DT + C2DT + Channel 2 data register + 0x38 + 0x20 + read-write + 0x00000000 + + + C2DT + Channel 2 data register + 0 + 32 + + + + + C3DT + C3DT + Channel 3 data register + 0x3C + 0x20 + read-write + 0x00000000 + + + C3DT + Channel 3 data register + 0 + 32 + + + + + C4DT + C4DT + Channel 4 data register + 0x40 + 0x20 + read-write + 0x00000000 + + + C4DT + Channel 4 data register + 0 + 32 + + + + + DMACTRL + DMACTRL + DMA control register + 0x48 + 0x20 + read-write + 0x0000 + + + DTB + DMA transfer bytes + 8 + 5 + + + ADDR + DMA transfer address offset + 0 + 5 + + + + + DMADT + DMADT + DMA data register + 0x4C + 0x20 + read-write + 0x0000 + + + DMADT + DMA data register + 0 + 16 + + + + + TMR2_RMP + TMR2_RMP + TMR2 channel input remap register + 0x50 + 0x20 + read-write + 0x0000 + + + TMR2_CH1_IRMP + TMR2 channel 1 input remap + 10 + 2 + + + + + + + TMR3 + General purpose timer + TIMER + 0x40000400 + + 0x0 + 0x400 + registers + + + TMR3 + TMR3 global interrupt + 29 + + + + CTRL1 + CTRL1 + Control register 1 + 0x0 + 0x20 + read-write + 0x0000 + + + CLKDIV + Clock divider + 8 + 2 + + + PRBEN + Period buffer enable + 7 + 1 + + + TWCMSEL + Two-way count mode + selection + 5 + 2 + + + OWCDIR + One-way count direction + 4 + 1 + + + OCMEN + One cycle mode enable + 3 + 1 + + + OVFS + Overflow event source + 2 + 1 + + + OVFEN + Overflow event enable + 1 + 1 + + + TMREN + TMR enable + 0 + 1 + + + + + CTRL2 + CTRL2 + Control register 2 + 0x4 + 0x20 + read-write + 0x0000 + + + C1INSEL + C1IN selection + 7 + 1 + + + PTOS + Primary TMR output selection + 4 + 3 + + + DRS + DMA request source + 3 + 1 + + + + + STCTRL + STCTRL + Subordinate TMR control register + 0x8 + 0x20 + read-write + 0x0000 + + + ESP + External signal polarity + 15 + 1 + + + ECMBEN + External clock mode B enable + 14 + 1 + + + ESDIV + External signal divider + 12 + 2 + + + ESF + External signal filter + 8 + 4 + + + STS + Subordinate TMR synchronization + 7 + 1 + + + STIS + Subordinate TMR input selection + 4 + 3 + + + SMSEL + Subordinate TMR mode selection + 0 + 3 + + + + + IDEN + IDEN + Interrupt/DMA enable register + 0xC + 0x20 + read-write + 0x0000 + + + TDEN + Trigger DMA request enable + 14 + 1 + + + C4DEN + Channel 4 DMA request + enable + 12 + 1 + + + C3DEN + Channel 3 DMA request + enable + 11 + 1 + + + C2DEN + Channel 2 DMA request + enable + 10 + 1 + + + C1DEN + Channel 1 DMA request + enable + 9 + 1 + + + OVFDEN + Overflow DMA request enable + 8 + 1 + + + TIEN + Trigger interrupt enable + 6 + 1 + + + C4IEN + Channel 4 interrupt + enable + 4 + 1 + + + C3IEN + Channel 3 interrupt + enable + 3 + 1 + + + C2IEN + Channel 2 interrupt + enable + 2 + 1 + + + C1IEN + Channel 1 interrupt + enable + 1 + 1 + + + OVFIEN + Overflow interrupt enable + 0 + 1 + + + + + ISTS + ISTS + Interrupt status register + 0x10 + 0x20 + read-write + 0x0000 + + + C4RF + Channel 4 recapture flag + 12 + 1 + + + C3RF + Channel 3 recapture flag + 11 + 1 + + + C2RF + Channel 2 recapture flag + 10 + 1 + + + C1RF + Channel 1 recapture flag + 9 + 1 + + + TRGIF + Trigger interrupt flag + 6 + 1 + + + C4IF + Channel 4 interrupt flag + 4 + 1 + + + C3IF + Channel 3 interrupt flag + 3 + 1 + + + C2IF + Channel 2 interrupt flag + 2 + 1 + + + C1IF + Channel 1 interrupt flag + 1 + 1 + + + OVFIF + Overflow interrupt flag + 0 + 1 + + + + + SWEVT + SWEVT + Software event register + 0x14 + 0x20 + read-write + 0x0000 + + + TRGSWTR + Trigger event triggered by software + 6 + 1 + + + C4SWTR + Channel 4 event triggered by software + 4 + 1 + + + C3SWTR + Channel 3 event triggered by software + 3 + 1 + + + C2SWTR + Channel 2 event triggered by software + 2 + 1 + + + C1SWTR + Channel 1 event triggered by software + 1 + 1 + + + OVFSWTR + Overflow event triggered by software + 0 + 1 + + + + + CM1_OUTPUT + CM1_OUTPUT + Channel output mode register + 0x18 + 0x20 + read-write + 0x00000000 + + + C2OSEN + Channel 2 output switch enable + 15 + 1 + + + C2OCTRL + Channel 2 output control + 12 + 3 + + + C2OBEN + Channel 2 output buffer enable + 11 + 1 + + + C2OIEN + Channel 2 output immediately enable + 10 + 1 + + + C2C + Channel 2 configure + 8 + 2 + + + C1OSEN + Channel 1 output switch enable + 7 + 1 + + + C1OCTRL + Channel 1 output control + 4 + 3 + + + C1OBEN + Channel 1 output buffer enable + 3 + 1 + + + C1OIEN + Channel 1 output immediately enable + 2 + 1 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM1_INPUT + CM1_INPUT + Channel input mode register 1 + CM1_OUTPUT + 0x18 + 0x20 + read-write + 0x00000000 + + + C2DF + Channel 2 digital filter + 12 + 4 + + + C2IDIV + Channel 2 input divider + 10 + 2 + + + C2C + Channel 2 configure + 8 + 2 + + + C1DF + Channel 1 digital filter + 4 + 4 + + + C1IDIV + Channel 1 input divider + 2 + 2 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM2_OUTPUT + CM2_OUTPUT + Channel output mode register 2 + 0x1C + 0x20 + read-write + 0x00000000 + + + C4OSEN + Channel 4 output switch enable + 15 + 1 + + + C4OCTRL + Channel 4 output control + 12 + 3 + + + C4OBEN + Channel 4 output buffer enable + 11 + 1 + + + C4OIEN + Channel 4 output immediately enable + 10 + 1 + + + C4C + Channel 4 configure + 8 + 2 + + + C3OSEN + Channel 3 output switch enable + 7 + 1 + + + C3OCTRL + Channel 3 output control + 4 + 3 + + + C3OBEN + Channel 3 output buffer enable + 3 + 1 + + + C3OIEN + Channel 3 output immediately enable + 2 + 1 + + + C3C + Channel 3 configure + 0 + 2 + + + + + CM2_INPUT + CM2_INPUT + Channel input mode register 2 + CM2_OUTPUT + 0x1C + 0x20 + read-write + 0x00000000 + + + C4DF + Channel 4 digital filter + 12 + 4 + + + C4IDIV + Channel 4 input divider + 10 + 2 + + + C4C + Channel 4 configure + 8 + 2 + + + C3DF + Channel 3 digital filter + 4 + 4 + + + C3IDIV + Channel 3 input divider + 2 + 2 + + + C3C + Channel 3 configure + 0 + 2 + + + + + CCTRL + CCTRL + Channel control + register + 0x20 + 0x20 + read-write + 0x0000 + + + C4P + Channel 4 Polarity + 13 + 1 + + + C4EN + Channel 4 enable + 12 + 1 + + + C3P + Channel 3 Polarity + 9 + 1 + + + C3EN + Channel 3 enable + 8 + 1 + + + C2P + Channel 2 Polarity + 5 + 1 + + + C2EN + Channel 2 enable + 4 + 1 + + + C1P + Channel 1 Polarity + 1 + 1 + + + C1EN + Channel 1 enable + 0 + 1 + + + + + CVAL + CVAL + Counter value + 0x24 + 0x20 + read-write + 0x00000000 + + + CVAL + Counter value + 0 + 16 + + + + + DIV + DIV + Divider value + 0x28 + 0x20 + read-write + 0x0000 + + + DIV + Divider value + 0 + 16 + + + + + PR + PR + Period value + 0x2C + 0x20 + read-write + 0x00000000 + + + PR + Period value + 0 + 16 + + + + + C1DT + C1DT + Channel 1 data register + 0x34 + 0x20 + read-write + 0x00000000 + + + C1DT + Channel 1 data register + 0 + 16 + + + + + C2DT + C2DT + Channel 2 data register + 0x38 + 0x20 + read-write + 0x00000000 + + + C2DT + Channel 2 data register + 0 + 16 + + + + + C3DT + C3DT + Channel 3 data register + 0x3C + 0x20 + read-write + 0x00000000 + + + C3DT + Channel 3 data register + 0 + 16 + + + + + C4DT + C4DT + Channel 4 data register + 0x40 + 0x20 + read-write + 0x00000000 + + + C4DT + Channel 4 data register + 0 + 16 + + + + + DMACTRL + DMACTRL + DMA control register + 0x48 + 0x20 + read-write + 0x0000 + + + DTB + DMA transfer bytes + 8 + 5 + + + ADDR + DMA transfer address offset + 0 + 5 + + + + + DMADT + DMADT + DMA data register + 0x4C + 0x20 + read-write + 0x0000 + + + DMADT + DMA data register + 0 + 16 + + + + + + + TMR4 + 0x40000800 + + TMR4 + TMR4 global interrupt + 30 + + + + TMR5 + General purpose timer + TIMER + 0x40000C00 + + 0x0 + 0x400 + registers + + + TMR5 + TMR5 global interrupt + 50 + + + + CTRL1 + CTRL1 + Control register 1 + 0x0 + 0x20 + read-write + 0x0000 + + + PMEN + Plus Mode Enable + 10 + 1 + + + CLKDIV + Clock divider + 8 + 2 + + + PRBEN + Period buffer enable + 7 + 1 + + + TWCMSEL + Two-way count mode + selection + 5 + 2 + + + OWCDIR + One-way count direction + 4 + 1 + + + OCMEN + One cycle mode enable + 3 + 1 + + + OVFS + Overflow event source + 2 + 1 + + + OVFEN + Overflow event enable + 1 + 1 + + + TMREN + TMR enable + 0 + 1 + + + + + CTRL2 + CTRL2 + Control register 2 + 0x4 + 0x20 + read-write + 0x0000 + + + C1INSEL + C1IN selection + 7 + 1 + + + PTOS + Primary TMR output selection + 4 + 3 + + + DRS + DMA request source + 3 + 1 + + + + + STCTRL + STCTRL + Subordinate TMR control register + 0x8 + 0x20 + read-write + 0x0000 + + + ESP + External signal polarity + 15 + 1 + + + ECMBEN + External clock mode B enable + 14 + 1 + + + ESDIV + External signal divider + 12 + 2 + + + ESF + External signal filter + 8 + 4 + + + STS + Subordinate TMR synchronization + 7 + 1 + + + STIS + Subordinate TMR input selection + 4 + 3 + + + SMSEL + Subordinate TMR mode selection + 0 + 3 + + + + + IDEN + IDEN + Interrupt/DMA enable register + 0xC + 0x20 + read-write + 0x0000 + + + TDEN + Trigger DMA request enable + 14 + 1 + + + C4DEN + Channel 4 DMA request + enable + 12 + 1 + + + C3DEN + Channel 3 DMA request + enable + 11 + 1 + + + C2DEN + Channel 2 DMA request + enable + 10 + 1 + + + C1DEN + Channel 1 DMA request + enable + 9 + 1 + + + OVFDEN + Overflow DMA request enable + 8 + 1 + + + TIEN + Trigger interrupt enable + 6 + 1 + + + C4IEN + Channel 4 interrupt + enable + 4 + 1 + + + C3IEN + Channel 3 interrupt + enable + 3 + 1 + + + C2IEN + Channel 2 interrupt + enable + 2 + 1 + + + C1IEN + Channel 1 interrupt + enable + 1 + 1 + + + OVFIEN + Overflow interrupt enable + 0 + 1 + + + + + ISTS + ISTS + Interrupt status register + 0x10 + 0x20 + read-write + 0x0000 + + + C4RF + Channel 4 recapture flag + 12 + 1 + + + C3RF + Channel 3 recapture flag + 11 + 1 + + + C2RF + Channel 2 recapture flag + 10 + 1 + + + C1RF + Channel 1 recapture flag + 9 + 1 + + + TRGIF + Trigger interrupt flag + 6 + 1 + + + C4IF + Channel 4 interrupt flag + 4 + 1 + + + C3IF + Channel 3 interrupt flag + 3 + 1 + + + C2IF + Channel 2 interrupt flag + 2 + 1 + + + C1IF + Channel 1 interrupt flag + 1 + 1 + + + OVFIF + Overflow interrupt flag + 0 + 1 + + + + + SWEVT + SWEVT + Software event register + 0x14 + 0x20 + read-write + 0x0000 + + + TRGSWTR + Trigger event triggered by software + 6 + 1 + + + C4SWTR + Channel 4 event triggered by software + 4 + 1 + + + C3SWTR + Channel 3 event triggered by software + 3 + 1 + + + C2SWTR + Channel 2 event triggered by software + 2 + 1 + + + C1SWTR + Channel 1 event triggered by software + 1 + 1 + + + OVFSWTR + Overflow event triggered by software + 0 + 1 + + + + + CM1_OUTPUT + CM1_OUTPUT + Channel output mode register + 0x18 + 0x20 + read-write + 0x00000000 + + + C2OSEN + Channel 2 output switch enable + 15 + 1 + + + C2OCTRL + Channel 2 output control + 12 + 3 + + + C2OBEN + Channel 2 output buffer enable + 11 + 1 + + + C2OIEN + Channel 2 output immediately enable + 10 + 1 + + + C2C + Channel 2 configure + 8 + 2 + + + C1OSEN + Channel 1 output switch enable + 7 + 1 + + + C1OCTRL + Channel 1 output control + 4 + 3 + + + C1OBEN + Channel 1 output buffer enable + 3 + 1 + + + C1OIEN + Channel 1 output immediately enable + 2 + 1 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM1_INPUT + CM1_INPUT + Channel input mode register 1 + CM1_OUTPUT + 0x18 + 0x20 + read-write + 0x00000000 + + + C2DF + Channel 2 digital filter + 12 + 4 + + + C2IDIV + Channel 2 input divider + 10 + 2 + + + C2C + Channel 2 configure + 8 + 2 + + + C1DF + Channel 1 digital filter + 4 + 4 + + + C1IDIV + Channel 1 input divider + 2 + 2 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM2_OUTPUT + CM2_OUTPUT + Channel output mode register 2 + 0x1C + 0x20 + read-write + 0x00000000 + + + C4OSEN + Channel 4 output switch enable + 15 + 1 + + + C4OCTRL + Channel 4 output control + 12 + 3 + + + C4OBEN + Channel 4 output buffer enable + 11 + 1 + + + C4OIEN + Channel 4 output immediately enable + 10 + 1 + + + C4C + Channel 4 configure + 8 + 2 + + + C3OSEN + Channel 3 output switch enable + 7 + 1 + + + C3OCTRL + Channel 3 output control + 4 + 3 + + + C3OBEN + Channel 3 output buffer enable + 3 + 1 + + + C3OIEN + Channel 3 output immediately enable + 2 + 1 + + + C3C + Channel 3 configure + 0 + 2 + + + + + CM2_INPUT + CM2_INPUT + Channel input mode register 2 + CM2_OUTPUT + 0x1C + 0x20 + read-write + 0x00000000 + + + C4DF + Channel 4 digital filter + 12 + 4 + + + C4IDIV + Channel 4 input divider + 10 + 2 + + + C4C + Channel 4 configure + 8 + 2 + + + C3DF + Channel 3 digital filter + 4 + 4 + + + C3IDIV + Channel 3 input divider + 2 + 2 + + + C3C + Channel 3 configure + 0 + 2 + + + + + CCTRL + CCTRL + Channel control + register + 0x20 + 0x20 + read-write + 0x0000 + + + C4P + Channel 4 Polarity + 13 + 1 + + + C4EN + Channel 4 enable + 12 + 1 + + + C3P + Channel 3 Polarity + 9 + 1 + + + C3EN + Channel 3 enable + 8 + 1 + + + C2P + Channel 2 Polarity + 5 + 1 + + + C2EN + Channel 2 enable + 4 + 1 + + + C1P + Channel 1 Polarity + 1 + 1 + + + C1EN + Channel 1 enable + 0 + 1 + + + + + CVAL + CVAL + Counter value + 0x24 + 0x20 + read-write + 0x00000000 + + + CVAL + Counter value + 0 + 32 + + + + + DIV + DIV + Divider value + 0x28 + 0x20 + read-write + 0x0000 + + + DIV + Divider value + 0 + 16 + + + + + PR + PR + Period value + 0x2C + 0x20 + read-write + 0x00000000 + + + PR + Period value + 0 + 32 + + + + + C1DT + C1DT + Channel 1 data register + 0x34 + 0x20 + read-write + 0x00000000 + + + C1DT + Channel 1 data register + 0 + 32 + + + + + C2DT + C2DT + Channel 2 data register + 0x38 + 0x20 + read-write + 0x00000000 + + + C2DT + Channel 2 data register + 0 + 32 + + + + + C3DT + C3DT + Channel 3 data register + 0x3C + 0x20 + read-write + 0x00000000 + + + C3DT + Channel 3 data register + 0 + 32 + + + + + C4DT + C4DT + Channel 4 data register + 0x40 + 0x20 + read-write + 0x00000000 + + + C4DT + Channel 4 data register + 0 + 32 + + + + + DMACTRL + DMACTRL + DMA control register + 0x48 + 0x20 + read-write + 0x0000 + + + DTB + DMA transfer bytes + 8 + 5 + + + ADDR + DMA transfer address offset + 0 + 5 + + + + + DMADT + DMADT + DMA data register + 0x4C + 0x20 + read-write + 0x0000 + + + DMADT + DMA data register + 0 + 16 + + + + + TMR5_RMP + TMR5_RMP + TMR5 channel input remap register + 0x50 + 0x20 + read-write + 0x0000 + + + TMR5_CH4_IRMP + TMR5 channel 4 input remap + 6 + 2 + + + + + + + TMR9 + General purpose timer + TIMER + 0x40014000 + + 0x0 + 0x400 + registers + + + TMR1_BRK_TMR9 + TMR1 brake interrupt and TMR9 global + interrupt + 24 + + + + CTRL1 + CTRL1 + Control register 1 + 0x0 + 0x20 + read-write + 0x0000 + + + CLKDIV + Clock divider + 8 + 2 + + + PRBEN + Period buffer enable + 7 + 1 + + + OCMEN + One cycle mode enable + 3 + 1 + + + OVFS + Overflow event source + 2 + 1 + + + OVFEN + Overflow event enable + 1 + 1 + + + TMREN + TMR enable + 0 + 1 + + + + + STCTRL + STCTRL + Subordinate TMR control register + 0x8 + 0x20 + read-write + 0x0000 + + + STIS + Subordinate TMR input selection + 4 + 3 + + + SMSEL + Subordinate TMR mode selection + 0 + 3 + + + + + IDEN + IDEN + Interrupt/DMA enable register + 0xC + 0x20 + read-write + 0x0000 + + + TIEN + Trigger interrupt enable + 6 + 1 + + + C2IEN + Channel 2 interrupt + enable + 2 + 1 + + + C1IEN + Channel 1 interrupt + enable + 1 + 1 + + + OVFIEN + Overflow interrupt enable + 0 + 1 + + + + + ISTS + ISTS + Interrupt status register + 0x10 + 0x20 + read-write + 0x0000 + + + C2RF + Channel 2 recapture flag + 10 + 1 + + + C1RF + Channel 1 recapture flag + 9 + 1 + + + TRGIF + Trigger interrupt flag + 6 + 1 + + + C2IF + Channel 2 interrupt flag + 2 + 1 + + + C1IF + Channel 1 interrupt flag + 1 + 1 + + + OVFIF + Overflow interrupt flag + 0 + 1 + + + + + SWEVT + SWEVT + Software event register + 0x14 + 0x20 + read-write + 0x0000 + + + TRGSWTR + Trigger event triggered by software + 6 + 1 + + + C2SWTR + Channel 2 event triggered by software + 2 + 1 + + + C1SWTR + Channel 1 event triggered by software + 1 + 1 + + + OVFSWTR + Overflow event triggered by software + 0 + 1 + + + + + CM1_OUTPUT + CM1_OUTPUT + Channel output mode register + 0x18 + 0x20 + read-write + 0x00000000 + + + C2OCTRL + Channel 2 output control + 12 + 3 + + + C2OBEN + Channel 2 output buffer enable + 11 + 1 + + + C2OIEN + Channel 2 output immediately enable + 10 + 1 + + + C2C + Channel 2 configure + 8 + 2 + + + C1OCTRL + Channel 1 output control + 4 + 3 + + + C1OBEN + Channel 1 output buffer enable + 3 + 1 + + + C1OIEN + Channel 1 output immediately enable + 2 + 1 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM1_INPUT + CM1_INPUT + Channel input mode register 1 + CM1_OUTPUT + 0x18 + 0x20 + read-write + 0x00000000 + + + C2DF + Channel 2 digital filter + 12 + 4 + + + C2IDIV + Channel 2 input divider + 10 + 2 + + + C2C + Channel 2 configure + 8 + 2 + + + C1DF + Channel 1 digital filter + 4 + 4 + + + C1IDIV + Channel 1 input divider + 2 + 2 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CCTRL + CCTRL + Channel control + register + 0x20 + 0x20 + read-write + 0x0000 + + + C2CP + Channel 2 complementary polarity + 7 + 1 + + + C2CEN + Channel 2 complementary enable + 6 + 1 + + + C2P + Channel 2 Polarity + 5 + 1 + + + C2EN + Channel 2 enable + 4 + 1 + + + C1CP + Channel 1 complementary polarity + 3 + 1 + + + C1CEN + Channel 1 complementary enable + 2 + 1 + + + C1P + Channel 1 Polarity + 1 + 1 + + + C1EN + Channel 1 enable + 0 + 1 + + + + + CVAL + CVAL + Counter value + 0x24 + 0x20 + read-write + 0x00000000 + + + CVAL + Counter value + 0 + 16 + + + + + DIV + DIV + Divider value + 0x28 + 0x20 + read-write + 0x0000 + + + DIV + Divider value + 0 + 16 + + + + + PR + PR + Period value + 0x2C + 0x20 + read-write + 0x00000000 + + + PR + Period value + 0 + 16 + + + + + C1DT + C1DT + Channel 1 data register + 0x34 + 0x20 + read-write + 0x00000000 + + + C1DT + Channel 1 data register + 0 + 16 + + + + + C2DT + C2DT + Channel 2 data register + 0x38 + 0x20 + read-write + 0x00000000 + + + C2DT + Channel 2 data register + 0 + 16 + + + + + + + TMR12 + 0x40001800 + + TMR8_BRK_TMR12 + TMR8 brake interrupt and TMR12 global + interrupt + 43 + + + + TMR10 + General purpose timer + TIMER + 0x40014400 + + 0x0 + 0x400 + registers + + + TMR1_OVF_TMR10 + TMR1 overflow interrupt and TMR10 global + interrupt + 25 + + + + CTRL1 + CTRL1 + Control register 1 + 0x0 + 0x20 + read-write + 0x0000 + + + CLKDIV + Clock divider + 8 + 2 + + + PRBEN + Period buffer enable + 7 + 1 + + + OCMEN + One cycle mode enable + 3 + 1 + + + OVFS + Overflow event source + 2 + 1 + + + OVFEN + Overflow event enable + 1 + 1 + + + TMREN + TMR enable + 0 + 1 + + + + + IDEN + IDEN + Interrupt/DMA enable register + 0xC + 0x20 + read-write + 0x0000 + + + C1IEN + Channel 1 interrupt + enable + 1 + 1 + + + OVFIEN + Overflow interrupt enable + 0 + 1 + + + + + ISTS + ISTS + Interrupt status register + 0x10 + 0x20 + read-write + 0x0000 + + + C1RF + Channel 1 recapture flag + 9 + 1 + + + C1IF + Channel 1 interrupt flag + 1 + 1 + + + OVFIF + Overflow interrupt flag + 0 + 1 + + + + + SWEVT + SWEVT + Software event register + 0x14 + 0x20 + read-write + 0x0000 + + + C1SWTR + Channel 1 event triggered by software + 1 + 1 + + + OVFSWTR + Overflow event triggered by software + 0 + 1 + + + + + CM1_OUTPUT + CM1_OUTPUT + Channel output mode register + 0x18 + 0x20 + read-write + 0x00000000 + + + C1OCTRL + Channel 1 output control + 4 + 3 + + + C1OBEN + Channel 1 output buffer enable + 3 + 1 + + + C1OIEN + Channel 1 output immediately enable + 2 + 1 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CM1_INPUT + CM1_INPUT + Channel input mode register 1 + CM1_OUTPUT + 0x18 + 0x20 + read-write + 0x00000000 + + + C1DF + Channel 1 digital filter + 4 + 4 + + + C1IDIV + Channel 1 input divider + 2 + 2 + + + C1C + Channel 1 configure + 0 + 2 + + + + + CCTRL + CCTRL + Channel control + register + 0x20 + 0x20 + read-write + 0x0000 + + + C1CP + Channel 1 complementary polarity + 3 + 1 + + + C1P + Channel 1 Polarity + 1 + 1 + + + C1EN + Channel 1 enable + 0 + 1 + + + + + CVAL + CVAL + Counter value + 0x24 + 0x20 + read-write + 0x00000000 + + + CVAL + Counter value + 0 + 16 + + + + + DIV + DIV + Divider value + 0x28 + 0x20 + read-write + 0x0000 + + + DIV + Divider value + 0 + 16 + + + + + PR + PR + Period value + 0x2C + 0x20 + read-write + 0x00000000 + + + PR + Period value + 0 + 16 + + + + + C1DT + C1DT + Channel 1 data register + 0x34 + 0x20 + read-write + 0x00000000 + + + C1DT + Channel 1 data register + 0 + 16 + + + + + + + TMR11 + 0x40014800 + + TMR1_TRG_HALL_TMR11 + TMR1 trigger and HALL interrupts and + TMR11 global interrupt + 26 + + + + TMR13 + 0x40001C00 + + TMR8_OVF_TMR13 + TMR8 overflow interrupt and TMR13 global + interrupt + 44 + + + + TMR14 + 0x40002000 + + TMR8_TRG_HALL_TMR14 + TMR8 trigger and HALL interrupts and + TMR14 global interrupt + 45 + + + + TMR6 + Basic timer + TIMER + 0x40001000 + + 0x0 + 0x400 + registers + + + TMR6 + TMR6 global interrupt + 54 + + + + CTRL1 + CTRL1 + Control register 1 + 0x0 + 0x20 + read-write + 0x0000 + + + PRBEN + Period buffer enable + 7 + 1 + + + OCMEN + One cycle mode enable + 3 + 1 + + + OVFS + Overflow event source + 2 + 1 + + + OVFEN + Overflow event enable + 1 + 1 + + + TMREN + TMR enable + 0 + 1 + + + + + CTRL2 + CTRL2 + Control register 2 + 0x4 + 0x20 + read-write + 0x0000 + + + PTOS + Primary TMR output selection + 4 + 3 + + + + + IDEN + IDEN + Interrupt/DMA enable register + 0xC + 0x20 + read-write + 0x0000 + + + OVFDEN + Overflow DMA request enable + 8 + 1 + + + OVFIEN + Overflow interrupt enable + 0 + 1 + + + + + ISTS + ISTS + Interrupt status register + 0x10 + 0x20 + read-write + 0x0000 + + + OVFIF + Overflow interrupt flag + 0 + 1 + + + + + SWEVT + SWEVT + Software event register + 0x14 + 0x20 + read-write + 0x0000 + + + OVFSWTR + Overflow event triggered by software + 0 + 1 + + + + + CVAL + CVAL + Counter value + 0x24 + 0x20 + read-write + 0x00000000 + + + CVAL + Counter value + 0 + 16 + + + + + DIV + DIV + Divider value + 0x28 + 0x20 + read-write + 0x0000 + + + DIV + Divider value + 0 + 16 + + + + + PR + PR + Period value + 0x2C + 0x20 + read-write + 0x00000000 + + + PR + Period value + 0 + 16 + + + + + + + TMR7 + 0x40001400 + + TMR7 + TMR7 global interrupt + 55 + + + + ACC + HSI Auto Clock Calibration + ACC + 0x40017400 + + 0x0 + 0x400 + registers + + + + STS + STS + status register + 0x0 + 0x20 + 0x0000 + + + RSLOST + Reference Signal Lost + read-write + 1 + 1 + + + CALRDY + Internal high-speed clock calibration ready + read-write + 0 + 1 + + + + + CTRL1 + CTRL1 + control register 1 + 0x04 + 0x20 + 0x0100 + + + STEP + STEP + read-write + 8 + 4 + + + CALRDYIEN + CALRDY interrupt enable + read-write + 5 + 1 + + + EIEN + RSLOST error interrupt enable + read-write + 4 + 1 + + + SOFSEL + SOF Select + read-write + 2 + 1 + + + ENTRIM + Enable trim + read-write + 1 + 1 + + + CALON + Calibration on + read-write + 0 + 1 + + + + + CTRL2 + CTRL2 + control register 2 + 0x08 + 0x20 + 0x2080 + + + HICKTWK + Internal high-speed auto clock trimming + read-only + 8 + 6 + + + HICKCAL + Internal high-speed auto clock calibration + read-only + 0 + 8 + + + + + C1 + C1 + compare value 1 + 0x0C + 0x20 + 0x1F2C + + + C1 + Compare 1 + read-write + 0 + 16 + + + + + C2 + C2 + compare value 2 + 0x10 + 0x20 + 0x1F40 + + + C2 + Compare 2 + read-write + 0 + 16 + + + + + C3 + C3 + compare value 3 + 0x14 + 0x20 + 0x1F54 + + + C3 + Compare 3 + read-write + 0 + 16 + + + + + + + I2C1 + Inter-integrated circuit + I2C + 0x40005400 + + 0x0 + 0x400 + registers + + + I2C1_EVT + I2C1 event interrupt + 31 + + + I2C1_ERR + I2C1 error interrupt + 32 + + + + CTRL1 + CTRL1 + Control register 1 + 0x0 + 0x20 + 0x00000000 + + + I2CEN + I2C peripheral enable + 0 + 1 + read-write + + + TDIEN + Transmit data interrupt enable + 1 + 1 + read-write + + + RDIEN + Receive data interrupt enable + 2 + 1 + read-write + + + ADDRIEN + Address match interrupt enable + 3 + 1 + read-write + + + ACKFAILIEN + Acknowledge fail interrupt enable + 4 + 1 + read-write + + + STOPIEN + Stop generation complete interrupt enable + 5 + 1 + read-write + + + TDCIEN + Transfer data complete interrupt enable + 6 + 1 + read-write + + + ERRIEN + Error interrupts enable + 7 + 1 + read-write + + + DFLT + Digital filter value + 8 + 4 + read-write + + + DMATEN + DMA Transmit data request enable + 14 + 1 + read-write + + + DMAREN + DMA receive data request enable + 15 + 1 + read-write + + + SCTRL + Slave receiving data control + 16 + 1 + read-write + + + STRETCH + Clock stretching mode + 17 + 1 + read-write + + + GCAEN + General call address enable + 19 + 1 + read-write + + + HADDREN + SMBus host address enable + 20 + 1 + read-write + + + DEVADDREN + SMBus device default address enable + 21 + 1 + read-write + + + SMBALERT + SMBus alert enable / pin set + 22 + 1 + read-write + + + PECEN + PEC calculation enable + 23 + 1 + read-write + + + + + CTRL2 + CTRL2 + Control register 2 + 0x4 + 0x20 + read-write + 0x00000000 + + + PECTEN + Request PEC transmission enable + 26 + 1 + + + ASTOPEN + Automatically send stop condition enable + 25 + 1 + + + RLDEN + Send data reload mode enable + 24 + 1 + + + CNT + Transmit data counter + 16 + 8 + + + NACKEN + Not acknowledge enable + 15 + 1 + + + GENSTOP + Generate stop condition + 14 + 1 + + + GENSTART + Generate start condition + 13 + 1 + + + READH10 + 10-bit address header read enable + 12 + 1 + + + ADDR10 + Host send 10-bit address mode enable + 11 + 1 + + + DIR + Master data transmission direction + 10 + 1 + + + SADDR + Slave address + 0 + 10 + + + + + OADDR1 + OADDR1 + Own address register 1 + 0x8 + 0x20 + read-write + 0x00000000 + + + ADDR1 + Interface address + 0 + 10 + + + ADDR1MODE + Own Address mode + 10 + 1 + + + ADDR1EN + Own address 1 enable + 15 + 1 + + + + + OADDR2 + OADDR2 + Own address register 2 + 0xC + 0x20 + read-write + 0x00000000 + + + ADDR2 + Own address 2 + 1 + 7 + + + ADDR2MASK + Own address 2-bit mask + 8 + 3 + + + ADDR2EN + Own address 2 enable + 15 + 1 + + + + + CLKCTRL + CLKCTRL + Clock contorl register + 0x10 + 0x20 + read-write + 0x00000000 + + + SCLL + SCL low level + 0 + 8 + + + SCLH + SCL high level + 8 + 8 + + + SDAD + SDA output delay + 16 + 4 + + + SCLD + SCL output delay + 20 + 4 + + + DIVH + High 4 bits of clock divider value + 24 + 4 + + + DIVL + Low 4 bits of clock divider value + 28 + 4 + + + + + TIMEOUT + TIMEOUT + Timeout register + 0x14 + 0x20 + read-write + 0x00000000 + + + TOTIME + Clock timeout detection time + 0 + 12 + + + TOMOED + Clock timeout detection mode + 12 + 1 + + + TOEN + Detect clock low/high timeout enable + 15 + 1 + + + EXTTIME + Cumulative clock low extend timeout value + 16 + 12 + + + EXTEN + Cumulative clock low extend timeout enable + 31 + 1 + + + + + STS + STS + Interrupt and Status register + 0x18 + 0x20 + 0x00000001 + + + ADDR + Slave address matching value + 17 + 7 + read-only + + + SDIR + Slave data transmit direction + 16 + 1 + read-only + + + BUSYF + Bus busy + 15 + 1 + read-only + + + ALERTF + SMBus alert flag + 13 + 1 + read-only + + + TMOUT + SMBus timeout flag + 12 + 1 + read-only + + + PECERR + PEC receive error flag + 11 + 1 + read-only + + + OUF + Overflow or underflow flag + 10 + 1 + read-only + + + ARLOST + Arbitration lost flag + 9 + 1 + read-only + + + BUSERR + Bus error flag + 8 + 1 + read-only + + + TCRLD + Transmission is complete, waiting to load data + 7 + 1 + read-only + + + TDC + Transmit data complete flag + 6 + 1 + read-only + + + STOPF + Stop condition generation complete flag + 5 + 1 + read-only + + + ACKFAIL + Acknowledge failure flag + 4 + 1 + read-only + + + ADDRF + 0~7 bit address match flag + 3 + 1 + read-only + + + RDBF + Receive data buffer full flag + 2 + 1 + read-only + + + TDIS + Send interrupt status + 1 + 1 + read-write + + + TDBE + Transmit data buffer empty flag + 0 + 1 + read-write + + + + + CLR + CLR + Interrupt clear register + 0x1C + 0x20 + write-only + 0x00000000 + + + ALERTC + Clear SMBus alert flag + 13 + 1 + + + TMOUTC + Clear SMBus timeout flag + 12 + 1 + + + PECERRC + Clear PEC receive error flag + 11 + 1 + + + OUFC + Clear overload / underload flag + 10 + 1 + + + ARLOSTC + Clear arbitration lost flag + 9 + 1 + + + BUSERRC + Clear bus error flag + 8 + 1 + + + STOPC + Clear stop condition generation complete flag + 5 + 1 + + + ACKFAILC + Clear acknowledge failure flag + 4 + 1 + + + ADDRC + Clear 0~7 bit address match flag + 3 + 1 + + + + + PEC + PEC + PEC register + 0x20 + 0x20 + read-only + 0x00000000 + + + PECVAL + PEC value + 0 + 8 + + + + + RXDT + RXDT + Receive data register + 0x24 + 0x20 + read-only + 0x00000000 + + + DT + Receive data register + 0 + 8 + + + + + TXDT + TXDT + Transmit data register + 0x28 + 0x20 + read-write + 0x00000000 + + + DT + Transmit data register + 0 + 8 + + + + + + + I2C2 + 0x40005800 + + I2C2_EVT + I2C2 event interrupt + 33 + + + I2C2_ERR + I2C2 error interrupt + 34 + + + + I2C3 + 0x40005C00 + + I2C3_EVT + I2C3 event interrupt + 72 + + + I2C3_ERR + I2C3 error interrupt + 73 + + + + SPI1 + Serial peripheral interface + SPI + 0x40013000 + + 0x0 + 0x400 + registers + + + SPI1 + SPI1 global interrupt + 35 + + + + CTRL1 + CTRL1 + control register 1 + 0x0 + 0x20 + read-write + 0x0000 + + + SLBEN + Single line bidirectional half-duplex enable + 15 + 1 + + + SLBTD + Single line bidirectional half-duplex transmission direction + 14 + 1 + + + CCEN + CRC calculation enable + 13 + 1 + + + NTC + Next transmission CRC + 12 + 1 + + + FBN + frame bit num + 11 + 1 + + + ORA + Only receive active + 10 + 1 + + + SWCSEN + Software CS enable + 9 + 1 + + + SWCSIL + Software CS internal level + 8 + 1 + + + LTF + LSB transmit first + 7 + 1 + + + SPIEN + SPI enable + 6 + 1 + + + MDIV2_0 + Master clock frequency division bit2-0 + 3 + 3 + + + MSTEN + Master enable + 2 + 1 + + + CLKPOL + Clock polarity + 1 + 1 + + + CLKPHA + Clock phase + 0 + 1 + + + + + CTRL2 + CTRL2 + control register 2 + 0x4 + 0x20 + read-write + 0x0000 + + + MDIV3EN + Master clock frequency3 division enable + 9 + 1 + + + MDIV3 + Master clock frequency division bit3 + 8 + 1 + + + TDBEIE + Transmit data buffer empty interrupt enable + 7 + 1 + + + RDBFIE + Receive data buffer full interrupt enable + 6 + 1 + + + ERRIE + Error interrupt enable + 5 + 1 + + + TIEN + TI mode enable + 4 + 1 + + + HWCSOE + Hardware CS output enable + 2 + 1 + + + DMATEN + DMA transmit enable + 1 + 1 + + + DMAREN + DMA receive enable + 0 + 1 + + + + + STS + STS + status register + 0x8 + 0x20 + 0x0002 + + + CSPAS + CS pulse abnormal setting fiag + 8 + 1 + read-write + + + BF + Busy flag + 7 + 1 + read-only + + + ROERR + Receiver overflow error + 6 + 1 + read-only + + + MMERR + Master mode error + 5 + 1 + read-only + + + CCERR + CRC calculation error + 4 + 1 + read-write + + + TUERR + Transmitter underload error + 3 + 1 + read-only + + + ACS + Audio channel state + 2 + 1 + read-only + + + TDBE + Transmit data buffer empty + 1 + 1 + read-only + + + RDBF + Receive data buffer full + 0 + 1 + read-only + + + + + DT + DT + data register + 0xC + 0x20 + read-write + 0x0000 + + + DT + Data value + 0 + 16 + + + + + CPOLY + CPOLY + CRC polynomial register + 0x10 + 0x20 + read-write + 0x0007 + + + CPOLY + CRC polynomial + 0 + 16 + + + + + RCRC + RCRC + Receive CRC register + 0x14 + 0x20 + read-only + 0x0000 + + + RCRC + Receive CRC + 0 + 16 + + + + + TCRC + TCRC + Transmit CRC register + 0x18 + 0x20 + read-only + 0x0000 + + + TCRC + Transmit CRC + 0 + 16 + + + + + I2SCTRL + I2SCTRL + I2S control register + 0x1C + 0x20 + read-write + 0x0000 + + + I2SMSEL + I2S mode select + 11 + 1 + + + I2SEN + I2S Enable + 10 + 1 + + + OPERSEL + I2S operation select + 8 + 2 + + + PCMFSSEL + PCM frame synchronization select + 7 + 1 + + + STDSEL + I2S standard select + 4 + 2 + + + I2SCLKPOL + I2S clock polarity + 3 + 1 + + + I2SDBN + I2S data bit num + 1 + 2 + + + I2SCBN + I2S channel bit num + 0 + 1 + + + + + I2SCLK + I2SCLK + I2S clock register + 0x20 + 0x20 + read-write + 00000010 + + + I2SDIV9_8 + I2S division bit9 and bit8 + 10 + 2 + + + I2SMCLKOE + I2S master clock output enable + 9 + 1 + + + I2SODD + Odd result for I2S division + 8 + 1 + + + I2SDIV7_0 + I2S division bit7 to bit0 + 0 + 8 + + + + + + + SPI2 + 0x40003800 + + SPI2 + SPI2 global interrupt + 36 + + + + SPI3 + 0x40003C00 + + SPI3 + SPI3 global interrupt + 51 + + + + SPI4 + 0x40013400 + + SPI4 + SPI4 global interrupt + 84 + + + + I2S2_EXT + 0x40017800 + + + I2S3_EXT + 0x40017C00 + + + USART1 + Universal synchronous asynchronous receiver + transmitter + USART + 0x40011000 + + 0x0 + 0x400 + registers + + + USART1 + USART1 global interrupt + 37 + + + + STS + STS + Status register + 0x0 + 0x20 + 0x00C0 + + + CTSCF + CTS change flag + 9 + 1 + read-write + + + BFF + Break frame flag + 8 + 1 + read-write + + + TDBE + Transmit data buffer empty + 7 + 1 + read-only + + + TDC + Transmit data complete + 6 + 1 + read-write + + + RDBF + Receive data buffer full + 5 + 1 + read-write + + + IDLEF + IDLE flag + 4 + 1 + read-only + + + ROERR + Receiver overflow error + 3 + 1 + read-only + + + NERR + Noise error + 2 + 1 + read-only + + + FERR + Framing error + 1 + 1 + read-only + + + PERR + Parity error + 0 + 1 + read-only + + + + + DT + DT + Data register + 0x4 + 0x20 + read-write + 0x00000000 + + + DT + Data value + 0 + 9 + + + + + BAUDR + BAUDR + Baud rate register + 0x8 + 0x20 + read-write + 0x0000 + + + DIV + Division + 0 + 16 + + + + + CTRL1 + CTRL1 + Control register 1 + 0xC + 0x20 + read-write + 0x0000 + + + DBN1 + high bit for Data bit num + 28 + 1 + + + TSDT + transmit start delay time + 21 + 5 + + + TCDT + transmit complete delay time + 16 + 5 + + + UEN + USART enable + 13 + 1 + + + DBN0 + low bit for Data bit num + 12 + 1 + + + WUM + Wake up mode + 11 + 1 + + + PEN + Parity enable + 10 + 1 + + + PSEL + Parity selection + 9 + 1 + + + PERRIEN + PERR interrupt enable + 8 + 1 + + + TDBEIEN + TDBE interrupt enable + 7 + 1 + + + TDCIEN + TDC interrupt enable + 6 + 1 + + + RDBFIEN + RDBF interrupt enable + 5 + 1 + + + IDLEIEN + IDLE interrupt enable + 4 + 1 + + + TEN + Transmitter enable + 3 + 1 + + + REN + Receiver enable + 2 + 1 + + + RM + Receiver mute + 1 + 1 + + + SBF + Send break frame + 0 + 1 + + + + + CTRL2 + CTRL2 + Control register 2 + 0x10 + 0x20 + read-write + 0x0000 + + + ID7_4 + bit 7-4 for usart identification + 28 + 4 + + + TRPSWAP + Transmit receive pin swap + 15 + 1 + + + LINEN + LIN mode enable + 14 + 1 + + + STOPBN + STOP bit num + 12 + 2 + + + CLKEN + Clock enable + 11 + 1 + + + CLKPOL + Clock polarity + 10 + 1 + + + CLKPHA + Clock phase + 9 + 1 + + + LBCP + Last bit clock pulse + 8 + 1 + + + BFIEN + Break frame interrupt enable + 6 + 1 + + + BFBN + Break frame bit num + 5 + 1 + + + IDBN + Identification bit num + 4 + 1 + + + ID3_0 + bit 3-0 for usart identification + 0 + 4 + + + + + CTRL3 + CTRL3 + Control register 3 + 0x14 + 0x20 + read-write + 0x0000 + + + DEP + DE polarity selection + 15 + 1 + + + RS485EN + RS485 enable + 14 + 1 + + + CTSCFIEN + CTSCF interrupt enable + 10 + 1 + + + CTSEN + CTS enable + 9 + 1 + + + RTSEN + RTS enable + 8 + 1 + + + DMATEN + DMA transmitter enable + 7 + 1 + + + DMAREN + DMA receiver enable + 6 + 1 + + + SCMEN + Smartcard mode enable + 5 + 1 + + + SCNACKEN + Smartcard NACK enable + 4 + 1 + + + SLBEN + Single line bidirectional half-duplex enable + 3 + 1 + + + IRDALP + IrDA low-power mode + 2 + 1 + + + IRDAEN + IrDA enable + 1 + 1 + + + ERRIEN + Error interrupt enable + 0 + 1 + + + + + GDIV + GDIV + Guard time and division register + 0x18 + 0x20 + read-write + 0x0000 + + + SCGT + Smart card guard time value + 8 + 8 + + + ISDIV + IrDA/smartcard division value + 0 + 8 + + + + + + + USART2 + 0x40004400 + + USART2 + USART2 global interrupt + 38 + + + + USART3 + 0x40004800 + + USART3 + USART3 global interrupt + 39 + + + + USART6 + 0x40011400 + + USART6 + USART6 global interrupt + 71 + + + + ADC1 + Analog to digital converter + ADC + 0x40012000 + + 0x0 + 0x100 + registers + + + ADC + ADC1 global interrupt + 18 + + + + STS + STS + status register + 0x0 + 0x20 + read-write + 0x00000000 + + + RDY + ADC ready to conversion flag + 6 + 1 + read-only + + + OCCO + Ordinary channel conversion overflow flag + 5 + 1 + + + OCCS + Ordinary channel conversion start flag + 4 + 1 + + + PCCS + Preempted channel conversion start flag + 3 + 1 + + + PCCE + Preempted channels conversion end flag + 2 + 1 + + + OCCE + Ordinary channels conversion end flag + 1 + 1 + + + VMOR + Voltage monitoring out of range flag + 0 + 1 + + + + + CTRL1 + CTRL1 + control register 1 + 0x4 + 0x20 + read-write + 0x00000000 + + + OCCOIEN + Ordinary channel conversion overflow interrupt enable + 26 + 1 + + + CRSEL + Conversion resolution select + 24 + 2 + + + OCVMEN + Voltage monitoring enable on ordinary channels + 23 + 1 + + + PCVMEN + Voltage monitoring enable on preempted channels + 22 + 1 + + + OCPCNT + Partitioned mode conversion count of ordinary channels + 13 + 3 + + + PCPEN + Partitioned mode enable on preempted channels + 12 + 1 + + + OCPEN + Partitioned mode enable on ordinary channels + 11 + 1 + + + PCAUTOEN + Preempted group automatic conversion enable after ordinary group + 10 + 1 + + + VMSGEN + Voltage monitoring enable on a single channel + 9 + 1 + + + SQEN + Sequence mode enable + 8 + 1 + + + PCCEIEN + Conversion end interrupt enable for preempted channels + 7 + 1 + + + VMORIEN + Voltage monitoring out of range interrupt enable + 6 + 1 + + + OCCEIEN + Ordinary channel conversion end interrupt enable + 5 + 1 + + + VMCSEL + Voltage monitoring channel select + 0 + 5 + + + + + CTRL2 + CTRL2 + control register 2 + 0x8 + 0x20 + read-write + 0x00000000 + + + OCTESEL_H + High bit of trigger event select for ordinary channels conversion + 31 + 1 + + + OCSWTRG + Ordinary channel software conversion trigger + 30 + 1 + + + OCETE + Ordinary channel external trigger edge select + 28 + 2 + + + OCTESEL_L + Low bit of trigger event select for ordinary channels conversion + 24 + 4 + + + PCTESEL_H + High bit of trigger event select for preempted channels conversion + 23 + 1 + + + PCSWTRG + Preempted channel software conversion trigger + 22 + 1 + + + PCETE + Preempted channel external trigger edge select + 20 + 2 + + + PCTESEL_L + Low bit of trigger event select for preempted channels conversion + 16 + 4 + + + DTALIGN + Data alignment + 11 + 1 + + + EOCSFEN + Each ordinary channel conversion set OCCE flag enable + 10 + 1 + + + OCDRCEN + Ordinary channel DMA request continuation enable for independent mode + 9 + 1 + + + OCDMAEN + Ordinary channel DMA transfer enable for independent mode + 8 + 1 + + + ADABRT + ADC conversion abort + 4 + 1 + + + ADCALINIT + Initialize A/D calibration + 3 + 1 + + + ADCAL + A/D Calibration + 2 + 1 + + + RPEN + Repeat mode enable + 1 + 1 + + + ADCEN + A/D converter enable + 0 + 1 + + + + + SPT1 + SPT1 + sample time register 1 + 0xC + 0x20 + read-write + 0x00000000 + + + CSPT18 + Selection sample time of channel ADC_IN18 + 24 + 3 + + + CSPT17 + Selection sample time of channel ADC_IN17 + 21 + 3 + + + CSPT16 + Selection sample time of channel ADC_IN16 + 18 + 3 + + + CSPT15 + Selection sample time of channel ADC_IN15 + 15 + 3 + + + CSPT14 + Selection sample time of channel ADC_IN14 + 12 + 3 + + + CSPT13 + Selection sample time of channel ADC_IN13 + 9 + 3 + + + CSPT12 + Selection sample time of channel ADC_IN12 + 6 + 3 + + + CSPT11 + Selection sample time of channel ADC_IN11 + 3 + 3 + + + CSPT10 + Selection sample time of channel ADC_IN10 + 0 + 3 + + + + + SPT2 + SPT2 + sample time register 2 + 0x10 + 0x20 + read-write + 0x00000000 + + + CSPT9 + Selection sample time of channel ADC_IN9 + 27 + 3 + + + CSPT8 + Selection sample time of channel ADC_IN8 + 24 + 3 + + + CSPT7 + Selection sample time of channel ADC_IN7 + 21 + 3 + + + CSPT6 + Selection sample time of channel ADC_IN6 + 18 + 3 + + + CSPT5 + Selection sample time of channel ADC_IN5 + 15 + 3 + + + CSPT4 + Selection sample time of channel ADC_IN4 + 12 + 3 + + + CSPT3 + Selection sample time of channel ADC_IN3 + 9 + 3 + + + CSPT2 + Selection sample time of channel ADC_IN2 + 6 + 3 + + + CSPT1 + Selection sample time of channel ADC_IN1 + 3 + 3 + + + CSPT0 + Selection sample time of channel ADC_IN0 + 0 + 3 + + + + + PCDTO1 + PCDTO1 + Preempted channel 1 data offset register + 0x14 + 0x20 + read-write + 0x00000000 + + + PCDTO1 + Data offset for Preempted channel 1 + 0 + 12 + + + + + PCDTO2 + PCDTO2 + Preempted channel 2 data offset register + 0x18 + 0x20 + read-write + 0x00000000 + + + PCDTO2 + Data offset for Preempted channel 2 + 0 + 12 + + + + + PCDTO3 + PCDTO3 + Preempted channel 3 data offset register + 0x1C + 0x20 + read-write + 0x00000000 + + + PCDTO3 + Data offset for Preempted channel 3 + 0 + 12 + + + + + PCDTO4 + PCDTO4 + Preempted channel 4 data offset register + 0x20 + 0x20 + read-write + 0x00000000 + + + PCDTO4 + Data offset for Preempted channel 4 + 0 + 12 + + + + + VMHB + VMHB + Voltage monitoring high boundary register + 0x24 + 0x20 + read-write + 0x00000FFF + + + VMHB + Voltage monitoring high boundary + 0 + 12 + + + + + VMLB + VMLB + Voltage monitoring low boundary register + 0x28 + 0x20 + read-write + 0x00000000 + + + VMLB + Voltage monitoring low boundary + 0 + 12 + + + + + OSQ1 + OSQ1 + Ordinary sequence register 1 + 0x2C + 0x20 + read-write + 0x00000000 + + + OCLEN + Ordinary conversion sequence length + 20 + 4 + + + OSN16 + Number of 16th conversion in ordinary sequence + 15 + 5 + + + OSN15 + Number of 15th conversion in ordinary sequence + 10 + 5 + + + OSN14 + Number of 14th conversion in ordinary sequence + 5 + 5 + + + OSN13 + Number of 13th conversion in ordinary sequence + 0 + 5 + + + + + OSQ2 + OSQ2 + Ordinary sequence register 2 + 0x30 + 0x20 + read-write + 0x00000000 + + + OSN12 + Number of 12th conversion in ordinary sequence + 25 + 5 + + + OSN11 + Number of 11th conversion in ordinary sequence + 20 + 5 + + + OSN10 + Number of 10th conversion in ordinary sequence + 15 + 5 + + + OSN9 + Number of 8th conversion in ordinary sequence + 10 + 5 + + + OSN8 + Number of 7th conversion in ordinary sequence + 5 + 5 + + + OSN7 + Number of 13th conversion in ordinary sequence + 0 + 5 + + + + + OSQ3 + OSQ3 + Ordinary sequence register 3 + 0x34 + 0x20 + read-write + 0x00000000 + + + OSN6 + Number of 6th conversion in ordinary sequence + 25 + 5 + + + OSN5 + Number of 5th conversion in ordinary sequence + 20 + 5 + + + OSN4 + Number of 4th conversion in ordinary sequence + 15 + 5 + + + OSN3 + number of 3rd conversion in ordinary sequence + 10 + 5 + + + OSN2 + Number of 2nd conversion in ordinary sequence + 5 + 5 + + + OSN1 + Number of 1st conversion in ordinary sequence + 0 + 5 + + + + + PSQ + PSQ + Preempted sequence register + 0x38 + 0x20 + read-write + 0x00000000 + + + PCLEN + Preempted conversion sequence length + 20 + 2 + + + PSN4 + Number of 4th conversion in Preempted sequence + 15 + 5 + + + PSN3 + Number of 3rd conversion in Preempted sequence + 10 + 5 + + + PSN2 + Number of 2nd conversion in Preempted sequence + 5 + 5 + + + PSN1 + Number of 1st conversion in Preempted sequence + 0 + 5 + + + + + PDT1 + PDT1 + Preempted data register 1 + 0x3C + 0x20 + read-only + 0x00000000 + + + PDT1 + Preempted data + 0 + 16 + + + + + PDT2 + PDT2 + Preempted data register 2 + 0x40 + 0x20 + read-only + 0x00000000 + + + PDT2 + Preempted data + 0 + 16 + + + + + PDT3 + PDT3 + Preempted data register 3 + 0x44 + 0x20 + read-only + 0x00000000 + + + PDT3 + Preempted data + 0 + 16 + + + + + PDT4 + PDT4 + Preempted data register 4 + 0x48 + 0x20 + read-only + 0x00000000 + + + PDT4 + Preempted data + 0 + 16 + + + + + ODT + ODT + Ordinary data register + 0x4C + 0x20 + read-only + 0x00000000 + + + ODT + Conversion data of ordinary channel + 0 + 16 + + + + + OVSP + OVSP + oversampling register + 0x80 + 0x20 + read-write + 0x00000000 + + + OOSRSEL + Ordinary oversampling recovery mode select + 10 + 1 + + + OOSTREN + Ordinary oversampling trigger mode enable + 9 + 1 + + + OSSSEL + Oversampling shift select + 5 + 4 + + + OSRSEL + Oversampling ratio select + 2 + 3 + + + POSEN + Preempted oversampling enable + 1 + 1 + + + OOSEN + Ordinary oversampling enable + 0 + 1 + + + + + CALVAL + CALVAL + Calibration value register + 0xB4 + 0x20 + read-write + 0x00000000 + + + CALVAL + A/D Calibration value + 0 + 7 + + + + + + + ADC2 + 0x40012100 + + ADC + ADC2 global interrupts + 18 + + + + ADC3 + 0x40012200 + + ADC + ADC3 global interrupts + 18 + + + + ADCCOM + ADC common area + ADC + 0x40012300 + + 0x0 + 0x100 + registers + + + + CSTS + CSTS + Common status register + 0x0 + 0x20 + read-only + 0x00000000 + + + RDY3 + ADC ready to conversion flag of ADC3 + 22 + 1 + + + OCCO3 + Ordinary channel conversion overflow flag of ADC3 + 21 + 1 + + + OCCS3 + Ordinary channel conversion start flag of ADC3 + 20 + 1 + + + PCCS3 + Preempted channel conversion start flag of ADC3 + 19 + 1 + + + PCCE3 + Preempted channels conversion end flag of ADC3 + 18 + 1 + + + OCCE3 + Ordinary channels conversion end flag of ADC3 + 17 + 1 + + + VMOR3 + Voltage monitoring out of range flag of ADC3 + 16 + 1 + + + RDY2 + ADC ready to conversion flag of ADC2 + 14 + 1 + + + OCCO2 + Ordinary channel conversion overflow flag of ADC2 + 13 + 1 + + + OCCS2 + Ordinary channel conversion start flag of ADC2 + 12 + 1 + + + PCCS2 + Preempted channel conversion start flag of ADC2 + 11 + 1 + + + PCCE2 + Preempted channels conversion end flag of ADC2 + 10 + 1 + + + OCCE2 + Ordinary channels conversion end flag of ADC2 + 9 + 1 + + + VMOR2 + Voltage monitoring out of range flag of ADC2 + 8 + 1 + + + RDY1 + ADC ready to conversion flag of ADC1 + 6 + 1 + + + OCCO1 + Ordinary channel conversion overflow flag of ADC1 + 5 + 1 + + + OCCS1 + Ordinary channel conversion start flag of ADC1 + 4 + 1 + + + PCCS1 + Preempted channel conversion start flag of ADC1 + 3 + 1 + + + PCCE1 + Preempted channels conversion end flag of ADC1 + 2 + 1 + + + OCCE1 + Ordinary channels conversion end flag of ADC1 + 1 + 1 + + + VMOR1 + Voltage monitoring out of range flag of ADC1 + 0 + 1 + + + + + CCTRL + CCTRL + Common control register + 0x4 + 0x20 + read-write + 0x00000000 + + + MSDMASEL_H + High bit of ordinary channel DMA transfer mode select for master slave mode + 28 + 1 + + + ITSRVEN + Internal temperature sensor and VINTRV enable + 23 + 1 + + + VBATEN + VBAT enable + 22 + 1 + + + ADCDIV + ADC division + 16 + 4 + + + MSDMASEL_L + Low bit of ordinary channel DMA transfer mode select for master slave mode + 14 + 2 + + + MSDRCEN + Ordinary channel DMA request continuation enable for master slave mode + 13 + 1 + + + ASISEL + Adjacent ADC sampling interval select for ordinary shifting mode + 8 + 4 + + + MSSEL + Master slave mode select + 0 + 5 + + + + + CODT + CODT + Common Ordinary data register + 0x8 + 0x20 + read-only + 0x00000000 + + + CODTH + Ordinary conversion high halfword data for master slave mode + 16 + 16 + + + CODTL + Ordinary conversion low halfword data for master slave mode + 0 + 16 + + + + + + + CAN1 + Can controller area network + CAN + 0x40006400 + + 0x0 + 0x400 + registers + + + CAN1_TX + CAN1 TX interrupt + 19 + + + CAN1_RX0 + CAN1 RX0 interrupt + 20 + + + CAN_RX1 + CAN1 RX1 interrupt + 21 + + + CAN_SE + CAN1 SE interrupt + 22 + + + + MCTRL + MCTRL + Main control register + 0x0 + 0x20 + read-write + 0x00010002 + + + PTD + Prohibit transmission when debug + 16 + 1 + + + SPRST + Software partial reset + 15 + 1 + + + TTCEN + Time triggered communication mode enable + 7 + 1 + + + AEBOEN + Automatic exit bus-off enable + 6 + 1 + + + AEDEN + Automatic exit doze mode enable + 5 + 1 + + + PRSFEN + Prohibit retransmission when sending fails enable + 4 + 1 + + + MDRSEL + Message discarding rule select when overflow + 3 + 1 + + + MMSSR + Multiple message sending sequence rule + 2 + 1 + + + DZEN + Doze mode enable + 1 + 1 + + + FZEN + Freeze mode enable + 0 + 1 + + + + + MSTS + MSTS + Main status register + 0x4 + 0x20 + 0x00000C02 + + + REALRX + Real time level of RX pin + 11 + 1 + read-only + + + LSAMPRX + Last sample level of RX pin + 10 + 1 + read-only + + + CURS + Currently receiving status + 9 + 1 + read-only + + + CUSS + Currently sending status + 8 + 1 + read-only + + + EDZIF + Enter doze mode interrupt flag + 4 + 1 + read-write + + + QDZIF + Quit doze mode interrupt flag + 3 + 1 + read-write + + + EOIF + Error occur Interrupt flag + 2 + 1 + read-write + + + DZC + Doze mode confirm + 1 + 1 + read-only + + + FZC + Freeze mode confirm + 0 + 1 + read-only + + + + + TSTS + TSTS + Transmit status register + 0x8 + 0x20 + 0x1C000000 + + + TM2LPF + Transmit mailbox 2 lowest priority flag + 31 + 1 + read-only + + + TM1LPF + Transmit mailbox 1 lowest priority flag + 30 + 1 + read-only + + + TM0LPF + Transmit mailbox 0 lowest priority flag + 29 + 1 + read-only + + + TM2EF + Transmit mailbox 2 empty flag + 28 + 1 + read-only + + + TM1EF + Transmit mailbox 1 empty flag + 27 + 1 + read-only + + + TM0EF + Transmit mailbox 0 empty flag + 26 + 1 + read-only + + + TMNR + Transmit Mailbox number record + 24 + 2 + read-only + + + TM2CT + Transmit mailbox 2 cancel transmission + 23 + 1 + read-write + + + TM2TEF + Transmit mailbox 2 transmission error flag + 19 + 1 + read-write + + + TM2ALF + Transmit mailbox 2 arbitration lost flag + 18 + 1 + read-write + + + TM2TSF + Transmit mailbox 2 transmission success flag + 17 + 1 + read-write + + + TM2TCF + transmit mailbox 2 transmission complete flag + 16 + 1 + read-write + + + TM1CT + Transmit mailbox 1 cancel transmission + 15 + 1 + read-write + + + TM1TEF + Transmit mailbox 1 transmission error flag + 11 + 1 + read-write + + + TM1ALF + Transmit mailbox 1 arbitration lost flag + 10 + 1 + read-write + + + TM1TSF + Transmit mailbox 1 transmission success flag + 9 + 1 + read-write + + + TM1TCF + Transmit mailbox 1 transmission complete flag + 8 + 1 + read-write + + + TM0CT + Transmit mailbox 0 cancel transmission + 7 + 1 + read-write + + + TM0TEF + Transmit mailbox 0 transmission error flag + 3 + 1 + read-write + + + TM0ALF + Transmit mailbox 0 arbitration lost flag + 2 + 1 + read-write + + + TM0TSF + Transmit mailbox 0 transmission success flag + 1 + 1 + read-write + + + TM0TCF + Transmit mailbox 0 transmission complete flag + 0 + 1 + read-write + + + + + RF0 + RF0 + Receive FIFO 0 register + 0xC + 0x20 + 0x00000000 + + + RF0R + Receive FIFO 0 release + 5 + 1 + read-write + + + RF0OF + Receive FIFO 0 overflow flag + 4 + 1 + read-write + + + RF0FF + Receive FIFO 0 full flag + 3 + 1 + read-write + + + RF0MN + Receive FIFO 0 message num + 0 + 2 + read-only + + + + + RF1 + RF1 + Receive FIFO 1 register + 0x10 + 0x20 + 0x00000000 + + + RF1R + Receive FIFO 1 release + 5 + 1 + read-write + + + RF1OF + Receive FIFO 1 overflow flag + 4 + 1 + read-write + + + RF1FF + Receive FIFO 1 full flag + 3 + 1 + read-write + + + RF1MN + Receive FIFO 1 message num + 0 + 2 + read-only + + + + + INTEN + INTEN + Interrupt enable register + 0x14 + 0x20 + read-write + 0x00000000 + + + EDZIEN + Enter doze mode interrupt enable + 17 + 1 + + + QDZIEN + Quit doze mode interrupt enable + 16 + 1 + + + EOIEN + Error occur interrupt enable + 15 + 1 + + + ETRIEN + Error type record interrupt enable + 11 + 1 + + + BOIEN + Bus-off interrupt enable + 10 + 1 + + + EPIEN + Error passive interrupt enable + 9 + 1 + + + EAIEN + Error active interrupt enable + 8 + 1 + + + RF1OIEN + Receive FIFO 1 overflow interrupt enable + 6 + 1 + + + RF1FIEN + Receive FIFO 1 full interrupt enable + 5 + 1 + + + RF1MIEN + FIFO 1 receive message interrupt enable + 4 + 1 + + + RF0OIEN + Receive FIFO 0 overflow interrupt enable + 3 + 1 + + + RF0FIEN + Receive FIFO 0 full interrupt enable + 2 + 1 + + + RF0MIEN + FIFO 0 receive message interrupt enable + 1 + 1 + + + TCIEN + Transmission complete interrupt enable + 0 + 1 + + + + + ESTS + ESTS + Error status register + 0x18 + 0x20 + 0x00000000 + + + REC + Receive error counter + 24 + 8 + read-only + + + TEC + Transmit error counter + 16 + 8 + read-only + + + ETR + Error type record + 4 + 3 + read-write + + + BOF + Bus-off flag + 2 + 1 + read-only + + + EPF + Error passive flag + 1 + 1 + read-only + + + EAF + Error active flag + 0 + 1 + read-only + + + + + BTMG + BTMG + Bit timing register + 0x1C + 0x20 + read-write + 0x00000000 + + + LOEN + Listen-Only mode + 31 + 1 + + + LBEN + Loop back mode + 30 + 1 + + + RSAW + Resynchronization adjust width + 24 + 2 + + + BTS2 + Bit time segment 2 + 20 + 3 + + + BTS1 + Bit time segment 1 + 16 + 4 + + + BRDIV + Baud rate division + 0 + 12 + + + + + TMI0 + TMI0 + Transmit mailbox 0 identifier register + 0x180 + 0x20 + read-write + 0x00000000 + + + TMSID + Transmit mailbox standard identifier or extended identifier high bytes + 21 + 11 + + + TMEID + Ttransmit mailbox extended identifier + 3 + 18 + + + TMIDSEL + Transmit mailbox identifier type select + 2 + 1 + + + TMFRSEL + Transmit mailbox frame type select + 1 + 1 + + + TMSR + Transmit mailbox send request + 0 + 1 + + + + + TMC0 + TMC0 + Transmit mailbox 0 data length and time stamp register + 0x184 + 0x20 + read-write + 0x00000000 + + + TMTS + Transmit mailbox time stamp + 16 + 16 + + + TMTSTEN + Transmit mailbox time stamp transmit enable + 8 + 1 + + + TMDTBL + Transmit mailbox data byte length + 0 + 4 + + + + + TMDTL0 + TMDTL0 + Transmit mailbox 0 low byte data register + 0x188 + 0x20 + read-write + 0x00000000 + + + TMDT3 + Transmit mailbox data byte 3 + 24 + 8 + + + TMDT2 + Transmit mailbox data byte 2 + 16 + 8 + + + TMDT1 + Transmit mailbox data byte 1 + 8 + 8 + + + TMDT0 + Transmit mailbox data byte 0 + 0 + 8 + + + + + TMDTH0 + TMDTH0 + Transmit mailbox 0 high byte data register + 0x18C + 0x20 + read-write + 0x00000000 + + + TMDT7 + Transmit mailbox data byte 7 + 24 + 8 + + + TMDT6 + Transmit mailbox data byte 6 + 16 + 8 + + + TMDT5 + Transmit mailbox data byte 5 + 8 + 8 + + + TMDT4 + Transmit mailbox data byte 4 + 0 + 8 + + + + + TMI1 + TMI1 + Transmit mailbox 1 identifier register + 0x190 + 0x20 + read-write + 0x00000000 + + + TMSID + Transmit mailbox standard identifier or extended identifier high bytes + 21 + 11 + + + TMEID + Ttransmit mailbox extended identifier + 3 + 18 + + + TMIDSEL + Transmit mailbox identifier type select + 2 + 1 + + + TMFRSEL + Transmit mailbox frame type select + 1 + 1 + + + TMSR + Transmit mailbox send request + 0 + 1 + + + + + TMC1 + TMC1 + Transmit mailbox 1 data length and time stamp register + 0x194 + 0x20 + read-write + 0x00000000 + + + TMTS + Transmit mailbox time stamp + 16 + 16 + + + TMTSTEN + Transmit mailbox time stamp transmit enable + 8 + 1 + + + TMDTBL + Transmit mailbox data byte length + 0 + 4 + + + + + TMDTL1 + TMDTL1 + Transmit mailbox 1 low byte data register + 0x198 + 0x20 + read-write + 0x00000000 + + + TMDT3 + Transmit mailbox data byte 3 + 24 + 8 + + + TMDT2 + Transmit mailbox data byte 2 + 16 + 8 + + + TMDT1 + Transmit mailbox data byte 1 + 8 + 8 + + + TMDT0 + Transmit mailbox data byte 0 + 0 + 8 + + + + + TMDTH1 + TMDTH1 + Transmit mailbox 1 high byte data register + 0x19C + 0x20 + read-write + 0x00000000 + + + TMDT7 + Transmit mailbox data byte 7 + 24 + 8 + + + TMDT6 + Transmit mailbox data byte 6 + 16 + 8 + + + TMDT5 + Transmit mailbox data byte 5 + 8 + 8 + + + TMDT4 + Transmit mailbox data byte 4 + 0 + 8 + + + + + TMI2 + TMI2 + Transmit mailbox 2 identifier register + 0x1A0 + 0x20 + read-write + 0x00000000 + + + TMSID + Transmit mailbox standard identifier or extended identifier high bytes + 21 + 11 + + + TMEID + Ttransmit mailbox extended identifier + 3 + 18 + + + TMIDSEL + Transmit mailbox identifier type select + 2 + 1 + + + TMFRSEL + Transmit mailbox frame type select + 1 + 1 + + + TMSR + Transmit mailbox send request + 0 + 1 + + + + + TMC2 + TMC2 + Transmit mailbox 2 data length and time stamp register + 0x1A4 + 0x20 + read-write + 0x00000000 + + + TMTS + Transmit mailbox time stamp + 16 + 16 + + + TMTSTEN + Transmit mailbox time stamp transmit enable + 8 + 1 + + + TMDTBL + Transmit mailbox data byte length + 0 + 4 + + + + + TMDTL2 + TMDTL2 + Transmit mailbox 2 low byte data register + 0x1A8 + 0x20 + read-write + 0x00000000 + + + TMDT3 + Transmit mailbox data byte 3 + 24 + 8 + + + TMDT2 + Transmit mailbox data byte 2 + 16 + 8 + + + TMDT1 + Transmit mailbox data byte 1 + 8 + 8 + + + TMDT0 + Transmit mailbox data byte 0 + 0 + 8 + + + + + TMDTH2 + TMDTH2 + Transmit mailbox 2 high byte data register + 0x1AC + 0x20 + read-write + 0x00000000 + + + TMDT7 + Transmit mailbox data byte 7 + 24 + 8 + + + TMDT6 + Transmit mailbox data byte 6 + 16 + 8 + + + TMDT5 + Transmit mailbox data byte 5 + 8 + 8 + + + TMDT4 + Transmit mailbox data byte 4 + 0 + 8 + + + + + RFI0 + RFI0 + Receive FIFO 0 register + 0x1B0 + 0x20 + read-only + 0x00000000 + + + RFSID + Receive FIFO standard identifier or receive FIFO extended identifier + 21 + 11 + + + RFEID + Receive FIFO extended identifier + 3 + 18 + + + RFIDI + Receive FIFO identifier type indication + 2 + 1 + + + RFFRI + Receive FIFO frame type indication + 1 + 1 + + + + + RFC0 + RFC0 + Receive FIFO 0 data length and time stamp register + 0x1B4 + 0x20 + read-only + 0x00000000 + + + RFTS + Receive FIFO time stamp + 16 + 16 + + + RFFMN + Receive FIFO filter match number + 8 + 8 + + + RFDTL + Receive FIFO data length + 0 + 4 + + + + + RFDTL0 + RFDTL0 + Receive FIFO 0 low byte data register + 0x1B8 + 0x20 + read-only + 0x00000000 + + + RFDT3 + Receive FIFO data byte 3 + 24 + 8 + + + RFDT2 + Receive FIFO data byte 2 + 16 + 8 + + + RFDT1 + Receive FIFO data byte 1 + 8 + 8 + + + RFDT0 + Receive FIFO data byte 0 + 0 + 8 + + + + + RFDTH0 + RFDTH0 + Receive FIFO 0 high byte data register + 0x1BC + 0x20 + read-only + 0x00000000 + + + RFDT7 + Receive FIFO data byte 7 + 24 + 8 + + + RFDT6 + Receive FIFO data byte 6 + 16 + 8 + + + RFDT5 + Receive FIFO data byte 5 + 8 + 8 + + + RFDT4 + Receive FIFO data byte 4 + 0 + 8 + + + + + RFI1 + RFI1 + Receive FIFO 1 register + 0x1C0 + 0x20 + read-only + 0x00000000 + + + RFSID + Receive FIFO standard identifier or receive FIFO extended identifier + 21 + 11 + + + RFEID + Receive FIFO extended identifier + 3 + 18 + + + RFIDI + Receive FIFO identifier type indication + 2 + 1 + + + RFFRI + Receive FIFO frame type indication + 1 + 1 + + + + + RFC1 + RFC1 + Receive FIFO 1 data length and time stamp register + 0x1C4 + 0x20 + read-only + 0x00000000 + + + RFTS + Receive FIFO time stamp + 16 + 16 + + + RFFMN + Receive FIFO filter match number + 8 + 8 + + + RFDTL + Receive FIFO data length + 0 + 4 + + + + + RFDTL1 + RFDTL1 + Receive FIFO 1 low byte data register + 0x1C8 + 0x20 + read-only + 0x00000000 + + + RFDT3 + Receive FIFO data byte 3 + 24 + 8 + + + RFDT2 + Receive FIFO data byte 2 + 16 + 8 + + + RFDT1 + Receive FIFO data byte 1 + 8 + 8 + + + RFDT0 + Receive FIFO data byte 0 + 0 + 8 + + + + + RFDTH1 + RFDTH1 + Receive FIFO 1 high byte data register + 0x1CC + 0x20 + read-only + 0x00000000 + + + RFDT7 + Receive FIFO data byte 7 + 24 + 8 + + + RFDT6 + Receive FIFO data byte 6 + 16 + 8 + + + RFDT5 + Receive FIFO data byte 5 + 8 + 8 + + + RFDT4 + Receive FIFO data byte 4 + 0 + 8 + + + + + FCTRL + FCTRL + Filter control register + 0x200 + 0x20 + read-write + 0x00000000 + + + FCS + Filters configure switch + 0 + 1 + + + + + FMCFG + FMCFG + Filter mode config register + 0x204 + 0x20 + read-write + 0x00000000 + + + FMSEL0 + Filter mode select + 0 + 1 + + + FMSEL1 + Filter mode select + 1 + 1 + + + FMSEL2 + Filter mode select + 2 + 1 + + + FMSEL3 + Filter mode select + 3 + 1 + + + FMSEL4 + Filter mode select + 4 + 1 + + + FMSEL5 + Filter mode select + 5 + 1 + + + FMSEL6 + Filter mode select + 6 + 1 + + + FMSEL7 + Filter mode select + 7 + 1 + + + FMSEL8 + Filter mode select + 8 + 1 + + + FMSEL9 + Filter mode select + 9 + 1 + + + FMSEL10 + Filter mode select + 10 + 1 + + + FMSEL11 + Filter mode select + 11 + 1 + + + FMSEL12 + Filter mode select + 12 + 1 + + + FMSEL13 + Filter mode select + 13 + 1 + + + FMSEL14 + Filter mode select + 14 + 1 + + + FMSEL15 + Filter mode select + 15 + 1 + + + FMSEL16 + Filter mode select + 16 + 1 + + + FMSEL17 + Filter mode select + 17 + 1 + + + FMSEL18 + Filter mode select + 18 + 1 + + + FMSEL19 + Filter mode select + 19 + 1 + + + FMSEL20 + Filter mode select + 20 + 1 + + + FMSEL21 + Filter mode select + 21 + 1 + + + FMSEL22 + Filter mode select + 22 + 1 + + + FMSEL23 + Filter mode select + 23 + 1 + + + FMSEL24 + Filter mode select + 24 + 1 + + + FMSEL25 + Filter mode select + 25 + 1 + + + FMSEL26 + Filter mode select + 26 + 1 + + + FMSEL27 + Filter mode select + 27 + 1 + + + + + FBWCFG + FBWCFG + Filter bit width config register + 0x20C + 0x20 + read-write + 0x00000000 + + + FBWSEL0 + Filter bit width select + 0 + 1 + + + FBWSEL1 + Filter bit width select + 1 + 1 + + + FBWSEL2 + Filter bit width select + 2 + 1 + + + FBWSEL3 + Filter bit width select + 3 + 1 + + + FBWSEL4 + Filter bit width select + 4 + 1 + + + FBWSEL5 + Filter bit width select + 5 + 1 + + + FBWSEL6 + Filter bit width select + 6 + 1 + + + FBWSEL7 + Filter bit width select + 7 + 1 + + + FBWSEL8 + Filter bit width select + 8 + 1 + + + FBWSEL9 + Filter bit width select + 9 + 1 + + + FBWSEL10 + Filter bit width select + 10 + 1 + + + FBWSEL11 + Filter bit width select + 11 + 1 + + + FBWSEL12 + Filter bit width select + 12 + 1 + + + FBWSEL13 + Filter bit width select + 13 + 1 + + + FBWSEL14 + Filter bit width select + 14 + 1 + + + FBWSEL15 + Filter bit width select + 15 + 1 + + + FBWSEL16 + Filter bit width select + 16 + 1 + + + FBWSEL17 + Filter bit width select + 17 + 1 + + + FBWSEL18 + Filter bit width select + 18 + 1 + + + FBWSEL19 + Filter bit width select + 19 + 1 + + + FBWSEL20 + Filter bit width select + 20 + 1 + + + FBWSEL21 + Filter bit width select + 21 + 1 + + + FBWSEL22 + Filter bit width select + 22 + 1 + + + FBWSEL23 + Filter bit width select + 23 + 1 + + + FBWSEL24 + Filter bit width select + 24 + 1 + + + FBWSEL25 + Filter bit width select + 25 + 1 + + + FBWSEL26 + Filter bit width select + 26 + 1 + + + FBWSEL27 + Filter bit width select + 27 + 1 + + + + + FRF + FRF + Filter related FIFO register + 0x214 + 0x20 + read-write + 0x00000000 + + + FRFSEL0 + Filter relation FIFO select + 0 + 1 + + + FRFSEL1 + Filter relation FIFO select + 1 + 1 + + + FRFSEL2 + Filter relation FIFO select + 2 + 1 + + + FRFSEL3 + Filter relation FIFO select + 3 + 1 + + + FRFSEL4 + Filter relation FIFO select + 4 + 1 + + + FRFSEL5 + Filter relation FIFO select + 5 + 1 + + + FRFSEL6 + Filter relation FIFO select + 6 + 1 + + + FRFSEL7 + Filter relation FIFO select + 7 + 1 + + + FRFSEL8 + Filter relation FIFO select + 8 + 1 + + + FRFSEL9 + Filter relation FIFO select + 9 + 1 + + + FRFSEL10 + Filter relation FIFO select + 10 + 1 + + + FRFSEL11 + Filter relation FIFO select + 11 + 1 + + + FRFSEL12 + Filter relation FIFO select + 12 + 1 + + + FRFSEL13 + Filter relation FIFO select + 13 + 1 + + + FRFSEL14 + Filter relation FIFO select + 14 + 1 + + + FRFSEL15 + Filter relation FIFO select + 15 + 1 + + + FRFSEL16 + Filter relation FIFO select + 16 + 1 + + FRFSEL17 + Filter relation FIFO select + 17 + 1 + + + FRFSEL18 + Filter relation FIFO select + 18 + 1 + + + FRFSEL19 + Filter relation FIFO select + 19 + 1 + + + FRFSEL20 + Filter relation FIFO select + 20 + 1 + + + FRFSEL21 + Filter relation FIFO select + 21 + 1 + + + FRFSEL22 + Filter relation FIFO select + 22 + 1 + + + FRFSEL23 + Filter relation FIFO select + 23 + 1 + + + FRFSEL24 + Filter relation FIFO select + 24 + 1 + + + FRFSEL25 + Filter relation FIFO select + 25 + 1 + + + FRFSEL26 + Filter relation FIFO select + 26 + 1 + + + FRFSEL27 + Filter relation FIFO select + 27 + 1 + + + + + FACFG + FACFG + Filter activate configuration register + 0x21C + 0x20 + read-write + 0x00000000 + + + FAEN0 + Filter activate enable + 0 + 1 + + + FAEN1 + Filter activate enable + 1 + 1 + + + FAEN2 + Filter activate enable + 2 + 1 + + + FAEN3 + Filter activate enable + 3 + 1 + + + FAEN4 + Filter activate enable + 4 + 1 + + + FAEN5 + Filter activate enable + 5 + 1 + + + FAEN6 + Filter activate enable + 6 + 1 + + + FAEN7 + Filter activate enable + 7 + 1 + + + FAEN8 + Filter activate enable + 8 + 1 + + + FAEN9 + Filter activate enable + 9 + 1 + + + FAEN10 + Filter activate enable + 10 + 1 + + + FAEN11 + Filter activate enable + 11 + 1 + + + FAEN12 + Filter activate enable + 12 + 1 + + + FAEN13 + Filter activate enable + 13 + 1 + + + FAEN14 + Filter activate enable + 14 + 1 + + FAEN15 + Filter activate enable + 15 + 1 + + + FAEN16 + Filter activate enable + 16 + 1 + + + FAEN17 + Filter activate enable + 17 + 1 + + + FAEN18 + Filter activate enable + 18 + 1 + + + FAEN19 + Filter activate enable + 19 + 1 + + + FAEN20 + Filter activate enable + 20 + 1 + + + FAEN21 + Filter activate enable + 21 + 1 + + + FAEN22 + Filter activate enable + 22 + 1 + + + FAEN23 + Filter activate enable + 23 + 1 + + + FAEN24 + Filter activate enable + 24 + 1 + + + FAEN25 + Filter activate enable + 25 + 1 + + + FAEN26 + Filter activate enable + 26 + 1 + + + FAEN27 + Filter activate enable + 27 + 1 + + + + + F0FB1 + F0FB1 + Filter bank 0 filtrate bit register 1 + 0x240 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F0FB2 + F0FB2 + Filter bank 0 filtrate bit register 2 + 0x244 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F1FB1 + F1FB1 + Filter bank 1 filtrate bit register 1 + 0x248 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F1FB2 + F1FB2 + Filter bank 1 filtrate bit register 2 + 0x24C + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F2FB1 + F2FB1 + Filter bank 2 filtrate bit register 1 + 0x250 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F2FB2 + F2FB2 + Filter bank 2 filtrate bit register 2 + 0x254 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F3FB1 + F3FB1 + Filter bank 3 filtrate bit register 1 + 0x258 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F3FB2 + F3FB2 + Filter bank 3 filtrate bit register 2 + 0x25C + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F4FB1 + F4FB1 + Filter bank 4 filtrate bit register 1 + 0x260 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F4FB2 + F4FB2 + Filter bank 4 filtrate bit register 2 + 0x264 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F5FB1 + F5FB1 + Filter bank 5 filtrate bit register 1 + 0x268 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F5FB2 + F5FB2 + Filter bank 5 filtrate bit register 2 + 0x26C + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F6FB1 + F6FB1 + Filter bank 6 filtrate bit register 1 + 0x270 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F6FB2 + F6FB2 + Filter bank 6 filtrate bit register 2 + 0x274 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + + F7FB1 + F7FB1 + Filter bank 7 filtrate bit register 1 + 0x278 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F7FB2 + F7FB2 + Filter bank 7 filtrate bit register 2 + 0x27C + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F8FB1 + F8FB1 + Filter bank 8 filtrate bit register 1 + 0x280 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F8FB2 + F8FB2 + Filter bank 8 filtrate bit register 2 + 0x284 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F9FB1 + F9FB1 + Filter bank 9 filtrate bit register 1 + 0x288 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F9FB2 + F9FB2 + Filter bank 9 filtrate bit register 2 + 0x28C + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F10FB1 + F10FB1 + Filter bank 10 filtrate bit register 1 + 0x290 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F10FB2 + F10FB2 + Filter bank 10 filtrate bit register 2 + 0x294 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F11FB1 + F11FB1 + Filter bank 11 filtrate bit register 1 + 0x298 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F11FB2 + F11FB2 + Filter bank 11 filtrate bit register 2 + 0x29C + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F12FB1 + F12FB1 + Filter bank 12 filtrate bit register 1 + 0x2A0 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F12FB2 + F12FB2 + Filter bank 12 filtrate bit register 2 + 0x2A4 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F13FB1 + F13FB1 + Filter bank 13 filtrate bit register 1 + 0x2A8 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F13FB2 + F13FB2 + Filter bank 13 filtrate bit register 2 + 0x2AC + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F14FB1 + F14FB1 + Filter bank 14 filtrate bit register 1 + 0x2B0 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F14FB2 + F14FB2 + Filter bank 14 filtrate bit register 2 + 0x2B4 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F15FB1 + F15FB1 + Filter bank 15 filtrate bit register 1 + 0x2B8 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F15FB2 + F15FB2 + Filter bank 15 filtrate bit register 2 + 0x2BC + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F16FB1 + F16FB1 + Filter bank 16 filtrate bit register 1 + 0x2C0 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F16FB2 + F16FB2 + Filter bank 16 filtrate bit register 2 + 0x2C4 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F17FB1 + F17FB1 + Filter bank 17 filtrate bit register 1 + 0x2C8 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F17FB2 + F17FB2 + Filter bank 17 filtrate bit register 2 + 0x2CC + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F18FB1 + F18FB1 + Filter bank 18 filtrate bit register 1 + 0x2D0 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F18FB2 + F18FB2 + Filter bank 18 filtrate bit register 2 + 0x2D4 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F19FB1 + F19FB1 + Filter bank 19 filtrate bit register 1 + 0x2D8 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F19FB2 + F19FB2 + Filter bank 19 filtrate bit register 2 + 0x2DC + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F20FB1 + F20FB1 + Filter bank 20 filtrate bit register 1 + 0x2E0 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F20FB2 + F20FB2 + Filter bank 20 filtrate bit register 2 + 0x2E4 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F21FB1 + F21FB1 + Filter bank 21 filtrate bit register 1 + 0x2E8 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F21FB2 + F21FB2 + Filter bank 21 filtrate bit register 2 + 0x2EC + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F22FB1 + F22FB1 + Filter bank 22 filtrate bit register 1 + 0x2F0 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F22FB2 + F22FB2 + Filter bank 22 filtrate bit register 2 + 0x2F4 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F23FB1 + F23FB1 + Filter bank 23 filtrate bit register 1 + 0x2F8 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F23FB2 + F23FB2 + Filter bank 23 filtrate bit register 2 + 0x2FC + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F24FB1 + F24FB1 + Filter bank 24 filtrate bit register 1 + 0x300 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F24FB2 + F24FB2 + Filter bank 24 filtrate bit register 2 + 0x304 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F25FB1 + F25FB1 + Filter bank 25 filtrate bit register 1 + 0x308 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F25FB2 + F25FB2 + Filter bank 25 filtrate bit register 2 + 0x30C + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F26FB1 + F26FB1 + Filter bank 26 filtrate bit register 1 + 0x310 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F26FB2 + F26FB2 + Filter bank 26 filtrate bit register 2 + 0x314 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F27FB1 + F27FB1 + Filter bank 27 filtrate bit register 1 + 0x318 + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + F27FB2 + F27FB2 + Filter bank 27 filtrate bit register 2 + 0x31C + 0x20 + read-write + 0x00000000 + + + FFDB0 + Filter data bit + 0 + 1 + + + FFDB1 + Filter data bit + 1 + 1 + + + FFDB2 + Filter data bit + 2 + 1 + + + FFDB3 + Filter data bit + 3 + 1 + + + FFDB4 + Filter data bit + 4 + 1 + + + FFDB5 + Filter data bit + 5 + 1 + + + FFDB6 + Filter data bit + 6 + 1 + + + FFDB7 + Filter data bit + 7 + 1 + + + FFDB8 + Filter data bit + 8 + 1 + + + FFDB9 + Filter data bit + 9 + 1 + + + FFDB10 + Filter data bit + 10 + 1 + + + FFDB11 + Filter data bit + 11 + 1 + + + FFDB12 + Filter data bit + 12 + 1 + + + FFDB13 + Filter data bit + 13 + 1 + + + FFDB14 + Filter data bit + 14 + 1 + + + FFDB15 + Filter data bit + 15 + 1 + + + FFDB16 + Filter data bit + 16 + 1 + + + FFDB17 + Filter data bit + 17 + 1 + + + FFDB18 + Filter data bit + 18 + 1 + + + FFDB19 + Filter data bit + 19 + 1 + + + FFDB20 + Filter data bit + 20 + 1 + + + FFDB21 + Filter data bit + 21 + 1 + + + FFDB22 + Filter data bit + 22 + 1 + + + FFDB23 + Filter data bit + 23 + 1 + + + FFDB24 + Filter data bit + 24 + 1 + + + FFDB25 + Filter data bit + 25 + 1 + + + FFDB26 + Filter data bit + 26 + 1 + + + FFDB27 + Filter data bit + 27 + 1 + + + FFDB28 + Filter data bit + 28 + 1 + + + FFDB29 + Filter data bit + 29 + 1 + + + FFDB30 + Filter data bit + 30 + 1 + + + FFDB31 + Filter data bit + 31 + 1 + + + + + + + CAN2 + 0x40006800 + + CAN2_TX + CAN2 TX interrupt + 63 + + + CAN2_RX0 + CAN2 RX0 interrupt + 64 + + + CAN2_RX1 + CAN2 RX1 interrupt + 65 + + + CAN2_SE + CAN2 SE interrupt + 66 + + + + DAC + Digital to analog converter + DAC + 0x40007400 + + 0x0 + 0x400 + registers + + + + CTRL + CTRL + Control register (DAC_CTRL) + 0x0 + 0x20 + read-write + 0x00000000 + + + D1EN + DAC1 enable + 0 + 1 + + + D1OBDIS + DAC1 output buffer disable + 1 + 1 + + + D1TRGEN + DAC1 trigger enable + 2 + 1 + + + D1TRGSEL + DAC1 trigger selection + 3 + 3 + + + D1NM + DAC1 noise/triangle wave generation enable + 6 + 2 + + + D1NBSEL + DAC1 mask/amplitude selector + 8 + 4 + + + D1DMAEN + DAC1 DMA enable + 12 + 1 + + + D1DMAUDRIEN + DAC1 DMA underrun interrupt enable + 13 + 1 + + + D2EN + DAC2 enable + 16 + 1 + + + D2OBDIS + DAC2 output buffer disable + 17 + 1 + + + D2TRGEN + DAC2 trigger enable + 18 + 1 + + + D2TRGSEL + DAC2 trigger selection + 19 + 3 + + + D2NM + DAC2 noise/triangle wave generation enable + 22 + 2 + + + D2NBSEL + DAC2 mask/amplitude selector + 24 + 4 + + + D2DMAEN + DAC2 DMA enable + 28 + 1 + + + D2DMAUDRIEN + DAC2 DMA underrun interrupt enable + 29 + 1 + + + + + SWTRG + SWTRG + DAC software trigger register(DAC_SWTRIGR) + 0x4 + 0x20 + write-only + 0x00000000 + + + D1SWTRG + DAC1 software trigger + 0 + 1 + + + D2SWTRG + DAC2 software trigger + 1 + 1 + + + + + D1DTH12R + D1DTH12R + DAC1 12-bit right-aligned data holding register(DAC_D1DTH12R) + 0x8 + 0x20 + read-write + 0x00000000 + + + D1DT12R + DAC1 12-bit right-aligned data + 0 + 12 + + + + + D1DTH12L + D1DTH12L + DAC1 12-bit left aligned data holding register (DAC_D1DTH12L) + 0xC + 0x20 + read-write + 0x00000000 + + + D1DT12L + DAC1 12-bit left-aligned data + 4 + 12 + + + + + D1DTH8R + D1DTH8R + DAC1 8-bit right aligned data holding register (DAC_D1DTH8R) + 0x10 + 0x20 + read-write + 0x00000000 + + + D1DT8R + DAC1 8-bit right-aligned data + 0 + 8 + + + + + D2DTH12R + D2DTH12R + DAC2 12-bit right aligned data holding register (DAC_D2DTH12R) + 0x14 + 0x20 + read-write + 0x00000000 + + + D2DT12R + DAC2 12-bit right-aligned + data + 0 + 12 + + + + + D2DTH12L + D2DTH12L + DAC2 12-bit left aligned data holding register (DAC_D2DTH12L) + 0x18 + 0x20 + read-write + 0x00000000 + + + D2DT12L + DAC2 12-bit left-aligned data + 4 + 12 + + + + + D2DTH8R + D2DTH8R + DAC2 8-bit right-aligned data holding register (DAC_D2DTH8R) + 0x1C + 0x20 + read-write + 0x00000000 + + + D2DT8R + DAC2 8-bit right-aligned + data + 0 + 8 + + + + + DDTH12R + DDTH12R + Dual DAC 12-bit right-aligned data holding register (DAC_DDTH12R), Bits 31:28 Reserved, Bits 15:12 Reserved + 0x20 + 0x20 + read-write + 0x00000000 + + + DD1DT12R + DAC1 12-bit right-aligned data + 0 + 12 + + + DD2DT12R + DAC2 12-bit right-aligned data + 16 + 12 + + + + + DDTH12L + DDTH12L + DUAL DAC 12-bit left aligned data holding register (DAC_DDTH12L), Bits 19:16 Reserved, Bits 3:0 Reserved + 0x24 + 0x20 + read-write + 0x00000000 + + + DD1DT12L + DAC1 12-bit left-aligned data + 4 + 12 + + + DD2DT12L + DAC2 12-bit right-aligned data + 20 + 12 + + + + + DDTH8R + DDTH8R + DUAL DAC 8-bit right aligned data holding register (DAC_DDTH8R), Bits 31:16 Reserved + 0x28 + 0x20 + read-write + 0x00000000 + + + DD1DT8R + DAC1 8-bit right-aligned data + 0 + 8 + + + DD2DT8R + DAC2 8-bit right-aligned data + 8 + 8 + + + + + D1ODT + D1ODT + DAC1 data output register (DAC_D1ODT) + 0x2C + 0x20 + read-only + 0x00000000 + + + D1ODT + DAC1 data output + 0 + 12 + + + + + D2ODT + D2ODT + DAC2 data output register (DAC_D2ODT) + 0x30 + 0x20 + read-only + 0x00000000 + + + D2ODT + DAC2 data output + 0 + 12 + + + + + STS + STS + DAC2 status register + (DAC_STS) + 0x34 + 0x20 + read-write + 0x00000000 + + + DMAUDR1 + DAC1 DMA underrun flag + 13 + 1 + + + DMAUDR2 + DAC2 DMA underrun flag + 29 + 1 + + + + + + + DEBUG + Debug support + DEBUG + 0xE0042000 + + 0x0 + 0x400 + registers + + + + IDCODE + IDCODE + DEBUG IDCODE + 0x0 + 0x20 + read-only + 0x0 + + + PID + Product ID + 0 + 32 + + + + + CTRL + CTRL + DEBUG CTRL + 0x4 + 0x20 + read-write + 0x0 + + + SLEEP_DEBUG + SLEEP_DEBUG + 0 + 1 + + + DEEPSLEEP_DEBUG + DEEPSLEEP_DEBUG + 1 + 1 + + + STANDBY_DEBUG + STANDBY_DEBUG + 2 + 1 + + + + + APB1_PAUSE + APB1_PAUSE + DEBUG APB1 PAUSE + 0x8 + 0x20 + read-write + 0x0 + + + TMR2_PAUSE + TMR2_PAUSE + 0 + 1 + + + TMR3_PAUSE + TMR3_PAUSE + 1 + 1 + + + TMR4_PAUSE + TMR4_PAUSE + 2 + 1 + + + TMR5_PAUSE + TMR5_PAUSE + 3 + 1 + + + TMR6_PAUSE + TMR6_PAUSE + 4 + 1 + + + TMR7_PAUSE + TMR7_PAUSE + 5 + 1 + + + TMR12_PAUSE + TMR12_PAUSE + 6 + 1 + + + TMR13_PAUSE + TMR13_PAUSE + 7 + 1 + + + TMR14_PAUSE + TMR14_PAUSE + 8 + 1 + + + ERTC_PAUSE + ERTC_PAUSE + 10 + 1 + + + WWDT_PAUSE + WWDT_PAUSE + 11 + 1 + + + WDT_PAUSE + WDT_PAUSE + 12 + 1 + + + ERTC512_PAUSE + ERTC512_PAUSE + 15 + 1 + + + I2C1_SMBUS_TIMEOUT + I2C1_SMBUS_TIMEOUT + 24 + 1 + + + CAN1_PAUSE + CAN1_PAUSE + 25 + 1 + + + CAN2_PAUSE + CAN2_PAUSE + 26 + 1 + + + I2C2_SMBUS_TIMEOUT + I2C2_SMBUS_TIMEOUT + 27 + 1 + + + I2C3_SMBUS_TIMEOUT + I2C3_SMBUS_TIMEOUT + 28 + 1 + + + + + APB2_PAUSE + APB2_PAUSE + DEBUG APB2 PAUSE + 0xC + 0x20 + read-write + 0x0 + + + TMR1_PAUSE + TMR1_PAUSE + 0 + 1 + + + TMR8_PAUSE + TMR8_PAUSE + 1 + 1 + + + TMR20_PAUSE + TIM20_PAUSE + 6 + 1 + + + TMR9_PAUSE + TMR9_PAUSE + 16 + 1 + + + TMR10_PAUSE + TMR10_PAUSE + 17 + 1 + + + TMR11_PAUSE + TMR11_PAUSE + 18 + 1 + + + + + SER_ID + SER_ID + SERIES ID + 0x20 + 0x20 + read-only + 0x0 + + + REV_ID + version ID + 0 + 3 + + + SER_ID + series ID + 8 + 8 + + + + + + + UART4 + Universal asynchronous receiver transmitter + 0x40004C00 + + UART4 + UART4 global interrupt + 52 + + + + UART5 + Universal asynchronous receiver transmitter + 0x40005000 + + UART5 + UART5 global interrupt + 53 + + + + UART7 + Universal asynchronous receiver transmitter + 0x40007800 + + UART7 + UART7 global interrupt + 82 + + + + UART8 + Universal asynchronous receiver transmitter + 0x40007C00 + + UART8 + UART8 global interrupt + 83 + + + + CRC + CRC calculation unit + CRC + 0x40023000 + + 0x0 + 0x400 + registers + + + + DT + DT + Data register + 0x0 + 0x20 + read-write + 0xFFFFFFFF + + + DT + Data Register + 0 + 32 + + + + + CDT + CDT + Common data register + 0x4 + 0x20 + read-write + 0x00000000 + + + CDT + Common Data + 0 + 1 + + + + + CTRL + CTRL + Control register + 0x8 + 0x20 + read-write + 0x00000000 + + + RST + Reset bit + 0 + 1 + + + REVID + Reverse input data + 5 + 2 + + + REVOD + Reverse output data + 7 + 1 + + + + + IDT + IDT + Initial data register + 0x10 + 0x20 + read-write + 0xFFFFFFFF + + + IDT + Initial Data + 0 + 32 + + + + + + + FLASH + Flash memory controler + FLASH + 0x40023C00 + + 0x0 + 0x400 + registers + + + FLASH + Flash global interrupt + 4 + + + + PSR + PSR + Performance selection register + 0x0 + 0x20 + 0x00000330 + + + NZW_BST_STS + Flash non-zero wait area boost status + 13 + 1 + read-only + + + NZW_BST + Flash non-zero wait area boost + 12 + 1 + read-write + + + + + UNLOCK + UNLOCK + Unlock register + 0x4 + 0x20 + write-only + 0x00000000 + + + UKVAL + Unlock key value + 0 + 32 + + + + + USD_UNLOCK + USD_UNLOCK + USD unlock register + 0x8 + 0x20 + write-only + 0x00000000 + + + USD_UKVAL + User system data Unlock key value + 0 + 32 + + + + + STS + STS + Status register + 0xC + 0x20 + 0x00000000 + + + ODF + Operate done flag + 5 + 1 + read-write + + + EPPERR + Erase/program protection error + 4 + 1 + read-write + + + PRGMERR + program error + 2 + 1 + read-write + + + OBF + Operate busy flag + 0 + 1 + read-only + + + + + CTRL + CTRL + Control register + 0x10 + 0x20 + read-write + 0x00000080 + + + FPRGM + Flash program + 0 + 1 + + + SECERS + Sector erase + 1 + 1 + + + BANKERS + Bank erase + 2 + 1 + + + BLKERS + Block erase + 3 + 1 + + + USDPRGM + User system data program + 4 + 1 + + + USDERS + User system data erase + 5 + 1 + + + ERSTR + Erasing start + 6 + 1 + + + OPLK + Operation lock + 7 + 1 + + + USDULKS + User system data unlock success + 9 + 1 + + + ERRIE + Error interrupt enable + 10 + 1 + + + ODFIE + Operation done flag interrupt enable + 12 + 1 + + + + + ADDR + ADDR + Address register + 0x14 + 0x20 + write-only + 0x00000000 + + + FA + Flash Address + 0 + 32 + + + + + USD + USD + User system data register + 0x1C + 0x20 + read-only + 0x03FFFFFC + + + USDERR + User system data error + 0 + 1 + + + FAP + FLASH access protection + 1 + 1 + + + nWDT_ATO_EN + WDT auto enable + 2 + 1 + + + nDEPSLP_RST + Deepsleep reset + 3 + 1 + + + nSTDBY_RST + Standby reset + 4 + 1 + + + BTOPT + boot option + 5 + 1 + + + nWDT_DEPSLP + WDT deep sleep + 7 + 1 + + + nWDT_STDBY + WDT standby + 8 + 1 + + + USER_D0 + User data 0 + 10 + 8 + + + USER_D1 + User data 1 + 18 + 8 + + + + + EPPS0 + EPPS0 + Erase/program protection status register 0 + 0x20 + 0x20 + read-only + 0xFFFFFFFF + + + EPPS + Erase/program protection status + 0 + 32 + + + + + EPPS1 + EPPS1 + Erase/program protection status register 1 + 0x2C + 0x20 + read-only + 0xFFFFFFFF + + + EPPS + Erase/program protection status + 0 + 32 + + + + + UNLOCK2 + UNLOCK2 + Unlock 2 register + 0x44 + 0x20 + write-only + 0x00000000 + + + UKVAL + Unlock key value + 0 + 32 + + + + + STS2 + STS2 + Status 2 register + 0x4C + 0x20 + 0x00000000 + + + OBF + Operate busy flag + 0 + 1 + read-only + + + PRGMERR + program error + 2 + 1 + read-write + + + EPPERR + Erase/program protection error + 4 + 1 + read-write + + + ODF + Operate done flag + 5 + 1 + read-write + + + + + CTRL2 + CTRL2 + Control 2 register + 0x50 + 0x20 + read-write + 0x00000080 + + + FPRGM + Flash program + 0 + 1 + + + SECERS + Sector erase + 1 + 1 + + + BANKERS + Bank erase + 2 + 1 + + + BLKERS + Block erase + 3 + 1 + + + ERSTR + Erasing start + 6 + 1 + + + OPLK + Operation lock + 7 + 1 + + + ERRIE + Error interrupt enable + 10 + 1 + + + ODFIE + Operation done flag interrupt enable + 12 + 1 + + + + + ADDR2 + ADDR2 + Address 2 register + 0x54 + 0x20 + write-only + 0x00000000 + + + FA + Flash Address + 0 + 32 + + + + + CONTR + CONTR + Flash continue read register + 0x58 + 0x20 + read-write + 0x00000080 + + + FCONTR_EN + Flash continue read enable + 31 + 1 + + + + + DIVR + DIVR + Flash divider register + 0x60 + 0x20 + 0x00000022 + + + FDIV + Flash divider + 0 + 2 + read-write + + + FDIV_STS + Flash divider status + 4 + 2 + read-only + + + + + SLIB_STS2 + SLIB_STS2 + sLib status 2 register + 0xC8 + 0x20 + 0x0000FFFF + + + SLIB_INST_SS + sLib instruction start sector + 0 + 16 + read-only + + + + + SLIB_STS0 + SLIB_STS0 + sLib status 0 register + 0xCC + 0x20 + 0x00000000 + + + SLIB_ENF + sLib enabled flag + 3 + 1 + read-only + + + + + SLIB_STS1 + SLIB_STS1 + sLib status 1 register + 0xD0 + 0x20 + 0xFFFFFFFF + + + SLIB_SS + sLib start sector + 0 + 16 + read-only + + + SLIB_ES + sLib end sector + 16 + 16 + read-only + + + + + SLIB_PWD_CLR + SLIB_PWD_CLR + SLIB password clear register + 0xD4 + 0x20 + 0x00000000 + write-only + + + SLIB_PCLR_VAL + sLib password clear value + 0 + 32 + + + + + SLIB_MISC_STS + SLIB_MISC_STS + sLib misc status register + 0xD8 + 0x20 + 0x01000000 + + + SLIB_PWD_ERR + sLib password error + 0 + 1 + read-only + + + SLIB_PWD_OK + sLib password ok + 1 + 1 + read-only + + + SLIB_ULKF + sLib unlock flag + 2 + 1 + read-only + + + SLIB_RCNT + sLib remaining count + 16 + 9 + read-only + + + + + SLIB_SET_PWD + SLIB_SET_PWD + sLib password setting register + 0xDC + 0x20 + 0x00000000 + write-only + + + SLIB_PSET_VAL + sLib password setting val + 0 + 32 + + + + + SLIB_SET_RANGE0 + SLIB_SET_RANGE0 + Configure sLib range register 0 + 0xE0 + 0x20 + 0x00000000 + write-only + + + SLIB_SS_SET + sLib start sector setting + 0 + 16 + + + SLIB_ES_SET + sLib end sector setting + 16 + 16 + + + + + SLIB_SET_RANGE1 + SLIB_SET_RANGE1 + Configure sLib range register 1 + 0xE4 + 0x20 + 0x00000000 + write-only + + + SLIB_ISS_SET + sLib instruction start sector setting + 0 + 16 + + + SET_SLIB_STRT + sLib start setting + 31 + 1 + + + + + SLIB_UNLOCK + SLIB_UNLOCK + sLib unlock register + 0xF0 + 0x20 + 0x00000000 + write-only + + + SLIB_UKVAL + sLib unlock key value + 0 + 32 + + + + + CRC_CTRL + CRC_CTRL + CRC controler register + 0xF4 + 0x20 + 0x00000000 + write-only + + + CRC_SS + CRC start sector + 0 + 12 + + + CRC_SN + CRC sector numbler + 12 + 12 + + + CRC_STRT + CRC start + 31 + 1 + + + + + CRC_CHKR + CRC_CHKR + CRC check result register + 0xF8 + 0x20 + 0x00000000 + read-only + + + CRC_CHKR + CRC check result + 0 + 32 + + + + + + + NVIC + Nested Vectored Interrupt + Controller + NVIC + 0xE000E000 + + 0x0 + 0x1001 + registers + + + + ICTR + ICTR + Interrupt Controller Type + Register + 0x4 + 0x20 + read-only + 0x00000000 + + + INTLINESNUM + Total number of interrupt lines in + groups + 0 + 4 + + + + + STIR + STIR + Software Triggered Interrupt + Register + 0xF00 + 0x20 + write-only + 0x00000000 + + + INTID + interrupt to be triggered + 0 + 9 + + + + + ISER0 + ISER0 + Interrupt Set-Enable Register + 0x100 + 0x20 + read-write + 0x00000000 + + + SETENA + SETENA + 0 + 32 + + + + + ISER1 + ISER1 + Interrupt Set-Enable Register + 0x104 + 0x20 + read-write + 0x00000000 + + + SETENA + SETENA + 0 + 32 + + + + + ICER0 + ICER0 + Interrupt Clear-Enable + Register + 0x180 + 0x20 + read-write + 0x00000000 + + + CLRENA + CLRENA + 0 + 32 + + + + + ICER1 + ICER1 + Interrupt Clear-Enable + Register + 0x184 + 0x20 + read-write + 0x00000000 + + + CLRENA + CLRENA + 0 + 32 + + + + + ISPR0 + ISPR0 + Interrupt Set-Pending Register + 0x200 + 0x20 + read-write + 0x00000000 + + + SETPEND + SETPEND + 0 + 32 + + + + + ISPR1 + ISPR1 + Interrupt Set-Pending Register + 0x204 + 0x20 + read-write + 0x00000000 + + + SETPEND + SETPEND + 0 + 32 + + + + + ICPR0 + ICPR0 + Interrupt Clear-Pending + Register + 0x280 + 0x20 + read-write + 0x00000000 + + + CLRPEND + CLRPEND + 0 + 32 + + + + + ICPR1 + ICPR1 + Interrupt Clear-Pending + Register + 0x284 + 0x20 + read-write + 0x00000000 + + + CLRPEND + CLRPEND + 0 + 32 + + + + + IABR0 + IABR0 + Interrupt Active Bit Register + 0x300 + 0x20 + read-only + 0x00000000 + + + ACTIVE + ACTIVE + 0 + 32 + + + + + IABR1 + IABR1 + Interrupt Active Bit Register + 0x304 + 0x20 + read-only + 0x00000000 + + + ACTIVE + ACTIVE + 0 + 32 + + + + + IPR0 + IPR0 + Interrupt Priority Register + 0x400 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR1 + IPR1 + Interrupt Priority Register + 0x404 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR2 + IPR2 + Interrupt Priority Register + 0x408 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR3 + IPR3 + Interrupt Priority Register + 0x40C + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR4 + IPR4 + Interrupt Priority Register + 0x410 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR5 + IPR5 + Interrupt Priority Register + 0x414 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR6 + IPR6 + Interrupt Priority Register + 0x418 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR7 + IPR7 + Interrupt Priority Register + 0x41C + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR8 + IPR8 + Interrupt Priority Register + 0x420 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR9 + IPR9 + Interrupt Priority Register + 0x424 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR10 + IPR10 + Interrupt Priority Register + 0x428 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR11 + IPR11 + Interrupt Priority Register + 0x42C + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR12 + IPR12 + Interrupt Priority Register + 0x430 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR13 + IPR13 + Interrupt Priority Register + 0x434 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + IPR14 + IPR14 + Interrupt Priority Register + 0x438 + 0x20 + read-write + 0x00000000 + + + IPR_N0 + IPR_N0 + 0 + 8 + + + IPR_N1 + IPR_N1 + 8 + 8 + + + IPR_N2 + IPR_N2 + 16 + 8 + + + IPR_N3 + IPR_N3 + 24 + 8 + + + + + + + DVP + Digital video parallel interface + DVP + 0x50050000 + + 0x0 + 0x400 + registers + + + DVP + DVP global interrupt + 78 + + + + CTRL + CTRL + Control register + 0x0 + 0x20 + 0x0000 + + + LCDS + Line capture/drop selection + 20 + 1 + read-write + + + LCDC + Line capture/drop control + + 19 + 1 + read-write + + + PCDS + Pixel capture/drop selection + + 18 + 1 + read-write + + + PCDC + Basic pixel capture/drop control + + 16 + 2 + read-write + + + ENA + DVP enable + 14 + 1 + read-write + + + PDL + Pixel data length + 10 + 2 + read-write + + + BFRC + Basic frame rate control + 8 + 2 + read-write + + + VSP + Vertical synchronization + polarity + 7 + 1 + read-write + + + HSP + Horizontal synchronization polarity + + 6 + 1 + read-write + + + CKP + Pixel clock polarity + 5 + 1 + read-write + + + SM + synchronization mode + 4 + 1 + read-write + + + JPEG + JPEG format + 3 + 1 + read-write + + + CRP + Cropping function enable + 2 + 1 + read-write + + + CFM + Capture fire mode + 1 + 1 + read-write + + + CAP + Capture function enable + 0 + 1 + read-write + + + + + STS + STS + status register + 0x4 + 0x20 + read-only + 0x0000 + + + OFNE + Output FIFO Non-empty + 2 + 1 + + + VSYN + Vertical synchronization status + 1 + 1 + + + HSYN + Horizontal synchronization status + 0 + 1 + + + + + ESTS + ESTS + Event status register + 0x8 + 0x20 + read-only + 0x0000 + + + HSES + Horizontal synchronization event status + 4 + 1 + + + VSES + Vertical synchronization event status + 3 + 1 + + + ESEES + Embedded synchronization error event status + + 2 + 1 + + + OVRES + Data FIFO overrun event status + + 1 + 1 + + + CFDES + Capture frame done event status + + 0 + 1 + + + + + IENA + IENA + interrupt enable register + 0xC + 0x20 + read-write + 0x0000 + + + HSIE + Horizontal synchronization interrupt enable + + 4 + 1 + + + VSIE + Vertical synchronization interrupt enablee + + 3 + 1 + + + ESEIE + Embedded synchronization error interrupt + enable + 2 + 1 + + + OVRIE + Data FIFO overrun interrupt enable + + 1 + 1 + + + CFDIE + Capture frame done interrupt enable + + 0 + 1 + + + + + ISTS + ISTS + Interrupt status register + 0x10 + 0x20 + read-only + 0x0000 + + + HSIS + Horizontal synchronization interrupt + status + 4 + 1 + + + VSIS + Vertical synchronization interrupt + status + 3 + 1 + + + ESEIS + Embedded synchronization error + interrupt status + 2 + 1 + + + OVRIS + Data FIFO overrun interrupt + status + 1 + 1 + + + CFDIS + Capture frame done interrupt + status + 0 + 1 + + + + + ICLR + ICLR + Interrupt clear register + 0x14 + 0x20 + write-only + 0x0000 + + + HSIC + Horizontal synchronization + interrupt clear + 4 + 1 + + + VSIC + Vertical synchronization + interrupt clear + 3 + 1 + + + ESEIC + Embedded synchronization + error interrupt clear + 2 + 1 + + + OVRIC + Data FIFO overrun + interrupt clear + 1 + 1 + + + CFDIC + Capture frame done + interrupt clear + 0 + 1 + + + + + SCR + SCR + Synchronization code + register + 0x18 + 0x20 + read-write + 0x0000 + + + FMEC + Frame end code + 24 + 8 + + + LNEC + Line end code + 16 + 8 + + + LNSC + Line start code + 8 + 8 + + + FMSC + Frame start code + 0 + 8 + + + + + SUR + SUR + Synchronization unmask + register + 0x1C + 0x20 + read-write + 0x0000 + + + FMEU + Frame end unmask + 24 + 8 + + + LNEU + Line end unmask + 16 + 8 + + + LNSU + Line start unmask + + 8 + 8 + + + FMSU + Frame start unmask + + 0 + 8 + + + + + CWST + CWST + Crop window start + 0x20 + 0x20 + read-write + 0x0000 + + + CVSTR + Cropping window vertical start line + + 16 + 13 + + + CHSTR + Cropping window horizontal start pixel + + 0 + 14 + + + + + CWSZ + CWSZ + Crop window size + 0x24 + 0x20 + read-write + 0x0000 + + + CVNUM + Cropping window vertical line number + + 16 + 14 + + + CHNUM + Cropping window horizontal pixel number + + 0 + 14 + + + + + DT + DT + Data register + 0x28 + 0x20 + read-only + 0x0000 + + + DT + Data Port + 0 + 32 + + + + + ACTRL + ACTRL + Advanced Control register + + 0x40 + 0x20 + read-write + 0x0000 + + + VSEID + Vertical synchonization event and interrupt + definition + 17 + 1 + + + HSEID + Horizontal synchonization event and interrupt + definition + 16 + 1 + + + DMABT + DMA burst transfer configuration + + 12 + 1 + + + IDUS + Input data un-used setting + + 10 + 1 + + + IDUN + Input data un-used number + + 8 + 2 + + + EFDM + Enhanced function data format management + + 6 + 1 + + + EFDF + Enhanced function data format + + 4 + 2 + + + PCDES + Basic pixel capture/drop extended + selection + 3 + 1 + + + MIBE + Monochrome image binarization + enable + 2 + 1 + + + EFRCE + Enhanced frame rate control + enable + 1 + 1 + + + EISRE + Enhanced image scaling resize + enable + 0 + 1 + + + + + HSCF + HSCF + Horizontal scaling control flow + + 0x48 + 0x20 + read-write + 0x0000 + + + HSRTF + Horizontal scaling resize target factor + + 16 + 13 + + + HSRSF + Horizontal scaling resize source factor + + 0 + 13 + + + + + VSCF + VSCF + Vertical scaling control flow + + 0x4C + 0x20 + read-write + 0x0000 + + + VSRTF + Vertical scaling resize target factor + + 16 + 13 + + + VSRSF + Vertical scaling resize source factor + + 0 + 13 + + + + + FRF + FRF + Frame rate flow + + 0x50 + 0x20 + read-write + 0x0000 + + + EFRCTF + Enhanced frame rate control target factor + + 8 + 5 + + + EFRCSF + Enhanced frame rate contorl source factor + + 0 + 5 + + + + + BTH + BTH + Binarization threshold + + 0x54 + 0x20 + read-write + 0x0000 + + + MIBTHD + Monochrome image binarization threshold + + 0 + 8 + + + + + + + USB_OTG1_GLOBAL + USB on-the-go full speed + USB_OTG1 + 0x50000000 + + 0x0 + 0x400 + registers + + + OTGFS1 + USB On The Go FS global + interrupt + 67 + + + + GOTGCTL + GOTGCTL + OTGFS control and status register + (OTGFS_GOTGCTL) + 0x0 + 0x20 + 0x00000800 + + + CONIDSTS + Connector ID status + 16 + 1 + read-only + + + CURMOD + Current Mode of Operation + 21 + 1 + read-only + + + + + GOTGINT + GOTGINT + OTGFS interrupt register + (OTGFS_GOTGINT) + 0x4 + 0x20 + 0x00000000 + + + SESENDDET + VBUS is deasserted + 2 + 1 + read-write + + + + + GAHBCFG + GAHBCFG + OTGFS AHB configuration register + (OTGFS_GAHBCFG) + 0x8 + 0x20 + read-write + 0x00000000 + + + GLBINTMSK + Global interrupt mask + 0 + 1 + + + NPTXFEMPLVL + Non-Periodic TxFIFO empty level + 7 + 1 + + + PTXFEMPLVL + Periodic TxFIFO empty + level + 8 + 1 + + + + + GUSBCFG + GUSBCFG + USB configuration register + (OTGFS_GUSBCFG) + 0xC + 0x20 + 0x00000A00 + + + TOUTCAL + FS timeout calibration + 0 + 3 + read-write + + + USBTRDTIM + USB turnaround time + 10 + 4 + read-write + + + FHSTMODE + Force host mode + 29 + 1 + read-write + + + FDEVMODE + Force device mode + 30 + 1 + read-write + + + COTXPKT + Corrupt Tx packet + 31 + 1 + read-write + + + + + GRSTCTL + GRSTCTL + OTGFS reset register + (OTGFS_GRSTCTL) + 0x10 + 0x20 + 0x20000000 + + + CSFTRST + Core soft reset + 0 + 1 + read-write + + + PIUSFTRST + PIU FS Dedicated Controller Soft Reset + 1 + 1 + read-write + + + FRMCNTRST + Host frame counter reset + 2 + 1 + read-write + + + RXFFLSH + RxFIFO flush + 4 + 1 + read-write + + + TXFFLSH + TxFIFO flush + 5 + 1 + read-write + + + TXFNUM + TxFIFO number + 6 + 5 + read-write + + + AHBIDLE + AHB master idle + 31 + 1 + read-only + + + + + GINTSTS + GINTSTS + OTGFS core interrupt register + (OTGFS_GINTSTS) + 0x14 + 0x20 + 0x04000020 + + + CURMOD + Current mode of operation + 0 + 1 + read-only + + + MODEMIS + Mode mismatch interrupt + 1 + 1 + read-write + + + OTGINT + OTG interrupt + 2 + 1 + read-only + + + SOF + Start of frame + 3 + 1 + read-write + + + RXFLVL + RxFIFO non-empty + 4 + 1 + read-only + + + NPTXFEMP + Non-periodic TxFIFO empty + 5 + 1 + read-only + + + GINNAKEFF + Global IN non-periodic NAK + effective + 6 + 1 + read-only + + + GOUTNAKEFF + Global OUT NAK effective + 7 + 1 + read-only + + + ERLYSUSP + Early suspend + 10 + 1 + read-write + + + USBSUSP + USB suspend + 11 + 1 + read-write + + + USBRST + USB reset + 12 + 1 + read-write + + + ENUMDONE + Enumeration done + 13 + 1 + read-write + + + ISOOUTDROP + Isochronous OUT packet dropped + interrupt + 14 + 1 + read-write + + + EOPF + End of periodic frame + interrupt + 15 + 1 + read-write + + + IEPTINT + IN endpoint interrupt + 18 + 1 + read-only + + + OEPTINT + OUT endpoint interrupt + 19 + 1 + read-only + + + INCOMPISOIN + Incomplete isochronous IN + transfer + 20 + 1 + read-write + + + INCOMPIP_INCOMPISOOUT + Incomplete periodic transfer(Host + mode)/Incomplete isochronous OUT transfer(Device + mode) + 21 + 1 + read-write + + + PRTINT + Host port interrupt + 24 + 1 + read-only + + + HCHINT + Host channels interrupt + 25 + 1 + read-only + + + PTXFEMP + Periodic TxFIFO empty + 26 + 1 + read-only + + + CONIDSCHG + Connector ID status change + 28 + 1 + read-write + + + DISCONINT + Disconnect detected + interrupt + 29 + 1 + read-write + + + WKUPINT + Resume/remote wakeup detected + interrupt + 31 + 1 + read-write + + + + + GINTMSK + GINTMSK + OTG_FS interrupt mask register + (OTG_FS_GINTMSK) + 0x18 + 0x20 + 0x00000000 + + + MODEMISMSK + Mode mismatch interrupt + mask + 1 + 1 + read-write + + + OTGINTMSK + OTG interrupt mask + 2 + 1 + read-write + + + SOFMSK + Start of frame mask + 3 + 1 + read-write + + + RXFLVLMSK + Receive FIFO non-empty + mask + 4 + 1 + read-write + + + NPTXFEMPMSK + Non-periodic TxFIFO empty + mask + 5 + 1 + read-write + + + GINNAKEFFMSK + Global non-periodic IN NAK effective + mask + 6 + 1 + read-write + + + GOUTNAKEFFMSK + Global OUT NAK effective + mask + 7 + 1 + read-write + + + ERLYSUSPMSK + Early suspend mask + 10 + 1 + read-write + + + USBSUSPMSK + USB suspend mask + 11 + 1 + read-write + + + USBRSTMSK + USB reset mask + 12 + 1 + read-write + + + ENUMDONEMSK + Enumeration done mask + 13 + 1 + read-write + + + ISOOUTDROPMSK + Isochronous OUT packet dropped interrupt + mask + 14 + 1 + read-write + + + EOPFMSK + End of periodic frame interrupt + mask + 15 + 1 + read-write + + + IEPTINTMSK + IN endpoints interrupt + mask + 18 + 1 + read-write + + + OEPTINTMSK + OUT endpoints interrupt + mask + 19 + 1 + read-write + + + INCOMISOINMSK + Incomplete isochronous IN transfer + mask + 20 + 1 + read-write + + + INCOMPIP_INCOMPISOOUTMSK + Incomplete periodic transfer mask(Host + mode)/Incomplete isochronous OUT transfer mask(Device + mode) + 21 + 1 + read-write + + + PRTINTMSK + Host port interrupt mask + 24 + 1 + read-write + + + HCHINTMSK + Host channels interrupt + mask + 25 + 1 + read-write + + + PTXFEMPMSK + Periodic TxFIFO empty mask + 26 + 1 + read-write + + + CONIDSCHGMSK + Connector ID status change + mask + 28 + 1 + read-write + + + DISCONINTMSK + Disconnect detected interrupt + mask + 29 + 1 + read-write + + + WKUPINTMSK + Resume/remote wakeup detected interrupt + mask + 31 + 1 + read-write + + + + + GRXSTSR_Device + GRXSTSR_Device + OTGFS Receive status debug read(Device + mode) + 0x1C + 0x20 + read-only + 0x00000000 + + + EPTNUM + Endpoint number + 0 + 4 + + + BCNT + Byte count + 4 + 11 + + + DPID + Data PID + 15 + 2 + + + PKTSTS + Packet status + 17 + 4 + + + FN + Frame number + 21 + 4 + + + + + GRXSTSR_Host + GRXSTSR_Host + OTGFS Receive status debug read(Host + mode) + GRXSTSR_Device + 0x1C + 0x20 + read-only + 0x00000000 + + + CHNUM + Channel number + 0 + 4 + + + BCNT + Byte count + 4 + 11 + + + DPID + Data PID + 15 + 2 + + + PKTSTS + Packet status + 17 + 4 + + + + + GRXFSIZ + GRXFSIZ + OTGFS Receive FIFO size register + (OTGFS_GRXFSIZ) + 0x24 + 0x20 + read-write + 0x00000200 + + + RXFDEP + RxFIFO depth + 0 + 16 + + + + + DIEPTXF0 + DIEPTXF0 + IN Endpoint TxFIFO 0 transmit FIFO size + register (Device mode) + 0x28 + 0x20 + read-write + 0x00000200 + + + INEPT0TXSTADDR + Endpoint 0 transmit RAM start + address + 0 + 16 + + + INEPT0TXDEP + Endpoint 0 TxFIFO depth + 16 + 16 + + + + + GNPTXFSIZ + GNPTXFSIZ + OTGFS non-periodic transmit FIFO size + register (Host mode) + DIEPTXF0 + 0x28 + 0x20 + read-write + 0x00000200 + + + NPTXFSTADDR + Non-periodic Transmit RAM Start + address + 0 + 16 + + + NPTXFDEP + Non-periodic TxFIFO depth + 16 + 16 + + + + + GNPTXSTS + GNPTXSTS + OTGFS non-periodic transmit FIFO/queue + status register (OTGFS_GNPTXSTS) + 0x2C + 0x20 + read-only + 0x00080200 + + + NPTXFSPCAVAIL + Non-periodic TxFIFO space + available + 0 + 16 + + + NPTXQSPCAVAIL + Non-periodic transmit request queue + space available + 16 + 8 + + + NPTXQTOP + Top of the non-periodic transmit request + queue + 24 + 7 + + + + + GCCFG + GCCFG + OTGFS general core configuration register + (OTGFS_GCCFG) + 0x38 + 0x20 + read-write + 0x00000000 + + + PWRDOWN + Power down + 16 + 1 + + + LP_MODE + Low power mode + 17 + 1 + + + SOFOUTEN + SOF output enable + 20 + 1 + + + VBUSIG + VBUS Ignored + 21 + 1 + + + + + GUID + GUID + Product ID register + 0x3C + 0x20 + read-write + 0x00001000 + + + USERID + Product ID field + 0 + 32 + + + + + HPTXFSIZ + HPTXFSIZ + OTGFS Host periodic transmit FIFO size + register (OTGFS_HPTXFSIZ) + 0x100 + 0x20 + read-write + 0x02000600 + + + PTXFSTADDR + Host periodic TxFIFO start + address + 0 + 16 + + + PTXFSIZE + Host periodic TxFIFO depth + 16 + 16 + + + + + DIEPTXF1 + DIEPTXF1 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF1) + 0x104 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO1 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF2 + DIEPTXF2 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF2) + 0x108 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO2 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF3 + DIEPTXF3 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF3) + 0x10C + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO3 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF4 + DIEPTXF4 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF4) + 0x110 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO4 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF5 + DIEPTXF5 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF5) + 0x114 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO5 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF6 + DIEPTXF6 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF6) + 0x118 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO6 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF7 + DIEPTXF7 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF7) + 0x11C + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO7 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + + + USB_OTG1_HOST + USB on the go full speed + USB_OTG1 + 0x50000400 + + 0x0 + 0x400 + registers + + + + HCFG + HCFG + OTGFS host configuration register + (OTGFS_HCFG) + 0x0 + 0x20 + 0x00000000 + + + FSLSPCLKSEL + FS/LS PHY clock select + 0 + 2 + read-write + + + FSLSSUPP + FS- and LS-only support + 2 + 1 + read-only + + + + + HFIR + HFIR + OTGFS Host frame interval + register + 0x4 + 0x20 + read-write + 0x0000EA60 + + + FRINT + Frame interval + 0 + 16 + + + + + HFNUM + HFNUM + OTGFS host frame number/frame time + remaining register (OTGFS_HFNUM) + 0x8 + 0x20 + read-only + 0x00003FFF + + + FRNUM + Frame number + 0 + 16 + + + FTREM + Frame time remaining + 16 + 16 + + + + + HPTXSTS + HPTXSTS + OTGFS_Host periodic transmit FIFO/queue + status register (OTGFS_HPTXSTS) + 0x10 + 0x20 + 0x00080100 + + + PTXFSPCAVAIL + Periodic transmit data FIFO space + available + 0 + 16 + read-write + + + PTXQSPCAVAIL + Periodic transmit request queue space + available + 16 + 8 + read-only + + + PTXQTOP + Top of the periodic transmit request + queue + 24 + 8 + read-only + + + + + HAINT + HAINT + OTGFS Host all channels interrupt + register + 0x14 + 0x20 + read-only + 0x00000000 + + + HAINT + Channel interrupts + 0 + 16 + + + + + HAINTMSK + HAINTMSK + OTGFS host all channels interrupt mask + register + 0x18 + 0x20 + read-write + 0x00000000 + + + HAINTMSK + Channel interrupt mask + 0 + 16 + + + + + HPRT + HPRT + OTGFS host port control and status register + (OTGFS_HPRT) + 0x40 + 0x20 + 0x00000000 + + + PRTCONSTS + Port connect status + 0 + 1 + read-only + + + PRTCONDET + Port connect detected + 1 + 1 + read-write + + + PRTENA + Port enable + 2 + 1 + read-write + + + PRTENCHNG + Port enable/disable change + 3 + 1 + read-write + + + PRTOVRCACT + Port overcurrent active + 4 + 1 + read-only + + + PRTOVRCCHNG + Port overcurrent change + 5 + 1 + read-write + + + PRTRES + Port resume + 6 + 1 + read-write + + + PRTSUSP + Port suspend + 7 + 1 + read-write + + + PRTRST + Port reset + 8 + 1 + read-write + + + PRTLNSTS + Port line status + 10 + 2 + read-only + + + PRTPWR + Port power + 12 + 1 + read-write + + + PRTTSTCTL + Port test control + 13 + 4 + read-write + + + PRTSPD + Port speed + 17 + 2 + read-only + + + + + HCCHAR0 + HCCHAR0 + OTGFS host channel-0 characteristics + register (OTGFS_HCCHAR0) + 0x100 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR1 + HCCHAR1 + OTGFS host channel-1 characteristics + register (OTGFS_HCCHAR1) + 0x120 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR2 + HCCHAR2 + OTGFS host channel-2 characteristics + register (OTGFS_HCCHAR2) + 0x140 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR3 + HCCHAR3 + OTGFS host channel-3 characteristics + register (OTGFS_HCCHAR3) + 0x160 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR4 + HCCHAR4 + OTGFS host channel-4 characteristics + register (OTGFS_HCCHAR4) + 0x180 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR5 + HCCHAR5 + OTGFS host channel-5 characteristics + register (OTGFS_HCCHAR5) + 0x1A0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR6 + HCCHAR6 + OTGFS host channel-6 characteristics + register (OTGFS_HCCHAR6) + 0x1C0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR7 + HCCHAR7 + OTGFS host channel-7 characteristics + register (OTGFS_HCCHAR7) + 0x1E0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR8 + HCCHAR8 + OTGFS host channel-8 characteristics + register (OTGFS_HCCHAR8) + 0x200 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR9 + HCCHAR9 + OTGFS host channel-9 characteristics + register (OTGFS_HCCHAR9) + 0x220 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR10 + HCCHAR10 + OTGFS host channel-10 characteristics + register (OTGFS_HCCHAR10) + 0x240 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR11 + HCCHAR11 + OTGFS host channel-7 characteristics + register (OTGFS_HCCHAR11) + 0x260 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR12 + HCCHAR12 + OTGFS host channel-12 characteristics + register (OTGFS_HCCHAR12) + 0x280 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR13 + HCCHAR13 + OTGFS host channel-13 characteristics + register (OTGFS_HCCHAR13) + 0x2A0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR14 + HCCHAR14 + OTGFS host channel-14 characteristics + register (OTGFS_HCCHAR14) + 0x2C0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR15 + HCCHAR15 + OTGFS host channel-15 characteristics + register (OTGFS_HCCHAR15) + 0x2E0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCINT0 + HCINT0 + OTGFS host channel-0 interrupt register + (OTGFS_HCINT0) + 0x108 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT1 + HCINT1 + OTG_FS host channel-1 interrupt register + (OTG_FS_HCINT1) + 0x128 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT2 + HCINT2 + OTGFS host channel-2 interrupt register + (OTGFS_HCINT2) + 0x148 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT3 + HCINT3 + OTGFS host channel-3 interrupt register + (OTGFS_HCINT3) + 0x168 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT4 + HCINT4 + OTGFS host channel-4 interrupt register + (OTGFS_HCINT4) + 0x188 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT5 + HCINT5 + OTGFS host channel-5 interrupt register + (OTGFS_HCINT5) + 0x1A8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT6 + HCINT6 + OTGFS host channel-6 interrupt register + (OTGFS_HCINT6) + 0x1C8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT7 + HCINT7 + OTGFS host channel-7 interrupt register + (OTGFS_HCINT7) + 0x1E8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT8 + HCINT8 + OTGFS host channel-8 interrupt register + (OTGFS_HCINT8) + 0x208 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT9 + HCINT9 + OTGFS host channel-9 interrupt register + (OTGFS_HCINT9) + 0x228 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT10 + HCINT10 + OTGFS host channel-10 interrupt register + (OTGFS_HCINT10) + 0x248 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT11 + HCINT11 + OTGFS host channel-11 interrupt register + (OTGFS_HCINT11) + 0x268 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT12 + HCINT12 + OTGFS host channel-12 interrupt register + (OTGFS_HCINT12) + 0x288 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT13 + HCINT13 + OTGFS host channel-13 interrupt register + (OTGFS_HCINT13) + 0x2A8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT14 + HCINT14 + OTGFS host channel-14 interrupt register + (OTGFS_HCINT14) + 0x2C8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT15 + HCINT15 + OTGFS host channel-15 interrupt register + (OTGFS_HCINT15) + 0x2E8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINTMSK0 + HCINTMSK0 + OTGFS host channel-0 mask register + (OTGFS_HCINTMSK0) + 0x10C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK1 + HCINTMSK1 + OTGFS host channel-1 mask register + (OTGFS_HCINTMSK1) + 0x12C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK2 + HCINTMSK2 + OTGFS host channel-2 mask register + (OTGFS_HCINTMSK2) + 0x14C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK3 + HCINTMSK3 + OTGFS host channel-3 mask register + (OTGFS_HCINTMSK3) + 0x16C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK4 + HCINTMSK4 + OTGFS host channel-4 mask register + (OTGFS_HCINTMSK4) + 0x18C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK5 + HCINTMSK5 + OTGFS host channel-5 mask register + (OTGFS_HCINTMSK5) + 0x1AC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK6 + HCINTMSK6 + OTGFS host channel-6 mask register + (OTGFS_HCINTMSK6) + 0x1CC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK7 + HCINTMSK7 + OTGFS host channel-7 mask register + (OTGFS_HCINTMSK7) + 0x1EC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK8 + HCINTMSK8 + OTGFS host channel-8 mask register + (OTGFS_HCINTMSK8) + 0x20C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK9 + HCINTMSK9 + OTGFS host channel-9 mask register + (OTGFS_HCINTMSK9) + 0x22C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK10 + HCINTMSK10 + OTGFS host channel-10 mask register + (OTGFS_HCINTMSK10) + 0x24C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK11 + HCINTMSK11 + OTGFS host channel-11 mask register + (OTGFS_HCINTMSK11) + 0x26C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK12 + HCINTMSK12 + OTGFS host channel-12 mask register + (OTGFS_HCINTMSK12) + 0x28C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK13 + HCINTMSK13 + OTGFS host channel-13 mask register + (OTGFS_HCINTMSK13) + 0x2AC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK14 + HCINTMSK14 + OTGFS host channel-14 mask register + (OTGFS_HCINTMSK14) + 0x2CC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK15 + HCINTMSK15 + OTGFS host channel-15 mask register + (OTGFS_HCINTMSK15) + 0x2EC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCTSIZ0 + HCTSIZ0 + OTGFS host channel-0 transfer size + register + 0x110 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ1 + HCTSIZ1 + OTGFS host channel-1 transfer size + register + 0x130 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ2 + HCTSIZ2 + OTGFS host channel-2 transfer size + register + 0x150 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ3 + HCTSIZ3 + OTGFS host channel-3 transfer size + register + 0x170 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ4 + HCTSIZ4 + OTGFS host channel-4 transfer size + register + 0x190 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ5 + HCTSIZ5 + OTGFS host channel-5 transfer size + register + 0x1B0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ6 + HCTSIZ6 + OTGFS host channel-6 transfer size + register + 0x1D0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ7 + HCTSIZ7 + OTGFS host channel-7 transfer size + register + 0x1F0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ8 + HCTSIZ8 + OTGFS host channel-8 transfer size + register + 0x210 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ9 + HCTSIZ9 + OTGFS host channel-9 transfer size + register + 0x230 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ10 + HCTSIZ10 + OTGFS host channel-10 transfer size + register + 0x250 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ11 + HCTSIZ11 + OTGFS host channel-11 transfer size + register + 0x270 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ12 + HCTSIZ12 + OTGFS host channel-12 transfer size + register + 0x290 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ13 + HCTSIZ13 + OTGFS host channel-13 transfer size + register + 0x2B0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ14 + HCTSIZ14 + OTGFS host channel-14 transfer size + register + 0x2D0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ15 + HCTSIZ15 + OTGFS host channel-15 transfer size + register + 0x2F0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + + + USB_OTG1_DEVICE + USB on the go full speed + USB_OTG1 + 0x50000800 + + 0x0 + 0x400 + registers + + + + DCFG + DCFG + OTGFS device configuration register + (OTGFS_DCFG) + 0x0 + 0x20 + read-write + 0x02200000 + + + DEVSPD + Device speed + 0 + 2 + + + NZSTSOUTHSHK + Non-zero-length status OUT + handshake + 2 + 1 + + + DEVADDR + Device address + 4 + 7 + + + PERFRINT + Periodic frame interval + 11 + 2 + + + + + DCTL + DCTL + OTGFS device control register + (OTGFS_DCTL) + 0x4 + 0x20 + 0x00000000 + + + RWKUPSIG + Remote wakeup signaling + 0 + 1 + read-write + + + SFTDISCON + Soft disconnect + 1 + 1 + read-write + + + GNPINNAKSTS + Global IN NAK status + 2 + 1 + read-only + + + GOUTNAKSTS + Global OUT NAK status + 3 + 1 + read-only + + + TSTCTL + Test control + 4 + 3 + read-write + + + SGNPINNAK + Set global IN NAK + 7 + 1 + read-write + + + CGNPINNAK + Clear global IN NAK + 8 + 1 + read-write + + + SGOUTNAK + Set global OUT NAK + 9 + 1 + read-write + + + CGOUTNAK + Clear global OUT NAK + 10 + 1 + read-write + + + PWROPRGDNE + Power-on programming done + 11 + 1 + read-write + + + + + DSTS + DSTS + OTGFS device status register + (OTGFS_DSTS) + 0x8 + 0x20 + read-only + 0x00000010 + + + SUSPSTS + Suspend status + 0 + 1 + + + ENUMSPD + Enumerated speed + 1 + 2 + + + ETICERR + Erratic error + 3 + 1 + + + SOFFN + Frame number of the received + SOF + 8 + 14 + + + + + DIEPMSK + DIEPMSK + OTGFS device IN endpoint common interrupt + mask register (OTGFS_DIEPMSK) + 0x10 + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed interrupt + mask + 0 + 1 + + + EPTDISMSK + Endpoint disabled interrupt + mask + 1 + 1 + + + TIMEOUTMSK + Timeout condition mask (Non-isochronous + endpoints) + 3 + 1 + + + INTKNTXFEMPMSK + IN token received when TxFIFO empty + mask + 4 + 1 + + + INTKNEPTMISMSK + IN token received with EP mismatch + mask + 5 + 1 + + + INEPTNAKMSK + IN endpoint NAK effective + mask + 6 + 1 + + + TXFIFOUDRMSK + FIFO underrun + mask + 8 + 1 + + + BNAINMSK + BNA interrupt + mask + 9 + 1 + + + + + DOEPMSK + DOEPMSK + OTGFS device OUT endpoint common interrupt + mask register (OTGFS_DOEPMSK) + 0x14 + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed interrupt + mask + 0 + 1 + + + EPTDISMSK + Endpoint disabled interrupt + mask + 1 + 1 + + + SETUPMSK + SETUP phase done mask + 3 + 1 + + + OUTTEPDMSK + OUT token received when endpoint + disabled mask + 4 + 1 + + + B2BSETUPMSK + Back-to-back SETUP packets + received mask + 6 + 1 + + + OUTPERRMSK + OUT packet error + mask + 8 + 1 + + + BNAOUTMSK + BNA interrupt + mask + 9 + 1 + + + + + DAINT + DAINT + OTGFS device all endpoints interrupt + register (OTGFS_DAINT) + 0x18 + 0x20 + read-only + 0x00000000 + + + INEPTINT + IN endpoint interrupt bits + 0 + 16 + + + OUTEPTINT + OUT endpoint interrupt + bits + 16 + 16 + + + + + DAINTMSK + DAINTMSK + OTGFS all endpoints interrupt mask register + (OTGFS_DAINTMSK) + 0x1C + 0x20 + read-write + 0x00000000 + + + INEPTMSK + IN EP interrupt mask bits + 0 + 16 + + + OUTEPTMSK + OUT endpoint interrupt + bits + 16 + 16 + + + + + DIEPEMPMSK + DIEPEMPMSK + OTGFS device IN endpoint FIFO empty + interrupt mask register + 0x34 + 0x20 + read-write + 0x00000000 + + + INEPTXFEMSK + IN EP Tx FIFO empty interrupt mask + bits + 0 + 16 + + + + + DIEPCTL0 + DIEPCTL0 + OTGFS device control IN endpoint 0 control + register (OTGFS_DIEPCTL0) + 0x100 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 2 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-only + + + EPTENA + Endpoint enable + 31 + 1 + read-only + + + + + DIEPCTL1 + DIEPCTL1 + OTGFS device IN endpoint-1 control + register + 0x120 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL2 + DIEPCTL2 + OTGFS device IN endpoint-2 control + register + 0x140 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL3 + DIEPCTL3 + OTGFS device IN endpoint-3 control + register + 0x160 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL4 + DIEPCTL4 + OTGFS device IN endpoint-4 control + register + 0x180 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL5 + DIEPCTL5 + OTGFS device IN endpoint-5 control + register + 0x1A0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL6 + DIEPCTL6 + OTGFS device IN endpoint-6 control + register + 0x1C0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL7 + DIEPCTL7 + OTGFS device IN endpoint-7 control + register + 0x1E0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL0 + DOEPCTL0 + OTGFS device OUT endpoint-0 control + register + 0x300 + 0x20 + 0x00008000 + + + MPS + Maximum packet size + 0 + 2 + read-only + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL1 + DOEPCTL1 + OTGFS device OUT endpoint-1 control + register + 0x320 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL2 + DOEPCTL2 + OTGFS device OUT endpoint-2 control + register + 0x340 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL3 + DOEPCTL3 + OTGFS device OUT endpoint-3 control + register + 0x360 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL4 + DOEPCTL4 + OTGFS device OUT endpoint-4 control + register + 0x380 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL5 + DOEPCTL5 + OTGFS device OUT endpoint-5 control + register + 0x3A0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL6 + DOEPCTL6 + OTGFS device OUT endpoint-6 control + register + 0x3C0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL7 + DOEPCTL7 + OTGFS device OUT endpoint-7 control + register + 0x3E0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPINT0 + DIEPINT0 + OTGFS device IN endpoint-0 interrupt + register + 0x108 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT1 + DIEPINT1 + OTGFS device IN endpoint-1 interrupt + register + 0x128 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT2 + DIEPINT2 + OTGFS device IN endpoint-2 interrupt + register + 0x148 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT3 + DIEPINT3 + OTGFS device IN endpoint-3 interrupt + register + 0x168 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT4 + DIEPINT4 + OTGFS device IN endpoint-4 interrupt + register + 0x188 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT5 + DIEPINT5 + OTGFS device IN endpoint-5 interrupt + register + 0x1A8 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT6 + DIEPINT6 + OTGFS device IN endpoint-6 interrupt + register + 0x1C8 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT7 + DIEPINT7 + OTGFS device IN endpoint-7 interrupt + register + 0x1E8 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DOEPINT0 + DOEPINT0 + OTGFS device OUT endpoint-0 interrupt + register + 0x308 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT1 + DOEPINT1 + OTGFS device OUT endpoint-1 interrupt + register + 0x328 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT2 + DOEPINT2 + OTGFS device OUT endpoint-2 interrupt + register + 0x348 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT3 + DOEPINT3 + OTGFS device OUT endpoint-3 interrupt + register + 0x368 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT4 + DOEPINT4 + OTGFS device OUT endpoint-4 interrupt + register + 0x388 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT5 + DOEPINT5 + OTGFS device OUT endpoint-5 interrupt + register + 0x3A8 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT6 + DOEPINT6 + OTGFS device OUT endpoint-6 interrupt + register + 0x3C8 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT7 + DOEPINT7 + OTGFS device OUT endpoint-7 interrupt + register + 0x3E8 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DIEPTSIZ0 + DIEPTSIZ0 + OTGFS device IN endpoint-0 transfer size + register + 0x110 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 7 + + + PKTCNT + Packet count + 19 + 2 + + + + + DOEPTSIZ0 + DOEPTSIZ0 + OTGFS device OUT endpoint-0 transfer size + register + 0x310 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 7 + + + PKTCNT + Packet count + 19 + 1 + + + SETUPCNT + SETUP packet count + 29 + 2 + + + + + DIEPTSIZ1 + DIEPTSIZ1 + OTGFS device IN endpoint-1 transfer size + register + 0x130 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ2 + DIEPTSIZ2 + OTGFS device IN endpoint-2 transfer size + register + 0x150 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ3 + DIEPTSIZ3 + OTG device IN endpoint-3 transfer size + register + 0x170 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ4 + DIEPTSIZ4 + OTG device IN endpoint-4 transfer size + register + 0x190 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ5 + DIEPTSIZ5 + OTG device IN endpoint-5 transfer size + register + 0x1B0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ6 + DIEPTSIZ6 + OTG device IN endpoint-6 transfer size + register + 0x1D0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ7 + DIEPTSIZ7 + OTG device IN endpoint-7 transfer size + register + 0x1F0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DTXFSTS0 + DTXFSTS0 + OTGFS device IN endpoint-0 transmit FIFO + status register + 0x118 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS1 + DTXFSTS1 + OTGFS device IN endpoint-1 transmit FIFO + status register + 0x138 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS2 + DTXFSTS2 + OTGFS device IN endpoint-2 transmit FIFO + status register + 0x158 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS3 + DTXFSTS3 + OTGFS device IN endpoint-3 transmit FIFO + status register + 0x178 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS4 + DTXFSTS4 + OTGFS device IN endpoint-4 transmit FIFO + status register + 0x198 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS5 + DTXFSTS5 + OTGFS device IN endpoint-5 transmit FIFO + status register + 0x1B8 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS6 + DTXFSTS6 + OTGFS device IN endpoint-6 transmit FIFO + status register + 0x1D8 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS7 + DTXFSTS7 + OTGFS device IN endpoint-7 transmit FIFO + status register + 0x1F8 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DOEPTSIZ1 + DOEPTSIZ1 + OTGFS device OUT endpoint-1 transfer size + register + 0x330 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ2 + DOEPTSIZ2 + OTGFS device OUT endpoint-2 transfer size + register + 0x350 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ3 + DOEPTSIZ3 + OTGFS device OUT endpoint-3 transfer size + register + 0x370 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ4 + DOEPTSIZ4 + OTGFS device OUT endpoint-4 transfer size + register + 0x390 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ5 + DOEPTSIZ5 + OTGFS device OUT endpoint-5 transfer size + register + 0x3B0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ6 + DOEPTSIZ6 + OTGFS device OUT endpoint-6 transfer size + register + 0x3D0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ7 + DOEPTSIZ7 + OTGFS device OUT endpoint-7 transfer size + register + 0x3F0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + + + USB_OTG1_PWRCLK + USB on the go full speed + USB_OTG1 + 0x50000E00 + + 0x0 + 0x400 + registers + + + + PCGCCTL + PCGCCTL + OTGFS power and clock gating control + register (OTGFS_PCGCCTL) + 0x0 + 0x20 + 0x00000000 + + + STOPPCLK + Stop PHY clock + 0 + 1 + read-write + + + SUSPENDM + PHY Suspended + 4 + 1 + read-only + + + + + + + USB_OTG2_GLOBAL + USB on the go full speed + USB_OTG2 + 0x40040000 + + 0x0 + 0x400 + registers + + + OTGFS2 + USB On The Go FS2 global + interrupt + 77 + + + + GOTGCTL + GOTGCTL + OTGFS control and status register + (OTGFS_GOTGCTL) + 0x0 + 0x20 + 0x00000800 + + + CONIDSTS + Connector ID status + 16 + 1 + read-only + + + CURMOD + Current Mode of Operation + 21 + 1 + read-only + + + + + GOTGINT + GOTGINT + OTGFS interrupt register + (OTGFS_GOTGINT) + 0x4 + 0x20 + 0x00000000 + + + SESENDDET + VBUS is deasserted + 2 + 1 + read-write + + + + + GAHBCFG + GAHBCFG + OTGFS AHB configuration register + (OTGFS_GAHBCFG) + 0x8 + 0x20 + read-write + 0x00000000 + + + GLBINTMSK + Global interrupt mask + 0 + 1 + + + NPTXFEMPLVL + Non-Periodic TxFIFO empty level + 7 + 1 + + + PTXFEMPLVL + Periodic TxFIFO empty + level + 8 + 1 + + + + + GUSBCFG + GUSBCFG + USB configuration register + (OTGFS_GUSBCFG) + 0xC + 0x20 + 0x00000A00 + + + TOUTCAL + FS timeout calibration + 0 + 3 + read-write + + + USBTRDTIM + USB turnaround time + 10 + 4 + read-write + + + FHSTMODE + Force host mode + 29 + 1 + read-write + + + FDEVMODE + Force device mode + 30 + 1 + read-write + + + COTXPKT + Corrupt Tx packet + 31 + 1 + read-write + + + + + GRSTCTL + GRSTCTL + OTGFS reset register + (OTGFS_GRSTCTL) + 0x10 + 0x20 + 0x20000000 + + + CSFTRST + Core soft reset + 0 + 1 + read-write + + + PIUSFTRST + PIU FS Dedicated Controller Soft Reset + 1 + 1 + read-write + + + FRMCNTRST + Host frame counter reset + 2 + 1 + read-write + + + RXFFLSH + RxFIFO flush + 4 + 1 + read-write + + + TXFFLSH + TxFIFO flush + 5 + 1 + read-write + + + TXFNUM + TxFIFO number + 6 + 5 + read-write + + + AHBIDLE + AHB master idle + 31 + 1 + read-only + + + + + GINTSTS + GINTSTS + OTGFS core interrupt register + (OTGFS_GINTSTS) + 0x14 + 0x20 + 0x04000020 + + + CURMOD + Current mode of operation + 0 + 1 + read-only + + + MODEMIS + Mode mismatch interrupt + 1 + 1 + read-write + + + OTGINT + OTG interrupt + 2 + 1 + read-only + + + SOF + Start of frame + 3 + 1 + read-write + + + RXFLVL + RxFIFO non-empty + 4 + 1 + read-only + + + NPTXFEMP + Non-periodic TxFIFO empty + 5 + 1 + read-only + + + GINNAKEFF + Global IN non-periodic NAK + effective + 6 + 1 + read-only + + + GOUTNAKEFF + Global OUT NAK effective + 7 + 1 + read-only + + + ERLYSUSP + Early suspend + 10 + 1 + read-write + + + USBSUSP + USB suspend + 11 + 1 + read-write + + + USBRST + USB reset + 12 + 1 + read-write + + + ENUMDONE + Enumeration done + 13 + 1 + read-write + + + ISOOUTDROP + Isochronous OUT packet dropped + interrupt + 14 + 1 + read-write + + + EOPF + End of periodic frame + interrupt + 15 + 1 + read-write + + + IEPTINT + IN endpoint interrupt + 18 + 1 + read-only + + + OEPTINT + OUT endpoint interrupt + 19 + 1 + read-only + + + INCOMPISOIN + Incomplete isochronous IN + transfer + 20 + 1 + read-write + + + INCOMPIP_INCOMPISOOUT + Incomplete periodic transfer(Host + mode)/Incomplete isochronous OUT transfer(Device + mode) + 21 + 1 + read-write + + + PRTINT + Host port interrupt + 24 + 1 + read-only + + + HCHINT + Host channels interrupt + 25 + 1 + read-only + + + PTXFEMP + Periodic TxFIFO empty + 26 + 1 + read-only + + + CONIDSCHG + Connector ID status change + 28 + 1 + read-write + + + DISCONINT + Disconnect detected + interrupt + 29 + 1 + read-write + + + WKUPINT + Resume/remote wakeup detected + interrupt + 31 + 1 + read-write + + + + + GINTMSK + GINTMSK + OTG_FS interrupt mask register + (OTG_FS_GINTMSK) + 0x18 + 0x20 + 0x00000000 + + + MODEMISMSK + Mode mismatch interrupt + mask + 1 + 1 + read-write + + + OTGINTMSK + OTG interrupt mask + 2 + 1 + read-write + + + SOFMSK + Start of frame mask + 3 + 1 + read-write + + + RXFLVLMSK + Receive FIFO non-empty + mask + 4 + 1 + read-write + + + NPTXFEMPMSK + Non-periodic TxFIFO empty + mask + 5 + 1 + read-write + + + GINNAKEFFMSK + Global non-periodic IN NAK effective + mask + 6 + 1 + read-write + + + GOUTNAKEFFMSK + Global OUT NAK effective + mask + 7 + 1 + read-write + + + ERLYSUSPMSK + Early suspend mask + 10 + 1 + read-write + + + USBSUSPMSK + USB suspend mask + 11 + 1 + read-write + + + USBRSTMSK + USB reset mask + 12 + 1 + read-write + + + ENUMDONEMSK + Enumeration done mask + 13 + 1 + read-write + + + ISOOUTDROPMSK + Isochronous OUT packet dropped interrupt + mask + 14 + 1 + read-write + + + EOPFMSK + End of periodic frame interrupt + mask + 15 + 1 + read-write + + + IEPTINTMSK + IN endpoints interrupt + mask + 18 + 1 + read-write + + + OEPTINTMSK + OUT endpoints interrupt + mask + 19 + 1 + read-write + + + INCOMISOINMSK + Incomplete isochronous IN transfer + mask + 20 + 1 + read-write + + + INCOMPIP_INCOMPISOOUTMSK + Incomplete periodic transfer mask(Host + mode)/Incomplete isochronous OUT transfer mask(Device + mode) + 21 + 1 + read-write + + + PRTINTMSK + Host port interrupt mask + 24 + 1 + read-only + + + HCHINTMSK + Host channels interrupt + mask + 25 + 1 + read-write + + + PTXFEMPMSK + Periodic TxFIFO empty mask + 26 + 1 + read-write + + + CONIDSCHGMSK + Connector ID status change + mask + 28 + 1 + read-write + + + DISCONINTMSK + Disconnect detected interrupt + mask + 29 + 1 + read-write + + + WKUPINTMSK + Resume/remote wakeup detected interrupt + mask + 31 + 1 + read-write + + + + + GRXSTSR_Device + GRXSTSR_Device + OTGFS Receive status debug read(Device + mode) + 0x1C + 0x20 + read-only + 0x00000000 + + + EPTNUM + Endpoint number + 0 + 4 + + + BCNT + Byte count + 4 + 11 + + + DPID + Data PID + 15 + 2 + + + PKTSTS + Packet status + 17 + 4 + + + FN + Frame number + 21 + 4 + + + + + GRXSTSR_Host + GRXSTSR_Host + OTGFS Receive status debug read(Host + mode) + GRXSTSR_Device + 0x1C + 0x20 + read-only + 0x00000000 + + + CHNUM + Channel number + 0 + 4 + + + BCNT + Byte count + 4 + 11 + + + DPID + Data PID + 15 + 2 + + + PKTSTS + Packet status + 17 + 4 + + + + + GRXFSIZ + GRXFSIZ + OTGFS Receive FIFO size register + (OTGFS_GRXFSIZ) + 0x24 + 0x20 + read-write + 0x00000200 + + + RXFDEP + RxFIFO depth + 0 + 16 + + + + + DIEPTXF0 + DIEPTXF0 + IN Endpoint TxFIFO 0 transmit FIFO size + register (Device mode) + 0x28 + 0x20 + read-write + 0x00000200 + + + INEPT0TXSTADDR + Endpoint 0 transmit RAM start + address + 0 + 16 + + + INEPT0TXDEP + Endpoint 0 TxFIFO depth + 16 + 16 + + + + + GNPTXFSIZ + GNPTXFSIZ + OTGFS non-periodic transmit FIFO size + register (Host mode) + DIEPTXF0 + 0x28 + 0x20 + read-write + 0x00000200 + + + NPTXFSTADDR + Non-periodic Transmit RAM Start + address + 0 + 16 + + + NPTXFDEP + Non-periodic TxFIFO depth + 16 + 16 + + + + + GNPTXSTS + GNPTXSTS + OTGFS non-periodic transmit FIFO/queue + status register (OTGFS_GNPTXSTS) + 0x2C + 0x20 + read-only + 0x00080200 + + + NPTXFSPCAVAIL + Non-periodic TxFIFO space + available + 0 + 16 + + + NPTXQSPCAVAIL + Non-periodic transmit request queue + space available + 16 + 8 + + + NPTXQTOP + Top of the non-periodic transmit request + queue + 24 + 7 + + + + + GCCFG + GCCFG + OTGFS general core configuration register + (OTGFS_GCCFG) + 0x38 + 0x20 + read-write + 0x00000000 + + + PWRDOWN + Power down + 16 + 1 + + + LP_MODE + Low power mode + 17 + 1 + + + SOFOUTEN + SOF output enable + 20 + 1 + + + VBUSIG + VBUS Ignored + 21 + 1 + + + + + GUID + GUID + Product ID register + 0x3C + 0x20 + read-write + 0x00001000 + + + USERID + Product ID field + 0 + 32 + + + + + HPTXFSIZ + HPTXFSIZ + OTGFS Host periodic transmit FIFO size + register (OTGFS_HPTXFSIZ) + 0x100 + 0x20 + read-write + 0x02000600 + + + PTXFSTADDR + Host periodic TxFIFO start + address + 0 + 16 + + + PTXFSIZE + Host periodic TxFIFO depth + 16 + 16 + + + + + DIEPTXF1 + DIEPTXF1 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF1) + 0x104 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO1 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF2 + DIEPTXF2 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF2) + 0x108 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO2 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF3 + DIEPTXF3 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF3) + 0x10C + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO3 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF4 + DIEPTXF4 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF4) + 0x110 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO4 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF5 + DIEPTXF5 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF5) + 0x114 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO5 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF6 + DIEPTXF6 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF6) + 0x118 + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO6 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + DIEPTXF7 + DIEPTXF7 + OTGFS device IN endpoint transmit FIFO size + register (OTGFS_DIEPTXF7) + 0x11C + 0x20 + read-write + 0x02000400 + + + INEPTXFSTADDR + IN endpoint FIFO7 transmit RAM start + address + 0 + 16 + + + INEPTXFDEP + IN endpoint TxFIFO depth + 16 + 16 + + + + + + + USB_OTG2_HOST + USB on the go full speed + USB_OTG2 + 0x40040400 + + 0x0 + 0x400 + registers + + + + HCFG + HCFG + OTGFS host configuration register + (OTGFS_HCFG) + 0x0 + 0x20 + 0x00000000 + + + FSLSPCLKSEL + FS/LS PHY clock select + 0 + 2 + read-write + + + FSLSSUPP + FS- and LS-only support + 2 + 1 + read-only + + + + + HFIR + HFIR + OTGFS Host frame interval + register + 0x4 + 0x20 + read-write + 0x0000EA60 + + + FRINT + Frame interval + 0 + 16 + + + + + HFNUM + HFNUM + OTGFS host frame number/frame time + remaining register (OTGFS_HFNUM) + 0x8 + 0x20 + read-only + 0x00003FFF + + + FRNUM + Frame number + 0 + 16 + + + FTREM + Frame time remaining + 16 + 16 + + + + + HPTXSTS + HPTXSTS + OTGFS_Host periodic transmit FIFO/queue + status register (OTGFS_HPTXSTS) + 0x10 + 0x20 + 0x00080100 + + + PTXFSPCAVAIL + Periodic transmit data FIFO space + available + 0 + 16 + read-write + + + PTXQSPCAVAIL + Periodic transmit request queue space + available + 16 + 8 + read-only + + + PTXQTOP + Top of the periodic transmit request + queue + 24 + 8 + read-only + + + + + HAINT + HAINT + OTGFS Host all channels interrupt + register + 0x14 + 0x20 + read-only + 0x00000000 + + + HAINT + Channel interrupts + 0 + 16 + + + + + HAINTMSK + HAINTMSK + OTGFS host all channels interrupt mask + register + 0x18 + 0x20 + read-write + 0x00000000 + + + HAINTMSK + Channel interrupt mask + 0 + 16 + + + + + HPRT + HPRT + OTGFS host port control and status register + (OTGFS_HPRT) + 0x40 + 0x20 + 0x00000000 + + + PRTCONSTS + Port connect status + 0 + 1 + read-only + + + PRTCONDET + Port connect detected + 1 + 1 + read-write + + + PRTENA + Port enable + 2 + 1 + read-write + + + PRTENCHNG + Port enable/disable change + 3 + 1 + read-write + + + PRTOVRCACT + Port overcurrent active + 4 + 1 + read-only + + + PRTOVRCCHNG + Port overcurrent change + 5 + 1 + read-write + + + PRTRES + Port resume + 6 + 1 + read-write + + + PRTSUSP + Port suspend + 7 + 1 + read-write + + + PRTRST + Port reset + 8 + 1 + read-write + + + PRTLNSTS + Port line status + 10 + 2 + read-only + + + PRTPWR + Port power + 12 + 1 + read-write + + + PRTTSTCTL + Port test control + 13 + 4 + read-write + + + PRTSPD + Port speed + 17 + 2 + read-only + + + + + HCCHAR0 + HCCHAR0 + OTGFS host channel-0 characteristics + register (OTGFS_HCCHAR0) + 0x100 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR1 + HCCHAR1 + OTGFS host channel-1 characteristics + register (OTGFS_HCCHAR1) + 0x120 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR2 + HCCHAR2 + OTGFS host channel-2 characteristics + register (OTGFS_HCCHAR2) + 0x140 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR3 + HCCHAR3 + OTGFS host channel-3 characteristics + register (OTGFS_HCCHAR3) + 0x160 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR4 + HCCHAR4 + OTGFS host channel-4 characteristics + register (OTGFS_HCCHAR4) + 0x180 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR5 + HCCHAR5 + OTGFS host channel-5 characteristics + register (OTGFS_HCCHAR5) + 0x1A0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR6 + HCCHAR6 + OTGFS host channel-6 characteristics + register (OTGFS_HCCHAR6) + 0x1C0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR7 + HCCHAR7 + OTGFS host channel-7 characteristics + register (OTGFS_HCCHAR7) + 0x1E0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR8 + HCCHAR8 + OTGFS host channel-8 characteristics + register (OTGFS_HCCHAR8) + 0x200 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR9 + HCCHAR9 + OTGFS host channel-9 characteristics + register (OTGFS_HCCHAR9) + 0x220 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR10 + HCCHAR10 + OTGFS host channel-10 characteristics + register (OTGFS_HCCHAR10) + 0x240 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR11 + HCCHAR11 + OTGFS host channel-7 characteristics + register (OTGFS_HCCHAR11) + 0x260 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR12 + HCCHAR12 + OTGFS host channel-12 characteristics + register (OTGFS_HCCHAR12) + 0x280 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR13 + HCCHAR13 + OTGFS host channel-13 characteristics + register (OTGFS_HCCHAR13) + 0x2A0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR14 + HCCHAR14 + OTGFS host channel-14 characteristics + register (OTGFS_HCCHAR14) + 0x2C0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCCHAR15 + HCCHAR15 + OTGFS host channel-15 characteristics + register (OTGFS_HCCHAR15) + 0x2E0 + 0x20 + read-write + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + + + EPTNUM + Endpoint number + 11 + 4 + + + EPTDIR + Endpoint direction + 15 + 1 + + + LSPDDEV + Low-speed device + 17 + 1 + + + EPTYPE + Endpoint type + 18 + 2 + + + MC + Multicount + 20 + 2 + + + DEVADDR + Device address + 22 + 7 + + + ODDFRM + Odd frame + 29 + 1 + + + CHDIS + Channel disable + 30 + 1 + + + CHENA + Channel enable + 31 + 1 + + + + + HCINT0 + HCINT0 + OTGFS host channel-0 interrupt register + (OTGFS_HCINT0) + 0x108 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT1 + HCINT1 + OTG_FS host channel-1 interrupt register + (OTG_FS_HCINT1) + 0x128 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT2 + HCINT2 + OTGFS host channel-2 interrupt register + (OTGFS_HCINT2) + 0x148 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT3 + HCINT3 + OTGFS host channel-3 interrupt register + (OTGFS_HCINT3) + 0x168 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT4 + HCINT4 + OTGFS host channel-4 interrupt register + (OTGFS_HCINT4) + 0x188 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT5 + HCINT5 + OTGFS host channel-5 interrupt register + (OTGFS_HCINT5) + 0x1A8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT6 + HCINT6 + OTGFS host channel-6 interrupt register + (OTGFS_HCINT6) + 0x1C8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT7 + HCINT7 + OTGFS host channel-7 interrupt register + (OTGFS_HCINT7) + 0x1E8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT8 + HCINT8 + OTGFS host channel-8 interrupt register + (OTGFS_HCINT8) + 0x208 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT9 + HCINT9 + OTGFS host channel-9 interrupt register + (OTGFS_HCINT9) + 0x228 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT10 + HCINT10 + OTGFS host channel-10 interrupt register + (OTGFS_HCINT10) + 0x248 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT11 + HCINT11 + OTGFS host channel-11 interrupt register + (OTGFS_HCINT11) + 0x268 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT12 + HCINT12 + OTGFS host channel-12 interrupt register + (OTGFS_HCINT12) + 0x288 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT13 + HCINT13 + OTGFS host channel-13 interrupt register + (OTGFS_HCINT13) + 0x2A8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT14 + HCINT14 + OTGFS host channel-14 interrupt register + (OTGFS_HCINT14) + 0x2C8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINT15 + HCINT15 + OTGFS host channel-15 interrupt register + (OTGFS_HCINT15) + 0x2E8 + 0x20 + read-write + 0x00000000 + + + XFERC + Transfer completed + 0 + 1 + + + CHHLTD + Channel halted + 1 + 1 + + + STALL + STALL response received + interrupt + 3 + 1 + + + NAK + NAK response received + interrupt + 4 + 1 + + + ACK + ACK response received/transmitted + interrupt + 5 + 1 + + + XACTERR + Transaction error + 7 + 1 + + + BBLERR + Babble error + 8 + 1 + + + FRMOVRUN + Frame overrun + 9 + 1 + + + DTGLERR + Data toggle error + 10 + 1 + + + + + HCINTMSK0 + HCINTMSK0 + OTGFS host channel-0 mask register + (OTGFS_HCINTMSK0) + 0x10C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK1 + HCINTMSK1 + OTGFS host channel-1 mask register + (OTGFS_HCINTMSK1) + 0x12C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK2 + HCINTMSK2 + OTGFS host channel-2 mask register + (OTGFS_HCINTMSK2) + 0x14C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK3 + HCINTMSK3 + OTGFS host channel-3 mask register + (OTGFS_HCINTMSK3) + 0x16C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK4 + HCINTMSK4 + OTGFS host channel-4 mask register + (OTGFS_HCINTMSK4) + 0x18C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK5 + HCINTMSK5 + OTGFS host channel-5 mask register + (OTGFS_HCINTMSK5) + 0x1AC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK6 + HCINTMSK6 + OTGFS host channel-6 mask register + (OTGFS_HCINTMSK6) + 0x1CC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK7 + HCINTMSK7 + OTGFS host channel-7 mask register + (OTGFS_HCINTMSK7) + 0x1EC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK8 + HCINTMSK8 + OTGFS host channel-8 mask register + (OTGFS_HCINTMSK8) + 0x20C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK9 + HCINTMSK9 + OTGFS host channel-9 mask register + (OTGFS_HCINTMSK9) + 0x22C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK10 + HCINTMSK10 + OTGFS host channel-10 mask register + (OTGFS_HCINTMSK10) + 0x24C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK11 + HCINTMSK11 + OTGFS host channel-11 mask register + (OTGFS_HCINTMSK11) + 0x26C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK12 + HCINTMSK12 + OTGFS host channel-12 mask register + (OTGFS_HCINTMSK12) + 0x28C + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK13 + HCINTMSK13 + OTGFS host channel-13 mask register + (OTGFS_HCINTMSK13) + 0x2AC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK14 + HCINTMSK14 + OTGFS host channel-14 mask register + (OTGFS_HCINTMSK14) + 0x2CC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCINTMSK15 + HCINTMSK15 + OTGFS host channel-15 mask register + (OTGFS_HCINTMSK15) + 0x2EC + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed mask + 0 + 1 + + + CHHLTDMSK + Channel halted mask + 1 + 1 + + + STALLMSK + STALL response received interrupt + mask + 3 + 1 + + + NAKMSK + NAK response received interrupt + mask + 4 + 1 + + + ACKMSK + ACK response received/transmitted + interrupt mask + 5 + 1 + + + XACTERRMSK + Transaction error mask + 7 + 1 + + + BBLERRMSK + Babble error mask + 8 + 1 + + + FRMOVRUNMSK + Frame overrun mask + 9 + 1 + + + DTGLERRMSK + Data toggle error mask + 10 + 1 + + + + + HCTSIZ0 + HCTSIZ0 + OTGFS host channel-0 transfer size + register + 0x110 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ1 + HCTSIZ1 + OTGFS host channel-1 transfer size + register + 0x130 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ2 + HCTSIZ2 + OTGFS host channel-2 transfer size + register + 0x150 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ3 + HCTSIZ3 + OTGFS host channel-3 transfer size + register + 0x170 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ4 + HCTSIZ4 + OTGFS host channel-4 transfer size + register + 0x190 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ5 + HCTSIZ5 + OTGFS host channel-5 transfer size + register + 0x1B0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ6 + HCTSIZ6 + OTGFS host channel-6 transfer size + register + 0x1D0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ7 + HCTSIZ7 + OTGFS host channel-7 transfer size + register + 0x1F0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ8 + HCTSIZ8 + OTGFS host channel-8 transfer size + register + 0x210 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ9 + HCTSIZ9 + OTGFS host channel-9 transfer size + register + 0x230 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ10 + HCTSIZ10 + OTGFS host channel-10 transfer size + register + 0x250 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ11 + HCTSIZ11 + OTGFS host channel-11 transfer size + register + 0x270 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ12 + HCTSIZ12 + OTGFS host channel-12 transfer size + register + 0x290 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ13 + HCTSIZ13 + OTGFS host channel-13 transfer size + register + 0x2B0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ14 + HCTSIZ14 + OTGFS host channel-14 transfer size + register + 0x2D0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + HCTSIZ15 + HCTSIZ15 + OTGFS host channel-15 transfer size + register + 0x2F0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + PID + PID + 29 + 2 + + + + + + + USB_OTG2_DEVICE + USB on the go full speed + USB_OTG2 + 0x40040800 + + 0x0 + 0x400 + registers + + + + DCFG + DCFG + OTGFS device configuration register + (OTGFS_DCFG) + 0x0 + 0x20 + read-write + 0x02200000 + + + DEVSPD + Device speed + 0 + 2 + + + NZSTSOUTHSHK + Non-zero-length status OUT + handshake + 2 + 1 + + + DEVADDR + Device address + 4 + 7 + + + PERFRINT + Periodic frame interval + 11 + 2 + + + + + DCTL + DCTL + OTGFS device control register + (OTGFS_DCTL) + 0x4 + 0x20 + 0x00000000 + + + RWKUPSIG + Remote wakeup signaling + 0 + 1 + read-write + + + SFTDISCON + Soft disconnect + 1 + 1 + read-write + + + GNPINNAKSTS + Global IN NAK status + 2 + 1 + read-only + + + GOUTNAKSTS + Global OUT NAK status + 3 + 1 + read-only + + + TSTCTL + Test control + 4 + 3 + read-write + + + SGNPINNAK + Set global IN NAK + 7 + 1 + read-write + + + CGNPINNAK + Clear global IN NAK + 8 + 1 + read-write + + + SGOUTNAK + Set global OUT NAK + 9 + 1 + read-write + + + CGOUTNAK + Clear global OUT NAK + 10 + 1 + read-write + + + PWROPRGDNE + Power-on programming done + 11 + 1 + read-write + + + + + DSTS + DSTS + OTGFS device status register + (OTGFS_DSTS) + 0x8 + 0x20 + read-only + 0x00000010 + + + SUSPSTS + Suspend status + 0 + 1 + + + ENUMSPD + Enumerated speed + 1 + 2 + + + ETICERR + Erratic error + 3 + 1 + + + SOFFN + Frame number of the received + SOF + 8 + 14 + + + + + DIEPMSK + DIEPMSK + OTGFS device IN endpoint common interrupt + mask register (OTGFS_DIEPMSK) + 0x10 + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed interrupt + mask + 0 + 1 + + + EPTDISMSK + Endpoint disabled interrupt + mask + 1 + 1 + + + TIMEOUTMSK + Timeout condition mask (Non-isochronous + endpoints) + 3 + 1 + + + INTKNTXFEMPMSK + IN token received when TxFIFO empty + mask + 4 + 1 + + + INTKNEPTMISMSK + IN token received with EP mismatch + mask + 5 + 1 + + + INEPTNAKMSK + IN endpoint NAK effective + mask + 6 + 1 + + + TXFIFOUDRMSK + FIFO underrun + mask + 8 + 1 + + + BNAINMSK + BNA interrupt + mask + 9 + 1 + + + + + DOEPMSK + DOEPMSK + OTGFS device OUT endpoint common interrupt + mask register (OTGFS_DOEPMSK) + 0x14 + 0x20 + read-write + 0x00000000 + + + XFERCMSK + Transfer completed interrupt + mask + 0 + 1 + + + EPTDISMSK + Endpoint disabled interrupt + mask + 1 + 1 + + + SETUPMSK + SETUP phase done mask + 3 + 1 + + + OUTTEPDMSK + OUT token received when endpoint + disabled mask + 4 + 1 + + + B2BSETUPMSK + Back-to-back SETUP packets + received mask + 6 + 1 + + + OUTPERRMSK + OUT packet error + mask + 8 + 1 + + + BNAOUTMSK + BNA interrupt + mask + 9 + 1 + + + + + DAINT + DAINT + OTGFS device all endpoints interrupt + register (OTGFS_DAINT) + 0x18 + 0x20 + read-only + 0x00000000 + + + INEPTINT + IN endpoint interrupt bits + 0 + 16 + + + OUTEPTINT + OUT endpoint interrupt + bits + 16 + 16 + + + + + DAINTMSK + DAINTMSK + OTGFS all endpoints interrupt mask register + (OTGFS_DAINTMSK) + 0x1C + 0x20 + read-write + 0x00000000 + + + INEPTMSK + IN EP interrupt mask bits + 0 + 16 + + + OUTEPTMSK + OUT endpoint interrupt + bits + 16 + 16 + + + + + DIEPEMPMSK + DIEPEMPMSK + OTGFS device IN endpoint FIFO empty + interrupt mask register + 0x34 + 0x20 + read-write + 0x00000000 + + + INEPTXFEMSK + IN EP Tx FIFO empty interrupt mask + bits + 0 + 16 + + + + + DIEPCTL0 + DIEPCTL0 + OTGFS device control IN endpoint 0 control + register (OTGFS_DIEPCTL0) + 0x100 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 2 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-only + + + EPTENA + Endpoint enable + 31 + 1 + read-only + + + + + DIEPCTL1 + DIEPCTL1 + OTGFS device IN endpoint-1 control + register + 0x120 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL2 + DIEPCTL2 + OTGFS device IN endpoint-2 control + register + 0x140 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL3 + DIEPCTL3 + OTGFS device IN endpoint-3 control + register + 0x160 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL4 + DIEPCTL4 + OTGFS device IN endpoint-4 control + register + 0x180 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL5 + DIEPCTL5 + OTGFS device IN endpoint-5 control + register + 0x1A0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL6 + DIEPCTL6 + OTGFS device IN endpoint-6 control + register + 0x1C0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPCTL7 + DIEPCTL7 + OTGFS device IN endpoint-7 control + register + 0x1E0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-write + + + DPID + Endpoint Data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + TXFNUM + TxFIFO number + 22 + 4 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + SETD0PID + Set DATA0 PID + 28 + 1 + write-only + + + SETD1PID + Set DATA1 PID + 29 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL0 + DOEPCTL0 + OTGFS device OUT endpoint-0 control + register + 0x300 + 0x20 + 0x00008000 + + + MPS + Maximum packet size + 0 + 2 + read-only + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL1 + DOEPCTL1 + OTGFS device OUT endpoint-1 control + register + 0x320 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL2 + DOEPCTL2 + OTGFS device OUT endpoint-2 control + register + 0x340 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL3 + DOEPCTL3 + OTGFS device OUT endpoint-3 control + register + 0x360 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL4 + DOEPCTL4 + OTGFS device OUT endpoint-4 control + register + 0x380 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL5 + DOEPCTL5 + OTGFS device OUT endpoint-5 control + register + 0x3A0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL6 + DOEPCTL6 + OTGFS device OUT endpoint-6 control + register + 0x3C0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DOEPCTL7 + DOEPCTL7 + OTGFS device OUT endpoint-7 control + register + 0x3E0 + 0x20 + 0x00000000 + + + MPS + Maximum packet size + 0 + 11 + read-write + + + USBACEPT + USB active endpoint + 15 + 1 + read-only + + + DPID + Endpoint data PID + 16 + 1 + read-only + + + NAKSTS + NAK status + 17 + 1 + read-only + + + EPTYPE + Endpoint type + 18 + 2 + read-only + + + SNP + Snoop mode + 20 + 1 + read-write + + + STALL + STALL handshake + 21 + 1 + read-write + + + CNAK + Clear NAK + 26 + 1 + write-only + + + SNAK + Set NAK + 27 + 1 + write-only + + + EPTDIS + Endpoint disable + 30 + 1 + read-write + + + EPTENA + Endpoint enable + 31 + 1 + read-write + + + + + DIEPINT0 + DIEPINT0 + OTGFS device IN endpoint-0 interrupt + register + 0x108 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT1 + DIEPINT1 + OTGFS device IN endpoint-1 interrupt + register + 0x128 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT2 + DIEPINT2 + OTGFS device IN endpoint-2 interrupt + register + 0x148 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT3 + DIEPINT3 + OTGFS device IN endpoint-3 interrupt + register + 0x168 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT4 + DIEPINT4 + OTGFS device IN endpoint-4 interrupt + register + 0x188 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT5 + DIEPINT5 + OTGFS device IN endpoint-5 interrupt + register + 0x1A8 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT6 + DIEPINT6 + OTGFS device IN endpoint-6 interrupt + register + 0x1C8 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DIEPINT7 + DIEPINT7 + OTGFS device IN endpoint-7 interrupt + register + 0x1E8 + 0x20 + 0x00000080 + + + XFERC + Transfer completed + interrupt + 0 + 1 + read-write + + + EPTDISD + Endpoint disabled + interrupt + 1 + 1 + read-write + + + TIMEOUT + Timeout condition + 3 + 1 + read-write + + + INTKNTXFEMP + IN token received when + TxFIFO is empty + 4 + 1 + read-write + + + INEPTNAK + IN endpoint NAK + effective + 6 + 1 + read-write + + + TXFEMP + Transmit FIFO + empty + 7 + 1 + read-only + + + + + DOEPINT0 + DOEPINT0 + OTGFS device OUT endpoint-0 interrupt + register + 0x308 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT1 + DOEPINT1 + OTGFS device OUT endpoint-1 interrupt + register + 0x328 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT2 + DOEPINT2 + OTGFS device OUT endpoint-2 interrupt + register + 0x348 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT3 + DOEPINT3 + OTGFS device OUT endpoint-3 interrupt + register + 0x368 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT4 + DOEPINT4 + OTGFS device OUT endpoint-4 interrupt + register + 0x388 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT5 + DOEPINT5 + OTGFS device OUT endpoint-5 interrupt + register + 0x3A8 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT6 + DOEPINT6 + OTGFS device OUT endpoint-6 interrupt + register + 0x3C8 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DOEPINT7 + DOEPINT7 + OTGFS device OUT endpoint-7 interrupt + register + 0x3E8 + 0x20 + read-write + 0x00000080 + + + XFERC + Transfer completed interrupt + 0 + 1 + + + EPTDISD + Endpoint disabled interrupt + 1 + 1 + + + SETUP + SETUP phase done + 3 + 1 + + + OUTTEPD + OUT token received when + endpoint disabled + 4 + 1 + + + B2BSTUP + Back-to-back SETUP + packets received + 6 + 1 + + + + + DIEPTSIZ0 + DIEPTSIZ0 + OTGFS device IN endpoint-0 transfer size + register + 0x110 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 7 + + + PKTCNT + Packet count + 19 + 2 + + + + + DOEPTSIZ0 + DOEPTSIZ0 + OTGFS device OUT endpoint-0 transfer size + register + 0x310 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 7 + + + PKTCNT + Packet count + 19 + 1 + + + SETUPCNT + SETUP packet count + 29 + 2 + + + + + DIEPTSIZ1 + DIEPTSIZ1 + OTGFS device IN endpoint-1 transfer size + register + 0x130 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ2 + DIEPTSIZ2 + OTGFS device IN endpoint-2 transfer size + register + 0x150 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ3 + DIEPTSIZ3 + OTG device IN endpoint-3 transfer size + register + 0x170 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ4 + DIEPTSIZ4 + OTG device IN endpoint-4 transfer size + register + 0x190 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ5 + DIEPTSIZ5 + OTG device IN endpoint-5 transfer size + register + 0x1B0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ6 + DIEPTSIZ6 + OTG device IN endpoint-6 transfer size + register + 0x1D0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DIEPTSIZ7 + DIEPTSIZ7 + OTG device IN endpoint-7 transfer size + register + 0x1F0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + MC + Multi count + 29 + 2 + + + + + DTXFSTS0 + DTXFSTS0 + OTGFS device IN endpoint-0 transmit FIFO + status register + 0x118 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS1 + DTXFSTS1 + OTGFS device IN endpoint-1 transmit FIFO + status register + 0x138 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS2 + DTXFSTS2 + OTGFS device IN endpoint-2 transmit FIFO + status register + 0x158 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS3 + DTXFSTS3 + OTGFS device IN endpoint-3 transmit FIFO + status register + 0x178 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS4 + DTXFSTS4 + OTGFS device IN endpoint-4 transmit FIFO + status register + 0x198 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS5 + DTXFSTS5 + OTGFS device IN endpoint-5 transmit FIFO + status register + 0x1B8 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS6 + DTXFSTS6 + OTGFS device IN endpoint-6 transmit FIFO + status register + 0x1D8 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DTXFSTS7 + DTXFSTS7 + OTGFS device IN endpoint-7 transmit FIFO + status register + 0x1F8 + 0x20 + read-only + 0x00000000 + + + INEPTXFSAV + IN endpoint TxFIFO space + available + 0 + 16 + + + + + DOEPTSIZ1 + DOEPTSIZ1 + OTGFS device OUT endpoint-1 transfer size + register + 0x330 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ2 + DOEPTSIZ2 + OTGFS device OUT endpoint-2 transfer size + register + 0x350 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ3 + DOEPTSIZ3 + OTGFS device OUT endpoint-3 transfer size + register + 0x370 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ4 + DOEPTSIZ4 + OTGFS device OUT endpoint-4 transfer size + register + 0x390 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ5 + DOEPTSIZ5 + OTGFS device OUT endpoint-5 transfer size + register + 0x3B0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ6 + DOEPTSIZ6 + OTGFS device OUT endpoint-6 transfer size + register + 0x3D0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + DOEPTSIZ7 + DOEPTSIZ7 + OTGFS device OUT endpoint-7 transfer size + register + 0x3F0 + 0x20 + read-write + 0x00000000 + + + XFERSIZE + Transfer size + 0 + 19 + + + PKTCNT + Packet count + 19 + 10 + + + RXDPID + Received data PID + 29 + 2 + + + + + + + USB_OTG2_PWRCLK + USB on the go full speed + USB_OTG2 + 0x40040E00 + + 0x0 + 0x400 + registers + + + + PCGCCTL + PCGCCTL + OTGFS power and clock gating control + register (OTGFS_PCGCCTL) + 0x0 + 0x20 + 0x00000000 + + + STOPPCLK + Stop PHY clock + 0 + 1 + read-write + + + SUSPENDM + PHY Suspended + 4 + 1 + read-only + + + + + + + SCFG + System configuration controller + SCFG + 0x40013800 + + 0x0 + 0x400 + registers + + + + CFG1 + CFG1 + configuration register 1 + 0x0 + 0x20 + read-write + 0x00000000 + + + MEM_MAP_SEL + Memory address mapping selection bits + 0 + 3 + + + IR_POL + IR output polarity selection + 5 + 1 + + + IR_SRC_SEL + IR signal source selection + 6 + 2 + + + SWAP_XMC + XMC address mapping swap + 10 + 2 + + + + + CFG2 + CFG2 + configuration register 2 + 0x4 + 0x20 + read-write + 0x00000000 + + + MII_RMII_SEL + MII or RMII selection + bits + 23 + 1 + + + + + EXINTC1 + EXINTC1 + external interrupt configuration register 1 + 0x8 + 0x20 + read-write + 0x0000 + + + EXINT3 + EXINT 3 configuration bits + 12 + 4 + + + EXINT2 + EXINT 2 configuration bits + 8 + 4 + + + EXINT1 + EXINT 1 configuration bits + 4 + 4 + + + EXINT0 + EXINT 0 configuration bits + 0 + 4 + + + + + EXINTC2 + EXINTC2 + external interrupt configuration register 2 + 0xC + 0x20 + read-write + 0x0000 + + + EXINT7 + EXINT 7 configuration bits + 12 + 4 + + + EXINT6 + EXINT 6 configuration bits + 8 + 4 + + + EXINT5 + EXINT 5 configuration bits + 4 + 4 + + + EXINT4 + EXINT 4 configuration bits + 0 + 4 + + + + + EXINTC3 + EXINTC3 + external interrupt configuration register 3 + 0x10 + 0x20 + read-write + 0x0000 + + + EXINT11 + EXINT 11 configuration bits + 12 + 4 + + + EXINT10 + EXINT 10 configuration bits + 8 + 4 + + + EXINT9 + EXINT 9 configuration bits + 4 + 4 + + + EXINT8 + EXINT 8 configuration bits + 0 + 4 + + + + + EXINTC4 + EXINTC4 + external interrupt configuration register + 4 + 0x14 + 0x20 + read-write + 0x0000 + + + EXINT15 + EXINT 15 configuration bits + 12 + 4 + + + EXINT14 + EXINT 14 configuration bits + 8 + 4 + + + EXINT13 + EXINT 13 configuration bits + 4 + 4 + + + EXINT12 + EXINT 12 configuration bits + 0 + 4 + + + + + UHDRV + UHDRV + Ultra high drive register + 0x2C + 0x20 + read-write + 0x0000 + + + PF15_UH + PF15 ultra high sourcing/sinking strength + 10 + 1 + + + PF14_UH + PF14 ultra high sourcing/sinking strength + 9 + 1 + + + PD15_UH + PD15 ultra high sourcing/sinking strength + 8 + 1 + + + PD14_UH + PD14 ultra high sourcing/sinking strength + 7 + 1 + + + PD13_UH + PD13 ultra high sourcing/sinking strength + 6 + 1 + + + PD12_UH + PD12 ultra high sourcing/sinking strength + 5 + 1 + + + PB10_UH + PB10 ultra high sourcing/sinking strength + 2 + 1 + + + PB9_UH + PB9 ultra high sourcing/sinking strength + 1 + 1 + + + PB3_UH + PB3 ultra high sourcing/sinking strength + 0 + 1 + + + + + + + QSPI1 + Quad SPI Controller + QSPI + 0xA0001000 + + 0x0 + 0x400 + registers + + + QSPI1 + QSPI1 global interrupt + 92 + + + + CMD_W0 + CMD_W0 + Command word 0 + 0x0 + 0x20 + read-write + 0x00000000 + + + SPIADR + SPI flash address + 0 + 32 + + + + + CMD_W1 + CMD_W1 + Command word 1 + 0x4 + 0x20 + read-write + 0x01000003 + + + ADRLEN + SPI address length + 0 + 3 + + + DUM2 + Second dummy state cycle + 16 + 8 + + + INSLEN + Instruction code length + 24 + 2 + + + PEMEN + Perfrmance enhance mode enable + 28 + 1 + + + + + CMD_W2 + CMD_W2 + Command word 2 + 0x8 + 0x20 + read-write + 0x01000003 + + + DCNT + Read write data counter + 0 + 32 + + + + + CMD_W3 + CMD_W3 + Command word 3 + 0xC + 0x20 + read-write + 0x00000000 + + + WEN + Write data enable + 1 + 1 + + + RSTSEN + Read spi status enable + 2 + 1 + + + RSTSC + Read spi status configure + 3 + 1 + + + OPMODE + SPI operate mode + 5 + 3 + + + PEMOPC + Performance enhance mode operate code + 16 + 8 + + + INSC + Instruction code + 24 + 8 + + + + + CTRL + CTRL + Control register + 0x10 + 0x20 + read-write + 0x00000000 + + + CLKDIV + SPI clock divider + 0 + 3 + + + SCKMODE + Sckout mode + 4 + 1 + + + XIPIDLE + XIP port idle status + 7 + 1 + + + ABORT + Abort instruction + 8 + 1 + + + BUSY + Busy bit of spi status + 16 + 3 + + + XIPRCMDF + XIP read command flush + 19 + 1 + + + XIPSEL + XIP port selection + 20 + 1 + + + KEYEN + encryption key enable + 21 + 1 + + + + + ACTR + ACTR + AC timing control register + 0x14 + 0x20 + read-write + 0x0000000F + + + CSDLY + CS delay + 0 + 4 + + + + + FIFOSTS + FIFOSTS + FIFO Status register + 0x18 + 0x20 + read-only + 0x00000001 + + + TXFIFORDY + TxFIFO ready status + 0 + 1 + + + RXFIFORDY + RxFIFO ready status + 1 + 1 + + + + + CTRL2 + CTRL2 + control register 2 + 0x20 + 0x20 + read-write + 0x00000001 + + + DMAEN + DMA handshake enable + 0 + 1 + + + CMDIE + Command complete interrupt enable + 1 + 1 + + + TXFIFOTHOD + TxFIFO thod + 8 + 2 + + + RXFIFOTHOD + RxFIFO thod + 12 + 2 + + + + + CMDSTS + CMDSTS + CMD status register + 0x24 + 0x20 + read-only + 0x00000000 + + + CMDSTS + Command complete status + 0 + 1 + + + + + RSTS + RSTS + SPI read status register + 0x28 + 0x20 + read-only + 0x00000000 + + + SPISTS + SPI read status + 0 + 8 + + + + + FSIZE + FSIZE + SPI flash size + 0x2C + 0x20 + read-write + 0x00000000 + + + SPIFSIZE + SPI flash size + 0 + 32 + + + + + XIP_CMD_W0 + XIP_CMD_W0 + XIP command word 0 + 0x30 + 0x20 + read-write + 0x00000000 + + + XIPR_DUM2 + XIP read second dummy cycle + 0 + 8 + + + XIPR_OPMODE + XIP read operate mode + 8 + 3 + + + XIPR_ADRLEN + XIP read address length + 11 + 1 + + + XIPR_INSC + XIP read instruction code + 12 + 8 + + + + + XIP_CMD_W1 + XIP_CMD_W1 + XIP command word 1 + 0x34 + 0x20 + read-write + 0x00000000 + + + XIPW_DUM2 + XIP write second dummy cycle + 0 + 8 + + + XIPW_OPMODE + XIP write operate mode + 8 + 3 + + + XIPW_ADRLEN + XIP write address length + 11 + 1 + + + XIPW_INSC + XIP write instruction code + 12 + 8 + + + + + XIP_CMD_W2 + XIP_CMD_W2 + XIP command word 2 + 0x38 + 0x20 + read-write + 0x00000000 + + + XIPR_DCNT + XIP read data counter + 0 + 6 + + + XIPR_TCNT + XIP continue read cycle counter + 8 + 7 + + + XIPR_SEL + XIP read continue mode select + 15 + 1 + + + XIPW_DCNT + XIP write data counter + 16 + 6 + + + XIPW_TCNT + XIP continue write cycle counter + 24 + 7 + + + XIPW_SEL + XIP write continue mode select + 31 + 1 + + + + + XIP_CMD_W3 + XIP_CMD_W3 + XIP command word 3 + 0x3C + 0x20 + read-write + 0x00000000 + + + BYPASSC + Bypass cache function + 0 + 1 + + + CSTS + Cache status + 3 + 1 + + + + + REV + REV + Revision + 0x50 + 0x20 + read-write + 0x00010500 + + + REVISION + Revision number + 0 + 31 + + + + + DT + DT + 32/16/8 bit data port register + 0x100 + 0x20 + read-write + 0x00000000 + + + + + QSPI2 + 0xA0002000 + + QSPI2 + QSPI2 global interrupt + 91 + + + + diff --git a/armlib/AT32_Firmware_Library_Change.md b/armlib/AT32_Firmware_Library_Change.md new file mode 100644 index 000000000..2674e2b48 --- /dev/null +++ b/armlib/AT32_Firmware_Library_Change.md @@ -0,0 +1,46 @@ +# Introduction + +In order to simplify development, some peripheral devices are operated using the firmware library provided by AT32 +official. + +The directory where the basic firmware library for AT32 is stored is `at32_sys`. + +There are some additional USB (middleware) implementations stored in the ` at32_usb ` directory. + +The source is opensource on +GitHub, [AT32F435_437_Firmware_Library](https://github.com/ArteryTek/AT32F435_437_Firmware_Library) + +- `AT32F435_437_Firmware_Library/libraries/cmsis` > `armlib/at32_sys/cmsis` +- `AT32F435_437_Firmware_Library/libraries/drivers` > `armlib/at32_sys/drivers` + +> `core` dir is from gpio example, it is related by project, in general, it is not necessary to modify it. + +--- + +# What's change + +## Change of `at32f435_437_conf.h` + +We would like to use the official library directly for the current ARM project without modifying it. +However, in reality, some of the official libraries are not well-designed and have a serious impact on the buildingof +the project. +Such as, the UART related libraries may conflict with some function/variable names in the current PM3. + +- Annotate all module definitions and includes definitions. +- including `at32f435_437.h` does not include all definitions of drivers/base libraries. include your drivers/base + libraries if needed. +- If the driver library reports an error, it may be because the driver library does not include the required header + file (which was originally included by the `at32f435_437_comf.h` header file). + +## Change of files + +- Some datasheet pdf deleted +- `startup_at32f435_437.s` + - delete `.bss` clear + - delete `.data` copy + - delete call `__libc_init_array()` function + - stack top change to symbol `_stack_end` + > This startup file is specifically designed for the osimage of PM3 and is no longer compatible with the official example of AT32. +- delete dir: `startup/gcc/linker` +- delete dir: `startup/iar` +- delete dir: `startup/mdk` diff --git a/armlib/at32_i2c/at32f435_437_i2c_app.c b/armlib/at32_i2c/at32f435_437_i2c_app.c new file mode 100644 index 000000000..432304c22 --- /dev/null +++ b/armlib/at32_i2c/at32f435_437_i2c_app.c @@ -0,0 +1,2338 @@ +/** + ************************************************************************** + * @file at32f435_437_i2c_app.c + * @brief the driver library of the i2c peripheral + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_i2c_app.h" + +/** @addtogroup AT32F435_437_middlewares_i2c_application_library + * @{ + */ + +/** + * @brief get the dma transfer direction flag through the channel + */ +#define DMA_GET_REQUEST(DMA_CHANNEL) \ +(((uint32_t)(DMA_CHANNEL) == ((uint32_t)hi2c->dma_tx_channel)) ? I2C_DMA_REQUEST_TX : I2C_DMA_REQUEST_RX) + +/** + * @brief get the dma transfer complete flag through the channel + */ +#define DMA_GET_TC_FLAG(DMA_CHANNEL) \ +(((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL1))? DMA1_FDT1_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL2))? DMA1_FDT2_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL3))? DMA1_FDT3_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL4))? DMA1_FDT4_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL5))? DMA1_FDT5_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL6))? DMA1_FDT6_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL7))? DMA1_FDT7_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL1))? DMA2_FDT1_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL2))? DMA2_FDT2_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL3))? DMA2_FDT3_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL4))? DMA2_FDT4_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL5))? DMA2_FDT5_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL6))? DMA2_FDT6_FLAG : \ + DMA2_FDT7_FLAG) + +/** + * @brief get the dma half transfer flag through the channel + */ +#define DMA_GET_HT_FLAG(DMA_CHANNEL) \ +(((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL1))? DMA1_HDT1_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL2))? DMA1_HDT2_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL3))? DMA1_HDT3_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL4))? DMA1_HDT4_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL5))? DMA1_HDT5_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL6))? DMA1_HDT6_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL7))? DMA1_HDT7_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL1))? DMA2_HDT1_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL2))? DMA2_HDT2_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL3))? DMA2_HDT3_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL4))? DMA2_HDT4_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL5))? DMA2_HDT5_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL6))? DMA2_HDT6_FLAG : \ + DMA2_HDT7_FLAG) + +/** + * @brief get the dma transfer error flag through the channel + */ +#define DMA_GET_TERR_FLAG(DMA_CHANNEL) \ +(((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL1))? DMA1_DTERR1_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL2))? DMA1_DTERR2_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL3))? DMA1_DTERR3_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL4))? DMA1_DTERR4_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL5))? DMA1_DTERR5_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL6))? DMA1_DTERR6_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA1_CHANNEL7))? DMA1_DTERR7_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL1))? DMA2_DTERR1_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL2))? DMA2_DTERR2_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL3))? DMA2_DTERR3_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL4))? DMA2_DTERR4_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL5))? DMA2_DTERR5_FLAG : \ + ((uint32_t)(DMA_CHANNEL) == ((uint32_t)DMA2_CHANNEL6))? DMA2_DTERR6_FLAG : \ + DMA2_DTERR7_FLAG) + +/** + * @brief i2c transmission status + */ +#define I2C_START 0 +#define I2C_END 1 + +/** + * @brief initializes peripherals used by the i2c. + * @param none + * @retval none + */ +__WEAK void i2c_lowlevel_init(i2c_handle_type* hi2c) +{ + +} + +/** + * @brief i2c peripheral initialization. + * @param hi2c: the handle points to the operation information. + * @retval none. + */ +void i2c_config(i2c_handle_type* hi2c) +{ + /* reset i2c peripheral */ + i2c_reset(hi2c->i2cx); + + /* i2c peripheral initialization */ + i2c_lowlevel_init(hi2c); + + /* i2c peripheral enable */ + i2c_enable(hi2c->i2cx, TRUE); +} + +/** + * @brief refresh i2c register. + * @param hi2c: the handle points to the operation information. + * @retval none. + */ +void i2c_refresh_txdt_register(i2c_handle_type* hi2c) +{ + /* clear tdis flag */ + if (i2c_flag_get(hi2c->i2cx, I2C_TDIS_FLAG) != RESET) + { + hi2c->i2cx->txdt = 0x00; + } + + /* refresh txdt register*/ + if (i2c_flag_get(hi2c->i2cx, I2C_TDBE_FLAG) == RESET) + { + hi2c->i2cx->sts_bit.tdbe = 1; + } +} + +/** + * @brief reset ctrl2 register. + * @param hi2c: the handle points to the operation information. + * @retval none. + */ +void i2c_reset_ctrl2_register(i2c_handle_type* hi2c) +{ + hi2c->i2cx->ctrl2_bit.saddr = 0; + hi2c->i2cx->ctrl2_bit.readh10 = 0; + hi2c->i2cx->ctrl2_bit.cnt = 0; + hi2c->i2cx->ctrl2_bit.rlden = 0; + hi2c->i2cx->ctrl2_bit.dir = 0; +} + +/** + * @brief wait for the transfer to end. + * @param hi2c: the handle points to the operation information. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_wait_end(i2c_handle_type* hi2c, uint32_t timeout) +{ + while(hi2c->status != I2C_END) + { + /* check timeout */ + if((timeout--) == 0) + { + return I2C_ERR_TIMEOUT; + } + } + + if(hi2c->error_code != I2C_OK) + { + return hi2c->error_code; + } + + return I2C_OK; +} + +/** + * @brief wait for the flag to be set or reset, only BUSYF flag + * is waiting to be reset, and other flags are waiting to be set + * @param hi2c: the handle points to the operation information. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - I2C_TDBE_FLAG: transmit data buffer empty flag. + * - I2C_TDIS_FLAG: send interrupt status. + * - I2C_RDBF_FLAG: receive data buffer full flag. + * - I2C_ADDRF_FLAG: 0~7 bit address match flag. + * - I2C_ACKFAIL_FLAG: acknowledge failure flag. + * - I2C_STOPF_FLAG: stop condition generation complete flag. + * - I2C_TDC_FLAG: transmit data complete flag. + * - I2C_TCRLD_FLAG: transmission is complete, waiting to load data. + * - I2C_BUSERR_FLAG: bus error flag. + * - I2C_ARLOST_FLAG: arbitration lost flag. + * - I2C_OUF_FLAG: overflow or underflow flag. + * - I2C_PECERR_FLAG: pec receive error flag. + * - I2C_TMOUT_FLAG: smbus timeout flag. + * - I2C_ALERTF_FLAG: smbus alert flag. + * - I2C_BUSYF_FLAG: bus busy flag transmission mode. + * - I2C_SDIR_FLAG: slave data transmit direction. + * @param event_check: check other error flags while waiting for the flag. + * parameter as following values: + * - I2C_EVENT_CHECK_NONE + * - I2C_EVENT_CHECK_ACKFAIL + * - I2C_EVENT_CHECK_STOP + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_wait_flag(i2c_handle_type* hi2c, uint32_t flag, uint32_t event_check, uint32_t timeout) +{ + if(flag == I2C_BUSYF_FLAG) + { + while(i2c_flag_get(hi2c->i2cx, flag) != RESET) + { + /* check timeout */ + if((timeout--) == 0) + { + hi2c->error_code = I2C_ERR_TIMEOUT; + + return I2C_ERR_TIMEOUT; + } + } + } + else + { + while(i2c_flag_get(hi2c->i2cx, flag) == RESET) + { + /* check the ack fail flag */ + if(event_check & I2C_EVENT_CHECK_ACKFAIL) + { + if(i2c_flag_get(hi2c->i2cx, I2C_ACKFAIL_FLAG) != RESET) + { + /* clear ack fail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + + hi2c->error_code = I2C_ERR_ACKFAIL; + + return I2C_ERR_ACKFAIL; + } + } + + /* check the stop flag */ + if(event_check & I2C_EVENT_CHECK_STOP) + { + if(i2c_flag_get(hi2c->i2cx, I2C_STOPF_FLAG) != RESET) + { + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + i2c_reset_ctrl2_register(hi2c); + + hi2c->error_code = I2C_ERR_STOP; + + return I2C_ERR_STOP; + } + } + + /* check timeout */ + if((timeout--) == 0) + { + hi2c->error_code = I2C_ERR_TIMEOUT; + + return I2C_ERR_TIMEOUT; + } + } + } + + return I2C_OK; +} + +/** + * @brief dma transfer cofiguration. + * @param hi2c: the handle points to the operation information. + * @param dma_channelx: dma channel to be cofigured. + * @param pdata: data buffer. + * @param size: data size. + * @retval none. + */ +void i2c_dma_config(i2c_handle_type* hi2c, dma_channel_type* dma_channel, uint8_t* pdata, uint16_t size) +{ + /* disable the dma channel */ + dma_channel_enable(dma_channel, FALSE); + + /* disable the transfer complete interrupt */ + dma_interrupt_enable(dma_channel, DMA_FDT_INT, FALSE); + + /* configure the dma channel with the buffer address and the buffer size */ + hi2c->dma_init_struct.memory_base_addr = (uint32_t)pdata; + hi2c->dma_init_struct.direction = (dma_channel == hi2c->dma_tx_channel) ? DMA_DIR_MEMORY_TO_PERIPHERAL : DMA_DIR_PERIPHERAL_TO_MEMORY; + hi2c->dma_init_struct.peripheral_base_addr = (dma_channel == hi2c->dma_tx_channel) ? (uint32_t)&hi2c->i2cx->txdt : (uint32_t)&hi2c->i2cx->rxdt; + hi2c->dma_init_struct.buffer_size = (uint32_t)size; + dma_init(dma_channel, &hi2c->dma_init_struct); + + /* enable the transfer complete interrupt */ + dma_interrupt_enable(dma_channel, DMA_FDT_INT, TRUE); + + /* enable the dma channel */ + dma_channel_enable(dma_channel, TRUE); +} + +/** + * @brief start transfer in poll mode or interrupt mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param start: config gen start condition mode. + * parameter as following values: + * - I2C_WITHOUT_START: transfer data without start condition. + * - I2C_GEN_START_READ: read data and generate start. + * - I2C_GEN_START_WRITE: send data and generate start. + * @retval i2c status. + */ +void i2c_start_transfer(i2c_handle_type* hi2c, uint16_t address, i2c_start_mode_type start) +{ + if (hi2c->pcount > MAX_TRANSFER_CNT) + { + hi2c->psize = MAX_TRANSFER_CNT; + + i2c_transmit_set(hi2c->i2cx, address, hi2c->psize, I2C_RELOAD_MODE, start); + } + else + { + hi2c->psize = hi2c->pcount; + + i2c_transmit_set(hi2c->i2cx, address, hi2c->psize, I2C_AUTO_STOP_MODE, start); + } +} + +/** + * @brief start transfer in dma mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param start: config gen start condition mode. + * parameter as following values: + * - I2C_WITHOUT_START: transfer data without start condition. + * - I2C_GEN_START_READ: read data and generate start. + * - I2C_GEN_START_WRITE: send data and generate start. + * @retval i2c status. + */ +void i2c_start_transfer_dma(i2c_handle_type* hi2c, dma_channel_type* dma_channelx, uint16_t address, i2c_start_mode_type start) +{ + if (hi2c->pcount > MAX_TRANSFER_CNT) + { + hi2c->psize = MAX_TRANSFER_CNT; + + /* config dma */ + i2c_dma_config(hi2c, dma_channelx, hi2c->pbuff, hi2c->psize); + + i2c_transmit_set(hi2c->i2cx, address, hi2c->psize, I2C_RELOAD_MODE, start); + } + else + { + hi2c->psize = hi2c->pcount; + + /* config dma */ + i2c_dma_config(hi2c, dma_channelx, hi2c->pbuff, hi2c->psize); + + i2c_transmit_set(hi2c->i2cx, address, hi2c->psize, I2C_AUTO_STOP_MODE, start); + } +} + +/** + * @brief the master transmits data through polling mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_master_transmit(i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_WRITE); + + while (hi2c->pcount > 0) + { + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* send data */ + i2c_data_send(hi2c->i2cx, *hi2c->pbuff++); + hi2c->psize--; + hi2c->pcount--; + + if ((hi2c->psize == 0) && (hi2c->pcount != 0)) + { + /* wait for the tcrld flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TCRLD_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + /* continue transfer */ + i2c_start_transfer(hi2c, address, I2C_WITHOUT_START); + } + } + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + return I2C_OK; +} + +/** + * @brief the slave receive data through polling mode. + * @param hi2c: the handle points to the operation information. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_slave_receive(i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* enable acknowledge */ + i2c_ack_enable(hi2c->i2cx, TRUE); + + /* wait for the addr flag to be set */ + if (i2c_wait_flag(hi2c, I2C_ADDRF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* clear addr flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ADDRF_FLAG); + + while (hi2c->pcount > 0) + { + /* wait for the rdbf flag to be set */ + if(i2c_wait_flag(hi2c, I2C_RDBF_FLAG, I2C_EVENT_CHECK_STOP, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + /* if data is received, read data */ + if (i2c_flag_get(hi2c->i2cx, I2C_RDBF_FLAG) == SET) + { + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + } + + return I2C_ERR_STEP_4; + } + + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + } + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_5; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_6; + } + + return I2C_OK; +} + +/** + * @brief the master receive data through polling mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_master_receive(i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_READ); + + while (hi2c->pcount > 0) + { + /* wait for the rdbf flag to be set */ + if(i2c_wait_flag(hi2c, I2C_RDBF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + hi2c->psize--; + + if ((hi2c->psize == 0) && (hi2c->pcount != 0)) + { + /* wait for the tcrld flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TCRLD_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + /* continue transfer */ + i2c_start_transfer(hi2c, address, I2C_WITHOUT_START); + } + } + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + return I2C_OK; +} + +/** + * @brief the slave transmits data through polling mode. + * @param hi2c: the handle points to the operation information. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_slave_transmit(i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* enable acknowledge */ + i2c_ack_enable(hi2c->i2cx, TRUE); + + /* wait for the addr flag to be set */ + if (i2c_wait_flag(hi2c, I2C_ADDRF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + return I2C_ERR_STEP_2; + } + + /* clear addr flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ADDRF_FLAG); + + /* if 10-bit address mode is used */ + if (hi2c->i2cx->ctrl2_bit.addr10 != RESET) + { + /* wait for the addr flag to be set */ + if (i2c_wait_flag(hi2c, I2C_ADDRF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_3; + } + + /* clear addr flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ADDRF_FLAG); + } + + while (hi2c->pcount > 0) + { + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_5; + } + + /* send data */ + i2c_data_send(hi2c->i2cx, *hi2c->pbuff++); + hi2c->pcount--; + } + + /* wait for the ackfail flag to be set */ + if(i2c_wait_flag(hi2c, I2C_ACKFAIL_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_6; + } + + /* clear ack fail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_7; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_8; + } + + /* refresh tx dt register */ + i2c_refresh_txdt_register(hi2c); + + return I2C_OK; +} + +/** + * @brief the master transmits data through interrupt mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_master_transmit_int(i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_INT_MA_TX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_WRITE); + + /* enable interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_TD_INT, TRUE); + + return I2C_OK; +} + +/** + * @brief the slave receive data through interrupt mode. + * @param hi2c: the handle points to the operation information. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_slave_receive_int(i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_INT_SLA_RX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* enable acknowledge */ + i2c_ack_enable(hi2c->i2cx, TRUE); + + /* enable interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_ADDR_INT | I2C_RD_INT, TRUE); + + return I2C_OK; +} + +/** + * @brief the master receive data through interrupt mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_master_receive_int(i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_INT_MA_RX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_READ); + + /* enable interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_RD_INT, TRUE); + + return I2C_OK; +} + +/** + * @brief the slave transmits data through interrupt mode. + * @param hi2c: the handle points to the operation information. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_slave_transmit_int(i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_INT_SLA_TX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* enable acknowledge */ + i2c_ack_enable(hi2c->i2cx, TRUE); + + /* enable interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_ADDR_INT | I2C_TD_INT, TRUE); + + i2c_refresh_txdt_register(hi2c); + + return I2C_OK; +} + +/** + * @brief the master transmits data through dma mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_master_transmit_dma(i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_DMA_MA_TX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* disable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_TX, FALSE); + + /* start transfer */ + i2c_start_transfer_dma(hi2c, hi2c->dma_tx_channel, address, I2C_GEN_START_WRITE); + + /* enable i2c interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_ACKFIAL_INT, TRUE); + + /* enable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_TX, TRUE); + + return I2C_OK; +} + +/** + * @brief the slave receive data through dma mode. + * @param hi2c: the handle points to the operation information. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_slave_receive_dma(i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_DMA_SLA_RX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* disable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_RX, FALSE); + + /* config dma */ + i2c_dma_config(hi2c, hi2c->dma_rx_channel, hi2c->pbuff, size); + + /* enable acknowledge */ + i2c_ack_enable(hi2c->i2cx, TRUE); + + /* enable i2c interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ADDR_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_ERR_INT, TRUE); + + /* enable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_RX, TRUE); + + return I2C_OK; +} + +/** + * @brief the master receive data through dma mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_master_receive_dma(i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_DMA_MA_RX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* disable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_RX, FALSE); + + /* start transfer */ + i2c_start_transfer_dma(hi2c, hi2c->dma_rx_channel, address, I2C_GEN_START_READ); + + /* enable i2c interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_ACKFIAL_INT, TRUE); + + /* enable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_RX, TRUE); + + return I2C_OK; +} + +/** + * @brief the slave transmits data through dma mode. + * @param hi2c: the handle points to the operation information. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_slave_transmit_dma(i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_DMA_SLA_TX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* disable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_TX, FALSE); + + /* config dma */ + i2c_dma_config(hi2c, hi2c->dma_tx_channel, hi2c->pbuff, size); + + /* enable acknowledge */ + i2c_ack_enable(hi2c->i2cx, TRUE); + + /* enable i2c interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ADDR_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_ERR_INT, TRUE); + + /* enable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_TX, TRUE); + + return I2C_OK; +} + +/** + * @brief send memory address. + * @param hi2c: the handle points to the operation information. + * @param mem_address_width: memory address width. + * this parameter can be one of the following values: + * - I2C_MEM_ADDR_WIDIH_8: memory address is 8 bit + * - I2C_MEM_ADDR_WIDIH_16: memory address is 16 bit + * @param address: memory device address. + * @param mem_address: memory address. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_memory_address_send(i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t mem_address, int32_t timeout) +{ + i2c_status_type err_code; + + if(mem_address_width == I2C_MEM_ADDR_WIDIH_8) + { + /* send memory address */ + i2c_data_send(hi2c->i2cx, mem_address & 0xFF); + } + else + { + /* send memory address */ + i2c_data_send(hi2c->i2cx, (mem_address >> 8) & 0xFF); + + /* wait for the tdis flag to be set */ + err_code = i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout); + + if(err_code != I2C_OK) + { + return err_code; + } + + /* send memory address */ + i2c_data_send(hi2c->i2cx, mem_address & 0xFF); + } + + return I2C_OK; +} + +/** + * @brief write data to the memory device through polling mode. + * @param hi2c: the handle points to the operation information. + * @param mem_address_width: memory address width. + * this parameter can be one of the following values: + * - I2C_MEM_ADDR_WIDIH_8: memory address is 8 bit + * - I2C_MEM_ADDR_WIDIH_16: memory address is 16 bit + * @param address: memory device address. + * @param mem_address: memory address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_memory_write(i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size + mem_address_width; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_WRITE); + + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* send memory address */ + if(i2c_memory_address_send(hi2c, mem_address_width, mem_address, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + hi2c->psize -= mem_address_width; + hi2c->pcount -= mem_address_width; + + while (hi2c->pcount > 0) + { + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* send data */ + i2c_data_send(hi2c->i2cx, *hi2c->pbuff++); + hi2c->psize--; + hi2c->pcount--; + + if ((hi2c->psize == 0) && (hi2c->pcount != 0)) + { + /* wait for the tcrld flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TCRLD_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_5; + } + + /* continue transfer */ + i2c_start_transfer(hi2c, address, I2C_WITHOUT_START); + } + } + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_6; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + return I2C_OK; +} + +/** + * @brief read data from memory device through polling mode. + * @param hi2c: the handle points to the operation information. + * @param mem_address_width: memory address width. + * this parameter can be one of the following values: + * - I2C_MEM_ADDR_WIDIH_8: memory address is 8 bit + * - I2C_MEM_ADDR_WIDIH_16: memory address is 16 bit + * @param address: memory device address. + * @param mem_address: memory address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_memory_read(i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_transmit_set(hi2c->i2cx, address, mem_address_width, I2C_SOFT_STOP_MODE, I2C_GEN_START_WRITE); + + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* send memory address */ + if(i2c_memory_address_send(hi2c, mem_address_width, mem_address, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + /* wait for the tdc flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TDC_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_READ); + + while (hi2c->pcount > 0) + { + /* wait for the rdbf flag to be set */ + if (i2c_wait_flag(hi2c, I2C_RDBF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_5; + } + + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + hi2c->psize--; + + if ((hi2c->psize == 0) && (hi2c->pcount != 0)) + { + /* wait for the tcrld flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TCRLD_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_6; + } + + /* continue transfer */ + i2c_start_transfer(hi2c, address, I2C_WITHOUT_START); + } + } + + /* wait for the stop flag to be set */ + if (i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_7; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + return I2C_OK; +} + +/** + * @brief write data to the memory device through interrupt mode. + * @param hi2c: the handle points to the operation information. + * @param mem_address_width: memory address width. + * this parameter can be one of the following values: + * - I2C_MEM_ADDR_WIDIH_8: memory address is 8 bit + * - I2C_MEM_ADDR_WIDIH_16: memory address is 16 bit + * @param address: memory device address. + * @param mem_address: memory address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_memory_write_int(i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_INT_MA_TX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size + mem_address_width; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_WRITE); + + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* send memory address */ + if(i2c_memory_address_send(hi2c, mem_address_width, mem_address, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + hi2c->psize--; + hi2c->pcount--; + + /* enable interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_TD_INT, TRUE); + + return I2C_OK; +} + +/** + * @brief read data from memory device through interrupt mode. + * @param hi2c: the handle points to the operation information. + * @param mem_address_width: memory address width. + * this parameter can be one of the following values: + * - I2C_MEM_ADDR_WIDIH_8: memory address is 8 bit + * - I2C_MEM_ADDR_WIDIH_16: memory address is 16 bit + * @param address: memory device address. + * @param mem_address: memory address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_memory_read_int(i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_INT_MA_RX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_transmit_set(hi2c->i2cx, address, mem_address_width, I2C_SOFT_STOP_MODE, I2C_GEN_START_WRITE); + + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* send memory address */ + if(i2c_memory_address_send(hi2c, mem_address_width, mem_address, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + /* wait for the tdc flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TDC_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_READ); + + /* enable i2c interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_RD_INT, TRUE); + + return I2C_OK; +} + +/** + * @brief write data to the memory device through dma mode. + * @param hi2c: the handle points to the operation information. + * @param mem_address_width: memory address width. + * this parameter can be one of the following values: + * - I2C_MEM_ADDR_WIDIH_8: memory address is 8 bit + * - I2C_MEM_ADDR_WIDIH_16: memory address is 16 bit + * @param address: memory device address. + * @param mem_address: memory address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_memory_write_dma(i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_DMA_MA_TX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* disable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_TX, FALSE); + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* transfer config */ + i2c_transmit_set(hi2c->i2cx, address, mem_address_width, I2C_RELOAD_MODE, I2C_GEN_START_WRITE); + + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* send memory address */ + if(i2c_memory_address_send(hi2c, mem_address_width, mem_address, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + /* wait for the tcrld flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TCRLD_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* start transfer */ + i2c_start_transfer_dma(hi2c, hi2c->dma_tx_channel, address, I2C_WITHOUT_START); + + /* enable i2c interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_ACKFIAL_INT, TRUE); + + /* enable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_TX, TRUE); + + return I2C_OK; +} + +/** + * @brief read data from memory device through polling mode. + * @param hi2c: the handle points to the operation information. + * @param mem_address_width: memory address width. + * this parameter can be one of the following values: + * - I2C_MEM_ADDR_WIDIH_8: memory address is 8 bit + * - I2C_MEM_ADDR_WIDIH_16: memory address is 16 bit + * @param address: memory device address. + * @param mem_address: memory address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_memory_read_dma(i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->mode = I2C_DMA_MA_RX; + hi2c->status = I2C_START; + + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if(i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* start transfer */ + i2c_transmit_set(hi2c->i2cx, address, mem_address_width, I2C_SOFT_STOP_MODE, I2C_GEN_START_WRITE); + + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* send memory address */ + if(i2c_memory_address_send(hi2c, mem_address_width, mem_address, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + /* wait for the tdc flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TDC_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* disable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_RX, FALSE); + + /* start transfer */ + i2c_start_transfer_dma(hi2c, hi2c->dma_rx_channel, address, I2C_GEN_START_READ); + + /* enable i2c interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_ACKFIAL_INT, TRUE); + + /* enable dma request */ + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_RX, TRUE); + + return I2C_OK; +} + +/** + * @brief the master transmits data through SMBus mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_smbus_master_transmit(i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* enable pec calculation */ + i2c_pec_calculate_enable(hi2c->i2cx, TRUE); + + /* enable pec transmit request */ + i2c_pec_transmit_enable(hi2c->i2cx, TRUE); + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_WRITE); + + hi2c->pcount--; + + while (hi2c->pcount > 0) + { + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* send data */ + i2c_data_send(hi2c->i2cx, *hi2c->pbuff++); + hi2c->psize--; + hi2c->pcount--; + + if ((hi2c->psize == 0) && (hi2c->pcount != 0)) + { + /* wait for the tcrld flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TCRLD_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + /* continue transfer */ + i2c_start_transfer(hi2c, address, I2C_WITHOUT_START); + } + } + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + return I2C_OK; +} + +/** + * @brief the slave receive data through SMBus mode. + * @param hi2c: the handle points to the operation information. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_smbus_slave_receive(i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* enable pec calculation */ + i2c_pec_calculate_enable(hi2c->i2cx, TRUE); + + /* enable slave data control mode */ + i2c_slave_data_ctrl_enable(hi2c->i2cx, TRUE); + + /* enable acknowledge */ + i2c_ack_enable(hi2c->i2cx, TRUE); + + /* wait for the addr flag to be set */ + if (i2c_wait_flag(hi2c, I2C_ADDRF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* enable pec transmit request */ + i2c_pec_transmit_enable(hi2c->i2cx, TRUE); + + /* configure the number of bytes to be transmitted */ + i2c_cnt_set(hi2c->i2cx, hi2c->pcount); + + /* clear addr flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ADDRF_FLAG); + + while (hi2c->pcount > 0) + { + /* wait for the rdbf flag to be set */ + if(i2c_wait_flag(hi2c, I2C_RDBF_FLAG, I2C_EVENT_CHECK_STOP, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + /* if data is received, read data */ + if (i2c_flag_get(hi2c->i2cx, I2C_RDBF_FLAG) == SET) + { + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + } + + return I2C_ERR_STEP_3; + } + + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + } + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_4; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_5; + } + + /* disable slave data control mode */ + i2c_slave_data_ctrl_enable(hi2c->i2cx, FALSE); + + return I2C_OK; +} + +/** + * @brief the master receive data through SMBus mode. + * @param hi2c: the handle points to the operation information. + * @param address: slave address. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_smbus_master_receive(i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_1; + } + + /* enable pec calculation */ + i2c_pec_calculate_enable(hi2c->i2cx, TRUE); + + /* enable pec transmit request */ + i2c_pec_transmit_enable(hi2c->i2cx, TRUE); + + /* start transfer */ + i2c_start_transfer(hi2c, address, I2C_GEN_START_READ); + + while (hi2c->pcount > 0) + { + /* wait for the rdbf flag to be set */ + if(i2c_wait_flag(hi2c, I2C_RDBF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_2; + } + + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + hi2c->psize--; + + if ((hi2c->psize == 0) && (hi2c->pcount != 0)) + { + /* wait for the tcrld flag to be set */ + if (i2c_wait_flag(hi2c, I2C_TCRLD_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_3; + } + + /* continue transfer */ + i2c_start_transfer(hi2c, address, I2C_WITHOUT_START); + } + } + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + return I2C_ERR_STEP_4; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + return I2C_OK; +} + +/** + * @brief the slave transmits data through SMBus mode. + * @param hi2c: the handle points to the operation information. + * @param pdata: data buffer. + * @param size: data size. + * @param timeout: maximum waiting time. + * @retval i2c status. + */ +i2c_status_type i2c_smbus_slave_transmit(i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout) +{ + /* initialization parameters */ + hi2c->pbuff = pdata; + hi2c->pcount = size; + + hi2c->error_code = I2C_OK; + + /* enable pec calculation */ + i2c_pec_calculate_enable(hi2c->i2cx, TRUE); + + /* enable slave data control mode */ + i2c_slave_data_ctrl_enable(hi2c->i2cx, TRUE); + + /* enable acknowledge */ + i2c_ack_enable(hi2c->i2cx, TRUE); + + /* wait for the addr flag to be set */ + if (i2c_wait_flag(hi2c, I2C_ADDRF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + return I2C_ERR_STEP_1; + } + + /* if 7-bit address mode is selected */ + if (hi2c->i2cx->ctrl2_bit.addr10 == 0) + { + /* enable pec transmit request */ + i2c_pec_transmit_enable(hi2c->i2cx, TRUE); + + /* configure the number of bytes to be transmitted */ + i2c_cnt_set(hi2c->i2cx, hi2c->pcount); + } + + /* clear addr flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ADDRF_FLAG); + + /* if 10-bit address mode is used */ + if (hi2c->i2cx->ctrl2_bit.addr10 != RESET) + { + /* wait for the addr flag to be set */ + if (i2c_wait_flag(hi2c, I2C_ADDRF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_2; + } + + /* enable pec transmit request */ + i2c_pec_transmit_enable(hi2c->i2cx, TRUE); + + /* configure the number of bytes to be transmitted */ + i2c_cnt_set(hi2c->i2cx, hi2c->pcount); + + /* clear addr flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ADDRF_FLAG); + } + + hi2c->pcount--; + + while (hi2c->pcount > 0) + { + /* wait for the tdis flag to be set */ + if(i2c_wait_flag(hi2c, I2C_TDIS_FLAG, I2C_EVENT_CHECK_ACKFAIL, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_4; + } + + /* send data */ + i2c_data_send(hi2c->i2cx, *hi2c->pbuff++); + hi2c->pcount--; + } + + /* wait for the ackfail flag to be set */ + if(i2c_wait_flag(hi2c, I2C_ACKFAIL_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + return I2C_ERR_STEP_5; + } + + /* clear ack fail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + + /* wait for the stop flag to be set */ + if(i2c_wait_flag(hi2c, I2C_STOPF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_6; + } + + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* wait for the busy flag to be reset */ + if (i2c_wait_flag(hi2c, I2C_BUSYF_FLAG, I2C_EVENT_CHECK_NONE, timeout) != I2C_OK) + { + /* disable acknowledge */ + i2c_ack_enable(hi2c->i2cx, FALSE); + + return I2C_ERR_STEP_7; + } + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + /* refresh tx dt register */ + i2c_refresh_txdt_register(hi2c); + + /* disable slave data control mode */ + i2c_slave_data_ctrl_enable(hi2c->i2cx, FALSE); + + return I2C_OK; +} + +/** + * @brief master interrupt processing function in interrupt mode. + * @param hi2c: the handle points to the operation information. + * @retval i2c status. + */ +i2c_status_type i2c_master_irq_handler_int(i2c_handle_type* hi2c) +{ + if (i2c_flag_get(hi2c->i2cx, I2C_ACKFAIL_FLAG) != RESET) + { + /* clear ackfail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + + /* refresh tx register */ + i2c_refresh_txdt_register(hi2c); + + if(hi2c->pcount != 0) + { + hi2c->error_code = I2C_ERR_ACKFAIL; + } + } + else if (i2c_flag_get(hi2c->i2cx, I2C_TDIS_FLAG) != RESET) + { + /* send data */ + i2c_data_send(hi2c->i2cx, *hi2c->pbuff++); + hi2c->pcount--; + hi2c->psize--; + } + else if (i2c_flag_get(hi2c->i2cx, I2C_TCRLD_FLAG) != RESET) + { + if ((hi2c->psize == 0) && (hi2c->pcount != 0)) + { + /* continue transfer */ + i2c_start_transfer(hi2c, i2c_transfer_addr_get(hi2c->i2cx), I2C_WITHOUT_START); + } + else + { + return I2C_ERR_TCRLD; + } + } + else if (i2c_flag_get(hi2c->i2cx, I2C_RDBF_FLAG) != RESET) + { + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + hi2c->psize--; + } + else if (i2c_flag_get(hi2c->i2cx, I2C_TDC_FLAG) != RESET) + { + if (hi2c->pcount == 0) + { + if (hi2c->i2cx->ctrl2_bit.astopen == 0) + { + /* generate stop condtion */ + i2c_stop_generate(hi2c->i2cx); + } + } + else + { + return I2C_ERR_TDC; + } + } + else if (i2c_flag_get(hi2c->i2cx, I2C_STOPF_FLAG) != RESET) + { + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + if (i2c_flag_get(hi2c->i2cx, I2C_ACKFAIL_FLAG) != RESET) + { + /* clear ackfail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + } + + /* refresh tx dt register */ + i2c_refresh_txdt_register(hi2c); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_TD_INT | I2C_RD_INT, FALSE); + + /* transfer complete */ + hi2c->status = I2C_END; + } + + return I2C_OK; +} + +/** + * @brief slave interrupt processing function in interrupt mode. + * @param hi2c: the handle points to the operation information. + * @retval i2c status. + */ +i2c_status_type i2c_slave_irq_handler_int(i2c_handle_type* hi2c) +{ + if (i2c_flag_get(hi2c->i2cx, I2C_ACKFAIL_FLAG) != RESET) + { + /* transfer complete */ + if (hi2c->pcount == 0) + { + i2c_refresh_txdt_register(hi2c); + + /* clear ackfail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + } + /* the transfer has not been completed */ + else + { + /* clear ackfail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + } + } + else if (i2c_flag_get(hi2c->i2cx, I2C_ADDRF_FLAG) != RESET) + { + /* clear addr flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ADDRF_FLAG); + } + else if (i2c_flag_get(hi2c->i2cx, I2C_TDIS_FLAG) != RESET) + { + if (hi2c->pcount > 0) + { + /* send data */ + hi2c->i2cx->txdt = (*(hi2c->pbuff++)); + hi2c->psize--; + hi2c->pcount--; + } + } + else if (i2c_flag_get(hi2c->i2cx, I2C_RDBF_FLAG) != RESET) + { + if (hi2c->pcount > 0) + { + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + hi2c->pcount--; + hi2c->psize--; + } + } + else if (i2c_flag_get(hi2c->i2cx, I2C_STOPF_FLAG) != RESET) + { + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ADDR_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_ERR_INT | I2C_TDC_INT | I2C_TD_INT | I2C_RD_INT, FALSE); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + /* refresh tx dt register */ + i2c_refresh_txdt_register(hi2c); + + /* if data is received, read data */ + if (i2c_flag_get(hi2c->i2cx, I2C_RDBF_FLAG) != RESET) + { + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + + if ((hi2c->psize > 0)) + { + hi2c->pcount--; + hi2c->psize--; + } + } + + /* transfer complete */ + hi2c->status = I2C_END; + } + + return I2C_OK; +} + +/** + * @brief master interrupt processing function in dma mode. + * @param hi2c: the handle points to the operation information. + * @retval i2c status. + */ +i2c_status_type i2c_master_irq_handler_dma(i2c_handle_type* hi2c) +{ + if (i2c_flag_get(hi2c->i2cx, I2C_ACKFAIL_FLAG) != RESET) + { + /* clear ackfail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + + /* enable stop interrupt to wait for stop generate stop */ + i2c_interrupt_enable(hi2c->i2cx, I2C_STOP_INT, TRUE); + + /* refresh tx dt register */ + i2c_refresh_txdt_register(hi2c); + + if(hi2c->pcount != 0) + { + hi2c->error_code = I2C_ERR_ACKFAIL; + } + } + else if (i2c_flag_get(hi2c->i2cx, I2C_TCRLD_FLAG) != RESET) + { + /* disable tdc interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_TDC_INT, FALSE); + + if (hi2c->pcount != 0) + { + /* continue transfer */ + i2c_start_transfer(hi2c, i2c_transfer_addr_get(hi2c->i2cx), I2C_WITHOUT_START); + + /* enable dma request */ + if (hi2c->dma_init_struct.direction == DMA_DIR_MEMORY_TO_PERIPHERAL) + { + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_TX, TRUE); + } + else + { + i2c_dma_enable(hi2c->i2cx, I2C_DMA_REQUEST_RX, TRUE); + } + } + else + { + return I2C_ERR_TCRLD; + } + } + else if (i2c_flag_get(hi2c->i2cx, I2C_STOPF_FLAG) != RESET) + { + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + if (i2c_flag_get(hi2c->i2cx, I2C_ACKFAIL_FLAG) != RESET) + { + /* clear ackfail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + } + + /* refresh tx dt register */ + i2c_refresh_txdt_register(hi2c); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT | I2C_TDC_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_TD_INT | I2C_RD_INT, FALSE); + + /* transfer complete */ + hi2c->status = I2C_END; + } + + return I2C_OK; +} + +/** + * @brief slave interrupt processing function in dma mode. + * @param hi2c: the handle points to the operation information. + * @retval i2c status. + */ +i2c_status_type i2c_slave_irq_handler_dma(i2c_handle_type* hi2c) +{ + if (i2c_flag_get(hi2c->i2cx, I2C_ACKFAIL_FLAG) != RESET) + { + /* clear ackfail flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ACKFAIL_FLAG); + } + else if (i2c_flag_get(hi2c->i2cx, I2C_ADDRF_FLAG) != RESET) + { + /* clear addr flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ADDRF_FLAG); + } + else if (i2c_flag_get(hi2c->i2cx, I2C_STOPF_FLAG) != RESET) + { + /* clear stop flag */ + i2c_flag_clear(hi2c->i2cx, I2C_STOPF_FLAG); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ADDR_INT | I2C_STOP_INT | I2C_ACKFIAL_INT | I2C_ERR_INT | I2C_TDC_INT | I2C_TD_INT | I2C_RD_INT, FALSE); + + /* reset ctrl2 register */ + i2c_reset_ctrl2_register(hi2c); + + /* refresh tx dt register */ + i2c_refresh_txdt_register(hi2c); + + /* if data is received, read data */ + if (i2c_flag_get(hi2c->i2cx, I2C_RDBF_FLAG) != RESET) + { + /* read data */ + (*hi2c->pbuff++) = i2c_data_receive(hi2c->i2cx); + + if ((hi2c->psize > 0)) + { + hi2c->pcount--; + hi2c->psize--; + } + } + + /* transfer complete */ + hi2c->status = I2C_END; + } + + return I2C_OK; +} + +/** + * @brief dma processing function. + * @param hi2c: the handle points to the operation information. + * @retval none. + */ +void i2c_dma_tx_rx_irq_handler(i2c_handle_type* hi2c, dma_channel_type* dma_channel) +{ + /* transfer complete */ + if (dma_flag_get(DMA_GET_TC_FLAG(dma_channel)) != RESET) + { + /* disable the transfer complete interrupt */ + dma_interrupt_enable(dma_channel, DMA_FDT_INT, FALSE); + + /* clear the transfer complete flag */ + dma_flag_clear(DMA_GET_TC_FLAG(dma_channel)); + + /* disable dma request */ + i2c_dma_enable(hi2c->i2cx, DMA_GET_REQUEST(dma_channel), FALSE); + + /* disable dma channel */ + dma_channel_enable(dma_channel, FALSE); + + switch(hi2c->mode) + { + case I2C_DMA_MA_TX: + case I2C_DMA_MA_RX: + { + /* update the number of transfers */ + hi2c->pcount -= hi2c->psize; + + /* transfer complete */ + if (hi2c->pcount == 0) + { + /* enable stop interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_STOP_INT, TRUE); + } + /* the transfer has not been completed */ + else + { + /* update the buffer pointer of transfers */ + hi2c->pbuff += hi2c->psize; + + /* set the number to be transferred */ + if (hi2c->pcount > MAX_TRANSFER_CNT) + { + hi2c->psize = MAX_TRANSFER_CNT; + } + else + { + hi2c->psize = hi2c->pcount; + } + + /* config dma channel, continue to transfer data */ + i2c_dma_config(hi2c, dma_channel, hi2c->pbuff, hi2c->psize); + + /* enable tdc interrupt */ + i2c_interrupt_enable(hi2c->i2cx, I2C_TDC_INT, TRUE); + } + }break; + case I2C_DMA_SLA_TX: + case I2C_DMA_SLA_RX: + { + + }break; + + default:break; + } + } +} + +/** + * @brief dma transmission complete interrupt function. + * @param hi2c: the handle points to the operation information. + * @retval none. + */ +void i2c_dma_tx_irq_handler(i2c_handle_type* hi2c) +{ + i2c_dma_tx_rx_irq_handler(hi2c, hi2c->dma_tx_channel); +} + +/** + * @brief dma reveive complete interrupt function. + * @param hi2c: the handle points to the operation information. + * @retval none. + */ +void i2c_dma_rx_irq_handler(i2c_handle_type* hi2c) +{ + i2c_dma_tx_rx_irq_handler(hi2c, hi2c->dma_rx_channel); +} + +/** + * @brief interrupt procession function. + * @param hi2c: the handle points to the operation information. + * @retval none. + */ +void i2c_evt_irq_handler(i2c_handle_type* hi2c) +{ + switch(hi2c->mode) + { + case I2C_INT_MA_TX: + case I2C_INT_MA_RX: + { + i2c_master_irq_handler_int(hi2c); + }break; + case I2C_INT_SLA_TX: + case I2C_INT_SLA_RX: + { + i2c_slave_irq_handler_int(hi2c); + }break; + case I2C_DMA_MA_TX: + case I2C_DMA_MA_RX: + { + i2c_master_irq_handler_dma(hi2c); + }break; + case I2C_DMA_SLA_TX: + case I2C_DMA_SLA_RX: + { + i2c_slave_irq_handler_dma(hi2c); + }break; + + default:break; + } +} + +/** + * @brief dma reveive complete interrupt function. + * @param hi2c: the handle points to the operation information. + * @retval none. + */ +void i2c_err_irq_handler(i2c_handle_type* hi2c) +{ + /* buserr */ + if (i2c_flag_get(hi2c->i2cx, I2C_BUSERR_FLAG) != RESET) + { + hi2c->error_code = I2C_ERR_INTERRUPT; + + /* clear flag */ + i2c_flag_clear(hi2c->i2cx, I2C_BUSERR_FLAG); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT, FALSE); + } + + /* arlost */ + if (i2c_flag_get(hi2c->i2cx, I2C_ARLOST_FLAG) != RESET) + { + hi2c->error_code = I2C_ERR_INTERRUPT; + + /* clear flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ARLOST_FLAG); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT, FALSE); + } + + /* ouf */ + if (i2c_flag_get(hi2c->i2cx, I2C_OUF_FLAG) != RESET) + { + hi2c->error_code = I2C_ERR_INTERRUPT; + + /* clear flag */ + i2c_flag_clear(hi2c->i2cx, I2C_OUF_FLAG); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT, FALSE); + } + + /* pecerr */ + if (i2c_flag_get(hi2c->i2cx, I2C_PECERR_FLAG) != RESET) + { + hi2c->error_code = I2C_ERR_INTERRUPT; + + /* clear flag */ + i2c_flag_clear(hi2c->i2cx, I2C_PECERR_FLAG); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT, FALSE); + + } + + /* timeout */ + if (i2c_flag_get(hi2c->i2cx, I2C_TMOUT_FLAG) != RESET) + { + hi2c->error_code = I2C_ERR_INTERRUPT; + + /* clear flag */ + i2c_flag_clear(hi2c->i2cx, I2C_TMOUT_FLAG); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT, FALSE); + } + + /* alertf */ + if (i2c_flag_get(hi2c->i2cx, I2C_ALERTF_FLAG) != RESET) + { + hi2c->error_code = I2C_ERR_INTERRUPT; + + /* clear flag */ + i2c_flag_clear(hi2c->i2cx, I2C_ALERTF_FLAG); + + /* disable interrupts */ + i2c_interrupt_enable(hi2c->i2cx, I2C_ERR_INT, FALSE); + } +} + +/** + * @} + */ diff --git a/armlib/at32_i2c/at32f435_437_i2c_app.h b/armlib/at32_i2c/at32f435_437_i2c_app.h new file mode 100644 index 000000000..9852eebe5 --- /dev/null +++ b/armlib/at32_i2c/at32f435_437_i2c_app.h @@ -0,0 +1,197 @@ +/** + ************************************************************************** + * @file at32f435_437_i2c_app.h + * @brief i2c application libray header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/*!< define to prevent recursive inclusion -------------------------------------*/ +#ifndef __I2C_APPLICATION_H +#define __I2C_APPLICATION_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" +#include "at32f435_437_i2c.h" +#include "at32f435_437_dma.h" + +/** @addtogroup AT32F435_437_middlewares_i2c_application_library + * @{ + */ + + +/** @defgroup I2C_library_event_check_flag + * @{ + */ + +#define I2C_EVENT_CHECK_NONE ((uint32_t)0x00000000) /*!< check flag none */ +#define I2C_EVENT_CHECK_ACKFAIL ((uint32_t)0x00000001) /*!< check flag ackfail */ +#define I2C_EVENT_CHECK_STOP ((uint32_t)0x00000002) /*!< check flag stop */ + +/** + * @} + */ + +/** @defgroup I2C_library_memory_address_width_mode + * @{ + */ + +typedef enum +{ + I2C_MEM_ADDR_WIDIH_8 = 0x01, /*!< memory address is 8 bit */ + I2C_MEM_ADDR_WIDIH_16 = 0x02, /*!< memory address is 16 bit */ +} i2c_mem_address_width_type; + +/** + * @} + */ + +/** @defgroup I2C_library_transmission_mode + * @{ + */ + +typedef enum +{ + I2C_INT_MA_TX = 0, + I2C_INT_MA_RX, + I2C_INT_SLA_TX, + I2C_INT_SLA_RX, + I2C_DMA_MA_TX, + I2C_DMA_MA_RX, + I2C_DMA_SLA_TX, + I2C_DMA_SLA_RX, +} i2c_mode_type; + +/** + * @} + */ + +/** @defgroup I2C_library_status_code + * @{ + */ + +typedef enum +{ + I2C_OK = 0, /*!< no error */ + I2C_ERR_STEP_1, /*!< step 1 error */ + I2C_ERR_STEP_2, /*!< step 2 error */ + I2C_ERR_STEP_3, /*!< step 3 error */ + I2C_ERR_STEP_4, /*!< step 4 error */ + I2C_ERR_STEP_5, /*!< step 5 error */ + I2C_ERR_STEP_6, /*!< step 6 error */ + I2C_ERR_STEP_7, /*!< step 7 error */ + I2C_ERR_STEP_8, /*!< step 8 error */ + I2C_ERR_STEP_9, /*!< step 9 error */ + I2C_ERR_STEP_10, /*!< step 10 error */ + I2C_ERR_STEP_11, /*!< step 11 error */ + I2C_ERR_STEP_12, /*!< step 12 error */ + I2C_ERR_TCRLD, /*!< tcrld error */ + I2C_ERR_TDC, /*!< tdc error */ + I2C_ERR_ADDR, /*!< addr error */ + I2C_ERR_STOP, /*!< stop error */ + I2C_ERR_ACKFAIL, /*!< ackfail error */ + I2C_ERR_TIMEOUT, /*!< timeout error */ + I2C_ERR_INTERRUPT, /*!< interrupt error */ +} i2c_status_type; + +/** + * @} + */ + +/** @defgroup I2C_library_handler + * @{ + */ + +typedef struct +{ + i2c_type *i2cx; /*!< i2c registers base address */ + uint8_t *pbuff; /*!< pointer to i2c transfer buffer */ + __IO uint16_t psize; /*!< i2c transfer size */ + __IO uint16_t pcount; /*!< i2c transfer counter */ + __IO uint32_t mode; /*!< i2c communication mode */ + __IO uint32_t status; /*!< i2c communication status */ + __IO i2c_status_type error_code; /*!< i2c error code */ + dma_channel_type *dma_tx_channel; /*!< dma transmit channel */ + dma_channel_type *dma_rx_channel; /*!< dma receive channel */ + dma_init_type dma_init_struct; /*!< dma init parameters */ +} i2c_handle_type; + +/** + * @} + */ + +/** @defgroup I2C_library_exported_functions + * @{ + */ + +void i2c_config (i2c_handle_type* hi2c); +void i2c_lowlevel_init (i2c_handle_type* hi2c); +void i2c_reset_ctrl2_register (i2c_handle_type* hi2c); +i2c_status_type i2c_wait_end (i2c_handle_type* hi2c, uint32_t timeout); +i2c_status_type i2c_wait_flag (i2c_handle_type* hi2c, uint32_t flag, uint32_t event_check, uint32_t timeout); + +i2c_status_type i2c_master_transmit (i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_master_receive (i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_slave_transmit (i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_slave_receive (i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout); + +i2c_status_type i2c_master_transmit_int (i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_master_receive_int (i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_slave_transmit_int (i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_slave_receive_int (i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout); + +i2c_status_type i2c_master_transmit_dma (i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_master_receive_dma (i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_slave_transmit_dma (i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_slave_receive_dma (i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout); + +i2c_status_type i2c_smbus_master_transmit (i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_smbus_master_receive (i2c_handle_type* hi2c, uint16_t address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_smbus_slave_transmit (i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_smbus_slave_receive (i2c_handle_type* hi2c, uint8_t* pdata, uint16_t size, uint32_t timeout); + +i2c_status_type i2c_memory_write (i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_memory_write_int (i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_memory_write_dma (i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_memory_read (i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_memory_read_int (i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout); +i2c_status_type i2c_memory_read_dma (i2c_handle_type* hi2c, i2c_mem_address_width_type mem_address_width, uint16_t address, uint16_t mem_address, uint8_t* pdata, uint16_t size, uint32_t timeout); + +void i2c_evt_irq_handler (i2c_handle_type* hi2c); +void i2c_err_irq_handler (i2c_handle_type* hi2c); +void i2c_dma_tx_irq_handler (i2c_handle_type* hi2c); +void i2c_dma_rx_irq_handler (i2c_handle_type* hi2c); + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/at32f435_437_conf.h b/armlib/at32_sys/at32f435_437_conf.h new file mode 100644 index 000000000..18a093954 --- /dev/null +++ b/armlib/at32_sys/at32f435_437_conf.h @@ -0,0 +1,186 @@ +/** + ************************************************************************** + * @file at32f435_437_conf.h + * @brief at32f435_437 config header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_CONF_H +#define __AT32F435_437_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief in the following line adjust the value of high speed external crystal (hext) + * used in your application + * + * tip: to avoid modifying this file each time you need to use different hext, you + * can define the hext value in your toolchain compiler preprocessor. + * + */ +#if !defined HEXT_VALUE +#define HEXT_VALUE ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */ +#endif + +/** + * @brief in the following line adjust the high speed external crystal (hext) startup + * timeout value + */ +#define HEXT_STARTUP_TIMEOUT ((uint16_t)0x3000) /*!< time out for hext start up */ +#define HICK_VALUE ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */ +#define LEXT_VALUE ((uint32_t)32768) /*!< value of the low speed external clock in hz */ + + +/* + * Do not import any at32f435_437_xxx header file in this file. + * This will cause developers who only want to include the at32f435_437 header file to get a bunch of unnecessary contents, + * which will lead to possible conflicts of variable/function names!!! + * --- + * So all the module enable definitions below have been moved to CMakeLists.txt, + * and all the driver header files of at32f435_437_xxx are included only when they are used. + * --- + * If you do not do this, the 'usart_init ' function in the usart driver of at32 will cause the conflicting types error by pm3's usart module . + */ + + +/* module define -------------------------------------------------------------*/ +// #define CRM_MODULE_ENABLED +// #define TMR_MODULE_ENABLED +// #define ERTC_MODULE_ENABLED +// #define GPIO_MODULE_ENABLED +// #define I2C_MODULE_ENABLED +// #define USART_MODULE_ENABLED +// #define PWC_MODULE_ENABLED +// #define CAN_MODULE_ENABLED +// #define ADC_MODULE_ENABLED +// #define DAC_MODULE_ENABLED +// #define SPI_MODULE_ENABLED +// #define EDMA_MODULE_ENABLED +// #define DMA_MODULE_ENABLED +// #define DEBUG_MODULE_ENABLED +// #define FLASH_MODULE_ENABLED +// #define CRC_MODULE_ENABLED +// #define WWDT_MODULE_ENABLED +// #define WDT_MODULE_ENABLED +// #define EXINT_MODULE_ENABLED +// #define SDIO_MODULE_ENABLED +// #define XMC_MODULE_ENABLED +// #define USB_MODULE_ENABLED +// #define ACC_MODULE_ENABLED +// #define MISC_MODULE_ENABLED +// #define QSPI_MODULE_ENABLED +// #define DVP_MODULE_ENABLED +// #define SCFG_MODULE_ENABLED +// #define EMAC_MODULE_ENABLED + +/* includes ------------------------------------------------------------------*/ +// #ifdef CRM_MODULE_ENABLED +// #include "at32f435_437_crm.h" +// #endif +// #ifdef TMR_MODULE_ENABLED +// #include "at32f435_437_tmr.h" +// #endif +// #ifdef ERTC_MODULE_ENABLED +// #include "at32f435_437_ertc.h" +// #endif +// #ifdef GPIO_MODULE_ENABLED +// #include "at32f435_437_gpio.h" +// #endif +// #ifdef I2C_MODULE_ENABLED +// #include "at32f435_437_i2c.h" +// #endif +// #ifdef USART_MODULE_ENABLED +// #include "at32f435_437_usart.h" +// #endif +// #ifdef PWC_MODULE_ENABLED +// #include "at32f435_437_pwc.h" +// #endif +// #ifdef CAN_MODULE_ENABLED +// #include "at32f435_437_can.h" +// #endif +// #ifdef ADC_MODULE_ENABLED +// #include "at32f435_437_adc.h" +// #endif +// #ifdef DAC_MODULE_ENABLED +// #include "at32f435_437_dac.h" +// #endif +// #ifdef SPI_MODULE_ENABLED +// #include "at32f435_437_spi.h" +// #endif +// #ifdef DMA_MODULE_ENABLED +// #include "at32f435_437_dma.h" +// #endif +// #ifdef DEBUG_MODULE_ENABLED +// #include "at32f435_437_debug.h" +// #endif +// #ifdef FLASH_MODULE_ENABLED +// #include "at32f435_437_flash.h" +// #endif +// #ifdef CRC_MODULE_ENABLED +// #include "at32f435_437_crc.h" +// #endif +// #ifdef WWDT_MODULE_ENABLED +// #include "at32f435_437_wwdt.h" +// #endif +// #ifdef WDT_MODULE_ENABLED +// #include "at32f435_437_wdt.h" +// #endif +// #ifdef EXINT_MODULE_ENABLED +// #include "at32f435_437_exint.h" +// #endif +// #ifdef SDIO_MODULE_ENABLED +// #include "at32f435_437_sdio.h" +// #endif +// #ifdef XMC_MODULE_ENABLED +// #include "at32f435_437_xmc.h" +// #endif +// #ifdef ACC_MODULE_ENABLED +// #include "at32f435_437_acc.h" +// #endif +// #ifdef MISC_MODULE_ENABLED +// #include "at32f435_437_misc.h" +// #endif +// #ifdef EDMA_MODULE_ENABLED +// #include "at32f435_437_edma.h" +// #endif +// #ifdef QSPI_MODULE_ENABLED +// #include "at32f435_437_qspi.h" +// #endif +// #ifdef SCFG_MODULE_ENABLED +// #include "at32f435_437_scfg.h" +// #endif +// #ifdef EMAC_MODULE_ENABLED +// #include "at32f435_437_emac.h" +// #endif +// #ifdef DVP_MODULE_ENABLED +// #include "at32f435_437_dvp.h" +// #endif +// #ifdef USB_MODULE_ENABLED +// #include "at32f435_437_usb.h" +// #endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_common_tables.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_common_tables.h new file mode 100644 index 000000000..3e72c806a --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_common_tables.h @@ -0,0 +1,539 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_common_tables.h + * Description: Extern declaration for common tables + * + * @version V1.10.0 + * @date 08 July 2021 + * + * Target Processor: Cortex-M and Cortex-A cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_COMMON_TABLES_H +#define _ARM_COMMON_TABLES_H + +#include "arm_math_types.h" +#include "dsp/fast_math_functions.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) + /* Double Precision Float CFFT twiddles */ + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREV_1024) + extern const uint16_t armBitRevTable[1024]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_16) + extern const uint64_t twiddleCoefF64_16[32]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_32) + extern const uint64_t twiddleCoefF64_32[64]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_64) + extern const uint64_t twiddleCoefF64_64[128]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_128) + extern const uint64_t twiddleCoefF64_128[256]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_256) + extern const uint64_t twiddleCoefF64_256[512]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_512) + extern const uint64_t twiddleCoefF64_512[1024]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_1024) + extern const uint64_t twiddleCoefF64_1024[2048]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_2048) + extern const uint64_t twiddleCoefF64_2048[4096]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F64_4096) + extern const uint64_t twiddleCoefF64_4096[8192]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_16) + extern const float32_t twiddleCoef_16[32]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_32) + extern const float32_t twiddleCoef_32[64]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_64) + extern const float32_t twiddleCoef_64[128]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_128) + extern const float32_t twiddleCoef_128[256]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_256) + extern const float32_t twiddleCoef_256[512]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_512) + extern const float32_t twiddleCoef_512[1024]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_1024) + extern const float32_t twiddleCoef_1024[2048]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_2048) + extern const float32_t twiddleCoef_2048[4096]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_4096) + extern const float32_t twiddleCoef_4096[8192]; + #define twiddleCoef twiddleCoef_4096 + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + /* Q31 */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_16) + extern const q31_t twiddleCoef_16_q31[24]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_32) + extern const q31_t twiddleCoef_32_q31[48]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_64) + extern const q31_t twiddleCoef_64_q31[96]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_128) + extern const q31_t twiddleCoef_128_q31[192]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_256) + extern const q31_t twiddleCoef_256_q31[384]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_512) + extern const q31_t twiddleCoef_512_q31[768]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_1024) + extern const q31_t twiddleCoef_1024_q31[1536]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_2048) + extern const q31_t twiddleCoef_2048_q31[3072]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_4096) + extern const q31_t twiddleCoef_4096_q31[6144]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_16) + extern const q15_t twiddleCoef_16_q15[24]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_32) + extern const q15_t twiddleCoef_32_q15[48]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_64) + extern const q15_t twiddleCoef_64_q15[96]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_128) + extern const q15_t twiddleCoef_128_q15[192]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_256) + extern const q15_t twiddleCoef_256_q15[384]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_512) + extern const q15_t twiddleCoef_512_q15[768]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_1024) + extern const q15_t twiddleCoef_1024_q15[1536]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_2048) + extern const q15_t twiddleCoef_2048_q15[3072]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_4096) + extern const q15_t twiddleCoef_4096_q15[6144]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + /* Double Precision Float RFFT twiddles */ + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F64_32) + extern const uint64_t twiddleCoefF64_rfft_32[32]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F64_64) + extern const uint64_t twiddleCoefF64_rfft_64[64]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F64_128) + extern const uint64_t twiddleCoefF64_rfft_128[128]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F64_256) + extern const uint64_t twiddleCoefF64_rfft_256[256]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F64_512) + extern const uint64_t twiddleCoefF64_rfft_512[512]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F64_1024) + extern const uint64_t twiddleCoefF64_rfft_1024[1024]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F64_2048) + extern const uint64_t twiddleCoefF64_rfft_2048[2048]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F64_4096) + extern const uint64_t twiddleCoefF64_rfft_4096[4096]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F32_32) + extern const float32_t twiddleCoef_rfft_32[32]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F32_64) + extern const float32_t twiddleCoef_rfft_64[64]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F32_128) + extern const float32_t twiddleCoef_rfft_128[128]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F32_256) + extern const float32_t twiddleCoef_rfft_256[256]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F32_512) + extern const float32_t twiddleCoef_rfft_512[512]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F32_1024) + extern const float32_t twiddleCoef_rfft_1024[1024]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F32_2048) + extern const float32_t twiddleCoef_rfft_2048[2048]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F32_4096) + extern const float32_t twiddleCoef_rfft_4096[4096]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + + /* Double precision floating-point bit reversal tables */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_16) + #define ARMBITREVINDEXTABLEF64_16_TABLE_LENGTH ((uint16_t)12) + extern const uint16_t armBitRevIndexTableF64_16[ARMBITREVINDEXTABLEF64_16_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_32) + #define ARMBITREVINDEXTABLEF64_32_TABLE_LENGTH ((uint16_t)24) + extern const uint16_t armBitRevIndexTableF64_32[ARMBITREVINDEXTABLEF64_32_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_64) + #define ARMBITREVINDEXTABLEF64_64_TABLE_LENGTH ((uint16_t)56) + extern const uint16_t armBitRevIndexTableF64_64[ARMBITREVINDEXTABLEF64_64_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_128) + #define ARMBITREVINDEXTABLEF64_128_TABLE_LENGTH ((uint16_t)112) + extern const uint16_t armBitRevIndexTableF64_128[ARMBITREVINDEXTABLEF64_128_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_256) + #define ARMBITREVINDEXTABLEF64_256_TABLE_LENGTH ((uint16_t)240) + extern const uint16_t armBitRevIndexTableF64_256[ARMBITREVINDEXTABLEF64_256_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_512) + #define ARMBITREVINDEXTABLEF64_512_TABLE_LENGTH ((uint16_t)480) + extern const uint16_t armBitRevIndexTableF64_512[ARMBITREVINDEXTABLEF64_512_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_1024) + #define ARMBITREVINDEXTABLEF64_1024_TABLE_LENGTH ((uint16_t)992) + extern const uint16_t armBitRevIndexTableF64_1024[ARMBITREVINDEXTABLEF64_1024_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_2048) + #define ARMBITREVINDEXTABLEF64_2048_TABLE_LENGTH ((uint16_t)1984) + extern const uint16_t armBitRevIndexTableF64_2048[ARMBITREVINDEXTABLEF64_2048_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT64_4096) + #define ARMBITREVINDEXTABLEF64_4096_TABLE_LENGTH ((uint16_t)4032) + extern const uint16_t armBitRevIndexTableF64_4096[ARMBITREVINDEXTABLEF64_4096_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + /* floating-point bit reversal tables */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_16) + #define ARMBITREVINDEXTABLE_16_TABLE_LENGTH ((uint16_t)20) + extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE_16_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_32) + #define ARMBITREVINDEXTABLE_32_TABLE_LENGTH ((uint16_t)48) + extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE_32_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_64) + #define ARMBITREVINDEXTABLE_64_TABLE_LENGTH ((uint16_t)56) + extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE_64_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_128) + #define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208) + extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_256) + #define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440) + extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_512) + #define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448) + extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_1024) + #define ARMBITREVINDEXTABLE_1024_TABLE_LENGTH ((uint16_t)1800) + extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE_1024_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_2048) + #define ARMBITREVINDEXTABLE_2048_TABLE_LENGTH ((uint16_t)3808) + extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE_2048_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FLT_4096) + #define ARMBITREVINDEXTABLE_4096_TABLE_LENGTH ((uint16_t)4032) + extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE_4096_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + + /* fixed-point bit reversal tables */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_16) + #define ARMBITREVINDEXTABLE_FIXED_16_TABLE_LENGTH ((uint16_t)12) + extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED_16_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_32) + #define ARMBITREVINDEXTABLE_FIXED_32_TABLE_LENGTH ((uint16_t)24) + extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED_32_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_64) + #define ARMBITREVINDEXTABLE_FIXED_64_TABLE_LENGTH ((uint16_t)56) + extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED_64_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_128) + #define ARMBITREVINDEXTABLE_FIXED_128_TABLE_LENGTH ((uint16_t)112) + extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED_128_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_256) + #define ARMBITREVINDEXTABLE_FIXED_256_TABLE_LENGTH ((uint16_t)240) + extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED_256_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_512) + #define ARMBITREVINDEXTABLE_FIXED_512_TABLE_LENGTH ((uint16_t)480) + extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED_512_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_1024) + #define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992) + extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_2048) + #define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984) + extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_BITREVIDX_FXT_4096) + #define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032) + extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_REALCOEF_F32) + extern const float32_t realCoefA[8192]; + extern const float32_t realCoefB[8192]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_REALCOEF_Q31) + extern const q31_t realCoefAQ31[8192]; + extern const q31_t realCoefBQ31[8192]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_REALCOEF_Q15) + extern const q15_t realCoefAQ15[8192]; + extern const q15_t realCoefBQ15[8192]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_F32_128) + extern const float32_t Weights_128[256]; + extern const float32_t cos_factors_128[128]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_F32_512) + extern const float32_t Weights_512[1024]; + extern const float32_t cos_factors_512[512]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_F32_2048) + extern const float32_t Weights_2048[4096]; + extern const float32_t cos_factors_2048[2048]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_F32_8192) + extern const float32_t Weights_8192[16384]; + extern const float32_t cos_factors_8192[8192]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_Q15_128) + extern const q15_t WeightsQ15_128[256]; + extern const q15_t cos_factorsQ15_128[128]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_Q15_512) + extern const q15_t WeightsQ15_512[1024]; + extern const q15_t cos_factorsQ15_512[512]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_Q15_2048) + extern const q15_t WeightsQ15_2048[4096]; + extern const q15_t cos_factorsQ15_2048[2048]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_Q15_8192) + extern const q15_t WeightsQ15_8192[16384]; + extern const q15_t cos_factorsQ15_8192[8192]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_Q31_128) + extern const q31_t WeightsQ31_128[256]; + extern const q31_t cos_factorsQ31_128[128]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_Q31_512) + extern const q31_t WeightsQ31_512[1024]; + extern const q31_t cos_factorsQ31_512[512]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_Q31_2048) + extern const q31_t WeightsQ31_2048[4096]; + extern const q31_t cos_factorsQ31_2048[2048]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_DCT4_Q31_8192) + extern const q31_t WeightsQ31_8192[16384]; + extern const q31_t cos_factorsQ31_8192[8192]; + #endif + +#endif /* if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_TABLES) */ + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FAST_ALLOW_TABLES) + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_RECIP_Q15) + extern const q15_t armRecipTableQ15[64]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) defined(ARM_ALL_FAST_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_RECIP_Q31) + extern const q31_t armRecipTableQ31[64]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) defined(ARM_ALL_FAST_TABLES) */ + + /* Tables for Fast Math Sine and Cosine */ + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_SIN_F32) + extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) defined(ARM_ALL_FAST_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_SIN_Q31) + extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) defined(ARM_ALL_FAST_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_SIN_Q15) + extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) defined(ARM_ALL_FAST_TABLES) */ + + /* Fast vector sqrt */ + #if defined(ARM_MATH_MVEI) && !defined(ARM_MATH_AUTOVECTORIZE) + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_FAST_SQRT_Q31_MVE) + extern const q31_t sqrtTable_Q31[256]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) defined(ARM_ALL_FAST_TABLES) */ + #endif + + /* Accurate scalar sqrt */ + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_SQRT_Q31) + extern const q31_t sqrt_initial_lut_q31[32]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_SQRT_Q15) + extern const q15_t sqrt_initial_lut_q15[16]; + #endif + + #if defined(ARM_MATH_MVEI) && !defined(ARM_MATH_AUTOVECTORIZE) + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_FAST_SQRT_Q15_MVE) + extern const q15_t sqrtTable_Q15[256]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) defined(ARM_ALL_FAST_TABLES) */ + #endif + +#endif /* if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FAST_TABLES) */ + +#if (defined(ARM_MATH_MVEF) || defined(ARM_MATH_HELIUM)) && !defined(ARM_MATH_AUTOVECTORIZE) + extern const float32_t exp_tab[8]; + extern const float32_t __logf_lut_f32[8]; +#endif /* (defined(ARM_MATH_MVEF) || defined(ARM_MATH_HELIUM)) && !defined(ARM_MATH_AUTOVECTORIZE) */ + +#if (defined(ARM_MATH_MVEI) || defined(ARM_MATH_HELIUM)) && !defined(ARM_MATH_AUTOVECTORIZE) +extern const unsigned char hwLUT[256]; +#endif /* (defined(ARM_MATH_MVEI) || defined(ARM_MATH_HELIUM)) */ + +#ifdef __cplusplus +} +#endif + +#endif /* ARM_COMMON_TABLES_H */ + diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_common_tables_f16.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_common_tables_f16.h new file mode 100644 index 000000000..f9a63fee8 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_common_tables_f16.h @@ -0,0 +1,132 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_common_tables_f16.h + * Description: Extern declaration for common tables + * + * @version V1.10.0 + * @date 08 July 2021 + * + * Target Processor: Cortex-M and Cortex-A cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_COMMON_TABLES_F16_H +#define _ARM_COMMON_TABLES_F16_H + +#include "arm_math_types_f16.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) + + /* F16 */ + #if !defined(__CC_ARM) && defined(ARM_FLOAT16_SUPPORTED) + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_16) + extern const float16_t twiddleCoefF16_16[32]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_32) + extern const float16_t twiddleCoefF16_32[64]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_64) + extern const float16_t twiddleCoefF16_64[128]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_128) + extern const float16_t twiddleCoefF16_128[256]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_256) + extern const float16_t twiddleCoefF16_256[512]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_512) + extern const float16_t twiddleCoefF16_512[1024]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_1024) + extern const float16_t twiddleCoefF16_1024[2048]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_2048) + extern const float16_t twiddleCoefF16_2048[4096]; + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_4096) + extern const float16_t twiddleCoefF16_4096[8192]; + #define twiddleCoefF16 twiddleCoefF16_4096 + #endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) */ + + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F16_32) + extern const float16_t twiddleCoefF16_rfft_32[32]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F16_64) + extern const float16_t twiddleCoefF16_rfft_64[64]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F16_128) + extern const float16_t twiddleCoefF16_rfft_128[128]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F16_256) + extern const float16_t twiddleCoefF16_rfft_256[256]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F16_512) + extern const float16_t twiddleCoefF16_rfft_512[512]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F16_1024) + extern const float16_t twiddleCoefF16_rfft_1024[1024]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F16_2048) + extern const float16_t twiddleCoefF16_rfft_2048[2048]; + #endif + + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_RFFT_F16_4096) + extern const float16_t twiddleCoefF16_rfft_4096[4096]; + #endif + + #endif /* ARMAC5 */ + +#endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) */ + +#if !defined(__CC_ARM) && defined(ARM_FLOAT16_SUPPORTED) + +#if (defined(ARM_MATH_MVEF) || defined(ARM_MATH_HELIUM)) && !defined(ARM_MATH_AUTOVECTORIZE) + extern const float16_t exp_tab_f16[8]; + extern const float16_t __logf_lut_f16[8]; +#endif /* (defined(ARM_MATH_MVEF) || defined(ARM_MATH_HELIUM)) && !defined(ARM_MATH_AUTOVECTORIZE) */ +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* _ARM_COMMON_TABLES_F16_H */ + + diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_const_structs.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_const_structs.h new file mode 100644 index 000000000..59026db5d --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_const_structs.h @@ -0,0 +1,86 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_const_structs.h + * Description: Constant structs that are initialized for user convenience. + * For example, some can be given as arguments to the arm_cfft_f32() function. + * + * @version V1.10.0 + * @date 08 July 2021 + * + * Target Processor: Cortex-M and Cortex-A cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_CONST_STRUCTS_H +#define _ARM_CONST_STRUCTS_H + +#include "arm_math_types.h" +#include "arm_common_tables.h" +#include "dsp/transform_functions.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len16; + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len32; + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len64; + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len128; + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len256; + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len512; + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len1024; + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len2048; + extern const arm_cfft_instance_f64 arm_cfft_sR_f64_len4096; + + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048; + extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096; + + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048; + extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096; + + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048; + extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096; + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_const_structs_f16.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_const_structs_f16.h new file mode 100644 index 000000000..0984d74a2 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_const_structs_f16.h @@ -0,0 +1,77 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_const_structs_f16.h + * Description: Constant structs that are initialized for user convenience. + * For example, some can be given as arguments to the arm_cfft_f16() function. + * + * @version V1.10.0 + * @date 08 July 2021 + * + * Target Processor: Cortex-M and Cortex-A cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_CONST_STRUCTS_F16_H +#define _ARM_CONST_STRUCTS_F16_H + +#include "arm_math_types_f16.h" +#include "arm_common_tables.h" +#include "arm_common_tables_f16.h" +#include "dsp/transform_functions_f16.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +#if !defined(__CC_ARM) && defined(ARM_FLOAT16_SUPPORTED) + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_16) && defined(ARM_TABLE_BITREVIDX_FLT_16)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len16; + #endif + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_32) && defined(ARM_TABLE_BITREVIDX_FLT_32)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len32; + #endif + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_64) && defined(ARM_TABLE_BITREVIDX_FLT_64)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len64; + #endif + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_128) && defined(ARM_TABLE_BITREVIDX_FLT_128)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len128; + #endif + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_256) && defined(ARM_TABLE_BITREVIDX_FLT_256)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len256; + #endif + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_512) && defined(ARM_TABLE_BITREVIDX_FLT_512)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len512; + #endif + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_1024) && defined(ARM_TABLE_BITREVIDX_FLT_1024)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len1024; + #endif + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_2048) && defined(ARM_TABLE_BITREVIDX_FLT_2048)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len2048; + #endif + #if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || (defined(ARM_TABLE_TWIDDLECOEF_F16_4096) && defined(ARM_TABLE_BITREVIDX_FLT_4096)) + extern const arm_cfft_instance_f16 arm_cfft_sR_f16_len4096; + #endif +#endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_helium_utils.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_helium_utils.h new file mode 100644 index 000000000..ae9037cfe --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_helium_utils.h @@ -0,0 +1,753 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_helium_utils.h + * Description: Utility functions for Helium development + * + * @version V1.10.0 + * @date 08 July 2021 + * + * Target Processor: Cortex-M and Cortex-A cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_UTILS_HELIUM_H_ +#define _ARM_UTILS_HELIUM_H_ + + +#ifdef __cplusplus +extern "C" +{ +#endif +/*************************************** + +Definitions available for MVEF and MVEI + +***************************************/ +#if (defined (ARM_MATH_HELIUM) || defined(ARM_MATH_MVEF) || defined(ARM_MATH_MVEI)) && !defined(ARM_MATH_AUTOVECTORIZE) + +#define INACTIVELANE 0 /* inactive lane content */ + + +#endif /* defined (ARM_MATH_HELIUM) || defined(ARM_MATH_MVEF) || defined(ARM_MATH_MVEI) */ + +/*************************************** + +Definitions available for MVEF only + +***************************************/ +#if (defined (ARM_MATH_HELIUM) || defined(ARM_MATH_MVEF)) && !defined(ARM_MATH_AUTOVECTORIZE) + +__STATIC_FORCEINLINE float32_t vecAddAcrossF32Mve(float32x4_t in) +{ + float32_t acc; + + acc = vgetq_lane(in, 0) + vgetq_lane(in, 1) + + vgetq_lane(in, 2) + vgetq_lane(in, 3); + + return acc; +} + + + + +/* newton initial guess */ +#define INVSQRT_MAGIC_F32 0x5f3759df +#define INV_NEWTON_INIT_F32 0x7EF127EA + + +#define INVSQRT_NEWTON_MVE_F32(invSqrt, xHalf, xStart)\ +{ \ + float32x4_t tmp; \ + \ + /* tmp = xhalf * x * x */ \ + tmp = vmulq(xStart, xStart); \ + tmp = vmulq(tmp, xHalf); \ + /* (1.5f - xhalf * x * x) */ \ + tmp = vsubq(vdupq_n_f32(1.5f), tmp); \ + /* x = x*(1.5f-xhalf*x*x); */ \ + invSqrt = vmulq(tmp, xStart); \ +} +#endif /* defined (ARM_MATH_HELIUM) || defined(ARM_MATH_MVEF) */ + + +/*************************************** + +Definitions available for f16 datatype with HW acceleration only + +***************************************/ +#if defined(ARM_FLOAT16_SUPPORTED) +#if defined (ARM_MATH_MVE_FLOAT16) && !defined(ARM_MATH_AUTOVECTORIZE) + +__STATIC_FORCEINLINE float16_t vecAddAcrossF16Mve(float16x8_t in) +{ + float16x8_t tmpVec; + _Float16 acc; + + tmpVec = (float16x8_t) vrev32q_s16((int16x8_t) in); + in = vaddq_f16(tmpVec, in); + tmpVec = (float16x8_t) vrev64q_s32((int32x4_t) in); + in = vaddq_f16(tmpVec, in); + acc = (_Float16)vgetq_lane_f16(in, 0) + (_Float16)vgetq_lane_f16(in, 4); + + return acc; +} + +__STATIC_FORCEINLINE float16x8_t __mve_cmplx_sum_intra_vec_f16( + float16x8_t vecIn) +{ + float16x8_t vecTmp, vecOut; + uint32_t tmp; + + vecTmp = (float16x8_t) vrev64q_s32((int32x4_t) vecIn); + // TO TRACK : using canonical addition leads to unefficient code generation for f16 + // vecTmp = vecTmp + vecAccCpx0; + /* + * Compute + * re0+re1 | im0+im1 | re0+re1 | im0+im1 + * re2+re3 | im2+im3 | re2+re3 | im2+im3 + */ + vecTmp = vaddq_f16(vecTmp, vecIn); + vecOut = vecTmp; + /* + * shift left, random tmp insertion in bottom + */ + vecOut = vreinterpretq_f16_s32(vshlcq_s32(vreinterpretq_s32_f16(vecOut) , &tmp, 32)); + /* + * Compute: + * DONTCARE | DONTCARE | re0+re1+re0+re1 |im0+im1+im0+im1 + * re0+re1+re2+re3 | im0+im1+im2+im3 | re2+re3+re2+re3 |im2+im3+im2+im3 + */ + vecOut = vaddq_f16(vecOut, vecTmp); + /* + * Cmplx sum is in 4rd & 5th f16 elt + * return full vector + */ + return vecOut; +} + + +#define mve_cmplx_sum_intra_r_i_f16(vec, Re, Im) \ +{ \ + float16x8_t vecOut = __mve_cmplx_sum_intra_vec_f16(vec); \ + Re = vgetq_lane(vecOut, 4); \ + Im = vgetq_lane(vecOut, 5); \ +} + +__STATIC_FORCEINLINE void mve_cmplx_sum_intra_vec_f16( + float16x8_t vecIn, + float16_t *pOut) +{ + float16x8_t vecOut = __mve_cmplx_sum_intra_vec_f16(vecIn); + /* + * Cmplx sum is in 4rd & 5th f16 elt + * use 32-bit extraction + */ + *(float32_t *) pOut = ((float32x4_t) vecOut)[2]; +} + + +#define INVSQRT_MAGIC_F16 0x59ba /* ( 0x1ba = 0x3759df >> 13) */ + +/* canonical version of INVSQRT_NEWTON_MVE_F16 leads to bad performance */ +#define INVSQRT_NEWTON_MVE_F16(invSqrt, xHalf, xStart) \ +{ \ + float16x8_t tmp; \ + \ + /* tmp = xhalf * x * x */ \ + tmp = vmulq(xStart, xStart); \ + tmp = vmulq(tmp, xHalf); \ + /* (1.5f - xhalf * x * x) */ \ + tmp = vsubq(vdupq_n_f16((float16_t)1.5), tmp); \ + /* x = x*(1.5f-xhalf*x*x); */ \ + invSqrt = vmulq(tmp, xStart); \ +} + +#endif +#endif + +/*************************************** + +Definitions available for MVEI and MVEF only + +***************************************/ +#if (defined (ARM_MATH_HELIUM) || defined(ARM_MATH_MVEF) || defined(ARM_MATH_MVEI)) && !defined(ARM_MATH_AUTOVECTORIZE) +/* Following functions are used to transpose matrix in f32 and q31 cases */ +__STATIC_INLINE arm_status arm_mat_trans_32bit_2x2_mve( + uint32_t * pDataSrc, + uint32_t * pDataDest) +{ + static const uint32x4_t vecOffs = { 0, 2, 1, 3 }; + /* + * + * | 0 1 | => | 0 2 | + * | 2 3 | | 1 3 | + * + */ + uint32x4_t vecIn = vldrwq_u32((uint32_t const *)pDataSrc); + vstrwq_scatter_shifted_offset_u32(pDataDest, vecOffs, vecIn); + + return (ARM_MATH_SUCCESS); +} + +__STATIC_INLINE arm_status arm_mat_trans_32bit_3x3_mve( + uint32_t * pDataSrc, + uint32_t * pDataDest) +{ + const uint32x4_t vecOffs1 = { 0, 3, 6, 1}; + const uint32x4_t vecOffs2 = { 4, 7, 2, 5}; + /* + * + * | 0 1 2 | | 0 3 6 | 4 x 32 flattened version | 0 3 6 1 | + * | 3 4 5 | => | 1 4 7 | => | 4 7 2 5 | + * | 6 7 8 | | 2 5 8 | (row major) | 8 . . . | + * + */ + uint32x4_t vecIn1 = vldrwq_u32((uint32_t const *) pDataSrc); + uint32x4_t vecIn2 = vldrwq_u32((uint32_t const *) &pDataSrc[4]); + + vstrwq_scatter_shifted_offset_u32(pDataDest, vecOffs1, vecIn1); + vstrwq_scatter_shifted_offset_u32(pDataDest, vecOffs2, vecIn2); + + pDataDest[8] = pDataSrc[8]; + + return (ARM_MATH_SUCCESS); +} + +__STATIC_INLINE arm_status arm_mat_trans_32bit_4x4_mve(uint32_t * pDataSrc, uint32_t * pDataDest) +{ + /* + * 4x4 Matrix transposition + * is 4 x de-interleave operation + * + * 0 1 2 3 0 4 8 12 + * 4 5 6 7 1 5 9 13 + * 8 9 10 11 2 6 10 14 + * 12 13 14 15 3 7 11 15 + */ + + uint32x4x4_t vecIn; + + vecIn = vld4q((uint32_t const *) pDataSrc); + vstrwq(pDataDest, vecIn.val[0]); + pDataDest += 4; + vstrwq(pDataDest, vecIn.val[1]); + pDataDest += 4; + vstrwq(pDataDest, vecIn.val[2]); + pDataDest += 4; + vstrwq(pDataDest, vecIn.val[3]); + + return (ARM_MATH_SUCCESS); +} + + +__STATIC_INLINE arm_status arm_mat_trans_32bit_generic_mve( + uint16_t srcRows, + uint16_t srcCols, + uint32_t * pDataSrc, + uint32_t * pDataDest) +{ + uint32x4_t vecOffs; + uint32_t i; + uint32_t blkCnt; + uint32_t const *pDataC; + uint32_t *pDataDestR; + uint32x4_t vecIn; + + vecOffs = vidupq_u32((uint32_t)0, 1); + vecOffs = vecOffs * srcCols; + + i = srcCols; + do + { + pDataC = (uint32_t const *) pDataSrc; + pDataDestR = pDataDest; + + blkCnt = srcRows >> 2; + while (blkCnt > 0U) + { + vecIn = vldrwq_gather_shifted_offset_u32(pDataC, vecOffs); + vstrwq(pDataDestR, vecIn); + pDataDestR += 4; + pDataC = pDataC + srcCols * 4; + /* + * Decrement the blockSize loop counter + */ + blkCnt--; + } + + /* + * tail + */ + blkCnt = srcRows & 3; + if (blkCnt > 0U) + { + mve_pred16_t p0 = vctp32q(blkCnt); + vecIn = vldrwq_gather_shifted_offset_u32(pDataC, vecOffs); + vstrwq_p(pDataDestR, vecIn, p0); + } + + pDataSrc += 1; + pDataDest += srcRows; + } + while (--i); + + return (ARM_MATH_SUCCESS); +} + +__STATIC_INLINE arm_status arm_mat_cmplx_trans_32bit( + uint16_t srcRows, + uint16_t srcCols, + uint32_t *pDataSrc, + uint16_t dstRows, + uint16_t dstCols, + uint32_t *pDataDest) +{ + uint32_t i; + uint32_t const *pDataC; + uint32_t *pDataRow; + uint32_t *pDataDestR, *pDataDestRow; + uint32x4_t vecOffsRef, vecOffsCur; + uint32_t blkCnt; + uint32x4_t vecIn; + +#ifdef ARM_MATH_MATRIX_CHECK + /* + * Check for matrix mismatch condition + */ + if ((srcRows != dstCols) || (srcCols != dstRows)) + { + /* + * Set status as ARM_MATH_SIZE_MISMATCH + */ + return ARM_MATH_SIZE_MISMATCH; + } +#else + (void)dstRows; + (void)dstCols; +#endif + + /* 2x2, 3x3 and 4x4 specialization to be added */ + + vecOffsRef[0] = 0; + vecOffsRef[1] = 1; + vecOffsRef[2] = srcCols << 1; + vecOffsRef[3] = (srcCols << 1) + 1; + + pDataRow = pDataSrc; + pDataDestRow = pDataDest; + i = srcCols; + do + { + pDataC = (uint32_t const *) pDataRow; + pDataDestR = pDataDestRow; + vecOffsCur = vecOffsRef; + + blkCnt = (srcRows * CMPLX_DIM) >> 2; + while (blkCnt > 0U) + { + vecIn = vldrwq_gather_shifted_offset(pDataC, vecOffsCur); + vstrwq(pDataDestR, vecIn); + pDataDestR += 4; + vecOffsCur = vaddq(vecOffsCur, (srcCols << 2)); + /* + * Decrement the blockSize loop counter + */ + blkCnt--; + } + /* + * tail + * (will be merged thru tail predication) + */ + blkCnt = (srcRows * CMPLX_DIM) & 3; + if (blkCnt > 0U) + { + mve_pred16_t p0 = vctp32q(blkCnt); + vecIn = vldrwq_gather_shifted_offset(pDataC, vecOffsCur); + vstrwq_p(pDataDestR, vecIn, p0); + } + + pDataRow += CMPLX_DIM; + pDataDestRow += (srcRows * CMPLX_DIM); + } + while (--i); + + return (ARM_MATH_SUCCESS); +} + +__STATIC_INLINE arm_status arm_mat_trans_16bit_2x2(uint16_t * pDataSrc, uint16_t * pDataDest) +{ + pDataDest[0] = pDataSrc[0]; + pDataDest[3] = pDataSrc[3]; + pDataDest[2] = pDataSrc[1]; + pDataDest[1] = pDataSrc[2]; + + return (ARM_MATH_SUCCESS); +} + +__STATIC_INLINE arm_status arm_mat_trans_16bit_3x3_mve(uint16_t * pDataSrc, uint16_t * pDataDest) +{ + static const uint16_t stridesTr33[8] = { 0, 3, 6, 1, 4, 7, 2, 5 }; + uint16x8_t vecOffs1; + uint16x8_t vecIn1; + /* + * + * | 0 1 2 | | 0 3 6 | 8 x 16 flattened version | 0 3 6 1 4 7 2 5 | + * | 3 4 5 | => | 1 4 7 | => | 8 . . . . . . . | + * | 6 7 8 | | 2 5 8 | (row major) + * + */ + vecOffs1 = vldrhq_u16((uint16_t const *) stridesTr33); + vecIn1 = vldrhq_u16((uint16_t const *) pDataSrc); + + vstrhq_scatter_shifted_offset_u16(pDataDest, vecOffs1, vecIn1); + + pDataDest[8] = pDataSrc[8]; + + return (ARM_MATH_SUCCESS); +} + + +__STATIC_INLINE arm_status arm_mat_trans_16bit_4x4_mve(uint16_t * pDataSrc, uint16_t * pDataDest) +{ + static const uint16_t stridesTr44_1[8] = { 0, 4, 8, 12, 1, 5, 9, 13 }; + static const uint16_t stridesTr44_2[8] = { 2, 6, 10, 14, 3, 7, 11, 15 }; + uint16x8_t vecOffs1, vecOffs2; + uint16x8_t vecIn1, vecIn2; + uint16_t const * pDataSrcVec = (uint16_t const *) pDataSrc; + + /* + * 4x4 Matrix transposition + * + * | 0 1 2 3 | | 0 4 8 12 | 8 x 16 flattened version + * | 4 5 6 7 | => | 1 5 9 13 | => [0 4 8 12 1 5 9 13] + * | 8 9 10 11 | | 2 6 10 14 | [2 6 10 14 3 7 11 15] + * | 12 13 14 15 | | 3 7 11 15 | + */ + + vecOffs1 = vldrhq_u16((uint16_t const *) stridesTr44_1); + vecOffs2 = vldrhq_u16((uint16_t const *) stridesTr44_2); + vecIn1 = vldrhq_u16(pDataSrcVec); + pDataSrcVec += 8; + vecIn2 = vldrhq_u16(pDataSrcVec); + + vstrhq_scatter_shifted_offset_u16(pDataDest, vecOffs1, vecIn1); + vstrhq_scatter_shifted_offset_u16(pDataDest, vecOffs2, vecIn2); + + + return (ARM_MATH_SUCCESS); +} + + + +__STATIC_INLINE arm_status arm_mat_trans_16bit_generic( + uint16_t srcRows, + uint16_t srcCols, + uint16_t * pDataSrc, + uint16_t * pDataDest) +{ + uint16x8_t vecOffs; + uint32_t i; + uint32_t blkCnt; + uint16_t const *pDataC; + uint16_t *pDataDestR; + uint16x8_t vecIn; + + vecOffs = vidupq_u16((uint32_t)0, 1); + vecOffs = vecOffs * srcCols; + + i = srcCols; + while(i > 0U) + { + pDataC = (uint16_t const *) pDataSrc; + pDataDestR = pDataDest; + + blkCnt = srcRows >> 3; + while (blkCnt > 0U) + { + vecIn = vldrhq_gather_shifted_offset_u16(pDataC, vecOffs); + vstrhq_u16(pDataDestR, vecIn); + pDataDestR += 8; + pDataC = pDataC + srcCols * 8; + /* + * Decrement the blockSize loop counter + */ + blkCnt--; + } + + /* + * tail + */ + blkCnt = srcRows & 7; + if (blkCnt > 0U) + { + mve_pred16_t p0 = vctp16q(blkCnt); + vecIn = vldrhq_gather_shifted_offset_u16(pDataC, vecOffs); + vstrhq_p_u16(pDataDestR, vecIn, p0); + } + pDataSrc += 1; + pDataDest += srcRows; + i--; + } + + return (ARM_MATH_SUCCESS); +} + + +__STATIC_INLINE arm_status arm_mat_cmplx_trans_16bit( + uint16_t srcRows, + uint16_t srcCols, + uint16_t *pDataSrc, + uint16_t dstRows, + uint16_t dstCols, + uint16_t *pDataDest) +{ + static const uint16_t loadCmplxCol[8] = { 0, 0, 1, 1, 2, 2, 3, 3 }; + int i; + uint16x8_t vecOffsRef, vecOffsCur; + uint16_t const *pDataC; + uint16_t *pDataRow; + uint16_t *pDataDestR, *pDataDestRow; + uint32_t blkCnt; + uint16x8_t vecIn; + +#ifdef ARM_MATH_MATRIX_CHECK + /* + * Check for matrix mismatch condition + */ + if ((srcRows != dstCols) || (srcCols != dstRows)) + { + /* + * Set status as ARM_MATH_SIZE_MISMATCH + */ + return ARM_MATH_SIZE_MISMATCH; + } +#else + (void)dstRows; + (void)dstCols; +#endif + + /* + * 2x2, 3x3 and 4x4 specialization to be added + */ + + + /* + * build [0, 1, 2xcol, 2xcol+1, 4xcol, 4xcol+1, 6xcol, 6xcol+1] + */ + vecOffsRef = vldrhq_u16((uint16_t const *) loadCmplxCol); + vecOffsRef = vmulq(vecOffsRef, (uint16_t) (srcCols * CMPLX_DIM)) + + viwdupq_u16((uint32_t)0, (uint16_t) 2, 1); + + pDataRow = pDataSrc; + pDataDestRow = pDataDest; + i = srcCols; + do + { + pDataC = (uint16_t const *) pDataRow; + pDataDestR = pDataDestRow; + vecOffsCur = vecOffsRef; + + blkCnt = (srcRows * CMPLX_DIM) >> 3; + while (blkCnt > 0U) + { + vecIn = vldrhq_gather_shifted_offset(pDataC, vecOffsCur); + vstrhq(pDataDestR, vecIn); + pDataDestR+= 8; // VEC_LANES_U16 + vecOffsCur = vaddq(vecOffsCur, (srcCols << 3)); + /* + * Decrement the blockSize loop counter + */ + blkCnt--; + } + /* + * tail + * (will be merged thru tail predication) + */ + blkCnt = (srcRows * CMPLX_DIM) & 0x7; + if (blkCnt > 0U) + { + mve_pred16_t p0 = vctp16q(blkCnt); + vecIn = vldrhq_gather_shifted_offset(pDataC, vecOffsCur); + vstrhq_p(pDataDestR, vecIn, p0); + } + + pDataRow += CMPLX_DIM; + pDataDestRow += (srcRows * CMPLX_DIM); + } + while (--i); + + return (ARM_MATH_SUCCESS); +} +#endif /* MVEF and MVEI */ + +/*************************************** + +Definitions available for MVEI only + +***************************************/ +#if (defined (ARM_MATH_HELIUM) || defined(ARM_MATH_MVEI)) && !defined(ARM_MATH_AUTOVECTORIZE) + +#include "arm_common_tables.h" + +#define MVE_ASRL_SAT16(acc, shift) ((sqrshrl_sat48(acc, -(32-shift)) >> 32) & 0xffffffff) +#define MVE_ASRL_SAT32(acc, shift) ((sqrshrl(acc, -(32-shift)) >> 32) & 0xffffffff) + + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_FAST_SQRT_Q31_MVE) +__STATIC_INLINE q31x4_t FAST_VSQRT_Q31(q31x4_t vecIn) +{ + q63x2_t vecTmpLL; + q31x4_t vecTmp0, vecTmp1; + q31_t scale; + q63_t tmp64; + q31x4_t vecNrm, vecDst, vecIdx, vecSignBits; + + + vecSignBits = vclsq(vecIn); + vecSignBits = vbicq_n_s32(vecSignBits, 1); + /* + * in = in << no_of_sign_bits; + */ + vecNrm = vshlq(vecIn, vecSignBits); + /* + * index = in >> 24; + */ + vecIdx = vecNrm >> 24; + vecIdx = vecIdx << 1; + + vecTmp0 = vldrwq_gather_shifted_offset_s32(sqrtTable_Q31, (uint32x4_t)vecIdx); + + vecIdx = vecIdx + 1; + + vecTmp1 = vldrwq_gather_shifted_offset_s32(sqrtTable_Q31, (uint32x4_t)vecIdx); + + vecTmp1 = vqrdmulhq(vecTmp1, vecNrm); + vecTmp0 = vecTmp0 - vecTmp1; + vecTmp1 = vqrdmulhq(vecTmp0, vecTmp0); + vecTmp1 = vqrdmulhq(vecNrm, vecTmp1); + vecTmp1 = vdupq_n_s32(0x18000000) - vecTmp1; + vecTmp0 = vqrdmulhq(vecTmp0, vecTmp1); + vecTmpLL = vmullbq_int(vecNrm, vecTmp0); + + /* + * scale elements 0, 2 + */ + scale = 26 + (vecSignBits[0] >> 1); + tmp64 = asrl(vecTmpLL[0], scale); + vecDst[0] = (q31_t) tmp64; + + scale = 26 + (vecSignBits[2] >> 1); + tmp64 = asrl(vecTmpLL[1], scale); + vecDst[2] = (q31_t) tmp64; + + vecTmpLL = vmulltq_int(vecNrm, vecTmp0); + + /* + * scale elements 1, 3 + */ + scale = 26 + (vecSignBits[1] >> 1); + tmp64 = asrl(vecTmpLL[0], scale); + vecDst[1] = (q31_t) tmp64; + + scale = 26 + (vecSignBits[3] >> 1); + tmp64 = asrl(vecTmpLL[1], scale); + vecDst[3] = (q31_t) tmp64; + /* + * set negative values to 0 + */ + vecDst = vdupq_m(vecDst, 0, vcmpltq_n_s32(vecIn, 0)); + + return vecDst; +} +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FAST_TABLES) || defined(ARM_TABLE_FAST_SQRT_Q15_MVE) +__STATIC_INLINE q15x8_t FAST_VSQRT_Q15(q15x8_t vecIn) +{ + q31x4_t vecTmpLev, vecTmpLodd, vecSignL; + q15x8_t vecTmp0, vecTmp1; + q15x8_t vecNrm, vecDst, vecIdx, vecSignBits; + + vecDst = vuninitializedq_s16(); + + vecSignBits = vclsq(vecIn); + vecSignBits = vbicq_n_s16(vecSignBits, 1); + /* + * in = in << no_of_sign_bits; + */ + vecNrm = vshlq(vecIn, vecSignBits); + + vecIdx = vecNrm >> 8; + vecIdx = vecIdx << 1; + + vecTmp0 = vldrhq_gather_shifted_offset_s16(sqrtTable_Q15, (uint16x8_t)vecIdx); + + vecIdx = vecIdx + 1; + + vecTmp1 = vldrhq_gather_shifted_offset_s16(sqrtTable_Q15, (uint16x8_t)vecIdx); + + vecTmp1 = vqrdmulhq(vecTmp1, vecNrm); + vecTmp0 = vecTmp0 - vecTmp1; + vecTmp1 = vqrdmulhq(vecTmp0, vecTmp0); + vecTmp1 = vqrdmulhq(vecNrm, vecTmp1); + vecTmp1 = vdupq_n_s16(0x1800) - vecTmp1; + vecTmp0 = vqrdmulhq(vecTmp0, vecTmp1); + + vecSignBits = vecSignBits >> 1; + + vecTmpLev = vmullbq_int(vecNrm, vecTmp0); + vecTmpLodd = vmulltq_int(vecNrm, vecTmp0); + + vecTmp0 = vecSignBits + 10; + /* + * negate sign to apply register based vshl + */ + vecTmp0 = -vecTmp0; + + /* + * shift even elements + */ + vecSignL = vmovlbq(vecTmp0); + vecTmpLev = vshlq(vecTmpLev, vecSignL); + /* + * shift odd elements + */ + vecSignL = vmovltq(vecTmp0); + vecTmpLodd = vshlq(vecTmpLodd, vecSignL); + /* + * merge and narrow odd and even parts + */ + vecDst = vmovnbq_s32(vecDst, vecTmpLev); + vecDst = vmovntq_s32(vecDst, vecTmpLodd); + /* + * set negative values to 0 + */ + vecDst = vdupq_m(vecDst, 0, vcmpltq_n_s16(vecIn, 0)); + + return vecDst; +} +#endif + +#endif /* defined (ARM_MATH_HELIUM) || defined(ARM_MATH_MVEI) */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_math.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_math.h new file mode 100644 index 000000000..300c5cf4a --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_math.h @@ -0,0 +1,236 @@ +/****************************************************************************** + * @file arm_math.h + * @brief Public header file for CMSIS DSP Library + * @version V1.10.0 + * @date 08 July 2021 + * Target Processor: Cortex-M and Cortex-A cores + ******************************************************************************/ +/* + * Copyright (c) 2010-2021 Arm Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/** + \mainpage CMSIS DSP Software Library + * + * \section intro Introduction + * + * This user manual describes the CMSIS DSP software library, + * a suite of common signal processing functions for use on Cortex-M and Cortex-A processor + * based devices. + * + * The library is divided into a number of functions each covering a specific category: + * - Basic math functions + * - Fast math functions + * - Complex math functions + * - Filtering functions + * - Matrix functions + * - Transform functions + * - Motor control functions + * - Statistical functions + * - Support functions + * - Interpolation functions + * - Support Vector Machine functions (SVM) + * - Bayes classifier functions + * - Distance functions + * - Quaternion functions + * + * The library has generally separate functions for operating on 8-bit integers, 16-bit integers, + * 32-bit integer and 32-bit floating-point values. + * + * The library is providing vectorized versions of most algorthms for Helium + * and of most f32 algorithms for Neon. + * + * When using a vectorized version, provide a little bit of padding after the end of + * a buffer (3 words) because the vectorized code may read a little bit after the end + * of a buffer. You don't have to modify your buffers but just ensure that the + * end of buffer + padding is not outside of a memory region. + * + * \section using Using the Library + * + * The library is released in source form. It is strongly advised to compile the library using -Ofast to + * have the best performances. + * + * The library functions are declared in the public file arm_math.h which is placed in the Include folder. + * Simply include this file. If you don't want to include everything, you can also rely + * on headers in Include/dsp folder and use only what you need. + * + * \section example Examples + * + * The library ships with a number of examples which demonstrate how to use the library functions. + * + * \section toolchain Toolchain Support + * + * The library is now tested on Fast Models building with cmake. + * Core M0, M4, M7, M33, M55, A32 are tested. + * + * + * \section preprocessor Preprocessor Macros + * + * Each library project have different preprocessor macros. + * + * - ARM_MATH_BIG_ENDIAN: + * + * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets. + * + * - ARM_MATH_MATRIX_CHECK: + * + * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices + * + * - ARM_MATH_ROUNDING: + * + * Define macro ARM_MATH_ROUNDING for rounding on support functions + * + * - ARM_MATH_LOOPUNROLL: + * + * Define macro ARM_MATH_LOOPUNROLL to enable manual loop unrolling in DSP functions + * + * - ARM_MATH_NEON: + * + * Define macro ARM_MATH_NEON to enable Neon versions of the DSP functions. + * It is not enabled by default when Neon is available because performances are + * dependent on the compiler and target architecture. + * + * - ARM_MATH_NEON_EXPERIMENTAL: + * + * Define macro ARM_MATH_NEON_EXPERIMENTAL to enable experimental Neon versions of + * of some DSP functions. Experimental Neon versions currently do not have better + * performances than the scalar versions. + * + * - ARM_MATH_HELIUM: + * + * It implies the flags ARM_MATH_MVEF and ARM_MATH_MVEI and ARM_MATH_MVE_FLOAT16. + * + * - ARM_MATH_HELIUM_EXPERIMENTAL: + * + * Only taken into account when ARM_MATH_MVEF, ARM_MATH_MVEI or ARM_MATH_MVE_FLOAT16 are defined. + * Enable some vector versions which may have worse performance than scalar + * depending on the core / compiler configuration. + * + * - ARM_MATH_MVEF: + * + * Select Helium versions of the f32 algorithms. + * It implies ARM_MATH_FLOAT16 and ARM_MATH_MVEI. + * + * - ARM_MATH_MVEI: + * + * Select Helium versions of the int and fixed point algorithms. + * + * - ARM_MATH_MVE_FLOAT16: + * + * MVE Float16 implementations of some algorithms (Requires MVE extension). + * + * - DISABLEFLOAT16: + * + * Disable float16 algorithms when __fp16 is not supported for a + * specific compiler / core configuration. + * This is only valid for scalar. When vector architecture is + * supporting f16 then it can't be disabled. + * + * - ARM_MATH_AUTOVECTORIZE: + * + * With Helium or Neon, disable the use of vectorized code with C intrinsics + * and use pure C instead. The vectorization is then done by the compiler. + * + *
+ * \section pack CMSIS-DSP in ARM::CMSIS Pack + * + * The following files relevant to CMSIS-DSP are present in the ARM::CMSIS Pack directories: + * |File/Folder |Content | + * |---------------------------------|------------------------------------------------------------------------| + * |\b CMSIS\\Documentation\\DSP | This documentation | + * |\b CMSIS\\DSP\\Examples | Example projects demonstrating the usage of the library functions | + * |\b CMSIS\\DSP\\Include | DSP_Lib include files for using and building the lib + * |\b CMSIS\\DSP\\PrivateInclude | DSP_Lib private include files for building the lib | + * |\b CMSIS\\DSP\\Lib | DSP_Lib binaries | + * |\b CMSIS\\DSP\\Source | DSP_Lib source files | + * + *
+ * \section rev Revision History of CMSIS-DSP + * Please refer to \ref ChangeLog_pg. + */ + + + + + + + + + + + +/** + * @defgroup groupExamples Examples + */ + + + + + +#ifndef _ARM_MATH_H +#define _ARM_MATH_H + + +#include "arm_math_types.h" +#include "arm_math_memory.h" + +#include "dsp/none.h" +#include "dsp/utils.h" + +#include "dsp/basic_math_functions.h" +#include "dsp/interpolation_functions.h" +#include "dsp/bayes_functions.h" +#include "dsp/matrix_functions.h" +#include "dsp/complex_math_functions.h" +#include "dsp/statistics_functions.h" +#include "dsp/controller_functions.h" +#include "dsp/support_functions.h" +#include "dsp/distance_functions.h" +#include "dsp/svm_functions.h" +#include "dsp/fast_math_functions.h" +#include "dsp/transform_functions.h" +#include "dsp/filtering_functions.h" +#include "dsp/quaternion_math_functions.h" + + + +#ifdef __cplusplus +extern "C" +{ +#endif + + + + +//#define TABLE_SPACING_Q31 0x400000 +//#define TABLE_SPACING_Q15 0x80 + + + + + +#ifdef __cplusplus +} +#endif + + +#endif /* _ARM_MATH_H */ + +/** + * + * End of file. + */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_math_f16.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_math_f16.h new file mode 100644 index 000000000..daf0c53d4 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_math_f16.h @@ -0,0 +1,59 @@ +/****************************************************************************** + * @file arm_math_f16.h + * @brief Public header file for f16 function of the CMSIS DSP Library + * @version V1.10.0 + * @date 08 July 2021 + * Target Processor: Cortex-M and Cortex-A cores + ******************************************************************************/ +/* + * Copyright (c) 2010-2021 Arm Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_MATH_F16_H +#define _ARM_MATH_F16_H + +#include "arm_math.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +#include "arm_math_types_f16.h" +#include "dsp/none.h" +#include "dsp/utils.h" +#include "dsp/basic_math_functions_f16.h" +#include "dsp/interpolation_functions_f16.h" +#include "dsp/bayes_functions_f16.h" +#include "dsp/matrix_functions_f16.h" +#include "dsp/complex_math_functions_f16.h" +#include "dsp/statistics_functions_f16.h" +#include "dsp/controller_functions_f16.h" +#include "dsp/support_functions_f16.h" +#include "dsp/distance_functions_f16.h" +#include "dsp/svm_functions_f16.h" +#include "dsp/fast_math_functions_f16.h" +#include "dsp/transform_functions_f16.h" +#include "dsp/filtering_functions_f16.h" + +#ifdef __cplusplus +} +#endif + +#endif /* _ARM_MATH_F16_H */ + + diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_math_memory.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_math_memory.h new file mode 100644 index 000000000..7bd83dc27 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_math_memory.h @@ -0,0 +1,206 @@ +/****************************************************************************** + * @file arm_math_memory.h + * @brief Public header file for CMSIS DSP Library + * @version V1.10.0 + * @date 08 July 2021 + * Target Processor: Cortex-M and Cortex-A cores + ******************************************************************************/ +/* + * Copyright (c) 2010-2021 Arm Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_MATH_MEMORY_H_ + +#define _ARM_MATH_MEMORY_H_ + +#include "arm_math_types.h" + + +#ifdef __cplusplus +extern "C" +{ +#endif + +/** + @brief definition to read/write two 16 bit values. + @deprecated + */ +#if defined ( __CC_ARM ) + #define __SIMD32_TYPE int32_t __packed +#elif defined ( __ARMCC_VERSION ) && ( __ARMCC_VERSION >= 6010050 ) + #define __SIMD32_TYPE int32_t +#elif defined ( __GNUC__ ) + #define __SIMD32_TYPE int32_t +#elif defined ( __ICCARM__ ) + #define __SIMD32_TYPE int32_t __packed +#elif defined ( __TI_ARM__ ) + #define __SIMD32_TYPE int32_t +#elif defined ( __CSMC__ ) + #define __SIMD32_TYPE int32_t +#elif defined ( __TASKING__ ) + #define __SIMD32_TYPE __un(aligned) int32_t +#elif defined(_MSC_VER ) + #define __SIMD32_TYPE int32_t +#else + #error Unknown compiler +#endif + +#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr)) +#define __SIMD32_CONST(addr) ( (__SIMD32_TYPE * ) (addr)) +#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE * ) (addr)) +#define __SIMD64(addr) (*( int64_t **) & (addr)) + + +/* SIMD replacement */ + + +/** + @brief Read 2 Q15 from Q15 pointer. + @param[in] pQ15 points to input value + @return Q31 value + */ +__STATIC_FORCEINLINE q31_t read_q15x2 ( + q15_t const * pQ15) +{ + q31_t val; + +#ifdef __ARM_FEATURE_UNALIGNED + memcpy (&val, pQ15, 4); +#else + val = (pQ15[1] << 16) | (pQ15[0] & 0x0FFFF) ; +#endif + + return (val); +} + +/** + @brief Read 2 Q15 from Q15 pointer and increment pointer afterwards. + @param[in] pQ15 points to input value + @return Q31 value + */ +#define read_q15x2_ia(pQ15) read_q15x2((*(pQ15) += 2) - 2) + +/** + @brief Read 2 Q15 from Q15 pointer and decrement pointer afterwards. + @param[in] pQ15 points to input value + @return Q31 value + */ +#define read_q15x2_da(pQ15) read_q15x2((*(pQ15) -= 2) + 2) + +/** + @brief Write 2 Q15 to Q15 pointer and increment pointer afterwards. + @param[in] pQ15 points to input value + @param[in] value Q31 value + @return none + */ +__STATIC_FORCEINLINE void write_q15x2_ia ( + q15_t ** pQ15, + q31_t value) +{ + q31_t val = value; +#ifdef __ARM_FEATURE_UNALIGNED + memcpy (*pQ15, &val, 4); +#else + (*pQ15)[0] = (q15_t)(val & 0x0FFFF); + (*pQ15)[1] = (q15_t)((val >> 16) & 0x0FFFF); +#endif + + *pQ15 += 2; +} + +/** + @brief Write 2 Q15 to Q15 pointer. + @param[in] pQ15 points to input value + @param[in] value Q31 value + @return none + */ +__STATIC_FORCEINLINE void write_q15x2 ( + q15_t * pQ15, + q31_t value) +{ + q31_t val = value; + +#ifdef __ARM_FEATURE_UNALIGNED + memcpy (pQ15, &val, 4); +#else + pQ15[0] = (q15_t)(val & 0x0FFFF); + pQ15[1] = (q15_t)(val >> 16); +#endif +} + + +/** + @brief Read 4 Q7 from Q7 pointer + @param[in] pQ7 points to input value + @return Q31 value + */ +__STATIC_FORCEINLINE q31_t read_q7x4 ( + q7_t const * pQ7) +{ + q31_t val; + +#ifdef __ARM_FEATURE_UNALIGNED + memcpy (&val, pQ7, 4); +#else + val =((pQ7[3] & 0x0FF) << 24) | ((pQ7[2] & 0x0FF) << 16) | ((pQ7[1] & 0x0FF) << 8) | (pQ7[0] & 0x0FF); +#endif + return (val); +} + +/** + @brief Read 4 Q7 from Q7 pointer and increment pointer afterwards. + @param[in] pQ7 points to input value + @return Q31 value + */ +#define read_q7x4_ia(pQ7) read_q7x4((*(pQ7) += 4) - 4) + +/** + @brief Read 4 Q7 from Q7 pointer and decrement pointer afterwards. + @param[in] pQ7 points to input value + @return Q31 value + */ +#define read_q7x4_da(pQ7) read_q7x4((*(pQ7) -= 4) + 4) + +/** + @brief Write 4 Q7 to Q7 pointer and increment pointer afterwards. + @param[in] pQ7 points to input value + @param[in] value Q31 value + @return none + */ +__STATIC_FORCEINLINE void write_q7x4_ia ( + q7_t ** pQ7, + q31_t value) +{ + q31_t val = value; +#ifdef __ARM_FEATURE_UNALIGNED + memcpy (*pQ7, &val, 4); +#else + (*pQ7)[0] = (q7_t)(val & 0x0FF); + (*pQ7)[1] = (q7_t)((val >> 8) & 0x0FF); + (*pQ7)[2] = (q7_t)((val >> 16) & 0x0FF); + (*pQ7)[3] = (q7_t)((val >> 24) & 0x0FF); + +#endif + *pQ7 += 4; +} + + +#ifdef __cplusplus +} +#endif + +#endif /*ifndef _ARM_MATH_MEMORY_H_ */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_math_types.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_math_types.h new file mode 100644 index 000000000..c615e667e --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_math_types.h @@ -0,0 +1,616 @@ +/****************************************************************************** + * @file arm_math_types.h + * @brief Public header file for CMSIS DSP Library + * @version V1.10.0 + * @date 08 July 2021 + * Target Processor: Cortex-M and Cortex-A cores + ******************************************************************************/ +/* + * Copyright (c) 2010-2021 Arm Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_MATH_TYPES_H_ + +#define _ARM_MATH_TYPES_H_ + +#ifdef __cplusplus +extern "C" +{ +#endif + +/* Compiler specific diagnostic adjustment */ +#if defined ( __CC_ARM ) + +#elif defined ( __ARMCC_VERSION ) && ( __ARMCC_VERSION >= 6010050 ) + +#elif defined ( __APPLE_CC__ ) + #pragma GCC diagnostic ignored "-Wold-style-cast" + +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wsign-conversion" + #pragma GCC diagnostic ignored "-Wconversion" + #pragma GCC diagnostic ignored "-Wunused-parameter" + +#elif defined ( __ICCARM__ ) + +#elif defined ( __TI_ARM__ ) + +#elif defined ( __CSMC__ ) + +#elif defined ( __TASKING__ ) + +#elif defined ( _MSC_VER ) + +#else + #error Unknown compiler +#endif + + +/* Included for instrinsics definitions */ +#if defined (_MSC_VER ) +#include +#define __STATIC_FORCEINLINE static __forceinline +#define __STATIC_INLINE static __inline +#define __ALIGNED(x) __declspec(align(x)) +#elif defined ( __APPLE_CC__ ) +#include +#define __ALIGNED(x) __attribute__((aligned(x))) +#define __STATIC_FORCEINLINE static inline __attribute__((always_inline)) +#define __STATIC_INLINE static inline +#elif defined (__GNUC_PYTHON__) +#include +#define __ALIGNED(x) __attribute__((aligned(x))) +#define __STATIC_FORCEINLINE static inline __attribute__((always_inline)) +#define __STATIC_INLINE static inline + +#else +#include "cmsis_compiler.h" +#endif + + + +#include +#include +#include +#include + +/* evaluate ARM DSP feature */ +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + #define ARM_MATH_DSP 1 +#endif + +#if defined(ARM_MATH_NEON) + #if defined(_MSC_VER) && defined(_M_ARM64EC) + #include + #else + #include + #endif + #if defined(__ARM_FEATURE_FP16_VECTOR_ARITHMETIC) && __ARM_FEATURE_FP16_VECTOR_ARITHMETIC + #if !defined(ARM_MATH_NEON_FLOAT16) + #define ARM_MATH_NEON_FLOAT16 + #endif + #endif +#endif + +#if !defined(ARM_MATH_AUTOVECTORIZE) + + +#if defined(__ARM_FEATURE_MVE) +#if __ARM_FEATURE_MVE + #if !defined(ARM_MATH_MVEI) + #define ARM_MATH_MVEI + #endif +#endif + +#if (__ARM_FEATURE_MVE & 2) + #if !defined(ARM_MATH_MVEF) + #define ARM_MATH_MVEF + #endif + #if !defined(ARM_MATH_MVE_FLOAT16) + #define ARM_MATH_MVE_FLOAT16 + #endif +#endif + +#endif /*defined(__ARM_FEATURE_MVE)*/ +#endif /*!defined(ARM_MATH_AUTOVECTORIZE)*/ + + +#if defined (ARM_MATH_HELIUM) + #if !defined(ARM_MATH_MVEF) + #define ARM_MATH_MVEF + #endif + + #if !defined(ARM_MATH_MVEI) + #define ARM_MATH_MVEI + #endif + + #if !defined(ARM_MATH_MVE_FLOAT16) + #define ARM_MATH_MVE_FLOAT16 + #endif +#endif + + + +#if defined ( __CC_ARM ) + /* Enter low optimization region - place directly above function definition */ + #if defined( __ARM_ARCH_7EM__ ) + #define LOW_OPTIMIZATION_ENTER \ + _Pragma ("push") \ + _Pragma ("O1") + #else + #define LOW_OPTIMIZATION_ENTER + #endif + + /* Exit low optimization region - place directly after end of function definition */ + #if defined ( __ARM_ARCH_7EM__ ) + #define LOW_OPTIMIZATION_EXIT \ + _Pragma ("pop") + #else + #define LOW_OPTIMIZATION_EXIT + #endif + + /* Enter low optimization region - place directly above function definition */ + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + + /* Exit low optimization region - place directly after end of function definition */ + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined (__ARMCC_VERSION ) && ( __ARMCC_VERSION >= 6010050 ) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined ( __APPLE_CC__ ) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined ( __GNUC__ ) + #define LOW_OPTIMIZATION_ENTER \ + __attribute__(( optimize("-O1") )) + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined ( __ICCARM__ ) + /* Enter low optimization region - place directly above function definition */ + #if defined ( __ARM_ARCH_7EM__ ) + #define LOW_OPTIMIZATION_ENTER \ + _Pragma ("optimize=low") + #else + #define LOW_OPTIMIZATION_ENTER + #endif + + /* Exit low optimization region - place directly after end of function definition */ + #define LOW_OPTIMIZATION_EXIT + + /* Enter low optimization region - place directly above function definition */ + #if defined ( __ARM_ARCH_7EM__ ) + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \ + _Pragma ("optimize=low") + #else + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #endif + + /* Exit low optimization region - place directly after end of function definition */ + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined ( __TI_ARM__ ) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined ( __CSMC__ ) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined ( __TASKING__ ) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT + +#elif defined ( _MSC_VER ) || defined(__GNUC_PYTHON__) + #define LOW_OPTIMIZATION_ENTER + #define LOW_OPTIMIZATION_EXIT + #define IAR_ONLY_LOW_OPTIMIZATION_ENTER + #define IAR_ONLY_LOW_OPTIMIZATION_EXIT +#endif + + + +/* Compiler specific diagnostic adjustment */ +#if defined ( __CC_ARM ) + +#elif defined ( __ARMCC_VERSION ) && ( __ARMCC_VERSION >= 6010050 ) + +#elif defined ( __APPLE_CC__ ) + +#elif defined ( __GNUC__ ) +#pragma GCC diagnostic pop + +#elif defined ( __ICCARM__ ) + +#elif defined ( __TI_ARM__ ) + +#elif defined ( __CSMC__ ) + +#elif defined ( __TASKING__ ) + +#elif defined ( _MSC_VER ) + +#else + #error Unknown compiler +#endif + +#ifdef __cplusplus +} +#endif + +#if defined(__ARM_FEATURE_MVE) && __ARM_FEATURE_MVE +#include +#endif + +#ifdef __cplusplus +extern "C" +{ +#endif + + /** + * @brief 8-bit fractional data type in 1.7 format. + */ + typedef int8_t q7_t; + + /** + * @brief 16-bit fractional data type in 1.15 format. + */ + typedef int16_t q15_t; + + /** + * @brief 32-bit fractional data type in 1.31 format. + */ + typedef int32_t q31_t; + + /** + * @brief 64-bit fractional data type in 1.63 format. + */ + typedef int64_t q63_t; + + /** + * @brief 32-bit floating-point type definition. + */ +#if !defined(__ICCARM__) || !(__ARM_FEATURE_MVE & 2) + typedef float float32_t; +#endif + + /** + * @brief 64-bit floating-point type definition. + */ + typedef double float64_t; + + /** + * @brief vector types + */ +#if defined(ARM_MATH_NEON) || (defined (ARM_MATH_MVEI) && !defined(ARM_MATH_AUTOVECTORIZE)) + /** + * @brief 64-bit fractional 128-bit vector data type in 1.63 format + */ + typedef int64x2_t q63x2_t; + + /** + * @brief 32-bit fractional 128-bit vector data type in 1.31 format. + */ + typedef int32x4_t q31x4_t; + + /** + * @brief 16-bit fractional 128-bit vector data type with 16-bit alignment in 1.15 format. + */ + typedef __ALIGNED(2) int16x8_t q15x8_t; + + /** + * @brief 8-bit fractional 128-bit vector data type with 8-bit alignment in 1.7 format. + */ + typedef __ALIGNED(1) int8x16_t q7x16_t; + + /** + * @brief 32-bit fractional 128-bit vector pair data type in 1.31 format. + */ + typedef int32x4x2_t q31x4x2_t; + + /** + * @brief 32-bit fractional 128-bit vector quadruplet data type in 1.31 format. + */ + typedef int32x4x4_t q31x4x4_t; + + /** + * @brief 16-bit fractional 128-bit vector pair data type in 1.15 format. + */ + typedef int16x8x2_t q15x8x2_t; + + /** + * @brief 16-bit fractional 128-bit vector quadruplet data type in 1.15 format. + */ + typedef int16x8x4_t q15x8x4_t; + + /** + * @brief 8-bit fractional 128-bit vector pair data type in 1.7 format. + */ + typedef int8x16x2_t q7x16x2_t; + + /** + * @brief 8-bit fractional 128-bit vector quadruplet data type in 1.7 format. + */ + typedef int8x16x4_t q7x16x4_t; + + /** + * @brief 32-bit fractional data type in 9.23 format. + */ + typedef int32_t q23_t; + + /** + * @brief 32-bit fractional 128-bit vector data type in 9.23 format. + */ + typedef int32x4_t q23x4_t; + + /** + * @brief 64-bit status 128-bit vector data type. + */ + typedef int64x2_t status64x2_t; + + /** + * @brief 32-bit status 128-bit vector data type. + */ + typedef int32x4_t status32x4_t; + + /** + * @brief 16-bit status 128-bit vector data type. + */ + typedef int16x8_t status16x8_t; + + /** + * @brief 8-bit status 128-bit vector data type. + */ + typedef int8x16_t status8x16_t; + + +#endif + +#if defined(ARM_MATH_NEON) || (defined(ARM_MATH_MVEF) && !defined(ARM_MATH_AUTOVECTORIZE)) /* floating point vector*/ + /** + * @brief 32-bit floating-point 128-bit vector type + */ + typedef float32x4_t f32x4_t; + + /** + * @brief 32-bit floating-point 128-bit vector pair data type + */ + typedef float32x4x2_t f32x4x2_t; + + /** + * @brief 32-bit floating-point 128-bit vector quadruplet data type + */ + typedef float32x4x4_t f32x4x4_t; + + /** + * @brief 32-bit ubiquitous 128-bit vector data type + */ + typedef union _any32x4_t + { + float32x4_t f; + int32x4_t i; + } any32x4_t; + +#endif + +#if defined(ARM_MATH_NEON) + /** + * @brief 32-bit fractional 64-bit vector data type in 1.31 format. + */ + typedef int32x2_t q31x2_t; + + /** + * @brief 16-bit fractional 64-bit vector data type in 1.15 format. + */ + typedef __ALIGNED(2) int16x4_t q15x4_t; + + /** + * @brief 8-bit fractional 64-bit vector data type in 1.7 format. + */ + typedef __ALIGNED(1) int8x8_t q7x8_t; + + /** + * @brief 32-bit float 64-bit vector data type. + */ + typedef float32x2_t f32x2_t; + + /** + * @brief 32-bit floating-point 128-bit vector triplet data type + */ + typedef float32x4x3_t f32x4x3_t; + + + /** + * @brief 32-bit fractional 128-bit vector triplet data type in 1.31 format + */ + typedef int32x4x3_t q31x4x3_t; + + /** + * @brief 16-bit fractional 128-bit vector triplet data type in 1.15 format + */ + typedef int16x8x3_t q15x8x3_t; + + /** + * @brief 8-bit fractional 128-bit vector triplet data type in 1.7 format + */ + typedef int8x16x3_t q7x16x3_t; + + /** + * @brief 32-bit floating-point 64-bit vector pair data type + */ + typedef float32x2x2_t f32x2x2_t; + + /** + * @brief 32-bit floating-point 64-bit vector triplet data type + */ + typedef float32x2x3_t f32x2x3_t; + + /** + * @brief 32-bit floating-point 64-bit vector quadruplet data type + */ + typedef float32x2x4_t f32x2x4_t; + + + /** + * @brief 32-bit fractional 64-bit vector pair data type in 1.31 format + */ + typedef int32x2x2_t q31x2x2_t; + + /** + * @brief 32-bit fractional 64-bit vector triplet data type in 1.31 format + */ + typedef int32x2x3_t q31x2x3_t; + + /** + * @brief 32-bit fractional 64-bit vector quadruplet data type in 1.31 format + */ + typedef int32x4x3_t q31x2x4_t; + + /** + * @brief 16-bit fractional 64-bit vector pair data type in 1.15 format + */ + typedef int16x4x2_t q15x4x2_t; + + /** + * @brief 16-bit fractional 64-bit vector triplet data type in 1.15 format + */ + typedef int16x4x2_t q15x4x3_t; + + /** + * @brief 16-bit fractional 64-bit vector quadruplet data type in 1.15 format + */ + typedef int16x4x3_t q15x4x4_t; + + /** + * @brief 8-bit fractional 64-bit vector pair data type in 1.7 format + */ + typedef int8x8x2_t q7x8x2_t; + + /** + * @brief 8-bit fractional 64-bit vector triplet data type in 1.7 format + */ + typedef int8x8x3_t q7x8x3_t; + + /** + * @brief 8-bit fractional 64-bit vector quadruplet data type in 1.7 format + */ + typedef int8x8x4_t q7x8x4_t; + + /** + * @brief 32-bit ubiquitous 64-bit vector data type + */ + typedef union _any32x2_t + { + float32x2_t f; + int32x2_t i; + } any32x2_t; + + + /** + * @brief 32-bit status 64-bit vector data type. + */ + typedef int32x4_t status32x2_t; + + /** + * @brief 16-bit status 64-bit vector data type. + */ + typedef int16x8_t status16x4_t; + + /** + * @brief 8-bit status 64-bit vector data type. + */ + typedef int8x16_t status8x8_t; + +#endif + + + + + +#define F64_MAX ((float64_t)DBL_MAX) +#define F32_MAX ((float32_t)FLT_MAX) + + + +#define F64_MIN (-DBL_MAX) +#define F32_MIN (-FLT_MAX) + + + +#define F64_ABSMAX ((float64_t)DBL_MAX) +#define F32_ABSMAX ((float32_t)FLT_MAX) + + + +#define F64_ABSMIN ((float64_t)0.0) +#define F32_ABSMIN ((float32_t)0.0) + + +#define Q31_MAX ((q31_t)(0x7FFFFFFFL)) +#define Q15_MAX ((q15_t)(0x7FFF)) +#define Q7_MAX ((q7_t)(0x7F)) +#define Q31_MIN ((q31_t)(0x80000000L)) +#define Q15_MIN ((q15_t)(0x8000)) +#define Q7_MIN ((q7_t)(0x80)) + +#define Q31_ABSMAX ((q31_t)(0x7FFFFFFFL)) +#define Q15_ABSMAX ((q15_t)(0x7FFF)) +#define Q7_ABSMAX ((q7_t)(0x7F)) +#define Q31_ABSMIN ((q31_t)0) +#define Q15_ABSMIN ((q15_t)0) +#define Q7_ABSMIN ((q7_t)0) + + /* Dimension C vector space */ + #define CMPLX_DIM 2 + + /** + * @brief Error status returned by some functions in the library. + */ + + typedef enum + { + ARM_MATH_SUCCESS = 0, /**< No error */ + ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */ + ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */ + ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation */ + ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */ + ARM_MATH_SINGULAR = -5, /**< Input matrix is singular and cannot be inverted */ + ARM_MATH_TEST_FAILURE = -6, /**< Test Failed */ + ARM_MATH_DECOMPOSITION_FAILURE = -7 /**< Decomposition Failed */ + } arm_status; + + +#ifdef __cplusplus +} +#endif + +#endif /*ifndef _ARM_MATH_TYPES_H_ */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_math_types_f16.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_math_types_f16.h new file mode 100644 index 000000000..744dc38f1 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_math_types_f16.h @@ -0,0 +1,163 @@ +/****************************************************************************** + * @file arm_math_types_f16.h + * @brief Public header file for f16 function of the CMSIS DSP Library + * @version V1.10.0 + * @date 08 July 2021 + * Target Processor: Cortex-M and Cortex-A cores + ******************************************************************************/ +/* + * Copyright (c) 2010-2021 Arm Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_MATH_TYPES_F16_H +#define _ARM_MATH_TYPES_F16_H + +#include "arm_math_types.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +#if !defined( __CC_ARM ) + +/** + * @brief 16-bit floating-point type definition. + * This is already defined in arm_mve.h + * + * This is not fully supported on ARM AC5. + */ + +/* + +Check if the type __fp16 is available. +If it is not available, f16 version of the kernels +won't be built. + +*/ +#if !(__ARM_FEATURE_MVE & 2) + #if !defined(DISABLEFLOAT16) + #if defined(__ARM_FP16_FORMAT_IEEE) || defined(__ARM_FP16_FORMAT_ALTERNATIVE) + typedef __fp16 float16_t; + #define ARM_FLOAT16_SUPPORTED + #endif + #endif +#else + /* When Vector float16, this flag is always defined and can't be disabled */ + #define ARM_FLOAT16_SUPPORTED +#endif + +#if defined(ARM_MATH_NEON) || (defined(ARM_MATH_MVEF) && !defined(ARM_MATH_AUTOVECTORIZE)) /* floating point vector*/ + +#if defined(ARM_MATH_MVE_FLOAT16) || defined(ARM_MATH_NEON_FLOAT16) + + /** + * @brief 16-bit floating-point 128-bit vector data type + */ + typedef __ALIGNED(2) float16x8_t f16x8_t; + + /** + * @brief 16-bit floating-point 128-bit vector pair data type + */ + typedef float16x8x2_t f16x8x2_t; + + /** + * @brief 16-bit floating-point 128-bit vector quadruplet data type + */ + typedef float16x8x4_t f16x8x4_t; + + /** + * @brief 16-bit ubiquitous 128-bit vector data type + */ + typedef union _any16x8_t + { + float16x8_t f; + int16x8_t i; + } any16x8_t; +#endif + +#endif + +#if defined(ARM_MATH_NEON) + + +#if defined(ARM_MATH_NEON_FLOAT16) + /** + * @brief 16-bit float 64-bit vector data type. + */ + typedef __ALIGNED(2) float16x4_t f16x4_t; + + /** + * @brief 16-bit floating-point 128-bit vector triplet data type + */ + typedef float16x8x3_t f16x8x3_t; + + /** + * @brief 16-bit floating-point 64-bit vector pair data type + */ + typedef float16x4x2_t f16x4x2_t; + + /** + * @brief 16-bit floating-point 64-bit vector triplet data type + */ + typedef float16x4x3_t f16x4x3_t; + + /** + * @brief 16-bit floating-point 64-bit vector quadruplet data type + */ + typedef float16x4x4_t f16x4x4_t; + + /** + * @brief 16-bit ubiquitous 64-bit vector data type + */ + typedef union _any16x4_t + { + float16x4_t f; + int16x4_t i; + } any16x4_t; +#endif + +#endif + + + +#if defined(ARM_FLOAT16_SUPPORTED) + +#if defined(__ICCARM__) + +#define F16INFINITY ((float16_t) INFINITY) + +#else + +#define F16INFINITY ((float16_t)__builtin_inf()) + +#endif + +#define F16_MAX ((float16_t)__FLT16_MAX__) +#define F16_MIN (-(_Float16)__FLT16_MAX__) + +#define F16_ABSMAX ((float16_t)__FLT16_MAX__) +#define F16_ABSMIN ((float16_t)0.0f16) + +#endif /* ARM_FLOAT16_SUPPORTED*/ +#endif /* !defined( __CC_ARM ) */ + +#ifdef __cplusplus +} +#endif + +#endif /* _ARM_MATH_F16_H */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_mve_tables.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_mve_tables.h new file mode 100644 index 000000000..c4f8bf082 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_mve_tables.h @@ -0,0 +1,231 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_mve_tables.h + * Description: common tables like fft twiddle factors, Bitreverse, reciprocal etc + * used for MVE implementation only + * + * @version V1.10.0 + * @date 04 October 2021 + * + * Target Processor: Cortex-M and Cortex-A cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + #ifndef _ARM_MVE_TABLES_H + #define _ARM_MVE_TABLES_H + +#include "arm_math_types.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + + + + +#if defined(ARM_MATH_MVEF) && !defined(ARM_MATH_AUTOVECTORIZE) + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_16) || defined(ARM_TABLE_TWIDDLECOEF_F32_32) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_16_f32[2]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_16_f32[2]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_16_f32[2]; +extern float32_t rearranged_twiddle_stride1_16_f32[8]; +extern float32_t rearranged_twiddle_stride2_16_f32[8]; +extern float32_t rearranged_twiddle_stride3_16_f32[8]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_64) || defined(ARM_TABLE_TWIDDLECOEF_F32_128) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_64_f32[3]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_64_f32[3]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_64_f32[3]; +extern float32_t rearranged_twiddle_stride1_64_f32[40]; +extern float32_t rearranged_twiddle_stride2_64_f32[40]; +extern float32_t rearranged_twiddle_stride3_64_f32[40]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_256) || defined(ARM_TABLE_TWIDDLECOEF_F32_512) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_256_f32[4]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_256_f32[4]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_256_f32[4]; +extern float32_t rearranged_twiddle_stride1_256_f32[168]; +extern float32_t rearranged_twiddle_stride2_256_f32[168]; +extern float32_t rearranged_twiddle_stride3_256_f32[168]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_1024) || defined(ARM_TABLE_TWIDDLECOEF_F32_2048) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_1024_f32[5]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_1024_f32[5]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_1024_f32[5]; +extern float32_t rearranged_twiddle_stride1_1024_f32[680]; +extern float32_t rearranged_twiddle_stride2_1024_f32[680]; +extern float32_t rearranged_twiddle_stride3_1024_f32[680]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F32_4096) || defined(ARM_TABLE_TWIDDLECOEF_F32_8192) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_4096_f32[6]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_4096_f32[6]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_4096_f32[6]; +extern float32_t rearranged_twiddle_stride1_4096_f32[2728]; +extern float32_t rearranged_twiddle_stride2_4096_f32[2728]; +extern float32_t rearranged_twiddle_stride3_4096_f32[2728]; +#endif + + +#endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) */ + +#endif /* defined(ARM_MATH_MVEF) && !defined(ARM_MATH_AUTOVECTORIZE) */ + + + +#if defined(ARM_MATH_MVEI) && !defined(ARM_MATH_AUTOVECTORIZE) + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_16) || defined(ARM_TABLE_TWIDDLECOEF_Q31_32) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_16_q31[2]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_16_q31[2]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_16_q31[2]; +extern q31_t rearranged_twiddle_stride1_16_q31[8]; +extern q31_t rearranged_twiddle_stride2_16_q31[8]; +extern q31_t rearranged_twiddle_stride3_16_q31[8]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_64) || defined(ARM_TABLE_TWIDDLECOEF_Q31_128) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_64_q31[3]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_64_q31[3]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_64_q31[3]; +extern q31_t rearranged_twiddle_stride1_64_q31[40]; +extern q31_t rearranged_twiddle_stride2_64_q31[40]; +extern q31_t rearranged_twiddle_stride3_64_q31[40]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_256) || defined(ARM_TABLE_TWIDDLECOEF_Q31_512) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_256_q31[4]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_256_q31[4]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_256_q31[4]; +extern q31_t rearranged_twiddle_stride1_256_q31[168]; +extern q31_t rearranged_twiddle_stride2_256_q31[168]; +extern q31_t rearranged_twiddle_stride3_256_q31[168]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_1024) || defined(ARM_TABLE_TWIDDLECOEF_Q31_2048) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_1024_q31[5]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_1024_q31[5]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_1024_q31[5]; +extern q31_t rearranged_twiddle_stride1_1024_q31[680]; +extern q31_t rearranged_twiddle_stride2_1024_q31[680]; +extern q31_t rearranged_twiddle_stride3_1024_q31[680]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q31_4096) || defined(ARM_TABLE_TWIDDLECOEF_Q31_8192) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_4096_q31[6]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_4096_q31[6]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_4096_q31[6]; +extern q31_t rearranged_twiddle_stride1_4096_q31[2728]; +extern q31_t rearranged_twiddle_stride2_4096_q31[2728]; +extern q31_t rearranged_twiddle_stride3_4096_q31[2728]; +#endif + + +#endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) */ + +#endif /* defined(ARM_MATH_MVEI) */ + + + +#if defined(ARM_MATH_MVEI) && !defined(ARM_MATH_AUTOVECTORIZE) + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_16) || defined(ARM_TABLE_TWIDDLECOEF_Q15_32) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_16_q15[2]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_16_q15[2]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_16_q15[2]; +extern q15_t rearranged_twiddle_stride1_16_q15[8]; +extern q15_t rearranged_twiddle_stride2_16_q15[8]; +extern q15_t rearranged_twiddle_stride3_16_q15[8]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_64) || defined(ARM_TABLE_TWIDDLECOEF_Q15_128) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_64_q15[3]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_64_q15[3]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_64_q15[3]; +extern q15_t rearranged_twiddle_stride1_64_q15[40]; +extern q15_t rearranged_twiddle_stride2_64_q15[40]; +extern q15_t rearranged_twiddle_stride3_64_q15[40]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_256) || defined(ARM_TABLE_TWIDDLECOEF_Q15_512) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_256_q15[4]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_256_q15[4]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_256_q15[4]; +extern q15_t rearranged_twiddle_stride1_256_q15[168]; +extern q15_t rearranged_twiddle_stride2_256_q15[168]; +extern q15_t rearranged_twiddle_stride3_256_q15[168]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_1024) || defined(ARM_TABLE_TWIDDLECOEF_Q15_2048) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_1024_q15[5]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_1024_q15[5]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_1024_q15[5]; +extern q15_t rearranged_twiddle_stride1_1024_q15[680]; +extern q15_t rearranged_twiddle_stride2_1024_q15[680]; +extern q15_t rearranged_twiddle_stride3_1024_q15[680]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_Q15_4096) || defined(ARM_TABLE_TWIDDLECOEF_Q15_8192) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_4096_q15[6]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_4096_q15[6]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_4096_q15[6]; +extern q15_t rearranged_twiddle_stride1_4096_q15[2728]; +extern q15_t rearranged_twiddle_stride2_4096_q15[2728]; +extern q15_t rearranged_twiddle_stride3_4096_q15[2728]; +#endif + + +#endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) */ + +#endif /* defined(ARM_MATH_MVEI) */ + + + +#ifdef __cplusplus +} +#endif + +#endif /*_ARM_MVE_TABLES_H*/ + diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_mve_tables_f16.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_mve_tables_f16.h new file mode 100644 index 000000000..dc9520309 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_mve_tables_f16.h @@ -0,0 +1,109 @@ +/* ---------------------------------------------------------------------- + * Project: CMSIS DSP Library + * Title: arm_mve_tables_f16.h + * Description: common tables like fft twiddle factors, Bitreverse, reciprocal etc + * used for MVE implementation only + * + * @version V1.10.0 + * @date 04 October 2021 + * + * Target Processor: Cortex-M and Cortex-A cores + * -------------------------------------------------------------------- */ +/* + * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + #ifndef _ARM_MVE_TABLES_F16_H + #define _ARM_MVE_TABLES_F16_H + +#include "arm_math_types_f16.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + + + + +#if defined(ARM_MATH_MVE_FLOAT16) && !defined(ARM_MATH_AUTOVECTORIZE) + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_16) || defined(ARM_TABLE_TWIDDLECOEF_F16_32) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_16_f16[2]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_16_f16[2]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_16_f16[2]; +extern float16_t rearranged_twiddle_stride1_16_f16[8]; +extern float16_t rearranged_twiddle_stride2_16_f16[8]; +extern float16_t rearranged_twiddle_stride3_16_f16[8]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_64) || defined(ARM_TABLE_TWIDDLECOEF_F16_128) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_64_f16[3]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_64_f16[3]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_64_f16[3]; +extern float16_t rearranged_twiddle_stride1_64_f16[40]; +extern float16_t rearranged_twiddle_stride2_64_f16[40]; +extern float16_t rearranged_twiddle_stride3_64_f16[40]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_256) || defined(ARM_TABLE_TWIDDLECOEF_F16_512) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_256_f16[4]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_256_f16[4]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_256_f16[4]; +extern float16_t rearranged_twiddle_stride1_256_f16[168]; +extern float16_t rearranged_twiddle_stride2_256_f16[168]; +extern float16_t rearranged_twiddle_stride3_256_f16[168]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_1024) || defined(ARM_TABLE_TWIDDLECOEF_F16_2048) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_1024_f16[5]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_1024_f16[5]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_1024_f16[5]; +extern float16_t rearranged_twiddle_stride1_1024_f16[680]; +extern float16_t rearranged_twiddle_stride2_1024_f16[680]; +extern float16_t rearranged_twiddle_stride3_1024_f16[680]; +#endif + +#if !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_ALL_FFT_TABLES) || defined(ARM_TABLE_TWIDDLECOEF_F16_4096) || defined(ARM_TABLE_TWIDDLECOEF_F16_8192) + +extern uint32_t rearranged_twiddle_tab_stride1_arr_4096_f16[6]; +extern uint32_t rearranged_twiddle_tab_stride2_arr_4096_f16[6]; +extern uint32_t rearranged_twiddle_tab_stride3_arr_4096_f16[6]; +extern float16_t rearranged_twiddle_stride1_4096_f16[2728]; +extern float16_t rearranged_twiddle_stride2_4096_f16[2728]; +extern float16_t rearranged_twiddle_stride3_4096_f16[2728]; +#endif + + +#endif /* !defined(ARM_DSP_CONFIG_TABLES) || defined(ARM_FFT_ALLOW_TABLES) */ + +#endif /* defined(ARM_MATH_MVE_FLOAT16) && !defined(ARM_MATH_AUTOVECTORIZE) */ + + + +#ifdef __cplusplus +} +#endif + +#endif /*_ARM_MVE_TABLES_F16_H*/ + diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_vec_math.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_vec_math.h new file mode 100644 index 000000000..d9134c541 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_vec_math.h @@ -0,0 +1,373 @@ +/****************************************************************************** + * @file arm_vec_math.h + * @brief Public header file for CMSIS DSP Library + * @version V1.10.0 + * @date 08 July 2021 + * Target Processor: Cortex-M and Cortex-A cores + ******************************************************************************/ +/* + * Copyright (c) 2010-2021 Arm Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_VEC_MATH_H +#define _ARM_VEC_MATH_H + +#include "arm_math_types.h" +#include "arm_common_tables.h" +#include "arm_helium_utils.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +#if (defined(ARM_MATH_MVEF) || defined(ARM_MATH_HELIUM)) && !defined(ARM_MATH_AUTOVECTORIZE) + +#define INV_NEWTON_INIT_F32 0x7EF127EA + +static const float32_t __logf_rng_f32=0.693147180f; + + +/* fast inverse approximation (3x newton) */ +__STATIC_INLINE f32x4_t vrecip_medprec_f32( + f32x4_t x) +{ + q31x4_t m; + f32x4_t b; + any32x4_t xinv; + f32x4_t ax = vabsq(x); + + xinv.f = ax; + m = 0x3F800000 - (xinv.i & 0x7F800000); + xinv.i = xinv.i + m; + xinv.f = 1.41176471f - 0.47058824f * xinv.f; + xinv.i = xinv.i + m; + + b = 2.0f - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f - xinv.f * ax; + xinv.f = xinv.f * b; + + xinv.f = vdupq_m(xinv.f, INFINITY, vcmpeqq(x, 0.0f)); + /* + * restore sign + */ + xinv.f = vnegq_m(xinv.f, xinv.f, vcmpltq(x, 0.0f)); + + return xinv.f; +} + +/* fast inverse approximation (4x newton) */ +__STATIC_INLINE f32x4_t vrecip_hiprec_f32( + f32x4_t x) +{ + q31x4_t m; + f32x4_t b; + any32x4_t xinv; + f32x4_t ax = vabsq(x); + + xinv.f = ax; + + m = 0x3F800000 - (xinv.i & 0x7F800000); + xinv.i = xinv.i + m; + xinv.f = 1.41176471f - 0.47058824f * xinv.f; + xinv.i = xinv.i + m; + + b = 2.0f - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f - xinv.f * ax; + xinv.f = xinv.f * b; + + xinv.f = vdupq_m(xinv.f, INFINITY, vcmpeqq(x, 0.0f)); + /* + * restore sign + */ + xinv.f = vnegq_m(xinv.f, xinv.f, vcmpltq(x, 0.0f)); + + return xinv.f; +} + +__STATIC_INLINE f32x4_t vdiv_f32( + f32x4_t num, f32x4_t den) +{ + return vmulq(num, vrecip_hiprec_f32(den)); +} + +/** + @brief Single-precision taylor dev. + @param[in] x f32 quad vector input + @param[in] coeffs f32 quad vector coeffs + @return destination f32 quad vector + */ + +__STATIC_INLINE f32x4_t vtaylor_polyq_f32( + f32x4_t x, + const float32_t * coeffs) +{ + f32x4_t A = vfmasq(vdupq_n_f32(coeffs[4]), x, coeffs[0]); + f32x4_t B = vfmasq(vdupq_n_f32(coeffs[6]), x, coeffs[2]); + f32x4_t C = vfmasq(vdupq_n_f32(coeffs[5]), x, coeffs[1]); + f32x4_t D = vfmasq(vdupq_n_f32(coeffs[7]), x, coeffs[3]); + f32x4_t x2 = vmulq(x, x); + f32x4_t x4 = vmulq(x2, x2); + f32x4_t res = vfmaq(vfmaq_f32(A, B, x2), vfmaq_f32(C, D, x2), x4); + + return res; +} + +__STATIC_INLINE f32x4_t vmant_exp_f32( + f32x4_t x, + int32x4_t * e) +{ + any32x4_t r; + int32x4_t n; + + r.f = x; + n = r.i >> 23; + n = n - 127; + r.i = r.i - (n << 23); + + *e = n; + return r.f; +} + + +__STATIC_INLINE f32x4_t vlogq_f32(f32x4_t vecIn) +{ + q31x4_t vecExpUnBiased; + f32x4_t vecTmpFlt0, vecTmpFlt1; + f32x4_t vecAcc0, vecAcc1, vecAcc2, vecAcc3; + f32x4_t vecExpUnBiasedFlt; + + /* + * extract exponent + */ + vecTmpFlt1 = vmant_exp_f32(vecIn, &vecExpUnBiased); + + vecTmpFlt0 = vecTmpFlt1 * vecTmpFlt1; + /* + * a = (__logf_lut_f32[4] * r.f) + (__logf_lut_f32[0]); + */ + vecAcc0 = vdupq_n_f32(__logf_lut_f32[0]); + vecAcc0 = vfmaq(vecAcc0, vecTmpFlt1, __logf_lut_f32[4]); + /* + * b = (__logf_lut_f32[6] * r.f) + (__logf_lut_f32[2]); + */ + vecAcc1 = vdupq_n_f32(__logf_lut_f32[2]); + vecAcc1 = vfmaq(vecAcc1, vecTmpFlt1, __logf_lut_f32[6]); + /* + * c = (__logf_lut_f32[5] * r.f) + (__logf_lut_f32[1]); + */ + vecAcc2 = vdupq_n_f32(__logf_lut_f32[1]); + vecAcc2 = vfmaq(vecAcc2, vecTmpFlt1, __logf_lut_f32[5]); + /* + * d = (__logf_lut_f32[7] * r.f) + (__logf_lut_f32[3]); + */ + vecAcc3 = vdupq_n_f32(__logf_lut_f32[3]); + vecAcc3 = vfmaq(vecAcc3, vecTmpFlt1, __logf_lut_f32[7]); + /* + * a = a + b * xx; + */ + vecAcc0 = vfmaq(vecAcc0, vecAcc1, vecTmpFlt0); + /* + * c = c + d * xx; + */ + vecAcc2 = vfmaq(vecAcc2, vecAcc3, vecTmpFlt0); + /* + * xx = xx * xx; + */ + vecTmpFlt0 = vecTmpFlt0 * vecTmpFlt0; + vecExpUnBiasedFlt = vcvtq_f32_s32(vecExpUnBiased); + /* + * r.f = a + c * xx; + */ + vecAcc0 = vfmaq(vecAcc0, vecAcc2, vecTmpFlt0); + /* + * add exponent + * r.f = r.f + ((float32_t) m) * __logf_rng_f32; + */ + vecAcc0 = vfmaq(vecAcc0, vecExpUnBiasedFlt, __logf_rng_f32); + // set log0 down to -inf + vecAcc0 = vdupq_m(vecAcc0, -INFINITY, vcmpeqq(vecIn, 0.0f)); + return vecAcc0; +} + +__STATIC_INLINE f32x4_t vexpq_f32( + f32x4_t x) +{ + // Perform range reduction [-log(2),log(2)] + int32x4_t m = vcvtq_s32_f32(vmulq_n_f32(x, 1.4426950408f)); + f32x4_t val = vfmsq_f32(x, vcvtq_f32_s32(m), vdupq_n_f32(0.6931471805f)); + + // Polynomial Approximation + f32x4_t poly = vtaylor_polyq_f32(val, exp_tab); + + // Reconstruct + poly = (f32x4_t) (vqaddq_s32((q31x4_t) (poly), vqshlq_n_s32(m, 23))); + + poly = vdupq_m(poly, 0.0f, vcmpltq_n_s32(m, -126)); + return poly; +} + +__STATIC_INLINE f32x4_t arm_vec_exponent_f32(f32x4_t x, int32_t nb) +{ + f32x4_t r = x; + nb--; + while (nb > 0) { + r = vmulq(r, x); + nb--; + } + return (r); +} + +__STATIC_INLINE f32x4_t vrecip_f32(f32x4_t vecIn) +{ + f32x4_t vecSx, vecW, vecTmp; + any32x4_t v; + + vecSx = vabsq(vecIn); + + v.f = vecIn; + v.i = vsubq(vdupq_n_s32(INV_NEWTON_INIT_F32), v.i); + + vecW = vmulq(vecSx, v.f); + + // v.f = v.f * (8 + w * (-28 + w * (56 + w * (-70 + w *(56 + w * (-28 + w * (8 - w))))))); + vecTmp = vsubq(vdupq_n_f32(8.0f), vecW); + vecTmp = vfmasq(vecW, vecTmp, -28.0f); + vecTmp = vfmasq(vecW, vecTmp, 56.0f); + vecTmp = vfmasq(vecW, vecTmp, -70.0f); + vecTmp = vfmasq(vecW, vecTmp, 56.0f); + vecTmp = vfmasq(vecW, vecTmp, -28.0f); + vecTmp = vfmasq(vecW, vecTmp, 8.0f); + v.f = vmulq(v.f, vecTmp); + + v.f = vdupq_m(v.f, INFINITY, vcmpeqq(vecIn, 0.0f)); + /* + * restore sign + */ + v.f = vnegq_m(v.f, v.f, vcmpltq(vecIn, 0.0f)); + return v.f; +} + +__STATIC_INLINE f32x4_t vtanhq_f32( + f32x4_t val) +{ + f32x4_t x = + vminnmq_f32(vmaxnmq_f32(val, vdupq_n_f32(-10.f)), vdupq_n_f32(10.0f)); + f32x4_t exp2x = vexpq_f32(vmulq_n_f32(x, 2.f)); + f32x4_t num = vsubq_n_f32(exp2x, 1.f); + f32x4_t den = vaddq_n_f32(exp2x, 1.f); + f32x4_t tanh = vmulq_f32(num, vrecip_f32(den)); + return tanh; +} + +__STATIC_INLINE f32x4_t vpowq_f32( + f32x4_t val, + f32x4_t n) +{ + return vexpq_f32(vmulq_f32(n, vlogq_f32(val))); +} + +#endif /* (defined(ARM_MATH_MVEF) || defined(ARM_MATH_HELIUM)) && !defined(ARM_MATH_AUTOVECTORIZE)*/ + +#if (defined(ARM_MATH_MVEI) || defined(ARM_MATH_HELIUM)) && !defined(ARM_MATH_AUTOVECTORIZE) +#endif /* (defined(ARM_MATH_MVEI) || defined(ARM_MATH_HELIUM)) */ + +#if (defined(ARM_MATH_NEON) || defined(ARM_MATH_NEON_EXPERIMENTAL)) && !defined(ARM_MATH_AUTOVECTORIZE) + +#include "NEMath.h" +/** + * @brief Vectorized integer exponentiation + * @param[in] x value + * @param[in] nb integer exponent >= 1 + * @return x^nb + * + */ +__STATIC_INLINE float32x4_t arm_vec_exponent_f32(float32x4_t x, int32_t nb) +{ + float32x4_t r = x; + nb --; + while(nb > 0) + { + r = vmulq_f32(r , x); + nb--; + } + return(r); +} + + +__STATIC_INLINE float32x4_t __arm_vec_sqrt_f32_neon(float32x4_t x) +{ + float32x4_t x1 = vmaxq_f32(x, vdupq_n_f32(FLT_MIN)); + float32x4_t e = vrsqrteq_f32(x1); + e = vmulq_f32(vrsqrtsq_f32(vmulq_f32(x1, e), e), e); + e = vmulq_f32(vrsqrtsq_f32(vmulq_f32(x1, e), e), e); + return vmulq_f32(x, e); +} + +__STATIC_INLINE int16x8_t __arm_vec_sqrt_q15_neon(int16x8_t vec) +{ + float32x4_t tempF; + int32x4_t tempHI,tempLO; + + tempLO = vmovl_s16(vget_low_s16(vec)); + tempF = vcvtq_n_f32_s32(tempLO,15); + tempF = __arm_vec_sqrt_f32_neon(tempF); + tempLO = vcvtq_n_s32_f32(tempF,15); + + tempHI = vmovl_s16(vget_high_s16(vec)); + tempF = vcvtq_n_f32_s32(tempHI,15); + tempF = __arm_vec_sqrt_f32_neon(tempF); + tempHI = vcvtq_n_s32_f32(tempF,15); + + return(vcombine_s16(vqmovn_s32(tempLO),vqmovn_s32(tempHI))); +} + +__STATIC_INLINE int32x4_t __arm_vec_sqrt_q31_neon(int32x4_t vec) +{ + float32x4_t temp; + + temp = vcvtq_n_f32_s32(vec,31); + temp = __arm_vec_sqrt_f32_neon(temp); + return(vcvtq_n_s32_f32(temp,31)); +} + +#endif /* (defined(ARM_MATH_NEON) || defined(ARM_MATH_NEON_EXPERIMENTAL)) && !defined(ARM_MATH_AUTOVECTORIZE) */ + +#ifdef __cplusplus +} +#endif + + +#endif /* _ARM_VEC_MATH_H */ + +/** + * + * End of file. + */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/arm_vec_math_f16.h b/armlib/at32_sys/cmsis/cm4/core_support/arm_vec_math_f16.h new file mode 100644 index 000000000..91bd28aaf --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/arm_vec_math_f16.h @@ -0,0 +1,312 @@ +/****************************************************************************** + * @file arm_vec_math_f16.h + * @brief Public header file for CMSIS DSP Library + * @version V1.10.0 + * @date 08 July 2021 + * Target Processor: Cortex-M and Cortex-A cores + ******************************************************************************/ +/* + * Copyright (c) 2010-2021 Arm Limited or its affiliates. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _ARM_VEC_MATH_F16_H +#define _ARM_VEC_MATH_F16_H + +#include "arm_math_types_f16.h" +#include "arm_common_tables_f16.h" +#include "arm_helium_utils.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +#if defined(ARM_FLOAT16_SUPPORTED) + + +#if defined(ARM_MATH_MVE_FLOAT16) && !defined(ARM_MATH_AUTOVECTORIZE) + + +static const float16_t __logf_rng_f16=0.693147180f16; + +/* fast inverse approximation (3x newton) */ +__STATIC_INLINE f16x8_t vrecip_medprec_f16( + f16x8_t x) +{ + q15x8_t m; + f16x8_t b; + any16x8_t xinv; + f16x8_t ax = vabsq(x); + + xinv.f = ax; + + m = 0x03c00 - (xinv.i & 0x07c00); + xinv.i = xinv.i + m; + xinv.f = 1.41176471f16 - 0.47058824f16 * xinv.f; + xinv.i = xinv.i + m; + + b = 2.0f16 - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f16 - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f16 - xinv.f * ax; + xinv.f = xinv.f * b; + + xinv.f = vdupq_m_n_f16(xinv.f, F16INFINITY, vcmpeqq_n_f16(x, 0.0f)); + /* + * restore sign + */ + xinv.f = vnegq_m(xinv.f, xinv.f, vcmpltq_n_f16(x, 0.0f)); + + return xinv.f; +} + +/* fast inverse approximation (4x newton) */ +__STATIC_INLINE f16x8_t vrecip_hiprec_f16( + f16x8_t x) +{ + q15x8_t m; + f16x8_t b; + any16x8_t xinv; + f16x8_t ax = vabsq(x); + + xinv.f = ax; + + m = 0x03c00 - (xinv.i & 0x07c00); + xinv.i = xinv.i + m; + xinv.f = 1.41176471f16 - 0.47058824f16 * xinv.f; + xinv.i = xinv.i + m; + + b = 2.0f16 - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f16 - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f16 - xinv.f * ax; + xinv.f = xinv.f * b; + + b = 2.0f16 - xinv.f * ax; + xinv.f = xinv.f * b; + + xinv.f = vdupq_m_n_f16(xinv.f, F16INFINITY, vcmpeqq_n_f16(x, 0.0f)); + /* + * restore sign + */ + xinv.f = vnegq_m(xinv.f, xinv.f, vcmpltq_n_f16(x, 0.0f)); + + return xinv.f; +} + +__STATIC_INLINE f16x8_t vdiv_f16( + f16x8_t num, f16x8_t den) +{ + return vmulq(num, vrecip_hiprec_f16(den)); +} + + +/** + @brief Single-precision taylor dev. + @param[in] x f16 vector input + @param[in] coeffs f16 vector coeffs + @return destination f16 vector + */ + +__STATIC_INLINE float16x8_t vtaylor_polyq_f16( + float16x8_t x, + const float16_t * coeffs) +{ + float16x8_t A = vfmasq(vdupq_n_f16(coeffs[4]), x, coeffs[0]); + float16x8_t B = vfmasq(vdupq_n_f16(coeffs[6]), x, coeffs[2]); + float16x8_t C = vfmasq(vdupq_n_f16(coeffs[5]), x, coeffs[1]); + float16x8_t D = vfmasq(vdupq_n_f16(coeffs[7]), x, coeffs[3]); + float16x8_t x2 = vmulq(x, x); + float16x8_t x4 = vmulq(x2, x2); + float16x8_t res = vfmaq(vfmaq_f16(A, B, x2), vfmaq_f16(C, D, x2), x4); + + return res; +} + +#define VMANT_EXP_F16(x) \ + any16x8_t r; \ + int16x8_t n; \ + \ + r.f = x; \ + n = r.i >> 10; \ + n = n - 15; \ + r.i = r.i - (n << 10);\ + \ + vecExpUnBiased = n; \ + vecTmpFlt1 = r.f; + +__STATIC_INLINE float16x8_t vlogq_f16(float16x8_t vecIn) +{ + q15x8_t vecExpUnBiased; + float16x8_t vecTmpFlt0, vecTmpFlt1; + float16x8_t vecAcc0, vecAcc1, vecAcc2, vecAcc3; + float16x8_t vecExpUnBiasedFlt; + + /* + * extract exponent + */ + VMANT_EXP_F16(vecIn); + + vecTmpFlt0 = vecTmpFlt1 * vecTmpFlt1; + /* + * a = (__logf_lut_f16[4] * r.f) + (__logf_lut_f16[0]); + */ + vecAcc0 = vdupq_n_f16(__logf_lut_f16[0]); + vecAcc0 = vfmaq(vecAcc0, vecTmpFlt1, __logf_lut_f16[4]); + /* + * b = (__logf_lut_f16[6] * r.f) + (__logf_lut_f16[2]); + */ + vecAcc1 = vdupq_n_f16(__logf_lut_f16[2]); + vecAcc1 = vfmaq(vecAcc1, vecTmpFlt1, __logf_lut_f16[6]); + /* + * c = (__logf_lut_f16[5] * r.f) + (__logf_lut_f16[1]); + */ + vecAcc2 = vdupq_n_f16(__logf_lut_f16[1]); + vecAcc2 = vfmaq(vecAcc2, vecTmpFlt1, __logf_lut_f16[5]); + /* + * d = (__logf_lut_f16[7] * r.f) + (__logf_lut_f16[3]); + */ + vecAcc3 = vdupq_n_f16(__logf_lut_f16[3]); + vecAcc3 = vfmaq(vecAcc3, vecTmpFlt1, __logf_lut_f16[7]); + /* + * a = a + b * xx; + */ + vecAcc0 = vfmaq(vecAcc0, vecAcc1, vecTmpFlt0); + /* + * c = c + d * xx; + */ + vecAcc2 = vfmaq(vecAcc2, vecAcc3, vecTmpFlt0); + /* + * xx = xx * xx; + */ + vecTmpFlt0 = vecTmpFlt0 * vecTmpFlt0; + vecExpUnBiasedFlt = vcvtq_f16_s16(vecExpUnBiased); + /* + * r.f = a + c * xx; + */ + vecAcc0 = vfmaq(vecAcc0, vecAcc2, vecTmpFlt0); + /* + * add exponent + * r.f = r.f + ((float32_t) m) * __logf_rng_f16; + */ + vecAcc0 = vfmaq(vecAcc0, vecExpUnBiasedFlt, __logf_rng_f16); + // set log0 down to -inf + vecAcc0 = vdupq_m_n_f16(vecAcc0, -(_Float16)F16INFINITY, vcmpeqq_n_f16(vecIn, 0.0f)); + return vecAcc0; +} + +__STATIC_INLINE float16x8_t vexpq_f16( + float16x8_t x) +{ + // Perform range reduction [-log(2),log(2)] + int16x8_t m = vcvtq_s16_f16(vmulq_n_f16(x, 1.4426950408f16)); + float16x8_t val = vfmsq_f16(x, vcvtq_f16_s16(m), vdupq_n_f16(0.6931471805f16)); + + // Polynomial Approximation + float16x8_t poly = vtaylor_polyq_f16(val, exp_tab_f16); + + // Reconstruct + poly = (float16x8_t) (vqaddq_s16((int16x8_t) (poly), vqshlq_n_s16(m, 10))); + + poly = vdupq_m_n_f16(poly, 0.0f16, vcmpltq_n_s16(m, -14)); + return poly; +} + +__STATIC_INLINE float16x8_t arm_vec_exponent_f16(float16x8_t x, int16_t nb) +{ + float16x8_t r = x; + nb--; + while (nb > 0) { + r = vmulq(r, x); + nb--; + } + return (r); +} + +__STATIC_INLINE f16x8_t vpowq_f16( + f16x8_t val, + f16x8_t n) +{ + return vexpq_f16(vmulq_f16(n, vlogq_f16(val))); +} + +#define INV_NEWTON_INIT_F16 0x7773 + +__STATIC_INLINE f16x8_t vrecip_f16(f16x8_t vecIn) +{ + f16x8_t vecSx, vecW, vecTmp; + any16x8_t v; + + vecSx = vabsq(vecIn); + + v.f = vecIn; + v.i = vsubq(vdupq_n_s16(INV_NEWTON_INIT_F16), v.i); + + vecW = vmulq(vecSx, v.f); + + // v.f = v.f * (8 + w * (-28 + w * (56 + w * (-70 + w *(56 + w * (-28 + w * (8 - w))))))); + vecTmp = vsubq(vdupq_n_f16(8.0f16), vecW); + vecTmp = vfmasq_n_f16(vecW, vecTmp, -28.0f16); + vecTmp = vfmasq_n_f16(vecW, vecTmp, 56.0f16); + vecTmp = vfmasq_n_f16(vecW, vecTmp, -70.0f16); + vecTmp = vfmasq_n_f16(vecW, vecTmp, 56.0f16); + vecTmp = vfmasq_n_f16(vecW, vecTmp, -28.0f16); + vecTmp = vfmasq_n_f16(vecW, vecTmp, 8.0f16); + v.f = vmulq(v.f, vecTmp); + + v.f = vdupq_m_n_f16(v.f, F16INFINITY, vcmpeqq_n_f16(vecIn, 0.0f)); + /* + * restore sign + */ + v.f = vnegq_m(v.f, v.f, vcmpltq_n_f16(vecIn, 0.0f)); + return v.f; +} + +__STATIC_INLINE f16x8_t vtanhq_f16( + f16x8_t val) +{ + f16x8_t x = + vminnmq_f16(vmaxnmq_f16(val, vdupq_n_f16(-10.f16)), vdupq_n_f16(10.0f16)); + f16x8_t exp2x = vexpq_f16(vmulq_n_f16(x, 2.f16)); + f16x8_t num = vsubq_n_f16(exp2x, 1.f16); + f16x8_t den = vaddq_n_f16(exp2x, 1.f16); + f16x8_t tanh = vmulq_f16(num, vrecip_f16(den)); + return tanh; +} + +#endif /* defined(ARM_MATH_MVE_FLOAT16) && !defined(ARM_MATH_AUTOVECTORIZE)*/ + + + +#ifdef __cplusplus +} +#endif + +#endif /* ARM FLOAT16 SUPPORTED */ + +#endif /* _ARM_VEC_MATH_F16_H */ + +/** + * + * End of file. + */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armcc.h b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armcc.h new file mode 100644 index 000000000..a955d4713 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armcc.h @@ -0,0 +1,888 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file + * @version V5.3.2 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use Arm Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ + (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) + #define __ARM_ARCH_6M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) + #define __ARM_ARCH_7M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) + #define __ARM_ARCH_7EM__ 1 +#endif + + /* __ARM_ARCH_8M_BASE__ not applicable */ + /* __ARM_ARCH_8M_MAIN__ not applicable */ + /* __ARM_ARCH_8_1M_MAIN__ not applicable */ + +/* CMSIS compiler control DSP macros */ +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __ARM_FEATURE_DSP 1 +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __memory_changed() +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __dsb(0xF) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; + __ISB(); +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armclang.h b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armclang.h new file mode 100644 index 000000000..691141774 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armclang.h @@ -0,0 +1,1503 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.4.3 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL Image$$STACKSEAL$$ZI$$Base +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} +#endif + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} +#endif + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armclang_ltm.h b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armclang_ltm.h new file mode 100644 index 000000000..1e255d590 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_armclang_ltm.h @@ -0,0 +1,1928 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.5.3 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2018-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL Image$$STACKSEAL$$ZI$$Base +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} +#endif + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +#ifndef __ARM_COMPAT_H +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} +#endif + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/cmsis_compiler.h b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_compiler.h new file mode 100644 index 000000000..adbf296f1 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_compiler.h @@ -0,0 +1,283 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.1.0 + * @date 09. October 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6.6 LTM (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/armlib/at32_sys/cmsis/cm4/core_support/cmsis_gcc.h b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_gcc.h new file mode 100644 index 000000000..c6e4d8c4d --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_gcc.h @@ -0,0 +1,2212 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.4.1 + * @date 27. May 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" +#pragma GCC diagnostic ignored "-Wnested-externs" // fix error: nested extern declaration of '_start' + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section(".vectors"))) +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL __StackSeal +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi":::"memory") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe":::"memory") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1, ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1, ARG2) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting special-purpose register PRIMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); + __ISB(); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); + __ISB(); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting special-purpose register FAULTMASK. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1, ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + +#define __USAT16(ARG1, ARG2) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16_RORn(uint32_t op1, uint32_t rotate) +{ + uint32_t result; + if (__builtin_constant_p(rotate) && ((rotate == 8U) || (rotate == 16U) || (rotate == 24U))) { + __ASM volatile ("sxtb16 %0, %1, ROR %2" : "=r" (result) : "r" (op1), "i" (rotate) ); + } else { + result = __SXTB16(__ROR(op1, rotate)) ; + } + return result; +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16_RORn(uint32_t op1, uint32_t op2, uint32_t rotate) +{ + uint32_t result; + if (__builtin_constant_p(rotate) && ((rotate == 8U) || (rotate == 16U) || (rotate == 24U))) { + __ASM volatile ("sxtab16 %0, %1, %2, ROR %3" : "=r" (result) : "r" (op1) , "r" (op2) , "i" (rotate)); + } else { + result = __SXTAB16(op1, __ROR(op2, rotate)); + } + return result; +} + + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +#define __PKHBT(ARG1,ARG2,ARG3) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +__extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/cmsis_iccarm.h b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_iccarm.h new file mode 100644 index 000000000..65b824b00 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_iccarm.h @@ -0,0 +1,1002 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.3.0 + * @date 14. April 2021 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2021 IAR Systems +// Copyright (c) 2017-2021 Arm Limited. All rights reserved. +// +// SPDX-License-Identifier: Apache-2.0 +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#undef __WEAK /* undo the definition from DLib_Defaults.h */ +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#ifndef __STACK_SEAL +#define __STACK_SEAL STACKSEAL$$Base +#endif + +#ifndef __TZ_STACK_SEAL_SIZE +#define __TZ_STACK_SEAL_SIZE 8U +#endif + +#ifndef __TZ_STACK_SEAL_VALUE +#define __TZ_STACK_SEAL_VALUE 0xFEF5EDA5FEF5EDA5ULL +#endif + +__STATIC_FORCEINLINE void __TZ_set_STACKSEAL_S (uint32_t* stackTop) { + *((uint64_t *)stackTop) = __TZ_STACK_SEAL_VALUE; +} +#endif + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __arm_wsr("CONTROL", control); + __iar_builtin_ISB(); +} + + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __arm_wsr("CONTROL_NS", control); + __iar_builtin_ISB(); +} + + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM volatile("RRX %0, %1" : "=r"(result) : "r" (value)); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + __iar_builtin_ISB(); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM volatile ("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM volatile ("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM volatile ("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM volatile ("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM volatile ("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM volatile ("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#define __SXTAB16_RORn(ARG1, ARG2, ARG3) __SXTAB16(ARG1, __ROR(ARG2, ARG3)) + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/cmsis_version.h b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_version.h new file mode 100644 index 000000000..8b4765f18 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.5 + * @date 02. February 2022 + ******************************************************************************/ +/* + * Copyright (c) 2009-2022 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 6U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/armlib/at32_sys/cmsis/cm4/core_support/core_cm4.h b/armlib/at32_sys/cmsis/cm4/core_support/core_cm4.h new file mode 100644 index 000000000..e21cd1492 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/core_cm4.h @@ -0,0 +1,2129 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.1.2 + * @date 04. June 2021 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_CFSR_MEMFAULTSR_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_CFSR_MEMFAULTSR_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_CFSR_MEMFAULTSR_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/armlib/at32_sys/cmsis/cm4/core_support/mpu_armv7.h b/armlib/at32_sys/cmsis/cm4/core_support/mpu_armv7.h new file mode 100644 index 000000000..d9eedf81a --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/mpu_armv7.h @@ -0,0 +1,275 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.1.2 + * @date 25. May 2020 + ******************************************************************************/ +/* + * Copyright (c) 2017-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if shareable) or 010b (if non-shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) >> 1U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DMB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rasr Value for RASR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rasr Value for RASR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcpy with strictly ordered memory access, e.g. used by code in ARM_MPU_Load(). +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/armlib/at32_sys/cmsis/cm4/core_support/mpu_armv8.h b/armlib/at32_sys/cmsis/cm4/core_support/mpu_armv8.h new file mode 100644 index 000000000..3de16efc8 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/mpu_armv8.h @@ -0,0 +1,352 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.3 + * @date 03. February 2021 + ******************************************************************************/ +/* + * Copyright (c) 2017-2021 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + ((((NT) & 1U) << 3U) | (((WB) & 1U) << 2U) | (((RA) & 1U) << 1U) | ((WA) & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) ((((O) & 0xFU) << 4U) | ((((O) & 0xFU) != 0U) ? ((I) & 0xFU) : (((I) & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) ((((RO) & 1U) << 1U) | ((NP) & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + (((BASE) & MPU_RBAR_BASE_Msk) | \ + (((SH) << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + (((XN) << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + (((LIMIT) & MPU_RLAR_LIMIT_Msk) | \ + (((IDX) << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + (((LIMIT) & MPU_RLAR_LIMIT_Msk) | \ + (((PXN) << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + (((IDX) << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DMB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + __DMB(); + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcpy with strictly ordered memory access, e.g. used by code in ARM_MPU_LoadEx() +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/armlib/at32_sys/cmsis/cm4/core_support/pmu_armv8.h b/armlib/at32_sys/cmsis/cm4/core_support/pmu_armv8.h new file mode 100644 index 000000000..f8f3d8935 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/core_support/pmu_armv8.h @@ -0,0 +1,337 @@ +/****************************************************************************** + * @file pmu_armv8.h + * @brief CMSIS PMU API for Armv8.1-M PMU + * @version V1.0.1 + * @date 15. April 2020 + ******************************************************************************/ +/* + * Copyright (c) 2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_PMU_ARMV8_H +#define ARM_PMU_ARMV8_H + +/** + * \brief PMU Events + * \note See the Armv8.1-M Architecture Reference Manual for full details on these PMU events. + * */ + +#define ARM_PMU_SW_INCR 0x0000 /*!< Software update to the PMU_SWINC register, architecturally executed and condition code check pass */ +#define ARM_PMU_L1I_CACHE_REFILL 0x0001 /*!< L1 I-Cache refill */ +#define ARM_PMU_L1D_CACHE_REFILL 0x0003 /*!< L1 D-Cache refill */ +#define ARM_PMU_L1D_CACHE 0x0004 /*!< L1 D-Cache access */ +#define ARM_PMU_LD_RETIRED 0x0006 /*!< Memory-reading instruction architecturally executed and condition code check pass */ +#define ARM_PMU_ST_RETIRED 0x0007 /*!< Memory-writing instruction architecturally executed and condition code check pass */ +#define ARM_PMU_INST_RETIRED 0x0008 /*!< Instruction architecturally executed */ +#define ARM_PMU_EXC_TAKEN 0x0009 /*!< Exception entry */ +#define ARM_PMU_EXC_RETURN 0x000A /*!< Exception return instruction architecturally executed and the condition code check pass */ +#define ARM_PMU_PC_WRITE_RETIRED 0x000C /*!< Software change to the Program Counter (PC). Instruction is architecturally executed and condition code check pass */ +#define ARM_PMU_BR_IMMED_RETIRED 0x000D /*!< Immediate branch architecturally executed */ +#define ARM_PMU_BR_RETURN_RETIRED 0x000E /*!< Function return instruction architecturally executed and the condition code check pass */ +#define ARM_PMU_UNALIGNED_LDST_RETIRED 0x000F /*!< Unaligned memory memory-reading or memory-writing instruction architecturally executed and condition code check pass */ +#define ARM_PMU_BR_MIS_PRED 0x0010 /*!< Mispredicted or not predicted branch speculatively executed */ +#define ARM_PMU_CPU_CYCLES 0x0011 /*!< Cycle */ +#define ARM_PMU_BR_PRED 0x0012 /*!< Predictable branch speculatively executed */ +#define ARM_PMU_MEM_ACCESS 0x0013 /*!< Data memory access */ +#define ARM_PMU_L1I_CACHE 0x0014 /*!< Level 1 instruction cache access */ +#define ARM_PMU_L1D_CACHE_WB 0x0015 /*!< Level 1 data cache write-back */ +#define ARM_PMU_L2D_CACHE 0x0016 /*!< Level 2 data cache access */ +#define ARM_PMU_L2D_CACHE_REFILL 0x0017 /*!< Level 2 data cache refill */ +#define ARM_PMU_L2D_CACHE_WB 0x0018 /*!< Level 2 data cache write-back */ +#define ARM_PMU_BUS_ACCESS 0x0019 /*!< Bus access */ +#define ARM_PMU_MEMORY_ERROR 0x001A /*!< Local memory error */ +#define ARM_PMU_INST_SPEC 0x001B /*!< Instruction speculatively executed */ +#define ARM_PMU_BUS_CYCLES 0x001D /*!< Bus cycles */ +#define ARM_PMU_CHAIN 0x001E /*!< For an odd numbered counter, increment when an overflow occurs on the preceding even-numbered counter on the same PE */ +#define ARM_PMU_L1D_CACHE_ALLOCATE 0x001F /*!< Level 1 data cache allocation without refill */ +#define ARM_PMU_L2D_CACHE_ALLOCATE 0x0020 /*!< Level 2 data cache allocation without refill */ +#define ARM_PMU_BR_RETIRED 0x0021 /*!< Branch instruction architecturally executed */ +#define ARM_PMU_BR_MIS_PRED_RETIRED 0x0022 /*!< Mispredicted branch instruction architecturally executed */ +#define ARM_PMU_STALL_FRONTEND 0x0023 /*!< No operation issued because of the frontend */ +#define ARM_PMU_STALL_BACKEND 0x0024 /*!< No operation issued because of the backend */ +#define ARM_PMU_L2I_CACHE 0x0027 /*!< Level 2 instruction cache access */ +#define ARM_PMU_L2I_CACHE_REFILL 0x0028 /*!< Level 2 instruction cache refill */ +#define ARM_PMU_L3D_CACHE_ALLOCATE 0x0029 /*!< Level 3 data cache allocation without refill */ +#define ARM_PMU_L3D_CACHE_REFILL 0x002A /*!< Level 3 data cache refill */ +#define ARM_PMU_L3D_CACHE 0x002B /*!< Level 3 data cache access */ +#define ARM_PMU_L3D_CACHE_WB 0x002C /*!< Level 3 data cache write-back */ +#define ARM_PMU_LL_CACHE_RD 0x0036 /*!< Last level data cache read */ +#define ARM_PMU_LL_CACHE_MISS_RD 0x0037 /*!< Last level data cache read miss */ +#define ARM_PMU_L1D_CACHE_MISS_RD 0x0039 /*!< Level 1 data cache read miss */ +#define ARM_PMU_OP_COMPLETE 0x003A /*!< Operation retired */ +#define ARM_PMU_OP_SPEC 0x003B /*!< Operation speculatively executed */ +#define ARM_PMU_STALL 0x003C /*!< Stall cycle for instruction or operation not sent for execution */ +#define ARM_PMU_STALL_OP_BACKEND 0x003D /*!< Stall cycle for instruction or operation not sent for execution due to pipeline backend */ +#define ARM_PMU_STALL_OP_FRONTEND 0x003E /*!< Stall cycle for instruction or operation not sent for execution due to pipeline frontend */ +#define ARM_PMU_STALL_OP 0x003F /*!< Instruction or operation slots not occupied each cycle */ +#define ARM_PMU_L1D_CACHE_RD 0x0040 /*!< Level 1 data cache read */ +#define ARM_PMU_LE_RETIRED 0x0100 /*!< Loop end instruction executed */ +#define ARM_PMU_LE_SPEC 0x0101 /*!< Loop end instruction speculatively executed */ +#define ARM_PMU_BF_RETIRED 0x0104 /*!< Branch future instruction architecturally executed and condition code check pass */ +#define ARM_PMU_BF_SPEC 0x0105 /*!< Branch future instruction speculatively executed and condition code check pass */ +#define ARM_PMU_LE_CANCEL 0x0108 /*!< Loop end instruction not taken */ +#define ARM_PMU_BF_CANCEL 0x0109 /*!< Branch future instruction not taken */ +#define ARM_PMU_SE_CALL_S 0x0114 /*!< Call to secure function, resulting in Security state change */ +#define ARM_PMU_SE_CALL_NS 0x0115 /*!< Call to non-secure function, resulting in Security state change */ +#define ARM_PMU_DWT_CMPMATCH0 0x0118 /*!< DWT comparator 0 match */ +#define ARM_PMU_DWT_CMPMATCH1 0x0119 /*!< DWT comparator 1 match */ +#define ARM_PMU_DWT_CMPMATCH2 0x011A /*!< DWT comparator 2 match */ +#define ARM_PMU_DWT_CMPMATCH3 0x011B /*!< DWT comparator 3 match */ +#define ARM_PMU_MVE_INST_RETIRED 0x0200 /*!< MVE instruction architecturally executed */ +#define ARM_PMU_MVE_INST_SPEC 0x0201 /*!< MVE instruction speculatively executed */ +#define ARM_PMU_MVE_FP_RETIRED 0x0204 /*!< MVE floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_SPEC 0x0205 /*!< MVE floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_HP_RETIRED 0x0208 /*!< MVE half-precision floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_HP_SPEC 0x0209 /*!< MVE half-precision floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_SP_RETIRED 0x020C /*!< MVE single-precision floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_SP_SPEC 0x020D /*!< MVE single-precision floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_MAC_RETIRED 0x0214 /*!< MVE floating-point multiply or multiply-accumulate instruction architecturally executed */ +#define ARM_PMU_MVE_FP_MAC_SPEC 0x0215 /*!< MVE floating-point multiply or multiply-accumulate instruction speculatively executed */ +#define ARM_PMU_MVE_INT_RETIRED 0x0224 /*!< MVE integer instruction architecturally executed */ +#define ARM_PMU_MVE_INT_SPEC 0x0225 /*!< MVE integer instruction speculatively executed */ +#define ARM_PMU_MVE_INT_MAC_RETIRED 0x0228 /*!< MVE multiply or multiply-accumulate instruction architecturally executed */ +#define ARM_PMU_MVE_INT_MAC_SPEC 0x0229 /*!< MVE multiply or multiply-accumulate instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_RETIRED 0x0238 /*!< MVE load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_SPEC 0x0239 /*!< MVE load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_RETIRED 0x023C /*!< MVE load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_SPEC 0x023D /*!< MVE load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_RETIRED 0x0240 /*!< MVE store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_SPEC 0x0241 /*!< MVE store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_CONTIG_RETIRED 0x0244 /*!< MVE contiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_CONTIG_SPEC 0x0245 /*!< MVE contiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_CONTIG_RETIRED 0x0248 /*!< MVE contiguous load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_CONTIG_SPEC 0x0249 /*!< MVE contiguous load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_CONTIG_RETIRED 0x024C /*!< MVE contiguous store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_CONTIG_SPEC 0x024D /*!< MVE contiguous store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_NONCONTIG_RETIRED 0x0250 /*!< MVE non-contiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_NONCONTIG_SPEC 0x0251 /*!< MVE non-contiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_NONCONTIG_RETIRED 0x0254 /*!< MVE non-contiguous load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_NONCONTIG_SPEC 0x0255 /*!< MVE non-contiguous load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_NONCONTIG_RETIRED 0x0258 /*!< MVE non-contiguous store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_NONCONTIG_SPEC 0x0259 /*!< MVE non-contiguous store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_MULTI_RETIRED 0x025C /*!< MVE memory instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_LDST_MULTI_SPEC 0x025D /*!< MVE memory instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_LD_MULTI_RETIRED 0x0260 /*!< MVE memory load instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_LD_MULTI_SPEC 0x0261 /*!< MVE memory load instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_ST_MULTI_RETIRED 0x0261 /*!< MVE memory store instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_ST_MULTI_SPEC 0x0265 /*!< MVE memory store instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_RETIRED 0x028C /*!< MVE unaligned memory load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_SPEC 0x028D /*!< MVE unaligned memory load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_UNALIGNED_RETIRED 0x0290 /*!< MVE unaligned load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_UNALIGNED_SPEC 0x0291 /*!< MVE unaligned load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_UNALIGNED_RETIRED 0x0294 /*!< MVE unaligned store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_UNALIGNED_SPEC 0x0295 /*!< MVE unaligned store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_NONCONTIG_RETIRED 0x0298 /*!< MVE unaligned noncontiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_NONCONTIG_SPEC 0x0299 /*!< MVE unaligned noncontiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_RETIRED 0x02A0 /*!< MVE vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_SPEC 0x02A1 /*!< MVE vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_FP_RETIRED 0x02A4 /*!< MVE floating-point vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_FP_SPEC 0x02A5 /*!< MVE floating-point vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_INT_RETIRED 0x02A8 /*!< MVE integer vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_INT_SPEC 0x02A9 /*!< MVE integer vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_PRED 0x02B8 /*!< Cycles where one or more predicated beats architecturally executed */ +#define ARM_PMU_MVE_STALL 0x02CC /*!< Stall cycles caused by an MVE instruction */ +#define ARM_PMU_MVE_STALL_RESOURCE 0x02CD /*!< Stall cycles caused by an MVE instruction because of resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_MEM 0x02CE /*!< Stall cycles caused by an MVE instruction because of memory resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_FP 0x02CF /*!< Stall cycles caused by an MVE instruction because of floating-point resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_INT 0x02D0 /*!< Stall cycles caused by an MVE instruction because of integer resource conflicts */ +#define ARM_PMU_MVE_STALL_BREAK 0x02D3 /*!< Stall cycles caused by an MVE chain break */ +#define ARM_PMU_MVE_STALL_DEPENDENCY 0x02D4 /*!< Stall cycles caused by MVE register dependency */ +#define ARM_PMU_ITCM_ACCESS 0x4007 /*!< Instruction TCM access */ +#define ARM_PMU_DTCM_ACCESS 0x4008 /*!< Data TCM access */ +#define ARM_PMU_TRCEXTOUT0 0x4010 /*!< ETM external output 0 */ +#define ARM_PMU_TRCEXTOUT1 0x4011 /*!< ETM external output 1 */ +#define ARM_PMU_TRCEXTOUT2 0x4012 /*!< ETM external output 2 */ +#define ARM_PMU_TRCEXTOUT3 0x4013 /*!< ETM external output 3 */ +#define ARM_PMU_CTI_TRIGOUT4 0x4018 /*!< Cross-trigger Interface output trigger 4 */ +#define ARM_PMU_CTI_TRIGOUT5 0x4019 /*!< Cross-trigger Interface output trigger 5 */ +#define ARM_PMU_CTI_TRIGOUT6 0x401A /*!< Cross-trigger Interface output trigger 6 */ +#define ARM_PMU_CTI_TRIGOUT7 0x401B /*!< Cross-trigger Interface output trigger 7 */ + +/** \brief PMU Functions */ + +__STATIC_INLINE void ARM_PMU_Enable(void); +__STATIC_INLINE void ARM_PMU_Disable(void); + +__STATIC_INLINE void ARM_PMU_Set_EVTYPER(uint32_t num, uint32_t type); + +__STATIC_INLINE void ARM_PMU_CYCCNT_Reset(void); +__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset(void); + +__STATIC_INLINE void ARM_PMU_CNTR_Enable(uint32_t mask); +__STATIC_INLINE void ARM_PMU_CNTR_Disable(uint32_t mask); + +__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR(void); +__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR(uint32_t num); + +__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS(void); +__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS(uint32_t mask); + +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable(uint32_t mask); +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable(uint32_t mask); + +__STATIC_INLINE void ARM_PMU_CNTR_Increment(uint32_t mask); + +/** + \brief Enable the PMU +*/ +__STATIC_INLINE void ARM_PMU_Enable(void) +{ + PMU->CTRL |= PMU_CTRL_ENABLE_Msk; +} + +/** + \brief Disable the PMU +*/ +__STATIC_INLINE void ARM_PMU_Disable(void) +{ + PMU->CTRL &= ~PMU_CTRL_ENABLE_Msk; +} + +/** + \brief Set event to count for PMU eventer counter + \param [in] num Event counter (0-30) to configure + \param [in] type Event to count +*/ +__STATIC_INLINE void ARM_PMU_Set_EVTYPER(uint32_t num, uint32_t type) +{ + PMU->EVTYPER[num] = type; +} + +/** + \brief Reset cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CYCCNT_Reset(void) +{ + PMU->CTRL |= PMU_CTRL_CYCCNT_RESET_Msk; +} + +/** + \brief Reset all event counters +*/ +__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset(void) +{ + PMU->CTRL |= PMU_CTRL_EVENTCNT_RESET_Msk; +} + +/** + \brief Enable counters + \param [in] mask Counters to enable + \note Enables one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Enable(uint32_t mask) +{ + PMU->CNTENSET = mask; +} + +/** + \brief Disable counters + \param [in] mask Counters to enable + \note Disables one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Disable(uint32_t mask) +{ + PMU->CNTENCLR = mask; +} + +/** + \brief Read cycle counter + \return Cycle count +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR(void) +{ + return PMU->CCNTR; +} + +/** + \brief Read event counter + \param [in] num Event counter (0-30) to read + \return Event count +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR(uint32_t num) +{ + return PMU_EVCNTR_CNT_Msk & PMU->EVCNTR[num]; +} + +/** + \brief Read counter overflow status + \return Counter overflow status bits for the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS(void) +{ + return PMU->OVSSET; +} + +/** + \brief Clear counter overflow status + \param [in] mask Counter overflow status bits to clear + \note Clears overflow status bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS(uint32_t mask) +{ + PMU->OVSCLR = mask; +} + +/** + \brief Enable counter overflow interrupt request + \param [in] mask Counter overflow interrupt request bits to set + \note Sets overflow interrupt request bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable(uint32_t mask) +{ + PMU->INTENSET = mask; +} + +/** + \brief Disable counter overflow interrupt request + \param [in] mask Counter overflow interrupt request bits to clear + \note Clears overflow interrupt request bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable(uint32_t mask) +{ + PMU->INTENCLR = mask; +} + +/** + \brief Software increment event counter + \param [in] mask Counters to increment + \note Software increment bits for one or more event counters (0-30) +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Increment(uint32_t mask) +{ + PMU->SWINC = mask; +} + +#endif diff --git a/armlib/at32_sys/cmsis/cm4/device_support/at32f435_437.h b/armlib/at32_sys/cmsis/cm4/device_support/at32f435_437.h new file mode 100644 index 000000000..d04e5efb4 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/device_support/at32f435_437.h @@ -0,0 +1,876 @@ +/** + ************************************************************************** + * @file at32f435_437.h + * @brief at32f435_437 header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#ifndef __AT32F435_437_H +#define __AT32F435_437_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined (__CC_ARM) + #pragma anon_unions +#endif + + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup AT32F435_437 + * @{ + */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * tip: to avoid modifying this file each time you need to switch between these + * devices, you can define the device in your toolchain compiler preprocessor. + */ + +#if !defined (AT32F435CCU7) && !defined (AT32F435CGU7) && !defined (AT32F435CMU7) && \ + !defined (AT32F435CCT7) && !defined (AT32F435CGT7) && !defined (AT32F435CMT7) && \ + !defined (AT32F435RCT7) && !defined (AT32F435RGT7) && !defined (AT32F435RMT7) && \ + !defined (AT32F435VCT7) && !defined (AT32F435VGT7) && !defined (AT32F435VMT7) && \ + !defined (AT32F435ZCT7) && !defined (AT32F435ZGT7) && !defined (AT32F435ZMT7) && \ + !defined (AT32F437RCT7) && !defined (AT32F437RGT7) && !defined (AT32F437RMT7) && \ + !defined (AT32F437VCT7) && !defined (AT32F437VGT7) && !defined (AT32F437VMT7) && \ + !defined (AT32F437ZCT7) && !defined (AT32F437ZGT7) && !defined (AT32F437ZMT7) && \ + !defined (AT32F435CDU7) && !defined (AT32F435CDT7) && !defined (AT32F435RDT7) && \ + !defined (AT32F435VDT7) && !defined (AT32F435ZDT7) && !defined (AT32F437RDT7) && \ + !defined (AT32F437VDT7) && !defined (AT32F437ZDT7) + + #error "Please select first the target device used in your application (in at32f435_437.h file)" +#endif + +#if defined (AT32F435CCU7) || defined (AT32F435CGU7) || defined (AT32F435CMU7) || \ + defined (AT32F435CCT7) || defined (AT32F435CGT7) || defined (AT32F435CMT7) || \ + defined (AT32F435RCT7) || defined (AT32F435RGT7) || defined (AT32F435RMT7) || \ + defined (AT32F435VCT7) || defined (AT32F435VGT7) || defined (AT32F435VMT7) || \ + defined (AT32F435ZCT7) || defined (AT32F435ZGT7) || defined (AT32F435ZMT7) || \ + defined (AT32F435CDU7) || defined (AT32F435CDT7) || defined (AT32F435RDT7) || \ + defined (AT32F435VDT7) || defined (AT32F435ZDT7) + + #define AT32F435xx +#endif + +#if defined (AT32F437RCT7) || defined (AT32F437RGT7) || defined (AT32F437RMT7) || \ + defined (AT32F437VCT7) || defined (AT32F437VGT7) || defined (AT32F437VMT7) || \ + defined (AT32F437ZCT7) || defined (AT32F437ZGT7) || defined (AT32F437ZMT7) || \ + defined (AT32F437RDT7) || defined (AT32F437VDT7) || defined (AT32F437ZDT7) + + #define AT32F437xx +#endif + +/** + * define with package + */ +#if defined (AT32F435ZCT7) || defined (AT32F435ZGT7) || defined (AT32F435ZMT7) || \ + defined (AT32F435ZDT7) + + #define AT32F435Zx +#endif + +#if defined (AT32F435VCT7) || defined (AT32F435VGT7) || defined (AT32F435VMT7) || \ + defined (AT32F435VDT7) + + #define AT32F435Vx +#endif + +#if defined (AT32F435RCT7) || defined (AT32F435RGT7) || defined (AT32F435RMT7) || \ + defined (AT32F435RDT7) + + #define AT32F435Rx +#endif + +#if defined (AT32F435CCU7) || defined (AT32F435CGU7) || defined (AT32F435CMU7) || \ + defined (AT32F435CCT7) || defined (AT32F435CGT7) || defined (AT32F435CMT7) || \ + defined (AT32F435CDU7) || defined (AT32F435CDT7) + + #define AT32F435Cx +#endif + +#if defined (AT32F437ZCT7) || defined (AT32F437ZGT7) || defined (AT32F437ZMT7) || \ + defined (AT32F437ZDT7) + + #define AT32F437Zx +#endif + +#if defined (AT32F437VCT7) || defined (AT32F437VGT7) || defined (AT32F437VMT7) || \ + defined (AT32F437VDT7) + + #define AT32F437Vx +#endif + +#if defined (AT32F437RCT7) || defined (AT32F437RGT7) || defined (AT32F437RMT7) || \ + defined (AT32F437RDT7) + + #define AT32F437Rx +#endif + +/** + * define with memory density + */ +#if defined (AT32F435CCU7) || defined (AT32F435CCT7) || defined (AT32F435RCT7) || \ + defined (AT32F435VCT7) || defined (AT32F435ZCT7) + + #define AT32F435xC +#endif + +#if defined (AT32F435CDU7) || defined (AT32F435CDT7) || defined (AT32F435RDT7) || \ + defined (AT32F435VDT7) || defined (AT32F435ZDT7) + + #define AT32F435xD +#endif + +#if defined (AT32F435CGU7) || defined (AT32F435CGT7) || defined (AT32F435RGT7) || \ + defined (AT32F435VGT7) || defined (AT32F435ZGT7) + + #define AT32F435xG +#endif + +#if defined (AT32F435CMU7) || defined (AT32F435CMT7) || defined (AT32F435RMT7) || \ + defined (AT32F435VMT7) || defined (AT32F435ZMT7) + + #define AT32F435xM +#endif + +#if defined (AT32F437RCT7) || defined (AT32F437VCT7) || defined (AT32F437ZCT7) + + #define AT32F437xC +#endif + +#if defined (AT32F437RDT7) || defined (AT32F437VDT7) || defined (AT32F437ZDT7) + + #define AT32F437xD +#endif + +#if defined (AT32F437RGT7) || defined (AT32F437VGT7) || defined (AT32F437ZGT7) + + #define AT32F437xG +#endif + +#if defined (AT32F437RMT7) || defined (AT32F437VMT7) || defined (AT32F437ZMT7) + + #define AT32F437xM +#endif + +#ifndef USE_STDPERIPH_DRIVER +/** + * @brief comment the line below if you will not use the peripherals drivers. + * in this case, these drivers will not be included and the application code will + * be based on direct access to peripherals registers + */ + #ifdef _RTE_ + #include "RTE_Components.h" + #ifdef RTE_DEVICE_STDPERIPH_FRAMEWORK + #define USE_STDPERIPH_DRIVER + #endif + #endif +#endif + +/** + * @brief at32f435_437 standard peripheral library version number + */ +#define __AT32F435_437_LIBRARY_VERSION_MAJOR (0x02) /*!< [31:24] major version */ +#define __AT32F435_437_LIBRARY_VERSION_MIDDLE (0x02) /*!< [23:16] middle version */ +#define __AT32F435_437_LIBRARY_VERSION_MINOR (0x02) /*!< [15:8] minor version */ +#define __AT32F435_437_LIBRARY_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __AT32F435_437_LIBRARY_VERSION ((__AT32F435_437_LIBRARY_VERSION_MAJOR << 24) | \ + (__AT32F435_437_LIBRARY_VERSION_MIDDLE << 16) | \ + (__AT32F435_437_LIBRARY_VERSION_MINOR << 8) | \ + (__AT32F435_437_LIBRARY_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup configuration_section_for_cmsis + * @{ + */ + +/** + * @brief configuration of the cortex-m4 processor and core peripherals + */ +#define __CM4_REV 0x0001U /*!< core revision r0p1 */ +#define __MPU_PRESENT 1 /*!< mpu present */ +#define __NVIC_PRIO_BITS 4 /*!< at32 uses 4 bits for the priority levels */ +#define __Vendor_SysTickConfig 0 /*!< set to 1 if different systick config is used */ +#define __FPU_PRESENT 1U /*!< fpu present */ + +/** + * @brief at32f435_437 interrupt number definition, according to the selected device + * in @ref library_configuration_section + */ +typedef enum IRQn +{ + /****** cortex-m4 processor exceptions numbers ***************************************************/ + Reset_IRQn = -15, /*!< 1 reset vector, invoked on power up and warm reset */ + NonMaskableInt_IRQn = -14, /*!< 2 non maskable interrupt */ + HardFault_IRQn = -13, /*!< 3 hard fault, all classes of fault */ + MemoryManagement_IRQn = -12, /*!< 4 cortex-m4 memory management interrupt */ + BusFault_IRQn = -11, /*!< 5 cortex-m4 bus fault interrupt */ + UsageFault_IRQn = -10, /*!< 6 cortex-m4 usage fault interrupt */ + SVCall_IRQn = -5, /*!< 11 cortex-m4 sv call interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 cortex-m4 debug monitor interrupt */ + PendSV_IRQn = -2, /*!< 14 cortex-m4 pend sv interrupt */ + SysTick_IRQn = -1, /*!< 15 cortex-m4 system tick interrupt */ + + /****** at32 specific interrupt numbers *********************************************************/ + WWDT_IRQn = 0, /*!< window watchdog timer interrupt */ + PVM_IRQn = 1, /*!< pvm through exint line detection interrupt */ + TAMP_STAMP_IRQn = 2, /*!< tamper and timestamp interrupts through the exint line */ + ERTC_WKUP_IRQn = 3, /*!< ertc wakeup through the exint line */ + FLASH_IRQn = 4, /*!< flash global interrupt */ + CRM_IRQn = 5, /*!< crm global interrupt */ + EXINT0_IRQn = 6, /*!< exint line0 interrupt */ + EXINT1_IRQn = 7, /*!< exint line1 interrupt */ + EXINT2_IRQn = 8, /*!< exint line2 interrupt */ + EXINT3_IRQn = 9, /*!< exint line3 interrupt */ + EXINT4_IRQn = 10, /*!< exint line4 interrupt */ + EDMA_Stream1_IRQn = 11, /*!< edma stream 1 global interrupt */ + EDMA_Stream2_IRQn = 12, /*!< edma stream 2 global interrupt */ + EDMA_Stream3_IRQn = 13, /*!< edma stream 3 global interrupt */ + EDMA_Stream4_IRQn = 14, /*!< edma stream 4 global interrupt */ + EDMA_Stream5_IRQn = 15, /*!< edma stream 5 global interrupt */ + EDMA_Stream6_IRQn = 16, /*!< edma stream 6 global interrupt */ + EDMA_Stream7_IRQn = 17, /*!< edma stream 7 global interrupt */ + +#if defined (AT32F435xx) + ADC1_2_3_IRQn = 18, /*!< adc1 adc2 and adc3 global interrupt */ + CAN1_TX_IRQn = 19, /*!< can1 tx interrupts */ + CAN1_RX0_IRQn = 20, /*!< can1 rx0 interrupts */ + CAN1_RX1_IRQn = 21, /*!< can1 rx1 interrupt */ + CAN1_SE_IRQn = 22, /*!< can1 se interrupt */ + EXINT9_5_IRQn = 23, /*!< external line[9:5] interrupts */ + TMR1_BRK_TMR9_IRQn = 24, /*!< tmr1 brake interrupt */ + TMR1_OVF_TMR10_IRQn = 25, /*!< tmr1 overflow interrupt */ + TMR1_TRG_HALL_TMR11_IRQn = 26, /*!< tmr1 trigger and hall interrupt */ + TMR1_CH_IRQn = 27, /*!< tmr1 channel interrupt */ + TMR2_GLOBAL_IRQn = 28, /*!< tmr2 global interrupt */ + TMR3_GLOBAL_IRQn = 29, /*!< tmr3 global interrupt */ + TMR4_GLOBAL_IRQn = 30, /*!< tmr4 global interrupt */ + I2C1_EVT_IRQn = 31, /*!< i2c1 event interrupt */ + I2C1_ERR_IRQn = 32, /*!< i2c1 error interrupt */ + I2C2_EVT_IRQn = 33, /*!< i2c2 event interrupt */ + I2C2_ERR_IRQn = 34, /*!< i2c2 error interrupt */ + SPI1_IRQn = 35, /*!< spi1 global interrupt */ + SPI2_I2S2EXT_IRQn = 36, /*!< spi2 global interrupt */ + USART1_IRQn = 37, /*!< usart1 global interrupt */ + USART2_IRQn = 38, /*!< usart2 global interrupt */ + USART3_IRQn = 39, /*!< usart3 global interrupt */ + EXINT15_10_IRQn = 40, /*!< external line[15:10] interrupts */ + ERTCAlarm_IRQn = 41, /*!< ertc alarm through exint line interrupt */ + OTGFS1_WKUP_IRQn = 42, /*!< otgfs1 wakeup from suspend through exint line interrupt */ + TMR8_BRK_TMR12_IRQn = 43, /*!< tmr8 brake interrupt */ + TMR8_OVF_TMR13_IRQn = 44, /*!< tmr8 overflow interrupt */ + TMR8_TRG_HALL_TMR14_IRQn = 45, /*!< tmr8 trigger and hall interrupt */ + TMR8_CH_IRQn = 46, /*!< tmr8 channel interrupt */ + EDMA_Stream8_IRQn = 47, /*!< edma stream 8 global interrupt */ + XMC_IRQn = 48, /*!< xmc global interrupt */ + SDIO1_IRQn = 49, /*!< sdio global interrupt */ + TMR5_GLOBAL_IRQn = 50, /*!< tmr5 global interrupt */ + SPI3_I2S3EXT_IRQn = 51, /*!< spi3 global interrupt */ + UART4_IRQn = 52, /*!< uart4 global interrupt */ + UART5_IRQn = 53, /*!< uart5 global interrupt */ + TMR6_DAC_GLOBAL_IRQn = 54, /*!< tmr6 and dac global interrupt */ + TMR7_GLOBAL_IRQn = 55, /*!< tmr7 global interrupt */ + DMA1_Channel1_IRQn = 56, /*!< dma1 channel 0 global interrupt */ + DMA1_Channel2_IRQn = 57, /*!< dma1 channel 1 global interrupt */ + DMA1_Channel3_IRQn = 58, /*!< dma1 channel 2 global interrupt */ + DMA1_Channel4_IRQn = 59, /*!< dma1 channel 3 global interrupt */ + DMA1_Channel5_IRQn = 60, /*!< dma1 channel 4 global interrupt */ + CAN2_TX_IRQn = 63, /*!< can2 tx interrupt */ + CAN2_RX0_IRQn = 64, /*!< can2 rx0 interrupt */ + CAN2_RX1_IRQn = 65, /*!< can2 rx1 interrupt */ + CAN2_SE_IRQn = 66, /*!< can2 se interrupt */ + OTGFS1_IRQn = 67, /*!< otgfs1 interrupt */ + DMA1_Channel6_IRQn = 68, /*!< dma1 channel 5 global interrupt */ + DMA1_Channel7_IRQn = 69, /*!< dma1 channel 6 global interrupt */ + USART6_IRQn = 71, /*!< usart6 interrupt */ + I2C3_EVT_IRQn = 72, /*!< i2c3 event interrupt */ + I2C3_ERR_IRQn = 73, /*!< i2c3 error interrupt */ + OTGFS2_WKUP_IRQn = 76, /*!< otgfs2 wakeup from suspend through exint line interrupt */ + OTGFS2_IRQn = 77, /*!< otgfs2 interrupt */ + DVP_IRQn = 78, /*!< dvp interrupt */ + FPU_IRQn = 81, /*!< fpu interrupt */ + UART7_IRQn = 82, /*!< uart7 interrupt */ + UART8_IRQn = 83, /*!< uart8 interrupt */ + SPI4_IRQn = 84, /*!< spi4 global interrupt */ + QSPI2_IRQn = 91, /*!< qspi2 global interrupt */ + QSPI1_IRQn = 92, /*!< qspi1 global interrupt */ + DMAMUX_IRQn = 94, /*!< dmamux global interrupt */ + SDIO2_IRQn = 102, /*!< sdio2 global interrupt */ + ACC_IRQn = 103, /*!< acc interrupt */ + TMR20_BRK_IRQn = 104, /*!< tmr20 brake interrupt */ + TMR20_OVF_IRQn = 105, /*!< tmr20 overflow interrupt */ + TMR20_TRG_HALL_IRQn = 106, /*!< tmr20 trigger and hall interrupt */ + TMR20_CH_IRQn = 107, /*!< tmr20 channel interrupt */ + DMA2_Channel1_IRQn = 108, /*!< dma2 channel 1 global interrupt */ + DMA2_Channel2_IRQn = 109, /*!< dma2 channel 2 global interrupt */ + DMA2_Channel3_IRQn = 110, /*!< dma2 channel 3 global interrupt */ + DMA2_Channel4_IRQn = 111, /*!< dma2 channel 4 global interrupt */ + DMA2_Channel5_IRQn = 112, /*!< dma2 channel 5 global interrupt */ + DMA2_Channel6_IRQn = 113, /*!< dma2 channel 6 global interrupt */ + DMA2_Channel7_IRQn = 114 /*!< dma2 channel 7 global interrupt */ +#endif + +#if defined (AT32F437xx) + ADC1_2_3_IRQn = 18, /*!< adc1 adc2 and adc3 global interrupt */ + CAN1_TX_IRQn = 19, /*!< can1 tx interrupts */ + CAN1_RX0_IRQn = 20, /*!< can1 rx0 interrupts */ + CAN1_RX1_IRQn = 21, /*!< can1 rx1 interrupt */ + CAN1_SE_IRQn = 22, /*!< can1 se interrupt */ + EXINT9_5_IRQn = 23, /*!< external line[9:5] interrupts */ + TMR1_BRK_TMR9_IRQn = 24, /*!< tmr1 brake interrupt */ + TMR1_OVF_TMR10_IRQn = 25, /*!< tmr1 overflow interrupt */ + TMR1_TRG_HALL_TMR11_IRQn = 26, /*!< tmr1 trigger and hall interrupt */ + TMR1_CH_IRQn = 27, /*!< tmr1 channel interrupt */ + TMR2_GLOBAL_IRQn = 28, /*!< tmr2 global interrupt */ + TMR3_GLOBAL_IRQn = 29, /*!< tmr3 global interrupt */ + TMR4_GLOBAL_IRQn = 30, /*!< tmr4 global interrupt */ + I2C1_EVT_IRQn = 31, /*!< i2c1 event interrupt */ + I2C1_ERR_IRQn = 32, /*!< i2c1 error interrupt */ + I2C2_EVT_IRQn = 33, /*!< i2c2 event interrupt */ + I2C2_ERR_IRQn = 34, /*!< i2c2 error interrupt */ + SPI1_IRQn = 35, /*!< spi1 global interrupt */ + SPI2_I2S2EXT_IRQn = 36, /*!< spi2 global interrupt */ + USART1_IRQn = 37, /*!< usart1 global interrupt */ + USART2_IRQn = 38, /*!< usart2 global interrupt */ + USART3_IRQn = 39, /*!< usart3 global interrupt */ + EXINT15_10_IRQn = 40, /*!< external line[15:10] interrupts */ + ERTCAlarm_IRQn = 41, /*!< ertc alarm through exint line interrupt */ + OTGFS1_WKUP_IRQn = 42, /*!< otgfs1 wakeup from suspend through exint line interrupt */ + TMR8_BRK_TMR12_IRQn = 43, /*!< tmr8 brake interrupt */ + TMR8_OVF_TMR13_IRQn = 44, /*!< tmr8 overflow interrupt */ + TMR8_TRG_HALL_TMR14_IRQn = 45, /*!< tmr8 trigger and hall interrupt */ + TMR8_CH_IRQn = 46, /*!< tmr8 channel interrupt */ + EDMA_Stream8_IRQn = 47, /*!< dma1 stream 8 global interrupt */ + XMC_IRQn = 48, /*!< xmc global interrupt */ + SDIO1_IRQn = 49, /*!< sdio global interrupt */ + TMR5_GLOBAL_IRQn = 50, /*!< tmr5 global interrupt */ + SPI3_I2S3EXT_IRQn = 51, /*!< spi3 global interrupt */ + UART4_IRQn = 52, /*!< uart4 global interrupt */ + UART5_IRQn = 53, /*!< uart5 global interrupt */ + TMR6_DAC_GLOBAL_IRQn = 54, /*!< tmr6 and dac global interrupt */ + TMR7_GLOBAL_IRQn = 55, /*!< tmr7 global interrupt */ + DMA1_Channel1_IRQn = 56, /*!< dma1 channel 0 global interrupt */ + DMA1_Channel2_IRQn = 57, /*!< dma1 channel 1 global interrupt */ + DMA1_Channel3_IRQn = 58, /*!< dma1 channel 2 global interrupt */ + DMA1_Channel4_IRQn = 59, /*!< dma1 channel 3 global interrupt */ + DMA1_Channel5_IRQn = 60, /*!< dma1 channel 4 global interrupt */ + EMAC_IRQn = 61, /*!< emac interrupt */ + EMAC_WKUP_IRQn = 62, /*!< emac wakeup interrupt */ + CAN2_TX_IRQn = 63, /*!< can2 tx interrupt */ + CAN2_RX0_IRQn = 64, /*!< can2 rx0 interrupt */ + CAN2_RX1_IRQn = 65, /*!< can2 rx1 interrupt */ + CAN2_SE_IRQn = 66, /*!< can2 se interrupt */ + OTGFS1_IRQn = 67, /*!< otgfs1 interrupt */ + DMA1_Channel6_IRQn = 68, /*!< dma1 channel 5 global interrupt */ + DMA1_Channel7_IRQn = 69, /*!< dma1 channel 6 global interrupt */ + USART6_IRQn = 71, /*!< usart6 interrupt */ + I2C3_EVT_IRQn = 72, /*!< i2c3 event interrupt */ + I2C3_ERR_IRQn = 73, /*!< i2c3 error interrupt */ + OTGFS2_WKUP_IRQn = 76, /*!< otgfs2 wakeup from suspend through exint line interrupt */ + OTGFS2_IRQn = 77, /*!< otgfs2 interrupt */ + DVP_IRQn = 78, /*!< dvp interrupt */ + FPU_IRQn = 81, /*!< fpu interrupt */ + UART7_IRQn = 82, /*!< uart7 interrupt */ + UART8_IRQn = 83, /*!< uart8 interrupt */ + SPI4_IRQn = 84, /*!< spi4 global interrupt */ + QSPI2_IRQn = 91, /*!< qspi2 global interrupt */ + QSPI1_IRQn = 92, /*!< qspi1 global interrupt */ + DMAMUX_IRQn = 94, /*!< dmamux global interrupt */ + SDIO2_IRQn = 102, /*!< sdio2 global interrupt */ + ACC_IRQn = 103, /*!< acc interrupt */ + TMR20_BRK_IRQn = 104, /*!< tmr20 brake interrupt */ + TMR20_OVF_IRQn = 105, /*!< tmr20 overflow interrupt */ + TMR20_TRG_HALL_IRQn = 106, /*!< tmr20 trigger and hall interrupt */ + TMR20_CH_IRQn = 107, /*!< tmr20 channel interrupt */ + DMA2_Channel1_IRQn = 108, /*!< dma2 channel 1 global interrupt */ + DMA2_Channel2_IRQn = 109, /*!< dma2 channel 2 global interrupt */ + DMA2_Channel3_IRQn = 110, /*!< dma2 channel 3 global interrupt */ + DMA2_Channel4_IRQn = 111, /*!< dma2 channel 4 global interrupt */ + DMA2_Channel5_IRQn = 112, /*!< dma2 channel 5 global interrupt */ + DMA2_Channel6_IRQn = 113, /*!< dma2 channel 6 global interrupt */ + DMA2_Channel7_IRQn = 114 /*!< dma2 channel 7 global interrupt */ +#endif + +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm4.h" +#include "system_at32f435_437.h" +#include + +/** @addtogroup Exported_types + * @{ + */ + +typedef int32_t INT32; +typedef int16_t INT16; +typedef int8_t INT8; +typedef uint32_t UINT32; +typedef uint16_t UINT16; +typedef uint8_t UINT8; + +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< read only */ +typedef const int16_t sc16; /*!< read only */ +typedef const int8_t sc8; /*!< read only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< read only */ +typedef __I int16_t vsc16; /*!< read only */ +typedef __I int8_t vsc8; /*!< read only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< read only */ +typedef const uint16_t uc16; /*!< read only */ +typedef const uint8_t uc8; /*!< read only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< read only */ +typedef __I uint16_t vuc16; /*!< read only */ +typedef __I uint8_t vuc8; /*!< read only */ + +typedef enum {RESET = 0, SET = !RESET} flag_status; +typedef enum {FALSE = 0, TRUE = !FALSE} confirm_state; +typedef enum {ERROR = 0, SUCCESS = !ERROR} error_status; + +/** + * @} + */ + +/** @addtogroup Exported_macro + * @{ + */ + +#define REG8(addr) *(volatile uint8_t *)(addr) +#define REG16(addr) *(volatile uint16_t *)(addr) +#define REG32(addr) *(volatile uint32_t *)(addr) + +#define MAKE_VALUE(reg_offset, bit_num) (((reg_offset) << 16) | (bit_num & 0x1f)) + +#define PERIPH_REG(periph_base, value) REG32((periph_base + (value >> 16))) +#define PERIPH_REG_BIT(value) (0x1u << (value & 0x1f)) + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +#define XMC_SDRAM_MEM_BASE ((uint32_t)0xC0000000) +#define QSPI2_MEM_BASE ((uint32_t)0xB0000000) +#define XMC_CARD_MEM_BASE ((uint32_t)0xA8000000) +#define QSPI2_REG_BASE ((uint32_t)0xA0002000) +#define QSPI1_REG_BASE ((uint32_t)0xA0001000) +#define XMC_REG_BASE ((uint32_t)0xA0000000) +#define XMC_BANK1_REG_BASE (XMC_REG_BASE + 0x0000) +#define XMC_BANK2_REG_BASE (XMC_REG_BASE + 0x0060) +#define XMC_BANK3_REG_BASE (XMC_REG_BASE + 0x0080) +#define XMC_BANK4_REG_BASE (XMC_REG_BASE + 0x00A0) +#define XMC_SDRAM_REG_BASE (XMC_REG_BASE + 0x0140) +#define QSPI1_MEM_BASE ((uint32_t)0x90000000) +#define XMC_MEM_BASE ((uint32_t)0x60000000) +#define PERIPH_BASE ((uint32_t)0x40000000) +#define SRAM_BB_BASE ((uint32_t)0x22000000) +#define PERIPH_BB_BASE ((uint32_t)0x42000000) +#define SRAM_BASE ((uint32_t)0x20000000) +#define USD_BASE ((uint32_t)0x1FFFC000) +#define FLASH_BASE ((uint32_t)0x08000000) + +#define DEBUG_BASE ((uint32_t)0xE0042000) + +#define APB1PERIPH_BASE (PERIPH_BASE) +#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) +#define AHBPERIPH1_BASE (PERIPH_BASE + 0x20000) +#define AHBPERIPH2_BASE (PERIPH_BASE + 0x10000000) + +#if defined (AT32F435xx) +/* apb1 bus base address */ +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define PWC_BASE (APB1PERIPH_BASE + 0x7000) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define WDT_BASE (APB1PERIPH_BASE + 0x3000) +#define WWDT_BASE (APB1PERIPH_BASE + 0x2C00) +#define ERTC_BASE (APB1PERIPH_BASE + 0x2800) +#define TMR14_BASE (APB1PERIPH_BASE + 0x2000) +#define TMR13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TMR12_BASE (APB1PERIPH_BASE + 0x1800) +#define TMR7_BASE (APB1PERIPH_BASE + 0x1400) +#define TMR6_BASE (APB1PERIPH_BASE + 0x1000) +#define TMR5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TMR4_BASE (APB1PERIPH_BASE + 0x0800) +#define TMR3_BASE (APB1PERIPH_BASE + 0x0400) +#define TMR2_BASE (APB1PERIPH_BASE + 0x0000) +/* apb2 bus base address */ +#define I2S2EXT_BASE (APB2PERIPH_BASE + 0x7800) +#define I2S3EXT_BASE (APB2PERIPH_BASE + 0x7C00) +#define ACC_BASE (APB2PERIPH_BASE + 0x7400) +#define TMR20_BASE (APB2PERIPH_BASE + 0x4C00) +#define TMR11_BASE (APB2PERIPH_BASE + 0x4800) +#define TMR10_BASE (APB2PERIPH_BASE + 0x4400) +#define TMR9_BASE (APB2PERIPH_BASE + 0x4000) +#define EXINT_BASE (APB2PERIPH_BASE + 0x3C00) +#define SCFG_BASE (APB2PERIPH_BASE + 0x3800) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200) +#define ADCCOM_BASE (APB2PERIPH_BASE + 0x2300) +#define USART6_BASE (APB2PERIPH_BASE + 0x1400) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000) +#define TMR8_BASE (APB2PERIPH_BASE + 0x0400) +#define TMR1_BASE (APB2PERIPH_BASE + 0x0000) +/* ahb bus base address */ +#define OTGFS2_BASE (AHBPERIPH1_BASE + 0x20000) +#define SDIO1_BASE (AHBPERIPH1_BASE + 0xC400) +#define GPIOH_BASE (AHBPERIPH1_BASE + 0x1C00) +#define GPIOG_BASE (AHBPERIPH1_BASE + 0x1800) +#define GPIOF_BASE (AHBPERIPH1_BASE + 0x1400) +#define GPIOE_BASE (AHBPERIPH1_BASE + 0x1000) +#define GPIOD_BASE (AHBPERIPH1_BASE + 0x0C00) +#define GPIOC_BASE (AHBPERIPH1_BASE + 0x0800) +#define GPIOB_BASE (AHBPERIPH1_BASE + 0x0400) +#define GPIOA_BASE (AHBPERIPH1_BASE + 0x0000) + +#define DMA1_BASE (AHBPERIPH1_BASE + 0x6400) +#define DMA1_CHANNEL1_BASE (DMA1_BASE + 0x0008) +#define DMA1_CHANNEL2_BASE (DMA1_BASE + 0x001C) +#define DMA1_CHANNEL3_BASE (DMA1_BASE + 0x0030) +#define DMA1_CHANNEL4_BASE (DMA1_BASE + 0x0044) +#define DMA1_CHANNEL5_BASE (DMA1_BASE + 0x0058) +#define DMA1_CHANNEL6_BASE (DMA1_BASE + 0x006C) +#define DMA1_CHANNEL7_BASE (DMA1_BASE + 0x0080) + +#define DMA1MUX_BASE (DMA1_BASE + 0x0104) +#define DMA1MUX_CHANNEL1_BASE (DMA1MUX_BASE) +#define DMA1MUX_CHANNEL2_BASE (DMA1MUX_BASE + 0x0004) +#define DMA1MUX_CHANNEL3_BASE (DMA1MUX_BASE + 0x0008) +#define DMA1MUX_CHANNEL4_BASE (DMA1MUX_BASE + 0x000C) +#define DMA1MUX_CHANNEL5_BASE (DMA1MUX_BASE + 0x0010) +#define DMA1MUX_CHANNEL6_BASE (DMA1MUX_BASE + 0x0014) +#define DMA1MUX_CHANNEL7_BASE (DMA1MUX_BASE + 0x0018) + +#define DMA1MUX_GENERATOR1_BASE (DMA1_BASE + 0x0120) +#define DMA1MUX_GENERATOR2_BASE (DMA1_BASE + 0x0124) +#define DMA1MUX_GENERATOR3_BASE (DMA1_BASE + 0x0128) +#define DMA1MUX_GENERATOR4_BASE (DMA1_BASE + 0x012C) + +#define DMA2_BASE (AHBPERIPH1_BASE + 0x6600) +#define DMA2_CHANNEL1_BASE (DMA2_BASE + 0x0008) +#define DMA2_CHANNEL2_BASE (DMA2_BASE + 0x001C) +#define DMA2_CHANNEL3_BASE (DMA2_BASE + 0x0030) +#define DMA2_CHANNEL4_BASE (DMA2_BASE + 0x0044) +#define DMA2_CHANNEL5_BASE (DMA2_BASE + 0x0058) +#define DMA2_CHANNEL6_BASE (DMA2_BASE + 0x006C) +#define DMA2_CHANNEL7_BASE (DMA2_BASE + 0x0080) + +#define DMA2MUX_BASE (DMA2_BASE + 0x0104) +#define DMA2MUX_CHANNEL1_BASE (DMA2MUX_BASE) +#define DMA2MUX_CHANNEL2_BASE (DMA2MUX_BASE + 0x0004) +#define DMA2MUX_CHANNEL3_BASE (DMA2MUX_BASE + 0x0008) +#define DMA2MUX_CHANNEL4_BASE (DMA2MUX_BASE + 0x000C) +#define DMA2MUX_CHANNEL5_BASE (DMA2MUX_BASE + 0x0010) +#define DMA2MUX_CHANNEL6_BASE (DMA2MUX_BASE + 0x0014) +#define DMA2MUX_CHANNEL7_BASE (DMA2MUX_BASE + 0x0018) + +#define DMA2MUX_GENERATOR1_BASE (DMA2_BASE + 0x0120) +#define DMA2MUX_GENERATOR2_BASE (DMA2_BASE + 0x0124) +#define DMA2MUX_GENERATOR3_BASE (DMA2_BASE + 0x0128) +#define DMA2MUX_GENERATOR4_BASE (DMA2_BASE + 0x012C) + +#define EDMA_BASE (AHBPERIPH1_BASE + 0x6000) +#define EDMA_STREAM1_BASE (EDMA_BASE + 0x0010) +#define EDMA_STREAM2_BASE (EDMA_BASE + 0x0028) +#define EDMA_STREAM3_BASE (EDMA_BASE + 0x0040) +#define EDMA_STREAM4_BASE (EDMA_BASE + 0x0058) +#define EDMA_STREAM5_BASE (EDMA_BASE + 0x0070) +#define EDMA_STREAM6_BASE (EDMA_BASE + 0x0088) +#define EDMA_STREAM7_BASE (EDMA_BASE + 0x00A0) +#define EDMA_STREAM8_BASE (EDMA_BASE + 0x00B8) + +#define EDMA_2D_BASE (EDMA_BASE + 0x00F4) +#define EDMA_STREAM1_2D_BASE (EDMA_2D_BASE + 0x0004) +#define EDMA_STREAM2_2D_BASE (EDMA_2D_BASE + 0x000C) +#define EDMA_STREAM3_2D_BASE (EDMA_2D_BASE + 0x0014) +#define EDMA_STREAM4_2D_BASE (EDMA_2D_BASE + 0x001C) +#define EDMA_STREAM5_2D_BASE (EDMA_2D_BASE + 0x0024) +#define EDMA_STREAM6_2D_BASE (EDMA_2D_BASE + 0x002C) +#define EDMA_STREAM7_2D_BASE (EDMA_2D_BASE + 0x0034) +#define EDMA_STREAM8_2D_BASE (EDMA_2D_BASE + 0x003C) + +#define EDMA_LL_BASE (EDMA_BASE + 0x00D0) +#define EDMA_STREAM1_LL_BASE (EDMA_LL_BASE + 0x0004) +#define EDMA_STREAM2_LL_BASE (EDMA_LL_BASE + 0x0008) +#define EDMA_STREAM3_LL_BASE (EDMA_LL_BASE + 0x000C) +#define EDMA_STREAM4_LL_BASE (EDMA_LL_BASE + 0x0010) +#define EDMA_STREAM5_LL_BASE (EDMA_LL_BASE + 0x0014) +#define EDMA_STREAM6_LL_BASE (EDMA_LL_BASE + 0x0018) +#define EDMA_STREAM7_LL_BASE (EDMA_LL_BASE + 0x001C) +#define EDMA_STREAM8_LL_BASE (EDMA_LL_BASE + 0x0020) + +#define EDMAMUX_BASE (EDMA_BASE + 0x0140) +#define EDMAMUX_CHANNEL1_BASE (EDMAMUX_BASE) +#define EDMAMUX_CHANNEL2_BASE (EDMAMUX_BASE + 0x0004) +#define EDMAMUX_CHANNEL3_BASE (EDMAMUX_BASE + 0x0008) +#define EDMAMUX_CHANNEL4_BASE (EDMAMUX_BASE + 0x000C) +#define EDMAMUX_CHANNEL5_BASE (EDMAMUX_BASE + 0x0010) +#define EDMAMUX_CHANNEL6_BASE (EDMAMUX_BASE + 0x0014) +#define EDMAMUX_CHANNEL7_BASE (EDMAMUX_BASE + 0x0018) +#define EDMAMUX_CHANNEL8_BASE (EDMAMUX_BASE + 0x001C) + +#define EDMAMUX_GENERATOR1_BASE (EDMA_BASE + 0x0160) +#define EDMAMUX_GENERATOR2_BASE (EDMA_BASE + 0x0164) +#define EDMAMUX_GENERATOR3_BASE (EDMA_BASE + 0x0168) +#define EDMAMUX_GENERATOR4_BASE (EDMA_BASE + 0x016C) + +#define FLASH_REG_BASE (AHBPERIPH1_BASE + 0x3C00) +#define CRM_BASE (AHBPERIPH1_BASE + 0x3800) +#define CRC_BASE (AHBPERIPH1_BASE + 0x3000) +#define SDIO2_BASE (AHBPERIPH2_BASE + 0x61000) +#define DVP_BASE (AHBPERIPH2_BASE + 0x50000) +#define OTGFS1_BASE (AHBPERIPH2_BASE + 0x00000) +#endif + +#if defined (AT32F437xx) +/* apb1 bus base address */ +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define PWC_BASE (APB1PERIPH_BASE + 0x7000) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define WDT_BASE (APB1PERIPH_BASE + 0x3000) +#define WWDT_BASE (APB1PERIPH_BASE + 0x2C00) +#define ERTC_BASE (APB1PERIPH_BASE + 0x2800) +#define TMR14_BASE (APB1PERIPH_BASE + 0x2000) +#define TMR13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TMR12_BASE (APB1PERIPH_BASE + 0x1800) +#define TMR7_BASE (APB1PERIPH_BASE + 0x1400) +#define TMR6_BASE (APB1PERIPH_BASE + 0x1000) +#define TMR5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TMR4_BASE (APB1PERIPH_BASE + 0x0800) +#define TMR3_BASE (APB1PERIPH_BASE + 0x0400) +#define TMR2_BASE (APB1PERIPH_BASE + 0x0000) +/* apb2 bus base address */ +#define I2S2EXT_BASE (APB2PERIPH_BASE + 0x7800) +#define I2S3EXT_BASE (APB2PERIPH_BASE + 0x7C00) +#define ACC_BASE (APB2PERIPH_BASE + 0x7400) +#define TMR20_BASE (APB2PERIPH_BASE + 0x4C00) +#define TMR11_BASE (APB2PERIPH_BASE + 0x4800) +#define TMR10_BASE (APB2PERIPH_BASE + 0x4400) +#define TMR9_BASE (APB2PERIPH_BASE + 0x4000) +#define EXINT_BASE (APB2PERIPH_BASE + 0x3C00) +#define SCFG_BASE (APB2PERIPH_BASE + 0x3800) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200) +#define ADCCOM_BASE (APB2PERIPH_BASE + 0x2300) +#define USART6_BASE (APB2PERIPH_BASE + 0x1400) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000) +#define TMR8_BASE (APB2PERIPH_BASE + 0x0400) +#define TMR1_BASE (APB2PERIPH_BASE + 0x0000) +/* ahb bus base address */ +#define OTGFS2_BASE (AHBPERIPH1_BASE + 0x20000) +#define SDIO1_BASE (AHBPERIPH1_BASE + 0xC400) +#define EMAC_BASE (AHBPERIPH1_BASE + 0x8000) +#define GPIOH_BASE (AHBPERIPH1_BASE + 0x1C00) +#define GPIOG_BASE (AHBPERIPH1_BASE + 0x1800) +#define GPIOF_BASE (AHBPERIPH1_BASE + 0x1400) +#define GPIOE_BASE (AHBPERIPH1_BASE + 0x1000) +#define GPIOD_BASE (AHBPERIPH1_BASE + 0x0C00) +#define GPIOC_BASE (AHBPERIPH1_BASE + 0x0800) +#define GPIOB_BASE (AHBPERIPH1_BASE + 0x0400) +#define GPIOA_BASE (AHBPERIPH1_BASE + 0x0000) + +#define DMA1_BASE (AHBPERIPH1_BASE + 0x6400) +#define DMA1_CHANNEL1_BASE (DMA1_BASE + 0x0008) +#define DMA1_CHANNEL2_BASE (DMA1_BASE + 0x001C) +#define DMA1_CHANNEL3_BASE (DMA1_BASE + 0x0030) +#define DMA1_CHANNEL4_BASE (DMA1_BASE + 0x0044) +#define DMA1_CHANNEL5_BASE (DMA1_BASE + 0x0058) +#define DMA1_CHANNEL6_BASE (DMA1_BASE + 0x006C) +#define DMA1_CHANNEL7_BASE (DMA1_BASE + 0x0080) + +#define DMA1MUX_BASE (DMA1_BASE + 0x0104) +#define DMA1MUX_CHANNEL1_BASE (DMA1MUX_BASE) +#define DMA1MUX_CHANNEL2_BASE (DMA1MUX_BASE + 0x0004) +#define DMA1MUX_CHANNEL3_BASE (DMA1MUX_BASE + 0x0008) +#define DMA1MUX_CHANNEL4_BASE (DMA1MUX_BASE + 0x000C) +#define DMA1MUX_CHANNEL5_BASE (DMA1MUX_BASE + 0x0010) +#define DMA1MUX_CHANNEL6_BASE (DMA1MUX_BASE + 0x0014) +#define DMA1MUX_CHANNEL7_BASE (DMA1MUX_BASE + 0x0018) + +#define DMA1MUX_GENERATOR1_BASE (DMA1_BASE + 0x0120) +#define DMA1MUX_GENERATOR2_BASE (DMA1_BASE + 0x0124) +#define DMA1MUX_GENERATOR3_BASE (DMA1_BASE + 0x0128) +#define DMA1MUX_GENERATOR4_BASE (DMA1_BASE + 0x012C) + +#define DMA2_BASE (AHBPERIPH1_BASE + 0x6600) +#define DMA2_CHANNEL1_BASE (DMA2_BASE + 0x0008) +#define DMA2_CHANNEL2_BASE (DMA2_BASE + 0x001C) +#define DMA2_CHANNEL3_BASE (DMA2_BASE + 0x0030) +#define DMA2_CHANNEL4_BASE (DMA2_BASE + 0x0044) +#define DMA2_CHANNEL5_BASE (DMA2_BASE + 0x0058) +#define DMA2_CHANNEL6_BASE (DMA2_BASE + 0x006C) +#define DMA2_CHANNEL7_BASE (DMA2_BASE + 0x0080) + +#define DMA2MUX_BASE (DMA2_BASE + 0x0104) +#define DMA2MUX_CHANNEL1_BASE (DMA2MUX_BASE) +#define DMA2MUX_CHANNEL2_BASE (DMA2MUX_BASE + 0x0004) +#define DMA2MUX_CHANNEL3_BASE (DMA2MUX_BASE + 0x0008) +#define DMA2MUX_CHANNEL4_BASE (DMA2MUX_BASE + 0x000C) +#define DMA2MUX_CHANNEL5_BASE (DMA2MUX_BASE + 0x0010) +#define DMA2MUX_CHANNEL6_BASE (DMA2MUX_BASE + 0x0014) +#define DMA2MUX_CHANNEL7_BASE (DMA2MUX_BASE + 0x0018) + +#define DMA2MUX_GENERATOR1_BASE (DMA2_BASE + 0x0120) +#define DMA2MUX_GENERATOR2_BASE (DMA2_BASE + 0x0124) +#define DMA2MUX_GENERATOR3_BASE (DMA2_BASE + 0x0128) +#define DMA2MUX_GENERATOR4_BASE (DMA2_BASE + 0x012C) + +#define EDMA_BASE (AHBPERIPH1_BASE + 0x6000) +#define EDMA_STREAM1_BASE (EDMA_BASE + 0x0010) +#define EDMA_STREAM2_BASE (EDMA_BASE + 0x0028) +#define EDMA_STREAM3_BASE (EDMA_BASE + 0x0040) +#define EDMA_STREAM4_BASE (EDMA_BASE + 0x0058) +#define EDMA_STREAM5_BASE (EDMA_BASE + 0x0070) +#define EDMA_STREAM6_BASE (EDMA_BASE + 0x0088) +#define EDMA_STREAM7_BASE (EDMA_BASE + 0x00A0) +#define EDMA_STREAM8_BASE (EDMA_BASE + 0x00B8) + +#define EDMA_2D_BASE (EDMA_BASE + 0x00F4) +#define EDMA_STREAM1_2D_BASE (EDMA_2D_BASE + 0x0004) +#define EDMA_STREAM2_2D_BASE (EDMA_2D_BASE + 0x000C) +#define EDMA_STREAM3_2D_BASE (EDMA_2D_BASE + 0x0014) +#define EDMA_STREAM4_2D_BASE (EDMA_2D_BASE + 0x001C) +#define EDMA_STREAM5_2D_BASE (EDMA_2D_BASE + 0x0024) +#define EDMA_STREAM6_2D_BASE (EDMA_2D_BASE + 0x002C) +#define EDMA_STREAM7_2D_BASE (EDMA_2D_BASE + 0x0034) +#define EDMA_STREAM8_2D_BASE (EDMA_2D_BASE + 0x003C) + +#define EDMA_LL_BASE (EDMA_BASE + 0x00D0) +#define EDMA_STREAM1_LL_BASE (EDMA_LL_BASE + 0x0004) +#define EDMA_STREAM2_LL_BASE (EDMA_LL_BASE + 0x0008) +#define EDMA_STREAM3_LL_BASE (EDMA_LL_BASE + 0x000C) +#define EDMA_STREAM4_LL_BASE (EDMA_LL_BASE + 0x0010) +#define EDMA_STREAM5_LL_BASE (EDMA_LL_BASE + 0x0014) +#define EDMA_STREAM6_LL_BASE (EDMA_LL_BASE + 0x0018) +#define EDMA_STREAM7_LL_BASE (EDMA_LL_BASE + 0x001C) +#define EDMA_STREAM8_LL_BASE (EDMA_LL_BASE + 0x0020) + +#define EDMAMUX_BASE (EDMA_BASE + 0x0140) +#define EDMAMUX_CHANNEL1_BASE (EDMAMUX_BASE) +#define EDMAMUX_CHANNEL2_BASE (EDMAMUX_BASE + 0x0004) +#define EDMAMUX_CHANNEL3_BASE (EDMAMUX_BASE + 0x0008) +#define EDMAMUX_CHANNEL4_BASE (EDMAMUX_BASE + 0x000C) +#define EDMAMUX_CHANNEL5_BASE (EDMAMUX_BASE + 0x0010) +#define EDMAMUX_CHANNEL6_BASE (EDMAMUX_BASE + 0x0014) +#define EDMAMUX_CHANNEL7_BASE (EDMAMUX_BASE + 0x0018) +#define EDMAMUX_CHANNEL8_BASE (EDMAMUX_BASE + 0x001C) + +#define EDMAMUX_GENERATOR1_BASE (EDMA_BASE + 0x0160) +#define EDMAMUX_GENERATOR2_BASE (EDMA_BASE + 0x0164) +#define EDMAMUX_GENERATOR3_BASE (EDMA_BASE + 0x0168) +#define EDMAMUX_GENERATOR4_BASE (EDMA_BASE + 0x016C) + +#define FLASH_REG_BASE (AHBPERIPH1_BASE + 0x3C00) +#define CRM_BASE (AHBPERIPH1_BASE + 0x3800) +#define CRC_BASE (AHBPERIPH1_BASE + 0x3000) +#define SDIO2_BASE (AHBPERIPH2_BASE + 0x61000) +#define DVP_BASE (AHBPERIPH2_BASE + 0x50000) +#define OTGFS1_BASE (AHBPERIPH2_BASE + 0x00000) + +#define EMAC_MAC_BASE (EMAC_BASE) +#define EMAC_MMC_BASE (EMAC_BASE + 0x0100) +#define EMAC_PTP_BASE (EMAC_BASE + 0x0700) +#define EMAC_DMA_BASE (EMAC_BASE + 0x1000) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#include "at32f435_437_def.h" +#include "at32f435_437_conf.h" + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/cmsis/cm4/device_support/startup/gcc/startup_at32f435_437.s b/armlib/at32_sys/cmsis/cm4/device_support/startup/gcc/startup_at32f435_437.s new file mode 100644 index 000000000..40d5ce1d4 --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/device_support/startup/gcc/startup_at32f435_437.s @@ -0,0 +1,526 @@ +/** + ****************************************************************************** + * @file startup_at32f435_437.s + * @brief at32f435_437 devices vector table for gcc toolchain. + * this module performs: + * - set the initial sp + * - set the initial pc == reset_handler, + * - set the vector table entries with the exceptions isr address + * - configure the clock system and the external sram to + * be used as data memory (optional, to be enabled by user) + * - branches to Vector in the c library (which eventually + * calls Vector()). + * after reset the cortex-m4 processor is in thread mode, + * priority is privileged, and the stack is set to Vector. + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied Vector() routine is called. + * @param None + * @retval None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call the application's entry point.*/ + bl Vector + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _stack_end + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDT_IRQHandler /* Window Watchdog Timer */ + .word PVM_IRQHandler /* PVM through EXINT Line detect */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXINT line */ + .word ERTC_WKUP_IRQHandler /* ERTC Wakeup through the EXINT line */ + .word FLASH_IRQHandler /* Flash */ + .word CRM_IRQHandler /* CRM */ + .word EXINT0_IRQHandler /* EXINT Line 0 */ + .word EXINT1_IRQHandler /* EXINT Line 1 */ + .word EXINT2_IRQHandler /* EXINT Line 2 */ + .word EXINT3_IRQHandler /* EXINT Line 3 */ + .word EXINT4_IRQHandler /* EXINT Line 4 */ + .word EDMA_Stream1_IRQHandler /* EDMA Stream 1 */ + .word EDMA_Stream2_IRQHandler /* EDMA Stream 2 */ + .word EDMA_Stream3_IRQHandler /* EDMA Stream 3 */ + .word EDMA_Stream4_IRQHandler /* EDMA Stream 4 */ + .word EDMA_Stream5_IRQHandler /* EDMA Stream 5 */ + .word EDMA_Stream6_IRQHandler /* EDMA Stream 6 */ + .word EDMA_Stream7_IRQHandler /* EDMA Stream 7 */ + .word ADC1_2_3_IRQHandler /* ADC1 & ADC2 & ADC3 */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SE_IRQHandler /* CAN1 SE */ + .word EXINT9_5_IRQHandler /* EXINT Line [9:5] */ + .word TMR1_BRK_TMR9_IRQHandler /* TMR1 Brake and TMR9 */ + .word TMR1_OVF_TMR10_IRQHandler /* TMR1 Overflow and TMR10 */ + .word TMR1_TRG_HALL_TMR11_IRQHandler /* TMR1 Trigger and hall and TMR11 */ + .word TMR1_CH_IRQHandler /* TMR1 Channel */ + .word TMR2_GLOBAL_IRQHandler /* TMR2 */ + .word TMR3_GLOBAL_IRQHandler /* TMR3 */ + .word TMR4_GLOBAL_IRQHandler /* TMR4 */ + .word I2C1_EVT_IRQHandler /* I2C1 Event */ + .word I2C1_ERR_IRQHandler /* I2C1 Error */ + .word I2C2_EVT_IRQHandler /* I2C2 Event */ + .word I2C2_ERR_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_I2S2EXT_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXINT15_10_IRQHandler /* EXINT Line [15:10] */ + .word ERTCAlarm_IRQHandler /* RTC Alarm through EXINT Line */ + .word OTGFS1_WKUP_IRQHandler /* OTGFS1 Wakeup from suspend */ + .word TMR8_BRK_TMR12_IRQHandler /* TMR8 Brake and TMR12 */ + .word TMR8_OVF_TMR13_IRQHandler /* TMR8 Overflow and TMR13 */ + .word TMR8_TRG_HALL_TMR14_IRQHandler /* TMR8 Trigger and hall and TMR14 */ + .word TMR8_CH_IRQHandler /* TMR8 Channel */ + .word EDMA_Stream8_IRQHandler /* EDMA Stream 8 */ + .word XMC_IRQHandler /* XMC */ + .word SDIO1_IRQHandler /* SDIO1 */ + .word TMR5_GLOBAL_IRQHandler /* TMR5 */ + .word SPI3_I2S3EXT_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TMR6_DAC_GLOBAL_IRQHandler /* TMR6 & DAC */ + .word TMR7_GLOBAL_IRQHandler /* TMR7 */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_IRQHandler /* DMA1 Channel 2 */ + .word DMA1_Channel3_IRQHandler /* DMA1 Channel 3 */ + .word DMA1_Channel4_IRQHandler /* DMA1 Channel 4 */ + .word DMA1_Channel5_IRQHandler /* DMA1 Channel 5 */ + .word EMAC_IRQHandler /* EMAC */ + .word EMAC_WKUP_IRQHandler /* EMAC Wakeup */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SE_IRQHandler /* CAN2 SE */ + .word OTGFS1_IRQHandler /* OTGFS1 */ + .word DMA1_Channel6_IRQHandler /* DMA1 Channel 6 */ + .word DMA1_Channel7_IRQHandler /* DMA1 Channel 7 */ + .word 0 /* Reserved */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EVT_IRQHandler /* I2C3 Event */ + .word I2C3_ERR_IRQHandler /* I2C3 Error */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word OTGFS2_WKUP_IRQHandler /* OTGFS2 Wakeup from suspend */ + .word OTGFS2_IRQHandler /* OTGFS2 */ + .word DVP_IRQHandler /* DVP */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word QSPI2_IRQHandler /* QSPI2 */ + .word QSPI1_IRQHandler /* QSPI1 */ + .word 0 /* Reserved */ + .word DMAMUX_IRQHandler /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word SDIO2_IRQHandler /* SDIO2 */ + .word ACC_IRQHandler /* ACC */ + .word TMR20_BRK_IRQHandler /* TMR20 Brake */ + .word TMR20_OVF_IRQHandler /* TMR20 Overflow */ + .word TMR20_TRG_HALL_IRQHandler /* TMR20 Trigger and hall */ + .word TMR20_CH_IRQHandler /* TMR20 Channel */ + .word DMA2_Channel1_IRQHandler /* DMA2 Channel 1 */ + .word DMA2_Channel2_IRQHandler /* DMA2 Channel 2 */ + .word DMA2_Channel3_IRQHandler /* DMA2 Channel 3 */ + .word DMA2_Channel4_IRQHandler /* DMA2 Channel 4 */ + .word DMA2_Channel5_IRQHandler /* DMA2 Channel 5 */ + .word DMA2_Channel6_IRQHandler /* DMA2 Channel 6 */ + .word DMA2_Channel7_IRQHandler /* DMA2 Channel 7 */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDT_IRQHandler + .thumb_set WWDT_IRQHandler,Default_Handler + + .weak PVM_IRQHandler + .thumb_set PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak ERTC_WKUP_IRQHandler + .thumb_set ERTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak CRM_IRQHandler + .thumb_set CRM_IRQHandler,Default_Handler + + .weak EXINT0_IRQHandler + .thumb_set EXINT0_IRQHandler,Default_Handler + + .weak EXINT1_IRQHandler + .thumb_set EXINT1_IRQHandler,Default_Handler + + .weak EXINT2_IRQHandler + .thumb_set EXINT2_IRQHandler,Default_Handler + + .weak EXINT3_IRQHandler + .thumb_set EXINT3_IRQHandler,Default_Handler + + .weak EXINT4_IRQHandler + .thumb_set EXINT4_IRQHandler,Default_Handler + + .weak EDMA_Stream1_IRQHandler + .thumb_set EDMA_Stream1_IRQHandler,Default_Handler + + .weak EDMA_Stream2_IRQHandler + .thumb_set EDMA_Stream2_IRQHandler,Default_Handler + + .weak EDMA_Stream3_IRQHandler + .thumb_set EDMA_Stream3_IRQHandler,Default_Handler + + .weak EDMA_Stream4_IRQHandler + .thumb_set EDMA_Stream4_IRQHandler,Default_Handler + + .weak EDMA_Stream5_IRQHandler + .thumb_set EDMA_Stream5_IRQHandler,Default_Handler + + .weak EDMA_Stream6_IRQHandler + .thumb_set EDMA_Stream6_IRQHandler,Default_Handler + + .weak EDMA_Stream7_IRQHandler + .thumb_set EDMA_Stream7_IRQHandler,Default_Handler + + .weak ADC1_2_3_IRQHandler + .thumb_set ADC1_2_3_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SE_IRQHandler + .thumb_set CAN1_SE_IRQHandler,Default_Handler + + .weak EXINT9_5_IRQHandler + .thumb_set EXINT9_5_IRQHandler,Default_Handler + + .weak TMR1_BRK_TMR9_IRQHandler + .thumb_set TMR1_BRK_TMR9_IRQHandler,Default_Handler + + .weak TMR1_OVF_TMR10_IRQHandler + .thumb_set TMR1_OVF_TMR10_IRQHandler,Default_Handler + + .weak TMR1_TRG_HALL_TMR11_IRQHandler + .thumb_set TMR1_TRG_HALL_TMR11_IRQHandler,Default_Handler + + .weak TMR1_CH_IRQHandler + .thumb_set TMR1_CH_IRQHandler,Default_Handler + + .weak TMR2_GLOBAL_IRQHandler + .thumb_set TMR2_GLOBAL_IRQHandler,Default_Handler + + .weak TMR3_GLOBAL_IRQHandler + .thumb_set TMR3_GLOBAL_IRQHandler,Default_Handler + + .weak TMR4_GLOBAL_IRQHandler + .thumb_set TMR4_GLOBAL_IRQHandler,Default_Handler + + .weak I2C1_EVT_IRQHandler + .thumb_set I2C1_EVT_IRQHandler,Default_Handler + + .weak I2C1_ERR_IRQHandler + .thumb_set I2C1_ERR_IRQHandler,Default_Handler + + .weak I2C2_EVT_IRQHandler + .thumb_set I2C2_EVT_IRQHandler,Default_Handler + + .weak I2C2_ERR_IRQHandler + .thumb_set I2C2_ERR_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_I2S2EXT_IRQHandler + .thumb_set SPI2_I2S2EXT_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXINT15_10_IRQHandler + .thumb_set EXINT15_10_IRQHandler,Default_Handler + + .weak ERTCAlarm_IRQHandler + .thumb_set ERTCAlarm_IRQHandler,Default_Handler + + .weak OTGFS1_WKUP_IRQHandler + .thumb_set OTGFS1_WKUP_IRQHandler,Default_Handler + + .weak TMR8_BRK_TMR12_IRQHandler + .thumb_set TMR8_BRK_TMR12_IRQHandler,Default_Handler + + .weak TMR8_OVF_TMR13_IRQHandler + .thumb_set TMR8_OVF_TMR13_IRQHandler,Default_Handler + + .weak TMR8_TRG_HALL_TMR14_IRQHandler + .thumb_set TMR8_TRG_HALL_TMR14_IRQHandler,Default_Handler + + .weak TMR8_CH_IRQHandler + .thumb_set TMR8_CH_IRQHandler,Default_Handler + + .weak EDMA_Stream8_IRQHandler + .thumb_set EDMA_Stream8_IRQHandler,Default_Handler + + .weak XMC_IRQHandler + .thumb_set XMC_IRQHandler,Default_Handler + + .weak SDIO1_IRQHandler + .thumb_set SDIO1_IRQHandler,Default_Handler + + .weak TMR5_GLOBAL_IRQHandler + .thumb_set TMR5_GLOBAL_IRQHandler,Default_Handler + + .weak SPI3_I2S3EXT_IRQHandler + .thumb_set SPI3_I2S3EXT_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TMR6_DAC_GLOBAL_IRQHandler + .thumb_set TMR6_DAC_GLOBAL_IRQHandler,Default_Handler + + .weak TMR7_GLOBAL_IRQHandler + .thumb_set TMR7_GLOBAL_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak EMAC_IRQHandler + .thumb_set EMAC_IRQHandler,Default_Handler + + .weak EMAC_WKUP_IRQHandler + .thumb_set EMAC_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler ,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler ,Default_Handler + + .weak CAN2_SE_IRQHandler + .thumb_set CAN2_SE_IRQHandler,Default_Handler + + .weak OTGFS1_IRQHandler + .thumb_set OTGFS1_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EVT_IRQHandler + .thumb_set I2C3_EVT_IRQHandler,Default_Handler + + .weak I2C3_ERR_IRQHandler + .thumb_set I2C3_ERR_IRQHandler,Default_Handler + + .weak OTGFS2_WKUP_IRQHandler + .thumb_set OTGFS2_WKUP_IRQHandler,Default_Handler + + .weak OTGFS2_IRQHandler + .thumb_set OTGFS2_IRQHandler,Default_Handler + + .weak DVP_IRQHandler + .thumb_set DVP_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak QSPI2_IRQHandler + .thumb_set QSPI2_IRQHandler,Default_Handler + + .weak QSPI1_IRQHandler + .thumb_set QSPI1_IRQHandler,Default_Handler + + .weak DMAMUX_IRQHandler + .thumb_set DMAMUX_IRQHandler ,Default_Handler + + .weak SDIO2_IRQHandler + .thumb_set SDIO2_IRQHandler ,Default_Handler + + .weak ACC_IRQHandler + .thumb_set ACC_IRQHandler,Default_Handler + + .weak TMR20_BRK_IRQHandler + .thumb_set TMR20_BRK_IRQHandler,Default_Handler + + .weak TMR20_OVF_IRQHandler + .thumb_set TMR20_OVF_IRQHandler,Default_Handler + + .weak TMR20_TRG_HALL_IRQHandler + .thumb_set TMR20_TRG_HALL_IRQHandler,Default_Handler + + .weak TMR20_CH_IRQHandler + .thumb_set TMR20_CH_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak DMA2_Channel6_IRQHandler + .thumb_set DMA2_Channel6_IRQHandler,Default_Handler + + .weak DMA2_Channel7_IRQHandler + .thumb_set DMA2_Channel7_IRQHandler,Default_Handler diff --git a/armlib/at32_sys/cmsis/cm4/device_support/system_at32f435_437.c b/armlib/at32_sys/cmsis/cm4/device_support/system_at32f435_437.c new file mode 100644 index 000000000..e1927db4c --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/device_support/system_at32f435_437.c @@ -0,0 +1,194 @@ +/** + ************************************************************************** + * @file system_at32f435_437.c + * @brief contains all the functions for cmsis cortex-m4 system source file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup AT32F435_437_system + * @{ + */ + +#include "at32f435_437.h" +#include "at32f435_437_crm.h" + +/** @addtogroup AT32F435_437_system_private_defines + * @{ + */ +#define VECT_TAB_OFFSET 0x0 /*!< vector table base offset field. this value must be a multiple of 0x400. */ +/** + * @} + */ + +/** @addtogroup AT32F435_437_system_private_variables + * @{ + */ +unsigned int system_core_clock = HICK_VALUE; /*!< system clock frequency (core clock) */ +/** + * @} + */ + +/** @addtogroup AT32F435_437_system_private_functions + * @{ + */ + +/** + * @brief setup the microcontroller system + * initialize the flash interface. + * @note this function should be used only after reset. + * @param none + * @retval none + */ +void SystemInit (void) +{ +#if defined (__FPU_USED) && (__FPU_USED == 1U) + SCB->CPACR |= ((3U << 10U * 2U) | /* set cp10 full access */ + (3U << 11U * 2U) ); /* set cp11 full access */ +#endif + + /* reset the crm clock configuration to the default reset state(for debug purpose) */ + /* set hicken bit */ + CRM->ctrl_bit.hicken = TRUE; + + /* wait hick stable */ + while(CRM->ctrl_bit.hickstbl != SET); + + /* hick used as system clock */ + CRM->cfg_bit.sclksel = CRM_SCLK_HICK; + + /* wait sclk switch status */ + while(CRM->cfg_bit.sclksts != CRM_SCLK_HICK); + + /* reset hexten, hextbyps, cfden and pllen bits */ + CRM->ctrl &= ~(0x010D0000U); + + /* reset cfg register, include sclk switch, ahbdiv, apb1div, apb2div, adcdiv, clkout bits */ + CRM->cfg = 0; + + /* reset pllms pllns pllfr pllrcs bits */ + CRM->pllcfg = 0x00033002U; + + /* reset clkout[3], usbbufs, hickdiv, clkoutdiv */ + CRM->misc1 = 0; + + /* disable all interrupts enable and clear pending bits */ + CRM->clkint = 0x009F0000U; + + /* + * TODO DXL 这里重新设置了中断向量表,有问题 +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; // vector table relocation in internal sram. +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; // vector table relocation in internal flash. +#endif + */ +} + +/** + * @brief update system_core_clock variable according to clock register values. + * the system_core_clock variable contains the core clock (hclk), it can + * be used by the user application to setup the systick timer or configure + * other parameters. + * @param none + * @retval none + */ +void system_core_clock_update(void) +{ + uint32_t pll_ns = 0, pll_ms = 0, pll_fr = 0, pll_clock_source = 0, pllrcsfreq = 0; + uint32_t temp = 0, div_value = 0; + crm_sclk_type sclk_source; + + static const uint8_t sys_ahb_div_table[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + static const uint8_t pll_fr_table[6] = {1, 2, 4, 8, 16, 32}; + + /* get sclk source */ + sclk_source = crm_sysclk_switch_status_get(); + + switch(sclk_source) + { + case CRM_SCLK_HICK: + if(((CRM->misc1_bit.hick_to_sclk) != RESET) && ((CRM->misc1_bit.hickdiv) != RESET)) + system_core_clock = HICK_VALUE * 6; + else + system_core_clock = HICK_VALUE; + break; + case CRM_SCLK_HEXT: + system_core_clock = HEXT_VALUE; + break; + case CRM_SCLK_PLL: + /* get pll clock source */ + pll_clock_source = CRM->pllcfg_bit.pllrcs; + + /* get multiplication factor */ + pll_ns = CRM->pllcfg_bit.pllns; + pll_ms = CRM->pllcfg_bit.pllms; + pll_fr = pll_fr_table[CRM->pllcfg_bit.pllfr]; + + if (pll_clock_source == CRM_PLL_SOURCE_HICK) + { + /* hick selected as pll clock entry */ + pllrcsfreq = HICK_VALUE; + } + else + { + /* hext selected as pll clock entry */ + pllrcsfreq = HEXT_VALUE; + } + + // TODO DXL For fix error: undefined reference to `__aeabi_uldivmod' + // 1. After code review, I found that pll_ns generally does not exceed 144, that is, it can be treated as u32. + // However, for the robustness of firmware, we still need to make error judgments. + if (pllrcsfreq * pll_ns > UINT32_MAX) { + while (1) { + __NOP(); // !!! Fix me !!! + } + } + system_core_clock = pllrcsfreq * pll_ns / (pll_ms * pll_fr); + // 2. If u64 division is necessary, it is better to link to gcc(-lgcc), but the firmware size will increase. + // system_core_clock = (uint32_t)(((uint64_t)pllrcsfreq * pll_ns) / (pll_ms * pll_fr)); + break; + default: + system_core_clock = HICK_VALUE; + break; + } + + /* compute sclk, ahbclk frequency */ + /* get ahb division */ + temp = CRM->cfg_bit.ahbdiv; + div_value = sys_ahb_div_table[temp]; + /* ahbclk frequency */ + system_core_clock = system_core_clock >> div_value; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/armlib/at32_sys/cmsis/cm4/device_support/system_at32f435_437.h b/armlib/at32_sys/cmsis/cm4/device_support/system_at32f435_437.h new file mode 100644 index 000000000..9bff3b94f --- /dev/null +++ b/armlib/at32_sys/cmsis/cm4/device_support/system_at32f435_437.h @@ -0,0 +1,79 @@ +/** + ************************************************************************** + * @file system_at32f435_437.h + * @brief cmsis cortex-m4 system header file. + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#ifndef __SYSTEM_AT32F435_437_H +#define __SYSTEM_AT32F435_437_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup AT32F435_437_system + * @{ + */ + +#define SystemCoreClock system_core_clock +#define DUMMY_NOP() {__NOP();__NOP();__NOP();__NOP();__NOP(); \ + __NOP();__NOP();__NOP();__NOP();__NOP(); \ + __NOP();__NOP();__NOP();__NOP();__NOP(); \ + __NOP();__NOP();__NOP();__NOP();__NOP();} + +/** @defgroup AT32F435_437_system_exported_variables + * @{ + */ +extern unsigned int system_core_clock; /*!< system clock frequency (core clock) */ + +/** + * @} + */ + +/** @defgroup AT32F435_437_system_exported_functions + * @{ + */ + +extern void SystemInit(void); +extern void system_core_clock_update(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_acc.h b/armlib/at32_sys/drivers/inc/at32f435_437_acc.h new file mode 100644 index 000000000..91c0d91c5 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_acc.h @@ -0,0 +1,204 @@ +/** + ************************************************************************** + * @file at32f435_437_acc.h + * @brief at32f435_437 acc header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_ACC_H +#define __AT32F435_437_ACC_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup ACC + * @{ + */ + +/** @defgroup ACC_exported_constants + * @{ + */ + +#define ACC_CAL_HICKCAL ((uint16_t)0x0000) /*!< acc hick calibration */ +#define ACC_CAL_HICKTRIM ((uint16_t)0x0002) /*!< acc hick trim */ + +#define ACC_RSLOST_FLAG ((uint16_t)0x0002) /*!< acc reference signal lost error flag */ +#define ACC_CALRDY_FLAG ((uint16_t)0x0001) /*!< acc internal high-speed clock calibration ready error flag */ + +#define ACC_CALRDYIEN_INT ((uint16_t)0x0020) /*!< acc internal high-speed clock calibration ready interrupt enable */ +#define ACC_EIEN_INT ((uint16_t)0x0010) /*!< acc reference signal lost interrupt enable */ + +#define ACC_SOF_OTG1 ((uint16_t)0x0000) /*!< acc sof signal select: otg1 */ +#define ACC_SOF_OTG2 ((uint16_t)0x0004) /*!< acc sof signal select: otg2 */ + +/** + * @} + */ + +/** @defgroup ACC_exported_types + * @{ + */ + +/** + * @brief type define acc register all + */ +typedef struct +{ + + /** + * @brief acc sts register, offset:0x00 + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t calrdy : 1; /* [0] */ + __IO uint32_t rslost : 1; /* [1] */ + __IO uint32_t reserved1 : 30;/* [31:2] */ + } sts_bit; + }; + + /** + * @brief acc ctrl1 register, offset:0x04 + */ + union + { + __IO uint32_t ctrl1; + struct + { + __IO uint32_t calon : 1; /* [0] */ + __IO uint32_t entrim : 1; /* [1] */ + __IO uint32_t reserved1 : 2; /* [3:2] */ + __IO uint32_t eien : 1; /* [4] */ + __IO uint32_t calrdyien : 1; /* [5] */ + __IO uint32_t reserved2 : 2; /* [7:6] */ + __IO uint32_t step : 4; /* [11:8] */ + __IO uint32_t reserved3 : 20;/* [31:12] */ + } ctrl1_bit; + }; + + /** + * @brief acc ctrl2 register, offset:0x08 + */ + union + { + __IO uint32_t ctrl2; + struct + { + __IO uint32_t hickcal : 8; /* [7:0] */ + __IO uint32_t hicktrim : 6; /* [13:8] */ + __IO uint32_t reserved1 : 18;/* [31:14] */ + } ctrl2_bit; + }; + + /** + * @brief acc acc_c1 register, offset:0x0C + */ + union + { + __IO uint32_t c1; + struct + { + __IO uint32_t c1 : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } c1_bit; + }; + + /** + * @brief acc acc_c2 register, offset:0x10 + */ + union + { + __IO uint32_t c2; + struct + { + __IO uint32_t c2 : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } c2_bit; + }; + + /** + * @brief acc acc_c3 register, offset:0x14 + */ + union + { + __IO uint32_t c3; + struct + { + __IO uint32_t c3 : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } c3_bit; + }; +} acc_type; + +/** + * @} + */ + +#define ACC ((acc_type *) ACC_BASE) + +/** @defgroup ACC_exported_functions + * @{ + */ + +void acc_calibration_mode_enable(uint16_t acc_trim, confirm_state new_state); +void acc_step_set(uint8_t step_value); +void acc_sof_select(uint16_t sof_sel); +void acc_interrupt_enable(uint16_t acc_int, confirm_state new_state); +uint8_t acc_hicktrim_get(void); +uint8_t acc_hickcal_get(void); +void acc_write_c1(uint16_t acc_c1_value); +void acc_write_c2(uint16_t acc_c2_value); +void acc_write_c3(uint16_t acc_c3_value); +uint16_t acc_read_c1(void); +uint16_t acc_read_c2(void); +uint16_t acc_read_c3(void); +flag_status acc_flag_get(uint16_t acc_flag); +flag_status acc_interrupt_flag_get(uint16_t acc_flag); +void acc_flag_clear(uint16_t acc_flag); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_adc.h b/armlib/at32_sys/drivers/inc/at32f435_437_adc.h new file mode 100644 index 000000000..4d72dd95e --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_adc.h @@ -0,0 +1,937 @@ +/** + ************************************************************************** + * @file at32f435_437_adc.h + * @brief at32f435_437 adc header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_ADC_H +#define __AT32F435_437_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/** @defgroup ADC_interrupts_definition + * @brief adc interrupt + * @{ + */ + +#define ADC_OCCE_INT ((uint32_t)0x00000020) /*!< ordinary channels conversion end interrupt */ +#define ADC_VMOR_INT ((uint32_t)0x00000040) /*!< voltage monitoring out of range interrupt */ +#define ADC_PCCE_INT ((uint32_t)0x00000080) /*!< preempt channels conversion end interrupt */ +#define ADC_OCCO_INT ((uint32_t)0x04000000) /*!< ordinary channel conversion overflow interrupt */ + +/** + * @} + */ + +/** @defgroup ADC_flags_definition + * @brief adc flag + * @{ + */ + +#define ADC_VMOR_FLAG ((uint8_t)0x01) /*!< voltage monitoring out of range flag */ +#define ADC_OCCE_FLAG ((uint8_t)0x02) /*!< ordinary channels conversion end flag */ +#define ADC_PCCE_FLAG ((uint8_t)0x04) /*!< preempt channels conversion end flag */ +#define ADC_PCCS_FLAG ((uint8_t)0x08) /*!< preempt channel conversion start flag */ +#define ADC_OCCS_FLAG ((uint8_t)0x10) /*!< ordinary channel conversion start flag */ +#define ADC_OCCO_FLAG ((uint8_t)0x20) /*!< ordinary channel conversion overflow flag */ +#define ADC_RDY_FLAG ((uint8_t)0x40) /*!< adc ready to conversion flag */ + +/** + * @} + */ + +/** @defgroup ADC_exported_types + * @{ + */ + +/** + * @brief adc division type + */ +typedef enum +{ + ADC_HCLK_DIV_2 = 0x00, /*!< adcclk is hclk/2 */ + ADC_HCLK_DIV_3 = 0x01, /*!< adcclk is hclk/3 */ + ADC_HCLK_DIV_4 = 0x02, /*!< adcclk is hclk/4 */ + ADC_HCLK_DIV_5 = 0x03, /*!< adcclk is hclk/5 */ + ADC_HCLK_DIV_6 = 0x04, /*!< adcclk is hclk/6 */ + ADC_HCLK_DIV_7 = 0x05, /*!< adcclk is hclk/7 */ + ADC_HCLK_DIV_8 = 0x06, /*!< adcclk is hclk/8 */ + ADC_HCLK_DIV_9 = 0x07, /*!< adcclk is hclk/9 */ + ADC_HCLK_DIV_10 = 0x08, /*!< adcclk is hclk/10 */ + ADC_HCLK_DIV_11 = 0x09, /*!< adcclk is hclk/11 */ + ADC_HCLK_DIV_12 = 0x0A, /*!< adcclk is hclk/12 */ + ADC_HCLK_DIV_13 = 0x0B, /*!< adcclk is hclk/13 */ + ADC_HCLK_DIV_14 = 0x0C, /*!< adcclk is hclk/14 */ + ADC_HCLK_DIV_15 = 0x0D, /*!< adcclk is hclk/15 */ + ADC_HCLK_DIV_16 = 0x0E, /*!< adcclk is hclk/16 */ + ADC_HCLK_DIV_17 = 0x0F /*!< adcclk is hclk/17 */ +} adc_div_type; + +/** + * @brief adc combine mode type + */ +typedef enum +{ + ADC_INDEPENDENT_MODE = 0x00, /*!< independent mode */ + ADC_ORDINARY_SMLT_PREEMPT_SMLT_ONESLAVE_MODE = 0x01, /*!< single slaver combined ordinary simultaneous + preempt simultaneous mode */ + ADC_ORDINARY_SMLT_PREEMPT_INTERLTRIG_ONESLAVE_MODE = 0x02, /*!< single slaver combined ordinary simultaneous + preempt interleaved trigger mode */ + ADC_PREEMPT_SMLT_ONLY_ONESLAVE_MODE = 0x05, /*!< single slaver preempt simultaneous mode only */ + ADC_ORDINARY_SMLT_ONLY_ONESLAVE_MODE = 0x06, /*!< single slaver ordinary simultaneous mode only */ + ADC_ORDINARY_SHIFT_ONLY_ONESLAVE_MODE = 0x07, /*!< single slaver ordinary shifting mode only */ + ADC_PREEMPT_INTERLTRIG_ONLY_ONESLAVE_MODE = 0x09, /*!< single slaver preempt interleaved trigger mode only */ + ADC_ORDINARY_SMLT_PREEMPT_SMLT_TWOSLAVE_MODE = 0x11, /*!< double slaver combined ordinary simultaneous + preempt simultaneous mode */ + ADC_ORDINARY_SMLT_PREEMPT_INTERLTRIG_TWOSLAVE_MODE = 0x12, /*!< double slaver combined ordinary simultaneous + preempt interleaved trigger mode */ + ADC_PREEMPT_SMLT_ONLY_TWOSLAVE_MODE = 0x15, /*!< double slaver preempt simultaneous mode only */ + ADC_ORDINARY_SMLT_ONLY_TWOSLAVE_MODE = 0x16, /*!< double slaver ordinary simultaneous mode only */ + ADC_ORDINARY_SHIFT_ONLY_TWOSLAVE_MODE = 0x17, /*!< double slaver ordinary shifting mode only */ + ADC_PREEMPT_INTERLTRIG_ONLY_TWOSLAVE_MODE = 0x19 /*!< double slaver preempt interleaved trigger mode only */ +} adc_combine_mode_type; + +/** + * @brief adc common dma mode type + */ +typedef enum +{ + ADC_COMMON_DMAMODE_DISABLE = 0x00, /*!< dma mode disabled */ + ADC_COMMON_DMAMODE_1 = 0x01, /*!< dma mode1: each dma request trans a half-word data(reference manual account the rule of data package) */ + ADC_COMMON_DMAMODE_2 = 0x02, /*!< dma mode2: each dma request trans two half-word data(reference manual account the rule of data package) */ + ADC_COMMON_DMAMODE_3 = 0x03, /*!< dma mode3: each dma request trans two bytes data(reference manual account the rule of data package) */ + ADC_COMMON_DMAMODE_4 = 0x04, /*!< dma mode4: each dma request trans three bytes data(reference manual account the rule of data package) */ + ADC_COMMON_DMAMODE_5 = 0x05 /*!< dma mode5: odd dma request trans two half-word data,even dma request trans a half-word data(reference manual account the rule of data package) */ +} adc_common_dma_mode_type; + +/** + * @brief adc common sampling interval type + */ +typedef enum +{ + ADC_SAMPLING_INTERVAL_5CYCLES = 0x00, /*!< ordinary shifting mode adjacent adc sampling interval 5 adcclk */ + ADC_SAMPLING_INTERVAL_6CYCLES = 0x01, /*!< ordinary shifting mode adjacent adc sampling interval 6 adcclk */ + ADC_SAMPLING_INTERVAL_7CYCLES = 0x02, /*!< ordinary shifting mode adjacent adc sampling interval 7 adcclk */ + ADC_SAMPLING_INTERVAL_8CYCLES = 0x03, /*!< ordinary shifting mode adjacent adc sampling interval 8 adcclk */ + ADC_SAMPLING_INTERVAL_9CYCLES = 0x04, /*!< ordinary shifting mode adjacent adc sampling interval 9 adcclk */ + ADC_SAMPLING_INTERVAL_10CYCLES = 0x05, /*!< ordinary shifting mode adjacent adc sampling interval 10 adcclk */ + ADC_SAMPLING_INTERVAL_11CYCLES = 0x06, /*!< ordinary shifting mode adjacent adc sampling interval 11 adcclk */ + ADC_SAMPLING_INTERVAL_12CYCLES = 0x07, /*!< ordinary shifting mode adjacent adc sampling interval 12 adcclk */ + ADC_SAMPLING_INTERVAL_13CYCLES = 0x08, /*!< ordinary shifting mode adjacent adc sampling interval 13 adcclk */ + ADC_SAMPLING_INTERVAL_14CYCLES = 0x09, /*!< ordinary shifting mode adjacent adc sampling interval 14 adcclk */ + ADC_SAMPLING_INTERVAL_15CYCLES = 0x0A, /*!< ordinary shifting mode adjacent adc sampling interval 15 adcclk */ + ADC_SAMPLING_INTERVAL_16CYCLES = 0x0B, /*!< ordinary shifting mode adjacent adc sampling interval 16 adcclk */ + ADC_SAMPLING_INTERVAL_17CYCLES = 0x0C, /*!< ordinary shifting mode adjacent adc sampling interval 17 adcclk */ + ADC_SAMPLING_INTERVAL_18CYCLES = 0x0D, /*!< ordinary shifting mode adjacent adc sampling interval 18 adcclk */ + ADC_SAMPLING_INTERVAL_19CYCLES = 0x0E, /*!< ordinary shifting mode adjacent adc sampling interval 19 adcclk */ + ADC_SAMPLING_INTERVAL_20CYCLES = 0x0F /*!< ordinary shifting mode adjacent adc sampling interval 20 adcclk */ +} adc_sampling_interval_type; + +/** + * @brief adc conversion resolution type + */ +typedef enum +{ + ADC_RESOLUTION_12B = 0x00, /*!< conversion resolution 12 bit */ + ADC_RESOLUTION_10B = 0x01, /*!< conversion resolution 10 bit */ + ADC_RESOLUTION_8B = 0x02, /*!< conversion resolution 8 bit */ + ADC_RESOLUTION_6B = 0x03 /*!< conversion resolution 6 bit */ +} adc_resolution_type; + +/** + * @brief adc data align type + */ +typedef enum +{ + ADC_RIGHT_ALIGNMENT = 0x00, /*!< data right alignment */ + ADC_LEFT_ALIGNMENT = 0x01 /*!< data left alignment */ +} adc_data_align_type; + +/** + * @brief adc channel select type + */ +typedef enum +{ + ADC_CHANNEL_0 = 0x00, /*!< adc channel 0 */ + ADC_CHANNEL_1 = 0x01, /*!< adc channel 1 */ + ADC_CHANNEL_2 = 0x02, /*!< adc channel 2 */ + ADC_CHANNEL_3 = 0x03, /*!< adc channel 3 */ + ADC_CHANNEL_4 = 0x04, /*!< adc channel 4 */ + ADC_CHANNEL_5 = 0x05, /*!< adc channel 5 */ + ADC_CHANNEL_6 = 0x06, /*!< adc channel 6 */ + ADC_CHANNEL_7 = 0x07, /*!< adc channel 7 */ + ADC_CHANNEL_8 = 0x08, /*!< adc channel 8 */ + ADC_CHANNEL_9 = 0x09, /*!< adc channel 9 */ + ADC_CHANNEL_10 = 0x0A, /*!< adc channel 10 */ + ADC_CHANNEL_11 = 0x0B, /*!< adc channel 11 */ + ADC_CHANNEL_12 = 0x0C, /*!< adc channel 12 */ + ADC_CHANNEL_13 = 0x0D, /*!< adc channel 13 */ + ADC_CHANNEL_14 = 0x0E, /*!< adc channel 14 */ + ADC_CHANNEL_15 = 0x0F, /*!< adc channel 15 */ + ADC_CHANNEL_16 = 0x10, /*!< adc channel 16 */ + ADC_CHANNEL_17 = 0x11, /*!< adc channel 17 */ + ADC_CHANNEL_18 = 0x12 /*!< adc channel 18 */ +} adc_channel_select_type; + +/** + * @brief adc sampletime select type + */ +typedef enum +{ + ADC_SAMPLETIME_2_5 = 0x00, /*!< adc sample time 2.5 cycle */ + ADC_SAMPLETIME_6_5 = 0x01, /*!< adc sample time 6.5 cycle */ + ADC_SAMPLETIME_12_5 = 0x02, /*!< adc sample time 12.5 cycle */ + ADC_SAMPLETIME_24_5 = 0x03, /*!< adc sample time 24.5 cycle */ + ADC_SAMPLETIME_47_5 = 0x04, /*!< adc sample time 47.5 cycle */ + ADC_SAMPLETIME_92_5 = 0x05, /*!< adc sample time 92.5 cycle */ + ADC_SAMPLETIME_247_5 = 0x06, /*!< adc sample time 247.5 cycle */ + ADC_SAMPLETIME_640_5 = 0x07 /*!< adc sample time 640.5 cycle */ +} adc_sampletime_select_type; + +/** + * @brief adc ordinary group trigger event select type + */ +typedef enum +{ + ADC_ORDINARY_TRIG_TMR1CH1 = 0x00, /*!< timer1 ch1 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR1CH2 = 0x01, /*!< timer1 ch2 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR1CH3 = 0x02, /*!< timer1 ch3 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR2CH2 = 0x03, /*!< timer2 ch2 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR2CH3 = 0x04, /*!< timer2 ch3 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR2CH4 = 0x05, /*!< timer2 ch4 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR2TRGOUT = 0x06, /*!< timer2 trgout event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR3CH1 = 0x07, /*!< timer3 ch1 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR3TRGOUT = 0x08, /*!< timer3 trgout event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR4CH4 = 0x09, /*!< timer4 ch4 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR5CH1 = 0x0A, /*!< timer5 ch1 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR5CH2 = 0x0B, /*!< timer5 ch2 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR5CH3 = 0x0C, /*!< timer5 ch3 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR8CH1 = 0x0D, /*!< timer8 ch1 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR8TRGOUT = 0x0E, /*!< timer8 trgout event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_EXINT11 = 0x0F, /*!< exint line11 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR20TRGOUT = 0x10, /*!< timer20 trgout event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR20TRGOUT2 = 0x11, /*!< timer20 trgout2 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR20CH1 = 0x12, /*!< timer20 ch1 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR20CH2 = 0x13, /*!< timer20 ch2 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR20CH3 = 0x14, /*!< timer20 ch3 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR8TRGOUT2 = 0x15, /*!< timer8 trgout2 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR1TRGOUT2 = 0x16, /*!< timer1 trgout2 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR4TRGOUT = 0x17, /*!< timer4 trgout event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR6TRGOUT = 0x18, /*!< timer6 trgout event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR3CH4 = 0x19, /*!< timer3 ch4 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR4CH1 = 0x1A, /*!< timer4 ch1 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR1TRGOUT = 0x1B, /*!< timer1 trgout event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR2CH1 = 0x1C, /*!< timer2 ch1 event as trigger source of ordinary sequence */ + ADC_ORDINARY_TRIG_TMR7TRGOUT = 0x1E /*!< timer7 trgout event as trigger source of ordinary sequence */ +} adc_ordinary_trig_select_type; + +/** + * @brief adc ordinary channel conversion's external_trigger_edge type + */ +typedef enum +{ + ADC_ORDINARY_TRIG_EDGE_NONE = 0x00, /*!< ordinary channels trigger detection disabled */ + ADC_ORDINARY_TRIG_EDGE_RISING = 0x01, /*!< ordinary channels trigger detection on the rising edge */ + ADC_ORDINARY_TRIG_EDGE_FALLING = 0x02, /*!< ordinary channels trigger detection on the falling edge */ + ADC_ORDINARY_TRIG_EDGE_RISING_FALLING = 0x03 /*!< ordinary channels trigger detection on both the rising and falling edges */ +} adc_ordinary_trig_edge_type; + +/** + * @brief adc preempt group external trigger event select type + */ +typedef enum +{ + ADC_PREEMPT_TRIG_TMR1CH4 = 0x00, /*!< timer1 ch4 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR1TRGOUT = 0x01, /*!< timer1 trgout event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR2CH1 = 0x02, /*!< timer2 ch1 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR2TRGOUT = 0x03, /*!< timer2 trgout event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR3CH2 = 0x04, /*!< timer3 ch2 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR3CH4 = 0x05, /*!< timer3 ch4 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR4CH1 = 0x06, /*!< timer4 ch1 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR4CH2 = 0x07, /*!< timer4 ch2 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR4CH3 = 0x08, /*!< timer4 ch3 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR4TRGOUT = 0x09, /*!< timer4 trgout event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR5CH4 = 0x0A, /*!< timer5 ch4 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR5TRGOUT = 0x0B, /*!< timer5 trgout event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR8CH2 = 0x0C, /*!< timer8 ch2 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR8CH3 = 0x0D, /*!< timer8 ch3 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR8CH4 = 0x0E, /*!< timer8 ch4 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_EXINT15 = 0x0F, /*!< exint line15 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR20TRGOUT = 0x10, /*!< timer20 trgout event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR20TRGOUT2 = 0x11, /*!< timer20 trgout2 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR20CH4 = 0x12, /*!< timer20 ch4 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR1TRGOUT2 = 0x13, /*!< timer1 trgout2 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR8TRGOUT = 0x14, /*!< timer8 trgout event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR8TRGOUT2 = 0x15, /*!< timer8 trgout2 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR3CH3 = 0x16, /*!< timer3 ch3 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR3TRGOUT = 0x17, /*!< timer3 trgout event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR3CH1 = 0x18, /*!< timer3 ch1 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR6TRGOUT = 0x19, /*!< timer6 trgout event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR4CH4 = 0x1A, /*!< timer4 ch4 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR1CH3 = 0x1B, /*!< timer1 ch3 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR20CH2 = 0x1C, /*!< timer20 ch2 event as trigger source of preempt sequence */ + ADC_PREEMPT_TRIG_TMR7TRGOUT = 0x1E /*!< timer7 trgout event as trigger source of preempt sequence */ +} adc_preempt_trig_select_type; + +/** + * @brief adc preempt channel conversion's external_trigger_edge type + */ +typedef enum +{ + ADC_PREEMPT_TRIG_EDGE_NONE = 0x00, /*!< preempt channels trigger detection disabled */ + ADC_PREEMPT_TRIG_EDGE_RISING = 0x01, /*!< preempt channels trigger detection on the rising edge */ + ADC_PREEMPT_TRIG_EDGE_FALLING = 0x02, /*!< preempt channels trigger detection on the falling edge */ + ADC_PREEMPT_TRIG_EDGE_RISING_FALLING = 0x03 /*!< preempt channels trigger detection on both the rising and falling edges */ +} adc_preempt_trig_edge_type; + +/** + * @brief adc preempt channel type + */ +typedef enum +{ + ADC_PREEMPT_CHANNEL_1 = 0x00, /*!< adc preempt channel 1 */ + ADC_PREEMPT_CHANNEL_2 = 0x01, /*!< adc preempt channel 2 */ + ADC_PREEMPT_CHANNEL_3 = 0x02, /*!< adc preempt channel 3 */ + ADC_PREEMPT_CHANNEL_4 = 0x03 /*!< adc preempt channel 4 */ +} adc_preempt_channel_type; + +/** + * @brief adc voltage_monitoring type + */ +typedef enum +{ + ADC_VMONITOR_SINGLE_ORDINARY = 0x00800200, /*!< voltage_monitoring on a single ordinary channel */ + ADC_VMONITOR_SINGLE_PREEMPT = 0x00400200, /*!< voltage_monitoring on a single preempt channel */ + ADC_VMONITOR_SINGLE_ORDINARY_PREEMPT = 0x00C00200, /*!< voltage_monitoring on a single ordinary or preempt channel */ + ADC_VMONITOR_ALL_ORDINARY = 0x00800000, /*!< voltage_monitoring on all ordinary channel */ + ADC_VMONITOR_ALL_PREEMPT = 0x00400000, /*!< voltage_monitoring on all preempt channel */ + ADC_VMONITOR_ALL_ORDINARY_PREEMPT = 0x00C00000, /*!< voltage_monitoring on all ordinary and preempt channel */ + ADC_VMONITOR_NONE = 0x00000000 /*!< no channel guarded by the voltage_monitoring */ +} adc_voltage_monitoring_type; + +/** + * @brief adc oversample ratio type + */ +typedef enum +{ + ADC_OVERSAMPLE_RATIO_2 = 0x00, /*!< adc oversample ratio 2 */ + ADC_OVERSAMPLE_RATIO_4 = 0x01, /*!< adc oversample ratio 4 */ + ADC_OVERSAMPLE_RATIO_8 = 0x02, /*!< adc oversample ratio 8 */ + ADC_OVERSAMPLE_RATIO_16 = 0x03, /*!< adc oversample ratio 16 */ + ADC_OVERSAMPLE_RATIO_32 = 0x04, /*!< adc oversample ratio 32 */ + ADC_OVERSAMPLE_RATIO_64 = 0x05, /*!< adc oversample ratio 64 */ + ADC_OVERSAMPLE_RATIO_128 = 0x06, /*!< adc oversample ratio 128 */ + ADC_OVERSAMPLE_RATIO_256 = 0x07 /*!< adc oversample ratio 256 */ +} adc_oversample_ratio_type; + +/** + * @brief adc oversample shift type + */ +typedef enum +{ + ADC_OVERSAMPLE_SHIFT_0 = 0x00, /*!< adc oversample shift 0 */ + ADC_OVERSAMPLE_SHIFT_1 = 0x01, /*!< adc oversample shift 1 */ + ADC_OVERSAMPLE_SHIFT_2 = 0x02, /*!< adc oversample shift 2 */ + ADC_OVERSAMPLE_SHIFT_3 = 0x03, /*!< adc oversample shift 3 */ + ADC_OVERSAMPLE_SHIFT_4 = 0x04, /*!< adc oversample shift 4 */ + ADC_OVERSAMPLE_SHIFT_5 = 0x05, /*!< adc oversample shift 5 */ + ADC_OVERSAMPLE_SHIFT_6 = 0x06, /*!< adc oversample shift 6 */ + ADC_OVERSAMPLE_SHIFT_7 = 0x07, /*!< adc oversample shift 7 */ + ADC_OVERSAMPLE_SHIFT_8 = 0x08 /*!< adc oversample shift 8 */ +} adc_oversample_shift_type; + +/** + * @brief adc ordinary oversample recover type + */ +typedef enum +{ + ADC_OVERSAMPLE_CONTINUE = 0x00, /*!< continue mode:when preempt triggered,oversampling is temporary stopped and continued after preempt sequence */ + ADC_OVERSAMPLE_RESTART = 0x01 /*!< restart mode:when preempt triggered,oversampling is aborted and resumed from start after preempt sequence */ +} adc_ordinary_oversample_restart_type; + +/** + * @brief adc common config type + */ +typedef struct +{ + adc_combine_mode_type combine_mode; /*!< adc combine mode select */ + adc_div_type div; /*!< adc division select */ + adc_common_dma_mode_type common_dma_mode; /*!< adc common dma mode select */ + confirm_state common_dma_request_repeat_state; /*!< adc common dma repeat state */ + adc_sampling_interval_type sampling_interval; /*!< ordinary shifting mode adjacent adc sampling interval select */ + confirm_state tempervintrv_state; /*!< adc temperature sensor and vintrv state */ + confirm_state vbat_state; /*!< adc voltage battery state */ +} adc_common_config_type; + +/** + * @brief adc base config type + */ +typedef struct +{ + confirm_state sequence_mode; /*!< adc sequence mode */ + confirm_state repeat_mode; /*!< adc repeat mode */ + adc_data_align_type data_align; /*!< adc data alignment */ + uint8_t ordinary_channel_length; /*!< adc ordinary channel sequence length*/ +} adc_base_config_type; + +/** + * @brief type define adc register all + */ +typedef struct +{ + + /** + * @brief adc sts register, offset:0x00 + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t vmor : 1; /* [0] */ + __IO uint32_t occe : 1; /* [1] */ + __IO uint32_t pcce : 1; /* [2] */ + __IO uint32_t pccs : 1; /* [3] */ + __IO uint32_t occs : 1; /* [4] */ + __IO uint32_t occo : 1; /* [5] */ + __IO uint32_t rdy : 1; /* [6] */ + __IO uint32_t reserved1 : 25;/* [31:7] */ + } sts_bit; + }; + + /** + * @brief adc ctrl1 register, offset:0x04 + */ + union + { + __IO uint32_t ctrl1; + struct + { + __IO uint32_t vmcsel : 5; /* [4:0] */ + __IO uint32_t occeien : 1; /* [5] */ + __IO uint32_t vmorien : 1; /* [6] */ + __IO uint32_t pcceien : 1; /* [7] */ + __IO uint32_t sqen : 1; /* [8] */ + __IO uint32_t vmsgen : 1; /* [9] */ + __IO uint32_t pcautoen : 1; /* [10] */ + __IO uint32_t ocpen : 1; /* [11] */ + __IO uint32_t pcpen : 1; /* [12] */ + __IO uint32_t ocpcnt : 3; /* [15:13] */ + __IO uint32_t reserved1 : 6; /* [21:16] */ + __IO uint32_t pcvmen : 1; /* [22] */ + __IO uint32_t ocvmen : 1; /* [23] */ + __IO uint32_t crsel : 2; /* [25:24] */ + __IO uint32_t occoien : 1; /* [26] */ + __IO uint32_t reserved2 : 5; /* [31:27] */ + } ctrl1_bit; + }; + + /** + * @brief adc ctrl2 register, offset:0x08 + */ + union + { + __IO uint32_t ctrl2; + struct + { + __IO uint32_t adcen : 1; /* [0] */ + __IO uint32_t rpen : 1; /* [1] */ + __IO uint32_t adcal : 1; /* [2] */ + __IO uint32_t adcalinit : 1; /* [3] */ + __IO uint32_t adabrt : 1; /* [4] */ + __IO uint32_t reserved1 : 3; /* [7:5] */ + __IO uint32_t ocdmaen : 1; /* [8] */ + __IO uint32_t ocdrcen : 1; /* [9] */ + __IO uint32_t eocsfen : 1; /* [10] */ + __IO uint32_t dtalign : 1; /* [11] */ + __IO uint32_t reserved2 : 4; /* [15:12] */ + __IO uint32_t pctesel_l : 4; /* [19:16] */ + __IO uint32_t pcete : 2; /* [21:20] */ + __IO uint32_t pcswtrg : 1; /* [22] */ + __IO uint32_t pctesel_h : 1; /* [23] */ + __IO uint32_t octesel_l : 4; /* [27:24] */ + __IO uint32_t ocete : 2; /* [29:28] */ + __IO uint32_t ocswtrg : 1; /* [30] */ + __IO uint32_t octesel_h : 1; /* [31] */ + } ctrl2_bit; + }; + + /** + * @brief adc spt1 register, offset:0x0C + */ + union + { + __IO uint32_t spt1; + struct + { + __IO uint32_t cspt10 : 3; /* [2:0] */ + __IO uint32_t cspt11 : 3; /* [5:3] */ + __IO uint32_t cspt12 : 3; /* [8:6] */ + __IO uint32_t cspt13 : 3; /* [11:9] */ + __IO uint32_t cspt14 : 3; /* [14:12] */ + __IO uint32_t cspt15 : 3; /* [17:15] */ + __IO uint32_t cspt16 : 3; /* [20:18] */ + __IO uint32_t cspt17 : 3; /* [23:21] */ + __IO uint32_t cspt18 : 3; /* [26:24] */ + __IO uint32_t reserved1 : 5;/* [31:27] */ + } spt1_bit; + }; + + /** + * @brief adc spt2 register, offset:0x10 + */ + union + { + __IO uint32_t spt2; + struct + { + __IO uint32_t cspt0 : 3;/* [2:0] */ + __IO uint32_t cspt1 : 3;/* [5:3] */ + __IO uint32_t cspt2 : 3;/* [8:6] */ + __IO uint32_t cspt3 : 3;/* [11:9] */ + __IO uint32_t cspt4 : 3;/* [14:12] */ + __IO uint32_t cspt5 : 3;/* [17:15] */ + __IO uint32_t cspt6 : 3;/* [20:18] */ + __IO uint32_t cspt7 : 3;/* [23:21] */ + __IO uint32_t cspt8 : 3;/* [26:24] */ + __IO uint32_t cspt9 : 3;/* [29:27] */ + __IO uint32_t reserved1 : 2;/* [31:30] */ + } spt2_bit; + }; + + /** + * @brief adc pcdto1 register, offset:0x14 + */ + union + { + __IO uint32_t pcdto1; + struct + { + __IO uint32_t pcdto1 : 12; /* [11:0] */ + __IO uint32_t reserved1 : 20; /* [31:12] */ + } pcdto1_bit; + }; + + /** + * @brief adc pcdto2 register, offset:0x18 + */ + union + { + __IO uint32_t pcdto2; + struct + { + __IO uint32_t pcdto2 : 12; /* [11:0] */ + __IO uint32_t reserved1 : 20; /* [31:12] */ + } pcdto2_bit; + }; + + /** + * @brief adc pcdto3 register, offset:0x1C + */ + union + { + __IO uint32_t pcdto3; + struct + { + __IO uint32_t pcdto3 : 12; /* [11:0] */ + __IO uint32_t reserved1 : 20; /* [31:12] */ + } pcdto3_bit; + }; + + /** + * @brief adc pcdto4 register, offset:0x20 + */ + union + { + __IO uint32_t pcdto4; + struct + { + __IO uint32_t pcdto4 : 12; /* [11:0] */ + __IO uint32_t reserved1 : 20; /* [31:12] */ + } pcdto4_bit; + }; + + /** + * @brief adc vmhb register, offset:0x24 + */ + union + { + __IO uint32_t vmhb; + struct + { + __IO uint32_t vmhb : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } vmhb_bit; + }; + + /** + * @brief adc vmlb register, offset:0x28 + */ + union + { + __IO uint32_t vmlb; + struct + { + __IO uint32_t vmlb : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } vmlb_bit; + }; + + /** + * @brief adc osq1 register, offset:0x2C + */ + union + { + __IO uint32_t osq1; + struct + { + __IO uint32_t osn13 : 5; /* [4:0] */ + __IO uint32_t osn14 : 5; /* [9:5] */ + __IO uint32_t osn15 : 5; /* [14:10] */ + __IO uint32_t osn16 : 5; /* [19:15] */ + __IO uint32_t oclen : 4; /* [23:20] */ + __IO uint32_t reserved1 : 8; /* [31:24] */ + } osq1_bit; + }; + + /** + * @brief adc osq2 register, offset:0x30 + */ + union + { + __IO uint32_t osq2; + struct + { + __IO uint32_t osn7 : 5; /* [4:0] */ + __IO uint32_t osn8 : 5; /* [9:5] */ + __IO uint32_t osn9 : 5; /* [14:10] */ + __IO uint32_t osn10 : 5; /* [19:15] */ + __IO uint32_t osn11 : 5; /* [24:20] */ + __IO uint32_t osn12 : 5; /* [29:25] */ + __IO uint32_t reserved1 : 2; /* [31:30] */ + } osq2_bit; + }; + + /** + * @brief adc osq3 register, offset:0x34 + */ + union + { + __IO uint32_t osq3; + struct + { + __IO uint32_t osn1 : 5; /* [4:0] */ + __IO uint32_t osn2 : 5; /* [9:5] */ + __IO uint32_t osn3 : 5; /* [14:10] */ + __IO uint32_t osn4 : 5; /* [19:15] */ + __IO uint32_t osn5 : 5; /* [24:20] */ + __IO uint32_t osn6 : 5; /* [29:25] */ + __IO uint32_t reserved1 : 2; /* [31:30] */ + } osq3_bit; + }; + + /** + * @brief adc psq register, offset:0x38 + */ + union + { + __IO uint32_t psq; + struct + { + __IO uint32_t psn1 : 5; /* [4:0] */ + __IO uint32_t psn2 : 5; /* [9:5] */ + __IO uint32_t psn3 : 5; /* [14:10] */ + __IO uint32_t psn4 : 5; /* [19:15] */ + __IO uint32_t pclen : 2; /* [21:20] */ + __IO uint32_t reserved1 : 10;/* [31:22] */ + } psq_bit; + }; + + /** + * @brief adc pdt1 register, offset:0x3C + */ + union + { + __IO uint32_t pdt1; + struct + { + __IO uint32_t pdt1 : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } pdt1_bit; + }; + + /** + * @brief adc pdt2 register, offset:0x40 + */ + union + { + __IO uint32_t pdt2; + struct + { + __IO uint32_t pdt2 : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } pdt2_bit; + }; + + /** + * @brief adc pdt3 register, offset:0x44 + */ + union + { + __IO uint32_t pdt3; + struct + { + __IO uint32_t pdt3 : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } pdt3_bit; + }; + + /** + * @brief adc pdt4 register, offset:0x48 + */ + union + { + __IO uint32_t pdt4; + struct + { + __IO uint32_t pdt4 : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } pdt4_bit; + }; + + /** + * @brief adc odt register, offset:0x4C + */ + union + { + __IO uint32_t odt; + struct + { + __IO uint32_t odt : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } odt_bit; + }; + + __IO uint32_t reserved1[12]; + + /** + * @brief adc ovsp register, offset:0x80 + */ + union + { + __IO uint32_t ovsp; + struct + { + __IO uint32_t oosen : 1; /* [0] */ + __IO uint32_t posen : 1; /* [1] */ + __IO uint32_t osrsel : 3; /* [4:2] */ + __IO uint32_t osssel : 4; /* [8:5] */ + __IO uint32_t oostren : 1; /* [9] */ + __IO uint32_t oosrsel : 1; /* [10] */ + __IO uint32_t reserved1 : 21; /* [31:11] */ + } ovsp_bit; + }; + + __IO uint32_t reserved2[12]; + + /** + * @brief adc calval register, offset:0xB4 + */ + union + { + __IO uint32_t calval; + struct + { + __IO uint32_t calval : 7; /* [6:0] */ + __IO uint32_t reserved1 : 25; /* [31:7] */ + } calval_bit; + }; +} adc_type; + +/** + * @brief type define adc register all + */ +typedef struct +{ + + /** + * @brief adc csts register, offset:0x00 + */ + union + { + __IO uint32_t csts; + struct + { + __IO uint32_t vmor1 : 1; /* [0] */ + __IO uint32_t occe1 : 1; /* [1] */ + __IO uint32_t pcce1 : 1; /* [2] */ + __IO uint32_t pccs1 : 1; /* [3] */ + __IO uint32_t occs1 : 1; /* [4] */ + __IO uint32_t occo1 : 1; /* [5] */ + __IO uint32_t rdy1 : 1; /* [6] */ + __IO uint32_t reserved1 : 1; /* [7] */ + __IO uint32_t vmor2 : 1; /* [8] */ + __IO uint32_t occe2 : 1; /* [9] */ + __IO uint32_t pcce2 : 1; /* [10] */ + __IO uint32_t pccs2 : 1; /* [11] */ + __IO uint32_t occs2 : 1; /* [12] */ + __IO uint32_t occo2 : 1; /* [13] */ + __IO uint32_t rdy2 : 1; /* [14] */ + __IO uint32_t reserved2 : 1; /* [15] */ + __IO uint32_t vmor3 : 1; /* [16] */ + __IO uint32_t occe3 : 1; /* [17] */ + __IO uint32_t pcce3 : 1; /* [18] */ + __IO uint32_t pccs3 : 1; /* [19] */ + __IO uint32_t occs3 : 1; /* [20] */ + __IO uint32_t occo3 : 1; /* [21] */ + __IO uint32_t rdy3 : 1; /* [22] */ + __IO uint32_t reserved3 : 9; /* [31:23] */ + } csts_bit; + }; + + /** + * @brief adc cctrl register, offset:0x04 + */ + union + { + __IO uint32_t cctrl; + struct + { + __IO uint32_t mssel : 5; /* [4_0] */ + __IO uint32_t reserved1 : 3; /* [7:5] */ + __IO uint32_t asisel : 4; /* [11:8] */ + __IO uint32_t reserved2 : 1; /* [12] */ + __IO uint32_t msdrcen : 1; /* [13] */ + __IO uint32_t msdmasel_l : 2; /* [15:14] */ + __IO uint32_t adcdiv : 4; /* [19:16] */ + __IO uint32_t reserved3 : 2; /* [21:20] */ + __IO uint32_t vbaten : 1; /* [22] */ + __IO uint32_t itsrven : 1; /* [23] */ + __IO uint32_t reserved4 : 4; /* [27:24] */ + __IO uint32_t msdmasel_h : 1; /* [28] */ + __IO uint32_t reserved5 : 3; /* [31:29] */ + } cctrl_bit; + }; + + /** + * @brief adc codt register, offset:0x08 + */ + union + { + __IO uint32_t codt; + struct + { + __IO uint32_t codtl : 16; /* [15:0] */ + __IO uint32_t codth : 16; /* [31:16] */ + } codt_bit; + }; +} adccom_type; + +/** + * @} + */ + +#define ADC1 ((adc_type *) ADC1_BASE) +#define ADC2 ((adc_type *) ADC2_BASE) +#define ADC3 ((adc_type *) ADC3_BASE) +#define ADCCOM ((adccom_type *) ADCCOM_BASE) + +/** @defgroup ADC_exported_functions + * @{ + */ + +void adc_reset(void); +void adc_enable(adc_type *adc_x, confirm_state new_state); +void adc_base_default_para_init(adc_base_config_type *adc_base_struct); +void adc_base_config(adc_type *adc_x, adc_base_config_type *adc_base_struct); +void adc_common_default_para_init(adc_common_config_type *adc_common_struct); +void adc_common_config(adc_common_config_type *adc_common_struct); +void adc_resolution_set(adc_type *adc_x, adc_resolution_type resolution); +void adc_voltage_battery_enable(confirm_state new_state); +void adc_dma_mode_enable(adc_type *adc_x, confirm_state new_state); +void adc_dma_request_repeat_enable(adc_type *adc_x, confirm_state new_state); +void adc_interrupt_enable(adc_type *adc_x, uint32_t adc_int, confirm_state new_state); +void adc_calibration_value_set(adc_type *adc_x, uint8_t adc_calibration_value); +void adc_calibration_init(adc_type *adc_x); +flag_status adc_calibration_init_status_get(adc_type *adc_x); +void adc_calibration_start(adc_type *adc_x); +flag_status adc_calibration_status_get(adc_type *adc_x); +void adc_voltage_monitor_enable(adc_type *adc_x, adc_voltage_monitoring_type adc_voltage_monitoring); +void adc_voltage_monitor_threshold_value_set(adc_type *adc_x, uint16_t adc_high_threshold, uint16_t adc_low_threshold); +void adc_voltage_monitor_single_channel_select(adc_type *adc_x, adc_channel_select_type adc_channel); +void adc_ordinary_channel_set(adc_type *adc_x, adc_channel_select_type adc_channel, uint8_t adc_sequence, adc_sampletime_select_type adc_sampletime); +void adc_preempt_channel_length_set(adc_type *adc_x, uint8_t adc_channel_lenght); +void adc_preempt_channel_set(adc_type *adc_x, adc_channel_select_type adc_channel, uint8_t adc_sequence, adc_sampletime_select_type adc_sampletime); +void adc_ordinary_conversion_trigger_set(adc_type *adc_x, adc_ordinary_trig_select_type adc_ordinary_trig, adc_ordinary_trig_edge_type adc_ordinary_trig_edge); +void adc_preempt_conversion_trigger_set(adc_type *adc_x, adc_preempt_trig_select_type adc_preempt_trig, adc_preempt_trig_edge_type adc_preempt_trig_edge); +void adc_preempt_offset_value_set(adc_type *adc_x, adc_preempt_channel_type adc_preempt_channel, uint16_t adc_offset_value); +void adc_ordinary_part_count_set(adc_type *adc_x, uint8_t adc_channel_count); +void adc_ordinary_part_mode_enable(adc_type *adc_x, confirm_state new_state); +void adc_preempt_part_mode_enable(adc_type *adc_x, confirm_state new_state); +void adc_preempt_auto_mode_enable(adc_type *adc_x, confirm_state new_state); +void adc_conversion_stop(adc_type *adc_x); +flag_status adc_conversion_stop_status_get(adc_type *adc_x); +void adc_occe_each_conversion_enable(adc_type *adc_x, confirm_state new_state); +void adc_ordinary_software_trigger_enable(adc_type *adc_x, confirm_state new_state); +flag_status adc_ordinary_software_trigger_status_get(adc_type *adc_x); +void adc_preempt_software_trigger_enable(adc_type *adc_x, confirm_state new_state); +flag_status adc_preempt_software_trigger_status_get(adc_type *adc_x); +uint16_t adc_ordinary_conversion_data_get(adc_type *adc_x); +uint32_t adc_combine_ordinary_conversion_data_get(void); +uint16_t adc_preempt_conversion_data_get(adc_type *adc_x, adc_preempt_channel_type adc_preempt_channel); +flag_status adc_flag_get(adc_type *adc_x, uint8_t adc_flag); +flag_status adc_interrupt_flag_get(adc_type *adc_x, uint8_t adc_flag); +void adc_flag_clear(adc_type *adc_x, uint32_t adc_flag); +void adc_ordinary_oversample_enable(adc_type *adc_x, confirm_state new_state); +void adc_preempt_oversample_enable(adc_type *adc_x, confirm_state new_state); +void adc_oversample_ratio_shift_set(adc_type *adc_x, adc_oversample_ratio_type adc_oversample_ratio, adc_oversample_shift_type adc_oversample_shift); +void adc_ordinary_oversample_trig_enable(adc_type *adc_x, confirm_state new_state); +void adc_ordinary_oversample_restart_set(adc_type *adc_x, adc_ordinary_oversample_restart_type adc_ordinary_oversample_restart); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_can.h b/armlib/at32_sys/drivers/inc/at32f435_437_can.h new file mode 100644 index 000000000..3dd901138 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_can.h @@ -0,0 +1,1041 @@ +/** + ************************************************************************** + * @file at32f435_437_can.h + * @brief at32f435_437 can header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_CAN_H +#define __AT32F435_437_CAN_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup CAN + * @{ + */ + + +/** @defgroup CAN_timeout_count + * @{ + */ + +#define FZC_TIMEOUT ((uint32_t)0x0000FFFF) /*!< time out for fzc bit */ +#define DZC_TIMEOUT ((uint32_t)0x0000FFFF) /*!< time out for dzc bit */ + +/** + * @} + */ + +/** @defgroup CAN_flags_definition + * @brief can flag + * @{ + */ + +#define CAN_EAF_FLAG ((uint32_t)0x01) /*!< error active flag */ +#define CAN_EPF_FLAG ((uint32_t)0x02) /*!< error passive flag */ +#define CAN_BOF_FLAG ((uint32_t)0x03) /*!< bus-off flag */ +#define CAN_ETR_FLAG ((uint32_t)0x04) /*!< error type record flag */ +#define CAN_EOIF_FLAG ((uint32_t)0x05) /*!< error occur interrupt flag */ +#define CAN_TM0TCF_FLAG ((uint32_t)0x06) /*!< transmit mailbox 0 transmission completed flag */ +#define CAN_TM1TCF_FLAG ((uint32_t)0x07) /*!< transmit mailbox 1 transmission completed flag */ +#define CAN_TM2TCF_FLAG ((uint32_t)0x08) /*!< transmit mailbox 2 transmission completed flag */ +#define CAN_RF0MN_FLAG ((uint32_t)0x09) /*!< receive fifo 0 message num flag */ +#define CAN_RF0FF_FLAG ((uint32_t)0x0A) /*!< receive fifo 0 full flag */ +#define CAN_RF0OF_FLAG ((uint32_t)0x0B) /*!< receive fifo 0 overflow flag */ +#define CAN_RF1MN_FLAG ((uint32_t)0x0C) /*!< receive fifo 1 message num flag */ +#define CAN_RF1FF_FLAG ((uint32_t)0x0D) /*!< receive fifo 1 full flag */ +#define CAN_RF1OF_FLAG ((uint32_t)0x0E) /*!< receive fifo 1 overflow flag */ +#define CAN_QDZIF_FLAG ((uint32_t)0x0F) /*!< quit doze mode interrupt flag */ +#define CAN_EDZC_FLAG ((uint32_t)0x10) /*!< enter doze mode confirm flag */ +#define CAN_TMEF_FLAG ((uint32_t)0x11) /*!< transmit mailbox empty flag */ + +/** + * @} + */ + +/** @defgroup CAN_interrupts_definition + * @brief can interrupt + * @{ + */ + +#define CAN_TCIEN_INT ((uint32_t)0x00000001) /*!< transmission complete interrupt */ +#define CAN_RF0MIEN_INT ((uint32_t)0x00000002) /*!< receive fifo 0 message interrupt */ +#define CAN_RF0FIEN_INT ((uint32_t)0x00000004) /*!< receive fifo 0 full interrupt */ +#define CAN_RF0OIEN_INT ((uint32_t)0x00000008) /*!< receive fifo 0 overflow interrupt */ +#define CAN_RF1MIEN_INT ((uint32_t)0x00000010) /*!< receive fifo 1 message interrupt */ +#define CAN_RF1FIEN_INT ((uint32_t)0x00000020) /*!< receive fifo 1 full interrupt */ +#define CAN_RF1OIEN_INT ((uint32_t)0x00000040) /*!< receive fifo 1 overflow interrupt */ +#define CAN_EAIEN_INT ((uint32_t)0x00000100) /*!< error active interrupt */ +#define CAN_EPIEN_INT ((uint32_t)0x00000200) /*!< error passive interrupt */ +#define CAN_BOIEN_INT ((uint32_t)0x00000400) /*!< bus-off interrupt */ +#define CAN_ETRIEN_INT ((uint32_t)0x00000800) /*!< error type record interrupt */ +#define CAN_EOIEN_INT ((uint32_t)0x00008000) /*!< error occur interrupt */ +#define CAN_QDZIEN_INT ((uint32_t)0x00010000) /*!< quit doze mode interrupt */ +#define CAN_EDZIEN_INT ((uint32_t)0x00020000) /*!< enter doze mode confirm interrupt */ + +/** + * @} + */ + +/** + * @brief can flag clear operation macro definition val + */ +#define CAN_MSTS_EOIF_VAL ((uint32_t)0x00000004) /*!< eoif bit value, it clear by writing 1 */ +#define CAN_MSTS_QDZIF_VAL ((uint32_t)0x00000008) /*!< qdzif bit value, it clear by writing 1 */ +#define CAN_MSTS_EDZIF_VAL ((uint32_t)0x00000010) /*!< edzif bit value, it clear by writing 1 */ +#define CAN_TSTS_TM0TCF_VAL ((uint32_t)0x00000001) /*!< tm0tcf bit value, it clear by writing 1 */ +#define CAN_TSTS_TM1TCF_VAL ((uint32_t)0x00000100) /*!< tm1tcf bit value, it clear by writing 1 */ +#define CAN_TSTS_TM2TCF_VAL ((uint32_t)0x00010000) /*!< tm2tcf bit value, it clear by writing 1 */ +#define CAN_TSTS_TM0CT_VAL ((uint32_t)0x00000080) /*!< tm0ct bit value, it clear by writing 1 */ +#define CAN_TSTS_TM1CT_VAL ((uint32_t)0x00008000) /*!< tm1ct bit value, it clear by writing 1 */ +#define CAN_TSTS_TM2CT_VAL ((uint32_t)0x00800000) /*!< tm2ct bit value, it clear by writing 1 */ +#define CAN_RF0_RF0FF_VAL ((uint32_t)0x00000008) /*!< rf0ff bit value, it clear by writing 1 */ +#define CAN_RF0_RF0OF_VAL ((uint32_t)0x00000010) /*!< rf0of bit value, it clear by writing 1 */ +#define CAN_RF0_RF0R_VAL ((uint32_t)0x00000020) /*!< rf0r bit value, it clear by writing 1 */ +#define CAN_RF1_RF1FF_VAL ((uint32_t)0x00000008) /*!< rf1ff bit value, it clear by writing 1 */ +#define CAN_RF1_RF1OF_VAL ((uint32_t)0x00000010) /*!< rf1of bit value, it clear by writing 1 */ +#define CAN_RF1_RF1R_VAL ((uint32_t)0x00000020) /*!< rf1r bit value, it clear by writing 1 */ + +/** @defgroup CAN_exported_types + * @{ + */ + +/** + * @brief can filter fifo + */ +typedef enum +{ + CAN_FILTER_FIFO0 = 0x00, /*!< filter fifo 0 assignment for filter x */ + CAN_FILTER_FIFO1 = 0x01 /*!< filter fifo 1 assignment for filter x */ +} can_filter_fifo_type; + +/** + * @brief can filter mode + */ +typedef enum +{ + CAN_FILTER_MODE_ID_MASK = 0x00, /*!< identifier mask mode */ + CAN_FILTER_MODE_ID_LIST = 0x01 /*!< identifier list mode */ +} can_filter_mode_type; + +/** + * @brief can filter bit width select + */ +typedef enum +{ + CAN_FILTER_16BIT = 0x00, /*!< two 16-bit filters */ + CAN_FILTER_32BIT = 0x01 /*!< one 32-bit filter */ +} can_filter_bit_width_type; + +/** + * @brief can mode + */ +typedef enum +{ + CAN_MODE_COMMUNICATE = 0x00, /*!< communication mode */ + CAN_MODE_LOOPBACK = 0x01, /*!< loopback mode */ + CAN_MODE_LISTENONLY = 0x02, /*!< listen-only mode */ + CAN_MODE_LISTENONLY_LOOPBACK = 0x03 /*!< loopback combined with listen-only mode */ +} can_mode_type; + +/** + * @brief can operating mode + */ +typedef enum +{ + CAN_OPERATINGMODE_FREEZE = 0x00, /*!< freeze mode */ + CAN_OPERATINGMODE_DOZE = 0x01, /*!< doze mode */ + CAN_OPERATINGMODE_COMMUNICATE = 0x02 /*!< communication mode */ +} can_operating_mode_type; + +/** + * @brief can resynchronization adjust width + */ +typedef enum +{ + CAN_RSAW_1TQ = 0x00, /*!< 1 time quantum */ + CAN_RSAW_2TQ = 0x01, /*!< 2 time quantum */ + CAN_RSAW_3TQ = 0x02, /*!< 3 time quantum */ + CAN_RSAW_4TQ = 0x03 /*!< 4 time quantum */ +} can_rsaw_type; + +/** + * @brief can bit time segment 1 + */ +typedef enum +{ + CAN_BTS1_1TQ = 0x00, /*!< 1 time quantum */ + CAN_BTS1_2TQ = 0x01, /*!< 2 time quantum */ + CAN_BTS1_3TQ = 0x02, /*!< 3 time quantum */ + CAN_BTS1_4TQ = 0x03, /*!< 4 time quantum */ + CAN_BTS1_5TQ = 0x04, /*!< 5 time quantum */ + CAN_BTS1_6TQ = 0x05, /*!< 6 time quantum */ + CAN_BTS1_7TQ = 0x06, /*!< 7 time quantum */ + CAN_BTS1_8TQ = 0x07, /*!< 8 time quantum */ + CAN_BTS1_9TQ = 0x08, /*!< 9 time quantum */ + CAN_BTS1_10TQ = 0x09, /*!< 10 time quantum */ + CAN_BTS1_11TQ = 0x0A, /*!< 11 time quantum */ + CAN_BTS1_12TQ = 0x0B, /*!< 12 time quantum */ + CAN_BTS1_13TQ = 0x0C, /*!< 13 time quantum */ + CAN_BTS1_14TQ = 0x0D, /*!< 14 time quantum */ + CAN_BTS1_15TQ = 0x0E, /*!< 15 time quantum */ + CAN_BTS1_16TQ = 0x0F /*!< 16 time quantum */ +} can_bts1_type; + +/** + * @brief can bit time segment 2 + */ +typedef enum +{ + CAN_BTS2_1TQ = 0x00, /*!< 1 time quantum */ + CAN_BTS2_2TQ = 0x01, /*!< 2 time quantum */ + CAN_BTS2_3TQ = 0x02, /*!< 3 time quantum */ + CAN_BTS2_4TQ = 0x03, /*!< 4 time quantum */ + CAN_BTS2_5TQ = 0x04, /*!< 5 time quantum */ + CAN_BTS2_6TQ = 0x05, /*!< 6 time quantum */ + CAN_BTS2_7TQ = 0x06, /*!< 7 time quantum */ + CAN_BTS2_8TQ = 0x07 /*!< 8 time quantum */ +} can_bts2_type; + +/** + * @brief can identifier type + */ +typedef enum +{ + CAN_ID_STANDARD = 0x00, /*!< standard Id */ + CAN_ID_EXTENDED = 0x01 /*!< extended Id */ +} can_identifier_type; + +/** + * @brief can transmission frame type + */ +typedef enum +{ + CAN_TFT_DATA = 0x00, /*!< data frame */ + CAN_TFT_REMOTE = 0x01 /*!< remote frame */ +} can_trans_frame_type; + +/** + * @brief can tx mailboxes + */ +typedef enum +{ + CAN_TX_MAILBOX0 = 0x00, /*!< can tx mailbox 0 */ + CAN_TX_MAILBOX1 = 0x01, /*!< can tx mailbox 1 */ + CAN_TX_MAILBOX2 = 0x02 /*!< can tx mailbox 2 */ +} can_tx_mailbox_num_type; + +/** + * @brief can receive fifo + */ +typedef enum +{ + CAN_RX_FIFO0 = 0x00, /*!< can fifo 0 used to receive */ + CAN_RX_FIFO1 = 0x01 /*!< can fifo 1 used to receive */ +} can_rx_fifo_num_type; + +/** + * @brief can transmit status + */ +typedef enum +{ + CAN_TX_STATUS_FAILED = 0x00, /*!< can transmission failed */ + CAN_TX_STATUS_SUCCESSFUL = 0x01, /*!< can transmission successful */ + CAN_TX_STATUS_PENDING = 0x02, /*!< can transmission pending */ + CAN_TX_STATUS_NO_EMPTY = 0x04 /*!< can transmission no empty mailbox */ +} can_transmit_status_type; + +/** + * @brief can enter doze mode status + */ +typedef enum +{ + CAN_ENTER_DOZE_FAILED = 0x00, /*!< can enter the doze mode failed */ + CAN_ENTER_DOZE_SUCCESSFUL = 0x01 /*!< can enter the doze mode successful */ +} can_enter_doze_status_type; + +/** + * @brief can quit doze mode status + */ +typedef enum +{ + CAN_QUIT_DOZE_FAILED = 0x00, /*!< can quit doze mode failed */ + CAN_QUIT_DOZE_SUCCESSFUL = 0x01 /*!< can quit doze mode successful */ +} can_quit_doze_status_type; + +/** + * @brief can message discarding rule select when overflow + */ +typedef enum +{ + CAN_DISCARDING_FIRST_RECEIVED = 0x00, /*!< can discarding the first received message */ + CAN_DISCARDING_LAST_RECEIVED = 0x01 /*!< can discarding the last received message */ +} can_msg_discarding_rule_type; + +/** + * @brief can multiple message sending sequence rule + */ +typedef enum +{ + CAN_SENDING_BY_ID = 0x00, /*!< can sending the minimum id message first*/ + CAN_SENDING_BY_REQUEST = 0x01 /*!< can sending the first request message first */ +} can_msg_sending_rule_type; + +/** + * @brief can error type record + */ +typedef enum +{ + CAN_ERRORRECORD_NOERR = 0x00, /*!< no error */ + CAN_ERRORRECORD_STUFFERR = 0x01, /*!< stuff error */ + CAN_ERRORRECORD_FORMERR = 0x02, /*!< form error */ + CAN_ERRORRECORD_ACKERR = 0x03, /*!< acknowledgment error */ + CAN_ERRORRECORD_BITRECESSIVEERR = 0x04, /*!< bit recessive error */ + CAN_ERRORRECORD_BITDOMINANTERR = 0x05, /*!< bit dominant error */ + CAN_ERRORRECORD_CRCERR = 0x06, /*!< crc error */ + CAN_ERRORRECORD_SOFTWARESETERR = 0x07 /*!< software set error */ +} can_error_record_type; + +/** + * @brief can init structure definition + */ +typedef struct +{ + can_mode_type mode_selection; /*!< specifies the can mode.*/ + + confirm_state ttc_enable; /*!< time triggered communication mode enable */ + + confirm_state aebo_enable; /*!< automatic exit bus-off enable */ + + confirm_state aed_enable; /*!< automatic exit doze mode enable */ + + confirm_state prsf_enable; /*!< prohibit retransmission when sending fails enable */ + + can_msg_discarding_rule_type mdrsel_selection; /*!< message discarding rule select when overflow */ + + can_msg_sending_rule_type mmssr_selection; /*!< multiple message sending sequence rule */ + +} can_base_type; + +/** + * @brief can baudrate structure definition + */ +typedef struct +{ + uint16_t baudrate_div; /*!< baudrate division,this parameter can be 0x001~0x1000.*/ + + can_rsaw_type rsaw_size; /*!< resynchronization adjust width */ + + can_bts1_type bts1_size; /*!< bit time segment 1 */ + + can_bts2_type bts2_size; /*!< bit time segment 2 */ + +} can_baudrate_type; + +/** + * @brief can filter init structure definition + */ +typedef struct +{ + confirm_state filter_activate_enable; /*!< enable or disable the filter activate.*/ + + can_filter_mode_type filter_mode; /*!< config the filter mode mask or list.*/ + + can_filter_fifo_type filter_fifo; /*!< config the fifo which will be assigned to the filter. */ + + uint8_t filter_number; /*!< config the filter number, parameter ranges from 0 to 13. */ + + can_filter_bit_width_type filter_bit; /*!< config the filter bit width 16bit or 32bit.*/ + + uint16_t filter_id_high; /*!< config the filter identification, for 32-bit configuration + it's high 16 bits, for 16-bit configuration it's first. */ + + uint16_t filter_id_low; /*!< config the filter identification, for 32-bit configuration + it's low 16 bits, for 16-bit configuration it's second. */ + + uint16_t filter_mask_high; /*!< config the filter mask or identification, according to the filtering mode, + for 32-bit configuration it's high 16 bits, for 16-bit configuration it's first. */ + + uint16_t filter_mask_low; /*!< config the filter mask or identification, according to the filtering mode, + for 32-bit configuration it's low 16 bits, for 16-bit configuration it's second. */ +} can_filter_init_type; + +/** + * @brief can tx message structure definition + */ +typedef struct +{ + uint32_t standard_id; /*!< specifies the 11 bits standard identifier. + this parameter can be a value between 0 to 0x7FF. */ + + uint32_t extended_id; /*!< specifies the 29 bits extended identifier. + this parameter can be a value between 0 to 0x1FFFFFFF. */ + + can_identifier_type id_type; /*!< specifies identifier type for the transmit message.*/ + + can_trans_frame_type frame_type; /*!< specifies frame type for the transmit message.*/ + + uint8_t dlc; /*!< specifies frame data length that will be transmitted. + this parameter can be a value between 0 to 8 */ + + uint8_t data[8]; /*!< contains the transmit data. it ranges from 0 to 0xFF. */ + +} can_tx_message_type; + +/** + * @brief can rx message structure definition + */ +typedef struct +{ + uint32_t standard_id; /*!< specifies the 11 bits standard identifier + this parameter can be a value between 0 to 0x7FF. */ + + uint32_t extended_id; /*!< specifies the 29 bits extended identifier. + this parameter can be a value between 0 to 0x1FFFFFFF. */ + + can_identifier_type id_type; /*!< specifies identifier type for the receive message.*/ + + can_trans_frame_type frame_type; /*!< specifies frame type for the receive message.*/ + + uint8_t dlc; /*!< specifies the frame data length that will be received. + this parameter can be a value between 0 to 8 */ + + uint8_t data[8]; /*!< contains the receive data. it ranges from 0 to 0xFF.*/ + + uint8_t filter_index; /*!< specifies the message stored in which filter + this parameter can be a value between 0 to 0xFF */ +} can_rx_message_type; + +/** + * @brief can controller area network tx mailbox + */ +typedef struct +{ + /** + * @brief can tmi register + */ + union + { + __IO uint32_t tmi; + struct + { + __IO uint32_t tmsr : 1; /* [0] */ + __IO uint32_t tmfrsel : 1; /* [1] */ + __IO uint32_t tmidsel : 1; /* [2] */ + __IO uint32_t tmeid : 18;/* [20:3] */ + __IO uint32_t tmsid : 11;/* [31:21] */ + } tmi_bit; + }; + + /** + * @brief can tmc register + */ + union + { + __IO uint32_t tmc; + struct + { + __IO uint32_t tmdtbl : 4; /* [3:0] */ + __IO uint32_t reserved1 : 4; /* [7:4] */ + __IO uint32_t tmtsten : 1; /* [8] */ + __IO uint32_t reserved2 : 7; /* [15:9] */ + __IO uint32_t tmts : 16;/* [31:16] */ + } tmc_bit; + }; + + /** + * @brief can tmdtl register + */ + union + { + __IO uint32_t tmdtl; + struct + { + __IO uint32_t tmdt0 : 8; /* [7:0] */ + __IO uint32_t tmdt1 : 8; /* [15:8] */ + __IO uint32_t tmdt2 : 8; /* [23:16] */ + __IO uint32_t tmdt3 : 8; /* [31:24] */ + } tmdtl_bit; + }; + + /** + * @brief can tmdth register + */ + union + { + __IO uint32_t tmdth; + struct + { + __IO uint32_t tmdt4 : 8; /* [7:0] */ + __IO uint32_t tmdt5 : 8; /* [15:8] */ + __IO uint32_t tmdt6 : 8; /* [23:16] */ + __IO uint32_t tmdt7 : 8; /* [31:24] */ + } tmdth_bit; + }; +} can_tx_mailbox_type; + +/** + * @brief can controller area network fifo mailbox + */ +typedef struct +{ + /** + * @brief can rfi register + */ + union + { + __IO uint32_t rfi; + struct + { + __IO uint32_t reserved1 : 1; /* [0] */ + __IO uint32_t rffri : 1; /* [1] */ + __IO uint32_t rfidi : 1; /* [2] */ + __IO uint32_t rfeid : 18;/* [20:3] */ + __IO uint32_t rfsid : 11;/* [31:21] */ + } rfi_bit; + }; + + /** + * @brief can rfc register + */ + union + { + __IO uint32_t rfc; + struct + { + __IO uint32_t rfdtl : 4; /* [3:0] */ + __IO uint32_t reserved1 : 4; /* [7:4] */ + __IO uint32_t rffmn : 8; /* [15:8] */ + __IO uint32_t rfts : 16;/* [31:16] */ + } rfc_bit; + }; + + /** + * @brief can rfdtl register + */ + union + { + __IO uint32_t rfdtl; + struct + { + __IO uint32_t rfdt0 : 8; /* [7:0] */ + __IO uint32_t rfdt1 : 8; /* [15:8] */ + __IO uint32_t rfdt2 : 8; /* [23:16] */ + __IO uint32_t rfdt3 : 8; /* [31:24] */ + } rfdtl_bit; + }; + + /** + * @brief can rfdth register + */ + union + { + __IO uint32_t rfdth; + struct + { + __IO uint32_t rfdt4 : 8; /* [7:0] */ + __IO uint32_t rfdt5 : 8; /* [15:8] */ + __IO uint32_t rfdt6 : 8; /* [23:16] */ + __IO uint32_t rfdt7 : 8; /* [31:24] */ + } rfdth_bit; + }; +} can_fifo_mailbox_type; + +/** + * @brief can controller area network filter bit register + */ +typedef struct +{ + __IO uint32_t ffdb1; + __IO uint32_t ffdb2; +} can_filter_register_type; + +/** + * @brief type define can register all + */ +typedef struct +{ + + /** + * @brief can mctrl register, offset:0x00 + */ + union + { + __IO uint32_t mctrl; + struct + { + __IO uint32_t fzen : 1; /* [0] */ + __IO uint32_t dzen : 1; /* [1] */ + __IO uint32_t mmssr : 1; /* [2] */ + __IO uint32_t mdrsel : 1; /* [3] */ + __IO uint32_t prsfen : 1; /* [4] */ + __IO uint32_t aeden : 1; /* [5] */ + __IO uint32_t aeboen : 1; /* [6] */ + __IO uint32_t ttcen : 1; /* [7] */ + __IO uint32_t reserved1 : 7; /* [14:8] */ + __IO uint32_t sprst : 1; /* [15] */ + __IO uint32_t ptd : 1; /* [16] */ + __IO uint32_t reserved2 : 15;/*[31:17] */ + } mctrl_bit; + }; + + /** + * @brief can msts register, offset:0x04 + */ + union + { + __IO uint32_t msts; + struct + { + __IO uint32_t fzc : 1; /* [0] */ + __IO uint32_t dzc : 1; /* [1] */ + __IO uint32_t eoif : 1; /* [2] */ + __IO uint32_t qdzif : 1; /* [3] */ + __IO uint32_t edzif : 1; /* [4] */ + __IO uint32_t reserved1 : 3; /* [7:5] */ + __IO uint32_t cuss : 1; /* [8] */ + __IO uint32_t curs : 1; /* [9] */ + __IO uint32_t lsamprx : 1; /* [10] */ + __IO uint32_t realrx : 1; /* [11] */ + __IO uint32_t reserved2 : 20;/*[31:12] */ + } msts_bit; + }; + + /** + * @brief can tsts register, offset:0x08 + */ + union + { + __IO uint32_t tsts; + struct + { + __IO uint32_t tm0tcf : 1; /* [0] */ + __IO uint32_t tm0tsf : 1; /* [1] */ + __IO uint32_t tm0alf : 1; /* [2] */ + __IO uint32_t tm0tef : 1; /* [3] */ + __IO uint32_t reserved1 : 3; /* [6:4] */ + __IO uint32_t tm0ct : 1; /* [7] */ + __IO uint32_t tm1tcf : 1; /* [8] */ + __IO uint32_t tm1tsf : 1; /* [9] */ + __IO uint32_t tm1alf : 1; /* [10] */ + __IO uint32_t tm1tef : 1; /* [11] */ + __IO uint32_t reserved2 : 3; /* [14:12] */ + __IO uint32_t tm1ct : 1; /* [15] */ + __IO uint32_t tm2tcf : 1; /* [16] */ + __IO uint32_t tm2tsf : 1; /* [17] */ + __IO uint32_t tm2alf : 1; /* [18] */ + __IO uint32_t tm2tef : 1; /* [19] */ + __IO uint32_t reserved3 : 3; /* [22:20] */ + __IO uint32_t tm2ct : 1; /* [23] */ + __IO uint32_t tmnr : 2; /* [25:24] */ + __IO uint32_t tm0ef : 1; /* [26] */ + __IO uint32_t tm1ef : 1; /* [27] */ + __IO uint32_t tm2ef : 1; /* [28] */ + __IO uint32_t tm0lpf : 1; /* [29] */ + __IO uint32_t tm1lpf : 1; /* [30] */ + __IO uint32_t tm2lpf : 1; /* [31] */ + } tsts_bit; + }; + + /** + * @brief can rf0 register, offset:0x0C + */ + union + { + __IO uint32_t rf0; + struct + { + __IO uint32_t rf0mn : 2; /* [1:0] */ + __IO uint32_t reserved1 : 1; /* [2] */ + __IO uint32_t rf0ff : 1; /* [3] */ + __IO uint32_t rf0of : 1; /* [4] */ + __IO uint32_t rf0r : 1; /* [5] */ + __IO uint32_t reserved2 : 26;/* [31:6] */ + } rf0_bit; + }; + + /** + * @brief can rf1 register, offset:0x10 + */ + union + { + __IO uint32_t rf1; + struct + { + __IO uint32_t rf1mn : 2; /* [1:0] */ + __IO uint32_t reserved1 : 1; /* [2] */ + __IO uint32_t rf1ff : 1; /* [3] */ + __IO uint32_t rf1of : 1; /* [4] */ + __IO uint32_t rf1r : 1; /* [5] */ + __IO uint32_t reserved2 : 26;/* [31:6] */ + } rf1_bit; + }; + + /** + * @brief can inten register, offset:0x14 + */ + union + { + __IO uint32_t inten; + struct + { + __IO uint32_t tcien : 1; /* [0] */ + __IO uint32_t rf0mien : 1; /* [1] */ + __IO uint32_t rf0fien : 1; /* [2] */ + __IO uint32_t rf0oien : 1; /* [3] */ + __IO uint32_t rf1mien : 1; /* [4] */ + __IO uint32_t rf1fien : 1; /* [5] */ + __IO uint32_t rf1oien : 1; /* [6] */ + __IO uint32_t reserved1 : 1; /* [7] */ + __IO uint32_t eaien : 1; /* [8] */ + __IO uint32_t epien : 1; /* [9] */ + __IO uint32_t boien : 1; /* [10] */ + __IO uint32_t etrien : 1; /* [11] */ + __IO uint32_t reserved2 : 3; /* [14:12] */ + __IO uint32_t eoien : 1; /* [15] */ + __IO uint32_t qdzien : 1; /* [16] */ + __IO uint32_t edzien : 1; /* [17] */ + __IO uint32_t reserved3 : 14;/* [31:18] */ + } inten_bit; + }; + + /** + * @brief can ests register, offset:0x18 + */ + union + { + __IO uint32_t ests; + struct + { + __IO uint32_t eaf : 1; /* [0] */ + __IO uint32_t epf : 1; /* [1] */ + __IO uint32_t bof : 1; /* [2] */ + __IO uint32_t reserved1 : 1; /* [3] */ + __IO uint32_t etr : 3; /* [6:4] */ + __IO uint32_t reserved2 : 9; /* [15:7] */ + __IO uint32_t tec : 8; /* [23:16] */ + __IO uint32_t rec : 8; /* [31:24] */ + } ests_bit; + }; + + /** + * @brief can btmg register, offset:0x1C + */ + union + { + __IO uint32_t btmg; + struct + { + __IO uint32_t brdiv : 12;/* [11:0] */ + __IO uint32_t reserved1 : 4; /* [15:12] */ + __IO uint32_t bts1 : 4; /* [19:16] */ + __IO uint32_t bts2 : 3; /* [22:20] */ + __IO uint32_t reserved2 : 1; /* [23] */ + __IO uint32_t rsaw : 2; /* [25:24] */ + __IO uint32_t reserved3 : 4; /* [29:26] */ + __IO uint32_t lben : 1; /* [30] */ + __IO uint32_t loen : 1; /* [31] */ + } btmg_bit; + }; + + /** + * @brief can reserved register, offset:0x20~0x17C + */ + __IO uint32_t reserved1[88]; + + /** + * @brief can controller area network tx mailbox register, offset:0x180~0x1AC + */ + can_tx_mailbox_type tx_mailbox[3]; + + /** + * @brief can controller area network fifo mailbox register, offset:0x1B0~0x1CC + */ + can_fifo_mailbox_type fifo_mailbox[2]; + + /** + * @brief can reserved register, offset:0x1D0~0x1FC + */ + __IO uint32_t reserved2[12]; + + /** + * @brief can fctrl register, offset:0x200 + */ + union + { + __IO uint32_t fctrl; + struct + { + __IO uint32_t fcs : 1; /* [0] */ + __IO uint32_t reserved1 : 31;/* [31:1] */ + } fctrl_bit; + }; + + /** + * @brief can fmcfg register, offset:0x204 + */ + union + { + __IO uint32_t fmcfg; + struct + { + __IO uint32_t fmsel0 : 1; /* [0] */ + __IO uint32_t fmsel1 : 1; /* [1] */ + __IO uint32_t fmsel2 : 1; /* [2] */ + __IO uint32_t fmsel3 : 1; /* [3] */ + __IO uint32_t fmsel4 : 1; /* [4] */ + __IO uint32_t fmsel5 : 1; /* [5] */ + __IO uint32_t fmsel6 : 1; /* [6] */ + __IO uint32_t fmsel7 : 1; /* [7] */ + __IO uint32_t fmsel8 : 1; /* [8] */ + __IO uint32_t fmsel9 : 1; /* [9] */ + __IO uint32_t fmsel10 : 1; /* [10] */ + __IO uint32_t fmsel11 : 1; /* [11] */ + __IO uint32_t fmsel12 : 1; /* [12] */ + __IO uint32_t fmsel13 : 1; /* [13] */ + __IO uint32_t fmsel14 : 1; /* [14] */ + __IO uint32_t fmsel15 : 1; /* [15] */ + __IO uint32_t fmsel16 : 1; /* [16] */ + __IO uint32_t fmsel17 : 1; /* [17] */ + __IO uint32_t fmsel18 : 1; /* [18] */ + __IO uint32_t fmsel19 : 1; /* [19] */ + __IO uint32_t fmsel20 : 1; /* [20] */ + __IO uint32_t fmsel21 : 1; /* [21] */ + __IO uint32_t fmsel22 : 1; /* [22] */ + __IO uint32_t fmsel23 : 1; /* [23] */ + __IO uint32_t fmsel24 : 1; /* [24] */ + __IO uint32_t fmsel25 : 1; /* [25] */ + __IO uint32_t fmsel26 : 1; /* [26] */ + __IO uint32_t fmsel27 : 1; /* [27] */ + __IO uint32_t reserved1 : 4;/* [31:28] */ + } fmcfg_bit; + }; + + /** + * @brief can reserved register, offset:0x208 + */ + __IO uint32_t reserved3; + + /** + * @brief can fbwcfg register, offset:0x20C + */ + union + { + __IO uint32_t fbwcfg; + struct + { + __IO uint32_t fbwsel0 : 1; /* [0] */ + __IO uint32_t fbwsel1 : 1; /* [1] */ + __IO uint32_t fbwsel2 : 1; /* [2] */ + __IO uint32_t fbwsel3 : 1; /* [3] */ + __IO uint32_t fbwsel4 : 1; /* [4] */ + __IO uint32_t fbwsel5 : 1; /* [5] */ + __IO uint32_t fbwsel6 : 1; /* [6] */ + __IO uint32_t fbwsel7 : 1; /* [7] */ + __IO uint32_t fbwsel8 : 1; /* [8] */ + __IO uint32_t fbwsel9 : 1; /* [9] */ + __IO uint32_t fbwsel10 : 1; /* [10] */ + __IO uint32_t fbwsel11 : 1; /* [11] */ + __IO uint32_t fbwsel12 : 1; /* [12] */ + __IO uint32_t fbwsel13 : 1; /* [13] */ + __IO uint32_t fbwsel14 : 1; /* [14] */ + __IO uint32_t fbwsel15 : 1; /* [15] */ + __IO uint32_t fbwsel16 : 1; /* [16] */ + __IO uint32_t fbwsel17 : 1; /* [17] */ + __IO uint32_t fbwsel18 : 1; /* [18] */ + __IO uint32_t fbwsel19 : 1; /* [19] */ + __IO uint32_t fbwsel20 : 1; /* [20] */ + __IO uint32_t fbwsel21 : 1; /* [21] */ + __IO uint32_t fbwsel22 : 1; /* [22] */ + __IO uint32_t fbwsel23 : 1; /* [23] */ + __IO uint32_t fbwsel24 : 1; /* [24] */ + __IO uint32_t fbwsel25 : 1; /* [25] */ + __IO uint32_t fbwsel26 : 1; /* [26] */ + __IO uint32_t fbwsel27 : 1; /* [27] */ + __IO uint32_t reserved1 : 4;/* [31:28] */ + } fbwcfg_bit; + }; + + /** + * @brief can reserved register, offset:0x210 + */ + __IO uint32_t reserved4; + + /** + * @brief can frf register, offset:0x214 + */ + union + { + __IO uint32_t frf; + struct + { + __IO uint32_t frfsel0 : 1; /* [0] */ + __IO uint32_t frfsel1 : 1; /* [1] */ + __IO uint32_t frfsel2 : 1; /* [2] */ + __IO uint32_t frfsel3 : 1; /* [3] */ + __IO uint32_t frfsel4 : 1; /* [4] */ + __IO uint32_t frfsel5 : 1; /* [5] */ + __IO uint32_t frfsel6 : 1; /* [6] */ + __IO uint32_t frfsel7 : 1; /* [7] */ + __IO uint32_t frfsel8 : 1; /* [8] */ + __IO uint32_t frfsel9 : 1; /* [9] */ + __IO uint32_t frfsel10 : 1; /* [10] */ + __IO uint32_t frfsel11 : 1; /* [11] */ + __IO uint32_t frfsel12 : 1; /* [12] */ + __IO uint32_t frfsel13 : 1; /* [13] */ + __IO uint32_t frfsel14 : 1; /* [14] */ + __IO uint32_t frfsel15 : 1; /* [15] */ + __IO uint32_t frfsel16 : 1; /* [16] */ + __IO uint32_t frfsel17 : 1; /* [17] */ + __IO uint32_t frfsel18 : 1; /* [18] */ + __IO uint32_t frfsel19 : 1; /* [19] */ + __IO uint32_t frfsel20 : 1; /* [20] */ + __IO uint32_t frfsel21 : 1; /* [21] */ + __IO uint32_t frfsel22 : 1; /* [22] */ + __IO uint32_t frfsel23 : 1; /* [23] */ + __IO uint32_t frfsel24 : 1; /* [24] */ + __IO uint32_t frfsel25 : 1; /* [25] */ + __IO uint32_t frfsel26 : 1; /* [26] */ + __IO uint32_t frfsel27 : 1; /* [27] */ + __IO uint32_t reserved1 : 4;/* [31:28] */ + } frf_bit; + }; + + /** + * @brief can reserved register, offset:0x218 + */ + __IO uint32_t reserved5; + + /** + * @brief can facfg register, offset:0x21C + */ + union + { + __IO uint32_t facfg; + struct + { + __IO uint32_t faen0 : 1; /* [0] */ + __IO uint32_t faen1 : 1; /* [1] */ + __IO uint32_t faen2 : 1; /* [2] */ + __IO uint32_t faen3 : 1; /* [3] */ + __IO uint32_t faen4 : 1; /* [4] */ + __IO uint32_t faen5 : 1; /* [5] */ + __IO uint32_t faen6 : 1; /* [6] */ + __IO uint32_t faen7 : 1; /* [7] */ + __IO uint32_t faen8 : 1; /* [8] */ + __IO uint32_t faen9 : 1; /* [9] */ + __IO uint32_t faen10 : 1; /* [10] */ + __IO uint32_t faen11 : 1; /* [11] */ + __IO uint32_t faen12 : 1; /* [12] */ + __IO uint32_t faen13 : 1; /* [13] */ + __IO uint32_t faen14 : 1; /* [14] */ + __IO uint32_t faen15 : 1; /* [15] */ + __IO uint32_t faen16 : 1; /* [16] */ + __IO uint32_t faen17 : 1; /* [17] */ + __IO uint32_t faen18 : 1; /* [18] */ + __IO uint32_t faen19 : 1; /* [19] */ + __IO uint32_t faen20 : 1; /* [20] */ + __IO uint32_t faen21 : 1; /* [21] */ + __IO uint32_t faen22 : 1; /* [22] */ + __IO uint32_t faen23 : 1; /* [23] */ + __IO uint32_t faen24 : 1; /* [24] */ + __IO uint32_t faen25 : 1; /* [25] */ + __IO uint32_t faen26 : 1; /* [26] */ + __IO uint32_t faen27 : 1; /* [27] */ + __IO uint32_t reserved1 : 4;/* [31:28] */ + } facfg_bit; + }; + + /** + * @brief can reserved register, offset:0x220~0x23C + */ + __IO uint32_t reserved6[8]; + + /** + * @brief can ffb register, offset:0x240~0x2AC + */ + can_filter_register_type ffb[28]; +} can_type; + +/** + * @} + */ + +#define CAN1 ((can_type *) CAN1_BASE) +#define CAN2 ((can_type *) CAN2_BASE) + +/** @defgroup CAN_exported_functions + * @{ + */ + +void can_reset(can_type* can_x); +void can_baudrate_default_para_init(can_baudrate_type* can_baudrate_struct); +error_status can_baudrate_set(can_type* can_x, can_baudrate_type* can_baudrate_struct); +void can_default_para_init(can_base_type* can_base_struct); +error_status can_base_init(can_type* can_x, can_base_type* can_base_struct); +void can_filter_default_para_init(can_filter_init_type* can_filter_init_struct); +void can_filter_init(can_type* can_x, can_filter_init_type* can_filter_init_struct); +void can_debug_transmission_prohibit(can_type* can_x, confirm_state new_state); +void can_ttc_mode_enable(can_type* can_x, confirm_state new_state); +uint8_t can_message_transmit(can_type* can_x, can_tx_message_type* tx_message_struct); +can_transmit_status_type can_transmit_status_get(can_type* can_x, can_tx_mailbox_num_type transmit_mailbox); +void can_transmit_cancel(can_type* can_x, can_tx_mailbox_num_type transmit_mailbox); +void can_message_receive(can_type* can_x, can_rx_fifo_num_type fifo_number, can_rx_message_type* rx_message_struct); +void can_receive_fifo_release(can_type* can_x, can_rx_fifo_num_type fifo_number); +uint8_t can_receive_message_pending_get(can_type* can_x, can_rx_fifo_num_type fifo_number); +error_status can_operating_mode_set(can_type* can_x, can_operating_mode_type can_operating_mode); +can_enter_doze_status_type can_doze_mode_enter(can_type* can_x); +can_quit_doze_status_type can_doze_mode_exit(can_type* can_x); +can_error_record_type can_error_type_record_get(can_type* can_x); +uint8_t can_receive_error_counter_get(can_type* can_x); +uint8_t can_transmit_error_counter_get(can_type* can_x); +void can_interrupt_enable(can_type* can_x, uint32_t can_int, confirm_state new_state); +flag_status can_interrupt_flag_get(can_type* can_x, uint32_t can_flag); +flag_status can_flag_get(can_type* can_x, uint32_t can_flag); +void can_flag_clear(can_type* can_x, uint32_t can_flag); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_crc.h b/armlib/at32_sys/drivers/inc/at32f435_437_crc.h new file mode 100644 index 000000000..d97b3846d --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_crc.h @@ -0,0 +1,198 @@ +/** + ************************************************************************** + * @file at32f435_437_crc.h + * @brief at32f435_437 crc header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_CRC_H +#define __AT32F435_437_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/** @defgroup CRC_exported_types + * @{ + */ + +/** + * @brief crc reverse input data + */ +typedef enum +{ + CRC_REVERSE_INPUT_NO_AFFECTE = 0x00, /*!< input data no reverse */ + CRC_REVERSE_INPUT_BY_BYTE = 0x01, /*!< input data reverse by byte */ + CRC_REVERSE_INPUT_BY_HALFWORD = 0x02, /*!< input data reverse by half word */ + CRC_REVERSE_INPUT_BY_WORD = 0x03 /*!< input data reverse by word */ +} crc_reverse_input_type; + +/** + * @brief crc reverse output data + */ +typedef enum +{ + CRC_REVERSE_OUTPUT_NO_AFFECTE = 0x00, /*!< output data no reverse */ + CRC_REVERSE_OUTPUT_DATA = 0x01 /*!< output data reverse by word */ +} crc_reverse_output_type; + +/** + * @brief crc polynomial size + */ +typedef enum +{ + CRC_POLY_SIZE_32B = 0x00, /*!< polynomial size 32 bits */ + CRC_POLY_SIZE_16B = 0x01, /*!< polynomial size 16 bits */ + CRC_POLY_SIZE_8B = 0x02, /*!< polynomial size 8 bits */ + CRC_POLY_SIZE_7B = 0x03 /*!< polynomial size 7 bits */ +} crc_poly_size_type; + +/** + * @brief type define crc register all + */ +typedef struct +{ + /** + * @brief crc dt register, offset:0x00 + */ + union + { + __IO uint32_t dt; + struct + { + __IO uint32_t dt : 32; /* [31:0] */ + } dt_bit; + }; + + /** + * @brief crc cdt register, offset:0x04 + */ + union + { + __IO uint32_t cdt; + struct + { + __IO uint32_t cdt : 8 ; /* [7:0] */ + __IO uint32_t reserved1 : 24 ;/* [31:8] */ + } cdt_bit; + }; + + /** + * @brief crc ctrl register, offset:0x08 + */ + union + { + __IO uint32_t ctrl; + struct + { + __IO uint32_t rst : 1 ; /* [0] */ + __IO uint32_t reserved1 : 2 ; /* [2:1] */ + __IO uint32_t poly_size : 2 ; /* [4:3] */ + __IO uint32_t revid : 2 ; /* [6:5] */ + __IO uint32_t revod : 1 ; /* [7] */ + __IO uint32_t reserved2 : 24 ;/* [31:8] */ + } ctrl_bit; + }; + + /** + * @brief crm reserved1 register, offset:0x0C + */ + __IO uint32_t reserved1; + + /** + * @brief crc idt register, offset:0x10 + */ + union + { + __IO uint32_t idt; + struct + { + __IO uint32_t idt : 32; /* [31:0] */ + } idt_bit; + }; + + /** + * @brief crc polynomial register, offset:0x14 + */ + union + { + __IO uint32_t poly; + struct + { + __IO uint32_t poly : 32; /* [31:0] */ + } poly_bit; + }; + +} crc_type; + +/** + * @} + */ + +#define CRC ((crc_type *) CRC_BASE) + +/** @defgroup CRC_exported_functions + * @{ + */ + +void crc_data_reset(void); +uint32_t crc_one_word_calculate(uint32_t data); +uint32_t crc_block_calculate(uint32_t *pbuffer, uint32_t length); +uint32_t crc_data_get(void); +void crc_common_data_set(uint8_t cdt_value); +uint8_t crc_common_data_get(void); +void crc_init_data_set(uint32_t value); +void crc_reverse_input_data_set(crc_reverse_input_type value); +void crc_reverse_output_data_set(crc_reverse_output_type value); +void crc_poly_value_set(uint32_t value); +uint32_t crc_poly_value_get(void); +void crc_poly_size_set(crc_poly_size_type size); +crc_poly_size_type crc_poly_size_get(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_crm.h b/armlib/at32_sys/drivers/inc/at32f435_437_crm.h new file mode 100644 index 000000000..4e24d97e1 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_crm.h @@ -0,0 +1,1575 @@ +/** + ************************************************************************** + * @file at32f435_437_crm.h + * @brief at32f435_437 crm header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_CRM_H +#define __AT32F435_437_CRM_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup CRM + * @{ + */ + +#define CRM_REG(value) PERIPH_REG(CRM_BASE, value) +#define CRM_REG_BIT(value) PERIPH_REG_BIT(value) + +/** @defgroup CRM_flags_definition + * @brief crm flag + * @{ + */ + +#define CRM_HICK_STABLE_FLAG MAKE_VALUE(0x00, 1) /*!< high speed internal clock stable flag */ +#define CRM_HEXT_STABLE_FLAG MAKE_VALUE(0x00, 17) /*!< high speed external crystal stable flag */ +#define CRM_PLL_STABLE_FLAG MAKE_VALUE(0x00, 25) /*!< phase locking loop stable flag */ +#define CRM_LEXT_STABLE_FLAG MAKE_VALUE(0x70, 1) /*!< low speed external crystal stable flag */ +#define CRM_LICK_STABLE_FLAG MAKE_VALUE(0x74, 1) /*!< low speed internal clock stable flag */ +#define CRM_ALL_RESET_FLAG MAKE_VALUE(0x74, 24) /*!< all reset flag */ +#define CRM_NRST_RESET_FLAG MAKE_VALUE(0x74, 26) /*!< nrst pin reset flag */ +#define CRM_POR_RESET_FLAG MAKE_VALUE(0x74, 27) /*!< power on reset flag */ +#define CRM_SW_RESET_FLAG MAKE_VALUE(0x74, 28) /*!< software reset flag */ +#define CRM_WDT_RESET_FLAG MAKE_VALUE(0x74, 29) /*!< watchdog timer reset flag */ +#define CRM_WWDT_RESET_FLAG MAKE_VALUE(0x74, 30) /*!< window watchdog timer reset flag */ +#define CRM_LOWPOWER_RESET_FLAG MAKE_VALUE(0x74, 31) /*!< low-power reset flag */ +#define CRM_LICK_READY_INT_FLAG MAKE_VALUE(0x0C, 0) /*!< low speed internal clock stable interrupt ready flag */ +#define CRM_LEXT_READY_INT_FLAG MAKE_VALUE(0x0C, 1) /*!< low speed external crystal stable interrupt ready flag */ +#define CRM_HICK_READY_INT_FLAG MAKE_VALUE(0x0C, 2) /*!< high speed internal clock stable interrupt ready flag */ +#define CRM_HEXT_READY_INT_FLAG MAKE_VALUE(0x0C, 3) /*!< high speed external crystal stable interrupt ready flag */ +#define CRM_PLL_READY_INT_FLAG MAKE_VALUE(0x0C, 4) /*!< phase locking loop stable interrupt ready flag */ +#define CRM_CLOCK_FAILURE_INT_FLAG MAKE_VALUE(0x0C, 7) /*!< clock failure interrupt ready flag */ + +/** + * @} + */ + +/** @defgroup CRM_interrupts_definition + * @brief crm interrupt + * @{ + */ + +#define CRM_LICK_STABLE_INT ((uint32_t)0x00000100) /*!< low speed internal clock stable interrupt */ +#define CRM_LEXT_STABLE_INT ((uint32_t)0x00000200) /*!< low speed external crystal stable interrupt */ +#define CRM_HICK_STABLE_INT ((uint32_t)0x00000400) /*!< high speed internal clock stable interrupt */ +#define CRM_HEXT_STABLE_INT ((uint32_t)0x00000800) /*!< high speed external crystal stable interrupt */ +#define CRM_PLL_STABLE_INT ((uint32_t)0x00001000) /*!< phase locking loop stable interrupt */ +#define CRM_CLOCK_FAILURE_INT ((uint32_t)0x00800000) /*!< clock failure interrupt */ + +/** + * @} + */ + +/** @defgroup CRM_exported_types + * @{ + */ + +/** + * @brief crm periph clock + */ +typedef enum +{ +#if defined (AT32F435xx) + /* ahb periph1 */ + CRM_GPIOA_PERIPH_CLOCK = MAKE_VALUE(0x30, 0), /*!< gpioa periph clock */ + CRM_GPIOB_PERIPH_CLOCK = MAKE_VALUE(0x30, 1), /*!< gpiob periph clock */ + CRM_GPIOC_PERIPH_CLOCK = MAKE_VALUE(0x30, 2), /*!< gpioc periph clock */ + CRM_GPIOD_PERIPH_CLOCK = MAKE_VALUE(0x30, 3), /*!< gpiod periph clock */ + CRM_GPIOE_PERIPH_CLOCK = MAKE_VALUE(0x30, 4), /*!< gpioe periph clock */ + CRM_GPIOF_PERIPH_CLOCK = MAKE_VALUE(0x30, 5), /*!< gpiof periph clock */ + CRM_GPIOG_PERIPH_CLOCK = MAKE_VALUE(0x30, 6), /*!< gpiog periph clock */ + CRM_GPIOH_PERIPH_CLOCK = MAKE_VALUE(0x30, 7), /*!< gpioh periph clock */ + CRM_CRC_PERIPH_CLOCK = MAKE_VALUE(0x30, 12), /*!< crc periph clock */ + CRM_EDMA_PERIPH_CLOCK = MAKE_VALUE(0x30, 21), /*!< edma periph clock */ + CRM_DMA1_PERIPH_CLOCK = MAKE_VALUE(0x30, 22), /*!< dma1 periph clock */ + CRM_DMA2_PERIPH_CLOCK = MAKE_VALUE(0x30, 24), /*!< dma2 periph clock */ + CRM_OTGFS2_PERIPH_CLOCK = MAKE_VALUE(0x30, 29), /*!< otgfs2 periph clock */ + /* ahb periph2 */ + CRM_DVP_PERIPH_CLOCK = MAKE_VALUE(0x34, 0), /*!< dvp periph clock */ + CRM_OTGFS1_PERIPH_CLOCK = MAKE_VALUE(0x34, 7), /*!< otgfs1 periph clock */ + CRM_SDIO1_PERIPH_CLOCK = MAKE_VALUE(0x34, 15), /*!< sdio1 periph clock */ + /* ahb periph3 */ + CRM_XMC_PERIPH_CLOCK = MAKE_VALUE(0x38, 0), /*!< xmc periph clock */ + CRM_QSPI1_PERIPH_CLOCK = MAKE_VALUE(0x38, 1), /*!< qspi1 periph clock */ + CRM_QSPI2_PERIPH_CLOCK = MAKE_VALUE(0x38, 14), /*!< qspi2 periph clock */ + CRM_SDIO2_PERIPH_CLOCK = MAKE_VALUE(0x38, 15), /*!< sdio2 periph clock */ + /* apb1 periph */ + CRM_TMR2_PERIPH_CLOCK = MAKE_VALUE(0x40, 0), /*!< tmr2 periph clock */ + CRM_TMR3_PERIPH_CLOCK = MAKE_VALUE(0x40, 1), /*!< tmr3 periph clock */ + CRM_TMR4_PERIPH_CLOCK = MAKE_VALUE(0x40, 2), /*!< tmr4 periph clock */ + CRM_TMR5_PERIPH_CLOCK = MAKE_VALUE(0x40, 3), /*!< tmr5 periph clock */ + CRM_TMR6_PERIPH_CLOCK = MAKE_VALUE(0x40, 4), /*!< tmr6 periph clock */ + CRM_TMR7_PERIPH_CLOCK = MAKE_VALUE(0x40, 5), /*!< tmr7 periph clock */ + CRM_TMR12_PERIPH_CLOCK = MAKE_VALUE(0x40, 6), /*!< tmr12 periph clock */ + CRM_TMR13_PERIPH_CLOCK = MAKE_VALUE(0x40, 7), /*!< tmr13 periph clock */ + CRM_TMR14_PERIPH_CLOCK = MAKE_VALUE(0x40, 8), /*!< tmr14 periph clock */ + CRM_WWDT_PERIPH_CLOCK = MAKE_VALUE(0x40, 11), /*!< wwdt periph clock */ + CRM_SPI2_PERIPH_CLOCK = MAKE_VALUE(0x40, 14), /*!< spi2 periph clock */ + CRM_SPI3_PERIPH_CLOCK = MAKE_VALUE(0x40, 15), /*!< spi3 periph clock */ + CRM_USART2_PERIPH_CLOCK = MAKE_VALUE(0x40, 17), /*!< usart2 periph clock */ + CRM_USART3_PERIPH_CLOCK = MAKE_VALUE(0x40, 18), /*!< usart3 periph clock */ + CRM_UART4_PERIPH_CLOCK = MAKE_VALUE(0x40, 19), /*!< uart4 periph clock */ + CRM_UART5_PERIPH_CLOCK = MAKE_VALUE(0x40, 20), /*!< uart5 periph clock */ + CRM_I2C1_PERIPH_CLOCK = MAKE_VALUE(0x40, 21), /*!< i2c1 periph clock */ + CRM_I2C2_PERIPH_CLOCK = MAKE_VALUE(0x40, 22), /*!< i2c2 periph clock */ + CRM_I2C3_PERIPH_CLOCK = MAKE_VALUE(0x40, 23), /*!< i2c3 periph clock */ + CRM_CAN1_PERIPH_CLOCK = MAKE_VALUE(0x40, 25), /*!< can1 periph clock */ + CRM_CAN2_PERIPH_CLOCK = MAKE_VALUE(0x40, 26), /*!< can2 periph clock */ + CRM_PWC_PERIPH_CLOCK = MAKE_VALUE(0x40, 28), /*!< pwc periph clock */ + CRM_DAC_PERIPH_CLOCK = MAKE_VALUE(0x40, 29), /*!< dac periph clock */ + CRM_UART7_PERIPH_CLOCK = MAKE_VALUE(0x40, 30), /*!< uart7 periph clock */ + CRM_UART8_PERIPH_CLOCK = MAKE_VALUE(0x40, 31), /*!< uart8 periph clock */ + /* apb2 periph */ + CRM_TMR1_PERIPH_CLOCK = MAKE_VALUE(0x44, 0), /*!< tmr1 periph clock */ + CRM_TMR8_PERIPH_CLOCK = MAKE_VALUE(0x44, 1), /*!< tmr8 periph clock */ + CRM_USART1_PERIPH_CLOCK = MAKE_VALUE(0x44, 4), /*!< usart1 periph clock */ + CRM_USART6_PERIPH_CLOCK = MAKE_VALUE(0x44, 5), /*!< usart6 periph clock */ + CRM_ADC1_PERIPH_CLOCK = MAKE_VALUE(0x44, 8), /*!< adc1 periph clock */ + CRM_ADC2_PERIPH_CLOCK = MAKE_VALUE(0x44, 9), /*!< adc2 periph clock */ + CRM_ADC3_PERIPH_CLOCK = MAKE_VALUE(0x44, 10), /*!< adc3 periph clock */ + CRM_SPI1_PERIPH_CLOCK = MAKE_VALUE(0x44, 12), /*!< spi1 periph clock */ + CRM_SPI4_PERIPH_CLOCK = MAKE_VALUE(0x44, 13), /*!< spi4 periph clock */ + CRM_SCFG_PERIPH_CLOCK = MAKE_VALUE(0x44, 14), /*!< scfg periph clock */ + CRM_TMR9_PERIPH_CLOCK = MAKE_VALUE(0x44, 16), /*!< tmr9 periph clock */ + CRM_TMR10_PERIPH_CLOCK = MAKE_VALUE(0x44, 17), /*!< tmr10 periph clock */ + CRM_TMR11_PERIPH_CLOCK = MAKE_VALUE(0x44, 18), /*!< tmr11 periph clock */ + CRM_TMR20_PERIPH_CLOCK = MAKE_VALUE(0x44, 20), /*!< tmr20 periph clock */ + CRM_ACC_PERIPH_CLOCK = MAKE_VALUE(0x44, 29) /*!< acc periph clock */ +#endif + +#if defined (AT32F437xx) + /* ahb periph1 */ + CRM_GPIOA_PERIPH_CLOCK = MAKE_VALUE(0x30, 0), /*!< gpioa periph clock */ + CRM_GPIOB_PERIPH_CLOCK = MAKE_VALUE(0x30, 1), /*!< gpiob periph clock */ + CRM_GPIOC_PERIPH_CLOCK = MAKE_VALUE(0x30, 2), /*!< gpioc periph clock */ + CRM_GPIOD_PERIPH_CLOCK = MAKE_VALUE(0x30, 3), /*!< gpiod periph clock */ + CRM_GPIOE_PERIPH_CLOCK = MAKE_VALUE(0x30, 4), /*!< gpioe periph clock */ + CRM_GPIOF_PERIPH_CLOCK = MAKE_VALUE(0x30, 5), /*!< gpiof periph clock */ + CRM_GPIOG_PERIPH_CLOCK = MAKE_VALUE(0x30, 6), /*!< gpiog periph clock */ + CRM_GPIOH_PERIPH_CLOCK = MAKE_VALUE(0x30, 7), /*!< gpioh periph clock */ + CRM_CRC_PERIPH_CLOCK = MAKE_VALUE(0x30, 12), /*!< crc periph clock */ + CRM_EDMA_PERIPH_CLOCK = MAKE_VALUE(0x30, 21), /*!< edma periph clock */ + CRM_DMA1_PERIPH_CLOCK = MAKE_VALUE(0x30, 22), /*!< dma1 periph clock */ + CRM_DMA2_PERIPH_CLOCK = MAKE_VALUE(0x30, 24), /*!< dma2 periph clock */ + CRM_EMAC_PERIPH_CLOCK = MAKE_VALUE(0x30, 25), /*!< emac periph clock */ + CRM_EMACTX_PERIPH_CLOCK = MAKE_VALUE(0x30, 26), /*!< emac tx periph clock */ + CRM_EMACRX_PERIPH_CLOCK = MAKE_VALUE(0x30, 27), /*!< emac rx periph clock */ + CRM_EMACPTP_PERIPH_CLOCK = MAKE_VALUE(0x30, 28), /*!< emac ptp periph clock */ + CRM_OTGFS2_PERIPH_CLOCK = MAKE_VALUE(0x30, 29), /*!< otgfs2 periph clock */ + /* ahb periph2 */ + CRM_DVP_PERIPH_CLOCK = MAKE_VALUE(0x34, 0), /*!< dvp periph clock */ + CRM_OTGFS1_PERIPH_CLOCK = MAKE_VALUE(0x34, 7), /*!< otgfs1 periph clock */ + CRM_SDIO1_PERIPH_CLOCK = MAKE_VALUE(0x34, 15), /*!< sdio1 periph clock */ + /* ahb periph3 */ + CRM_XMC_PERIPH_CLOCK = MAKE_VALUE(0x38, 0), /*!< xmc periph clock */ + CRM_QSPI1_PERIPH_CLOCK = MAKE_VALUE(0x38, 1), /*!< qspi1 periph clock */ + CRM_QSPI2_PERIPH_CLOCK = MAKE_VALUE(0x38, 14), /*!< qspi2 periph clock */ + CRM_SDIO2_PERIPH_CLOCK = MAKE_VALUE(0x38, 15), /*!< sdio2 periph clock */ + /* apb1 periph */ + CRM_TMR2_PERIPH_CLOCK = MAKE_VALUE(0x40, 0), /*!< tmr2 periph clock */ + CRM_TMR3_PERIPH_CLOCK = MAKE_VALUE(0x40, 1), /*!< tmr3 periph clock */ + CRM_TMR4_PERIPH_CLOCK = MAKE_VALUE(0x40, 2), /*!< tmr4 periph clock */ + CRM_TMR5_PERIPH_CLOCK = MAKE_VALUE(0x40, 3), /*!< tmr5 periph clock */ + CRM_TMR6_PERIPH_CLOCK = MAKE_VALUE(0x40, 4), /*!< tmr6 periph clock */ + CRM_TMR7_PERIPH_CLOCK = MAKE_VALUE(0x40, 5), /*!< tmr7 periph clock */ + CRM_TMR12_PERIPH_CLOCK = MAKE_VALUE(0x40, 6), /*!< tmr12 periph clock */ + CRM_TMR13_PERIPH_CLOCK = MAKE_VALUE(0x40, 7), /*!< tmr13 periph clock */ + CRM_TMR14_PERIPH_CLOCK = MAKE_VALUE(0x40, 8), /*!< tmr14 periph clock */ + CRM_WWDT_PERIPH_CLOCK = MAKE_VALUE(0x40, 11), /*!< wwdt periph clock */ + CRM_SPI2_PERIPH_CLOCK = MAKE_VALUE(0x40, 14), /*!< spi2 periph clock */ + CRM_SPI3_PERIPH_CLOCK = MAKE_VALUE(0x40, 15), /*!< spi3 periph clock */ + CRM_USART2_PERIPH_CLOCK = MAKE_VALUE(0x40, 17), /*!< usart2 periph clock */ + CRM_USART3_PERIPH_CLOCK = MAKE_VALUE(0x40, 18), /*!< usart3 periph clock */ + CRM_UART4_PERIPH_CLOCK = MAKE_VALUE(0x40, 19), /*!< uart4 periph clock */ + CRM_UART5_PERIPH_CLOCK = MAKE_VALUE(0x40, 20), /*!< uart5 periph clock */ + CRM_I2C1_PERIPH_CLOCK = MAKE_VALUE(0x40, 21), /*!< i2c1 periph clock */ + CRM_I2C2_PERIPH_CLOCK = MAKE_VALUE(0x40, 22), /*!< i2c2 periph clock */ + CRM_I2C3_PERIPH_CLOCK = MAKE_VALUE(0x40, 23), /*!< i2c3 periph clock */ + CRM_CAN1_PERIPH_CLOCK = MAKE_VALUE(0x40, 25), /*!< can1 periph clock */ + CRM_CAN2_PERIPH_CLOCK = MAKE_VALUE(0x40, 26), /*!< can2 periph clock */ + CRM_PWC_PERIPH_CLOCK = MAKE_VALUE(0x40, 28), /*!< pwc periph clock */ + CRM_DAC_PERIPH_CLOCK = MAKE_VALUE(0x40, 29), /*!< dac periph clock */ + CRM_UART7_PERIPH_CLOCK = MAKE_VALUE(0x40, 30), /*!< uart7 periph clock */ + CRM_UART8_PERIPH_CLOCK = MAKE_VALUE(0x40, 31), /*!< uart8 periph clock */ + /* apb2 periph */ + CRM_TMR1_PERIPH_CLOCK = MAKE_VALUE(0x44, 0), /*!< tmr1 periph clock */ + CRM_TMR8_PERIPH_CLOCK = MAKE_VALUE(0x44, 1), /*!< tmr8 periph clock */ + CRM_USART1_PERIPH_CLOCK = MAKE_VALUE(0x44, 4), /*!< usart1 periph clock */ + CRM_USART6_PERIPH_CLOCK = MAKE_VALUE(0x44, 5), /*!< usart6 periph clock */ + CRM_ADC1_PERIPH_CLOCK = MAKE_VALUE(0x44, 8), /*!< adc1 periph clock */ + CRM_ADC2_PERIPH_CLOCK = MAKE_VALUE(0x44, 9), /*!< adc2 periph clock */ + CRM_ADC3_PERIPH_CLOCK = MAKE_VALUE(0x44, 10), /*!< adc3 periph clock */ + CRM_SPI1_PERIPH_CLOCK = MAKE_VALUE(0x44, 12), /*!< spi1 periph clock */ + CRM_SPI4_PERIPH_CLOCK = MAKE_VALUE(0x44, 13), /*!< spi4 periph clock */ + CRM_SCFG_PERIPH_CLOCK = MAKE_VALUE(0x44, 14), /*!< scfg periph clock */ + CRM_TMR9_PERIPH_CLOCK = MAKE_VALUE(0x44, 16), /*!< tmr9 periph clock */ + CRM_TMR10_PERIPH_CLOCK = MAKE_VALUE(0x44, 17), /*!< tmr10 periph clock */ + CRM_TMR11_PERIPH_CLOCK = MAKE_VALUE(0x44, 18), /*!< tmr11 periph clock */ + CRM_TMR20_PERIPH_CLOCK = MAKE_VALUE(0x44, 20), /*!< tmr20 periph clock */ + CRM_ACC_PERIPH_CLOCK = MAKE_VALUE(0x44, 29) /*!< acc periph clock */ +#endif + +} crm_periph_clock_type; + +/** + * @brief crm periph reset + */ +typedef enum +{ +#if defined (AT32F435xx) + /* ahb periph1 */ + CRM_GPIOA_PERIPH_RESET = MAKE_VALUE(0x10, 0), /*!< gpioa periph reset */ + CRM_GPIOB_PERIPH_RESET = MAKE_VALUE(0x10, 1), /*!< gpiob periph reset */ + CRM_GPIOC_PERIPH_RESET = MAKE_VALUE(0x10, 2), /*!< gpioc periph reset */ + CRM_GPIOD_PERIPH_RESET = MAKE_VALUE(0x10, 3), /*!< gpiod periph reset */ + CRM_GPIOE_PERIPH_RESET = MAKE_VALUE(0x10, 4), /*!< gpioe periph reset */ + CRM_GPIOF_PERIPH_RESET = MAKE_VALUE(0x10, 5), /*!< gpiof periph reset */ + CRM_GPIOG_PERIPH_RESET = MAKE_VALUE(0x10, 6), /*!< gpiog periph reset */ + CRM_GPIOH_PERIPH_RESET = MAKE_VALUE(0x10, 7), /*!< gpioh periph reset */ + CRM_CRC_PERIPH_RESET = MAKE_VALUE(0x10, 12), /*!< crc periph reset */ + CRM_EDMA_PERIPH_RESET = MAKE_VALUE(0x10, 21), /*!< edma periph reset */ + CRM_DMA1_PERIPH_RESET = MAKE_VALUE(0x10, 22), /*!< dma1 periph reset */ + CRM_DMA2_PERIPH_RESET = MAKE_VALUE(0x10, 24), /*!< dma2 periph reset */ + CRM_OTGFS2_PERIPH_RESET = MAKE_VALUE(0x10, 29), /*!< otgfs2 periph reset */ + /* ahb periph2 */ + CRM_DVP_PERIPH_RESET = MAKE_VALUE(0x14, 0), /*!< dvp periph reset */ + CRM_OTGFS1_PERIPH_RESET = MAKE_VALUE(0x14, 7), /*!< otgfs1 periph reset */ + CRM_SDIO1_PERIPH_RESET = MAKE_VALUE(0x14, 15), /*!< sdio1 periph reset */ + /* ahb periph3 */ + CRM_XMC_PERIPH_RESET = MAKE_VALUE(0x18, 0), /*!< xmc periph reset */ + CRM_QSPI1_PERIPH_RESET = MAKE_VALUE(0x18, 1), /*!< qspi1 periph reset */ + CRM_QSPI2_PERIPH_RESET = MAKE_VALUE(0x18, 14), /*!< qspi2 periph reset */ + CRM_SDIO2_PERIPH_RESET = MAKE_VALUE(0x18, 15), /*!< sdio2 periph reset */ + /* apb1 periph */ + CRM_TMR2_PERIPH_RESET = MAKE_VALUE(0x20, 0), /*!< tmr2 periph reset */ + CRM_TMR3_PERIPH_RESET = MAKE_VALUE(0x20, 1), /*!< tmr3 periph reset */ + CRM_TMR4_PERIPH_RESET = MAKE_VALUE(0x20, 2), /*!< tmr4 periph reset */ + CRM_TMR5_PERIPH_RESET = MAKE_VALUE(0x20, 3), /*!< tmr5 periph reset */ + CRM_TMR6_PERIPH_RESET = MAKE_VALUE(0x20, 4), /*!< tmr6 periph reset */ + CRM_TMR7_PERIPH_RESET = MAKE_VALUE(0x20, 5), /*!< tmr7 periph reset */ + CRM_TMR12_PERIPH_RESET = MAKE_VALUE(0x20, 6), /*!< tmr12 periph reset */ + CRM_TMR13_PERIPH_RESET = MAKE_VALUE(0x20, 7), /*!< tmr13 periph reset */ + CRM_TMR14_PERIPH_RESET = MAKE_VALUE(0x20, 8), /*!< tmr14 periph reset */ + CRM_WWDT_PERIPH_RESET = MAKE_VALUE(0x20, 11), /*!< wwdt periph reset */ + CRM_SPI2_PERIPH_RESET = MAKE_VALUE(0x20, 14), /*!< spi2 periph reset */ + CRM_SPI3_PERIPH_RESET = MAKE_VALUE(0x20, 15), /*!< spi3 periph reset */ + CRM_USART2_PERIPH_RESET = MAKE_VALUE(0x20, 17), /*!< usart2 periph reset */ + CRM_USART3_PERIPH_RESET = MAKE_VALUE(0x20, 18), /*!< usart3 periph reset */ + CRM_UART4_PERIPH_RESET = MAKE_VALUE(0x20, 19), /*!< uart4 periph reset */ + CRM_UART5_PERIPH_RESET = MAKE_VALUE(0x20, 20), /*!< uart5 periph reset */ + CRM_I2C1_PERIPH_RESET = MAKE_VALUE(0x20, 21), /*!< i2c1 periph reset */ + CRM_I2C2_PERIPH_RESET = MAKE_VALUE(0x20, 22), /*!< i2c2 periph reset */ + CRM_I2C3_PERIPH_RESET = MAKE_VALUE(0x20, 23), /*!< i2c3 periph reset */ + CRM_CAN1_PERIPH_RESET = MAKE_VALUE(0x20, 25), /*!< can1 periph reset */ + CRM_CAN2_PERIPH_RESET = MAKE_VALUE(0x20, 26), /*!< can2 periph reset */ + CRM_PWC_PERIPH_RESET = MAKE_VALUE(0x20, 28), /*!< pwc periph reset */ + CRM_DAC_PERIPH_RESET = MAKE_VALUE(0x20, 29), /*!< dac periph reset */ + CRM_UART7_PERIPH_RESET = MAKE_VALUE(0x20, 30), /*!< uart7 periph reset */ + CRM_UART8_PERIPH_RESET = MAKE_VALUE(0x20, 31), /*!< uart8 periph reset */ + /* apb2 periph */ + CRM_TMR1_PERIPH_RESET = MAKE_VALUE(0x24, 0), /*!< tmr1 periph reset */ + CRM_TMR8_PERIPH_RESET = MAKE_VALUE(0x24, 1), /*!< tmr8 periph reset */ + CRM_USART1_PERIPH_RESET = MAKE_VALUE(0x24, 4), /*!< usart1 periph reset */ + CRM_USART6_PERIPH_RESET = MAKE_VALUE(0x24, 5), /*!< usart6 periph reset */ + CRM_ADC_PERIPH_RESET = MAKE_VALUE(0x24, 8), /*!< adc periph reset */ + CRM_SPI1_PERIPH_RESET = MAKE_VALUE(0x24, 12), /*!< spi1 periph reset */ + CRM_SPI4_PERIPH_RESET = MAKE_VALUE(0x24, 13), /*!< spi4 periph reset */ + CRM_SCFG_PERIPH_RESET = MAKE_VALUE(0x24, 14), /*!< scfg periph reset */ + CRM_TMR9_PERIPH_RESET = MAKE_VALUE(0x24, 16), /*!< tmr9 periph reset */ + CRM_TMR10_PERIPH_RESET = MAKE_VALUE(0x24, 17), /*!< tmr10 periph reset */ + CRM_TMR11_PERIPH_RESET = MAKE_VALUE(0x24, 18), /*!< tmr11 periph reset */ + CRM_TMR20_PERIPH_RESET = MAKE_VALUE(0x24, 20), /*!< tmr20 periph reset */ + CRM_ACC_PERIPH_RESET = MAKE_VALUE(0x24, 29) /*!< acc periph reset */ +#endif + +#if defined (AT32F437xx) + /* ahb periph1 */ + CRM_GPIOA_PERIPH_RESET = MAKE_VALUE(0x10, 0), /*!< gpioa periph reset */ + CRM_GPIOB_PERIPH_RESET = MAKE_VALUE(0x10, 1), /*!< gpiob periph reset */ + CRM_GPIOC_PERIPH_RESET = MAKE_VALUE(0x10, 2), /*!< gpioc periph reset */ + CRM_GPIOD_PERIPH_RESET = MAKE_VALUE(0x10, 3), /*!< gpiod periph reset */ + CRM_GPIOE_PERIPH_RESET = MAKE_VALUE(0x10, 4), /*!< gpioe periph reset */ + CRM_GPIOF_PERIPH_RESET = MAKE_VALUE(0x10, 5), /*!< gpiof periph reset */ + CRM_GPIOG_PERIPH_RESET = MAKE_VALUE(0x10, 6), /*!< gpiog periph reset */ + CRM_GPIOH_PERIPH_RESET = MAKE_VALUE(0x10, 7), /*!< gpioh periph reset */ + CRM_CRC_PERIPH_RESET = MAKE_VALUE(0x10, 12), /*!< crc periph reset */ + CRM_EDMA_PERIPH_RESET = MAKE_VALUE(0x10, 21), /*!< edma periph reset */ + CRM_DMA1_PERIPH_RESET = MAKE_VALUE(0x10, 22), /*!< dma1 periph reset */ + CRM_DMA2_PERIPH_RESET = MAKE_VALUE(0x10, 24), /*!< dma2 periph reset */ + CRM_EMAC_PERIPH_RESET = MAKE_VALUE(0x10, 25), /*!< emac periph reset */ + CRM_OTGFS2_PERIPH_RESET = MAKE_VALUE(0x10, 29), /*!< otgfs2 periph reset */ + /* ahb periph2 */ + CRM_DVP_PERIPH_RESET = MAKE_VALUE(0x14, 0), /*!< dvp periph reset */ + CRM_OTGFS1_PERIPH_RESET = MAKE_VALUE(0x14, 7), /*!< otgfs1 periph reset */ + CRM_SDIO1_PERIPH_RESET = MAKE_VALUE(0x14, 15), /*!< sdio1 periph reset */ + /* ahb periph3 */ + CRM_XMC_PERIPH_RESET = MAKE_VALUE(0x18, 0), /*!< xmc periph reset */ + CRM_QSPI1_PERIPH_RESET = MAKE_VALUE(0x18, 1), /*!< qspi1 periph reset */ + CRM_QSPI2_PERIPH_RESET = MAKE_VALUE(0x18, 14), /*!< qspi2 periph reset */ + CRM_SDIO2_PERIPH_RESET = MAKE_VALUE(0x18, 15), /*!< sdio2 periph reset */ + /* apb1 periph */ + CRM_TMR2_PERIPH_RESET = MAKE_VALUE(0x20, 0), /*!< tmr2 periph reset */ + CRM_TMR3_PERIPH_RESET = MAKE_VALUE(0x20, 1), /*!< tmr3 periph reset */ + CRM_TMR4_PERIPH_RESET = MAKE_VALUE(0x20, 2), /*!< tmr4 periph reset */ + CRM_TMR5_PERIPH_RESET = MAKE_VALUE(0x20, 3), /*!< tmr5 periph reset */ + CRM_TMR6_PERIPH_RESET = MAKE_VALUE(0x20, 4), /*!< tmr6 periph reset */ + CRM_TMR7_PERIPH_RESET = MAKE_VALUE(0x20, 5), /*!< tmr7 periph reset */ + CRM_TMR12_PERIPH_RESET = MAKE_VALUE(0x20, 6), /*!< tmr12 periph reset */ + CRM_TMR13_PERIPH_RESET = MAKE_VALUE(0x20, 7), /*!< tmr13 periph reset */ + CRM_TMR14_PERIPH_RESET = MAKE_VALUE(0x20, 8), /*!< tmr14 periph reset */ + CRM_WWDT_PERIPH_RESET = MAKE_VALUE(0x20, 11), /*!< wwdt periph reset */ + CRM_SPI2_PERIPH_RESET = MAKE_VALUE(0x20, 14), /*!< spi2 periph reset */ + CRM_SPI3_PERIPH_RESET = MAKE_VALUE(0x20, 15), /*!< spi3 periph reset */ + CRM_USART2_PERIPH_RESET = MAKE_VALUE(0x20, 17), /*!< usart2 periph reset */ + CRM_USART3_PERIPH_RESET = MAKE_VALUE(0x20, 18), /*!< usart3 periph reset */ + CRM_UART4_PERIPH_RESET = MAKE_VALUE(0x20, 19), /*!< uart4 periph reset */ + CRM_UART5_PERIPH_RESET = MAKE_VALUE(0x20, 20), /*!< uart5 periph reset */ + CRM_I2C1_PERIPH_RESET = MAKE_VALUE(0x20, 21), /*!< i2c1 periph reset */ + CRM_I2C2_PERIPH_RESET = MAKE_VALUE(0x20, 22), /*!< i2c2 periph reset */ + CRM_I2C3_PERIPH_RESET = MAKE_VALUE(0x20, 23), /*!< i2c3 periph reset */ + CRM_CAN1_PERIPH_RESET = MAKE_VALUE(0x20, 25), /*!< can1 periph reset */ + CRM_CAN2_PERIPH_RESET = MAKE_VALUE(0x20, 26), /*!< can2 periph reset */ + CRM_PWC_PERIPH_RESET = MAKE_VALUE(0x20, 28), /*!< pwc periph reset */ + CRM_DAC_PERIPH_RESET = MAKE_VALUE(0x20, 29), /*!< dac periph reset */ + CRM_UART7_PERIPH_RESET = MAKE_VALUE(0x20, 30), /*!< uart7 periph reset */ + CRM_UART8_PERIPH_RESET = MAKE_VALUE(0x20, 31), /*!< uart8 periph reset */ + /* apb2 periph */ + CRM_TMR1_PERIPH_RESET = MAKE_VALUE(0x24, 0), /*!< tmr1 periph reset */ + CRM_TMR8_PERIPH_RESET = MAKE_VALUE(0x24, 1), /*!< tmr8 periph reset */ + CRM_USART1_PERIPH_RESET = MAKE_VALUE(0x24, 4), /*!< usart1 periph reset */ + CRM_USART6_PERIPH_RESET = MAKE_VALUE(0x24, 5), /*!< usart6 periph reset */ + CRM_ADC_PERIPH_RESET = MAKE_VALUE(0x24, 8), /*!< adc periph reset */ + CRM_SPI1_PERIPH_RESET = MAKE_VALUE(0x24, 12), /*!< spi1 periph reset */ + CRM_SPI4_PERIPH_RESET = MAKE_VALUE(0x24, 13), /*!< spi4 periph reset */ + CRM_SCFG_PERIPH_RESET = MAKE_VALUE(0x24, 14), /*!< scfg periph reset */ + CRM_TMR9_PERIPH_RESET = MAKE_VALUE(0x24, 16), /*!< tmr9 periph reset */ + CRM_TMR10_PERIPH_RESET = MAKE_VALUE(0x24, 17), /*!< tmr10 periph reset */ + CRM_TMR11_PERIPH_RESET = MAKE_VALUE(0x24, 18), /*!< tmr11 periph reset */ + CRM_TMR20_PERIPH_RESET = MAKE_VALUE(0x24, 20), /*!< tmr20 periph reset */ + CRM_ACC_PERIPH_RESET = MAKE_VALUE(0x24, 29) /*!< acc periph reset */ +#endif + +} crm_periph_reset_type; + +/** + * @brief crm periph clock in low power mode + */ +typedef enum +{ +#if defined (AT32F435xx) + /* ahb periph1 */ + CRM_GPIOA_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 0), /*!< gpioa sleep mode periph clock */ + CRM_GPIOB_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 1), /*!< gpiob sleep mode periph clock */ + CRM_GPIOC_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 2), /*!< gpioc sleep mode periph clock */ + CRM_GPIOD_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 3), /*!< gpiod sleep mode periph clock */ + CRM_GPIOE_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 4), /*!< gpioe sleep mode periph clock */ + CRM_GPIOF_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 5), /*!< gpiof sleep mode periph clock */ + CRM_GPIOG_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 6), /*!< gpiog sleep mode periph clock */ + CRM_GPIOH_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 7), /*!< gpioh sleep mode periph clock */ + CRM_CRC_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 12), /*!< crc sleep mode periph clock */ + CRM_FLASH_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 15), /*!< flash sleep mode periph clock */ + CRM_SRAM1_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 16), /*!< sram1 sleep mode periph clock */ + CRM_SRAM2_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 17), /*!< sram2 sleep mode periph clock */ + CRM_EDMA_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 21), /*!< edma sleep mode periph clock */ + CRM_DMA1_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 22), /*!< dma1 sleep mode periph clock */ + CRM_DMA2_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 24), /*!< dma2 sleep mode periph clock */ + CRM_OTGFS2_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 29), /*!< otgfs2 sleep mode periph clock */ + /* ahb periph2 */ + CRM_DVP_PERIPH_LOWPOWER = MAKE_VALUE(0x54, 0), /*!< dvp sleep mode periph clock */ + CRM_OTGFS1_PERIPH_LOWPOWER = MAKE_VALUE(0x54, 7), /*!< otgfs1 sleep mode periph clock */ + CRM_SDIO1_PERIPH_LOWPOWER = MAKE_VALUE(0x54, 15), /*!< sdio1 sleep mode periph clock */ + /* ahb periph3 */ + CRM_XMC_PERIPH_LOWPOWER = MAKE_VALUE(0x58, 0), /*!< xmc sleep mode periph clock */ + CRM_QSPI1_PERIPH_LOWPOWER = MAKE_VALUE(0x58, 1), /*!< qspi1 sleep mode periph clock */ + CRM_QSPI2_PERIPH_LOWPOWER = MAKE_VALUE(0x58, 14), /*!< qspi2 sleep mode periph clock */ + CRM_SDIO2_PERIPH_LOWPOWER = MAKE_VALUE(0x58, 15), /*!< sdio2 sleep mode periph clock */ + /* apb1 periph */ + CRM_TMR2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 0), /*!< tmr2 sleep mode periph clock */ + CRM_TMR3_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 1), /*!< tmr3 sleep mode periph clock */ + CRM_TMR4_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 2), /*!< tmr4 sleep mode periph clock */ + CRM_TMR5_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 3), /*!< tmr5 sleep mode periph clock */ + CRM_TMR6_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 4), /*!< tmr6 sleep mode periph clock */ + CRM_TMR7_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 5), /*!< tmr7 sleep mode periph clock */ + CRM_TMR12_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 6), /*!< tmr12 sleep mode periph clock */ + CRM_TMR13_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 7), /*!< tmr13 sleep mode periph clock */ + CRM_TMR14_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 8), /*!< tmr14 sleep mode periph clock */ + CRM_WWDT_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 11), /*!< wwdt sleep mode periph clock */ + CRM_SPI2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 14), /*!< spi2 sleep mode periph clock */ + CRM_SPI3_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 15), /*!< spi3 sleep mode periph clock */ + CRM_USART2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 17), /*!< usart2 sleep mode periph clock */ + CRM_USART3_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 18), /*!< usart3 sleep mode periph clock */ + CRM_UART4_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 19), /*!< uart4 sleep mode periph clock */ + CRM_UART5_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 20), /*!< uart5 sleep mode periph clock */ + CRM_I2C1_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 21), /*!< i2c1 sleep mode periph clock */ + CRM_I2C2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 22), /*!< i2c2 sleep mode periph clock */ + CRM_I2C3_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 23), /*!< i2c3 sleep mode periph clock */ + CRM_CAN1_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 25), /*!< can1 sleep mode periph clock */ + CRM_CAN2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 26), /*!< can2 sleep mode periph clock */ + CRM_PWC_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 28), /*!< pwc sleep mode periph clock */ + CRM_DAC_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 29), /*!< dac sleep mode periph clock */ + CRM_UART7_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 30), /*!< uart7 sleep mode periph clock */ + CRM_UART8_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 31), /*!< uart8 sleep mode periph clock */ + /* apb2 periph */ + CRM_TMR1_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 0), /*!< tmr1 sleep mode periph clock */ + CRM_TMR8_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 1), /*!< tmr8 sleep mode periph clock */ + CRM_USART1_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 4), /*!< usart1 sleep mode periph clock */ + CRM_USART6_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 5), /*!< usart6 sleep mode periph clock */ + CRM_ADC1_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 8), /*!< adc1 sleep mode periph clock */ + CRM_ADC2_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 9), /*!< adc2 sleep mode periph clock */ + CRM_ADC3_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 10), /*!< adc3 sleep mode periph clock */ + CRM_SPI1_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 12), /*!< spi1 sleep mode periph clock */ + CRM_SPI4_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 13), /*!< spi4 sleep mode periph clock */ + CRM_SCFG_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 14), /*!< scfg sleep mode periph clock */ + CRM_TMR9_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 16), /*!< tmr9 sleep mode periph clock */ + CRM_TMR10_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 17), /*!< tmr10 sleep mode periph clock */ + CRM_TMR11_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 18), /*!< tmr11 sleep mode periph clock */ + CRM_TMR20_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 20), /*!< tmr20 sleep mode periph clock */ + CRM_ACC_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 29) /*!< acc sleep mode periph clock */ +#endif + +#if defined (AT32F437xx) + /* ahb periph1 */ + CRM_GPIOA_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 0), /*!< gpioa sleep mode periph clock */ + CRM_GPIOB_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 1), /*!< gpiob sleep mode periph clock */ + CRM_GPIOC_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 2), /*!< gpioc sleep mode periph clock */ + CRM_GPIOD_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 3), /*!< gpiod sleep mode periph clock */ + CRM_GPIOE_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 4), /*!< gpioe sleep mode periph clock */ + CRM_GPIOF_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 5), /*!< gpiof sleep mode periph clock */ + CRM_GPIOG_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 6), /*!< gpiog sleep mode periph clock */ + CRM_GPIOH_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 7), /*!< gpioh sleep mode periph clock */ + CRM_CRC_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 12), /*!< crc sleep mode periph clock */ + CRM_FLASH_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 15), /*!< flash sleep mode periph clock */ + CRM_SRAM1_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 16), /*!< sram1 sleep mode periph clock */ + CRM_SRAM2_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 17), /*!< sram2 sleep mode periph clock */ + CRM_EDMA_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 21), /*!< edma sleep mode periph clock */ + CRM_DMA1_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 22), /*!< dma1 sleep mode periph clock */ + CRM_DMA2_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 24), /*!< dma2 sleep mode periph clock */ + CRM_EMAC_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 25), /*!< emac sleep mode periph clock */ + CRM_EMACTX_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 26), /*!< emac tx sleep mode periph clock */ + CRM_EMACRX_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 27), /*!< emac rx sleep mode periph clock */ + CRM_EMACPTP_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 28), /*!< emac ptp sleep mode periph clock */ + CRM_OTGFS2_PERIPH_LOWPOWER = MAKE_VALUE(0x50, 29), /*!< otgfs2 sleep mode periph clock */ + /* ahb periph2 */ + CRM_DVP_PERIPH_LOWPOWER = MAKE_VALUE(0x54, 0), /*!< dvp sleep mode periph clock */ + CRM_OTGFS1_PERIPH_LOWPOWER = MAKE_VALUE(0x54, 7), /*!< otgfs1 sleep mode periph clock */ + CRM_SDIO1_PERIPH_LOWPOWER = MAKE_VALUE(0x54, 15), /*!< sdio1 sleep mode periph clock */ + /* ahb periph3 */ + CRM_XMC_PERIPH_LOWPOWER = MAKE_VALUE(0x58, 0), /*!< xmc sleep mode periph clock */ + CRM_QSPI1_PERIPH_LOWPOWER = MAKE_VALUE(0x58, 1), /*!< qspi1 sleep mode periph clock */ + CRM_QSPI2_PERIPH_LOWPOWER = MAKE_VALUE(0x58, 14), /*!< qspi2 sleep mode periph clock */ + CRM_SDIO2_PERIPH_LOWPOWER = MAKE_VALUE(0x58, 15), /*!< sdio2 sleep mode periph clock */ + /* apb1 periph */ + CRM_TMR2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 0), /*!< tmr2 sleep mode periph clock */ + CRM_TMR3_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 1), /*!< tmr3 sleep mode periph clock */ + CRM_TMR4_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 2), /*!< tmr4 sleep mode periph clock */ + CRM_TMR5_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 3), /*!< tmr5 sleep mode periph clock */ + CRM_TMR6_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 4), /*!< tmr6 sleep mode periph clock */ + CRM_TMR7_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 5), /*!< tmr7 sleep mode periph clock */ + CRM_TMR12_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 6), /*!< tmr12 sleep mode periph clock */ + CRM_TMR13_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 7), /*!< tmr13 sleep mode periph clock */ + CRM_TMR14_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 8), /*!< tmr14 sleep mode periph clock */ + CRM_WWDT_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 11), /*!< wwdt sleep mode periph clock */ + CRM_SPI2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 14), /*!< spi2 sleep mode periph clock */ + CRM_SPI3_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 15), /*!< spi3 sleep mode periph clock */ + CRM_USART2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 17), /*!< usart2 sleep mode periph clock */ + CRM_USART3_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 18), /*!< usart3 sleep mode periph clock */ + CRM_UART4_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 19), /*!< uart4 sleep mode periph clock */ + CRM_UART5_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 20), /*!< uart5 sleep mode periph clock */ + CRM_I2C1_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 21), /*!< i2c1 sleep mode periph clock */ + CRM_I2C2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 22), /*!< i2c2 sleep mode periph clock */ + CRM_I2C3_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 23), /*!< i2c3 sleep mode periph clock */ + CRM_CAN1_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 25), /*!< can1 sleep mode periph clock */ + CRM_CAN2_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 26), /*!< can2 sleep mode periph clock */ + CRM_PWC_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 28), /*!< pwc sleep mode periph clock */ + CRM_DAC_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 29), /*!< dac sleep mode periph clock */ + CRM_UART7_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 30), /*!< uart7 sleep mode periph clock */ + CRM_UART8_PERIPH_LOWPOWER = MAKE_VALUE(0x60, 31), /*!< uart8 sleep mode periph clock */ + /* apb2 periph */ + CRM_TMR1_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 0), /*!< tmr1 sleep mode periph clock */ + CRM_TMR8_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 1), /*!< tmr8 sleep mode periph clock */ + CRM_USART1_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 4), /*!< usart1 sleep mode periph clock */ + CRM_USART6_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 5), /*!< usart6 sleep mode periph clock */ + CRM_ADC1_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 8), /*!< adc1 sleep mode periph clock */ + CRM_ADC2_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 9), /*!< adc2 sleep mode periph clock */ + CRM_ADC3_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 10), /*!< adc3 sleep mode periph clock */ + CRM_SPI1_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 12), /*!< spi1 sleep mode periph clock */ + CRM_SPI4_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 13), /*!< spi4 sleep mode periph clock */ + CRM_SCFG_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 14), /*!< scfg sleep mode periph clock */ + CRM_TMR9_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 16), /*!< tmr9 sleep mode periph clock */ + CRM_TMR10_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 17), /*!< tmr10 sleep mode periph clock */ + CRM_TMR11_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 18), /*!< tmr11 sleep mode periph clock */ + CRM_TMR20_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 20), /*!< tmr20 sleep mode periph clock */ + CRM_ACC_PERIPH_LOWPOWER = MAKE_VALUE(0x64, 29) /*!< acc sleep mode periph clock */ +#endif + +} crm_periph_clock_lowpower_type; + +/** + * @brief crm pll clock source + */ +typedef enum +{ + CRM_PLL_SOURCE_HICK = 0x00, /*!< high speed internal clock as pll reference clock source */ + CRM_PLL_SOURCE_HEXT = 0x01 /*!< high speed external crystal as pll reference clock source */ +} crm_pll_clock_source_type; + +/** + * @brief crm pll fr + */ +typedef enum +{ + CRM_PLL_FR_1 = 0x00, /*!< pll post-division div1 */ + CRM_PLL_FR_2 = 0x01, /*!< pll post-division div2 */ + CRM_PLL_FR_4 = 0x02, /*!< pll post-division div4 */ + CRM_PLL_FR_8 = 0x03, /*!< pll post-division div8 */ + CRM_PLL_FR_16 = 0x04, /*!< pll post-division div16 */ + CRM_PLL_FR_32 = 0x05 /*!< pll post-division div32 */ +} crm_pll_fr_type; + +/** + * @brief crm clock source + */ +typedef enum +{ + CRM_CLOCK_SOURCE_HICK = 0x00, /*!< high speed internal clock */ + CRM_CLOCK_SOURCE_HEXT = 0x01, /*!< high speed external crystal */ + CRM_CLOCK_SOURCE_PLL = 0x02, /*!< phase locking loop */ + CRM_CLOCK_SOURCE_LEXT = 0x03, /*!< low speed external crystal */ + CRM_CLOCK_SOURCE_LICK = 0x04 /*!< low speed internal clock */ +} crm_clock_source_type; + +/** + * @brief crm ahb division + */ +typedef enum +{ + CRM_AHB_DIV_1 = 0x00, /*!< sclk div1 to ahbclk */ + CRM_AHB_DIV_2 = 0x08, /*!< sclk div2 to ahbclk */ + CRM_AHB_DIV_4 = 0x09, /*!< sclk div4 to ahbclk */ + CRM_AHB_DIV_8 = 0x0A, /*!< sclk div8 to ahbclk */ + CRM_AHB_DIV_16 = 0x0B, /*!< sclk div16 to ahbclk */ + CRM_AHB_DIV_64 = 0x0C, /*!< sclk div64 to ahbclk */ + CRM_AHB_DIV_128 = 0x0D, /*!< sclk div128 to ahbclk */ + CRM_AHB_DIV_256 = 0x0E, /*!< sclk div256 to ahbclk */ + CRM_AHB_DIV_512 = 0x0F /*!< sclk div512 to ahbclk */ +} crm_ahb_div_type; + +/** + * @brief crm apb1 division + */ +typedef enum +{ + CRM_APB1_DIV_1 = 0x00, /*!< ahbclk div1 to apb1clk */ + CRM_APB1_DIV_2 = 0x04, /*!< ahbclk div2 to apb1clk */ + CRM_APB1_DIV_4 = 0x05, /*!< ahbclk div4 to apb1clk */ + CRM_APB1_DIV_8 = 0x06, /*!< ahbclk div8 to apb1clk */ + CRM_APB1_DIV_16 = 0x07 /*!< ahbclk div16 to apb1clk */ +} crm_apb1_div_type; + +/** + * @brief crm apb2 division + */ +typedef enum +{ + CRM_APB2_DIV_1 = 0x00, /*!< ahbclk div1 to apb2clk */ + CRM_APB2_DIV_2 = 0x04, /*!< ahbclk div2 to apb2clk */ + CRM_APB2_DIV_4 = 0x05, /*!< ahbclk div4 to apb2clk */ + CRM_APB2_DIV_8 = 0x06, /*!< ahbclk div8 to apb2clk */ + CRM_APB2_DIV_16 = 0x07 /*!< ahbclk div16 to apb2clk */ +} crm_apb2_div_type; + +/** + * @brief crm usb division + */ +typedef enum +{ + CRM_USB_DIV_1_5 = 0x00, /*!< pllclk div1.5 to usbclk */ + CRM_USB_DIV_1 = 0x01, /*!< pllclk div1 to usbclk */ + CRM_USB_DIV_2_5 = 0x02, /*!< pllclk div2.5 to usbclk */ + CRM_USB_DIV_2 = 0x03, /*!< pllclk div2 to usbclk */ + CRM_USB_DIV_3_5 = 0x04, /*!< pllclk div3.5 to usbclk */ + CRM_USB_DIV_3 = 0x05, /*!< pllclk div3 to usbclk */ + CRM_USB_DIV_4_5 = 0x06, /*!< pllclk div4.5 to usbclk */ + CRM_USB_DIV_4 = 0x07, /*!< pllclk div4 to usbclk */ + CRM_USB_DIV_5_5 = 0x08, /*!< pllclk div5.5 to usbclk */ + CRM_USB_DIV_5 = 0x09, /*!< pllclk div5 to usbclk */ + CRM_USB_DIV_6_5 = 0x0A, /*!< pllclk div6.5 to usbclk */ + CRM_USB_DIV_6 = 0x0B, /*!< pllclk div6 to usbclk */ + CRM_USB_DIV_7 = 0x0C /*!< pllclk div7 to usbclk */ +} crm_usb_div_type; + +/** + * @brief crm ertc clock + */ +typedef enum +{ + CRM_ERTC_CLOCK_NOCLK = 0x000, /*!< no clock as ertc clock source */ + CRM_ERTC_CLOCK_LEXT = 0x001, /*!< low speed external crystal as ertc clock source */ + CRM_ERTC_CLOCK_LICK = 0x002, /*!< low speed internal clock as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_2 = 0x023, /*!< high speed external crystal div2 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_3 = 0x033, /*!< high speed external crystal div3 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_4 = 0x043, /*!< high speed external crystal div4 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_5 = 0x053, /*!< high speed external crystal div5 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_6 = 0x063, /*!< high speed external crystal div6 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_7 = 0x073, /*!< high speed external crystal div7 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_8 = 0x083, /*!< high speed external crystal div8 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_9 = 0x093, /*!< high speed external crystal div9 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_10 = 0x0A3, /*!< high speed external crystal div10 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_11 = 0x0B3, /*!< high speed external crystal div11 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_12 = 0x0C3, /*!< high speed external crystal div12 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_13 = 0x0D3, /*!< high speed external crystal div13 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_14 = 0x0E3, /*!< high speed external crystal div14 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_15 = 0x0F3, /*!< high speed external crystal div15 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_16 = 0x103, /*!< high speed external crystal div16 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_17 = 0x113, /*!< high speed external crystal div17 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_18 = 0x123, /*!< high speed external crystal div18 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_19 = 0x133, /*!< high speed external crystal div19 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_20 = 0x143, /*!< high speed external crystal div20 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_21 = 0x153, /*!< high speed external crystal div21 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_22 = 0x163, /*!< high speed external crystal div22 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_23 = 0x173, /*!< high speed external crystal div23 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_24 = 0x183, /*!< high speed external crystal div24 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_25 = 0x193, /*!< high speed external crystal div25 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_26 = 0x1A3, /*!< high speed external crystal div26 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_27 = 0x1B3, /*!< high speed external crystal div27 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_28 = 0x1C3, /*!< high speed external crystal div28 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_29 = 0x1D3, /*!< high speed external crystal div29 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_30 = 0x1E3, /*!< high speed external crystal div30 as ertc clock source */ + CRM_ERTC_CLOCK_HEXT_DIV_31 = 0x1F3 /*!< high speed external crystal div31 as ertc clock source */ +} crm_ertc_clock_type; + +/** + * @brief crm hick 48mhz division + */ +typedef enum +{ + CRM_HICK48_DIV6 = 0x00, /*!< fixed 8 mhz when hick is selected as sclk */ + CRM_HICK48_NODIV = 0x01 /*!< 8 mhz or 48 mhz depend on hickdiv when hick is selected as sclk */ +} crm_hick_div_6_type; + +/** + * @brief crm sclk select + */ +typedef enum +{ + CRM_SCLK_HICK = 0x00, /*!< select high speed internal clock as sclk */ + CRM_SCLK_HEXT = 0x01, /*!< select high speed external crystal as sclk */ + CRM_SCLK_PLL = 0x02 /*!< select phase locking loop clock as sclk */ +} crm_sclk_type; + +/** + * @brief crm clkout index + */ +typedef enum +{ + CRM_CLKOUT_INDEX_1 = 0x00, /*!< clkout1 */ + CRM_CLKOUT_INDEX_2 = 0x01 /*!< clkout2 */ +} crm_clkout_index_type; + +/** + * @brief crm clkout1 select + */ +typedef enum +{ + CRM_CLKOUT1_HICK = 0x00, /*!< output high speed internal clock to clkout1 pin */ + CRM_CLKOUT1_LEXT = 0x01, /*!< output low speed external crystal to clkout1 pin */ + CRM_CLKOUT1_HEXT = 0x02, /*!< output high speed external crystal to clkout1 pin */ + CRM_CLKOUT1_PLL = 0x03 /*!< output phase locking loop clock to clkout1 pin */ +} crm_clkout1_select_type; + +/** + * @brief crm clkout2 select + */ +typedef enum +{ + CRM_CLKOUT2_SCLK = 0x00, /*!< output system clock to clkout2 pin */ + CRM_CLKOUT2_HEXT = 0x02, /*!< output high speed external crystal to clkout2 pin */ + CRM_CLKOUT2_PLL = 0x03, /*!< output phase locking loop clock to clkout2 pin */ + CRM_CLKOUT2_USB = 0x10, /*!< output usbclk to clkout2 pin */ + CRM_CLKOUT2_ADC = 0x11, /*!< output adcclk to clkout2 pin */ + CRM_CLKOUT2_HICK = 0x12, /*!< output high speed internal clock to clkout2 pin */ + CRM_CLKOUT2_LICK = 0x13, /*!< output low speed internal clock to clkout2 pin */ + CRM_CLKOUT2_LEXT = 0x14 /*!< output low speed external crystal to clkout2 pin */ +} crm_clkout2_select_type; + +/** + * @brief crm clkout division1 + */ +typedef enum +{ + CRM_CLKOUT_DIV1_1 = 0x00, /*!< clkout division1 div1 */ + CRM_CLKOUT_DIV1_2 = 0x04, /*!< clkout division1 div2 */ + CRM_CLKOUT_DIV1_3 = 0x05, /*!< clkout division1 div3 */ + CRM_CLKOUT_DIV1_4 = 0x06, /*!< clkout division1 div4 */ + CRM_CLKOUT_DIV1_5 = 0x07 /*!< clkout division1 div5 */ +} crm_clkout_div1_type; + +/** + * @brief crm clkout division2 + */ +typedef enum +{ + CRM_CLKOUT_DIV2_1 = 0x00, /*!< clkout division2 div1 */ + CRM_CLKOUT_DIV2_2 = 0x08, /*!< clkout division2 div2 */ + CRM_CLKOUT_DIV2_4 = 0x09, /*!< clkout division2 div4 */ + CRM_CLKOUT_DIV2_8 = 0x0A, /*!< clkout division2 div8 */ + CRM_CLKOUT_DIV2_16 = 0x0B, /*!< clkout division2 div16 */ + CRM_CLKOUT_DIV2_64 = 0x0C, /*!< clkout division2 div64 */ + CRM_CLKOUT_DIV2_128 = 0x0D, /*!< clkout division2 div128 */ + CRM_CLKOUT_DIV2_256 = 0x0E, /*!< clkout division2 div256 */ + CRM_CLKOUT_DIV2_512 = 0x0F /*!< clkout division2 div512 */ +} crm_clkout_div2_type; + +/** + * @brief crm auto step mode + */ +typedef enum +{ + CRM_AUTO_STEP_MODE_DISABLE = 0x00, /*!< disable auto step mode */ + CRM_AUTO_STEP_MODE_ENABLE = 0x03 /*!< enable auto step mode */ +} crm_auto_step_mode_type; + +/** + * @brief crm usb 48 mhz clock source select + */ +typedef enum +{ + CRM_USB_CLOCK_SOURCE_PLL = 0x00, /*!< select phase locking loop clock as usb clock source */ + CRM_USB_CLOCK_SOURCE_HICK = 0x01 /*!< select high speed internal clock as usb clock source */ +} crm_usb_clock_source_type; + +/** + * @brief crm hick as system clock frequency select + */ +typedef enum +{ + CRM_HICK_SCLK_8MHZ = 0x00, /*!< fixed 8 mhz when hick is selected as sclk */ + CRM_HICK_SCLK_48MHZ = 0x01 /*!< 8 mhz or 48 mhz depend on hickdiv when hick is selected as sclk */ +} crm_hick_sclk_frequency_type; + +/** + * @brief crm emac output pulse width + */ +typedef enum +{ + CRM_EMAC_PULSE_125MS = 0x00, /*!< emac output pulse width 125ms */ + CRM_EMAC_PULSE_1SCLK = 0x01 /*!< emac output pulse width 1 system clock */ +} crm_emac_output_pulse_type; + +/** + * @brief crm clocks freqency structure + */ +typedef struct +{ + uint32_t sclk_freq; /*!< system clock frequency */ + uint32_t ahb_freq; /*!< ahb bus clock frequency */ + uint32_t apb2_freq; /*!< apb2 bus clock frequency */ + uint32_t apb1_freq; /*!< apb1 bus clock frequency */ +} crm_clocks_freq_type; + +/** + * @brief type define crm register all + */ +typedef struct +{ + /** + * @brief crm ctrl register, offset:0x00 + */ + union + { + __IO uint32_t ctrl; + struct + { + __IO uint32_t hicken : 1; /* [0] */ + __IO uint32_t hickstbl : 1; /* [1] */ + __IO uint32_t hicktrim : 6; /* [7:2] */ + __IO uint32_t hickcal : 8; /* [15:8] */ + __IO uint32_t hexten : 1; /* [16] */ + __IO uint32_t hextstbl : 1; /* [17] */ + __IO uint32_t hextbyps : 1; /* [18] */ + __IO uint32_t cfden : 1; /* [19] */ + __IO uint32_t reserved1 : 4; /* [23:20] */ + __IO uint32_t pllen : 1; /* [24] */ + __IO uint32_t pllstbl : 1; /* [25] */ + __IO uint32_t reserved2 : 6; /* [31:26] */ + } ctrl_bit; + }; + + /** + * @brief crm pllcfg register, offset:0x04 + */ + union + { + __IO uint32_t pllcfg; + struct + { + __IO uint32_t pllms : 4; /* [3:0] */ + __IO uint32_t reserved1 : 2; /* [5:4] */ + __IO uint32_t pllns : 9; /* [14:6] */ + __IO uint32_t reserved2 : 1; /* [15] */ + __IO uint32_t pllfr : 3; /* [18:16] */ + __IO uint32_t reserved3 : 3; /* [21:19] */ + __IO uint32_t pllrcs : 1; /* [22] */ + __IO uint32_t reserved4 : 9; /* [31:23] */ + } pllcfg_bit; + }; + + /** + * @brief crm cfg register, offset:0x08 + */ + union + { + __IO uint32_t cfg; + struct + { + __IO uint32_t sclksel : 2; /* [1:0] */ + __IO uint32_t sclksts : 2; /* [3:2] */ + __IO uint32_t ahbdiv : 4; /* [7:4] */ + __IO uint32_t reserved1 : 2; /* [9:8] */ + __IO uint32_t apb1div : 3; /* [12:10] */ + __IO uint32_t apb2div : 3; /* [15:13] */ + __IO uint32_t ertcdiv : 5; /* [20:16] */ + __IO uint32_t clkout1_sel : 2; /* [22:21] */ + __IO uint32_t reserved2 : 1; /* [23] */ + __IO uint32_t clkout1div1 : 3; /* [26:24] */ + __IO uint32_t clkout2div1 : 3; /* [29:27] */ + __IO uint32_t clkout2_sel1 : 2; /* [31:30] */ + } cfg_bit; + }; + + /** + * @brief crm clkint register, offset:0x0C + */ + union + { + __IO uint32_t clkint; + struct + { + __IO uint32_t lickstblf : 1; /* [0] */ + __IO uint32_t lextstblf : 1; /* [1] */ + __IO uint32_t hickstblf : 1; /* [2] */ + __IO uint32_t hextstblf : 1; /* [3] */ + __IO uint32_t pllstblf : 1; /* [4] */ + __IO uint32_t reserved1 : 2; /* [6:5] */ + __IO uint32_t cfdf : 1; /* [7] */ + __IO uint32_t lickstblien : 1; /* [8] */ + __IO uint32_t lextstblien : 1; /* [9] */ + __IO uint32_t hickstblien : 1; /* [10] */ + __IO uint32_t hextstblien : 1; /* [11] */ + __IO uint32_t pllstblien : 1; /* [12] */ + __IO uint32_t reserved2 : 3; /* [15:13] */ + __IO uint32_t lickstblfc : 1; /* [16] */ + __IO uint32_t lextstblfc : 1; /* [17] */ + __IO uint32_t hickstblfc : 1; /* [18] */ + __IO uint32_t hextstblfc : 1; /* [19] */ + __IO uint32_t pllstblfc : 1; /* [20] */ + __IO uint32_t reserved3 : 2; /* [22:21] */ + __IO uint32_t cfdfc : 1; /* [23] */ + __IO uint32_t reserved4 : 8; /* [31:24] */ + } clkint_bit; + }; + + /** + * @brief crm ahbrst1 register, offset:0x10 + */ + union + { + __IO uint32_t ahbrst1; +#if defined (AT32F435xx) + struct + { + __IO uint32_t gpioarst : 1; /* [0] */ + __IO uint32_t gpiobrst : 1; /* [1] */ + __IO uint32_t gpiocrst : 1; /* [2] */ + __IO uint32_t gpiodrst : 1; /* [3] */ + __IO uint32_t gpioerst : 1; /* [4] */ + __IO uint32_t gpiofrst : 1; /* [5] */ + __IO uint32_t gpiogrst : 1; /* [6] */ + __IO uint32_t gpiohrst : 1; /* [7] */ + __IO uint32_t reserved1 : 4; /* [11:8] */ + __IO uint32_t crcrst : 1; /* [12] */ + __IO uint32_t reserved2 : 8; /* [20:13] */ + __IO uint32_t edmarst : 1; /* [21] */ + __IO uint32_t dma1rst : 1; /* [22] */ + __IO uint32_t reserved3 : 1; /* [23] */ + __IO uint32_t dma2rst : 1; /* [24] */ + __IO uint32_t reserved4 : 4; /* [28:25] */ + __IO uint32_t otgfs2rst : 1; /* [29] */ + __IO uint32_t reserved5 : 2; /* [31:30] */ + } ahbrst1_bit; +#endif + +#if defined (AT32F437xx) + struct + { + __IO uint32_t gpioarst : 1; /* [0] */ + __IO uint32_t gpiobrst : 1; /* [1] */ + __IO uint32_t gpiocrst : 1; /* [2] */ + __IO uint32_t gpiodrst : 1; /* [3] */ + __IO uint32_t gpioerst : 1; /* [4] */ + __IO uint32_t gpiofrst : 1; /* [5] */ + __IO uint32_t gpiogrst : 1; /* [6] */ + __IO uint32_t gpiohrst : 1; /* [7] */ + __IO uint32_t reserved1 : 4; /* [11:8] */ + __IO uint32_t crcrst : 1; /* [12] */ + __IO uint32_t reserved2 : 8; /* [20:13] */ + __IO uint32_t edmarst : 1; /* [21] */ + __IO uint32_t dma1rst : 1; /* [22] */ + __IO uint32_t reserved3 : 1; /* [23] */ + __IO uint32_t dma2rst : 1; /* [24] */ + __IO uint32_t emacrst : 1; /* [25] */ + __IO uint32_t reserved4 : 3; /* [28:26] */ + __IO uint32_t otgfs2rst : 1; /* [29] */ + __IO uint32_t reserved5 : 2; /* [31:30] */ + } ahbrst1_bit; +#endif + }; + + /** + * @brief crm ahbrst2 register, offset:0x14 + */ + union + { + __IO uint32_t ahbrst2; + struct + { + __IO uint32_t dvprst : 1; /* [0] */ + __IO uint32_t reserved1 : 6; /* [6:1] */ + __IO uint32_t otgfs1rst : 1; /* [7] */ + __IO uint32_t reserved2 : 7; /* [14:8] */ + __IO uint32_t sdio1rst : 1; /* [15] */ + __IO uint32_t reserved3 : 16;/* [31:16] */ + } ahbrst2_bit; + }; + + /** + * @brief crm ahbrst3 register, offset:0x18 + */ + union + { + __IO uint32_t ahbrst3; + struct + { + __IO uint32_t xmcrst : 1; /* [0] */ + __IO uint32_t qspi1rst : 1; /* [1] */ + __IO uint32_t reserved1 : 12;/* [13:2] */ + __IO uint32_t qspi2rst : 1; /* [14] */ + __IO uint32_t sdio2rst : 1; /* [15] */ + __IO uint32_t reserved3 : 16;/* [31:16] */ + } ahbrst3_bit; + }; + + /** + * @brief crm reserved1 register, offset:0x1C + */ + __IO uint32_t reserved1; + + /** + * @brief crm apb1rst register, offset:0x20 + */ + union + { + __IO uint32_t apb1rst; + struct + { + __IO uint32_t tmr2rst : 1; /* [0] */ + __IO uint32_t tmr3rst : 1; /* [1] */ + __IO uint32_t tmr4rst : 1; /* [2] */ + __IO uint32_t tmr5rst : 1; /* [3] */ + __IO uint32_t tmr6rst : 1; /* [4] */ + __IO uint32_t tmr7rst : 1; /* [5] */ + __IO uint32_t tmr12rst : 1; /* [6] */ + __IO uint32_t tmr13rst : 1; /* [7] */ + __IO uint32_t adc14rst : 1; /* [8] */ + __IO uint32_t reserved1 : 2; /* [10:9] */ + __IO uint32_t wwdtrst : 1; /* [11] */ + __IO uint32_t reserved2 : 2; /* [13:12] */ + __IO uint32_t spi2rst : 1; /* [14] */ + __IO uint32_t spi3rst : 1; /* [15] */ + __IO uint32_t reserved3 : 1; /* [16] */ + __IO uint32_t usart2rst : 1; /* [17] */ + __IO uint32_t usart3rst : 1; /* [18] */ + __IO uint32_t uart4rst : 1; /* [19] */ + __IO uint32_t uart5rst : 1; /* [20] */ + __IO uint32_t i2c1rst : 1; /* [21] */ + __IO uint32_t i2c2rst : 1; /* [22] */ + __IO uint32_t i2c3rst : 1; /* [23] */ + __IO uint32_t reserved4 : 1; /* [24] */ + __IO uint32_t can1rst : 1; /* [25] */ + __IO uint32_t can2rst : 1; /* [26] */ + __IO uint32_t reserved5 : 1; /* [27] */ + __IO uint32_t pwcrst : 1; /* [28] */ + __IO uint32_t dacrst : 1; /* [29] */ + __IO uint32_t uart7rst : 1; /* [30] */ + __IO uint32_t uart8rst : 1; /* [31] */ + } apb1rst_bit; + }; + + /** + * @brief crm apb2rst register, offset:0x24 + */ + union + { + __IO uint32_t apb2rst; + struct + { + __IO uint32_t tmr1rst : 1; /* [0] */ + __IO uint32_t tmr8rst : 1; /* [1] */ + __IO uint32_t reserved1 : 2; /* [3:2] */ + __IO uint32_t usart1rst : 1; /* [4] */ + __IO uint32_t usart6rst : 1; /* [5] */ + __IO uint32_t reserved2 : 2; /* [7:6] */ + __IO uint32_t adcrst : 1; /* [8] */ + __IO uint32_t reserved3 : 3; /* [11:9] */ + __IO uint32_t spi1rst : 1; /* [12] */ + __IO uint32_t spi4rst : 1; /* [13] */ + __IO uint32_t scfgrst : 1; /* [14] */ + __IO uint32_t reserved4 : 1; /* [15] */ + __IO uint32_t tmr9rst : 1; /* [16] */ + __IO uint32_t tmr10rst : 1; /* [17] */ + __IO uint32_t tmr11rst : 1; /* [18] */ + __IO uint32_t reserved5 : 1; /* [19] */ + __IO uint32_t tmr20rst : 1; /* [20] */ + __IO uint32_t reserved6 : 8; /* [28:21] */ + __IO uint32_t accrst : 1; /* [29] */ + __IO uint32_t reserved7 : 2; /* [31:30] */ + } apb2rst_bit; + }; + + /** + * @brief crm reserved2 register, offset:0x28~0x2C + */ + __IO uint32_t reserved2[2]; + + /** + * @brief crm ahben1 register, offset:0x30 + */ + union + { + __IO uint32_t ahben1; +#if defined (AT32F435xx) + struct + { + __IO uint32_t gpioaen : 1; /* [0] */ + __IO uint32_t gpioben : 1; /* [1] */ + __IO uint32_t gpiocen : 1; /* [2] */ + __IO uint32_t gpioden : 1; /* [3] */ + __IO uint32_t gpioeen : 1; /* [4] */ + __IO uint32_t gpiofen : 1; /* [5] */ + __IO uint32_t gpiogen : 1; /* [6] */ + __IO uint32_t gpiohen : 1; /* [7] */ + __IO uint32_t reserved1 : 4; /* [11:8] */ + __IO uint32_t crcen : 1; /* [12] */ + __IO uint32_t reserved2 : 8; /* [20:13] */ + __IO uint32_t edmaen : 1; /* [21] */ + __IO uint32_t dma1en : 1; /* [22] */ + __IO uint32_t reserved3 : 1; /* [23] */ + __IO uint32_t dma2en : 1; /* [24] */ + __IO uint32_t reserved4 : 4; /* [28:25] */ + __IO uint32_t otgfs2en : 1; /* [29] */ + __IO uint32_t reserved5 : 2; /* [31:30] */ + } ahben1_bit; +#endif + +#if defined (AT32F437xx) + struct + { + __IO uint32_t gpioaen : 1; /* [0] */ + __IO uint32_t gpioben : 1; /* [1] */ + __IO uint32_t gpiocen : 1; /* [2] */ + __IO uint32_t gpioden : 1; /* [3] */ + __IO uint32_t gpioeen : 1; /* [4] */ + __IO uint32_t gpiofen : 1; /* [5] */ + __IO uint32_t gpiogen : 1; /* [6] */ + __IO uint32_t gpiohen : 1; /* [7] */ + __IO uint32_t reserved1 : 4; /* [11:8] */ + __IO uint32_t crcen : 1; /* [12] */ + __IO uint32_t reserved2 : 8; /* [20:13] */ + __IO uint32_t edmaen : 1; /* [21] */ + __IO uint32_t dma1en : 1; /* [22] */ + __IO uint32_t reserved3 : 1; /* [23] */ + __IO uint32_t dma2en : 1; /* [24] */ + __IO uint32_t emacen : 1; /* [25] */ + __IO uint32_t emactxen : 1; /* [26] */ + __IO uint32_t emacrxen : 1; /* [27] */ + __IO uint32_t emacptpen : 1; /* [28] */ + __IO uint32_t otgfs2en : 1; /* [29] */ + __IO uint32_t reserved4 : 2; /* [31:30] */ + } ahben1_bit; +#endif + }; + + /** + * @brief crm ahben2 register, offset:0x34 + */ + union + { + __IO uint32_t ahben2; + struct + { + __IO uint32_t dvpen : 1; /* [0] */ + __IO uint32_t reserved1 : 6; /* [6:1] */ + __IO uint32_t otgfs1en : 1; /* [7] */ + __IO uint32_t reserved2 : 7; /* [14:8] */ + __IO uint32_t sdio1en : 1; /* [15] */ + __IO uint32_t reserved3 : 16;/* [31:16] */ + } ahben2_bit; + }; + + /** + * @brief crm ahben3 register, offset:0x38 + */ + union + { + __IO uint32_t ahben3; + struct + { + __IO uint32_t xmcen : 1; /* [0] */ + __IO uint32_t qspi1en : 1; /* [1] */ + __IO uint32_t reserved1 : 12;/* [13:2] */ + __IO uint32_t qspi2en : 1; /* [14] */ + __IO uint32_t sdio2en : 1; /* [15] */ + __IO uint32_t reserved3 : 16;/* [31:16] */ + } ahben3_bit; + }; + + /** + * @brief crm reserved3 register, offset:0x3C + */ + __IO uint32_t reserved3; + + /** + * @brief crm apb1en register, offset:0x40 + */ + union + { + __IO uint32_t apb1en; + struct + { + __IO uint32_t tmr2en : 1; /* [0] */ + __IO uint32_t tmr3en : 1; /* [1] */ + __IO uint32_t tmr4en : 1; /* [2] */ + __IO uint32_t tmr5en : 1; /* [3] */ + __IO uint32_t tmr6en : 1; /* [4] */ + __IO uint32_t tmr7en : 1; /* [5] */ + __IO uint32_t tmr12en : 1; /* [6] */ + __IO uint32_t tmr13en : 1; /* [7] */ + __IO uint32_t adc14en : 1; /* [8] */ + __IO uint32_t reserved1 : 2; /* [10:9] */ + __IO uint32_t wwdten : 1; /* [11] */ + __IO uint32_t reserved2 : 2; /* [13:12] */ + __IO uint32_t spi2en : 1; /* [14] */ + __IO uint32_t spi3en : 1; /* [15] */ + __IO uint32_t reserved3 : 1; /* [16] */ + __IO uint32_t usart2en : 1; /* [17] */ + __IO uint32_t usart3en : 1; /* [18] */ + __IO uint32_t uart4en : 1; /* [19] */ + __IO uint32_t uart5en : 1; /* [20] */ + __IO uint32_t i2c1en : 1; /* [21] */ + __IO uint32_t i2c2en : 1; /* [22] */ + __IO uint32_t i2c3en : 1; /* [23] */ + __IO uint32_t reserved4 : 1; /* [24] */ + __IO uint32_t can1en : 1; /* [25] */ + __IO uint32_t can2en : 1; /* [26] */ + __IO uint32_t reserved5 : 1; /* [27] */ + __IO uint32_t pwcen : 1; /* [28] */ + __IO uint32_t dacen : 1; /* [29] */ + __IO uint32_t uart7en : 1; /* [30] */ + __IO uint32_t uart8en : 1; /* [31] */ + } apb1en_bit; + }; + + /** + * @brief crm apb2en register, offset:0x44 + */ + union + { + __IO uint32_t apb2en; + struct + { + __IO uint32_t tmr1en : 1; /* [0] */ + __IO uint32_t tmr8en : 1; /* [1] */ + __IO uint32_t reserved1 : 2; /* [3:2] */ + __IO uint32_t usart1en : 1; /* [4] */ + __IO uint32_t usart6en : 1; /* [5] */ + __IO uint32_t reserved2 : 2; /* [7:6] */ + __IO uint32_t adcen : 1; /* [8] */ + __IO uint32_t reserved3 : 3; /* [11:9] */ + __IO uint32_t spi1en : 1; /* [12] */ + __IO uint32_t spi4en : 1; /* [13] */ + __IO uint32_t scfgen : 1; /* [14] */ + __IO uint32_t reserved4 : 1; /* [15] */ + __IO uint32_t tmr9en : 1; /* [16] */ + __IO uint32_t tmr10en : 1; /* [17] */ + __IO uint32_t tmr11en : 1; /* [18] */ + __IO uint32_t reserved5 : 1; /* [19] */ + __IO uint32_t tmr20en : 1; /* [20] */ + __IO uint32_t reserved6 : 8; /* [28:21] */ + __IO uint32_t accen : 1; /* [29] */ + __IO uint32_t reserved7 : 2; /* [31:30] */ + } apb2en_bit; + }; + + /** + * @brief crm reserved4 register, offset:0x48~0x4C + */ + __IO uint32_t reserved4[2]; + + /** + * @brief crm ahblpen1 register, offset:0x50 + */ + union + { + __IO uint32_t ahblpen1; +#if defined (AT32F435xx) + struct + { + __IO uint32_t gpioalpen : 1; /* [0] */ + __IO uint32_t gpioblpen : 1; /* [1] */ + __IO uint32_t gpioclpen : 1; /* [2] */ + __IO uint32_t gpiodlpen : 1; /* [3] */ + __IO uint32_t gpioelpen : 1; /* [4] */ + __IO uint32_t gpioflpen : 1; /* [5] */ + __IO uint32_t gpioglpen : 1; /* [6] */ + __IO uint32_t gpiohlpen : 1; /* [7] */ + __IO uint32_t reserved1 : 4; /* [11:8] */ + __IO uint32_t crclpen : 1; /* [12] */ + __IO uint32_t reserved2 : 8; /* [20:13] */ + __IO uint32_t edmalpen : 1; /* [21] */ + __IO uint32_t dma1lpen : 1; /* [22] */ + __IO uint32_t reserved3 : 1; /* [23] */ + __IO uint32_t dma2lpen : 1; /* [24] */ + __IO uint32_t reserved4 : 4; /* [28:25] */ + __IO uint32_t otgfs2lpen : 1; /* [29] */ + __IO uint32_t reserved5 : 2; /* [31:30] */ + } ahblpen1_bit; +#endif + +#if defined (AT32F437xx) + struct + { + __IO uint32_t gpioalpen : 1; /* [0] */ + __IO uint32_t gpioblpen : 1; /* [1] */ + __IO uint32_t gpioclpen : 1; /* [2] */ + __IO uint32_t gpiodlpen : 1; /* [3] */ + __IO uint32_t gpioelpen : 1; /* [4] */ + __IO uint32_t gpioflpen : 1; /* [5] */ + __IO uint32_t gpioglpen : 1; /* [6] */ + __IO uint32_t gpiohlpen : 1; /* [7] */ + __IO uint32_t reserved1 : 4; /* [11:8] */ + __IO uint32_t crclpen : 1; /* [12] */ + __IO uint32_t reserved2 : 8; /* [20:13] */ + __IO uint32_t edmalpen : 1; /* [21] */ + __IO uint32_t dma1lpen : 1; /* [22] */ + __IO uint32_t reserved3 : 1; /* [23] */ + __IO uint32_t dma2lpen : 1; /* [24] */ + __IO uint32_t emaclpen : 1; /* [25] */ + __IO uint32_t emactxlpen : 1; /* [26] */ + __IO uint32_t emacrxlpen : 1; /* [27] */ + __IO uint32_t emacptplpen : 1; /* [28] */ + __IO uint32_t otgfs2lpen : 1; /* [29] */ + __IO uint32_t reserved4 : 2; /* [31:30] */ + } ahblpen1_bit; +#endif + }; + + /** + * @brief crm ahblpen2 register, offset:0x54 + */ + union + { + __IO uint32_t ahblpen2; + struct + { + __IO uint32_t dvplpen : 1; /* [0] */ + __IO uint32_t reserved1 : 6; /* [6:1] */ + __IO uint32_t otgfs1lpen : 1; /* [7] */ + __IO uint32_t reserved2 : 7; /* [14:8] */ + __IO uint32_t sdio1lpen : 1; /* [15] */ + __IO uint32_t reserved3 : 16;/* [31:16] */ + } ahblpen2_bit; + }; + + /** + * @brief crm ahblpen3 register, offset:0x58 + */ + union + { + __IO uint32_t ahblpen3; + struct + { + __IO uint32_t xmclpen : 1; /* [0] */ + __IO uint32_t qspi1lpen : 1; /* [1] */ + __IO uint32_t reserved1 : 12;/* [13:2] */ + __IO uint32_t qspi2lpen : 1; /* [14] */ + __IO uint32_t sdio2lpen : 1; /* [15] */ + __IO uint32_t reserved3 : 16;/* [31:16] */ + } ahblpen3_bit; + }; + + /** + * @brief crm reserved5 register, offset:0x5C + */ + __IO uint32_t reserved5; + + /** + * @brief crm apb1lpen register, offset:0x60 + */ + union + { + __IO uint32_t apb1lpen; + struct + { + __IO uint32_t tmr2lpen : 1; /* [0] */ + __IO uint32_t tmr3lpen : 1; /* [1] */ + __IO uint32_t tmr4lpen : 1; /* [2] */ + __IO uint32_t tmr5lpen : 1; /* [3] */ + __IO uint32_t tmr6lpen : 1; /* [4] */ + __IO uint32_t tmr7lpen : 1; /* [5] */ + __IO uint32_t tmr12lpen : 1; /* [6] */ + __IO uint32_t tmr13lpen : 1; /* [7] */ + __IO uint32_t adc14lpen : 1; /* [8] */ + __IO uint32_t reserved1 : 2; /* [10:9] */ + __IO uint32_t wwdtlpen : 1; /* [11] */ + __IO uint32_t reserved2 : 2; /* [13:12] */ + __IO uint32_t spi2lpen : 1; /* [14] */ + __IO uint32_t spi3lpen : 1; /* [15] */ + __IO uint32_t reserved3 : 1; /* [16] */ + __IO uint32_t usart2lpen : 1; /* [17] */ + __IO uint32_t usart3lpen : 1; /* [18] */ + __IO uint32_t uart4lpen : 1; /* [19] */ + __IO uint32_t uart5lpen : 1; /* [20] */ + __IO uint32_t i2c1lpen : 1; /* [21] */ + __IO uint32_t i2c2lpen : 1; /* [22] */ + __IO uint32_t i2c3lpen : 1; /* [23] */ + __IO uint32_t reserved4 : 1; /* [24] */ + __IO uint32_t can1lpen : 1; /* [25] */ + __IO uint32_t can2lpen : 1; /* [26] */ + __IO uint32_t reserved5 : 1; /* [27] */ + __IO uint32_t pwclpen : 1; /* [28] */ + __IO uint32_t daclpen : 1; /* [29] */ + __IO uint32_t uart7lpen : 1; /* [30] */ + __IO uint32_t uart8lpen : 1; /* [31] */ + } apb1lpen_bit; + }; + + /** + * @brief crm apb2lpen register, offset:0x64 + */ + union + { + __IO uint32_t apb2lpen; + struct + { + __IO uint32_t tmr1lpen : 1; /* [0] */ + __IO uint32_t tmr8lpen : 1; /* [1] */ + __IO uint32_t reserved1 : 2; /* [3:2] */ + __IO uint32_t usart1lpen : 1; /* [4] */ + __IO uint32_t usart6lpen : 1; /* [5] */ + __IO uint32_t reserved2 : 2; /* [7:6] */ + __IO uint32_t adclpen : 1; /* [8] */ + __IO uint32_t reserved3 : 3; /* [11:9] */ + __IO uint32_t spi1lpen : 1; /* [12] */ + __IO uint32_t spi4lpen : 1; /* [13] */ + __IO uint32_t scfglpen : 1; /* [14] */ + __IO uint32_t reserved4 : 1; /* [15] */ + __IO uint32_t tmr9lpen : 1; /* [16] */ + __IO uint32_t tmr10lpen : 1; /* [17] */ + __IO uint32_t tmr11lpen : 1; /* [18] */ + __IO uint32_t reserved5 : 1; /* [19] */ + __IO uint32_t tmr20lpen : 1; /* [20] */ + __IO uint32_t reserved6 : 8; /* [28:21] */ + __IO uint32_t acclpen : 1; /* [29] */ + __IO uint32_t reserved7 : 2; /* [31:30] */ + } apb2lpen_bit; + }; + + /** + * @brief crm reserved6 register, offset:0x68~0x6C + */ + __IO uint32_t reserved6[2]; + + /** + * @brief crm bpdc register, offset:0x70 + */ + union + { + __IO uint32_t bpdc; + struct + { + __IO uint32_t lexten : 1; /* [0] */ + __IO uint32_t lextstbl : 1; /* [1] */ + __IO uint32_t lextbyps : 1; /* [2] */ + __IO uint32_t reserved1 : 5; /* [7:3] */ + __IO uint32_t ertcsel : 2; /* [9:8] */ + __IO uint32_t reserved2 : 5; /* [14:10] */ + __IO uint32_t ertcen : 1; /* [15] */ + __IO uint32_t bpdrst : 1; /* [16] */ + __IO uint32_t reserved3 : 15;/* [31:17] */ + } bpdc_bit; + }; + + /** + * @brief crm ctrlsts register, offset:0x74 + */ + union + { + __IO uint32_t ctrlsts; + struct + { + __IO uint32_t licken : 1; /* [0] */ + __IO uint32_t lickstbl : 1; /* [1] */ + __IO uint32_t reserved1 : 22;/* [23:2] */ + __IO uint32_t rstfc : 1; /* [24] */ + __IO uint32_t reserved2 : 1; /* [25] */ + __IO uint32_t nrstf : 1; /* [26] */ + __IO uint32_t porrstf : 1; /* [27] */ + __IO uint32_t swrstf : 1; /* [28] */ + __IO uint32_t wdtrstf : 1; /* [29] */ + __IO uint32_t wwdtrstf : 1; /* [30] */ + __IO uint32_t lprstf : 1; /* [31] */ + } ctrlsts_bit; + }; + + /** + * @brief crm reserved7 register, offset:0x78~0x9C + */ + __IO uint32_t reserved7[10]; + + /** + * @brief crm misc1 register, offset:0xA0 + */ + union + { + __IO uint32_t misc1; + struct + { + __IO uint32_t hickcal_key : 8; /* [7:0] */ + __IO uint32_t reserved1 : 4; /* [11:8] */ + __IO uint32_t hickdiv : 1; /* [12] */ + __IO uint32_t hick_to_usb : 1; /* [13] */ + __IO uint32_t hick_to_sclk : 1; /* [14] */ + __IO uint32_t reserved2 : 1; /* [15] */ + __IO uint32_t clkout2_sel2 : 4; /* [19:16] */ + __IO uint32_t reserved3 : 4; /* [23:20] */ + __IO uint32_t clkout1div2 : 4; /* [27:24] */ + __IO uint32_t clkout2div2 : 4; /* [31:28] */ + } misc1_bit; + }; + + /** + * @brief crm misc2 register, offset:0xA4 + */ + union + { + __IO uint32_t misc2; + struct + { + __IO uint32_t reserved1 : 4; /* [3:0] */ + __IO uint32_t auto_step_en : 2; /* [5:4] */ + __IO uint32_t reserved2 : 2; /* [7:6] */ + __IO uint32_t clk_to_tmr : 1; /* [8] */ + __IO uint32_t emac_pps_sel : 1; /* [9] */ + __IO uint32_t reserved3 : 2; /* [11:10] */ + __IO uint32_t usbdiv : 4; /* [15:12] */ + __IO uint32_t reserved4 : 16;/* [31:16] */ + } misc2_bit; + }; + +} crm_type; + +/** + * @} + */ + +#define CRM ((crm_type *) CRM_BASE) + +/** @defgroup CRM_exported_functions + * @{ + */ + +void crm_reset(void); +void crm_lext_bypass(confirm_state new_state); +void crm_hext_bypass(confirm_state new_state); +flag_status crm_flag_get(uint32_t flag); +flag_status crm_interrupt_flag_get(uint32_t flag); +error_status crm_hext_stable_wait(void); +void crm_hick_clock_trimming_set(uint8_t trim_value); +void crm_hick_clock_calibration_set(uint8_t cali_value); +void crm_periph_clock_enable(crm_periph_clock_type value, confirm_state new_state); +void crm_periph_reset(crm_periph_reset_type value, confirm_state new_state); +void crm_periph_lowpower_mode_enable(crm_periph_clock_lowpower_type value, confirm_state new_state); +void crm_clock_source_enable(crm_clock_source_type source, confirm_state new_state); +void crm_flag_clear(uint32_t flag); +void crm_ertc_clock_select(crm_ertc_clock_type value); +void crm_ertc_clock_enable(confirm_state new_state); +void crm_ahb_div_set(crm_ahb_div_type value); +void crm_apb1_div_set(crm_apb1_div_type value); +void crm_apb2_div_set(crm_apb2_div_type value); +void crm_usb_clock_div_set(crm_usb_div_type value); +void crm_clock_failure_detection_enable(confirm_state new_state); +void crm_battery_powered_domain_reset(confirm_state new_state); +void crm_auto_step_mode_enable(confirm_state new_state); +void crm_hick_divider_select(crm_hick_div_6_type value); +void crm_hick_sclk_frequency_select(crm_hick_sclk_frequency_type value); +void crm_usb_clock_source_select(crm_usb_clock_source_type value); +void crm_clkout_to_tmr10_enable(confirm_state new_state); +void crm_pll_config(crm_pll_clock_source_type clock_source, uint16_t pll_ns, \ + uint16_t pll_ms, crm_pll_fr_type pll_fr); +void crm_sysclk_switch(crm_sclk_type value); +crm_sclk_type crm_sysclk_switch_status_get(void); +void crm_clocks_freq_get(crm_clocks_freq_type *clocks_struct); +void crm_clock_out1_set(crm_clkout1_select_type clkout); +void crm_clock_out2_set(crm_clkout2_select_type clkout); +void crm_clkout_div_set(crm_clkout_index_type index, crm_clkout_div1_type div1, crm_clkout_div2_type div2); +void crm_emac_output_pulse_set(crm_emac_output_pulse_type width); +void crm_interrupt_enable(uint32_t crm_int, confirm_state new_state); +error_status crm_pll_parameter_calculate(crm_pll_clock_source_type pll_rcs, uint32_t target_sclk_freq, \ + uint16_t *ret_ms, uint16_t *ret_ns, uint16_t *ret_fr); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_dac.h b/armlib/at32_sys/drivers/inc/at32f435_437_dac.h new file mode 100644 index 000000000..a09aac851 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_dac.h @@ -0,0 +1,393 @@ +/** + ************************************************************************** + * @file at32f435_437_dac.h + * @brief at32f435_437 dac header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_DAC_H +#define __AT32F435_437_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup DAC + * @{ + */ + +#define DAC1_D1DMAUDRF ((uint32_t)(0x00002000)) +#define DAC2_D2DMAUDRF ((uint32_t)(0x20000000)) + +/** @defgroup DAC_exported_types + * @{ + */ + +/** + * @brief dac select type + */ +typedef enum +{ + DAC1_SELECT = 0x01, /*!< dac1 select */ + DAC2_SELECT = 0x02 /*!< dac2 select */ +} dac_select_type; + +/** + * @brief dac trigger type + */ +typedef enum +{ + DAC_TMR6_TRGOUT_EVENT = 0x00, /*!< dac trigger selection:timer6 trgout event */ + DAC_TMR8_TRGOUT_EVENT = 0x01, /*!< dac trigger selection:timer8 trgout event */ + DAC_TMR7_TRGOUT_EVENT = 0x02, /*!< dac trigger selection:timer7 trgout event */ + DAC_TMR5_TRGOUT_EVENT = 0x03, /*!< dac trigger selection:timer5 trgout event */ + DAC_TMR2_TRGOUT_EVENT = 0x04, /*!< dac trigger selection:timer2 trgout event */ + DAC_TMR4_TRGOUT_EVENT = 0x05, /*!< dac trigger selection:timer4 trgout event */ + DAC_EXTERNAL_INTERRUPT_LINE_9 = 0x06, /*!< dac trigger selection:external line9 */ + DAC_SOFTWARE_TRIGGER = 0x07 /*!< dac trigger selection:software trigger */ +} dac_trigger_type; + +/** + * @brief dac wave type + */ +typedef enum +{ + DAC_WAVE_GENERATE_NONE = 0x00, /*!< dac wave generation disabled */ + DAC_WAVE_GENERATE_NOISE = 0x01, /*!< dac noise wave generation enabled */ + DAC_WAVE_GENERATE_TRIANGLE = 0x02 /*!< dac triangle wave generation enabled */ +} dac_wave_type; + +/** + * @brief dac mask amplitude type + */ +typedef enum +{ + DAC_LSFR_BIT0_AMPLITUDE_1 = 0x00, /*!< unmask bit0/ triangle amplitude equal to 1 */ + DAC_LSFR_BIT10_AMPLITUDE_3 = 0x01, /*!< unmask bit[1:0]/ triangle amplitude equal to 3 */ + DAC_LSFR_BIT20_AMPLITUDE_7 = 0x02, /*!< unmask bit[2:0]/ triangle amplitude equal to 7 */ + DAC_LSFR_BIT30_AMPLITUDE_15 = 0x03, /*!< unmask bit[3:0]/ triangle amplitude equal to 15 */ + DAC_LSFR_BIT40_AMPLITUDE_31 = 0x04, /*!< unmask bit[4:0]/ triangle amplitude equal to 31 */ + DAC_LSFR_BIT50_AMPLITUDE_63 = 0x05, /*!< unmask bit[5:0]/ triangle amplitude equal to 63 */ + DAC_LSFR_BIT60_AMPLITUDE_127 = 0x06, /*!< unmask bit[6:0]/ triangle amplitude equal to 127 */ + DAC_LSFR_BIT70_AMPLITUDE_255 = 0x07, /*!< unmask bit[7:0]/ triangle amplitude equal to 255 */ + DAC_LSFR_BIT80_AMPLITUDE_511 = 0x08, /*!< unmask bit[8:0]/ triangle amplitude equal to 511 */ + DAC_LSFR_BIT90_AMPLITUDE_1023 = 0x09, /*!< unmask bit[9:0]/ triangle amplitude equal to 1023 */ + DAC_LSFR_BITA0_AMPLITUDE_2047 = 0x0A, /*!< unmask bit[10:0]/ triangle amplitude equal to 2047 */ + DAC_LSFR_BITB0_AMPLITUDE_4095 = 0x0B /*!< unmask bit[11:0]/ triangle amplitude equal to 4095 */ +} dac_mask_amplitude_type; + +/** + * @brief dac1 aligned data type + */ +typedef enum +{ + DAC1_12BIT_RIGHT = 0x40007408, /*!< dac1 12-bit data right-aligned */ + DAC1_12BIT_LEFT = 0x4000740C, /*!< dac1 12-bit data left-aligned */ + DAC1_8BIT_RIGHT = 0x40007410 /*!< dac1 8-bit data right-aligned */ +} dac1_aligned_data_type; + +/** + * @brief dac2 aligned data type + */ +typedef enum +{ + DAC2_12BIT_RIGHT = 0x40007414, /*!< dac2 12-bit data right-aligned */ + DAC2_12BIT_LEFT = 0x40007418, /*!< dac2 12-bit data left-aligned */ + DAC2_8BIT_RIGHT = 0x4000741C /*!< dac2 8-bit data right-aligned */ +} dac2_aligned_data_type; + +/** + * @brief dac dual data type + */ +typedef enum +{ + DAC_DUAL_12BIT_RIGHT = 0x40007420, /*!divr_bit.fdiv = div) + +/** + * @} + */ + +/** @defgroup FLASH_exported_types + * @{ + */ + +/** + * @brief flash usd eopb0 type + */ +typedef enum +{ + FLASH_EOPB0_SRAM_512K = 0x00, /*!< sram 512k, flash zw area 128k */ + FLASH_EOPB0_SRAM_448K = 0x01, /*!< sram 448k, flash zw area 192k */ + FLASH_EOPB0_SRAM_384K = 0x02, /*!< sram 384k, flash zw area 256k */ + FLASH_EOPB0_SRAM_320K = 0x03, /*!< sram 320k, flash zw area 320k */ + FLASH_EOPB0_SRAM_256K = 0x04, /*!< sram 256k, flash zw area 384k */ + FLASH_EOPB0_SRAM_192K = 0x05, /*!< sram 192k, flash zw area 448k */ + FLASH_EOPB0_SRAM_128K = 0x06 /*!< sram 128k, flash zw area 512k */ +} flash_usd_eopb0_type; + +/** + * @brief flash clock divider type + */ +typedef enum +{ + FLASH_CLOCK_DIV_2 = 0x00, /*!< flash clock divide by 2 */ + FLASH_CLOCK_DIV_3 = 0x01, /*!< flash clock divide by 3 */ + FLASH_CLOCK_DIV_4 = 0x02 /*!< flash clock divide by 4 */ +} flash_clock_divider_type; + +/** + * @brief flash status type + */ +typedef enum +{ + FLASH_OPERATE_BUSY = 0x00, /*!< flash status is operate busy */ + FLASH_PROGRAM_ERROR = 0x01, /*!< flash status is program error */ + FLASH_EPP_ERROR = 0x02, /*!< flash status is epp error */ + FLASH_OPERATE_DONE = 0x03, /*!< flash status is operate done */ + FLASH_OPERATE_TIMEOUT = 0x04 /*!< flash status is operate timeout */ +} flash_status_type; + +/** + * @brief type define flash register all + */ +typedef struct +{ + /** + * @brief flash psr register, offset:0x00 + */ + union + { + __IO uint32_t psr; + struct + { + __IO uint32_t reserved1 : 12;/* [11:0] */ + __IO uint32_t nzw_bst : 1; /* [12] */ + __IO uint32_t nzw_bst_sts : 1; /* [13] */ + __IO uint32_t reserved2 : 18;/* [31:14] */ + } psr_bit; + }; + + /** + * @brief flash unlock register, offset:0x04 + */ + union + { + __IO uint32_t unlock; + struct + { + __IO uint32_t ukval : 32;/* [31:0] */ + } unlock_bit; + }; + + /** + * @brief flash usd unlock register, offset:0x08 + */ + union + { + __IO uint32_t usd_unlock; + struct + { + __IO uint32_t usd_ukval : 32;/* [31:0] */ + } usd_unlock_bit; + }; + + /** + * @brief flash sts register, offset:0x0C + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t obf : 1; /* [0] */ + __IO uint32_t reserved1 : 1; /* [1] */ + __IO uint32_t prgmerr : 1; /* [2] */ + __IO uint32_t reserved2 : 1; /* [3] */ + __IO uint32_t epperr : 1; /* [4] */ + __IO uint32_t odf : 1; /* [5] */ + __IO uint32_t reserved3 : 26;/* [31:6] */ + } sts_bit; + }; + + /** + * @brief flash ctrl register, offset:0x10 + */ + union + { + __IO uint32_t ctrl; + struct + { + __IO uint32_t fprgm : 1; /* [0] */ + __IO uint32_t secers : 1; /* [1] */ + __IO uint32_t bankers : 1; /* [2] */ + __IO uint32_t blkers : 1; /* [3] */ + __IO uint32_t usdprgm : 1; /* [4] */ + __IO uint32_t usders : 1; /* [5] */ + __IO uint32_t erstr : 1; /* [6] */ + __IO uint32_t oplk : 1; /* [7] */ + __IO uint32_t reserved1 : 1; /* [8] */ + __IO uint32_t usdulks : 1; /* [9] */ + __IO uint32_t errie : 1; /* [10] */ + __IO uint32_t reserved2 : 1; /* [11] */ + __IO uint32_t odfie : 1; /* [12] */ + __IO uint32_t reserved3 : 19;/* [31:13] */ + } ctrl_bit; + }; + + /** + * @brief flash addr register, offset:0x14 + */ + union + { + __IO uint32_t addr; + struct + { + __IO uint32_t fa : 32;/* [31:0] */ + } addr_bit; + }; + + /** + * @brief flash reserved1 register, offset:0x18 + */ + __IO uint32_t reserved1; + + /** + * @brief flash usd register, offset:0x1C + */ + union + { + __IO uint32_t usd; + struct + { + __IO uint32_t usderr : 1; /* [0] */ + __IO uint32_t fap : 1; /* [1] */ + __IO uint32_t wdt_ato_en : 1; /* [2] */ + __IO uint32_t depslp_rst : 1; /* [3] */ + __IO uint32_t stdby_rst : 1; /* [4] */ + __IO uint32_t btopt : 1; /* [5] */ + __IO uint32_t reserved1 : 1; /* [6] */ + __IO uint32_t wdt_depslp : 1; /* [7] */ + __IO uint32_t wdt_stdby : 1; /* [8] */ + __IO uint32_t reserved2 : 1; /* [9] */ + __IO uint32_t user_d0 : 8; /* [17:10] */ + __IO uint32_t user_d1 : 8; /* [25:18] */ + __IO uint32_t reserved3 : 6; /* [31:26] */ + } usd_bit; + }; + + /** + * @brief flash epps0 register, offset:0x20 + */ + union + { + __IO uint32_t epps0; + struct + { + __IO uint32_t epps : 32;/* [31:0] */ + } epps0_bit; + }; + + /** + * @brief flash reserved2 register, offset:0x28~0x24 + */ + __IO uint32_t reserved2[2]; + + /** + * @brief flash epps1 register, offset:0x2C + */ + union + { + __IO uint32_t epps1; + struct + { + __IO uint32_t epps : 32;/* [31:0] */ + } epps1_bit; + }; + + /** + * @brief flash reserved3 register, offset:0x40~0x30 + */ + __IO uint32_t reserved3[5]; + + /** + * @brief flash unlock2 register, offset:0x44 + */ + union + { + __IO uint32_t unlock2; + struct + { + __IO uint32_t ukval : 32;/* [31:0] */ + } unlock2_bit; + }; + + /** + * @brief flash reserved4 register, offset:0x48 + */ + __IO uint32_t reserved4; + + /** + * @brief flash sts2 register, offset:0x4C + */ + union + { + __IO uint32_t sts2; + struct + { + __IO uint32_t obf : 1; /* [0] */ + __IO uint32_t reserved1 : 1; /* [1] */ + __IO uint32_t prgmerr : 1; /* [2] */ + __IO uint32_t reserved2 : 1; /* [3] */ + __IO uint32_t epperr : 1; /* [4] */ + __IO uint32_t odf : 1; /* [5] */ + __IO uint32_t reserved3 : 26;/* [31:6] */ + } sts2_bit; + }; + + /** + * @brief flash ctrl2 register, offset:0x50 + */ + union + { + __IO uint32_t ctrl2; + struct + { + __IO uint32_t fprgm : 1; /* [0] */ + __IO uint32_t secers : 1; /* [1] */ + __IO uint32_t bankers : 1; /* [2] */ + __IO uint32_t blkers : 1; /* [3] */ + __IO uint32_t reserved1 : 2; /* [5:4] */ + __IO uint32_t erstr : 1; /* [6] */ + __IO uint32_t oplk : 1; /* [7] */ + __IO uint32_t reserved2 : 2; /* [9:8] */ + __IO uint32_t errie : 1; /* [10] */ + __IO uint32_t reserved3 : 1; /* [11] */ + __IO uint32_t odfie : 1; /* [12] */ + __IO uint32_t reserved4 : 19;/* [31:13] */ + } ctrl2_bit; + }; + + /** + * @brief flash addr2 register, offset:0x54 + */ + union + { + __IO uint32_t addr2; + struct + { + __IO uint32_t fa : 32;/* [31:0] */ + } addr2_bit; + }; + + /** + * @brief flash contr register, offset:0x58 + */ + union + { + __IO uint32_t contr; + struct + { + __IO uint32_t reserved1 : 31;/* [30:0] */ + __IO uint32_t fcontr_en : 1; /* [31] */ + } contr_bit; + }; + + /** + * @brief flash reserved5 register, offset:0x5C + */ + __IO uint32_t reserved5; + + /** + * @brief flash divr register, offset:0x60 + */ + union + { + __IO uint32_t divr; + struct + { + __IO uint32_t fdiv : 2; /* [1:0] */ + __IO uint32_t reserved1 : 2; /* [3:2] */ + __IO uint32_t fdiv_sts : 2; /* [5:4] */ + __IO uint32_t reserved2 : 26;/* [31:6] */ + } divr_bit; + }; + + /** + * @brief flash reserved6 register, offset:0xC4~0x64 + */ + __IO uint32_t reserved6[25]; + + /** + * @brief flash slib_sts2 register, offset:0xC8 + */ + union + { + __IO uint32_t slib_sts2; + struct + { + __IO uint32_t slib_inst_ss : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } slib_sts2_bit; + }; + + /** + * @brief flash slib_sts0 register, offset:0xCC + */ + union + { + __IO uint32_t slib_sts0; + struct + { + __IO uint32_t reserved1 : 3; /* [2:0] */ + __IO uint32_t slib_enf : 1; /* [3] */ + __IO uint32_t reserved2 : 28;/* [31:4] */ + } slib_sts0_bit; + }; + + /** + * @brief flash slib_sts1 register, offset:0xD0 + */ + union + { + __IO uint32_t slib_sts1; + struct + { + __IO uint32_t slib_ss : 16;/* [15:0] */ + __IO uint32_t slib_es : 16;/* [31:16] */ + } slib_sts1_bit; + }; + + /** + * @brief flash slib_pwd_clr register, offset:0xD4 + */ + union + { + __IO uint32_t slib_pwd_clr; + struct + { + __IO uint32_t slib_pclr_val : 32;/* [31:0] */ + } slib_pwd_clr_bit; + }; + + /** + * @brief flash slib_misc_sts register, offset:0xD8 + */ + union + { + __IO uint32_t slib_misc_sts; + struct + { + __IO uint32_t slib_pwd_err : 1; /* [0] */ + __IO uint32_t slib_pwd_ok : 1; /* [1] */ + __IO uint32_t slib_ulkf : 1; /* [2] */ + __IO uint32_t reserved1 : 13;/* [15:3] */ + __IO uint32_t slib_rcnt : 9; /* [24:16] */ + __IO uint32_t reserved2 : 7; /* [31:25] */ + } slib_misc_sts_bit; + }; + + /** + * @brief flash slib_set_pwd register, offset:0xDC + */ + union + { + __IO uint32_t slib_set_pwd; + struct + { + __IO uint32_t slib_pset_val : 32;/* [31:0] */ + } slib_set_pwd_bit; + }; + + /** + * @brief flash slib_set_range0 register, offset:0xE0 + */ + union + { + __IO uint32_t slib_set_range0; + struct + { + __IO uint32_t slib_ss_set : 16;/* [15:0] */ + __IO uint32_t slib_es_set : 16;/* [31:16] */ + } slib_set_range0_bit; + }; + + /** + * @brief flash slib_set_range1 register, offset:0xE4 + */ + union + { + __IO uint32_t slib_set_range1; + struct + { + __IO uint32_t slib_iss_set : 16;/* [15:0] */ + __IO uint32_t reserved1 : 15;/* [30:16] */ + __IO uint32_t set_slib_strt : 1; /* [31] */ + } slib_set_range1_bit; + }; + + /** + * @brief flash reserved7 register, offset:0xEC~0xE8 + */ + __IO uint32_t reserved7[2]; + + /** + * @brief flash slib_unlock register, offset:0xF0 + */ + union + { + __IO uint32_t slib_unlock; + struct + { + __IO uint32_t slib_ukval : 32;/* [31:0] */ + } slib_unlock_bit; + }; + + /** + * @brief flash crc_ctrl register, offset:0xF4 + */ + union + { + __IO uint32_t crc_ctrl; + struct + { + __IO uint32_t crc_ss : 12;/* [11:0] */ + __IO uint32_t crc_sn : 12;/* [23:12] */ + __IO uint32_t reserved1 : 7; /* [30:24] */ + __IO uint32_t crc_strt : 1; /* [31] */ + } crc_ctrl_bit; + }; + + /** + * @brief flash crc_chkr register, offset:0xF8 + */ + union + { + __IO uint32_t crc_chkr; + struct + { + __IO uint32_t crc_chkr : 32;/* [31:0] */ + } crc_chkr_bit; + }; + +} flash_type; + +/** + * @brief user system data + */ +typedef struct +{ + __IO uint16_t fap; + __IO uint16_t ssb; + __IO uint16_t data0; + __IO uint16_t data1; + __IO uint16_t epp0; + __IO uint16_t epp1; + __IO uint16_t epp2; + __IO uint16_t epp3; + __IO uint16_t eopb0; + __IO uint16_t reserved1; + __IO uint16_t epp4; + __IO uint16_t epp5; + __IO uint16_t epp6; + __IO uint16_t epp7; + __IO uint16_t reserved2[12]; + __IO uint16_t qspikey[8]; +} usd_type; + +/** + * @} + */ + +#define FLASH ((flash_type *) FLASH_REG_BASE) +#define USD ((usd_type *) USD_BASE) + +/** @defgroup FLASH_exported_functions + * @{ + */ + +flag_status flash_flag_get(uint32_t flash_flag); +void flash_flag_clear(uint32_t flash_flag); +flash_status_type flash_operation_status_get(void); +flash_status_type flash_bank1_operation_status_get(void); +flash_status_type flash_bank2_operation_status_get(void); +flash_status_type flash_operation_wait_for(uint32_t time_out); +flash_status_type flash_bank1_operation_wait_for(uint32_t time_out); +flash_status_type flash_bank2_operation_wait_for(uint32_t time_out); +void flash_unlock(void); +void flash_bank1_unlock(void); +void flash_bank2_unlock(void); +void flash_lock(void); +void flash_bank1_lock(void); +void flash_bank2_lock(void); +flash_status_type flash_sector_erase(uint32_t sector_address); +flash_status_type flash_block_erase(uint32_t block_address); +flash_status_type flash_internal_all_erase(void); +flash_status_type flash_bank1_erase(void); +flash_status_type flash_bank2_erase(void); +flash_status_type flash_user_system_data_erase(void); +flash_status_type flash_eopb0_config(flash_usd_eopb0_type data); +flash_status_type flash_word_program(uint32_t address, uint32_t data); +flash_status_type flash_halfword_program(uint32_t address, uint16_t data); +flash_status_type flash_byte_program(uint32_t address, uint8_t data); +flash_status_type flash_user_system_data_program(uint32_t address, uint8_t data); +flash_status_type flash_epp_set(uint32_t *sector_bits); +void flash_epp_status_get(uint32_t *sector_bits); +flash_status_type flash_fap_enable(confirm_state new_state); +flag_status flash_fap_status_get(void); +flash_status_type flash_ssb_set(uint8_t usd_ssb); +uint8_t flash_ssb_status_get(void); +void flash_interrupt_enable(uint32_t flash_int, confirm_state new_state); +flash_status_type flash_slib_enable(uint32_t pwd, uint16_t start_sector, uint16_t inst_start_sector, uint16_t end_sector); +error_status flash_slib_disable(uint32_t pwd); +uint32_t flash_slib_remaining_count_get(void); +flag_status flash_slib_state_get(void); +uint16_t flash_slib_start_sector_get(void); +uint16_t flash_slib_inststart_sector_get(void); +uint16_t flash_slib_end_sector_get(void); +uint32_t flash_crc_calibrate(uint32_t start_sector, uint32_t sector_cnt); +void flash_nzw_boost_enable(confirm_state new_state); +void flash_continue_read_enable(confirm_state new_state); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_gpio.h b/armlib/at32_sys/drivers/inc/at32f435_437_gpio.h new file mode 100644 index 000000000..0e8d91a70 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_gpio.h @@ -0,0 +1,563 @@ +/** + ************************************************************************** + * @file at32f435_437_gpio.h + * @brief at32f435_437 gpio header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_GPIO_H +#define __AT32F435_437_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/** @defgroup GPIO_pins_number_definition + * @{ + */ + +#define GPIO_PINS_0 0x0001 /*!< gpio pins number 0 */ +#define GPIO_PINS_1 0x0002 /*!< gpio pins number 1 */ +#define GPIO_PINS_2 0x0004 /*!< gpio pins number 2 */ +#define GPIO_PINS_3 0x0008 /*!< gpio pins number 3 */ +#define GPIO_PINS_4 0x0010 /*!< gpio pins number 4 */ +#define GPIO_PINS_5 0x0020 /*!< gpio pins number 5 */ +#define GPIO_PINS_6 0x0040 /*!< gpio pins number 6 */ +#define GPIO_PINS_7 0x0080 /*!< gpio pins number 7 */ +#define GPIO_PINS_8 0x0100 /*!< gpio pins number 8 */ +#define GPIO_PINS_9 0x0200 /*!< gpio pins number 9 */ +#define GPIO_PINS_10 0x0400 /*!< gpio pins number 10 */ +#define GPIO_PINS_11 0x0800 /*!< gpio pins number 11 */ +#define GPIO_PINS_12 0x1000 /*!< gpio pins number 12 */ +#define GPIO_PINS_13 0x2000 /*!< gpio pins number 13 */ +#define GPIO_PINS_14 0x4000 /*!< gpio pins number 14 */ +#define GPIO_PINS_15 0x8000 /*!< gpio pins number 15 */ +#define GPIO_PINS_ALL 0xFFFF /*!< gpio all pins */ + +/** + * @} + */ + +/** @defgroup GPIO_exported_types + * @{ + */ + +/** + * @brief gpio mode select + */ +typedef enum +{ + GPIO_MODE_INPUT = 0x00, /*!< gpio input mode */ + GPIO_MODE_OUTPUT = 0x01, /*!< gpio output mode */ + GPIO_MODE_MUX = 0x02, /*!< gpio mux function mode */ + GPIO_MODE_ANALOG = 0x03 /*!< gpio analog in/out mode */ +} gpio_mode_type; + +/** + * @brief gpio output drive strength select + */ +typedef enum +{ + GPIO_DRIVE_STRENGTH_STRONGER = 0x01, /*!< stronger sourcing/sinking strength */ + GPIO_DRIVE_STRENGTH_MODERATE = 0x02 /*!< moderate sourcing/sinking strength */ +} gpio_drive_type; + +/** + * @brief gpio output type + */ +typedef enum +{ + GPIO_OUTPUT_PUSH_PULL = 0x00, /*!< output push-pull */ + GPIO_OUTPUT_OPEN_DRAIN = 0x01 /*!< output open-drain */ +} gpio_output_type; + +/** + * @brief gpio pull type + */ +typedef enum +{ + GPIO_PULL_NONE = 0x00, /*!< floating for input, no pull for output */ + GPIO_PULL_UP = 0x01, /*!< pull-up */ + GPIO_PULL_DOWN = 0x02 /*!< pull-down */ +} gpio_pull_type; + +/** + * @brief gpio init type + */ +typedef struct +{ + uint32_t gpio_pins; /*!< pins number selection */ + gpio_output_type gpio_out_type; /*!< output type selection */ + gpio_pull_type gpio_pull; /*!< pull type selection */ + gpio_mode_type gpio_mode; /*!< mode selection */ + gpio_drive_type gpio_drive_strength; /*!< drive strength selection */ +} gpio_init_type; + +/** + * @brief gpio pins source type + */ +typedef enum +{ + GPIO_PINS_SOURCE0 = 0x00, /*!< gpio pins source number 0 */ + GPIO_PINS_SOURCE1 = 0x01, /*!< gpio pins source number 1 */ + GPIO_PINS_SOURCE2 = 0x02, /*!< gpio pins source number 2 */ + GPIO_PINS_SOURCE3 = 0x03, /*!< gpio pins source number 3 */ + GPIO_PINS_SOURCE4 = 0x04, /*!< gpio pins source number 4 */ + GPIO_PINS_SOURCE5 = 0x05, /*!< gpio pins source number 5 */ + GPIO_PINS_SOURCE6 = 0x06, /*!< gpio pins source number 6 */ + GPIO_PINS_SOURCE7 = 0x07, /*!< gpio pins source number 7 */ + GPIO_PINS_SOURCE8 = 0x08, /*!< gpio pins source number 8 */ + GPIO_PINS_SOURCE9 = 0x09, /*!< gpio pins source number 9 */ + GPIO_PINS_SOURCE10 = 0x0A, /*!< gpio pins source number 10 */ + GPIO_PINS_SOURCE11 = 0x0B, /*!< gpio pins source number 11 */ + GPIO_PINS_SOURCE12 = 0x0C, /*!< gpio pins source number 12 */ + GPIO_PINS_SOURCE13 = 0x0D, /*!< gpio pins source number 13 */ + GPIO_PINS_SOURCE14 = 0x0E, /*!< gpio pins source number 14 */ + GPIO_PINS_SOURCE15 = 0x0F /*!< gpio pins source number 15 */ +} gpio_pins_source_type; + +/** + * @brief gpio muxing function selection type + */ +typedef enum +{ + GPIO_MUX_0 = 0x00, /*!< gpio muxing function selection 0 */ + GPIO_MUX_1 = 0x01, /*!< gpio muxing function selection 1 */ + GPIO_MUX_2 = 0x02, /*!< gpio muxing function selection 2 */ + GPIO_MUX_3 = 0x03, /*!< gpio muxing function selection 3 */ + GPIO_MUX_4 = 0x04, /*!< gpio muxing function selection 4 */ + GPIO_MUX_5 = 0x05, /*!< gpio muxing function selection 5 */ + GPIO_MUX_6 = 0x06, /*!< gpio muxing function selection 6 */ + GPIO_MUX_7 = 0x07, /*!< gpio muxing function selection 7 */ + GPIO_MUX_8 = 0x08, /*!< gpio muxing function selection 8 */ + GPIO_MUX_9 = 0x09, /*!< gpio muxing function selection 9 */ + GPIO_MUX_10 = 0x0A, /*!< gpio muxing function selection 10 */ + GPIO_MUX_11 = 0x0B, /*!< gpio muxing function selection 11 */ + GPIO_MUX_12 = 0x0C, /*!< gpio muxing function selection 12 */ + GPIO_MUX_13 = 0x0D, /*!< gpio muxing function selection 13 */ + GPIO_MUX_14 = 0x0E, /*!< gpio muxing function selection 14 */ + GPIO_MUX_15 = 0x0F /*!< gpio muxing function selection 15 */ +} gpio_mux_sel_type; + +/** + * @brief type define gpio register all + */ +typedef struct +{ + /** + * @brief gpio mode register, offset:0x00 + */ + union + { + __IO uint32_t cfgr; + struct + { + __IO uint32_t iomc0 : 2; /* [1:0] */ + __IO uint32_t iomc1 : 2; /* [3:2] */ + __IO uint32_t iomc2 : 2; /* [5:4] */ + __IO uint32_t iomc3 : 2; /* [7:6] */ + __IO uint32_t iomc4 : 2; /* [9:8] */ + __IO uint32_t iomc5 : 2; /* [11:10] */ + __IO uint32_t iomc6 : 2; /* [13:12] */ + __IO uint32_t iomc7 : 2; /* [15:14] */ + __IO uint32_t iomc8 : 2; /* [17:16] */ + __IO uint32_t iomc9 : 2; /* [19:18] */ + __IO uint32_t iomc10 : 2; /* [21:20] */ + __IO uint32_t iomc11 : 2; /* [23:22] */ + __IO uint32_t iomc12 : 2; /* [25:24] */ + __IO uint32_t iomc13 : 2; /* [27:26] */ + __IO uint32_t iomc14 : 2; /* [29:28] */ + __IO uint32_t iomc15 : 2; /* [31:30] */ + } cfgr_bit; + }; + + /** + * @brief gpio output type register, offset:0x04 + */ + union + { + __IO uint32_t omode; + struct + { + __IO uint32_t om0 : 1; /* [0] */ + __IO uint32_t om1 : 1; /* [1] */ + __IO uint32_t om2 : 1; /* [2] */ + __IO uint32_t om3 : 1; /* [3] */ + __IO uint32_t om4 : 1; /* [4] */ + __IO uint32_t om5 : 1; /* [5] */ + __IO uint32_t om6 : 1; /* [6] */ + __IO uint32_t om7 : 1; /* [7] */ + __IO uint32_t om8 : 1; /* [8] */ + __IO uint32_t om9 : 1; /* [9] */ + __IO uint32_t om10 : 1; /* [10] */ + __IO uint32_t om11 : 1; /* [11] */ + __IO uint32_t om12 : 1; /* [12] */ + __IO uint32_t om13 : 1; /* [13] */ + __IO uint32_t om14 : 1; /* [14] */ + __IO uint32_t om15 : 1; /* [15] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } omode_bit; + }; + + /** + * @brief gpio output driver register, offset:0x08 + */ + union + { + __IO uint32_t odrvr; + struct + { + __IO uint32_t odrv0 : 2; /* [1:0] */ + __IO uint32_t odrv1 : 2; /* [3:2] */ + __IO uint32_t odrv2 : 2; /* [5:4] */ + __IO uint32_t odrv3 : 2; /* [7:6] */ + __IO uint32_t odrv4 : 2; /* [9:8] */ + __IO uint32_t odrv5 : 2; /* [11:10] */ + __IO uint32_t odrv6 : 2; /* [13:12] */ + __IO uint32_t odrv7 : 2; /* [15:14] */ + __IO uint32_t odrv8 : 2; /* [17:16] */ + __IO uint32_t odrv9 : 2; /* [19:18] */ + __IO uint32_t odrv10 : 2; /* [21:20] */ + __IO uint32_t odrv11 : 2; /* [23:22] */ + __IO uint32_t odrv12 : 2; /* [25:24] */ + __IO uint32_t odrv13 : 2; /* [27:26] */ + __IO uint32_t odrv14 : 2; /* [29:28] */ + __IO uint32_t odrv15 : 2; /* [31:30] */ + } odrvr_bit; + }; + + /** + * @brief gpio pull up/down register, offset:0x0C + */ + union + { + __IO uint32_t pull; + struct + { + __IO uint32_t pull0 : 2; /* [1:0] */ + __IO uint32_t pull1 : 2; /* [3:2] */ + __IO uint32_t pull2 : 2; /* [5:4] */ + __IO uint32_t pull3 : 2; /* [7:6] */ + __IO uint32_t pull4 : 2; /* [9:8] */ + __IO uint32_t pull5 : 2; /* [11:10] */ + __IO uint32_t pull6 : 2; /* [13:12] */ + __IO uint32_t pull7 : 2; /* [15:14] */ + __IO uint32_t pull8 : 2; /* [17:16] */ + __IO uint32_t pull9 : 2; /* [19:18] */ + __IO uint32_t pull10 : 2; /* [21:20] */ + __IO uint32_t pull11 : 2; /* [23:22] */ + __IO uint32_t pull12 : 2; /* [25:24] */ + __IO uint32_t pull13 : 2; /* [27:26] */ + __IO uint32_t pull14 : 2; /* [29:28] */ + __IO uint32_t pull15 : 2; /* [31:30] */ + } pull_bit; + }; + + /** + * @brief gpio input data register, offset:0x10 + */ + union + { + __IO uint32_t idt; + struct + { + __IO uint32_t idt0 : 1; /* [0] */ + __IO uint32_t idt1 : 1; /* [1] */ + __IO uint32_t idt2 : 1; /* [2] */ + __IO uint32_t idt3 : 1; /* [3] */ + __IO uint32_t idt4 : 1; /* [4] */ + __IO uint32_t idt5 : 1; /* [5] */ + __IO uint32_t idt6 : 1; /* [6] */ + __IO uint32_t idt7 : 1; /* [7] */ + __IO uint32_t idt8 : 1; /* [8] */ + __IO uint32_t idt9 : 1; /* [9] */ + __IO uint32_t idt10 : 1; /* [10] */ + __IO uint32_t idt11 : 1; /* [11] */ + __IO uint32_t idt12 : 1; /* [12] */ + __IO uint32_t idt13 : 1; /* [13] */ + __IO uint32_t idt14 : 1; /* [14] */ + __IO uint32_t idt15 : 1; /* [15] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } idt_bit; + }; + + /** + * @brief gpio output data register, offset:0x14 + */ + union + { + __IO uint32_t odt; + struct + { + __IO uint32_t odt0 : 1; /* [0] */ + __IO uint32_t odt1 : 1; /* [1] */ + __IO uint32_t odt2 : 1; /* [2] */ + __IO uint32_t odt3 : 1; /* [3] */ + __IO uint32_t odt4 : 1; /* [4] */ + __IO uint32_t odt5 : 1; /* [5] */ + __IO uint32_t odt6 : 1; /* [6] */ + __IO uint32_t odt7 : 1; /* [7] */ + __IO uint32_t odt8 : 1; /* [8] */ + __IO uint32_t odt9 : 1; /* [9] */ + __IO uint32_t odt10 : 1; /* [10] */ + __IO uint32_t odt11 : 1; /* [11] */ + __IO uint32_t odt12 : 1; /* [12] */ + __IO uint32_t odt13 : 1; /* [13] */ + __IO uint32_t odt14 : 1; /* [14] */ + __IO uint32_t odt15 : 1; /* [15] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } odt_bit; + }; + + /** + * @brief gpio scr register, offset:0x18 + */ + union + { + __IO uint32_t scr; + struct + { + __IO uint32_t iosb0 : 1; /* [0] */ + __IO uint32_t iosb1 : 1; /* [1] */ + __IO uint32_t iosb2 : 1; /* [2] */ + __IO uint32_t iosb3 : 1; /* [3] */ + __IO uint32_t iosb4 : 1; /* [4] */ + __IO uint32_t iosb5 : 1; /* [5] */ + __IO uint32_t iosb6 : 1; /* [6] */ + __IO uint32_t iosb7 : 1; /* [7] */ + __IO uint32_t iosb8 : 1; /* [8] */ + __IO uint32_t iosb9 : 1; /* [9] */ + __IO uint32_t iosb10 : 1; /* [10] */ + __IO uint32_t iosb11 : 1; /* [11] */ + __IO uint32_t iosb12 : 1; /* [12] */ + __IO uint32_t iosb13 : 1; /* [13] */ + __IO uint32_t iosb14 : 1; /* [14] */ + __IO uint32_t iosb15 : 1; /* [15] */ + __IO uint32_t iocb0 : 1; /* [16] */ + __IO uint32_t iocb1 : 1; /* [17] */ + __IO uint32_t iocb2 : 1; /* [18] */ + __IO uint32_t iocb3 : 1; /* [19] */ + __IO uint32_t iocb4 : 1; /* [20] */ + __IO uint32_t iocb5 : 1; /* [21] */ + __IO uint32_t iocb6 : 1; /* [22] */ + __IO uint32_t iocb7 : 1; /* [23] */ + __IO uint32_t iocb8 : 1; /* [24] */ + __IO uint32_t iocb9 : 1; /* [25] */ + __IO uint32_t iocb10 : 1; /* [26] */ + __IO uint32_t iocb11 : 1; /* [27] */ + __IO uint32_t iocb12 : 1; /* [28] */ + __IO uint32_t iocb13 : 1; /* [29] */ + __IO uint32_t iocb14 : 1; /* [30] */ + __IO uint32_t iocb15 : 1; /* [31] */ + } scr_bit; + }; + + /** + * @brief gpio wpen register, offset:0x1C + */ + union + { + __IO uint32_t wpr; + struct + { + __IO uint32_t wpen0 : 1; /* [0] */ + __IO uint32_t wpen1 : 1; /* [1] */ + __IO uint32_t wpen2 : 1; /* [2] */ + __IO uint32_t wpen3 : 1; /* [3] */ + __IO uint32_t wpen4 : 1; /* [4] */ + __IO uint32_t wpen5 : 1; /* [5] */ + __IO uint32_t wpen6 : 1; /* [6] */ + __IO uint32_t wpen7 : 1; /* [7] */ + __IO uint32_t wpen8 : 1; /* [8] */ + __IO uint32_t wpen9 : 1; /* [9] */ + __IO uint32_t wpen10 : 1; /* [10] */ + __IO uint32_t wpen11 : 1; /* [11] */ + __IO uint32_t wpen12 : 1; /* [12] */ + __IO uint32_t wpen13 : 1; /* [13] */ + __IO uint32_t wpen14 : 1; /* [14] */ + __IO uint32_t wpen15 : 1; /* [15] */ + __IO uint32_t wpseq : 1; /* [16] */ + __IO uint32_t reserved1 : 15;/* [31:17] */ + } wpr_bit; + }; + + /** + * @brief gpio muxl register, offset:0x20 + */ + union + { + __IO uint32_t muxl; + struct + { + __IO uint32_t muxl0 : 4; /* [3:0] */ + __IO uint32_t muxl1 : 4; /* [7:4] */ + __IO uint32_t muxl2 : 4; /* [11:8] */ + __IO uint32_t muxl3 : 4; /* [15:12] */ + __IO uint32_t muxl4 : 4; /* [19:16] */ + __IO uint32_t muxl5 : 4; /* [23:20] */ + __IO uint32_t muxl6 : 4; /* [27:24] */ + __IO uint32_t muxl7 : 4; /* [31:28] */ + } muxl_bit; + }; + + /** + * @brief gpio muxh register, offset:0x24 + */ + union + { + __IO uint32_t muxh; + struct + { + __IO uint32_t muxh8 : 4; /* [3:0] */ + __IO uint32_t muxh9 : 4; /* [7:4] */ + __IO uint32_t muxh10 : 4; /* [11:8] */ + __IO uint32_t muxh11 : 4; /* [15:12] */ + __IO uint32_t muxh12 : 4; /* [19:16] */ + __IO uint32_t muxh13 : 4; /* [23:20] */ + __IO uint32_t muxh14 : 4; /* [27:24] */ + __IO uint32_t muxh15 : 4; /* [31:28] */ + } muxh_bit; + }; + + /** + * @brief gpio clr register, offset:0x28 + */ + union + { + __IO uint32_t clr; + struct + { + __IO uint32_t iocb0 : 1; /* [0] */ + __IO uint32_t iocb1 : 1; /* [1] */ + __IO uint32_t iocb2 : 1; /* [2] */ + __IO uint32_t iocb3 : 1; /* [3] */ + __IO uint32_t iocb4 : 1; /* [4] */ + __IO uint32_t iocb5 : 1; /* [5] */ + __IO uint32_t iocb6 : 1; /* [6] */ + __IO uint32_t iocb7 : 1; /* [7] */ + __IO uint32_t iocb8 : 1; /* [8] */ + __IO uint32_t iocb9 : 1; /* [9] */ + __IO uint32_t iocb10 : 1; /* [10] */ + __IO uint32_t iocb11 : 1; /* [11] */ + __IO uint32_t iocb12 : 1; /* [12] */ + __IO uint32_t iocb13 : 1; /* [13] */ + __IO uint32_t iocb14 : 1; /* [14] */ + __IO uint32_t iocb15 : 1; /* [15] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } clr_bit; + }; + + /** + * @brief gpio reserved1 register, offset:0x2C~0x38 + */ + __IO uint32_t reserved1[4]; + + /** + * @brief gpio hdrv register, offset:0x3C + */ + union + { + __IO uint32_t hdrv; + struct + { + __IO uint32_t hdrv0 : 1; /* [0] */ + __IO uint32_t hdrv1 : 1; /* [1] */ + __IO uint32_t hdrv2 : 1; /* [2] */ + __IO uint32_t hdrv3 : 1; /* [3] */ + __IO uint32_t hdrv4 : 1; /* [4] */ + __IO uint32_t hdrv5 : 1; /* [5] */ + __IO uint32_t hdrv6 : 1; /* [6] */ + __IO uint32_t hdrv7 : 1; /* [7] */ + __IO uint32_t hdrv8 : 1; /* [8] */ + __IO uint32_t hdrv9 : 1; /* [9] */ + __IO uint32_t hdrv10 : 1; /* [10] */ + __IO uint32_t hdrv11 : 1; /* [11] */ + __IO uint32_t hdrv12 : 1; /* [12] */ + __IO uint32_t hdrv13 : 1; /* [13] */ + __IO uint32_t hdrv14 : 1; /* [14] */ + __IO uint32_t hdrv15 : 1; /* [15] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } hdrv_bit; + }; + +} gpio_type; + +/** + * @} + */ + +#define GPIOA ((gpio_type *) GPIOA_BASE) +#define GPIOB ((gpio_type *) GPIOB_BASE) +#define GPIOC ((gpio_type *) GPIOC_BASE) +#define GPIOD ((gpio_type *) GPIOD_BASE) +#define GPIOE ((gpio_type *) GPIOE_BASE) +#define GPIOF ((gpio_type *) GPIOF_BASE) +#define GPIOG ((gpio_type *) GPIOG_BASE) +#define GPIOH ((gpio_type *) GPIOH_BASE) + +/** @defgroup GPIO_exported_functions + * @{ + */ + +void gpio_reset(gpio_type *gpio_x); +void gpio_init(gpio_type *gpio_x, gpio_init_type *gpio_init_struct); +void gpio_default_para_init(gpio_init_type *gpio_init_struct); +flag_status gpio_input_data_bit_read(gpio_type *gpio_x, uint16_t pins); +uint16_t gpio_input_data_read(gpio_type *gpio_x); +flag_status gpio_output_data_bit_read(gpio_type *gpio_x, uint16_t pins); +uint16_t gpio_output_data_read(gpio_type *gpio_x); +void gpio_bits_set(gpio_type *gpio_x, uint16_t pins); +void gpio_bits_reset(gpio_type *gpio_x, uint16_t pins); +void gpio_bits_write(gpio_type *gpio_x, uint16_t pins, confirm_state bit_state); +void gpio_port_write(gpio_type *gpio_x, uint16_t port_value); +void gpio_pin_wp_config(gpio_type *gpio_x, uint16_t pins); +void gpio_pins_huge_driven_config(gpio_type *gpio_x, uint16_t pins, confirm_state new_state); +void gpio_pin_mux_config(gpio_type *gpio_x, gpio_pins_source_type gpio_pin_source, gpio_mux_sel_type gpio_mux); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_i2c.h b/armlib/at32_sys/drivers/inc/at32f435_437_i2c.h new file mode 100644 index 000000000..0d2e3ba65 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_i2c.h @@ -0,0 +1,478 @@ +/** + ************************************************************************** + * @file at32f435_437_i2c.h + * @brief at32f435_437 i2c header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_I2C_H +#define __AT32F435_437_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/** + * @brief maximum number of single transfers + */ +#define MAX_TRANSFER_CNT 255 /*!< maximum number of single transfers */ + +/** @defgroup I2C_interrupts_definition + * @brief i2c interrupt + * @{ + */ + +#define I2C_TD_INT ((uint32_t)0x00000002) /*!< i2c transmit data interrupt */ +#define I2C_RD_INT ((uint32_t)0x00000004) /*!< i2c receive data interrupt */ +#define I2C_ADDR_INT ((uint32_t)0x00000008) /*!< i2c address match interrupt */ +#define I2C_ACKFIAL_INT ((uint32_t)0x00000010) /*!< i2c ack fail interrupt */ +#define I2C_STOP_INT ((uint32_t)0x00000020) /*!< i2c stop detect interrupt */ +#define I2C_TDC_INT ((uint32_t)0x00000040) /*!< i2c transmit data complete interrupt */ +#define I2C_ERR_INT ((uint32_t)0x00000080) /*!< i2c bus error interrupt */ + +/** + * @} + */ + +/** @defgroup I2C_flags_definition + * @brief i2c flag + * @{ + */ + +#define I2C_TDBE_FLAG ((uint32_t)0x00000001) /*!< i2c transmit data buffer empty flag */ +#define I2C_TDIS_FLAG ((uint32_t)0x00000002) /*!< i2c send interrupt status */ +#define I2C_RDBF_FLAG ((uint32_t)0x00000004) /*!< i2c receive data buffer full flag */ +#define I2C_ADDRF_FLAG ((uint32_t)0x00000008) /*!< i2c 0~7 bit address match flag */ +#define I2C_ACKFAIL_FLAG ((uint32_t)0x00000010) /*!< i2c acknowledge failure flag */ +#define I2C_STOPF_FLAG ((uint32_t)0x00000020) /*!< i2c stop condition generation complete flag */ +#define I2C_TDC_FLAG ((uint32_t)0x00000040) /*!< i2c transmit data complete flag */ +#define I2C_TCRLD_FLAG ((uint32_t)0x00000080) /*!< i2c transmission is complete, waiting to load data */ +#define I2C_BUSERR_FLAG ((uint32_t)0x00000100) /*!< i2c bus error flag */ +#define I2C_ARLOST_FLAG ((uint32_t)0x00000200) /*!< i2c arbitration lost flag */ +#define I2C_OUF_FLAG ((uint32_t)0x00000400) /*!< i2c overflow or underflow flag */ +#define I2C_PECERR_FLAG ((uint32_t)0x00000800) /*!< i2c pec receive error flag */ +#define I2C_TMOUT_FLAG ((uint32_t)0x00001000) /*!< i2c smbus timeout flag */ +#define I2C_ALERTF_FLAG ((uint32_t)0x00002000) /*!< i2c smbus alert flag */ +#define I2C_BUSYF_FLAG ((uint32_t)0x00008000) /*!< i2c bus busy flag transmission mode */ +#define I2C_SDIR_FLAG ((uint32_t)0x00010000) /*!< i2c slave data transmit direction */ + +/** + * @} + */ + +/** @defgroup I2C_exported_types + * @{ + */ + +/** + * @brief i2c smbus mode set + */ +typedef enum +{ + I2C_SMBUS_MODE_DEVICE = 0x00, /*!< smbus device mode */ + I2C_SMBUS_MODE_HOST = 0x01 /*!< smbus host mode */ +} i2c_smbus_mode_type; + +/** + * @brief i2c address mode + */ +typedef enum +{ + I2C_ADDRESS_MODE_7BIT = 0x00, /*!< 7bit address mode */ + I2C_ADDRESS_MODE_10BIT = 0x01 /*!< 10bit address mode */ +} i2c_address_mode_type; + +/** + * @brief i2c transfer direction + */ +typedef enum +{ + I2C_DIR_TRANSMIT = 0x00, /*!< master request a write transfer */ + I2C_DIR_RECEIVE = 0x01 /*!< master request a read transfer */ +} i2c_transfer_dir_type; + +/** + * @brief i2c dma requests direction + */ +typedef enum +{ + I2C_DMA_REQUEST_TX = 0x00, /*!< dma transmit request */ + I2C_DMA_REQUEST_RX = 0x01 /*!< dma receive request */ +} i2c_dma_request_type; + +/** + * @brief i2c smbus alert pin set + */ +typedef enum +{ + I2C_SMBUS_ALERT_HIGH = 0x00, /*!< smbus alert pin set high */ + I2C_SMBUS_ALERT_LOW = 0x01 /*!< smbus alert pin set low */ +} i2c_smbus_alert_set_type; + +/** + * @brief i2c clock timeout detection mode + */ +typedef enum +{ + I2C_TIMEOUT_DETCET_LOW = 0x00, /*!< detect low level timeout */ + I2C_TIMEOUT_DETCET_HIGH = 0x01 /*!< detect high level timeout */ +} i2c_timeout_detcet_type; + +/** + * @brief i2c own address2 mask + */ +typedef enum +{ + I2C_ADDR2_NOMASK = 0x00, /*!< compare bit [7:1] */ + I2C_ADDR2_MASK01 = 0x01, /*!< only compare bit [7:2] */ + I2C_ADDR2_MASK02 = 0x02, /*!< only compare bit [7:3] */ + I2C_ADDR2_MASK03 = 0x03, /*!< only compare bit [7:4] */ + I2C_ADDR2_MASK04 = 0x04, /*!< only compare bit [7:5] */ + I2C_ADDR2_MASK05 = 0x05, /*!< only compare bit [7:6] */ + I2C_ADDR2_MASK06 = 0x06, /*!< only compare bit [7] */ + I2C_ADDR2_MASK07 = 0x07 /*!< response all addresses other than those reserved for i2c */ +} i2c_addr2_mask_type; + +/** + * @brief i2c reload end mode + */ +typedef enum +{ + I2C_AUTO_STOP_MODE = 0x02000000, /*!< auto generate stop mode */ + I2C_SOFT_STOP_MODE = 0x00000000, /*!< soft generate stop mode */ + I2C_RELOAD_MODE = 0x01000000 /*!< reload mode */ +} i2c_reload_stop_mode_type; + +/** + * @brief i2c start mode + */ +typedef enum +{ + I2C_WITHOUT_START = 0x00000000, /*!< transfer data without start condition */ + I2C_GEN_START_READ = 0x00002400, /*!< read data and generate start */ + I2C_GEN_START_WRITE = 0x00002000 /*!< send data and generate start */ +} i2c_start_mode_type; + +/** + * @brief type define i2c register all + */ +typedef struct +{ + /** + * @brief i2c ctrl1 register, offset:0x00 + */ + union + { + __IO uint32_t ctrl1; + struct + { + __IO uint32_t i2cen : 1; /* [0] */ + __IO uint32_t tdien : 1; /* [1] */ + __IO uint32_t rdien : 1; /* [2] */ + __IO uint32_t addrien : 1; /* [3] */ + __IO uint32_t ackfailien : 1; /* [4] */ + __IO uint32_t stopien : 1; /* [5] */ + __IO uint32_t tdcien : 1; /* [6] */ + __IO uint32_t errien : 1; /* [7] */ + __IO uint32_t dflt : 4; /* [11:8] */ + __IO uint32_t reserved1 : 2; /* [13:12] */ + __IO uint32_t dmaten : 1; /* [14] */ + __IO uint32_t dmaren : 1; /* [15] */ + __IO uint32_t sctrl : 1; /* [16] */ + __IO uint32_t stretch : 1; /* [17] */ + __IO uint32_t reserved2 : 1; /* [18] */ + __IO uint32_t gcaen : 1; /* [19] */ + __IO uint32_t haddren : 1; /* [20] */ + __IO uint32_t devaddren : 1; /* [21] */ + __IO uint32_t smbalert : 1; /* [22] */ + __IO uint32_t pecen : 1; /* [23] */ + __IO uint32_t reserved3 : 8; /* [31:24] */ + } ctrl1_bit; + }; + + /** + * @brief i2c ctrl2 register, offset:0x04 + */ + union + { + __IO uint32_t ctrl2; + struct + { + __IO uint32_t saddr : 10;/* [9:0] */ + __IO uint32_t dir : 1; /* [10] */ + __IO uint32_t addr10 : 1; /* [11] */ + __IO uint32_t readh10 : 1; /* [12] */ + __IO uint32_t genstart : 1; /* [13] */ + __IO uint32_t genstop : 1; /* [14] */ + __IO uint32_t nacken : 1; /* [15] */ + __IO uint32_t cnt : 8; /* [23:16] */ + __IO uint32_t rlden : 1; /* [24] */ + __IO uint32_t astopen : 1; /* [25] */ + __IO uint32_t pecten : 1; /* [26] */ + __IO uint32_t reserved1 : 5; /* [31:27] */ + } ctrl2_bit; + }; + + /** + * @brief i2c oaddr1 register, offset:0x08 + */ + union + { + __IO uint32_t oaddr1; + struct + { + __IO uint32_t addr1 : 10;/* [9:0] */ + __IO uint32_t addr1mode : 1; /* [10] */ + __IO uint32_t reserved1 : 4; /* [14:11] */ + __IO uint32_t addr1en : 1; /* [15] */ + __IO uint32_t reserved2 : 16;/* [31:16] */ + } oaddr1_bit; + }; + + /** + * @brief i2c oaddr2 register, offset:0x0c + */ + union + { + __IO uint32_t oaddr2; + struct + { + __IO uint32_t reserved1 : 1; /* [0] */ + __IO uint32_t addr2 : 7; /* [7:1] */ + __IO uint32_t addr2mask : 3; /* [10:8] */ + __IO uint32_t reserved2 : 4; /* [14:11] */ + __IO uint32_t addr2en : 1; /* [15] */ + __IO uint32_t reserved3 : 16;/* [31:16] */ + } oaddr2_bit; + }; + + /** + * @brief i2c clkctrl register, offset:0x10 + */ + union + { + __IO uint32_t clkctrl; + struct + { + __IO uint32_t scll : 8; /* [7:0] */ + __IO uint32_t sclh : 8; /* [15:8] */ + __IO uint32_t sdad : 4; /* [19:16] */ + __IO uint32_t scld : 4; /* [23:20] */ + __IO uint32_t divh : 4; /* [27:24] */ + __IO uint32_t divl : 4; /* [31:28] */ + } clkctrl_bit; + }; + + /** + * @brief i2c timeout register, offset:0x14 + */ + union + { + __IO uint32_t timeout; + struct + { + __IO uint32_t totime : 12;/* [11:0] */ + __IO uint32_t tomode : 1; /* [12] */ + __IO uint32_t reserved1 : 2; /* [14:13] */ + __IO uint32_t toen : 1; /* [15] */ + __IO uint32_t exttime : 12;/* [27:16] */ + __IO uint32_t reserved2 : 3; /* [30:28] */ + __IO uint32_t exten : 1; /* [31] */ + } timeout_bit; + }; + + /** + * @brief i2c sts register, offset:0x18 + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t tdbe : 1; /* [0] */ + __IO uint32_t tdis : 1; /* [1] */ + __IO uint32_t rdbf : 1; /* [2] */ + __IO uint32_t addrf : 1; /* [3] */ + __IO uint32_t ackfail : 1; /* [4] */ + __IO uint32_t stopf : 1; /* [5] */ + __IO uint32_t tdc : 1; /* [6] */ + __IO uint32_t tcrld : 1; /* [7] */ + __IO uint32_t buserr : 1; /* [8] */ + __IO uint32_t arlost : 1; /* [9] */ + __IO uint32_t ouf : 1; /* [10] */ + __IO uint32_t pecerr : 1; /* [11] */ + __IO uint32_t tmout : 1; /* [12] */ + __IO uint32_t alertf : 1; /* [13] */ + __IO uint32_t reserved1 : 1; /* [14] */ + __IO uint32_t busyf : 1; /* [15] */ + __IO uint32_t sdir : 1; /* [16] */ + __IO uint32_t addr : 7; /* [23:17] */ + __IO uint32_t reserved2 : 8; /* [31:24] */ + } sts_bit; + }; + + /** + * @brief i2c clr register, offset:0x1c + */ + union + { + __IO uint32_t clr; + struct + { + __IO uint32_t reserved1 : 3; /* [2:0] */ + __IO uint32_t addrc : 1; /* [3] */ + __IO uint32_t ackfailc : 1; /* [4] */ + __IO uint32_t stopc : 1; /* [5] */ + __IO uint32_t reserved2 : 2; /* [6:7] */ + __IO uint32_t buserrc : 1; /* [8] */ + __IO uint32_t arlostc : 1; /* [9] */ + __IO uint32_t oufc : 1; /* [10] */ + __IO uint32_t pecerrc : 1; /* [11] */ + __IO uint32_t tmoutc : 1; /* [12] */ + __IO uint32_t alertc : 1; /* [13] */ + __IO uint32_t reserved3 : 18;/* [31:14] */ + } clr_bit; + }; + + /** + * @brief i2c pec register, offset:0x20 + */ + union + { + __IO uint32_t pec; + struct + { + __IO uint32_t pecval : 8; /* [7:0] */ + __IO uint32_t reserved1 : 24;/* [31:8] */ + } pec_bit; + }; + + /** + * @brief i2c rxdt register, offset:0x20 + */ + union + { + __IO uint32_t rxdt; + struct + { + __IO uint32_t dt : 8; /* [7:0] */ + __IO uint32_t reserved1 : 24;/* [31:8] */ + } rxdt_bit; + }; + + /** + * @brief i2c txdt register, offset:0x20 + */ + union + { + __IO uint32_t txdt; + struct + { + __IO uint32_t dt : 8; /* [7:0] */ + __IO uint32_t reserved1 : 24;/* [31:8] */ + } txdt_bit; + }; + +} i2c_type; + +/** + * @} + */ + +#define I2C1 ((i2c_type *) I2C1_BASE) +#define I2C2 ((i2c_type *) I2C2_BASE) +#define I2C3 ((i2c_type *) I2C3_BASE) + +/** @defgroup I2C_exported_functions + * @{ + */ + +void i2c_reset(i2c_type *i2c_x); +void i2c_init(i2c_type *i2c_x, uint8_t dfilters, uint32_t clk); +void i2c_own_address1_set(i2c_type *i2c_x, i2c_address_mode_type mode, uint16_t address); +void i2c_own_address2_set(i2c_type *i2c_x, uint8_t address, i2c_addr2_mask_type mask); +void i2c_own_address2_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_smbus_enable(i2c_type *i2c_x, i2c_smbus_mode_type mode, confirm_state new_state); +void i2c_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_clock_stretch_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_ack_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_addr10_mode_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_transfer_addr_set(i2c_type *i2c_x, uint16_t address); +uint16_t i2c_transfer_addr_get(i2c_type *i2c_x); +void i2c_transfer_dir_set(i2c_type *i2c_x, i2c_transfer_dir_type i2c_direction); +i2c_transfer_dir_type i2c_transfer_dir_get(i2c_type *i2c_x); +uint8_t i2c_matched_addr_get(i2c_type *i2c_x); +void i2c_auto_stop_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_reload_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_cnt_set(i2c_type *i2c_x, uint8_t cnt); +void i2c_addr10_header_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_general_call_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_smbus_alert_set(i2c_type *i2c_x, i2c_smbus_alert_set_type level); +void i2c_slave_data_ctrl_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_pec_calculate_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_pec_transmit_enable(i2c_type *i2c_x, confirm_state new_state); +uint8_t i2c_pec_value_get(i2c_type *i2c_x); +void i2c_timeout_set(i2c_type *i2c_x, uint16_t timeout); +void i2c_timeout_detcet_set(i2c_type *i2c_x, i2c_timeout_detcet_type mode); +void i2c_timeout_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_ext_timeout_set(i2c_type *i2c_x, uint16_t timeout); +void i2c_ext_timeout_enable(i2c_type *i2c_x, confirm_state new_state); +void i2c_interrupt_enable(i2c_type *i2c_x, uint32_t source, confirm_state new_state); +flag_status i2c_interrupt_get(i2c_type *i2c_x, uint16_t source); +void i2c_dma_enable(i2c_type *i2c_x, i2c_dma_request_type dma_req, confirm_state new_state); +void i2c_transmit_set(i2c_type *i2c_x, uint16_t address, uint8_t cnt, i2c_reload_stop_mode_type rld_stop, i2c_start_mode_type start); +void i2c_start_generate(i2c_type *i2c_x); +void i2c_stop_generate(i2c_type *i2c_x); +void i2c_data_send(i2c_type *i2c_x, uint8_t data); +uint8_t i2c_data_receive(i2c_type *i2c_x); +flag_status i2c_flag_get(i2c_type *i2c_x, uint32_t flag); +flag_status i2c_interrupt_flag_get(i2c_type *i2c_x, uint32_t flag); +void i2c_flag_clear(i2c_type *i2c_x, uint32_t flag); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_misc.h b/armlib/at32_sys/drivers/inc/at32f435_437_misc.h new file mode 100644 index 000000000..6189983be --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_misc.h @@ -0,0 +1,123 @@ +/** + ************************************************************************** + * @file at32f435_437_misc.h + * @brief at32f435_437 misc header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_MISC_H +#define __AT32F435_437_MISC_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup MISC + * @{ + */ + +/** @defgroup MISC_vector_table_base_address + * @{ + */ + +#define NVIC_VECTTAB_RAM ((uint32_t)0x20000000) /*!< nvic vector table based ram address */ +#define NVIC_VECTTAB_FLASH ((uint32_t)0x08000000) /*!< nvic vector table based flash address */ + +/** + * @} + */ + +/** @defgroup MISC_exported_types + * @{ + */ + +/** + * @brief nvic interrupt priority group + */ +typedef enum +{ + NVIC_PRIORITY_GROUP_0 = ((uint32_t)0x7), /*!< 0 bits for preemption priority, 4 bits for subpriority */ + NVIC_PRIORITY_GROUP_1 = ((uint32_t)0x6), /*!< 1 bits for preemption priority, 3 bits for subpriority */ + NVIC_PRIORITY_GROUP_2 = ((uint32_t)0x5), /*!< 2 bits for preemption priority, 2 bits for subpriority */ + NVIC_PRIORITY_GROUP_3 = ((uint32_t)0x4), /*!< 3 bits for preemption priority, 1 bits for subpriority */ + NVIC_PRIORITY_GROUP_4 = ((uint32_t)0x3) /*!< 4 bits for preemption priority, 0 bits for subpriority */ +} nvic_priority_group_type; + +/** + * @brief nvic low power mode + */ +typedef enum +{ + NVIC_LP_SLEEPONEXIT = 0x02, /*!< enable sleep-on-exit feature */ + NVIC_LP_SLEEPDEEP = 0x04, /*!< enable sleep-deep output signal when entering sleep mode */ + NVIC_LP_SEVONPEND = 0x10 /*!< send event on pending */ +} nvic_lowpower_mode_type; + +/** + * @brief systick clock source + */ +typedef enum +{ + SYSTICK_CLOCK_SOURCE_AHBCLK_DIV8 = ((uint32_t)0x00000000), /*!< systick clock source from core clock div8 */ + SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV = ((uint32_t)0x00000004) /*!< systick clock source from core clock */ +} systick_clock_source_type; + +/** + * @} + */ + +/** @defgroup MISC_exported_functions + * @{ + */ + +void nvic_system_reset(void); +void nvic_irq_enable(IRQn_Type irqn, uint32_t preempt_priority, uint32_t sub_priority); +void nvic_irq_disable(IRQn_Type irqn); +void nvic_priority_group_config(nvic_priority_group_type priority_group); +void nvic_vector_table_set(uint32_t base, uint32_t offset); +void nvic_lowpower_mode_config(nvic_lowpower_mode_type lp_mode, confirm_state new_state); +void systick_clock_source_config(systick_clock_source_type source); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_pwc.h b/armlib/at32_sys/drivers/inc/at32f435_437_pwc.h new file mode 100644 index 000000000..95400a0b0 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_pwc.h @@ -0,0 +1,228 @@ +/** + ************************************************************************** + * @file at32f435_437_pwc.h + * @brief at32f435_437 pwr header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_PWC_H +#define __AT32F435_437_PWC_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup PWC + * @{ + */ + +/** @defgroup PWC_flags_definition + * @brief pwc flag + * @{ + */ + +#define PWC_WAKEUP_FLAG ((uint32_t)0x00000001) /*!< wakeup flag */ +#define PWC_STANDBY_FLAG ((uint32_t)0x00000002) /*!< standby flag */ +#define PWC_PVM_OUTPUT_FLAG ((uint32_t)0x00000004) /*!< pvm output flag */ + +/** + * @} + */ + +/** + * @brief pwc wakeup pin num definition + */ +#define PWC_WAKEUP_PIN_1 ((uint32_t)0x00000100) /*!< standby wake-up pin1(pa0) */ +#define PWC_WAKEUP_PIN_2 ((uint32_t)0x00000200) /*!< standby wake-up pin2(pc13) */ + +/** + * @brief select ldo output voltage. + * @param val: set the ldo output voltage. + * this parameter can be one of the following values: + * - PWC_LDO_OUTPUT_1V3: system clock up to 288MHz. + * - PWC_LDO_OUTPUT_1V2: system clock up to 240MHz. + * - PWC_LDO_OUTPUT_1V1: system clock up to 144MHz. + * @note useage limited. + * PWC_LDO_OUTPUT_1V3: operation temperature range -40~85 degree, VDD must over 3.0V. + */ +#define pwc_ldo_output_voltage_set(val) (PWC->ldoov_bit.ldoovsel = val) + +/** @defgroup PWC_exported_types + * @{ + */ + +/** + * @brief pwc pvm voltage type + */ +typedef enum +{ + PWC_PVM_VOLTAGE_2V3 = 0x01, /*!< power voltage monitoring boundary 2.3v */ + PWC_PVM_VOLTAGE_2V4 = 0x02, /*!< power voltage monitoring boundary 2.4v */ + PWC_PVM_VOLTAGE_2V5 = 0x03, /*!< power voltage monitoring boundary 2.5v */ + PWC_PVM_VOLTAGE_2V6 = 0x04, /*!< power voltage monitoring boundary 2.6v */ + PWC_PVM_VOLTAGE_2V7 = 0x05, /*!< power voltage monitoring boundary 2.7v */ + PWC_PVM_VOLTAGE_2V8 = 0x06, /*!< power voltage monitoring boundary 2.8v */ + PWC_PVM_VOLTAGE_2V9 = 0x07 /*!< power voltage monitoring boundary 2.9v */ +} pwc_pvm_voltage_type; + +/** + * @brief pwc ldo output voltage type + */ +typedef enum +{ + PWC_LDO_OUTPUT_1V3 = 0x01, /*!< ldo output voltage is 1.3v */ + PWC_LDO_OUTPUT_1V2 = 0x00, /*!< ldo output voltage is 1.2v */ + PWC_LDO_OUTPUT_1V1 = 0x04 /*!< ldo output voltage is 1.1v */ +} pwc_ldo_output_voltage_type; + +/** + * @brief pwc sleep enter type + */ +typedef enum +{ + PWC_SLEEP_ENTER_WFI = 0x00, /*!< use wfi enter sleep mode */ + PWC_SLEEP_ENTER_WFE = 0x01 /*!< use wfe enter sleep mode */ +} pwc_sleep_enter_type ; + +/** + * @brief pwc deep sleep enter type + */ +typedef enum +{ + PWC_DEEP_SLEEP_ENTER_WFI = 0x00, /*!< use wfi enter deepsleep mode */ + PWC_DEEP_SLEEP_ENTER_WFE = 0x01 /*!< use wfe enter deepsleep mode */ +} pwc_deep_sleep_enter_type ; + +/** + * @brief pwc regulator type + */ +typedef enum +{ + PWC_REGULATOR_ON = 0x00, /*!< voltage regulator state on when deepsleep mode */ + PWC_REGULATOR_LOW_POWER = 0x01 /*!< voltage regulator state low power when deepsleep mode */ +} pwc_regulator_type ; + +/** + * @brief type define pwc register all + */ +typedef struct +{ + /** + * @brief pwc ctrl register, offset:0x00 + */ + union + { + __IO uint32_t ctrl; + struct + { + __IO uint32_t vrsel : 1; /* [0] */ + __IO uint32_t lpsel : 1; /* [1] */ + __IO uint32_t clswef : 1; /* [2] */ + __IO uint32_t clsef : 1; /* [3] */ + __IO uint32_t pvmen : 1; /* [4] */ + __IO uint32_t pvmsel : 3; /* [7:5] */ + __IO uint32_t bpwen : 1; /* [8] */ + __IO uint32_t reserved1 : 23;/* [31:9] */ + } ctrl_bit; + }; + + /** + * @brief pwc ctrlsts register, offset:0x04 + */ + union + { + __IO uint32_t ctrlsts; + struct + { + __IO uint32_t swef : 1; /* [0] */ + __IO uint32_t sef : 1; /* [1] */ + __IO uint32_t pvmof : 1; /* [2] */ + __IO uint32_t reserved1 : 5; /* [7:3] */ + __IO uint32_t swpen1 : 1; /* [8] */ + __IO uint32_t swpen2 : 1; /* [9] */ + __IO uint32_t reserved2 : 22;/* [31:10] */ + } ctrlsts_bit; + }; + + __IO uint32_t reserved1[2]; + + /** + * @brief pwc ldoov register, offset:0x10 + */ + union + { + __IO uint32_t ldoov; + struct + { + __IO uint32_t ldoovsel : 3; /* [2:0] */ + __IO uint32_t reserved1 : 29;/* [31:3] */ + } ldoov_bit; + }; + +} pwc_type; + +/** + * @} + */ + +#define PWC ((pwc_type *) PWC_BASE) + +/** @defgroup PWC_exported_functions + * @{ + */ + +void pwc_reset(void); +void pwc_battery_powered_domain_access(confirm_state new_state); +void pwc_pvm_level_select(pwc_pvm_voltage_type pvm_voltage); +void pwc_power_voltage_monitor_enable(confirm_state new_state); +void pwc_wakeup_pin_enable(uint32_t pin_num, confirm_state new_state); +void pwc_flag_clear(uint32_t pwc_flag); +flag_status pwc_flag_get(uint32_t pwc_flag); +void pwc_sleep_mode_enter(pwc_sleep_enter_type pwc_sleep_enter); +void pwc_deep_sleep_mode_enter(pwc_deep_sleep_enter_type pwc_deep_sleep_enter); +void pwc_voltage_regulate_set(pwc_regulator_type pwc_regulator); +void pwc_standby_mode_enter(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_qspi.h b/armlib/at32_sys/drivers/inc/at32f435_437_qspi.h new file mode 100644 index 000000000..d15785170 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_qspi.h @@ -0,0 +1,563 @@ +/** + ************************************************************************** + * @file at32f435_437_qspi.h + * @brief at32f435_437 qspi header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_QSPI_H +#define __AT32F435_437_QSPI_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup QSPI + * @{ + */ + +/** @defgroup QSPI_flags_definition + * @brief qspi flag + * @{ + */ + +#define QSPI_CMDSTS_FLAG ((uint32_t)0x00000001) /*!< qspi command complete status flag */ +#define QSPI_RXFIFORDY_FLAG ((uint32_t)0x00000002) /*!< qspi rxfifo ready status flag */ +#define QSPI_TXFIFORDY_FLAG ((uint32_t)0x00000004) /*!< qspi txfifo ready status flag */ + +/** + * @} + */ + +/** @defgroup QSPI_exported_types + * @{ + */ + +/** + * @brief qspi xip read access mode type + */ +typedef enum +{ + QSPI_XIPR_SEL_MODED = 0x00, /*!< qspi xip read select mode d */ + QSPI_XIPR_SEL_MODET = 0x01 /*!< qspi xip read select mode t */ +} qspi_xip_read_sel_type; + +/** + * @brief qspi xip write access mode type + */ +typedef enum +{ + QSPI_XIPW_SEL_MODED = 0x00, /*!< qspi xip write select mode d */ + QSPI_XIPW_SEL_MODET = 0x01 /*!< qspi xip write select mode t */ +} qspi_xip_write_sel_type; + +/** + * @brief qspi busy bit offset position in status register type + */ +typedef enum +{ + QSPI_BUSY_OFFSET_0 = 0x00, /*!< qspi busy bit offset position 0 */ + QSPI_BUSY_OFFSET_1 = 0x01, /*!< qspi busy bit offset position 1 */ + QSPI_BUSY_OFFSET_2 = 0x02, /*!< qspi busy bit offset position 2 */ + QSPI_BUSY_OFFSET_3 = 0x03, /*!< qspi busy bit offset position 3 */ + QSPI_BUSY_OFFSET_4 = 0x04, /*!< qspi busy bit offset position 4 */ + QSPI_BUSY_OFFSET_5 = 0x05, /*!< qspi busy bit offset position 5 */ + QSPI_BUSY_OFFSET_6 = 0x06, /*!< qspi busy bit offset position 6 */ + QSPI_BUSY_OFFSET_7 = 0x07 /*!< qspi busy bit offset position 7 */ +} qspi_busy_pos_type; + +/** + * @brief qspi read status configure type + */ +typedef enum +{ + QSPI_RSTSC_HW_AUTO = 0x00, /*!< qspi read status by hardware */ + QSPI_RSTSC_SW_ONCE = 0x01 /*!< qspi read status by software */ +} qspi_read_status_conf_type; + +/** + * @brief qspi operate mode type + */ +typedef enum +{ + QSPI_OPERATE_MODE_111 = 0x00, /*!< qspi serial mode */ + QSPI_OPERATE_MODE_112 = 0x01, /*!< qspi dual mode */ + QSPI_OPERATE_MODE_114 = 0x02, /*!< qspi quad mode */ + QSPI_OPERATE_MODE_122 = 0x03, /*!< qspi dual i/o mode */ + QSPI_OPERATE_MODE_144 = 0x04, /*!< qspi quad i/o mode */ + QSPI_OPERATE_MODE_222 = 0x05, /*!< qspi instruction 2-bit mode */ + QSPI_OPERATE_MODE_444 = 0x06 /*!< qspi instruction 4-bit mode(qpi) */ +} qspi_operate_mode_type; + +/** + * @brief qspi clock division type + */ +typedef enum +{ + QSPI_CLK_DIV_2 = 0x00, /*!< qspi clk divide by 2 */ + QSPI_CLK_DIV_3 = 0x04, /*!< qspi clk divide by 3 */ + QSPI_CLK_DIV_4 = 0x01, /*!< qspi clk divide by 4 */ + QSPI_CLK_DIV_5 = 0x05, /*!< qspi clk divide by 5 */ + QSPI_CLK_DIV_6 = 0x02, /*!< qspi clk divide by 6 */ + QSPI_CLK_DIV_8 = 0x03, /*!< qspi clk divide by 8 */ + QSPI_CLK_DIV_10 = 0x06, /*!< qspi clk divide by 10 */ + QSPI_CLK_DIV_12 = 0x07 /*!< qspi clk divide by 12 */ +} qspi_clk_div_type; + +/** + * @brief qspi command port address length type + */ +typedef enum +{ + QSPI_CMD_ADRLEN_0_BYTE = 0x00, /*!< qspi no address */ + QSPI_CMD_ADRLEN_1_BYTE = 0x01, /*!< qspi address length 1 byte */ + QSPI_CMD_ADRLEN_2_BYTE = 0x02, /*!< qspi address length 2 byte */ + QSPI_CMD_ADRLEN_3_BYTE = 0x03, /*!< qspi address length 3 byte */ + QSPI_CMD_ADRLEN_4_BYTE = 0x04 /*!< qspi address length 4 byte */ +} qspi_cmd_adrlen_type; + +/** + * @brief qspi command port instruction length type + */ +typedef enum +{ + QSPI_CMD_INSLEN_0_BYTE = 0x00, /*!< qspi no instruction code */ + QSPI_CMD_INSLEN_1_BYTE = 0x01, /*!< qspi instruction code 1 byte */ + QSPI_CMD_INSLEN_2_BYTE = 0x02 /*!< qspi instruction code 2 byte(repeat) */ +} qspi_cmd_inslen_type; + +/** + * @brief qspi xip r/w address length type + */ +typedef enum +{ + QSPI_XIP_ADDRLEN_3_BYTE = 0x00, /*!< qspi xip address length 3 byte */ + QSPI_XIP_ADDRLEN_4_BYTE = 0x01 /*!< qspi xip address length 4 byte */ +} qspi_xip_addrlen_type; + +/** + * @brief qspi sckout mode type + */ +typedef enum +{ + QSPI_SCK_MODE_0 = 0x00, /*!< qspi sck mode 0 */ + QSPI_SCK_MODE_3 = 0x01 /*!< qspi sck mode 3 */ +} qspi_clk_mode_type; + +/** + * @brief qspi dma tx/rx fifo threshold type + */ +typedef enum +{ + QSPI_DMA_FIFO_THOD_WORD08 = 0x00, /*!< qspi dma fifo threshold 8 words */ + QSPI_DMA_FIFO_THOD_WORD16 = 0x01, /*!< qspi dma fifo threshold 16 words */ + QSPI_DMA_FIFO_THOD_WORD24 = 0x02 /*!< qspi dma fifo threshold 24 words */ +} qspi_dma_fifo_thod_type; + +/** + * @brief qspi cmd type + */ +typedef struct +{ + confirm_state pe_mode_enable; /*!< performance enhance mode enable */ + uint8_t pe_mode_operate_code; /*!< performance enhance mode operate code */ + uint8_t instruction_code; /*!< instruction code */ + qspi_cmd_inslen_type instruction_length; /*!< instruction code length */ + uint32_t address_code; /*!< address code */ + qspi_cmd_adrlen_type address_length; /*!< address legnth */ + uint32_t data_counter; /*!< read/write data counter */ + uint8_t second_dummy_cycle_num; /*!< number of second dummy state cycle 0~32 */ + qspi_operate_mode_type operation_mode; /*!< operation mode */ + qspi_read_status_conf_type read_status_config; /*!< config to read status */ + confirm_state read_status_enable; /*!< enable to read status */ + confirm_state write_data_enable; /*!< enable to write data */ +} qspi_cmd_type; + +/** + * @brief qspi xip type + */ +typedef struct +{ + uint8_t read_instruction_code; /*!< read instruction code */ + qspi_xip_addrlen_type read_address_length; /*!< read address legnth */ + qspi_operate_mode_type read_operation_mode; /*!< read operation mode */ + uint8_t read_second_dummy_cycle_num; /*!< read number of second dummy state cycle 0~32 */ + uint8_t write_instruction_code; /*!< write instruction code */ + qspi_xip_addrlen_type write_address_length; /*!< write address legnth */ + qspi_operate_mode_type write_operation_mode; /*!< write operation mode */ + uint8_t write_second_dummy_cycle_num; /*!< write number of second dummy state cycle 0~32 */ + qspi_xip_write_sel_type write_select_mode; /*!< write mode d or mode t selection */ + uint8_t write_time_counter; /*!< write count for mode t */ + uint8_t write_data_counter; /*!< write count for mode d */ + qspi_xip_read_sel_type read_select_mode; /*!< read mode d or mode t selection */ + uint8_t read_time_counter; /*!< read count for mode t */ + uint8_t read_data_counter; /*!< read count for mode d */ +} qspi_xip_type; + +/** + * @brief type define qspi register all + */ +typedef struct +{ + /** + * @brief qspi cmd_w0 register, offset:0x00 + */ + union + { + __IO uint32_t cmd_w0; + struct + { + + __IO uint32_t spiadr : 32;/* [31:0] */ + } cmd_w0_bit; + }; + + /** + * @brief qspi cmd_w1 register, offset:0x04 + */ + union + { + __IO uint32_t cmd_w1; + struct + { + __IO uint32_t adrlen : 3; /* [2:0] */ + __IO uint32_t reserved1 : 13;/* [15:3] */ + __IO uint32_t dum2 : 8; /* [23:16] */ + __IO uint32_t inslen : 2; /* [25:24] */ + __IO uint32_t reserved2 : 2; /* [27:26] */ + __IO uint32_t pemen : 1; /* [28] */ + __IO uint32_t reserved3 : 3; /* [31:29] */ + } cmd_w1_bit; + }; + + /** + * @brief qspi cmd_w2 register, offset:0x08 + */ + union + { + __IO uint32_t cmd_w2; + struct + { + __IO uint32_t dcnt : 32;/* [31:0] */ + } cmd_w2_bit; + }; + + /** + * @brief qspi cmd_w3 register, offset:0x0C + */ + union + { + __IO uint32_t cmd_w3; + struct + { + __IO uint32_t reserved1 : 1; /* [0] */ + __IO uint32_t wen : 1; /* [1] */ + __IO uint32_t rstsen : 1; /* [2] */ + __IO uint32_t rstsc : 1; /* [3] */ + __IO uint32_t reserved2 : 1; /* [4] */ + __IO uint32_t opmode : 3; /* [7:5] */ + __IO uint32_t reserved3 : 8; /* [15:8] */ + __IO uint32_t pemopc : 8; /* [23:16] */ + __IO uint32_t insc : 8; /* [31:24] */ + } cmd_w3_bit; + }; + + /** + * @brief qspi ctrl register, offset:0x10 + */ + union + { + __IO uint32_t ctrl; + struct + { + __IO uint32_t clkdiv : 3; /* [2:0] */ + __IO uint32_t reserved1 : 1; /* [3] */ + __IO uint32_t sckmode : 1; /* [4] */ + __IO uint32_t reserved2 : 2; /* [6:5] */ + __IO uint32_t xipidle : 1; /* [7] */ + __IO uint32_t abort : 1; /* [8] */ + __IO uint32_t reserved3 : 7; /* [15:9] */ + __IO uint32_t busy : 3; /* [18:16] */ + __IO uint32_t xiprcmdf : 1; /* [19] */ + __IO uint32_t xipsel : 1; /* [20] */ + __IO uint32_t keyen : 1; /* [21] */ + __IO uint32_t reserved4 : 10;/* [31:22] */ + } ctrl_bit; + }; + + /** + * @brief qspi register, offset:0x14 + */ + __IO uint32_t reserved0; + + /** + * @brief qspi fifosts register, offset:0x18 + */ + union + { + __IO uint32_t fifosts; + struct + { + __IO uint32_t txfifordy : 1; /* [0] */ + __IO uint32_t rxfifordy : 1; /* [1] */ + __IO uint32_t reserved1 : 30;/* [31:2] */ + } fifosts_bit; + }; + + /** + * @brief qspi reserved register, offset:0x1C + */ + __IO uint32_t reserved1; + + /** + * @brief qspi ctrl2 register, offset:0x20 + */ + union + { + __IO uint32_t ctrl2; + struct + { + __IO uint32_t dmaen : 1; /* [0] */ + __IO uint32_t cmdie : 1; /* [1] */ + __IO uint32_t reserved1 : 6; /* [7:2] */ + __IO uint32_t txfifo_thod : 2; /* [9:8] */ + __IO uint32_t reserved2 : 2; /* [11:10] */ + __IO uint32_t rxfifo_thod : 2; /* [13:12] */ + __IO uint32_t reserved3 : 18;/* [31:14] */ + } ctrl2_bit; + }; + + /** + * @brief qspi cmdsts register, offset:0x24 + */ + union + { + __IO uint32_t cmdsts; + struct + { + __IO uint32_t cmdsts : 1; /* [0] */ + __IO uint32_t reserved1 : 31;/* [31:1] */ + } cmdsts_bit; + }; + + /** + * @brief qspi rsts register, offset:0x28 + */ + union + { + __IO uint32_t rsts; + struct + { + __IO uint32_t spists : 8; /* [7:0] */ + __IO uint32_t reserved1 : 24;/* [31:8] */ + } rsts_bit; + }; + + /** + * @brief qspi fsize register, offset:0x2C + */ + union + { + __IO uint32_t fsize; + struct + { + __IO uint32_t spifsize : 32;/* [31:0] */ + } fsize_bit; + }; + + /** + * @brief qspi xip_cmd_w0 register, offset:0x30 + */ + union + { + __IO uint32_t xip_cmd_w0; + struct + { + __IO uint32_t xipr_dum2 : 8; /* [7:0] */ + __IO uint32_t xipr_opmode : 3; /* [10:8] */ + __IO uint32_t xipr_adrlen : 1; /* [11] */ + __IO uint32_t xipr_insc : 8; /* [19:12] */ + __IO uint32_t reserved1 : 12;/* [31:20] */ + } xip_cmd_w0_bit; + }; + + /** + * @brief qspi xip_cmd_w1 register, offset:0x34 + */ + union + { + __IO uint32_t xip_cmd_w1; + struct + { + __IO uint32_t xipr_dum2 : 8; /* [7:0] */ + __IO uint32_t xipr_opmode : 3; /* [10:8] */ + __IO uint32_t xipr_adrlen : 1; /* [11] */ + __IO uint32_t xipr_insc : 8; /* [19:12] */ + __IO uint32_t reserved1 : 12;/* [31:20] */ + } xip_cmd_w1_bit; + }; + + /** + * @brief qspi xip_cmd_w2 register, offset:0x38 + */ + union + { + __IO uint32_t xip_cmd_w2; + struct + { + __IO uint32_t xipr_dcnt : 5; /* [4:0] */ + __IO uint32_t reserved1 : 3; /* [7:5] */ + __IO uint32_t xipr_tcnt : 7; /* [14:8] */ + __IO uint32_t xipr_sel : 1; /* [15] */ + __IO uint32_t xipw_dcnt : 5; /* [20:16] */ + __IO uint32_t reserved2 : 3; /* [23:21] */ + __IO uint32_t xipw_tcnt : 7; /* [30:24] */ + __IO uint32_t xipw_sel : 1; /* [31] */ + } xip_cmd_w2_bit; + }; + + /** + * @brief qspi xip_cmd_w3 register, offset:0x3C + */ + union + { + __IO uint32_t xip_cmd_w3; + struct + { + __IO uint32_t bypassc : 1; /* [0] */ + __IO uint32_t reserved1 : 2; /* [2:1] */ + __IO uint32_t csts : 1; /* [3] */ + __IO uint32_t reserved2 : 28;/* [31:4] */ + } xip_cmd_w3_bit; + }; + + /** + * @brief qspi ctrl3 register, offset:0x40 + */ + union + { + __IO uint32_t ctrl3; + struct + { + __IO uint32_t ispd : 6; /* [5:0] */ + __IO uint32_t reserved1 : 2; /* [7:6] */ + __IO uint32_t ispc : 1; /* [8] */ + __IO uint32_t reserved2 : 23;/* [31:9] */ + } ctrl3_bit; + }; + + /** + * @brief qspi reserved register, offset:0x44~4C + */ + __IO uint32_t reserved2[3]; + + /** + * @brief qspi rev register, offset:0x50 + */ + union + { + __IO uint32_t rev; + struct + { + __IO uint32_t rev : 32;/* [31:0] */ + } rev_bit; + }; + + /** + * @brief qspi reserved register, offset:0x54~FC + */ + __IO uint32_t reserved3[43]; + + /** + * @brief qspi dt register, offset:0x100 + */ + union + { + __IO uint8_t dt_u8; + __IO uint16_t dt_u16; + __IO uint32_t dt; + struct + { + __IO uint32_t dt : 32;/* [31:0] */ + } dt_bit; + }; + +} qspi_type; + +/** + * @} + */ + +#define QSPI1 ((qspi_type*)QSPI1_REG_BASE) +#define QSPI2 ((qspi_type*)QSPI2_REG_BASE) + +/** @defgroup QSPI_exported_functions + * @{ + */ + +void qspi_reset(qspi_type* qspi_x); +void qspi_encryption_enable(qspi_type* qspi_x, confirm_state new_state); +void qspi_sck_mode_set(qspi_type* qspi_x, qspi_clk_mode_type new_mode); +void qspi_clk_division_set(qspi_type* qspi_x, qspi_clk_div_type new_clkdiv); +void qspi_xip_cache_bypass_set(qspi_type* qspi_x, confirm_state new_state); +void qspi_interrupt_enable(qspi_type* qspi_x, confirm_state new_state); +flag_status qspi_flag_get(qspi_type* qspi_x, uint32_t flag); +flag_status qspi_interrupt_flag_get(qspi_type* qspi_x, uint32_t flag); +void qspi_flag_clear(qspi_type* qspi_x, uint32_t flag); +void qspi_dma_rx_threshold_set(qspi_type* qspi_x, qspi_dma_fifo_thod_type new_threshold); +void qspi_dma_tx_threshold_set(qspi_type* qspi_x, qspi_dma_fifo_thod_type new_threshold); +void qspi_dma_enable(qspi_type* qspi_x, confirm_state new_state); +void qspi_busy_config(qspi_type* qspi_x, qspi_busy_pos_type busy_pos); +void qspi_xip_enable(qspi_type* qspi_x, confirm_state new_state); +void qspi_cmd_operation_kick(qspi_type* qspi_x, qspi_cmd_type* qspi_cmd_struct); +void qspi_xip_init(qspi_type* qspi_x, qspi_xip_type* xip_init_struct); +uint8_t qspi_byte_read(qspi_type* qspi_x); +uint16_t qspi_half_word_read(qspi_type* qspi_x); +uint32_t qspi_word_read(qspi_type* qspi_x); +void qspi_word_write(qspi_type* qspi_x, uint32_t value); +void qspi_half_word_write(qspi_type* qspi_x, uint16_t value); +void qspi_byte_write(qspi_type* qspi_x, uint8_t value); +void qspi_auto_ispc_enable(qspi_type* qspi_x); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_scfg.h b/armlib/at32_sys/drivers/inc/at32f435_437_scfg.h new file mode 100644 index 000000000..1e11bf36d --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_scfg.h @@ -0,0 +1,319 @@ +/** + ************************************************************************** + * @file at32f435_437_scfg.h + * @brief at32f435_437 system config header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_SCFG_H +#define __AT32F435_437_SCFG_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup SCFG + * @{ + */ + +#define SCFG_REG(value) PERIPH_REG(SCFG_BASE, value) +#define SCFG_REG_BIT(value) PERIPH_REG_BIT(value) + +/** @defgroup SCFG_exported_types + * @{ + */ + +/** + * @brief scfg xmc addres mapping swap type + */ +typedef enum +{ + SCFG_XMC_SWAP_NONE = 0x00, /* no swap */ + SCFG_XMC_SWAP_MODE1 = 0x01, /* sdram 0x60000000 and 0x70000000, nor psram sram nand2 0xC00000000 and 0xD0000000 */ + SCFG_XMC_SWAP_MODE2 = 0x02, /* qspi2 0x80000000, nand3 0xB0000000 */ + SCFG_XMC_SWAP_MODE3 = 0x03 /* sdram 0x60000000 and 0x70000000, nor psram sram nand2 0xC00000000 and 0xD0000000, qspi2 0x80000000, nand3 0xB0000000 */ +} scfg_xmc_swap_type; + +/** + * @brief scfg infrared modulation signal source selecting type + */ +typedef enum +{ + SCFG_IR_SOURCE_TMR10 = 0x00 /* infrared signal source select tmr10 */ +} scfg_ir_source_type; + +/** + * @brief scfg infrared output polarity selecting type + */ +typedef enum +{ + SCFG_IR_POLARITY_NO_AFFECTE = 0x00, /* infrared output polarity no affecte */ + SCFG_IR_POLARITY_REVERSE = 0x01 /* infrared output polarity reverse */ +} scfg_ir_polarity_type; + +/** + * @brief scfg memory address mapping selecting type + */ +typedef enum +{ + SCFG_MEM_MAP_MAIN_MEMORY = 0x00, /* 0x00000000 address mapping from main memory */ + SCFG_MEM_MAP_BOOT_MEMORY = 0x01, /* 0x00000000 address mapping from boot memory */ + SCFG_MEM_MAP_XMC_BANK1 = 0x02, /* 0x00000000 address mapping from xmc bank1 */ + SCFG_MEM_MAP_INTERNAL_SRAM = 0x03, /* 0x00000000 address mapping from internal sram */ + SCFG_MEM_MAP_XMC_SDRAM_BANK1 = 0x04 /* 0x00000000 address mapping from xmc sdram bank1 */ +} scfg_mem_map_type; + +/** + * @brief scfg pin source type + */ +typedef enum +{ + SCFG_PINS_SOURCE0 = 0x00, + SCFG_PINS_SOURCE1 = 0x01, + SCFG_PINS_SOURCE2 = 0x02, + SCFG_PINS_SOURCE3 = 0x03, + SCFG_PINS_SOURCE4 = 0x04, + SCFG_PINS_SOURCE5 = 0x05, + SCFG_PINS_SOURCE6 = 0x06, + SCFG_PINS_SOURCE7 = 0x07, + SCFG_PINS_SOURCE8 = 0x08, + SCFG_PINS_SOURCE9 = 0x09, + SCFG_PINS_SOURCE10 = 0x0A, + SCFG_PINS_SOURCE11 = 0x0B, + SCFG_PINS_SOURCE12 = 0x0C, + SCFG_PINS_SOURCE13 = 0x0D, + SCFG_PINS_SOURCE14 = 0x0E, + SCFG_PINS_SOURCE15 = 0x0F +} scfg_pins_source_type; + +/** + * @brief gpio port source type + */ +typedef enum +{ + SCFG_PORT_SOURCE_GPIOA = 0x00, + SCFG_PORT_SOURCE_GPIOB = 0x01, + SCFG_PORT_SOURCE_GPIOC = 0x02, + SCFG_PORT_SOURCE_GPIOD = 0x03, + SCFG_PORT_SOURCE_GPIOE = 0x04, + SCFG_PORT_SOURCE_GPIOF = 0x05, + SCFG_PORT_SOURCE_GPIOG = 0x06, + SCFG_PORT_SOURCE_GPIOH = 0x07 +} scfg_port_source_type; + +/** + * @brief scfg emac interface selecting type + */ +typedef enum +{ + SCFG_EMAC_SELECT_MII = 0x00, /* emac interface select mii mode */ + SCFG_EMAC_SELECT_RMII = 0x01 /* emac interface select rmii mode */ +} scfg_emac_interface_type; + +/** + * @brief scfg ultra high sourcing/sinking strength pins type + */ +typedef enum +{ + SCFG_ULTRA_DRIVEN_PB3 = MAKE_VALUE(0x2C, 0), + SCFG_ULTRA_DRIVEN_PB9 = MAKE_VALUE(0x2C, 1), + SCFG_ULTRA_DRIVEN_PB10 = MAKE_VALUE(0x2C, 2), + SCFG_ULTRA_DRIVEN_PD12 = MAKE_VALUE(0x2C, 5), + SCFG_ULTRA_DRIVEN_PD13 = MAKE_VALUE(0x2C, 6), + SCFG_ULTRA_DRIVEN_PD14 = MAKE_VALUE(0x2C, 7), + SCFG_ULTRA_DRIVEN_PD15 = MAKE_VALUE(0x2C, 8), + SCFG_ULTRA_DRIVEN_PF14 = MAKE_VALUE(0x2C, 9), + SCFG_ULTRA_DRIVEN_PF15 = MAKE_VALUE(0x2C, 10) +} scfg_ultra_driven_pins_type; + +/** + * @brief type define system config register all + */ +typedef struct +{ + /** + * @brief scfg cfg1 register, offset:0x00 + */ + union + { + __IO uint32_t cfg1; + struct + { + __IO uint32_t mem_map_sel : 3; /* [2:0] */ + __IO uint32_t reserved1 : 2; /* [4:3] */ + __IO uint32_t ir_pol : 1; /* [5] */ + __IO uint32_t ir_src_sel : 2; /* [7:6] */ + __IO uint32_t reserved2 : 2; /* [9:8] */ + __IO uint32_t swap_xmc : 2; /* [11:10] */ + __IO uint32_t reserved3 : 20;/* [31:12] */ + } cfg1_bit; + }; + + /** + * @brief scfg cfg2 register, offset:0x04 + */ + union + { + __IO uint32_t cfg2; + struct + { + __IO uint32_t reserved1 : 23;/* [22:0] */ + __IO uint32_t mii_rmii_sel : 1; /* [23] */ + __IO uint32_t reserved2 : 8; /* [31:24] */ + } cfg2_bit; + }; + + /** + * @brief scfg exintc1 register, offset:0x08 + */ + union + { + __IO uint32_t exintc1; + struct + { + __IO uint32_t exint0 : 4; /* [3:0] */ + __IO uint32_t exint1 : 4; /* [7:4] */ + __IO uint32_t exint2 : 4; /* [11:8] */ + __IO uint32_t exint3 : 4; /* [15:12] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } exintc1_bit; + }; + + /** + * @brief scfg exintc2 register, offset:0x0C + */ + union + { + __IO uint32_t exintc2; + struct + { + __IO uint32_t exint4 : 4; /* [3:0] */ + __IO uint32_t exint5 : 4; /* [7:4] */ + __IO uint32_t exint6 : 4; /* [11:8] */ + __IO uint32_t exint7 : 4; /* [15:12] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } exintc2_bit; + }; + + /** + * @brief scfg exintc3 register, offset:0x10 + */ + union + { + __IO uint32_t exintc3; + struct + { + __IO uint32_t exint8 : 4; /* [3:0] */ + __IO uint32_t exint9 : 4; /* [7:4] */ + __IO uint32_t exint10 : 4; /* [11:8] */ + __IO uint32_t exint11 : 4; /* [15:12] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } exintc3_bit; + }; + + /** + * @brief scfg exintc4 register, offset:0x14 + */ + union + { + __IO uint32_t exintc4; + struct + { + __IO uint32_t exint12 : 4; /* [3:0] */ + __IO uint32_t exint13 : 4; /* [7:4] */ + __IO uint32_t exint14 : 4; /* [11:8] */ + __IO uint32_t exint15 : 4; /* [15:12] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } exintc4_bit; + }; + + /** + * @brief crm reserved1 register, offset:0x18~0x28 + */ + __IO uint32_t reserved1[5]; + + /** + * @brief scfg uhdrv register, offset:0x2C + */ + union + { + __IO uint32_t uhdrv; + struct + { + __IO uint32_t pb3_uh : 1; /* [0] */ + __IO uint32_t pb9_uh : 1; /* [1] */ + __IO uint32_t pb10_uh : 1; /* [2] */ + __IO uint32_t reserved1 : 2; /* [4:3] */ + __IO uint32_t pd12_uh : 1; /* [5] */ + __IO uint32_t pd13_uh : 1; /* [6] */ + __IO uint32_t pd14_uh : 1; /* [7] */ + __IO uint32_t pd15_uh : 1; /* [8] */ + __IO uint32_t pf14_uh : 1; /* [9] */ + __IO uint32_t pf15_uh : 1; /* [10] */ + __IO uint32_t reserved2 : 21;/* [31:11] */ + } uhdrv_bit; + }; + +} scfg_type; + +/** + * @} + */ + +#define SCFG ((scfg_type *) SCFG_BASE) + +/** @defgroup SCFG_exported_functions + * @{ + */ + +void scfg_reset(void); +void scfg_xmc_mapping_swap_set(scfg_xmc_swap_type xmc_swap); +void scfg_infrared_config(scfg_ir_source_type source, scfg_ir_polarity_type polarity); +void scfg_mem_map_set(scfg_mem_map_type mem_map); +void scfg_emac_interface_set(scfg_emac_interface_type mode); +void scfg_exint_line_config(scfg_port_source_type port_source, scfg_pins_source_type pin_source); +void scfg_pins_ultra_driven_enable(scfg_ultra_driven_pins_type value, confirm_state new_state); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_sdio.h b/armlib/at32_sys/drivers/inc/at32f435_437_sdio.h new file mode 100644 index 000000000..c78803e77 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_sdio.h @@ -0,0 +1,623 @@ +/** + ************************************************************************** + * @file at32f435_437_sdio.h + * @brief at32f435_437 sdio header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_SDIO_H +#define __AT32F435_437_SDIO_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup SDIO + * @{ + */ + +/** @defgroup SDIO_interrupts_definition + * @brief sdio interrupt + * @{ + */ + +#define SDIO_CMDFAIL_INT ((uint32_t)0x00000001) /*!< command response received check failed interrupt */ +#define SDIO_DTFAIL_INT ((uint32_t)0x00000002) /*!< data block sent/received check failed interrupt */ +#define SDIO_CMDTIMEOUT_INT ((uint32_t)0x00000004) /*!< command response timerout interrupt */ +#define SDIO_DTTIMEOUT_INT ((uint32_t)0x00000008) /*!< data timeout interrupt */ +#define SDIO_TXERRU_INT ((uint32_t)0x00000010) /*!< transmit underrun error interrupt */ +#define SDIO_RXERRO_INT ((uint32_t)0x00000020) /*!< received overrun error interrupt */ +#define SDIO_CMDRSPCMPL_INT ((uint32_t)0x00000040) /*!< command response received interrupt */ +#define SDIO_CMDCMPL_INT ((uint32_t)0x00000080) /*!< command sent interrupt */ +#define SDIO_DTCMP_INT ((uint32_t)0x00000100) /*!< data sent interrupt */ +#define SDIO_SBITERR_INT ((uint32_t)0x00000200) /*!< start bit not detected on data bus interrupt */ +#define SDIO_DTBLKCMPL_INT ((uint32_t)0x00000400) /*!< data block sent/received interrupt */ +#define SDIO_DOCMD_INT ((uint32_t)0x00000800) /*!< command transfer in progress interrupt */ +#define SDIO_DOTX_INT ((uint32_t)0x00001000) /*!< data transmit in progress interrupt */ +#define SDIO_DORX_INT ((uint32_t)0x00002000) /*!< data receive in progress interrupt */ +#define SDIO_TXBUFH_INT ((uint32_t)0x00004000) /*!< transmit buf half empty interrupt */ +#define SDIO_RXBUFH_INT ((uint32_t)0x00008000) /*!< receive buf half full interrupt */ +#define SDIO_TXBUFF_INT ((uint32_t)0x00010000) /*!< transmit buf full interrupt */ +#define SDIO_RXBUFF_INT ((uint32_t)0x00020000) /*!< receive buf full interrupt */ +#define SDIO_TXBUFE_INT ((uint32_t)0x00040000) /*!< transmit buf empty interrupt */ +#define SDIO_RXBUFE_INT ((uint32_t)0x00080000) /*!< receive buf empty interrupt */ +#define SDIO_TXBUF_INT ((uint32_t)0x00100000) /*!< data available in transmit interrupt */ +#define SDIO_RXBUF_INT ((uint32_t)0x00200000) /*!< data available in receive interrupt */ +#define SDIO_SDIOIF_INT ((uint32_t)0x00400000) /*!< sdio interface received interrupt */ + +/** + * @} + */ + +/** @defgroup SDIO_flags_definition + * @brief sdio flag + * @{ + */ + +#define SDIO_CMDFAIL_FLAG ((uint32_t)0x00000001) /*!< command response received check failed flag */ +#define SDIO_DTFAIL_FLAG ((uint32_t)0x00000002) /*!< data block sent/received check failed flag */ +#define SDIO_CMDTIMEOUT_FLAG ((uint32_t)0x00000004) /*!< command response timerout flag */ +#define SDIO_DTTIMEOUT_FLAG ((uint32_t)0x00000008) /*!< data timeout flag */ +#define SDIO_TXERRU_FLAG ((uint32_t)0x00000010) /*!< transmit underrun error flag */ +#define SDIO_RXERRO_FLAG ((uint32_t)0x00000020) /*!< received overrun error flag */ +#define SDIO_CMDRSPCMPL_FLAG ((uint32_t)0x00000040) /*!< command response received flag */ +#define SDIO_CMDCMPL_FLAG ((uint32_t)0x00000080) /*!< command sent flag */ +#define SDIO_DTCMPL_FLAG ((uint32_t)0x00000100) /*!< data sent flag */ +#define SDIO_SBITERR_FLAG ((uint32_t)0x00000200) /*!< start bit not detected on data bus flag */ +#define SDIO_DTBLKCMPL_FLAG ((uint32_t)0x00000400) /*!< data block sent/received flag */ +#define SDIO_DOCMD_FLAG ((uint32_t)0x00000800) /*!< command transfer in progress flag */ +#define SDIO_DOTX_FLAG ((uint32_t)0x00001000) /*!< data transmit in progress flag */ +#define SDIO_DORX_FLAG ((uint32_t)0x00002000) /*!< data receive in progress flag */ +#define SDIO_TXBUFH_FLAG ((uint32_t)0x00004000) /*!< transmit buf half empty flag */ +#define SDIO_RXBUFH_FLAG ((uint32_t)0x00008000) /*!< receive buf half full flag */ +#define SDIO_TXBUFF_FLAG ((uint32_t)0x00010000) /*!< transmit buf full flag */ +#define SDIO_RXBUFF_FLAG ((uint32_t)0x00020000) /*!< receive buf full flag */ +#define SDIO_TXBUFE_FLAG ((uint32_t)0x00040000) /*!< transmit buf empty flag */ +#define SDIO_RXBUFE_FLAG ((uint32_t)0x00080000) /*!< receive buf empty flag */ +#define SDIO_TXBUF_FLAG ((uint32_t)0x00100000) /*!< data available in transmit flag */ +#define SDIO_RXBUF_FLAG ((uint32_t)0x00200000) /*!< data available in receive flag */ +#define SDIO_SDIOIF_FLAG ((uint32_t)0x00400000) /*!< sdio interface received flag */ + +/** + * @} + */ + +/** @defgroup SDIO_exported_types + * @{ + */ + +/** + * @brief sdio power state + */ +typedef enum +{ + SDIO_POWER_OFF = 0x00, /*!< power-off, clock to card is stopped */ + SDIO_POWER_ON = 0x03 /*!< power-on, the card is clocked */ +} sdio_power_state_type; + +/** + * @brief sdio edge phase + */ +typedef enum +{ + SDIO_CLOCK_EDGE_RISING = 0x00, /*!< sdio bus clock generated on the rising edge of the master clock */ + SDIO_CLOCK_EDGE_FALLING = 0x01 /*!< sdio bus clock generated on the falling edge of the master clock */ +} sdio_edge_phase_type; + +/** + * @brief sdio bus width + */ +typedef enum +{ + SDIO_BUS_WIDTH_D1 = 0x00, /*!< sdio wide bus select 1-bit */ + SDIO_BUS_WIDTH_D4 = 0x01, /*!< sdio wide bus select 4-bit */ + SDIO_BUS_WIDTH_D8 = 0x02 /*!< sdio wide bus select 8-bit */ +} sdio_bus_width_type; + +/** + * @brief sdio response type + */ +typedef enum +{ + SDIO_RESPONSE_NO = 0x00, /*!< no response */ + SDIO_RESPONSE_SHORT = 0x01, /*!< short response */ + SDIO_RESPONSE_LONG = 0x03 /*!< long response */ +} sdio_reponse_type; + +/** + * @brief sdio wait type + */ +typedef enum +{ + SDIO_WAIT_FOR_NO = 0x00, /*!< no wait */ + SDIO_WAIT_FOR_INT = 0x01, /*!< wait interrupt request */ + SDIO_WAIT_FOR_PEND = 0x02 /*!< wait end of transfer */ +} sdio_wait_type; + +/** + * @brief sdio response register index + */ +typedef enum +{ + SDIO_RSP1_INDEX = 0x00, /*!< response index 1, corresponding to sdio_rsp register 1 */ + SDIO_RSP2_INDEX = 0x01, /*!< response index 2, corresponding to sdio_rsp register 2 */ + SDIO_RSP3_INDEX = 0x02, /*!< response index 3, corresponding to sdio_rsp register 3 */ + SDIO_RSP4_INDEX = 0x03 /*!< response index 4, corresponding to sdio_rsp register 4 */ +} sdio_rsp_index_type; + +/** + * @brief sdio data block size + */ +typedef enum +{ + SDIO_DATA_BLOCK_SIZE_1B = 0x00, /*!< data block size 1 byte */ + SDIO_DATA_BLOCK_SIZE_2B = 0x01, /*!< data block size 2 bytes */ + SDIO_DATA_BLOCK_SIZE_4B = 0x02, /*!< data block size 4 bytes */ + SDIO_DATA_BLOCK_SIZE_8B = 0x03, /*!< data block size 8 bytes */ + SDIO_DATA_BLOCK_SIZE_16B = 0x04, /*!< data block size 16 bytes */ + SDIO_DATA_BLOCK_SIZE_32B = 0x05, /*!< data block size 32 bytes */ + SDIO_DATA_BLOCK_SIZE_64B = 0x06, /*!< data block size 64 bytes */ + SDIO_DATA_BLOCK_SIZE_128B = 0x07, /*!< data block size 128 bytes */ + SDIO_DATA_BLOCK_SIZE_256B = 0x08, /*!< data block size 256 bytes */ + SDIO_DATA_BLOCK_SIZE_512B = 0x09, /*!< data block size 512 bytes */ + SDIO_DATA_BLOCK_SIZE_1024B = 0x0A, /*!< data block size 1024 bytes */ + SDIO_DATA_BLOCK_SIZE_2048B = 0x0B, /*!< data block size 2048 bytes */ + SDIO_DATA_BLOCK_SIZE_4096B = 0x0C, /*!< data block size 4096 bytes */ + SDIO_DATA_BLOCK_SIZE_8192B = 0x0D, /*!< data block size 8192 bytes */ + SDIO_DATA_BLOCK_SIZE_16384B = 0x0E /*!< data block size 16384 bytes */ +} sdio_block_size_type; + +/** + * @brief sdio data transfer mode + */ +typedef enum +{ + SDIO_DATA_BLOCK_TRANSFER = 0x00, /*!< the sdio block transfer mode */ + SDIO_DATA_STREAM_TRANSFER = 0x01 /*!< the sdio stream transfer mode */ +} sdio_transfer_mode_type; + +/** + * @brief sdio data transfer direction + */ +typedef enum +{ + SDIO_DATA_TRANSFER_TO_CARD = 0x00, /*!< the sdio controller write */ + SDIO_DATA_TRANSFER_TO_CONTROLLER = 0x01 /*!< the sdio controller read */ +} sdio_transfer_direction_type; + +/** + * @brief sdio read wait mode + */ +typedef enum +{ + SDIO_READ_WAIT_CONTROLLED_BY_D2 = 0x00, /*!< the sdio read wait on data2 line */ + SDIO_READ_WAIT_CONTROLLED_BY_CK = 0x01 /*!< the sdio read wait on clock line */ +} sdio_read_wait_mode_type; + +/** + * @brief sdio command structure + */ +typedef struct +{ + uint32_t argument; /*!< the sdio command argument is sent to a card as part of command message */ + uint8_t cmd_index; /*!< the sdio command index */ + sdio_reponse_type rsp_type; /*!< the sdio response type */ + sdio_wait_type wait_type; /*!< the sdio wait for interrupt request is enabled or disable */ +} sdio_command_struct_type; + +/** + * @brief sdio data structure + */ +typedef struct +{ + uint32_t timeout; /*!< the sdio data timeout period in car bus clock periods */ + uint32_t data_length; /*!< the sdio data length */ + sdio_block_size_type block_size; /*!< the sdio data block size of block transfer mode */ + sdio_transfer_mode_type transfer_mode; /*!< the sdio transfer mode, block or stream */ + sdio_transfer_direction_type transfer_direction; /*!< the sdio data transfer direction */ +} sdio_data_struct_type; + +/** + * @brief type define sdio register all + */ +typedef struct +{ + /** + * @brief sdio pwrctrl register, offset:0x00 + */ + union + { + __IO uint32_t pwrctrl; + struct + { + __IO uint32_t ps : 2; /* [1:0] */ + __IO uint32_t reserved1 : 30;/* [31:2] */ + } pwrctrl_bit; + }; + + /** + * @brief sdio clkctrl register, offset:0x04 + */ + union + { + __IO uint32_t clkctrl; + struct + { + __IO uint32_t clkdiv_l : 8; /* [7:0] */ + __IO uint32_t clkoen : 1; /* [8] */ + __IO uint32_t pwrsven : 1; /* [9] */ + __IO uint32_t bypsen : 1; /* [10] */ + __IO uint32_t busws : 2; /* [12:11] */ + __IO uint32_t clkegs : 1; /* [13] */ + __IO uint32_t hfcen : 1; /* [14] */ + __IO uint32_t clkdiv_h : 2; /* [16:15] */ + __IO uint32_t reserved1 : 15;/* [31:17] */ + } clkctrl_bit; + }; + + /** + * @brief sdio argu register, offset:0x08 + */ + union + { + __IO uint32_t argu; + struct + { + __IO uint32_t argu : 32;/* [31:0] */ + } argu_bit; + }; + + /** + * @brief sdio cmdctrl register, offset:0x0C + */ + union + { + __IO uint32_t cmdctrl; + struct + { + __IO uint32_t cmdidx : 6; /* [5:0] */ + __IO uint32_t rspwt : 2; /* [7:6] */ + __IO uint32_t intwt : 1; /* [8] */ + __IO uint32_t pndwt : 1; /* [9] */ + __IO uint32_t ccsmen : 1; /* [10] */ + __IO uint32_t iosusp : 1; /* [11] */ + __IO uint32_t reserved1 : 20;/* [31:12] */ + } cmdctrl_bit; + }; + + /** + * @brief sdio rspcmd register, offset:0x10 + */ + union + { + __IO uint32_t rspcmd; + struct + { + __IO uint32_t rspcmd : 6; /* [5:0] */ + __IO uint32_t reserved1 : 26;/* [31:6] */ + } rspcmd_bit; + }; + + /** + * @brief sdio rsp1 register, offset:0x14 + */ + union + { + __IO uint32_t rsp1; + struct + { + __IO uint32_t cardsts1 : 32;/* [31:0] */ + } rsp1_bit; + }; + + /** + * @brief sdio rsp2 register, offset:0x18 + */ + union + { + __IO uint32_t rsp2; + struct + { + __IO uint32_t cardsts2 : 32;/* [31:0] */ + } rsp2_bit; + }; + + /** + * @brief sdio rsp3 register, offset:0x1C + */ + union + { + __IO uint32_t rsp3; + struct + { + __IO uint32_t cardsts3 : 32;/* [31:0] */ + } rsp3_bit; + }; + + /** + * @brief sdio rsp4 register, offset:0x20 + */ + union + { + __IO uint32_t rsp4; + struct + { + __IO uint32_t cardsts4 : 32;/* [31:0] */ + } rsp4_bit; + }; + + /** + * @brief sdio dttmr register, offset:0x24 + */ + union + { + __IO uint32_t dttmr; + struct + { + __IO uint32_t timeout : 32;/* [31:0] */ + } dttmr_bit; + }; + + /** + * @brief sdio dtlen register, offset:0x28 + */ + union + { + __IO uint32_t dtlen; + struct + { + __IO uint32_t dtlen : 25;/* [24:0] */ + __IO uint32_t reserved1 : 7; /* [31:25] */ + } dtlen_bit; + }; + + /** + * @brief sdio dtctrl register, offset:0x2C + */ + union + { + __IO uint32_t dtctrl; + struct + { + __IO uint32_t tfren : 1; /* [0] */ + __IO uint32_t tfrdir : 1; /* [1] */ + __IO uint32_t tfrmode : 1; /* [2] */ + __IO uint32_t dmaen : 1; /* [3] */ + __IO uint32_t blksize : 4; /* [7:4] */ + __IO uint32_t rdwtstart : 1; /* [8] */ + __IO uint32_t rdwtstop : 1; /* [9] */ + __IO uint32_t rdwtmode : 1; /* [10] */ + __IO uint32_t ioen : 1; /* [11] */ + __IO uint32_t reserved1 : 20;/* [31:12] */ + } dtctrl_bit; + }; + + /** + * @brief sdio dtcnt register, offset:0x30 + */ + union + { + __IO uint32_t dtcnt; + struct + { + __IO uint32_t cnt : 25;/* [24:0] */ + __IO uint32_t reserved1 : 7; /* [31:25] */ + } dtcnt_bit; + }; + + /** + * @brief sdio sts register, offset:0x34 + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t cmdfail : 1; /* [0] */ + __IO uint32_t dtfail : 1; /* [1] */ + __IO uint32_t cmdtimeout : 1; /* [2] */ + __IO uint32_t dttimeout : 1; /* [3] */ + __IO uint32_t txerru : 1; /* [4] */ + __IO uint32_t rxerro : 1; /* [5] */ + __IO uint32_t cmdrspcmpl : 1; /* [6] */ + __IO uint32_t cmdcmpl : 1; /* [7] */ + __IO uint32_t dtcmpl : 1; /* [8] */ + __IO uint32_t sbiterr : 1; /* [9] */ + __IO uint32_t dtblkcmpl : 1; /* [10] */ + __IO uint32_t docmd : 1; /* [11] */ + __IO uint32_t dotx : 1; /* [12] */ + __IO uint32_t dorx : 1; /* [13] */ + __IO uint32_t txbufh : 1; /* [14] */ + __IO uint32_t rxbufh : 1; /* [15] */ + __IO uint32_t txbuff : 1; /* [16] */ + __IO uint32_t rxbuff : 1; /* [17] */ + __IO uint32_t txbufe : 1; /* [18] */ + __IO uint32_t rxbufe : 1; /* [19] */ + __IO uint32_t txbuf : 1; /* [20] */ + __IO uint32_t rxbuf : 1; /* [21] */ + __IO uint32_t ioif : 1; /* [22] */ + __IO uint32_t reserved1 : 9; /* [31:23] */ + } sts_bit; + }; + + /** + * @brief sdio intclr register, offset:0x38 + */ + union + { + __IO uint32_t intclr; + struct + { + __IO uint32_t cmdfail : 1; /* [0] */ + __IO uint32_t dtfail : 1; /* [1] */ + __IO uint32_t cmdtimeout : 1; /* [2] */ + __IO uint32_t dttimeout : 1; /* [3] */ + __IO uint32_t txerru : 1; /* [4] */ + __IO uint32_t rxerro : 1; /* [5] */ + __IO uint32_t cmdrspcmpl : 1; /* [6] */ + __IO uint32_t cmdcmpl : 1; /* [7] */ + __IO uint32_t dtcmpl : 1; /* [8] */ + __IO uint32_t sbiterr : 1; /* [9] */ + __IO uint32_t dtblkcmpl : 1; /* [10] */ + __IO uint32_t reserved1 : 11;/* [21:11] */ + __IO uint32_t ioif : 1; /* [22] */ + __IO uint32_t reserved2 : 9; /* [31:23] */ + } intclr_bit; + }; + + /** + * @brief sdio inten register, offset:0x3C + */ + union + { + __IO uint32_t inten; + struct + { + __IO uint32_t cmdfailien : 1; /* [0] */ + __IO uint32_t dtfailien : 1; /* [1] */ + __IO uint32_t cmdtimeoutien : 1; /* [2] */ + __IO uint32_t dttimeoutien : 1; /* [3] */ + __IO uint32_t txerruien : 1; /* [4] */ + __IO uint32_t rxerroien : 1; /* [5] */ + __IO uint32_t cmdrspcmplien : 1; /* [6] */ + __IO uint32_t cmdcmplien : 1; /* [7] */ + __IO uint32_t dtcmplien : 1; /* [8] */ + __IO uint32_t sbiterrien : 1; /* [9] */ + __IO uint32_t dtblkcmplien : 1; /* [10] */ + __IO uint32_t docmdien : 1; /* [11] */ + __IO uint32_t dotxien : 1; /* [12] */ + __IO uint32_t dorxien : 1; /* [13] */ + __IO uint32_t txbufhien : 1; /* [14] */ + __IO uint32_t rxbufhien : 1; /* [15] */ + __IO uint32_t txbuffien : 1; /* [16] */ + __IO uint32_t rxbuffien : 1; /* [17] */ + __IO uint32_t txbufeien : 1; /* [18] */ + __IO uint32_t rxbufeien : 1; /* [19] */ + __IO uint32_t txbufien : 1; /* [20] */ + __IO uint32_t rxbufien : 1; /* [21] */ + __IO uint32_t ioifien : 1; /* [22] */ + __IO uint32_t reserved1 : 9; /* [31:23] */ + } inten_bit; + }; + + /** + * @brief sdio reserved1 register, offset:0x40~0x44 + */ + __IO uint32_t reserved1[2]; + + /** + * @brief sdio bufcnt register, offset:0x48 + */ + union + { + __IO uint32_t bufcnt; + struct + { + __IO uint32_t cnt : 24;/* [23:0] */ + __IO uint32_t reserved1 : 8; /* [31:24] */ + } bufcnt_bit; + }; + + /** + * @brief sdio reserved2 register, offset:0x4C~0x7C + */ + __IO uint32_t reserved2[13]; + + /** + * @brief sdio buf register, offset:0x80 + */ + union + { + __IO uint32_t buf; + struct + { + __IO uint32_t dt : 32;/* [31:0] */ + } buf_bit; + }; + +} sdio_type; + +/** + * @} + */ + +#define SDIO1 ((sdio_type *) SDIO1_BASE) +#define SDIO2 ((sdio_type *) SDIO2_BASE) + +/** @defgroup SDIO_exported_functions + * @{ + */ + +void sdio_reset(sdio_type *sdio_x); +void sdio_power_set(sdio_type *sdio_x, sdio_power_state_type power_state); +sdio_power_state_type sdio_power_status_get(sdio_type *sdio_x); +void sdio_clock_config(sdio_type *sdio_x, uint16_t clk_div, sdio_edge_phase_type clk_edg); +void sdio_bus_width_config(sdio_type *sdio_x, sdio_bus_width_type width); +void sdio_clock_bypass(sdio_type *sdio_x, confirm_state new_state); +void sdio_power_saving_mode_enable(sdio_type *sdio_x, confirm_state new_state); +void sdio_flow_control_enable(sdio_type *sdio_x, confirm_state new_state); +void sdio_clock_enable(sdio_type *sdio_x, confirm_state new_state); +void sdio_dma_enable(sdio_type *sdio_x, confirm_state new_state); +void sdio_interrupt_enable(sdio_type *sdio_x, uint32_t int_opt, confirm_state new_state); +flag_status sdio_flag_get(sdio_type *sdio_x, uint32_t flag); +flag_status sdio_interrupt_flag_get(sdio_type *sdio_x, uint32_t flag); +void sdio_flag_clear(sdio_type *sdio_x, uint32_t flag); +void sdio_command_config(sdio_type *sdio_x, sdio_command_struct_type *command_struct); +void sdio_command_state_machine_enable(sdio_type *sdio_x, confirm_state new_state); +uint8_t sdio_command_response_get(sdio_type *sdio_x); +uint32_t sdio_response_get(sdio_type *sdio_x, sdio_rsp_index_type reg_index); +void sdio_data_config(sdio_type *sdio_x, sdio_data_struct_type *data_struct); +void sdio_data_state_machine_enable(sdio_type *sdio_x, confirm_state new_state); +uint32_t sdio_data_counter_get(sdio_type *sdio_x); +uint32_t sdio_data_read(sdio_type *sdio_x); +uint32_t sdio_buffer_counter_get(sdio_type *sdio_x); +void sdio_data_write(sdio_type *sdio_x, uint32_t data); +void sdio_read_wait_mode_set(sdio_type *sdio_x, sdio_read_wait_mode_type mode); +void sdio_read_wait_start(sdio_type *sdio_x, confirm_state new_state); +void sdio_read_wait_stop(sdio_type *sdio_x, confirm_state new_state); +void sdio_io_function_enable(sdio_type *sdio_x, confirm_state new_state); +void sdio_io_suspend_command_set(sdio_type *sdio_x, confirm_state new_state); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_spi.h b/armlib/at32_sys/drivers/inc/at32f435_437_spi.h new file mode 100644 index 000000000..ae99b541b --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_spi.h @@ -0,0 +1,504 @@ +/** + ************************************************************************** + * @file at32f435_437_spi.h + * @brief at32f435_437 spi header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_SPI_H +#define __AT32F435_437_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/** + * @defgroup SPI_I2S_flags_definition + * @brief spi i2s flag + * @{ + */ + +#define SPI_I2S_RDBF_FLAG 0x0001 /*!< spi or i2s receive data buffer full flag */ +#define SPI_I2S_TDBE_FLAG 0x0002 /*!< spi or i2s transmit data buffer empty flag */ +#define I2S_ACS_FLAG 0x0004 /*!< i2s audio channel state flag */ +#define I2S_TUERR_FLAG 0x0008 /*!< i2s transmitter underload error flag */ +#define SPI_CCERR_FLAG 0x0010 /*!< spi crc calculation error flag */ +#define SPI_MMERR_FLAG 0x0020 /*!< spi master mode error flag */ +#define SPI_I2S_ROERR_FLAG 0x0040 /*!< spi or i2s receiver overflow error flag */ +#define SPI_I2S_BF_FLAG 0x0080 /*!< spi or i2s busy flag */ +#define SPI_CSPAS_FLAG 0x0100 /*!< spi cs pulse abnormal setting fiag */ + +/** + * @} + */ + +/** + * @defgroup SPI_I2S_interrupts_definition + * @brief spi i2s interrupt + * @{ + */ + +#define SPI_I2S_ERROR_INT 0x0020 /*!< error interrupt */ +#define SPI_I2S_RDBF_INT 0x0040 /*!< receive data buffer full interrupt */ +#define SPI_I2S_TDBE_INT 0x0080 /*!< transmit data buffer empty interrupt */ + +/** + * @} + */ + +/** @defgroup SPI_exported_types + * @{ + */ + +/** + * @brief spi frame bit num type + */ +typedef enum +{ + SPI_FRAME_8BIT = 0x00, /*!< 8-bit data frame format */ + SPI_FRAME_16BIT = 0x01 /*!< 16-bit data frame format */ +} spi_frame_bit_num_type; + +/** + * @brief spi master/slave mode type + */ +typedef enum +{ + SPI_MODE_SLAVE = 0x00, /*!< select as slave mode */ + SPI_MODE_MASTER = 0x01 /*!< select as master mode */ +} spi_master_slave_mode_type; + +/** + * @brief spi clock polarity (clkpol) type + */ +typedef enum +{ + SPI_CLOCK_POLARITY_LOW = 0x00, /*!< sck keeps low at idle state */ + SPI_CLOCK_POLARITY_HIGH = 0x01 /*!< sck keeps high at idle state */ +} spi_clock_polarity_type; + +/** + * @brief spi clock phase (clkpha) type + */ +typedef enum +{ + SPI_CLOCK_PHASE_1EDGE = 0x00, /*!< data capture start from the first clock edge */ + SPI_CLOCK_PHASE_2EDGE = 0x01 /*!< data capture start from the second clock edge */ +} spi_clock_phase_type; + +/** + * @brief spi cs mode type + */ +typedef enum +{ + SPI_CS_HARDWARE_MODE = 0x00, /*!< cs is hardware mode */ + SPI_CS_SOFTWARE_MODE = 0x01 /*!< cs is software mode */ +} spi_cs_mode_type; + +/** + * @brief spi master clock frequency division type + */ +typedef enum +{ + SPI_MCLK_DIV_2 = 0x00, /*!< master clock frequency division 2 */ + SPI_MCLK_DIV_3 = 0x0A, /*!< master clock frequency division 3 */ + SPI_MCLK_DIV_4 = 0x01, /*!< master clock frequency division 4 */ + SPI_MCLK_DIV_8 = 0x02, /*!< master clock frequency division 8 */ + SPI_MCLK_DIV_16 = 0x03, /*!< master clock frequency division 16 */ + SPI_MCLK_DIV_32 = 0x04, /*!< master clock frequency division 32 */ + SPI_MCLK_DIV_64 = 0x05, /*!< master clock frequency division 64 */ + SPI_MCLK_DIV_128 = 0x06, /*!< master clock frequency division 128 */ + SPI_MCLK_DIV_256 = 0x07, /*!< master clock frequency division 256 */ + SPI_MCLK_DIV_512 = 0x08, /*!< master clock frequency division 512 */ + SPI_MCLK_DIV_1024 = 0x09 /*!< master clock frequency division 1024 */ +} spi_mclk_freq_div_type; + +/** + * @brief spi transmit first bit (lsb/msb) type + */ +typedef enum +{ + SPI_FIRST_BIT_MSB = 0x00, /*!< the frame format is msb first */ + SPI_FIRST_BIT_LSB = 0x01 /*!< the frame format is lsb first */ +} spi_first_bit_type; + +/** + * @brief spi transmission mode type + */ +typedef enum +{ + SPI_TRANSMIT_FULL_DUPLEX = 0x00, /*!< dual line unidirectional full-duplex mode(slben = 0 and ora = 0) */ + SPI_TRANSMIT_SIMPLEX_RX = 0x01, /*!< dual line unidirectional simplex receive-only mode(slben = 0 and ora = 1) */ + SPI_TRANSMIT_HALF_DUPLEX_RX = 0x02, /*!< single line bidirectional half duplex mode-receiving(slben = 1 and slbtd = 0) */ + SPI_TRANSMIT_HALF_DUPLEX_TX = 0x03 /*!< single line bidirectional half duplex mode-transmitting(slben = 1 and slbtd = 1) */ +} spi_transmission_mode_type; + +/** + * @brief spi crc direction type + */ +typedef enum +{ + SPI_CRC_RX = 0x0014, /*!< crc direction is rx */ + SPI_CRC_TX = 0x0018 /*!< crc direction is tx */ +} spi_crc_direction_type; + +/** + * @brief spi single line bidirectional direction type + */ +typedef enum +{ + SPI_HALF_DUPLEX_DIRECTION_RX = 0x00, /*!< single line bidirectional half duplex mode direction: receive(slbtd = 0) */ + SPI_HALF_DUPLEX_DIRECTION_TX = 0x01 /*!< single line bidirectional half duplex mode direction: transmit(slbtd = 1) */ +} spi_half_duplex_direction_type; + +/** + * @brief spi software cs internal level type + */ +typedef enum +{ + SPI_SWCS_INTERNAL_LEVEL_LOW = 0x00, /*!< internal level low */ + SPI_SWCS_INTERNAL_LEVEL_HIGHT = 0x01 /*!< internal level high */ +} spi_software_cs_level_type; + +/** + * @brief i2s audio protocol type + */ +typedef enum +{ + I2S_AUDIO_PROTOCOL_PHILLIPS = 0x00, /*!< i2s philip standard */ + I2S_AUDIO_PROTOCOL_MSB = 0x01, /*!< msb-justified standard */ + I2S_AUDIO_PROTOCOL_LSB = 0x02, /*!< lsb-justified standard */ + I2S_AUDIO_PROTOCOL_PCM_SHORT = 0x03, /*!< pcm standard-short frame */ + I2S_AUDIO_PROTOCOL_PCM_LONG = 0x04 /*!< pcm standard-long frame */ +} i2s_audio_protocol_type; + +/** + * @brief i2s audio frequency type + */ +typedef enum +{ + I2S_AUDIO_FREQUENCY_DEFAULT = 2, /*!< i2s audio sampling frequency default */ + I2S_AUDIO_FREQUENCY_8K = 8000, /*!< i2s audio sampling frequency 8k */ + I2S_AUDIO_FREQUENCY_11_025K = 11025, /*!< i2s audio sampling frequency 11.025k */ + I2S_AUDIO_FREQUENCY_16K = 16000, /*!< i2s audio sampling frequency 16k */ + I2S_AUDIO_FREQUENCY_22_05K = 22050, /*!< i2s audio sampling frequency 22.05k */ + I2S_AUDIO_FREQUENCY_32K = 32000, /*!< i2s audio sampling frequency 32k */ + I2S_AUDIO_FREQUENCY_44_1K = 44100, /*!< i2s audio sampling frequency 44.1k */ + I2S_AUDIO_FREQUENCY_48K = 48000, /*!< i2s audio sampling frequency 48k */ + I2S_AUDIO_FREQUENCY_96K = 96000, /*!< i2s audio sampling frequency 96k */ + I2S_AUDIO_FREQUENCY_192K = 192000 /*!< i2s audio sampling frequency 192k */ +} i2s_audio_sampling_freq_type; + +/** + * @brief i2s data bit num and channel bit num type + */ +typedef enum +{ + I2S_DATA_16BIT_CHANNEL_16BIT = 0x01, /*!< 16-bit data packed in 16-bit channel frame */ + I2S_DATA_16BIT_CHANNEL_32BIT = 0x02, /*!< 16-bit data packed in 32-bit channel frame */ + I2S_DATA_24BIT_CHANNEL_32BIT = 0x03, /*!< 24-bit data packed in 32-bit channel frame */ + I2S_DATA_32BIT_CHANNEL_32BIT = 0x04 /*!< 32-bit data packed in 32-bit channel frame */ +} i2s_data_channel_format_type; + +/** + * @brief i2s operation mode type + */ +typedef enum +{ + I2S_MODE_SLAVE_TX = 0x00, /*!< slave transmission mode */ + I2S_MODE_SLAVE_RX = 0x01, /*!< slave reception mode */ + I2S_MODE_MASTER_TX = 0x02, /*!< master transmission mode */ + I2S_MODE_MASTER_RX = 0x03 /*!< master reception mode */ +} i2s_operation_mode_type; + +/** + * @brief i2s clock polarity type + */ +typedef enum +{ + I2S_CLOCK_POLARITY_LOW = 0x00, /*!< i2s clock steady state is low level */ + I2S_CLOCK_POLARITY_HIGH = 0x01 /*!< i2s clock steady state is high level */ +} i2s_clock_polarity_type; + +/** + * @brief spi init type + */ +typedef struct +{ + spi_transmission_mode_type transmission_mode; /*!< transmission mode selection */ + spi_master_slave_mode_type master_slave_mode; /*!< master or slave mode selection */ + spi_mclk_freq_div_type mclk_freq_division; /*!< master clock frequency division selection */ + spi_first_bit_type first_bit_transmission;/*!< transmit lsb or msb selection */ + spi_frame_bit_num_type frame_bit_num; /*!< frame bit num 8 or 16 bit selection */ + spi_clock_polarity_type clock_polarity; /*!< clock polarity selection */ + spi_clock_phase_type clock_phase; /*!< clock phase selection */ + spi_cs_mode_type cs_mode_selection; /*!< hardware or software cs mode selection */ +} spi_init_type; + +/** + * @brief i2s init type + */ +typedef struct +{ + i2s_operation_mode_type operation_mode; /*!< operation mode selection */ + i2s_audio_protocol_type audio_protocol; /*!< audio protocol selection */ + i2s_audio_sampling_freq_type audio_sampling_freq; /*!< audio frequency selection */ + i2s_data_channel_format_type data_channel_format; /*!< data bit num and channel bit num selection */ + i2s_clock_polarity_type clock_polarity; /*!< clock polarity selection */ + confirm_state mclk_output_enable; /*!< mclk_output selection */ +} i2s_init_type; + +/** + * @brief type define spi register all + */ +typedef struct +{ + + /** + * @brief spi ctrl1 register, offset:0x00 + */ + union + { + __IO uint32_t ctrl1; + struct + { + __IO uint32_t clkpha : 1; /* [0] */ + __IO uint32_t clkpol : 1; /* [1] */ + __IO uint32_t msten : 1; /* [2] */ + __IO uint32_t mdiv_l : 3; /* [5:3] */ + __IO uint32_t spien : 1; /* [6] */ + __IO uint32_t ltf : 1; /* [7] */ + __IO uint32_t swcsil : 1; /* [8] */ + __IO uint32_t swcsen : 1; /* [9] */ + __IO uint32_t ora : 1; /* [10] */ + __IO uint32_t fbn : 1; /* [11] */ + __IO uint32_t ntc : 1; /* [12] */ + __IO uint32_t ccen : 1; /* [13] */ + __IO uint32_t slbtd : 1; /* [14] */ + __IO uint32_t slben : 1; /* [15] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } ctrl1_bit; + }; + + /** + * @brief spi ctrl2 register, offset:0x04 + */ + union + { + __IO uint32_t ctrl2; + struct + { + __IO uint32_t dmaren : 1; /* [0] */ + __IO uint32_t dmaten : 1; /* [1] */ + __IO uint32_t hwcsoe : 1; /* [2] */ + __IO uint32_t reserved1 : 1; /* [3] */ + __IO uint32_t tien : 1; /* [4] */ + __IO uint32_t errie : 1; /* [5] */ + __IO uint32_t rdbfie : 1; /* [6] */ + __IO uint32_t tdbeie : 1; /* [7] */ + __IO uint32_t mdiv_h : 1; /* [8] */ + __IO uint32_t mdiv3en : 1; /* [9] */ + __IO uint32_t reserved2 : 22;/* [31:10] */ + } ctrl2_bit; + }; + + /** + * @brief spi sts register, offset:0x08 + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t rdbf : 1; /* [0] */ + __IO uint32_t tdbe : 1; /* [1] */ + __IO uint32_t acs : 1; /* [2] */ + __IO uint32_t tuerr : 1; /* [3] */ + __IO uint32_t ccerr : 1; /* [4] */ + __IO uint32_t mmerr : 1; /* [5] */ + __IO uint32_t roerr : 1; /* [6] */ + __IO uint32_t bf : 1; /* [7] */ + __IO uint32_t cspas : 1; /* [8] */ + __IO uint32_t reserved1 : 23;/* [31:9] */ + } sts_bit; + }; + + /** + * @brief spi dt register, offset:0x0C + */ + union + { + __IO uint32_t dt; + struct + { + __IO uint32_t dt : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } dt_bit; + }; + + /** + * @brief spi cpoly register, offset:0x10 + */ + union + { + __IO uint32_t cpoly; + struct + { + __IO uint32_t cpoly : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } cpoly_bit; + }; + + /** + * @brief spi rcrc register, offset:0x14 + */ + union + { + __IO uint32_t rcrc; + struct + { + __IO uint32_t rcrc : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } rcrc_bit; + }; + + /** + * @brief spi tcrc register, offset:0x18 + */ + union + { + __IO uint32_t tcrc; + struct + { + __IO uint32_t tcrc : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } tcrc_bit; + }; + + /** + * @brief spi i2sctrl register, offset:0x1C + */ + union + { + __IO uint32_t i2sctrl; + struct + { + __IO uint32_t i2scbn : 1; /* [0] */ + __IO uint32_t i2sdbn : 2; /* [2:1] */ + __IO uint32_t i2sclkpol : 1; /* [3] */ + __IO uint32_t stdsel : 2; /* [5:4] */ + __IO uint32_t reserved1 : 1; /* [6] */ + __IO uint32_t pcmfssel : 1; /* [7] */ + __IO uint32_t opersel : 2; /* [9:8] */ + __IO uint32_t i2sen : 1; /* [10] */ + __IO uint32_t i2smsel : 1; /* [11] */ + __IO uint32_t reserved2 : 20;/* [31:12] */ + } i2sctrl_bit; + }; + + /** + * @brief spi i2sclk register, offset:0x20 + */ + union + { + __IO uint32_t i2sclk; + struct + { + __IO uint32_t i2sdiv_l : 8; /* [7:0] */ + __IO uint32_t i2sodd : 1; /* [8] */ + __IO uint32_t i2smclkoe : 1; /* [9] */ + __IO uint32_t i2sdiv_h : 2; /* [11:10] */ + __IO uint32_t reserved1 : 20;/* [31:12] */ + } i2sclk_bit; + }; + +} spi_type; + +/** + * @} + */ + +#define SPI1 ((spi_type *) SPI1_BASE) +#define SPI2 ((spi_type *) SPI2_BASE) +#define SPI3 ((spi_type *) SPI3_BASE) +#define SPI4 ((spi_type *) SPI4_BASE) +#define I2S2EXT ((spi_type *) I2S2EXT_BASE) +#define I2S3EXT ((spi_type *) I2S3EXT_BASE) + +/** @defgroup SPI_exported_functions + * @{ + */ + +void spi_i2s_reset(spi_type *spi_x); +void spi_default_para_init(spi_init_type* spi_init_struct); +void spi_init(spi_type* spi_x, spi_init_type* spi_init_struct); +void spi_ti_mode_enable(spi_type* spi_x, confirm_state new_state); +void spi_crc_next_transmit(spi_type* spi_x); +void spi_crc_polynomial_set(spi_type* spi_x, uint16_t crc_poly); +uint16_t spi_crc_polynomial_get(spi_type* spi_x); +void spi_crc_enable(spi_type* spi_x, confirm_state new_state); +uint16_t spi_crc_value_get(spi_type* spi_x, spi_crc_direction_type crc_direction); +void spi_hardware_cs_output_enable(spi_type* spi_x, confirm_state new_state); +void spi_software_cs_internal_level_set(spi_type* spi_x, spi_software_cs_level_type level); +void spi_frame_bit_num_set(spi_type* spi_x, spi_frame_bit_num_type bit_num); +void spi_half_duplex_direction_set(spi_type* spi_x, spi_half_duplex_direction_type direction); +void spi_enable(spi_type* spi_x, confirm_state new_state); +void i2s_default_para_init(i2s_init_type* i2s_init_struct); +void i2s_init(spi_type* spi_x, i2s_init_type* i2s_init_struct); +void i2s_enable(spi_type* spi_x, confirm_state new_state); +void spi_i2s_interrupt_enable(spi_type* spi_x, uint32_t spi_i2s_int, confirm_state new_state); +void spi_i2s_dma_transmitter_enable(spi_type* spi_x, confirm_state new_state); +void spi_i2s_dma_receiver_enable(spi_type* spi_x, confirm_state new_state); +void spi_i2s_data_transmit(spi_type* spi_x, uint16_t tx_data); +uint16_t spi_i2s_data_receive(spi_type* spi_x); +flag_status spi_i2s_flag_get(spi_type* spi_x, uint32_t spi_i2s_flag); +flag_status spi_i2s_interrupt_flag_get(spi_type* spi_x, uint32_t spi_i2s_flag); +void spi_i2s_flag_clear(spi_type* spi_x, uint32_t spi_i2s_flag); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_tmr.h b/armlib/at32_sys/drivers/inc/at32f435_437_tmr.h new file mode 100644 index 000000000..488dba8d5 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_tmr.h @@ -0,0 +1,1005 @@ +/** + ************************************************************************** + * @file at32f435_437_tmr.h + * @brief at32f435_437 tmr header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_TMR_H +#define __AT32F435_437_TMR_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup TMR + * @{ + */ + +/** @defgroup TMR_flags_definition + * @brief tmr flag + * @{ + */ + +#define TMR_OVF_FLAG ((uint32_t)0x000001) /*!< tmr flag overflow */ +#define TMR_C1_FLAG ((uint32_t)0x000002) /*!< tmr flag channel 1 */ +#define TMR_C2_FLAG ((uint32_t)0x000004) /*!< tmr flag channel 2 */ +#define TMR_C3_FLAG ((uint32_t)0x000008) /*!< tmr flag channel 3 */ +#define TMR_C4_FLAG ((uint32_t)0x000010) /*!< tmr flag channel 4 */ +#define TMR_C5_FLAG ((uint32_t)0x010000) /*!< tmr flag channel 5 */ +#define TMR_HALL_FLAG ((uint32_t)0x000020) /*!< tmr flag hall */ +#define TMR_TRIGGER_FLAG ((uint32_t)0x000040) /*!< tmr flag trigger */ +#define TMR_BRK_FLAG ((uint32_t)0x000080) /*!< tmr flag brake */ +#define TMR_C1_RECAPTURE_FLAG ((uint32_t)0x000200) /*!< tmr flag channel 1 recapture */ +#define TMR_C2_RECAPTURE_FLAG ((uint32_t)0x000400) /*!< tmr flag channel 2 recapture */ +#define TMR_C3_RECAPTURE_FLAG ((uint32_t)0x000800) /*!< tmr flag channel 3 recapture */ +#define TMR_C4_RECAPTURE_FLAG ((uint32_t)0x001000) /*!< tmr flag channel 4 recapture */ + +/** + * @} + */ + +/** @defgroup TMR_interrupt_select_type_definition + * @brief tmr interrupt select type + * @{ + */ + +#define TMR_OVF_INT ((uint32_t)0x000001) /*!< tmr interrupt overflow */ +#define TMR_C1_INT ((uint32_t)0x000002) /*!< tmr interrupt channel 1 */ +#define TMR_C2_INT ((uint32_t)0x000004) /*!< tmr interrupt channel 2 */ +#define TMR_C3_INT ((uint32_t)0x000008) /*!< tmr interrupt channel 3 */ +#define TMR_C4_INT ((uint32_t)0x000010) /*!< tmr interrupt channel 4 */ +#define TMR_HALL_INT ((uint32_t)0x000020) /*!< tmr interrupt hall */ +#define TMR_TRIGGER_INT ((uint32_t)0x000040) /*!< tmr interrupt trigger */ +#define TMR_BRK_INT ((uint32_t)0x000080) /*!< tmr interrupt brake */ + +/** + * @} + */ + +/** @defgroup TMR_exported_types + * @{ + */ + +/** + * @brief tmr clock division type + */ +typedef enum +{ + TMR_CLOCK_DIV1 = 0x00, /*!< tmr clock division 1 */ + TMR_CLOCK_DIV2 = 0x01, /*!< tmr clock division 2 */ + TMR_CLOCK_DIV4 = 0x02 /*!< tmr clock division 4 */ +} tmr_clock_division_type; + +/** + * @brief tmr counter mode type + */ +typedef enum +{ + TMR_COUNT_UP = 0x00, /*!< tmr counter mode up */ + TMR_COUNT_DOWN = 0x01, /*!< tmr counter mode down */ + TMR_COUNT_TWO_WAY_1 = 0x02, /*!< tmr counter mode two way 1 */ + TMR_COUNT_TWO_WAY_2 = 0x04, /*!< tmr counter mode two way 2 */ + TMR_COUNT_TWO_WAY_3 = 0x06 /*!< tmr counter mode two way 3 */ +} tmr_count_mode_type; + +/** + * @brief tmr primary mode select type + */ +typedef enum +{ + TMR_PRIMARY_SEL_RESET = 0x00, /*!< tmr primary mode select reset */ + TMR_PRIMARY_SEL_ENABLE = 0x01, /*!< tmr primary mode select enable */ + TMR_PRIMARY_SEL_OVERFLOW = 0x02, /*!< tmr primary mode select overflow */ + TMR_PRIMARY_SEL_COMPARE = 0x03, /*!< tmr primary mode select compare */ + TMR_PRIMARY_SEL_C1ORAW = 0x04, /*!< tmr primary mode select c1oraw */ + TMR_PRIMARY_SEL_C2ORAW = 0x05, /*!< tmr primary mode select c2oraw */ + TMR_PRIMARY_SEL_C3ORAW = 0x06, /*!< tmr primary mode select c3oraw */ + TMR_PRIMARY_SEL_C4ORAW = 0x07 /*!< tmr primary mode select c4oraw */ +} tmr_primary_select_type; + +/** + * @brief tmr subordinate mode input select type + */ +typedef enum +{ + TMR_SUB_INPUT_SEL_IS0 = 0x00, /*!< subordinate mode input select is0 */ + TMR_SUB_INPUT_SEL_IS1 = 0x01, /*!< subordinate mode input select is1 */ + TMR_SUB_INPUT_SEL_IS2 = 0x02, /*!< subordinate mode input select is2 */ + TMR_SUB_INPUT_SEL_IS3 = 0x03, /*!< subordinate mode input select is3 */ + TMR_SUB_INPUT_SEL_C1INC = 0x04, /*!< subordinate mode input select c1inc */ + TMR_SUB_INPUT_SEL_C1DF1 = 0x05, /*!< subordinate mode input select c1df1 */ + TMR_SUB_INPUT_SEL_C2DF2 = 0x06, /*!< subordinate mode input select c2df2 */ + TMR_SUB_INPUT_SEL_EXTIN = 0x07 /*!< subordinate mode input select extin */ +} sub_tmr_input_sel_type; + +/** + * @brief tmr subordinate mode select type + */ +typedef enum +{ + TMR_SUB_MODE_DIABLE = 0x00, /*!< subordinate mode disable */ + TMR_SUB_ENCODER_MODE_A = 0x01, /*!< subordinate mode select encoder mode a */ + TMR_SUB_ENCODER_MODE_B = 0x02, /*!< subordinate mode select encoder mode b */ + TMR_SUB_ENCODER_MODE_C = 0x03, /*!< subordinate mode select encoder mode c */ + TMR_SUB_RESET_MODE = 0x04, /*!< subordinate mode select reset */ + TMR_SUB_HANG_MODE = 0x05, /*!< subordinate mode select hang */ + TMR_SUB_TRIGGER_MODE = 0x06, /*!< subordinate mode select trigger */ + TMR_SUB_EXTERNAL_CLOCK_MODE_A = 0x07 /*!< subordinate mode external clock mode a */ +} tmr_sub_mode_select_type; + +/** + * @brief tmr encoder mode type + */ +typedef enum +{ + TMR_ENCODER_MODE_A = TMR_SUB_ENCODER_MODE_A, /*!< tmr encoder mode a */ + TMR_ENCODER_MODE_B = TMR_SUB_ENCODER_MODE_B, /*!< tmr encoder mode b */ + TMR_ENCODER_MODE_C = TMR_SUB_ENCODER_MODE_C /*!< tmr encoder mode c */ +} tmr_encoder_mode_type; + +/** + * @brief tmr output control mode type + */ +typedef enum +{ + TMR_OUTPUT_CONTROL_OFF = 0x00, /*!< tmr output control mode off */ + TMR_OUTPUT_CONTROL_HIGH = 0x01, /*!< tmr output control mode high */ + TMR_OUTPUT_CONTROL_LOW = 0x02, /*!< tmr output control mode low */ + TMR_OUTPUT_CONTROL_SWITCH = 0x03, /*!< tmr output control mode switch */ + TMR_OUTPUT_CONTROL_FORCE_LOW = 0x04, /*!< tmr output control mode force low */ + TMR_OUTPUT_CONTROL_FORCE_HIGH = 0x05, /*!< tmr output control mode force high */ + TMR_OUTPUT_CONTROL_PWM_MODE_A = 0x06, /*!< tmr output control mode pwm a */ + TMR_OUTPUT_CONTROL_PWM_MODE_B = 0x07 /*!< tmr output control mode pwm b */ +} tmr_output_control_mode_type; + +/** + * @brief tmr force output type + */ +typedef enum +{ + TMR_FORCE_OUTPUT_HIGH = TMR_OUTPUT_CONTROL_FORCE_HIGH, /*!< tmr force output high */ + TMR_FORCE_OUTPUT_LOW = TMR_OUTPUT_CONTROL_FORCE_LOW /*!< tmr force output low */ +} tmr_force_output_type; + +/** + * @brief tmr output channel polarity type + */ +typedef enum +{ + TMR_OUTPUT_ACTIVE_HIGH = 0x00, /*!< tmr output channel polarity high */ + TMR_OUTPUT_ACTIVE_LOW = 0x01 /*!< tmr output channel polarity low */ +} tmr_output_polarity_type; + +/** + * @brief tmr input channel polarity type + */ +typedef enum +{ + TMR_INPUT_RISING_EDGE = 0x00, /*!< tmr input channel polarity rising */ + TMR_INPUT_FALLING_EDGE = 0x01, /*!< tmr input channel polarity falling */ + TMR_INPUT_BOTH_EDGE = 0x03 /*!< tmr input channel polarity both edge */ +} tmr_input_polarity_type; + +/** + * @brief tmr channel select type + */ +typedef enum +{ + TMR_SELECT_CHANNEL_1 = 0x00, /*!< tmr channel select channel 1 */ + TMR_SELECT_CHANNEL_1C = 0x01, /*!< tmr channel select channel 1 complementary */ + TMR_SELECT_CHANNEL_2 = 0x02, /*!< tmr channel select channel 2 */ + TMR_SELECT_CHANNEL_2C = 0x03, /*!< tmr channel select channel 2 complementary */ + TMR_SELECT_CHANNEL_3 = 0x04, /*!< tmr channel select channel 3 */ + TMR_SELECT_CHANNEL_3C = 0x05, /*!< tmr channel select channel 3 complementary */ + TMR_SELECT_CHANNEL_4 = 0x06, /*!< tmr channel select channel 4 */ + TMR_SELECT_CHANNEL_5 = 0x07 /*!< tmr channel select channel 5 */ +} tmr_channel_select_type; + +/** + * @brief tmr channel1 input connected type + */ +typedef enum +{ + TMR_CHANEL1_CONNECTED_C1IRAW = 0x00, /*!< channel1 pins is only connected to C1IRAW input */ + TMR_CHANEL1_2_3_CONNECTED_C1IRAW_XOR = 0x01 /*!< channel1/2/3 pins are connected to C1IRAW input after xored */ +} tmr_channel1_input_connected_type; + +/** + * @brief tmr input channel mapped type channel direction + */ +typedef enum +{ + TMR_CC_CHANNEL_MAPPED_DIRECT = 0x01, /*!< channel is configured as input, mapped direct */ + TMR_CC_CHANNEL_MAPPED_INDIRECT = 0x02, /*!< channel is configured as input, mapped indirect */ + TMR_CC_CHANNEL_MAPPED_STI = 0x03 /*!< channel is configured as input, mapped sti */ +} tmr_input_direction_mapped_type; + +/** + * @brief tmr input divider type + */ +typedef enum +{ + TMR_CHANNEL_INPUT_DIV_1 = 0x00, /*!< tmr channel input divider 1 */ + TMR_CHANNEL_INPUT_DIV_2 = 0x01, /*!< tmr channel input divider 2 */ + TMR_CHANNEL_INPUT_DIV_4 = 0x02, /*!< tmr channel input divider 4 */ + TMR_CHANNEL_INPUT_DIV_8 = 0x03 /*!< tmr channel input divider 8 */ +} tmr_channel_input_divider_type; + +/** + * @brief tmr dma request source select type + */ +typedef enum +{ + TMR_DMA_REQUEST_BY_CHANNEL = 0x00, /*!< tmr dma request source select channel */ + TMR_DMA_REQUEST_BY_OVERFLOW = 0x01 /*!< tmr dma request source select overflow */ +} tmr_dma_request_source_type; + +/** + * @brief tmr dma request type + */ +typedef enum +{ + TMR_OVERFLOW_DMA_REQUEST = 0x00000100, /*!< tmr dma request select overflow */ + TMR_C1_DMA_REQUEST = 0x00000200, /*!< tmr dma request select channel 1 */ + TMR_C2_DMA_REQUEST = 0x00000400, /*!< tmr dma request select channel 2 */ + TMR_C3_DMA_REQUEST = 0x00000800, /*!< tmr dma request select channel 3 */ + TMR_C4_DMA_REQUEST = 0x00001000, /*!< tmr dma request select channel 4 */ + TMR_HALL_DMA_REQUEST = 0x00002000, /*!< tmr dma request select hall */ + TMR_TRIGGER_DMA_REQUEST = 0x00004000 /*!< tmr dma request select trigger */ +} tmr_dma_request_type; + +/** + * @brief tmr event triggered by software type + */ +typedef enum +{ + TMR_OVERFLOW_SWTRIG = 0x00000001, /*!< tmr event triggered by software of overflow */ + TMR_C1_SWTRIG = 0x00000002, /*!< tmr event triggered by software of channel 1 */ + TMR_C2_SWTRIG = 0x00000004, /*!< tmr event triggered by software of channel 2 */ + TMR_C3_SWTRIG = 0x00000008, /*!< tmr event triggered by software of channel 3 */ + TMR_C4_SWTRIG = 0x00000010, /*!< tmr event triggered by software of channel 4 */ + TMR_HALL_SWTRIG = 0x00000020, /*!< tmr event triggered by software of hall */ + TMR_TRIGGER_SWTRIG = 0x00000040, /*!< tmr event triggered by software of trigger */ + TMR_BRK_SWTRIG = 0x00000080 /*!< tmr event triggered by software of brake */ +}tmr_event_trigger_type; + +/** + * @brief tmr polarity active type + */ +typedef enum +{ + TMR_POLARITY_ACTIVE_HIGH = 0x00, /*!< tmr polarity active high */ + TMR_POLARITY_ACTIVE_LOW = 0x01, /*!< tmr polarity active low */ + TMR_POLARITY_ACTIVE_BOTH = 0x02 /*!< tmr polarity active both high ande low */ +}tmr_polarity_active_type; + +/** + * @brief tmr external signal divider type + */ +typedef enum +{ + TMR_ES_FREQUENCY_DIV_1 = 0x00, /*!< tmr external signal frequency divider 1 */ + TMR_ES_FREQUENCY_DIV_2 = 0x01, /*!< tmr external signal frequency divider 2 */ + TMR_ES_FREQUENCY_DIV_4 = 0x02, /*!< tmr external signal frequency divider 4 */ + TMR_ES_FREQUENCY_DIV_8 = 0x03 /*!< tmr external signal frequency divider 8 */ +}tmr_external_signal_divider_type; + +/** + * @brief tmr external signal polarity type + */ +typedef enum +{ + TMR_ES_POLARITY_NON_INVERTED = 0x00, /*!< tmr external signal polarity non-inerted */ + TMR_ES_POLARITY_INVERTED = 0x01 /*!< tmr external signal polarity inerted */ +}tmr_external_signal_polarity_type; + +/** + * @brief tmr dma transfer length type + */ +typedef enum +{ + TMR_DMA_TRANSFER_1BYTE = 0x00, /*!< tmr dma transfer length 1 byte */ + TMR_DMA_TRANSFER_2BYTES = 0x01, /*!< tmr dma transfer length 2 bytes */ + TMR_DMA_TRANSFER_3BYTES = 0x02, /*!< tmr dma transfer length 3 bytes */ + TMR_DMA_TRANSFER_4BYTES = 0x03, /*!< tmr dma transfer length 4 bytes */ + TMR_DMA_TRANSFER_5BYTES = 0x04, /*!< tmr dma transfer length 5 bytes */ + TMR_DMA_TRANSFER_6BYTES = 0x05, /*!< tmr dma transfer length 6 bytes */ + TMR_DMA_TRANSFER_7BYTES = 0x06, /*!< tmr dma transfer length 7 bytes */ + TMR_DMA_TRANSFER_8BYTES = 0x07, /*!< tmr dma transfer length 8 bytes */ + TMR_DMA_TRANSFER_9BYTES = 0x08, /*!< tmr dma transfer length 9 bytes */ + TMR_DMA_TRANSFER_10BYTES = 0x09, /*!< tmr dma transfer length 10 bytes */ + TMR_DMA_TRANSFER_11BYTES = 0x0A, /*!< tmr dma transfer length 11 bytes */ + TMR_DMA_TRANSFER_12BYTES = 0x0B, /*!< tmr dma transfer length 12 bytes */ + TMR_DMA_TRANSFER_13BYTES = 0x0C, /*!< tmr dma transfer length 13 bytes */ + TMR_DMA_TRANSFER_14BYTES = 0x0D, /*!< tmr dma transfer length 14 bytes */ + TMR_DMA_TRANSFER_15BYTES = 0x0E, /*!< tmr dma transfer length 15 bytes */ + TMR_DMA_TRANSFER_16BYTES = 0x0F, /*!< tmr dma transfer length 16 bytes */ + TMR_DMA_TRANSFER_17BYTES = 0x10, /*!< tmr dma transfer length 17 bytes */ + TMR_DMA_TRANSFER_18BYTES = 0x11 /*!< tmr dma transfer length 18 bytes */ +}tmr_dma_transfer_length_type; + +/** + * @brief tmr dma base address type + */ +typedef enum +{ + TMR_CTRL1_ADDRESS = 0x0000, /*!< tmr dma base address ctrl1 */ + TMR_CTRL2_ADDRESS = 0x0001, /*!< tmr dma base address ctrl2 */ + TMR_STCTRL_ADDRESS = 0x0002, /*!< tmr dma base address stctrl */ + TMR_IDEN_ADDRESS = 0x0003, /*!< tmr dma base address iden */ + TMR_ISTS_ADDRESS = 0x0004, /*!< tmr dma base address ists */ + TMR_SWEVT_ADDRESS = 0x0005, /*!< tmr dma base address swevt */ + TMR_CM1_ADDRESS = 0x0006, /*!< tmr dma base address cm1 */ + TMR_CM2_ADDRESS = 0x0007, /*!< tmr dma base address cm2 */ + TMR_CCTRL_ADDRESS = 0x0008, /*!< tmr dma base address cctrl */ + TMR_CVAL_ADDRESS = 0x0009, /*!< tmr dma base address cval */ + TMR_DIV_ADDRESS = 0x000A, /*!< tmr dma base address div */ + TMR_PR_ADDRESS = 0x000B, /*!< tmr dma base address pr */ + TMR_RPR_ADDRESS = 0x000C, /*!< tmr dma base address rpr */ + TMR_C1DT_ADDRESS = 0x000D, /*!< tmr dma base address c1dt */ + TMR_C2DT_ADDRESS = 0x000E, /*!< tmr dma base address c2dt */ + TMR_C3DT_ADDRESS = 0x000F, /*!< tmr dma base address c3dt */ + TMR_C4DT_ADDRESS = 0x0010, /*!< tmr dma base address c4dt */ + TMR_BRK_ADDRESS = 0x0011, /*!< tmr dma base address brake */ + TMR_DMACTRL_ADDRESS = 0x0012 /*!< tmr dma base address dmactrl */ +}tmr_dma_address_type; + +/** + * @brief tmr brk polarity type + */ +typedef enum +{ + TMR_BRK_INPUT_ACTIVE_LOW = 0x00, /*!< tmr brk input channel active low */ + TMR_BRK_INPUT_ACTIVE_HIGH = 0x01 /*!< tmr brk input channel active high */ +}tmr_brk_polarity_type; + +/** + * @brief tmr write protect level type + */ +typedef enum +{ + TMR_WP_OFF = 0x00, /*!< tmr write protect off */ + TMR_WP_LEVEL_3 = 0x01, /*!< tmr write protect level 3 */ + TMR_WP_LEVEL_2 = 0x02, /*!< tmr write protect level 2 */ + TMR_WP_LEVEL_1 = 0x03 /*!< tmr write protect level 1 */ +}tmr_wp_level_type; + +/** + * @brief tmr input remap type + */ +typedef enum +{ + TMR2_TMR8TRGOUT_TMR5_GPIO = 0x00, /*!< tmr2 input remap to tmr8_trgout or tmr5 remap to gpio */ + TMR2_PTP_TMR5_LICK = 0x01, /*!< tmr2 input remap to ptp or tmr5 remap to lick */ + TMR2_OTG1FS_TMR5_LEXT = 0x02, /*!< tmr2 input remap to otg1fs or tmr5 remap to lext */ + TMR2_OTG2FS_TMR5_ERTC = 0x03 /*!< tmr2 input remap to otg2fs or tmr5 remap to ertc */ +}tmr_input_remap_type ; +/** + + * @brief tmr output config type + */ +typedef struct +{ + tmr_output_control_mode_type oc_mode; /*!< output channel mode */ + confirm_state oc_idle_state; /*!< output channel idle state */ + confirm_state occ_idle_state; /*!< output channel complementary idle state */ + tmr_output_polarity_type oc_polarity; /*!< output channel polarity */ + tmr_output_polarity_type occ_polarity; /*!< output channel complementary polarity */ + confirm_state oc_output_state; /*!< output channel enable */ + confirm_state occ_output_state; /*!< output channel complementary enable */ +} tmr_output_config_type; + +/** + * @brief tmr input capture config type + */ +typedef struct +{ + tmr_channel_select_type input_channel_select; /*!< tmr input channel select */ + tmr_input_polarity_type input_polarity_select; /*!< tmr input polarity select */ + tmr_input_direction_mapped_type input_mapped_select; /*!< tmr channel mapped direct or indirect */ + uint8_t input_filter_value; /*!< tmr channel filter value */ +} tmr_input_config_type; + +/** + * @brief tmr brkdt config type + */ +typedef struct +{ + uint8_t deadtime; /*!< dead-time generator setup */ + tmr_brk_polarity_type brk_polarity; /*!< tmr brake polarity */ + tmr_wp_level_type wp_level; /*!< write protect configuration */ + confirm_state auto_output_enable; /*!< automatic output enable */ + confirm_state fcsoen_state; /*!< frozen channel status when output enable */ + confirm_state fcsodis_state; /*!< frozen channel status when output disable */ + confirm_state brk_enable; /*!< tmr brk enale */ +} tmr_brkdt_config_type; + +/** + * @brief type define tmr register all + */ +typedef struct +{ + /** + * @brief tmr ctrl1 register, offset:0x00 + */ + union + { + __IO uint32_t ctrl1; + struct + { + __IO uint32_t tmren : 1; /* [0] */ + __IO uint32_t ovfen : 1; /* [1] */ + __IO uint32_t ovfs : 1; /* [2] */ + __IO uint32_t ocmen : 1; /* [3] */ + __IO uint32_t cnt_dir : 3; /* [6:4] */ + __IO uint32_t prben : 1; /* [7] */ + __IO uint32_t clkdiv : 2; /* [9:8] */ + __IO uint32_t pmen : 1; /* [10] */ + __IO uint32_t reserved1 : 21;/* [31:11] */ + } ctrl1_bit; + }; + + /** + * @brief tmr ctrl2 register, offset:0x04 + */ + union + { + __IO uint32_t ctrl2; + struct + { + __IO uint32_t cbctrl : 1; /* [0] */ + __IO uint32_t reserved1 : 1; /* [1] */ + __IO uint32_t ccfs : 1; /* [2] */ + __IO uint32_t drs : 1; /* [3] */ + __IO uint32_t ptos : 3; /* [6:4] */ + __IO uint32_t c1insel : 1; /* [7] */ + __IO uint32_t c1ios : 1; /* [8] */ + __IO uint32_t c1cios : 1; /* [9] */ + __IO uint32_t c2ios : 1; /* [10] */ + __IO uint32_t c2cios : 1; /* [11] */ + __IO uint32_t c3ios : 1; /* [12] */ + __IO uint32_t c3cios : 1; /* [13] */ + __IO uint32_t c4ios : 1; /* [14] */ + __IO uint32_t reserved2 : 16;/* [30:15] */ + __IO uint32_t trgout2en : 1; /* [31] */ + } ctrl2_bit; + }; + + /** + * @brief tmr smc register, offset:0x08 + */ + union + { + __IO uint32_t stctrl; + struct + { + __IO uint32_t smsel : 3; /* [2:0] */ + __IO uint32_t reserved1 : 1; /* [3] */ + __IO uint32_t stis : 3; /* [6:4] */ + __IO uint32_t sts : 1; /* [7] */ + __IO uint32_t esf : 4; /* [11:8] */ + __IO uint32_t esdiv : 2; /* [13:12] */ + __IO uint32_t ecmben : 1; /* [14] */ + __IO uint32_t esp : 1; /* [15] */ + __IO uint32_t reserved2 : 16;/* [31:16] */ + } stctrl_bit; + }; + + /** + * @brief tmr die register, offset:0x0C + */ + union + { + __IO uint32_t iden; + struct + { + __IO uint32_t ovfien : 1; /* [0] */ + __IO uint32_t c1ien : 1; /* [1] */ + __IO uint32_t c2ien : 1; /* [2] */ + __IO uint32_t c3ien : 1; /* [3] */ + __IO uint32_t c4ien : 1; /* [4] */ + __IO uint32_t hallien : 1; /* [5] */ + __IO uint32_t tien : 1; /* [6] */ + __IO uint32_t brkie : 1; /* [7] */ + __IO uint32_t ovfden : 1; /* [8] */ + __IO uint32_t c1den : 1; /* [9] */ + __IO uint32_t c2den : 1; /* [10] */ + __IO uint32_t c3den : 1; /* [11] */ + __IO uint32_t c4den : 1; /* [12] */ + __IO uint32_t hallde : 1; /* [13] */ + __IO uint32_t tden : 1; /* [14] */ + __IO uint32_t reserved1 : 17;/* [31:15] */ + } iden_bit; + }; + + /** + * @brief tmr ists register, offset:0x10 + */ + union + { + __IO uint32_t ists; + struct + { + __IO uint32_t ovfif : 1; /* [0] */ + __IO uint32_t c1if : 1; /* [1] */ + __IO uint32_t c2if : 1; /* [2] */ + __IO uint32_t c3if : 1; /* [3] */ + __IO uint32_t c4if : 1; /* [4] */ + __IO uint32_t hallif : 1; /* [5] */ + __IO uint32_t trgif : 1; /* [6] */ + __IO uint32_t brkif : 1; /* [7] */ + __IO uint32_t reserved1 : 1; /* [8] */ + __IO uint32_t c1rf : 1; /* [9] */ + __IO uint32_t c2rf : 1; /* [10] */ + __IO uint32_t c3rf : 1; /* [11] */ + __IO uint32_t c4rf : 1; /* [12] */ + __IO uint32_t reserved2 : 19;/* [31:13] */ + } ists_bit; + }; + + /** + * @brief tmr eveg register, offset:0x14 + */ + union + { + __IO uint32_t swevt; + struct + { + __IO uint32_t ovfswtr : 1; /* [0] */ + __IO uint32_t c1swtr : 1; /* [1] */ + __IO uint32_t c2swtr : 1; /* [2] */ + __IO uint32_t c3swtr : 1; /* [3] */ + __IO uint32_t c4swtr : 1; /* [4] */ + __IO uint32_t hallswtr : 1; /* [5] */ + __IO uint32_t trgswtr : 1; /* [6] */ + __IO uint32_t brkswtr : 1; /* [7] */ + __IO uint32_t reserved : 24;/* [31:8] */ + } swevt_bit; + }; + + /** + * @brief tmr ccm1 register, offset:0x18 + */ + union + { + __IO uint32_t cm1; + + /** + * @brief channel mode + */ + struct + { + __IO uint32_t c1c : 2; /* [1:0] */ + __IO uint32_t c1oien : 1; /* [2] */ + __IO uint32_t c1oben : 1; /* [3] */ + __IO uint32_t c1octrl : 3; /* [6:4] */ + __IO uint32_t c1osen : 1; /* [7] */ + __IO uint32_t c2c : 2; /* [9:8] */ + __IO uint32_t c2oien : 1; /* [10] */ + __IO uint32_t c2oben : 1; /* [11] */ + __IO uint32_t c2octrl : 3; /* [14:12] */ + __IO uint32_t c2osen : 1; /* [15] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } cm1_output_bit; + + /** + * @brief input capture mode + */ + struct + { + __IO uint32_t c1c : 2; /* [1:0] */ + __IO uint32_t c1idiv : 2; /* [3:2] */ + __IO uint32_t c1df : 4; /* [7:4] */ + __IO uint32_t c2c : 2; /* [9:8] */ + __IO uint32_t c2idiv : 2; /* [11:10] */ + __IO uint32_t c2df : 4; /* [15:12] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } cm1_input_bit; + }; + + /** + * @brief tmr ccm2 register, offset:0x1C + */ + union + { + __IO uint32_t cm2; + + /** + * @brief channel mode + */ + struct + { + __IO uint32_t c3c : 2; /* [1:0] */ + __IO uint32_t c3oien : 1; /* [2] */ + __IO uint32_t c3oben : 1; /* [3] */ + __IO uint32_t c3octrl : 3; /* [6:4] */ + __IO uint32_t c3osen : 1; /* [7] */ + __IO uint32_t c4c : 2; /* [9:8] */ + __IO uint32_t c4oien : 1; /* [10] */ + __IO uint32_t c4oben : 1; /* [11] */ + __IO uint32_t c4octrl : 3; /* [14:12] */ + __IO uint32_t c4osen : 1; /* [15] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } cm2_output_bit; + + /** + * @brief input capture mode + */ + struct + { + __IO uint32_t c3c : 2; /* [1:0] */ + __IO uint32_t c3idiv : 2; /* [3:2] */ + __IO uint32_t c3df : 4; /* [7:4] */ + __IO uint32_t c4c : 2; /* [9:8] */ + __IO uint32_t c4idiv : 2; /* [11:10] */ + __IO uint32_t c4df : 4; /* [15:12] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } cm2_input_bit; + }; + + /** + * @brief tmr cce register, offset:0x20 + */ + union + { + uint32_t cctrl; + struct + { + __IO uint32_t c1en : 1; /* [0] */ + __IO uint32_t c1p : 1; /* [1] */ + __IO uint32_t c1cen : 1; /* [2] */ + __IO uint32_t c1cp : 1; /* [3] */ + __IO uint32_t c2en : 1; /* [4] */ + __IO uint32_t c2p : 1; /* [5] */ + __IO uint32_t c2cen : 1; /* [6] */ + __IO uint32_t c2cp : 1; /* [7] */ + __IO uint32_t c3en : 1; /* [8] */ + __IO uint32_t c3p : 1; /* [9] */ + __IO uint32_t c3cen : 1; /* [10] */ + __IO uint32_t c3cp : 1; /* [11] */ + __IO uint32_t c4en : 1; /* [12] */ + __IO uint32_t c4p : 1; /* [13] */ + __IO uint32_t reserved1 : 18;/* [31:14] */ + } cctrl_bit; + }; + + /** + * @brief tmr cnt register, offset:0x24 + */ + union + { + __IO uint32_t cval; + struct + { + __IO uint32_t cval : 32;/* [31:0] */ + } cval_bit; + }; + + /** + * @brief tmr div, offset:0x28 + */ + union + { + __IO uint32_t div; + struct + { + __IO uint32_t div : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } div_bit; + }; + + /** + * @brief tmr pr register, offset:0x2C + */ + union + { + __IO uint32_t pr; + struct + { + __IO uint32_t pr : 32;/* [31:0] */ + } pr_bit; + }; + + /** + * @brief tmr rpr register, offset:0x30 + */ + union + { + __IO uint32_t rpr; + struct + { + __IO uint32_t rpr : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } rpr_bit; + }; + + /** + * @brief tmr c1dt register, offset:0x34 + */ + union + { + uint32_t c1dt; + struct + { + __IO uint32_t c1dt : 32;/* [31:0] */ + } c1dt_bit; + }; + + /** + * @brief tmr c2dt register, offset:0x38 + */ + union + { + uint32_t c2dt; + struct + { + __IO uint32_t c2dt : 32;/* [31:0] */ + } c2dt_bit; + }; + + /** + * @brief tmr c3dt register, offset:0x3C + */ + union + { + __IO uint32_t c3dt; + struct + { + __IO uint32_t c3dt : 32;/* [31:0] */ + } c3dt_bit; + }; + + /** + * @brief tmr c4dt register, offset:0x40 + */ + union + { + __IO uint32_t c4dt; + struct + { + __IO uint32_t c4dt : 32;/* [31:0] */ + } c4dt_bit; + }; + + /** + * @brief tmr brk register, offset:0x44 + */ + union + { + __IO uint32_t brk; + struct + { + __IO uint32_t dtc : 8; /* [7:0] */ + __IO uint32_t wpc : 2; /* [9:8] */ + __IO uint32_t fcsodis : 1; /* [10] */ + __IO uint32_t fcsoen : 1; /* [11] */ + __IO uint32_t brken : 1; /* [12] */ + __IO uint32_t brkv : 1; /* [13] */ + __IO uint32_t aoen : 1; /* [14] */ + __IO uint32_t oen : 1; /* [15] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } brk_bit; + }; + /** + * @brief tmr dmactrl register, offset:0x48 + */ + union + { + __IO uint32_t dmactrl; + struct + { + __IO uint32_t addr : 5; /* [4:0] */ + __IO uint32_t reserved1 : 3; /* [7:5] */ + __IO uint32_t dtb : 5; /* [12:8] */ + __IO uint32_t reserved2 : 19;/* [31:13] */ + } dmactrl_bit; + }; + + /** + * @brief tmr dmadt register, offset:0x4C + */ + union + { + __IO uint32_t dmadt; + struct + { + __IO uint32_t dmadt : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } dmadt_bit; + }; + + /** + * @brief tmr rmp register, offset:0x50 + */ + union + { + __IO uint32_t rmp; + struct + { + __IO uint32_t reserved1 : 6; /* [5:0] */ + __IO uint32_t tmr5_ch4_irmp : 2; /* [7:6] */ + __IO uint32_t reserved2 : 2; /* [9:8] */ + __IO uint32_t tmr2_ch1_irmp : 2; /* [11:10] */ + __IO uint32_t reserved3 : 20;/* [31:16] */ + } rmp_bit; + }; + + /** + * @brief tmr reserved0 register, offset:0x54-0x6C + */ + __IO uint32_t reserved1[7]; + + /** + * @brief tmr cm3 register, offset:0x70 + */ + union + { + __IO uint32_t cm3; + struct + { + __IO uint32_t reserved1 : 2; /* [1:0] */ + __IO uint32_t c5oien : 1; /* [2] */ + __IO uint32_t c5oben : 1; /* [3] */ + __IO uint32_t c5octrl : 3; /* [6:4] */ + __IO uint32_t c5osen : 1; /* [7] */ + __IO uint32_t reserved2 : 24;/* [31:8] */ + } cm3_output_bit; + }; + + /** + * @brief tmr c5dt register, offset:0x74 + */ + union + { + __IO uint32_t c5dt; + struct + { + __IO uint32_t c5dt : 32;/* [31:0] */ + } c5dt_bit; + }; +} tmr_type; + +/** + * @} + */ + +#define TMR1 ((tmr_type *) TMR1_BASE) +#define TMR2 ((tmr_type *) TMR2_BASE) +#define TMR3 ((tmr_type *) TMR3_BASE) +#define TMR4 ((tmr_type *) TMR4_BASE) +#define TMR5 ((tmr_type *) TMR5_BASE) +#define TMR6 ((tmr_type *) TMR6_BASE) +#define TMR7 ((tmr_type *) TMR7_BASE) +#define TMR8 ((tmr_type *) TMR8_BASE) +#define TMR9 ((tmr_type *) TMR9_BASE) +#define TMR10 ((tmr_type *) TMR10_BASE) +#define TMR11 ((tmr_type *) TMR11_BASE) +#define TMR12 ((tmr_type *) TMR12_BASE) +#define TMR13 ((tmr_type *) TMR13_BASE) +#define TMR14 ((tmr_type *) TMR14_BASE) +#define TMR20 ((tmr_type *) TMR20_BASE) + +/** @defgroup TMR_exported_functions + * @{ + */ + +void tmr_reset(tmr_type *tmr_x); +void tmr_counter_enable(tmr_type *tmr_x, confirm_state new_state); +void tmr_output_default_para_init(tmr_output_config_type *tmr_output_struct); +void tmr_input_default_para_init(tmr_input_config_type *tmr_input_struct); +void tmr_brkdt_default_para_init(tmr_brkdt_config_type *tmr_brkdt_struct); +void tmr_base_init(tmr_type* tmr_x, uint32_t tmr_pr, uint32_t tmr_div); +void tmr_clock_source_div_set(tmr_type *tmr_x, tmr_clock_division_type tmr_clock_div); +void tmr_cnt_dir_set(tmr_type *tmr_x, tmr_count_mode_type tmr_cnt_dir); +void tmr_repetition_counter_set(tmr_type *tmr_x, uint16_t tmr_rpr_value); +void tmr_counter_value_set(tmr_type *tmr_x, uint32_t tmr_cnt_value); +uint32_t tmr_counter_value_get(tmr_type *tmr_x); +void tmr_div_value_set(tmr_type *tmr_x, uint32_t tmr_div_value); +uint32_t tmr_div_value_get(tmr_type *tmr_x); +void tmr_output_channel_config(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_output_config_type *tmr_output_struct); +void tmr_output_channel_mode_select(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_output_control_mode_type oc_mode); +void tmr_period_value_set(tmr_type *tmr_x, uint32_t tmr_pr_value); +uint32_t tmr_period_value_get(tmr_type *tmr_x); +void tmr_channel_value_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + uint32_t tmr_channel_value); +uint32_t tmr_channel_value_get(tmr_type *tmr_x, tmr_channel_select_type tmr_channel); +void tmr_period_buffer_enable(tmr_type *tmr_x, confirm_state new_state); +void tmr_output_channel_buffer_enable(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + confirm_state new_state); +void tmr_output_channel_immediately_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + confirm_state new_state); +void tmr_output_channel_switch_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + confirm_state new_state); +void tmr_one_cycle_mode_enable(tmr_type *tmr_x, confirm_state new_state); +void tmr_32_bit_function_enable (tmr_type *tmr_x, confirm_state new_state); +void tmr_overflow_request_source_set(tmr_type *tmr_x, confirm_state new_state); +void tmr_overflow_event_disable(tmr_type *tmr_x, confirm_state new_state); +void tmr_input_channel_init(tmr_type *tmr_x, tmr_input_config_type *input_struct, \ + tmr_channel_input_divider_type divider_factor); +void tmr_channel_enable(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, confirm_state new_state); +void tmr_input_channel_filter_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + uint16_t filter_value); +void tmr_pwm_input_config(tmr_type *tmr_x, tmr_input_config_type *input_struct, \ + tmr_channel_input_divider_type divider_factor); +void tmr_channel1_input_select(tmr_type *tmr_x, tmr_channel1_input_connected_type ch1_connect); +void tmr_input_channel_divider_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_channel_input_divider_type divider_factor); +void tmr_primary_mode_select(tmr_type *tmr_x, tmr_primary_select_type primary_mode); +void tmr_sub_mode_select(tmr_type *tmr_x, tmr_sub_mode_select_type sub_mode); +void tmr_channel_dma_select(tmr_type *tmr_x, tmr_dma_request_source_type cc_dma_select); +void tmr_hall_select(tmr_type *tmr_x, confirm_state new_state); +void tmr_channel_buffer_enable(tmr_type *tmr_x, confirm_state new_state); +void tmr_trgout2_enable(tmr_type *tmr_x, confirm_state new_state); +void tmr_trigger_input_select(tmr_type *tmr_x, sub_tmr_input_sel_type trigger_select); +void tmr_sub_sync_mode_set(tmr_type *tmr_x, confirm_state new_state); +void tmr_dma_request_enable(tmr_type *tmr_x, tmr_dma_request_type dma_request, confirm_state new_state); +void tmr_interrupt_enable(tmr_type *tmr_x, uint32_t tmr_interrupt, confirm_state new_state); +flag_status tmr_interrupt_flag_get(tmr_type *tmr_x, uint32_t tmr_flag); +flag_status tmr_flag_get(tmr_type *tmr_x, uint32_t tmr_flag); +void tmr_flag_clear(tmr_type *tmr_x, uint32_t tmr_flag); +void tmr_event_sw_trigger(tmr_type *tmr_x, tmr_event_trigger_type tmr_event); +void tmr_output_enable(tmr_type *tmr_x, confirm_state new_state); +void tmr_internal_clock_set(tmr_type *tmr_x); +void tmr_output_channel_polarity_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_polarity_active_type oc_polarity); +void tmr_external_clock_config(tmr_type *tmr_x, tmr_external_signal_divider_type es_divide, \ + tmr_external_signal_polarity_type es_polarity, uint16_t es_filter); +void tmr_external_clock_mode1_config(tmr_type *tmr_x, tmr_external_signal_divider_type es_divide, \ + tmr_external_signal_polarity_type es_polarity, uint16_t es_filter); +void tmr_external_clock_mode2_config(tmr_type *tmr_x, tmr_external_signal_divider_type es_divide, \ + tmr_external_signal_polarity_type es_polarity, uint16_t es_filter); +void tmr_encoder_mode_config(tmr_type *tmr_x, tmr_encoder_mode_type encoder_mode, tmr_input_polarity_type \ + ic1_polarity, tmr_input_polarity_type ic2_polarity); +void tmr_force_output_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_force_output_type force_output); +void tmr_dma_control_config(tmr_type *tmr_x, tmr_dma_transfer_length_type dma_length, \ + tmr_dma_address_type dma_base_address); +void tmr_brkdt_config(tmr_type *tmr_x, tmr_brkdt_config_type *brkdt_struct); +void tmr_iremap_config(tmr_type *tmr_x, tmr_input_remap_type input_remap); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_usart.h b/armlib/at32_sys/drivers/inc/at32f435_437_usart.h new file mode 100644 index 000000000..9ac1bb87d --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_usart.h @@ -0,0 +1,414 @@ +/** + ************************************************************************** + * @file at32f435_437_usart.h + * @brief at32f435_437 usart header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_USART_H +#define __AT32F435_437_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/** @defgroup USART_flags_definition + * @brief usart flag + * @{ + */ + +#define USART_PERR_FLAG ((uint32_t)0x00000001) /*!< usart parity error flag */ +#define USART_FERR_FLAG ((uint32_t)0x00000002) /*!< usart framing error flag */ +#define USART_NERR_FLAG ((uint32_t)0x00000004) /*!< usart noise error flag */ +#define USART_ROERR_FLAG ((uint32_t)0x00000008) /*!< usart receiver overflow error flag */ +#define USART_IDLEF_FLAG ((uint32_t)0x00000010) /*!< usart idle flag */ +#define USART_RDBF_FLAG ((uint32_t)0x00000020) /*!< usart receive data buffer full flag */ +#define USART_TDC_FLAG ((uint32_t)0x00000040) /*!< usart transmit data complete flag */ +#define USART_TDBE_FLAG ((uint32_t)0x00000080) /*!< usart transmit data buffer empty flag */ +#define USART_BFF_FLAG ((uint32_t)0x00000100) /*!< usart break frame flag */ +#define USART_CTSCF_FLAG ((uint32_t)0x00000200) /*!< usart cts change flag */ + +/** + * @} + */ + +/** @defgroup USART_interrupts_definition + * @brief usart interrupt + * @{ + */ + +#define USART_IDLE_INT MAKE_VALUE(0x0C,0x04) /*!< usart idle interrupt */ +#define USART_RDBF_INT MAKE_VALUE(0x0C,0x05) /*!< usart receive data buffer full interrupt */ +#define USART_TDC_INT MAKE_VALUE(0x0C,0x06) /*!< usart transmit data complete interrupt */ +#define USART_TDBE_INT MAKE_VALUE(0x0C,0x07) /*!< usart transmit data buffer empty interrupt */ +#define USART_PERR_INT MAKE_VALUE(0x0C,0x08) /*!< usart parity error interrupt */ +#define USART_BF_INT MAKE_VALUE(0x10,0x06) /*!< usart break frame interrupt */ +#define USART_ERR_INT MAKE_VALUE(0x14,0x00) /*!< usart error interrupt */ +#define USART_CTSCF_INT MAKE_VALUE(0x14,0x0A) /*!< usart cts change interrupt */ + +/** + * @} + */ + +/** @defgroup USART_exported_types + * @{ + */ + +/** + * @brief usart parity selection type + */ +typedef enum +{ + USART_PARITY_NONE = 0x00, /*!< usart no parity */ + USART_PARITY_EVEN = 0x01, /*!< usart even parity */ + USART_PARITY_ODD = 0x02 /*!< usart odd parity */ +} usart_parity_selection_type; + +/** + * @brief usart wakeup mode type + */ +typedef enum +{ + USART_WAKEUP_BY_IDLE_FRAME = 0x00, /*!< usart wakeup by idle frame */ + USART_WAKEUP_BY_MATCHING_ID = 0x01 /*!< usart wakeup by matching id */ +} usart_wakeup_mode_type; + +/** + * @brief usart data bit num type + */ +typedef enum +{ + USART_DATA_7BITS = 0x00, /*!< usart data size is 7 bits */ + USART_DATA_8BITS = 0x01, /*!< usart data size is 8 bits */ + USART_DATA_9BITS = 0x02 /*!< usart data size is 9 bits */ +} usart_data_bit_num_type; + +/** + * @brief usart break frame bit num type + */ +typedef enum +{ + USART_BREAK_10BITS = 0x00, /*!< usart lin mode berak frame detection 10 bits */ + USART_BREAK_11BITS = 0x01 /*!< usart lin mode berak frame detection 11 bits */ +} usart_break_bit_num_type; + +/** + * @brief usart phase of the clock type + */ +typedef enum +{ + USART_CLOCK_PHASE_1EDGE = 0x00, /*!< usart data capture is done on the clock leading edge */ + USART_CLOCK_PHASE_2EDGE = 0x01 /*!< usart data capture is done on the clock trailing edge */ +} usart_clock_phase_type; + +/** + * @brief usart polarity of the clock type + */ +typedef enum +{ + USART_CLOCK_POLARITY_LOW = 0x00, /*!< usart clock stay low level outside transmission window */ + USART_CLOCK_POLARITY_HIGH = 0x01 /*!< usart clock stay high level outside transmission window */ +} usart_clock_polarity_type; + +/** + * @brief usart last bit clock pulse type + */ +typedef enum +{ + USART_CLOCK_LAST_BIT_NONE = 0x00, /*!< usart clock pulse of the last data bit is not outputted */ + USART_CLOCK_LAST_BIT_OUTPUT = 0x01 /*!< usart clock pulse of the last data bit is outputted */ +} usart_lbcp_type; + +/** + * @brief usart stop bit num type + */ +typedef enum +{ + USART_STOP_1_BIT = 0x00, /*!< usart stop bits num is 1 */ + USART_STOP_0_5_BIT = 0x01, /*!< usart stop bits num is 0.5 */ + USART_STOP_2_BIT = 0x02, /*!< usart stop bits num is 2 */ + USART_STOP_1_5_BIT = 0x03 /*!< usart stop bits num is 1.5 */ +} usart_stop_bit_num_type; + +/** + * @brief usart hardware flow control type + */ +typedef enum +{ + USART_HARDWARE_FLOW_NONE = 0x00, /*!< usart without hardware flow */ + USART_HARDWARE_FLOW_RTS = 0x01, /*!< usart hardware flow only rts */ + USART_HARDWARE_FLOW_CTS = 0x02, /*!< usart hardware flow only cts */ + USART_HARDWARE_FLOW_RTS_CTS = 0x03 /*!< usart hardware flow both rts and cts */ +} usart_hardware_flow_control_type; + +/** + * @brief usart identification bit num type + */ +typedef enum +{ + USART_ID_FIXED_4_BIT = 0x00, /*!< usart id bit num fixed 4 bits */ + USART_ID_RELATED_DATA_BIT = 0x01 /*!< usart id bit num related data bits */ +} usart_identification_bit_num_type; + +/** + * @brief usart de polarity type + */ +typedef enum +{ + USART_DE_POLARITY_HIGH = 0x00, /*!< usart de polarity high */ + USART_DE_POLARITY_LOW = 0x01 /*!< usart de polarity low */ +} usart_de_polarity_type; + +/** + * @brief type define usart register all + */ +typedef struct +{ + /** + * @brief usart sts register, offset:0x00 + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t perr : 1; /* [0] */ + __IO uint32_t ferr : 1; /* [1] */ + __IO uint32_t nerr : 1; /* [2] */ + __IO uint32_t roerr : 1; /* [3] */ + __IO uint32_t idlef : 1; /* [4] */ + __IO uint32_t rdbf : 1; /* [5] */ + __IO uint32_t tdc : 1; /* [6] */ + __IO uint32_t tdbe : 1; /* [7] */ + __IO uint32_t bff : 1; /* [8] */ + __IO uint32_t ctscf : 1; /* [9] */ + __IO uint32_t reserved1 : 22;/* [31:10] */ + } sts_bit; + }; + + /** + * @brief usart dt register, offset:0x04 + */ + union + { + __IO uint32_t dt; + struct + { + __IO uint32_t dt : 9; /* [8:0] */ + __IO uint32_t reserved1 : 23;/* [31:9] */ + } dt_bit; + }; + + /** + * @brief usart baudr register, offset:0x08 + */ + union + { + __IO uint32_t baudr; + struct + { + __IO uint32_t div : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } baudr_bit; + }; + + /** + * @brief usart ctrl1 register, offset:0x0C + */ + union + { + __IO uint32_t ctrl1; + struct + { + __IO uint32_t sbf : 1; /* [0] */ + __IO uint32_t rm : 1; /* [1] */ + __IO uint32_t ren : 1; /* [2] */ + __IO uint32_t ten : 1; /* [3] */ + __IO uint32_t idleien : 1; /* [4] */ + __IO uint32_t rdbfien : 1; /* [5] */ + __IO uint32_t tdcien : 1; /* [6] */ + __IO uint32_t tdbeien : 1; /* [7] */ + __IO uint32_t perrien : 1; /* [8] */ + __IO uint32_t psel : 1; /* [9] */ + __IO uint32_t pen : 1; /* [10] */ + __IO uint32_t wum : 1; /* [11] */ + __IO uint32_t dbn_l : 1; /* [12] */ + __IO uint32_t uen : 1; /* [13] */ + __IO uint32_t reserved1 : 2; /* [15:14] */ + __IO uint32_t tcdt : 5; /* [20:16] */ + __IO uint32_t tsdt : 5; /* [25:21] */ + __IO uint32_t reserved2 : 2; /* [27:26] */ + __IO uint32_t dbn_h : 1; /* [28] */ + __IO uint32_t reserved3 : 3; /* [31:29] */ + } ctrl1_bit; + }; + + /** + * @brief usart ctrl2 register, offset:0x10 + */ + union + { + __IO uint32_t ctrl2; + struct + { + __IO uint32_t id_l : 4; /* [3:0] */ + __IO uint32_t idbn : 1; /* [4] */ + __IO uint32_t bfbn : 1; /* [5] */ + __IO uint32_t bfien : 1; /* [6] */ + __IO uint32_t reserved1 : 1; /* [7] */ + __IO uint32_t lbcp : 1; /* [8] */ + __IO uint32_t clkpha : 1; /* [9] */ + __IO uint32_t clkpol : 1; /* [10] */ + __IO uint32_t clken : 1; /* [11] */ + __IO uint32_t stopbn : 2; /* [13:12] */ + __IO uint32_t linen : 1; /* [14] */ + __IO uint32_t trpswap : 1; /* [15] */ + __IO uint32_t reserved2 : 12;/* [27:16] */ + __IO uint32_t id_h : 4; /* [31:28] */ + } ctrl2_bit; + }; + + /** + * @brief usart ctrl3 register, offset:0x14 + */ + union + { + __IO uint32_t ctrl3; + struct + { + __IO uint32_t errien : 1; /* [0] */ + __IO uint32_t irdaen : 1; /* [1] */ + __IO uint32_t irdalp : 1; /* [2] */ + __IO uint32_t slben : 1; /* [3] */ + __IO uint32_t scnacken : 1; /* [4] */ + __IO uint32_t scmen : 1; /* [5] */ + __IO uint32_t dmaren : 1; /* [6] */ + __IO uint32_t dmaten : 1; /* [7] */ + __IO uint32_t rtsen : 1; /* [8] */ + __IO uint32_t ctsen : 1; /* [9] */ + __IO uint32_t ctscfien : 1; /* [10] */ + __IO uint32_t reserved1 : 3; /* [13:11] */ + __IO uint32_t rs485en : 1; /* [14] */ + __IO uint32_t dep : 1; /* [15] */ + __IO uint32_t reserved2 : 16;/* [31:16] */ + } ctrl3_bit; + }; + + /** + * @brief usart gdiv register, offset:0x18 + */ + union + { + __IO uint32_t gdiv; + struct + { + __IO uint32_t isdiv : 8; /* [7:0] */ + __IO uint32_t scgt : 8; /* [15:8] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } gdiv_bit; + }; +} usart_type; + +/** + * @} + */ + +#define USART1 ((usart_type *) USART1_BASE) +#define USART2 ((usart_type *) USART2_BASE) +#define USART3 ((usart_type *) USART3_BASE) +#define UART4 ((usart_type *) UART4_BASE) +#define UART5 ((usart_type *) UART5_BASE) +#define USART6 ((usart_type *) USART6_BASE) +#define UART7 ((usart_type *) UART7_BASE) +#if defined (AT32F435Zx) || defined (AT32F435Vx) || defined (AT32F435Rx) || \ + defined (AT32F437Zx) || defined (AT32F437Vx) || defined (AT32F437Rx) +#define UART8 ((usart_type *) UART8_BASE) +#endif + +/** @defgroup USART_exported_functions + * @{ + */ + +void usart_reset(usart_type* usart_x); +void usart_init(usart_type* usart_x, uint32_t baud_rate, usart_data_bit_num_type data_bit, usart_stop_bit_num_type stop_bit); +void usart_parity_selection_config(usart_type* usart_x, usart_parity_selection_type parity); +void usart_enable(usart_type* usart_x, confirm_state new_state); +void usart_transmitter_enable(usart_type* usart_x, confirm_state new_state); +void usart_receiver_enable(usart_type* usart_x, confirm_state new_state); +void usart_clock_config(usart_type* usart_x, usart_clock_polarity_type clk_pol, usart_clock_phase_type clk_pha, usart_lbcp_type clk_lb); +void usart_clock_enable(usart_type* usart_x, confirm_state new_state); +void usart_interrupt_enable(usart_type* usart_x, uint32_t usart_int, confirm_state new_state); +void usart_dma_transmitter_enable(usart_type* usart_x, confirm_state new_state); +void usart_dma_receiver_enable(usart_type* usart_x, confirm_state new_state); +void usart_wakeup_id_set(usart_type* usart_x, uint8_t usart_id); +void usart_wakeup_mode_set(usart_type* usart_x, usart_wakeup_mode_type wakeup_mode); +void usart_receiver_mute_enable(usart_type* usart_x, confirm_state new_state); +void usart_break_bit_num_set(usart_type* usart_x, usart_break_bit_num_type break_bit); +void usart_lin_mode_enable(usart_type* usart_x, confirm_state new_state); +void usart_data_transmit(usart_type* usart_x, uint16_t data); +uint16_t usart_data_receive(usart_type* usart_x); +void usart_break_send(usart_type* usart_x); +void usart_smartcard_guard_time_set(usart_type* usart_x, uint8_t guard_time_val); +void usart_irda_smartcard_division_set(usart_type* usart_x, uint8_t div_val); +void usart_smartcard_mode_enable(usart_type* usart_x, confirm_state new_state); +void usart_smartcard_nack_set(usart_type* usart_x, confirm_state new_state); +void usart_single_line_halfduplex_select(usart_type* usart_x, confirm_state new_state); +void usart_irda_mode_enable(usart_type* usart_x, confirm_state new_state); +void usart_irda_low_power_enable(usart_type* usart_x, confirm_state new_state); +void usart_hardware_flow_control_set(usart_type* usart_x,usart_hardware_flow_control_type flow_state); +flag_status usart_flag_get(usart_type* usart_x, uint32_t flag); +flag_status usart_interrupt_flag_get(usart_type* usart_x, uint32_t flag); +void usart_flag_clear(usart_type* usart_x, uint32_t flag); +void usart_rs485_delay_time_config(usart_type* usart_x, uint8_t start_delay_time, uint8_t complete_delay_time); +void usart_transmit_receive_pin_swap(usart_type* usart_x, confirm_state new_state); +void usart_id_bit_num_set(usart_type* usart_x, usart_identification_bit_num_type id_bit_num); +void usart_de_polarity_set(usart_type* usart_x, usart_de_polarity_type de_polarity); +void usart_rs485_mode_enable(usart_type* usart_x, confirm_state new_state); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_usb.h b/armlib/at32_sys/drivers/inc/at32f435_437_usb.h new file mode 100644 index 000000000..2e5c0b0d4 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_usb.h @@ -0,0 +1,1422 @@ +/** + ************************************************************************** + * @file at32f435_437_usb.h + * @brief at32f435_437 usb header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_USB_H +#define __AT32F435_437_USB_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup USB + * @{ + */ + +/** @defgroup USB_global_interrupts_definition + * @brief usb global interrupt mask + * @{ + */ + +#define USB_OTG_MODEMIS_INT ((uint32_t)0x00000002) /*!< usb otg mode mismatch interrupt */ +#define USB_OTG_OTGINT_INT ((uint32_t)0x00000004) /*!< usb otg interrupt */ +#define USB_OTG_SOF_INT ((uint32_t)0x00000008) /*!< usb otg sof interrupt */ +#define USB_OTG_RXFLVL_INT ((uint32_t)0x00000010) /*!< usb otg receive fifo non-empty interrupt */ +#define USB_OTG_NPTXFEMP_INT ((uint32_t)0x00000020) /*!< usb otg non-periodic tx fifo empty interrupt */ +#define USB_OTG_GINNAKEFF_INT ((uint32_t)0x00000040) /*!< usb otg global non-periodic in nak effective interrupt */ +#define USB_OTG_GOUTNAKEFF_INT ((uint32_t)0x00000080) /*!< usb otg global out nak effective interrupt */ +#define USB_OTG_ERLYSUSP_INT ((uint32_t)0x00000400) /*!< usb otg early suspend interrupt */ +#define USB_OTG_USBSUSP_INT ((uint32_t)0x00000800) /*!< usb otg suspend interrupt */ +#define USB_OTG_USBRST_INT ((uint32_t)0x00001000) /*!< usb otg reset interrupt */ +#define USB_OTG_ENUMDONE_INT ((uint32_t)0x00002000) /*!< usb otg enumeration done interrupt */ +#define USB_OTG_ISOOUTDROP_INT ((uint32_t)0x00004000) /*!< usb otg isochronous out packet dropped interrut */ +#define USB_OTG_EOPF_INT ((uint32_t)0x00008000) /*!< usb otg eop interrupt */ +#define USB_OTG_IEPT_INT ((uint32_t)0x00040000) /*!< usb otg in endpoint interrupt */ +#define USB_OTG_OEPT_INT ((uint32_t)0x00080000) /*!< usb otg out endpoint interrupt */ +#define USB_OTG_INCOMISOIN_INT ((uint32_t)0x00100000) /*!< usb otg incomplete isochronous in transfer interrupt */ +#define USB_OTG_INCOMPIP_INCOMPISOOUT_INT ((uint32_t)0x00200000) /*!< usb otg incomplete periodic transfer/isochronous out interrupt */ +#define USB_OTG_PRT_INT ((uint32_t)0x01000000) /*!< usb otg host port interrupt */ +#define USB_OTG_HCH_INT ((uint32_t)0x02000000) /*!< usb otg host channel interrupt */ +#define USB_OTG_PTXFEMP_INT ((uint32_t)0x04000000) /*!< usb otg periodic txfifo empty interrupt */ +#define USB_OTG_CONIDSCHG_INT ((uint32_t)0x10000000) /*!< usb otg connector id status change interrupt */ +#define USB_OTG_DISCON_INT ((uint32_t)0x20000000) /*!< usb otg disconnect detected interrupt */ +#define USB_OTG_WKUP_INT ((uint32_t)0x80000000) /*!< usb otg wakeup interrupt */ + +/** + * @} + */ + +/** @defgroup USB_global_interrupt_flags_definition + * @brief usb global interrupt flag + * @{ + */ + +#define USB_OTG_CURMODE ((uint32_t)0x00000001) /*!< usb otg current mode */ +#define USB_OTG_MODEMIS_FLAG ((uint32_t)0x00000002) /*!< usb otg mode mismatch flag */ +#define USB_OTG_OTGINT_FLAG ((uint32_t)0x00000004) /*!< usb otg flag */ +#define USB_OTG_SOF_FLAG ((uint32_t)0x00000008) /*!< usb otg sof flag */ +#define USB_OTG_RXFLVL_FLAG ((uint32_t)0x00000010) /*!< usb otg receive fifo non-empty flag */ +#define USB_OTG_NPTXFEMP_FLAG ((uint32_t)0x00000020) /*!< usb otg non-periodic tx fifo empty flag */ +#define USB_OTG_GINNAKEFF_FLAG ((uint32_t)0x00000040) /*!< usb otg global non-periodic in nak effective flag */ +#define USB_OTG_GOUTNAKEFF_FLAG ((uint32_t)0x00000080) /*!< usb otg global out nak effective flag */ +#define USB_OTG_ERLYSUSP_FLAG ((uint32_t)0x00000400) /*!< usb otg early suspend flag */ +#define USB_OTG_USBSUSP_FLAG ((uint32_t)0x00000800) /*!< usb otg suspend flag */ +#define USB_OTG_USBRST_FLAG ((uint32_t)0x00001000) /*!< usb otg reset flag */ +#define USB_OTG_ENUMDONE_FLAG ((uint32_t)0x00002000) /*!< usb otg enumeration done flag */ +#define USB_OTG_ISOOUTDROP_FLAG ((uint32_t)0x00004000) /*!< usb otg isochronous out packet dropped flag */ +#define USB_OTG_EOPF_FLAG ((uint32_t)0x00008000) /*!< usb otg eop flag */ +#define USB_OTG_IEPT_FLAG ((uint32_t)0x00040000) /*!< usb otg in endpoint flag */ +#define USB_OTG_OEPT_FLAG ((uint32_t)0x00080000) /*!< usb otg out endpoint flag */ +#define USB_OTG_INCOMISOIN_FLAG ((uint32_t)0x00100000) /*!< usb otg incomplete isochronous in transfer flag */ +#define USB_OTG_INCOMPIP_INCOMPISOOUT_FLAG ((uint32_t)0x00200000) /*!< usb otg incomplete periodic transfer/isochronous out flag */ +#define USB_OTG_PRT_FLAG ((uint32_t)0x01000000) /*!< usb otg host port flag */ +#define USB_OTG_HCH_FLAG ((uint32_t)0x02000000) /*!< usb otg host channel flag */ +#define USB_OTG_PTXFEMP_FLAG ((uint32_t)0x04000000) /*!< usb otg periodic txfifo empty flag */ +#define USB_OTG_CONIDSCHG_FLAG ((uint32_t)0x10000000) /*!< usb otg connector id status change flag */ +#define USB_OTG_DISCON_FLAG ((uint32_t)0x20000000) /*!< usb otg disconnect detected flag */ +#define USB_OTG_WKUP_FLAG ((uint32_t)0x80000000) /*!< usb otg wakeup flag */ + +/** + * @} + */ + + +/** @defgroup USB_global_setting_definition + * @brief usb global setting + * @{ + */ + +/** + * @brief usb turnaround time + */ +#define USB_TRDTIM_8 0x9 /*!< usb turn around time 8 */ +#define USB_TRDTIM_16 0x5 /*!< usb turn around time 16 */ + +/** + * @brief usb receive status + */ +#define USB_OTG_GRXSTSP_EPTNUM ((uint32_t)0x0000000F) /*!< usb device receive packet endpoint number*/ +#define USB_OTG_GRXSTSP_CHNUM ((uint32_t)0x0000000F) /*!< usb host receive packet channel number*/ +#define USB_OTG_GRXSTSP_BCNT ((uint32_t)0x00007FF0) /*!< usb receive packet byte count */ +#define USB_OTG_GRXSTSP_DPID ((uint32_t)0x00018000) /*!< usb receive packet pid */ +#define USB_OTG_GRXSTSP_PKTSTS ((uint32_t)0x001E0000) /*!< usb receive packet status */ + +/** + * @brief usb host packet status + */ +#define PKTSTS_IN_DATA_PACKET_RECV 0x2 /*!< usb host in data packet received */ +#define PKTSTS_IN_TRANSFER_COMPLETE 0x3 /*!< usb host in transfer completed */ +#define PKTSTS_DATA_BIT_ERROR 0x5 /*!< usb host data toggle error */ +#define PKTSTS_CHANNEL_STOP 0x7 /*!< usb host channel halted */ + +/** + * @brief usb device packet status + */ +#define USB_OUT_STS_NAK 0x1 /*!< usb device global out nak */ +#define USB_OUT_STS_DATA 0x2 /*!< usb device out data packet received */ +#define USB_OUT_STS_COMP 0x3 /*!< usb device out transfer completed */ +#define USB_SETUP_STS_COMP 0x4 /*!< usb device setup transcation completed */ +#define USB_SETUP_STS_DATA 0x6 /*!< usb device setup data packet received */ + +/** + * @} + */ + +/** @defgroup USB_host_config_definition + * @{ + */ + +/** + * @brief usb host phy clock + */ +#define USB_HCFG_CLK_60M 0 /*!< usb host phy clock 60mhz */ +#define USB_HCFG_CLK_48M 1 /*!< usb host phy clock 48mhz */ +#define USB_HCFG_CLK_6M 2 /*!< usb host phy clock 6mhz */ + +/** + * @brief usb host port status + */ +#define USB_OTG_HPRT_PRTCONSTS ((uint32_t)0x00000001) /*!< usb host port connect status */ +#define USB_OTG_HPRT_PRTCONDET ((uint32_t)0x00000002) /*!< usb host port connect detected */ +#define USB_OTG_HPRT_PRTENA ((uint32_t)0x00000004) /*!< usb host port enable */ +#define USB_OTG_HPRT_PRTENCHNG ((uint32_t)0x00000008) /*!< usb host port enable/disable change */ +#define USB_OTG_HPRT_PRTOVRCACT ((uint32_t)0x00000010) /*!< usb host port overcurrent active */ +#define USB_OTG_HPRT_PRTOVRCCHNG ((uint32_t)0x00000020) /*!< usb host port overcurrent change */ +#define USB_OTG_HPRT_PRTRES ((uint32_t)0x00000040) /*!< usb host port resume */ +#define USB_OTG_HPRT_PRTSUSP ((uint32_t)0x00000080) /*!< usb host port suspend */ +#define USB_OTG_HPRT_PRTRST ((uint32_t)0x00000100) /*!< usb host port reset */ +#define USB_OTG_HPRT_PRTLNSTS ((uint32_t)0x00000C00) /*!< usb host port line status */ +#define USB_OTG_HPRT_PRTPWR ((uint32_t)0x00001000) /*!< usb host port power */ +#define USB_OTG_HPRT_PRTSPD ((uint32_t)0x00060000) /*!< usb host port speed */ + +/** + * @brief usb port speed + */ +#define USB_PRTSPD_HIGH_SPEED 0 /*!< usb host port high speed */ +#define USB_PRTSPD_FULL_SPEED 1 /*!< usb host port full speed */ +#define USB_PRTSPD_LOW_SPEED 2 /*!< usb host port low speed */ + +/** + * @brief usb host register hcchar bit define + */ +#define USB_OTG_HCCHAR_MPS ((uint32_t)0x000007FF) /*!< channel maximum packet size */ +#define USB_OTG_HCCHAR_EPTNUM ((uint32_t)0x00007800) /*!< endpoint number */ +#define USB_OTG_HCCHAR_EPTDIR ((uint32_t)0x00008000) /*!< endpoint direction */ +#define USB_OTG_HCCHAR_LSPDDEV ((uint32_t)0x00020000) /*!< low speed device */ +#define USB_OTG_HCCHAR_EPTYPE ((uint32_t)0x000C0000) /*!< endpoint type */ +#define USB_OTG_HCCHAR_MC ((uint32_t)0x00300000) /*!< multi count */ +#define USB_OTG_HCCHAR_DEVADDR ((uint32_t)0x1FC00000) /*!< device address */ +#define USB_OTG_HCCHAR_ODDFRM ((uint32_t)0x20000000) /*!< odd frame */ +#define USB_OTG_HCCHAR_CHDIS ((uint32_t)0x40000000) /*!< channel disable */ +#define USB_OTG_HCCHAR_CHENA ((uint32_t)0x80000000) /*!< channel enable */ + +/** + * @brief usb host register hctsiz bit define + */ +#define USB_OTG_HCTSIZ_XFERSIZE ((uint32_t)0x0007FFFF) /*!< channel transfer size */ +#define USB_OTG_HCTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< channel packet count */ +#define USB_OTG_HCTSIZ_PID ((uint32_t)0x60000000) /*!< channel pid */ + +/** + * @brief usb host channel interrupt mask + */ +#define USB_OTG_HC_XFERCM_INT ((uint32_t)0x00000001) /*!< channel transfer complete interrupt */ +#define USB_OTG_HC_CHHLTDM_INT ((uint32_t)0x00000002) /*!< channel halted interrupt */ +#define USB_OTG_HC_STALLM_INT ((uint32_t)0x00000008) /*!< channel stall interrupt */ +#define USB_OTG_HC_NAKM_INT ((uint32_t)0x00000010) /*!< channel nak interrupt */ +#define USB_OTG_HC_ACKM_INT ((uint32_t)0x00000020) /*!< channel ack interrupt */ +#define USB_OTG_HC_NYETM_INT ((uint32_t)0x00000040) /*!< channel nyet interrupt */ +#define USB_OTG_HC_XACTERRM_INT ((uint32_t)0x00000080) /*!< channel transaction error interrupt */ +#define USB_OTG_HC_BBLERRM_INT ((uint32_t)0x00000100) /*!< channel babble error interrupt */ +#define USB_OTG_HC_FRMOVRRUN_INT ((uint32_t)0x00000200) /*!< channel frame overrun interrupt */ +#define USB_OTG_HC_DTGLERRM_INT ((uint32_t)0x00000400) /*!< channel data toggle interrupt */ + +/** + * @brief usb host channel interrupt flag + */ +#define USB_OTG_HC_XFERC_FLAG ((uint32_t)0x00000001) /*!< channel transfer complete flag */ +#define USB_OTG_HC_CHHLTD_FLAG ((uint32_t)0x00000002) /*!< channel halted flag */ +#define USB_OTG_HC_STALL_FLAG ((uint32_t)0x00000008) /*!< channel stall flag */ +#define USB_OTG_HC_NAK_FLAG ((uint32_t)0x00000010) /*!< channel nak flag */ +#define USB_OTG_HC_ACK_FLAG ((uint32_t)0x00000020) /*!< channel ack flag */ +#define USB_OTG_HC_NYET_FLAG ((uint32_t)0x00000040) /*!< channel nyet flag */ +#define USB_OTG_HC_XACTERR_FLAG ((uint32_t)0x00000080) /*!< channel transaction error flag */ +#define USB_OTG_HC_BBLERR_FLAG ((uint32_t)0x00000100) /*!< channel babble error flag */ +#define USB_OTG_HC_FRMOVRRUN_FLAG ((uint32_t)0x00000200) /*!< channel frame overrun flag */ +#define USB_OTG_HC_DTGLERR_FLAG ((uint32_t)0x00000400) /*!< channel data toggle flag */ + +/** + * @} + */ + + +/** @defgroup USB_device_config_definition + * @{ + */ +/** + * @brief usb device periodic frame interval + */ +typedef enum +{ + DCFG_PERFRINT_80 = 0x00, /*!< periodic frame interval 80% */ + DCFG_PERFRINT_85 = 0x01, /*!< periodic frame interval 85% */ + DCFG_PERFRINT_90 = 0x02, /*!< periodic frame interval 90% */ + DCFG_PERFRINT_95 = 0x03 /*!< periodic frame interval 95% */ +} dcfg_perfrint_type; + + +/** + * @brief usb device full speed + */ +#define USB_DCFG_FULL_SPEED 3 /*!< device full speed */ + +/** + * @brief usb device ctrl define + */ +#define USB_OTG_DCTL_RWKUPSIG ((uint32_t)0x00000001) /*!< usb device remote wakeup signaling */ +#define USB_OTG_DCTL_SFTDISCON ((uint32_t)0x00000002) /*!< usb device soft disconnect */ +#define USB_OTG_DCTL_GNPINNAKSTS ((uint32_t)0x00000004) /*!< usb device global non-periodic in nak status */ +#define USB_OTG_DCTL_GOUTNAKSTS ((uint32_t)0x00000008) /*!< usb device global out nak status */ +#define USB_OTG_DCTL_SGNPINNAK ((uint32_t)0x00000080) /*!< usb device set global non-periodic in nak */ +#define USB_OTG_DCTL_CGNPINNAK ((uint32_t)0x00000100) /*!< usb device clear global non-periodic in nak */ +#define USB_OTG_DCTL_SGOUTNAK ((uint32_t)0x00000200) /*!< usb device set global out nak status */ +#define USB_OTG_DCTL_CGOUTNAK ((uint32_t)0x00000400) /*!< usb device clear global out nak status */ +#define USB_OTG_DCTL_PWROPRGDNE ((uint32_t)0x00000800) /*!< usb device power on programming done */ + +/** + * @brief usb device in endpoint flag + */ +#define USB_OTG_DIEPINT_XFERC_FLAG ((uint32_t)0x00000001) /*!< usb device in transfer completed flag */ +#define USB_OTG_DIEPINT_EPTDISD_FLAG ((uint32_t)0x00000002) /*!< usb device endpoint disable flag */ +#define USB_OTG_DIEPINT_TIMEOUT_FLAG ((uint32_t)0x00000008) /*!< usb device in timeout */ +#define USB_OTG_DIEPINT_INTKNTXFEMP_FLAG ((uint32_t)0x00000010) /*!< usb device in token received when tx fifo is empty flag */ +#define USB_OTG_DIEPINT_INEPTNAK_FLAG ((uint32_t)0x00000040) /*!< usb device in endpoint nak effective flag */ +#define USB_OTG_DIEPINT_TXFEMP_FLAG ((uint32_t)0x00000080) /*!< usb device transmit fifo empty flag */ + +/** + * @brief usb device out endpoint flag + */ +#define USB_OTG_DOEPINT_XFERC_FLAG ((uint32_t)0x00000001) /*!< usb device out transfer completed flag */ +#define USB_OTG_DOEPINT_EPTDISD_FLAG ((uint32_t)0x00000002) /*!< usb device endpoint disable flag */ +#define USB_OTG_DOEPINT_SETUP_FLAG ((uint32_t)0x00000008) /*!< usb device setup flag */ +#define USB_OTG_DOEPINT_OUTTEPD_FLAG ((uint32_t)0x00000010) /*!< usb device out token recevied when endpoint disable flag */ +#define USB_OTG_DOEPINT_B2BSTUP_FLAG ((uint32_t)0x00000040) /*!< back-to-back setup packets received */ + +/** + * @brief usb device in endpoint fifo space mask + */ +#define USB_OTG_DTXFSTS_INEPTFSAV ((uint32_t)0x0000FFFF) /*!< usb device in endpoint tx fifo space avail */ + +/** + * @brief endpoint0 maximum packet size + */ +#define USB_EPT0_MPS_64 0 /*!< usb device endpoint 0 maximum packet size 64byte */ +#define USB_EPT0_MPS_32 1 /*!< usb device endpoint 0 maximum packet size 32byte */ +#define USB_EPT0_MPS_16 2 /*!< usb device endpoint 0 maximum packet size 16byte */ +#define USB_EPT0_MPS_8 3 /*!< usb device endpoint 0 maximum packet size 8byte */ + +/** + * @} + */ + +/** + * @brief otg fifo size (word) + */ +#define OTG_FIFO_SIZE 320 /*!< otg usb total fifo size */ + +/** + * @brief otg host max buffer length (byte) + */ +#define USB_MAX_DATA_LENGTH 0x200 /*!< usb host maximum buffer size */ + +#define OTGFS_USB_GLOBAL +#define OTGFS_USB_DEVICE +#define OTGFS_USB_HOST + +/** @defgroup USB_exported_enum_types + * @{ + */ + +/** + * @brief usb mode define(device, host, drd) + */ +typedef enum +{ + OTG_DEVICE_MODE, /*!< usb device mode */ + OTG_HOST_MODE, /*!< usb host mode */ + OTG_DRD_MODE /*!< usb drd mode */ +} otg_mode_type; + +/** + * @brief endpoint type define + */ +typedef enum +{ + EPT_CONTROL_TYPE = 0x00, /*!< usb endpoint type control */ + EPT_ISO_TYPE = 0x01, /*!< usb endpoint type iso */ + EPT_BULK_TYPE = 0x02, /*!< usb endpoint type bulk */ + EPT_INT_TYPE = 0x03 /*!< usb endpoint type interrupt */ +} endpoint_trans_type; + +/** + * @brief usb endpoint number define type + */ +typedef enum +{ + USB_EPT0 = 0x00, /*!< usb endpoint 0 */ + USB_EPT1 = 0x01, /*!< usb endpoint 1 */ + USB_EPT2 = 0x02, /*!< usb endpoint 2 */ + USB_EPT3 = 0x03, /*!< usb endpoint 3 */ + USB_EPT4 = 0x04, /*!< usb endpoint 4 */ + USB_EPT5 = 0x05, /*!< usb endpoint 5 */ + USB_EPT6 = 0x06, /*!< usb endpoint 6 */ + USB_EPT7 = 0x07 /*!< usb endpoint 7 */ +} usb_endpoint_number_type; + +/** + * @brief usb endpoint max num define + */ +#ifndef USB_EPT_MAX_NUM +#define USB_EPT_MAX_NUM 8 /*!< usb device support endpoint number */ +#endif +/** + * @brief usb channel max num define + */ +#ifndef USB_HOST_CHANNEL_NUM +#define USB_HOST_CHANNEL_NUM 16 /*!< usb host support channel number */ +#endif + +/** + * @brief endpoint trans dir type + */ +typedef enum +{ + EPT_DIR_IN = 0x00, /*!< usb transfer direction in */ + EPT_DIR_OUT = 0x01 /*!< usb transfer direction out */ +} endpoint_dir_type; + +/** + * @brief otgfs1 and otgfs2 select type + */ +typedef enum +{ + USB_OTG1_ID, /*!< usb otg 1 id */ + USB_OTG2_ID /*!< usb otg 2 id */ +} otg_id_type; + +/** + * @brief usb clock select + */ +typedef enum +{ + USB_CLK_HICK, /*!< usb clock use hick */ + USB_CLK_HEXT /*!< usb clock use hext */ +}usb_clk48_s; + +/** + * @} + */ + + + +/** @defgroup USB_exported_types + * @{ + */ + +/** + * @brief usb endpoint infomation structure definition + */ +typedef struct +{ + uint8_t eptn; /*!< endpoint register number (0~7) */ + uint8_t ept_address; /*!< endpoint address */ + uint8_t inout; /*!< endpoint dir EPT_DIR_IN or EPT_DIR_OUT */ + uint8_t trans_type; /*!< endpoint type: + EPT_CONTROL_TYPE, EPT_BULK_TYPE, EPT_INT_TYPE, EPT_ISO_TYPE*/ + uint16_t tx_addr; /*!< endpoint tx buffer offset address */ + uint16_t rx_addr; /*!< endpoint rx buffer offset address */ + uint32_t maxpacket; /*!< endpoint max packet*/ + uint8_t is_double_buffer; /*!< endpoint double buffer flag */ + uint8_t stall; /*!< endpoint is stall state */ + uint32_t status; + + /* transmission buffer and count */ + uint8_t *trans_buf; /*!< endpoint transmission buffer */ + uint32_t total_len; /*!< endpoint transmission lengtg */ + uint32_t trans_len; /*!< endpoint transmission length*/ + + uint32_t last_len; /*!< last transfer length */ + uint32_t rem0_len; /*!< rem transfer length */ + uint32_t ept0_slen; /*!< endpoint 0 transfer sum length */ +} usb_ept_info; + + +/** + * @brief usb host channel infomation structure definition + */ +typedef struct +{ + uint8_t ch_num; /*!< host channel number */ + uint8_t address; /*!< device address */ + uint8_t dir; /*!< transmission direction */ + uint8_t ept_num; /*!< device endpoint number */ + uint8_t ept_type; /*!< channel transmission type */ + uint32_t maxpacket; /*!< support max packet size */ + uint8_t data_pid; /*!< data pid */ + uint8_t speed; /*!< usb speed */ + uint8_t stall; /*!< channel stall flag */ + uint32_t status; /*!< channel status */ + uint32_t state; /*!< channel state */ + uint32_t urb_sts; /*!< usb channel request block state */ + + uint8_t toggle_in; /*!< channel in transfer toggle */ + uint8_t toggle_out; /*!< channel out transfer toggle */ + + /* transmission buffer and count */ + uint8_t *trans_buf; /* host channel buffer */ + uint32_t trans_len; /* host channel transmission len */ + uint32_t trans_count; /* host channel transmission count*/ +} usb_hch_type; + + +typedef struct +{ + /** + * @brief otgfs control and status register, offset:0x00 + */ + union + { + __IO uint32_t gotgctrl; + struct + { + __IO uint32_t reserved1 : 16; /* [15:0] */ + __IO uint32_t cidsts : 1; /* [16] */ + __IO uint32_t reserved2 : 4; /* [20:17] */ + __IO uint32_t curmod : 1; /* [21] */ + __IO uint32_t reserved3 : 10; /* [31:22] */ + } gotgctrl_bit; + }; + + /** + * @brief otgfs interrupt register, offset:0x04 + */ + union + { + __IO uint32_t gotgint; + struct + { + __IO uint32_t reserved1 : 2; /* [1:0] */ + __IO uint32_t sesenddet : 1; /* [2] */ + __IO uint32_t reserved2 : 29; /* [31:3] */ + + } gotgint_bit; + }; + + /** + * @brief otgfs gahbcfg configuration register, offset:0x08 + */ + union + { + __IO uint32_t gahbcfg; + struct + { + __IO uint32_t glbintmsk : 1; /* [0] */ + __IO uint32_t reserved1 : 6; /* [6:1] */ + __IO uint32_t nptxfemplvl : 1; /* [7] */ + __IO uint32_t ptxfemplvl : 1; /* [8] */ + __IO uint32_t reserved2 : 23; /* [31:9] */ + } gahbcfg_bit; + }; + + /** + * @brief otgfs usb configuration register, offset:0x0C + */ + union + { + __IO uint32_t gusbcfg; + struct + { + __IO uint32_t toutcal : 3; /* [2:0] */ + __IO uint32_t reserved1 : 7; /* [9:3] */ + __IO uint32_t usbtrdtim : 4; /* [13:10] */ + __IO uint32_t reserved2 : 15; /* [28:14] */ + __IO uint32_t fhstmode : 1; /* [29] */ + __IO uint32_t fdevmode : 1; /* [30] */ + __IO uint32_t cotxpkt : 1; /* [31] */ + } gusbcfg_bit; + }; + + /** + * @brief otgfs reset register, offset:0x10 + */ + union + { + __IO uint32_t grstctl; + struct + { + __IO uint32_t csftrst : 1; /* [0] */ + __IO uint32_t piusftrst : 1; /* [1] */ + __IO uint32_t frmcntrst : 1; /* [2] */ + __IO uint32_t reserved1 : 1; /* [3] */ + __IO uint32_t rxfflsh : 1; /* [4] */ + __IO uint32_t txfflsh : 1; /* [5] */ + __IO uint32_t txfnum : 5; /* [10:6] */ + __IO uint32_t reserved2 : 20; /* [30:11] */ + __IO uint32_t ahbidle : 1; /* [31] */ + } grstctl_bit; + }; + + /** + * @brief otgfs core interrupt register, offset:0x14 + */ + union + { + __IO uint32_t gintsts; + struct + { + __IO uint32_t curmode : 1; /* [0] */ + __IO uint32_t modemis : 1; /* [1] */ + __IO uint32_t otgint : 1; /* [2] */ + __IO uint32_t sof : 1; /* [3] */ + __IO uint32_t rxflvl : 1; /* [4] */ + __IO uint32_t nptxfemp : 1; /* [5] */ + __IO uint32_t ginnakeff : 1; /* [6] */ + __IO uint32_t goutnakeff : 1; /* [7] */ + __IO uint32_t reserved1 : 2; /* [9:8]] */ + __IO uint32_t erlysusp : 1; /* [10] */ + __IO uint32_t usbsusp : 1; /* [11] */ + __IO uint32_t usbrst : 1; /* [12] */ + __IO uint32_t enumdone : 1; /* [13] */ + __IO uint32_t isooutdrop : 1; /* [14] */ + __IO uint32_t eopf : 1; /* [15] */ + __IO uint32_t reserved2 : 2; /* [17:16]] */ + __IO uint32_t ieptint : 1; /* [18] */ + __IO uint32_t oeptint : 1; /* [19] */ + __IO uint32_t incompisoin : 1; /* [20] */ + __IO uint32_t incompip_incompisoout : 1; /* [21] */ + __IO uint32_t reserved3 : 2; /* [23:22] */ + __IO uint32_t prtint : 1; /* [24] */ + __IO uint32_t hchint : 1; /* [25] */ + __IO uint32_t ptxfemp : 1; /* [26] */ + __IO uint32_t reserved4 : 1; /* [27] */ + __IO uint32_t conidschg : 1; /* [28] */ + __IO uint32_t disconint : 1; /* [29] */ + __IO uint32_t reserved5 : 1; /* [30] */ + __IO uint32_t wkupint : 1; /* [31] */ + } gintsts_bit; + }; + + /** + * @brief otgfs interrupt mask register, offset:0x18 + */ + union + { + __IO uint32_t gintmsk; + struct + { + __IO uint32_t reserved1 : 1; /* [0] */ + __IO uint32_t modemismsk : 1; /* [1] */ + __IO uint32_t otgintmsk : 1; /* [2] */ + __IO uint32_t sofmsk : 1; /* [3] */ + __IO uint32_t rxflvlmsk : 1; /* [4] */ + __IO uint32_t nptxfempmsk : 1; /* [5] */ + __IO uint32_t ginnakeffmsk : 1; /* [6] */ + __IO uint32_t goutnakeffmsk : 1; /* [7] */ + __IO uint32_t reserved2 : 2; /* [9:8]] */ + __IO uint32_t erlysuspmsk : 1; /* [10] */ + __IO uint32_t usbsuspmsk : 1; /* [11] */ + __IO uint32_t usbrstmsk : 1; /* [12] */ + __IO uint32_t enumdonemsk : 1; /* [13] */ + __IO uint32_t isooutdropmsk : 1; /* [14] */ + __IO uint32_t eopfmsk : 1; /* [15] */ + __IO uint32_t reserved3 : 2; /* [17:16]] */ + __IO uint32_t ieptintmsk : 1; /* [18] */ + __IO uint32_t oeptintmsk : 1; /* [19] */ + __IO uint32_t incompisoinmsk : 1; /* [20] */ + __IO uint32_t incompip_incompisooutmsk : 1; /* [21] */ + __IO uint32_t reserved4 : 2; /* [23:22] */ + __IO uint32_t prtintmsk : 1; /* [24] */ + __IO uint32_t hchintmsk : 1; /* [25] */ + __IO uint32_t ptxfempmsk : 1; /* [26] */ + __IO uint32_t reserved5 : 1; /* [27] */ + __IO uint32_t conidschgmsk : 1; /* [28] */ + __IO uint32_t disconintmsk : 1; /* [29] */ + __IO uint32_t reserved6 : 1; /* [30] */ + __IO uint32_t wkupintmsk : 1; /* [31] */ + } gintmsk_bit; + }; + + /** + * @brief otgfs rx status debug read register, offset:0x1C + */ + union + { + __IO uint32_t grxstsr; + struct + { + __IO uint32_t eptnum : 4; /* [3:0] */ + __IO uint32_t bcnt : 11; /* [14:4] */ + __IO uint32_t dpid : 2; /* [16:15] */ + __IO uint32_t pktsts : 4; /* [20:17] */ + __IO uint32_t fn : 4; /* [24:21] */ + __IO uint32_t reserved1 : 7; /* [31:25] */ + } grxstsr_bit; + }; + + /** + * @brief otgfs rx status read and pop register, offset:0x20 + */ + union + { + __IO uint32_t grxstsp; + struct + { + __IO uint32_t chnum : 4; /* [3:0] */ + __IO uint32_t bcnt : 11; /* [14:4] */ + __IO uint32_t dpid : 2; /* [16:15] */ + __IO uint32_t pktsts : 4; /* [20:17] */ + __IO uint32_t reserved1 : 11; /* [31:21] */ + } grxstsp_bit; + }; + + /** + * @brief otgfs rx fifo size register, offset:0x24 + */ + union + { + __IO uint32_t grxfsiz; + struct + { + __IO uint32_t rxfdep : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } grxfsiz_bit; + }; + + /** + * @brief otgfs non-periodic and ept0 tx fifo size register, offset:0x28 + */ + union + { + __IO uint32_t gnptxfsiz_ept0tx; + struct + { + __IO uint32_t nptxfstaddr : 16; /* [15:0] */ + __IO uint32_t nptxfdep : 16; /* [31:16] */ + } gnptxfsiz_ept0tx_bit; + }; + + /** + * @brief otgfs non-periodic tx fifo request queue status register, offset:0x2C + */ + union + { + __IO uint32_t gnptxsts; + struct + { + __IO uint32_t nptxfspcavail : 16; /* [15:0] */ + __IO uint32_t nptxqspcavail : 8; /* [23:16] */ + __IO uint32_t nptxqtop : 7; /* [30:24] */ + __IO uint32_t reserved1 : 1; /* [31] */ + } gnptxsts_bit; + }; + + __IO uint32_t reserved2[2]; + + /** + * @brief otgfs general core configuration register, offset:0x38 + */ + union + { + __IO uint32_t gccfg; + struct + { + __IO uint32_t reserved1 : 16; /* [15:0] */ + __IO uint32_t pwrdown : 1; /* [16] */ + __IO uint32_t lp_mode : 1; /* [17] */ + __IO uint32_t reserved2 : 2; /* [19:18] */ + __IO uint32_t sofouten : 1; /* [20] */ + __IO uint32_t vbusig : 1; /* [21] */ + __IO uint32_t reserved3 : 10; /* [31:22] */ + } gccfg_bit; + }; + + /** + * @brief otgfs core id register, offset:0x3C + */ + union + { + __IO uint32_t guid; + struct + { + __IO uint32_t userid : 32; /* [31:0] */ + } guid_bit; + }; + + __IO uint32_t reserved3[48]; + + /** + * @brief otgfs host periodic tx fifo size register, offset:0x100 + */ + union + { + __IO uint32_t hptxfsiz; + struct + { + __IO uint32_t ptxfstaddr : 16; /* [15:0] */ + __IO uint32_t ptxfsize : 16; /* [31:16] */ + } hptxfsiz_bit; + }; + + /** + * @brief otgfs host periodic tx fifo size register, offset:0x100 + */ + union + { + __IO uint32_t dieptxfn[7]; + struct + { + __IO uint32_t ineptxfstaddr : 16; /* [15:0] */ + __IO uint32_t ineptxfdep : 16; /* [31:16] */ + } dieptxfn_bit[7]; + }; +} otg_global_type; + + +typedef struct +{ + /** + * @brief otgfs host mode configuration register, offset:0x400 + */ + union + { + __IO uint32_t hcfg; + struct + { + __IO uint32_t fslspclksel : 2; /* [1:0] */ + __IO uint32_t fslssupp : 1; /* [2] */ + __IO uint32_t reserved1 : 29; /* [31:3] */ + } hcfg_bit; + }; + + /** + * @brief otgfs host frame interval register, offset:0x404 + */ + union + { + __IO uint32_t hfir; + struct + { + __IO uint32_t frint : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:15] */ + } hfir_bit; + }; + + /** + * @brief otgfs host frame number and time remaining register, offset:0x408 + */ + union + { + __IO uint32_t hfnum; + struct + { + __IO uint32_t frnum : 16; /* [15:0] */ + __IO uint32_t ftrem : 16; /* [31:15] */ + } hfnum_bit; + }; + + __IO uint32_t reserved1; + + /** + * @brief otgfs host periodic tx fifo request queue register, offset:0x410 + */ + union + { + __IO uint32_t hptxsts; + struct + { + __IO uint32_t ptxfspcavil : 16; /* [15:0] */ + __IO uint32_t ptxqspcavil : 8; /* [23:16] */ + __IO uint32_t ptxqtop : 8; /* [31:24] */ + } hptxsts_bit; + }; + + /** + * @brief otgfs host all channel interrupt register, offset:0x414 + */ + union + { + __IO uint32_t haint; + struct + { + __IO uint32_t haint : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [32:16] */ + } haint_bit; + }; + + /** + * @brief otgfs host all channel interrupt mask register, offset:0x418 + */ + union + { + __IO uint32_t haintmsk; + struct + { + __IO uint32_t haintmsk : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [32:16] */ + } haintmsk_bit; + }; + + __IO uint32_t reserved2[9]; + + /** + * @brief otgfs host port control and status register, offset:0x440 + */ + union + { + __IO uint32_t hprt; + struct + { + __IO uint32_t prtconsts : 1; /* [0] */ + __IO uint32_t prtcondet : 1; /* [1] */ + __IO uint32_t prtena : 1; /* [2] */ + __IO uint32_t prtenchng : 1; /* [3] */ + __IO uint32_t prtovrcact : 1; /* [4] */ + __IO uint32_t prtovrcchng : 1; /* [5] */ + __IO uint32_t prtres : 1; /* [6] */ + __IO uint32_t prtsusp : 1; /* [7] */ + __IO uint32_t prtrst : 1; /* [8] */ + __IO uint32_t reserved1 : 1; /* [9] */ + __IO uint32_t prtlnsts : 2; /* [11:10] */ + __IO uint32_t prtpwr : 1; /* [12] */ + __IO uint32_t prttsctl : 4; /* [16:13] */ + __IO uint32_t prtspd : 2; /* [18:17] */ + __IO uint32_t reserved2 : 13; /* [31:19] */ + + } hprt_bit; + }; +} otg_host_type; + +typedef struct +{ + /** + * @brief otgfs host channel x characterisic register, offset:0x500 + */ + union + { + __IO uint32_t hcchar; + struct + { + __IO uint32_t mps : 11; /* [10:0] */ + __IO uint32_t eptnum : 4; /* [14:11] */ + __IO uint32_t eptdir : 1; /* [15] */ + __IO uint32_t reserved1 : 1; /* [16] */ + __IO uint32_t lspddev : 1; /* [17] */ + __IO uint32_t eptype : 2; /* [19:18] */ + __IO uint32_t mc : 2; /* [21:20] */ + __IO uint32_t devaddr : 7; /* [28:22] */ + __IO uint32_t oddfrm : 1; /* [29] */ + __IO uint32_t chdis : 1; /* [30] */ + __IO uint32_t chena : 1; /* [31] */ + } hcchar_bit; + }; + + /** + * @brief otgfs host channel split control register, offset:0x504 + */ + union + { + __IO uint32_t hcsplt; + struct + { + __IO uint32_t prtaddr : 7; /* [6:0] */ + __IO uint32_t hubaddr : 7; /* [13:7] */ + __IO uint32_t xactpos : 2; /* [15:14] */ + __IO uint32_t compsplt : 1; /* [16] */ + __IO uint32_t reserved1 : 14; /* [30:17] */ + __IO uint32_t spltena : 1; /* [31] */ + } hcsplt_bit; + }; + + /** + * @brief otgfs host channel interrupt register, offset:0x508 + */ + union + { + __IO uint32_t hcint; + struct + { + __IO uint32_t xferc : 1; /* [0] */ + __IO uint32_t chhltd : 1; /* [1] */ + __IO uint32_t reserved1 : 1; /* [2] */ + __IO uint32_t stall : 1; /* [3] */ + __IO uint32_t nak : 1; /* [4] */ + __IO uint32_t ack : 1; /* [5] */ + __IO uint32_t reserved2 : 1; /* [6] */ + __IO uint32_t xacterr : 1; /* [7] */ + __IO uint32_t bblerr : 1; /* [8] */ + __IO uint32_t frmovrun : 1; /* [9] */ + __IO uint32_t dtglerr : 1; /* [10] */ + __IO uint32_t reserved3 : 21; /* [31:11] */ + } hcint_bit; + }; + + /** + * @brief otgfs host channel interrupt mask register, offset:0x50C + */ + union + { + __IO uint32_t hcintmsk; + struct + { + __IO uint32_t xfercmsk : 1; /* [0] */ + __IO uint32_t chhltdmsk : 1; /* [1] */ + __IO uint32_t reserved1 : 1; /* [2] */ + __IO uint32_t stallmsk : 1; /* [3] */ + __IO uint32_t nakmsk : 1; /* [4] */ + __IO uint32_t ackmsk : 1; /* [5] */ + __IO uint32_t reserved2 : 1; /* [6] */ + __IO uint32_t xacterrmsk : 1; /* [7] */ + __IO uint32_t bblerrmsk : 1; /* [8] */ + __IO uint32_t frmovrunmsk : 1; /* [9] */ + __IO uint32_t dtglerrmsk : 1; /* [10] */ + __IO uint32_t reserved3 : 21; /* [31:11] */ + } hcintmsk_bit; + }; + + /** + * @brief otgfs host channel transfer size register, offset:0x510 + */ + union + { + __IO uint32_t hctsiz; + struct + { + __IO uint32_t xfersize : 19; /* [18:0] */ + __IO uint32_t pktcnt : 10; /* [28:19] */ + __IO uint32_t pid : 2; /* [30:29] */ + __IO uint32_t reserved1 : 1; /* [31] */ + } hctsiz_bit; + }; + __IO uint32_t reserved3[3]; + +}otg_hchannel_type; + + +typedef struct +{ + /** + * @brief otgfs device configuration register, offset:0x800 + */ + union + { + __IO uint32_t dcfg; + struct + { + __IO uint32_t devspd : 2; /* [1:0] */ + __IO uint32_t nzstsouthshk : 1; /* [2] */ + __IO uint32_t reserved1 : 1; /* [3] */ + __IO uint32_t devaddr : 7; /* [10:4] */ + __IO uint32_t perfrint : 2; /* [12:11] */ + __IO uint32_t reserved2 : 19; /* [31:13] */ + } dcfg_bit; + }; + + /** + * @brief otgfs device controls register, offset:0x804 + */ + union + { + __IO uint32_t dctl; + struct + { + __IO uint32_t rwkupsig : 1; /* [0] */ + __IO uint32_t sftdiscon : 1; /* [1] */ + __IO uint32_t gnpinnaksts : 1; /* [2] */ + __IO uint32_t goutnaksts : 1; /* [3] */ + __IO uint32_t tstctl : 3; /* [6:4] */ + __IO uint32_t sgnpinak : 1; /* [7] */ + __IO uint32_t cgnpinak : 1; /* [8] */ + __IO uint32_t sgoutnak : 1; /* [9] */ + __IO uint32_t cgoutnak : 1; /* [10] */ + __IO uint32_t pwroprgdne : 1; /* [11] */ + __IO uint32_t reserved1 : 20; /* [31:12] */ + } dctl_bit; + }; + + /** + * @brief otgfs device status register, offset:0x80C + */ + union + { + __IO uint32_t dsts; + struct + { + __IO uint32_t suspsts : 1; /* [0] */ + __IO uint32_t enumspd : 2; /* [2:1] */ + __IO uint32_t eticerr : 1; /* [3] */ + __IO uint32_t reserved1 : 4; /* [7:4] */ + __IO uint32_t soffn : 14; /* [21:8] */ + __IO uint32_t reserved2 : 10; /* [31:22] */ + } dsts_bit; + }; + + __IO uint32_t reserved1; + /** + * @brief otgfs device in endpoint general interrupt mask register, offset:0x810 + */ + union + { + __IO uint32_t diepmsk; + struct + { + __IO uint32_t xfercmsk : 1; /* [0] */ + __IO uint32_t eptdismsk : 1; /* [1] */ + __IO uint32_t reserved1 : 1; /* [2] */ + __IO uint32_t timeoutmsk : 1; /* [3] */ + __IO uint32_t intkntxfempmsk : 1; /* [4] */ + __IO uint32_t intkneptmismsk : 1; /* [5] */ + __IO uint32_t ineptnakmsk : 1; /* [6] */ + __IO uint32_t reserved2 : 1; /* [7] */ + __IO uint32_t txfifoudrmsk : 1; /* [8] */ + __IO uint32_t bnainmsk : 1; /* [9] */ + __IO uint32_t reserved3 : 22; /* [31:10] */ + } diepmsk_bit; + }; + + /** + * @brief otgfs device out endpoint general interrupt mask register, offset:0x814 + */ + union + { + __IO uint32_t doepmsk; + struct + { + __IO uint32_t xfercmsk : 1; /* [0] */ + __IO uint32_t eptdismsk : 1; /* [1] */ + __IO uint32_t reserved1 : 1; /* [2] */ + __IO uint32_t setupmsk : 1; /* [3] */ + __IO uint32_t outtepdmsk : 1; /* [4] */ + __IO uint32_t reserved2 : 1; /* [5] */ + __IO uint32_t b2bsetupmsk : 1; /* [6] */ + __IO uint32_t reserved3 : 1; /* [7] */ + __IO uint32_t outperrmsk : 1; /* [8] */ + __IO uint32_t bnaoutmsk : 1; /* [9] */ + __IO uint32_t reserved4 : 22; /* [31:10] */ + } doepmsk_bit; + }; + + /** + * @brief otgfs device all endpoint interrupt register, offset:0x818 + */ + union + { + __IO uint32_t daint; + struct + { + __IO uint32_t ineptint : 16; /* [15:0] */ + __IO uint32_t outeptint : 16; /* [31:16] */ + } daint_bit; + }; + + /** + * @brief otgfs device all endpoint interrupt mask register, offset:0x81C + */ + union + { + __IO uint32_t daintmsk; + struct + { + __IO uint32_t ineptmsk : 16; /* [15:0] */ + __IO uint32_t outeptmsk : 16; /* [31:16] */ + } daintmsk_bit; + }; + + __IO uint32_t reserved2[5]; + + /** + * @brief otgfs device in endpoint fifo empty interrupt mask register, offset:0x834 + */ + union + { + __IO uint32_t diepempmsk; + struct + { + __IO uint32_t ineptxfemsk : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } diepempmsk_bit; + }; + +} otg_device_type; + +typedef struct +{ + /** + * @brief otgfs device out endpoint control register, offset:0x900 + */ + union + { + __IO uint32_t diepctl; + struct + { + __IO uint32_t mps : 11; /* [10:0] */ + __IO uint32_t reserved1 : 4; /* [14:11] */ + __IO uint32_t usbacept : 1; /* [15] */ + __IO uint32_t dpid : 1; /* [16] */ + __IO uint32_t naksts : 1; /* [17] */ + __IO uint32_t eptype : 2; /* [19:18] */ + __IO uint32_t reserved2 : 1; /* [20] */ + __IO uint32_t stall : 1; /* [21] */ + __IO uint32_t txfnum : 4; /* [25:22] */ + __IO uint32_t cnak : 1; /* [26] */ + __IO uint32_t snak : 1; /* [27] */ + __IO uint32_t setd0pid : 1; /* [28] */ + __IO uint32_t setd1pid : 1; /* [29] */ + __IO uint32_t eptdis : 1; /* [30] */ + __IO uint32_t eptena : 1; /* [31] */ + } diepctl_bit; + }; + __IO uint32_t reserved1; + + /** + * @brief otgfs device in endpoint interrupt register, offset:0x908 + */ + union + { + __IO uint32_t diepint; + struct + { + __IO uint32_t xferc : 1; /* [0] */ + __IO uint32_t epdisd : 1; /* [1] */ + __IO uint32_t reserved1 : 1; /* [2] */ + __IO uint32_t timeout : 1; /* [3] */ + __IO uint32_t intkntxfemp : 1; /* [4] */ + __IO uint32_t reserved2 : 1; /* [5] */ + __IO uint32_t ineptnak : 1; /* [6] */ + __IO uint32_t txfemp : 1; /* [7] */ + __IO uint32_t reserved3 : 24; /* [31:8] */ + } diepint_bit; + }; + __IO uint32_t reserved2; + + /** + * @brief otgfs device in endpoint transfer size register, offset:0x910 + endpoint number * 0x20 + */ + union + { + __IO uint32_t dieptsiz; + struct + { + __IO uint32_t xfersize : 19; /* [18:0] */ + __IO uint32_t pktcnt : 10; /* [28:19] */ + __IO uint32_t mc : 2; /* [30:29] */ + __IO uint32_t reserved1 : 1; /* [31] */ + } dieptsiz_bit; + }; + + __IO uint32_t reserved3; + + /** + * @brief otgfs device in endpoint tx fifo status register, offset:0x918 + endpoint number * 0x20 + */ + union + { + __IO uint32_t dtxfsts; + struct + { + __IO uint32_t ineptxfsav : 16; /* [15:0] */ + __IO uint32_t reserved1 : 16; /* [31:16] */ + } dtxfsts_bit; + }; + +} otg_eptin_type; + +typedef struct +{ + /** + * @brief otgfs device out endpoint control register, offset:0xb00 + endpoint number * 0x20 + */ + union + { + __IO uint32_t doepctl; + struct + { + __IO uint32_t mps : 11; /* [10:0] */ + __IO uint32_t reserved1 : 4; /* [14:11] */ + __IO uint32_t usbacept : 1; /* [15] */ + __IO uint32_t dpid : 1; /* [16] */ + __IO uint32_t naksts : 1; /* [17] */ + __IO uint32_t eptype : 2; /* [19:18] */ + __IO uint32_t snpm : 1; /* [20] */ + __IO uint32_t stall : 1; /* [21] */ + __IO uint32_t reserved2 : 4; /* [25:22] */ + __IO uint32_t cnak : 1; /* [26] */ + __IO uint32_t snak : 1; /* [27] */ + __IO uint32_t setd0pid : 1; /* [28] */ + __IO uint32_t setd1pid : 1; /* [29] */ + __IO uint32_t eptdis : 1; /* [30] */ + __IO uint32_t eptena : 1; /* [31] */ + } doepctl_bit; + }; + __IO uint32_t reserved1; + + /** + * @brief otgfs device out endpoint interrupt register, offset:0xb08 + endpoint number * 0x20 + */ + union + { + __IO uint32_t doepint; + struct + { + __IO uint32_t xferc : 1; /* [0] */ + __IO uint32_t epdisd : 1; /* [1] */ + __IO uint32_t reserved1 : 1; /* [2] */ + __IO uint32_t setup : 1; /* [3] */ + __IO uint32_t outtepd : 1; /* [4] */ + __IO uint32_t reserved2 : 1; /* [5] */ + __IO uint32_t b2pstup : 1; /* [6] */ + __IO uint32_t reserved3 : 25; /* [31:7] */ + } doepint_bit; + }; + __IO uint32_t reserved2; + + /** + * @brief otgfs device out endpoint transfer size register, offset:0xb10 + endpoint number * 0x20 + */ + union + { + __IO uint32_t doeptsiz; + struct + { + __IO uint32_t xfersize : 19; /* [18:0] */ + __IO uint32_t pktcnt : 10; /* [28:19] */ + __IO uint32_t rxdpid_setupcnt : 2; /* [30:29] */ + __IO uint32_t reserved1 : 1; /* [31] */ + } doeptsiz_bit; + }; +} otg_eptout_type; + +typedef struct +{ + /** + * @brief otgfs power and clock gating control registers, offset:0xe00 + */ + union + { + __IO uint32_t pcgcctl; + struct + { + __IO uint32_t stoppclk : 1; /* [0] */ + __IO uint32_t reserved1 : 3; /* [3:1] */ + __IO uint32_t suspendm : 1; /* [4] */ + __IO uint32_t reserved2 : 27; /* [31:5] */ + } pcgcctl_bit; + }; +} otg_pcgcctl_type; + +/** + * @} + */ + +/** @defgroup USB_exported_functions + * @{ + */ + +/** + * @brief usb host and device offset address + */ +#define OTG_HOST_ADDR_OFFSET 0x400 /*!< usb host register offset address */ +#define OTG_HOST_CHANNEL_ADDR_OFFSET 0x500 /*!< usb host channel register offset address */ +#define OTG_DEVICE_ADDR_OFFSET 0x800 /*!< usb device register offset address */ +#define OTG_DEVICE_EPTIN_ADDR_OFFSET 0x900 /*!< usb device endpoint in register offset address */ +#define OTG_DEVICE_EPTOUT_ADDR_OFFSET 0xB00 /*!< usb device endpoint out register offset address */ +#define OTG_PCGCCTL_ADDR_OFFSET 0xE00 /*!< usb power and clock control register offset address */ +#define OTG_FIFO_ADDR_OFFSET 0x1000 /*!< usb fifo offset address */ + +/** + * @brief usb host and device register define + */ +#define OTG1_GLOBAL ((otg_global_type *)(OTGFS1_BASE)) /*!< usb otg1 global register */ +#define OTG2_GLOBAL ((otg_global_type *)(OTGFS2_BASE)) /*!< usb otg2 global register */ +#define OTG_PCGCCTL(usbx) ((otg_pcgcctl_type *)((uint32_t)usbx + OTG_PCGCCTL_ADDR_OFFSET)) /*!< usb power and clock control register */ +#define OTG_DEVICE(usbx) ((otg_device_type *)((uint32_t)usbx + OTG_DEVICE_ADDR_OFFSET)) /*!< usb device register */ +#define OTG_HOST(usbx) ((otg_host_type *)((uint32_t)usbx + OTG_HOST_ADDR_OFFSET)) /*!< usb host register */ +#define USB_CHL(usbx, n) ((otg_hchannel_type *)((uint32_t)usbx + OTG_HOST_CHANNEL_ADDR_OFFSET + n * 0x20)) /*!< usb channel n register */ +#define USB_INEPT(usbx, eptn) ((otg_eptin_type *)((uint32_t)usbx + OTG_DEVICE_EPTIN_ADDR_OFFSET + eptn * 0x20)) /*!< usb device endpoint in register */ +#define USB_OUTEPT(usbx, eptn) ((otg_eptout_type *)((uint32_t)usbx + OTG_DEVICE_EPTOUT_ADDR_OFFSET + eptn * 0x20)) /*!< usb device endpoint out register */ +#define USB_FIFO(usbx, eptn) *(__IO uint32_t *)((uint32_t)usbx + OTG_FIFO_ADDR_OFFSET + eptn * 0x1000) /*!< usb fifo address */ + + + +typedef otg_global_type usb_reg_type; + +/** @defgroup USB_exported_functions + * @{ + */ + +#ifdef OTGFS_USB_GLOBAL +error_status usb_global_reset(otg_global_type *usbx); +void usb_global_init(otg_global_type *usbx); +otg_global_type *usb_global_select_core(uint8_t usb_id); +void usb_flush_tx_fifo(otg_global_type *usbx, uint32_t fifo_num); +void usb_flush_rx_fifo(otg_global_type *usbx); +void usb_global_interrupt_enable(otg_global_type *usbx, uint16_t interrupt, confirm_state new_state); +uint32_t usb_global_get_all_interrupt(otg_global_type *usbx); +void usb_global_clear_interrupt(otg_global_type *usbx, uint32_t flag); +void usb_interrupt_enable(otg_global_type *usbx); +void usb_interrupt_disable(otg_global_type *usbx); +void usb_set_rx_fifo(otg_global_type *usbx, uint16_t size); +void usb_set_tx_fifo(otg_global_type *usbx, uint8_t txfifo, uint16_t size); +void usb_global_set_mode(otg_global_type *usbx, uint32_t mode); +void usb_global_power_on(otg_global_type *usbx); +void usb_write_packet(otg_global_type *usbx, uint8_t *pusr_buf, uint16_t num, uint16_t nbytes); +void usb_read_packet(otg_global_type *usbx, uint8_t *pusr_buf, uint16_t num, uint16_t nbytes); +void usb_stop_phy_clk(otg_global_type *usbx); +void usb_open_phy_clk(otg_global_type *usbx); +#endif + +#ifdef OTGFS_USB_DEVICE +void usb_ept_open(otg_global_type *usbx, usb_ept_info *ept_info); +void usb_ept_close(otg_global_type *usbx, usb_ept_info *ept_info); +void usb_ept_stall(otg_global_type *usbx, usb_ept_info *ept_info); +void usb_ept_clear_stall(otg_global_type *usbx, usb_ept_info *ept_info); +uint32_t usb_get_all_out_interrupt(otg_global_type *usbx); +uint32_t usb_get_all_in_interrupt(otg_global_type *usbx); +uint32_t usb_ept_out_interrupt(otg_global_type *usbx, uint32_t eptn); +uint32_t usb_ept_in_interrupt(otg_global_type *usbx, uint32_t eptn); +void usb_ept_out_clear(otg_global_type *usbx, uint32_t eptn, uint32_t flag); +void usb_ept_in_clear(otg_global_type *usbx, uint32_t eptn, uint32_t flag); +void usb_set_address(otg_global_type *usbx, uint8_t address); +void usb_ept0_start(otg_global_type *usbx); +void usb_ept0_setup(otg_global_type *usbx); +void usb_connect(otg_global_type *usbx); +void usb_disconnect(otg_global_type *usbx); +void usb_remote_wkup_set(otg_global_type *usbx); +void usb_remote_wkup_clear(otg_global_type *usbx); +uint8_t usb_suspend_status_get(otg_global_type *usbx); +#endif + +#ifdef OTGFS_USB_HOST +void usb_port_power_on(otg_global_type *usbx, confirm_state state); +uint32_t usbh_get_frame(otg_global_type *usbx); +void usb_hc_enable(otg_global_type *usbx, + uint8_t chn, + uint8_t ept_num, + uint8_t dev_address, + uint8_t type, + uint16_t maxpacket, + uint8_t speed); +uint32_t usb_hch_read_interrupt(otg_global_type *usbx); +void usb_host_disable(otg_global_type *usbx); +void usb_hch_halt(otg_global_type *usbx, uint8_t chn); +void usbh_fsls_clksel(otg_global_type *usbx, uint8_t clk); +#endif +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_wdt.h b/armlib/at32_sys/drivers/inc/at32f435_437_wdt.h new file mode 100644 index 000000000..5cc24927e --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_wdt.h @@ -0,0 +1,195 @@ +/** + ************************************************************************** + * @file at32f435_437_wdt.h + * @brief at32f435_437 wdt header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_WDT_H +#define __AT32F435_437_WDT_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup WDT + * @{ + */ + + +/** @defgroup WDT_flags_definition + * @brief wdt flag + * @{ + */ + +#define WDT_DIVF_UPDATE_FLAG ((uint16_t)0x0001) /*!< wdt division value update complete flag */ +#define WDT_RLDF_UPDATE_FLAG ((uint16_t)0x0002) /*!< wdt reload value update complete flag */ +#define WDT_WINF_UPDATE_FLAG ((uint16_t)0x0004) /*!< wdt window value update complete flag */ + +/** + * @} + */ + +/** @defgroup WDT_exported_types + * @{ + */ + +/** + * @brief wdt division value type + */ +typedef enum +{ + WDT_CLK_DIV_4 = 0x00, /*!< wdt clock divider value is 4 */ + WDT_CLK_DIV_8 = 0x01, /*!< wdt clock divider value is 8 */ + WDT_CLK_DIV_16 = 0x02, /*!< wdt clock divider value is 16 */ + WDT_CLK_DIV_32 = 0x03, /*!< wdt clock divider value is 32 */ + WDT_CLK_DIV_64 = 0x04, /*!< wdt clock divider value is 64 */ + WDT_CLK_DIV_128 = 0x05, /*!< wdt clock divider value is 128 */ + WDT_CLK_DIV_256 = 0x06 /*!< wdt clock divider value is 256 */ +} wdt_division_type; + +/** + * @brief wdt cmd value type + */ +typedef enum +{ + WDT_CMD_LOCK = 0x0000, /*!< disable write protection command */ + WDT_CMD_UNLOCK = 0x5555, /*!< enable write protection command */ + WDT_CMD_ENABLE = 0xCCCC, /*!< enable wdt command */ + WDT_CMD_RELOAD = 0xAAAA /*!< reload command */ +} wdt_cmd_value_type; + +/** + * @brief type define wdt register all + */ +typedef struct +{ + + /** + * @brief wdt cmd register, offset:0x00 + */ + union + { + __IO uint32_t cmd; + struct + { + __IO uint32_t cmd : 16;/* [15:0] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } cmd_bit; + }; + + /** + * @brief wdt div register, offset:0x04 + */ + union + { + __IO uint32_t div; + struct + { + __IO uint32_t div : 3; /* [2:0] */ + __IO uint32_t reserved1 : 29;/* [31:3] */ + } div_bit; + }; + + /** + * @brief wdt rld register, offset:0x08 + */ + union + { + __IO uint32_t rld; + struct + { + __IO uint32_t rld : 12;/* [11:0] */ + __IO uint32_t reserved1 : 20;/* [31:12] */ + } rld_bit; + }; + + /** + * @brief wdt sts register, offset:0x0C + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t divf : 1; /* [0] */ + __IO uint32_t rldf : 1; /* [1] */ + __IO uint32_t reserved1 : 30;/* [31:2] */ + } sts_bit; + }; + + /** + * @brief wdt win register, offset:0x10 + */ + union + { + __IO uint32_t win; + struct + { + __IO uint32_t win : 12;/* [11:0] */ + __IO uint32_t reserved1 : 20;/* [31:12] */ + } win_bit; + }; +} wdt_type; + +/** + * @} + */ + +#define WDT ((wdt_type *) WDT_BASE) + +/** @defgroup WDT_exported_functions + * @{ + */ + +void wdt_enable(void); +void wdt_counter_reload(void); +void wdt_reload_value_set(uint16_t reload_value); +void wdt_divider_set(wdt_division_type division); +void wdt_register_write_enable( confirm_state new_state); +flag_status wdt_flag_get(uint16_t wdt_flag); +void wdt_window_counter_set(uint16_t window_cnt); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_wwdt.h b/armlib/at32_sys/drivers/inc/at32f435_437_wwdt.h new file mode 100644 index 000000000..f73217702 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_wwdt.h @@ -0,0 +1,157 @@ +/** + ************************************************************************** + * @file at32f435_437_wwdt.h + * @brief at32f435_437 wwdt header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_WWDT_H +#define __AT32F435_437_WWDT_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup WWDT + * @{ + */ + +/** @defgroup WWDT_enable_bit_definition + * @brief wwdt enable bit + * @{ + */ + +#define WWDT_EN_BIT ((uint32_t)0x00000080) /*!< wwdt enable bit */ + +/** + * @} + */ + +/** @defgroup WWDT_exported_types + * @{ + */ + +/** + * @brief wwdt division type + */ +typedef enum +{ + WWDT_PCLK1_DIV_4096 = 0x00, /*!< wwdt counter clock = (pclk1/4096)/1) */ + WWDT_PCLK1_DIV_8192 = 0x01, /*!< wwdt counter clock = (pclk1/4096)/2) */ + WWDT_PCLK1_DIV_16384 = 0x02, /*!< wwdt counter clock = (pclk1/4096)/4) */ + WWDT_PCLK1_DIV_32768 = 0x03 /*!< wwdt counter clock = (pclk1/4096)/8) */ +} wwdt_division_type; + +/** + * @brief type define wwdt register all + */ +typedef struct +{ + + /** + * @brief wwdt ctrl register, offset:0x00 + */ + union + { + __IO uint32_t ctrl; + struct + { + __IO uint32_t cnt : 7; /* [6:0] */ + __IO uint32_t wwdten : 1; /* [7] */ + __IO uint32_t reserved1 : 24;/* [31:8] */ + } ctrl_bit; + }; + + /** + * @brief wwdt cfg register, offset:0x04 + */ + union + { + __IO uint32_t cfg; + struct + { + __IO uint32_t win : 7; /* [6:0] */ + __IO uint32_t div : 2; /* [8:7] */ + __IO uint32_t rldien : 1; /* [9] */ + __IO uint32_t reserved1 : 22;/* [31:10] */ + } cfg_bit; + }; + + /** + * @brief wwdt cfg register, offset:0x08 + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t rldf : 1; /* [0] */ + __IO uint32_t reserved1 : 31;/* [31:1] */ + } sts_bit; + }; + +} wwdt_type; + +/** + * @} + */ + +#define WWDT ((wwdt_type *) WWDT_BASE) + +/** @defgroup WWDT_exported_functions + * @{ + */ + +void wwdt_reset(void); +void wwdt_divider_set(wwdt_division_type division); +void wwdt_flag_clear(void); +void wwdt_enable(uint8_t wwdt_cnt); +void wwdt_interrupt_enable(void); +flag_status wwdt_flag_get(void); +flag_status wwdt_interrupt_flag_get(void); +void wwdt_counter_set(uint8_t wwdt_cnt); +void wwdt_window_counter_set(uint8_t window_cnt); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/inc/at32f435_437_xmc.h b/armlib/at32_sys/drivers/inc/at32f435_437_xmc.h new file mode 100644 index 000000000..398ddb289 --- /dev/null +++ b/armlib/at32_sys/drivers/inc/at32f435_437_xmc.h @@ -0,0 +1,1074 @@ +/** + ************************************************************************** + * @file at32f435_437_xmc.h + * @brief at32f435_437 xmc header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __AT32F435_437_XMC_H +#define __AT32F435_437_XMC_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "at32f435_437.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @addtogroup XMC + * @{ + */ + +/** @defgroup XMC_exported_types + * @{ + */ + +/** + * @brief xmc data address bus multiplexing type + */ +typedef enum +{ + XMC_DATA_ADDR_MUX_DISABLE = 0x00000000, /*!< xmc address/data multiplexing disable */ + XMC_DATA_ADDR_MUX_ENABLE = 0x00000002 /*!< xmc address/data multiplexing enable */ +} xmc_data_addr_mux_type; + +/** + * @brief xmc burst access mode type + */ +typedef enum +{ + XMC_BURST_MODE_DISABLE = 0x00000000, /*!< xmc burst mode disable */ + XMC_BURST_MODE_ENABLE = 0x00000100 /*!< xmc burst mode enable */ +} xmc_burst_access_mode_type; + +/** + * @brief xmc asynchronous wait type + */ +typedef enum +{ + XMC_ASYN_WAIT_DISABLE = 0x00000000, /*!< xmc wait signal during asynchronous transfers disbale */ + XMC_ASYN_WAIT_ENABLE = 0x00008000 /*!< xmc wait signal during asynchronous transfers enable */ +} xmc_asyn_wait_type; + +/** + * @brief xmc wrapped mode type + */ +typedef enum +{ + XMC_WRAPPED_MODE_DISABLE = 0x00000000, /*!< xmc direct wrapped burst is disbale */ + XMC_WRAPPED_MODE_ENABLE = 0x00000400 /*!< xmc direct wrapped burst is enable */ +} xmc_wrap_mode_type; + +/** + * @brief xmc write operation type + */ +typedef enum +{ + XMC_WRITE_OPERATION_DISABLE = 0x00000000, /*!< xmc write operations is disable */ + XMC_WRITE_OPERATION_ENABLE = 0x00001000 /*!< xmc write operations is enable */ +} xmc_write_operation_type; + +/** + * @brief xmc wait signal type + */ +typedef enum +{ + XMC_WAIT_SIGNAL_DISABLE = 0x00000000, /*!< xmc nwait signal is disable */ + XMC_WAIT_SIGNAL_ENABLE = 0x00002000 /*!< xmc nwait signal is enable */ +} xmc_wait_signal_type; + +/** + * @brief xmc write burst type + */ +typedef enum +{ + XMC_WRITE_BURST_SYN_DISABLE = 0x00000000, /*!< xmc write operations are always performed in asynchronous mode */ + XMC_WRITE_BURST_SYN_ENABLE = 0x00080000 /*!< xmc write operations are performed in synchronous mode */ +} xmc_write_burst_type; + +/** + * @brief xmc extended mode type + */ +typedef enum +{ + XMC_WRITE_TIMING_DISABLE = 0x00000000, /*!< xmc write timing disable */ + XMC_WRITE_TIMING_ENABLE = 0x00004000 /*!< xmc write timing enable */ +} xmc_extended_mode_type; + +/** + * @brief xmc pccard wait type + */ +typedef enum +{ + XMC_WAIT_OPERATION_DISABLE = 0x00000000, /*!< xmc wait operation for the pc card/nand flash memory bank disable */ + XMC_WAIT_OPERATION_ENABLE = 0x00000002 /*!< xmc wait operation for the pc card/nand flash memory bank enable */ +} xmc_nand_pccard_wait_type; + +/** + * @brief xmc ecc enable type + */ +typedef enum +{ + XMC_ECC_OPERATION_DISABLE = 0x00000000, /*!< xmc ecc module disable */ + XMC_ECC_OPERATION_ENABLE = 0x00000040 /*!< xmc ecc module enable */ +} xmc_ecc_enable_type; + +/** + * @brief xmc nor/sram subbank type + */ +typedef enum +{ + XMC_BANK1_NOR_SRAM1 = 0x00000000, /*!< xmc nor/sram subbank1 */ + XMC_BANK1_NOR_SRAM2 = 0x00000001, /*!< xmc nor/sram subbank2 */ + XMC_BANK1_NOR_SRAM3 = 0x00000002, /*!< xmc nor/sram subbank3 */ + XMC_BANK1_NOR_SRAM4 = 0x00000003 /*!< xmc nor/sram subbank4 */ +} xmc_nor_sram_subbank_type; + +/** + * @brief xmc class bank type + */ +typedef enum +{ + XMC_BANK2_NAND = 0x00000000, /*!< xmc nand flash bank2 */ + XMC_BANK3_NAND = 0x00000001, /*!< xmc nand flash bank3 */ + XMC_BANK4_PCCARD = 0x00000002, /*!< xmc pc card bank4 */ + XMC_BANK5_6_SDRAM = 0x00000003 /*!< xmc sdram bank5/6 */ +} xmc_class_bank_type; + +/** + * @brief xmc memory type + */ +typedef enum +{ + XMC_DEVICE_SRAM = 0x00000000, /*!< xmc device choice sram */ + XMC_DEVICE_PSRAM = 0x00000004, /*!< xmc device choice psram */ + XMC_DEVICE_NOR = 0x00000008 /*!< xmc device choice nor flash */ +} xmc_memory_type; + +/** + * @brief xmc data width type + */ +typedef enum +{ + XMC_BUSTYPE_8_BITS = 0x00000000, /*!< xmc databuss width 8bits */ + XMC_BUSTYPE_16_BITS = 0x00000010 /*!< xmc databuss width 16bits */ +} xmc_data_width_type; + +/** + * @brief xmc wait signal polarity type + */ +typedef enum +{ + XMC_WAIT_SIGNAL_LEVEL_LOW = 0x00000000, /*!< xmc nwait active low */ + XMC_WAIT_SIGNAL_LEVEL_HIGH = 0x00000200 /*!< xmc nwait active high */ +} xmc_wait_signal_polarity_type; + +/** + * @brief xmc wait timing type + */ +typedef enum +{ + XMC_WAIT_SIGNAL_SYN_BEFORE = 0x00000000, /*!< xmc nwait signal is active one data cycle before wait state */ + XMC_WAIT_SIGNAL_SYN_DURING = 0x00000800 /*!< xmc nwait signal is active during wait state */ +} xmc_wait_timing_type; + +/** + * @brief xmc access mode type + */ +typedef enum +{ + XMC_ACCESS_MODE_A = 0x00000000, /*!< xmc access mode A */ + XMC_ACCESS_MODE_B = 0x10000000, /*!< xmc access mode B */ + XMC_ACCESS_MODE_C = 0x20000000, /*!< xmc access mode C */ + XMC_ACCESS_MODE_D = 0x30000000 /*!< xmc access mode D */ +} xmc_access_mode_type; + +/** + * @brief xmc ecc page size type + */ +typedef enum +{ + XMC_ECC_PAGESIZE_256_BYTES = 0x00000000, /*!< xmc ecc page size 256 bytes */ + XMC_ECC_PAGESIZE_512_BYTES = 0x00020000, /*!< xmc ecc page size 512 bytes */ + XMC_ECC_PAGESIZE_1024_BYTES = 0x00040000, /*!< xmc ecc page size 1024 bytes */ + XMC_ECC_PAGESIZE_2048_BYTES = 0x00060000, /*!< xmc ecc page size 2048 bytes */ + XMC_ECC_PAGESIZE_4096_BYTES = 0x00080000, /*!< xmc ecc page size 4096 bytes */ + XMC_ECC_PAGESIZE_8192_BYTES = 0x000A0000 /*!< xmc ecc page size 8192 bytes */ +} xmc_ecc_pagesize_type; + +/** + * @brief xmc interrupt sources type + */ +typedef enum +{ + XMC_INT_RISING_EDGE = 0x00000008, /*!< xmc rising edge detection interrupt enable */ + XMC_INT_LEVEL = 0x00000010, /*!< xmc high-level edge detection interrupt enable */ + XMC_INT_FALLING_EDGE = 0x00000020, /*!< xmc falling edge detection interrupt enable */ + XMC_INT_ERR = 0x00004000 /*!< xmc sdram error interrupt enable */ +} xmc_interrupt_sources_type; + +/** + * @brief xmc interrupt flag type + */ +typedef enum +{ + XMC_RISINGEDGE_FLAG = 0x00000001, /*!< xmc interrupt rising edge detection flag */ + XMC_LEVEL_FLAG = 0x00000002, /*!< xmc interrupt high-level edge detection flag */ + XMC_FALLINGEDGE_FLAG = 0x00000004, /*!< xmc interrupt falling edge detection flag */ + XMC_FEMPT_FLAG = 0x00000040, /*!< xmc fifo empty flag */ + XMC_ERR_FLAG = 0x00000001, /*!< xmc sdram error flag */ + XMC_BUSY_FLAG = 0x00000020 /*!< xmc sdram busy flag */ +} xmc_interrupt_flag_type; + +/** + * @brief xmc sdram number of column address type + */ +typedef enum +{ + XMC_COLUMN_8 = 0x00000000, /*!< xmc sdram column address 8bit */ + XMC_COLUMN_9 = 0x00000001, /*!< xmc sdram column address 9bit */ + XMC_COLUMN_10 = 0x00000002, /*!< xmc sdram column address 10bit */ + XMC_COLUMN_11 = 0x00000003 /*!< xmc sdram column address 11bit */ +}xmc_sdram_column_type; + +/** + * @brief xmc sdram number of row address type + */ +typedef enum +{ + XMC_ROW_11 = 0x00000000, /*!< xmc sdram row address 11bit */ + XMC_ROW_12 = 0x00000001, /*!< xmc sdram row address 12bit */ + XMC_ROW_13 = 0x00000002 /*!< xmc sdram row address 13bit */ +}xmc_sdram_row_type; + +/** + * @brief xmc sdram memory data bus width type + */ +typedef enum +{ + XMC_MEM_WIDTH_8 = 0x00000000, /*!< xmc sdram data bus width 8 */ + XMC_MEM_WIDTH_16 = 0x00000001 /*!< xmc sdram data bus width 16 */ +}xmc_sdram_width_type; + +/** + * @brief xmc sdram number of internal banks type + */ +typedef enum +{ + XMC_INBK_2 = 0x00000000, /*!< xmc sdram 2 internal banks */ + XMC_INBK_4 = 0x00000001 /*!< xmc sdram 4 internal banks */ +}xmc_sdram_inbk_type; + +/** + * @brief xmc sdram cas latency type + */ +typedef enum +{ + XMC_CAS_1 = 0x00000001, /*!< xmc sdram cas 1 */ + XMC_CAS_2 = 0x00000002, /*!< xmc sdram cas 2 */ + XMC_CAS_3 = 0x00000003 /*!< xmc sdram cas 3 */ +}xmc_sdram_cas_type; + +/** + * @brief xmc sdram clock div type + */ +typedef enum +{ + XMC_NO_CLK = 0x00000000, /*!< xmc sdram disable clock */ + XMC_CLKDIV_2 = 0x00000002, /*!< xmc sdram clock div 2 */ + XMC_CLKDIV_3 = 0x00000003, /*!< xmc sdram clock div 3 */ + XMC_CLKDIV_4 = 0x00000001 /*!< xmc sdram clock div 4 */ +}xmc_sdram_clkdiv_type; + +/** + * @brief xmc sdram read delay + */ +typedef enum +{ + XMC_READ_DELAY_0 = 0x00000000, /*!< xmc sdram no delay */ + XMC_READ_DELAY_1 = 0x00000001, /*!< xmc sdram delay 1 clock*/ + XMC_READ_DELAY_2 = 0x00000002, /*!< xmc sdram delay 2 clock */ +}xmc_sdram_rd_delay_type; + +/** + * @brief xmc sdram bank type + */ +typedef enum +{ + XMC_SDRAM_BANK1 = 0x00000000, /*!< xmc sdram bank 1 */ + XMC_SDRAM_BANK2 = 0x00000001 /*!< xmc sdram bank 2 */ +}xmc_sdram_bank_type; + + +/** + * @brief xmc sdram timing delay cycle type + */ +typedef enum +{ + XMC_DELAY_CYCLE_1 = 0x00000000, /*!< xmc sdram timming delay 1 cycle */ + XMC_DELAY_CYCLE_2 = 0x00000001, /*!< xmc sdram timming delay 2 cycle */ + XMC_DELAY_CYCLE_3 = 0x00000002, /*!< xmc sdram timming delay 3 cycle */ + XMC_DELAY_CYCLE_4 = 0x00000003, /*!< xmc sdram timming delay 4 cycle */ + XMC_DELAY_CYCLE_5 = 0x00000004, /*!< xmc sdram timming delay 5 cycle */ + XMC_DELAY_CYCLE_6 = 0x00000005, /*!< xmc sdram timming delay 6 cycle */ + XMC_DELAY_CYCLE_7 = 0x00000006, /*!< xmc sdram timming delay 7 cycle */ + XMC_DELAY_CYCLE_8 = 0x00000007, /*!< xmc sdram timming delay 8 cycle */ + XMC_DELAY_CYCLE_9 = 0x00000008, /*!< xmc sdram timming delay 9 cycle */ + XMC_DELAY_CYCLE_10 = 0x00000009, /*!< xmc sdram timming delay 10 cycle */ + XMC_DELAY_CYCLE_11 = 0x0000000A, /*!< xmc sdram timming delay 11 cycle */ + XMC_DELAY_CYCLE_12 = 0x0000000B, /*!< xmc sdram timming delay 12 cycle */ + XMC_DELAY_CYCLE_13 = 0x0000000C, /*!< xmc sdram timming delay 13 cycle */ + XMC_DELAY_CYCLE_14 = 0x0000000D, /*!< xmc sdram timming delay 14 cycle */ + XMC_DELAY_CYCLE_15 = 0x0000000E, /*!< xmc sdram timming delay 15 cycle */ + XMC_DELAY_CYCLE_16 = 0x0000000F /*!< xmc sdram timming delay 16 cycle */ +}xmc_sdram_delay_type; + + +/** + * @brief xmc sdram command type + */ +typedef enum +{ + XMC_CMD_NORMAL = 0x00000000, /*!< xmc sdram command normal */ + XMC_CMD_CLK = 0x00000001, /*!< xmc sdram command clock enable */ + XMC_CMD_PRECHARG_ALL = 0x00000002, /*!< xmc sdram command precharg all bank */ + XMC_CMD_AUTO_REFRESH = 0x00000003, /*!< xmc sdram command auto refresh */ + XMC_CMD_LOAD_MODE = 0x00000004, /*!< xmc sdram command load mode register */ + XMC_CMD_SELF_REFRESH = 0x00000005, /*!< xmc sdram command self refresh */ + XMC_CMD_POWER_DOWN = 0x00000006 /*!< xmc sdram command power down */ +}xmc_command_type; + +/** + * @brief xmc sdram command bank select type + */ +typedef enum +{ + XMC_CMD_BANK1 = 0x00000010, /*!< send xmc sdram command to bank1 */ + XMC_CMD_BANK2 = 0x00000008, /*!< send xmc sdram command to bank2 */ + XMC_CMD_BANK1_2 = 0x00000018 /*!< send xmc sdram command to bank1 and bank2 */ +}xmc_cmd_bank1_2_type; + + +/** + * @brief xmc sdram bank status type + */ +typedef enum +{ + XMC_STATUS_NORMAL = 0x00000000, /*!< xmc sdram status normal */ + XMC_STATUS_SELF_REFRESH = 0x00000001, /*!< xmc sdram status self refresh */ + XMC_STATUS_POWER_DOWN = 0x00000002, /*!< xmc sdram power down */ + XMC_STATUS_MASK = 0x00000003 /*!< xmc sdram mask */ +}xmc_bank_status_type; + + +/** + * @brief nor/sram banks timing parameters + */ +typedef struct +{ + xmc_nor_sram_subbank_type subbank; /*!< xmc nor/sram subbank */ + xmc_extended_mode_type write_timing_enable; /*!< xmc nor/sram write timing enable */ + uint32_t addr_setup_time; /*!< xmc nor/sram address setup time */ + uint32_t addr_hold_time; /*!< xmc nor/sram address hold time */ + uint32_t data_setup_time; /*!< xmc nor/sram data setup time */ + uint32_t bus_latency_time; /*!< xmc nor/sram bus latency time */ + uint32_t clk_psc; /*!< xmc nor/sram clock prescale */ + uint32_t data_latency_time; /*!< xmc nor/sram data latency time */ + xmc_access_mode_type mode; /*!< xmc nor/sram access mode */ +} xmc_norsram_timing_init_type; + +/** + * @brief xmc nor/sram init structure definition + */ +typedef struct +{ + xmc_nor_sram_subbank_type subbank; /*!< xmc nor/sram subbank */ + xmc_data_addr_mux_type data_addr_multiplex; /*!< xmc nor/sram address/data multiplexing enable */ + xmc_memory_type device; /*!< xmc nor/sram memory device */ + xmc_data_width_type bus_type; /*!< xmc nor/sram data bus width */ + xmc_burst_access_mode_type burst_mode_enable; /*!< xmc nor/sram burst mode enable */ + xmc_asyn_wait_type asynwait_enable; /*!< xmc nor/sram nwait in asynchronous transfer enable */ + xmc_wait_signal_polarity_type wait_signal_lv; /*!< xmc nor/sram nwait polarity */ + xmc_wrap_mode_type wrapped_mode_enable; /*!< xmc nor/sram wrapped enable */ + xmc_wait_timing_type wait_signal_config; /*!< xmc nor/sram nwait timing configuration */ + xmc_write_operation_type write_enable; /*!< xmc nor/sram write enable */ + xmc_wait_signal_type wait_signal_enable; /*!< xmc nor/sram nwait in synchronous transfer enable */ + xmc_extended_mode_type write_timing_enable; /*!< xmc nor/sram read-write timing different */ + xmc_write_burst_type write_burst_syn; /*!< xmc nor/sram memory write mode control */ +} xmc_norsram_init_type; + +/** + * @brief nand and pccard timing parameters xmc + */ + +typedef struct +{ + xmc_class_bank_type class_bank; /*!< xmc nand/pccard bank */ + uint32_t mem_setup_time; /*!< xmc nand/pccard memory setup time */ + uint32_t mem_waite_time; /*!< xmc nand/pccard memory wait time */ + uint32_t mem_hold_time; /*!< xmc nand/pccard memory hold time */ + uint32_t mem_hiz_time; /*!< xmc nand/pccard memory databus high resistance time */ +} xmc_nand_pccard_timinginit_type; + +/** + * @brief xmc nand init structure definition + */ + +typedef struct +{ + xmc_class_bank_type nand_bank; /*!< xmc nand bank */ + xmc_nand_pccard_wait_type wait_enable; /*!< xmc wait feature enable */ + xmc_data_width_type bus_type; /*!< xmc nand bus width */ + xmc_ecc_enable_type ecc_enable; /*!< xmc nand ecc enable */ + xmc_ecc_pagesize_type ecc_pagesize; /*!< xmc nand ecc page size */ + uint32_t delay_time_cycle; /*!< xmc nand cle to re delay */ + uint32_t delay_time_ar; /*!< xmc nand ale to re delay */ +} xmc_nand_init_type; + +/** + * @brief xmc pccard init structure definition + */ + +typedef struct +{ + xmc_nand_pccard_wait_type enable_wait; /*!< xmc pccard wait feature enable */ + uint32_t delay_time_cr; /*!< xmc pccard cle to re delay */ + uint32_t delay_time_ar; /*!< xmc pccard ale to re delay */ +} xmc_pccard_init_type; + +/** + * @brief xmc sdram init structure definition + */ + +typedef struct +{ + xmc_sdram_bank_type sdram_bank; /*!< xmc sdram bank bype */ + xmc_sdram_inbk_type internel_banks; /*!< xmc sdram internal banks */ + xmc_sdram_clkdiv_type clkdiv; /*!< xmc sdram clock div */ + uint8_t write_protection; /*!< xmc sdram write protection */ + uint8_t burst_read; /*!< xmc sdram burst read */ + uint8_t read_delay; /*!< xmc sdram read delay */ + xmc_sdram_column_type column_address; /*!< xmc sdram column address */ + xmc_sdram_row_type row_address; /*!< xmc sdram row address */ + xmc_sdram_cas_type cas; /*!< xmc sdram cas */ + xmc_sdram_width_type width; /*!< xmc sdram data width */ +} xmc_sdram_init_type; + +/** + * @brief xmc sdram timing structure definition + */ + +typedef struct +{ + xmc_sdram_delay_type tmrd; /*!< mode register program to active delay */ + xmc_sdram_delay_type txsr; /*!< exit self-refresh to active delay */ + xmc_sdram_delay_type tras; /*!< self refresh */ + xmc_sdram_delay_type trc; /*!< refresh to active delay */ + xmc_sdram_delay_type twr; /*!< write recovery delay */ + xmc_sdram_delay_type trp; /*!< precharge to active delay */ + xmc_sdram_delay_type trcd; /*!< row active to read/write delay */ +} xmc_sdram_timing_type; + +/** + * @brief xmc sdram command structure definition + */ + +typedef struct +{ + xmc_command_type cmd; /*!< sdram command */ + xmc_cmd_bank1_2_type cmd_banks; /*!< which bank send command */ + uint32_t auto_refresh; /*!< auto refresh times */ + uint32_t data; /*!< mode register data */ +} xmc_sdram_cmd_type; + +typedef struct +{ + /** + * @brief xmc bank1 bk1ctrl register, offset:0x00+0x08*(x-1) x= 1...4 + */ + union + { + __IO uint32_t bk1ctrl; + struct + { + __IO uint32_t en : 1; /* [0] */ + __IO uint32_t admuxen : 1; /* [1] */ + __IO uint32_t dev : 2; /* [3:2] */ + __IO uint32_t extmdbw : 2; /* [5:4] */ + __IO uint32_t noren : 1; /* [6] */ + __IO uint32_t reserved1 : 1; /* [7] */ + __IO uint32_t syncben : 1; /* [8] */ + __IO uint32_t nwpol : 1; /* [9] */ + __IO uint32_t wrapen : 1; /* [10] */ + __IO uint32_t nwtcfg : 1; /* [11] */ + __IO uint32_t wen : 1; /* [12] */ + __IO uint32_t nwsen : 1; /* [13] */ + __IO uint32_t rwtd : 1; /* [14] */ + __IO uint32_t nwasen : 1; /* [15] */ + __IO uint32_t crpgs : 3; /* [18:16] */ + __IO uint32_t mwmc : 1; /* [19] */ + __IO uint32_t reserved2 : 12;/* [31:20] */ + } bk1ctrl_bit; + }; + + /** + * @brief xmc bank1 bk1tmg register, offset:0x04+0x08*(x-1) x= 1...4 + */ + union + { + __IO uint32_t bk1tmg; + struct + { + __IO uint32_t addrst : 4; /* [3:0] */ + __IO uint32_t addrht : 4; /* [7:4] */ + __IO uint32_t dtst : 8; /* [15:8] */ + __IO uint32_t buslat : 4; /* [19:16] */ + __IO uint32_t clkpsc : 4; /* [23:20] */ + __IO uint32_t dtlat : 4; /* [27:24] */ + __IO uint32_t asyncm : 2; /* [29:28] */ + __IO uint32_t reserved1 : 2; /* [31:30] */ + } bk1tmg_bit; + }; + +} xmc_bank1_ctrl_tmg_reg_type; + +typedef struct +{ + /** + * @brief xmc bank1 bk1tmgwr register, offset:0x104+0x08*(x-1) x= 1...4 + */ + union + { + __IO uint32_t bk1tmgwr; + struct + { + __IO uint32_t addrst : 4; /* [3:0] */ + __IO uint32_t addrht : 4; /* [7:4] */ + __IO uint32_t dtst : 8; /* [15:8] */ + __IO uint32_t buslat : 4; /* [19:16] */ + __IO uint32_t reserved1 : 8; /* [27:20] */ + __IO uint32_t asyncm : 2; /* [29:28] */ + __IO uint32_t reserved2 : 2; /* [31:30] */ + } bk1tmgwr_bit; + }; + + /** + * @brief xmc bank1 reserved register + */ + __IO uint32_t reserved1; + +} xmc_bank1_tmgwr_reg_type; + +/** + * @brief xmc bank1 registers + */ +typedef struct +{ + /** + * @brief xmc bank1 ctrl and tmg register, offset:0x00~0x1C + */ + xmc_bank1_ctrl_tmg_reg_type ctrl_tmg_group[4]; + + /** + * @brief xmc bank1 reserved register, offset:0x20~0x100 + */ + __IO uint32_t reserved1[57]; + + /** + * @brief xmc bank1 tmgwr register, offset:0x104~0x11C + */ + xmc_bank1_tmgwr_reg_type tmgwr_group[4]; + + /** + * @brief xmc bank1 reserved register, offset:0x120~0x220 + */ + __IO uint32_t reserved2[63]; + + /** + * @brief xmc bank1 ext register, offset:0x220~0x22C + */ + union + { + __IO uint32_t ext[4]; + struct + { + __IO uint32_t buslatw2w : 8; /* [7:0] */ + __IO uint32_t buslatr2r : 8; /* [15:8] */ + __IO uint32_t reserved1 : 16;/* [31:16] */ + } ext_bit[4]; + }; + +} xmc_bank1_type; + +/** + * @brief xmc bank2 registers + */ +typedef struct +{ + /** + * @brief xmc bk2ctrl register, offset:0x60 + */ + union + { + __IO uint32_t bk2ctrl; + struct + { + __IO uint32_t reserved1 : 1; /* [0] */ + __IO uint32_t nwen : 1; /* [1] */ + __IO uint32_t en : 1; /* [2] */ + __IO uint32_t dev : 1; /* [3] */ + __IO uint32_t extmdbw : 2; /* [5:4] */ + __IO uint32_t eccen : 1; /* [6] */ + __IO uint32_t reserved2 : 2; /* [8:7] */ + __IO uint32_t tcr : 4; /* [12:9] */ + __IO uint32_t tar : 4; /* [16:13] */ + __IO uint32_t eccpgs : 3; /* [19:17] */ + __IO uint32_t reserved3 : 12;/* [31:20] */ + } bk2ctrl_bit; + }; + + /** + * @brief xmc bk2is register, offset:0x64 + */ + union + { + __IO uint32_t bk2is; + struct + { + __IO uint32_t res : 1; /* [0] */ + __IO uint32_t hls : 1; /* [1] */ + __IO uint32_t fes : 1; /* [2] */ + __IO uint32_t reien : 1; /* [3] */ + __IO uint32_t hlien : 1; /* [4] */ + __IO uint32_t feien : 1; /* [5] */ + __IO uint32_t fifoe : 1; /* [6] */ + __IO uint32_t reserved1 : 25;/* [31:7] */ + } bk2is_bit; + }; + + /** + * @brief xmc bk2tmgmem register, offset:0x68 + */ + union + { + __IO uint32_t bk2tmgmem; + struct + { + __IO uint32_t cmst : 8; /* [7:0] */ + __IO uint32_t cmwt : 8; /* [15:8] */ + __IO uint32_t cmht : 8; /* [23:16] */ + __IO uint32_t cmdhizt : 8; /* [31:24] */ + } bk2tmgmem_bit; + }; + + /** + * @brief xmc bk2tmgatt register, offset:0x6C + */ + union + { + __IO uint32_t bk2tmgatt; + struct + { + __IO uint32_t amst : 8; /* [7:0] */ + __IO uint32_t amwt : 8; /* [15:8] */ + __IO uint32_t amht : 8; /* [23:16] */ + __IO uint32_t amdhizt : 8; /* [31:24] */ + } bk2tmgatt_bit; + }; + + /** + * @brief xmc reserved register, offset:0x70 + */ + __IO uint32_t reserved1; + + /** + * @brief xmc bk2ecc register, offset:0x74 + */ + union + { + __IO uint32_t bk2ecc; + struct + { + __IO uint32_t ecc : 32; /* [31:0] */ + } bk2ecc_bit; + }; + +} xmc_bank2_type; + +/** + * @brief xmc bank3 registers + */ +typedef struct +{ + /** + * @brief xmc bk3ctrl register, offset:0x80 + */ + union + { + __IO uint32_t bk3ctrl; + struct + { + __IO uint32_t reserved1 : 1; /* [0] */ + __IO uint32_t nwen : 1; /* [1] */ + __IO uint32_t en : 1; /* [2] */ + __IO uint32_t dev : 1; /* [3] */ + __IO uint32_t extmdbw : 2; /* [5:4] */ + __IO uint32_t eccen : 1; /* [6] */ + __IO uint32_t reserved2 : 2; /* [8:7] */ + __IO uint32_t tcr : 4; /* [12:9] */ + __IO uint32_t tar : 4; /* [16:13] */ + __IO uint32_t eccpgs : 3; /* [19:17] */ + __IO uint32_t reserved3 : 12;/* [31:20] */ + } bk3ctrl_bit; + }; + + /** + * @brief xmc bk3is register, offset:0x84 + */ + union + { + __IO uint32_t bk3is; + struct + { + __IO uint32_t res : 1; /* [0] */ + __IO uint32_t hls : 1; /* [1] */ + __IO uint32_t fes : 1; /* [2] */ + __IO uint32_t reien : 1; /* [3] */ + __IO uint32_t hlien : 1; /* [4] */ + __IO uint32_t feien : 1; /* [5] */ + __IO uint32_t fifoe : 1; /* [6] */ + __IO uint32_t reserved1 : 25;/* [31:7] */ + } bk3is_bit; + }; + + /** + * @brief xmc bk3tmgmem register, offset:0x88 + */ + union + { + __IO uint32_t bk3tmgmem; + struct + { + __IO uint32_t cmst : 8; /* [7:0] */ + __IO uint32_t cmwt : 8; /* [15:8] */ + __IO uint32_t cmht : 8; /* [23:16] */ + __IO uint32_t cmdhizt : 8; /* [31:24] */ + } bk3tmgmem_bit; + }; + + /** + * @brief xmc bk3tmgatt register, offset:0x8C + */ + union + { + __IO uint32_t bk3tmgatt; + struct + { + __IO uint32_t amst : 8; /* [7:0] */ + __IO uint32_t amwt : 8; /* [15:8] */ + __IO uint32_t amht : 8; /* [23:16] */ + __IO uint32_t amdhizt : 8; /* [31:24] */ + } bk3tmgatt_bit; + }; + + /** + * @brief xmc reserved register, offset:0x90 + */ + __IO uint32_t reserved1; + + /** + * @brief xmc bk3ecc register, offset:0x94 + */ + union + { + __IO uint32_t bk3ecc; + struct + { + __IO uint32_t ecc : 32; /* [31:0] */ + } bk3ecc_bit; + }; +} xmc_bank3_type; + +/** + * @brief xmc bank4 registers + */ +typedef struct +{ + + /** + * @brief xmc bk4ctrl register, offset:0xA0 + */ + union + { + __IO uint32_t bk4ctrl; + struct + { + __IO uint32_t reserved1 : 1; /* [0] */ + __IO uint32_t nwen : 1; /* [1] */ + __IO uint32_t en : 1; /* [2] */ + __IO uint32_t dev : 1; /* [3] */ + __IO uint32_t extmdbw : 2; /* [5:4] */ + __IO uint32_t eccen : 1; /* [6] */ + __IO uint32_t reserved2 : 2; /* [8:7] */ + __IO uint32_t tcr : 4; /* [12:9] */ + __IO uint32_t tar : 4; /* [16:13] */ + __IO uint32_t eccpgs : 3; /* [19:17] */ + __IO uint32_t reserved3 : 12;/* [31:20] */ + } bk4ctrl_bit; + }; + + /** + * @brief xmc bk4is register, offset:0xA4 + */ + union + { + __IO uint32_t bk4is; + struct + { + __IO uint32_t res : 1; /* [0] */ + __IO uint32_t hls : 1; /* [1] */ + __IO uint32_t fes : 1; /* [2] */ + __IO uint32_t reien : 1; /* [3] */ + __IO uint32_t hlien : 1; /* [4] */ + __IO uint32_t feien : 1; /* [5] */ + __IO uint32_t fifoe : 1; /* [6] */ + __IO uint32_t reserved1 : 25;/* [31:7] */ + } bk4is_bit; + }; + + /** + * @brief xmc bk4tmgmem register, offset:0xA8 + */ + union + { + __IO uint32_t bk4tmgmem; + struct + { + __IO uint32_t cmst : 8; /* [7:0] */ + __IO uint32_t cmwt : 8; /* [15:8] */ + __IO uint32_t cmht : 8; /* [23:16] */ + __IO uint32_t cmdhizt : 8; /* [31:24] */ + } bk4tmgmem_bit; + }; + + /** + * @brief xmc bk4tmgatt register, offset:0xAC + */ + union + { + __IO uint32_t bk4tmgatt; + struct + { + __IO uint32_t amst : 8; /* [7:0] */ + __IO uint32_t amwt : 8; /* [15:8] */ + __IO uint32_t amht : 8; /* [23:16] */ + __IO uint32_t amdhizt : 8; /* [31:24] */ + } bk4tmgatt_bit; + }; + + /** + * @brief xmc bk4tmgio register, offset:0xB0 + */ + union + { + __IO uint32_t bk4tmgio; + struct + { + __IO uint32_t iost : 8; /* [7:0] */ + __IO uint32_t iowt : 8; /* [15:8] */ + __IO uint32_t ioht : 8; /* [23:16] */ + __IO uint32_t iohizt : 8; /* [31:24] */ + } bk4tmgio_bit; + }; +} xmc_bank4_type; + +/** + * @brief xmc sdram type + */ +typedef struct +{ + /** + * @brief xmc sdram ctrl register, offset:0x140~0x144 + */ + union + { + __IO uint32_t ctrl[2]; + struct + { + __IO uint32_t ca : 2; /* [1:0] */ + __IO uint32_t ra : 2; /* [3:2] */ + __IO uint32_t db : 2; /* [5:4] */ + __IO uint32_t inbk : 1; /* [6] */ + __IO uint32_t cas : 2; /* [8:7] */ + __IO uint32_t wrp : 1; /* [9] */ + __IO uint32_t clkdiv : 2; /* [11:10] */ + __IO uint32_t bstr : 1; /* [12] */ + __IO uint32_t rd : 2; /* [14:13] */ + __IO uint32_t reserved1 : 17;/* [31:15] */ + } ctrl_bit[2]; + }; + + /** + * @brief xmc sdram tm register, offset:0x148~0x14C + */ + union + { + __IO uint32_t tm[2]; + struct + { + __IO uint32_t tmrd : 4; /* [3:0] */ + __IO uint32_t txsr : 4; /* [7:4] */ + __IO uint32_t tras : 4; /* [11:8] */ + __IO uint32_t trc : 4; /* [15:12] */ + __IO uint32_t twr : 4; /* [19:16] */ + __IO uint32_t trp : 4; /* [23:20] */ + __IO uint32_t trcd : 4; /* [27:24] */ + __IO uint32_t reserved1 : 4; /* [31:28] */ + } tm_bit[2]; + + }; + +/** + * @brief xmc sdram cmd register, offset:0x150 + */ + union + { + __IO uint32_t cmd; + struct + { + __IO uint32_t cmd : 3; /* [2:0] */ + __IO uint32_t bk2 : 1; /* [3] */ + __IO uint32_t bk1 : 1; /* [4] */ + __IO uint32_t art : 4; /* [8:5] */ + __IO uint32_t mrd : 13;/* [21:9] */ + __IO uint32_t reserved1 : 10;/* [31:22] */ + } cmd_bit; + }; + + /** + * @brief xmc sdram rcnt register, offset:0x154 + */ + union + { + __IO uint32_t rcnt; + struct + { + __IO uint32_t errc : 1; /* [0] */ + __IO uint32_t rc : 13;/* [13:1] */ + __IO uint32_t erien : 1; /* [14] */ + __IO uint32_t reserved1 : 17;/* [31:15] */ + } rcnt_bit; + }; + + /** + * @brief xmc sdram sts register, offset:0x158 + */ + union + { + __IO uint32_t sts; + struct + { + __IO uint32_t err : 1; /* [0] */ + __IO uint32_t bk1sts : 2; /* [2:1] */ + __IO uint32_t bk2sts : 2; /* [4:3] */ + __IO uint32_t busy : 1; /* [5] */ + __IO uint32_t reserved1 : 26;/* [31:6] */ + } sts_bit; + }; +}xmc_sdram_type; + +/** + * @} + */ + +#define XMC_BANK1 ((xmc_bank1_type *) XMC_BANK1_REG_BASE) +#define XMC_BANK2 ((xmc_bank2_type *) XMC_BANK2_REG_BASE) +#define XMC_BANK3 ((xmc_bank3_type *) XMC_BANK3_REG_BASE) +#define XMC_BANK4 ((xmc_bank4_type *) XMC_BANK4_REG_BASE) +#define XMC_SDRAM ((xmc_sdram_type *) XMC_SDRAM_REG_BASE) + +/** @defgroup XMC_exported_functions + * @{ + */ + +void xmc_nor_sram_reset(xmc_nor_sram_subbank_type xmc_subbank); +void xmc_nor_sram_init(xmc_norsram_init_type* xmc_norsram_init_struct); +void xmc_nor_sram_timing_config(xmc_norsram_timing_init_type* xmc_rw_timing_struct, + xmc_norsram_timing_init_type* xmc_w_timing_struct); +void xmc_norsram_default_para_init(xmc_norsram_init_type* xmc_nor_sram_init_struct); +void xmc_norsram_timing_default_para_init(xmc_norsram_timing_init_type* xmc_rw_timing_struct, + xmc_norsram_timing_init_type* xmc_w_timing_struct); +void xmc_nor_sram_enable(xmc_nor_sram_subbank_type xmc_subbank, confirm_state new_state); +void xmc_ext_timing_config(volatile xmc_nor_sram_subbank_type xmc_sub_bank, uint16_t w2w_timing, uint16_t r2r_timing); +void xmc_nand_reset(xmc_class_bank_type xmc_bank); +void xmc_nand_init(xmc_nand_init_type* xmc_nand_init_struct); +void xmc_nand_timing_config(xmc_nand_pccard_timinginit_type* xmc_common_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_attribute_spacetiming_struct); +void xmc_nand_default_para_init(xmc_nand_init_type* xmc_nand_init_struct); +void xmc_nand_timing_default_para_init(xmc_nand_pccard_timinginit_type* xmc_common_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_attribute_spacetiming_struct); +void xmc_nand_enable(xmc_class_bank_type xmc_bank, confirm_state new_state); +void xmc_nand_ecc_enable(xmc_class_bank_type xmc_bank, confirm_state new_state); +uint32_t xmc_ecc_get(xmc_class_bank_type xmc_bank); +void xmc_interrupt_enable(xmc_class_bank_type xmc_bank, xmc_interrupt_sources_type xmc_int, confirm_state new_state); +flag_status xmc_flag_status_get(xmc_class_bank_type xmc_bank, xmc_interrupt_flag_type xmc_flag); +flag_status xmc_interrupt_flag_status_get(xmc_class_bank_type xmc_bank, xmc_interrupt_flag_type xmc_flag); +void xmc_flag_clear(xmc_class_bank_type xmc_bank, xmc_interrupt_flag_type xmc_flag); +void xmc_pccard_reset(void); +void xmc_pccard_init(xmc_pccard_init_type* xmc_pccard_init_struct); +void xmc_pccard_timing_config(xmc_nand_pccard_timinginit_type* xmc_common_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_attribute_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_iospace_timing_struct); +void xmc_pccard_default_para_init(xmc_pccard_init_type* xmc_pccard_init_struct); +void xmc_pccard_timing_default_para_init(xmc_nand_pccard_timinginit_type* xmc_common_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_attribute_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_iospace_timing_struct); +void xmc_pccard_enable(confirm_state new_state); +void xmc_sdram_reset(xmc_sdram_bank_type xmc_bank); +void xmc_sdram_init(xmc_sdram_init_type *xmc_sdram_init_struct, xmc_sdram_timing_type *xmc_sdram_timing_struct); +void xmc_sdram_default_para_init(xmc_sdram_init_type *xmc_sdram_init_struct, xmc_sdram_timing_type *xmc_sdram_timing_struct); +void xmc_sdram_cmd(xmc_sdram_cmd_type *xmc_sdram_cmd_struct); +uint32_t xmc_sdram_status_get(xmc_sdram_bank_type xmc_bank); +void xmc_sdram_refresh_counter_set(uint32_t counter); +void xmc_sdram_auto_refresh_set(uint32_t number); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_sys/drivers/src/at32f435_437_acc.c b/armlib/at32_sys/drivers/src/at32f435_437_acc.c new file mode 100644 index 000000000..193becdaa --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_acc.c @@ -0,0 +1,247 @@ +/** + ************************************************************************** + * @file at32f435_437_acc.c + * @brief contains all the functions for the acc firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_acc.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup ACC + * @brief ACC driver modules + * @{ + */ + +#ifdef ACC_MODULE_ENABLED + +/** @defgroup ACC_private_functions + * @{ + */ + +/** + * @brief enable or disable the acc calibration mode. + * @param acc_trim: specifies the acc calibration type. + * this parameter can be one of the following values: + * - ACC_CAL_HICKCAL + * - ACC_CAL_HICKTRIM + * @param new_state: specifies the acc calibration to be enabled or disabled.(TRUE or FALSE) + * @retval none + */ +void acc_calibration_mode_enable(uint16_t acc_trim, confirm_state new_state) +{ + if(acc_trim == ACC_CAL_HICKCAL) + { + ACC->ctrl1_bit.entrim = FALSE; + } + else + { + ACC->ctrl1_bit.entrim = TRUE; + } + ACC->ctrl1_bit.calon = new_state; +} + +/** + * @brief store calibration step data in acc's ctrl1 register. + * @param step_value: value to be stored in the acc's ctrl1 register + * @retval none + */ +void acc_step_set(uint8_t step_value) +{ + ACC->ctrl1_bit.step = step_value; +} + +/** + * @brief select sof sourse for acc in acc's ctrl1 register. + * @param sof_sel: value to be stored in the acc's ctrl1 register + * this parameter can be one of the following values: + * @arg ACC_SOF_OTG1 + * @arg ACC_SOF_OTG2 + * @retval none + */ +void acc_sof_select(uint16_t sof_sel) +{ + ACC->ctrl1 |= sof_sel; +} + +/** + * @brief enable or disable the specified acc interrupts. + * @param acc_int: specifies the acc interrupt sources to be enabled or disabled. + * this parameter can be one of the following values: + * - ACC_CALRDYIEN_INT + * - ACC_EIEN_INT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void acc_interrupt_enable(uint16_t acc_int, confirm_state new_state) +{ + if(acc_int == ACC_CALRDYIEN_INT) + { + ACC->ctrl1_bit.calrdyien = new_state; + } + else + { + ACC->ctrl1_bit.eien = new_state; + } +} + +/** + * @brief return the current acc hicktrim value. + * @param none + * @retval 8-bit hicktrim value. + */ +uint8_t acc_hicktrim_get(void) +{ + return ((uint8_t)(ACC->ctrl2_bit.hicktrim)); +} + +/** + * @brief return the current acc hickcal value. + * @param none + * @retval 8-bit hicktrim value. + */ +uint8_t acc_hickcal_get(void) +{ + return ((uint8_t)(ACC->ctrl2_bit.hickcal)); +} + +/** + * @brief wtire the value to acc c1 register. + * @param acc_c1_value + * @retval none. + */ +void acc_write_c1(uint16_t acc_c1_value) +{ + ACC->c1 = acc_c1_value; +} + +/** + * @brief wtire the value to acc c2 register. + * @param acc_c2_value + * @retval none. + */ +void acc_write_c2(uint16_t acc_c2_value) +{ + ACC->c2 = acc_c2_value; +} + +/** + * @brief wtire the value to acc c3 register. + * @param acc_c3_value + * @retval none. + */ +void acc_write_c3(uint16_t acc_c3_value) +{ + ACC->c3 = acc_c3_value; +} + +/** + * @brief return the current acc c1 value. + * @param none + * @retval 16-bit c1 value. + */ +uint16_t acc_read_c1(void) +{ + return ((uint16_t)(ACC->c1)); +} + +/** + * @brief return the current acc c2 value. + * @param none + * @retval 16-bit c2 value. + */ +uint16_t acc_read_c2(void) +{ + return ((uint16_t)(ACC->c2)); +} + +/** + * @brief return the current acc c3 value. + * @param none + * @retval 16-bit c3 value. + */ +uint16_t acc_read_c3(void) +{ + return ((uint16_t)(ACC->c3)); +} + +/** + * @brief check whether the specified acc flag is set or not. + * @param acc_flag: specifies the flag to check. + * this parameter can be one of the following values: + * - ACC_RSLOST_FLAG + * - ACC_CALRDY_FLAG + * @retval flag_status (SET or RESET) + */ +flag_status acc_flag_get(uint16_t acc_flag) +{ + if(acc_flag == ACC_CALRDY_FLAG) + return (flag_status)(ACC->sts_bit.calrdy); + else + return (flag_status)(ACC->sts_bit.rslost); +} + +/** + * @brief check whether the specified acc interrupt flag is set or not. + * @param acc_flag: specifies the flag to check. + * this parameter can be one of the following values: + * - ACC_RSLOST_FLAG + * - ACC_CALRDY_FLAG + * @retval flag_status (SET or RESET) + */ +flag_status acc_interrupt_flag_get(uint16_t acc_flag) +{ + if(acc_flag == ACC_CALRDY_FLAG) + return (flag_status)(ACC->sts_bit.calrdy && ACC->ctrl1_bit.calrdyien); + else + return (flag_status)(ACC->sts_bit.rslost && ACC->ctrl1_bit.eien); +} + + +/** + * @brief clear the specified acc flag is set or not. + * @param acc_flag: specifies the flag to check. + * this parameter can be any combination of the following values: + * - ACC_RSLOST_FLAG + * - ACC_CALRDY_FLAG + * @retval none + */ +void acc_flag_clear(uint16_t acc_flag) +{ + ACC->sts = ~acc_flag; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_adc.c b/armlib/at32_sys/drivers/src/at32f435_437_adc.c new file mode 100644 index 000000000..509e90097 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_adc.c @@ -0,0 +1,1140 @@ +/** + ************************************************************************** + * @file at32f435_437_adc.c + * @brief contains all the functions for the adc firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_adc.h" +#include "at32f435_437_crm.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup ADC + * @brief ADC driver modules + * @{ + */ + +#ifdef ADC_MODULE_ENABLED + +/** @defgroup ADC_private_functions + * @{ + */ + +/** + * @brief deinitialize the adc peripheral registers to their default reset values. + * @param none + * @retval none + */ +void adc_reset(void) +{ + crm_periph_reset(CRM_ADC_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_ADC_PERIPH_RESET, FALSE); +} + +/** + * @brief enable or disable the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of a/d converter. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl2_bit.adcen = new_state; +} + +/** + * @brief adc base default para init. + * @param sequence_mode: set the state of adc sequence mode. + * this parameter can be:TRUE or FALSE + * @param repeat_mode: set the state of adc repeat conversion mode. + * this parameter can be:TRUE or FALSE + * @param data_align: set the state of adc data alignment. + * this parameter can be one of the following values: + * - ADC_RIGHT_ALIGNMENT + * - ADC_LEFT_ALIGNMENT + * @param ordinary_channel_length: configure the adc ordinary channel sequence length. + * this parameter can be: + * - (0x1~0x10) + * @retval none + */ +void adc_base_default_para_init(adc_base_config_type *adc_base_struct) +{ + adc_base_struct->sequence_mode = FALSE; + adc_base_struct->repeat_mode = FALSE; + adc_base_struct->data_align = ADC_RIGHT_ALIGNMENT; + adc_base_struct->ordinary_channel_length = 1; +} + +/** + * @brief initialize the adc peripheral according to the specified parameters. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param sequence_mode: set the state of adc sequence mode. + * this parameter can be:TRUE or FALSE + * @param repeat_mode: set the state of adc repeat conversion mode. + * this parameter can be:TRUE or FALSE + * @param data_align: set the state of adc data alignment. + * this parameter can be one of the following values: + * - ADC_RIGHT_ALIGNMENT + * - ADC_LEFT_ALIGNMENT + * @param ordinary_channel_length: configure the adc ordinary channel sequence length. + * this parameter can be: + * - (0x1~0x10) + * @retval none + */ +void adc_base_config(adc_type *adc_x, adc_base_config_type *adc_base_struct) +{ + adc_x->ctrl1_bit.sqen = adc_base_struct->sequence_mode; + adc_x->ctrl2_bit.rpen = adc_base_struct->repeat_mode; + adc_x->ctrl2_bit.dtalign = adc_base_struct->data_align; + adc_x->osq1_bit.oclen = adc_base_struct->ordinary_channel_length - 1; +} + +/** + * @brief adc common default para init. + * @param combine_mode: configure the adc combine_mode mode. + * this parameter can be one of the following values: + * - ADC_INDEPENDENT_MODE - ADC_ORDINARY_SMLT_PREEMPT_SMLT_ONESLAVE_MODE - ADC_ORDINARY_SMLT_PREEMPT_INTERLTRIG_ONESLAVE_MODE + * - ADC_PREEMPT_SMLT_ONLY_ONESLAVE_MODE - ADC_ORDINARY_SMLT_ONLY_ONESLAVE_MODE - ADC_ORDINARY_SHIFT_ONLY_ONESLAVE_MODE + * - ADC_PREEMPT_INTERLTRIG_ONLY_ONESLAVE_MODE - ADC_ORDINARY_SMLT_PREEMPT_SMLT_TWOSLAVE_MODE - ADC_ORDINARY_SMLT_PREEMPT_INTERLTRIG_TWOSLAVE_MODE + * - ADC_PREEMPT_SMLT_ONLY_TWOSLAVE_MODE - ADC_ORDINARY_SMLT_ONLY_TWOSLAVE_MODE - ADC_ORDINARY_SHIFT_ONLY_TWOSLAVE_MODE + * - ADC_PREEMPT_INTERLTRIG_ONLY_TWOSLAVE_MODE + * @param div: configure the adc division. + * this parameter can be one of the following values: + * - ADC_HCLK_DIV_2 - ADC_HCLK_DIV_3 - ADC_HCLK_DIV_4 - ADC_HCLK_DIV_5 + * - ADC_HCLK_DIV_6 - ADC_HCLK_DIV_7 - ADC_HCLK_DIV_8 - ADC_HCLK_DIV_9 + * - ADC_HCLK_DIV_10 - ADC_HCLK_DIV_11 - ADC_HCLK_DIV_12 - ADC_HCLK_DIV_13 + * - ADC_HCLK_DIV_14 - ADC_HCLK_DIV_15 - ADC_HCLK_DIV_16 - ADC_HCLK_DIV_17 + * @param common_dma_mode: configure the adc common dma mode. + * this parameter can be one of the following values: + * - ADC_COMMON_DMAMODE_DISABLE + * - ADC_COMMON_DMAMODE_1 + * - ADC_COMMON_DMAMODE_2 + * - ADC_COMMON_DMAMODE_3 + * - ADC_COMMON_DMAMODE_4 + * - ADC_COMMON_DMAMODE_5 + * @param common_dma_request_repeat_state: set the adc common dma request repeat state. + * this parameter can be:TRUE or FALSE + * @param sampling_interval: configure the ordinary shifting mode adjacent adc sampling interval. + * this parameter can be one of the following values: + * - ADC_SAMPLING_INTERVAL_5CYCLES - ADC_SAMPLING_INTERVAL_6CYCLES - ADC_SAMPLING_INTERVAL_7CYCLES - ADC_SAMPLING_INTERVAL_8CYCLES + * - ADC_SAMPLING_INTERVAL_9CYCLES - ADC_SAMPLING_INTERVAL_10CYCLES - ADC_SAMPLING_INTERVAL_11CYCLES - ADC_SAMPLING_INTERVAL_12CYCLES + * - ADC_SAMPLING_INTERVAL_13CYCLES - ADC_SAMPLING_INTERVAL_14CYCLES - ADC_SAMPLING_INTERVAL_15CYCLES - ADC_SAMPLING_INTERVAL_16CYCLES + * - ADC_SAMPLING_INTERVAL_17CYCLES - ADC_SAMPLING_INTERVAL_18CYCLES - ADC_SAMPLING_INTERVAL_19CYCLES - ADC_SAMPLING_INTERVAL_20CYCLES + * @param tempervintrv_state: set the adc temperature sensor and vintrv state. + * this parameter can be:TRUE or FALSE + * @param vbat_state: set the adc voltage battery state. + * this parameter can be:TRUE or FALSE + * @retval none + */ +void adc_common_default_para_init(adc_common_config_type *adc_common_struct) +{ + adc_common_struct->combine_mode = ADC_INDEPENDENT_MODE; + adc_common_struct->div = ADC_HCLK_DIV_2; + adc_common_struct->common_dma_mode = ADC_COMMON_DMAMODE_DISABLE; + adc_common_struct->common_dma_request_repeat_state = FALSE; + adc_common_struct->sampling_interval = ADC_SAMPLING_INTERVAL_5CYCLES; + adc_common_struct->tempervintrv_state = FALSE; + adc_common_struct->vbat_state = FALSE; +} + +/** + * @brief adc common default para init. + * @param combine_mode: configure the adc combine_mode mode. + * this parameter can be one of the following values: + * - ADC_INDEPENDENT_MODE - ADC_ORDINARY_SMLT_PREEMPT_SMLT_ONESLAVE_MODE - ADC_ORDINARY_SMLT_PREEMPT_INTERLTRIG_ONESLAVE_MODE + * - ADC_PREEMPT_SMLT_ONLY_ONESLAVE_MODE - ADC_ORDINARY_SMLT_ONLY_ONESLAVE_MODE - ADC_ORDINARY_SHIFT_ONLY_ONESLAVE_MODE + * - ADC_PREEMPT_INTERLTRIG_ONLY_ONESLAVE_MODE - ADC_ORDINARY_SMLT_PREEMPT_SMLT_TWOSLAVE_MODE - ADC_ORDINARY_SMLT_PREEMPT_INTERLTRIG_TWOSLAVE_MODE + * - ADC_PREEMPT_SMLT_ONLY_TWOSLAVE_MODE - ADC_ORDINARY_SMLT_ONLY_TWOSLAVE_MODE - ADC_ORDINARY_SHIFT_ONLY_TWOSLAVE_MODE + * - ADC_PREEMPT_INTERLTRIG_ONLY_TWOSLAVE_MODE + * @param div: configure the adc division. + * this parameter can be one of the following values: + * - ADC_HCLK_DIV_2 - ADC_HCLK_DIV_3 - ADC_HCLK_DIV_4 - ADC_HCLK_DIV_5 + * - ADC_HCLK_DIV_6 - ADC_HCLK_DIV_7 - ADC_HCLK_DIV_8 - ADC_HCLK_DIV_9 + * - ADC_HCLK_DIV_10 - ADC_HCLK_DIV_11 - ADC_HCLK_DIV_12 - ADC_HCLK_DIV_13 + * - ADC_HCLK_DIV_14 - ADC_HCLK_DIV_15 - ADC_HCLK_DIV_16 - ADC_HCLK_DIV_17 + * @param common_dma_mode: configure the adc common dma mode. + * this parameter can be one of the following values: + * - ADC_COMMON_DMAMODE_DISABLE + * - ADC_COMMON_DMAMODE_1 + * - ADC_COMMON_DMAMODE_2 + * - ADC_COMMON_DMAMODE_3 + * - ADC_COMMON_DMAMODE_4 + * - ADC_COMMON_DMAMODE_5 + * @param common_dma_request_repeat_state: set the adc common dma request repeat state. + * this parameter can be:TRUE or FALSE + * @param sampling_interval: configure the ordinary shifting mode adjacent adc sampling interval. + * this parameter can be one of the following values: + * - ADC_SAMPLING_INTERVAL_5CYCLES - ADC_SAMPLING_INTERVAL_6CYCLES - ADC_SAMPLING_INTERVAL_7CYCLES - ADC_SAMPLING_INTERVAL_8CYCLES + * - ADC_SAMPLING_INTERVAL_9CYCLES - ADC_SAMPLING_INTERVAL_10CYCLES - ADC_SAMPLING_INTERVAL_11CYCLES - ADC_SAMPLING_INTERVAL_12CYCLES + * - ADC_SAMPLING_INTERVAL_13CYCLES - ADC_SAMPLING_INTERVAL_14CYCLES - ADC_SAMPLING_INTERVAL_15CYCLES - ADC_SAMPLING_INTERVAL_16CYCLES + * - ADC_SAMPLING_INTERVAL_17CYCLES - ADC_SAMPLING_INTERVAL_18CYCLES - ADC_SAMPLING_INTERVAL_19CYCLES - ADC_SAMPLING_INTERVAL_20CYCLES + * @param tempervintrv_state: set the adc temperature sensor and vintrv state. + * this parameter can be:TRUE or FALSE + * @param vbat_state: set the adc voltage battery state. + * this parameter can be:TRUE or FALSE + * @retval none + */ +void adc_common_config(adc_common_config_type *adc_common_struct) +{ + ADCCOM->cctrl_bit.mssel = adc_common_struct->combine_mode; + ADCCOM->cctrl_bit.adcdiv = adc_common_struct->div; + if(adc_common_struct->common_dma_mode & 0x04) + { + ADCCOM->cctrl_bit.msdmasel_h = TRUE; + } + else + { + ADCCOM->cctrl_bit.msdmasel_h = FALSE; + } + ADCCOM->cctrl_bit.msdmasel_l = adc_common_struct->common_dma_mode &0x03; + ADCCOM->cctrl_bit.msdrcen = adc_common_struct->common_dma_request_repeat_state; + ADCCOM->cctrl_bit.asisel = adc_common_struct->sampling_interval; + ADCCOM->cctrl_bit.itsrven = adc_common_struct->tempervintrv_state; + ADCCOM->cctrl_bit.vbaten = adc_common_struct->vbat_state; +} + +/** + * @brief set resolution of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param resolution: set the conversion resolution. + * this parameter can be one of the following values: + * - ADC_RESOLUTION_12B + * - ADC_RESOLUTION_10B + * - ADC_RESOLUTION_8B + * - ADC_RESOLUTION_6B + * @retval none + */ +void adc_resolution_set(adc_type *adc_x, adc_resolution_type resolution) +{ + adc_x->ctrl1_bit.crsel = resolution; +} + +/** + * @brief enable or disable the adc voltage battery. + * @param new_state: new state of the adc voltage battery. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_voltage_battery_enable(confirm_state new_state) +{ + ADCCOM->cctrl_bit.vbaten = new_state; +} + +/** + * @brief enable or disable the adc dma transfer. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of the adc dma transfer. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_dma_mode_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl2_bit.ocdmaen = new_state; +} + +/** + * @brief enable or disable the adc dma request repeat. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: the adc dma request repeat state. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_dma_request_repeat_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl2_bit.ocdrcen = new_state; +} + +/** + * @brief enable or disable the specified adc interrupts. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_int: specifies the adc interrupt sources to be enabled or disabled. + * this parameter can be one of the following values: + * - ADC_OCCE_INT + * - ADC_VMOR_INT + * - ADC_PCCE_INT + * - ADC_OCCO_INT + * @param new_state: new state of the specified adc interrupts. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_interrupt_enable(adc_type *adc_x, uint32_t adc_int, confirm_state new_state) +{ + if(new_state == TRUE) + { + adc_x->ctrl1 |= adc_int; + } + else if(new_state == FALSE) + { + adc_x->ctrl1 &= ~adc_int; + } +} + +/** + * @brief set calibration value of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_calibration_value: calibration value of adc. + * this parameter can be: + * - (0x00~0x7F) + * @retval none + */ +void adc_calibration_value_set(adc_type *adc_x, uint8_t adc_calibration_value) +{ + adc_x->calval = adc_calibration_value; +} + +/** + * @brief initialize calibration register of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval none + */ +void adc_calibration_init(adc_type *adc_x) +{ + adc_x->ctrl2_bit.adcalinit = TRUE; +} + +/** + * @brief get calibration register's initialize status of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval the new state of reset calibration register status(SET or RESET). + */ +flag_status adc_calibration_init_status_get(adc_type *adc_x) +{ + if(adc_x->ctrl2_bit.adcalinit) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief start calibration process of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval none + */ +void adc_calibration_start(adc_type *adc_x) +{ + adc_x->ctrl2_bit.adcal = TRUE; +} + +/** + * @brief get calibration status of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval the new state of calibration status(SET or RESET). + */ +flag_status adc_calibration_status_get(adc_type *adc_x) +{ + if(adc_x->ctrl2_bit.adcal) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief enable or disable the voltage monitoring on single/all ordinary or preempt channels of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_voltage_monitoring: choose the adc_voltage_monitoring config. + * this parameter can be one of the following values: + * - ADC_VMONITOR_SINGLE_ORDINARY + * - ADC_VMONITOR_SINGLE_PREEMPT + * - ADC_VMONITOR_SINGLE_ORDINARY_PREEMPT + * - ADC_VMONITOR_ALL_ORDINARY + * - ADC_VMONITOR_ALL_PREEMPT + * - ADC_VMONITOR_ALL_ORDINARY_PREEMPT + * - ADC_VMONITOR_NONE + * @retval none + */ +void adc_voltage_monitor_enable(adc_type *adc_x, adc_voltage_monitoring_type adc_voltage_monitoring) +{ + adc_x->ctrl1_bit.ocvmen = FALSE; + adc_x->ctrl1_bit.pcvmen = FALSE; + adc_x->ctrl1_bit.vmsgen = FALSE; + adc_x->ctrl1 |= adc_voltage_monitoring; +} + +/** + * @brief set voltage monitoring's high and low thresholds value of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_high_threshold: voltage monitoring's high thresholds value. + * this parameter can be: + * - (0x0000~0xFFFF) + * @param adc_low_threshold: voltage monitoring's low thresholds value. + * this parameter can be: + * - (0x0000~0xFFFF) + * @retval none + */ +void adc_voltage_monitor_threshold_value_set(adc_type *adc_x, uint16_t adc_high_threshold, uint16_t adc_low_threshold) +{ + adc_x->vmhb_bit.vmhb = adc_high_threshold; + adc_x->vmlb_bit.vmlb = adc_low_threshold; +} + +/** + * @brief select the voltage monitoring's channel of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_channel: select the channel. + * this parameter can be one of the following values: + * - ADC_CHANNEL_0 - ADC_CHANNEL_1 - ADC_CHANNEL_2 - ADC_CHANNEL_3 + * - ADC_CHANNEL_4 - ADC_CHANNEL_5 - ADC_CHANNEL_6 - ADC_CHANNEL_7 + * - ADC_CHANNEL_8 - ADC_CHANNEL_9 - ADC_CHANNEL_10 - ADC_CHANNEL_11 + * - ADC_CHANNEL_12 - ADC_CHANNEL_13 - ADC_CHANNEL_14 - ADC_CHANNEL_15 + * - ADC_CHANNEL_16 - ADC_CHANNEL_17 - ADC_CHANNEL_18 + * @retval none + */ +void adc_voltage_monitor_single_channel_select(adc_type *adc_x, adc_channel_select_type adc_channel) +{ + adc_x->ctrl1_bit.vmcsel = adc_channel; +} + +/** + * @brief set ordinary channel's corresponding rank in the sequencer and sample time of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_channel: select the channel. + * this parameter can be one of the following values: + * - ADC_CHANNEL_0 - ADC_CHANNEL_1 - ADC_CHANNEL_2 - ADC_CHANNEL_3 + * - ADC_CHANNEL_4 - ADC_CHANNEL_5 - ADC_CHANNEL_6 - ADC_CHANNEL_7 + * - ADC_CHANNEL_8 - ADC_CHANNEL_9 - ADC_CHANNEL_10 - ADC_CHANNEL_11 + * - ADC_CHANNEL_12 - ADC_CHANNEL_13 - ADC_CHANNEL_14 - ADC_CHANNEL_15 + * - ADC_CHANNEL_16 - ADC_CHANNEL_17 - ADC_CHANNEL_18 + * @param adc_sequence: set rank in the ordinary group sequencer. + * this parameter must be: + * - between 1 to 16 + * @param adc_sampletime: set the sampletime of adc channel. + * this parameter can be one of the following values: + * - ADC_SAMPLETIME_2_5 + * - ADC_SAMPLETIME_6_5 + * - ADC_SAMPLETIME_12_5 + * - ADC_SAMPLETIME_24_5 + * - ADC_SAMPLETIME_47_5 + * - ADC_SAMPLETIME_92_5 + * - ADC_SAMPLETIME_247_5 + * - ADC_SAMPLETIME_640_5 + * @retval none + */ +void adc_ordinary_channel_set(adc_type *adc_x, adc_channel_select_type adc_channel, uint8_t adc_sequence, adc_sampletime_select_type adc_sampletime) +{ + uint32_t tmp_reg; + if(adc_channel < ADC_CHANNEL_10) + { + tmp_reg = adc_x->spt2; + tmp_reg &= ~(0x07 << 3 * adc_channel); + tmp_reg |= adc_sampletime << 3 * adc_channel; + adc_x->spt2 = tmp_reg; + } + else + { + tmp_reg = adc_x->spt1; + tmp_reg &= ~(0x07 << 3 * (adc_channel - ADC_CHANNEL_10)); + tmp_reg |= adc_sampletime << 3 * (adc_channel - ADC_CHANNEL_10); + adc_x->spt1 = tmp_reg; + } + + if(adc_sequence >= 13) + { + tmp_reg = adc_x->osq1; + tmp_reg &= ~(0x01F << 5 * (adc_sequence - 13)); + tmp_reg |= adc_channel << 5 * (adc_sequence - 13); + adc_x->osq1 = tmp_reg; + } + else if(adc_sequence >= 7) + { + tmp_reg = adc_x->osq2; + tmp_reg &= ~(0x01F << 5 * (adc_sequence - 7)); + tmp_reg |= adc_channel << 5 * (adc_sequence - 7); + adc_x->osq2 = tmp_reg; + } + else + { + tmp_reg = adc_x->osq3; + tmp_reg &= ~(0x01F << 5 * (adc_sequence - 1)); + tmp_reg |= adc_channel << 5 * (adc_sequence - 1); + adc_x->osq3 = tmp_reg; + } +} + +/** + * @brief set preempt channel lenghth of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_channel_lenght: set the adc preempt channel lenghth. + * this parameter can be: + * - (0x1~0x4) + * @retval none + */ +void adc_preempt_channel_length_set(adc_type *adc_x, uint8_t adc_channel_lenght) +{ + adc_x->psq_bit.pclen = adc_channel_lenght - 1; +} + +/** + * @brief configure preempt channel's corresponding rank in the sequencer and sample time of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_channel: select the channel. + * this parameter can be one of the following values: + * - ADC_CHANNEL_0 - ADC_CHANNEL_1 - ADC_CHANNEL_2 - ADC_CHANNEL_3 + * - ADC_CHANNEL_4 - ADC_CHANNEL_5 - ADC_CHANNEL_6 - ADC_CHANNEL_7 + * - ADC_CHANNEL_8 - ADC_CHANNEL_9 - ADC_CHANNEL_10 - ADC_CHANNEL_11 + * - ADC_CHANNEL_12 - ADC_CHANNEL_13 - ADC_CHANNEL_14 - ADC_CHANNEL_15 + * - ADC_CHANNEL_16 - ADC_CHANNEL_17 - ADC_CHANNEL_18 + * @param adc_sequence: set rank in the preempt group sequencer. + * this parameter must be: + * - between 1 to 4 + * @param adc_sampletime: config the sampletime of adc channel. + * this parameter can be one of the following values: + * - ADC_SAMPLETIME_2_5 + * - ADC_SAMPLETIME_6_5 + * - ADC_SAMPLETIME_12_5 + * - ADC_SAMPLETIME_24_5 + * - ADC_SAMPLETIME_47_5 + * - ADC_SAMPLETIME_92_5 + * - ADC_SAMPLETIME_247_5 + * - ADC_SAMPLETIME_640_5 + * @retval none + */ +void adc_preempt_channel_set(adc_type *adc_x, adc_channel_select_type adc_channel, uint8_t adc_sequence, adc_sampletime_select_type adc_sampletime) +{ + uint32_t tmp_reg; + uint8_t sequence_index; + if(adc_channel < ADC_CHANNEL_10) + { + tmp_reg = adc_x->spt2; + tmp_reg &= ~(0x07 << 3 * adc_channel); + tmp_reg |= adc_sampletime << 3 * adc_channel; + adc_x->spt2 = tmp_reg; + } + else + { + tmp_reg = adc_x->spt1; + tmp_reg &= ~(0x07 << 3 * (adc_channel - ADC_CHANNEL_10)); + tmp_reg |= adc_sampletime << 3 * (adc_channel - ADC_CHANNEL_10); + adc_x->spt1 = tmp_reg; + } + + sequence_index = adc_sequence + 3 - adc_x->psq_bit.pclen; + switch(sequence_index) + { + case 1: + adc_x->psq_bit.psn1 = adc_channel; + break; + case 2: + adc_x->psq_bit.psn2 = adc_channel; + break; + case 3: + adc_x->psq_bit.psn3 = adc_channel; + break; + case 4: + adc_x->psq_bit.psn4 = adc_channel; + break; + default: + break; + } +} + +/** + * @brief set the ordinary channel's external trigger edge and + * set external trigger event of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_ordinary_trig: select the external trigger event. + * this parameter can be one of the following values: + * - ADC_ORDINARY_TRIG_TMR1CH1 - ADC_ORDINARY_TRIG_TMR1CH2 - ADC_ORDINARY_TRIG_TMR1CH3 - ADC_ORDINARY_TRIG_TMR2CH2 + * - ADC_ORDINARY_TRIG_TMR2CH3 - ADC_ORDINARY_TRIG_TMR2CH4 - ADC_ORDINARY_TRIG_TMR2TRGOUT - ADC_ORDINARY_TRIG_TMR3CH1 + * - ADC_ORDINARY_TRIG_TMR3TRGOUT - ADC_ORDINARY_TRIG_TMR4CH4 - ADC_ORDINARY_TRIG_TMR5CH1 - ADC_ORDINARY_TRIG_TMR5CH2 + * - ADC_ORDINARY_TRIG_TMR5CH3 - ADC_ORDINARY_TRIG_TMR8CH1 - ADC_ORDINARY_TRIG_TMR8TRGOUT - ADC_ORDINARY_TRIG_EXINT11 + * - ADC_ORDINARY_TRIG_TMR20TRGOUT - ADC_ORDINARY_TRIG_TMR20TRGOUT2 - ADC_ORDINARY_TRIG_TMR20CH1 - ADC_ORDINARY_TRIG_TMR20CH2 + * - ADC_ORDINARY_TRIG_TMR20CH3 - ADC_ORDINARY_TRIG_TMR8TRGOUT2 - ADC_ORDINARY_TRIG_TMR1TRGOUT2 - ADC_ORDINARY_TRIG_TMR4TRGOUT + * - ADC_ORDINARY_TRIG_TMR6TRGOUT - ADC_ORDINARY_TRIG_TMR3CH4 - ADC_ORDINARY_TRIG_TMR4CH1 - ADC_ORDINARY_TRIG_TMR1TRGOUT + * - ADC_ORDINARY_TRIG_TMR2CH1 - ADC_ORDINARY_TRIG_TMR7TRGOUT + * @param adc_ordinary_trig_edge: ordinary channel conversion's external_trigger_edge. + * this parameter can be one of the following values: + * - ADC_ORDINARY_TRIG_EDGE_NONE + * - ADC_ORDINARY_TRIG_EDGE_RISING + * - ADC_ORDINARY_TRIG_EDGE_FALLING + * - ADC_ORDINARY_TRIG_EDGE_RISING_FALLING + * @retval none + */ +void adc_ordinary_conversion_trigger_set(adc_type *adc_x, adc_ordinary_trig_select_type adc_ordinary_trig, adc_ordinary_trig_edge_type adc_ordinary_trig_edge) +{ + if(adc_ordinary_trig > ADC_ORDINARY_TRIG_EXINT11) + { + adc_x->ctrl2_bit.octesel_h = 1; + adc_x->ctrl2_bit.octesel_l = adc_ordinary_trig & 0x0F; + } + else + { + adc_x->ctrl2_bit.octesel_h = 0; + adc_x->ctrl2_bit.octesel_l = adc_ordinary_trig & 0x0F; + } + adc_x->ctrl2_bit.ocete = adc_ordinary_trig_edge; +} + +/** + * @brief enable or disable the preempt channel's external trigger and + * set external trigger event of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_preempt_trig: select the external trigger event. + * this parameter can be one of the following values: + * - ADC_PREEMPT_TRIG_TMR1CH4 - ADC_PREEMPT_TRIG_TMR1TRGOUT - ADC_PREEMPT_TRIG_TMR2CH1 - ADC_PREEMPT_TRIG_TMR2TRGOUT + * - ADC_PREEMPT_TRIG_TMR3CH2 - ADC_PREEMPT_TRIG_TMR3CH4 - ADC_PREEMPT_TRIG_TMR4CH1 - ADC_PREEMPT_TRIG_TMR4CH2 + * - ADC_PREEMPT_TRIG_TMR4CH3 - ADC_PREEMPT_TRIG_TMR4TRGOUT - ADC_PREEMPT_TRIG_TMR5CH4 - ADC_PREEMPT_TRIG_TMR5TRGOUT + * - ADC_PREEMPT_TRIG_TMR8CH2 - ADC_PREEMPT_TRIG_TMR8CH3 - ADC_PREEMPT_TRIG_TMR8CH4 - ADC_PREEMPT_TRIG_EXINT15 + * - ADC_PREEMPT_TRIG_TMR20TRGOUT - ADC_PREEMPT_TRIG_TMR20TRGOUT2 - ADC_PREEMPT_TRIG_TMR20CH4 - ADC_PREEMPT_TRIG_TMR1TRGOUT2 + * - ADC_PREEMPT_TRIG_TMR8TRGOUT - ADC_PREEMPT_TRIG_TMR8TRGOUT2 - ADC_PREEMPT_TRIG_TMR3CH3 - ADC_PREEMPT_TRIG_TMR3TRGOUT + * - ADC_PREEMPT_TRIG_TMR3CH1 - ADC_PREEMPT_TRIG_TMR6TRGOUT - ADC_PREEMPT_TRIG_TMR4CH4 - ADC_PREEMPT_TRIG_TMR1CH3 + * - ADC_PREEMPT_TRIG_TMR20CH2 - ADC_PREEMPT_TRIG_TMR7TRGOUT + * @param adc_preempt_trig_edge: preempt channel conversion's external_trigger_edge. + * this parameter can be one of the following values: + * - ADC_PREEMPT_TRIG_EDGE_NONE + * - ADC_PREEMPT_TRIG_EDGE_RISING + * - ADC_PREEMPT_TRIG_EDGE_FALLING + * - ADC_PREEMPT_TRIG_EDGE_RISING_FALLING + * @retval none + */ +void adc_preempt_conversion_trigger_set(adc_type *adc_x, adc_preempt_trig_select_type adc_preempt_trig, adc_preempt_trig_edge_type adc_preempt_trig_edge) +{ + if(adc_preempt_trig > ADC_PREEMPT_TRIG_EXINT15) + { + adc_x->ctrl2_bit.pctesel_h = 1; + adc_x->ctrl2_bit.pctesel_l = adc_preempt_trig & 0x0F; + } + else + { + adc_x->ctrl2_bit.pctesel_h = 0; + adc_x->ctrl2_bit.pctesel_l = adc_preempt_trig & 0x0F; + } + adc_x->ctrl2_bit.pcete = adc_preempt_trig_edge; +} + +/** + * @brief set preempt channel's conversion value offset of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_preempt_channel: select the preempt channel. + * this parameter can be one of the following values: + * - ADC_PREEMPT_CHANNEL_1 + * - ADC_PREEMPT_CHANNEL_2 + * - ADC_PREEMPT_CHANNEL_3 + * - ADC_PREEMPT_CHANNEL_4 + * @param adc_offset_value: set the adc preempt channel's conversion value offset. + * this parameter can be: + * - (0x000~0xFFF) + * @retval none + */ +void adc_preempt_offset_value_set(adc_type *adc_x, adc_preempt_channel_type adc_preempt_channel, uint16_t adc_offset_value) +{ + switch(adc_preempt_channel) + { + case ADC_PREEMPT_CHANNEL_1: + adc_x->pcdto1_bit.pcdto1 = adc_offset_value; + break; + case ADC_PREEMPT_CHANNEL_2: + adc_x->pcdto2_bit.pcdto2 = adc_offset_value; + break; + case ADC_PREEMPT_CHANNEL_3: + adc_x->pcdto3_bit.pcdto3 = adc_offset_value; + break; + case ADC_PREEMPT_CHANNEL_4: + adc_x->pcdto4_bit.pcdto4 = adc_offset_value; + break; + default: + break; + } +} + +/** + * @brief set partitioned mode channel count of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_channel_count: configure the adc partitioned mode channel count. + * this parameter can be: + * - (0x1~0x8) + * @retval none + */ +void adc_ordinary_part_count_set(adc_type *adc_x, uint8_t adc_channel_count) +{ + + adc_x->ctrl1_bit.ocpcnt = adc_channel_count - 1; +} + +/** + * @brief enable or disable the partitioned mode on ordinary channel of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of ordinary channel's partitioned mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_ordinary_part_mode_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl1_bit.ocpen = new_state; +} + +/** + * @brief enable or disable the partitioned mode on preempt channel of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of preempt channel's partitioned mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_preempt_part_mode_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl1_bit.pcpen = new_state; +} + +/** + * @brief enable or disable automatic preempt group conversion of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of automatic preempt group conversion. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_preempt_auto_mode_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl1_bit.pcautoen = new_state; +} + +/** + * @brief stop the ongoing conversion of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval none + */ +void adc_conversion_stop(adc_type *adc_x) +{ + adc_x->ctrl2_bit.adabrt = TRUE; +} + +/** + * @brief get stop conversion's status of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval the new state of stop conversion's status(SET or RESET). + */ +flag_status adc_conversion_stop_status_get(adc_type *adc_x) +{ + if(adc_x->ctrl2_bit.adabrt) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief enable or disable each ordinary channel conversion set occe flag of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of each ordinary channel conversion set occe flag. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_occe_each_conversion_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl2_bit.eocsfen = new_state; +} + +/** + * @brief enable or disable ordinary software start conversion of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of ordinary software start conversion. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_ordinary_software_trigger_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl2_bit.ocswtrg = new_state; +} + +/** + * @brief get ordinary software start conversion status of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval the new state of ordinary software start conversion status(SET or RESET). + */ +flag_status adc_ordinary_software_trigger_status_get(adc_type *adc_x) +{ + if(adc_x->ctrl2_bit.ocswtrg) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief enable or disable preempt software start conversion of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of preempt software start conversion. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_preempt_software_trigger_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ctrl2_bit.pcswtrg = new_state; + adc_x->ctrl2_bit.pcswtrg = FALSE; +} + +/** + * @brief get preempt software start conversion status of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval the new state of preempt software start conversion status(SET or RESET). + */ +flag_status adc_preempt_software_trigger_status_get(adc_type *adc_x) +{ + if(adc_x->ctrl2_bit.pcswtrg) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief return the last conversion data for ordinary channel of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @retval the last conversion data for ordinary channel. + */ +uint16_t adc_ordinary_conversion_data_get(adc_type *adc_x) +{ + return (uint16_t)(adc_x->odt_bit.odt); +} + +/** + * @brief return the last ordinary conversion data of combine adc. + * @retval the last conversion data for ordinary channel. + */ +uint32_t adc_combine_ordinary_conversion_data_get(void) +{ + return (uint32_t)(ADCCOM->codt); +} + +/** + * @brief return the conversion data for selection preempt channel of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_preempt_channel: select the preempt channel. + * this parameter can be one of the following values: + * - ADC_PREEMPT_CHANNEL_1 + * - ADC_PREEMPT_CHANNEL_2 + * - ADC_PREEMPT_CHANNEL_3 + * - ADC_PREEMPT_CHANNEL_4 + * @retval the conversion data for selection preempt channel. + */ +uint16_t adc_preempt_conversion_data_get(adc_type *adc_x, adc_preempt_channel_type adc_preempt_channel) +{ + uint16_t preempt_conv_data_index = 0; + switch(adc_preempt_channel) + { + case ADC_PREEMPT_CHANNEL_1: + preempt_conv_data_index = (uint16_t)(adc_x->pdt1_bit.pdt1); + break; + case ADC_PREEMPT_CHANNEL_2: + preempt_conv_data_index = (uint16_t)(adc_x->pdt2_bit.pdt2); + break; + case ADC_PREEMPT_CHANNEL_3: + preempt_conv_data_index = (uint16_t)(adc_x->pdt3_bit.pdt3); + break; + case ADC_PREEMPT_CHANNEL_4: + preempt_conv_data_index = (uint16_t)(adc_x->pdt4_bit.pdt4); + break; + default: + break; + } + return preempt_conv_data_index; +} + +/** + * @brief get flag of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_flag: select the adc flag. + * this parameter can be one of the following values: + * - ADC_VMOR_FLAG + * - ADC_OCCE_FLAG + * - ADC_PCCE_FLAG + * - ADC_PCCS_FLAG(no interrupt associated) + * - ADC_OCCS_FLAG(no interrupt associated) + * - ADC_OCCO_FLAG + * - ADC_RDY_FLAG(no interrupt associated) + * @retval the new state of adc flag status(SET or RESET). + */ +flag_status adc_flag_get(adc_type *adc_x, uint8_t adc_flag) +{ + flag_status status = RESET; + + if((adc_x->sts & adc_flag) == RESET) + { + status = RESET; + } + else + { + status = SET; + } + return status; +} + +/** + * @brief get interrupt flag of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_flag: select the adc flag. + * this parameter can be one of the following values: + * - ADC_VMOR_FLAG + * - ADC_OCCE_FLAG + * - ADC_PCCE_FLAG + * - ADC_OCCO_FLAG + * @retval the new state of adc flag status(SET or RESET). + */ +flag_status adc_interrupt_flag_get(adc_type *adc_x, uint8_t adc_flag) +{ + flag_status status = RESET; + switch(adc_flag) + { + case ADC_VMOR_FLAG: + if(adc_x->sts_bit.vmor && adc_x->ctrl1_bit.vmorien) + { + status = SET; + } + break; + case ADC_OCCE_FLAG: + if(adc_x->sts_bit.occe && adc_x->ctrl1_bit.occeien) + { + status = SET; + } + break; + case ADC_PCCE_FLAG: + if(adc_x->sts_bit.pcce && adc_x->ctrl1_bit.pcceien) + { + status = SET; + } + break; + case ADC_OCCO_FLAG: + if(adc_x->sts_bit.occo && adc_x->ctrl1_bit.occoien) + { + status = SET; + } + break; + default: + break; + } + return status; +} + +/** + * @brief clear flag of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * ADC1, ADC2, ADC3. + * @param adc_flag: select the adc flag. + * this parameter can be any combination of the following values: + * - ADC_VMOR_FLAG + * - ADC_OCCE_FLAG(also can clear by reading the adc_x->odt) + * - ADC_PCCE_FLAG + * - ADC_PCCS_FLAG + * - ADC_OCCS_FLAG + * - ADC_OCCO_FLAG + * - note:"ADC_RDY_FLAG" cannot be choose!rdy bit is readonly bit,it means the adc is ready to accept conversion request + * @retval none + */ +void adc_flag_clear(adc_type *adc_x, uint32_t adc_flag) +{ + adc_x->sts = ~adc_flag; +} + +/** + * @brief enable or disable the ordinary oversampling of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of ordinary oversampling. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_ordinary_oversample_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ovsp_bit.oosen = new_state; +} + +/** + * @brief enable or disable the preempt oversampling of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of preempt oversampling. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_preempt_oversample_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ovsp_bit.posen = new_state; +} + +/** + * @brief config the oversampling ratio and shift of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_oversample_ratio: set the oversample ratio. + * this parameter can be one of the following values: + * - ADC_OVERSAMPLE_RATIO_2 + * - ADC_OVERSAMPLE_RATIO_4 + * - ADC_OVERSAMPLE_RATIO_8 + * - ADC_OVERSAMPLE_RATIO_16 + * - ADC_OVERSAMPLE_RATIO_32 + * - ADC_OVERSAMPLE_RATIO_64 + * - ADC_OVERSAMPLE_RATIO_128 + * - ADC_OVERSAMPLE_RATIO_256 + * @param adc_oversample_shift: set the oversample shift. + * this parameter can be one of the following values: + * - ADC_OVERSAMPLE_SHIFT_0 + * - ADC_OVERSAMPLE_SHIFT_1 + * - ADC_OVERSAMPLE_SHIFT_2 + * - ADC_OVERSAMPLE_SHIFT_3 + * - ADC_OVERSAMPLE_SHIFT_4 + * - ADC_OVERSAMPLE_SHIFT_5 + * - ADC_OVERSAMPLE_SHIFT_6 + * - ADC_OVERSAMPLE_SHIFT_7 + * - ADC_OVERSAMPLE_SHIFT_8 + * @retval none + */ +void adc_oversample_ratio_shift_set(adc_type *adc_x, adc_oversample_ratio_type adc_oversample_ratio, adc_oversample_shift_type adc_oversample_shift) +{ + adc_x->ovsp_bit.osrsel = adc_oversample_ratio; + adc_x->ovsp_bit.osssel = adc_oversample_shift; +} + +/** + * @brief enable or disable the ordinary oversampling trigger mode of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param new_state: new state of ordinary oversampling trigger mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void adc_ordinary_oversample_trig_enable(adc_type *adc_x, confirm_state new_state) +{ + adc_x->ovsp_bit.oostren = new_state; +} + +/** + * @brief set ordinary oversample restart mode of the specified adc peripheral. + * @param adc_x: select the adc peripheral. + * this parameter can be one of the following values: + * - ADC1, ADC2, ADC3. + * @param adc_or_oversample_restart: ordinary oversample restart mode. + * this parameter can be one of the following values: + * - ADC_OVERSAMPLE_CONTINUE + * - ADC_OVERSAMPLE_RESTART + * @retval none + */ +void adc_ordinary_oversample_restart_set(adc_type *adc_x, adc_ordinary_oversample_restart_type adc_ordinary_oversample_restart) +{ + adc_x->ovsp_bit.oosrsel = adc_ordinary_oversample_restart; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_can.c b/armlib/at32_sys/drivers/src/at32f435_437_can.c new file mode 100644 index 000000000..29028f8a4 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_can.c @@ -0,0 +1,1244 @@ +/** + ************************************************************************** + * @file at32f435_437_can.c + * @brief contains all the functions for the can firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup CAN + * @brief CAN driver modules + * @{ + */ + +#ifdef CAN_MODULE_ENABLED + +/** @defgroup CAN_private_functions + * @{ + */ + +/** + * @brief deinitialize the can peripheral registers to their default reset values. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @retval none. + */ +void can_reset(can_type* can_x) +{ + if(can_x == CAN1) + { + crm_periph_reset(CRM_CAN1_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_CAN1_PERIPH_RESET, FALSE); + } + else if(can_x == CAN2) + { + crm_periph_reset(CRM_CAN2_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_CAN2_PERIPH_RESET, FALSE); + } +} + +/** + * @brief fill each can_baudrate_struct member with its default value. + * @param can_baudrate_struct: pointer to a can_baudrate_type structure which will be initialized. + * @retval none. + */ +void can_baudrate_default_para_init(can_baudrate_type* can_baudrate_struct) +{ + /* reset can baudrate structure parameters values */ + + /* baud rate division */ + can_baudrate_struct->baudrate_div = 1; + + /* resynchronization adjust width */ + can_baudrate_struct->rsaw_size = CAN_RSAW_2TQ; + + /* bit time segment 1 */ + can_baudrate_struct->bts1_size = CAN_BTS1_4TQ; + + /* bit time segment 2 */ + can_baudrate_struct->bts2_size = CAN_BTS2_3TQ; +} + +/** + * @brief set the baudrate of the can peripheral + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param can_baudrate_struct: pointer to a can_baudrate_type structure which will be set. + * @note baudrate calculate method is: + * baudrate = fpclk/(baudrate_div *(3 + bts1_size + bts2_size)) + * @retval the result of baudrate set + * this parameter can be one of the following values: + * SUCCESS or ERROR + */ +error_status can_baudrate_set(can_type* can_x, can_baudrate_type* can_baudrate_struct) +{ + error_status status_index = ERROR; + uint32_t wait_ack_index = 0x00000000; + /* exit from doze mode */ + can_x->mctrl_bit.dzen = FALSE; + + /* request freeze mode */ + can_x->mctrl_bit.fzen = TRUE; + + /* wait the acknowledge */ + while((!can_x->msts_bit.fzc) && (wait_ack_index != FZC_TIMEOUT)) + { + wait_ack_index++; + } + + /* check acknowledge */ + if(can_x->msts_bit.fzc) + { + can_x->btmg_bit.brdiv = can_baudrate_struct->baudrate_div - 1; + can_x->btmg_bit.rsaw = can_baudrate_struct->rsaw_size; + can_x->btmg_bit.bts1 = can_baudrate_struct->bts1_size; + can_x->btmg_bit.bts2 = can_baudrate_struct->bts2_size; + + /* request leave freeze mode */ + can_x->mctrl_bit.fzen = FALSE; + + /* wait the acknowledge */ + wait_ack_index = 0; + while((can_x->msts_bit.fzc) && (wait_ack_index != FZC_TIMEOUT)) + { + wait_ack_index++; + } + + /* check acknowledged */ + if(can_x->msts_bit.fzc) + { + status_index = ERROR; + } + else + { + status_index = SUCCESS ; + } + } + else + { + status_index = ERROR; + } + + /* return the status of baudrate set */ + return status_index; +} + +/** + * @brief fill each can_init_struct member with its default value. + * @param can_base_struct: pointer to a can_base_type structure which will be initialized. + * @retval none. + */ +void can_default_para_init(can_base_type* can_base_struct) +{ + /* reset can init structure parameters values */ + + /* initialize the time triggered communication mode */ + can_base_struct->ttc_enable = FALSE; + + /* initialize the automatic exit bus-off management */ + can_base_struct->aebo_enable = FALSE; + + /* initialize the automatic exit doze mode */ + can_base_struct->aed_enable = FALSE; + + /* initialize the prohibit retransmission when sending fails */ + can_base_struct->prsf_enable = FALSE; + + /* initialize the message discarding rule select when overflow */ + can_base_struct->mdrsel_selection = CAN_DISCARDING_FIRST_RECEIVED; + + /* initialize the multiple message sending sequence rule */ + can_base_struct->mmssr_selection = CAN_SENDING_BY_ID; + + /* initialize the can_mode */ + can_base_struct->mode_selection = CAN_MODE_COMMUNICATE; +} + +/** + * @brief initialize the can peripheral according to the specified + * parameters in the can_init_struct. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param can_base_struct: pointer to a can_base_struct structure that contains the configuration information for the can peripheral. + * @retval the status of initialization + * this parameter can be one of the following values: + * SUCCESS or ERROR + */ +error_status can_base_init(can_type* can_x, can_base_type* can_base_struct) +{ + error_status init_status_index = ERROR; + uint32_t wait_ack_index = 0x00000000; + /* exit from doze mode */ + can_x->mctrl_bit.dzen = FALSE; + + /* request freeze mode */ + can_x->mctrl_bit.fzen = TRUE; + + /* wait the acknowledge */ + while((!can_x->msts_bit.fzc) && (wait_ack_index != FZC_TIMEOUT)) + { + wait_ack_index++; + } + + /* check acknowledge */ + if(can_x->msts_bit.fzc) + { + /* set the time triggered communication mode */ + can_x->mctrl_bit.ttcen = can_base_struct->ttc_enable; + + /* set the automatic exit bus-off management */ + can_x->mctrl_bit.aeboen = can_base_struct->aebo_enable; + + /* set the automatic automatic exit doze mode */ + can_x->mctrl_bit.aeden = can_base_struct->aed_enable; + + /* set the prohibit retransmission when sending fails */ + can_x->mctrl_bit.prsfen = can_base_struct->prsf_enable; + + /* set the message discarding rule select when overflow */ + can_x->mctrl_bit.mdrsel = can_base_struct->mdrsel_selection; + + /* set the multiple message sending sequence rule */ + can_x->mctrl_bit.mmssr = can_base_struct->mmssr_selection; + + /* set the test mode */ + can_x->btmg_bit.lben = can_base_struct->mode_selection & 0x01; + can_x->btmg_bit.loen = (can_base_struct->mode_selection >> 1) & 0x01; + + /* request leave freeze mode */ + can_x->mctrl_bit.fzen = FALSE; + + /* wait the acknowledge */ + wait_ack_index = 0; + while((can_x->msts_bit.fzc) && (wait_ack_index != FZC_TIMEOUT)) + { + wait_ack_index++; + } + + /* check acknowledged */ + if(can_x->msts_bit.fzc) + { + init_status_index = ERROR; + } + else + { + init_status_index = SUCCESS ; + } + } + else + { + init_status_index = ERROR; + } + + /* return the status of initialization */ + return init_status_index; +} + +/** + * @brief fill each can_filter_init_struct member with its default value. + * @param can_filter_init_struct: pointer to a can_filter_init_type structure which will be initialized. + * @retval none. + */ +void can_filter_default_para_init(can_filter_init_type* can_filter_init_struct) +{ + /* reset can filter init structure parameters values */ + + /* initialize the filter activate state */ + can_filter_init_struct->filter_activate_enable = FALSE; + + /* filter mode */ + can_filter_init_struct->filter_mode = CAN_FILTER_MODE_ID_MASK; + + /* filter relation fifo select */ + can_filter_init_struct->filter_fifo = CAN_FILTER_FIFO0; + + /* filter number select */ + can_filter_init_struct->filter_number = 0; + + /* initialize the filter bit width */ + can_filter_init_struct->filter_bit = CAN_FILTER_16BIT; + + /* initialize the filters filter data bit */ + can_filter_init_struct->filter_id_high = 0; + can_filter_init_struct->filter_id_low = 0; + can_filter_init_struct->filter_mask_high = 0; + can_filter_init_struct->filter_mask_low = 0; +} + +/** + * @brief initialize the can peripheral according to the specified + * parameters in the can_filter_init_struct. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param can_filter_init_struct: pointer to a can_filter_init_type structure that contains the configuration information. + * @retval none. + */ +void can_filter_init(can_type* can_x, can_filter_init_type* can_filter_init_struct) +{ + uint32_t filter_number_bit_pos = 0; + filter_number_bit_pos = ((uint32_t)1) << can_filter_init_struct->filter_number; + /* set the filter turn into configuration condition */ + can_x->fctrl_bit.fcs = TRUE; + + /* filter activate disable */ + can_x->facfg &= ~(uint32_t)filter_number_bit_pos; + + /* filter bit width */ + switch(can_filter_init_struct->filter_bit) + { + case CAN_FILTER_16BIT: + can_x->fbwcfg &= ~(uint32_t)filter_number_bit_pos; + /* first 16-bit identifier and first 16-bit mask or first 16-bit identifier and second 16-bit identifier */ + can_x->ffb[can_filter_init_struct->filter_number].ffdb1 = ((0x0000FFFF & (uint32_t)can_filter_init_struct->filter_mask_low) << 16); + can_x->ffb[can_filter_init_struct->filter_number].ffdb1 |= (0x0000FFFF & (uint32_t)can_filter_init_struct->filter_id_low); + + /* second 16-bit identifier and second 16-bit mask or third 16-bit identifier and fourth 16-bit identifier */ + can_x->ffb[can_filter_init_struct->filter_number].ffdb2 = ((0x0000FFFF & (uint32_t)can_filter_init_struct->filter_mask_high) << 16); + can_x->ffb[can_filter_init_struct->filter_number].ffdb2 |= (0x0000FFFF & (uint32_t)can_filter_init_struct->filter_id_high); + + break; + case CAN_FILTER_32BIT: + can_x->fbwcfg |= filter_number_bit_pos; + /* 32-bit identifier or first 32-bit identifier */ + can_x->ffb[can_filter_init_struct->filter_number].ffdb1 = ((0x0000FFFF & (uint32_t)can_filter_init_struct->filter_id_high) << 16); + can_x->ffb[can_filter_init_struct->filter_number].ffdb1 |= (0x0000FFFF & (uint32_t)can_filter_init_struct->filter_id_low); + + /* 32-bit mask or second 32-bit identifier */ + can_x->ffb[can_filter_init_struct->filter_number].ffdb2 = ((0x0000FFFF & (uint32_t)can_filter_init_struct->filter_mask_high) << 16); + can_x->ffb[can_filter_init_struct->filter_number].ffdb2 |= (0x0000FFFF & (uint32_t)can_filter_init_struct->filter_mask_low); + + break; + default: + break; + } + + /* filter mode */ + switch(can_filter_init_struct->filter_mode) + { + case CAN_FILTER_MODE_ID_MASK: + can_x->fmcfg &= ~(uint32_t)filter_number_bit_pos; + break; + case CAN_FILTER_MODE_ID_LIST: + can_x->fmcfg |= (uint32_t)filter_number_bit_pos; + break; + default: + break; + } + + /* filter relation fifo select */ + switch(can_filter_init_struct->filter_fifo) + { + case CAN_FILTER_FIFO0: + can_x->frf &= ~(uint32_t)filter_number_bit_pos; + break; + case CAN_FILTER_FIFO1: + can_x->frf |= (uint32_t)filter_number_bit_pos; + break; + default: + break; + } + + /* filter activate enable */ + switch(can_filter_init_struct->filter_activate_enable) + { + case TRUE: + can_x->facfg |= (uint32_t)filter_number_bit_pos; + break; + case FALSE: + can_x->facfg &= ~(uint32_t)filter_number_bit_pos; + break; + default: + break; + } + + /* set the filter turn into working condition */ + can_x->fctrl_bit.fcs = FALSE; +} + +/** + * @brief enable or disable the debug transmission prohibit of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param new_state: new state of debug transmission prohibit. + * this parameter can be: TRUE or FALSE. + * @retval none. + */ +void can_debug_transmission_prohibit(can_type* can_x, confirm_state new_state) +{ + can_x->mctrl_bit.ptd = new_state; +} + +/** + * @brief enable or disable time trigger operation communication mode of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1 or CAN2. + * @param new_state : new state of time trigger operation communication mode. + * this parameter can be: TRUE or FALSE. + * @note + * note1: + * when enabled, transmit mailbox time stamp(tmts[15:0]) value is sent in the last two data bytes of + * the 8-byte message: tmts[7:0] in data byte 6 and tmts[15:8] in data byte 7 + * @note + * note2: + * tmdtbl must be programmed as 8 in order time stamp (2 bytes) to be sent over the can bus. + * @retval none + */ +void can_ttc_mode_enable(can_type* can_x, confirm_state new_state) +{ + /* config the ttc mode new_state */ + can_x->mctrl_bit.ttcen = new_state; + + /* config tmtsten bits new_state */ + can_x->tx_mailbox[0].tmc_bit.tmtsten = new_state; + can_x->tx_mailbox[1].tmc_bit.tmtsten = new_state; + can_x->tx_mailbox[2].tmc_bit.tmtsten = new_state; +} + +/** + * @brief fill the transmission message and transmit of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param tx_message_struct: pointer to a structure which contains the message to be trans. + * @retval the number of the mailbox that is used for transmission: + * this parameter can be one of the following values: + * - CAN_TX_MAILBOX0 + * - CAN_TX_MAILBOX1 + * - CAN_TX_MAILBOX2 + * - CAN_TX_STATUS_NO_EMPTY + */ +uint8_t can_message_transmit(can_type* can_x, can_tx_message_type* tx_message_struct) +{ + uint8_t transmit_mailbox = CAN_TX_STATUS_NO_EMPTY; + + /* select one empty transmit mailbox */ + if(can_x->tsts_bit.tm0ef) + { + transmit_mailbox = CAN_TX_MAILBOX0; + } + else if(can_x->tsts_bit.tm1ef) + { + transmit_mailbox = CAN_TX_MAILBOX1; + } + else if(can_x->tsts_bit.tm2ef) + { + transmit_mailbox = CAN_TX_MAILBOX2; + } + else + { + transmit_mailbox = CAN_TX_STATUS_NO_EMPTY; + } + + if(transmit_mailbox != CAN_TX_STATUS_NO_EMPTY) + { + /* set up the id */ + can_x->tx_mailbox[transmit_mailbox].tmi &= 0x00000001; + can_x->tx_mailbox[transmit_mailbox].tmi_bit.tmidsel = tx_message_struct->id_type; + switch(tx_message_struct->id_type) + { + case CAN_ID_STANDARD: + can_x->tx_mailbox[transmit_mailbox].tmi_bit.tmsid = tx_message_struct->standard_id; + break; + case CAN_ID_EXTENDED: + can_x->tx_mailbox[transmit_mailbox].tmi |= (tx_message_struct->extended_id << 3); + break; + default: + break; + } + can_x->tx_mailbox[transmit_mailbox].tmi_bit.tmfrsel = tx_message_struct->frame_type; + /* set up the dlc */ + can_x->tx_mailbox[transmit_mailbox].tmc_bit.tmdtbl = (tx_message_struct->dlc & ((uint8_t)0x0F)); + + /* set up the data field */ + can_x->tx_mailbox[transmit_mailbox].tmdtl = (((uint32_t)tx_message_struct->data[3] << 24) | + ((uint32_t)tx_message_struct->data[2] << 16) | + ((uint32_t)tx_message_struct->data[1] << 8) | + ((uint32_t)tx_message_struct->data[0])); + can_x->tx_mailbox[transmit_mailbox].tmdth = (((uint32_t)tx_message_struct->data[7] << 24) | + ((uint32_t)tx_message_struct->data[6] << 16) | + ((uint32_t)tx_message_struct->data[5] << 8) | + ((uint32_t)tx_message_struct->data[4])); + + /* request transmission */ + can_x->tx_mailbox[transmit_mailbox].tmi_bit.tmsr = TRUE; + } + return transmit_mailbox; +} + +/** + * @brief check the transmission state of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1 or CAN2. + * @param transmit_mailbox: the number of the mailbox that is used for transmission. + * this parameter can be one of the following values: + * - CAN_TX_MAILBOX0 + * - CAN_TX_MAILBOX1 + * - CAN_TX_MAILBOX2 + * @retval can transmit status + * this parameter can be one of the following values: + * - CAN_TX_STATUS_SUCCESSFUL + * - CAN_TX_STATUS_FAILED + * - CAN_TX_STATUS_PENDING + */ +can_transmit_status_type can_transmit_status_get(can_type* can_x, can_tx_mailbox_num_type transmit_mailbox) +{ + can_transmit_status_type state_index = CAN_TX_STATUS_FAILED; + switch(transmit_mailbox) + { + case CAN_TX_MAILBOX0: + if(can_x->tsts_bit.tm0tcf != RESET) + { + if(can_x->tsts_bit.tm0tsf != RESET) + { + state_index = CAN_TX_STATUS_SUCCESSFUL; + } + else + { + state_index = CAN_TX_STATUS_FAILED; + } + } + else + { + state_index = CAN_TX_STATUS_PENDING; + } + break; + case CAN_TX_MAILBOX1: + if(can_x->tsts_bit.tm1tcf != RESET) + { + if(can_x->tsts_bit.tm1tsf != RESET) + { + state_index = CAN_TX_STATUS_SUCCESSFUL; + } + else + { + state_index = CAN_TX_STATUS_FAILED; + } + } + else + { + state_index = CAN_TX_STATUS_PENDING; + } + break; + case CAN_TX_MAILBOX2: + if(can_x->tsts_bit.tm2tcf != RESET) + { + if(can_x->tsts_bit.tm2tsf != RESET) + { + state_index = CAN_TX_STATUS_SUCCESSFUL; + } + else + { + state_index = CAN_TX_STATUS_FAILED; + } + } + else + { + state_index = CAN_TX_STATUS_PENDING; + } + break; + default: + state_index = CAN_TX_STATUS_FAILED; + break; + } + return state_index; +} + +/** + * @brief cancel a transmit request of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1 or CAN2. + * @param mailbox: mailbox number. + * this parameter can be one of the following values: + * - CAN_TX_MAILBOX0 + * - CAN_TX_MAILBOX1 + * - CAN_TX_MAILBOX2 + * @retval none. + */ +void can_transmit_cancel(can_type* can_x, can_tx_mailbox_num_type transmit_mailbox) +{ + uint32_t transmit_cancel_bit = 0; + transmit_cancel_bit = can_x->tsts & (CAN_TSTS_TM0CT_VAL | CAN_TSTS_TM1CT_VAL | CAN_TSTS_TM2CT_VAL); + switch (transmit_mailbox) + { + case CAN_TX_MAILBOX0: + can_x->tsts = transmit_cancel_bit | CAN_TSTS_TM0CT_VAL; + break; + case CAN_TX_MAILBOX1: + can_x->tsts = transmit_cancel_bit | CAN_TSTS_TM1CT_VAL; + break; + case CAN_TX_MAILBOX2: + can_x->tsts = transmit_cancel_bit | CAN_TSTS_TM2CT_VAL; + break; + default: + break; + } +} + +/** + * @brief receive message of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param fifo_number: receive fifo number. + * this parameter can be one of the following values: + * - CAN_RX_FIFO0 + * - CAN_RX_FIFO1 + * @param rx_message_struct: pointer to a structure which store the receive message. + * @retval none. + */ +void can_message_receive(can_type* can_x, can_rx_fifo_num_type fifo_number, can_rx_message_type* rx_message_struct) +{ + /* get the id type */ + rx_message_struct->id_type = (can_identifier_type)can_x->fifo_mailbox[fifo_number].rfi_bit.rfidi; + switch (rx_message_struct->id_type) + { + case CAN_ID_STANDARD: + rx_message_struct->standard_id = can_x->fifo_mailbox[fifo_number].rfi_bit.rfsid; + break; + case CAN_ID_EXTENDED: + rx_message_struct->extended_id = 0x1FFFFFFF & (can_x->fifo_mailbox[fifo_number].rfi >> 3); + break; + default: + break; + } + rx_message_struct->frame_type = (can_trans_frame_type)can_x->fifo_mailbox[fifo_number].rfi_bit.rffri; + /* get the dlc */ + rx_message_struct->dlc = can_x->fifo_mailbox[fifo_number].rfc_bit.rfdtl; + + /* get the filter match number */ + rx_message_struct->filter_index = can_x->fifo_mailbox[fifo_number].rfc_bit.rffmn; + + /* get the data field */ + rx_message_struct->data[0] = can_x->fifo_mailbox[fifo_number].rfdtl_bit.rfdt0; + rx_message_struct->data[1] = can_x->fifo_mailbox[fifo_number].rfdtl_bit.rfdt1; + rx_message_struct->data[2] = can_x->fifo_mailbox[fifo_number].rfdtl_bit.rfdt2; + rx_message_struct->data[3] = can_x->fifo_mailbox[fifo_number].rfdtl_bit.rfdt3; + rx_message_struct->data[4] = can_x->fifo_mailbox[fifo_number].rfdth_bit.rfdt4; + rx_message_struct->data[5] = can_x->fifo_mailbox[fifo_number].rfdth_bit.rfdt5; + rx_message_struct->data[6] = can_x->fifo_mailbox[fifo_number].rfdth_bit.rfdt6; + rx_message_struct->data[7] = can_x->fifo_mailbox[fifo_number].rfdth_bit.rfdt7; + + /* release the fifo */ + can_receive_fifo_release(can_x, fifo_number); +} + +/** + * @brief release the specified fifo of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param fifo_number: fifo to be release. + * this parameter can be one of the following values: + * - CAN_RX_FIFO0 + * - CAN_RX_FIFO1 + * @retval none. + */ +void can_receive_fifo_release(can_type* can_x, can_rx_fifo_num_type fifo_number) +{ + switch (fifo_number) + { + case CAN_RX_FIFO0: + can_x->rf0 = CAN_RF0_RF0R_VAL; + break; + case CAN_RX_FIFO1: + can_x->rf1 = CAN_RF1_RF1R_VAL; + break; + default: + break; + } +} + +/** + * @brief return the number of pending messages of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param fifo_number: receive fifo number. + * this parameter can be one of the following values: + * - CAN_RX_FIFO0 + * - CAN_RX_FIFO1 + * @retval the number of message pending in the receive fifo. + */ +uint8_t can_receive_message_pending_get(can_type* can_x, can_rx_fifo_num_type fifo_number) +{ + uint8_t message_pending = 0; + switch (fifo_number) + { + case CAN_RX_FIFO0: + message_pending = can_x->rf0_bit.rf0mn; + break; + case CAN_RX_FIFO1: + message_pending = can_x->rf1_bit.rf1mn; + break; + default: + break; + } + return message_pending; +} + +/** + * @brief set the operation mode of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param can_operating_mode: can operating mode. + * this parameter can be one of the following values: + * - CAN_OPERATINGMODE_FREEZE + * - CAN_OPERATINGMODE_DOZE + * - CAN_OPERATINGMODE_COMMUNICATE + * @retval status of operation mode set + * this parameter can be one of the following values: + * SUCCESS or ERROR + */ +error_status can_operating_mode_set(can_type* can_x, can_operating_mode_type can_operating_mode) +{ + error_status status = ERROR; + uint32_t time_out_index = FZC_TIMEOUT; + + if (can_operating_mode == CAN_OPERATINGMODE_FREEZE) + { + /* request enter freeze mode */ + can_x->mctrl_bit.dzen = FALSE; + can_x->mctrl_bit.fzen = TRUE; + + while(((can_x->msts_bit.dzc) || (!can_x->msts_bit.fzc)) && (time_out_index != 0)) + { + time_out_index--; + } + if((can_x->msts_bit.dzc) || (!can_x->msts_bit.fzc)) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + else if(can_operating_mode == CAN_OPERATINGMODE_DOZE) + { + /* request enter doze mode */ + can_x->mctrl_bit.dzen = TRUE; + can_x->mctrl_bit.fzen = FALSE; + + while(((!can_x->msts_bit.dzc) || (can_x->msts_bit.fzc)) && (time_out_index != 0)) + { + time_out_index--; + } + if((!can_x->msts_bit.dzc) || (can_x->msts_bit.fzc)) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + else if(can_operating_mode == CAN_OPERATINGMODE_COMMUNICATE) + { + /* request enter normal mode */ + can_x->mctrl_bit.dzen = FALSE; + can_x->mctrl_bit.fzen = FALSE; + + while(((can_x->msts_bit.dzc) || (can_x->msts_bit.fzc)) && (time_out_index != 0)) + { + time_out_index--; + } + if((can_x->msts_bit.dzc) || (can_x->msts_bit.fzc)) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + } + else + { + status = ERROR; + } + return status; +} + +/** + * @brief enter the low power mode of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @retval status of doze mode enter, the returned value can be: + * - CAN_ENTER_DOZE_SUCCESSFUL + * - CAN_ENTER_DOZE_FAILED + */ +can_enter_doze_status_type can_doze_mode_enter(can_type* can_x) +{ + can_enter_doze_status_type status = CAN_ENTER_DOZE_FAILED; + uint32_t time_out_index = FZC_TIMEOUT; + can_x->mctrl_bit.fzen = FALSE; + can_x->mctrl_bit.dzen = TRUE; + while(((!can_x->msts_bit.dzc) || (can_x->msts_bit.fzc)) && (time_out_index != 0)) + { + time_out_index--; + } + if((!can_x->msts_bit.dzc) || (can_x->msts_bit.fzc)) + { + status = CAN_ENTER_DOZE_FAILED; + } + else + { + status = CAN_ENTER_DOZE_SUCCESSFUL; + } + return status; +} + +/** + * @brief exit the doze mode of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @retval status of doze mode enter, the returned value can be: + * - CAN_QUIT_DOZE_SUCCESSFUL + * - CAN_QUIT_DOZE_FAILED + */ +can_quit_doze_status_type can_doze_mode_exit(can_type* can_x) +{ + can_quit_doze_status_type status = CAN_QUIT_DOZE_FAILED; + uint32_t time_out_index = DZC_TIMEOUT; + can_x->mctrl_bit.dzen = FALSE; + while((can_x->msts_bit.dzc) && (time_out_index != 0)) + { + time_out_index--; + } + if(!can_x->msts_bit.dzc) + { + status = CAN_QUIT_DOZE_SUCCESSFUL; + } + return status; +} + +/** + * @brief return the error type record (etr) of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @retval the value of the error code + * the return can be one of the follow values: + * - CAN_ERRORRECORD_NOERR + * - CAN_ERRORRECORD_STUFFERR, + * - CAN_ERRORRECORD_FORMERR, + * - CAN_ERRORRECORD_ACKERR, + * - CAN_ERRORRECORD_BITRECESSIVEERR, + * - CAN_ERRORRECORD_BITDOMINANTERR, + * - CAN_ERRORRECORD_CRCERR, + * - CAN_ERRORRECORD_SOFTWARESETERR + */ +can_error_record_type can_error_type_record_get(can_type* can_x) +{ + can_error_record_type error_code = CAN_ERRORRECORD_NOERR; + + error_code = (can_error_record_type)can_x->ests_bit.etr; + return error_code; +} + +/** + * @brief return the receive error counter (rec) of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @retval the value of receive error counter. + */ +uint8_t can_receive_error_counter_get(can_type* can_x) +{ + uint8_t counter = 0; + counter = can_x->ests_bit.rec; + return counter; +} + +/** + * @brief return the transmit error counter of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @retval the value of transmit error counter. + */ +uint8_t can_transmit_error_counter_get(can_type* can_x) +{ + uint8_t counter = 0; + counter = can_x->ests_bit.tec; + return counter; +} + +/** + * @brief enable or disable the interrupt of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param can_int: specifies the can interrupt sources to be enabled or disabled. + * this parameter can be one of the following values: + * - CAN_TCIEN_INT + * - CAN_RF0MIEN_INT + * - CAN_RF0FIEN_INT + * - CAN_RF0OIEN_INT + * - CAN_RF1MIEN_INT + * - CAN_RF1FIEN_INT + * - CAN_RF1OIEN_INT + * - CAN_EAIEN_INT + * - CAN_EPIEN_INT + * - CAN_BOIEN_INT + * - CAN_ETRIEN_INT + * - CAN_EOIEN_INT + * - CAN_QDZIEN_INT + * - CAN_EDZIEN_INT + * @param new_state: new state of the can interrupts. + * this parameter can be: TRUE or FALSE. + * @retval none. + */ +void can_interrupt_enable(can_type* can_x, uint32_t can_int, confirm_state new_state) +{ + if (new_state != FALSE) + { + can_x->inten |= can_int; + } + else + { + can_x->inten &= ~can_int; + } +} + +/** + * @brief get interrupt flag of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param can_flag: select the flag. + * this parameter can be one of the following flags: + * - CAN_EAF_FLAG + * - CAN_EPF_FLAG + * - CAN_BOF_FLAG + * - CAN_ETR_FLAG + * - CAN_EOIF_FLAG + * - CAN_TM0TCF_FLAG + * - CAN_TM1TCF_FLAG + * - CAN_TM2TCF_FLAG + * - CAN_RF0MN_FLAG + * - CAN_RF0FF_FLAG + * - CAN_RF0OF_FLAG + * - CAN_RF1MN_FLAG + * - CAN_RF1FF_FLAG + * - CAN_RF1OF_FLAG + * - CAN_QDZIF_FLAG + * - CAN_EDZC_FLAG + * - CAN_TMEF_FLAG + * note:the state of CAN_EDZC_FLAG need to check dzc and edzif bit + * note:the state of CAN_TMEF_FLAG need to check rqc0,rqc1 and rqc2 bit + * @retval status of can_flag, the returned value can be:SET or RESET. + */ +flag_status can_interrupt_flag_get(can_type* can_x, uint32_t can_flag) +{ + flag_status bit_status = RESET; + flag_status int_status = RESET; + + switch(can_flag) + { + case CAN_EAF_FLAG: + int_status = (flag_status)(can_x->inten_bit.eoien && can_x->inten_bit.eaien); + break; + case CAN_EPF_FLAG: + int_status = (flag_status)(can_x->inten_bit.eoien && can_x->inten_bit.epien); + break; + case CAN_BOF_FLAG: + int_status = (flag_status)(can_x->inten_bit.eoien && can_x->inten_bit.boien); + break; + case CAN_ETR_FLAG: + int_status = (flag_status)(can_x->inten_bit.eoien && can_x->inten_bit.etrien); + break; + case CAN_EOIF_FLAG: + int_status = (flag_status)can_x->inten_bit.eoien; + break; + case CAN_TM0TCF_FLAG: + case CAN_TM1TCF_FLAG: + case CAN_TM2TCF_FLAG: + int_status = (flag_status)can_x->inten_bit.tcien; + break; + case CAN_RF0MN_FLAG: + int_status = (flag_status)can_x->inten_bit.rf0mien; + break; + case CAN_RF0FF_FLAG: + int_status = (flag_status)can_x->inten_bit.rf0fien; + break; + case CAN_RF0OF_FLAG: + int_status = (flag_status)can_x->inten_bit.rf0oien; + break; + case CAN_RF1MN_FLAG: + int_status = (flag_status)can_x->inten_bit.rf1mien; + break; + case CAN_RF1FF_FLAG: + int_status = (flag_status)can_x->inten_bit.rf1fien; + break; + case CAN_RF1OF_FLAG: + int_status = (flag_status)can_x->inten_bit.rf1oien; + break; + case CAN_QDZIF_FLAG: + int_status = (flag_status)can_x->inten_bit.qdzien; + break; + case CAN_EDZC_FLAG: + int_status = (flag_status)can_x->inten_bit.edzien; + break; + case CAN_TMEF_FLAG: + int_status = (flag_status)can_x->inten_bit.tcien; + break; + default: + int_status = RESET; + break; + } + + if(int_status != SET) + { + return RESET; + } + bit_status = can_flag_get(can_x, can_flag); + + return bit_status; +} + +/** + * @brief get flag of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param can_flag: select the flag. + * this parameter can be one of the following flags: + * - CAN_EAF_FLAG + * - CAN_EPF_FLAG + * - CAN_BOF_FLAG + * - CAN_ETR_FLAG + * - CAN_EOIF_FLAG + * - CAN_TM0TCF_FLAG + * - CAN_TM1TCF_FLAG + * - CAN_TM2TCF_FLAG + * - CAN_RF0MN_FLAG + * - CAN_RF0FF_FLAG + * - CAN_RF0OF_FLAG + * - CAN_RF1MN_FLAG + * - CAN_RF1FF_FLAG + * - CAN_RF1OF_FLAG + * - CAN_QDZIF_FLAG + * - CAN_EDZC_FLAG + * - CAN_TMEF_FLAG + * note:the state of CAN_EDZC_FLAG need to check dzc and edzif bit + * note:the state of CAN_TMEF_FLAG need to check rqc0,rqc1 and rqc2 bit + * @retval status of can_flag, the returned value can be:SET or RESET. + */ +flag_status can_flag_get(can_type* can_x, uint32_t can_flag) +{ + flag_status bit_status = RESET; + switch(can_flag) + { + case CAN_EAF_FLAG: + bit_status = (flag_status)can_x->ests_bit.eaf; + break; + case CAN_EPF_FLAG: + bit_status = (flag_status)can_x->ests_bit.epf; + break; + case CAN_BOF_FLAG: + bit_status = (flag_status)can_x->ests_bit.bof; + break; + case CAN_ETR_FLAG: + if(can_x->ests_bit.etr != 0) + { + bit_status = SET; + } + else + { + bit_status = RESET; + } + break; + case CAN_EOIF_FLAG: + bit_status = (flag_status)can_x->msts_bit.eoif; + break; + case CAN_TM0TCF_FLAG: + bit_status = (flag_status)can_x->tsts_bit.tm0tcf; + break; + case CAN_TM1TCF_FLAG: + bit_status = (flag_status)can_x->tsts_bit.tm1tcf; + break; + case CAN_TM2TCF_FLAG: + bit_status = (flag_status)can_x->tsts_bit.tm2tcf; + break; + case CAN_RF0MN_FLAG: + if(can_x->rf0_bit.rf0mn != 0) + { + bit_status = SET; + } + else + { + bit_status = RESET; + } + break; + case CAN_RF0FF_FLAG: + bit_status = (flag_status)can_x->rf0_bit.rf0ff; + break; + case CAN_RF0OF_FLAG: + bit_status = (flag_status)can_x->rf0_bit.rf0of; + break; + case CAN_RF1MN_FLAG: + if(can_x->rf1_bit.rf1mn != 0) + { + bit_status = SET; + } + else + { + bit_status = RESET; + } + break; + case CAN_RF1FF_FLAG: + bit_status = (flag_status)can_x->rf1_bit.rf1ff; + break; + case CAN_RF1OF_FLAG: + bit_status = (flag_status)can_x->rf1_bit.rf1of; + break; + case CAN_QDZIF_FLAG: + bit_status = (flag_status)can_x->msts_bit.qdzif; + break; + case CAN_EDZC_FLAG: + if((can_x->msts_bit.dzc != RESET) ||(can_x->msts_bit.edzif != RESET)) + { + bit_status = SET; + } + else + { + bit_status = RESET; + } + break; + case CAN_TMEF_FLAG: + if((can_x->tsts_bit.tm0ef != RESET) || (can_x->tsts_bit.tm1ef != RESET) || (can_x->tsts_bit.tm2ef != RESET)) + { + bit_status = SET; + } + else + { + bit_status = RESET; + } + break; + default: + bit_status = RESET; + break; + } + return bit_status; +} + +/** + * @brief clear flag of the specified can peripheral. + * @param can_x: select the can peripheral. + * this parameter can be one of the following values: + * CAN1,CAN2. + * @param can_flag: select the flag. + * this parameter can be one of the following flags: + * - CAN_EAF_FLAG + * - CAN_EPF_FLAG + * - CAN_BOF_FLAG + * - CAN_ETR_FLAG + * - CAN_EOIF_FLAG + * - CAN_TM0TCF_FLAG + * - CAN_TM1TCF_FLAG + * - CAN_TM2TCF_FLAG + * - CAN_RF0FF_FLAG + * - CAN_RF0OF_FLAG + * - CAN_RF1FF_FLAG + * - CAN_RF1OF_FLAG + * - CAN_QDZIF_FLAG + * - CAN_EDZC_FLAG + * - CAN_TMEF_FLAG + * note:CAN_RF0MN_FLAG and CAN_RF1MN_FLAG can not clear by this function + * @retval none. + */ +void can_flag_clear(can_type* can_x, uint32_t can_flag) +{ + switch(can_flag) + { + case CAN_EAF_FLAG: + case CAN_EPF_FLAG: + case CAN_BOF_FLAG: + case CAN_EOIF_FLAG: + can_x->msts = CAN_MSTS_EOIF_VAL; + break; + case CAN_ETR_FLAG: + can_x->msts = CAN_MSTS_EOIF_VAL; + can_x->ests = 0; + break; + case CAN_TM0TCF_FLAG: + can_x->tsts = CAN_TSTS_TM0TCF_VAL; + break; + case CAN_TM1TCF_FLAG: + can_x->tsts = CAN_TSTS_TM1TCF_VAL; + break; + case CAN_TM2TCF_FLAG: + can_x->tsts = CAN_TSTS_TM2TCF_VAL; + break; + case CAN_RF0FF_FLAG: + can_x->rf0 = CAN_RF0_RF0FF_VAL; + break; + case CAN_RF0OF_FLAG: + can_x->rf0 = CAN_RF0_RF0OF_VAL; + break; + case CAN_RF1FF_FLAG: + can_x->rf1 = CAN_RF1_RF1FF_VAL; + break; + case CAN_RF1OF_FLAG: + can_x->rf1 = CAN_RF1_RF1OF_VAL; + break; + case CAN_QDZIF_FLAG: + can_x->msts = CAN_MSTS_QDZIF_VAL; + break; + case CAN_EDZC_FLAG: + can_x->msts = CAN_MSTS_EDZIF_VAL; + break; + case CAN_TMEF_FLAG: + can_x->tsts = CAN_TSTS_TM0TCF_VAL | CAN_TSTS_TM1TCF_VAL | CAN_TSTS_TM2TCF_VAL; + break; + default: + break; + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_crc.c b/armlib/at32_sys/drivers/src/at32f435_437_crc.c new file mode 100644 index 000000000..1dd90c835 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_crc.c @@ -0,0 +1,208 @@ +/** + ************************************************************************** + * @file at32f435_437_crc.c + * @brief contains all the functions for the crc firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup CRC + * @brief CRC driver modules + * @{ + */ + +#ifdef CRC_MODULE_ENABLED + +/** @defgroup CRC_private_functions + * @{ + */ + +/** + * @brief reset the crc data register. + * @param none + * @retval none + */ +void crc_data_reset(void) +{ + /* reset crc generator */ + CRC->ctrl_bit.rst = 0x1; +} + +/** + * @brief compute the 32-bit crc of a given data word(32-bit). + * @param data: data word(32-bit) to compute its crc + * @retval 32-bit crc + */ +uint32_t crc_one_word_calculate(uint32_t data) +{ + CRC->dt = data; + return (CRC->dt); +} + +/** + * @brief compute the 32-bit crc of a given buffer of data word(32-bit). + * @param pbuffer: pointer to the buffer containing the data to be computed + * @param length: length of the buffer to be computed + * @retval 32-bit crc + */ +uint32_t crc_block_calculate(uint32_t *pbuffer, uint32_t length) +{ + uint32_t index = 0; + + for(index = 0; index < length; index++) + { + CRC->dt = pbuffer[index]; + } + + return (CRC->dt); +} + +/** + * @brief return the current crc value. + * @param none + * @retval 32-bit crc + */ +uint32_t crc_data_get(void) +{ + return (CRC->dt); +} + +/** + * @brief store a 8-bit data in the common data register. + * @param cdt_value: 8-bit value to be stored in the common data register + * @retval none + */ +void crc_common_data_set(uint8_t cdt_value) +{ + CRC->cdt_bit.cdt = cdt_value; +} + +/** + * @brief return the 8-bit data stored in the common data register + * @param none + * @retval 8-bit value of the common data register + */ +uint8_t crc_common_data_get(void) +{ + return (CRC->cdt_bit.cdt); +} + +/** + * @brief set the 32-bit initial data of crc + * @param value: initial data + * @retval none + */ +void crc_init_data_set(uint32_t value) +{ + CRC->idt = value; +} + +/** + * @brief control the reversal of the bit order in the input data + * @param value + * this parameter can be one of the following values: + * - CRC_REVERSE_INPUT_NO_AFFECTE + * - CRC_REVERSE_INPUT_BY_BYTE + * - CRC_REVERSE_INPUT_BY_HALFWORD + * - CRC_REVERSE_INPUT_BY_WORD + * @retval none. + */ +void crc_reverse_input_data_set(crc_reverse_input_type value) +{ + CRC->ctrl_bit.revid = value; +} + +/** + * @brief control the reversal of the bit order in the output data + * @param value + * this parameter can be one of the following values: + * - CRC_REVERSE_OUTPUT_NO_AFFECTE + * - CRC_REVERSE_OUTPUT_DATA + * @retval none. + */ +void crc_reverse_output_data_set(crc_reverse_output_type value) +{ + CRC->ctrl_bit.revod = value; +} + +/** + * @brief config crc polynomial value + * @param value + * 32-bit new data of crc poly value + * @retval none. + */ +void crc_poly_value_set(uint32_t value) +{ + CRC->poly = value; +} + +/** + * @brief return crc polynomial value + * @param none + * @retval 32-bit value of the polynomial value. + */ +uint32_t crc_poly_value_get(void) +{ + return (CRC->poly); +} + +/** + * @brief config crc polynomial data size + * @param size + * this parameter can be one of the following values: + * - CRC_POLY_SIZE_32B + * - CRC_POLY_SIZE_16B + * - CRC_POLY_SIZE_8B + * - CRC_POLY_SIZE_7B + * @retval none. + */ +void crc_poly_size_set(crc_poly_size_type size) +{ + CRC->ctrl_bit.poly_size = size; +} + +/** + * @brief return crc polynomial data size + * @param none + * @retval polynomial data size. + */ +crc_poly_size_type crc_poly_size_get(void) +{ + return (crc_poly_size_type)(CRC->ctrl_bit.poly_size); +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_crm.c b/armlib/at32_sys/drivers/src/at32f435_437_crm.c new file mode 100644 index 000000000..e15082163 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_crm.c @@ -0,0 +1,1061 @@ +/** + ************************************************************************** + * @file at32f435_437_crm.c + * @brief contains all the functions for the crm firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_crm.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup CRM + * @brief CRM driver modules + * @{ + */ + +#ifdef CRM_MODULE_ENABLED + +/** @defgroup CRM_private_functions + * @{ + */ + +/** + * @brief reset the crm register + * @param none + * @retval none + */ +void crm_reset(void) +{ + /* reset the crm clock configuration to the default reset state(for debug purpose) */ + /* set hicken bit */ + CRM->ctrl_bit.hicken = TRUE; + + /* wait hick stable */ + while(CRM->ctrl_bit.hickstbl != SET); + + /* hick used as system clock */ + CRM->cfg_bit.sclksel = CRM_SCLK_HICK; + + /* wait sclk switch status */ + while(CRM->cfg_bit.sclksts != CRM_SCLK_HICK); + + /* reset hexten, hextbyps, cfden and pllen bits */ + CRM->ctrl &= ~(0x010D0000U); + + /* reset cfg register, include sclk switch, ahbdiv, apb1div, apb2div, adcdiv, clkout bits */ + CRM->cfg = 0; + + /* reset pllms pllns pllfr pllrcs bits */ + CRM->pllcfg = 0x00033002U; + + /* reset clkout[3], usbbufs, hickdiv, clkoutdiv */ + CRM->misc1 = 0; + + /* disable all interrupts enable and clear pending bits */ + CRM->clkint = 0x009F0000U; +} + +/** + * @brief enable or disable crm low speed external crystal bypass + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_lext_bypass(confirm_state new_state) +{ + CRM->bpdc_bit.lextbyps = new_state; +} + +/** + * @brief enable or disable crm high speed external crystal bypass + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_hext_bypass(confirm_state new_state) +{ + CRM->ctrl_bit.hextbyps = new_state; +} + +/** + * @brief get crm flag status + * @param flag + * this parameter can be one of the following values: + * - CRM_HICK_STABLE_FLAG + * - CRM_HEXT_STABLE_FLAG + * - CRM_PLL_STABLE_FLAG + * - CRM_LEXT_STABLE_FLAG + * - CRM_LICK_STABLE_FLAG + * - CRM_PIN_RESET_FLAG + * - CRM_POR_RESET_FLAG + * - CRM_SW_RESET_FLAG + * - CRM_WDT_RESET_FLAG + * - CRM_WWDT_RESET_FLAG + * - CRM_LOWPOWER_RESET_FLAG + * interrupt flag: + * - CRM_LICK_READY_INT_FLAG + * - CRM_LEXT_READY_INT_FLAG + * - CRM_HICK_READY_INT_FLAG + * - CRM_HEXT_READY_INT_FLAG + * - CRM_PLL_READY_INT_FLAG + * - CRM_CLOCK_FAILURE_INT_FLAG + * @retval flag_status (SET or RESET) + */ +flag_status crm_flag_get(uint32_t flag) +{ + flag_status status = RESET; + if((CRM_REG(flag) & CRM_REG_BIT(flag)) != CRM_REG_BIT(flag)) + { + status = RESET; + } + else + { + status = SET; + } + return status; +} + +/** + * @brief get crm interrupt flag status + * @param flag + * this parameter can be one of the following values: + * - CRM_LICK_READY_INT_FLAG + * - CRM_LEXT_READY_INT_FLAG + * - CRM_HICK_READY_INT_FLAG + * - CRM_HEXT_READY_INT_FLAG + * - CRM_PLL_READY_INT_FLAG + * - CRM_CLOCK_FAILURE_INT_FLAG + * @retval flag_status (SET or RESET) + */ +flag_status crm_interrupt_flag_get(uint32_t flag) +{ + flag_status status = RESET; + switch(flag) + { + case CRM_LICK_READY_INT_FLAG: + if(CRM->clkint_bit.lickstblf && CRM->clkint_bit.lickstblien) + { + status = SET; + } + break; + case CRM_LEXT_READY_INT_FLAG: + if(CRM->clkint_bit.lextstblf && CRM->clkint_bit.lextstblien) + { + status = SET; + } + break; + case CRM_HICK_READY_INT_FLAG: + if(CRM->clkint_bit.hickstblf && CRM->clkint_bit.hickstblien) + { + status = SET; + } + break; + case CRM_HEXT_READY_INT_FLAG: + if(CRM->clkint_bit.hextstblf && CRM->clkint_bit.hextstblien) + { + status = SET; + } + break; + case CRM_PLL_READY_INT_FLAG: + if(CRM->clkint_bit.pllstblf && CRM->clkint_bit.pllstblien) + { + status = SET; + } + break; + case CRM_CLOCK_FAILURE_INT_FLAG: + if(CRM->clkint_bit.cfdf && CRM->ctrl_bit.cfden) + { + status = SET; + } + break; + } + + return status; +} + +/** + * @brief wait for hext stable + * @param none + * @retval error_status (ERROR or SUCCESS) + */ +error_status crm_hext_stable_wait(void) +{ + uint32_t stable_cnt = 0; + error_status status = ERROR; + + while((crm_flag_get(CRM_HEXT_STABLE_FLAG) != SET) && (stable_cnt < HEXT_STARTUP_TIMEOUT)) + { + stable_cnt ++; + } + + if(crm_flag_get(CRM_HEXT_STABLE_FLAG) != SET) + { + status = ERROR; + } + else + { + status = SUCCESS; + } + + return status; +} + +/** + * @brief set the hick trimming value + * @param trim_value (0x00~0x3F) + * @retval none + */ +void crm_hick_clock_trimming_set(uint8_t trim_value) +{ + CRM->ctrl_bit.hicktrim = trim_value; +} + +/** + * @brief set the crm calibration value + * @param cali_value (0x00~0xFF) + * @retval none + */ +void crm_hick_clock_calibration_set(uint8_t cali_value) +{ + /* enable write hick calibration */ + CRM->misc1_bit.hickcal_key = 0x5A; + + /* write hick calibration value */ + CRM->ctrl_bit.hickcal = cali_value; + + /* disable write hick calibration */ + CRM->misc1_bit.hickcal_key = 0x0; +} + +/** + * @brief enable or disable the peripheral clock + * @param value + * this parameter can be one of the following values: + * - CRM_GPIOA_PERIPH_CLOCK - CRM_GPIOB_PERIPH_CLOCK - CRM_GPIOC_PERIPH_CLOCK - CRM_GPIOD_PERIPH_CLOCK + * - CRM_GPIOE_PERIPH_CLOCK - CRM_GPIOF_PERIPH_CLOCK - CRM_GPIOG_PERIPH_CLOCK - CRM_GPIOH_PERIPH_CLOCK + * - CRM_CRC_PERIPH_CLOCK - CRM_EDMA_PERIPH_CLOCK - CRM_DMA1_PERIPH_CLOCK - CRM_DMA2_PERIPH_CLOCK + * - CRM_EMAC_PERIPH_CLOCK - CRM_EMACTX_PERIPH_CLOCK - CRM_EMACRX_PERIPH_CLOCK - CRM_EMACPTP_PERIPH_CLOCK + * - CRM_OTGFS2_PERIPH_CLOCK - CRM_DVP_PERIPH_CLOCK - CRM_OTGFS1_PERIPH_CLOCK - CRM_SDIO1_PERIPH_CLOCK + * - CRM_XMC_PERIPH_CLOCK - CRM_QSPI1_PERIPH_CLOCK - CRM_QSPI2_PERIPH_CLOCK - CRM_SDIO2_PERIPH_CLOCK + * - CRM_TMR2_PERIPH_CLOCK - CRM_TMR3_PERIPH_CLOCK - CRM_TMR4_PERIPH_CLOCK - CRM_TMR5_PERIPH_CLOCK + * - CRM_TMR6_PERIPH_CLOCK - CRM_TMR7_PERIPH_CLOCK - CRM_TMR12_PERIPH_CLOCK - CRM_TMR13_PERIPH_CLOCK + * - CRM_TMR14_PERIPH_CLOCK - CRM_WWDT_PERIPH_CLOCK - CRM_SPI2_PERIPH_CLOCK - CRM_SPI3_PERIPH_CLOCK + * - CRM_USART2_PERIPH_CLOCK - CRM_USART3_PERIPH_CLOCK - CRM_UART4_PERIPH_CLOCK - CRM_UART5_PERIPH_CLOCK + * - CRM_I2C1_PERIPH_CLOCK - CRM_I2C2_PERIPH_CLOCK - CRM_I2C3_PERIPH_CLOCK - CRM_CAN1_PERIPH_CLOCK + * - CRM_CAN2_PERIPH_CLOCK - CRM_PWC_PERIPH_CLOCK - CRM_DAC_PERIPH_CLOCK - CRM_UART7_PERIPH_CLOCK + * - CRM_UART8_PERIPH_CLOCK - CRM_TMR1_PERIPH_CLOCK - CRM_TMR8_PERIPH_CLOCK - CRM_USART1_PERIPH_CLOCK + * - CRM_USART6_PERIPH_CLOCK - CRM_ADC1_PERIPH_CLOCK - CRM_ADC2_PERIPH_CLOCK - CRM_ADC3_PERIPH_CLOCK + * - CRM_SPI1_PERIPH_CLOCK - CRM_SPI4_PERIPH_CLOCK - CRM_SCFG_PERIPH_CLOCK - CRM_TMR9_PERIPH_CLOCK + * - CRM_TMR10_PERIPH_CLOCK - CRM_TMR11_PERIPH_CLOCK - CRM_TMR20_PERIPH_CLOCK - CRM_ACC_PERIPH_CLOCK + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_periph_clock_enable(crm_periph_clock_type value, confirm_state new_state) +{ + /* enable periph clock */ + if(TRUE == new_state) + { + CRM_REG(value) |= CRM_REG_BIT(value); + } + /* disable periph clock */ + else + { + CRM_REG(value) &= ~(CRM_REG_BIT(value)); + } +} + +/** + * @brief enable or disable the peripheral reset + * @param value + * this parameter can be one of the following values: + * - CRM_GPIOA_PERIPH_RESET - CRM_GPIOB_PERIPH_RESET - CRM_GPIOC_PERIPH_RESET - CRM_GPIOD_PERIPH_RESET + * - CRM_GPIOE_PERIPH_RESET - CRM_GPIOF_PERIPH_RESET - CRM_GPIOG_PERIPH_RESET - CRM_GPIOH_PERIPH_RESET + * - CRM_CRC_PERIPH_RESET - CRM_EDMA_PERIPH_RESET - CRM_DMA1_PERIPH_RESET - CRM_DMA2_PERIPH_RESET + * - CRM_EMAC_PERIPH_RESET - CRM_OTGFS2_PERIPH_RESET - CRM_DVP_PERIPH_RESET - CRM_OTGFS1_PERIPH_RESET + * - CRM_SDIO1_PERIPH_RESET - CRM_XMC_PERIPH_RESET - CRM_QSPI1_PERIPH_RESET - CRM_QSPI2_PERIPH_RESET + * - CRM_SDIO2_PERIPH_RESET - CRM_TMR2_PERIPH_RESET - CRM_TMR3_PERIPH_RESET - CRM_TMR4_PERIPH_RESET + * - CRM_TMR5_PERIPH_RESET - CRM_TMR6_PERIPH_RESET - CRM_TMR7_PERIPH_RESET - CRM_TMR12_PERIPH_RESET + * - CRM_TMR13_PERIPH_RESET - CRM_TMR14_PERIPH_RESET - CRM_WWDT_PERIPH_RESET - CRM_SPI2_PERIPH_RESET + * - CRM_SPI3_PERIPH_RESET - CRM_USART2_PERIPH_RESET - CRM_USART3_PERIPH_RESET - CRM_UART4_PERIPH_RESET + * - CRM_UART5_PERIPH_RESET - CRM_I2C1_PERIPH_RESET - CRM_I2C2_PERIPH_RESET - CRM_I2C3_PERIPH_RESET + * - CRM_CAN1_PERIPH_RESET - CRM_CAN2_PERIPH_RESET - CRM_PWC_PERIPH_RESET - CRM_DAC_PERIPH_RESET + * - CRM_UART7_PERIPH_RESET - CRM_UART8_PERIPH_RESET - CRM_TMR1_PERIPH_RESET - CRM_TMR8_PERIPH_RESET + * - CRM_USART1_PERIPH_RESET - CRM_USART6_PERIPH_RESET - CRM_ADC_PERIPH_RESET - CRM_SPI1_PERIPH_RESET + * - CRM_SPI4_PERIPH_RESET - CRM_SCFG_PERIPH_RESET - CRM_TMR9_PERIPH_RESET - CRM_TMR10_PERIPH_RESET + * - CRM_TMR11_PERIPH_RESET - CRM_TMR20_PERIPH_RESET - CRM_ACC_PERIPH_RESET + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_periph_reset(crm_periph_reset_type value, confirm_state new_state) +{ + /* enable periph reset */ + if(new_state == TRUE) + { + CRM_REG(value) |= (CRM_REG_BIT(value)); + } + /* disable periph reset */ + else + { + CRM_REG(value) &= ~(CRM_REG_BIT(value)); + } +} + +/** + * @brief enable or disable the peripheral clock in lowpower mode + * @param value + * this parameter can be one of the following values: + * - CRM_GPIOA_PERIPH_LOWPOWER - CRM_GPIOB_PERIPH_LOWPOWER - CRM_GPIOC_PERIPH_LOWPOWER - CRM_GPIOD_PERIPH_LOWPOWER + * - CRM_GPIOE_PERIPH_LOWPOWER - CRM_GPIOF_PERIPH_LOWPOWER - CRM_GPIOG_PERIPH_LOWPOWER - CRM_GPIOH_PERIPH_LOWPOWER + * - CRM_CRC_PERIPH_LOWPOWER - CRM_EDMA_PERIPH_LOWPOWER - CRM_DMA1_PERIPH_LOWPOWER - CRM_DMA2_PERIPH_LOWPOWER + * - CRM_EMAC_PERIPH_LOWPOWER - CRM_EMACTX_PERIPH_LOWPOWER - CRM_EMACRX_PERIPH_LOWPOWER - CRM_EMACPTP_PERIPH_LOWPOWER + * - CRM_OTGFS2_PERIPH_LOWPOWER - CRM_DVP_PERIPH_LOWPOWER - CRM_OTGFS1_PERIPH_LOWPOWER - CRM_SDIO1_PERIPH_LOWPOWER + * - CRM_XMC_PERIPH_LOWPOWER - CRM_QSPI1_PERIPH_LOWPOWER - CRM_QSPI2_PERIPH_LOWPOWER - CRM_SDIO2_PERIPH_LOWPOWER + * - CRM_TMR2_PERIPH_LOWPOWER - CRM_TMR3_PERIPH_LOWPOWER - CRM_TMR4_PERIPH_LOWPOWER - CRM_TMR5_PERIPH_LOWPOWER + * - CRM_TMR6_PERIPH_LOWPOWER - CRM_TMR7_PERIPH_LOWPOWER - CRM_TMR12_PERIPH_LOWPOWER - CRM_TMR13_PERIPH_LOWPOWER + * - CRM_TMR14_PERIPH_LOWPOWER - CRM_WWDT_PERIPH_LOWPOWER - CRM_SPI2_PERIPH_LOWPOWER - CRM_SPI3_PERIPH_LOWPOWER + * - CRM_USART2_PERIPH_LOWPOWER - CRM_USART3_PERIPH_LOWPOWER - CRM_UART4_PERIPH_LOWPOWER - CRM_UART5_PERIPH_LOWPOWER + * - CRM_I2C1_PERIPH_LOWPOWER - CRM_I2C2_PERIPH_LOWPOWER - CRM_I2C3_PERIPH_LOWPOWER - CRM_CAN1_PERIPH_LOWPOWER + * - CRM_CAN2_PERIPH_LOWPOWER - CRM_PWC_PERIPH_LOWPOWER - CRM_DAC_PERIPH_LOWPOWER - CRM_UART7_PERIPH_LOWPOWER + * - CRM_UART8_PERIPH_LOWPOWER - CRM_TMR1_PERIPH_LOWPOWER - CRM_TMR8_PERIPH_LOWPOWER - CRM_USART1_PERIPH_LOWPOWER + * - CRM_USART6_PERIPH_LOWPOWER - CRM_ADC1_PERIPH_LOWPOWER - CRM_ADC2_PERIPH_LOWPOWER - CRM_ADC3_PERIPH_LOWPOWER + * - CRM_SPI1_PERIPH_LOWPOWER - CRM_SPI4_PERIPH_LOWPOWER - CRM_SCFG_PERIPH_LOWPOWER - CRM_TMR9_PERIPH_LOWPOWER + * - CRM_TMR10_PERIPH_LOWPOWER - CRM_TMR11_PERIPH_LOWPOWER - CRM_TMR20_PERIPH_LOWPOWER - CRM_ACC_PERIPH_LOWPOWER + * - CRM_FLASH_PERIPH_LOWPOWER - CRM_SRAM1_PERIPH_LOWPOWER - CRM_SRAM2_PERIPH_LOWPOWER + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_periph_lowpower_mode_enable(crm_periph_clock_lowpower_type value, confirm_state new_state) +{ + /* enable periph clock in lowpower mode */ + if(new_state == TRUE) + { + CRM_REG(value) |= (CRM_REG_BIT(value)); + } + /* disable periph clock in lowpower mode */ + else + { + CRM_REG(value) &= ~(CRM_REG_BIT(value)); + } +} + +/** + * @brief enable or disable the crm clock source + * @param source + * this parameter can be one of the following values: + * - CRM_CLOCK_SOURCE_HICK + * - CRM_CLOCK_SOURCE_HEXT + * - CRM_CLOCK_SOURCE_PLL + * - CRM_CLOCK_SOURCE_LEXT + * - CRM_CLOCK_SOURCE_LICK + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_clock_source_enable(crm_clock_source_type source, confirm_state new_state) +{ + switch(source) + { + case CRM_CLOCK_SOURCE_HICK: + CRM->ctrl_bit.hicken = new_state; + break; + case CRM_CLOCK_SOURCE_HEXT: + CRM->ctrl_bit.hexten = new_state; + break; + case CRM_CLOCK_SOURCE_PLL: + CRM->ctrl_bit.pllen = new_state; + break; + case CRM_CLOCK_SOURCE_LEXT: + CRM->bpdc_bit.lexten = new_state; + break; + case CRM_CLOCK_SOURCE_LICK: + CRM->ctrlsts_bit.licken = new_state; + break; + default: break; + } +} + +/** + * @brief clear the crm reset flags + * @param flag + * this parameter can be one of the following values: + * reset flag: + * - CRM_PIN_RESET_FLAG + * - CRM_POR_RESET_FLAG + * - CRM_SW_RESET_FLAG + * - CRM_WDT_RESET_FLAG + * - CRM_WWDT_RESET_FLAG + * - CRM_LOWPOWER_RESET_FLAG + * - CRM_ALL_RESET_FLAG + * interrupt flag: + * - CRM_LICK_READY_INT_FLAG + * - CRM_LEXT_READY_INT_FLAG + * - CRM_HICK_READY_INT_FLAG + * - CRM_HEXT_READY_INT_FLAG + * - CRM_PLL_READY_INT_FLAG + * - CRM_CLOCK_FAILURE_INT_FLAG + * @retval none + */ +void crm_flag_clear(uint32_t flag) +{ + switch(flag) + { + case CRM_NRST_RESET_FLAG: + case CRM_POR_RESET_FLAG: + case CRM_SW_RESET_FLAG: + case CRM_WDT_RESET_FLAG: + case CRM_WWDT_RESET_FLAG: + case CRM_LOWPOWER_RESET_FLAG: + case CRM_ALL_RESET_FLAG: + CRM->ctrlsts_bit.rstfc = TRUE; + while(CRM->ctrlsts_bit.rstfc == TRUE); + break; + case CRM_LICK_READY_INT_FLAG: + CRM->clkint_bit.lickstblfc = TRUE; + break; + case CRM_LEXT_READY_INT_FLAG: + CRM->clkint_bit.lextstblfc = TRUE; + break; + case CRM_HICK_READY_INT_FLAG: + CRM->clkint_bit.hickstblfc = TRUE; + break; + case CRM_HEXT_READY_INT_FLAG: + CRM->clkint_bit.hextstblfc = TRUE; + break; + case CRM_PLL_READY_INT_FLAG: + CRM->clkint_bit.pllstblfc = TRUE; + break; + case CRM_CLOCK_FAILURE_INT_FLAG: + CRM->clkint_bit.cfdfc = TRUE; + break; + default: + break; + } +} + +/** + * @brief select ertc clock + * @param value + * this parameter can be one of the following values: + * - CRM_ERTC_CLOCK_NOCLK + * - CRM_ERTC_CLOCK_LEXT + * - CRM_ERTC_CLOCK_LICK + * - CRM_ERTC_CLOCK_HEXT_DIV_2 + * - CRM_ERTC_CLOCK_HEXT_DIV_3 + * - CRM_ERTC_CLOCK_HEXT_DIV_4 + * - CRM_ERTC_CLOCK_HEXT_DIV_5 + * - CRM_ERTC_CLOCK_HEXT_DIV_6 + * - CRM_ERTC_CLOCK_HEXT_DIV_7 + * - CRM_ERTC_CLOCK_HEXT_DIV_8 + * - CRM_ERTC_CLOCK_HEXT_DIV_9 + * - CRM_ERTC_CLOCK_HEXT_DIV_10 + * - CRM_ERTC_CLOCK_HEXT_DIV_11 + * - CRM_ERTC_CLOCK_HEXT_DIV_12 + * - CRM_ERTC_CLOCK_HEXT_DIV_13 + * - CRM_ERTC_CLOCK_HEXT_DIV_14 + * - CRM_ERTC_CLOCK_HEXT_DIV_15 + * - CRM_ERTC_CLOCK_HEXT_DIV_16 + * - CRM_ERTC_CLOCK_HEXT_DIV_17 + * - CRM_ERTC_CLOCK_HEXT_DIV_18 + * - CRM_ERTC_CLOCK_HEXT_DIV_19 + * - CRM_ERTC_CLOCK_HEXT_DIV_20 + * - CRM_ERTC_CLOCK_HEXT_DIV_21 + * - CRM_ERTC_CLOCK_HEXT_DIV_22 + * - CRM_ERTC_CLOCK_HEXT_DIV_23 + * - CRM_ERTC_CLOCK_HEXT_DIV_24 + * - CRM_ERTC_CLOCK_HEXT_DIV_25 + * - CRM_ERTC_CLOCK_HEXT_DIV_26 + * - CRM_ERTC_CLOCK_HEXT_DIV_27 + * - CRM_ERTC_CLOCK_HEXT_DIV_28 + * - CRM_ERTC_CLOCK_HEXT_DIV_29 + * - CRM_ERTC_CLOCK_HEXT_DIV_30 + * - CRM_ERTC_CLOCK_HEXT_DIV_31 + * @retval none + */ +void crm_ertc_clock_select(crm_ertc_clock_type value) +{ + CRM->cfg_bit.ertcdiv = ((value & 0x1F0) >> 4); + CRM->bpdc_bit.ertcsel = (value & 0xF); +} + +/** + * @brief enable or disable ertc + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_ertc_clock_enable(confirm_state new_state) +{ + CRM->bpdc_bit.ertcen = new_state; +} + +/** + * @brief set crm ahb division + * @param value + * this parameter can be one of the following values: + * - CRM_AHB_DIV_1 + * - CRM_AHB_DIV_2 + * - CRM_AHB_DIV_4 + * - CRM_AHB_DIV_8 + * - CRM_AHB_DIV_16 + * - CRM_AHB_DIV_64 + * - CRM_AHB_DIV_128 + * - CRM_AHB_DIV_256 + * - CRM_AHB_DIV_512 + * @retval none + */ +void crm_ahb_div_set(crm_ahb_div_type value) +{ + CRM->cfg_bit.ahbdiv = value; +} + +/** + * @brief set crm apb1 division + * @note the maximum frequency of APB1/APB2 clock is 144 MHz + * @param value + * this parameter can be one of the following values: + * - CRM_APB1_DIV_1 + * - CRM_APB1_DIV_2 + * - CRM_APB1_DIV_4 + * - CRM_APB1_DIV_8 + * - CRM_APB1_DIV_16 + * @retval none + */ +void crm_apb1_div_set(crm_apb1_div_type value) +{ + CRM->cfg_bit.apb1div = value; +} + +/** + * @brief set crm apb2 division + * @note the maximum frequency of APB1/APB2 clock is 144 MHz + * @param value + * this parameter can be one of the following values: + * - CRM_APB2_DIV_1 + * - CRM_APB2_DIV_2 + * - CRM_APB2_DIV_4 + * - CRM_APB2_DIV_8 + * - CRM_APB2_DIV_16 + * @retval none + */ +void crm_apb2_div_set(crm_apb2_div_type value) +{ + CRM->cfg_bit.apb2div = value; +} + +/** + * @brief set usb division + * @param value + * this parameter can be one of the following values: + * - CRM_USB_DIV_1_5 + * - CRM_USB_DIV_1 + * - CRM_USB_DIV_2_5 + * - CRM_USB_DIV_2 + * - CRM_USB_DIV_3_5 + * - CRM_USB_DIV_3 + * - CRM_USB_DIV_4_5 + * - CRM_USB_DIV_4 + * - CRM_USB_DIV_5_5 + * - CRM_USB_DIV_5 + * - CRM_USB_DIV_6_5 + * - CRM_USB_DIV_6 + * - CRM_USB_DIV_7 + * @retval none + */ +void crm_usb_clock_div_set(crm_usb_div_type value) +{ + CRM->misc2_bit.usbdiv = value; +} + +/** + * @brief enable or disable clock failure detection + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_clock_failure_detection_enable(confirm_state new_state) +{ + CRM->ctrl_bit.cfden = new_state; +} + +/** + * @brief battery powered domain software reset + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_battery_powered_domain_reset(confirm_state new_state) +{ + CRM->bpdc_bit.bpdrst = new_state; +} + +/** + * @brief auto step clock switch enable + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_auto_step_mode_enable(confirm_state new_state) +{ + if(new_state == TRUE) + CRM->misc2_bit.auto_step_en = CRM_AUTO_STEP_MODE_ENABLE; + else + CRM->misc2_bit.auto_step_en = CRM_AUTO_STEP_MODE_DISABLE; +} + +/** + * @brief config hick divider select + * @param value + * this parameter can be one of the following values: + * - CRM_HICK48_DIV6 + * - CRM_HICK48_NODIV + * @retval none + */ +void crm_hick_divider_select(crm_hick_div_6_type value) +{ + CRM->misc1_bit.hickdiv = value; +} + +/** + * @brief hick as system clock frequency select + * @param value + * this parameter can be one of the following values: + * - CRM_HICK_SCLK_8MHZ + * - CRM_HICK_SCLK_48MHZ + * @retval none + */ +void crm_hick_sclk_frequency_select(crm_hick_sclk_frequency_type value) +{ + crm_hick_divider_select(CRM_HICK48_NODIV); + CRM->misc1_bit.hick_to_sclk = value; +} + +/** + * @brief usb 48 mhz clock source select + * @param value + * this parameter can be one of the following values: + * - CRM_USB_CLOCK_SOURCE_PLL + * - CRM_USB_CLOCK_SOURCE_HICK + * @retval none + */ +void crm_usb_clock_source_select(crm_usb_clock_source_type value) +{ + if(value == CRM_USB_CLOCK_SOURCE_HICK) + { + crm_hick_sclk_frequency_select(CRM_HICK_SCLK_48MHZ); + } + CRM->misc1_bit.hick_to_usb = value; +} + +/** + * @brief enable or disable clkout direct to tmr10 channel 1 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_clkout_to_tmr10_enable(confirm_state new_state) +{ + CRM->misc2_bit.clk_to_tmr = new_state; +} + +/** + * @brief config crm pll + * pll_rcs_freq * pll_ns + * pll clock = -------------------------------- + * pll_ms * pll_fr_n + * attemtion: + * 31 <= pll_ns <= 500 + * 1 <= pll_ms <= 15 + * + * pll_rcs_freq + * 2mhz <= ---------------------- <= 16mhz + * pll_ms + * + * pll_rcs_freq * pll_ns + * 500mhz <= -------------------------------- <= 1200mhz + * pll_ms + * @param clock_source + * this parameter can be one of the following values: + * - CRM_PLL_SOURCE_HICK + * - CRM_PLL_SOURCE_HEXT + * @param pll_ns (31~500) + * @param pll_ms (1~15) + * @param pll_fr + * this parameter can be one of the following values: + * - CRM_PLL_FR_1 + * - CRM_PLL_FR_2 + * - CRM_PLL_FR_4 + * - CRM_PLL_FR_8 + * - CRM_PLL_FR_16 + * - CRM_PLL_FR_32 + * @retval none + */ +void crm_pll_config(crm_pll_clock_source_type clock_source, uint16_t pll_ns, \ + uint16_t pll_ms, crm_pll_fr_type pll_fr) +{ + /* config pll clock source */ + if(clock_source == CRM_PLL_SOURCE_HICK) + { + CRM->misc1_bit.hickdiv = CRM_HICK48_NODIV; + } + CRM->pllcfg_bit.pllrcs = clock_source; + + /* config pll multiplication factor */ + CRM->pllcfg_bit.pllns = pll_ns; + CRM->pllcfg_bit.pllms = pll_ms; + CRM->pllcfg_bit.pllfr = pll_fr; +} + +/** + * @brief select system clock source + * @param value + * this parameter can be one of the following values: + * - CRM_SCLK_HICK + * - CRM_SCLK_HEXT + * - CRM_SCLK_PLL + * @retval none + */ +void crm_sysclk_switch(crm_sclk_type value) +{ + CRM->cfg_bit.sclksel = value; + DUMMY_NOP(); +} + +/** + * @brief indicate which clock source is used as system clock + * @param none + * @retval crm_sclk + * this return can be one of the following values: + * - CRM_SCLK_HICK + * - CRM_SCLK_HEXT + * - CRM_SCLK_PLL + */ +crm_sclk_type crm_sysclk_switch_status_get(void) +{ + return (crm_sclk_type)CRM->cfg_bit.sclksts; +} + +/** + * @brief get crm clocks freqency + * @param clocks_struct + * - pointer to the crm_clocks_freq_type structure + * @retval none + */ +void crm_clocks_freq_get(crm_clocks_freq_type *clocks_struct) +{ + uint32_t pll_ns = 0, pll_ms = 0, pll_fr = 0, pll_clock_source = 0, pllrcsfreq = 0; + uint32_t temp = 0, div_value = 0; + crm_sclk_type sclk_source; + + static const uint8_t sclk_ahb_div_table[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + static const uint8_t ahb_apb1_div_table[8] = {0, 0, 0, 0, 1, 2, 3, 4}; + static const uint8_t ahb_apb2_div_table[8] = {0, 0, 0, 0, 1, 2, 3, 4}; + static const uint8_t pll_fr_table[6] = {1, 2, 4, 8, 16, 32}; + + /* get sclk source */ + sclk_source = crm_sysclk_switch_status_get(); + + switch(sclk_source) + { + case CRM_SCLK_HICK: + if(((CRM->misc1_bit.hick_to_sclk) != RESET) && ((CRM->misc1_bit.hickdiv) != RESET)) + clocks_struct->sclk_freq = HICK_VALUE * 6; + else + clocks_struct->sclk_freq = HICK_VALUE; + break; + case CRM_SCLK_HEXT: + clocks_struct->sclk_freq = HEXT_VALUE; + break; + case CRM_SCLK_PLL: + /* get pll clock source */ + pll_clock_source = CRM->pllcfg_bit.pllrcs; + + /* get multiplication factor */ + pll_ns = CRM->pllcfg_bit.pllns; + pll_ms = CRM->pllcfg_bit.pllms; + pll_fr = pll_fr_table[CRM->pllcfg_bit.pllfr]; + + if (pll_clock_source == CRM_PLL_SOURCE_HICK) + { + /* hick selected as pll clock entry */ + pllrcsfreq = HICK_VALUE; + } + else + { + /* hext selected as pll clock entry */ + pllrcsfreq = HEXT_VALUE; + } + + // TODO DXL For fix error: undefined reference to `__aeabi_uldivmod' + // 1. After code review, I found that pll_ns generally does not exceed 144, that is, it can be treated as u32. + // However, for the robustness of firmware, we still need to make error judgments. + if (pllrcsfreq * pll_ns > UINT32_MAX) { + while (1) { + __NOP(); // !!! Fix me !!! + } + } + clocks_struct->sclk_freq = pllrcsfreq * pll_ns / (pll_ms * pll_fr); + // 2. If u64 division is necessary, it is better to link to gcc(-lgcc), but the firmware size will increase. + // clocks_struct->sclk_freq = (uint32_t)(((uint64_t)pllrcsfreq * pll_ns) / (pll_ms * pll_fr)); + break; + default: + clocks_struct->sclk_freq = HICK_VALUE; + break; + } + + /* compute sclk, ahbclk, abp1clk and apb2clk frequencies */ + /* get ahb division */ + temp = CRM->cfg_bit.ahbdiv; + div_value = sclk_ahb_div_table[temp]; + /* ahbclk frequency */ + clocks_struct->ahb_freq = clocks_struct->sclk_freq >> div_value; + + /* get apb1 division */ + temp = CRM->cfg_bit.apb1div; + div_value = ahb_apb1_div_table[temp]; + /* apb1clk frequency */ + clocks_struct->apb1_freq = clocks_struct->ahb_freq >> div_value; + + /* get apb2 division */ + temp = CRM->cfg_bit.apb2div; + div_value = ahb_apb2_div_table[temp]; + /* apb2clk frequency */ + clocks_struct->apb2_freq = clocks_struct->ahb_freq >> div_value; +} + +/** + * @brief set crm clkout1 + * @param clkout + * this parameter can be one of the following values: + * - CRM_CLKOUT1_HICK + * - CRM_CLKOUT1_LEXT + * - CRM_CLKOUT1_HEXT + * - CRM_CLKOUT1_PLL + * @retval none + */ +void crm_clock_out1_set(crm_clkout1_select_type clkout) +{ + CRM->cfg_bit.clkout1_sel = clkout; +} + +/** + * @brief set crm clkout2 + * @param clkout + * this parameter can be one of the following values: + * - CRM_CLKOUT2_SCLK + * - CRM_CLKOUT2_HEXT + * - CRM_CLKOUT2_PLL + * - CRM_CLKOUT2_USB + * - CRM_CLKOUT2_ADC + * - CRM_CLKOUT2_HICK + * - CRM_CLKOUT2_LICK + * - CRM_CLKOUT2_LEXT + * @retval none + */ +void crm_clock_out2_set(crm_clkout2_select_type clkout) +{ + if(clkout < 0x10) + { + CRM->cfg_bit.clkout2_sel1 = (clkout & 0x3); + } + else + { + CRM->cfg_bit.clkout2_sel1 = 0x1; + CRM->misc1_bit.clkout2_sel2 = (clkout & 0xF); + } +} + +/** + * @brief set crm clkout1 division1 + * @param div1 + * this parameter can be one of the following values: + * - CRM_CLKOUT_INDEX_1 + * - CRM_CLKOUT_INDEX_2 + * @param div1 + * this parameter can be one of the following values: + * - CRM_CLKOUT_DIV1_1 + * - CRM_CLKOUT_DIV1_2 + * - CRM_CLKOUT_DIV1_3 + * - CRM_CLKOUT_DIV1_4 + * - CRM_CLKOUT_DIV1_5 + * @param div2 + * this parameter can be one of the following values: + * - CRM_CLKOUT_DIV2_1 + * - CRM_CLKOUT_DIV2_2 + * - CRM_CLKOUT_DIV2_4 + * - CRM_CLKOUT_DIV2_8 + * - CRM_CLKOUT_DIV2_16 + * - CRM_CLKOUT_DIV2_64 + * - CRM_CLKOUT_DIV2_128 + * - CRM_CLKOUT_DIV2_256 + * - CRM_CLKOUT_DIV2_512 + * @retval none + */ +void crm_clkout_div_set(crm_clkout_index_type index, crm_clkout_div1_type div1, crm_clkout_div2_type div2) +{ + if(index == CRM_CLKOUT_INDEX_1) + { + CRM->cfg_bit.clkout1div1 = div1; + CRM->misc1_bit.clkout1div2 = div2; + } + else + { + CRM->cfg_bit.clkout2div1 = div1; + CRM->misc1_bit.clkout2div2 = div2; + } +} + +/** + * @brief set emac output pulse width + * @param width + * this parameter can be one of the following values: + * - CRM_EMAC_PULSE_125MS + * - CRM_EMAC_PULSE_1SCLK + * @retval none + */ +void crm_emac_output_pulse_set(crm_emac_output_pulse_type width) +{ + CRM->misc2_bit.emac_pps_sel = width; +} + +/** + * @brief config crm interrupt + * @param int + * this parameter can be any combination of the following values: + * - CRM_LICK_STABLE_INT + * - CRM_LEXT_STABLE_INT + * - CRM_HICK_STABLE_INT + * - CRM_HEXT_STABLE_INT + * - CRM_PLL_STABLE_INT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void crm_interrupt_enable(uint32_t crm_int, confirm_state new_state) +{ + if(TRUE == new_state) + CRM->clkint |= crm_int; + else + CRM->clkint &= ~crm_int; +} + +/** + * @brief calculate the pll parameters with pll reference clock and target pll output frequency. + * pll_rcs_freq * pll_ns + * pll clock = -------------------------------- + * pll_ms * pll_fr_n + * attemtion: + * 31 <= pll_ns <= 500 + * 1 <= pll_ms <= 15 + * + * pll_rcs_freq + * 2mhz <= ---------------------- <= 16mhz + * pll_ms + * + * pll_rcs_freq * pll_ns + * 500mhz <= -------------------------------- <= 1200mhz + * pll_ms + * @param pll_rcs + * this parameter can be one of the following values: + * - CRM_PLL_SOURCE_HICK + * - CRM_PLL_SOURCE_HEXT + * @param target_sclk_freq: target pll output frequency, such as 200 mhz (target_sclk_freq: 200000000) + * @param ret_ms: pointer to ms value, return the pll_ms of pll parameters + * @param ret_ns: pointer to ns value, return the pll_ns of pll parameters + * @param ret_fr: pointer to fr value, return the pll_fr of pll parameters + * @retval error_status (SUCCESS or ERROR) + */ +error_status crm_pll_parameter_calculate(crm_pll_clock_source_type pll_rcs, uint32_t target_sclk_freq, \ + uint16_t *ret_ms, uint16_t *ret_ns, uint16_t *ret_fr) +{ + uint32_t error_min = 0xFFFFFFFF; + uint32_t pll_rcs_freq = 0, result = 0, absolute_value = 0; + uint16_t ns = 0, ms = 0, ms_min = 0, ms_max = 0; + int16_t fr = 0; + + /* reduce calculate accuracy, target_sclk_freq accuracy with khz */ + target_sclk_freq = target_sclk_freq / 1000; + + /* get pll reference clock frequency, accuracy with khz */ + if(pll_rcs == CRM_PLL_SOURCE_HICK) + pll_rcs_freq = HICK_VALUE / 1000; + else + pll_rcs_freq = HEXT_VALUE / 1000; + + /* polling ms range, accuracy with khz */ + for(ms = 1; ms <= 15; ms ++) + { + result = pll_rcs_freq / ms; + if((result >= 2000U) && (result <= 16000U)) + { + if(ms_min == 0) + ms_min = ms; + + ms_max = ms; + } + } + + /* polling pll parameters */ + for(ms = ms_min; ms <= ms_max; ms ++) + { + for(fr = 5; fr >= 0; fr --) + { + for(ns = 31; ns <= 500; ns ++) + { + result = (pll_rcs_freq * ns) / (ms); + /* check vco frequency range, accuracy with khz */ + if((result < 500000U) || (result > 1200000U)) + { + continue; + } + /* calculate pll output frequency */ + result = result / (0x1 << fr); + /* check frequency */ + if(target_sclk_freq == result) + { + *ret_ms = ms; + *ret_ns = ns; + *ret_fr = (uint16_t)fr; + /* the pll parameters that is equal to target_sclk_freq */ + return SUCCESS; + } + /* calculate error range, accuracy with khz */ + absolute_value = (result > target_sclk_freq) ? (result - target_sclk_freq) : (target_sclk_freq - result); + if(absolute_value < error_min) + { + error_min = absolute_value; + *ret_ms = ms; + *ret_ns = ns; + *ret_fr = (uint16_t)fr; + } + } + } + } + /* the pll parameters that is the closest approach to target_sclk_freq */ + return ERROR; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_dac.c b/armlib/at32_sys/drivers/src/at32f435_437_dac.c new file mode 100644 index 000000000..eab69e080 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_dac.c @@ -0,0 +1,480 @@ +/** + ************************************************************************** + * @file at32f435_437_dac.c + * @brief contains all the functions for the dac firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup DAC + * @brief DAC driver modules + * @{ + */ + +#ifdef DAC_MODULE_ENABLED + +/** @defgroup DAC_private_functions + * @{ + */ + +/** + * @brief dac reset + * @param none + * @retval none + */ +void dac_reset(void) +{ + crm_periph_reset(CRM_DAC_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_DAC_PERIPH_RESET, FALSE); +} + +/** + * @brief enable or disable dac + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dac_enable(dac_select_type dac_select, confirm_state new_state) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->ctrl_bit.d1en = new_state; + break; + case DAC2_SELECT: + DAC->ctrl_bit.d2en = new_state; + break; + default: + break; + } +} + +/** + * @brief enable or disable dac output buffer + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dac_output_buffer_enable(dac_select_type dac_select, confirm_state new_state) +{ + new_state = (confirm_state)!new_state; + switch(dac_select) + { + case DAC1_SELECT: + DAC->ctrl_bit.d1obdis = new_state; + break; + case DAC2_SELECT: + DAC->ctrl_bit.d2obdis = new_state; + break; + default: + break; + } +} + +/** + * @brief enable or disable dac trigger + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dac_trigger_enable(dac_select_type dac_select, confirm_state new_state) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->ctrl_bit.d1trgen = new_state; + break; + case DAC2_SELECT: + DAC->ctrl_bit.d2trgen = new_state; + break; + default: + break; + } +} + +/** + * @brief select dac trigger + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @param dac_trigger_source + * this parameter can be one of the following values: + * - DAC_TMR6_TRGOUT_EVENT + * - DAC_TMR8_TRGOUT_EVENT + * - DAC_TMR7_TRGOUT_EVENT + * - DAC_TMR5_TRGOUT_EVENT + * - DAC_TMR2_TRGOUT_EVENT + * - DAC_TMR4_TRGOUT_EVENT + * - DAC_EXTERNAL_INTERRUPT_LINE_9 + * - DAC_SOFTWARE_TRIGGER + * @retval none + */ +void dac_trigger_select(dac_select_type dac_select, dac_trigger_type dac_trigger_source) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->ctrl_bit.d1trgsel = dac_trigger_source; + break; + case DAC2_SELECT: + DAC->ctrl_bit.d2trgsel = dac_trigger_source; + break; + default: + break; + } +} + +/** + * @brief generate dac software trigger + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @retval none + */ +void dac_software_trigger_generate(dac_select_type dac_select) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->swtrg_bit.d1swtrg = TRUE; + break; + case DAC2_SELECT: + DAC->swtrg_bit.d2swtrg = TRUE; + break; + default: + break; + } +} + +/** + * @brief generate dac dual software trigger synchronously + * @param none + * @retval none + */ +void dac_dual_software_trigger_generate(void) +{ + DAC->swtrg |= 0x03; +} + +/** + * @brief generate dac wave + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @param dac_wave + * this parameter can be one of the following values: + * - DAC_WAVE_GENERATE_NONE + * - DAC_WAVE_GENERATE_NOISE + * - DAC_WAVE_GENERATE_TRIANGLE + * @retval none + */ +void dac_wave_generate(dac_select_type dac_select, dac_wave_type dac_wave) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->ctrl_bit.d1nm = dac_wave; + break; + case DAC2_SELECT: + DAC->ctrl_bit.d2nm = dac_wave; + break; + default: + break; + } +} + +/** + * @brief select dac mask amplitude + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @param dac_mask_amplitude + * this parameter can be one of the following values: + * - DAC_LSFR_BIT0_AMPLITUDE_1 + * - DAC_LSFR_BIT10_AMPLITUDE_3 + * - DAC_LSFR_BIT20_AMPLITUDE_7 + * - DAC_LSFR_BIT30_AMPLITUDE_15 + * - DAC_LSFR_BIT40_AMPLITUDE_31 + * - DAC_LSFR_BIT50_AMPLITUDE_63 + * - DAC_LSFR_BIT60_AMPLITUDE_127 + * - DAC_LSFR_BIT70_AMPLITUDE_255 + * - DAC_LSFR_BIT80_AMPLITUDE_511 + * - DAC_LSFR_BIT90_AMPLITUDE_1023 + * - DAC_LSFR_BITA0_AMPLITUDE_2047 + * - DAC_LSFR_BITB0_AMPLITUDE_4095 + * @retval none + */ +void dac_mask_amplitude_select(dac_select_type dac_select, dac_mask_amplitude_type dac_mask_amplitude) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->ctrl_bit.d1nbsel = dac_mask_amplitude; + break; + case DAC2_SELECT: + DAC->ctrl_bit.d2nbsel = dac_mask_amplitude; + break; + default: + break; + } +} + +/** + * @brief enable or disable dac dma + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dac_dma_enable(dac_select_type dac_select, confirm_state new_state) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->ctrl_bit.d1dmaen = new_state; + break; + case DAC2_SELECT: + DAC->ctrl_bit.d2dmaen = new_state; + break; + default: + break; + } +} + +/** + * @brief get dac data output + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @retval dac channel data output + */ +uint16_t dac_data_output_get(dac_select_type dac_select) +{ + uint16_t data_output =0; + switch(dac_select) + { + case DAC1_SELECT: + data_output = DAC->d1odt_bit.d1odt; + break; + case DAC2_SELECT: + data_output = DAC->d2odt_bit.d2odt; + break; + default: + break; + } + return data_output; +} + +/** + * @brief set dac1 data + * @param dac1_aligned + * this parameter can be one of the following values: + * DAC1_12BIT_RIGHT + * DAC1_12BIT_LEFT + * DAC1_8BIT_RIGHT + * @param dac1_data :indecate from selected data holding register + * @retval none + */ +void dac_1_data_set(dac1_aligned_data_type dac1_aligned, uint16_t dac1_data) +{ + *(__IO uint32_t *) dac1_aligned = dac1_data; +} + +/** + * @brief set dac2 data + * @param dac2_aligned + * this parameter can be one of the following values: + * DAC2_12BIT_RIGHT + * DAC2_12BIT_LEFT + * DAC2_8BIT_RIGHT + * @param dac2_data :indecate from selected data holding register + * @retval none + */ +void dac_2_data_set(dac2_aligned_data_type dac2_aligned, uint16_t dac2_data) +{ + *(__IO uint32_t *) dac2_aligned = dac2_data; +} + +/** + * @brief set dac dual data + * @param dac_dual + * this parameter can be one of the following values: + * DAC_DUAL_12BIT_RIGHT + * DAC_DUAL_12BIT_LEFT + * DAC_DUAL_8BIT_RIGHT + * @param data1 :dac1 channel indecate from selected data holding register + * @param data2 :dac1 channel indecate from selected data holding register + * @retval none + */ +void dac_dual_data_set(dac_dual_data_type dac_dual, uint16_t data1, uint16_t data2) +{ + switch(dac_dual) + { + case DAC_DUAL_12BIT_RIGHT: + *(__IO uint32_t *) dac_dual = (uint32_t)(data1 | (data2 << 16)); + break; + case DAC_DUAL_12BIT_LEFT: + *(__IO uint32_t *) dac_dual = (uint32_t)(data1 | (data2 << 16)); + break; + case DAC_DUAL_8BIT_RIGHT: + *(__IO uint32_t *) dac_dual = (uint32_t)(data1 | (data2 << 8)); + break; + default: + break; + } +} + +/** + * @brief enable/disable dac dma udr interrupt + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dac_udr_enable(dac_select_type dac_select, confirm_state new_state) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->ctrl_bit.d1dmaudrien = new_state; + break; + case DAC2_SELECT: + DAC->ctrl_bit.d2dmaudrien = new_state; + break; + default: + break; + } +} + +/** + * @brief get flag of the dac udr flag. + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @retval the new state of dac udr flag status(SET or RESET). + */ +flag_status dac_udr_flag_get(dac_select_type dac_select) +{ + flag_status status = RESET; + + switch(dac_select) + { + case DAC1_SELECT: + if(DAC->sts_bit.d1dmaudrf != 0) + status = SET; + break; + case DAC2_SELECT: + if(DAC->sts_bit.d2dmaudrf != 0) + status = SET; + break; + default: + break; + } + return status; +} + +/** + * @brief get flag of the dac udr interrupt flag. + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @retval the new state of dac udr flag status(SET or RESET). + */ +flag_status dac_udr_interrupt_flag_get(dac_select_type dac_select) +{ + flag_status status = RESET; + + switch(dac_select) + { + case DAC1_SELECT: + if((DAC->sts_bit.d1dmaudrf && DAC->ctrl_bit.d1dmaudrien) != 0) + status = SET; + break; + case DAC2_SELECT: + if((DAC->sts_bit.d2dmaudrf && DAC->ctrl_bit.d2dmaudrien) != 0) + status = SET; + break; + default: + break; + } + return status; +} + +/** + * @brief clear the dac udr flag. + * @param dac_select + * this parameter can be one of the following values: + * - DAC1_SELECT + * - DAC2_SELECT + * @retval none + */ +void dac_udr_flag_clear(dac_select_type dac_select) +{ + switch(dac_select) + { + case DAC1_SELECT: + DAC->sts = DAC1_D1DMAUDRF; + break; + case DAC2_SELECT: + DAC->sts = DAC2_D2DMAUDRF; + break; + default: + break; + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_debug.c b/armlib/at32_sys/drivers/src/at32f435_437_debug.c new file mode 100644 index 000000000..dcad0d7de --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_debug.c @@ -0,0 +1,133 @@ +/** + ************************************************************************** + * @file at32f435_437_mcudbg.c + * @brief contains all the functions for the mcudbg firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup DEBUG + * @brief DEBUG driver modules + * @{ + */ + +#ifdef DEBUG_MODULE_ENABLED + +/** @defgroup DEBUG_private_functions + * @{ + */ + +/** + * @brief get debug device id + * @param none + * @retval the debug device id + */ +uint32_t debug_device_id_get(void) +{ + return DEBUGMCU->pid; +} +/** + * @brief set periph debug mode + * @param periph_debug_mode + * this parameter can be one of the following values: + * - DEBUG_SLEEP + * - DEBUG_DEEPSLEEP + * - DEBUG_STANDBY + * @param new_state (TRUE or FALSE) + * @retval none + */ +void debug_low_power_mode_set(uint32_t low_power_mode, confirm_state new_state) +{ + if(new_state != FALSE) + { + DEBUGMCU->ctrl |= low_power_mode; + } + else + { + DEBUGMCU->ctrl &= ~low_power_mode; + } +} +/** + * @brief set apb1 periph debug mode + * @param periph_debug_mode + * this parameter can be any combination of the following values: + * - DEBUG_TMR2_PAUSE - DEBUG_TMR3_PAUSE + * - DEBUG_TMR4_PAUSE - DEBUG_TMR5_PAUSE + * - DEBUG_TMR6_PAUSE - DEBUG_TMR7_PAUSE + * - DEBUG_TMR12_PAUSE - DEBUG_TMR13_PAUSE + * - DEBUG_TMR14_PAUSE - DEBUG_ERTC_PAUSE + * - DEBUG_WWDT_PAUSE - DEBUG_WDT_PAUSE + * - DEBUG_ERTC_512_PAUSE - DEBUG_I2C1_SMBUS_TIMEOUT + * - DEBUG_I2C2_SMBUS_TIMEOUT - DEBUG_I2C3_SMBUS_TIMEOUT + * - DEBUG_CAN1_PAUSE - DEBUG_CAN2_PAUSE + * @param new_state (TRUE or FALSE) + * @retval none + */ +void debug_apb1_periph_mode_set(uint32_t apb1_periph, confirm_state new_state) +{ + if(new_state != FALSE) + { + DEBUGMCU->apb1_frz |= apb1_periph; + } + else + { + DEBUGMCU->apb1_frz &= ~apb1_periph; + } +} +/** + * @brief set apb2 periph debug mode + * @param periph_debug_mode + * this parameter can be any combination of the following values: + * - DEBUG_TMR1_PAUSE - DEBUG_TMR8_PAUSE + * - DEBUG_TMR20_PAUSE - DEBUG_TMR9_PAUSE + * - DEBUG_TMR10_PAUSE - DEBUG_TMR11_PAUSE + * @param new_state (TRUE or FALSE) + * @retval none + */ +void debug_apb2_periph_mode_set(uint32_t apb2_periph, confirm_state new_state) +{ + if(new_state != FALSE) + { + DEBUGMCU->apb2_frz |= apb2_periph; + } + else + { + DEBUGMCU->apb2_frz &= ~apb2_periph; + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_dma.c b/armlib/at32_sys/drivers/src/at32f435_437_dma.c new file mode 100644 index 000000000..191fe2804 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_dma.c @@ -0,0 +1,860 @@ +/** + ************************************************************************** + * @file at32f435_437_dma.c + * @brief contains all the functions for the dma firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_dma.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup DMA + * @brief DMA driver modules + * @{ + */ + +#ifdef DMA_MODULE_ENABLED + +/** @defgroup DMA_private_functions + * @{ + */ + +/** + * @brief reset dmax channely register. + * @param dmax_channely: + * this parameter can be one of the following values: + * - DMA1_CHANNEL1 + * - DMA1_CHANNEL2 + * - DMA1_CHANNEL3 + * - DMA1_CHANNEL4 + * - DMA1_CHANNEL5 + * - DMA1_CHANNEL6 + * - DMA1_CHANNEL7 + * - DMA2_CHANNEL1 + * - DMA2_CHANNEL2 + * - DMA2_CHANNEL3 + * - DMA2_CHANNEL4 + * - DMA2_CHANNEL5 + * - DMA2_CHANNEL6 + * - DMA2_CHANNEL7 + * @retval none. + */ +void dma_reset(dma_channel_type *dmax_channely) +{ + uint32_t temp = 0; + dmax_channely->ctrl_bit.chen = FALSE; + dmax_channely->ctrl = 0; + dmax_channely->dtcnt = 0; + dmax_channely->paddr = 0; + dmax_channely->maddr = 0; + + temp = (uint32_t)dmax_channely; + + if((temp & 0x6FF) < 0x608) + { + /* dma1 channel */ + DMA1->clr |= (uint32_t)(0x0F << ((((temp & 0xFF) - 0x08) / 0x14) * 4)); + } + else if((temp & 0x6FF) < 0x688) + { + /* dma2 channel */ + DMA2->clr |= (uint32_t)(0x0F << ((((temp & 0xFF) - 0x08) / 0x14) * 4)); + } +} + +/** + * @brief set the number of data to be transferred. + * @param dmax_channely: + * this parameter can be one of the following values: + * - DMA1_CHANNEL1 + * - DMA1_CHANNEL2 + * - DMA1_CHANNEL3 + * - DMA1_CHANNEL4 + * - DMA1_CHANNEL5 + * - DMA1_CHANNEL6 + * - DMA1_CHANNEL7 + * - DMA2_CHANNEL1 + * - DMA2_CHANNEL2 + * - DMA2_CHANNEL3 + * - DMA2_CHANNEL4 + * - DMA2_CHANNEL5 + * - DMA2_CHANNEL6 + * - DMA2_CHANNEL7 + * @param data_number: the number of data to be transferred (0x0000~0xFFFF). + * @retval none. + */ +void dma_data_number_set(dma_channel_type *dmax_channely, uint16_t data_number) +{ + dmax_channely->dtcnt = data_number; +} + +/** + * @brief get the number of data to be transferred. + * @param dmax_channely: + * this parameter can be one of the following values: + * - DMA1_CHANNEL1 + * - DMA1_CHANNEL2 + * - DMA1_CHANNEL3 + * - DMA1_CHANNEL4 + * - DMA1_CHANNEL5 + * - DMA1_CHANNEL6 + * - DMA1_CHANNEL7 + * - DMA2_CHANNEL1 + * - DMA2_CHANNEL2 + * - DMA2_CHANNEL3 + * - DMA2_CHANNEL4 + * - DMA2_CHANNEL5 + * - DMA2_CHANNEL6 + * - DMA2_CHANNEL7 + * @retval the number value. + */ +uint16_t dma_data_number_get(dma_channel_type *dmax_channely) +{ + return (uint16_t)dmax_channely->dtcnt; +} + +/** + * @brief enable or disable dma interrupt. + * @param dmax_channely: + * this parameter can be one of the following values: + * - DMA1_CHANNEL1 + * - DMA1_CHANNEL2 + * - DMA1_CHANNEL3 + * - DMA1_CHANNEL4 + * - DMA1_CHANNEL5 + * - DMA1_CHANNEL6 + * - DMA1_CHANNEL7 + * - DMA2_CHANNEL1 + * - DMA2_CHANNEL2 + * - DMA2_CHANNEL3 + * - DMA2_CHANNEL4 + * - DMA2_CHANNEL5 + * - DMA2_CHANNEL6 + * - DMA2_CHANNEL7 + * @param dma_int: + * this parameter can be any combination of the following values: + * - DMA_FDT_INT + * - DMA_HDT_INT + * - DMA_DTERR_INT + * @param new_state (TRUE or FALSE) + * @retval none. + */ +void dma_interrupt_enable(dma_channel_type *dmax_channely, uint32_t dma_int, confirm_state new_state) +{ + if(new_state != FALSE) + { + dmax_channely->ctrl |= dma_int; + } + else + { + dmax_channely->ctrl &= ~dma_int; + } +} + +/** + * @brief enable or disable dma channel. + * @param dmax_channely: + * this parameter can be one of the following values: + * - DMA1_CHANNEL1 + * - DMA1_CHANNEL2 + * - DMA1_CHANNEL3 + * - DMA1_CHANNEL4 + * - DMA1_CHANNEL5 + * - DMA1_CHANNEL6 + * - DMA1_CHANNEL7 + * - DMA2_CHANNEL1 + * - DMA2_CHANNEL2 + * - DMA2_CHANNEL3 + * - DMA2_CHANNEL4 + * - DMA2_CHANNEL5 + * - DMA2_CHANNEL6 + * - DMA2_CHANNEL7 + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void dma_channel_enable(dma_channel_type *dmax_channely, confirm_state new_state) +{ + dmax_channely->ctrl_bit.chen = new_state; +} + +/** + * @brief dma flag get. + * @param dma_flag + * - DMA1_GL1_FLAG - DMA1_FDT1_FLAG - DMA1_HDT1_FLAG - DMA1_DTERR1_FLAG + * - DMA1_GL2_FLAG - DMA1_FDT2_FLAG - DMA1_HDT2_FLAG - DMA1_DTERR2_FLAG + * - DMA1_GL3_FLAG - DMA1_FDT3_FLAG - DMA1_HDT3_FLAG - DMA1_DTERR3_FLAG + * - DMA1_GL4_FLAG - DMA1_FDT4_FLAG - DMA1_HDT4_FLAG - DMA1_DTERR4_FLAG + * - DMA1_GL5_FLAG - DMA1_FDT5_FLAG - DMA1_HDT5_FLAG - DMA1_DTERR5_FLAG + * - DMA1_GL6_FLAG - DMA1_FDT6_FLAG - DMA1_HDT6_FLAG - DMA1_DTERR6_FLAG + * - DMA1_GL7_FLAG - DMA1_FDT7_FLAG - DMA1_HDT7_FLAG - DMA1_DTERR7_FLAG + * - DMA2_GL1_FLAG - DMA2_FDT1_FLAG - DMA2_HDT1_FLAG - DMA2_DTERR1_FLAG + * - DMA2_GL2_FLAG - DMA2_FDT2_FLAG - DMA2_HDT2_FLAG - DMA2_DTERR2_FLAG + * - DMA2_GL3_FLAG - DMA2_FDT3_FLAG - DMA2_HDT3_FLAG - DMA2_DTERR3_FLAG + * - DMA2_GL4_FLAG - DMA2_FDT4_FLAG - DMA2_HDT4_FLAG - DMA2_DTERR4_FLAG + * - DMA2_GL5_FLAG - DMA2_FDT5_FLAG - DMA2_HDT5_FLAG - DMA2_DTERR5_FLAG + * - DMA2_GL6_FLAG - DMA2_FDT6_FLAG - DMA2_HDT6_FLAG - DMA2_DTERR6_FLAG + * - DMA2_GL7_FLAG - DMA2_FDT7_FLAG - DMA2_HDT7_FLAG - DMA2_DTERR7_FLAG + * @retval state of dma flag. + */ +flag_status dma_flag_get(uint32_t dmax_flag) +{ + uint32_t temp = 0; + + if(dmax_flag > 0x10000000) + { + temp = DMA2->sts; + } + else + { + temp = DMA1->sts; + } + + if((temp & dmax_flag) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief dma interrupt flag get. + * @param dma_flag + * - DMA1_FDT1_FLAG - DMA1_HDT1_FLAG - DMA1_DTERR1_FLAG + * - DMA1_FDT2_FLAG - DMA1_HDT2_FLAG - DMA1_DTERR2_FLAG + * - DMA1_FDT3_FLAG - DMA1_HDT3_FLAG - DMA1_DTERR3_FLAG + * - DMA1_FDT4_FLAG - DMA1_HDT4_FLAG - DMA1_DTERR4_FLAG + * - DMA1_FDT5_FLAG - DMA1_HDT5_FLAG - DMA1_DTERR5_FLAG + * - DMA1_FDT6_FLAG - DMA1_HDT6_FLAG - DMA1_DTERR6_FLAG + * - DMA1_FDT7_FLAG - DMA1_HDT7_FLAG - DMA1_DTERR7_FLAG + * - DMA2_FDT1_FLAG - DMA2_HDT1_FLAG - DMA2_DTERR1_FLAG + * - DMA2_FDT2_FLAG - DMA2_HDT2_FLAG - DMA2_DTERR2_FLAG + * - DMA2_FDT3_FLAG - DMA2_HDT3_FLAG - DMA2_DTERR3_FLAG + * - DMA2_FDT4_FLAG - DMA2_HDT4_FLAG - DMA2_DTERR4_FLAG + * - DMA2_FDT5_FLAG - DMA2_HDT5_FLAG - DMA2_DTERR5_FLAG + * - DMA2_FDT6_FLAG - DMA2_HDT6_FLAG - DMA2_DTERR6_FLAG + * - DMA2_FDT7_FLAG - DMA2_HDT7_FLAG - DMA2_DTERR7_FLAG + * @retval state of dma flag. + */ +flag_status dma_interrupt_flag_get(uint32_t dmax_flag) +{ + uint32_t temp = 0; + + if(dmax_flag > 0x10000000) + { + temp = DMA2->sts; + } + else + { + temp = DMA1->sts; + } + + if((temp & dmax_flag) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief dma flag clear. + * @param dma_flag + * this parameter can be one of the following values: + * - DMA1_GL1_FLAG - DMA1_FDT1_FLAG - DMA1_HDT1_FLAG - DMA1_DTERR1_FLAG + * - DMA1_GL2_FLAG - DMA1_FDT2_FLAG - DMA1_HDT2_FLAG - DMA1_DTERR2_FLAG + * - DMA1_GL3_FLAG - DMA1_FDT3_FLAG - DMA1_HDT3_FLAG - DMA1_DTERR3_FLAG + * - DMA1_GL4_FLAG - DMA1_FDT4_FLAG - DMA1_HDT4_FLAG - DMA1_DTERR4_FLAG + * - DMA1_GL5_FLAG - DMA1_FDT5_FLAG - DMA1_HDT5_FLAG - DMA1_DTERR5_FLAG + * - DMA1_GL6_FLAG - DMA1_FDT6_FLAG - DMA1_HDT6_FLAG - DMA1_DTERR6_FLAG + * - DMA1_GL7_FLAG - DMA1_FDT7_FLAG - DMA1_HDT7_FLAG - DMA1_DTERR7_FLAG + * - DMA2_GL1_FLAG - DMA2_FDT1_FLAG - DMA2_HDT1_FLAG - DMA2_DTERR1_FLAG + * - DMA2_GL2_FLAG - DMA2_FDT2_FLAG - DMA2_HDT2_FLAG - DMA2_DTERR2_FLAG + * - DMA2_GL3_FLAG - DMA2_FDT3_FLAG - DMA2_HDT3_FLAG - DMA2_DTERR3_FLAG + * - DMA2_GL4_FLAG - DMA2_FDT4_FLAG - DMA2_HDT4_FLAG - DMA2_DTERR4_FLAG + * - DMA2_GL5_FLAG - DMA2_FDT5_FLAG - DMA2_HDT5_FLAG - DMA2_DTERR5_FLAG + * - DMA2_GL6_FLAG - DMA2_FDT6_FLAG - DMA2_HDT6_FLAG - DMA2_DTERR6_FLAG + * - DMA2_GL7_FLAG - DMA2_FDT7_FLAG - DMA2_HDT7_FLAG - DMA2_DTERR7_FLAG + * @retval none. + */ +void dma_flag_clear(uint32_t dmax_flag) +{ + if(dmax_flag > ((uint32_t)0x10000000)) + { + DMA2->clr = (uint32_t)(dmax_flag & 0x0FFFFFFF); + } + else + { + DMA1->clr = dmax_flag; + } +} + +/** + * @brief dma init config with its default value. + * @param dma_init_struct: pointer to a dma_init_type structure which will be initialized. + * @retval none. + */ +void dma_default_para_init(dma_init_type *dma_init_struct) +{ + dma_init_struct->peripheral_base_addr = 0; + dma_init_struct->memory_base_addr = 0; + dma_init_struct->direction = DMA_DIR_PERIPHERAL_TO_MEMORY; + dma_init_struct->buffer_size = 0; + dma_init_struct->peripheral_inc_enable = FALSE; + dma_init_struct->memory_inc_enable = FALSE; + dma_init_struct->peripheral_data_width = DMA_PERIPHERAL_DATA_WIDTH_BYTE; + dma_init_struct->memory_data_width = DMA_MEMORY_DATA_WIDTH_BYTE; + dma_init_struct->loop_mode_enable = FALSE; + dma_init_struct->priority = DMA_PRIORITY_LOW; +} + +/** + * @brief dma init. + * @param dmax_channely: + * this parameter can be one of the following values: + * - DMA1_CHANNEL1 + * - DMA1_CHANNEL2 + * - DMA1_CHANNEL3 + * - DMA1_CHANNEL4 + * - DMA1_CHANNEL5 + * - DMA1_CHANNEL6 + * - DMA1_CHANNEL7 + * - DMA2_CHANNEL1 + * - DMA2_CHANNEL2 + * - DMA2_CHANNEL3 + * - DMA2_CHANNEL4 + * - DMA2_CHANNEL5 + * - DMA2_CHANNEL6 + * - DMA2_CHANNEL7 + * @param dma_init_struct: pointer to a dma_init_type structure. + * @retval none. + */ +void dma_init(dma_channel_type *dmax_channely, dma_init_type *dma_init_struct) +{ + /* clear ctrl register dtd bit and m2m bit */ + dmax_channely->ctrl &= 0xbfef; + dmax_channely->ctrl |= dma_init_struct->direction; + + dmax_channely->ctrl_bit.chpl = dma_init_struct->priority; + dmax_channely->ctrl_bit.mwidth = dma_init_struct->memory_data_width; + dmax_channely->ctrl_bit.pwidth = dma_init_struct->peripheral_data_width; + dmax_channely->ctrl_bit.mincm = dma_init_struct->memory_inc_enable; + dmax_channely->ctrl_bit.pincm = dma_init_struct->peripheral_inc_enable; + dmax_channely->ctrl_bit.lm = dma_init_struct->loop_mode_enable; + dmax_channely->dtcnt_bit.cnt = dma_init_struct->buffer_size; + dmax_channely->paddr = dma_init_struct->peripheral_base_addr; + dmax_channely->maddr = dma_init_struct->memory_base_addr; +} +/** + * @brief dmamux init. + * @param dma_x: pointer to a dma_type structure, can be DMA1 or DMA2. + * @param dmamux_channelx: + * this parameter can be one of the following values: + * - DMA1MUX_CHANNEL1 + * - DMA1MUX_CHANNEL2 + * - DMA1MUX_CHANNEL3 + * - DMA1MUX_CHANNEL4 + * - DMA1MUX_CHANNEL5 + * - DMA1MUX_CHANNEL6 + * - DMA1MUX_CHANNEL7 + * - DMA2MUX_CHANNEL1 + * - DMA2MUX_CHANNEL2 + * - DMA2MUX_CHANNEL3 + * - DMA2MUX_CHANNEL4 + * - DMA2MUX_CHANNEL5 + * - DMA2MUX_CHANNEL6 + * - DMA2MUX_CHANNEL7 + * @param dmamux_req_sel: + * this parameter can be one of the following values: + * - DMAMUX_DMAREQ_ID_REQ_G1 - DMAMUX_DMAREQ_ID_REQ_G2 - DMAMUX_DMAREQ_ID_REQ_G3 - DMAMUX_DMAREQ_ID_REQ_G4 + * - DMAMUX_DMAREQ_ID_ADC1 - DMAMUX_DMAREQ_ID_ADC2 - DMAMUX_DMAREQ_ID_ADC3 - DMAMUX_DMAREQ_ID_DAC1 + * - DMAMUX_DMAREQ_ID_DAC2 - DMAMUX_DMAREQ_ID_TMR6_OVERFLOW- DMAMUX_DMAREQ_ID_TMR7_OVERFLOW- DMAMUX_DMAREQ_ID_SPI1_RX + * - DMAMUX_DMAREQ_ID_SPI1_TX - DMAMUX_DMAREQ_ID_SPI2_RX - DMAMUX_DMAREQ_ID_SPI2_TX - DMAMUX_DMAREQ_ID_SPI3_RX + * - DMAMUX_DMAREQ_ID_SPI3_TX - DMAMUX_DMAREQ_ID_SPI4_RX - DMAMUX_DMAREQ_ID_SPI4_TX - DMAMUX_DMAREQ_ID_I2S2_EXT_RX + * - DMAMUX_DMAREQ_ID_I2S2_EXT_TX - DMAMUX_DMAREQ_ID_I2S3_EXT_RX - DMAMUX_DMAREQ_ID_I2S3_EXT_TX - DMAMUX_DMAREQ_ID_I2C1_RX + * - DMAMUX_DMAREQ_ID_I2C1_TX - DMAMUX_DMAREQ_ID_I2C2_RX - DMAMUX_DMAREQ_ID_I2C2_TX - DMAMUX_DMAREQ_ID_I2C3_RX + * - DMAMUX_DMAREQ_ID_I2C3_TX - DMAMUX_DMAREQ_ID_USART1_RX - DMAMUX_DMAREQ_ID_USART1_TX - DMAMUX_DMAREQ_ID_USART2_RX + * - DMAMUX_DMAREQ_ID_USART2_TX - DMAMUX_DMAREQ_ID_USART3_RX - DMAMUX_DMAREQ_ID_USART3_TX - DMAMUX_DMAREQ_ID_UART4_RX + * - DMAMUX_DMAREQ_ID_UART4_TX - DMAMUX_DMAREQ_ID_UART5_RX - DMAMUX_DMAREQ_ID_UART5_TX - DMAMUX_DMAREQ_ID_USART6_RX + * - DMAMUX_DMAREQ_ID_USART6_TX - DMAMUX_DMAREQ_ID_UART7_RX - DMAMUX_DMAREQ_ID_UART7_TX - DMAMUX_DMAREQ_ID_UART8_RX + * - DMAMUX_DMAREQ_ID_UART8_TX - DMAMUX_DMAREQ_ID_SDIO1 - DMAMUX_DMAREQ_ID_SDIO2 - DMAMUX_DMAREQ_ID_QSPI1 + * - DMAMUX_DMAREQ_ID_QSPI2 - DMAMUX_DMAREQ_ID_TMR1_CH1 - DMAMUX_DMAREQ_ID_TMR1_CH2 - DMAMUX_DMAREQ_ID_TMR1_CH3 + * - DMAMUX_DMAREQ_ID_TMR1_CH4 - DMAMUX_DMAREQ_ID_TMR1_OVERFLOW- DMAMUX_DMAREQ_ID_TMR1_TRIG - DMAMUX_DMAREQ_ID_TMR1_HALL + * - DMAMUX_DMAREQ_ID_TMR8_CH1 - DMAMUX_DMAREQ_ID_TMR8_CH2 - DMAMUX_DMAREQ_ID_TMR8_CH3 - DMAMUX_DMAREQ_ID_TMR8_CH4 + * - DMAMUX_DMAREQ_ID_TMR8_OVERFLOW- DMAMUX_DMAREQ_ID_TMR8_TRIG - DMAMUX_DMAREQ_ID_TMR8_HALL - DMAMUX_DMAREQ_ID_TMR2_CH1 + * - DMAMUX_DMAREQ_ID_TMR2_CH2 - DMAMUX_DMAREQ_ID_TMR2_CH3 - DMAMUX_DMAREQ_ID_TMR2_CH4 - DMAMUX_DMAREQ_ID_TMR2_OVERFLOW + * - DMAMUX_DMAREQ_ID_TMR2_TRIG - DMAMUX_DMAREQ_ID_TMR3_CH1 - DMAMUX_DMAREQ_ID_TMR3_CH2 - DMAMUX_DMAREQ_ID_TMR3_CH3 + * - DMAMUX_DMAREQ_ID_TMR3_CH4 - DMAMUX_DMAREQ_ID_TMR3_OVERFLOW- DMAMUX_DMAREQ_ID_TMR3_TRIG - DMAMUX_DMAREQ_ID_TMR4_CH1 + * - DMAMUX_DMAREQ_ID_TMR4_CH2 - DMAMUX_DMAREQ_ID_TMR4_CH3 - DMAMUX_DMAREQ_ID_TMR4_CH4 - DMAMUX_DMAREQ_ID_TMR4_OVERFLOW + * - DMAMUX_DMAREQ_ID_TMR4_TRIG - DMAMUX_DMAREQ_ID_TMR5_CH1 - DMAMUX_DMAREQ_ID_TMR5_CH2 - DMAMUX_DMAREQ_ID_TMR5_CH3 + * - DMAMUX_DMAREQ_ID_TMR5_CH4 - DMAMUX_DMAREQ_ID_TMR5_OVERFLOW- DMAMUX_DMAREQ_ID_TMR5_TRIG - DMAMUX_DMAREQ_ID_TMR20_CH1 + * - DMAMUX_DMAREQ_ID_TMR20_CH2 - DMAMUX_DMAREQ_ID_TMR20_CH3 - DMAMUX_DMAREQ_ID_TMR20_CH4 - DMAMUX_DMAREQ_ID_TMR20_OVERFLOW + * - DMAMUX_DMAREQ_ID_TMR20_TRIG - DMAMUX_DMAREQ_ID_TMR20_HALL - DMAMUX_DMAREQ_ID_DVP + * @retval none. + */ +void dma_flexible_config(dma_type* dma_x, dmamux_channel_type *dmamux_channelx, dmamux_requst_id_sel_type dmamux_req_sel) +{ + dma_x->muxsel_bit.tblsel = TRUE; + dmamux_channelx->muxctrl_bit.reqsel = dmamux_req_sel; +} + +/** + * @brief enable or disable the dmamux. + * @param dma_x: pointer to a dma_type structure, can be DMA1 or DMA2. + * @param new_state (TRUE or FALSE) . + * @retval none. + */ +void dmamux_enable(dma_type *dma_x, confirm_state new_state) +{ + dma_x->muxsel_bit.tblsel = new_state; +} + +/** + * @brief dmamux init. + * @param dmamux_channelx: + * this parameter can be one of the following values: + * - DMA1MUX_CHANNEL1 + * - DMA1MUX_CHANNEL2 + * - DMA1MUX_CHANNEL3 + * - DMA1MUX_CHANNEL4 + * - DMA1MUX_CHANNEL5 + * - DMA1MUX_CHANNEL6 + * - DMA1MUX_CHANNEL7 + * - DMA2MUX_CHANNEL1 + * - DMA2MUX_CHANNEL2 + * - DMA2MUX_CHANNEL3 + * - DMA2MUX_CHANNEL4 + * - DMA2MUX_CHANNEL5 + * - DMA2MUX_CHANNEL6 + * - DMA2MUX_CHANNEL7 + * @param dmamux_req_sel: + * this parameter can be one of the following values: + * - DMAMUX_DMAREQ_ID_REQ_G1 - DMAMUX_DMAREQ_ID_REQ_G2 - DMAMUX_DMAREQ_ID_REQ_G3 - DMAMUX_DMAREQ_ID_REQ_G4 + * - DMAMUX_DMAREQ_ID_ADC1 - DMAMUX_DMAREQ_ID_ADC2 - DMAMUX_DMAREQ_ID_ADC3 - DMAMUX_DMAREQ_ID_DAC1 + * - DMAMUX_DMAREQ_ID_DAC2 - DMAMUX_DMAREQ_ID_TMR6_OVERFLOW- DMAMUX_DMAREQ_ID_TMR7_OVERFLOW- DMAMUX_DMAREQ_ID_SPI1_RX + * - DMAMUX_DMAREQ_ID_SPI1_TX - DMAMUX_DMAREQ_ID_SPI2_RX - DMAMUX_DMAREQ_ID_SPI2_TX - DMAMUX_DMAREQ_ID_SPI3_RX + * - DMAMUX_DMAREQ_ID_SPI3_TX - DMAMUX_DMAREQ_ID_SPI4_RX - DMAMUX_DMAREQ_ID_SPI4_TX - DMAMUX_DMAREQ_ID_I2S2_EXT_RX + * - DMAMUX_DMAREQ_ID_I2S2_EXT_TX - DMAMUX_DMAREQ_ID_I2S3_EXT_RX - DMAMUX_DMAREQ_ID_I2S3_EXT_TX - DMAMUX_DMAREQ_ID_I2C1_RX + * - DMAMUX_DMAREQ_ID_I2C1_TX - DMAMUX_DMAREQ_ID_I2C2_RX - DMAMUX_DMAREQ_ID_I2C2_TX - DMAMUX_DMAREQ_ID_I2C3_RX + * - DMAMUX_DMAREQ_ID_I2C3_TX - DMAMUX_DMAREQ_ID_USART1_RX - DMAMUX_DMAREQ_ID_USART1_TX - DMAMUX_DMAREQ_ID_USART2_RX + * - DMAMUX_DMAREQ_ID_USART2_TX - DMAMUX_DMAREQ_ID_USART3_RX - DMAMUX_DMAREQ_ID_USART3_TX - DMAMUX_DMAREQ_ID_UART4_RX + * - DMAMUX_DMAREQ_ID_UART4_TX - DMAMUX_DMAREQ_ID_UART5_RX - DMAMUX_DMAREQ_ID_UART5_TX - DMAMUX_DMAREQ_ID_USART6_RX + * - DMAMUX_DMAREQ_ID_USART6_TX - DMAMUX_DMAREQ_ID_UART7_RX - DMAMUX_DMAREQ_ID_UART7_TX - DMAMUX_DMAREQ_ID_UART8_RX + * - DMAMUX_DMAREQ_ID_UART8_TX - DMAMUX_DMAREQ_ID_SDIO1 - DMAMUX_DMAREQ_ID_SDIO2 - DMAMUX_DMAREQ_ID_QSPI1 + * - DMAMUX_DMAREQ_ID_QSPI2 - DMAMUX_DMAREQ_ID_TMR1_CH1 - DMAMUX_DMAREQ_ID_TMR1_CH2 - DMAMUX_DMAREQ_ID_TMR1_CH3 + * - DMAMUX_DMAREQ_ID_TMR1_CH4 - DMAMUX_DMAREQ_ID_TMR1_OVERFLOW- DMAMUX_DMAREQ_ID_TMR1_TRIG - DMAMUX_DMAREQ_ID_TMR1_HALL + * - DMAMUX_DMAREQ_ID_TMR8_CH1 - DMAMUX_DMAREQ_ID_TMR8_CH2 - DMAMUX_DMAREQ_ID_TMR8_CH3 - DMAMUX_DMAREQ_ID_TMR8_CH4 + * - DMAMUX_DMAREQ_ID_TMR8_OVERFLOW- DMAMUX_DMAREQ_ID_TMR8_TRIG - DMAMUX_DMAREQ_ID_TMR8_HALL - DMAMUX_DMAREQ_ID_TMR2_CH1 + * - DMAMUX_DMAREQ_ID_TMR2_CH2 - DMAMUX_DMAREQ_ID_TMR2_CH3 - DMAMUX_DMAREQ_ID_TMR2_CH4 - DMAMUX_DMAREQ_ID_TMR2_OVERFLOW + * - DMAMUX_DMAREQ_ID_TMR2_TRIG - DMAMUX_DMAREQ_ID_TMR3_CH1 - DMAMUX_DMAREQ_ID_TMR3_CH2 - DMAMUX_DMAREQ_ID_TMR3_CH3 + * - DMAMUX_DMAREQ_ID_TMR3_CH4 - DMAMUX_DMAREQ_ID_TMR3_OVERFLOW- DMAMUX_DMAREQ_ID_TMR3_TRIG - DMAMUX_DMAREQ_ID_TMR4_CH1 + * - DMAMUX_DMAREQ_ID_TMR4_CH2 - DMAMUX_DMAREQ_ID_TMR4_CH3 - DMAMUX_DMAREQ_ID_TMR4_CH4 - DMAMUX_DMAREQ_ID_TMR4_OVERFLOW + * - DMAMUX_DMAREQ_ID_TMR4_TRIG - DMAMUX_DMAREQ_ID_TMR5_CH1 - DMAMUX_DMAREQ_ID_TMR5_CH2 - DMAMUX_DMAREQ_ID_TMR5_CH3 + * - DMAMUX_DMAREQ_ID_TMR5_CH4 - DMAMUX_DMAREQ_ID_TMR5_OVERFLOW- DMAMUX_DMAREQ_ID_TMR5_TRIG - DMAMUX_DMAREQ_ID_TMR20_CH1 + * - DMAMUX_DMAREQ_ID_TMR20_CH2 - DMAMUX_DMAREQ_ID_TMR20_CH3 - DMAMUX_DMAREQ_ID_TMR20_CH4 - DMAMUX_DMAREQ_ID_TMR20_OVERFLOW + * - DMAMUX_DMAREQ_ID_TMR20_TRIG - DMAMUX_DMAREQ_ID_TMR20_HALL - DMAMUX_DMAREQ_ID_DVP + * @retval none. + */ +void dmamux_init(dmamux_channel_type *dmamux_channelx, dmamux_requst_id_sel_type dmamux_req_sel) +{ + dmamux_channelx->muxctrl_bit.reqsel = dmamux_req_sel; +} + +/** + * @brief dmamux sync init struct config with its default value. + * @param dmamux_sync_init_struct: pointer to a dmamux_sync_init_type structure which will be initialized. + * @retval none. + */ +void dmamux_sync_default_para_init(dmamux_sync_init_type *dmamux_sync_init_struct) +{ + dmamux_sync_init_struct->sync_enable = FALSE; + dmamux_sync_init_struct->sync_event_enable = FALSE; + dmamux_sync_init_struct->sync_polarity = DMAMUX_SYNC_POLARITY_DISABLE; + dmamux_sync_init_struct->sync_request_number = 0x0; + dmamux_sync_init_struct->sync_signal_sel = (dmamux_sync_id_sel_type)0; +} + +/** + * @brief dmamux synchronization config. + * @param dmamux_channelx: + * this parameter can be one of the following values: + * - DMA1MUX_CHANNEL1 + * - DMA1MUX_CHANNEL2 + * - DMA1MUX_CHANNEL3 + * - DMA1MUX_CHANNEL4 + * - DMA1MUX_CHANNEL5 + * - DMA1MUX_CHANNEL6 + * - DMA1MUX_CHANNEL7 + * - DMA2MUX_CHANNEL1 + * - DMA2MUX_CHANNEL2 + * - DMA2MUX_CHANNEL3 + * - DMA2MUX_CHANNEL4 + * - DMA2MUX_CHANNEL5 + * - DMA2MUX_CHANNEL6 + * - DMA2MUX_CHANNEL7 + * @param dmamux_sync_init_struct: ointer to a dmamux_sync_init_type structure. + * @retval none. + */ +void dmamux_sync_config(dmamux_channel_type *dmamux_channelx, dmamux_sync_init_type *dmamux_sync_init_struct) +{ + dmamux_channelx->muxctrl_bit.syncsel = dmamux_sync_init_struct->sync_signal_sel; + dmamux_channelx->muxctrl_bit.syncpol = dmamux_sync_init_struct->sync_polarity; + dmamux_channelx->muxctrl_bit.reqcnt = dmamux_sync_init_struct->sync_request_number - 1; + dmamux_channelx->muxctrl_bit.evtgen = dmamux_sync_init_struct->sync_event_enable; + dmamux_channelx->muxctrl_bit.syncen = dmamux_sync_init_struct->sync_enable; +} + +/** + * @brief dmamux request generator init struct config with its default value. + * @param dmamux_gen_init_struct: pointer to a dmamux_gen_init_type structure which will be initialized. + * @retval none. + */ +void dmamux_generator_default_para_init(dmamux_gen_init_type *dmamux_gen_init_struct) +{ + dmamux_gen_init_struct->gen_enable = FALSE; + dmamux_gen_init_struct->gen_polarity = DMAMUX_GEN_POLARITY_DISABLE; + dmamux_gen_init_struct->gen_request_number = 0x0; + dmamux_gen_init_struct->gen_signal_sel = (dmamux_gen_id_sel_type)0x0; +} + +/** + * @brief dmamux request generator init. + * @param dmamux_gen_x : + * this parameter can be one of the following values: + * - DMA1MUX_GENERATOR1 + * - DMA1MUX_GENERATOR2 + * - DMA1MUX_GENERATOR3 + * - DMA1MUX_GENERATOR4 + * - DMA2MUX_GENERATOR1 + * - DMA2MUX_GENERATOR2 + * - DMA2MUX_GENERATOR3 + * - DMA2MUX_GENERATOR4 + * @param dmamux_gen_init_struct: pointer to a dmamux_gen_init_type structure which will be initialized. + * @retval none. + */ +void dmamux_generator_config(dmamux_generator_type *dmamux_gen_x, dmamux_gen_init_type *dmamux_gen_init_struct) +{ + dmamux_gen_x->gctrl_bit.sigsel = dmamux_gen_init_struct->gen_signal_sel; + dmamux_gen_x->gctrl_bit.gpol = dmamux_gen_init_struct->gen_polarity; + dmamux_gen_x->gctrl_bit.greqcnt = dmamux_gen_init_struct->gen_request_number - 1; + dmamux_gen_x->gctrl_bit.gen = dmamux_gen_init_struct->gen_enable; +} + +/** + * @brief enable or disable the dmamux sync interrupts. + * @param dmamux_channelx: + * this parameter can be one of the following values: + * - DMA1MUX_CHANNEL1 + * - DMA1MUX_CHANNEL2 + * - DMA1MUX_CHANNEL3 + * - DMA1MUX_CHANNEL4 + * - DMA1MUX_CHANNEL5 + * - DMA1MUX_CHANNEL6 + * - DMA1MUX_CHANNEL7 + * - DMA2MUX_CHANNEL1 + * - DMA2MUX_CHANNEL2 + * - DMA2MUX_CHANNEL3 + * - DMA2MUX_CHANNEL4 + * - DMA2MUX_CHANNEL5 + * - DMA2MUX_CHANNEL6 + * - DMA2MUX_CHANNEL7 + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void dmamux_sync_interrupt_enable(dmamux_channel_type *dmamux_channelx, confirm_state new_state) +{ + if(new_state != FALSE) + { + dmamux_channelx->muxctrl_bit.syncovien = TRUE; + } + else + { + dmamux_channelx->muxctrl_bit.syncovien = FALSE; + } +} + +/** + * @brief enable or disable the dmamux request generator interrupts. + * @param dmamux_gen_x : pointer to a dmamux_generator_type structure. + * this parameter can be one of the following values: + * - DMA1MUX_GENERATOR1 + * - DMA1MUX_GENERATOR2 + * - DMA1MUX_GENERATOR3 + * - DMA1MUX_GENERATOR4 + * - DMA2MUX_GENERATOR1 + * - DMA2MUX_GENERATOR2 + * - DMA2MUX_GENERATOR3 + * - DMA2MUX_GENERATOR4 + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void dmamux_generator_interrupt_enable(dmamux_generator_type *dmamux_gen_x, confirm_state new_state) +{ + if(new_state != FALSE) + { + dmamux_gen_x->gctrl_bit.trgovien = TRUE; + } + else + { + dmamux_gen_x->gctrl_bit.trgovien = FALSE; + } +} + +/** + * @brief dmamux sync flag get. + * @param dma_x : pointer to a dma_type structure, can be DMA1 or DMA2. + * @param flag + * this parameter can be any combination of the following values: + * - DMAMUX_SYNC_OV1_FLAG + * - DMAMUX_SYNC_OV2_FLAG + * - DMAMUX_SYNC_OV3_FLAG + * - DMAMUX_SYNC_OV4_FLAG + * - DMAMUX_SYNC_OV5_FLAG + * - DMAMUX_SYNC_OV6_FLAG + * - DMAMUX_SYNC_OV7_FLAG + * @retval state of dmamux sync flag. + */ +flag_status dmamux_sync_flag_get(dma_type *dma_x, uint32_t flag) +{ + if((dma_x->muxsyncsts & flag) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief dmamux sync interrupt flag get. + * @param dma_x : pointer to a dma_type structure, can be DMA1 or DMA2. + * @param flag + * this parameter can be any combination of the following values: + * - DMAMUX_SYNC_OV1_FLAG + * - DMAMUX_SYNC_OV2_FLAG + * - DMAMUX_SYNC_OV3_FLAG + * - DMAMUX_SYNC_OV4_FLAG + * - DMAMUX_SYNC_OV5_FLAG + * - DMAMUX_SYNC_OV6_FLAG + * - DMAMUX_SYNC_OV7_FLAG + * @retval state of dmamux sync flag. + */ +flag_status dmamux_sync_interrupt_flag_get(dma_type *dma_x, uint32_t flag) +{ + + flag_status bitstatus = RESET; + uint32_t sync_int_temp = flag; + uint32_t index = 0; + uint32_t tmpreg = 0, enablestatus = 0; + uint32_t regoffset = 0x4; + + while((sync_int_temp & 0x00000001) == RESET) + { + sync_int_temp = sync_int_temp >> 1; + index++; + } + + if(dma_x == DMA1) + { + tmpreg = *(uint32_t*)(DMA1MUX_BASE + (index * regoffset)); + } + else + { + tmpreg = *(uint32_t*)(DMA2MUX_BASE + (index * regoffset)); + } + + if((tmpreg & (uint32_t)0x00000100) != (uint32_t)RESET) + { + enablestatus = SET; + } + else + { + enablestatus = RESET; + } + + if(dma_x == DMA1) + { + if(((DMA1->muxsyncsts & flag) != (uint32_t)RESET) && (enablestatus != RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if(((DMA2->muxsyncsts & flag) != (uint32_t)RESET) && (enablestatus != RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + return bitstatus; +} + +/** + * @brief dmamux sync flag clear. + * @param dma_x : pointer to a dma_type structure, can be DMA1 or DMA2. + * @param flag + * this parameter can be any combination of the following values: + * - DMAMUX_SYNC_OV1_FLAG + * - DMAMUX_SYNC_OV2_FLAG + * - DMAMUX_SYNC_OV3_FLAG + * - DMAMUX_SYNC_OV4_FLAG + * - DMAMUX_SYNC_OV5_FLAG + * - DMAMUX_SYNC_OV6_FLAG + * - DMAMUX_SYNC_OV7_FLAG + * @retval none. + */ +void dmamux_sync_flag_clear(dma_type *dma_x, uint32_t flag) +{ + dma_x->muxsyncclr = flag; +} + +/** + * @brief dmamux request generator flag get. + * @param dma_x : pointer to a dma_type structure, can be DMA1 or DMA2. + * @param flag + * this parameter can be any combination of the following values: + * - DMAMUX_GEN_TRIG_OV1_FLAG + * - DMAMUX_GEN_TRIG_OV2_FLAG + * - DMAMUX_GEN_TRIG_OV3_FLAG + * - DMAMUX_GEN_TRIG_OV4_FLAG + * @retval state of dmamux sync flag. + */ +flag_status dmamux_generator_flag_get(dma_type *dma_x, uint32_t flag) +{ + if((dma_x->muxgsts & flag) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief dmamux request generator interrupt flag get. + * @param dma_x : pointer to a dma_type structure, can be DMA1 or DMA2. + * @param flag + * this parameter can be any combination of the following values: + * - DMAMUX_GEN_TRIG_OV1_FLAG + * - DMAMUX_GEN_TRIG_OV2_FLAG + * - DMAMUX_GEN_TRIG_OV3_FLAG + * - DMAMUX_GEN_TRIG_OV4_FLAG + * @retval state of dmamux sync flag. + */ +flag_status dmamux_generator_interrupt_flag_get(dma_type *dma_x, uint32_t flag) +{ + flag_status bitstatus = RESET; + uint32_t sync_int_temp = flag; + uint32_t index = 0; + uint32_t tmpreg = 0, enablestatus = 0; + uint32_t regoffset = 0x4; + + while((sync_int_temp & 0x00000001) == RESET) + { + sync_int_temp = sync_int_temp >> 1; + index++; + } + + if(dma_x == DMA1) + tmpreg = *(uint32_t*)(DMA1MUX_GENERATOR1_BASE + (index * regoffset)); + else + tmpreg = *(uint32_t*)(DMA2MUX_GENERATOR1_BASE + (index * regoffset)); + + if((tmpreg & (uint32_t)0x00000100) != (uint32_t)RESET) + { + enablestatus = SET; + } + else + { + enablestatus = RESET; + } + if(dma_x == DMA1) + { + if(((DMA1->muxgsts & flag) != (uint32_t)RESET) && (enablestatus != RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if(((DMA2->muxgsts & flag) != (uint32_t)RESET) && (enablestatus != RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + + return bitstatus; +} + +/** + * @brief dmamux request generator flag clear. + * @param dma_x : pointer to a dma_type structure, can be DMA1 or DMA2. + * @param flag + * this parameter can be any combination of the following values: + * - DMAMUX_GEN_TRIG_OV1_FLAG + * - DMAMUX_GEN_TRIG_OV2_FLAG + * - DMAMUX_GEN_TRIG_OV3_FLAG + * - DMAMUX_GEN_TRIG_OV4_FLAG + * @retval none. + */ +void dmamux_generator_flag_clear(dma_type *dma_x, uint32_t flag) +{ + dma_x->muxgclr = flag; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_dvp.c b/armlib/at32_sys/drivers/src/at32f435_437_dvp.c new file mode 100644 index 000000000..62c167c6d --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_dvp.c @@ -0,0 +1,535 @@ +/** + ************************************************************************** + * @file at32f435_437_dvp.c + * @brief contains all the functions for the dvp firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup DVP + * @brief DVP driver modules + * @{ + */ + +#ifdef DVP_MODULE_ENABLED + +/** @defgroup DVP_private_functions + * @{ + */ + +/** + * @brief reset the dvp register + * @param none + * @retval none + */ +void dvp_reset(void) +{ + crm_periph_reset(CRM_DVP_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_DVP_PERIPH_RESET, FALSE); +} + +/** + * @brief enable or disable dvp capture + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dvp_capture_enable(confirm_state new_state) +{ + DVP->ctrl_bit.cap = new_state; +} + +/** + * @brief set dvp capture mode + * @param cap_mode + * this parameter can be one of the following values: + * - DVP_CAP_FUNC_MODE_CONTINUOUS + * - DVP_CAP_FUNC_MODE_SINGLE + * @retval none + */ +void dvp_capture_mode_set(dvp_cfm_type cap_mode) +{ + DVP->ctrl_bit.cfm = cap_mode; +} + +/** + * @brief set dvp cropping window enable + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dvp_window_crop_enable(confirm_state new_state) +{ + DVP->ctrl_bit.crp = new_state; +} + +/** + * @brief set dvp cropping window configuration + * @param crop_x: cropping window horizontal start pixel + * @param crop_y: cropping window vertical start line + * @param crop_w: cropping window horizontal pixel number + * @param crop_h: cropping window vertical line number + * @param bytes: the number of bytes corresponding to one pixel + * eg. y8:bytes = 1, rgb565:bytes = 2 + * @retval none + */ +void dvp_window_crop_set(uint16_t crop_x, uint16_t crop_y, uint16_t crop_w, uint16_t crop_h, uint8_t bytes) +{ + DVP->cwst = ((crop_x * bytes) | (crop_y << 16)); + DVP->cwsz = ((crop_w * bytes - 1) | ((crop_h - 1) << 16)); +} + +/** + * @brief enable or disable dvp jpeg + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dvp_jpeg_enable(confirm_state new_state) +{ + DVP->ctrl_bit.jpeg = new_state; +} + +/** + * @brief set dvp synchronization mode + * @param sync_mode + * this parameter can be one of the following values: + * - DVP_SYNC_MODE_HARDWARE + * - DVP_SYNC_MODE_EMBEDDED + * @retval none + */ +void dvp_sync_mode_set(dvp_sm_type sync_mode) +{ + DVP->ctrl_bit.sm = sync_mode; +} + +/** + * @brief set dvp synchronization code configuration + * @param fmsc(0x00~0xFF): frame start code + * @param fmec(0x00~0xFF): frame end code + * @param lnsc(0x00~0xFF): line start code + * @param lnec(0x00~0xFF): line end code + * @retval none + */ +void dvp_sync_code_set(uint8_t fmsc, uint8_t fmec, uint8_t lnsc, uint8_t lnec) +{ + DVP->scr = (fmsc | (lnsc << 8) | (lnec << 16) | (fmec << 24)); +} + +/** + * @brief set dvp synchronization unmask configuration + * @param fmsu(0x00~0xFF): frame start unmask + * @param fmeu(0x00~0xFF): frame end unmask + * @param lnsu(0x00~0xFF): line start unmask + * @param lneu(0x00~0xFF): line end unmask + * @retval none + */ +void dvp_sync_unmask_set(uint8_t fmsu, uint8_t fmeu, uint8_t lnsu, uint8_t lneu) +{ + DVP->sur = (fmsu | (lnsu << 8) | (lneu << 16) | (fmeu << 24)); +} + +/** + * @brief set dvp pixel clock polarity + * @param edge + * this parameter can be one of the following values: + * - DVP_CLK_POLARITY_RISING + * - DVP_CLK_POLARITY_FALLING + * @retval none + */ +void dvp_pclk_polarity_set(dvp_ckp_type edge) +{ + DVP->ctrl_bit.ckp = edge; +} + +/** + * @brief set dvp horizontal synchronization polarity + * @param hsync_pol + * this parameter can be one of the following values: + * - DVP_HSYNC_POLARITY_HIGH + * - DVP_HSYNC_POLARITY_LOW + * @retval none + */ +void dvp_hsync_polarity_set(dvp_hsp_type hsync_pol) +{ + DVP->ctrl_bit.hsp = hsync_pol; +} + +/** + * @brief set dvp vertical synchronization polarity + * @param vsync_pol + * this parameter can be one of the following values: + * - DVP_VSYNC_POLARITY_LOW + * - DVP_VSYNC_POLARITY_HIGH + * @retval none + */ +void dvp_vsync_polarity_set(dvp_vsp_type vsync_pol) +{ + DVP->ctrl_bit.vsp = vsync_pol; +} + +/** + * @brief config dvp basic frame rate control + * @note this function only work in continuous fire mode(ctrl_bit.cfm = 0) + * @param dvp_bfrc + * this parameter can be one of the following values: + * - DVP_BFRC_ALL + * - DVP_BFRC_HALF + * - DVP_BFRC_QUARTER + * @retval none + */ +void dvp_basic_frame_rate_control_set(dvp_bfrc_type dvp_bfrc) +{ + DVP->ctrl_bit.bfrc = dvp_bfrc; +} + +/** + * @brief config dvp pixel data length + * @param dvp_pdl + * this parameter can be one of the following values: + * - DVP_PIXEL_DATA_LENGTH_8 + * - DVP_PIXEL_DATA_LENGTH_10 + * - DVP_PIXEL_DATA_LENGTH_12 + * - DVP_PIXEL_DATA_LENGTH_14 + * @retval none + */ +void dvp_pixel_data_length_set(dvp_pdl_type dvp_pdl) +{ + DVP->ctrl_bit.pdl = dvp_pdl; +} + +/** + * @brief enable or disable dvp function + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dvp_enable(confirm_state new_state) +{ + DVP->ctrl_bit.ena = new_state; +} + +/** + * @brief set dvp zoomout select + * @param dvp_pcdes: pixel capture/drop selection extension (Only work when pcdc = 2) + * this parameter can be one of the following values: + * - DVP_PCDES_CAP_FIRST + * - DVP_PCDES_DROP_FIRST + * @retval none + */ +void dvp_zoomout_select(dvp_pcdes_type dvp_pcdes) +{ + DVP->actrl_bit.pcdes = dvp_pcdes; +} + +/** + * @brief set dvp zoomout configuration + * @param dvp_pcdc: basic pixel capture/drop control + * this parameter can be one of the following values: + * - DVP_PCDC_ALL + * - DVP_PCDC_ONE_IN_TWO + * - DVP_PCDC_ONE_IN_FOUR + * - DVP_PCDC_TWO_IN_FOUR + * @param dvp_pcds: pixel capture/drop selection + * this parameter can be one of the following values: + * - DVP_PCDS_CAP_FIRST + * - DVP_PCDS_DROP_FIRST + * @param dvp_lcdc: line capture/drop control + * this parameter can be one of the following values: + * - DVP_LCDC_ALL + * - DVP_LCDC_ONE_IN_TWO + * @param dvp_lcds: line capture/drop selection + * this parameter can be one of the following values: + * - DVP_LCDS_CAP_FIRST + * - DVP_LCDS_DROP_FIRST + * @retval none + */ +void dvp_zoomout_set(dvp_pcdc_type dvp_pcdc, dvp_pcds_type dvp_pcds, dvp_lcdc_type dvp_lcdc, dvp_lcds_type dvp_lcds) +{ + DVP->ctrl_bit.pcdc = dvp_pcdc; + DVP->ctrl_bit.pcds = dvp_pcds; + DVP->ctrl_bit.lcdc = dvp_lcdc; + DVP->ctrl_bit.lcds = dvp_lcds; +} + +/** + * @brief get dvp basic status + * @param dvp_status_basic_type: + * this parameter can be one of the following values: + * - DVP_STATUS_HSYN + * - DVP_STATUS_VSYN + * - DVP_STATUS_OFNE + * @retval flag_status (SET or RESET) + */ +flag_status dvp_basic_status_get(dvp_status_basic_type dvp_status_basic) +{ + flag_status status = RESET; + + if ((DVP->sts & (0x1 << dvp_status_basic)) != (uint16_t)RESET) + { + status = SET; + } + else + { + status = RESET; + } + + return status; +} + +/** + * @brief enable or disable dvp interrupt + * @param dvp_int: + * this parameter can be any combination of the following values: + * - DVP_CFD_INT + * - DVP_OVR_INT + * - DVP_ESE_INT + * - DVP_VS_INT + * - DVP_HS_INT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dvp_interrupt_enable(uint32_t dvp_int, confirm_state new_state) +{ + if(new_state == TRUE) + { + DVP->ier |= dvp_int; + } + else + { + DVP->ier &= ~dvp_int; + } +} + +/** + * @brief get dvp interrupt flag status + * @param flag + * this parameter can be one of the following values: + * - DVP_CFD_INT_FLAG + * - DVP_OVR_INT_FLAG + * - DVP_ESE_INT_FLAG + * - DVP_VS_INT_FLAG + * - DVP_HS_INT_FLAG + * @retval flag_status (SET or RESET) + */ +flag_status dvp_interrupt_flag_get(uint32_t flag) +{ + flag_status status = RESET; + + if((DVP->ists & flag) != RESET) + { + status = SET; + } + else + { + status = RESET; + } + + return status; +} + +/** + * @brief get dvp event flag status + * @param flag + * this parameter can be one of the following values: + * - DVP_CFD_EVT_FLAG + * - DVP_OVR_EVT_FLAG + * - DVP_ESE_EVT_FLAG + * - DVP_VS_EVT_FLAG + * - DVP_HS_EVT_FLAG + * @retval flag_status (SET or RESET) + */ +flag_status dvp_flag_get(uint32_t flag) +{ + flag_status status = RESET; + flag &= ~0x80000000; + + if((DVP->ests & flag) != RESET) + { + status = SET; + } + else + { + status = RESET; + } + + return status; +} + +/** + * @brief clear dvp's pending flags + * @param flag + * this parameter can be one of the following values: + * event flag: + * - DVP_CFD_EVT_FLAG + * - DVP_OVR_EVT_FLAG + * - DVP_ESE_EVT_FLAG + * - DVP_VS_EVT_FLAG + * - DVP_HS_EVT_FLAG + * interrupt flag: + * - DVP_CFD_INT_FLAG + * - DVP_OVR_INT_FLAG + * - DVP_ESE_INT_FLAG + * - DVP_VS_INT_FLAG + * - DVP_HS_INT_FLAG + * @retval none + */ +void dvp_flag_clear(uint32_t flag) +{ + flag &= ~0x80000000; + DVP->iclr = flag; +} + +/** + * @brief set dvp enhanced image scaling resize enable + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dvp_enhanced_scaling_resize_enable(confirm_state new_state) +{ + DVP->actrl_bit.eisre = new_state; +} +/** + * @brief set dvp enhanced image scaling resize configuration + * @param src_w(0x0001~0x1FFF): horizontal scaling resize source size (source image width) + * @param des_w(0x0001~0x1FFF): horizontal scaling resize target size (target image width) + * @param src_h(0x0001~0x1FFF): vertical scaling resize source size (source image height) + * @param des_h(0x0001~0x1FFF): vertical scaling resize target size (target image height) + * @retval none + */ +void dvp_enhanced_scaling_resize_set(uint16_t src_w, uint16_t des_w, uint16_t src_h, uint16_t des_h) +{ + if((!DVP->ctrl_bit.pcdc) && (!DVP->ctrl_bit.lcdc) && DVP->actrl_bit.efdf) + { + DVP->hscf = (src_w | (des_w << 16)); + DVP->vscf = (src_h | (des_h << 16)); + } +} + +/** + * @brief set enhanced frame rate control configuration + * @param efrcsf(0x00~0x1F): original frame rate contorl factor + * @param efrctf(0x00~0x1F): enhanced frame rate contorl factor + * @param new_state (TRUE or FALSE) + * @retval none + */ +void dvp_enhanced_framerate_set(uint16_t efrcsf, uint16_t efrctf, confirm_state new_state) +{ + if((!DVP->ctrl_bit.cfm) && (!DVP->ctrl_bit.bfrc) && (efrctf <= efrcsf)) + { + DVP->frf = (efrcsf | (efrctf << 8)); + } + + DVP->actrl_bit.efrce = new_state; +} + +/** + * @brief set dvp monochrome image binarization configuration + * @param mibthd(0x00~0xFF): monochrome image binarization threshold + * @param new_state: (TRUE or FALSE) + * @retval none + */ +void dvp_monochrome_image_binarization_set(uint8_t mibthd, confirm_state new_state) +{ + DVP->bth_bit.mibthd = mibthd; + DVP->actrl_bit.mibe = new_state; +} + +/** + * @brief set dvp enhanced function data format configuration + * @param dvp_efdf: enhanced function data format + * this parameter can be one of the following values: + * - DVP_EFDF_BYPASS + * - DVP_EFDF_YUV422_UYVY + * - DVP_EFDF_YUV422_YUYV + * - DVP_EFDF_RGB565_555 + * - DVP_EFDF_Y8 + * @retval none + */ +void dvp_enhanced_data_format_set(dvp_efdf_type dvp_efdf) +{ + DVP->actrl_bit.efdf = dvp_efdf; +} + +/** + * @brief set dvp input data un-used condition/number configuration + * @param dvp_idus: input data un-used condition + * this parameter can be one of the following values: + * - DVP_IDUS_MSB + * - DVP_IDUS_LSB + * @param dvp_idun: input data un-used number + * this parameter can be one of the following values: + * - DVP_IDUN_0 + * - DVP_IDUN_2 + * - DVP_IDUN_4 + * - DVP_IDUN_6 + * @retval none + */ +void dvp_input_data_unused_set(dvp_idus_type dvp_idus, dvp_idun_type dvp_idun) +{ + DVP->actrl_bit.idus = dvp_idus; + DVP->actrl_bit.idun = dvp_idun; +} + +/** + * @brief set dvp dma burst transfer configuration + * @param dvp_dmabt: dma burst transfer configuration + * this parameter can be one of the following values: + * - DVP_DMABT_SINGLE + * - DVP_DMABT_BURST + * @retval none + */ +void dvp_dma_burst_set(dvp_dmabt_type dvp_dmabt) +{ + DVP->actrl_bit.dmabt = dvp_dmabt; +} + +/** + * @brief set dvp hsync/vsync event interrupt strategy configuration + * @param dvp_hseid: hsync event interrupt strategy + * this parameter can be one of the following values: + * - DVP_HSEID_LINE_END + * - DVP_HSEID_LINE_START + * @param dvp_vseid: vsync event interrupt strategy + * this parameter can be one of the following values: + * - DVP_VSEID_FRAME_END + * - DVP_VSEID_FRMAE_START + * @retval none + */ +void dvp_sync_event_interrupt_set(dvp_hseid_type dvp_hseid, dvp_vseid_type dvp_vseid) +{ + DVP->actrl_bit.hseid = dvp_hseid; + DVP->actrl_bit.vseid = dvp_vseid; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_edma.c b/armlib/at32_sys/drivers/src/at32f435_437_edma.c new file mode 100644 index 000000000..d88e29cd3 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_edma.c @@ -0,0 +1,1060 @@ +/** + ************************************************************************** + * @file at32f435_437_edma.c + * @brief contains all the functions for the edma firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup EDMA + * @brief EDMA driver modules + * @{ + */ + +#ifdef EDMA_MODULE_ENABLED + +/** @defgroup EDMA_private_functions + * @{ + */ + +/** + * @brief reset edma_streamx channely register. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @retval none. + */ +void edma_reset(edma_stream_type *edma_streamx) +{ + /* reset registers for the selected stream */ + edma_streamx->ctrl_bit.sen = FALSE; + edma_streamx->ctrl = 0x0; + edma_streamx->dtcnt = 0x0; + edma_streamx->paddr = 0x0; + edma_streamx->m0addr = 0x0; + edma_streamx->m1addr = 0x0; + edma_streamx->fctrl = (uint32_t)0x00000021; + + /* reset interrupt pending bits for the selected stream */ + switch((uint32_t)edma_streamx) + { + case EDMA_STREAM1_BASE: + EDMA->clr1 = EDMA_STREAM1_INT_MASK; + break; + case EDMA_STREAM2_BASE: + EDMA->clr1 = EDMA_STREAM2_INT_MASK; + break; + case EDMA_STREAM3_BASE: + EDMA->clr1 = EDMA_STREAM3_INT_MASK; + break; + case EDMA_STREAM4_BASE: + EDMA->clr1 = EDMA_STREAM4_INT_MASK; + break; + case EDMA_STREAM5_BASE: + EDMA->clr2 = EDMA_STREAM5_INT_MASK; + break; + case EDMA_STREAM6_BASE: + EDMA->clr2 = EDMA_STREAM6_INT_MASK; + break; + case EDMA_STREAM7_BASE: + EDMA->clr2 = EDMA_STREAM7_INT_MASK; + break; + case EDMA_STREAM8_BASE: + EDMA->clr2 = EDMA_STREAM8_INT_MASK; + break; + default: break; + } +} + +/** + * @brief edma init. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param edma_init_struct: pointer to a edma_init_type structure. + * @retval none. + */ +void edma_init(edma_stream_type *edma_streamx, edma_init_type *edma_init_struct) +{ + /* config dtd bits */ + edma_streamx->ctrl_bit.dtd = edma_init_struct->direction; + + /* config pincm bit */ + edma_streamx->ctrl_bit.pincm = edma_init_struct->peripheral_inc_enable; + + /* config mincm bit*/ + edma_streamx->ctrl_bit.mincm = edma_init_struct->memory_inc_enable; + + /* config pwidth bits */ + edma_streamx->ctrl_bit.pwidth = edma_init_struct->peripheral_data_width; + + /* config mwidth bits */ + edma_streamx->ctrl_bit.mwidth = edma_init_struct->memory_data_width; + + /* config lm bit */ + edma_streamx->ctrl_bit.lm = edma_init_struct->loop_mode_enable; + + /* config spl bits */ + edma_streamx->ctrl_bit.spl = edma_init_struct->priority; + + /* config mct bits */ + edma_streamx->ctrl_bit.mct = edma_init_struct->memory_burst_mode; + + /* config pct bits */ + edma_streamx->ctrl_bit.pct = edma_init_struct->peripheral_burst_mode; + + /* config fen bits */ + edma_streamx->fctrl_bit.fen = edma_init_struct->fifo_mode_enable; + + /* config fthsel bits*/ + edma_streamx->fctrl_bit.fthsel = edma_init_struct->fifo_threshold; + + /* config dtcnt */ + edma_streamx->dtcnt = edma_init_struct->buffer_size; + + /* config paddr */ + edma_streamx->paddr = edma_init_struct->peripheral_base_addr; + + /* config m0addr */ + edma_streamx->m0addr = edma_init_struct->memory0_base_addr; +} + +/** + * @brief edma init struct config with its default value. + * @param edma_init_struct: pointer to a edma_init_type structure which will be initialized. + * @retval none. + */ +void edma_default_para_init(edma_init_type *edma_init_struct) +{ + edma_init_struct->buffer_size = 0; + edma_init_struct->loop_mode_enable = FALSE; + edma_init_struct->direction = EDMA_DIR_PERIPHERAL_TO_MEMORY; + edma_init_struct->fifo_threshold = EDMA_FIFO_THRESHOLD_1QUARTER; + edma_init_struct->fifo_mode_enable = FALSE; + edma_init_struct->memory0_base_addr = 0; + edma_init_struct->memory_burst_mode = EDMA_MEMORY_SINGLE; + edma_init_struct->memory_data_width = EDMA_MEMORY_DATA_WIDTH_BYTE; + edma_init_struct->memory_inc_enable = FALSE; + edma_init_struct->peripheral_base_addr = 0; + edma_init_struct->peripheral_burst_mode = EDMA_PERIPHERAL_SINGLE; + edma_init_struct->peripheral_data_width = EDMA_PERIPHERAL_DATA_WIDTH_BYTE; + edma_init_struct->peripheral_inc_enable = FALSE; + edma_init_struct->priority = EDMA_PRIORITY_LOW; +} + +/** + * @brief enable or disable the edma streamx. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edma_stream_enable(edma_stream_type *edma_streamx, confirm_state new_state) +{ + edma_streamx->ctrl_bit.sen = new_state; +} + +/** + * @brief enable or disable the edma streamx interrupts. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param edma_int: + * this parameter can be one of the following values: + * - EDMA_FDT_INT + * - EDMA_HDT_INT + * - EDMA_DTERR_INT + * - EDMA_DMERR_INT + * - EDMA_FERR_INT + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edma_interrupt_enable(edma_stream_type *edma_streamx, uint32_t edma_int, confirm_state new_state) +{ + if((edma_int & EDMA_FERR_INT) != 0) + { + if(new_state != FALSE) + { + edma_streamx->fctrl |= (uint32_t)EDMA_FERR_INT; + } + else + { + edma_streamx->fctrl &= ~(uint32_t)EDMA_FERR_INT; + } + } + + if(edma_int != EDMA_FERR_INT) + { + if(new_state != FALSE) + { + edma_streamx->ctrl |= (uint32_t)edma_int; + } + else + { + edma_streamx->ctrl &= ~(uint32_t)edma_int; + } + } +} + +/** + * @brief config the edma peripheral increment offset size mode. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param offset: peripheral increment offset size. + * this parameter can be one of the following values: + * - EDMA_PERIPHERAL_INC_PSIZE + * - EDMA_PERIPHERAL_INC_4_BYTE + * @retval none. + */ +void edma_peripheral_inc_offset_set(edma_stream_type *edma_streamx, edma_peripheral_inc_offset_type offset) +{ + edma_streamx->ctrl_bit.pincos = offset; +} + +/** + * @brief enable or disable the edma streamx flow controller. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edma_flow_controller_enable(edma_stream_type *edma_streamx, confirm_state new_state) +{ + edma_streamx->ctrl_bit.pfctrl = new_state; +} + +/** + * @brief set the number of data to be transferred. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param data_number: the number of data to be transferred (0x0000~0xFFFF). + * @retval none. + */ +void edma_data_number_set(edma_stream_type *edma_streamx, uint16_t data_number) +{ + /* write the number of data units to be transferred */ + edma_streamx->dtcnt = data_number; +} + +/** + * @brief get the number of data to be transferred. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @retval the number value. + */ +uint16_t edma_data_number_get(edma_stream_type *edma_streamx) +{ + return ((uint16_t)(edma_streamx->dtcnt)); +} + +/** + * @brief config the the double buffer mode. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param memory1_addr: the address of the second buffer. + * @param current_memory: specifies the target area of the first transfer. + * this parameter can be one of the following values: + * - EDMA_MEMORY_0 + * - EDMA_MEMORY_1 + * @retval none. + */ +void edma_double_buffer_mode_init(edma_stream_type *edma_streamx, uint32_t memory1_addr, edma_memory_type current_memory) +{ + if(current_memory != EDMA_MEMORY_0) + { + edma_streamx->ctrl_bit.cm = 1; + } + else + { + edma_streamx->ctrl_bit.cm = 0; + } + + edma_streamx->m1addr = memory1_addr; +} + +/** + * @brief enable or disable the double memory mode. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edma_double_buffer_mode_enable(edma_stream_type *edma_streamx, confirm_state new_state) +{ + if(new_state != FALSE) + { + edma_streamx->ctrl_bit.dmm = 1; + } + else + { + edma_streamx->ctrl_bit.dmm = 0; + } +} + +/** + * @brief config the memory address in double buffer mode. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @param memory_addr: the address of the buffer. + * @param memory_target: indicates the which memory addr register will be config. + * this parameter can be one of the following values: + * - EDMA_MEMORY_0 + * - EDMA_MEMORY_1 + * @retval none. + */ +void edma_memory_addr_set(edma_stream_type *edma_streamx, uint32_t memory_addr, uint32_t memory_target) +{ + if(memory_target != EDMA_MEMORY_0) + { + edma_streamx->m1addr = memory_addr; + } + else + { + edma_streamx->m0addr = memory_addr; + } +} + +/** + * @brief get the current memory target. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @retval the memory target + * - EDMA_MEMORY_0 + * - EDMA_MEMORY_1 + */ +edma_memory_type edma_memory_target_get(edma_stream_type *edma_streamx) +{ + return (edma_memory_type)(edma_streamx->ctrl_bit.cm); +} + +/** + * @brief get the enable status of edma streamx. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @retval current state of the edma streamx (SET or RESET). + */ +flag_status edma_stream_status_get(edma_stream_type *edma_streamx) +{ + if((edma_streamx->ctrl_bit.sen) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief get the fifo level status. + * @param edma_streamx: + * this parameter can be one of the following values: + * - EDMA_STREAM1 + * - EDMA_STREAM2 + * - EDMA_STREAM3 + * - EDMA_STREAM4 + * - EDMA_STREAM5 + * - EDMA_STREAM6 + * - EDMA_STREAM7 + * - EDMA_STREAM8 + * @retval the fifo filling state. + * - EDMA_FIFO_STATUS_LESS_1QUARTER: (0) < fifo level < (1/4). + * - EDMA_FIFO_STATUS_1QUARTER: (1/4) <= fifo level < (1/2) . + * - EDMA_FIFO_STATUS_HALF: (1/2) <= fifo level < (3/4). + * - EDMA_FIFO_STATUS_3QUARTER: (3/4) <= fifo level < (1). + * - EDMA_FIFO_STATUS_EMPTY: fifo is empty. + * - EDMA_FIFO_STATUS_FULL: fifo is full. + */ +uint8_t edma_fifo_status_get(edma_stream_type *edma_streamx) +{ + return (uint8_t)(edma_streamx->fctrl_bit.fsts); +} + +/** + * @brief get the edma flag. + * @param edma_flag: + * this parameter can be one of the following values: + * - EDMA_FERR1_FLAG - EDMA_DMERR1_FLAG - EDMA_DTERR1_FLAG - EDMA_HDT1_FLAG - EDMA_FDT1_FLAG + * - EDMA_FERR2_FLAG - EDMA_DMERR2_FLAG - EDMA_DTERR2_FLAG - EDMA_HDT2_FLAG - EDMA_FDT2_FLAG + * - EDMA_FERR3_FLAG - EDMA_DMERR3_FLAG - EDMA_DTERR3_FLAG - EDMA_HDT3_FLAG - EDMA_FDT3_FLAG + * - EDMA_FERR4_FLAG - EDMA_DMERR4_FLAG - EDMA_DTERR4_FLAG - EDMA_HDT4_FLAG - EDMA_FDT4_FLAG + * - EDMA_FERR5_FLAG - EDMA_DMERR5_FLAG - EDMA_DTERR5_FLAG - EDMA_HDT5_FLAG - EDMA_FDT5_FLAG + * - EDMA_FERR6_FLAG - EDMA_DMERR6_FLAG - EDMA_DTERR6_FLAG - EDMA_HDT6_FLAG - EDMA_FDT6_FLAG + * - EDMA_FERR7_FLAG - EDMA_DMERR7_FLAG - EDMA_DTERR7_FLAG - EDMA_HDT7_FLAG - EDMA_FDT7_FLAG + * - EDMA_FERR8_FLAG - EDMA_DMERR8_FLAG - EDMA_DTERR8_FLAG - EDMA_HDT8_FLAG - EDMA_FDT8_FLAG + * @retval the new state of edma flag (SET or RESET). + */ +flag_status edma_flag_get(uint32_t edma_flag) +{ + uint32_t status; + + if(edma_flag > ((uint32_t)0x20000000)) + { + status = EDMA->sts2; + } + else + { + status = EDMA->sts1; + } + + if((status & edma_flag) != ((uint32_t)RESET)) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief get the edma interrupt flag. + * @param edma_flag: + * this parameter can be one of the following values: + * - EDMA_FERR1_FLAG - EDMA_DMERR1_FLAG - EDMA_DTERR1_FLAG - EDMA_HDT1_FLAG - EDMA_FDT1_FLAG + * - EDMA_FERR2_FLAG - EDMA_DMERR2_FLAG - EDMA_DTERR2_FLAG - EDMA_HDT2_FLAG - EDMA_FDT2_FLAG + * - EDMA_FERR3_FLAG - EDMA_DMERR3_FLAG - EDMA_DTERR3_FLAG - EDMA_HDT3_FLAG - EDMA_FDT3_FLAG + * - EDMA_FERR4_FLAG - EDMA_DMERR4_FLAG - EDMA_DTERR4_FLAG - EDMA_HDT4_FLAG - EDMA_FDT4_FLAG + * - EDMA_FERR5_FLAG - EDMA_DMERR5_FLAG - EDMA_DTERR5_FLAG - EDMA_HDT5_FLAG - EDMA_FDT5_FLAG + * - EDMA_FERR6_FLAG - EDMA_DMERR6_FLAG - EDMA_DTERR6_FLAG - EDMA_HDT6_FLAG - EDMA_FDT6_FLAG + * - EDMA_FERR7_FLAG - EDMA_DMERR7_FLAG - EDMA_DTERR7_FLAG - EDMA_HDT7_FLAG - EDMA_FDT7_FLAG + * - EDMA_FERR8_FLAG - EDMA_DMERR8_FLAG - EDMA_DTERR8_FLAG - EDMA_HDT8_FLAG - EDMA_FDT8_FLAG + * @retval the new state of edma flag (SET or RESET). + */ +flag_status edma_interrupt_flag_get(uint32_t edma_flag) +{ + uint32_t status; + + if(edma_flag > ((uint32_t)0x20000000)) + { + status = EDMA->sts2; + } + else + { + status = EDMA->sts1; + } + + if((status & edma_flag) != ((uint32_t)RESET)) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief clear the edma flag. + * @param edma_flag: + * this parameter can be one of the following values: + * - EDMA_FERR1_FLAG - EDMA_DMERR1_FLAG - EDMA_DTERR1_FLAG - EDMA_HDT1_FLAG - EDMA_FDT1_FLAG + * - EDMA_FERR2_FLAG - EDMA_DMERR2_FLAG - EDMA_DTERR2_FLAG - EDMA_HDT2_FLAG - EDMA_FDT2_FLAG + * - EDMA_FERR3_FLAG - EDMA_DMERR3_FLAG - EDMA_DTERR3_FLAG - EDMA_HDT3_FLAG - EDMA_FDT3_FLAG + * - EDMA_FERR4_FLAG - EDMA_DMERR4_FLAG - EDMA_DTERR4_FLAG - EDMA_HDT4_FLAG - EDMA_FDT4_FLAG + * - EDMA_FERR5_FLAG - EDMA_DMERR5_FLAG - EDMA_DTERR5_FLAG - EDMA_HDT5_FLAG - EDMA_FDT5_FLAG + * - EDMA_FERR6_FLAG - EDMA_DMERR6_FLAG - EDMA_DTERR6_FLAG - EDMA_HDT6_FLAG - EDMA_FDT6_FLAG + * - EDMA_FERR7_FLAG - EDMA_DMERR7_FLAG - EDMA_DTERR7_FLAG - EDMA_HDT7_FLAG - EDMA_FDT7_FLAG + * - EDMA_FERR8_FLAG - EDMA_DMERR8_FLAG - EDMA_DTERR8_FLAG - EDMA_HDT8_FLAG - EDMA_FDT8_FLAG + * @retval none. + */ +void edma_flag_clear(uint32_t edma_flag) +{ + if(edma_flag > ((uint32_t)0x20000000)) + { + EDMA->clr2 = (uint32_t)(edma_flag & 0x0FFFFFFF); + } + else + { + EDMA->clr1 = edma_flag; + } +} + +/** + * @brief initialize the edma 2d mode. + * @param edma_streamx_2d: + * this parameter can be one of the following values: + * - EDMA_STREAM1_2D + * - EDMA_STREAM2_2D + * - EDMA_STREAM3_2D + * - EDMA_STREAM4_2D + * - EDMA_STREAM5_2D + * - EDMA_STREAM6_2D + * - EDMA_STREAM7_2D + * - EDMA_STREAM8_2D + * @param src_stride: source stride(-32768 ~ 32767). + * @param dst_stride: destination stride(-32768 ~ 32767). + * @param xcnt: x dimension transfer count(0x0000~ 0xFFFF). + * @param ycnt: y dimension transfer count(0x0000~ 0xFFFF). + * @retval none. + */ +void edma_2d_init(edma_stream_2d_type *edma_streamx_2d, int16_t src_stride, int16_t dst_stride, uint16_t xcnt, uint16_t ycnt) +{ + edma_streamx_2d->s2dcnt = (uint32_t)((ycnt << 16) | (xcnt)); + + edma_streamx_2d->stride = (uint32_t)((dst_stride << 16) | (src_stride)); +} + +/** + * @brief enable or disable the edma 2d mode. + * @param edma_streamx_2d: + * this parameter can be one of the following values: + * - EDMA_STREAM1_2D + * - EDMA_STREAM2_2D + * - EDMA_STREAM3_2D + * - EDMA_STREAM4_2D + * - EDMA_STREAM5_2D + * - EDMA_STREAM6_2D + * - EDMA_STREAM7_2D + * - EDMA_STREAM8_2D + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edma_2d_enable(edma_stream_2d_type *edma_streamx_2d, confirm_state new_state) +{ + uint32_t offset; + + offset = ((uint32_t)edma_streamx_2d - EDMA_STREAM1_2D_BASE) / 4; + + if(new_state != FALSE) + { + EDMA->s2dctrl |= (uint16_t)0x0001 << offset; + } + else + { + EDMA->s2dctrl &= ~((uint16_t)0x0001 << offset); + } +} + +/** + * @brief initialize the edma link list. + * @param edma_streamx_ll: + * this parameter can be one of the following values: + * - EDMA_STREAM1_LL + * - EDMA_STREAM2_LL + * - EDMA_STREAM3_LL + * - EDMA_STREAM4_LL + * - EDMA_STREAM5_LL + * - EDMA_STREAM6_LL + * - EDMA_STREAM7_LL + * - EDMA_STREAM8_LL + * @param pointer: link list pointer. + * @retval none. + */ +void edma_link_list_init(edma_stream_link_list_type *edma_streamx_ll, uint32_t pointer) +{ + edma_streamx_ll->llp = pointer; +} + +/** + * @brief enable or disable the edma stream link list mode. + * @param edma_streamx_ll: + * this parameter can be any combination of the following values: + * - EDMA_STREAM1_LL + * - EDMA_STREAM2_LL + * - EDMA_STREAM3_LL + * - EDMA_STREAM4_LL + * - EDMA_STREAM5_LL + * - EDMA_STREAM6_LL + * - EDMA_STREAM7_LL + * - EDMA_STREAM8_LL + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edma_link_list_enable(edma_stream_link_list_type *edma_streamx_ll, confirm_state new_state) +{ + uint32_t offset; + + offset = ((uint32_t)edma_streamx_ll - EDMA_STREAM1_LL_BASE) / 4; + + if(new_state != FALSE) + { + EDMA->llctrl |= (uint16_t)0x0001 << offset; + } + else + { + EDMA->llctrl &= ~((uint16_t)0x0001 << offset); + } +} + +/** + * @brief enable or disable the edma edmamux. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edmamux_enable(confirm_state new_state) +{ + EDMA->muxsel_bit.tblsel = new_state; +} + +/** + * @brief edmamux init. + * @param edmamux_channelx: + * this parameter can be one of the following values: + * - EDMAMUX_CHANNEL1 + * - EDMAMUX_CHANNEL2 + * - EDMAMUX_CHANNEL3 + * - EDMAMUX_CHANNEL4 + * - EDMAMUX_CHANNEL5 + * - EDMAMUX_CHANNEL6 + * - EDMAMUX_CHANNEL7 + * - EDMAMUX_CHANNEL8 + * @param edmamux_req_id: + * this parameter can be one of the following values: + * - EDMAMUX_DMAREQ_ID_REQ_G1 - EDMAMUX_DMAREQ_ID_REQ_G2 - EDMAMUX_DMAREQ_ID_REQ_G3 - EDMAMUX_DMAREQ_ID_REQ_G4 + * - EDMAMUX_DMAREQ_ID_ADC1 - EDMAMUX_DMAREQ_ID_ADC2 - EDMAMUX_DMAREQ_ID_ADC3 - EDMAMUX_DMAREQ_ID_DAC1 + * - EDMAMUX_DMAREQ_ID_DAC2 - EDMAMUX_DMAREQ_ID_TMR6_OVERFLOW- EDMAMUX_DMAREQ_ID_TMR7_OVERFLOW- EDMAMUX_DMAREQ_ID_SPI1_RX + * - EDMAMUX_DMAREQ_ID_SPI1_TX - EDMAMUX_DMAREQ_ID_SPI2_RX - EDMAMUX_DMAREQ_ID_SPI2_TX - EDMAMUX_DMAREQ_ID_SPI3_RX + * - EDMAMUX_DMAREQ_ID_SPI3_TX - EDMAMUX_DMAREQ_ID_SPI4_RX - EDMAMUX_DMAREQ_ID_SPI4_TX - EDMAMUX_DMAREQ_ID_I2S2_EXT_RX + * - EDMAMUX_DMAREQ_ID_I2S2_EXT_TX - EDMAMUX_DMAREQ_ID_I2S3_EXT_RX - EDMAMUX_DMAREQ_ID_I2S3_EXT_TX - EDMAMUX_DMAREQ_ID_I2C1_RX + * - EDMAMUX_DMAREQ_ID_I2C1_TX - EDMAMUX_DMAREQ_ID_I2C2_RX - EDMAMUX_DMAREQ_ID_I2C2_TX - EDMAMUX_DMAREQ_ID_I2C3_RX + * - EDMAMUX_DMAREQ_ID_I2C3_TX - EDMAMUX_DMAREQ_ID_USART1_RX - EDMAMUX_DMAREQ_ID_USART1_TX - EDMAMUX_DMAREQ_ID_USART2_RX + * - EDMAMUX_DMAREQ_ID_USART2_TX - EDMAMUX_DMAREQ_ID_USART3_RX - EDMAMUX_DMAREQ_ID_USART3_TX - EDMAMUX_DMAREQ_ID_UART4_RX + * - EDMAMUX_DMAREQ_ID_UART4_TX - EDMAMUX_DMAREQ_ID_UART5_RX - EDMAMUX_DMAREQ_ID_UART5_TX - EDMAMUX_DMAREQ_ID_USART6_RX + * - EDMAMUX_DMAREQ_ID_USART6_TX - EDMAMUX_DMAREQ_ID_UART7_RX - EDMAMUX_DMAREQ_ID_UART7_TX - EDMAMUX_DMAREQ_ID_UART8_RX + * - EDMAMUX_DMAREQ_ID_UART8_TX - EDMAMUX_DMAREQ_ID_SDIO1 - EDMAMUX_DMAREQ_ID_SDIO2 - EDMAMUX_DMAREQ_ID_QSPI1 + * - EDMAMUX_DMAREQ_ID_QSPI2 - EDMAMUX_DMAREQ_ID_TMR1_CH1 - EDMAMUX_DMAREQ_ID_TMR1_CH2 - EDMAMUX_DMAREQ_ID_TMR1_CH3 + * - EDMAMUX_DMAREQ_ID_TMR1_CH4 - EDMAMUX_DMAREQ_ID_TMR1_OVERFLOW- EDMAMUX_DMAREQ_ID_TMR1_TRIG - EDMAMUX_DMAREQ_ID_TMR1_COM + * - EDMAMUX_DMAREQ_ID_TMR8_CH1 - EDMAMUX_DMAREQ_ID_TMR8_CH2 - EDMAMUX_DMAREQ_ID_TMR8_CH3 - EDMAMUX_DMAREQ_ID_TMR8_CH4 + * - EDMAMUX_DMAREQ_ID_TMR8_UP - EDMAMUX_DMAREQ_ID_TMR8_TRIG - EDMAMUX_DMAREQ_ID_TMR8_COM - EDMAMUX_DMAREQ_ID_TMR2_CH1 + * - EDMAMUX_DMAREQ_ID_TMR2_CH2 - EDMAMUX_DMAREQ_ID_TMR2_CH3 - EDMAMUX_DMAREQ_ID_TMR2_CH4 - EDMAMUX_DMAREQ_ID_TMR2_OVERFLOW + * - EDMAMUX_DMAREQ_ID_TMR2_TRIG - EDMAMUX_DMAREQ_ID_TMR3_CH1 - EDMAMUX_DMAREQ_ID_TMR3_CH2 - EDMAMUX_DMAREQ_ID_TMR3_CH3 + * - EDMAMUX_DMAREQ_ID_TMR3_CH4 - EDMAMUX_DMAREQ_ID_TMR3_OVERFLOW- EDMAMUX_DMAREQ_ID_TMR3_TRIG - EDMAMUX_DMAREQ_ID_TMR4_CH1 + * - EDMAMUX_DMAREQ_ID_TMR4_CH2 - EDMAMUX_DMAREQ_ID_TMR4_CH3 - EDMAMUX_DMAREQ_ID_TMR4_CH4 - EDMAMUX_DMAREQ_ID_TMR4_OVERFLOW + * - EDMAMUX_DMAREQ_ID_TMR4_TRIG - EDMAMUX_DMAREQ_ID_TMR5_CH1 - EDMAMUX_DMAREQ_ID_TMR5_CH2 - EDMAMUX_DMAREQ_ID_TMR5_CH3 + * - EDMAMUX_DMAREQ_ID_TMR5_CH4 - EDMAMUX_DMAREQ_ID_TMR5_OVERFLOW- EDMAMUX_DMAREQ_ID_TMR5_TRIG - EDMAMUX_DMAREQ_ID_TMR20_CH1 + * - EDMAMUX_DMAREQ_ID_TMR20_CH2 - EDMAMUX_DMAREQ_ID_TMR20_CH3 - EDMAMUX_DMAREQ_ID_TMR20_CH4 - EDMAMUX_DMAREQ_ID_TMR20_OVERFLOW + * - EDMAMUX_DMAREQ_ID_TMR20_TRIG - EDMAMUX_DMAREQ_ID_TMR20_HALL - EDMAMUX_DMAREQ_ID_DVP + * @retval none. + */ +void edmamux_init(edmamux_channel_type *edmamux_channelx, edmamux_requst_id_sel_type edmamux_req_id) +{ + edmamux_channelx->muxctrl_bit.reqsel = edmamux_req_id; +} + +/** + * @brief edmamux sync init struct config with its default value. + * @param edmamux_sync_init_struct: pointer to a edmamux_sync_init_type structure which will be initialized. + * @retval none. + */ +void edmamux_sync_default_para_init(edmamux_sync_init_type *edmamux_sync_init_struct) +{ + edmamux_sync_init_struct->sync_enable = FALSE; + edmamux_sync_init_struct->sync_event_enable = FALSE; + edmamux_sync_init_struct->sync_polarity = EDMAMUX_SYNC_POLARITY_DISABLE; + edmamux_sync_init_struct->sync_request_number = 0x0; + edmamux_sync_init_struct->sync_signal_sel = EDMAMUX_SYNC_ID_EXINT0; +} + +/** + * @brief edmamux synchronization config. + * @param edmamux_channelx: + * this parameter can be one of the following values: + * - EDMAMUX_CHANNEL1 + * - EDMAMUX_CHANNEL2 + * - EDMAMUX_CHANNEL3 + * - EDMAMUX_CHANNEL4 + * - EDMAMUX_CHANNEL5 + * - EDMAMUX_CHANNEL6 + * - EDMAMUX_CHANNEL7 + * - EDMAMUX_CHANNEL8 + * @param edmamux_sync_init_struct: ointer to a edmamux_sync_init_type structure. + * @retval none. + */ +void edmamux_sync_config(edmamux_channel_type *edmamux_channelx, edmamux_sync_init_type *edmamux_sync_init_struct) +{ + edmamux_channelx->muxctrl_bit.syncsel = edmamux_sync_init_struct->sync_signal_sel; + edmamux_channelx->muxctrl_bit.syncpol = edmamux_sync_init_struct->sync_polarity; + edmamux_channelx->muxctrl_bit.reqcnt = edmamux_sync_init_struct->sync_request_number - 1; + edmamux_channelx->muxctrl_bit.evtgen = edmamux_sync_init_struct->sync_event_enable; + edmamux_channelx->muxctrl_bit.syncen = edmamux_sync_init_struct->sync_enable; +} + +/** + * @brief edmamux request generator init struct config with its default value. + * @param edmamux_gen_init_struct: pointer to a edmamux_gen_init_type structure which will be initialized. + * @retval none. + */ +void edmamux_generator_default_para_init(edmamux_gen_init_type *edmamux_gen_init_struct) +{ + edmamux_gen_init_struct->gen_enable = FALSE; + edmamux_gen_init_struct->gen_polarity = EDMAMUX_GEN_POLARITY_DISABLE; + edmamux_gen_init_struct->gen_request_number = 0x0; + edmamux_gen_init_struct->gen_signal_sel = EDMAMUX_GEN_ID_EXINT0; +} + +/** + * @brief edmamux request generator init. + * @param edmamux_gen_init_struct: pointer to a edmamux_gen_init_type structure which will be initialized. + * @retval none. + */ +void edmamux_generator_config(edmamux_generator_type *edmamux_gen_x, edmamux_gen_init_type *edmamux_gen_init_struct) +{ + edmamux_gen_x->gctrl_bit.sigsel = edmamux_gen_init_struct->gen_signal_sel; + edmamux_gen_x->gctrl_bit.gpol = edmamux_gen_init_struct->gen_polarity; + edmamux_gen_x->gctrl_bit.greqcnt = edmamux_gen_init_struct->gen_request_number - 1; + edmamux_gen_x->gctrl_bit.gen = edmamux_gen_init_struct->gen_enable; +} + +/** + * @brief enable or disable the edmamux sync interrupts. + * @param edmamux_channelx: + * this parameter can be one of the following values: + * - EDMAMUX_CHANNEL1 + * - EDMAMUX_CHANNEL2 + * - EDMAMUX_CHANNEL3 + * - EDMAMUX_CHANNEL4 + * - EDMAMUX_CHANNEL5 + * - EDMAMUX_CHANNEL6 + * - EDMAMUX_CHANNEL7 + * - EDMAMUX_CHANNEL8 + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edmamux_sync_interrupt_enable(edmamux_channel_type *edmamux_channelx, confirm_state new_state) +{ + if(new_state != FALSE) + { + edmamux_channelx->muxctrl_bit.syncovien = TRUE; + } + else + { + edmamux_channelx->muxctrl_bit.syncovien = FALSE; + } +} + +/** + * @brief enable or disable the edmamux request generator interrupts. + * @param edmamux_gen_x: pointer to a edmamux_generator_type structure. + * this parameter can be one of the following values: + * - EDMAMUX_GENERATOR1 + * - EDMAMUX_GENERATOR2 + * - EDMAMUX_GENERATOR3 + * - EDMAMUX_GENERATOR4 + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void edmamux_generator_interrupt_enable(edmamux_generator_type *edmamux_gen_x, confirm_state new_state) +{ + if(new_state != FALSE) + { + edmamux_gen_x->gctrl_bit.trgovien = TRUE; + } + else + { + edmamux_gen_x->gctrl_bit.trgovien = FALSE; + } +} + +/** + * @brief edmamux sync flag get. + * @param flag + * this parameter can be any combination of the following values: + * - EDMAMUX_SYNC_OV1_FLAG + * - EDMAMUX_SYNC_OV2_FLAG + * - EDMAMUX_SYNC_OV3_FLAG + * - EDMAMUX_SYNC_OV4_FLAG + * - EDMAMUX_SYNC_OV5_FLAG + * - EDMAMUX_SYNC_OV6_FLAG + * - EDMAMUX_SYNC_OV7_FLAG + * - EDMAMUX_SYNC_OV8_FLAG + * @retval state of edmamux sync flag. + */ +flag_status edmamux_sync_flag_get(uint32_t flag) +{ + if((EDMA->muxsyncsts & flag) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief edmamux sync interrupt flag get. + * @param flag + * this parameter can be any combination of the following values: + * - EDMAMUX_SYNC_OV1_FLAG + * - EDMAMUX_SYNC_OV2_FLAG + * - EDMAMUX_SYNC_OV3_FLAG + * - EDMAMUX_SYNC_OV4_FLAG + * - EDMAMUX_SYNC_OV5_FLAG + * - EDMAMUX_SYNC_OV6_FLAG + * - EDMAMUX_SYNC_OV7_FLAG + * - EDMAMUX_SYNC_OV8_FLAG + * @retval state of edmamux sync flag. + */ +flag_status edmamux_sync_interrupt_flag_get(uint32_t flag) +{ + uint32_t int_stat = 0; + + if(flag == EDMAMUX_SYNC_OV1_FLAG) + { + int_stat = (uint32_t)EDMAMUX_CHANNEL1->muxctrl_bit.syncovien; + } + else if(flag == EDMAMUX_SYNC_OV2_FLAG) + { + int_stat = (uint32_t)EDMAMUX_CHANNEL2->muxctrl_bit.syncovien; + } + else if(flag == EDMAMUX_SYNC_OV3_FLAG) + { + int_stat = (uint32_t)EDMAMUX_CHANNEL3->muxctrl_bit.syncovien; + } + else if(flag == EDMAMUX_SYNC_OV4_FLAG) + { + int_stat = (uint32_t)EDMAMUX_CHANNEL4->muxctrl_bit.syncovien; + } + else if(flag == EDMAMUX_SYNC_OV5_FLAG) + { + int_stat = (uint32_t)EDMAMUX_CHANNEL5->muxctrl_bit.syncovien; + } + else if(flag == EDMAMUX_SYNC_OV6_FLAG) + { + int_stat = (uint32_t)EDMAMUX_CHANNEL6->muxctrl_bit.syncovien; + } + else if(flag == EDMAMUX_SYNC_OV7_FLAG) + { + int_stat = (uint32_t)EDMAMUX_CHANNEL7->muxctrl_bit.syncovien; + } + else + { + int_stat = (uint32_t)EDMAMUX_CHANNEL8->muxctrl_bit.syncovien; + } + + if((int_stat != RESET) && ((EDMA->muxsyncsts & flag) != RESET)) + return SET; + else + return RESET; +} + +/** + * @brief edmamux sync flag clear. + * @param flag + * this parameter can be any combination of the following values: + * - EDMAMUX_SYNC_OV1_FLAG + * - EDMAMUX_SYNC_OV2_FLAG + * - EDMAMUX_SYNC_OV3_FLAG + * - EDMAMUX_SYNC_OV4_FLAG + * - EDMAMUX_SYNC_OV5_FLAG + * - EDMAMUX_SYNC_OV6_FLAG + * - EDMAMUX_SYNC_OV7_FLAG + * - EDMAMUX_SYNC_OV8_FLAG + * @retval none. + */ +void edmamux_sync_flag_clear(uint32_t flag) +{ + EDMA->muxsyncclr = flag; +} + +/** + * @brief edmamux request generator flag get. + * @param flag + * this parameter can be any combination of the following values: + * - EDMAMUX_GEN_TRIG_OV1_FLAG + * - EDMAMUX_GEN_TRIG_OV2_FLAG + * - EDMAMUX_GEN_TRIG_OV3_FLAG + * - EDMAMUX_GEN_TRIG_OV4_FLAG + * @retval state of edmamux sync flag. + */ +flag_status edmamux_generator_flag_get(uint32_t flag) +{ + if((EDMA->muxgsts & flag) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief edmamux request generator interrupt flag get. + * @param flag + * this parameter can be any combination of the following values: + * - EDMAMUX_GEN_TRIG_OV1_FLAG + * - EDMAMUX_GEN_TRIG_OV2_FLAG + * - EDMAMUX_GEN_TRIG_OV3_FLAG + * - EDMAMUX_GEN_TRIG_OV4_FLAG + * @retval state of edmamux sync flag. + */ +flag_status edmamux_generator_interrupt_flag_get(uint32_t flag) +{ + uint32_t int_stat = 0; + + if(flag == EDMAMUX_GEN_TRIG_OV1_FLAG) + { + int_stat = EDMAMUX_GENERATOR1->gctrl_bit.trgovien; + } + else if(flag == EDMAMUX_GEN_TRIG_OV2_FLAG) + { + int_stat = EDMAMUX_GENERATOR2->gctrl_bit.trgovien; + } + else if(flag == EDMAMUX_GEN_TRIG_OV3_FLAG) + { + int_stat = EDMAMUX_GENERATOR3->gctrl_bit.trgovien; + } + else + { + int_stat = EDMAMUX_GENERATOR4->gctrl_bit.trgovien; + } + + if((int_stat != RESET) && ((EDMA->muxgsts & flag) != RESET)) + return SET; + else + return RESET; +} + +/** + * @brief edmamux request generator flag clear. + * @param flag + * this parameter can be any combination of the following values: + * - EDMAMUX_GEN_TRIG_OV1_FLAG + * - EDMAMUX_GEN_TRIG_OV2_FLAG + * - EDMAMUX_GEN_TRIG_OV3_FLAG + * - EDMAMUX_GEN_TRIG_OV4_FLAG + * @retval none. + */ +void edmamux_generator_flag_clear(uint32_t flag) +{ + EDMA->muxgclr = flag; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_emac.c b/armlib/at32_sys/drivers/src/at32f435_437_emac.c new file mode 100644 index 000000000..3685ca2b2 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_emac.c @@ -0,0 +1,2457 @@ +/** + ************************************************************************** + * @file at32f435_437_emac.c + * @brief contains all the functions for the emac firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup EMAC + * @brief EMAC driver modules + * @{ + */ + +#ifdef EMAC_MODULE_ENABLED + +/** @defgroup EMAC_private_functions + * @{ + */ + +#if defined (EMAC_BASE) +/** + * @brief global pointers on tx and rx descriptor used to track transmit and receive descriptors + */ +__IO emac_dma_desc_type *dma_tx_desc_to_set; +__IO emac_dma_desc_type *dma_rx_desc_to_get; +__IO emac_dma_desc_type *ptp_dma_tx_desc_to_set; +__IO emac_dma_desc_type *ptp_dma_rx_desc_to_get; + +/* emac private function */ +static void emac_delay(uint32_t delay); + +/** + * @brief deinitialize the emac peripheral registers to their default reset values. + * @param none + * @retval none + */ +void emac_reset(void) +{ + crm_periph_reset(CRM_EMAC_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_EMAC_PERIPH_RESET, FALSE); +} + +/** + * @brief initialize emac control structure + * @param emac_control_config_type + * @retval none + */ +void emac_control_para_init(emac_control_config_type *control_para) +{ + control_para->auto_nego = EMAC_AUTO_NEGOTIATION_OFF; + control_para->auto_pad_crc_strip = FALSE; + control_para->back_off_limit = EMAC_BACKOFF_LIMIT_0; + control_para->carrier_sense_disable = FALSE; + control_para->deferral_check = FALSE; + control_para->duplex_mode = EMAC_HALF_DUPLEX; + control_para->fast_ethernet_speed = EMAC_SPEED_10MBPS; + control_para->interframe_gap = EMAC_INTERFRAME_GAP_96BIT; + control_para->ipv4_checksum_offload = FALSE; + control_para->jabber_disable = FALSE; + control_para->loopback_mode = FALSE; + control_para->receive_own_disable = FALSE; + control_para->retry_disable = FALSE; + control_para->watchdog_disable = FALSE; +} + +/** + * @brief according to hclk to set mdc clock frequency. + * @param none + * @retval none + */ +void emac_clock_range_set(void) +{ + uint8_t bits_value = 0; + crm_clocks_freq_type clocks_freq = {0}; + + /* clear clock range bits */ + EMAC->miiaddr_bit.cr = bits_value; + + crm_clocks_freq_get(&clocks_freq); + + if((clocks_freq.ahb_freq >= EMAC_HCLK_BORDER_20MHZ) && (clocks_freq.ahb_freq < EMAC_HCLK_BORDER_35MHZ)) + { + bits_value = EMAC_CLOCK_RANGE_20_TO_35; + } + else if((clocks_freq.ahb_freq >= EMAC_HCLK_BORDER_35MHZ) && (clocks_freq.ahb_freq < EMAC_HCLK_BORDER_60MHZ)) + { + bits_value = EMAC_CLOCK_RANGE_35_TO_60; + } + else if((clocks_freq.ahb_freq >= EMAC_HCLK_BORDER_60MHZ) && (clocks_freq.ahb_freq < EMAC_HCLK_BORDER_100MHZ)) + { + bits_value = EMAC_CLOCK_RANGE_60_TO_100; + } + else if((clocks_freq.ahb_freq >= EMAC_HCLK_BORDER_100MHZ) && (clocks_freq.ahb_freq < EMAC_HCLK_BORDER_150MHZ)) + { + bits_value = EMAC_CLOCK_RANGE_100_TO_150; + } + else if((clocks_freq.ahb_freq >= EMAC_HCLK_BORDER_150MHZ) && (clocks_freq.ahb_freq < EMAC_HCLK_BORDER_250MHZ)) + { + bits_value = EMAC_CLOCK_RANGE_150_TO_250; + } + else if((clocks_freq.ahb_freq >= EMAC_HCLK_BORDER_250MHZ) && (clocks_freq.ahb_freq <= EMAC_HCLK_BORDER_288MHZ)) + { + bits_value = EMAC_CLOCK_RANGE_250_TO_288; + } + + EMAC->miiaddr_bit.cr = bits_value; +} + +/** + * @brief configure emac control setting. + * @param control_struct: control setting of mac control register. + * @retval none + */ +void emac_control_config(emac_control_config_type *control_struct) +{ + emac_deferral_check_set(control_struct->deferral_check); + emac_backoff_limit_set(control_struct->back_off_limit); + emac_auto_pad_crc_stripping_set(control_struct->auto_pad_crc_strip); + emac_retry_disable(control_struct->retry_disable); + emac_ipv4_checksum_offload_set(control_struct->ipv4_checksum_offload); + emac_loopback_mode_enable(control_struct->loopback_mode); + emac_receive_own_disable(control_struct->receive_own_disable); + emac_carrier_sense_disable(control_struct->carrier_sense_disable); + emac_interframe_gap_set(control_struct->interframe_gap); + emac_jabber_disable(control_struct->jabber_disable); + emac_watchdog_disable(control_struct->watchdog_disable); +} + +/** + * @brief reset emac dma + * @param none + * @retval none + */ +void emac_dma_software_reset_set(void) +{ + EMAC_DMA->bm_bit.swr = 1; +} + +/** + * @brief get emac dma reset status + * @param none + * @retval TRUE of FALSE + */ +flag_status emac_dma_software_reset_get(void) +{ + if(EMAC_DMA->bm_bit.swr) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief enable emac and dma reception/transmission + * @param none + * @retval none + */ +void emac_start(void) +{ + /* enable transmit state machine of the mac for transmission on the mii */ + emac_trasmitter_enable(TRUE); + + /* flush transmit fifo */ + emac_dma_operations_set(EMAC_DMA_OPS_FLUSH_TRANSMIT_FIFO, TRUE); + + /* enable receive state machine of the mac for reception from the mii */ + emac_receiver_enable(TRUE); + + /* start dma transmission */ + emac_dma_operations_set(EMAC_DMA_OPS_START_STOP_TRANSMIT, TRUE); + + /* start dma reception */ + emac_dma_operations_set(EMAC_DMA_OPS_START_STOP_RECEIVE, TRUE); +} + +/** + * @brief stop emac and dma reception/transmission + * @param none + * @retval none + */ +void emac_stop(void) +{ + /* stop dma transmission */ + emac_dma_operations_set(EMAC_DMA_OPS_START_STOP_TRANSMIT, FALSE); + + /* stop dma reception */ + emac_dma_operations_set(EMAC_DMA_OPS_START_STOP_RECEIVE, FALSE); + + /* stop receive state machine of the mac for reception from the mii */ + emac_receiver_enable(FALSE); + + /* flush transmit fifo */ + emac_dma_operations_set(EMAC_DMA_OPS_FLUSH_TRANSMIT_FIFO, TRUE); + + /* stop transmit state machine of the mac for transmission on the mii */ + emac_trasmitter_enable(FALSE); +} + +/** + * @brief write phy data. + * @param address: phy address. + * @param reg: register of phy. + * @param data: value that wants to write to phy. + * @retval SUCCESS or ERROR + */ +error_status emac_phy_register_write(uint8_t address, uint8_t reg, uint16_t data) +{ + uint32_t timeout = 0; + + EMAC->miidt_bit.md = data; + + EMAC->miiaddr_bit.pa = address; + EMAC->miiaddr_bit.mii = reg; + EMAC->miiaddr_bit.mw = 1; + EMAC->miiaddr_bit.mb = 1; + + do + { + timeout++; + } while((EMAC->miiaddr_bit.mb) && (timeout < PHY_TIMEOUT)); + + if(timeout == PHY_TIMEOUT) + { + return ERROR; + } + return SUCCESS; +} + +/** + * @brief read phy data + * @param address: phy address. + * @param reg: register of phy. + * @param data: value that is read from phy. + * @retval SUCCESS or ERROR + */ +error_status emac_phy_register_read(uint8_t address, uint8_t reg, uint16_t *data) +{ + uint32_t timeout = 0; + + EMAC->miiaddr_bit.pa = address; + EMAC->miiaddr_bit.mii = reg; + EMAC->miiaddr_bit.mw = 0; + EMAC->miiaddr_bit.mb = 1; + + do + { + timeout++; + *data = EMAC->miidt_bit.md; + } while((EMAC->miiaddr_bit.mb) && (timeout < PHY_TIMEOUT)); + + if(timeout == PHY_TIMEOUT) + { + return ERROR; + } + + *data = EMAC->miidt_bit.md; + return SUCCESS; +} + +/** + * @brief emac receiver enable. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_receiver_enable(confirm_state new_state) +{ + __IO uint32_t temp = 0; + + EMAC->ctrl_bit.re = new_state; + + temp = EMAC->ctrl; + emac_delay(1); + EMAC->ctrl = temp; +} + +/** + * @brief emac transmitter enable. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_trasmitter_enable(confirm_state new_state) +{ + __IO uint32_t temp = 0; + + EMAC->ctrl_bit.te = new_state; + + temp = EMAC->ctrl; + emac_delay(1); + EMAC->ctrl = temp; +} + +/** + * @brief emac defferal check enable, only avalible in half-duplex mode. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_deferral_check_set(confirm_state new_state) +{ + EMAC->ctrl_bit.dc = new_state; +} + +/** + * @brief emac back-off limit, only avalible in half-duplex mode. + * @param slot_time: waiting time of retransmission after collision + * this parameter can be one of the following values: + * - EMAC_BACKOFF_LIMIT_0 + * - EMAC_BACKOFF_LIMIT_1 + * - EMAC_BACKOFF_LIMIT_2 + * - EMAC_BACKOFF_LIMIT_3 + * @retval none + */ +void emac_backoff_limit_set(emac_bol_type slot_time) +{ + EMAC->ctrl_bit.bl = slot_time; +} + +/** + * @brief set mac automatic pad/CRC stripping. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_auto_pad_crc_stripping_set(confirm_state new_state) +{ + EMAC->ctrl_bit.acs = new_state; +} + +/** + * @brief transmittion retry disable. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_retry_disable(confirm_state new_state) +{ + EMAC->ctrl_bit.dr = new_state; +} + +/** + * @brief set ipv4 checksum offload. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ipv4_checksum_offload_set(confirm_state new_state) +{ + EMAC->ctrl_bit.ipc = new_state; +} + +/** + * @brief enable loopback mode. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_loopback_mode_enable(confirm_state new_state) +{ + EMAC->ctrl_bit.lm = new_state; +} + +/** + * @brief receive own disable. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_receive_own_disable(confirm_state new_state) +{ + EMAC->ctrl_bit.dro = new_state; +} + +/** + * @brief carrier sense disbale. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_carrier_sense_disable(confirm_state new_state) +{ + EMAC->ctrl_bit.dcs = new_state; +} + +/** + * @brief set minimum interframe gap between frames during transmission. + * @param number: interframe gap number. + * this parameter can be one of the following values: + * - EMAC_FRAME_GAP_96BIT + * - EMAC_FRAME_GAP_88BIT + * - EMAC_FRAME_GAP_80BIT + * - EMAC_FRAME_GAP_72BIT + * - EMAC_FRAME_GAP_64BIT + * - EMAC_FRAME_GAP_56BIT + * - EMAC_FRAME_GAP_48BIT + * - EMAC_FRAME_GAP_40BIT + * @retval none + */ +void emac_interframe_gap_set(emac_intergrame_gap_type number) +{ + EMAC->ctrl_bit.ifg = number; +} + +/** + * @brief jabber disable. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_jabber_disable(confirm_state new_state) +{ + EMAC->ctrl_bit.jd = new_state; +} + +/** + * @brief watchdog disable. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_watchdog_disable(confirm_state new_state) +{ + EMAC->ctrl_bit.wd = new_state; +} + +/** + * @brief set mac fast emac speed. + * @param speed: mac bandwidth + * this parameter can be one of the following values: + * - EMAC_SPEED_10MBPS + * - EMAC_SPEED_100MBPS + * @retval none + */ +void emac_fast_speed_set(emac_speed_type speed) +{ + EMAC->ctrl_bit.fes = speed; +} + +/** + * @brief set duplex mode. + * @param duplex_mode: communication mode + * this parameter can be one of the following values: + * - EMAC_HALF_DUPLEX + * - EMAC_FULL_DUPLEX + * @retval none + */ +void emac_duplex_mode_set(emac_duplex_type duplex_mode) +{ + EMAC->ctrl_bit.dm = duplex_mode; +} + +/** + * @brief set mac promiscuous mode. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_promiscuous_mode_set(confirm_state new_state) +{ + EMAC->frmf_bit.pr = new_state; +} + +/** + * @brief hash unicast. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_hash_unicast_set(confirm_state new_state) +{ + EMAC->frmf_bit.huc = new_state; +} + +/** + * @brief hash multicast. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_hash_multicast_set(confirm_state new_state) +{ + EMAC->frmf_bit.hmc = new_state; +} + +/** + * @brief destination address inverse filtering. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_dstaddr_inverse_filter_set(confirm_state new_state) +{ + EMAC->frmf_bit.daif = new_state; +} + +/** + * @brief pass all multicasting frames. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_pass_all_multicasting_set(confirm_state new_state) +{ + EMAC->frmf_bit.pmc = new_state; +} + +/** + * @brief broadcast frames disable. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_broadcast_frames_disable(confirm_state new_state) +{ + EMAC->frmf_bit.dbf = new_state; +} + +/** + * @brief set mac how to pass control frames. + * @param condition: set what control frame can pass filter. + * this parameter can be one of the following values: + * - EMAC_CONTROL_FRAME_PASSING_NO + * - EMAC_CONTROL_FRAME_PASSING_ALL_EXCEPT_PAUSE + * - EMAC_CONTROL_FRAME_PASSING_ALL + * - EMAC_CONTROL_FRAME_PASSING_MATCH + * @retval none + */ +void emac_pass_control_frames_set(emac_control_frames_filter_type condition) +{ + EMAC->frmf_bit.pcf = condition; +} + +/** + * @brief source address inverse filtering. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_srcaddr_inverse_filter_set(confirm_state new_state) +{ + EMAC->frmf_bit.saif = new_state; +} + +/** + * @brief source address filtering. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_srcaddr_filter_set(confirm_state new_state) +{ + EMAC->frmf_bit.saf = new_state; +} + +/** + * @brief mac uses hash or perfect filter. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_hash_perfect_filter_set(confirm_state new_state) +{ + EMAC->frmf_bit.hpf = new_state; +} + +/** + * @brief mac receives all frames. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_receive_all_set(confirm_state new_state) +{ + EMAC->frmf_bit.ra = new_state; +} + +/** + * @brief hash table high 32-bit. + * @param high32bits: the highest 32-bit of hash table. + * @retval none + */ +void emac_hash_table_high32bits_set(uint32_t high32bits) +{ + EMAC->hth_bit.hth = high32bits; +} + +/** + * @brief hash table low 32-bit. + * @param low32bits: the lowest 32-bit of hash table. + * @retval none + */ +void emac_hash_table_low32bits_set(uint32_t low32bits) +{ + EMAC->htl_bit.htl = low32bits; +} + +/** + * @brief mii busy status. + * @param none + * @retval SET or RESET + */ +flag_status emac_mii_busy_get(void) +{ + if(EMAC->miiaddr_bit.mb) { + return SET; + } + else { + return RESET; + } +} + +/** + * @brief tell phy that will be written. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_mii_write(confirm_state new_state) +{ + EMAC->miiaddr_bit.mw = new_state; +} + +/** + * @brief set flow control busy in full-duplex mode, back pressure activate in half-duplex mode. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_fcb_bpa_set(confirm_state new_state) +{ + EMAC->fctrl_bit.fcbbpa = new_state; +} + +/** + * @brief set transmit flow control. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_transmit_flow_control_enable(confirm_state new_state) +{ + EMAC->fctrl_bit.etf = new_state; +} + +/** + * @brief set receive flow control. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_receive_flow_control_enable(confirm_state new_state) +{ + EMAC->fctrl_bit.erf = new_state; +} + +/** + * @brief set unicast pause frame detect. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_unicast_pause_frame_detect(confirm_state new_state) +{ + EMAC->fctrl_bit.dup = new_state; +} + +/** + * @brief set pause low threshold. + * @param pasue_threshold: pause slot time. + * this parameter can be one of the following values: + * - EMAC_PAUSE_4_SLOT_TIME + * - EMAC_PAUSE_28_SLOT_TIME + * - EMAC_PAUSE_144_SLOT_TIME + * - EMAC_PAUSE_256_SLOT_TIME + * @retval none + */ +void emac_pause_low_threshold_set(emac_pause_slot_threshold_type pasue_threshold) +{ + EMAC->fctrl_bit.plt = pasue_threshold; +} + +/** + * @brief set zero-quanta pause disable. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_zero_quanta_pause_disable(confirm_state new_state) +{ + EMAC->fctrl_bit.dzqp = new_state; +} + +/** + * @brief set pause time. + * @param pause_time: time slots to pause transmit frame. + * @retval none + */ +void emac_pause_time_set(uint16_t pause_time) +{ + EMAC->fctrl_bit.pt = pause_time; +} + +/** + * @brief identify coming vlan frame field with setting value. + * @param identifier: it will be compared with coming frame. + * @retval none + */ +void emac_vlan_tag_identifier_set(uint16_t identifier) +{ + EMAC->vlt_bit.vti = identifier; +} + +/** + * @brief set 12-bit vlan identifier. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_vlan_tag_comparison_set(confirm_state new_state) +{ + EMAC->vlt_bit.etv = new_state; +} + +/** + * @brief set wakeup frame. + * @param value: it will be written to eight non transparent registers. + * @retval none + */ +void emac_wakeup_frame_set(uint32_t value) +{ + EMAC->rwff = value; +} + +/** + * @brief get wakeup frame. + * @param none + * @retval get value from eight non transparent registers. + */ +uint32_t emac_wakeup_frame_get(void) +{ + return (EMAC->rwff); +} + +/** + * @brief all frame will be droppped except wakeup frame or magic packet. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_power_down_set(confirm_state new_state) +{ + EMAC->pmtctrlsts_bit.pd = new_state; +} + +/** + * @brief magic packet enable + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_magic_packet_enable(confirm_state new_state) +{ + EMAC->pmtctrlsts_bit.emp = new_state; +} + +/** + * @brief wakeup frame enable + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_wakeup_frame_enable(confirm_state new_state) +{ + EMAC->pmtctrlsts_bit.erwf = new_state; +} + +/** + * @brief received magic packet + * @param none + * @retval the new state of usart_flag (SET or RESET). + */ +flag_status emac_received_magic_packet_get(void) +{ + if(EMAC->pmtctrlsts_bit.rmp) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief received wakeup frame. + * @param none + * @retval the new state of usart_flag (SET or RESET). + */ +flag_status emac_received_wakeup_frame_get(void) +{ + if(EMAC->pmtctrlsts_bit.rrwf) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief set unicast frame that passes DAF as wakeup frame. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_global_unicast_set(confirm_state new_state) +{ + EMAC->pmtctrlsts_bit.guc = new_state; +} + +/** + * @brief reset wakeup frame filter resgister + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_wakeup_frame_filter_reset(confirm_state new_state) +{ + EMAC->pmtctrlsts_bit.rwffpr = new_state; +} + +/** + * @brief read interrupt status + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - EMAC_PMT_FLAG + * - EMAC_MMC_FLAG + * - EMAC_MMCR_FLAG + * - EMAC_MMCT_FLAG + * - EMAC_TST_FLAG + * @retval the new state of usart_flag (SET or RESET). + */ +flag_status emac_interrupt_status_read(uint32_t flag) +{ + if(EMAC->ists & flag) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief set interrupt mask + * @param mask_type: mask the interrupt signal + * this parameter can be one of the following values: + * - EMAC_INTERRUPT_PMT_MASK + * - EMAC_INTERRUPT_TST_MASK + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_interrupt_mask_set(emac_interrupt_mask_type mask_type, confirm_state new_state) +{ + switch(mask_type) + { + case EMAC_INTERRUPT_PMT_MASK: + { + EMAC->imr_bit.pim = new_state; + break; + } + case EMAC_INTERRUPT_TST_MASK: + { + EMAC->imr_bit.tim = new_state; + break; + } + } +} + +/** + * @brief set local mac address + * @param address: local address for mac0 + * @retval none + */ +void emac_local_address_set(uint8_t *address) +{ + EMAC->a0h_bit.ma0h = (uint32_t)(address[5] << 8 | address[4]); + EMAC->a0l_bit.ma0l = (uint32_t)(address[3] << 24 | address[2] << 16 | address[1] << 8 | address[0]); +} + +/** + * @brief set mac filter address + * @param mac: select which mac you want to set + * this parameter can be one of the following values: + * - EMAC_ADDRESS_FILTER_1 + * - EMAC_ADDRESS_FILTER_2 + * - EMAC_ADDRESS_FILTER_3 + * @retval none + */ +void emac_address_filter_set(emac_address_type mac, emac_address_filter_type filter, emac_address_mask_type mask_bit, confirm_state new_state) +{ + switch(mac) + { + case EMAC_ADDRESS_FILTER_1: + { + EMAC->a1h_bit.sa = filter; + EMAC->a1h_bit.mbc = mask_bit; + EMAC->a1h_bit.ae = new_state; + break; + } + case EMAC_ADDRESS_FILTER_2: + { + EMAC->a2h_bit.sa = filter; + EMAC->a2h_bit.mbc = mask_bit; + EMAC->a2h_bit.ae = new_state; + break; + } + case EMAC_ADDRESS_FILTER_3: + { + EMAC->a3h_bit.sa = filter; + EMAC->a3h_bit.mbc = mask_bit; + EMAC->a3h_bit.ae = new_state; + break; + } + } +} + +/** + * @brief set transmit/receive descriptor list address + * @param transfer_type: it will be transmit or receive + * this parameter can be one of the following values: + * - EMAC_DMA_TRANSMIT + * - EMAC_DMA_RECEIVE + * @param dma_desc_tab: pointer on the first tx desc list + * @param buff: pointer on the first tx/rx buffer list + * @param buffer_count: number of the used Tx desc in the list + * @retval none + */ +void emac_dma_descriptor_list_address_set(emac_dma_tx_rx_type transfer_type, emac_dma_desc_type *dma_desc_tab, uint8_t *buff, uint32_t buffer_count) +{ + uint32_t i = 0; + emac_dma_desc_type *dma_descriptor; + + switch(transfer_type) + { + case EMAC_DMA_TRANSMIT: + { + dma_tx_desc_to_set = dma_desc_tab; + for(i = 0; i < buffer_count; i++) + { + dma_descriptor = dma_desc_tab + i; + + dma_descriptor->status = EMAC_DMATXDESC_TCH; + + dma_descriptor->buf1addr = (uint32_t)(&buff[i * EMAC_MAX_PACKET_LENGTH]); + + if(i < (buffer_count - 1)) + { + dma_descriptor->buf2nextdescaddr = (uint32_t)(dma_desc_tab + i + 1); + } + else + { + dma_descriptor->buf2nextdescaddr = (uint32_t) dma_desc_tab; + } + } + EMAC_DMA->tdladdr_bit.stl = (uint32_t) dma_desc_tab; + break; + } + case EMAC_DMA_RECEIVE: + { + dma_rx_desc_to_get = dma_desc_tab; + for(i = 0; i < buffer_count; i++) + { + dma_descriptor = dma_desc_tab + i; + + dma_descriptor->status = EMAC_DMARXDESC_OWN; + + dma_descriptor->controlsize = EMAC_DMARXDESC_RCH | (uint32_t)EMAC_MAX_PACKET_LENGTH; + + dma_descriptor->buf1addr = (uint32_t)(&buff[i * EMAC_MAX_PACKET_LENGTH]); + + if(i < (buffer_count - 1)) + { + dma_descriptor->buf2nextdescaddr = (uint32_t)(dma_desc_tab + i + 1); + } + else + { + dma_descriptor->buf2nextdescaddr = (uint32_t) dma_desc_tab; + } + } + EMAC_DMA->rdladdr_bit.srl = (uint32_t) dma_desc_tab; + break; + } + } +} + +/** + * @brief set transmit/receive descriptor list address + * @param transfer_type: it will be transmit or receive + * this parameter can be one of the following values: + * - EMAC_DMA_TRANSMIT + * - EMAC_DMA_RECEIVE + * @param dma_desc_tab: pointer on the first tx desc list + * @param buff: pointer on the first tx/rx buffer list + * @param buffer_count: number of the used Tx desc in the list + * @retval none + */ +void emac_ptp_dma_descriptor_list_address_set(emac_dma_tx_rx_type transfer_type, emac_dma_desc_type *dma_desc_tab, emac_dma_desc_type *ptp_dma_desc_tab, uint8_t *buff, uint32_t buffer_count) +{ + uint32_t i = 0; + emac_dma_desc_type *dma_descriptor; + + switch(transfer_type) + { + case EMAC_DMA_TRANSMIT: + { + dma_tx_desc_to_set = dma_desc_tab; + ptp_dma_tx_desc_to_set = ptp_dma_desc_tab; + + for(i = 0; i < buffer_count; i++) + { + dma_descriptor = dma_desc_tab + i; + + dma_descriptor->status = EMAC_DMATXDESC_TCH | EMAC_DMATXDESC_TTSE; + + dma_descriptor->buf1addr = (uint32_t)(&buff[i * EMAC_MAX_PACKET_LENGTH]); + + if(i < (buffer_count - 1)) + { + dma_descriptor->buf2nextdescaddr = (uint32_t)(dma_desc_tab + i + 1); + } + else + { + dma_descriptor->buf2nextdescaddr = (uint32_t) dma_desc_tab; + } + + (&ptp_dma_desc_tab[i])->buf1addr = dma_descriptor->buf1addr; + (&ptp_dma_desc_tab[i])->buf2nextdescaddr = dma_descriptor->buf2nextdescaddr; + } + + (&ptp_dma_desc_tab[i-1])->status = (uint32_t) ptp_dma_desc_tab; + + EMAC_DMA->tdladdr_bit.stl = (uint32_t) dma_desc_tab; + break; + } + case EMAC_DMA_RECEIVE: + { + dma_rx_desc_to_get = dma_desc_tab; + ptp_dma_rx_desc_to_get = ptp_dma_desc_tab; + + for(i = 0; i < buffer_count; i++) + { + dma_descriptor = dma_desc_tab + i; + + dma_descriptor->status = EMAC_DMARXDESC_OWN; + + dma_descriptor->controlsize = EMAC_DMARXDESC_RCH | (uint32_t)EMAC_MAX_PACKET_LENGTH; + + dma_descriptor->buf1addr = (uint32_t)(&buff[i * EMAC_MAX_PACKET_LENGTH]); + + if(i < (buffer_count - 1)) + { + dma_descriptor->buf2nextdescaddr = (uint32_t)(dma_desc_tab + i + 1); + } + else + { + dma_descriptor->buf2nextdescaddr = (uint32_t) dma_desc_tab; + } + + (&ptp_dma_desc_tab[i])->buf1addr = dma_descriptor->buf1addr; + (&ptp_dma_desc_tab[i])->buf2nextdescaddr = dma_descriptor->buf2nextdescaddr; + } + + (&ptp_dma_desc_tab[i-1])->status = (uint32_t) ptp_dma_desc_tab; + + EMAC_DMA->rdladdr_bit.srl = (uint32_t) dma_desc_tab; + break; + } + } +} +/** + * @brief enable or disable the specified dma rx descriptor receive interrupt + * @param dma_rx_desc: pointer on a rx desc. + * @param new_state: new state of the specified dma rx descriptor interrupt. + * this parameter can be one of the following values: + * - TRUE + * - FALSE. + * @retval none + */ +void emac_dma_rx_desc_interrupt_config(emac_dma_desc_type *dma_rx_desc, confirm_state new_state) +{ + if (new_state != FALSE) + { + /* enable the dma rx desc receive interrupt */ + dma_rx_desc->controlsize &= (~(uint32_t)EMAC_DMARXDESC_DIC); + } + else + { + /* disable the dma rx desc receive interrupt */ + dma_rx_desc->controlsize |= EMAC_DMARXDESC_DIC; + } +} + +/** + * @brief get transmit/receive descriptor list address + * @param transfer_type: it will be transmit or receive + * this parameter can be one of the following values: + * - EMAC_DMA_TRANSMIT + * - EMAC_DMA_RECEIVE + * @retval transmit/receive descriptor list address + */ +uint32_t emac_dma_descriptor_list_address_get(emac_dma_tx_rx_type transfer_type) +{ + switch(transfer_type) + { + case EMAC_DMA_TRANSMIT: + { + return (EMAC_DMA->tdladdr_bit.stl); + } + case EMAC_DMA_RECEIVE: + { + return (EMAC_DMA->rdladdr_bit.srl); + } + } + return 0; +} + +/** + * @brief get the size of received the received packet. + * @param none + * @retval received packet size + */ +uint32_t emac_received_packet_size_get(void) +{ + uint32_t frame_length = 0; + if(((dma_rx_desc_to_get->status & EMAC_DMARXDESC_OWN) == (uint32_t)RESET) && + ((dma_rx_desc_to_get->status & EMAC_DMATXDESC_ES) == (uint32_t)RESET) && + ((dma_rx_desc_to_get->status & EMAC_DMARXDESC_LS) != (uint32_t)RESET) && + ((dma_rx_desc_to_get->status & EMAC_DMARXDESC_FS) != (uint32_t)RESET)) + { + frame_length = emac_dmarxdesc_frame_length_get((emac_dma_desc_type*) dma_rx_desc_to_get); + } + + return frame_length; +} + +/** + * @brief get the specified dma rx descsriptor frame length. + * @param dma_rx_desc: pointer on a dma rx descriptor + * @retval the rx descriptor received frame length. + */ +uint32_t emac_dmarxdesc_frame_length_get(emac_dma_desc_type *dma_rx_desc) +{ + return ((dma_rx_desc->status & EMAC_DMARXDESC_FL) >> EMAC_DMARXDESC_FRAME_LENGTHSHIFT); +} + +/** + * @brief init emac dma parameters + * @param emac_dma_config_type + * @retval none + */ +void emac_dma_para_init(emac_dma_config_type *control_para) +{ + control_para->aab_enable = FALSE; + control_para->da_enable = FALSE; + control_para->desc_skip_length = 0; + control_para->dt_disable = FALSE; + control_para->fb_enable = FALSE; + control_para->fef_enable = FALSE; + control_para->flush_rx_disable = FALSE; + control_para->fugf_enable = FALSE; + control_para->osf_enable = FALSE; + control_para->priority_ratio = EMAC_DMA_1_RX_1_TX; + control_para->rsf_enable = FALSE; + control_para->rx_dma_pal = EMAC_DMA_PBL_1; + control_para->rx_threshold = EMAC_DMA_RX_THRESHOLD_64_BYTES; + control_para->tsf_enable = FALSE; + control_para->tx_dma_pal = EMAC_DMA_PBL_1; + control_para->tx_threshold = EMAC_DMA_TX_THRESHOLD_64_BYTES; + control_para->usp_enable = FALSE; +} + +/** + * @brief configure emac dma + * @param emac_dma_config_type + * @retval none + */ +void emac_dma_config(emac_dma_config_type *control_para) +{ + EMAC_DMA->bm_bit.aab = control_para->aab_enable; + EMAC_DMA->bm_bit.dsl = control_para->desc_skip_length; + EMAC_DMA->bm_bit.rdp = control_para->rx_dma_pal; + EMAC_DMA->bm_bit.pbl = control_para->tx_dma_pal; + EMAC_DMA->bm_bit.fb = control_para->fb_enable; + EMAC_DMA->bm_bit.usp = control_para->usp_enable; + EMAC_DMA->bm_bit.da = control_para->da_enable; + EMAC_DMA->bm_bit.pr = control_para->priority_ratio; + + EMAC_DMA->opm_bit.dt = control_para->dt_disable; + EMAC_DMA->opm_bit.rsf = control_para->rsf_enable; + EMAC_DMA->opm_bit.dfrf = control_para->flush_rx_disable; + EMAC_DMA->opm_bit.tsf = control_para->tsf_enable; + EMAC_DMA->opm_bit.ttc = control_para->tx_threshold; + EMAC_DMA->opm_bit.fef = control_para->fef_enable; + EMAC_DMA->opm_bit.fugf = control_para->fugf_enable; + EMAC_DMA->opm_bit.rtc = control_para->rx_threshold; + EMAC_DMA->opm_bit.osf = control_para->osf_enable; +} + +/** + * @brief set rx tx priority + * @param ratio: rx tx priority ratio + * this parameter can be one of the following values: + * - EMAC_DMA_1_RX_1_TX + * - EMAC_DMA_2_RX_1_TX + * - EMAC_DMA_3_RX_1_TX + * - EMAC_DMA_4_RX_1_TX + * @param new_state: TRUE or FALSE + * @retval none + */ +void emac_dma_arbitation_set(emac_dma_rx_tx_ratio_type ratio, confirm_state new_state) +{ + EMAC_DMA->bm_bit.da = new_state; + + if(new_state) + { + EMAC_DMA->bm_bit.pr = ratio; + } +} + +/** + * @brief set descriptor skip mength + * @param length: descriptor skip length + * @retval none + */ +void emac_dma_descriptor_skip_length_set(uint8_t length) +{ + EMAC_DMA->bm_bit.dsl = length; +} + +/** + * @brief set programmable burst length + * @param tx_length: tx programmable burst length + * this parameter can be one of the following values: + * - EMAC_DMA_PBL_1 + * - EMAC_DMA_PBL_2 + * - EMAC_DMA_PBL_4 + * - EMAC_DMA_PBL_8 + * - EMAC_DMA_PBL_16 + * - EMAC_DMA_PBL_32 + * @param rx_length: rx programmable burst length + * this parameter can be one of the following values: + * - EMAC_DMA_PBL_1 + * - EMAC_DMA_PBL_2 + * - EMAC_DMA_PBL_4 + * - EMAC_DMA_PBL_8 + * - EMAC_DMA_PBL_16 + * - EMAC_DMA_PBL_32 + * @param new_state: TRUE or FALSE + * @retval none + */ +void emac_dma_separate_pbl_set(emac_dma_pbl_type tx_length, emac_dma_pbl_type rx_length, confirm_state new_state) +{ + EMAC_DMA->bm_bit.usp = new_state; + EMAC_DMA->bm_bit.pbl = tx_length; + + if(new_state) + { + EMAC_DMA->bm_bit.pbl = rx_length; + } +} + +/** + * @brief set 8 times programmable burst length + * @param new_state: TRUE or FALSE + * @retval none + */ +void emac_dma_eight_pbl_mode_set(confirm_state new_state) +{ + EMAC_DMA->bm_bit.pblx8 = new_state; +} + +/** + * @brief set address-aligned beats + * @param new_state: TRUE or FALSE + * @retval none + */ +void emac_dma_address_aligned_beats_set(confirm_state new_state) +{ + EMAC_DMA->bm_bit.aab = new_state; +} + +/** + * @brief set transmit/receive poll demand + * @param transfer_type: it will be transmit or receive + * this parameter can be one of the following values: + * - EMAC_DMA_TRANSMIT + * - EMAC_DMA_RECEIVE + * @param value: it can be any number + * @retval none + */ +void emac_dma_poll_demand_set(emac_dma_tx_rx_type transfer_type, uint32_t value) +{ + switch(transfer_type) + { + case EMAC_DMA_TRANSMIT: + { + EMAC_DMA->tpd_bit.tpd = value; + break; + } + case EMAC_DMA_RECEIVE: + { + EMAC_DMA->rpd_bit.rpd = value; + break; + } + } +} + +/** + * @brief get transmit poll demand + * @param transfer_type: it will be transmit or receive + * this parameter can be one of the following values: + * - EMAC_DMA_TRANSMIT + * - EMAC_DMA_RECEIVE + * @retval current transmit descriptor + */ +uint32_t emac_dma_poll_demand_get(emac_dma_tx_rx_type transfer_type) +{ + switch(transfer_type) + { + case EMAC_DMA_TRANSMIT: + { + return (EMAC_DMA->tpd_bit.tpd); + } + case EMAC_DMA_RECEIVE: + { + return (EMAC_DMA->rpd_bit.rpd); + } + } + return 0; +} + +/** + * @brief get receive dma process status + * @param none + * @retval every situation it describe in RM + * this parameter can be one of the following values: + * - EMAC_DMA_RX_RESET_STOP_COMMAND + * - EMAC_DMA_RX_FETCH_DESCRIPTOR + * - EMAC_DMA_RX_WAITING_PACKET + * - EMAC_DMA_RX_DESCRIPTOR_UNAVAILABLE + * - EMAC_DMA_RX_CLOSE_DESCRIPTOR + * - EMAC_DMA_RX_FIFO_TO_HOST + */ +emac_dma_receive_process_status_type emac_dma_receive_status_get(void) +{ + switch(EMAC_DMA->sts_bit.rs) + { + case EMAC_DMA_RX_RESET_STOP_COMMAND: + { + return EMAC_DMA_RX_RESET_STOP_COMMAND; + } + + case EMAC_DMA_RX_FETCH_DESCRIPTOR: + { + return EMAC_DMA_RX_FETCH_DESCRIPTOR; + } + + case EMAC_DMA_RX_WAITING_PACKET: + { + return EMAC_DMA_RX_WAITING_PACKET; + } + + case EMAC_DMA_RX_DESCRIPTOR_UNAVAILABLE: + { + return EMAC_DMA_RX_DESCRIPTOR_UNAVAILABLE; + } + + case EMAC_DMA_RX_CLOSE_DESCRIPTOR: + { + return EMAC_DMA_RX_CLOSE_DESCRIPTOR; + } + + case EMAC_DMA_RX_FIFO_TO_HOST: + { + return EMAC_DMA_RX_FIFO_TO_HOST; + } + } + + return EMAC_DMA_RX_RESET_STOP_COMMAND; +} + +/** + * @brief get transmit dma process status + * @param none + * @retval every situation it describe in RM + * this parameter can be one of the following values: + * - EMAC_DMA_TX_RESET_STOP_COMMAND + * - EMAC_DMA_TX_FETCH_DESCRIPTOR + * - EMAC_DMA_TX_WAITING_FOR_STATUS + * - EMAC_DMA_TX_HOST_TO_FIFO + * - EMAC_DMA_TX_DESCRIPTOR_UNAVAILABLE + * - EMAC_DMA_TX_CLOSE_DESCRIPTOR + */ +emac_dma_transmit_process_status_type emac_dma_transmit_status_get(void) +{ + switch(EMAC_DMA->sts_bit.ts) + { + case EMAC_DMA_TX_RESET_STOP_COMMAND: + { + return EMAC_DMA_TX_RESET_STOP_COMMAND; + } + + case EMAC_DMA_TX_FETCH_DESCRIPTOR: + { + return EMAC_DMA_TX_FETCH_DESCRIPTOR; + } + + case EMAC_DMA_TX_WAITING_FOR_STATUS: + { + return EMAC_DMA_TX_WAITING_FOR_STATUS; + } + + case EMAC_DMA_TX_HOST_TO_FIFO: + { + return EMAC_DMA_TX_HOST_TO_FIFO; + } + + case EMAC_DMA_TX_DESCRIPTOR_UNAVAILABLE: + { + return EMAC_DMA_TX_DESCRIPTOR_UNAVAILABLE; + } + + case EMAC_DMA_TX_CLOSE_DESCRIPTOR: + { + return EMAC_DMA_TX_CLOSE_DESCRIPTOR; + } + } + + return EMAC_DMA_TX_RESET_STOP_COMMAND; +} + +/** + * @brief set dma operations + * @param ops: operations of dma + * this parameter can be one of the following values: + * - EMAC_DMA_OPS_START_STOP_RECEIVE + * - EMAC_DMA_OPS_SECOND_FRAME + * - EMAC_DMA_OPS_FORWARD_UNDERSIZED + * - EMAC_DMA_OPS_FORWARD_ERROR + * - EMAC_DMA_OPS_START_STOP_TRANSMIT + * - EMAC_DMA_OPS_FLUSH_TRANSMIT_FIFO + * - EMAC_DMA_OPS_TRANSMIT_STORE_FORWARD + * - EMAC_DMA_OPS_RECEIVE_FLUSH_DISABLE + * - EMAC_DMA_OPS_RECEIVE_STORE_FORWARD + * - EMAC_DMA_OPS_DROP_ERROR_DISABLE + * @param new_state: TRUE or FALSE + * @retval none + */ +void emac_dma_operations_set(emac_dma_operations_type ops, confirm_state new_state) +{ + __IO uint32_t temp = 0; + switch(ops) + { + case EMAC_DMA_OPS_START_STOP_RECEIVE: + { + EMAC_DMA->opm_bit.ssr = new_state; + break; + } + + case EMAC_DMA_OPS_SECOND_FRAME: + { + EMAC_DMA->opm_bit.osf = new_state; + break; + } + + case EMAC_DMA_OPS_FORWARD_UNDERSIZED: + { + EMAC_DMA->opm_bit.fugf = new_state; + break; + } + + case EMAC_DMA_OPS_FORWARD_ERROR: + { + EMAC_DMA->opm_bit.fef = new_state; + break; + } + + case EMAC_DMA_OPS_START_STOP_TRANSMIT: + { + EMAC_DMA->opm_bit.sstc = new_state; + break; + } + + case EMAC_DMA_OPS_FLUSH_TRANSMIT_FIFO: + { + EMAC_DMA->opm_bit.ftf = new_state; + temp = EMAC_DMA->opm; + emac_delay(1); + EMAC_DMA->opm = temp; + break; + } + + case EMAC_DMA_OPS_TRANSMIT_STORE_FORWARD: + { + EMAC_DMA->opm_bit.tsf = new_state; + break; + } + + case EMAC_DMA_OPS_RECEIVE_FLUSH_DISABLE: + { + EMAC_DMA->opm_bit.dfrf = new_state; + break; + } + + case EMAC_DMA_OPS_RECEIVE_STORE_FORWARD: + { + EMAC_DMA->opm_bit.rsf = new_state; + break; + } + + case EMAC_DMA_OPS_DROP_ERROR_DISABLE: + { + EMAC_DMA->opm_bit.dt = new_state; + break; + } + } +} + +/** + * @brief set receive dma threshold + * @param value: receive threshold + * this parameter can be one of the following values: + * - EMAC_DMA_RX_THRESHOLD_64_BYTES + * - EMAC_DMA_RX_THRESHOLD_32_BYTES + * - EMAC_DMA_RX_THRESHOLD_96_BYTES + * - EMAC_DMA_RX_THRESHOLD_128_BYTES + * @retval none + */ +void emac_dma_receive_threshold_set(emac_dma_receive_threshold_type value) +{ + EMAC_DMA->opm_bit.rtc = value; +} + +/** + * @brief set transmit dma threshold + * @param value: transmit threshold + * this parameter can be one of the following values: + * - EMAC_DMA_TX_THRESHOLD_64_BYTES + * - EMAC_DMA_TX_THRESHOLD_128_BYTES + * - EMAC_DMA_TX_THRESHOLD_192_BYTES + * - EMAC_DMA_TX_THRESHOLD_256_BYTES + * - EMAC_DMA_TX_THRESHOLD_40_BYTES + * - EMAC_DMA_TX_THRESHOLD_32_BYTES + * - EMAC_DMA_TX_THRESHOLD_24_BYTES + * - EMAC_DMA_TX_THRESHOLD_16_BYTES + * @retval none + */ +void emac_dma_transmit_threshold_set(emac_dma_transmit_threshold_type value) +{ + EMAC_DMA->opm_bit.ttc = value; +} + +/** + * @brief enable dma interrupt + * @param it: interrupt type + * this parameter can be one of the following values: + * - EMAC_DMA_INTERRUPT_TX + * - EMAC_DMA_INTERRUPT_TX_STOP + * - EMAC_DMA_INTERRUPT_TX_UNAVAILABLE + * - EMAC_DMA_INTERRUPT_TX_JABBER + * - EMAC_DMA_INTERRUPT_RX_OVERFLOW + * - EMAC_DMA_INTERRUPT_TX_UNDERFLOW + * - EMAC_DMA_INTERRUPT_RX + * - EMAC_DMA_INTERRUPT_RX_UNAVAILABLE + * - EMAC_DMA_INTERRUPT_RX_STOP + * - EMAC_DMA_INTERRUPT_RX_TIMEOUT + * - EMAC_DMA_INTERRUPT_TX_EARLY + * - EMAC_DMA_INTERRUPT_FATAL_BUS_ERROR + * - EMAC_DMA_INTERRUPT_RX_EARLY + * - EMAC_DMA_INTERRUPT_ABNORMAL_SUMMARY + * - EMAC_DMA_INTERRUPT_NORMAL_SUMMARY + * @param new_state: TRUE or FALSE + * @retval none + */ +void emac_dma_interrupt_enable(emac_dma_interrupt_type it, confirm_state new_state) +{ + switch(it) + { + case EMAC_DMA_INTERRUPT_TX: + { + EMAC_DMA->ie_bit.tie = new_state; + break; + } + case EMAC_DMA_INTERRUPT_TX_STOP: + { + EMAC_DMA->ie_bit.tse = new_state; + break; + } + case EMAC_DMA_INTERRUPT_TX_UNAVAILABLE: + { + EMAC_DMA->ie_bit.tue = new_state; + break; + } + case EMAC_DMA_INTERRUPT_TX_JABBER: + { + EMAC_DMA->ie_bit.tje = new_state; + break; + } + case EMAC_DMA_INTERRUPT_RX_OVERFLOW: + { + EMAC_DMA->ie_bit.ove = new_state; + break; + } + case EMAC_DMA_INTERRUPT_TX_UNDERFLOW: + { + EMAC_DMA->ie_bit.une = new_state; + break; + } + case EMAC_DMA_INTERRUPT_RX: + { + EMAC_DMA->ie_bit.rie = new_state; + break; + } + case EMAC_DMA_INTERRUPT_RX_UNAVAILABLE: + { + EMAC_DMA->ie_bit.rbue = new_state; + break; + } + case EMAC_DMA_INTERRUPT_RX_STOP: + { + EMAC_DMA->ie_bit.rse = new_state; + break; + } + case EMAC_DMA_INTERRUPT_RX_TIMEOUT: + { + EMAC_DMA->ie_bit.rwte = new_state; + break; + } + case EMAC_DMA_INTERRUPT_TX_EARLY: + { + EMAC_DMA->ie_bit.eie = new_state; + break; + } + case EMAC_DMA_INTERRUPT_FATAL_BUS_ERROR: + { + EMAC_DMA->ie_bit.fbee = new_state; + break; + } + case EMAC_DMA_INTERRUPT_RX_EARLY: + { + EMAC_DMA->ie_bit.ere = new_state; + break; + } + case EMAC_DMA_INTERRUPT_ABNORMAL_SUMMARY: + { + EMAC_DMA->ie_bit.aie = new_state; + break; + } + case EMAC_DMA_INTERRUPT_NORMAL_SUMMARY: + { + EMAC_DMA->ie_bit.nie = new_state; + break; + } + } +} + +/** + * @brief get missed frames by the controller + * @param none + * @retval missed frames by the controller + */ +uint16_t emac_dma_controller_missing_frame_get(void) +{ + uint16_t number = EMAC_DMA->mfbocnt_bit.mfc; + return number; +} + +/** + * @brief get overflow bit for missed frame counter + * @param none + * @retval overflow bit for missed frame counter + */ +uint8_t emac_dma_missing_overflow_bit_get(void) +{ + uint8_t number = EMAC_DMA->mfbocnt_bit.obmfc; + return number; +} + +/** + * @brief get missed frames by the application + * @param none + * @retval missed frames by the application + */ +uint16_t emac_dma_application_missing_frame_get(void) +{ + uint16_t number = EMAC_DMA->mfbocnt_bit.ofc; + return number; +} + +/** + * @brief get overflow bit for FIFO overflow counter + * @param none + * @retval overflow bit for FIFO overflow counter + */ +uint8_t emac_dma_fifo_overflow_bit_get(void) +{ + uint8_t number = EMAC_DMA->mfbocnt_bit.obfoc; + return number; +} + +/** + * @brief get overflow bit for FIFO overflow counter + * @param transfer type: receive/transmit type + * this parameter can be one of the following values: + * - EMAC_DMA_TX_DESCRIPTOR + * - EMAC_DMA_RX_DESCRIPTOR + * - EMAC_DMA_TX_BUFFER + * - EMAC_DMA_RX_BUFFER + * @retval memory address + */ +uint32_t emac_dma_tansfer_address_get(emac_dma_transfer_address_type transfer_type) +{ + uint32_t address = 0; + + switch(transfer_type) + { + case EMAC_DMA_TX_DESCRIPTOR: + { + address = EMAC_DMA->ctd_bit.htdap; + break; + } + case EMAC_DMA_RX_DESCRIPTOR: + { + address = EMAC_DMA->crd_bit.hrdap; + break; + } + case EMAC_DMA_TX_BUFFER: + { + address = EMAC_DMA->ctbaddr_bit.htbap; + break; + } + case EMAC_DMA_RX_BUFFER: + { + address = EMAC_DMA->crbaddr_bit.hrbap; + break; + } + } + return address; +} + +/** + * @brief alternate dma descriptor size + * @param new_state: TRUE or FALSE + * @retval none + */ +void emac_dma_alternate_desc_size(confirm_state new_state) +{ + EMAC_DMA->bm_bit.atds = new_state; +} + +/** + * @brief reset all counter + * @param none + * @retval none + */ +void emac_mmc_counter_reset(void) +{ + EMAC_MMC->ctrl_bit.rc = TRUE; +} + +/** + * @brief counter stop counting from zero when it reaches maximum + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_mmc_rollover_stop(confirm_state new_state) +{ + EMAC_MMC->ctrl_bit.scr = new_state; +} + +/** + * @brief enable reset on read + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_mmc_reset_on_read_enable(confirm_state new_state) +{ + EMAC_MMC->ctrl_bit.rr = new_state; +} + +/** + * @brief freeze mmc counter + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_mmc_counter_freeze(confirm_state new_state) +{ + EMAC_MMC->ctrl_bit.fmc = new_state; +} + +/** + * @brief interupt status of received frames + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - MMC_RX_CRC_ERROR + * - MMC_RX_ALIGN_ERROR + * - MMC_RX_GOOD_UNICAST + * @retval the new state of usart_flag (SET or RESET). + */ +flag_status emac_mmc_received_status_get(uint32_t flag) +{ + if(EMAC_MMC->ri & flag) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief interupt status of transmit frames + * @param transmit_type: transmit type. + * this parameter can be one of the following values: + * - MMC_TX_SINGLE_COL + * - MMC_TX_MULTIPLE_COL + * - MMC_TX_GOOD_FRAMES + * @retval the new state of usart_flag (SET or RESET). + */ +flag_status emac_mmc_transmit_status_get(uint32_t flag) +{ + if(EMAC_MMC->ti & flag) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief mask received mmc interrupt + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - MMC_RX_CRC_ERROR + * - MMC_RX_ALIGN_ERROR + * - MMC_RX_GOOD_UNICAST + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_mmc_received_interrupt_mask_set(uint32_t flag, confirm_state new_state) +{ + switch(flag) + { + case MMC_RX_CRC_ERROR: + { + EMAC_MMC->rim_bit.rcefcim = new_state; + break; + } + case MMC_RX_ALIGN_ERROR: + { + EMAC_MMC->rim_bit.raefacim = new_state; + break; + } + case MMC_RX_GOOD_UNICAST: + { + EMAC_MMC->rim_bit.rugfcim = new_state; + break; + } + } +} + +/** + * @brief mask transmit mmc interrupt + * @param transmit_type: transmit type. + * this parameter can be one of the following values: + * - MMC_TX_SINGLE_COL + * - MMC_TX_MULTIPLE_COL + * - MMC_TX_GOOD_FRAMES + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_mmc_transmit_interrupt_mask_set(uint32_t flag, confirm_state new_state) +{ + switch(flag) + { + case MMC_TX_SINGLE_COL: + { + EMAC_MMC->tim_bit.tscgfcim = new_state; + break; + } + case MMC_TX_MULTIPLE_COL: + { + EMAC_MMC->tim_bit.tmcgfcim = new_state; + break; + } + case MMC_TX_GOOD_FRAMES: + { + EMAC_MMC->tim_bit.tgfcim = new_state; + break; + } + } +} + +/** + * @brief get good frame numbers as single collision occurs. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - MMC_TX_SINGLE_COL + * - MMC_TX_MULTIPLE_COL + * - MMC_TX_GOOD_FRAMES + * @retval good frames + */ +uint32_t emac_mmc_transmit_good_frames_get(uint32_t flag) +{ + uint32_t good_frames = MMC_TX_GOOD_FRAMES; + + switch(flag) + { + case MMC_TX_SINGLE_COL: + { + good_frames = EMAC_MMC->tfscc_bit.tgfscc; + break; + } + case MMC_TX_MULTIPLE_COL: + { + good_frames = EMAC_MMC->tfmscc_bit.tgfmscc; + break; + } + case MMC_TX_GOOD_FRAMES: + { + good_frames = EMAC_MMC->tfcnt_bit.tgfc; + break; + } + } + return good_frames; +} + +/** + * @brief get good frame numbers as single collision occurs. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - MMC_RX_CRC_ERROR + * - MMC_RX_ALIGN_ERROR + * - MMC_RX_GOOD_UNICAST + * @retval good frames + */ +uint32_t emac_mmc_received_error_frames_get(uint32_t flag) +{ + uint32_t error_frames = MMC_RX_GOOD_UNICAST; + + switch(flag) + { + case MMC_RX_CRC_ERROR: + { + error_frames = EMAC_MMC->rfcecnt_bit.rfcec; + break; + } + case MMC_RX_ALIGN_ERROR: + { + error_frames = EMAC_MMC->rfaecnt_bit.rfaec; + break; + } + case MMC_RX_GOOD_UNICAST: + { + error_frames = EMAC_MMC->rgufcnt_bit.rgufc; + break; + } + } + return error_frames; +} + +/** + * @brief enable timestamp. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_timestamp_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.te = new_state; +} + +/** + * @brief enable timestamp fine update. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_timestamp_fine_update_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.tfcu = new_state; +} + +/** + * @brief initialize timestamp time system. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_timestamp_system_time_init(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.ti = new_state; +} + +/** + * @brief update timestamp time system. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_timestamp_system_time_update(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.tu = new_state; +} + +/** + * @brief enable timestamp interrupt trigger. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_interrupt_trigger_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.tite = new_state; +} + +/** + * @brief update timestamp addend register. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_addend_register_update(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.aru = new_state; +} + +/** + * @brief enable timestamp snapshot for all received frames. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_snapshot_received_frames_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.etaf = new_state; +} + +/** + * @brief enable digital rollover. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_subsecond_rollover_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.tdbrc = new_state; +} + +/** + * @brief enable packet snooping for version 2. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_psv2_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.eppv2f = new_state; +} + +/** + * @brief enable snapshot over emac. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_snapshot_emac_frames_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.eppef = new_state; +} + +/** + * @brief enable snapshot for ipv6 frames. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_snapshot_ipv6_frames_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.eppfsip6u = new_state; +} + +/** + * @brief enable snapshot for ipv4 frames. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_snapshot_ipv4_frames_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.eppfsip4u = new_state; +} + +/** + * @brief enable snapshot for event message. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_snapshot_event_message_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.etsfem = new_state; +} + +/** + * @brief enable snapshot for message relevant to master + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_snapshot_master_event_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.esfmrtm = new_state; +} + +/** + * @brief set clock node type + * @param node: select ptp packets for taking snapshot + * this parameter can be one of the following values: + * - EMAC_PTP_NORMAL_CLOCK + * - EMAC_PTP_BOUNDARY_CLOCK + * - EMAC_PTP_END_TO_END_CLOCK + * - EMAC_PTP_PEER_TO_PEER_CLOCK + * @retval none + */ +void emac_ptp_clock_node_set(emac_ptp_clock_node_type node) +{ + EMAC_PTP->tsctrl_bit.sppfts = node; +} + +/** + * @brief enable ptp frame filtering mac address + * @param new_state: TRUE or FALSE. + * @retval none + */ +void emac_ptp_mac_address_filter_enable(confirm_state new_state) +{ + EMAC_PTP->tsctrl_bit.emafpff = new_state; +} + +/** + * @brief check whether the specified emac ptp flag is set or not. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - EMAC_PTP_TI_FLAG: time stamp initialized flag + * - EMAC_PTP_TU_FLAG: time stamp updtated flag + * - EMAC_PTP_ARU_FLAG: transmit data buffer empty flag + * @retval the new state of usart_flag (SET or RESET). + */ +flag_status emac_ptp_flag_get(uint32_t flag) +{ + if(EMAC_PTP->tsctrl & flag) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief set subsecond increment value + * @param value: add to subsecond value for every update + * @retval none + */ +void emac_ptp_subsecond_increment_set(uint8_t value) +{ + EMAC_PTP->ssinc_bit.ssiv = value; +} + +/** + * @brief get system time second + * @param none + * @retval system time second + */ +uint32_t emac_ptp_system_second_get(void) +{ + uint32_t second = EMAC_PTP->tsh_bit.ts; + return second; +} + +/** + * @brief get system time subsecond + * @param none + * @retval system time subsecond + */ +uint32_t emac_ptp_system_subsecond_get(void) +{ + uint32_t subsecond = EMAC_PTP->tsl_bit.tss; + return subsecond; +} + +/** + * @brief get system time sign + * @param none + * @retval TRUE or FALSE + */ +confirm_state emac_ptp_system_time_sign_get(void) +{ + if(EMAC_PTP->tsl_bit.ast) + { + return TRUE; + } + else + { + return FALSE; + } +} + +/** + * @brief set system time + * @param sign: plus or minus + * @param second: system time second + * @param subsecond: system time subsecond + * @retval none + */ +void emac_ptp_system_time_set(uint32_t sign, uint32_t second, uint32_t subsecond) +{ + EMAC_PTP->tslud_bit.ast = sign ? 1 : 0; + EMAC_PTP->tshud_bit.ts = second; + EMAC_PTP->tslud_bit.tss = subsecond; +} + +/** + * @brief set time stamp addend + * @param value: to achieve time synchronization + * @retval none + */ +void emac_ptp_timestamp_addend_set(uint32_t value) +{ + EMAC_PTP->tsad_bit.tar = value; +} + +/** + * @brief set target time stamp high + * @param value: to set target time second + * @retval none + */ +void emac_ptp_target_second_set(uint32_t value) +{ + EMAC_PTP->tth_bit.ttsr = value; +} + +/** + * @brief set target time stamp low + * @param value: to set target time nanosecond + * @retval none + */ +void emac_ptp_target_nanosecond_set(uint32_t value) +{ + EMAC_PTP->ttl_bit.ttlr = value; +} + +/** + * @brief set target time stamp low + * @param status: type of status + * this parameter can be one of the following values: + * - EMAC_PTP_SECOND_OVERFLOW + * - EMAC_PTP_TARGET_TIME_REACH + * @retval TRUE or FALSE + */ +confirm_state emac_ptp_timestamp_status_get(emac_ptp_timestamp_status_type status) +{ + switch(status) + { + case EMAC_PTP_SECOND_OVERFLOW: + { + if(EMAC_PTP->tssr_bit.tso) + { + return TRUE; + } + else + { + return FALSE; + } + } + case EMAC_PTP_TARGET_TIME_REACH: + { + if(EMAC_PTP->tssr_bit.tttr) + { + return TRUE; + } + else + { + return FALSE; + } + } + } + return FALSE; +} + +/** + * @brief set pps frequency + * @param freq: pps frequency + * this parameter can be one of the following values: + * - EMAC_PTP_PPS_1HZ + * - EMAC_PTP_PPS_2HZ + * - EMAC_PTP_PPS_4HZ + * - EMAC_PTP_PPS_8HZ + * - EMAC_PTP_PPS_16HZ + * - EMAC_PTP_PPS_32HZ + * - EMAC_PTP_PPS_64HZ + * - EMAC_PTP_PPS_128HZ + * - EMAC_PTP_PPS_256HZ + * - EMAC_PTP_PPS_512HZ + * - EMAC_PTP_PPS_1024HZ + * - EMAC_PTP_PPS_2048HZ + * - EMAC_PTP_PPS_4096HZ + * - EMAC_PTP_PPS_8192HZ + * - EMAC_PTP_PPS_16384HZ + * - EMAC_PTP_PPS_32768HZ + * @retval none + */ +void emac_ptp_pps_frequency_set(emac_ptp_pps_control_type freq) +{ + EMAC_PTP->ppscr_bit.pofc = freq; +} + +/** + * @brief this is delay function base on system clock. + * @param delay: delay time + * @retval none + */ +static void emac_delay(uint32_t delay) +{ + __IO uint32_t delay_time = delay * (system_core_clock / 8 / 1000); + do + { + __NOP(); + } + while(delay_time --); +} + +/** + * @brief check whether the specified emac dma flag is set or not. + * @param dma_flag: specifies the emac dma flag to check. + * this parameter can be one of emac dma flag status: + * - EMAC_DMA_TI_FLAG + * - EMAC_DMA_TPS_FLAG + * - EMAC_DMA_TBU_FLAG + * - EMAC_DMA_TJT_FLAG + * - EMAC_DMA_OVF_FLAG + * - EMAC_DMA_UNF_FLAG + * - EMAC_DMA_RI_FLAG + * - EMAC_DMA_RBU_FLAG + * - EMAC_DMA_RPS_FLAG + * - EMAC_DMA_RWT_FLAG + * - EMAC_DMA_ETI_FLAG + * - EMAC_DMA_FBEI_FLAG + * - EMAC_DMA_ERI_FLAG + * - EMAC_DMA_AIS_FLAG + * - EMAC_DMA_NIS_FLAG + * @retval the new state of dma_flag (SET or RESET). + */ +flag_status emac_dma_flag_get(uint32_t dma_flag) +{ + flag_status status = RESET; + + if(EMAC_DMA->sts & dma_flag) + status = SET; + /* return the new state (SET or RESET) */ + return status; +} + +/** + * @brief check whether the specified emac dma interrupt flag is set or not. + * @param dma_flag: specifies the emac dma flag to check. + * this parameter can be one of emac dma flag status: + * - EMAC_DMA_TI_FLAG + * - EMAC_DMA_TPS_FLAG + * - EMAC_DMA_TBU_FLAG + * - EMAC_DMA_TJT_FLAG + * - EMAC_DMA_OVF_FLAG + * - EMAC_DMA_UNF_FLAG + * - EMAC_DMA_RI_FLAG + * - EMAC_DMA_RBU_FLAG + * - EMAC_DMA_RPS_FLAG + * - EMAC_DMA_RWT_FLAG + * - EMAC_DMA_ETI_FLAG + * - EMAC_DMA_FBEI_FLAG + * - EMAC_DMA_ERI_FLAG + * - EMAC_DMA_AIS_FLAG + * - EMAC_DMA_NIS_FLAG + * @retval the new state of dma_flag (SET or RESET). + */ +flag_status emac_dma_interrupt_flag_get(uint32_t dma_flag) +{ + flag_status status = RESET; + switch(dma_flag) + { + case EMAC_DMA_TI_FLAG: + case EMAC_DMA_TBU_FLAG: + case EMAC_DMA_RI_FLAG: + case EMAC_DMA_ERI_FLAG: + if((EMAC_DMA->sts & dma_flag) && + (EMAC_DMA->ie & dma_flag) && + (EMAC_DMA->sts & EMAC_DMA_NIS_FLAG)) + status = SET; + break; + case EMAC_DMA_TPS_FLAG: + case EMAC_DMA_TJT_FLAG: + case EMAC_DMA_OVF_FLAG: + case EMAC_DMA_UNF_FLAG: + case EMAC_DMA_RBU_FLAG: + case EMAC_DMA_RPS_FLAG: + case EMAC_DMA_RWT_FLAG: + case EMAC_DMA_ETI_FLAG: + case EMAC_DMA_FBEI_FLAG: + if((EMAC_DMA->sts & dma_flag) && + (EMAC_DMA->ie & dma_flag) && + (EMAC_DMA->sts & EMAC_DMA_AIS_FLAG)) + status = SET; + break; + default: + break; + } + /* return the new state (SET or RESET) */ + return status; +} + +/** + * @brief clear the emac dma flag. + * @param dma_flag: specifies the emac dma flags to clear. + * this parameter can be any combination of the following values: + * - EMAC_DMA_TI_FLAG + * - EMAC_DMA_TPS_FLAG + * - EMAC_DMA_TBU_FLAG + * - EMAC_DMA_TJT_FLAG + * - EMAC_DMA_OVF_FLAG + * - EMAC_DMA_UNF_FLAG + * - EMAC_DMA_RI_FLAG + * - EMAC_DMA_RBU_FLAG + * - EMAC_DMA_RPS_FLAG + * - EMAC_DMA_RWT_FLAG + * - EMAC_DMA_ETI_FLAG + * - EMAC_DMA_FBEI_FLAG + * - EMAC_DMA_ERI_FLAG + * - EMAC_DMA_AIS_FLAG + * - EMAC_DMA_NIS_FLAG + * @retval none + */ +void emac_dma_flag_clear(uint32_t dma_flag) +{ + EMAC_DMA->sts = dma_flag; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +#endif + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_ertc.c b/armlib/at32_sys/drivers/src/at32f435_437_ertc.c new file mode 100644 index 000000000..535ef581c --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_ertc.c @@ -0,0 +1,1602 @@ +/** + ************************************************************************** + * @file at32f435_437_ertc.c + * @brief contains all the functions for the ertc firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_ertc.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup ERTC + * @brief ERTC driver modules + * @{ + */ + +#ifdef ERTC_MODULE_ENABLED + +/** @defgroup ERTC_private_functions + * @{ + */ + +#define ERTC_TIMEOUT ((uint32_t) 0x00360000) + +/** + * @brief number conversion to bcd code. + * @param num: number(0~99) + * @retval bcd code. + */ +uint8_t ertc_num_to_bcd(uint8_t num) +{ + uint8_t bcd_h = 0, bcd_l = 0; + + bcd_h = num / 10; + bcd_l = num % 10; + + return ((uint8_t)(bcd_h << 4) | bcd_l); +} + +/** + * @brief bcd code conversion to number. + * @param bcd: bcd code(0~99). + * @retval number. + */ +uint8_t ertc_bcd_to_num(uint8_t bcd) +{ + return ((((uint8_t)(bcd & (uint8_t)0xF0) >> 4) * 10) + (bcd & (uint8_t)0x0F)); +} + +/** + * @brief enable write protection. + * @param none. + * @retval none + */ +void ertc_write_protect_enable(void) +{ + ERTC->wp = 0xFF; +} + +/** + * @brief disable write protection. + * @param none. + * @retval none + */ +void ertc_write_protect_disable(void) +{ + ERTC->wp = 0xCA; + ERTC->wp = 0x53; +} + +/** + * @brief ertc wait register update finish. + * @param none. + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_wait_update(void) +{ + uint32_t timeout = ERTC_TIMEOUT * 2; + + /* clear updf flag */ + ERTC->sts = ~(ERTC_UPDF_FLAG | 0x00000080) | (ERTC->sts_bit.imen << 7); + + while(ERTC->sts_bit.updf == 0) + { + if(timeout == 0) + { + return ERROR; + } + + timeout--; + } + + return SUCCESS; +} + +/** + * @brief ertc wait flag status. + * @param flag: flag to wait. + * this parameter can be one of the following values: + * - ERTC_ALAWF_FLAG: alarm a register allows write flag. + * - ERTC_ALBWF_FLAG: alarm b register allows write flag. + * - ERTC_WATWF_FLAG: wakeup timer register allows write flag. + * - ERTC_TADJF_FLAG: time adjustment flag. + * - ERTC_CALUPDF_FLAG: calibration value update completed flag. + * @param status: status to wait. + * this parameter can be one of the following values: + * - SET. + * - RESET. + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_wait_flag(uint32_t flag, flag_status status) +{ + uint32_t timeout = ERTC_TIMEOUT; + + while(ertc_flag_get(flag) == status) + { + if(timeout == 0) + { + /* enable write protection */ + ertc_write_protect_enable(); + + return ERROR; + } + + timeout--; + } + + return SUCCESS; +} + +/** + * @brief ertc enter init mode. + * @param none. + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_init_mode_enter(void) +{ + uint32_t timeout = ERTC_TIMEOUT * 2; + + if(ERTC->sts_bit.imf == 0) + { + /* enter init mode */ + ERTC->sts = 0xFFFFFFFF; + + while(ERTC->sts_bit.imf == 0) + { + if(timeout == 0) + { + /* enable write protection */ + ertc_write_protect_enable(); + + return ERROR; + } + + timeout--; + } + } + + return SUCCESS; +} + +/** + * @brief ertc exit init mode. + * @param none. + * @retval none. + */ +void ertc_init_mode_exit(void) +{ + ERTC->sts = 0xFFFFFF7F; +} + +/** + * @brief ertc reset all register. + * @param none. + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_reset(void) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl = (uint32_t)0x00000000; + + /* enter init mode */ + if(ertc_init_mode_enter() != SUCCESS) + { + return ERROR; + } + + /* reset register */ + ERTC->time = (uint32_t)0x00000000; + ERTC->date = (uint32_t)0x00002101; + ERTC->ctrl = (uint32_t)0x00000000; + ERTC->div = (uint32_t)0x007F00FF; + ERTC->wat = (uint32_t)0x0000FFFF; + ERTC->ccal = (uint32_t)0x00000000; + ERTC->ala = (uint32_t)0x00000000; + ERTC->alb = (uint32_t)0x00000000; + ERTC->tadj = (uint32_t)0x00000000; + ERTC->scal = (uint32_t)0x00000000; + ERTC->tamp = (uint32_t)0x00000000; + ERTC->alasbs = (uint32_t)0x00000000; + ERTC->albsbs = (uint32_t)0x00000000; + ERTC->sts = (uint32_t)0x00000000; + + /* wait calendar update */ + ertc_wait_update(); + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief ertc division set. + * @param div_a: division a (0~0x7F). + * @param div_b: division b (0~0x7FFF). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_divider_set(uint16_t div_a, uint16_t div_b) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + /* enter init mode */ + if(ertc_init_mode_enter() != SUCCESS) + { + return ERROR; + } + + /* config the ertc divider */ + ERTC->div_bit.diva = div_a; + ERTC->div_bit.divb = div_b; + + /* exit init mode */ + ertc_init_mode_exit(); + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief ertc hour mode set. + * @param mode: hour mode. + * this parameter can be one of the following values: + * - ERTC_HOUR_MODE_24: 24-hour format. + * - ERTC_HOUR_MODE_12: 12-hour format. + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_hour_mode_set(ertc_hour_mode_set_type mode) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + /* enter init mode */ + if(ertc_init_mode_enter() != SUCCESS) + { + return ERROR; + } + + /* write register */ + ERTC->ctrl_bit.hm = mode; + + /* exit init mode */ + ertc_init_mode_exit(); + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief set date. + * @param year: year (0~99). + * @param month: month (1~12). + * @param date: date (1~31). + * @param week: week (1~7). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_date_set(uint8_t year, uint8_t month, uint8_t date, uint8_t week) +{ + ertc_reg_date_type reg; + + reg.date = 0; + + reg.date_bit.y = ertc_num_to_bcd(year); + reg.date_bit.m = ertc_num_to_bcd(month); + reg.date_bit.d = ertc_num_to_bcd(date); + reg.date_bit.wk = week; + + /* disable write protection */ + ertc_write_protect_disable(); + + /* enter init mode */ + if(ertc_init_mode_enter() != SUCCESS) + { + return ERROR; + } + + /* set the ertc_date register */ + ERTC->date = reg.date; + + /* exit init mode */ + ertc_init_mode_exit(); + + if(ERTC->ctrl_bit.dren == 0) + { + ertc_wait_update(); + } + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief set time. + * @param hour: hour (0~23). + * @param min: minute (0~59). + * @param sec: second (0~59). + * @param ampm: hour mode. + * this parameter can be one of the following values: + * - ERTC_24H: 24-hour format. + * - ERTC_AM: 12-hour format, ante meridiem. + * - ERTC_PM: 12-hour format, post meridiem. + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_time_set(uint8_t hour, uint8_t min, uint8_t sec, ertc_am_pm_type ampm) +{ + ertc_reg_time_type reg; + + reg.time = 0; + + reg.time_bit.h = ertc_num_to_bcd(hour); + reg.time_bit.m = ertc_num_to_bcd(min); + reg.time_bit.s = ertc_num_to_bcd(sec); + reg.time_bit.ampm = ampm; + + /* disable write protection */ + ertc_write_protect_disable(); + + /* enter init mode */ + if(ertc_init_mode_enter() != SUCCESS) + { + return ERROR; + } + + ERTC->time = reg.time; + + /* exit init mode */ + ertc_init_mode_exit(); + + if(ERTC->ctrl_bit.dren == 0) + { + ertc_wait_update(); + } + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief get calendar + * @param time: ertc time. + * @retval none. + */ +void ertc_calendar_get(ertc_time_type* time) +{ + ertc_reg_time_type reg_tm; + ertc_reg_date_type reg_dt; + + reg_tm.time = ERTC->time; + reg_dt.date = ERTC->date; + + time->hour = ertc_bcd_to_num(reg_tm.time_bit.h); + time->min = ertc_bcd_to_num(reg_tm.time_bit.m); + time->sec = ertc_bcd_to_num(reg_tm.time_bit.s); + time->ampm = (ertc_am_pm_type)reg_tm.time_bit.ampm; + + time->year = ertc_bcd_to_num(reg_dt.date_bit.y); + time->month = ertc_bcd_to_num(reg_dt.date_bit.m); + time->day = ertc_bcd_to_num(reg_dt.date_bit.d); + time->week = reg_dt.date_bit.wk; +} + +/** + * @brief get current sub second. + * @param none. + * @retval sub second. + */ +uint32_t ertc_sub_second_get(void) +{ + uint32_t reg = 0; + + reg = ERTC->sbs; + + (void) (ERTC->date); + + return (reg); +} + +/** + * @brief set which bits are irrelevant to the alarm match. + * @param alarm_x: select the alarm. + * this parameter can be one of the following values: + * - ERTC_ALA: alarm a. + * - ERTC_ALB: alarm b. + * @param mask: select which bits are irrelevant to the alarm match. + * this parameter can be one of the following values: + * - ERTC_ALARM_MASK_NONE: match all. + * - ERTC_ALARM_MASK_SEC: don't match seconds. + * - ERTC_ALARM_MASK_MIN: don't match minute. + * - ERTC_ALARM_MASK_HOUR: don't match hour. + * - ERTC_ALARM_MASK_DATE_WEEK: don't match date or week. + * - ERTC_ALARM_MASK_ALL: don't match all. + * @param alarm: alarm para. + * @retval none. + */ +void ertc_alarm_mask_set(ertc_alarm_type alarm_x, uint32_t mask) +{ + uint32_t reg; + + /* disable write protection */ + ertc_write_protect_disable(); + + if(alarm_x == ERTC_ALA) + { + reg = ERTC->ala; + + reg &= ~ERTC_ALARM_MASK_ALL; + reg |= mask; + + ERTC->ala= reg; + } + else + { + reg = ERTC->alb; + + reg &= ~ERTC_ALARM_MASK_ALL; + reg |= mask; + + ERTC->alb= reg; + } + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief alarm week or date mode select. + * @param alarm_x: select the alarm. + * this parameter can be one of the following values: + * - ERTC_ALA: alarm a. + * - ERTC_ALB: alarm b. + * @param wk: week or date mode select. + * this parameter can be one of the following values: + * - ERTC_SLECT_DATE: slect date mode. + * - ERTC_SLECT_WEEK: slect week mode. + * @retval none. + */ +void ertc_alarm_week_date_select(ertc_alarm_type alarm_x, ertc_week_date_select_type wk) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + if(alarm_x == ERTC_ALA) + { + ERTC->ala_bit.wksel = wk; + } + else + { + ERTC->alb_bit.wksel = wk; + } + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set alarm. + * @param alarm_x: select the alarm. + * this parameter can be one of the following values: + * - ERTC_ALA: alarm a. + * - ERTC_ALB: alarm b. + * @param week_day: week or date. + * - week: 1~7. + * - date: 1~31. + * @param hour: hour (0~23). + * @param min: minute (0~59). + * @param sec: second (0~59). + * @param ampm: hour mode. + * this parameter can be one of the following values: + * - ERTC_24H: 24-hour format. + * - ERTC_AM: 12-hour format, ante meridiem. + * - ERTC_PM: 12-hour format, post meridiem. + * @param alarm: alarm para. + * @retval none. + */ +void ertc_alarm_set(ertc_alarm_type alarm_x, uint8_t week_date, uint8_t hour, uint8_t min, uint8_t sec, ertc_am_pm_type ampm) +{ + ertc_reg_alarm_type reg; + + if(alarm_x == ERTC_ALA) + { + reg.ala = ERTC->ala; + } + else + { + reg.ala = ERTC->alb; + } + + reg.ala_bit.d = ertc_num_to_bcd(week_date); + reg.ala_bit.h = ertc_num_to_bcd(hour); + reg.ala_bit.m = ertc_num_to_bcd(min); + reg.ala_bit.s = ertc_num_to_bcd(sec); + reg.ala_bit.ampm = ampm; + + /* disable write protection */ + ertc_write_protect_disable(); + + if(alarm_x == ERTC_ALA) + { + ERTC->ala= reg.ala; + } + else + { + ERTC->alb = reg.ala; + } + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set alarm sub second. + * @param alarm_x: select the alarm. + * this parameter can be one of the following values: + * - ERTC_ALA: alarm a. + * - ERTC_ALB: alarm b. + * @param value: sub second value. + * @param mask: sub second mask. + * this parameter can be one of the following values: + * - ERTC_ALARM_SBS_MASK_ALL: do not match the sub-second. + * - ERTC_ALARM_SBS_MASK_14_1: only compare bit [0]. + * - ERTC_ALARM_SBS_MASK_14_2: only compare bit [1:0]. + * - ERTC_ALARM_SBS_MASK_14_3: only compare bit [2:0]. + * - ERTC_ALARM_SBS_MASK_14_4: only compare bit [3:0]. + * - ERTC_ALARM_SBS_MASK_14_5: only compare bit [4:0]. + * - ERTC_ALARM_SBS_MASK_14_6: only compare bit [5:0]. + * - ERTC_ALARM_SBS_MASK_14_7: only compare bit [6:0]. + * - ERTC_ALARM_SBS_MASK_14_8: only compare bit [7:0]. + * - ERTC_ALARM_SBS_MASK_14_9: only compare bit [8:0]. + * - ERTC_ALARM_SBS_MASK_14_10: only compare bit [9:0]. + * - ERTC_ALARM_SBS_MASK_14_11: only compare bit [10:0]. + * - ERTC_ALARM_SBS_MASK_14_12: only compare bit [11:0]. + * - ERTC_ALARM_SBS_MASK_14_13: only compare bit [12:0]. + * - ERTC_ALARM_SBS_MASK_14: only compare bit [13:0]. + * - ERTC_ALARM_SBS_MASK_NONE: compare bit [14:0]. + * @retval none. + */ +void ertc_alarm_sub_second_set(ertc_alarm_type alarm_x, uint32_t value, ertc_alarm_sbs_mask_type mask) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + if(alarm_x == ERTC_ALA) + { + ERTC->alasbs_bit.sbsmsk = mask; + ERTC->alasbs_bit.sbs = value; + } + else + { + ERTC->albsbs_bit.sbsmsk = mask; + ERTC->albsbs_bit.sbs = value; + } + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief enable or disable alarm clock. + * @param alarm_x: select the alarm. + * this parameter can be one of the following values: + * - ERTC_ALA: alarm a. + * - ERTC_ALB: alarm b. + * @param new_state (TRUE or FALSE). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_alarm_enable(ertc_alarm_type alarm_x, confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + if(alarm_x == ERTC_ALA) + { + ERTC->ctrl_bit.alaen = new_state; + + if(new_state == FALSE) + { + if(ertc_wait_flag(ERTC_ALAWF_FLAG, RESET) != SUCCESS) + { + return ERROR; + } + } + } + else + { + ERTC->ctrl_bit.alben = new_state; + + if(new_state == FALSE) + { + if(ertc_wait_flag(ERTC_ALBWF_FLAG, RESET) != SUCCESS) + { + return ERROR; + } + } + } + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief get alarm value. + * @param alarm_x: select the alarm. + * this parameter can be one of the following values: + * - ERTC_ALA: alarm a. + * - ERTC_ALB: alarm b. + * @param alarm: alarm para. + * @retval none. + */ +void ertc_alarm_get(ertc_alarm_type alarm_x, ertc_alarm_value_type* alarm) +{ + ertc_reg_alarm_type reg; + + reg.ala = 0; + + if(alarm_x == ERTC_ALA) + { + reg.ala = ERTC->ala; + } + else + { + reg.ala = ERTC->alb; + } + + alarm->day = ertc_bcd_to_num(reg.ala_bit.d); + alarm->week = ertc_bcd_to_num(reg.ala_bit.d); + alarm->hour = ertc_bcd_to_num(reg.ala_bit.h); + alarm->min = ertc_bcd_to_num(reg.ala_bit.m); + alarm->sec = ertc_bcd_to_num(reg.ala_bit.s); + alarm->ampm = (ertc_am_pm_type)reg.ala_bit.ampm; + alarm->week_date_sel = reg.ala_bit.wksel; + alarm->mask = reg.ala & ERTC_ALARM_MASK_ALL; +} + +/** + * @brief get alarm sub second. + * @param alarm_x: select the alarm. + * this parameter can be one of the following values: + * - ERTC_ALA: alarm a. + * - ERTC_ALB: alarm b. + * @retval sub second. + */ +uint32_t ertc_alarm_sub_second_get(ertc_alarm_type alarm_x) +{ + if(alarm_x == ERTC_ALA) + { + return (ERTC->alasbs_bit.sbs); + } + else + { + return (ERTC->albsbs_bit.sbs); + } +} + +/** + * @brief set wakeup timer clock. + * @param clock: wakeup timer clock source. + * this parameter can be one of the following values: + * - ERTC_WAT_CLK_ERTCCLK_DIV16: ERTC_CLK / 16. + * - ERTC_WAT_CLK_ERTCCLK_DIV8: ERTC_CLK / 8. + * - ERTC_WAT_CLK_ERTCCLK_DIV4: ERTC_CLK / 4. + * - ERTC_WAT_CLK_ERTCCLK_DIV2: ERTC_CLK / 2. + * - ERTC_WAT_CLK_CK_B_16BITS: CK_B, wakeup counter = ERTC_WAT + * - ERTC_WAT_CLK_CK_B_17BITS: CK_B, wakeup counter = ERTC_WAT + 65535. + * @retval none. + */ +void ertc_wakeup_clock_set(ertc_wakeup_clock_type clock) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl_bit.watclk = clock; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set wakeup counter. + * @param counter: wakeup counter(0~65535). + * @retval none. + */ +void ertc_wakeup_counter_set(uint32_t counter) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->wat_bit.val = counter; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief get wakeup counter. + * @param none. + * @retval wakeup counter. + */ +uint16_t ertc_wakeup_counter_get(void) +{ + return ERTC->wat_bit.val; +} + +/** + * @brief enable or disable wakeup timer. + * @param new_state (TRUE or FALSE). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_wakeup_enable(confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl_bit.waten = new_state; + + if(new_state == FALSE) + { + if(ertc_wait_flag(ERTC_WATWF_FLAG, RESET) != SUCCESS) + { + return ERROR; + } + } + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief config the smooth calibration. + * @param period: calibration period. + * this parameter can be one of the following values: + * - ERTC_SMOOTH_CAL_PERIOD_32: 32 second calibration period. + * - ERTC_SMOOTH_CAL_PERIOD_16: 16 second calibration period. + * - ERTC_SMOOTH_CAL_PERIOD_8: 8 second calibration period. + * @param clk_add: add clock. + * this parameter can be one of the following values: + * - ERTC_SMOOTH_CAL_CLK_ADD_0: do not increase clock. + * - ERTC_SMOOTH_CAL_CLK_ADD_512: add 512 clocks. + * @param clk_dec: decrease clock(0~511). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_smooth_calibration_config(ertc_smooth_cal_period_type period, ertc_smooth_cal_clk_add_type clk_add, uint32_t clk_dec) +{ + ertc_reg_scal_type reg; + + /* disable write protection */ + ertc_write_protect_disable(); + + if(ertc_wait_flag(ERTC_CALUPDF_FLAG, SET) != SUCCESS) + { + return ERROR; + } + + reg.scal = 0; + + switch (period) + { + case ERTC_SMOOTH_CAL_PERIOD_32: + break; + case ERTC_SMOOTH_CAL_PERIOD_16: + reg.scal_bit.cal16 = 1; + break; + case ERTC_SMOOTH_CAL_PERIOD_8: + reg.scal_bit.cal8 = 1; + break; + default: + break; + } + + reg.scal_bit.add = clk_add; + reg.scal_bit.dec = clk_dec; + + ERTC->scal = reg.scal; + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief set the coarse digital calibration. + * @param dir: calibration direction. + * this parameter can be one of the following values: + * - ERTC_CAL_DIR_POSITIVE: positive calibration. + * - ERTC_CAL_DIR_NEGATIVE: negative calibration. + * @param value: calibration value(0~31). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_coarse_calibration_set(ertc_cal_direction_type dir, uint32_t value) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + /* enter init mode */ + if(ertc_init_mode_enter() == ERROR) + { + return ERROR; + } + + ERTC->ccal_bit.caldir = dir; + + ERTC->ccal_bit.calval = value; + + /* exit init mode */ + ertc_init_mode_exit(); + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief enable or disable coarse calibration. + * @param new_state (TRUE or FALSE). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_coarse_calibration_enable(confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + /* enter init mode */ + if(ertc_init_mode_enter() == ERROR) + { + return ERROR; + } + + ERTC->ctrl_bit.ccalen = new_state; + + /* exit init mode */ + ertc_init_mode_exit(); + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief calibration output source select. + * @param output: output source. + * this parameter can be one of the following values: + * - ERTC_CAL_OUTPUT_512HZ: output 512 hz. + * - ERTC_CAL_OUTPUT_1HZ: output 1 hz. + * @retval none. + */ +void ertc_cal_output_select(ertc_cal_output_select_type output) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl_bit.calosel = output; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief enable or disable calibration output. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void ertc_cal_output_enable(confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl_bit.caloen = new_state; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief adjust the time. + * @param add1s: second operation. + * this parameter can be one of the following values: + * - ERTC_TIME_ADD_NONE: none operation. + * - ERTC_TIME_ADD_1S: add 1 second. + * @param decsbs: decrease sub second(0~0x7FFF). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_time_adjust(ertc_time_adjust_type add1s, uint32_t decsbs) +{ + ertc_reg_tadj_type reg; + + reg.tadj = 0; + + /* disable write protection */ + ertc_write_protect_disable(); + + if(ertc_wait_flag(ERTC_TADJF_FLAG, SET) != SUCCESS) + { + return ERROR; + } + + /* check if the reference clock detection is disabled */ + if(ERTC->ctrl_bit.rcden == 0) + { + reg.tadj_bit.add1s = add1s; + reg.tadj_bit.decsbs = decsbs; + + ERTC->tadj = reg.tadj; + + if(ertc_wait_update() == ERROR) + { + return ERROR; + } + } + else + { + return ERROR; + } + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief config the daylight saving time. + * @param operation: time adjust. + * this parameter can be one of the following values: + * - ERTC_DST_ADD_1H: add 1 hour. + * - ERTC_DST_DEC_1H: dec 1 hour. + * @param save: operation save. + * this parameter can be one of the following values: + * - ERTC_DST_SAVE_0: set the bpr register value to 0. + * - ERTC_DST_SAVE_1: set the bpr register value to 1. + * @retval none. + */ +void ertc_daylight_set(ertc_dst_operation_type operation, ertc_dst_save_type save) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + if(operation == ERTC_DST_ADD_1H) + { + ERTC->ctrl_bit.add1h = 1; + } + else + { + ERTC->ctrl_bit.dec1h = 1; + } + + ERTC->ctrl_bit.bpr = save; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief get the bpr value. + * @param none. + * @retval bpr value. + */ +uint8_t ertc_daylight_bpr_get(void) +{ + return ERTC->ctrl_bit.bpr; +} + +/** + * @brief enable or disable refer clock detect. + * @param new_state (TRUE or FALSE). + * @retval error_status (ERROR or SUCCESS). + */ +error_status ertc_refer_clock_detect_enable(confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + /* enter init mode */ + if(ertc_init_mode_enter() != SUCCESS) + { + return ERROR; + } + + /* write register */ + ERTC->ctrl_bit.rcden = new_state; + + /* exit init mode */ + ertc_init_mode_exit(); + + /* enable write protection */ + ertc_write_protect_enable(); + + return SUCCESS; +} + +/** + * @brief enable or disable direct read mode. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void ertc_direct_read_enable(confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl_bit.dren = new_state; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set the output mode. + * @param source: output source. + * this parameter can be one of the following values: + * - ERTC_OUTPUT_DISABLE: diable output. + * - ERTC_OUTPUT_ALARM_A: output alarm a event. + * - ERTC_OUTPUT_ALARM_B: output alarm b event. + * - ERTC_OUTPUT_WAKEUP: output wakeup event. + * @param polarity: output polarity. + * this parameter can be one of the following values: + * - ERTC_OUTPUT_POLARITY_HIGH: when the event occurs, the output is high. + * - ERTC_OUTPUT_POLARITY_LOW: when the event occurs, the output is low. + * @param type: output type. + * this parameter can be one of the following values: + * - ERTC_OUTPUT_TYPE_OPEN_DRAIN: open drain output. + * - ERTC_OUTPUT_TYPE_PUSH_PULL: push pull output. + * @retval none. + */ +void ertc_output_set(ertc_output_source_type source, ertc_output_polarity_type polarity, ertc_output_type type) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl_bit.outp = polarity; + + ERTC->tamp_bit.outtype = type; + + ERTC->ctrl_bit.outsel = source; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief timestamp detection pin selection. + * @param pin: data register + * this parameter can be one of the following values: + * - ERTC_PIN_PC13: pc13 is used as timestamp detection pin. + * - ERTC_PIN_PA0: pa0 is used as timestamp detection pin. + * @retval data value. + */ +void ertc_timestamp_pin_select(ertc_pin_select_type pin) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->tamp_bit.tspin = pin; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set the timestamp valid edge. + * @param edge: calibration period. + * this parameter can be one of the following values: + * - ERTC_TIMESTAMP_EDGE_RISING : rising edge trigger. + * - ERTC_TIMESTAMP_EDGE_FALLING: falling edge trigger. + * @retval none. + */ +void ertc_timestamp_valid_edge_set(ertc_timestamp_valid_edge_type edge) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl_bit.tsedg = edge; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief enable or disable timestamp. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void ertc_timestamp_enable(confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->ctrl_bit.tsen = new_state; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief get the timestamp. + * @param time: time. + * @param date: date. + * @retval none. + */ +void ertc_timestamp_get(ertc_time_type* time) +{ + ertc_reg_tstm_type tmtime; + ertc_reg_tsdt_type tmdate; + + tmtime.tstm = ERTC->tstm; + tmdate.tsdt = ERTC->tsdt; + + time->year = 0; + time->month = ertc_bcd_to_num(tmdate.tsdt_bit.m); + time->day = ertc_bcd_to_num(tmdate.tsdt_bit.d); + time->week = ertc_bcd_to_num(tmdate.tsdt_bit.wk); + time->hour = ertc_bcd_to_num(tmtime.tstm_bit.h); + time->min = ertc_bcd_to_num(tmtime.tstm_bit.m); + time->sec = ertc_bcd_to_num(tmtime.tstm_bit.s); + time->ampm = (ertc_am_pm_type)tmtime.tstm_bit.ampm; +} + +/** + * @brief get the timestamp sub second. + * @param none. + * @retval timestamp sub second. + */ +uint32_t ertc_timestamp_sub_second_get(void) +{ + return ERTC->tssbs_bit.sbs; +} + +/** + * @brief tamper 1 detection pin selection. + * @param pin: data register + * this parameter can be one of the following values: + * - ERTC_PIN_PC13: pc13 is used as tamper 1 detection pin. + * - ERTC_PIN_PA0: pa0 is used as tamper 1 detection pin. + * @retval data value. + */ +void ertc_tamper_1_pin_select(ertc_pin_select_type pin) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->tamp_bit.tp1pin = pin; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief enable or disable tamper pin pull up. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void ertc_tamper_pull_up_enable(confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->tamp_bit.tppu = !new_state; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set the tamper pin pre-charge time. + * @param precharge: tamper detection pre-charge time + * this parameter can be one of the following values: + * - ERTC_TAMPER_PR_1_ERTCCLK: pre-charge time is 1 ERTC_CLK. + * - ERTC_TAMPER_PR_2_ERTCCLK: pre-charge time is 2 ERTC_CLK. + * - ERTC_TAMPER_PR_4_ERTCCLK: pre-charge time is 4 ERTC_CLK. + * - ERTC_TAMPER_PR_8_ERTCCLK: pre-charge time is 8 ERTC_CLK. + * @retval none. + */ +void ertc_tamper_precharge_set(ertc_tamper_precharge_type precharge) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->tamp_bit.tppr = precharge; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set the tamper filter time. + * @param filter: tamper filter. + * this parameter can be one of the following values: + * - ERTC_TAMPER_FILTER_DISABLE: disable filter function. + * - ERTC_TAMPER_FILTER_2: 2 consecutive samples arw valid, effective tamper event. + * - ERTC_TAMPER_FILTER_4: 4 consecutive samples arw valid, effective tamper event. + * - ERTC_TAMPER_FILTER_8: 8 consecutive samples arw valid, effective tamper event. + * @retval none. + */ +void ertc_tamper_filter_set(ertc_tamper_filter_type filter) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->tamp_bit.tpflt = filter; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set the tamper detection frequency. + * @param freq: tamper detection frequency. + * this parameter can be one of the following values: + * - ERTC_TAMPER_FREQ_DIV_32768: ERTC_CLK / 32768. + * - ERTC_TAMPER_FREQ_DIV_16384: ERTC_CLK / 16384. + * - ERTC_TAMPER_FREQ_DIV_8192: ERTC_CLK / 8192. + * - ERTC_TAMPER_FREQ_DIV_4096: ERTC_CLK / 4096. + * - ERTC_TAMPER_FREQ_DIV_2048: ERTC_CLK / 2048. + * - ERTC_TAMPER_FREQ_DIV_1024: ERTC_CLK / 1024. + * - ERTC_TAMPER_FREQ_DIV_512: ERTC_CLK / 512. + * - ERTC_TAMPER_FREQ_DIV_256: ERTC_CLK / 256. + * @retval none. + */ +void ertc_tamper_detect_freq_set(ertc_tamper_detect_freq_type freq) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->tamp_bit.tpfreq = freq; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief set the tamper trigger. + * @param tamper_x: select the tamper. + * this parameter can be one of the following values: + * - ERTC_TAMPER_1: tamper 1. + * - ERTC_TAMPER_2: tamper 2. + * @param trigger: tamper valid edge. + * this parameter can be one of the following values: + * - ERTC_TAMPER_EDGE_RISING: rising gedge. + * - ERTC_TAMPER_EDGE_FALLING: falling gedge. + * - ERTC_TAMPER_EDGE_LOW: low level. + * - ERTC_TAMPER_EDGE_HIGH: high level. + * @param alarm: alarm para. + * @retval none. + */ +void ertc_tamper_valid_edge_set(ertc_tamper_select_type tamper_x, ertc_tamper_valid_edge_type trigger) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + if(tamper_x == ERTC_TAMPER_1) + { + ERTC->tamp_bit.tp1edg = trigger; + } + else + { + ERTC->tamp_bit.tp2edg = trigger; + } + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief enable or disable trigger timestamp when tamper event occurs. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void ertc_tamper_timestamp_enable(confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + ERTC->tamp_bit.tptsen = new_state; + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief enable or disable tamper. + * @param tamper_x: select the tamper. + * this parameter can be one of the following values: + * - ERTC_TAMPER_1: tamper 1. + * - ERTC_TAMPER_2: tamper 2. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void ertc_tamper_enable(ertc_tamper_select_type tamper_x, confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + if(tamper_x == ERTC_TAMPER_1) + { + ERTC->tamp_bit.tp1en = new_state; + } + else + { + ERTC->tamp_bit.tp2en = new_state; + } + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief enable or disable interrupt. + * @param source: interrupts sources + * this parameter can be any combination of the following values: + * - ERTC_TP_INT: tamper interrupt. + * - ERTC_ALA_INT: alarm a interrupt. + * - ERTC_ALB_INT: alarm b interrupt. + * - ERTC_WAT_INT: wakeup timer interrupt. + * - ERTC_TS_INT: timestamp interrupt. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void ertc_interrupt_enable(uint32_t source, confirm_state new_state) +{ + /* disable write protection */ + ertc_write_protect_disable(); + + if(source & ERTC_TP_INT) + { + if(new_state != FALSE) + { + ERTC->tamp |= ERTC_TP_INT; + } + else + { + ERTC->tamp &= ~ERTC_TP_INT; + } + + source &= ~ERTC_TP_INT; + } + + if(new_state != FALSE) + { + ERTC->ctrl |= source; + } + else + { + ERTC->ctrl &= ~source; + } + + /* enable write protection */ + ertc_write_protect_enable(); +} + +/** + * @brief get interrupt status + * @param source + * this parameter can be one of the following values: + * - ERTC_TP_INT: tamper interrupt. + * - ERTC_ALA_INT: alarm a interrupt. + * - ERTC_ALB_INT: alarm b interrupt. + * - ERTC_WAT_INT: wakeup timer interrupt. + * - ERTC_TS_INT: timestamp interrupt. + * @retval flag_status (SET or RESET) + */ +flag_status ertc_interrupt_get(uint32_t source) +{ + if(source & ERTC_TP_INT) + { + if((ERTC->tamp & ERTC_TP_INT) != RESET) + { + return SET; + } + else + { + return RESET; + } + } + + if((ERTC->ctrl & source) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief get flag status. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - ERTC_ALAWF_FLAG: alarm a register allows write flag. + * - ERTC_ALBWF_FLAG: alarm b register allows write flag. + * - ERTC_WATWF_FLAG: wakeup timer register allows write flag. + * - ERTC_TADJF_FLAG: time adjustment flag. + * - ERTC_INITF_FLAG: calendar initialization flag. + * - ERTC_UPDF_FLAG: calendar update flag. + * - ERTC_IMF_FLAG: enter initialization mode flag. + * - ERTC_ALAF_FLAG: alarm clock a flag. + * - ERTC_ALBF_FLAG: alarm clock b flag. + * - ERTC_WATF_FLAG: wakeup timer flag. + * - ERTC_TSF_FLAG: timestamp flag. + * - ERTC_TSOF_FLAG: timestamp overflow flag. + * - ERTC_TP1F_FLAG: tamper detection 1 flag. + * - ERTC_TP2F_FLAG: tamper detection 2 flag. + * - ERTC_CALUPDF_FLAG: calibration value update completed flag. + * @retval the new state of flag (SET or RESET). + */ +flag_status ertc_flag_get(uint32_t flag) +{ + if((ERTC->sts & flag) != (uint32_t)RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief get interrupt flag status. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - ERTC_ALAF_FLAG: alarm clock a flag. + * - ERTC_ALBF_FLAG: alarm clock b flag. + * - ERTC_WATF_FLAG: wakeup timer flag. + * - ERTC_TSF_FLAG: timestamp flag. + * - ERTC_TP1F_FLAG: tamper detection 1 flag. + * - ERTC_TP2F_FLAG: tamper detection 2 flag. + * @retval the new state of flag (SET or RESET). + */ +flag_status ertc_interrupt_flag_get(uint32_t flag) +{ + __IO uint32_t iten = 0; + + switch(flag) + { + case ERTC_ALAF_FLAG: + iten = ERTC->ctrl_bit.alaien; + break; + case ERTC_ALBF_FLAG: + iten = ERTC->ctrl_bit.albien; + break; + case ERTC_WATF_FLAG: + iten = ERTC->ctrl_bit.watien; + break; + case ERTC_TSF_FLAG: + iten = ERTC->ctrl_bit.tsien; + break; + case ERTC_TP1F_FLAG: + case ERTC_TP2F_FLAG: + iten = ERTC->tamp_bit.tpien; + break; + + default: + break; + } + + if(((ERTC->sts & flag) != (uint32_t)RESET) && (iten)) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief clear flag status + * @param flag: specifies the flag to clear. + * this parameter can be any combination of the following values: + * - ERTC_ALAWF_FLAG: alarm a register allows write flag. + * - ERTC_ALBWF_FLAG: alarm b register allows write flag. + * - ERTC_WATWF_FLAG: wakeup timer register allows write flag. + * - ERTC_TADJF_FLAG: time adjustment flag. + * - ERTC_INITF_FLAG: calendar initialization flag. + * - ERTC_UPDF_FLAG: calendar update flag. + * - ERTC_IMF_FLAG: enter initialization mode flag. + * - ERTC_ALAF_FLAG: alarm clock a flag. + * - ERTC_ALBF_FLAG: alarm clock b flag. + * - ERTC_WATF_FLAG: wakeup timer flag. + * - ERTC_TSF_FLAG: timestamp flag. + * - ERTC_TSOF_FLAG: timestamp overflow flag. + * - ERTC_TP1F_FLAG: tamper detection 1 flag. + * - ERTC_TP2F_FLAG: tamper detection 2 flag. + * - ERTC_CALUPDF_FLAG: calibration value update completed flag. + * @retval none + */ +void ertc_flag_clear(uint32_t flag) +{ + ERTC->sts = ~(flag | 0x00000080) | (ERTC->sts_bit.imen << 7); +} + +/** + * @brief write data to the bpr register. + * @param dt: data register + * this parameter can be one of the following values: + * - ERTC_DT1 + * - ERTC_DT2 + * - ... + * - ERTC_DT19 + * - ERTC_DT20 + * @param data: data to be write. + * @retval none. + */ +void ertc_bpr_data_write(ertc_dt_type dt, uint32_t data) +{ + __IO uint32_t reg = 0; + + reg = ERTC_BASE + 0x50 + (dt * 4); + + *(__IO uint32_t *)reg = data; +} + +/** + * @brief read data from bpr register. + * @param dt: data register + * this parameter can be one of the following values: + * - ERTC_DT1 + * - ERTC_DT2 + * - ... + * - ERTC_DT19 + * - ERTC_DT20 + * @retval data value. + */ +uint32_t ertc_bpr_data_read(ertc_dt_type dt) +{ + __IO uint32_t reg = 0; + + reg = ERTC_BASE + 0x50 + (dt * 4); + + return (*(__IO uint32_t *)reg); +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_exint.c b/armlib/at32_sys/drivers/src/at32f435_437_exint.c new file mode 100644 index 000000000..047297421 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_exint.c @@ -0,0 +1,264 @@ +/** + ************************************************************************** + * @file at32f435_437_exint.c + * @brief contains all the functions for the exint firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_exint.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup EXINT + * @brief EXINT driver modules + * @{ + */ + +#ifdef EXINT_MODULE_ENABLED + +/** @defgroup EXINT_private_functions + * @{ + */ + +/** + * @brief exint reset + * @param none + * @retval none + */ +void exint_reset(void) +{ + EXINT->inten = 0x00000000; + EXINT->polcfg1 = 0x00000000; + EXINT->polcfg2 = 0x00000000; + EXINT->evten = 0x00000000; + EXINT->intsts = 0x007FFFFF; +} + +/** + * @brief exint default para init + * @param exint_struct + * - to the structure of exint_init_type + * @retval none + */ +void exint_default_para_init(exint_init_type *exint_struct) +{ + exint_struct->line_enable = FALSE; + exint_struct->line_select = EXINT_LINE_NONE; + exint_struct->line_polarity = EXINT_TRIGGER_FALLING_EDGE; + exint_struct->line_mode = EXINT_LINE_EVENT; +} + +/** + * @brief exint init + * @param exint_struct + * - to the structure of exint_init_type + * @retval none + */ +void exint_init(exint_init_type *exint_struct) +{ + uint32_t line_index = 0; + line_index = exint_struct->line_select; + + EXINT->inten &= ~line_index; + EXINT->evten &= ~line_index; + + if(exint_struct->line_enable != FALSE) + { + if(exint_struct->line_mode == EXINT_LINE_INTERRUPT) + { + EXINT->inten |= line_index; + } + else + { + EXINT->evten |= line_index; + } + + EXINT->polcfg1 &= ~line_index; + EXINT->polcfg2 &= ~line_index; + if(exint_struct->line_polarity == EXINT_TRIGGER_RISING_EDGE) + { + EXINT->polcfg1 |= line_index; + } + else if(exint_struct->line_polarity == EXINT_TRIGGER_FALLING_EDGE) + { + EXINT->polcfg2 |= line_index; + } + else + { + EXINT->polcfg1 |= line_index; + EXINT->polcfg2 |= line_index; + } + } +} + +/** + * @brief clear exint flag + * @param exint_line + * this parameter can be any combination of the following values: + * - EXINT_LINE_0 + * - EXINT_LINE_1 + * ... + * - EXINT_LINE_21 + * - EXINT_LINE_22 + * @retval none + */ +void exint_flag_clear(uint32_t exint_line) +{ + EXINT->intsts = exint_line; +} + +/** + * @brief get exint flag + * @param exint_line + * this parameter can be one of the following values: + * - EXINT_LINE_0 + * - EXINT_LINE_1 + * ... + * - EXINT_LINE_21 + * - EXINT_LINE_22 + * @retval the new state of exint flag(SET or RESET). + */ +flag_status exint_flag_get(uint32_t exint_line) +{ + flag_status status = RESET; + uint32_t exint_flag =0; + exint_flag = EXINT->intsts & exint_line; + if((exint_flag != (uint16_t)RESET)) + { + status = SET; + } + else + { + status = RESET; + } + return status; +} + +/** + * @brief get exint interrupt flag + * @param exint_line + * this parameter can be one of the following values: + * - EXINT_LINE_0 + * - EXINT_LINE_1 + * ... + * - EXINT_LINE_21 + * - EXINT_LINE_22 + * @retval the new state of exint flag(SET or RESET). + */ +flag_status exint_interrupt_flag_get(uint32_t exint_line) +{ + flag_status status = RESET; + uint32_t exint_flag = 0; + exint_flag = EXINT->intsts & exint_line; + exint_flag = exint_flag & EXINT->inten; + + if((exint_flag != (uint16_t)RESET)) + { + status = SET; + } + else + { + status = RESET; + } + return status; +} + +/** + * @brief generate exint software interrupt event + * @param exint_line + * this parameter can be one of the following values: + * - EXINT_LINE_0 + * - EXINT_LINE_1 + * ... + * - EXINT_LINE_21 + * - EXINT_LINE_22 + * @retval none + */ +void exint_software_interrupt_event_generate(uint32_t exint_line) +{ + EXINT->swtrg |= exint_line; +} + +/** + * @brief enable or disable exint interrupt + * @param exint_line + * this parameter can be any combination of the following values: + * - EXINT_LINE_0 + * - EXINT_LINE_1 + * ... + * - EXINT_LINE_21 + * - EXINT_LINE_22 + * @param new_state: new state of exint interrupt. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void exint_interrupt_enable(uint32_t exint_line, confirm_state new_state) +{ + if(new_state == TRUE) + { + EXINT->inten |= exint_line; + } + else + { + EXINT->inten &= ~exint_line; + } +} + +/** + * @brief enable or disable exint event + * @param exint_line + * this parameter can be any combination of the following values: + * - EXINT_LINE_0 + * - EXINT_LINE_1 + * ... + * - EXINT_LINE_21 + * - EXINT_LINE_22 + * @param new_state: new state of exint event. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void exint_event_enable(uint32_t exint_line, confirm_state new_state) +{ + if(new_state == TRUE) + { + EXINT->evten |= exint_line; + } + else + { + EXINT->evten &= ~exint_line; + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_flash.c b/armlib/at32_sys/drivers/src/at32f435_437_flash.c new file mode 100644 index 000000000..3bd8770ae --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_flash.c @@ -0,0 +1,1157 @@ +/** + ************************************************************************** + * @file at32f435_437_flash.c + * @brief contains all the functions for the flash firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_flash.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup FLASH + * @brief FLASH driver modules + * @{ + */ + +#ifdef FLASH_MODULE_ENABLED + +/** @defgroup FLASH_private_functions + * @{ + */ + +/** + * @brief check whether the specified flash flag is set or not. + * @param flash_flag: specifies the flash flag to check. + * this parameter can be one of flash flag status: + * - FLASH_OBF_FLAG + * - FLASH_ODF_FLAG + * - FLASH_PRGMERR_FLAG + * - FLASH_EPPERR_FLAG + * - FLASH_BANK1_OBF_FLAG + * - FLASH_BANK1_ODF_FLAG + * - FLASH_BANK1_PRGMERR_FLAG + * - FLASH_BANK1_EPPERR_FLAG + * - FLASH_BANK2_OBF_FLAG + * - FLASH_BANK2_ODF_FLAG + * - FLASH_BANK2_PRGMERR_FLAG + * - FLASH_BANK2_EPPERR_FLAG + * - FLASH_USDERR_FLAG + * @retval the new state of flash_flag (SET or RESET). + */ +flag_status flash_flag_get(uint32_t flash_flag) +{ + flag_status status = RESET; + uint32_t flag_position; + flag_position = flash_flag & 0x70000000; + flash_flag &= 0x8FFFFFFF; + switch(flag_position) + { + case 0x00000000: + if(FLASH->sts & flash_flag) + status = SET; + break; + case 0x10000000: + if(FLASH->sts2 & flash_flag) + status = SET; + break; + case 0x40000000: + if(FLASH->usd & flash_flag) + status = SET; + break; + default: + break; + } + /* return the new state of flash_flag (SET or RESET) */ + return status; +} + +/** + * @brief clear the flash flag. + * @param flash_flag: specifies the flash flags to clear. + * this parameter can be any combination of the following values: + * - FLASH_ODF_FLAG + * - FLASH_PRGMERR_FLAG + * - FLASH_EPPERR_FLAG + * - FLASH_BANK1_ODF_FLAG + * - FLASH_BANK1_PRGMERR_FLAG + * - FLASH_BANK1_EPPERR_FLAG + * - FLASH_BANK2_ODF_FLAG + * - FLASH_BANK2_PRGMERR_FLAG + * - FLASH_BANK2_EPPERR_FLAG + * @retval none + */ +void flash_flag_clear(uint32_t flash_flag) +{ + uint32_t flag_position; + flag_position = flash_flag & 0x70000000; + flash_flag &= 0x8FFFFFFF; + switch(flag_position) + { + case 0x00000000: + FLASH->sts = flash_flag; + break; + case 0x10000000: + FLASH->sts2 = flash_flag; + break; + default: + break; + } +} + +/** + * @brief return the flash operation status. + * @param none + * @retval status: the returned value can be: FLASH_OPERATE_BUSY, + * FLASH_PROGRAM_ERROR, FLASH_EPP_ERROR or FLASH_OPERATE_DONE. + */ +flash_status_type flash_operation_status_get(void) +{ + flash_status_type flash_status = FLASH_OPERATE_DONE; + if(FLASH->sts_bit.obf != RESET) + { + flash_status = FLASH_OPERATE_BUSY; + } + else if(FLASH->sts_bit.prgmerr != RESET) + { + flash_status = FLASH_PROGRAM_ERROR; + } + else if(FLASH->sts_bit.epperr != RESET) + { + flash_status = FLASH_EPP_ERROR; + } + else + { + flash_status = FLASH_OPERATE_DONE; + } + /* return the flash status */ + return flash_status; +} + +/** + * @brief return the flash bank1 operation status. + * @param none + * @retval status: the returned value can be: FLASH_OPERATE_BUSY, + * FLASH_PROGRAM_ERROR, FLASH_EPP_ERROR or FLASH_OPERATE_DONE. + */ +flash_status_type flash_bank1_operation_status_get(void) +{ + flash_status_type flash_status = FLASH_OPERATE_DONE; + if(FLASH->sts_bit.obf != RESET) + { + flash_status = FLASH_OPERATE_BUSY; + } + else if(FLASH->sts_bit.prgmerr != RESET) + { + flash_status = FLASH_PROGRAM_ERROR; + } + else if(FLASH->sts_bit.epperr != RESET) + { + flash_status = FLASH_EPP_ERROR; + } + else + { + flash_status = FLASH_OPERATE_DONE; + } + /* return the flash status */ + return flash_status; +} + +/** + * @brief return the flash bank2 operation status. + * @param none + * @retval status: the returned value can be: FLASH_OPERATE_BUSY, + * FLASH_PROGRAM_ERROR, FLASH_EPP_ERROR or FLASH_OPERATE_DONE. + */ +flash_status_type flash_bank2_operation_status_get(void) +{ + flash_status_type flash_status = FLASH_OPERATE_DONE; + if(FLASH->sts2_bit.obf != RESET) + { + flash_status = FLASH_OPERATE_BUSY; + } + else if(FLASH->sts2_bit.prgmerr != RESET) + { + flash_status = FLASH_PROGRAM_ERROR; + } + else if(FLASH->sts2_bit.epperr != RESET) + { + flash_status = FLASH_EPP_ERROR; + } + else + { + flash_status = FLASH_OPERATE_DONE; + } + /* return the flash status */ + return flash_status; +} + +/** + * @brief wait for flash operation complete or timeout. + * @param time_out: flash operation timeout + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_operation_wait_for(uint32_t time_out) +{ + flash_status_type status = FLASH_OPERATE_DONE; + /* check for the flash status */ + status = flash_operation_status_get(); + + while((status == FLASH_OPERATE_BUSY) && (time_out != 0x00)) + { + status = flash_operation_status_get(); + time_out--; + } + if(time_out == 0x00) + { + status = FLASH_OPERATE_TIMEOUT; + } + /* return the status */ + return status; +} + +/** + * @brief wait for flash bank1 operation complete or timeout. + * @param time_out: flash operation timeout + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_bank1_operation_wait_for(uint32_t time_out) +{ + flash_status_type status = FLASH_OPERATE_DONE; + /* check for the flash status */ + status = flash_bank1_operation_status_get(); + + while((status == FLASH_OPERATE_BUSY) && (time_out != 0x00)) + { + status = flash_bank1_operation_status_get(); + time_out--; + } + if(time_out == 0x00) + { + status = FLASH_OPERATE_TIMEOUT; + } + /* return the operation status */ + return status; +} + +/** + * @brief wait for flash bank2 operation complete or timeout. + * @param time_out: flash operation timeout + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_bank2_operation_wait_for(uint32_t time_out) +{ + flash_status_type status = FLASH_OPERATE_DONE; + /* check for the flash status */ + status = flash_bank2_operation_status_get(); + + while((status == FLASH_OPERATE_BUSY) && (time_out != 0x00)) + { + status = flash_bank2_operation_status_get(); + time_out--; + } + if(time_out == 0x00) + { + status = FLASH_OPERATE_TIMEOUT; + } + /* return the operation status */ + return status; +} + +/** + * @brief unlock the flash controller. + * @param none + * @retval none + */ +void flash_unlock(void) +{ + FLASH->unlock = FLASH_UNLOCK_KEY1; + FLASH->unlock = FLASH_UNLOCK_KEY2; + FLASH->unlock2 = FLASH_UNLOCK_KEY1; + FLASH->unlock2 = FLASH_UNLOCK_KEY2; +} + +/** + * @brief unlock the flash bank1 controller. + * @param none + * @retval none + */ +void flash_bank1_unlock(void) +{ + FLASH->unlock = FLASH_UNLOCK_KEY1; + FLASH->unlock = FLASH_UNLOCK_KEY2; +} + +/** + * @brief unlock the flash bank2 controller. + * @param none + * @retval none + */ +void flash_bank2_unlock(void) +{ + FLASH->unlock2 = FLASH_UNLOCK_KEY1; + FLASH->unlock2 = FLASH_UNLOCK_KEY2; +} + +/** + * @brief lock the flash controller. + * @param none + * @retval none + */ +void flash_lock(void) +{ + FLASH->ctrl_bit.oplk = TRUE; + FLASH->ctrl2_bit.oplk = TRUE; +} + +/** + * @brief lock the flash bank1 controller. + * @param none + * @retval none + */ +void flash_bank1_lock(void) +{ + FLASH->ctrl_bit.oplk = TRUE; +} + +/** + * @brief lock the flash bank2 controller. + * @param none + * @retval none + */ +void flash_bank2_lock(void) +{ + FLASH->ctrl2_bit.oplk = TRUE; +} + +/** + * @brief erase a specified flash sector. + * @param sector_address: the sector address to be erased. + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_sector_erase(uint32_t sector_address) +{ + flash_status_type status = FLASH_OPERATE_DONE; + if((sector_address >= FLASH_BANK1_START_ADDR) && (sector_address <= FLASH_BANK1_END_ADDR)) + { + FLASH->ctrl_bit.secers = TRUE; + FLASH->addr = sector_address; + FLASH->ctrl_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_bank1_operation_wait_for(ERASE_TIMEOUT); + + /* disable the secers bit */ + FLASH->ctrl_bit.secers = FALSE; + } + else if((sector_address >= FLASH_BANK2_START_ADDR) && (sector_address <= FLASH_BANK2_END_ADDR)) + { + FLASH->ctrl2_bit.secers = TRUE; + FLASH->addr2 = sector_address; + FLASH->ctrl2_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_bank2_operation_wait_for(ERASE_TIMEOUT); + + /* disable the secers bit */ + FLASH->ctrl2_bit.secers = FALSE; + } + + /* return the erase status */ + return status; +} + +/** + * @brief erase a specified flash block. + * @param block_address: the block address to be erased. + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_block_erase(uint32_t block_address) +{ + flash_status_type status = FLASH_OPERATE_DONE; + if((block_address >= FLASH_BANK1_START_ADDR) && (block_address <= FLASH_BANK1_END_ADDR)) + { + FLASH->ctrl_bit.blkers = TRUE; + FLASH->addr = block_address; + FLASH->ctrl_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_bank1_operation_wait_for(ERASE_TIMEOUT); + + /* disable the blkers bit */ + FLASH->ctrl_bit.blkers = FALSE; + } + else if((block_address >= FLASH_BANK2_START_ADDR) && (block_address <= FLASH_BANK2_END_ADDR)) + { + FLASH->ctrl2_bit.blkers = TRUE; + FLASH->addr2 = block_address; + FLASH->ctrl2_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_bank2_operation_wait_for(ERASE_TIMEOUT); + + /* disable the blkers bit */ + FLASH->ctrl2_bit.blkers = FALSE; + } + + /* return the erase status */ + return status; +} + +/** + * @brief erase flash all internal sectors. + * @param none + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_internal_all_erase(void) +{ + flash_status_type status = FLASH_OPERATE_DONE; + + FLASH->ctrl_bit.bankers = TRUE; + FLASH->ctrl_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_bank1_operation_wait_for(ERASE_TIMEOUT); + + /* disable the bankers bit */ + FLASH->ctrl_bit.bankers = FALSE; + + if(status == FLASH_OPERATE_DONE) + { + /* if the previous operation is completed, continue to erase bank2 */ + FLASH->ctrl2_bit.bankers = TRUE; + FLASH->ctrl2_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_bank2_operation_wait_for(ERASE_TIMEOUT); + + /* disable the bankers bit */ + FLASH->ctrl2_bit.bankers = FALSE; + } + /* return the erase status */ + return status; +} + +/** + * @brief erase flash bank1 sectors. + * @param none + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_bank1_erase(void) +{ + flash_status_type status = FLASH_OPERATE_DONE; + + FLASH->ctrl_bit.bankers = TRUE; + FLASH->ctrl_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_bank1_operation_wait_for(ERASE_TIMEOUT); + + /* disable the bankers bit */ + FLASH->ctrl_bit.bankers = FALSE; + + /* return the erase status */ + return status; +} + +/** + * @brief erase flash bank2 sectors. + * @param none + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_bank2_erase(void) +{ + flash_status_type status = FLASH_OPERATE_DONE; + + FLASH->ctrl2_bit.bankers = TRUE; + FLASH->ctrl2_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_bank2_operation_wait_for(ERASE_TIMEOUT); + + /* disable the bankers bit */ + FLASH->ctrl2_bit.bankers = FALSE; + + /* return the erase status */ + return status; +} + +/** + * @brief erase the flash user system data. + * @note this functions erase all user system data except the fap byte. + * the eopb0 byte value change to 0xFF, sram size maybe change too. + * @param none + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_user_system_data_erase(void) +{ + flash_status_type status = FLASH_OPERATE_DONE; + uint16_t fap_val = FAP_RELIEVE_KEY; + /* get the flash access protection status */ + if(flash_fap_status_get() != RESET) + { + fap_val = 0x0000; + } + + /* unlock the user system data */ + FLASH->usd_unlock = FLASH_UNLOCK_KEY1; + FLASH->usd_unlock = FLASH_UNLOCK_KEY2; + while(FLASH->ctrl_bit.usdulks==RESET); + + /* erase the user system data */ + FLASH->ctrl_bit.usders = TRUE; + FLASH->ctrl_bit.erstr = TRUE; + + /* wait for operation to be completed */ + status = flash_operation_wait_for(ERASE_TIMEOUT); + + /* disable the usders bit */ + FLASH->ctrl_bit.usders = FALSE; + + if((status == FLASH_OPERATE_DONE) && (fap_val == FAP_RELIEVE_KEY)) + { + /* enable the user system data programming operation */ + FLASH->ctrl_bit.usdprgm = TRUE; + + /* restore the last flash access protection value */ + USD->fap = (uint16_t)fap_val; + + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + + /*disable the usdprgm bit */ + FLASH->ctrl_bit.usdprgm = FALSE; + } + + /* return the status */ + return status; +} + +/** + * @brief config the extend sram byte eopb0 in user system data. + * @note the 256kb and below capacity mcu only support FLASH_EOPB0_SRAM_384K, + * FLASH_EOPB0_SRAM_448K or FLASH_EOPB0_SRAM_512K. + * @param data: the eopb0 value. + * this parameter can be one of the following values: + * - FLASH_EOPB0_SRAM_512K + * - FLASH_EOPB0_SRAM_448K + * - FLASH_EOPB0_SRAM_384K + * - FLASH_EOPB0_SRAM_320K + * - FLASH_EOPB0_SRAM_256K + * - FLASH_EOPB0_SRAM_192K + * - FLASH_EOPB0_SRAM_128K + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_eopb0_config(flash_usd_eopb0_type data) +{ + flash_status_type status = FLASH_OPERATE_DONE; + + /* unlock the user system data */ + FLASH->usd_unlock = FLASH_UNLOCK_KEY1; + FLASH->usd_unlock = FLASH_UNLOCK_KEY2; + while(FLASH->ctrl_bit.usdulks==RESET); + + /* enable the user system data programming operation */ + FLASH->ctrl_bit.usdprgm = TRUE; + + /* restore the default eopb0 value */ + USD->eopb0 = (uint16_t)data; + + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + + /*disable the usdprgm bit */ + FLASH->ctrl_bit.usdprgm = FALSE; + + /* return the status */ + return status; +} + +/** + * @brief program a word at a specified address. + * @param address: specifies the address to be programmed, word alignment is recommended. + * @param data: specifies the data to be programmed. + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_word_program(uint32_t address, uint32_t data) +{ + flash_status_type status = FLASH_OPERATE_DONE; + if((address >= FLASH_BANK1_START_ADDR) && (address <= FLASH_BANK1_END_ADDR)) + { + FLASH->ctrl_bit.fprgm = TRUE; + *(__IO uint32_t*)address = data; + /* wait for operation to be completed */ + status = flash_bank1_operation_wait_for(PROGRAMMING_TIMEOUT); + + /* disable the fprgm bit */ + FLASH->ctrl_bit.fprgm = FALSE; + } + else if((address >= FLASH_BANK2_START_ADDR) && (address <= FLASH_BANK2_END_ADDR)) + { + FLASH->ctrl2_bit.fprgm = TRUE; + *(__IO uint32_t*)address = data; + /* wait for operation to be completed */ + status = flash_bank2_operation_wait_for(PROGRAMMING_TIMEOUT); + + /* disable the fprgm bit */ + FLASH->ctrl2_bit.fprgm = FALSE; + } + + /* return the program status */ + return status; +} + +/** + * @brief program a halfword at a specified address. + * @param address: specifies the address to be programmed, halfword alignment is recommended. + * @param data: specifies the data to be programmed. + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_halfword_program(uint32_t address, uint16_t data) +{ + flash_status_type status = FLASH_OPERATE_DONE; + if((address >= FLASH_BANK1_START_ADDR) && (address <= FLASH_BANK1_END_ADDR)) + { + FLASH->ctrl_bit.fprgm = TRUE; + *(__IO uint16_t*)address = data; + /* wait for operation to be completed */ + status = flash_bank1_operation_wait_for(PROGRAMMING_TIMEOUT); + + /* disable the fprgm bit */ + FLASH->ctrl_bit.fprgm = FALSE; + } + else if((address >= FLASH_BANK2_START_ADDR) && (address <= FLASH_BANK2_END_ADDR)) + { + FLASH->ctrl2_bit.fprgm = TRUE; + *(__IO uint16_t*)address = data; + /* wait for operation to be completed */ + status = flash_bank2_operation_wait_for(PROGRAMMING_TIMEOUT); + + /* disable the fprgm bit */ + FLASH->ctrl2_bit.fprgm = FALSE; + } + + /* return the program status */ + return status; +} + +/** + * @brief program a byte at a specified address. + * @note this function cannot be used to program spim. + * @param address: specifies the address to be programmed. + * @param data: specifies the data to be programmed. + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_byte_program(uint32_t address, uint8_t data) +{ + flash_status_type status = FLASH_OPERATE_DONE; + if((address >= FLASH_BANK1_START_ADDR) && (address <= FLASH_BANK1_END_ADDR)) + { + FLASH->ctrl_bit.fprgm = TRUE; + *(__IO uint8_t*)address = data; + /* wait for operation to be completed */ + status = flash_bank1_operation_wait_for(PROGRAMMING_TIMEOUT); + + /* disable the fprgm bit */ + FLASH->ctrl_bit.fprgm = FALSE; + } + else if((address >= FLASH_BANK2_START_ADDR) && (address <= FLASH_BANK2_END_ADDR)) + { + FLASH->ctrl2_bit.fprgm = TRUE; + *(__IO uint8_t*)address = data; + /* wait for operation to be completed */ + status = flash_bank2_operation_wait_for(PROGRAMMING_TIMEOUT); + + /* disable the fprgm bit */ + FLASH->ctrl2_bit.fprgm = FALSE; + } + /* return the program status */ + return status; +} + +/** + * @brief program a halfword at a specified user system data address. + * @param address: specifies the address to be programmed. + * @param data: specifies the data to be programmed. + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_user_system_data_program(uint32_t address, uint8_t data) +{ + flash_status_type status = FLASH_OPERATE_DONE; + + if(address == USD_BASE) + { + if(data != 0xA5) + return FLASH_OPERATE_DONE; + } + + /* unlock the user system data */ + FLASH->usd_unlock = FLASH_UNLOCK_KEY1; + FLASH->usd_unlock = FLASH_UNLOCK_KEY2; + while(FLASH->ctrl_bit.usdulks==RESET); + + /* enable the user system data programming operation */ + FLASH->ctrl_bit.usdprgm = TRUE; + *(__IO uint16_t*)address = data; + + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + + /* disable the usdprgm bit */ + FLASH->ctrl_bit.usdprgm = FALSE; + + /* return the user system data program status */ + return status; +} + +/** + * @brief config erase/program protection for the desired sectors. + * @param sector_bits(1:ENABLE, 0:DISABLE) + * the pointer of the address of the sectors to be erase/program protected. + * general bit 0~31 every bit is used to protect the 4KB bytes, bit 62~32 + * every bit is used to protect the 128KB bytes + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_epp_set(uint32_t *sector_bits) +{ + uint16_t epp_data[4] = {0xFFFF,0xFFFF,0xFFFF,0xFFFF}; + flash_status_type status = FLASH_OPERATE_DONE; + sector_bits[0] = (uint32_t)(~sector_bits[0]); + epp_data[0] = (uint16_t)((sector_bits[0] >> 0) & 0xFF); + epp_data[1] = (uint16_t)((sector_bits[0] >> 8) & 0xFF); + epp_data[2] = (uint16_t)((sector_bits[0] >> 16) & 0xFF); + epp_data[3] = (uint16_t)((sector_bits[0] >> 24) & 0xFF); + + /* unlock the user system data */ + FLASH->usd_unlock = FLASH_UNLOCK_KEY1; + FLASH->usd_unlock = FLASH_UNLOCK_KEY2; + while(FLASH->ctrl_bit.usdulks==RESET); + + FLASH->ctrl_bit.usdprgm = TRUE; + USD->epp0 = epp_data[0]; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + + if(status == FLASH_OPERATE_DONE) + { + USD->epp1 = epp_data[1]; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + } + if(status == FLASH_OPERATE_DONE) + { + USD->epp2 = epp_data[2]; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + } + if(status == FLASH_OPERATE_DONE) + { + USD->epp3 = epp_data[3]; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + } + + sector_bits[1] = (uint32_t)(~sector_bits[1]); + epp_data[0] = (uint16_t)((sector_bits[1] >> 0) & 0xFF); + epp_data[1] = (uint16_t)((sector_bits[1] >> 8) & 0xFF); + epp_data[2] = (uint16_t)((sector_bits[1] >> 16) & 0xFF); + epp_data[3] = (uint16_t)((sector_bits[1] >> 24) & 0xFF); + if(status == FLASH_OPERATE_DONE) + { + USD->epp4 = epp_data[0]; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + } + if(status == FLASH_OPERATE_DONE) + { + USD->epp5 = epp_data[1]; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + } + if(status == FLASH_OPERATE_DONE) + { + USD->epp6 = epp_data[2]; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + } + if(status == FLASH_OPERATE_DONE) + { + USD->epp7 = epp_data[3]; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + } + + /* disable the usdprgm bit */ + FLASH->ctrl_bit.usdprgm = FALSE; + + /* return the erase/program protection operation status */ + return status; +} + +/** + * @brief return the flash erase/program protection status. + * @param sector_bits: pointer to get the epps register. + * @retval none + */ +void flash_epp_status_get(uint32_t *sector_bits) +{ + /* return the flash erase/program protection register value */ + sector_bits[0] = (uint32_t)(FLASH->epps0); + sector_bits[1] = (uint32_t)(FLASH->epps1); +} + +/** + * @brief enable or disable the flash access protection. + * @note if the user has already programmed the other user system data before calling + * this function, must re-program them since this function erase all user system data. + * @param new_state: new state of the flash access protection. + * this parameter can be: TRUE or FALSE. + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_fap_enable(confirm_state new_state) +{ + flash_status_type status = FLASH_OPERATE_DONE; + + /* unlock the user system data */ + FLASH->usd_unlock = FLASH_UNLOCK_KEY1; + FLASH->usd_unlock = FLASH_UNLOCK_KEY2; + while(FLASH->ctrl_bit.usdulks==RESET); + + FLASH->ctrl_bit.usders = TRUE; + FLASH->ctrl_bit.erstr = TRUE; + /* wait for operation to be completed */ + status = flash_operation_wait_for(ERASE_TIMEOUT); + + /* disable the usders bit */ + FLASH->ctrl_bit.usders = FALSE; + + if(status == FLASH_OPERATE_DONE) + { + /* enable the user system data programming operation */ + FLASH->ctrl_bit.usdprgm = TRUE; + + /* restore the default eopb0 value */ + USD->eopb0 = (uint16_t)0x0002; + + /* Wait for operation to be completed */ + status = flash_operation_wait_for(ERASE_TIMEOUT); + + if(new_state == FALSE) + { + USD->fap = FAP_RELIEVE_KEY; + /* Wait for operation to be completed */ + status = flash_operation_wait_for(ERASE_TIMEOUT); + } + /* disable the usdprgm bit */ + FLASH->ctrl_bit.usdprgm = FALSE; + } + + /* return the flash access protection operation status */ + return status; +} + +/** + * @brief check the flash access protection status. + * @param none + * @retval flash access protection status(SET or RESET) + */ +flag_status flash_fap_status_get(void) +{ + return (flag_status)FLASH->usd_bit.fap; +} + +/** + * @brief program the flash system setting byte in usd: wdt_ato_en / depslp_rst / stdby_rst / btopt. + * @param usd_ssb: the system setting byte + * @note this parameter usd_ssb must contain a combination of all the following 6 types of data + * type 1: wdt_ato_en, select the wdt auto start + * this data can be one of the following values: + * - USD_WDT_ATO_DISABLE: disable wdt auto start + * - USD_WDT_ATO_ENABLE: enable wdt auto start + * type 2: depslp_rst, reset event when entering deepsleep mode. + * this data can be one of the following values: + * - USD_DEPSLP_NO_RST: no reset generated when entering in deepsleep + * - USD_DEPSLP_RST: reset generated when entering in deepsleep + * type 3: stdby_rst, reset event when entering standby mode. + * this data can be one of the following values: + * - USD_STDBY_NO_RST: no reset generated when entering in standby + * - USD_STDBY_RST: reset generated when entering in standby + * type 4: btopt, at startup,if boot pins are set in boot from user flash position,selected the device boot from bank1/bank2. + * this data can be one of the following values: + * - FLASH_BOOT_FROM_BANK1:boot from bank1 + * - FLASH_BOOT_FROM_BANK2:boot from bank 2 or bank 1 + * type 5: wdt_depslp, wdt stop/continue count when entering in deepsleep. + * this data can be one of the following values: + * - USD_WDT_DEPSLP_CONTINUE: wdt continue count + * - USD_WDT_DEPSLP_STOP: wdt stop count + * type 6: wdt_stdby, wdt stop/continue count when entering in standby. + * this data can be one of the following values: + * - USD_WDT_STDBY_CONTINUE: wdt continue count + * - USD_WDT_STDBY_STOP: wdt stop count + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_ssb_set(uint8_t usd_ssb) +{ + flash_status_type status = FLASH_OPERATE_DONE; + + /* unlock the user system data */ + FLASH->usd_unlock = FLASH_UNLOCK_KEY1; + FLASH->usd_unlock = FLASH_UNLOCK_KEY2; + while(FLASH->ctrl_bit.usdulks==RESET); + + /* enable the user system data programming operation */ + FLASH->ctrl_bit.usdprgm = TRUE; + + USD->ssb = usd_ssb; + /* wait for operation to be completed */ + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + + /* disable the usdprgm bit */ + FLASH->ctrl_bit.usdprgm = FALSE; + + /* return the user system data program status */ + return status; +} + +/** + * @brief return the flash system setting byte status. + * @param none + * @retval values from flash_usd register: wdt_ato_en(bit0), depslp_rst(bit1), + * stdby_rst(bit2) and btopt(bit3). + */ +uint8_t flash_ssb_status_get(void) +{ + /* return the system setting byte status */ + return (uint8_t)(FLASH->usd >> 2); +} + +/** + * @brief enable or disable the specified flash interrupts. + * @param flash_int: specifies the flash interrupt sources to be enabled or disabled. + * this parameter can be any combination of the following values: + * - FLASH_ERR_INT + * - FLASH_ODF_INT + * - FLASH_BANK1_ERR_INT + * - FLASH_BANK1_ODF_INT + * - FLASH_BANK2_ERR_INT + * - FLASH_BANK2_ODF_INT + * @param new_state: new state of the specified flash interrupts. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void flash_interrupt_enable(uint32_t flash_int, confirm_state new_state) +{ + if(flash_int & FLASH_BANK1_ERR_INT) + FLASH->ctrl_bit.errie = new_state; + if(flash_int & FLASH_BANK1_ODF_INT) + FLASH->ctrl_bit.odfie = new_state; + if(flash_int & FLASH_BANK2_ERR_INT) + FLASH->ctrl2_bit.errie = new_state; + if(flash_int & FLASH_BANK2_ODF_INT) + FLASH->ctrl2_bit.odfie = new_state; +} + +/** + * @brief enable security library function. + * @param pwd: slib password + * start_sector: security library start sector + * inst_start_sector: security library i-bus area start sector + * end_sector: security library end sector + * @retval status: the returned value can be: FLASH_PROGRAM_ERROR, + * FLASH_EPP_ERROR, FLASH_OPERATE_DONE or FLASH_OPERATE_TIMEOUT. + */ +flash_status_type flash_slib_enable(uint32_t pwd, uint16_t start_sector, uint16_t inst_start_sector, uint16_t end_sector) +{ + uint32_t slib_range; + flash_status_type status = FLASH_OPERATE_DONE; + + /*check range param limits*/ + if((start_sector > inst_start_sector) || ((inst_start_sector > end_sector) && \ + (inst_start_sector != 0xFFFF)) || (start_sector > end_sector)) + return FLASH_PROGRAM_ERROR; + + /* unlock slib cfg register */ + FLASH->slib_unlock = SLIB_UNLOCK_KEY; + while(FLASH->slib_misc_sts_bit.slib_ulkf==RESET); + + /* configure slib, set pwd and range */ + FLASH->slib_set_pwd = pwd; + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + if(status == FLASH_OPERATE_DONE) + { + slib_range = ((uint32_t)(end_sector << 16) & FLASH_SLIB_END_SECTOR) | (start_sector & FLASH_SLIB_START_SECTOR); + FLASH->slib_set_range0 = slib_range; + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + if(status == FLASH_OPERATE_DONE) + { + slib_range = (inst_start_sector & FLASH_SLIB_INST_START_SECTOR) | 0x80000000; + FLASH->slib_set_range1 = slib_range; + status = flash_operation_wait_for(PROGRAMMING_TIMEOUT); + } + } + + return status; +} + +/** + * @brief disable slib when slib enabled. + * @param pwd: slib password + * @retval success or error + */ +error_status flash_slib_disable(uint32_t pwd) +{ + flash_status_type status = FLASH_OPERATE_DONE; + /* write password to disable slib */ + FLASH->slib_pwd_clr = pwd; + + status = flash_operation_wait_for(ERASE_TIMEOUT); + if(status == FLASH_OPERATE_DONE) + { + if(FLASH->slib_misc_sts_bit.slib_pwd_ok) + return SUCCESS; + else + return ERROR; + } + return ERROR; +} + +/** + * @brief get remaining count of slib(range: 256~0). + * @param none + * @retval uint32_t + */ +uint32_t flash_slib_remaining_count_get(void) +{ + return (uint32_t)FLASH->slib_misc_sts_bit.slib_rcnt; +} + +/** + * @brief get the slib state. + * @param none + * @retval SET or RESET + */ +flag_status flash_slib_state_get(void) +{ + if(FLASH->slib_sts0_bit.slib_enf) + return SET; + else + return RESET; +} + +/** + * @brief get the start sector of slib. + * @param none + * @retval uint16_t + */ +uint16_t flash_slib_start_sector_get(void) +{ + return (uint16_t)FLASH->slib_sts1_bit.slib_ss; +} + +/** + * @brief get the instruction start sector of slib. + * @param none + * @retval uint16_t + */ +uint16_t flash_slib_inststart_sector_get(void) +{ + return (uint16_t)FLASH->slib_sts2_bit.slib_inst_ss; +} + +/** + * @brief get the end sector of slib. + * @param none + * @retval uint16_t + */ +uint16_t flash_slib_end_sector_get(void) +{ + return (uint16_t)FLASH->slib_sts1_bit.slib_es; +} + +/** + * @brief flash crc calibration in main block. + * @param start_sector: crc calibration start sector number + * sector_cnt: crc calibration sector count + * @retval uint32: crc calibration result + */ +uint32_t flash_crc_calibrate(uint32_t start_sector, uint32_t sector_cnt) +{ + FLASH->crc_ctrl_bit.crc_ss = start_sector; + FLASH->crc_ctrl_bit.crc_sn = sector_cnt; + FLASH->crc_ctrl_bit.crc_strt = TRUE; + flash_operation_wait_for(OPERATION_TIMEOUT); + return FLASH->crc_chkr; +} + +/** + * @brief flash non-zero wait area boost enable. + * @param new_state: new state of the flash non-zero wait area boost operation. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void flash_nzw_boost_enable(confirm_state new_state) +{ + FLASH->psr_bit.nzw_bst = new_state; +} + +/** + * @brief flash continue read enable. + * @param new_state: new state of the flash continue read enable operation. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void flash_continue_read_enable(confirm_state new_state) +{ + FLASH->contr_bit.fcontr_en = new_state; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_gpio.c b/armlib/at32_sys/drivers/src/at32f435_437_gpio.c new file mode 100644 index 000000000..1c88b8798 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_gpio.c @@ -0,0 +1,523 @@ +/** + ************************************************************************** + * @file at32f435_437_gpio.c + * @brief contains all the functions for the gpio firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_gpio.h" +#include "at32f435_437_crm.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup GPIO + * @brief GPIO driver modules + * @{ + */ + +#ifdef GPIO_MODULE_ENABLED + +/** @defgroup GPIO_private_functions + * @{ + */ + +/** + * @brief reset the gpio register + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @retval none + */ +void gpio_reset(gpio_type *gpio_x) +{ + if(gpio_x == GPIOA) + { + crm_periph_reset(CRM_GPIOA_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_GPIOA_PERIPH_RESET, FALSE); + } + else if(gpio_x == GPIOB) + { + crm_periph_reset(CRM_GPIOB_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_GPIOB_PERIPH_RESET, FALSE); + } + else if(gpio_x == GPIOC) + { + crm_periph_reset(CRM_GPIOC_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_GPIOC_PERIPH_RESET, FALSE); + } + else if(gpio_x == GPIOD) + { + crm_periph_reset(CRM_GPIOD_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_GPIOD_PERIPH_RESET, FALSE); + } + else if(gpio_x == GPIOE) + { + crm_periph_reset(CRM_GPIOE_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_GPIOE_PERIPH_RESET, FALSE); + } + else if(gpio_x == GPIOF) + { + crm_periph_reset(CRM_GPIOF_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_GPIOF_PERIPH_RESET, FALSE); + } + else if(gpio_x == GPIOG) + { + crm_periph_reset(CRM_GPIOG_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_GPIOG_PERIPH_RESET, FALSE); + } + else if(gpio_x == GPIOH) + { + crm_periph_reset(CRM_GPIOH_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_GPIOH_PERIPH_RESET, FALSE); + } +} + +/** + * @brief initialize the gpio peripheral. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param gpio_init_struct: pointer to gpio init structure. + * @retval none + */ +void gpio_init(gpio_type *gpio_x, gpio_init_type *gpio_init_struct) +{ + uint16_t pinx_value, pin_index = 0; + + pinx_value = (uint16_t)gpio_init_struct->gpio_pins; + + while(pinx_value > 0) + { + if(pinx_value & 0x01) + { + gpio_x->cfgr &= (uint32_t)~(0x03 << (pin_index * 2)); + gpio_x->cfgr |= (uint32_t)(gpio_init_struct->gpio_mode << (pin_index * 2)); + + gpio_x->omode &= (uint32_t)~(0x01 << (pin_index)); + gpio_x->omode |= (uint32_t)(gpio_init_struct->gpio_out_type << (pin_index)); + + gpio_x->odrvr &= (uint32_t)~(0x03 << (pin_index * 2)); + gpio_x->odrvr |= (uint32_t)(gpio_init_struct->gpio_drive_strength << (pin_index * 2)); + + gpio_x->pull &= (uint32_t)~(0x03 << (pin_index * 2)); + gpio_x->pull |= (uint32_t)(gpio_init_struct->gpio_pull << (pin_index * 2)); + } + pinx_value >>= 1; + pin_index++; + } +} + +/** + * @brief fill each gpio_init_type member with its default value. + * @param gpio_init_struct : pointer to a gpio_init_type structure which will be initialized. + * @retval none + */ +void gpio_default_para_init(gpio_init_type *gpio_init_struct) +{ + /* reset gpio init structure parameters values */ + gpio_init_struct->gpio_pins = GPIO_PINS_ALL; + gpio_init_struct->gpio_mode = GPIO_MODE_INPUT; + gpio_init_struct->gpio_out_type = GPIO_OUTPUT_PUSH_PULL; + gpio_init_struct->gpio_pull = GPIO_PULL_NONE; + gpio_init_struct->gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER; +} + +/** + * @brief read the specified input port pin. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param pins: gpio pin number + * this parameter can be one of the following values: + * - GPIO_PINS_0 + * - GPIO_PINS_1 + * - GPIO_PINS_2 + * - GPIO_PINS_3 + * - GPIO_PINS_4 + * - GPIO_PINS_5 + * - GPIO_PINS_6 + * - GPIO_PINS_7 + * - GPIO_PINS_8 + * - GPIO_PINS_9 + * - GPIO_PINS_10 + * - GPIO_PINS_11 + * - GPIO_PINS_12 + * - GPIO_PINS_13 + * - GPIO_PINS_14 + * - GPIO_PINS_15 + * @retval flag_status (SET or RESET) + */ +flag_status gpio_input_data_bit_read(gpio_type *gpio_x, uint16_t pins) +{ + flag_status status = RESET; + + if(pins != (pins & gpio_x->idt)) + { + status = RESET; + } + else + { + status = SET; + } + + return status; +} + +/** + * @brief read the specified gpio input data port. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @retval gpio input data port value. + */ +uint16_t gpio_input_data_read(gpio_type *gpio_x) +{ + return ((uint16_t)(gpio_x->idt)); +} + +/** + * @brief read the specified output port pin. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param pins: gpio pin number + * this parameter can be one of the following values: + * - GPIO_PINS_0 + * - GPIO_PINS_1 + * - GPIO_PINS_2 + * - GPIO_PINS_3 + * - GPIO_PINS_4 + * - GPIO_PINS_5 + * - GPIO_PINS_6 + * - GPIO_PINS_7 + * - GPIO_PINS_8 + * - GPIO_PINS_9 + * - GPIO_PINS_10 + * - GPIO_PINS_11 + * - GPIO_PINS_12 + * - GPIO_PINS_13 + * - GPIO_PINS_14 + * - GPIO_PINS_15 + * @retval flag_status (SET or RESET) + */ +flag_status gpio_output_data_bit_read(gpio_type *gpio_x, uint16_t pins) +{ + flag_status status = RESET; + + if((gpio_x->odt & pins) != RESET) + { + status = SET; + } + else + { + status = RESET; + } + + return status; +} + +/** + * @brief read the specified gpio ouput data port. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @retval gpio input data port value. + */ +uint16_t gpio_output_data_read(gpio_type *gpio_x) +{ + return ((uint16_t)(gpio_x->odt)); +} + +/** + * @brief set the selected data port bits. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param pins: gpio pin number + * parameter can be any combination of gpio_pin_x, gpio_pin_x as following values: + * - GPIO_PINS_0 + * - GPIO_PINS_1 + * - GPIO_PINS_2 + * - GPIO_PINS_3 + * - GPIO_PINS_4 + * - GPIO_PINS_5 + * - GPIO_PINS_6 + * - GPIO_PINS_7 + * - GPIO_PINS_8 + * - GPIO_PINS_9 + * - GPIO_PINS_10 + * - GPIO_PINS_11 + * - GPIO_PINS_12 + * - GPIO_PINS_13 + * - GPIO_PINS_14 + * - GPIO_PINS_15 + * - GPIO_PINS_ALL + * @retval none + */ +void gpio_bits_set(gpio_type *gpio_x, uint16_t pins) +{ + gpio_x->scr = pins; +} + +/** + * @brief clear the selected data port bits. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param pins: gpio pin number + * parameter can be any combination of gpio_pin_x, gpio_pin_x as following values: + * - GPIO_PINS_0 + * - GPIO_PINS_1 + * - GPIO_PINS_2 + * - GPIO_PINS_3 + * - GPIO_PINS_4 + * - GPIO_PINS_5 + * - GPIO_PINS_6 + * - GPIO_PINS_7 + * - GPIO_PINS_8 + * - GPIO_PINS_9 + * - GPIO_PINS_10 + * - GPIO_PINS_11 + * - GPIO_PINS_12 + * - GPIO_PINS_13 + * - GPIO_PINS_14 + * - GPIO_PINS_15 + * - GPIO_PINS_ALL + * @retval none + */ +void gpio_bits_reset(gpio_type *gpio_x, uint16_t pins) +{ + gpio_x->clr = pins; +} + +/** + * @brief set or clear the selected data port bit. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param pins: gpio pin number + * parameter can be any combination of gpio_pin_x, gpio_pin_x as following values: + * - GPIO_PINS_0 + * - GPIO_PINS_1 + * - GPIO_PINS_2 + * - GPIO_PINS_3 + * - GPIO_PINS_4 + * - GPIO_PINS_5 + * - GPIO_PINS_6 + * - GPIO_PINS_7 + * - GPIO_PINS_8 + * - GPIO_PINS_9 + * - GPIO_PINS_10 + * - GPIO_PINS_11 + * - GPIO_PINS_12 + * - GPIO_PINS_13 + * - GPIO_PINS_14 + * - GPIO_PINS_15 + * - GPIO_PINS_ALL + * @param bit_state: specifies the value to be written to the selected bit (TRUE or FALSE). + * @retval none + */ +void gpio_bits_write(gpio_type *gpio_x, uint16_t pins, confirm_state bit_state) +{ + if(bit_state != FALSE) + { + gpio_x->scr = pins; + } + else + { + gpio_x->clr = pins; + } +} + +/** + * @brief write data to the specified gpio data port. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param port_value: specifies the value to be written to the port output data register. + * @retval none + */ +void gpio_port_write(gpio_type *gpio_x, uint16_t port_value) +{ + gpio_x->odt = port_value; +} + +/** + * @brief write protect gpio pins configuration registers. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param pins: gpio pin number + * this parameter can be any combination of the following: + * - GPIO_PINS_0 + * - GPIO_PINS_1 + * - GPIO_PINS_2 + * - GPIO_PINS_3 + * - GPIO_PINS_4 + * - GPIO_PINS_5 + * - GPIO_PINS_6 + * - GPIO_PINS_7 + * - GPIO_PINS_8 + * - GPIO_PINS_9 + * - GPIO_PINS_10 + * - GPIO_PINS_11 + * - GPIO_PINS_12 + * - GPIO_PINS_13 + * - GPIO_PINS_14 + * - GPIO_PINS_15 + * - GPIO_PINS_ALL + * @retval none + */ +void gpio_pin_wp_config(gpio_type *gpio_x, uint16_t pins) +{ + uint32_t temp = 0x00010000; + + temp |= pins; + /* set wpen bit */ + gpio_x->wpr = temp; + /* reset wpen bit */ + gpio_x->wpr = pins; + /* set wpen bit */ + gpio_x->wpr = temp; + /* read wpen bit*/ + temp = gpio_x->wpr; + /* read wpen bit*/ + temp = gpio_x->wpr; +} + +/** + * @brief enable or disable gpio pins huge driven. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param pins: gpio pin number + * parameter can be any combination of gpio_pin_x, gpio_pin_x as following values: + * - GPIO_PINS_0 + * - GPIO_PINS_1 + * - GPIO_PINS_2 + * - GPIO_PINS_3 + * - GPIO_PINS_4 + * - GPIO_PINS_5 + * - GPIO_PINS_6 + * - GPIO_PINS_7 + * - GPIO_PINS_8 + * - GPIO_PINS_9 + * - GPIO_PINS_10 + * - GPIO_PINS_11 + * - GPIO_PINS_12 + * - GPIO_PINS_13 + * - GPIO_PINS_14 + * - GPIO_PINS_15 + * - GPIO_PINS_ALL + * @param new_state: new state of the slew rate. + * this parameter can be: true or false. + * @retval none + */ +void gpio_pins_huge_driven_config(gpio_type *gpio_x, uint16_t pins, confirm_state new_state) +{ + if(new_state != FALSE) + { + gpio_x->hdrv |= pins; + } + else + { + gpio_x->hdrv &= ~pins; + } +} + +/** + * @brief configure the pin's muxing function. + * @param gpio_x: to select the gpio peripheral. + * this parameter can be one of the following values: + * GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH. + * @param gpio_pin_source: specifies the pin for the muxing function. + * this parameter can be one of the following values: + * - GPIO_PINS_SOURCE0 + * - GPIO_PINS_SOURCE1 + * - GPIO_PINS_SOURCE2 + * - GPIO_PINS_SOURCE3 + * - GPIO_PINS_SOURCE4 + * - GPIO_PINS_SOURCE5 + * - GPIO_PINS_SOURCE6 + * - GPIO_PINS_SOURCE7 + * - GPIO_PINS_SOURCE8 + * - GPIO_PINS_SOURCE9 + * - GPIO_PINS_SOURCE10 + * - GPIO_PINS_SOURCE11 + * - GPIO_PINS_SOURCE12 + * - GPIO_PINS_SOURCE13 + * - GPIO_PINS_SOURCE14 + * - GPIO_PINS_SOURCE15 + * @param gpio_mux: select the pin to used as muxing function. + * this parameter can be one of the following values: + * - GPIO_MUX_0 + * - GPIO_MUX_1 + * - GPIO_MUX_2 + * - GPIO_MUX_3 + * - GPIO_MUX_4 + * - GPIO_MUX_5 + * - GPIO_MUX_6 + * - GPIO_MUX_7 + * - GPIO_MUX_8 + * - GPIO_MUX_9 + * - GPIO_MUX_10 + * - GPIO_MUX_11 + * - GPIO_MUX_12 + * - GPIO_MUX_13 + * - GPIO_MUX_14 + * - GPIO_MUX_15 + * @retval none + */ +void gpio_pin_mux_config(gpio_type *gpio_x, gpio_pins_source_type gpio_pin_source, gpio_mux_sel_type gpio_mux) +{ + uint32_t temp = 0x00; + uint32_t temp_2 = 0x00; + + temp = ((uint32_t)(gpio_mux) << ((uint32_t)((uint32_t)gpio_pin_source & (uint32_t)0x07) * 4)); + if(gpio_pin_source >> 0x03) + { + gpio_x->muxh &= ~((uint32_t)0xF << ((uint32_t)((uint32_t)gpio_pin_source & (uint32_t)0x07) * 4)); + temp_2 = gpio_x->muxh | temp; + gpio_x->muxh = temp_2; + } + else + { + gpio_x->muxl &= ~((uint32_t)0xF << ((uint32_t)((uint32_t)gpio_pin_source & (uint32_t)0x07) * 4)); + temp_2 = gpio_x->muxl | temp; + gpio_x->muxl = temp_2; + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_i2c.c b/armlib/at32_sys/drivers/src/at32f435_437_i2c.c new file mode 100644 index 000000000..434494a38 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_i2c.c @@ -0,0 +1,819 @@ +/** + ************************************************************************** + * @file at32f435_437_i2c.c + * @brief contains all the functions for the i2c firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_i2c.h" +#include "at32f435_437_crm.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup I2C + * @brief I2C driver modules + * @{ + */ + +#ifdef I2C_MODULE_ENABLED + +/** @defgroup I2C_private_functions + * @{ + */ + +/** + * @brief reset the i2c register + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @retval none + */ +void i2c_reset(i2c_type *i2c_x) +{ + if(i2c_x == I2C1) + { + crm_periph_reset(CRM_I2C1_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_I2C1_PERIPH_RESET, FALSE); + } + else if(i2c_x == I2C2) + { + crm_periph_reset(CRM_I2C2_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_I2C2_PERIPH_RESET, FALSE); + } + else if(i2c_x == I2C3) + { + crm_periph_reset(CRM_I2C3_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_I2C3_PERIPH_RESET, FALSE); + } +} + +/** + * @brief init i2c digit filters and clock control register. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param dfilters: number of digit filters (0x00~0x0F). + * @param clk: i2c clock control register (0x00000000~0xFFFFFFFF). + * @retval none + */ +void i2c_init(i2c_type *i2c_x, uint8_t dfilters, uint32_t clk) +{ + /* disable i2c peripheral */ + i2c_x->ctrl1_bit.i2cen = FALSE; + + /* write clkctrl register*/ + i2c_x->clkctrl = clk; + + /* write digital filter register*/ + i2c_x->ctrl1_bit.dflt = dfilters; +} + +/** + * @brief config i2c own address 1. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param mode: i2c address mode. + * this parameter can be one of the following values: + * - I2C_ADDRESS_MODE_7BIT: 7bit address. + * - I2C_ADDRESS_MODE_10BIT: 10bit address. + * @param address: own address 1, such as 0xB0. + * @retval none + */ +void i2c_own_address1_set(i2c_type *i2c_x, i2c_address_mode_type mode, uint16_t address) +{ + /* config address mode */ + i2c_x->oaddr1_bit.addr1mode = mode; + + /* config address */ + i2c_x->oaddr1_bit.addr1 = address & 0x03FF; + + /* enable address */ + i2c_x->oaddr1_bit.addr1en = TRUE; +} + +/** + * @brief config i2c own address 2 and mask. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param address: own address 1, such as 0xC0. + * @param mask: own address 2 mask. + * this parameter can be one of the following values: + * - I2C_ADDR2_NOMASK: compare bit [7:1]. + * - I2C_ADDR2_MASK01: only compare bit [7:2]. + * - I2C_ADDR2_MASK02: only compare bit [7:3]. + * - I2C_ADDR2_MASK03: only compare bit [7:4]. + * - I2C_ADDR2_MASK04: only compare bit [7:5]. + * - I2C_ADDR2_MASK05: only compare bit [7:6]. + * - I2C_ADDR2_MASK06: only compare bit [7]. + * - I2C_ADDR2_MASK07: response all addresses other than those reserved for i2c. + * @retval none + */ +void i2c_own_address2_set(i2c_type *i2c_x, uint8_t address, i2c_addr2_mask_type mask) +{ + i2c_x->oaddr2_bit.addr2mask = mask; + + i2c_x->oaddr2_bit.addr2 = (address >> 1) & 0x7F; +} + +/** + * @brief enable or disable own address 2. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_own_address2_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->oaddr2_bit.addr2en = new_state; +} + +/** + * @brief enable or disable smbus mode. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param mode: smbus device mode. + * this parameter can be one of the following values: + * - I2C_SMBUS_MODE_DEVICE: smbus device. + * - I2C_SMBUS_MODE_HOST: smbus host. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_smbus_enable(i2c_type *i2c_x, i2c_smbus_mode_type mode, confirm_state new_state) +{ + switch (mode) + { + case I2C_SMBUS_MODE_DEVICE: + i2c_x->ctrl1_bit.devaddren = new_state; + break; + case I2C_SMBUS_MODE_HOST: + i2c_x->ctrl1_bit.haddren = new_state; + break; + default: + break; + } +} + +/** + * @brief enable or disable peripheral. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl1_bit.i2cen = new_state; +} + +/** + * @brief enable or disable clock stretch. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_clock_stretch_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl1_bit.stretch = (!new_state); +} + +/** + * @brief enable or disable ack. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none. + */ +void i2c_ack_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl2_bit.nacken = (!new_state); +} + +/** + * @brief enable or disable 10-bit address mode (master transfer). + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_addr10_mode_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl2_bit.addr10 = new_state; +} + +/** + * @brief config the slave address to be transmitted. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param address: slave address. + * @retval none + */ +void i2c_transfer_addr_set(i2c_type *i2c_x, uint16_t address) +{ + i2c_x->ctrl2_bit.saddr = address & 0x03FF; +} + +/** + * @brief get the slave address to be transmitted. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @retval slave address + */ +uint16_t i2c_transfer_addr_get(i2c_type *i2c_x) +{ + return i2c_x->ctrl2_bit.saddr; +} + +/** + * @brief config the master transfer direction. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param i2c_direction: transfer request direction. + * this parameter can be one of the following values: + * - I2C_DIR_TRANSMIT: master request a write transfer. + * - I2C_DIR_RECEIVE: master request a read transfer. + * @retval none + */ +void i2c_transfer_dir_set(i2c_type *i2c_x, i2c_transfer_dir_type i2c_direction) +{ + i2c_x->ctrl2_bit.dir = i2c_direction; +} + +/** + * @brief slave get the i2c transfer direction. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @retval the value of the slave direction + * - I2C_DIR_TRANSMIT: master request a write transfer, slave enters receiver mode. + * - I2C_DIR_RECEIVE: master request a read transfer, slave enters transmitter mode. + */ +i2c_transfer_dir_type i2c_transfer_dir_get(i2c_type *i2c_x) +{ + if (i2c_x->sts_bit.sdir == 0) + { + return I2C_DIR_TRANSMIT; + } + else + { + return I2C_DIR_RECEIVE; + } +} + +/** + * @brief get the i2c slave matched address. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @retval slave matched address. + */ +uint8_t i2c_matched_addr_get(i2c_type *i2c_x) +{ + return (i2c_x->sts_bit.addr << 1); +} + +/** + * @brief enable or disable auto send stop mode. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_auto_stop_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl2_bit.astopen = new_state; +} + +/** + * @brief enable or disable cnt reload mode. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_reload_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl2_bit.rlden = new_state; +} + +/** + * @brief config the transfer cnt . + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param cnt: transfer cnt. + * @retval none + */ +void i2c_cnt_set(i2c_type *i2c_x, uint8_t cnt) +{ + i2c_x->ctrl2_bit.cnt = cnt; +} + +/** + * @brief enable or disable read 10-bit header, this mode + * only used in 10-bit address mode read. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_addr10_header_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl2_bit.readh10 = new_state; +} + +/** + * @brief enable or disable general call mode. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_general_call_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl1_bit.gcaen = new_state; +} + +/** + * @brief drives the smbus alert pin high or low. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param level + * this parameter can be one of the following values: + * - I2C_SMBUS_ALERT_LOW: smbus alert set low. + * - I2C_SMBUS_ALERT_HIGH: smbus alert set high. + * @retval none + */ +void i2c_smbus_alert_set(i2c_type *i2c_x, i2c_smbus_alert_set_type level) +{ + i2c_x->ctrl1_bit.smbalert = level; +} + +/** + * @brief enable or disable slave data control. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_slave_data_ctrl_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl1_bit.sctrl = new_state; +} + +/** + * @brief enable or disable pec calculate. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_pec_calculate_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl1_bit.pecen = new_state; +} + +/** + * @brief enable or disable pec transfer. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_pec_transmit_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->ctrl2_bit.pecten = new_state; +} + +/** + * @brief get the i2c pec value. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @retval the value of the pec. + */ +uint8_t i2c_pec_value_get(i2c_type *i2c_x) +{ + return (uint8_t)(i2c_x->pec_bit.pecval); +} + +/** + * @brief config the i2c bus timeout. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param timeout: timeout (0x0000~0x0FFF). + * @retval none + */ +void i2c_timeout_set(i2c_type *i2c_x, uint16_t timeout) +{ + i2c_x->timeout_bit.totime = timeout; +} + +/** + * @brief config the bus timeout detcet level. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param level + * this parameter can be one of the following values: + * - I2C_TIMEOUT_DETCET_HIGH: detect high level timeout. + * - I2C_TIMEOUT_DETCET_LOW: detect low level timeout. + * @retval none + */ +void i2c_timeout_detcet_set(i2c_type *i2c_x, i2c_timeout_detcet_type mode) +{ + i2c_x->timeout_bit.tomode = mode; +} + +/** + * @brief enable or disable bus timeout. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_timeout_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->timeout_bit.toen = new_state; +} + +/** + * @brief config the i2c extend bus timeout. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param timeout: extend timeout (0x0000~0x0FFF). + * @retval none + */ +void i2c_ext_timeout_set(i2c_type *i2c_x, uint16_t timeout) +{ + i2c_x->timeout_bit.exttime = timeout; +} + +/** + * @brief enable or disable extend bus timeout. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_ext_timeout_enable(i2c_type *i2c_x, confirm_state new_state) +{ + i2c_x->timeout_bit.exten = new_state; +} + +/** + * @brief enable or disable interrupts. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param i2c_int: interrupts sources. + * this parameter can be one of the following values: + * - I2C_TD_INT: transmit data interrupt. + * - I2C_RD_INT: receive data interrupt. + * - I2C_ADDR_INT: address match interrupt. + * - I2C_ACKFIAL_INT: ack fail interrupt. + * - I2C_STOP_INT: stop detect interrupt. + * - I2C_TDC_INT: transmit data complete interrupt. + * - I2C_ERR_INT: bus error interrupt. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_interrupt_enable(i2c_type *i2c_x, uint32_t source, confirm_state new_state) +{ + if (new_state != FALSE) + { + i2c_x->ctrl1 |= source; + } + else + { + i2c_x->ctrl1 &= (uint32_t)~source; + } +} + +/** + * @brief get interrupt status + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param source + * this parameter can be one of the following values: + * - I2C_TD_INT: transmit data interrupt. + * - I2C_RD_INT: receive data interrupt. + * - I2C_ADDR_INT: address match interrupt. + * - I2C_ACKFIAL_INT: ack fail interrupt. + * - I2C_STOP_INT: stop detect interrupt. + * - I2C_TDC_INT: transmit data complete interrupt. + * - I2C_ERR_INT: bus error interrupt. + * @retval flag_status (SET or RESET) + */ +flag_status i2c_interrupt_get(i2c_type *i2c_x, uint16_t source) +{ + if((i2c_x->ctrl1 & source) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief enable or disable dma requests. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param dma_req: dma transfer request. + * this parameter can be one of the following values: + * - I2C_DMA_REQUEST_TX: dma transmit request. + * - I2C_DMA_REQUEST_RX: dma receive request. + * @param new_state (TRUE or FALSE). + * @retval none + */ +void i2c_dma_enable(i2c_type *i2c_x, i2c_dma_request_type dma_req, confirm_state new_state) +{ + if(dma_req == I2C_DMA_REQUEST_TX) + { + i2c_x->ctrl1_bit.dmaten = new_state; + } + else + { + i2c_x->ctrl1_bit.dmaren = new_state; + } +} + +/** + * @brief config data transfer. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param address: slave address. + * @param cnt: transfer conuter(0~255) + * @param rld_stop: config reload and gen stop condition mode. + * this parameter can be one of the following values: + * - I2C_AUTO_STOP_MODE: auto generate stop mode. + * - I2C_SOFT_STOP_MODE: soft generate stop mode. + * - I2C_RELOAD_MODE: reload mode. + * @param start: config gen start condition mode. + * this parameter can be one of the following values: + * - I2C_WITHOUT_START: transfer data without start condition. + * - I2C_GEN_START_READ: read data and generate start. + * - I2C_GEN_START_WRITE: send data and generate start. + * @retval none + */ +void i2c_transmit_set(i2c_type *i2c_x, uint16_t address, uint8_t cnt, i2c_reload_stop_mode_type rld_stop, i2c_start_mode_type start) +{ + uint32_t temp; + + /* copy ctrl2 value to temp */ + temp = i2c_x->ctrl2; + + /* clear ctrl2_bit specific bits */ + temp &= ~0x03FF67FF; + + /* transfer mode and address set */ + temp |= address | rld_stop | start; + + /* transfer counter set */ + temp |= (uint32_t)cnt << 16; + + /* update ctrl2 value */ + i2c_x->ctrl2 = temp; +} + +/** + * @brief generate start condition. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @retval none + */ +void i2c_start_generate(i2c_type *i2c_x) +{ + i2c_x->ctrl2_bit.genstart = TRUE; +} + +/** + * @brief generate stop condition. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @retval none + */ +void i2c_stop_generate(i2c_type *i2c_x) +{ + i2c_x->ctrl2_bit.genstop = TRUE; +} + +/** + * @brief send a byte through the i2c periph. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param data: byte to be transmitted. + * @retval none + */ +void i2c_data_send(i2c_type *i2c_x, uint8_t data) +{ + i2c_x->txdt = data; +} + +/** + * @brief receive a byte through the i2c periph. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @retval the value of the received data. + */ +uint8_t i2c_data_receive(i2c_type *i2c_x) +{ + return (uint8_t)i2c_x->rxdt; +} + +/** + * @brief get flag status. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - I2C_TDBE_FLAG: transmit data buffer empty flag. + * - I2C_TDIS_FLAG: send interrupt status. + * - I2C_RDBF_FLAG: receive data buffer full flag. + * - I2C_ADDRF_FLAG: 0~7 bit address match flag. + * - I2C_ACKFAIL_FLAG: acknowledge failure flag. + * - I2C_STOPF_FLAG: stop condition generation complete flag. + * - I2C_TDC_FLAG: transmit data complete flag. + * - I2C_TCRLD_FLAG: transmission is complete, waiting to load data. + * - I2C_BUSERR_FLAG: bus error flag. + * - I2C_ARLOST_FLAG: arbitration lost flag. + * - I2C_OUF_FLAG: overflow or underflow flag. + * - I2C_PECERR_FLAG: pec receive error flag. + * - I2C_TMOUT_FLAG: smbus timeout flag. + * - I2C_ALERTF_FLAG: smbus alert flag. + * - I2C_BUSYF_FLAG: bus busy flag transmission mode. + * - I2C_SDIR_FLAG: slave data transmit direction. + * @retval the new state of flag (SET or RESET). + */ +flag_status i2c_flag_get(i2c_type *i2c_x, uint32_t flag) +{ + if((i2c_x->sts & flag) != RESET) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief get interrupt flag status. + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - I2C_TDBE_FLAG: transmit data buffer empty flag. + * - I2C_TDIS_FLAG: send interrupt status. + * - I2C_RDBF_FLAG: receive data buffer full flag. + * - I2C_ADDRF_FLAG: 0~7 bit address match flag. + * - I2C_ACKFAIL_FLAG: acknowledge failure flag. + * - I2C_STOPF_FLAG: stop condition generation complete flag. + * - I2C_TDC_FLAG: transmit data complete flag. + * - I2C_TCRLD_FLAG: transmission is complete, waiting to load data. + * - I2C_BUSERR_FLAG: bus error flag. + * - I2C_ARLOST_FLAG: arbitration lost flag. + * - I2C_OUF_FLAG: overflow or underflow flag. + * - I2C_PECERR_FLAG: pec receive error flag. + * - I2C_TMOUT_FLAG: smbus timeout flag. + * - I2C_ALERTF_FLAG: smbus alert flag. + * @retval the new state of flag (SET or RESET). + */ +flag_status i2c_interrupt_flag_get(i2c_type *i2c_x, uint32_t flag) +{ + __IO uint32_t iten = 0; + + switch(flag) + { + case I2C_TDIS_FLAG: + iten = i2c_x->ctrl1_bit.tdien; + break; + case I2C_RDBF_FLAG: + iten = i2c_x->ctrl1_bit.rdien; + break; + case I2C_ADDRF_FLAG: + iten = i2c_x->ctrl1_bit.addrien; + break; + case I2C_ACKFAIL_FLAG: + iten = i2c_x->ctrl1_bit.ackfailien; + break; + case I2C_STOPF_FLAG: + iten = i2c_x->ctrl1_bit.stopien; + break; + case I2C_TDC_FLAG: + case I2C_TCRLD_FLAG: + iten = i2c_x->ctrl1_bit.tdcien; + break; + case I2C_BUSERR_FLAG: + case I2C_ARLOST_FLAG: + case I2C_OUF_FLAG: + case I2C_PECERR_FLAG: + case I2C_TMOUT_FLAG: + case I2C_ALERTF_FLAG: + iten = i2c_x->ctrl1_bit.errien; + break; + + default: + break; + } + + if(((i2c_x->sts & flag) != RESET) && (iten)) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief clear flag status + * @param i2c_x: to select the i2c peripheral. + * this parameter can be one of the following values: + * I2C1, I2C2, I2C3. + * @param flag: specifies the flag to clear. + * this parameter can be any combination of the following values: + * - I2C_ADDRF_FLAG: 0~7 bit address match flag. + * - I2C_ACKFAIL_FLAG: acknowledge failure flag. + * - I2C_STOPF_FLAG: stop condition generation complete flag. + * - I2C_BUSERR_FLAG: bus error flag. + * - I2C_ARLOST_FLAG: arbitration lost flag. + * - I2C_OUF_FLAG: overflow or underflow flag. + * - I2C_PECERR_FLAG: pec receive error flag. + * - I2C_TMOUT_FLAG: smbus timeout flag. + * - I2C_ALERTF_FLAG: smbus alert flag. + * @retval none + */ +void i2c_flag_clear(i2c_type *i2c_x, uint32_t flag) +{ + i2c_x->clr = flag; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_misc.c b/armlib/at32_sys/drivers/src/at32f435_437_misc.c new file mode 100644 index 000000000..686ec9b92 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_misc.c @@ -0,0 +1,172 @@ +/** + ************************************************************************** + * @file at32f435_437_misc.c + * @brief contains all the functions for the misc firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437_conf.h" +#include "at32f435_437_misc.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup MISC + * @brief MISC driver modules + * @{ + */ + +#ifdef MISC_MODULE_ENABLED + +/** @defgroup MISC_private_functions + * @{ + */ + +#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) + +/** + * @brief system reset + * @param none + * @retval none + */ +void nvic_system_reset(void) +{ + NVIC_SystemReset(); +} + +/** + * @brief enable nvic irq + * @param irqn (IRQn_Type number) + * @param preempt_priority: preemptive priority value (starting from 0) + * @param sub_priority: subpriority value (starting from 0) + * @retval none + */ +void nvic_irq_enable(IRQn_Type irqn, uint32_t preempt_priority, uint32_t sub_priority) +{ + uint32_t temp_priority = 0; + + /* encode priority */ + temp_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preempt_priority, sub_priority); + /* set priority */ + NVIC_SetPriority(irqn, temp_priority); + /* enable irqn */ + NVIC_EnableIRQ(irqn); +} + +/** + * @brief disable nvic irq number + * @param irqn (IRQn_Type number) + * @retval none + */ +void nvic_irq_disable(IRQn_Type irqn) +{ + NVIC_DisableIRQ(irqn); +} + +/** + * @brief config nvic priority group + * @param priority_group + * this parameter can be one of the following values: + * - NVIC_PRIORITY_GROUP_0 + * - NVIC_PRIORITY_GROUP_1 + * - NVIC_PRIORITY_GROUP_2 + * - NVIC_PRIORITY_GROUP_3 + * - NVIC_PRIORITY_GROUP_4 + * @retval none + */ +void nvic_priority_group_config(nvic_priority_group_type priority_group) +{ + /* set the prigroup[10:8] bits according to nvic_prioritygroup value */ + NVIC_SetPriorityGrouping(priority_group); +} + +/** + * @brief set the vector table location and offset. + * @param base + * this parameter can be one of the following values: + * - NVIC_VECTTAB_RAM + * - NVIC_VECTTAB_FLASH + * @param offset (vector table base offset field. this value must be a multiple of 0x200) + * @retval none + */ +void nvic_vector_table_set(uint32_t base, uint32_t offset) +{ + SCB->VTOR = base | (offset & (uint32_t)0x1FFFFF80); +} + +/** + * @brief config nvic lowpower mode + * @param lp_mode + * this parameter can be one of the following values: + * - NVIC_LP_SEVONPEND + * - NVIC_LP_SLEEPDEEP + * - NVIC_LP_SLEEPONEXIT + * @param new_state (new state of lp condition. ENABLE or DISABLE) + * @retval none + */ +void nvic_lowpower_mode_config(nvic_lowpower_mode_type lp_mode, confirm_state new_state) +{ + if(new_state != FALSE) + { + SCB->SCR |= lp_mode; + } + else + { + SCB->SCR &= (uint32_t)(~(uint32_t)lp_mode); + } +} + +/** + * @brief config systick clock source + * @param source + * this parameter can be one of the following values: + * - SYSTICK_CLOCK_SOURCE_AHBCLK_DIV8 + * - SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV + * @retval none + */ +void systick_clock_source_config(systick_clock_source_type source) +{ + if(source == SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV) + { + SysTick->CTRL |= SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV; + } + else + { + SysTick->CTRL &= ~(uint32_t)SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV; + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/armlib/at32_sys/drivers/src/at32f435_437_pwc.c b/armlib/at32_sys/drivers/src/at32f435_437_pwc.c new file mode 100644 index 000000000..ebbf421fb --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_pwc.c @@ -0,0 +1,250 @@ +/** + ************************************************************************** + * @file at32f435_437_pwc.c + * @brief contains all the functions for the pwc firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_pwc.h" +#include "at32f435_437_crm.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup PWC + * @brief PWC driver modules + * @{ + */ + +#ifdef PWC_MODULE_ENABLED + +/** @defgroup PWC_private_functions + * @{ + */ + +/** + * @brief deinitialize the pwc peripheral registers to their default reset values. + * @param none + * @retval none + */ +void pwc_reset(void) +{ + crm_periph_reset(CRM_PWC_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_PWC_PERIPH_RESET, FALSE); +} + +/** + * @brief enable or disable access to the battery powered domain. + * @param new_state: new state of battery powered domain access. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void pwc_battery_powered_domain_access(confirm_state new_state) +{ + PWC->ctrl_bit.bpwen= new_state; +} + +/** + * @brief select the voltage threshold detected by the power voltage detector. + * @param pvm_voltage: select pwc pvm voltage + * this parameter can be one of the following values: + * - PWC_PVM_VOLTAGE_2V3 + * - PWC_PVM_VOLTAGE_2V4 + * - PWC_PVM_VOLTAGE_2V5 + * - PWC_PVM_VOLTAGE_2V6 + * - PWC_PVM_VOLTAGE_2V7 + * - PWC_PVM_VOLTAGE_2V8 + * - PWC_PVM_VOLTAGE_2V9 + * @retval none + */ +void pwc_pvm_level_select(pwc_pvm_voltage_type pvm_voltage) +{ + PWC->ctrl_bit.pvmsel= pvm_voltage; +} + +/** + * @brief enable or disable pwc power voltage monitor (pvm) + * @param new_state: new state of pvm. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void pwc_power_voltage_monitor_enable(confirm_state new_state) +{ + PWC->ctrl_bit.pvmen= new_state; +} + +/** + * @brief enable or disable pwc standby wakeup pin + * @param pin_num: choose the wakeup pin. + * this parameter can be be any combination of the following values: + * - PWC_WAKEUP_PIN_1 + * - PWC_WAKEUP_PIN_2 + * @param new_state: new state of the standby wakeup pin. + * this parameter can be one of the following values: + * - TRUE + * - FALSE + * @retval none + */ +void pwc_wakeup_pin_enable(uint32_t pin_num, confirm_state new_state) +{ + if(new_state == TRUE) + { + PWC->ctrlsts |= pin_num; + } + else + { + PWC->ctrlsts &= ~pin_num; + } +} + +/** + * @brief clear flag of pwc + * @param pwc_flag: select the pwc flag. + * this parameter can be any combination of the following values: + * - PWC_WAKEUP_FLAG + * - PWC_STANDBY_FLAG + * - note:"PWC_PVM_OUTPUT_FLAG" cannot be choose!this bit is readonly bit,it means the voltage monitoring output state + * @retval none + */ +void pwc_flag_clear(uint32_t pwc_flag) +{ + if(pwc_flag & PWC_STANDBY_FLAG) + PWC->ctrl_bit.clsef = TRUE; + if(pwc_flag & PWC_WAKEUP_FLAG) + PWC->ctrl_bit.clswef = TRUE; +} + +/** + * @brief get flag of pwc + * @param pwc_flag: select the pwc flag. + * this parameter can be one of the following values: + * - PWC_WAKEUP_FLAG + * - PWC_STANDBY_FLAG + * - PWC_PVM_OUTPUT_FLAG + * @retval state of select flag(SET or RESET). + */ +flag_status pwc_flag_get(uint32_t pwc_flag) +{ + flag_status status = RESET; + if ((PWC->ctrlsts & pwc_flag) == RESET) + { + status = RESET; + } + else + { + status = SET; + } + return status; +} + +/** + * @brief enter pwc sleep mode + * @param sleep_mode_enter: choose the instruction to enter sleep mode. + * this parameter can be one of the following values: + * - PWC_SLEEP_ENTER_WFI + * - PWC_SLEEP_ENTER_WFE + * @retval none + */ +void pwc_sleep_mode_enter(pwc_sleep_enter_type pwc_sleep_enter) +{ + SCB->SCR &= (uint32_t)~0x4; + if(pwc_sleep_enter == PWC_SLEEP_ENTER_WFE) + { + __SEV(); + __WFE(); + __WFE(); + } + else if(pwc_sleep_enter == PWC_SLEEP_ENTER_WFI) + { + __WFI(); + } +} + +/** + * @brief enter pwc deep-sleep mode + * @param pwc_deep_sleep_enter: choose the instruction to enter deep sleep mode. + * this parameter can be one of the following values: + * - PWC_DEEP_SLEEP_ENTER_WFI + * - PWC_DEEP_SLEEP_ENTER_WFE + * @retval none + */ +void pwc_deep_sleep_mode_enter(pwc_deep_sleep_enter_type pwc_deep_sleep_enter) +{ + SCB->SCR |= 0x04; + if(pwc_deep_sleep_enter == PWC_DEEP_SLEEP_ENTER_WFE) + { + __SEV(); + __WFE(); + __WFE(); + } + else if(pwc_deep_sleep_enter == PWC_DEEP_SLEEP_ENTER_WFI) + { + __WFI(); + } + SCB->SCR &= (uint32_t)~0x4; +} + +/** + * @brief regulate low power consumption in the deep sleep mode + * @param pwc_regulator: set the regulator state. + * this parameter can be one of the following values: + * - PWC_REGULATOR_ON + * - PWC_REGULATOR_LOW_POWER + * @retval none + */ +void pwc_voltage_regulate_set(pwc_regulator_type pwc_regulator) +{ + PWC->ctrl_bit.vrsel = pwc_regulator; +} + +/** + * @brief enter pwc standby mode + * @param none + * @retval none + */ +void pwc_standby_mode_enter(void) +{ + PWC->ctrl_bit.clswef = TRUE; + PWC->ctrl_bit.lpsel = TRUE; + SCB->SCR |= 0x04; +#if defined (__CC_ARM) + __force_stores(); +#endif + while(1) + { + __WFI(); + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_qspi.c b/armlib/at32_sys/drivers/src/at32f435_437_qspi.c new file mode 100644 index 000000000..d7efa567f --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_qspi.c @@ -0,0 +1,499 @@ +/** + ************************************************************************** + * @file at32f435_437_qspi.c + * @brief contain all the functions for qspi firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_crm.h" +#include "at32f435_437_qspi.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup QSPI + * @brief QSPI driver modules + * @{ + */ + +#ifdef QSPI_MODULE_ENABLED + +/** @defgroup QSPI_private_functions + * @{ + */ + +/** + * @brief deinitialize the qspi peripheral registers to their default reset values. + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @retval none + */ +void qspi_reset(qspi_type* qspi_x) +{ + if(qspi_x == QSPI1) + { + crm_periph_reset(CRM_QSPI1_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_QSPI1_PERIPH_RESET, FALSE); + } + else if(qspi_x == QSPI2) + { + crm_periph_reset(CRM_QSPI2_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_QSPI2_PERIPH_RESET, FALSE); + } +} + +/** + * @brief enable/disable encryption for qspi. + * @note the function must be configured only when qspi in command-port mode!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void qspi_encryption_enable(qspi_type* qspi_x, confirm_state new_state) +{ + qspi_x->ctrl_bit.keyen = new_state; +} + +/** + * @brief set qspi sck mode. + * @note the function must be configured only when qspi in command-port mode!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_mode: new state to be set + * this parameter can be one of the following values: + * - QSPI_SCK_MODE_0 + * - QSPI_SCK_MODE_3 + * @retval none + */ +void qspi_sck_mode_set(qspi_type* qspi_x, qspi_clk_mode_type new_mode) +{ + qspi_x->ctrl_bit.sckmode = new_mode; +} + +/** + * @brief set qspi clock division + * @note the function must be configured only when qspi in command-port mode!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_clkdiv: new division value + * this parameter can be one of the following values: + * - QSPI_CLK_DIV_2 + * - QSPI_CLK_DIV_4 + * - QSPI_CLK_DIV_6 + * - QSPI_CLK_DIV_8 + * - QSPI_CLK_DIV_3 + * - QSPI_CLK_DIV_5 + * - QSPI_CLK_DIV_10 + * - QSPI_CLK_DIV_12 + * @retval none + */ +void qspi_clk_division_set(qspi_type* qspi_x, qspi_clk_div_type new_clkdiv) +{ + qspi_x->ctrl_bit.clkdiv = new_clkdiv; +} + +/** + * @brief enable/disable cache in xip mode + * @note the function must be configured only when qspi in command-port mode!!! + * the function only for applications in xip read-only(e.g. qspi flash)!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_state (TRUE or FALSE) + * TRUE: disable cache + * FALSE: enable cache + * @retval none + */ +void qspi_xip_cache_bypass_set(qspi_type* qspi_x, confirm_state new_state) +{ + qspi_x->xip_cmd_w3_bit.bypassc = new_state; +} + +/** + * @brief enable/disable interrupt when command is completed + * @note the function must be configured only when qspi in command-port mode!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void qspi_interrupt_enable(qspi_type* qspi_x, confirm_state new_state) +{ + qspi_x->ctrl2_bit.cmdie = new_state; +} + +/** + * @brief get status flags. + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - QSPI_RXFIFORDY_FLAG + * - QSPI_TXFIFORDY_FLAG + * - QSPI_CMDSTS_FLAG + * @retval the new state of the flag (SET or RESET). + */ +flag_status qspi_flag_get(qspi_type* qspi_x, uint32_t flag) +{ + flag_status bit_status = RESET; + switch(flag) + { + case QSPI_RXFIFORDY_FLAG: + bit_status = (flag_status)qspi_x->fifosts_bit.rxfifordy; + break; + case QSPI_TXFIFORDY_FLAG: + bit_status = (flag_status)qspi_x->fifosts_bit.txfifordy; + break; + case QSPI_CMDSTS_FLAG: + bit_status = (flag_status)qspi_x->cmdsts_bit.cmdsts; + break; + default: + break; + } + return bit_status; +} + +/** + * @brief get interrupt flags. + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param flag: only QSPI_CMDSTS_FLAG valid. + * @retval the new state of the flag (SET or RESET). + */ +flag_status qspi_interrupt_flag_get(qspi_type* qspi_x, uint32_t flag) +{ + if(QSPI_CMDSTS_FLAG != flag) + return RESET; + if(qspi_x->cmdsts_bit.cmdsts && qspi_x->ctrl2_bit.cmdie) + return SET; + else + return RESET; +} + +/** + * @brief clear flags + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param flag: flags to be clear + * this parameter can be one of the following values: + * - QSPI_CMDSTS_FLAG + * @retval none + */ +void qspi_flag_clear(qspi_type* qspi_x, uint32_t flag) +{ + qspi_x->cmdsts = flag; +} + +/** + * @brief set dma threshold for dma rx + * @note the function must be configured only when qspi in command-port mode!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_threshold: value to set + * this parameter can be one of the following values: + * - QSPI_DMA_FIFO_THOD_WORD08 + * - QSPI_DMA_FIFO_THOD_WORD16 + * - QSPI_DMA_FIFO_THOD_WORD24 + * @retval none + */ +void qspi_dma_rx_threshold_set(qspi_type* qspi_x, qspi_dma_fifo_thod_type new_threshold) +{ + qspi_x->ctrl2_bit.rxfifo_thod = new_threshold; +} + +/** + * @brief set dma threshold for dma tx + * @note the function must be configured only when qspi in command-port mode!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_threshold: value to set + * this parameter can be one of the following values: + * - QSPI_DMA_FIFO_THOD_WORD08 + * - QSPI_DMA_FIFO_THOD_WORD16 + * - QSPI_DMA_FIFO_THOD_WORD24 + * @retval none + */ +void qspi_dma_tx_threshold_set(qspi_type* qspi_x, qspi_dma_fifo_thod_type new_threshold) +{ + qspi_x->ctrl2_bit.txfifo_thod = new_threshold; +} + +/** + * @brief enable/disable dma transfer + * @note the function must be configured only when qspi in command-port mode!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void qspi_dma_enable(qspi_type* qspi_x, confirm_state new_state) +{ + qspi_x->ctrl2_bit.dmaen = new_state; +} + +/** + * @brief set wip position in status register of flash + * @note the function must be configured only when qspi in command-port mode!!! + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param busy_pos: value to set + * this parameter can be one of the following values: + * - QSPI_BUSY_OFFSET_0 + * - QSPI_BUSY_OFFSET_1 + * - QSPI_BUSY_OFFSET_2 + * - QSPI_BUSY_OFFSET_3 + * - QSPI_BUSY_OFFSET_4 + * - QSPI_BUSY_OFFSET_5 + * - QSPI_BUSY_OFFSET_6 + * - QSPI_BUSY_OFFSET_7 + * @retval none + */ +void qspi_busy_config(qspi_type* qspi_x, qspi_busy_pos_type busy_pos) +{ + qspi_x->ctrl_bit.busy = busy_pos; +} + +/** + * @brief enable xip mode or command-port mode. + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void qspi_xip_enable(qspi_type* qspi_x, confirm_state new_state) +{ + register uint16_t dly=0; + /* skip if state is no change */ + if(new_state == (confirm_state)(qspi_x->ctrl_bit.xipsel)) + { + return; + } + + /* wait until tx fifo is empty*/ + while(qspi_x->fifosts_bit.txfifordy == 0); + + /* make sure IO is transmitted */ + dly = 64; + while(dly--) + { + __NOP(); + } + + /* flush and reset qspi state */ + qspi_x->ctrl_bit.xiprcmdf = 1; + + /* wait until action is finished */ + while(qspi_x->ctrl_bit.abort); + + /* make sure IO is transmitted */ + dly = 64; + while(dly--) + { + __NOP(); + } + /* set xip mode to new state */ + qspi_x->ctrl_bit.xipsel = new_state; + + /* wait until abort is not set */ + while(qspi_x->ctrl_bit.abort); + + /* wait until cache status valid*/ + if(new_state == TRUE) + { + while( qspi_x->xip_cmd_w3_bit.csts ); + } +} + +/** + * @brief set command-port and qspi_x will start to work + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param qspi_cmd_struct: pointer to qspi cmd structure + * @retval none + */ +void qspi_cmd_operation_kick(qspi_type* qspi_x, qspi_cmd_type* qspi_cmd_struct) +{ + uint32_t w1_val = 0, w3_val = 0; + + /* config analyse cmd_w0 register */ + qspi_x->cmd_w0 = (uint32_t)qspi_cmd_struct->address_code; + + /* config analyse cmd_w1 register */ + w1_val = (uint32_t)qspi_cmd_struct->address_length; + w1_val |= (uint32_t)(qspi_cmd_struct->second_dummy_cycle_num << 16); + w1_val |= (uint32_t)(qspi_cmd_struct->instruction_length << 24); + w1_val |= (uint32_t)(qspi_cmd_struct->pe_mode_enable << 28); + qspi_x->cmd_w1 = w1_val; + + /* config analyse cmd_w2 register */ + qspi_x->cmd_w2 = (uint32_t)qspi_cmd_struct->data_counter; + + /* config analyse cmd_w3 register */ + w3_val = (uint32_t)(qspi_cmd_struct->write_data_enable << 1); + w3_val |= (uint32_t)(qspi_cmd_struct->read_status_enable << 2); + w3_val |= (uint32_t)(qspi_cmd_struct->read_status_config << 3); + w3_val |= (uint32_t)(qspi_cmd_struct->operation_mode << 5); + w3_val |= (uint32_t)(qspi_cmd_struct->pe_mode_operate_code << 16); + w3_val |= (uint32_t)(qspi_cmd_struct->instruction_code << 24); + qspi_x->cmd_w3 = w3_val; +} + +/** + * @brief initial xip mode for qspi_x + * @param qspi_x: select the qspi peripheral. + * this parameter can be one of the following values: + * QSPI1,QSPI2. + * @param xip_init_struct: pointer to xip init structure. + * @retval none. + */ +void qspi_xip_init(qspi_type* qspi_x, qspi_xip_type* xip_init_struct) +{ + uint32_t xc0_val = 0, xc1_val = 0, xc2_val = 0; + /* config analyse xip_cmd_w0 register */ + xc0_val = (uint32_t)xip_init_struct->read_second_dummy_cycle_num; + xc0_val |= (uint32_t)(xip_init_struct->read_operation_mode << 8); + xc0_val |= (uint32_t)(xip_init_struct->read_address_length << 11); + xc0_val |= (uint32_t)(xip_init_struct->read_instruction_code << 12); + qspi_x->xip_cmd_w0 = xc0_val; + + /* config analyse xip_cmd_w1 register */ + xc1_val = (uint32_t)xip_init_struct->write_second_dummy_cycle_num; + xc1_val |= (uint32_t)(xip_init_struct->write_operation_mode << 8); + xc1_val |= (uint32_t)(xip_init_struct->write_address_length << 11); + xc1_val |= (uint32_t)(xip_init_struct->write_instruction_code << 12); + qspi_x->xip_cmd_w1 = xc1_val; + + /* config analyse xip_cmd_w2 register */ + xc2_val = (uint32_t)xip_init_struct->read_data_counter; + xc2_val |= (uint32_t)(xip_init_struct->read_time_counter << 8); + xc2_val |= (uint32_t)(xip_init_struct->read_select_mode << 15); + xc2_val |= (uint32_t)(xip_init_struct->write_data_counter << 16); + xc2_val |= (uint32_t)(xip_init_struct->write_time_counter << 24); + xc2_val |= (uint32_t)(xip_init_struct->write_select_mode << 31); + qspi_x->xip_cmd_w2 = xc2_val; +} + +/** + * @brief read one byte from qspi device in command mode + * @param qspi_x: select the qspi peripheral. + * @retval 8-bit data. + */ +uint8_t qspi_byte_read(qspi_type* qspi_x) +{ + return qspi_x->dt_u8; +} + +/** + * @brief read one half-word from qspi device in command mode + * @param qspi_x: select the qspi peripheral. + * @retval 16-bit data. + */ +uint16_t qspi_half_word_read(qspi_type* qspi_x) +{ + return qspi_x->dt_u16; +} + +/** + * @brief read one word from qspi device in command mode + * @param qspi_x: select the qspi peripheral. + * @retval 32-bit data. + */ +uint32_t qspi_word_read(qspi_type* qspi_x) +{ + return qspi_x->dt; +} + +/** + * @brief write one byte to qspi device in command mode + * @param qspi_x: select the qspi peripheral. + * @param value: 8-bit data. + * @retval none. + */ +void qspi_byte_write(qspi_type* qspi_x, uint8_t value) +{ + qspi_x->dt_u8 = value; +} + +/** + * @brief write one half-word to qspi device in command mode + * @param qspi_x: select the qspi peripheral. + * @param value: 16-bit data. + * @retval none. + */ +void qspi_half_word_write(qspi_type* qspi_x, uint16_t value) +{ + qspi_x->dt_u16 = value; +} + +/** + * @brief write one word to qspi device in command mode + * @param qspi_x: select the qspi peripheral. + * @param value: 32-bit data. + * @retval none. + */ +void qspi_word_write(qspi_type* qspi_x, uint32_t value) +{ + qspi_x->dt = value; +} + +/** + * @brief enable auto input sampling phase correction + * @param qspi_x: select the qspi peripheral. + * @retval none. + */ +void qspi_auto_ispc_enable(qspi_type* qspi_x) +{ + qspi_x->ctrl3_bit.ispc = TRUE; + if(qspi_x == QSPI1) + qspi_x->ctrl3_bit.ispd = 56; + else if(qspi_x == QSPI2) + qspi_x->ctrl3_bit.ispd = 50; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_scfg.c b/armlib/at32_sys/drivers/src/at32f435_437_scfg.c new file mode 100644 index 000000000..dab20b40c --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_scfg.c @@ -0,0 +1,218 @@ +/** + ************************************************************************** + * @file at32f435_437_scfg.c + * @brief contains all the functions for the system config firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_scfg.h" +#include "at32f435_437_crm.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup SCFG + * @brief SCFG driver modules + * @{ + */ + +#ifdef SCFG_MODULE_ENABLED + +/** @defgroup SCFG_private_functions + * @{ + */ + +/** + * @brief scfg reset + * @param none + * @retval none + */ +void scfg_reset(void) +{ + crm_periph_reset(CRM_SCFG_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_SCFG_PERIPH_RESET, FALSE); +} + +/** + * @brief scfg xmc address mapping swap set + * @param xmc_swap + * this parameter can be one of the following values: + * - SCFG_XMC_SWAP_NONE + * - SCFG_XMC_SWAP_MODE1 + * - SCFG_XMC_SWAP_MODE2 + * - SCFG_XMC_SWAP_MODE3 + * @retval none + */ +void scfg_xmc_mapping_swap_set(scfg_xmc_swap_type xmc_swap) +{ + SCFG->cfg1_bit.swap_xmc = xmc_swap; +} + +/** + * @brief scfg infrared config + * @param source + * this parameter can be one of the following values: + * - SCFG_IR_SOURCE_TMR10 + * @param polarity + * this parameter can be one of the following values: + * - SCFG_IR_POLARITY_NO_AFFECTE + * - SCFG_IR_POLARITY_REVERSE + * @retval none + */ +void scfg_infrared_config(scfg_ir_source_type source, scfg_ir_polarity_type polarity) +{ + SCFG->cfg1_bit.ir_src_sel = source; + SCFG->cfg1_bit.ir_pol = polarity; +} + +/** + * @brief scfg memory address mapping set + * @param mem_map + * this parameter can be one of the following values: + * - SCFG_MEM_MAP_MAIN_MEMORY + * - SCFG_MEM_MAP_BOOT_MEMORY + * - SCFG_MEM_MAP_XMC_BANK1 + * - SCFG_MEM_MAP_INTERNAL_SRAM + * - SCFG_MEM_MAP_XMC_SDRAM_BANK1 + * @retval none + */ +void scfg_mem_map_set(scfg_mem_map_type mem_map) +{ + SCFG->cfg1_bit.mem_map_sel = mem_map; +} + +/** + * @brief scfg emac interface set + * @param mode + * this parameter can be one of the following values: + * - SCFG_EMAC_SELECT_MII + * - SCFG_EMAC_SELECT_RMII + * @retval none + */ +void scfg_emac_interface_set(scfg_emac_interface_type mode) +{ + SCFG->cfg2_bit.mii_rmii_sel = mode; +} + +/** + * @brief select the gpio pin used as exint line. + * @param port_source: + * select the gpio port to be used as source for exint lines. + * this parameter can be one of the following values: + * - SCFG_PORT_SOURCE_GPIOA + * - SCFG_PORT_SOURCE_GPIOB + * - SCFG_PORT_SOURCE_GPIOC + * - SCFG_PORT_SOURCE_GPIOD + * - SCFG_PORT_SOURCE_GPIOE + * - SCFG_PORT_SOURCE_GPIOF + * - SCFG_PORT_SOURCE_GPIOG + * - SCFG_PORT_SOURCE_GPIOH + * @param pin_source: + * specifies the exint line to be configured. + * this parameter can be one of the following values: + * - SCFG_PINS_SOURCE0 + * - SCFG_PINS_SOURCE1 + * - SCFG_PINS_SOURCE2 + * - SCFG_PINS_SOURCE3 + * - SCFG_PINS_SOURCE4 + * - SCFG_PINS_SOURCE5 + * - SCFG_PINS_SOURCE6 + * - SCFG_PINS_SOURCE7 + * - SCFG_PINS_SOURCE8 + * - SCFG_PINS_SOURCE9 + * - SCFG_PINS_SOURCE10 + * - SCFG_PINS_SOURCE11 + * - SCFG_PINS_SOURCE12 + * - SCFG_PINS_SOURCE13 + * - SCFG_PINS_SOURCE14 + * - SCFG_PINS_SOURCE15 + * @retval none + */ +void scfg_exint_line_config(scfg_port_source_type port_source, scfg_pins_source_type pin_source) +{ + uint32_t tmp = 0x00; + tmp = ((uint32_t)0x0F) << (0x04 * (pin_source & (uint8_t)0x03)); + + switch (pin_source >> 0x02) + { + case 0: + SCFG->exintc1 &= ~tmp; + SCFG->exintc1 |= (((uint32_t)port_source) << (0x04 * (pin_source & (uint8_t)0x03))); + break; + case 1: + SCFG->exintc2 &= ~tmp; + SCFG->exintc2 |= (((uint32_t)port_source) << (0x04 * (pin_source & (uint8_t)0x03))); + break; + case 2: + SCFG->exintc3 &= ~tmp; + SCFG->exintc3 |= (((uint32_t)port_source) << (0x04 * (pin_source & (uint8_t)0x03))); + break; + case 3: + SCFG->exintc4 &= ~tmp; + SCFG->exintc4 |= (((uint32_t)port_source) << (0x04 * (pin_source & (uint8_t)0x03))); + break; + default: + break; + } +} + +/** + * @brief enable or disable gpio pins ultra driven. + * @param value: + * this parameter can be one of the following values: + * - SCFG_ULTRA_DRIVEN_PB3 + * - SCFG_ULTRA_DRIVEN_PB9 + * - SCFG_ULTRA_DRIVEN_PB10 + * - SCFG_ULTRA_DRIVEN_PD12 + * - SCFG_ULTRA_DRIVEN_PD13 + * - SCFG_ULTRA_DRIVEN_PD14 + * - SCFG_ULTRA_DRIVEN_PD15 + * - SCFG_ULTRA_DRIVEN_PF14 + * - SCFG_ULTRA_DRIVEN_PF15 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void scfg_pins_ultra_driven_enable(scfg_ultra_driven_pins_type value, confirm_state new_state) +{ + if(TRUE == new_state) + { + SCFG_REG(value) |= SCFG_REG_BIT(value); + } + else + { + SCFG_REG(value) &= ~(SCFG_REG_BIT(value)); + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_sdio.c b/armlib/at32_sys/drivers/src/at32f435_437_sdio.c new file mode 100644 index 000000000..a22a28079 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_sdio.c @@ -0,0 +1,617 @@ +/** + ************************************************************************** + * @file at32f435_437_sdio.c + * @brief contains all the functions for the sdio firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup SDIO + * @brief SDIO driver modules + * @{ + */ + +#ifdef SDIO_MODULE_ENABLED + +/** @defgroup SDIO_private_functions + * @{ + */ + +/** + * @brief reset the sdio register + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @retval none + */ +void sdio_reset(sdio_type *sdio_x) +{ + sdio_x->pwrctrl = 0x0; + sdio_x->clkctrl = 0x0; + sdio_x->argu = 0x0; + sdio_x->cmdctrl = 0x0; + sdio_x->dttmr = 0x0; + sdio_x->dtlen = 0x0; + sdio_x->dtctrl = 0x0; + sdio_x->inten = 0x0; + sdio_x->intclr = 0x004007FF; +} + +/** + * @brief set the power status of the controller + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param power_state + * this parameter can be one of the following values: + * - SDIO_POWER_OFF + * - SDIO_POWER_ON + * @retval none + */ +void sdio_power_set(sdio_type *sdio_x, sdio_power_state_type power_state) +{ + sdio_x->pwrctrl_bit.ps = power_state; +} + +/** + * @brief get power status. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @retval sdio_power_state_type (SDIO_POWER_ON or SDIO_POWER_OFF) + */ +sdio_power_state_type sdio_power_status_get(sdio_type *sdio_x) +{ + return (sdio_power_state_type)(sdio_x->pwrctrl_bit.ps); +} + +/** + * @brief config sdio clock + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param clk_div: sdio clock divide factor(frequency = sdio_clk / [clk_psc + 2]). + * @param clk_edg + * this parameter can be one of the following values: + * - SDIO_CLOCK_EDGE_RISING + * - SDIO_CLOCK_EDGE_FALLING + * @retval none + */ +void sdio_clock_config(sdio_type *sdio_x, uint16_t clk_div, sdio_edge_phase_type clk_edg) +{ + /* config clock edge */ + sdio_x->clkctrl_bit.clkegs = clk_edg; + + /* config clock divide [7:0] */ + sdio_x->clkctrl_bit.clkdiv_l = (clk_div & 0xFF); + + /* config clock divide [9:8] */ + sdio_x->clkctrl_bit.clkdiv_h = ((clk_div & 0x300) >> 8); +} + +/** + * @brief config sdio bus width + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param width + * this parameter can be one of the following values: + * - SDIO_BUS_WIDTH_D1 + * - SDIO_BUS_WIDTH_D4 + * - SDIO_BUS_WIDTH_D8 + * @retval none + */ +void sdio_bus_width_config(sdio_type *sdio_x, sdio_bus_width_type width) +{ + sdio_x->clkctrl_bit.busws = width; +} + +/** + * @brief enable or disable clock divider bypss + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_clock_bypass(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->clkctrl_bit.bypsen = new_state; +} + +/** + * @brief enable or disable power saving mode, config sdio_ck clock output + * when the bus is idle. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_power_saving_mode_enable(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->clkctrl_bit.pwrsven = new_state; +} + +/** + * @brief enable or disable hardware flow control. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_flow_control_enable(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->clkctrl_bit.hfcen = new_state; +} + +/** + * @brief enable or disable sdio_ck output. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_clock_enable(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->clkctrl_bit.clkoen = new_state; +} + +/** + * @brief enable or disable dma. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_dma_enable(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->dtctrl_bit.dmaen = new_state; +} + +/** + * @brief config corresponding interrupt. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param int_opt + * this parameter can be one of the following values: + * - SDIO_CMDFAIL_INT + * - SDIO_DTFAIL_INT + * - SDIO_CMDTIMEOUT_INT + * - SDIO_DTTIMEOUT_INT + * - SDIO_TXERRU_INT + * - SDIO_RXERRO_INT + * - SDIO_CMDRSPCMPL_INT + * - SDIO_CMDCMPL_INT + * - SDIO_DTCMP_INT + * - SDIO_SBITERR_INT + * - SDIO_DTBLKCMPL_INT + * - SDIO_DOCMD_INT + * - SDIO_DOTX_INT + * - SDIO_DORX_INT + * - SDIO_TXBUFH_INT + * - SDIO_RXBUFH_INT + * - SDIO_TXBUFF_INT + * - SDIO_RXBUFF_INT + * - SDIO_TXBUFE_INT + * - SDIO_RXBUFE_INT + * - SDIO_TXBUF_INT + * - SDIO_RXBUF_INT + * - SDIO_SDIOIF_INT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_interrupt_enable(sdio_type *sdio_x, uint32_t int_opt, confirm_state new_state) +{ + /* enable interrupt */ + if(TRUE == new_state) + { + sdio_x->inten |= int_opt; + } + /* disable interrupt */ + else + { + sdio_x->inten &= ~(int_opt); + } +} + +/** + * @brief get sdio interrupt flag. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param flag + * this parameter can be one of the following values: + * - SDIO_CMDFAIL_FLAG + * - SDIO_DTFAIL_FLAG + * - SDIO_CMDTIMEOUT_FLAG + * - SDIO_DTTIMEOUT_FLAG + * - SDIO_TXERRU_FLAG + * - SDIO_RXERRO_FLAG + * - SDIO_CMDRSPCMPL_FLAG + * - SDIO_CMDCMPL_FLAG + * - SDIO_DTCMPL_FLAG + * - SDIO_SBITERR_FLAG + * - SDIO_DTBLKCMPL_FLAG + * - SDIO_DOCMD_FLAG + * - SDIO_DOTX_FLAG + * - SDIO_DORX_FLAG + * - SDIO_TXBUFH_FLAG + * - SDIO_RXBUFH_FLAG + * - SDIO_TXBUFF_FLAG + * - SDIO_RXBUFF_FLAG + * - SDIO_TXBUFE_FLAG + * - SDIO_RXBUFE_FLAG + * - SDIO_TXBUF_FLAG + * - SDIO_RXBUF_FLAG + * - SDIO_SDIOIF_FLAG + * @retval flag_status (SET or RESET) + */ +flag_status sdio_interrupt_flag_get(sdio_type *sdio_x, uint32_t flag) +{ + flag_status status = RESET; + + if((sdio_x->inten & flag) && (sdio_x->sts & flag)) + { + status = SET; + } + + return status; +} + +/** + * @brief get sdio flag. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param flag + * this parameter can be one of the following values: + * - SDIO_CMDFAIL_FLAG + * - SDIO_DTFAIL_FLAG + * - SDIO_CMDTIMEOUT_FLAG + * - SDIO_DTTIMEOUT_FLAG + * - SDIO_TXERRU_FLAG + * - SDIO_RXERRO_FLAG + * - SDIO_CMDRSPCMPL_FLAG + * - SDIO_CMDCMPL_FLAG + * - SDIO_DTCMPL_FLAG + * - SDIO_SBITERR_FLAG + * - SDIO_DTBLKCMPL_FLAG + * - SDIO_DOCMD_FLAG + * - SDIO_DOTX_FLAG + * - SDIO_DORX_FLAG + * - SDIO_TXBUFH_FLAG + * - SDIO_RXBUFH_FLAG + * - SDIO_TXBUFF_FLAG + * - SDIO_RXBUFF_FLAG + * - SDIO_TXBUFE_FLAG + * - SDIO_RXBUFE_FLAG + * - SDIO_TXBUF_FLAG + * - SDIO_RXBUF_FLAG + * - SDIO_SDIOIF_FLAG + * @retval flag_status (SET or RESET) + */ +flag_status sdio_flag_get(sdio_type *sdio_x, uint32_t flag) +{ + flag_status status = RESET; + + if((sdio_x->sts & flag) == flag) + { + status = SET; + } + else + { + status = RESET; + } + + return status; +} + +/** + * @brief clear sdio flag. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param int_opt + * this parameter can be any combination of the following values: + * - SDIO_CMDFAIL_FLAG + * - SDIO_DTFAIL_FLAG + * - SDIO_CMDTIMEOUT_FLAG + * - SDIO_DTTIMEOUT_FLAG + * - SDIO_TXERRU_FLAG + * - SDIO_RXERRO_FLAG + * - SDIO_CMDRSPCMPL_FLAG + * - SDIO_CMDCMPL_FLAG + * - SDIO_DTCMPL_FLAG + * - SDIO_SBITERR_FLAG + * - SDIO_DTBLKCMPL_FLAG + * - SDIO_SDIOIF_FLAG + * @retval none + */ +void sdio_flag_clear(sdio_type *sdio_x, uint32_t flag) +{ + sdio_x->intclr = flag; +} + +/** + * @brief config sdio command. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param command_struct : pointer to a sdio_command_struct_type structure + * that contains the configuration information for the sdio command. + * @retval none + */ +void sdio_command_config(sdio_type *sdio_x, sdio_command_struct_type *command_struct) +{ + /* disable command path state machine */ + sdio_x->cmdctrl_bit.ccsmen = FALSE; + + /* config command argument */ + sdio_x->argu = command_struct->argument; + + /* config command register */ + sdio_x->cmdctrl_bit.cmdidx = command_struct->cmd_index; + sdio_x->cmdctrl_bit.rspwt = command_struct->rsp_type; + sdio_x->cmdctrl_bit.intwt = (command_struct->wait_type & 0x1); /* [1:0] -> [0] */ + sdio_x->cmdctrl_bit.pndwt = (command_struct->wait_type & 0x2)>>1; /* [1:0] -> [1] */ +} + +/** + * @brief enable or disable command path state machine(CPSM). + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_command_state_machine_enable(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->cmdctrl_bit.ccsmen = new_state; +} + +/** + * @brief get command index of last command for which response received. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval uint8_t: command index + */ +uint8_t sdio_command_response_get(sdio_type *sdio_x) +{ + return sdio_x->rspcmd_bit.rspcmd; +} + +/** + * @brief get response received from the card for the last command. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param reg_index + * this parameter can be one of the following values: + * - SDIO_RSP1_INDEX + * - SDIO_RSP2_INDEX + * - SDIO_RSP3_INDEX + * - SDIO_RSP4_INDEX + * @retval uint32_t: response register value + */ +uint32_t sdio_response_get(sdio_type *sdio_x, sdio_rsp_index_type reg_index) +{ + uint32_t response_value = 0; + + switch(reg_index) + { + case SDIO_RSP1_INDEX: + response_value = sdio_x->rsp1; + break; + case SDIO_RSP2_INDEX: + response_value = sdio_x->rsp2; + break; + case SDIO_RSP3_INDEX: + response_value = sdio_x->rsp3; + break; + case SDIO_RSP4_INDEX: + response_value = sdio_x->rsp4; + break; + default: break; + } + + return response_value; +} + +/** + * @brief config sdio data. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param data_struct : pointer to a sdio_data_struct_type structure + * that contains the configuration information for the sdio data. + * @retval none + */ +void sdio_data_config(sdio_type *sdio_x, sdio_data_struct_type *data_struct) +{ + /* disable data path state machine */ + sdio_x->dtctrl_bit.tfren = FALSE; + + /* config data block, transfer mode and transfer direction */ + sdio_x->dtctrl_bit.blksize = data_struct->block_size; + sdio_x->dtctrl_bit.tfrdir = data_struct->transfer_direction; + sdio_x->dtctrl_bit.tfrmode = data_struct->transfer_mode; + + /* config data length */ + sdio_x->dtlen_bit.dtlen = data_struct->data_length; + + /* config data transfer timeout */ + sdio_x->dttmr_bit.timeout = data_struct->timeout; +} + +/** + * @brief enable or disable data path state machine(DPSM). + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_data_state_machine_enable(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->dtctrl_bit.tfren = new_state; +} + +/** + * @brief get the number of remaining data bytes to be transferred. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @retval uint32_t: number of bytes + */ +uint32_t sdio_data_counter_get(sdio_type *sdio_x) +{ + return sdio_x->dtcnt; +} + +/** + * @brief read a word data from sdio fifo. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @retval uint32_t: data received + */ +uint32_t sdio_data_read(sdio_type *sdio_x) +{ + return sdio_x->buf; +} + +/** + * @brief get the number of words left to be written to or read from fifo.. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @retval uint32_t: number of words + */ +uint32_t sdio_buffer_counter_get(sdio_type *sdio_x) +{ + return sdio_x->bufcnt; +} + +/** + * @brief write one word data to fifo. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param data: data to be transferred. + * @retval none + */ +void sdio_data_write(sdio_type *sdio_x, uint32_t data) +{ + sdio_x->buf = data; +} + +/** + * @brief set the read wait mode. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param mode + * this parameter can be one of the following values: + * - SDIO_READ_WAIT_CONTROLLED_BY_D2 + * - SDIO_READ_WAIT_CONTROLLED_BY_CK + * @retval none + */ +void sdio_read_wait_mode_set(sdio_type *sdio_x, sdio_read_wait_mode_type mode) +{ + sdio_x->dtctrl_bit.rdwtmode = mode; +} + +/** + * @brief enable or disable to start sd i/o read wait operation. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_read_wait_start(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->dtctrl_bit.rdwtstart = new_state; +} + +/** + * @brief enable or disable to stop sd i/o read wait operation. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_read_wait_stop(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->dtctrl_bit.rdwtstop = new_state; +} + +/** + * @brief enable or disable the sd i/o function. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_io_function_enable(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->dtctrl_bit.ioen = new_state; +} + +/** + * @brief enable or disable sd i/o suspend command sending. + * @param sdio_x: to select the sdio peripheral. + * this parameter can be one of the following values: + * SDIO1, SDIO2. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void sdio_io_suspend_command_set(sdio_type *sdio_x, confirm_state new_state) +{ + sdio_x->cmdctrl_bit.iosusp = new_state; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_spi.c b/armlib/at32_sys/drivers/src/at32f435_437_spi.c new file mode 100644 index 000000000..d3f70458f --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_spi.c @@ -0,0 +1,720 @@ +/** + ************************************************************************** + * @file at32f435_437_spi.c + * @brief contains all the functions for the spi firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_crm.h" +#include "at32f435_437_spi.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup SPI + * @brief SPI driver modules + * @{ + */ + +#ifdef SPI_MODULE_ENABLED + +/** @defgroup SPI_private_functions + * @{ + */ + +/** + * @brief spi reset by crm reset register + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @retval none + */ +void spi_i2s_reset(spi_type *spi_x) +{ + if(spi_x == SPI1) + { + crm_periph_reset(CRM_SPI1_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_SPI1_PERIPH_RESET, FALSE); + } + else if(spi_x == SPI2) + { + crm_periph_reset(CRM_SPI2_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_SPI2_PERIPH_RESET, FALSE); + } + else if(spi_x == SPI3) + { + crm_periph_reset(CRM_SPI3_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_SPI3_PERIPH_RESET, FALSE); + } + else if(spi_x == SPI4) + { + crm_periph_reset(CRM_SPI4_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_SPI4_PERIPH_RESET, FALSE); + } +} + +/** + * @brief spi init config with its default value. + * @param spi_init_struct : pointer to a spi_init_type structure which will + * be initialized. + * @retval none + */ +void spi_default_para_init(spi_init_type* spi_init_struct) +{ + spi_init_struct->transmission_mode = SPI_TRANSMIT_FULL_DUPLEX; + spi_init_struct->master_slave_mode = SPI_MODE_SLAVE; + spi_init_struct->mclk_freq_division = SPI_MCLK_DIV_2; + spi_init_struct->first_bit_transmission = SPI_FIRST_BIT_MSB; + spi_init_struct->frame_bit_num = SPI_FRAME_8BIT; + spi_init_struct->clock_polarity = SPI_CLOCK_POLARITY_LOW; + spi_init_struct->clock_phase = SPI_CLOCK_PHASE_1EDGE; + spi_init_struct->cs_mode_selection = SPI_CS_SOFTWARE_MODE; +} + +/** + * @brief spi init config with its setting value. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param spi_init_struct : pointer to a spi_init_type structure which will be initialized. + * @retval none + */ +void spi_init(spi_type* spi_x, spi_init_type* spi_init_struct) +{ + spi_x->i2sctrl_bit.i2smsel = FALSE; + if(spi_init_struct->transmission_mode == SPI_TRANSMIT_FULL_DUPLEX) + { + spi_x->ctrl1_bit.slben = FALSE; + spi_x->ctrl1_bit.slbtd = FALSE; + spi_x->ctrl1_bit.ora = FALSE; + } + else if(spi_init_struct->transmission_mode == SPI_TRANSMIT_SIMPLEX_RX) + { + spi_x->ctrl1_bit.slben = FALSE; + spi_x->ctrl1_bit.slbtd = FALSE; + spi_x->ctrl1_bit.ora = TRUE; + } + else if(spi_init_struct->transmission_mode == SPI_TRANSMIT_HALF_DUPLEX_RX) + { + spi_x->ctrl1_bit.slben = TRUE; + spi_x->ctrl1_bit.slbtd = FALSE; + spi_x->ctrl1_bit.ora = FALSE; + } + else if(spi_init_struct->transmission_mode == SPI_TRANSMIT_HALF_DUPLEX_TX) + { + spi_x->ctrl1_bit.slben = TRUE; + spi_x->ctrl1_bit.slbtd = TRUE; + spi_x->ctrl1_bit.ora = FALSE; + } + + spi_x->ctrl1_bit.swcsen = spi_init_struct->cs_mode_selection; + if((spi_init_struct->master_slave_mode == SPI_MODE_MASTER) && (spi_init_struct->cs_mode_selection == SPI_CS_SOFTWARE_MODE)) + { + spi_x->ctrl1_bit.swcsil = TRUE; + } + else + { + spi_x->ctrl1_bit.swcsil = FALSE; + } + spi_x->ctrl1_bit.msten = spi_init_struct->master_slave_mode; + + if(spi_init_struct->mclk_freq_division <= SPI_MCLK_DIV_256) + { + spi_x->ctrl2_bit.mdiv3en = FALSE; + spi_x->ctrl2_bit.mdiv_h = FALSE; + spi_x->ctrl1_bit.mdiv_l = spi_init_struct->mclk_freq_division; + } + else if(spi_init_struct->mclk_freq_division == SPI_MCLK_DIV_3) + { + spi_x->ctrl2_bit.mdiv3en = TRUE; + spi_x->ctrl2_bit.mdiv_h = FALSE; + spi_x->ctrl1_bit.mdiv_l = 0; + } + else + { + spi_x->ctrl2_bit.mdiv3en = FALSE; + spi_x->ctrl2_bit.mdiv_h = TRUE; + spi_x->ctrl1_bit.mdiv_l = spi_init_struct->mclk_freq_division & 0x7; + } + + spi_x->ctrl1_bit.ltf = spi_init_struct->first_bit_transmission; + spi_x->ctrl1_bit.fbn = spi_init_struct->frame_bit_num; + spi_x->ctrl1_bit.clkpol = spi_init_struct->clock_polarity; + spi_x->ctrl1_bit.clkpha = spi_init_struct->clock_phase; +} + +/** + * @brief enable or disable the ti mode for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param new_state: new state of ti mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void spi_ti_mode_enable(spi_type* spi_x, confirm_state new_state) +{ + spi_x->ctrl2_bit.tien = new_state; +} + +/** + * @brief spi next transmit crc for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @retval none + */ +void spi_crc_next_transmit(spi_type* spi_x) +{ + spi_x->ctrl1_bit.ntc = TRUE; +} + +/** + * @brief set the crc polynomial value for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param crc_poly: crc polynomial value. + * @retval none + */ +void spi_crc_polynomial_set(spi_type* spi_x, uint16_t crc_poly) +{ + spi_x->cpoly_bit.cpoly = crc_poly; +} + +/** + * @brief return the crc polynomial register value for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @retval the select crc polynomial register value + */ +uint16_t spi_crc_polynomial_get(spi_type* spi_x) +{ + return spi_x->cpoly_bit.cpoly; +} + +/** + * @brief enable or disable the hardware crc calculation for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param new_state: new state of crc calculation. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void spi_crc_enable(spi_type* spi_x, confirm_state new_state) +{ + spi_x->ctrl1_bit.ccen = new_state; +} + +/** + * @brief return the transmit or the receive crc value for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param crc_direction: select transmit or receive crc value to be read + * - SPI_CRC_RX + * - SPI_CRC_TX + * @retval the select crc register value + */ +uint16_t spi_crc_value_get(spi_type* spi_x, spi_crc_direction_type crc_direction) +{ + if(crc_direction == SPI_CRC_RX) + return spi_x->rcrc_bit.rcrc; + else + return spi_x->tcrc_bit.tcrc; +} + +/** + * @brief enable or disable the hardware cs output for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param new_state: new state of spi master cs output. + * this parameter can be: TRUE or FALSE. + * note:the bit only use in spi master mode + * @retval none + */ +void spi_hardware_cs_output_enable(spi_type* spi_x, confirm_state new_state) +{ + spi_x->ctrl2_bit.hwcsoe = new_state; +} + +/** + * @brief set the software cs internal level for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param level: set the state of spi cs level. + * this parameter can be one of the following values: + * - SPI_SWCS_INTERNAL_LEVEL_LOW + * - SPI_SWCS_INTERNAL_LEVEL_HIGHT + * note:the bit only use when swcsen bit is set. + * note:when use this bit,io operation on the cs pin are invalid. + * @retval none + */ +void spi_software_cs_internal_level_set(spi_type* spi_x, spi_software_cs_level_type level) +{ + spi_x->ctrl1_bit.swcsil = level; +} + +/** + * @brief set the data frame bit num for the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param bit_num: set the data frame size + * - SPI_FRAME_8BIT + * - SPI_FRAME_16BIT + * @retval none + */ +void spi_frame_bit_num_set(spi_type* spi_x, spi_frame_bit_num_type bit_num) +{ + spi_x->ctrl1_bit.fbn = bit_num; +} + +/** + * @brief set the data transmission direction in single line bidirectiona half duplex mode of the spi peripheral. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param direction: data transfer direction + * this parameter can be one of the following values: + * - SPI_HALF_DUPLEX_DIRECTION_RX + * - SPI_HALF_DUPLEX_DIRECTION_TX + * @retval none + */ +void spi_half_duplex_direction_set(spi_type* spi_x, spi_half_duplex_direction_type direction) +{ + spi_x->ctrl1_bit.slbtd = direction; +} + +/** + * @brief enable or disable spi. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 + * @param new_state: new state of spi. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void spi_enable(spi_type* spi_x, confirm_state new_state) +{ + spi_x->ctrl1_bit.spien = new_state; +} + +/** + * @brief i2s init config with its default value. + * @param i2s_init_struct : pointer to a i2s_init_type structure which will + * be initialized. + * @retval none + */ +void i2s_default_para_init(i2s_init_type* i2s_init_struct) +{ + i2s_init_struct->operation_mode = I2S_MODE_SLAVE_TX; + i2s_init_struct->audio_protocol = I2S_AUDIO_PROTOCOL_PHILLIPS; + i2s_init_struct->audio_sampling_freq = I2S_AUDIO_FREQUENCY_DEFAULT; + i2s_init_struct->data_channel_format = I2S_DATA_16BIT_CHANNEL_16BIT; + i2s_init_struct->clock_polarity = I2S_CLOCK_POLARITY_LOW; + i2s_init_struct->mclk_output_enable = FALSE; +} + +/** + * @brief i2s init config with its setting value. + * @param spi_x: select the spi peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param i2s_init_struct : pointer to a i2s_init_type structure which will be initialized. + * @retval none + */ +void i2s_init(spi_type* spi_x, i2s_init_type* i2s_init_struct) +{ + crm_clocks_freq_type clocks_freq; + uint32_t i2s_sclk_index = 0; + uint32_t i2sdiv_index = 2, i2sodd_index = 0, frequency_index = 0; + + /* i2s audio frequency config */ + if(i2s_init_struct->audio_sampling_freq == I2S_AUDIO_FREQUENCY_DEFAULT) + { + i2sodd_index = 0; + i2sdiv_index = 2; + } + else + { + crm_clocks_freq_get(&clocks_freq); + i2s_sclk_index = clocks_freq.sclk_freq; + if((i2s_init_struct->audio_protocol == I2S_AUDIO_PROTOCOL_PCM_SHORT) || (i2s_init_struct->audio_protocol == I2S_AUDIO_PROTOCOL_PCM_LONG)) + { + if(i2s_init_struct->mclk_output_enable == TRUE) + { + frequency_index = (((i2s_sclk_index / 128) * 10) / i2s_init_struct->audio_sampling_freq) + 5; + } + else + { + if(i2s_init_struct->data_channel_format == I2S_DATA_16BIT_CHANNEL_16BIT) + frequency_index = (((i2s_sclk_index / 16) * 10) / i2s_init_struct->audio_sampling_freq) + 5; + else + frequency_index = (((i2s_sclk_index / 32) * 10) / i2s_init_struct->audio_sampling_freq) + 5; + } + } + else + { + if(i2s_init_struct->mclk_output_enable == TRUE) + { + frequency_index = (((i2s_sclk_index / 256) * 10) / i2s_init_struct->audio_sampling_freq) + 5; + } + else + { + if(i2s_init_struct->data_channel_format == I2S_DATA_16BIT_CHANNEL_16BIT) + frequency_index = (((i2s_sclk_index / 32) * 10) / i2s_init_struct->audio_sampling_freq) + 5; + else + frequency_index = (((i2s_sclk_index / 64) * 10) / i2s_init_struct->audio_sampling_freq) + 5; + } + } + } + frequency_index = frequency_index / 10; + i2sodd_index = frequency_index & (uint16_t)0x0001; + i2sdiv_index = (frequency_index - i2sodd_index) / 2; + if((i2sdiv_index < 2) || (i2sdiv_index > 0x03FF)) + { + i2sodd_index = 0; + i2sdiv_index = 2; + } + spi_x->i2sclk_bit.i2sodd = i2sodd_index; + if(i2sdiv_index > 0x00FF) + { + spi_x->i2sclk_bit.i2sdiv_h = (i2sdiv_index >> 8) & 0x0003; + spi_x->i2sclk_bit.i2sdiv_l = i2sdiv_index & 0x00FF; + } + else + { + spi_x->i2sclk_bit.i2sdiv_h = 0; + spi_x->i2sclk_bit.i2sdiv_l = i2sdiv_index; + } + + /* i2s audio_protocol set*/ + if(i2s_init_struct->audio_protocol == I2S_AUDIO_PROTOCOL_PCM_LONG) + { + spi_x->i2sctrl_bit.pcmfssel = 1; + spi_x->i2sctrl_bit.stdsel = 3; + } + else if(i2s_init_struct->audio_protocol == I2S_AUDIO_PROTOCOL_PCM_SHORT) + { + spi_x->i2sctrl_bit.pcmfssel = 0; + spi_x->i2sctrl_bit.stdsel = 3; + } + else if(i2s_init_struct->audio_protocol == I2S_AUDIO_PROTOCOL_LSB) + { + spi_x->i2sctrl_bit.pcmfssel = 0; + spi_x->i2sctrl_bit.stdsel = 2; + } + else if(i2s_init_struct->audio_protocol == I2S_AUDIO_PROTOCOL_MSB) + { + spi_x->i2sctrl_bit.pcmfssel = 0; + spi_x->i2sctrl_bit.stdsel = 1; + } + else if(i2s_init_struct->audio_protocol == I2S_AUDIO_PROTOCOL_PHILLIPS) + { + spi_x->i2sctrl_bit.pcmfssel = 0; + spi_x->i2sctrl_bit.stdsel = 0; + } + + /* i2s data_channel_format set*/ + if(i2s_init_struct->data_channel_format == I2S_DATA_16BIT_CHANNEL_16BIT) + { + spi_x->i2sctrl_bit.i2scbn = 0; + spi_x->i2sctrl_bit.i2sdbn = 0; + } + else if(i2s_init_struct->data_channel_format == I2S_DATA_16BIT_CHANNEL_32BIT) + { + spi_x->i2sctrl_bit.i2scbn = 1; + spi_x->i2sctrl_bit.i2sdbn = 0; + } + else if(i2s_init_struct->data_channel_format == I2S_DATA_24BIT_CHANNEL_32BIT) + { + spi_x->i2sctrl_bit.i2scbn = 1; + spi_x->i2sctrl_bit.i2sdbn = 1; + } + else if(i2s_init_struct->data_channel_format == I2S_DATA_32BIT_CHANNEL_32BIT) + { + spi_x->i2sctrl_bit.i2scbn = 1; + spi_x->i2sctrl_bit.i2sdbn = 2; + } + + spi_x->i2sctrl_bit.i2sclkpol = i2s_init_struct->clock_polarity; + spi_x->i2sclk_bit.i2smclkoe = i2s_init_struct->mclk_output_enable; + spi_x->i2sctrl_bit.opersel = i2s_init_struct->operation_mode; + spi_x->i2sctrl_bit.i2smsel = TRUE; +} + +/** + * @brief enable or disable i2s. + * @param spi_x: select the i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param new_state: new state of i2s. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void i2s_enable(spi_type* spi_x, confirm_state new_state) +{ + spi_x->i2sctrl_bit.i2sen = new_state; +} + +/** + * @brief enable or disable the specified spi/i2s interrupts. + * @param spi_x: select the spi/i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param spi_i2s_int: specifies the spi/i2s interrupt sources to be enabled or disabled. + * this parameter can be one of the following values: + * - SPI_I2S_ERROR_INT + * - SPI_I2S_RDBF_INT + * - SPI_I2S_TDBE_INT + * @param new_state: new state of the specified spi/i2s interrupts. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void spi_i2s_interrupt_enable(spi_type* spi_x, uint32_t spi_i2s_int, confirm_state new_state) +{ + if(new_state != FALSE) + { + spi_x->ctrl2 |= spi_i2s_int; + } + else + { + spi_x->ctrl2 &= ~spi_i2s_int; + } +} + +/** + * @brief enable or disable the spi/i2s dma transmitter mode. + * @param spi_x: select the spi/i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param new_state: new state of the dma request. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void spi_i2s_dma_transmitter_enable(spi_type* spi_x, confirm_state new_state) +{ + spi_x->ctrl2_bit.dmaten = new_state; +} + +/** + * @brief enable or disable the spi/i2s dma receiver mode. + * @param spi_x: select the spi/i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param new_state: new state of the dma request. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void spi_i2s_dma_receiver_enable(spi_type* spi_x, confirm_state new_state) +{ + spi_x->ctrl2_bit.dmaren = new_state; +} + +/** + * @brief spi/i2s data transmit + * @param spi_x: select the spi/i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param tx_data: the data to be transmit. + * this parameter can be: + * - (0x0000~0xFFFF) + * @retval none + */ +void spi_i2s_data_transmit(spi_type* spi_x, uint16_t tx_data) +{ + spi_x->dt = tx_data; +} + +/** + * @brief spi/i2s data receive + * @param spi_x: select the spi/i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @retval the received data value + */ +uint16_t spi_i2s_data_receive(spi_type* spi_x) +{ + return (uint16_t)spi_x->dt; +} + +/** + * @brief get flag of the specified spi/i2s peripheral. + * @param spi_x: select the spi/i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param spi_i2s_flag: select the spi/i2s flag + * this parameter can be one of the following values: + * - SPI_I2S_RDBF_FLAG + * - SPI_I2S_TDBE_FLAG + * - I2S_ACS_FLAG (this flag only use in i2s mode) + * - I2S_TUERR_FLAG (this flag only use in i2s mode) + * - SPI_CCERR_FLAG (this flag only use in spi mode) + * - SPI_MMERR_FLAG (this flag only use in spi mode) + * - SPI_I2S_ROERR_FLAG + * - SPI_I2S_BF_FLAG + * - SPI_CSPAS_FLAG + * @retval the new state of spi/i2s flag + */ +flag_status spi_i2s_flag_get(spi_type* spi_x, uint32_t spi_i2s_flag) +{ + flag_status status = RESET; + if ((spi_x->sts & spi_i2s_flag) == RESET) + { + status = RESET; + } + else + { + status = SET; + } + return status; +} + +/** + * @brief get interrupt flag of the specified spi/i2s peripheral. + * @param spi_x: select the spi/i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param spi_i2s_flag: select the spi/i2s flag + * this parameter can be one of the following values: + * - SPI_I2S_RDBF_FLAG + * - SPI_I2S_TDBE_FLAG + * - I2S_TUERR_FLAG (this flag only use in i2s mode) + * - SPI_CCERR_FLAG (this flag only use in spi mode) + * - SPI_MMERR_FLAG (this flag only use in spi mode) + * - SPI_I2S_ROERR_FLAG + * - SPI_CSPAS_FLAG + * @retval the new state of spi/i2s flag + */ +flag_status spi_i2s_interrupt_flag_get(spi_type* spi_x, uint32_t spi_i2s_flag) +{ + flag_status status = RESET; + + switch(spi_i2s_flag) + { + case SPI_I2S_RDBF_FLAG: + if(spi_x->sts_bit.rdbf && spi_x->ctrl2_bit.rdbfie) + { + status = SET; + } + break; + case SPI_I2S_TDBE_FLAG: + if(spi_x->sts_bit.tdbe && spi_x->ctrl2_bit.tdbeie) + { + status = SET; + } + break; + case I2S_TUERR_FLAG: + if(spi_x->sts_bit.tuerr && spi_x->ctrl2_bit.errie) + { + status = SET; + } + break; + case SPI_CCERR_FLAG: + if(spi_x->sts_bit.ccerr && spi_x->ctrl2_bit.errie) + { + status = SET; + } + break; + case SPI_MMERR_FLAG: + if(spi_x->sts_bit.mmerr && spi_x->ctrl2_bit.errie) + { + status = SET; + } + break; + case SPI_I2S_ROERR_FLAG: + if(spi_x->sts_bit.roerr && spi_x->ctrl2_bit.errie) + { + status = SET; + } + break; + case SPI_CSPAS_FLAG: + if(spi_x->sts_bit.cspas && spi_x->ctrl2_bit.errie) + { + status = SET; + } + break; + default: + break; + }; + return status; +} + +/** + * @brief clear flag of the specified spi/i2s peripheral. + * @param spi_x: select the spi/i2s peripheral. + * this parameter can be one of the following values: + * SPI1, SPI2, SPI3 ,SPI4 , I2S2EXT, I2S3EXT + * @param spi_i2s_flag: select the spi/i2s flag + * this parameter can be one of the following values: + * - SPI_CCERR_FLAG + * - SPI_I2S_RDBF_FLAG + * - I2S_TUERR_FLAG + * - SPI_MMERR_FLAG + * - SPI_I2S_ROERR_FLAG + * - SPI_CSPAS_FLAG + * @note + * SPI_I2S_TDBE_FLAG this flag is cleared when the tx buffer already contain data to be transmit. + * I2S_ACS_FLAG this flag cann't cleared by software,the flag indicate the channel side(not use in pcm standard mode). + * SPI_I2S_BF_FLAG this flag cann't cleared by software, it's set and cleared by hardware. + * @retval none + */ +void spi_i2s_flag_clear(spi_type* spi_x, uint32_t spi_i2s_flag) +{ + if(spi_i2s_flag == SPI_CCERR_FLAG) + spi_x->sts = ~SPI_CCERR_FLAG; + else if(spi_i2s_flag == SPI_I2S_RDBF_FLAG) + UNUSED(spi_x->dt); + else if(spi_i2s_flag == I2S_TUERR_FLAG) + UNUSED(spi_x->sts); + else if(spi_i2s_flag == SPI_CSPAS_FLAG) + UNUSED(spi_x->sts); + else if(spi_i2s_flag == SPI_MMERR_FLAG) + { + UNUSED(spi_x->sts); + spi_x->ctrl1 = spi_x->ctrl1; + } + else if(spi_i2s_flag == SPI_I2S_ROERR_FLAG) + { + UNUSED(spi_x->dt); + UNUSED(spi_x->sts); + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_tmr.c b/armlib/at32_sys/drivers/src/at32f435_437_tmr.c new file mode 100644 index 000000000..4ddbb408e --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_tmr.c @@ -0,0 +1,1881 @@ +/** + ************************************************************************** + * @file at32f435_437_tmr.c + * @brief contains all the functions for the tmr firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_crm.h" +#include "at32f435_437_tmr.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup TMR + * @brief TMR driver modules + * @{ + */ + +#ifdef TMR_MODULE_ENABLED + +/** @defgroup TMR_private_functions + * @{ + */ + +/** + * @brief tmr reset by crm reset register + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @retval none + */ +void tmr_reset(tmr_type *tmr_x) +{ + if(tmr_x == TMR1) + { + crm_periph_reset(CRM_TMR1_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR1_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR2) + { + crm_periph_reset(CRM_TMR2_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR2_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR3) + { + crm_periph_reset(CRM_TMR3_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR3_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR4) + { + crm_periph_reset(CRM_TMR4_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR4_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR5) + { + crm_periph_reset(CRM_TMR5_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR5_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR6) + { + crm_periph_reset(CRM_TMR6_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR6_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR7) + { + crm_periph_reset(CRM_TMR7_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR7_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR8) + { + crm_periph_reset(CRM_TMR8_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR8_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR9) + { + crm_periph_reset(CRM_TMR9_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR9_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR10) + { + crm_periph_reset(CRM_TMR10_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR10_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR11) + { + crm_periph_reset(CRM_TMR11_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR11_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR12) + { + crm_periph_reset(CRM_TMR12_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR12_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR13) + { + crm_periph_reset(CRM_TMR13_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR13_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR14) + { + crm_periph_reset(CRM_TMR14_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR14_PERIPH_RESET, FALSE); + } + else if(tmr_x == TMR20) + { + crm_periph_reset(CRM_TMR20_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_TMR20_PERIPH_RESET, FALSE); + } +} + +/** + * @brief enable or disable tmr counter + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_counter_enable(tmr_type *tmr_x, confirm_state new_state) +{ + /* tmr counter enable */ + tmr_x->ctrl1_bit.tmren = new_state; +} + +/** + * @brief init tmr output default para + * @param tmr_output_struct + * - to the structure of tmr_output_config_type + * @retval none + */ +void tmr_output_default_para_init(tmr_output_config_type *tmr_output_struct) +{ + tmr_output_struct->oc_mode = TMR_OUTPUT_CONTROL_OFF; + tmr_output_struct->oc_idle_state = FALSE; + tmr_output_struct->occ_idle_state = FALSE; + tmr_output_struct->oc_polarity = TMR_OUTPUT_ACTIVE_HIGH; + tmr_output_struct->occ_polarity = TMR_OUTPUT_ACTIVE_HIGH; + tmr_output_struct->oc_output_state = FALSE; + tmr_output_struct->occ_output_state = FALSE; +} + +/** + * @brief init tmr input default para + * @param tmr_input_struct + * - to the structure of tmr_input_config_type + * @retval none + */ +void tmr_input_default_para_init(tmr_input_config_type *tmr_input_struct) +{ + tmr_input_struct->input_channel_select = TMR_SELECT_CHANNEL_1; + tmr_input_struct->input_polarity_select = TMR_INPUT_RISING_EDGE; + tmr_input_struct->input_mapped_select = TMR_CC_CHANNEL_MAPPED_DIRECT; + tmr_input_struct->input_filter_value = 0x0; +} + +/** + * @brief init tmr brkdt default para + * @param tmr_brkdt_struct + * - to the structure of tmr_brkdt_config_type + * @retval none + */ +void tmr_brkdt_default_para_init(tmr_brkdt_config_type *tmr_brkdt_struct) +{ + tmr_brkdt_struct->deadtime = 0x0; + tmr_brkdt_struct->brk_polarity = TMR_BRK_INPUT_ACTIVE_LOW; + tmr_brkdt_struct->wp_level = TMR_WP_OFF; + tmr_brkdt_struct->auto_output_enable = FALSE ; + tmr_brkdt_struct->fcsoen_state = FALSE ; + tmr_brkdt_struct->fcsodis_state = FALSE ; + tmr_brkdt_struct->brk_enable = FALSE ; +} + +/** + * @brief init tmr base + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_pr (for 16 bit tmr 0x0000~0xFFFF, + * for 32 bit tmr 0x0000_0000~0xFFFF_FFFF) + * @param tmr_div (timer div value:0x0000~0xFFFF) + * @retval none + */ +void tmr_base_init(tmr_type* tmr_x, uint32_t tmr_pr, uint32_t tmr_div) +{ + /* set the pr value */ + tmr_x->pr = tmr_pr; + + /* set the div value */ + tmr_x->div = tmr_div; + + /* trigger the overflow event to immediately reload pr value and div value */ + tmr_x->swevt_bit.ovfswtr = TRUE; +} + +/** + * @brief set tmr clock source division + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_clock_div + * this parameter can be one of the following values: + * - TMR_CLOCK_DIV1 + * - TMR_CLOCK_DIV2 + * - TMR_CLOCK_DIV4 + * @retval none + */ +void tmr_clock_source_div_set(tmr_type *tmr_x, tmr_clock_division_type tmr_clock_div) +{ + /* set tmr clock source division */ + tmr_x->ctrl1_bit.clkdiv = tmr_clock_div; +} + +/** + * @brief set tmr counter count direction + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_cnt_dir + * this parameter can be one of the following values: + * - TMR_COUNT_UP + * - TMR_COUNT_DOWN + * - TMR_COUNT_TWO_WAY_1 + * - TMR_COUNT_TWO_WAY_2 + * - TMR_COUNT_TWO_WAY_3 + * @retval none + */ +void tmr_cnt_dir_set(tmr_type *tmr_x, tmr_count_mode_type tmr_cnt_dir) +{ + /* set the cnt direct */ + tmr_x->ctrl1_bit.cnt_dir = tmr_cnt_dir; +} + +/** + * @brief set the repetition counter register(rpr) value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR8, TMR20 + * @param tmr_rpr_value (0x0000~0xFFFF) + * @retval none + */ +void tmr_repetition_counter_set(tmr_type *tmr_x, uint16_t tmr_rpr_value) +{ + /* set the repetition counter value */ + tmr_x->rpr_bit.rpr = tmr_rpr_value; +} + +/** + * @brief set tmr counter value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_cnt_value (for 16 bit tmr 0x0000~0xFFFF, + * for 32 bit tmr 0x0000_0000~0xFFFF_FFFF) + * @retval none + */ +void tmr_counter_value_set(tmr_type *tmr_x, uint32_t tmr_cnt_value) +{ + /* set the tmr counter value */ + tmr_x->cval = tmr_cnt_value; +} + +/** + * @brief get tmr counter value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @retval tmr counter value + */ +uint32_t tmr_counter_value_get(tmr_type *tmr_x) +{ + return tmr_x->cval; +} + +/** + * @brief set tmr div value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_div_value (0x0000~0xFFFF) + * @retval none + */ +void tmr_div_value_set(tmr_type *tmr_x, uint32_t tmr_div_value) +{ + /* set the tmr div value */ + tmr_x->div = tmr_div_value; +} + +/** + * @brief get tmr div value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @retval tmr div value + */ +uint32_t tmr_div_value_get(tmr_type *tmr_x) +{ + return tmr_x->div; +} + +/** + * @brief config tmr output channel + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_5 + * @param tmr_output_struct + * - to the structure of tmr_output_config_type + * @retval none + */ +void tmr_output_channel_config(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_output_config_type *tmr_output_struct) +{ + uint16_t channel_index = 0, channel_c_index = 0, channel = 0, chx_offset, chcx_offset; + + chx_offset = (8 + tmr_channel); + chcx_offset = (9 + tmr_channel); + + /* get channel idle state bit position in ctrl2 register */ + channel_index = (uint16_t)(tmr_output_struct->oc_idle_state << chx_offset); + + /* get channel complementary idle state bit position in ctrl2 register */ + channel_c_index = (uint16_t)(tmr_output_struct->occ_idle_state << chcx_offset); + + /* set output channel complementary idle state */ + tmr_x->ctrl2 &= ~(1<ctrl2 |= channel_c_index; + + /* set output channel idle state */ + tmr_x->ctrl2 &= ~(1<ctrl2 |= channel_index; + + /* set channel output mode */ + channel = tmr_channel; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cm1_output_bit.c1octrl = tmr_output_struct->oc_mode; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cm1_output_bit.c2octrl = tmr_output_struct->oc_mode; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cm2_output_bit.c3octrl = tmr_output_struct->oc_mode; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cm2_output_bit.c4octrl = tmr_output_struct->oc_mode; + break; + + case TMR_SELECT_CHANNEL_5: + tmr_x->cm3_output_bit.c5octrl = tmr_output_struct->oc_mode; + break; + + default: + break; + } + + chx_offset = ((tmr_channel * 2) + 1); + chcx_offset = ((tmr_channel * 2) + 3); + + /* get channel polarity bit position in cctrl register */ + channel_index = (uint16_t)(tmr_output_struct->oc_polarity << chx_offset); + + /* get channel complementary polarity bit position in cctrl register */ + channel_c_index = (uint16_t)(tmr_output_struct->occ_polarity << chcx_offset); + + /* set output channel complementary polarity */ + tmr_x->cctrl &= ~(1<cctrl |= channel_c_index; + + /* set output channel polarity */ + tmr_x->cctrl &= ~(1<cctrl |= channel_index; + + chx_offset = (tmr_channel * 2); + chcx_offset = ((tmr_channel * 2) + 2); + + /* get channel enable bit position in cctrl register */ + channel_index = (uint16_t)(tmr_output_struct->oc_output_state << (tmr_channel * 2)); + + /* get channel complementary enable bit position in cctrl register */ + channel_c_index = (uint16_t)(tmr_output_struct->occ_output_state << ((tmr_channel * 2) + 2)); + + /* set output channel complementary enable bit */ + tmr_x->cctrl &= ~(1<cctrl |= channel_c_index; + + /* set output channel enable bit */ + tmr_x->cctrl &= ~(1<cctrl |= channel_index; +} + +/** + * @brief select tmr output channel mode + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_5 + * @param oc_mode + * this parameter can be one of the following values: + * - TMR_OUTPUT_CONTROL_OFF + * - TMR_OUTPUT_CONTROL_HIGH + * - TMR_OUTPUT_CONTROL_LOW + * - TMR_OUTPUT_CONTROL_SWITCH + * - TMR_OUTPUT_CONTROL_FORCE_HIGH + * - TMR_OUTPUT_CONTROL_FORCE_LOW + * - TMR_OUTPUT_CONTROL_PWM_MODE_A + * - TMR_OUTPUT_CONTROL_PWM_MODE_B + * @retval none + */ +void tmr_output_channel_mode_select(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_output_control_mode_type oc_mode) +{ + uint16_t channel; + + channel = tmr_channel; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cm1_output_bit.c1octrl = oc_mode; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cm1_output_bit.c2octrl = oc_mode; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cm2_output_bit.c3octrl = oc_mode; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cm2_output_bit.c4octrl = oc_mode; + break; + + case TMR_SELECT_CHANNEL_5: + tmr_x->cm3_output_bit.c5octrl = oc_mode; + break; + + default: + break; + } +} +/** + * @brief set tmr period value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_pr_value: timer period register value of counter + * (for 16 bit tmr 0x0000~0xFFFF, + * for 32 bit tmr 0x0000_0000~0xFFFF_FFFF) + * @retval none + */ +void tmr_period_value_set(tmr_type *tmr_x, uint32_t tmr_pr_value) +{ + /* set tmr period value */ + tmr_x->pr = tmr_pr_value; +} + +/** + * @brief get tmr period value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @retval timer period register value of counter + * (for 16 bit tmr 0x0000~0xFFFF, for 32 bit tmr + * 0x0000_0000~0xFFFF_FFFF) + */ +uint32_t tmr_period_value_get(tmr_type *tmr_x) +{ + return tmr_x->pr; +} + +/** + * @brief set tmr channel value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_5 + * @param tmr_channel_value (for 16 bit tmr 0x0000~0xFFFF, + * for 32 bit tmr 0x0000_0000~0xFFFF_FFFF) + * @retval none + */ +void tmr_channel_value_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + uint32_t tmr_channel_value) +{ + uint16_t channel; + + channel = tmr_channel; + + /* set tmr channel value */ + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->c1dt = tmr_channel_value; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->c2dt = tmr_channel_value; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->c3dt = tmr_channel_value; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->c4dt = tmr_channel_value; + break; + + case TMR_SELECT_CHANNEL_5: + tmr_x->c5dt = tmr_channel_value; + break; + + default: + break; + } +} + +/** + * @brief get tmr channel value + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_5 + * @retval tmr channel value + */ +uint32_t tmr_channel_value_get(tmr_type *tmr_x, tmr_channel_select_type tmr_channel) +{ + uint32_t cc_value_get = 0; + uint16_t channel; + + channel = tmr_channel; + + /* get tmr channel value */ + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + cc_value_get = tmr_x->c1dt; + break; + + case TMR_SELECT_CHANNEL_2: + cc_value_get = tmr_x->c2dt; + break; + + case TMR_SELECT_CHANNEL_3: + cc_value_get = tmr_x->c3dt; + break; + + case TMR_SELECT_CHANNEL_4: + cc_value_get = tmr_x->c4dt; + break; + + case TMR_SELECT_CHANNEL_5: + cc_value_get = tmr_x->c5dt; + break; + + default: + break; + } + + return cc_value_get; +} +/** + * @brief set tmr period buffer + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_period_buffer_enable(tmr_type *tmr_x, confirm_state new_state) +{ + /* tmr period buffer set */ + tmr_x->ctrl1_bit.prben = new_state; +} + +/** + * @brief set tmr output channel buffer + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_5 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_output_channel_buffer_enable(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + confirm_state new_state) +{ + uint16_t channel; + + channel = tmr_channel; + + /* get tmr channel value */ + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cm1_output_bit.c1oben = new_state; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cm1_output_bit.c2oben = new_state; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cm2_output_bit.c3oben = new_state; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cm2_output_bit.c4oben = new_state; + break; + + case TMR_SELECT_CHANNEL_5: + tmr_x->cm3_output_bit.c5oben = new_state; + break; + + default: + break; + } +} + +/** + * @brief set tmr output channel immediately + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_5 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_output_channel_immediately_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + confirm_state new_state) +{ + uint16_t channel; + + channel = tmr_channel; + + /* get tmr channel value */ + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cm1_output_bit.c1oien = new_state; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cm1_output_bit.c2oien = new_state; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cm2_output_bit.c3oien = new_state; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cm2_output_bit.c4oien = new_state; + break; + + case TMR_SELECT_CHANNEL_5: + tmr_x->cm3_output_bit.c5oien = new_state; + break; + + default: + break; + } +} + +/** + * @brief set tmr output channel switch + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_5 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_output_channel_switch_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + confirm_state new_state) +{ + uint16_t channel; + + channel = tmr_channel; + + /* get tmr channel value */ + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cm1_output_bit.c1osen = new_state; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cm1_output_bit.c2osen = new_state; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cm2_output_bit.c3osen = new_state; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cm2_output_bit.c4osen = new_state; + break; + + case TMR_SELECT_CHANNEL_5: + tmr_x->cm3_output_bit.c5osen = new_state; + break; + + default: + break; + } +} + +/** + * @brief enable or disable tmr one cycle mode + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, TMR9, TMR12, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_one_cycle_mode_enable(tmr_type *tmr_x, confirm_state new_state) +{ + /* tmr one cycle mode enable */ + tmr_x->ctrl1_bit.ocmen = new_state; +} + +/** + * @brief enable or disable tmr 32 bit function(plus mode) + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR2, TMR5 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_32_bit_function_enable (tmr_type *tmr_x, confirm_state new_state) +{ + /* tmr 32 bit function(plus mode) enable,only for TMR2/TMR5 */ + if((tmr_x == TMR2) || (tmr_x == TMR5)) + { + tmr_x->ctrl1_bit.pmen = new_state; + } +} + +/** + * @brief select tmr the overflow event sources + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_overflow_request_source_set(tmr_type *tmr_x, confirm_state new_state) +{ + tmr_x->ctrl1_bit.ovfs = new_state; +} + +/** + * @brief enable or disable tmr overflow event generation + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_overflow_event_disable(tmr_type *tmr_x, confirm_state new_state) +{ + tmr_x->ctrl1_bit.ovfen = new_state; +} + +/** + * @brief init tmr input channel + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param input_struct + * - to the structure of tmr_input_config_type + * @param divider_factor + * this parameter can be one of the following values: + * - TMR_CHANNEL_INPUT_DIV_1 + * - TMR_CHANNEL_INPUT_DIV_2 + * - TMR_CHANNEL_INPUT_DIV_4 + * - TMR_CHANNEL_INPUT_DIV_8 + * @retval none + */ +void tmr_input_channel_init(tmr_type *tmr_x, tmr_input_config_type *input_struct, \ + tmr_channel_input_divider_type divider_factor) +{ + uint16_t channel = 0; + + /* get channel selected */ + channel = input_struct->input_channel_select; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cctrl_bit.c1en = FALSE; + tmr_x->cctrl_bit.c1p = (uint32_t)input_struct->input_polarity_select; + tmr_x->cctrl_bit.c1cp = (input_struct->input_polarity_select & 0x2) >> 1; + tmr_x->cm1_input_bit.c1c = input_struct->input_mapped_select; + tmr_x->cm1_input_bit.c1df = input_struct->input_filter_value; + tmr_x->cm1_input_bit.c1idiv = divider_factor; + tmr_x->cctrl_bit.c1en = TRUE; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cctrl_bit.c2en = FALSE; + tmr_x->cctrl_bit.c2p = (uint32_t)input_struct->input_polarity_select; + tmr_x->cctrl_bit.c2cp = (input_struct->input_polarity_select & 0x2) >> 1; + tmr_x->cm1_input_bit.c2c = input_struct->input_mapped_select; + tmr_x->cm1_input_bit.c2df = input_struct->input_filter_value; + tmr_x->cm1_input_bit.c2idiv = divider_factor; + tmr_x->cctrl_bit.c2en = TRUE; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cctrl_bit.c3en = FALSE; + tmr_x->cctrl_bit.c3p = (uint32_t)input_struct->input_polarity_select; + tmr_x->cctrl_bit.c3cp = (input_struct->input_polarity_select & 0x2) >> 1; + tmr_x->cm2_input_bit.c3c = input_struct->input_mapped_select; + tmr_x->cm2_input_bit.c3df = input_struct->input_filter_value; + tmr_x->cm2_input_bit.c3idiv = divider_factor; + tmr_x->cctrl_bit.c3en = TRUE; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cctrl_bit.c4en = FALSE; + tmr_x->cctrl_bit.c4p = (uint32_t)input_struct->input_polarity_select; + tmr_x->cm2_input_bit.c4c = input_struct->input_mapped_select; + tmr_x->cm2_input_bit.c4df = input_struct->input_filter_value; + tmr_x->cm2_input_bit.c4idiv = divider_factor; + tmr_x->cctrl_bit.c4en = TRUE; + break; + + default: + break; + } +} + +/** + * @brief tmr channel enable + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_1C + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_2C + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_3C + * - TMR_SELECT_CHANNEL_4 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_channel_enable(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, confirm_state new_state) +{ + uint16_t channel; + + channel = tmr_channel; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cctrl_bit.c1en = new_state; + break; + + case TMR_SELECT_CHANNEL_1C: + tmr_x->cctrl_bit.c1cen = new_state; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cctrl_bit.c2en = new_state; + break; + + case TMR_SELECT_CHANNEL_2C: + tmr_x->cctrl_bit.c2cen = new_state; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cctrl_bit.c3en = new_state; + break; + + case TMR_SELECT_CHANNEL_3C: + tmr_x->cctrl_bit.c3cen = new_state; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cctrl_bit.c4en = new_state; + break; + + default: + break; + } +} + +/** + * @brief set tmr input channel filter + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * @param filter_value (0x0~0xf) + * @retval none + */ +void tmr_input_channel_filter_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + uint16_t filter_value) +{ + uint16_t channel; + + channel = tmr_channel; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cm1_input_bit.c1df = filter_value; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cm1_input_bit.c2df = filter_value; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cm2_input_bit.c3df = filter_value; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cm2_input_bit.c4df = filter_value; + break; + + default: + break; + } +} + +/** + * @brief config tmr pwm input + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param input_struct + * - to the structure of tmr_input_config_type + * @param divider_factor + * this parameter can be one of the following values: + * - TMR_CHANNEL_INPUT_DIV_1 + * - TMR_CHANNEL_INPUT_DIV_2 + * - TMR_CHANNEL_INPUT_DIV_4 + * - TMR_CHANNEL_INPUT_DIV_8 + * @retval none + */ +void tmr_pwm_input_config(tmr_type *tmr_x, tmr_input_config_type *input_struct, \ + tmr_channel_input_divider_type divider_factor) +{ + uint16_t channel = 0; + + /* get channel selected */ + channel = input_struct->input_channel_select; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + if(input_struct->input_polarity_select == TMR_INPUT_RISING_EDGE) + { + /* set channel polarity */ + tmr_x->cctrl_bit.c1p = TMR_INPUT_RISING_EDGE; + tmr_x->cctrl_bit.c2p = TMR_INPUT_FALLING_EDGE; + } + else if(input_struct->input_polarity_select == TMR_INPUT_FALLING_EDGE) + { + /* set channel polarity */ + tmr_x->cctrl_bit.c1p = TMR_INPUT_FALLING_EDGE; + tmr_x->cctrl_bit.c2p = TMR_INPUT_RISING_EDGE; + } + + if(input_struct->input_mapped_select == TMR_CC_CHANNEL_MAPPED_DIRECT) + { + /* ic1 is mapped on ti1 */ + tmr_x->cm1_input_bit.c1c = TMR_CC_CHANNEL_MAPPED_DIRECT; + + /* ic1 is mapped on ti2 */ + tmr_x->cm1_input_bit.c2c = TMR_CC_CHANNEL_MAPPED_INDIRECT; + } + else if(input_struct->input_mapped_select == TMR_CC_CHANNEL_MAPPED_INDIRECT) + { + /* ic1 is mapped on ti1 */ + tmr_x->cm1_input_bit.c1c = TMR_CC_CHANNEL_MAPPED_INDIRECT; + + /* ic1 is mapped on ti2 */ + tmr_x->cm1_input_bit.c2c = TMR_CC_CHANNEL_MAPPED_DIRECT; + } + + /* set input ch1 and ch2 filter value*/ + tmr_x->cm1_input_bit.c1df = input_struct->input_filter_value; + tmr_x->cm1_input_bit.c2df = input_struct->input_filter_value; + + /*set input ch1 and ch2 divider value*/ + tmr_x->cm1_input_bit.c1idiv = divider_factor; + tmr_x->cm1_input_bit.c2idiv = divider_factor; + + tmr_x->cctrl_bit.c1en = TRUE; + tmr_x->cctrl_bit.c2en = TRUE; + break; + + case TMR_SELECT_CHANNEL_2: + if(input_struct->input_polarity_select == TMR_INPUT_RISING_EDGE) + { + /* set channel polarity */ + tmr_x->cctrl_bit.c2p = TMR_INPUT_RISING_EDGE; + tmr_x->cctrl_bit.c1p = TMR_INPUT_FALLING_EDGE; + } + else if(input_struct->input_polarity_select == TMR_INPUT_FALLING_EDGE) + { + /* set channel polarity */ + tmr_x->cctrl_bit.c2p = TMR_INPUT_FALLING_EDGE; + tmr_x->cctrl_bit.c1p = TMR_INPUT_RISING_EDGE; + } + + if(input_struct->input_mapped_select == TMR_CC_CHANNEL_MAPPED_DIRECT) + { + /* set mapped direct */ + tmr_x->cm1_input_bit.c2c = TMR_CC_CHANNEL_MAPPED_DIRECT; + tmr_x->cm1_input_bit.c1c = TMR_CC_CHANNEL_MAPPED_INDIRECT; + } + else if(input_struct->input_mapped_select == TMR_CC_CHANNEL_MAPPED_INDIRECT) + { + /* set mapped direct */ + tmr_x->cm1_input_bit.c2c = TMR_CC_CHANNEL_MAPPED_INDIRECT; + tmr_x->cm1_input_bit.c1c = TMR_CC_CHANNEL_MAPPED_DIRECT; + } + + /* set input ch1 and ch2 filter value*/ + tmr_x->cm1_input_bit.c1df = input_struct->input_filter_value; + tmr_x->cm1_input_bit.c2df = input_struct->input_filter_value; + + /*set input ch1 and ch2 divider value*/ + tmr_x->cm1_input_bit.c1idiv = divider_factor; + tmr_x->cm1_input_bit.c2idiv = divider_factor; + + tmr_x->cctrl_bit.c1en = TRUE; + tmr_x->cctrl_bit.c2en = TRUE; + break; + + default: + break; + } +} + +/** + * @brief select tmr channel1 input + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR20 + * @param ch1_connect + * this parameter can be one of the following values: + * - TMR_CHANEL1_CONNECTED_C1IRAW + * - TMR_CHANEL1_2_3_CONNECTED_C1IRAW_XOR + * @retval none + */ +void tmr_channel1_input_select(tmr_type *tmr_x, tmr_channel1_input_connected_type ch1_connect) +{ + tmr_x->ctrl2_bit.c1insel = ch1_connect; +} + +/** + * @brief set tmr input channel divider + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * @param divider_factor + * this parameter can be one of the following values: + * - TMR_CHANNEL_INPUT_DIV_1 + * - TMR_CHANNEL_INPUT_DIV_2 + * - TMR_CHANNEL_INPUT_DIV_4 + * - TMR_CHANNEL_INPUT_DIV_8 + * @retval none + */ +void tmr_input_channel_divider_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_channel_input_divider_type divider_factor) +{ + uint16_t channel; + + channel = tmr_channel; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cm1_input_bit.c1idiv = divider_factor; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cm1_input_bit.c2idiv = divider_factor; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cm2_input_bit.c3idiv = divider_factor; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cm2_input_bit.c4idiv = divider_factor; + break; + + default: + break; + } +} + +/** + * @brief select tmr primary mode + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, TMR20 + * @param primary_mode + * this parameter can be one of the following values: + * - TMR_PRIMARY_SEL_RESET + * - TMR_PRIMARY_SEL_ENABLE + * - TMR_PRIMARY_SEL_OVERFLOW + * - TMR_PRIMARY_SEL_COMPARE + * - TMR_PRIMARY_SEL_C1ORAW + * - TMR_PRIMARY_SEL_C2ORAW + * - TMR_PRIMARY_SEL_C3ORAW + * - TMR_PRIMARY_SEL_C4ORAW + * @retval none + */ +void tmr_primary_mode_select(tmr_type *tmr_x, tmr_primary_select_type primary_mode) +{ + tmr_x->ctrl2_bit.ptos = primary_mode; +} + +/** + * @brief select tmr subordinate mode + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR12, TMR20 + * @param sub_mode + * this parameter can be one of the following values: + * - TMR_SUB_MODE_DIABLE + * - TMR_SUB_ENCODER_MODE_A + * - TMR_SUB_ENCODER_MODE_B + * - TMR_SUB_ENCODER_MODE_C + * - TMR_SUB_RESET_MODE + * - TMR_SUB_HANG_MODE + * - TMR_SUB_TRIGGER_MODE + * - TMR_SUB_EXTERNAL_CLOCK_MODE_A + + * @retval none + */ +void tmr_sub_mode_select(tmr_type *tmr_x, tmr_sub_mode_select_type sub_mode) +{ + tmr_x->stctrl_bit.smsel = sub_mode; +} + +/** + * @brief select tmr channel dma + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR12, TMR20 + * @param cc_dma_select + * this parameter can be one of the following values: + * - TMR_DMA_REQUEST_BY_CHANNEL + * - TMR_DMA_REQUEST_BY_OVERFLOW + * @retval none + */ +void tmr_channel_dma_select(tmr_type *tmr_x, tmr_dma_request_source_type cc_dma_select) +{ + tmr_x->ctrl2_bit.drs = cc_dma_select; +} + +/** + * @brief select tmr hall + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR8, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_hall_select(tmr_type *tmr_x, confirm_state new_state) +{ + tmr_x->ctrl2_bit.ccfs = new_state; +} + +/** + * @brief select tmr channel buffer + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR8, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_channel_buffer_enable(tmr_type *tmr_x, confirm_state new_state) +{ + tmr_x->ctrl2_bit.cbctrl = new_state; +} + +/** + * @brief select tmr trgout2 + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR8, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_trgout2_enable(tmr_type *tmr_x, confirm_state new_state) +{ + tmr_x->ctrl2_bit.trgout2en = new_state; +} + +/** + * @brief select tmr sub-trigger + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR12, TMR20 + * @param trigger_select + * this parameter can be one of the following values: + * - TMR_SUB_INPUT_SEL_IS0 + * - TMR_SUB_INPUT_SEL_IS1 + * - TMR_SUB_INPUT_SEL_IS2 + * - TMR_SUB_INPUT_SEL_IS3 + * - TMR_SUB_INPUT_SEL_C1INC + * - TMR_SUB_INPUT_SEL_C1DF1 + * - TMR_SUB_INPUT_SEL_C2DF2 + * - TMR_SUB_INPUT_SEL_EXTIN + * @retval none + */ +void tmr_trigger_input_select(tmr_type *tmr_x, sub_tmr_input_sel_type trigger_select) +{ + tmr_x->stctrl_bit.stis = trigger_select; +} + +/** + * @brief set tmr subordinate synchronization mode + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR12, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_sub_sync_mode_set(tmr_type *tmr_x, confirm_state new_state) +{ + tmr_x->stctrl_bit.sts = new_state; +} + +/** + * @brief enable or disable tmr dma request + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param dma_request + * this parameter can be one of the following values: + * - TMR_OVERFLOW_DMA_REQUEST + * - TMR_C1_DMA_REQUEST + * - TMR_C2_DMA_REQUEST + * - TMR_C3_DMA_REQUEST + * - TMR_C4_DMA_REQUEST + * - TMR_HALL_DMA_REQUEST + * - TMR_TRIGGER_DMA_REQUEST + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_dma_request_enable(tmr_type *tmr_x, tmr_dma_request_type dma_request, confirm_state new_state) +{ + if(new_state == TRUE) + { + tmr_x->iden |= dma_request; + } + else if(new_state == FALSE) + { + tmr_x->iden &= ~dma_request; + } +} + +/** + * @brief enable or disable tmr interrupt + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_interrupt + * this parameter can be one of the following values: + * - TMR_OVF_INT + * - TMR_C1_INT + * - TMR_C2_INT + * - TMR_C3_INT + * - TMR_C4_INT + * - TMR_HALL_INT + * - TMR_TRIGGER_INT + * - TMR_BRK_INT + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_interrupt_enable(tmr_type *tmr_x, uint32_t tmr_interrupt, confirm_state new_state) +{ + if(new_state == TRUE) + { + tmr_x->iden |= tmr_interrupt; + } + else if(new_state == FALSE) + { + tmr_x->iden &= ~tmr_interrupt; + } +} + +/** + * @brief get tmr interrupt flag + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_flag + * this parameter can be one of the following values: + * - TMR_OVF_FLAG + * - TMR_C1_FLAG + * - TMR_C2_FLAG + * - TMR_C3_FLAG + * - TMR_C4_FLAG + * - TMR_HALL_FLAG + * - TMR_TRIGGER_FLAG + * - TMR_BRK_FLAG + * @retval state of tmr interrupt flag + */ +flag_status tmr_interrupt_flag_get(tmr_type *tmr_x, uint32_t tmr_flag) +{ + flag_status status = RESET; + + if((tmr_x->ists & tmr_flag) && (tmr_x->iden & tmr_flag)) + { + status = SET; + } + else + { + status = RESET; + } + + return status; +} + +/** + * @brief get tmr flag + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_flag + * this parameter can be one of the following values: + * - TMR_OVF_FLAG + * - TMR_C1_FLAG + * - TMR_C2_FLAG + * - TMR_C3_FLAG + * - TMR_C4_FLAG + * - TMR_C5_FLAG + * - TMR_HALL_FLAG + * - TMR_TRIGGER_FLAG + * - TMR_BRK_FLAG + * - TMR_C1_RECAPTURE_FLAG + * - TMR_C2_RECAPTURE_FLAG + * - TMR_C3_RECAPTURE_FLAG + * - TMR_C4_RECAPTURE_FLAG + * @retval state of tmr flag + */ +flag_status tmr_flag_get(tmr_type *tmr_x, uint32_t tmr_flag) +{ + flag_status status = RESET; + + if((tmr_x->ists & tmr_flag) != RESET) + { + status = SET; + } + else + { + status = RESET; + } + + return status; +} + +/** + * @brief clear tmr flag + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_flag + * this parameter can be any combination of the following values: + * - TMR_OVF_FLAG + * - TMR_C1_FLAG + * - TMR_C2_FLAG + * - TMR_C3_FLAG + * - TMR_C4_FLAG + * - TMR_C5_FLAG + * - TMR_HALL_FLAG + * - TMR_TRIGGER_FLAG + * - TMR_BRK_FLAG + * - TMR_C1_RECAPTURE_FLAG + * - TMR_C2_RECAPTURE_FLAG + * - TMR_C3_RECAPTURE_FLAG + * - TMR_C4_RECAPTURE_FLAG + * @retval none + */ +void tmr_flag_clear(tmr_type *tmr_x, uint32_t tmr_flag) +{ + tmr_x->ists = ~tmr_flag; +} + +/** + * @brief generate tmr event + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR6, TMR7, TMR8, + * TMR9, TMR10, TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_event + * this parameter can be one of the following values: + * - TMR_OVERFLOW_SWTRIG + * - TMR_C1_SWTRIG + * - TMR_C2_SWTRIG + * - TMR_C3_SWTRIG + * - TMR_C4_SWTRIG + * - TMR_HALL_SWTRIG + * - TMR_TRIGGER_SWTRIG + * - TMR_BRK_SWTRIG + * @retval none + */ +void tmr_event_sw_trigger(tmr_type *tmr_x, tmr_event_trigger_type tmr_event) +{ + tmr_x->swevt |= tmr_event; +} + +/** + * @brief tmr output enable(oen),this function is important for advtm output enable + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR8, TMR20 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void tmr_output_enable(tmr_type *tmr_x, confirm_state new_state) +{ + tmr_x->brk_bit.oen = new_state; +} + +/** + * @brief set tmr select internal clock + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR12, TMR20 + * @retval none + */ +void tmr_internal_clock_set(tmr_type *tmr_x) +{ + tmr_x->stctrl_bit.smsel = TMR_SUB_MODE_DIABLE; +} + +/** + * @brief set tmr output channel polarity + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_1C + * - TMR_SELECT_CHANNEL_2C + * - TMR_SELECT_CHANNEL_3C + * @param oc_polarity + * this parameter can be one of the following values: + * - TMR_POLARITY_ACTIVE_HIGH + * - TMR_POLARITY_ACTIVE_LOW + * @retval none + */ +void tmr_output_channel_polarity_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_polarity_active_type oc_polarity) +{ + uint16_t channel; + + channel = tmr_channel; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cctrl_bit.c1p = (uint32_t)oc_polarity; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cctrl_bit.c2p = (uint32_t)oc_polarity; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cctrl_bit.c3p = (uint32_t)oc_polarity; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cctrl_bit.c4p = (uint32_t)oc_polarity; + break; + + case TMR_SELECT_CHANNEL_1C: + tmr_x->cctrl_bit.c1cp = (uint32_t)oc_polarity; + break; + + case TMR_SELECT_CHANNEL_2C: + tmr_x->cctrl_bit.c2cp = (uint32_t)oc_polarity; + break; + + case TMR_SELECT_CHANNEL_3C: + tmr_x->cctrl_bit.c3cp = (uint32_t)oc_polarity; + break; + + default: + break; + } +} + +/** + * @brief config tmr external clock + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR20 + * @param es_divide + * this parameter can be one of the following values: + * - TMR_ES_FREQUENCY_DIV_1 + * - TMR_ES_FREQUENCY_DIV_2 + * - TMR_ES_FREQUENCY_DIV_4 + * - TMR_ES_FREQUENCY_DIV_8 + * @param es_polarity + * this parameter can be one of the following values: + * - TMR_ES_POLARITY_NON_INVERTED + * - TMR_ES_POLARITY_INVERTED + * @param es_filter (0x0~0xf) + * @retval none + */ +void tmr_external_clock_config(tmr_type *tmr_x, tmr_external_signal_divider_type es_divide, \ + tmr_external_signal_polarity_type es_polarity, uint16_t es_filter) +{ + tmr_x->stctrl_bit.esdiv = es_divide; + tmr_x->stctrl_bit.esp = es_polarity; + tmr_x->stctrl_bit.esf = es_filter; +} + +/** + * @brief config tmr external clock mode1 + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR12, TMR20 + * @param es_divide + * this parameter can be one of the following values: + * - TMR_ES_FREQUENCY_DIV_1 + * - TMR_ES_FREQUENCY_DIV_2 + * - TMR_ES_FREQUENCY_DIV_4 + * - TMR_ES_FREQUENCY_DIV_8 + * @param es_polarity + * this parameter can be one of the following values: + * - TMR_ES_POLARITY_NON_INVERTED + * - TMR_ES_POLARITY_INVERTED + * @param es_filter (0x0~0xf) + * @retval none + */ +void tmr_external_clock_mode1_config(tmr_type *tmr_x, tmr_external_signal_divider_type es_divide, \ + tmr_external_signal_polarity_type es_polarity, uint16_t es_filter) +{ + tmr_external_clock_config(tmr_x, es_divide, es_polarity, es_filter); + tmr_x->stctrl_bit.smsel = TMR_SUB_EXTERNAL_CLOCK_MODE_A; + tmr_x->stctrl_bit.stis = TMR_SUB_INPUT_SEL_EXTIN; +} + +/** + * @brief config tmr external clock mode2 + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR20 + * @param es_divide + * this parameter can be one of the following values: + * - TMR_ES_FREQUENCY_DIV_1 + * - TMR_ES_FREQUENCY_DIV_2 + * - TMR_ES_FREQUENCY_DIV_4 + * - TMR_ES_FREQUENCY_DIV_8 + * @param es_polarity + * this parameter can be one of the following values: + * - TMR_ES_POLARITY_NON_INVERTED + * - TMR_ES_POLARITY_INVERTED + * @param es_filter (0x0~0xf) + * @retval none + */ +void tmr_external_clock_mode2_config(tmr_type *tmr_x, tmr_external_signal_divider_type es_divide, \ + tmr_external_signal_polarity_type es_polarity, uint16_t es_filter) +{ + tmr_external_clock_config(tmr_x, es_divide, es_polarity, es_filter); + tmr_x->stctrl_bit.ecmben = TRUE; +} + +/** + * @brief config tmr encoder mode + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR20 + * @param encoder_mode + * this parameter can be one of the following values: + * - TMR_ENCODER_MODE_A + * - TMR_ENCODER_MODE_B + * - TMR_ENCODER_MODE_C + * @param ic1_polarity + * this parameter can be one of the following values: + * - TMR_INPUT_RISING_EDGE + * - TMR_INPUT_FALLING_EDGE + * - TMR_INPUT_BOTH_EDGE + * @param ic2_polarity + * this parameter can be one of the following values: + * - TMR_INPUT_RISING_EDGE + * - TMR_INPUT_FALLING_EDGE + * - TMR_INPUT_BOTH_EDGE + * @retval none + */ +void tmr_encoder_mode_config(tmr_type *tmr_x, tmr_encoder_mode_type encoder_mode, tmr_input_polarity_type \ + ic1_polarity, tmr_input_polarity_type ic2_polarity) +{ + tmr_x->stctrl_bit.smsel = encoder_mode; + + /* set ic1 polarity */ + tmr_x->cctrl_bit.c1p = (ic1_polarity & 0x1); + tmr_x->cctrl_bit.c1cp = (ic1_polarity >> 1); + /* set ic1 as input channel */ + tmr_x->cm1_input_bit.c1c = TMR_CC_CHANNEL_MAPPED_DIRECT; + + /* set ic2 polarity */ + tmr_x->cctrl_bit.c2p = (ic2_polarity & 0x1); + tmr_x->cctrl_bit.c2cp = (ic2_polarity >> 1); + /* set ic2 as input channel */ + tmr_x->cm1_input_bit.c2c = TMR_CC_CHANNEL_MAPPED_DIRECT; +} + +/** + * @brief set tmr force output + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR9, TMR10, + * TMR11, TMR12, TMR13, TMR14, TMR20 + * @param tmr_channel + * this parameter can be one of the following values: + * - TMR_SELECT_CHANNEL_1 + * - TMR_SELECT_CHANNEL_2 + * - TMR_SELECT_CHANNEL_3 + * - TMR_SELECT_CHANNEL_4 + * - TMR_SELECT_CHANNEL_5 + * @param force_output + * this parameter can be one of the following values: + * - TMR_FORCE_OUTPUT_HIGH + * - TMR_FORCE_OUTPUT_LOW + * @retval none + */ +void tmr_force_output_set(tmr_type *tmr_x, tmr_channel_select_type tmr_channel, \ + tmr_force_output_type force_output) +{ + uint16_t channel; + + channel = tmr_channel; + + switch(channel) + { + case TMR_SELECT_CHANNEL_1: + tmr_x->cm1_output_bit.c1octrl = force_output; + break; + + case TMR_SELECT_CHANNEL_2: + tmr_x->cm1_output_bit.c2octrl = force_output; + break; + + case TMR_SELECT_CHANNEL_3: + tmr_x->cm2_output_bit.c3octrl = force_output; + break; + + case TMR_SELECT_CHANNEL_4: + tmr_x->cm2_output_bit.c4octrl = force_output; + break; + + case TMR_SELECT_CHANNEL_5: + tmr_x->cm3_output_bit.c5octrl = force_output; + break; + + default: + break; + } +} + +/** + * @brief config tmr dma control + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR2, TMR3, TMR4, TMR5, TMR8, TMR20 + * @param dma_length + * this parameter can be one of the following values: + * - TMR_DMA_TRANSFER_1BYTE + * - TMR_DMA_TRANSFER_2BYTES + * - TMR_DMA_TRANSFER_3BYTES + * ... + * - TMR_DMA_TRANSFER_17BYTES + * - TMR_DMA_TRANSFER_18BYTES + * @param dma_base_address + * this parameter can be one of the following values: + * - TMR_CTRL1_ADDRESS + * - TMR_CTRL2_ADDRESS + * - TMR_STCTRL_ADDRESS + * - TMR_IDEN_ADDRESS + * - TMR_ISTS_ADDRESS + * - TMR_SWEVT_ADDRESS + * - TMR_CM1_ADDRESS + * - TMR_CM2_ADDRESS + * - TMR_CCTRL_ADDRESS + * - TMR_CVAL_ADDRESS + * - TMR_DIV_ADDRESS + * - TMR_PR_ADDRESS + * - TMR_RPR_ADDRESS + * - TMR_C1DT_ADDRESS + * - TMR_C2DT_ADDRESS + * - TMR_C3DT_ADDRESS + * - TMR_C4DT_ADDRESS + * - TMR_BRK_ADDRESS + * - TMR_DMACTRL_ADDRESS + * @retval none + */ +void tmr_dma_control_config(tmr_type *tmr_x, tmr_dma_transfer_length_type dma_length, \ + tmr_dma_address_type dma_base_address) +{ + tmr_x->dmactrl_bit.dtb = dma_length; + tmr_x->dmactrl_bit.addr = dma_base_address; +} + +/** + * @brief config tmr brake mode and dead-time + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR1, TMR8, TMR20 + * @param brkdt_struct + * - to the structure of tmr_brkdt_config_type + * @retval none + */ +void tmr_brkdt_config(tmr_type *tmr_x, tmr_brkdt_config_type *brkdt_struct) +{ + tmr_x->brk_bit.brken = brkdt_struct->brk_enable; + tmr_x->brk_bit.dtc = brkdt_struct->deadtime; + tmr_x->brk_bit.fcsodis = brkdt_struct->fcsodis_state; + tmr_x->brk_bit.fcsoen = brkdt_struct->fcsoen_state; + tmr_x->brk_bit.brkv = brkdt_struct->brk_polarity; + tmr_x->brk_bit.aoen = brkdt_struct->auto_output_enable; + tmr_x->brk_bit.wpc = brkdt_struct->wp_level; +} + +/** + * @brief set tmr2/tmr5 input channel remap + * @param tmr_x: select the tmr peripheral. + * this parameter can be one of the following values: + * TMR2, TMR5 + * @param input_remap + * - TMR2_TMR8TRGOUT_TMR5_GPIO + * - TMR2_PTP_TMR5_LICK + * - TMR2_OTG1FS_TMR5_LEXT + * - TMR2_OTG2FS_TMR5_ERTC + * @retval none + */ +void tmr_iremap_config(tmr_type *tmr_x, tmr_input_remap_type input_remap) +{ + if(tmr_x == TMR2) + { + tmr_x->rmp_bit.tmr2_ch1_irmp = input_remap; + } + else if(tmr_x == TMR5) + { + tmr_x->rmp_bit.tmr5_ch4_irmp = input_remap; + } +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_usart.c b/armlib/at32_sys/drivers/src/at32f435_437_usart.c new file mode 100644 index 000000000..867da9686 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_usart.c @@ -0,0 +1,811 @@ +/** + ************************************************************************** + * @file at32f435_437_usart.c + * @brief contains all the functions for the usart firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* includes ------------------------------------------------------------------*/ +#include "at32f435_437_conf.h" +#include "at32f435_437_usart.h" +#include "at32f435_437_crm.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup USART + * @brief USART driver modules + * @{ + */ + +#ifdef USART_MODULE_ENABLED + +/** @defgroup USART_private_functions + * @{ + */ + +/** + * @brief deinitialize the usart peripheral registers to their default reset values. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7,or UART8. + * @retval none + */ +void usart_reset(usart_type* usart_x) +{ + if(usart_x == USART1) + { + crm_periph_reset(CRM_USART1_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_USART1_PERIPH_RESET, FALSE); + } + else if(usart_x == USART2) + { + crm_periph_reset(CRM_USART2_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_USART2_PERIPH_RESET, FALSE); + } + else if(usart_x == USART3) + { + crm_periph_reset(CRM_USART3_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_USART3_PERIPH_RESET, FALSE); + } + else if(usart_x == UART4) + { + crm_periph_reset(CRM_UART4_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_UART4_PERIPH_RESET, FALSE); + } + else if(usart_x == UART5) + { + crm_periph_reset(CRM_UART5_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_UART5_PERIPH_RESET, FALSE); + } + else if(usart_x == USART6) + { + crm_periph_reset(CRM_USART6_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_USART6_PERIPH_RESET, FALSE); + } + else if(usart_x == UART7) + { + crm_periph_reset(CRM_UART7_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_UART7_PERIPH_RESET, FALSE); + } +#if defined (AT32F435Zx) || defined (AT32F435Vx) || defined (AT32F435Rx) || \ + defined (AT32F437Zx) || defined (AT32F437Vx) || defined (AT32F437Rx) + else if(usart_x == UART8) + { + crm_periph_reset(CRM_UART8_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_UART8_PERIPH_RESET, FALSE); + } +#endif +} + +/** + * @brief initialize the usart peripheral according to the specified parameters. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4 ,UART5, USART6, UART7 or UART8. + * @param baud_rate: configure the usart communication baud rate. + * @param data_bit: data bits transmitted or received in a frame + * this parameter can be one of the following values: + * - USART_DATA_7BITS + * - USART_DATA_8BITS + * - USART_DATA_9BITS. + * note: + * - when parity check is disabled, the data bit width is the actual data bit number. + * - when parity check is enabled, the data bit width is the actual data bit number minus 1, and the MSB bit is replaced with the parity bit. + * @param stop_bit: stop bits transmitted + * this parameter can be one of the following values: + * - USART_STOP_1_BIT + * - USART_STOP_0_5_BIT. + * - USART_STOP_2_BIT + * - USART_STOP_1_5_BIT. + * @retval none + */ +void usart_init(usart_type* usart_x, uint32_t baud_rate, usart_data_bit_num_type data_bit, usart_stop_bit_num_type stop_bit) +{ + crm_clocks_freq_type clocks_freq; + uint32_t apb_clock, temp_val; + crm_clocks_freq_get(&clocks_freq); + if((usart_x == USART1) || (usart_x == USART6)) + { + apb_clock = clocks_freq.apb2_freq; + } + else + { + apb_clock = clocks_freq.apb1_freq; + } + temp_val = (apb_clock * 10 / baud_rate); + if((temp_val % 10) < 5) + { + temp_val = (temp_val / 10); + } + else + { + temp_val = (temp_val / 10) + 1; + } + usart_x->baudr_bit.div = temp_val; + if(data_bit == USART_DATA_7BITS) + { + usart_x->ctrl1_bit.dbn_h = 1; + usart_x->ctrl1_bit.dbn_l = 0; + } + else if(data_bit == USART_DATA_8BITS) + { + usart_x->ctrl1_bit.dbn_h = 0; + usart_x->ctrl1_bit.dbn_l = 0; + } + else + { + usart_x->ctrl1_bit.dbn_h = 0; + usart_x->ctrl1_bit.dbn_l = 1; + } + usart_x->ctrl2_bit.stopbn = stop_bit; +} + +/** + * @brief usart parity selection config. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4 ,UART5, USART6, UART7 or UART8. + * @param parity: select the none, odd or even parity. + * this parameter can be one of the following values: + * - USART_PARITY_NONE + * - USART_PARITY_EVEN. + * - USART_PARITY_ODD + * @retval none + */ +void usart_parity_selection_config(usart_type* usart_x, usart_parity_selection_type parity) +{ + if(parity == USART_PARITY_NONE) + { + usart_x->ctrl1_bit.psel = FALSE; + usart_x->ctrl1_bit.pen = FALSE; + } + else if(parity == USART_PARITY_EVEN) + { + usart_x->ctrl1_bit.psel = FALSE; + usart_x->ctrl1_bit.pen = TRUE; + } + else if(parity == USART_PARITY_ODD) + { + usart_x->ctrl1_bit.psel = TRUE; + usart_x->ctrl1_bit.pen = TRUE; + } +} + +/** + * @brief enable or disable the specified usart peripheral. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param new_state: new state of the usart peripheral. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl1_bit.uen = new_state; +} + +/** + * @brief usart transmitter enable. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4 ,UART5, USART6, UART7 or UART8. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void usart_transmitter_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl1_bit.ten = new_state; +} + +/** + * @brief usart receiver enable. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4 ,UART5, USART6, UART7 or UART8. + * @param new_state: TRUE or FALSE. + * @retval none + */ +void usart_receiver_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl1_bit.ren = new_state; +} + +/** + * @brief usart clock config. + * @note clock config are not available for UART4, UART5, UART7 and UART8. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 or USART6. + * @param clk_pol: polarity of the clock output on the ck pin. + * this parameter can be one of the following values: + * - USART_CLOCK_POLARITY_LOW + * - USART_CLOCK_POLARITY_HIGH + * @param clk_pha: phase of the clock output on the ck pin. + * this parameter can be one of the following values: + * - USART_CLOCK_PHASE_1EDGE + * - USART_CLOCK_PHASE_2EDGE + * @param clk_lb: whether the clock pulse of the last data bit transmitted (MSB) is outputted on the ck pin. + * this parameter can be one of the following values: + * - USART_CLOCK_LAST_BIT_NONE + * - USART_CLOCK_LAST_BIT_OUTPUT + * @retval none + */ +void usart_clock_config(usart_type* usart_x, usart_clock_polarity_type clk_pol, usart_clock_phase_type clk_pha, usart_lbcp_type clk_lb) +{ + usart_x->ctrl2_bit.clkpol = clk_pol; + usart_x->ctrl2_bit.clkpha = clk_pha; + usart_x->ctrl2_bit.lbcp = clk_lb; +} + +/** + * @brief usart enable the ck pin. + * @note clock enable are not available for UART4, UART5, UART7 and UART8. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 or USART6. + * @param new_state: TRUE or FALSE + * @retval none + */ +void usart_clock_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl2_bit.clken = new_state; +} + +/** + * @brief enable or disable the specified usart interrupts. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param usart_int: specifies the USART interrupt sources to be enabled or disabled. + * this parameter can be one of the following values: + * - USART_IDLE_INT: idle interrupt + * - USART_RDBF_INT: rdbf interrupt + * - USART_TDC_INT: tdc interrupt + * - USART_TDBE_INT: tdbe interrupt + * - USART_PERR_INT: perr interrupt + * - USART_BF_INT: break frame interrupt + * - USART_ERR_INT: err interrupt + * - USART_CTSCF_INT: ctscf interrupt + * @param new_state: new state of the specified usart interrupts. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_interrupt_enable(usart_type* usart_x, uint32_t usart_int, confirm_state new_state) +{ + if(new_state == TRUE) + PERIPH_REG((uint32_t)usart_x, usart_int) |= PERIPH_REG_BIT(usart_int); + else + PERIPH_REG((uint32_t)usart_x, usart_int) &= ~PERIPH_REG_BIT(usart_int); +} + +/** + * @brief enable or disable the usart's dma transmitter interface. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param new_state: new state of the dma request sources. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_dma_transmitter_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl3_bit.dmaten = new_state; +} + +/** + * @brief enable or disable the usart's dma receiver interface. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param new_state: new state of the dma request sources. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_dma_receiver_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl3_bit.dmaren = new_state; +} + +/** + * @brief set the wakeup id of the usart. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param usart_id: the matching id(0x0~0xFF). + * @retval none + */ +void usart_wakeup_id_set(usart_type* usart_x, uint8_t usart_id) +{ + if(usart_x->ctrl2_bit.idbn == USART_ID_FIXED_4_BIT) + { + usart_x->ctrl2_bit.id_l = (usart_id & 0x0F); + usart_x->ctrl2_bit.id_h = 0; + } + else + { + usart_x->ctrl2_bit.id_l = (usart_id & 0x0F); + usart_x->ctrl2_bit.id_h = ((usart_id & 0xF0) >> 4); + } +} + +/** + * @brief select the usart wakeup method in multi-processor communication. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param wakeup_mode: determines the way to wake up usart method. + * this parameter can be one of the following values: + * - USART_WAKEUP_BY_IDLE_FRAME + * - USART_WAKEUP_BY_MATCHING_ID + * @retval none + */ +void usart_wakeup_mode_set(usart_type* usart_x, usart_wakeup_mode_type wakeup_mode) +{ + usart_x->ctrl1_bit.wum = wakeup_mode; +} + +/** + * @brief config the usart in mute mode in multi-processor communication. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param new_state: new state of the usart mute mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_receiver_mute_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl1_bit.rm = new_state; +} + +/** + * @brief set the usart break frame bit num. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param break_bit: specifies the break bit num. + * this parameter can be one of the following values: + * - USART_BREAK_10BITS + * - USART_BREAK_11BITS + * @retval none + */ +void usart_break_bit_num_set(usart_type* usart_x, usart_break_bit_num_type break_bit) +{ + usart_x->ctrl2_bit.bfbn = break_bit; +} + +/** + * @brief enable or disable the usart lin mode. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param new_state: new state of the usart lin mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_lin_mode_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl2_bit.linen = new_state; +} + +/** + * @brief transmit single data through the usart peripheral. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param data: the data to transmit. + * @retval none + */ +void usart_data_transmit(usart_type* usart_x, uint16_t data) +{ + usart_x->dt = (data & 0x01FF); +} + +/** + * @brief return the most recent received data by the usart peripheral. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @retval the received data. + */ +uint16_t usart_data_receive(usart_type* usart_x) +{ + return (uint16_t)(usart_x->dt); +} + +/** + * @brief transmit break characters. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @retval none + */ +void usart_break_send(usart_type* usart_x) +{ + usart_x->ctrl1_bit.sbf = TRUE; +} + +/** + * @brief config the specified usart smartcard guard time. + * @note The guard time bits are not available for UART4, UART5, UART7 or UART8. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 or USART6. + * @param guard_time_val: specifies the guard time (0x00~0xFF). + * @retval none + */ +void usart_smartcard_guard_time_set(usart_type* usart_x, uint8_t guard_time_val) +{ + usart_x->gdiv_bit.scgt = guard_time_val; +} + +/** + * @brief config the irda/smartcard division. + * @note the division are not available for UART4, UART5, UART7 or UART8. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 or USART6. + * @param div_val: specifies the division. + * @retval none + */ +void usart_irda_smartcard_division_set(usart_type* usart_x, uint8_t div_val) +{ + usart_x->gdiv_bit.isdiv = div_val; +} + +/** + * @brief enable or disable the usart smart card mode. + * @note the smart card mode are not available for UART4, UART5, UART7 or UART8. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 or USART6. + * @param new_state: new state of the smart card mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_smartcard_mode_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl3_bit.scmen = new_state; +} + +/** + * @brief enable or disable nack transmission in smartcard mode. + * @note the smart card nack are not available for UART4, UART5, UART7 or UART8. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 or USART6. + * @param new_state: new state of the nack transmission. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_smartcard_nack_set(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl3_bit.scnacken = new_state; +} + +/** + * @brief enable or disable the usart single line bidirectional half-duplex communication. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param new_state: new state of the single line half-duplex select. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_single_line_halfduplex_select(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl3_bit.slben = new_state; +} + +/** + * @brief enable or disable the usart's irda interface. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param new_state: new state of the irda mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_irda_mode_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl3_bit.irdaen = new_state; +} + +/** + * @brief configure the usart's irda low power. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param new_state: new state of the irda mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_irda_low_power_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl3_bit.irdalp = new_state; +} + +/** + * @brief configure the usart's hardware flow control. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 + * @param flow_state: specifies the hardware flow control. + * this parameter can be one of the following values: + * - USART_HARDWARE_FLOW_NONE + * - USART_HARDWARE_FLOW_RTS, + * - USART_HARDWARE_FLOW_CTS, + * - USART_HARDWARE_FLOW_RTS_CTS + * @retval none + */ +void usart_hardware_flow_control_set(usart_type* usart_x,usart_hardware_flow_control_type flow_state) +{ + if(flow_state == USART_HARDWARE_FLOW_NONE) + { + usart_x->ctrl3_bit.rtsen = FALSE; + usart_x->ctrl3_bit.ctsen = FALSE; + } + else if(flow_state == USART_HARDWARE_FLOW_RTS) + { + usart_x->ctrl3_bit.rtsen = TRUE; + usart_x->ctrl3_bit.ctsen = FALSE; + } + else if(flow_state == USART_HARDWARE_FLOW_CTS) + { + usart_x->ctrl3_bit.rtsen = FALSE; + usart_x->ctrl3_bit.ctsen = TRUE; + } + else if(flow_state == USART_HARDWARE_FLOW_RTS_CTS) + { + usart_x->ctrl3_bit.rtsen = TRUE; + usart_x->ctrl3_bit.ctsen = TRUE; + } +} + +/** + * @brief check whether the specified usart flag is set or not. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - USART_CTSCF_FLAG: cts change flag (not available for UART4,UART5,USART6,UART7 and UART8) + * - USART_BFF_FLAG: break frame flag + * - USART_TDBE_FLAG: transmit data buffer empty flag + * - USART_TDC_FLAG: transmit data complete flag + * - USART_RDBF_FLAG: receive data buffer full flag + * - USART_IDLEF_FLAG: idle flag + * - USART_ROERR_FLAG: receiver overflow error flag + * - USART_NERR_FLAG: noise error flag + * - USART_FERR_FLAG: framing error flag + * - USART_PERR_FLAG: parity error flag + * @retval the new state of usart_flag (SET or RESET). + */ +flag_status usart_flag_get(usart_type* usart_x, uint32_t flag) +{ + if(usart_x->sts & flag) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief check whether the specified usart interrupt flag is set or not. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param flag: specifies the flag to check. + * this parameter can be one of the following values: + * - USART_CTSCF_FLAG: cts change flag (not available for UART4,UART5) + * - USART_BFF_FLAG: break frame flag + * - USART_TDBE_FLAG: transmit data buffer empty flag + * - USART_TDC_FLAG: transmit data complete flag + * - USART_RDBF_FLAG: receive data buffer full flag + * - USART_IDLEF_FLAG: idle flag + * - USART_ROERR_FLAG: receiver overflow error flag + * - USART_NERR_FLAG: noise error flag + * - USART_FERR_FLAG: framing error flag + * - USART_PERR_FLAG: parity error flag + * @retval the new state of usart_flag (SET or RESET). + */ +flag_status usart_interrupt_flag_get(usart_type* usart_x, uint32_t flag) +{ + flag_status int_status = RESET; + + switch(flag) + { + case USART_CTSCF_FLAG: + int_status = (flag_status)usart_x->ctrl3_bit.ctscfien; + break; + case USART_BFF_FLAG: + int_status = (flag_status)usart_x->ctrl2_bit.bfien; + break; + case USART_TDBE_FLAG: + int_status = (flag_status)usart_x->ctrl1_bit.tdbeien; + break; + case USART_TDC_FLAG: + int_status = (flag_status)usart_x->ctrl1_bit.tdcien; + break; + case USART_RDBF_FLAG: + int_status = (flag_status)usart_x->ctrl1_bit.rdbfien; + break; + case USART_ROERR_FLAG: + int_status = (flag_status)(usart_x->ctrl1_bit.rdbfien || usart_x->ctrl3_bit.errien); + break; + case USART_IDLEF_FLAG: + int_status = (flag_status)usart_x->ctrl1_bit.idleien; + break; + case USART_NERR_FLAG: + case USART_FERR_FLAG: + int_status = (flag_status)usart_x->ctrl3_bit.errien; + break; + case USART_PERR_FLAG: + int_status = (flag_status)usart_x->ctrl1_bit.perrien; + break; + default: + int_status = RESET; + break; + } + + if(int_status != SET) + { + return RESET; + } + + if(usart_x->sts & flag) + { + return SET; + } + else + { + return RESET; + } +} + +/** + * @brief clear the usart's pending flags. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7 or UART8. + * @param flag: specifies the flag to clear. + * this parameter can be any combination of the following values: + * - USART_CTSCF_FLAG: (not available for UART4,UART5,USART6,UART7 and UART8). + * - USART_BFF_FLAG: + * - USART_TDC_FLAG: + * - USART_RDBF_FLAG: + * - USART_PERR_FLAG: + * - USART_FERR_FLAG: + * - USART_NERR_FLAG: + * - USART_ROERR_FLAG: + * - USART_IDLEF_FLAG: + * @note + * - USART_PERR_FLAG, USART_FERR_FLAG, USART_NERR_FLAG, USART_ROERR_FLAG and USART_IDLEF_FLAG are cleared by software + * sequence: a read operation to usart sts register (usart_flag_get()) + * followed by a read operation to usart dt register (usart_data_receive()). + * - USART_RDBF_FLAG can be also cleared by a read to the usart dt register(usart_data_receive()). + * - USART_TDC_FLAG can be also cleared by software sequence: a read operation to usart sts register (usart_flag_get()) + * followed by a write operation to usart dt register (usart_data_transmit()). + * - USART_TDBE_FLAG is cleared only by a write to the usart dt register(usart_data_transmit()). + * @retval none + */ +void usart_flag_clear(usart_type* usart_x, uint32_t flag) +{ + if(flag & (USART_PERR_FLAG | USART_FERR_FLAG | USART_NERR_FLAG | USART_ROERR_FLAG | USART_IDLEF_FLAG)) + { + UNUSED(usart_x->sts); + UNUSED(usart_x->dt); + } + else + { + usart_x->sts = ~flag; + } +} + +/** + * @brief configure the usart's rs485 transmit delay time. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 + * @param start_delay_time: transmit start delay time. + * @param complete_delay_time: transmit complete delay time. + * @retval none + */ +void usart_rs485_delay_time_config(usart_type* usart_x, uint8_t start_delay_time, uint8_t complete_delay_time) +{ + usart_x->ctrl1_bit.tsdt = start_delay_time; + usart_x->ctrl1_bit.tcdt = complete_delay_time; +} + +/** + * @brief swap the usart's transmit receive pin. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7,or UART8. + * @param new_state: new state of the usart peripheral. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_transmit_receive_pin_swap(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl2_bit.trpswap = new_state; +} + +/** + * @brief set the usart's identification bit num. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3, UART4, UART5, USART6, UART7,or UART8. + * @param id_bit_num: the usart wakeup identification bit num. + * this parameter can be: USART_ID_FIXED_4_BIT or USART_ID_RELATED_DATA_BIT. + * @retval none + */ +void usart_id_bit_num_set(usart_type* usart_x, usart_identification_bit_num_type id_bit_num) +{ + usart_x->ctrl2_bit.idbn = (uint8_t)id_bit_num; +} + +/** + * @brief set the usart's de polarity. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 + * @param de_polarity: the usart de polarity selection. + * this parameter can be: USART_DE_POLARITY_HIGH or USART_DE_POLARITY_LOW. + * @retval none + */ +void usart_de_polarity_set(usart_type* usart_x, usart_de_polarity_type de_polarity) +{ + usart_x->ctrl3_bit.dep = (uint8_t)de_polarity; +} + +/** + * @brief enable or disable the usart's rs485 mode. + * @param usart_x: select the usart or the uart peripheral. + * this parameter can be one of the following values: + * USART1, USART2, USART3 + * @param new_state: new state of the irda mode. + * this parameter can be: TRUE or FALSE. + * @retval none + */ +void usart_rs485_mode_enable(usart_type* usart_x, confirm_state new_state) +{ + usart_x->ctrl3_bit.rs485en = new_state; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_usb.c b/armlib/at32_sys/drivers/src/at32f435_437_usb.c new file mode 100644 index 000000000..01a28ba4a --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_usb.c @@ -0,0 +1,1105 @@ +/** + ************************************************************************** + * @file at32f435_437_usb.c + * @brief contains all the functions for the usb firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" +#include "at32f435_437_usb.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup USB + * @brief USB driver modules + * @{ + */ + +#ifdef USB_MODULE_ENABLED + +/** @defgroup USB_private_functions + * @{ + */ + +#ifdef OTGFS_USB_GLOBAL +/** + * @brief usb global core soft reset + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval error status + */ +error_status usb_global_reset(otg_global_type *usbx) +{ + uint32_t timeout = 0; + while(usbx->grstctl_bit.ahbidle == RESET) + { + if(timeout ++ > 200000) + { + break; + } + } + timeout = 0; + usbx->grstctl_bit.csftrst = TRUE; + while(usbx->grstctl_bit.csftrst == SET) + { + if(timeout ++ > 200000) + { + break; + } + } + return SUCCESS; +} + +/** + * @brief usb global initialization + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_global_init(otg_global_type *usbx) +{ + /* reset otg moudle */ + usb_global_reset(usbx); + + /* exit power down mode */ + usbx->gccfg_bit.pwrdown = TRUE; +} + +/** + * @brief usb global select usb core (otg1 or otg2). + * @param usb_id: select otg1 or otg2 + * this parameter can be one of the following values: + * - USB_OTG1_ID + * - USB_OTG2_ID + * @retval usb global register type pointer + */ +otg_global_type *usb_global_select_core(uint8_t usb_id) +{ + if(usb_id == USB_OTG1_ID) + { + /* use otg1 */ + return OTG1_GLOBAL; + } + else + { + /* use otg2 */ + return OTG2_GLOBAL; + } +} + +/** + * @brief flush tx fifo + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param fifo_num: tx fifo num,when fifo_num=16,flush all tx fifo + * parameter as following values: 0-16 + * @retval none + */ +void usb_flush_tx_fifo(otg_global_type *usbx, uint32_t fifo_num) +{ + uint32_t timeout = 0; + /* set flush fifo number */ + usbx->grstctl_bit.txfnum = fifo_num; + + /* start flush fifo */ + usbx->grstctl_bit.txfflsh = TRUE; + + while(usbx->grstctl_bit.txfflsh == TRUE) + { + if(timeout ++ > 200000) + { + break; + } + } +} + +/** + * @brief flush rx fifo + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_flush_rx_fifo(otg_global_type *usbx) +{ + uint32_t timeout = 0; + usbx->grstctl_bit.rxfflsh = TRUE; + while(usbx->grstctl_bit.rxfflsh == TRUE) + { + if(timeout ++ > 200000) + { + break; + } + } +} + +/** + * @brief usb interrupt mask enable + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param interrupt: + * this parameter can be any combination of the following values: + * - USB_OTG_MODEMIS_INT + * - USB_OTG_OTGINT_INT + * - USB_OTG_SOF_INT + * - USB_OTG_RXFLVL_INT + * - USB_OTG_NPTXFEMP_INT + * - USB_OTG_GINNAKEFF_INT + * - USB_OTG_GOUTNAKEFF_INT + * - USB_OTG_ERLYSUSP_INT + * - USB_OTG_USBSUSP_INT + * - USB_OTG_USBRST_INT + * - USB_OTG_ENUMDONE_INT + * - USB_OTG_ISOOUTDROP_INT + * - USB_OTG_IEPT_INT + * - USB_OTG_OEPT_INT + * - USB_OTG_INCOMISOIN_INT + * - USB_OTG_INCOMPIP_INCOMPISOOUT_INT + * - USB_OTG_PRT_INT + * - USB_OTG_HCH_INT + * - USB_OTG_PTXFEMP_INT + * - USB_OTG_CONIDSCHG_INT + * - USB_OTG_DISCON_INT + * - USB_OTG_WKUP_INT + * @param new_state: TRUE or FALSE + * @retval none + */ +void usb_global_interrupt_enable(otg_global_type *usbx, uint16_t interrupt, confirm_state new_state) +{ + if(new_state == TRUE) + { + usbx->gintmsk |= interrupt; + } + else + { + usbx->gintmsk &= ~interrupt; + } +} + +/** + * @brief get all global core interrupt flag + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval intterupt flag + */ +uint32_t usb_global_get_all_interrupt(otg_global_type *usbx) +{ + uint32_t intsts = usbx->gintsts; + return intsts & usbx->gintmsk; +} + +/** + * @brief clear the global interrupt flag + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param flag: interrupt flag + * this parameter can be any combination of the following values: + * - USB_OTG_MODEMIS_FLAG + * - USB_OTG_OTGINT_FLAG + * - USB_OTG_SOF_FLAG + * - USB_OTG_RXFLVL_FLAG + * - USB_OTG_NPTXFEMP_FLAG + * - USB_OTG_GINNAKEFF_FLAG + * - USB_OTG_GOUTNAKEFF_FLAG + * - USB_OTG_ERLYSUSP_FLAG + * - USB_OTG_USBSUSP_FLAG + * - USB_OTG_USBRST_FLAG + * - USB_OTG_ENUMDONE_FLAG + * - USB_OTG_ISOOUTDROP_FLAG + * - USB_OTG_EOPF_FLAG + * - USB_OTG_IEPT_FLAG + * - USB_OTG_OEPT_FLAG + * - USB_OTG_INCOMISOIN_FLAG + * - USB_OTG_INCOMPIP_INCOMPISOOUT_FLAG + * - USB_OTG_PRT_FLAG + * - USB_OTG_HCH_FLAG + * - USB_OTG_PTXFEMP_FLAG + * - USB_OTG_CONIDSCHG_FLAG + * - USB_OTG_DISCON_FLAG + * - USB_OTG_WKUP_FLAG + * @retval none + */ +void usb_global_clear_interrupt(otg_global_type *usbx, uint32_t flag) +{ + usbx->gintsts = flag; +} + +/** + * @brief usb global interrupt enable + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * OTG1_GLOBAL , OTG2_GLOBAL + * @retval none + */ +void usb_interrupt_enable(otg_global_type *usbx) +{ + usbx->gahbcfg_bit.glbintmsk = TRUE; +} + +/** + * @brief usb global interrupt disable + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_interrupt_disable(otg_global_type *usbx) +{ + usbx->gahbcfg_bit.glbintmsk = FALSE; +} + +/** + * @brief usb set rx fifo size + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param size: rx fifo size + * @retval none + */ +void usb_set_rx_fifo(otg_global_type *usbx, uint16_t size) +{ + usbx->grxfsiz = size; +} + +/** + * @brief usb set tx fifo size + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param txfifo: the fifo number + * @param size: tx fifo size + * @retval none + */ +void usb_set_tx_fifo(otg_global_type *usbx, uint8_t txfifo, uint16_t size) +{ + uint8_t i_index = 0; + uint32_t offset = 0; + + offset = usbx->grxfsiz; + if(txfifo == 0) + { + usbx->gnptxfsiz_ept0tx = offset | (size << 16); + } + else + { + offset += usbx->gnptxfsiz_ept0tx_bit.nptxfdep; + for(i_index = 0; i_index < (txfifo - 1); i_index ++) + { + offset += usbx->dieptxfn_bit[i_index].ineptxfdep; + } + usbx->dieptxfn[txfifo - 1] = offset | (size << 16); + } +} + + +/** + * @brief set otg mode(device or host mode) + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param mode: + this parameter can be one of the following values: + * - OTG_DEVICE_MODE + * - OTG_HOST_MODE + * - OTG_DRD_MODE + * @retval none + */ +void usb_global_set_mode(otg_global_type *usbx, uint32_t mode) +{ + /* set otg to device mode */ + if(mode == OTG_DEVICE_MODE) + { + usbx->gusbcfg_bit.fhstmode = FALSE; + usbx->gusbcfg_bit.fdevmode = TRUE; + } + + /* set otg to host mode */ + if(mode == OTG_HOST_MODE) + { + usbx->gusbcfg_bit.fdevmode = FALSE; + usbx->gusbcfg_bit.fhstmode = TRUE; + } + + /* set otg to default mode */ + if(mode == OTG_DRD_MODE) + { + usbx->gusbcfg_bit.fdevmode = FALSE; + usbx->gusbcfg_bit.fhstmode = FALSE; + } +} + + +/** + * @brief disable the transceiver power down mode + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_global_power_on(otg_global_type *usbx) +{ + /* core soft reset */ + usbx->grstctl_bit.csftrst = TRUE; + while(usbx->grstctl_bit.csftrst); + + /* disable power down mode */ + usbx->gccfg_bit.pwrdown = TRUE; + +} + +/** + * @brief usb stop phy clock + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_stop_phy_clk(otg_global_type *usbx) +{ + OTG_PCGCCTL(usbx)->pcgcctl_bit.stoppclk = TRUE; +} + +/** + * @brief usb open phy clock + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_open_phy_clk(otg_global_type *usbx) +{ + OTG_PCGCCTL(usbx)->pcgcctl_bit.stoppclk = FALSE; +} + + +/** + * @brief write data from user memory to usb buffer + * @param pusr_buf: point to user buffer + * @param offset_addr: endpoint tx offset address + * @param nbytes: number of bytes data write to usb buffer + * @retval none + */ +void usb_write_packet(otg_global_type *usbx, uint8_t *pusr_buf, uint16_t num, uint16_t nbytes) +{ + uint32_t n_index; + uint32_t nhbytes = (nbytes + 3) / 4; + uint32_t *pbuf = (uint32_t *)pusr_buf; + for(n_index = 0; n_index < nhbytes; n_index ++) + { +#if defined (__ICCARM__) && (__VER__ < 7000000) + USB_FIFO(usbx, num) = *(__packed uint32_t *)pbuf; +#else + USB_FIFO(usbx, num) = __UNALIGNED_UINT32_READ(pbuf); +#endif + pbuf ++; + } +} + +/** + * @brief read data from usb buffer to user buffer + * @param pusr_buf: point to user buffer + * @param offset_addr: endpoint rx offset address + * @param nbytes: number of bytes data write to usb buffer + * @retval none + */ +void usb_read_packet(otg_global_type *usbx, uint8_t *pusr_buf, uint16_t num, uint16_t nbytes) +{ + uint32_t n_index; + uint32_t nhbytes = (nbytes + 3) / 4; + uint32_t *pbuf = (uint32_t *)pusr_buf; + UNUSED(num); + for(n_index = 0; n_index < nhbytes; n_index ++) + { +#if defined (__ICCARM__) && (__VER__ < 7000000) + *(__packed uint32_t *)pbuf = USB_FIFO(usbx, 0); +#else + __UNALIGNED_UINT32_WRITE(pbuf, (USB_FIFO(usbx, 0))); +#endif + pbuf ++; + } +} +#endif + + +#ifdef OTGFS_USB_DEVICE +/** + * @brief open usb endpoint + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param ept_info: endpoint information structure + * @retval none + */ +void usb_ept_open(otg_global_type *usbx, usb_ept_info *ept_info) +{ + uint8_t mps = USB_EPT0_MPS_64; + if(ept_info->eptn == USB_EPT0) + { + if(ept_info->maxpacket == 0x40) + { + mps = USB_EPT0_MPS_64; + } + else if(ept_info->maxpacket == 0x20) + { + mps = USB_EPT0_MPS_32; + } + else if(ept_info->maxpacket == 0x10) + { + mps = USB_EPT0_MPS_16; + } + else if(ept_info->maxpacket == 0x08) + { + mps = USB_EPT0_MPS_8; + } + } + if(ept_info->trans_type == EPT_ISO_TYPE) + { + OTG_DEVICE(usbx)->dctl |= 1 << 15; + } + /* endpoint direction is in */ + if(ept_info->inout == EPT_DIR_IN) + { + OTG_DEVICE(usbx)->daintmsk |= 1 << ept_info->eptn; + if(ept_info->eptn == USB_EPT0) + { + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.mps = mps; + } + else + { + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.mps = ept_info->maxpacket; + } + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.eptype = ept_info->trans_type; + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.txfnum = ept_info->eptn; + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.setd0pid = TRUE; + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.usbacept = TRUE; + } + /* endpoint direction is out */ + else + { + OTG_DEVICE(usbx)->daintmsk |= (1 << ept_info->eptn) << 16; + if(ept_info->eptn == USB_EPT0) + { + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.mps = mps; + } + else + { + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.mps = ept_info->maxpacket; + } + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.eptype = ept_info->trans_type; + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.setd0pid = TRUE; + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.usbacept = TRUE; + } +} + +/** + * @brief close usb endpoint + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param ept_info: endpoint information structure + * @retval none + */ +void usb_ept_close(otg_global_type *usbx, usb_ept_info *ept_info) +{ + if(ept_info->inout == EPT_DIR_IN) + { + OTG_DEVICE(usbx)->daintmsk &= ~(1 << ept_info->eptn); + if(USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.eptena == SET) + { + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.eptdis = TRUE; + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.snak = TRUE; + } + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.usbacept = FALSE; + } + else + { + OTG_DEVICE(usbx)->daintmsk &= ~((1 << ept_info->eptn) << 16); + if(USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.eptena == SET) + { + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.eptdis = TRUE; + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.snak = TRUE; + } + + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.usbacept = FALSE; + } +} + + +/** + * @brief set endpoint tx or rx status to stall + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param ept_info: endpoint information structure + * @retval none + */ +void usb_ept_stall(otg_global_type *usbx, usb_ept_info *ept_info) +{ + if(ept_info->inout == EPT_DIR_IN) + { + if(USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.eptena == RESET) + { + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.eptdis = FALSE; + } + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.stall = SET; + } + else + { + if(USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.eptena == RESET) + { + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.eptdis = FALSE; + } + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.stall = TRUE; + } +} + +/** + * @brief clear endpoint tx or rx status to stall + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param ept_info: endpoint information structure + * @retval none + */ +void usb_ept_clear_stall(otg_global_type *usbx, usb_ept_info *ept_info) +{ + if(ept_info->inout == EPT_DIR_IN) + { + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.stall = FALSE; + if(ept_info->trans_type == EPT_INT_TYPE || ept_info->trans_type == EPT_BULK_TYPE) + { + USB_INEPT(usbx, ept_info->eptn)->diepctl_bit.setd0pid = TRUE; + } + } + else + { + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.stall = FALSE; + if(ept_info->trans_type == EPT_INT_TYPE || ept_info->trans_type == EPT_BULK_TYPE) + { + USB_OUTEPT(usbx, ept_info->eptn)->doepctl_bit.setd0pid = TRUE; + } + } +} + +/** + * @brief get all out endpoint interrupt bits + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval out endpoint interrupt bits + */ +uint32_t usb_get_all_out_interrupt(otg_global_type *usbx) +{ + uint32_t intsts = OTG_DEVICE(usbx)->daint; + return ((intsts & (OTG_DEVICE(usbx)->daintmsk)) >> 16); +} + +/** + * @brief get all in endpoint interrupt bits + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval in endpoint interrupt bits + */ +uint32_t usb_get_all_in_interrupt(otg_global_type *usbx) +{ + uint32_t intsts = OTG_DEVICE(usbx)->daint; + return ((intsts & (OTG_DEVICE(usbx)->daintmsk)) & 0xFFFF); +} + + +/** + * @brief get out endpoint interrupt flag + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param eptn: endpoint number + * @retval out endpoint interrupt flags + */ +uint32_t usb_ept_out_interrupt(otg_global_type *usbx, uint32_t eptn) +{ + uint32_t intsts = USB_OUTEPT(usbx, eptn)->doepint; + return (intsts & (OTG_DEVICE(usbx)->doepmsk)); +} + +/** + * @brief get in endpoint interrupt flag + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param eptn: endpoint number + * @retval in endpoint intterupt flags + */ +uint32_t usb_ept_in_interrupt(otg_global_type *usbx, uint32_t eptn) +{ + uint32_t intsts, mask1, mask2; + mask1 = OTG_DEVICE(usbx)->diepmsk; + mask2 = OTG_DEVICE(usbx)->diepempmsk; + mask1 |= ((mask2 >> eptn) & 0x1) << 7; + intsts = USB_INEPT(usbx, eptn)->diepint & mask1; + return intsts; +} + +/** + * @brief clear out endpoint interrupt flag + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param eptn: endpoint number + * @retval flag: interrupt flag + * this parameter can be any combination of the following values: + * - USB_OTG_DOEPINT_XFERC_FLAG + * - USB_OTG_DOEPINT_EPTDISD_FLAG + * - USB_OTG_DOEPINT_SETUP_FLAG + * - USB_OTG_DOEPINT_OTEPDIS_FLAG + * - USB_OTG_DOEPINT_B2BSTUP_FLAG + */ +void usb_ept_out_clear(otg_global_type *usbx, uint32_t eptn, uint32_t flag) +{ + USB_OUTEPT(usbx, eptn)->doepint = flag; +} + +/** + * @brief clear in endpoint interrupt flag + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param eptn: endpoint number + * @retval flag: interrupt flag + * this parameter can be any combination of the following values: + * - USB_OTG_DIEPINT_XFERC_FLAG + * - USB_OTG_DIEPINT_EPTDISD_FLAG + * - USB_OTG_DIEPINT_TMROC_FLAG + * - USB_OTG_DIEPINT_INTTXFE_FLAG + * - USB_OTG_DIEPINT_INEPNE_FLAG + * - USB_OTG_DIEPINT_TXFE_FLAG + */ +void usb_ept_in_clear(otg_global_type *usbx, uint32_t eptn, uint32_t flag) +{ + USB_INEPT(usbx, eptn)->diepint = flag; +} + + +/** + * @brief set the host assignment address + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param address: host assignment address + * @retval none + */ +void usb_set_address(otg_global_type *usbx, uint8_t address) +{ + OTG_DEVICE(usbx)->dcfg_bit.devaddr = address; +} + +/** + * @brief enable endpoint 0 out + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_ept0_start(otg_global_type *usbx) +{ + otg_eptout_type *usb_outept = USB_OUTEPT(usbx, 0); + usb_outept->doeptsiz = 0; + usb_outept->doeptsiz_bit.pktcnt = 1; + usb_outept->doeptsiz_bit.xfersize = 24; + usb_outept->doeptsiz_bit.rxdpid_setupcnt = 3; +} + + +/** + * @brief endpoint 0 start setup + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_ept0_setup(otg_global_type *usbx) +{ + USB_INEPT(usbx, 0)->diepctl_bit.mps = 0; + OTG_DEVICE(usbx)->dctl_bit.cgnpinak = FALSE; +} + +/** + * @brief connect usb device by enable pull-up + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_connect(otg_global_type *usbx) +{ + /* D+ 1.5k pull-up enable */ + OTG_DEVICE(usbx)->dctl_bit.sftdiscon = FALSE; +} + +/** + * @brief disconnect usb device by disable pull-up + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_disconnect(otg_global_type *usbx) +{ + /* D+ 1.5k pull-up disable */ + OTG_DEVICE(usbx)->dctl_bit.sftdiscon = TRUE; +} + + +/** + * @brief usb remote wakeup set + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_remote_wkup_set(otg_global_type *usbx) +{ + OTG_DEVICE(usbx)->dctl_bit.rwkupsig = TRUE; +} + +/** + * @brief usb remote wakeup clear + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_remote_wkup_clear(otg_global_type *usbx) +{ + OTG_DEVICE(usbx)->dctl_bit.rwkupsig = FALSE; +} + +/** + * @brief usb suspend status get + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval usb suspend status + */ +uint8_t usb_suspend_status_get(otg_global_type *usbx) +{ + return OTG_DEVICE(usbx)->dsts_bit.suspsts; +} +#endif + +#ifdef OTGFS_USB_HOST +/** + * @brief usb port power on + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param state: state (TRUE or FALSE) + * @retval none + */ +void usb_port_power_on(otg_global_type *usbx, confirm_state state) +{ + otg_host_type *usb_host = OTG_HOST(usbx); + uint32_t hprt_val = usb_host->hprt; + + hprt_val &= ~(USB_OTG_HPRT_PRTENA | USB_OTG_HPRT_PRTENCHNG | + USB_OTG_HPRT_PRTOVRCACT | USB_OTG_HPRT_PRTCONDET); + + if(state == TRUE) + { + usb_host->hprt = hprt_val | USB_OTG_HPRT_PRTPWR; + } + else + { + usb_host->hprt = hprt_val & (~USB_OTG_HPRT_PRTPWR); + } +} + +/** + * @brief get current frame number + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +uint32_t usbh_get_frame(otg_global_type *usbx) +{ + otg_host_type *usb_host = OTG_HOST(usbx); + return usb_host->hfnum & 0xFFFF; +} + +/** + * @brief enable one host channel + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param chn: host channel number + * @param ept_num: devvice endpoint number + * @param dev_address: device address + * @param type: channel transfer type + * this parameter can be one of the following values: + * - EPT_CONTROL_TYPE + * - EPT_BULK_TYPE + * - EPT_INT_TYPE + * - EPT_ISO_TYPE + * @param maxpacket: support max packe size for this channel + * @param speed: device speed + * this parameter can be one of the following values: + * - USB_PRTSPD_FULL_SPEED + * - USB_PRTSPD_LOW_SPEED + * @retval none + */ +void usb_hc_enable(otg_global_type *usbx, + uint8_t chn, + uint8_t ept_num, + uint8_t dev_address, + uint8_t type, + uint16_t maxpacket, + uint8_t speed) +{ + otg_hchannel_type *hch = USB_CHL(usbx, chn); + otg_host_type *usb_host = OTG_HOST(usbx); + + /* clear old interrupt flag */ + hch->hcint = 0xFFFFFFFF; + + switch(type) + { + case EPT_CONTROL_TYPE: + case EPT_BULK_TYPE: + hch->hcintmsk |= USB_OTG_HC_XFERCM_INT | USB_OTG_HC_STALLM_INT | + USB_OTG_HC_XACTERRM_INT | USB_OTG_HC_NAKM_INT | + USB_OTG_HC_DTGLERRM_INT; + if(ept_num & 0x80) + { + hch->hcintmsk_bit.bblerrmsk = TRUE; + } + break; + case EPT_INT_TYPE: + hch->hcintmsk |= USB_OTG_HC_XFERCM_INT | USB_OTG_HC_STALLM_INT | + USB_OTG_HC_XACTERRM_INT | USB_OTG_HC_NAKM_INT | + USB_OTG_HC_DTGLERRM_INT | USB_OTG_HC_FRMOVRRUN_INT; + break; + case EPT_ISO_TYPE: + + hch->hcintmsk |= USB_OTG_HC_XFERCM_INT | USB_OTG_HC_ACKM_INT | + USB_OTG_HC_FRMOVRRUN_INT; + break; + } + usb_host->haintmsk |= 1 << chn; + usbx->gintmsk_bit.hchintmsk = TRUE; + + hch->hcchar_bit.devaddr = dev_address; + hch->hcchar_bit.eptnum = ept_num & 0x7F; + hch->hcchar_bit.eptdir = (ept_num & 0x80)?1:0; + hch->hcchar_bit.lspddev = (speed == USB_PRTSPD_LOW_SPEED)?1:0; + hch->hcchar_bit.eptype = type; + hch->hcchar_bit.mps = maxpacket; + + if(type == EPT_INT_TYPE) + { + hch->hcchar_bit.oddfrm = TRUE; + } +} + +/** + * @brief host read channel interrupt + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval interrupt flag + */ +uint32_t usb_hch_read_interrupt(otg_global_type *usbx) +{ + otg_host_type *usb_host = OTG_HOST(usbx); + return usb_host->haint & 0xFFFF; +} + +/** + * @brief disable host + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @retval none + */ +void usb_host_disable(otg_global_type *usbx) +{ + uint32_t i_index = 0; + otg_hchannel_type *hch; + otg_host_type *usb_host = OTG_HOST(usbx); + + usbx->gahbcfg_bit.glbintmsk = FALSE; + usb_flush_rx_fifo(usbx); + usb_flush_tx_fifo(usbx, 0x10); + + for(i_index = 0; i_index < 16; i_index ++) + { + hch = USB_CHL(usbx, i_index); + if(hch->hcchar_bit.chena == TRUE) + { + hch->hcchar_bit.chdis = TRUE; + } + } + usb_host->haint = 0xFFFFFFFF; + usbx->gintsts = 0xFFFFFFFF; + usbx->gahbcfg_bit.glbintmsk = TRUE; +} + +/** + * @brief halt channel + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param chn: channel number + * @retval none + */ +void usb_hch_halt(otg_global_type *usbx, uint8_t chn) +{ + uint32_t count = 0; + otg_hchannel_type *usb_chh = USB_CHL(usbx, chn); + otg_host_type *usb_host = OTG_HOST(usbx); + + /* endpoint type is control or bulk */ + if(usb_chh->hcchar_bit.eptype == EPT_CONTROL_TYPE || + usb_chh->hcchar_bit.eptype == EPT_BULK_TYPE) + { + usb_chh->hcchar_bit.chdis = TRUE; + if((usbx->gnptxsts_bit.nptxqspcavail) == 0) + { + usb_chh->hcchar_bit.chena = FALSE; + if(usb_chh->hcchar_bit.chena != TRUE) + usb_chh->hcchar_bit.chena = TRUE; + do + { + if(count ++ > 1000) + break; + }while(usb_chh->hcchar_bit.chena == SET); + } + else + { + if(usb_chh->hcchar_bit.chena != TRUE) + usb_chh->hcchar_bit.chena = TRUE; + } + } + else + { + usb_chh->hcchar_bit.chdis = TRUE; + if((usb_host->hptxsts_bit.ptxqspcavil) == 0) + { + usb_chh->hcchar_bit.chena = FALSE; + if(usb_chh->hcchar_bit.chena != TRUE) + usb_chh->hcchar_bit.chena = TRUE; + do + { + if(count ++ > 1000) + break; + }while(usb_chh->hcchar_bit.chena == SET); + } + else + { + if(usb_chh->hcchar_bit.chena != TRUE) + usb_chh->hcchar_bit.chena = TRUE; + } + } +} +/** + * @brief select full or low speed clock + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param clk: clock frequency + * @retval none + */ +void usbh_fsls_clksel(otg_global_type *usbx, uint8_t clk) +{ + otg_host_type *usb_host = OTG_HOST(usbx); + + usb_host->hcfg_bit.fslspclksel = clk; + if(clk == USB_HCFG_CLK_6M) + { + usb_host->hfir = 6000; + } + else + { + usb_host->hfir = 48000; + } +} +#endif + + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_wdt.c b/armlib/at32_sys/drivers/src/at32f435_437_wdt.c new file mode 100644 index 000000000..5e9e54ce4 --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_wdt.c @@ -0,0 +1,154 @@ +/** + ************************************************************************** + * @file at32f435_437_wdt.c + * @brief contains all the functions for the wdt firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup WDT + * @brief WDT driver modules + * @{ + */ + +#ifdef WDT_MODULE_ENABLED + +/** @defgroup WDT_private_functions + * @{ + */ + +/** + * @brief wdt enable ,the reload value will be sent to the counter + * @param none + * @retval none + */ +void wdt_enable(void) +{ + WDT->cmd = WDT_CMD_ENABLE; +} + +/** + * @brief reload wdt counter + * @param none + * @retval none + */ +void wdt_counter_reload(void) +{ + WDT->cmd = WDT_CMD_RELOAD; +} + +/** + * @brief set wdt counter reload value + * @param reload_value (0x0000~0x0FFF) + * @retval none + */ +void wdt_reload_value_set(uint16_t reload_value) +{ + WDT->rld = reload_value; +} + +/** + * @brief set wdt division divider + * @param division + * this parameter can be one of the following values: + * - WDT_CLK_DIV_4 + * - WDT_CLK_DIV_8 + * - WDT_CLK_DIV_16 + * - WDT_CLK_DIV_32 + * - WDT_CLK_DIV_64 + * - WDT_CLK_DIV_128 + * - WDT_CLK_DIV_256 + * @retval none + */ +void wdt_divider_set(wdt_division_type division) +{ + WDT->div_bit.div = division; +} + +/** + * @brief enable or disable wdt cmd register write + * @param new_state (TRUE or FALSE) + * @retval none + */ +void wdt_register_write_enable( confirm_state new_state) +{ + if(new_state == FALSE) + { + WDT->cmd = WDT_CMD_LOCK; + } + else + { + WDT->cmd = WDT_CMD_UNLOCK; + } +} + +/** + * @brief get wdt flag + * @param wdt_flag + * this parameter can be one of the following values: + * - WDT_DIVF_UPDATE_FLAG: division value update complete flag. + * - WDT_RLDF_UPDATE_FLAG: reload value update complete flag. + * - WDT_WINF_UPDATE_FLAG: window value update complete flag. + * @retval state of wdt flag + */ +flag_status wdt_flag_get(uint16_t wdt_flag) +{ + flag_status status = RESET; + + if ((WDT->sts & wdt_flag) != (uint16_t)RESET) + { + status = SET; + } + else + { + status = RESET; + } + + return status; +} + +/** + * @brief wdt window counter value set + * @param window_cnt (0x0000~0x0FFF) + * @retval none + */ +void wdt_window_counter_set(uint16_t window_cnt) +{ + WDT->win_bit.win = window_cnt; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_wwdt.c b/armlib/at32_sys/drivers/src/at32f435_437_wwdt.c new file mode 100644 index 000000000..1b338f47b --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_wwdt.c @@ -0,0 +1,149 @@ +/** + ************************************************************************** + * @file at32f435_437_wwdt.c + * @brief contains all the functions for the wwdt firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup WWDT + * @brief WWDT driver modules + * @{ + */ + +#ifdef WWDT_MODULE_ENABLED + +/** @defgroup WWDT_private_functions + * @{ + */ + +/** + * @brief wwdt reset by crm reset register + * @retval none + */ +void wwdt_reset(void) +{ + crm_periph_reset(CRM_WWDT_PERIPH_RESET, TRUE); + crm_periph_reset(CRM_WWDT_PERIPH_RESET, FALSE); +} + +/** + * @brief wwdt division set + * @param division + * this parameter can be one of the following values: + * - WWDT_PCLK1_DIV_4096 (wwdt counter clock = (pclk1/4096)/1) + * - WWDT_PCLK1_DIV_8192 (wwdt counter clock = (pclk1/4096)/2) + * - WWDT_PCLK1_DIV_16384 (wwdt counter clock = (pclk1/4096)/4) + * - WWDT_PCLK1_DIV_32768 (wwdt counter clock = (pclk1/4096)/8) + * @retval none + */ +void wwdt_divider_set(wwdt_division_type division) +{ + WWDT->cfg_bit.div = division; +} + +/** + * @brief wwdt reload counter interrupt flag clear + * @param none + * @retval none + */ +void wwdt_flag_clear(void) +{ + WWDT->sts = 0; +} + +/** + * @brief wwdt enable and the counter value load + * @param wwdt_cnt (0x40~0x7f) + * @retval none + */ +void wwdt_enable(uint8_t wwdt_cnt) +{ + WWDT->ctrl = wwdt_cnt | WWDT_EN_BIT; +} + +/** + * @brief wwdt reload counter interrupt enable + * @param none + * @retval none + */ +void wwdt_interrupt_enable(void) +{ + WWDT->cfg_bit.rldien = TRUE; +} + +/** + * @brief wwdt reload counter interrupt flag get + * @param none + * @retval state of reload counter interrupt flag + */ +flag_status wwdt_flag_get(void) +{ + return (flag_status)WWDT->sts_bit.rldf; +} + +/** + * @brief wwdt reload counter interrupt flag get + * @param none + * @retval state of reload counter interrupt flag + */ +flag_status wwdt_interrupt_flag_get(void) +{ + return (flag_status)(WWDT->sts_bit.rldf && WWDT->cfg_bit.rldien); +} + +/** + * @brief wwdt counter value set + * @param wwdt_cnt (0x40~0x7f) + * @retval none + */ +void wwdt_counter_set(uint8_t wwdt_cnt) +{ + WWDT->ctrl_bit.cnt = wwdt_cnt; +} + +/** + * @brief wwdt window counter value set + * @param window_cnt (0x40~0x7f) + * @retval none + */ +void wwdt_window_counter_set(uint8_t window_cnt) +{ + WWDT->cfg_bit.win = window_cnt; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_sys/drivers/src/at32f435_437_xmc.c b/armlib/at32_sys/drivers/src/at32f435_437_xmc.c new file mode 100644 index 000000000..43f84b5dc --- /dev/null +++ b/armlib/at32_sys/drivers/src/at32f435_437_xmc.c @@ -0,0 +1,998 @@ +/** + ************************************************************************** + * @file at32f435_437_xmc.c + * @brief contains all the functions for the xmc firmware library + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "at32f435_437_conf.h" + +/** @addtogroup AT32F435_437_periph_driver + * @{ + */ + +/** @defgroup XMC + * @brief XMC driver modules + * @{ + */ + +#ifdef XMC_MODULE_ENABLED + +/** @defgroup XMC_private_functions + * @{ + */ + +/** + * @brief xmc nor or sram registers reset + * @param xmc_subbank + * this parameter can be one of the following values: + * - XMC_BANK1_NOR_SRAM1 + * - XMC_BANK1_NOR_SRAM2 + * - XMC_BANK1_NOR_SRAM3 + * - XMC_BANK1_NOR_SRAM4 + * @retval none + */ +void xmc_nor_sram_reset(xmc_nor_sram_subbank_type xmc_subbank) +{ + /* XMC_BANK1_NORSRAM1 */ + if(xmc_subbank == XMC_BANK1_NOR_SRAM1) + { + XMC_BANK1->ctrl_tmg_group[xmc_subbank].bk1ctrl = 0x000030DB; + } + /* XMC_BANK1_NORSRAM2, XMC_BANK1_NORSRAM3 or XMC_BANK1_NORSRAM4 */ + else + { + XMC_BANK1->ctrl_tmg_group[xmc_subbank].bk1ctrl = 0x000030D2; + } + XMC_BANK1->ctrl_tmg_group[xmc_subbank].bk1tmg = 0x0FFFFFFF; + XMC_BANK1->tmgwr_group[xmc_subbank].bk1tmgwr = 0x0FFFFFFF; +} + +/** + * @brief initialize the xmc nor/sram banks according to the specified + * parameters in the xmc_norsraminitstruct. + * @param xmc_norsram_init_struct : pointer to a xmc_norsram_init_type + * structure that contains the configuration information for + * the xmc nor/sram specified banks. + * @retval none + */ +void xmc_nor_sram_init(xmc_norsram_init_type* xmc_norsram_init_struct) +{ + /* bank1 nor/sram control register configuration */ + XMC_BANK1->ctrl_tmg_group[xmc_norsram_init_struct->subbank].bk1ctrl = + (uint32_t)xmc_norsram_init_struct->data_addr_multiplex | + xmc_norsram_init_struct->device | + xmc_norsram_init_struct->bus_type | + xmc_norsram_init_struct->burst_mode_enable | + xmc_norsram_init_struct->asynwait_enable | + xmc_norsram_init_struct->wait_signal_lv | + xmc_norsram_init_struct->wrapped_mode_enable | + xmc_norsram_init_struct->wait_signal_config | + xmc_norsram_init_struct->write_enable | + xmc_norsram_init_struct->wait_signal_enable | + xmc_norsram_init_struct->write_timing_enable | + xmc_norsram_init_struct->write_burst_syn; + + /* if nor flash device */ + if(xmc_norsram_init_struct->device == XMC_DEVICE_NOR) + { + XMC_BANK1->ctrl_tmg_group[xmc_norsram_init_struct->subbank].bk1ctrl_bit.noren = 0x1; + } +} + +/** + * @brief initialize the xmc nor/sram banks according to the specified + * parameters in the xmc_rw_timing_struct and xmc_w_timing_struct. + * @param xmc_rw_timing_struct : pointer to a xmc_norsram_timing_init_type + * structure that contains the configuration information for + * the xmc nor/sram specified banks. + * @param xmc_w_timing_struct : pointer to a xmc_norsram_timing_init_type + * structure that contains the configuration information for + * the xmc nor/sram specified banks. + * @retval none + */ +void xmc_nor_sram_timing_config(xmc_norsram_timing_init_type* xmc_rw_timing_struct, + xmc_norsram_timing_init_type* xmc_w_timing_struct) +{ + /* bank1 nor/sram timing register configuration */ + XMC_BANK1->ctrl_tmg_group[xmc_rw_timing_struct->subbank].bk1tmg = + (uint32_t)xmc_rw_timing_struct->addr_setup_time | + (xmc_rw_timing_struct->addr_hold_time << 4) | + (xmc_rw_timing_struct->data_setup_time << 8) | + (xmc_rw_timing_struct->bus_latency_time <<16) | + (xmc_rw_timing_struct->clk_psc << 20) | + (xmc_rw_timing_struct->data_latency_time << 24) | + xmc_rw_timing_struct->mode; + + /* bank1 nor/sram timing register for write configuration, if extended mode is used */ + if(xmc_rw_timing_struct->write_timing_enable == XMC_WRITE_TIMING_ENABLE) + { + XMC_BANK1->tmgwr_group[xmc_w_timing_struct->subbank].bk1tmgwr = + (uint32_t)xmc_w_timing_struct->addr_setup_time | + (xmc_w_timing_struct->addr_hold_time << 4) | + (xmc_w_timing_struct->data_setup_time << 8) | + (xmc_w_timing_struct->bus_latency_time << 16) | + (xmc_w_timing_struct->clk_psc << 20) | + (xmc_w_timing_struct->data_latency_time << 24) | + xmc_w_timing_struct->mode; + } + else + { + XMC_BANK1->tmgwr_group[xmc_w_timing_struct->subbank].bk1tmgwr = 0x0FFFFFFF; + } +} + +/** + * @brief fill each xmc_nor_sram_init_struct member with its default value. + * @param xmc_nor_sram_init_struct: pointer to a xmc_norsram_init_type + * structure which will be initialized. + * @retval none + */ +void xmc_norsram_default_para_init(xmc_norsram_init_type* xmc_nor_sram_init_struct) +{ + /* reset nor/sram init structure parameters values */ + xmc_nor_sram_init_struct->subbank = XMC_BANK1_NOR_SRAM1; + xmc_nor_sram_init_struct->data_addr_multiplex = XMC_DATA_ADDR_MUX_ENABLE; + xmc_nor_sram_init_struct->device = XMC_DEVICE_SRAM; + xmc_nor_sram_init_struct->bus_type = XMC_BUSTYPE_8_BITS; + xmc_nor_sram_init_struct->burst_mode_enable = XMC_BURST_MODE_DISABLE; + xmc_nor_sram_init_struct->asynwait_enable = XMC_ASYN_WAIT_DISABLE; + xmc_nor_sram_init_struct->wait_signal_lv = XMC_WAIT_SIGNAL_LEVEL_LOW; + xmc_nor_sram_init_struct->wrapped_mode_enable = XMC_WRAPPED_MODE_DISABLE; + xmc_nor_sram_init_struct->wait_signal_config = XMC_WAIT_SIGNAL_SYN_BEFORE; + xmc_nor_sram_init_struct->write_enable = XMC_WRITE_OPERATION_ENABLE; + xmc_nor_sram_init_struct->wait_signal_enable = XMC_WAIT_SIGNAL_ENABLE; + xmc_nor_sram_init_struct->write_timing_enable = XMC_WRITE_TIMING_DISABLE; + xmc_nor_sram_init_struct->write_burst_syn = XMC_WRITE_BURST_SYN_DISABLE; +} + +/** + * @brief fill each xmc_rw_timing_struct and xmc_w_timing_struct member with its default value. + * @param xmc_rw_timing_struct: pointer to a xmc_norsram_timing_init_type + * structure which will be initialized. + * @param xmc_w_timing_struct: pointer to a xmc_norsram_timing_init_type + * structure which will be initialized. + * @retval none + */ +void xmc_norsram_timing_default_para_init(xmc_norsram_timing_init_type* xmc_rw_timing_struct, + xmc_norsram_timing_init_type* xmc_w_timing_struct) +{ + xmc_rw_timing_struct->subbank = XMC_BANK1_NOR_SRAM1; + xmc_rw_timing_struct->write_timing_enable = XMC_WRITE_TIMING_DISABLE; + xmc_rw_timing_struct->addr_setup_time = 0xF; + xmc_rw_timing_struct->addr_hold_time = 0xF; + xmc_rw_timing_struct->data_setup_time = 0xFF; + xmc_rw_timing_struct->bus_latency_time = 0xF; + xmc_rw_timing_struct->clk_psc = 0xF; + xmc_rw_timing_struct->data_latency_time = 0xF; + xmc_rw_timing_struct->mode = XMC_ACCESS_MODE_A; + xmc_w_timing_struct->subbank = XMC_BANK1_NOR_SRAM1; + xmc_w_timing_struct->write_timing_enable = XMC_WRITE_TIMING_DISABLE; + xmc_w_timing_struct->addr_setup_time = 0xF; + xmc_w_timing_struct->addr_hold_time = 0xF; + xmc_w_timing_struct->data_setup_time = 0xFF; + xmc_w_timing_struct->bus_latency_time = 0xF; + xmc_w_timing_struct->clk_psc = 0xF; + xmc_w_timing_struct->data_latency_time = 0xF; + xmc_w_timing_struct->mode = XMC_ACCESS_MODE_A; +} + +/** + * @brief enable or disable the specified nor/sram memory bank. + * @param xmc_subbank + * this parameter can be one of the following values: + * - XMC_BANK1_NOR_SRAM1 + * - XMC_BANK1_NOR_SRAM2 + * - XMC_BANK1_NOR_SRAM3 + * - XMC_BANK1_NOR_SRAM4 + * @param new_state (TRUE or FALSE) + * @retval none + */ +void xmc_nor_sram_enable(xmc_nor_sram_subbank_type xmc_subbank, confirm_state new_state) +{ + XMC_BANK1->ctrl_tmg_group[xmc_subbank].bk1ctrl_bit.en = new_state; +} + +/** + * @brief config the bus turnaround phase. + * @param xmc_sub_bank + * this parameter can be one of the following values: + * - XMC_BANK1_NOR_SRAM1 + * - XMC_BANK1_NOR_SRAM2 + * - XMC_BANK1_NOR_SRAM3 + * - XMC_BANK1_NOR_SRAM4 + * @param w2w_timing :write timing + * @param r2r_timing :read timing + * @retval none + */ +void xmc_ext_timing_config(volatile xmc_nor_sram_subbank_type xmc_sub_bank, uint16_t w2w_timing, uint16_t r2r_timing) +{ + XMC_BANK1->ext_bit[xmc_sub_bank].buslatr2r = r2r_timing; + XMC_BANK1->ext_bit[xmc_sub_bank].buslatw2w = w2w_timing; +} + +/** + * @brief xmc nand flash registers reset + * @param xmc_bank + * this parameter can be one of the following values: + * - XMC_BANK2_NAND + * - XMC_BANK3_NAND + * @retval none + */ +void xmc_nand_reset(xmc_class_bank_type xmc_bank) +{ + /* set the xmc_bank2_nand registers to their reset values */ + if(xmc_bank == XMC_BANK2_NAND) + { + XMC_BANK2->bk2ctrl = 0x00000018; + XMC_BANK2->bk2is = 0x00000040; + XMC_BANK2->bk2tmgatt = 0xFCFCFCFC; + XMC_BANK2->bk2tmgmem = 0xFCFCFCFC; + } + /* set the xmc_bank3_nand registers to their reset values */ + else + { + XMC_BANK3->bk3ctrl = 0x00000018; + XMC_BANK3->bk3is = 0x00000040; + XMC_BANK3->bk3tmgatt = 0xFCFCFCFC; + XMC_BANK3->bk3tmgmem = 0xFCFCFCFC; + } +} + +/** + * @brief initialize the xmc nand banks according to the specified + * parameters in the xmc_nandinitstruct. + * @param xmc_nand_init_struct : pointer to a xmc_nand_init_type + * structure that contains the configuration information for the xmc + * nand specified banks. + * @retval none + */ +void xmc_nand_init(xmc_nand_init_type* xmc_nand_init_struct) +{ + uint32_t tempctrl = 0x0; + + /* Set the tempctrl value according to xmc_nand_init_struct parameters */ + tempctrl = (uint32_t)xmc_nand_init_struct->wait_enable | + xmc_nand_init_struct->bus_type | + xmc_nand_init_struct->ecc_enable | + xmc_nand_init_struct->ecc_pagesize | + (xmc_nand_init_struct->delay_time_cycle << 9) | + (xmc_nand_init_struct->delay_time_ar << 13) | + 0x00000008; + + /* xmc_bank2_nand registers configuration */ + if(xmc_nand_init_struct->nand_bank == XMC_BANK2_NAND) + { + XMC_BANK2->bk2ctrl = tempctrl; + } + /* xmc_bank3_nand registers configuration */ + else + { + XMC_BANK3->bk3ctrl = tempctrl; + } +} + +/** + * @brief initialize the xmc nand banks according to the specified + * parameters in the xmc_nandinitstruct. + * @param xmc_regular_spacetiming_struct : pointer to a xmc_nand_pccard_timinginit_type + * structure that contains the configuration information for the xmc + * nand specified banks. + * @param xmc_special_spacetiming_struct : pointer to a xmc_nand_pccard_timinginit_type + * structure that contains the configuration information for the xmc + * nand specified banks. + * @retval none + */ +void xmc_nand_timing_config(xmc_nand_pccard_timinginit_type* xmc_regular_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_special_spacetiming_struct) +{ + uint32_t tempmem = 0x0, tempatt = 0x0; + + /* set the tempmem value according to xmc_nand_init_struct parameters */ + tempmem = (uint32_t)xmc_regular_spacetiming_struct->mem_setup_time | + (xmc_regular_spacetiming_struct->mem_waite_time << 8) | + (xmc_regular_spacetiming_struct->mem_hold_time << 16) | + (xmc_regular_spacetiming_struct->mem_hiz_time << 24); + + /* set the tempatt value according to xmc_nand_init_struct parameters */ + tempatt = (uint32_t)xmc_special_spacetiming_struct->mem_setup_time | + (xmc_special_spacetiming_struct->mem_waite_time << 8) | + (xmc_special_spacetiming_struct->mem_hold_time << 16) | + (xmc_special_spacetiming_struct->mem_hiz_time << 24); + /* xmc_bank2_nand registers configuration */ + if(xmc_regular_spacetiming_struct->class_bank == XMC_BANK2_NAND) + { + XMC_BANK2->bk2tmgatt = tempatt; + XMC_BANK2->bk2tmgmem = tempmem; + } + else + { + XMC_BANK3->bk3tmgatt = tempatt; + XMC_BANK3->bk3tmgmem = tempmem; + } +} + +/** + * @brief fill each xmc_nand_init_struct member with its default value. + * @param xmc_nand_init_struct: pointer to a xmc_nand_init_type + * structure which will be initialized. + * @retval none + */ +void xmc_nand_default_para_init(xmc_nand_init_type* xmc_nand_init_struct) +{ + /* reset nand init structure parameters values */ + xmc_nand_init_struct->nand_bank = XMC_BANK2_NAND; + xmc_nand_init_struct->wait_enable = XMC_WAIT_OPERATION_DISABLE; + xmc_nand_init_struct->bus_type = XMC_BUSTYPE_8_BITS; + xmc_nand_init_struct->ecc_enable = XMC_ECC_OPERATION_DISABLE; + xmc_nand_init_struct->ecc_pagesize = XMC_ECC_PAGESIZE_256_BYTES; + xmc_nand_init_struct->delay_time_cycle = 0x0; + xmc_nand_init_struct->delay_time_ar = 0x0; +} + +/** + * @brief fill each xmc_common_spacetiming_struct and xmc_attribute_spacetiming_struct member with its default value. + * @param xmc_common_spacetiming_struct: pointer to a xmc_nand_pccard_timinginit_type + * structure which will be initialized. + * @param xmc_special_spacetiming_struct: pointer to a xmc_nand_pccard_timinginit_type + * structure which will be initialized. + * @retval none + */ +void xmc_nand_timing_default_para_init(xmc_nand_pccard_timinginit_type* xmc_regular_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_special_spacetiming_struct) +{ + xmc_regular_spacetiming_struct->class_bank = XMC_BANK2_NAND; + xmc_regular_spacetiming_struct->mem_hold_time = 0xFC; + xmc_regular_spacetiming_struct->mem_waite_time = 0xFC; + xmc_regular_spacetiming_struct->mem_setup_time = 0xFC; + xmc_regular_spacetiming_struct->mem_hiz_time = 0xFC; + xmc_special_spacetiming_struct->class_bank = XMC_BANK2_NAND; + xmc_special_spacetiming_struct->mem_hold_time = 0xFC; + xmc_special_spacetiming_struct->mem_waite_time = 0xFC; + xmc_special_spacetiming_struct->mem_setup_time = 0xFC; + xmc_special_spacetiming_struct->mem_hiz_time = 0xFC; +} + +/** + * @brief enable or disable the specified nand memory bank. + * @param xmc_bank: specifies the xmc bank to be used + * this parameter can be one of the following values: + * - XMC_BANK2_NAND + * - XMC_BANK3_NAND + * @param new_state (TRUE or FALSE) + * @retval none + */ +void xmc_nand_enable(xmc_class_bank_type xmc_bank, confirm_state new_state) +{ + /* enable or disable the nand bank2 by setting the en bit in the bk2ctrl register */ + if(xmc_bank == XMC_BANK2_NAND) + { + XMC_BANK2->bk2ctrl_bit.en = new_state; + } + /* enable or disable the nand bank3 by setting the en bit in the bk3ctrl register */ + else + { + XMC_BANK3->bk3ctrl_bit.en = new_state; + } +} + +/** + * @brief enable or disable the xmc nand ecc feature. + * @param xmc_bank: specifies the xmc bank to be used + * this parameter can be one of the following values: + * - XMC_BANK2_NAND + * - XMC_BANK3_NAND + * @param new_state (TRUE or FALSE) + * @retval none + */ +void xmc_nand_ecc_enable(xmc_class_bank_type xmc_bank, confirm_state new_state) +{ + /* enable the selected nand bank2 ecc function by setting the eccen bit in the bk2ctrl register */ + if(xmc_bank == XMC_BANK2_NAND) + { + XMC_BANK2->bk2ctrl_bit.eccen = new_state; + } + /* enable the selected nand bank3 ecc function by setting the eccen bit in the bk3ctrl register */ + else + { + XMC_BANK3->bk3ctrl_bit.eccen = new_state; + } +} + +/** + * @brief return the error correction code register value. + * @param xmc_bank: specifies the xmc bank to be used + * this parameter can be one of the following values: + * - XMC_BANK2_NAND + * - XMC_BANK3_NAND + * @retval the error correction code (ecc) value. + */ +uint32_t xmc_ecc_get(xmc_class_bank_type xmc_bank) +{ + uint32_t eccvaule = 0x0; + + /* get the bk2ecc register value */ + if(xmc_bank == XMC_BANK2_NAND) + { + eccvaule = XMC_BANK2->bk2ecc; + } + /* get the bk3ecc register value */ + else + { + eccvaule = XMC_BANK3->bk3ecc; + } + /* return the error correction code value */ + return eccvaule; +} + +/** + * @brief xmc sdram registers reset + * @param xmc_bank + * this parameter can be one of the following values: + * - XMC_SDRAM_BANK1 + * - XMC_SDRAM_BANK2 + * @retval none + */ +void xmc_sdram_reset(xmc_sdram_bank_type xmc_bank) +{ + XMC_SDRAM->ctrl[xmc_bank] = 0x000002D0; + XMC_SDRAM->tm[xmc_bank] = 0x0FFFFFFF; + XMC_SDRAM->cmd = 0x00000000; + XMC_SDRAM->rcnt = 0x00000000; + XMC_SDRAM->sts = 0x00000000; +} + +/** + * @brief initialize the xmc sdram banks according to the specified + * parameters in the xmc_sdram_init_struct and xmc_sdram_timing_struct. + * @param xmc_sdram_init_struct : pointer to a xmc_sdram_init_type + * structure that contains the configuration information for the xmc + * sdram specified banks. + * @param xmc_sdram_timing_struct : pointer to a xmc_sdram_timing_type + * structure that contains the configuration information for the xmc + * sdram specified banks. + * @retval none + */ +void xmc_sdram_init(xmc_sdram_init_type *xmc_sdram_init_struct, xmc_sdram_timing_type *xmc_sdram_timing_struct) +{ + if(xmc_sdram_init_struct->sdram_bank == XMC_SDRAM_BANK1) + { + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].ca = xmc_sdram_init_struct->column_address; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].ra = xmc_sdram_init_struct->row_address; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].db = xmc_sdram_init_struct->width; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].inbk = xmc_sdram_init_struct->internel_banks; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].cas = xmc_sdram_init_struct->cas; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].wrp = xmc_sdram_init_struct->write_protection; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].bstr = xmc_sdram_init_struct->burst_read; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].rd = xmc_sdram_init_struct->read_delay; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].clkdiv = xmc_sdram_init_struct->clkdiv; + + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].tmrd = xmc_sdram_timing_struct->tmrd; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].txsr = xmc_sdram_timing_struct->txsr; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].tras = xmc_sdram_timing_struct->tras; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].trc = xmc_sdram_timing_struct->trc; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].twr = xmc_sdram_timing_struct->twr; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].trp = xmc_sdram_timing_struct->trp; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].trcd = xmc_sdram_timing_struct->trcd; + } + + if(xmc_sdram_init_struct->sdram_bank == XMC_SDRAM_BANK2) + { + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK2].ca = xmc_sdram_init_struct->column_address; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK2].ra = xmc_sdram_init_struct->row_address; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK2].db = xmc_sdram_init_struct->width; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK2].inbk = xmc_sdram_init_struct->internel_banks; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK2].cas = xmc_sdram_init_struct->cas; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK2].wrp = xmc_sdram_init_struct->write_protection; + /* sdctrl2 bstr is not care */ + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].bstr = xmc_sdram_init_struct->burst_read; + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].rd = xmc_sdram_init_struct->read_delay; + /* sdctrl2 clkdiv is not care */ + XMC_SDRAM->ctrl_bit[XMC_SDRAM_BANK1].clkdiv = xmc_sdram_init_struct->clkdiv; + + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK2].tmrd = xmc_sdram_timing_struct->tmrd; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK2].txsr = xmc_sdram_timing_struct->txsr; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK2].tras = xmc_sdram_timing_struct->tras; + /* sdtm2 trc is not care */ + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].trc = xmc_sdram_timing_struct->trc; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK2].twr = xmc_sdram_timing_struct->twr; + /* sdtm2 trp is not care */ + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK1].trp = xmc_sdram_timing_struct->trp; + XMC_SDRAM->tm_bit[XMC_SDRAM_BANK2].trcd = xmc_sdram_timing_struct->trcd; + } +} + +/** + * @brief fill each xmc_sdram_init_struct member with its default value. + * @param xmc_sdram_init_struct: pointer to a xmc_sdram_init_type + * structure which will be initialized. + * @param xmc_sdram_timing_struct: pointer to a xmc_sdram_timing_type + * structure which will be initialized. + * @retval none + */ +void xmc_sdram_default_para_init(xmc_sdram_init_type *xmc_sdram_init_struct, xmc_sdram_timing_type *xmc_sdram_timing_struct) +{ + /* reset sdram init structure parameters values */ + xmc_sdram_init_struct->sdram_bank = XMC_SDRAM_BANK1; + xmc_sdram_init_struct->internel_banks = XMC_INBK_4; + xmc_sdram_init_struct->clkdiv = XMC_NO_CLK; + xmc_sdram_init_struct->write_protection = FALSE; + xmc_sdram_init_struct->burst_read = FALSE; + xmc_sdram_init_struct->column_address = XMC_COLUMN_8; + xmc_sdram_init_struct->row_address = XMC_ROW_11; + xmc_sdram_init_struct->cas = XMC_CAS_1; + xmc_sdram_init_struct->width = XMC_MEM_WIDTH_8; + xmc_sdram_init_struct->read_delay = XMC_READ_DELAY_1; + + xmc_sdram_timing_struct->tmrd = XMC_DELAY_CYCLE_16; + xmc_sdram_timing_struct->txsr = XMC_DELAY_CYCLE_16; + xmc_sdram_timing_struct->tras = XMC_DELAY_CYCLE_16; + xmc_sdram_timing_struct->trc = XMC_DELAY_CYCLE_16; + xmc_sdram_timing_struct->twr = XMC_DELAY_CYCLE_16; + xmc_sdram_timing_struct->trp = XMC_DELAY_CYCLE_16; + xmc_sdram_timing_struct->trcd = XMC_DELAY_CYCLE_16; +} + +/** + * @brief sdram command confg + * @param xmc_sdram_cmd_struct: pointer to a xmc_sdram_cmd_type + * structure which will be initialized. + * @retval none + */ +void xmc_sdram_cmd(xmc_sdram_cmd_type *xmc_sdram_cmd_struct) +{ + XMC_SDRAM->cmd = (xmc_sdram_cmd_struct->auto_refresh << 5) | + (xmc_sdram_cmd_struct->data << 9) | + xmc_sdram_cmd_struct->cmd | + xmc_sdram_cmd_struct->cmd_banks; +} + + +/** + * @brief get sdram bank status + * @param xmc_bank: specifies the xmc bank to be used + * this parameter can be one of the following values: + * - XMC_SDRAM_BANK1 + * - XMC_SDRAM_BANK1 + * @retval the bank status + */ +uint32_t xmc_sdram_status_get(xmc_sdram_bank_type xmc_bank) +{ + if(xmc_bank == XMC_SDRAM_BANK1) + { + return ((XMC_SDRAM->sts >> 1) & XMC_STATUS_MASK); + } + else + { + return ((XMC_SDRAM->sts >> 3) & XMC_STATUS_MASK); + } +} + +/** + * @brief set sdram refresh counter + * @param counter: xmc sdram refresh counter + * @retval none + */ +void xmc_sdram_refresh_counter_set(uint32_t counter) +{ + XMC_SDRAM->rcnt_bit.rc = counter; +} + +/** + * @brief set sdram auto refresh number + * @param number: xmc sdram auto refresh number + * @retval none + */ +void xmc_sdram_auto_refresh_set(uint32_t number) +{ + XMC_SDRAM->cmd_bit.art = number; +} + +/** + * @brief enable or disable the specified xmc interrupts. + * @param xmc_bank: specifies the xmc bank to be used + * this parameter can be one of the following values: + * - XMC_BANK2_NAND + * - XMC_BANK3_NAND + * - XMC_BANK4_PCCARD + * - XMC_BANK5_6_SDRAM + * @param xmc_int: specifies the xmc interrupt sources to be enabled or disabled. + * this parameter can be any combination of the following values: + * - XMC_INT_RISING_EDGE + * - XMC_INT_LEVEL + * - XMC_INT_FALLING_EDGE + * - XMC_INT_ERR + * @param new_state (TRUE or FALSE) + * @retval none + */ +void xmc_interrupt_enable(xmc_class_bank_type xmc_bank, xmc_interrupt_sources_type xmc_int, confirm_state new_state) +{ + if(new_state != FALSE) + { + /* enable the selected xmc_bank2 interrupts */ + if(xmc_bank == XMC_BANK2_NAND) + { + XMC_BANK2->bk2is |= xmc_int; + } + /* enable the selected xmc_bank3 interrupts */ + else if(xmc_bank == XMC_BANK3_NAND) + { + XMC_BANK3->bk3is |= xmc_int; + } + /* enable the selected xmc_bank4 interrupts */ + else if(xmc_bank == XMC_BANK4_PCCARD) + { + XMC_BANK4->bk4is |= xmc_int; + } + /* enable the selected xmc_sdram interrupts */ + else + { + XMC_SDRAM->rcnt |= xmc_int; + } + } + else + { + /* disable the selected xmc_bank2 interrupts */ + if(xmc_bank == XMC_BANK2_NAND) + { + XMC_BANK2->bk2is &= ~xmc_int; + } + /* disable the selected xmc_bank3 interrupts */ + else if(xmc_bank == XMC_BANK3_NAND) + { + XMC_BANK3->bk3is &= ~xmc_int; + } + /* disable the selected xmc_bank4 interrupts */ + else if(xmc_bank == XMC_BANK4_PCCARD) + { + XMC_BANK4->bk4is &= ~xmc_int; + } + /* disable the selected xmc_sdram interrupts */ + else + { + XMC_SDRAM->rcnt &= ~xmc_int; + } + } +} + +/** + * @brief check whether the specified xmc flag is set or not. + * @param xmc_bank: specifies the xmc bank to be used + * this parameter can be one of the following values: + * - XMC_BANK2_NAND + * - XMC_BANK3_NAND + * - XMC_BANK4_PCCARD + * - XMC_BANK5_6_SDRAM + * @param xmc_flag: specifies the flag to check. + * this parameter can be any combination of the following values: + * - XMC_RISINGEDGE_FLAG + * - XMC_LEVEL_FLAG + * - XMC_FALLINGEDGE_FLAG + * - XMC_FEMPT_FLAG + * - XMC_BUSY_FLAG + * - XMC_ERR_FLAG + * @retval none + */ +flag_status xmc_flag_status_get(xmc_class_bank_type xmc_bank, xmc_interrupt_flag_type xmc_flag) +{ + flag_status status = RESET; + uint32_t temp = 0; + + if(xmc_bank == XMC_BANK2_NAND) + { + temp = XMC_BANK2->bk2is; + } + else if(xmc_bank == XMC_BANK3_NAND) + { + temp = XMC_BANK3->bk3is; + } + else if(xmc_bank == XMC_BANK4_PCCARD) + { + temp = XMC_BANK4->bk4is; + } + else + { + temp = XMC_SDRAM->sts; + } + /* get the flag status */ + if((temp & xmc_flag) == RESET) + { + status = RESET; + } + else + { + status = SET; + } + /* return the flag status */ + return status; +} + +/** + * @brief check whether the specified xmc interrupt flag is set or not. + * @param xmc_bank: specifies the xmc bank to be used + * this parameter can be one of the following values: + * - XMC_BANK2_NAND + * - XMC_BANK3_NAND + * - XMC_BANK4_PCCARD + * @param xmc_flag: specifies the flag to check. + * this parameter can be any combination of the following values: + * - XMC_RISINGEDGE_FLAG + * - XMC_LEVEL_FLAG + * - XMC_FALLINGEDGE_FLAG + * @retval none + */ +flag_status xmc_interrupt_flag_status_get(xmc_class_bank_type xmc_bank, xmc_interrupt_flag_type xmc_flag) +{ + flag_status status = RESET; + + if(xmc_bank == XMC_BANK2_NAND) + { + switch(xmc_flag) + { + case XMC_RISINGEDGE_FLAG: + if(XMC_BANK2->bk2is_bit.reien && XMC_BANK2->bk2is_bit.res) + status = SET; + break; + + case XMC_LEVEL_FLAG: + if(XMC_BANK2->bk2is_bit.feien && XMC_BANK2->bk2is_bit.fes) + status = SET; + break; + + case XMC_FALLINGEDGE_FLAG: + if(XMC_BANK2->bk2is_bit.hlien && XMC_BANK2->bk2is_bit.hls) + status = SET; + break; + + default: + break; + } + } + else if(xmc_bank == XMC_BANK3_NAND) + { + switch(xmc_flag) + { + case XMC_RISINGEDGE_FLAG: + if(XMC_BANK3->bk3is_bit.reien && XMC_BANK3->bk3is_bit.res) + status = SET; + break; + + case XMC_LEVEL_FLAG: + if(XMC_BANK3->bk3is_bit.feien && XMC_BANK3->bk3is_bit.fes) + status = SET; + break; + + case XMC_FALLINGEDGE_FLAG: + if(XMC_BANK3->bk3is_bit.hlien && XMC_BANK3->bk3is_bit.hls) + status = SET; + break; + + default: + break; + } + } + else if(xmc_bank == XMC_BANK4_PCCARD) + { + switch(xmc_flag) + { + case XMC_RISINGEDGE_FLAG: + if(XMC_BANK4->bk4is_bit.reien && XMC_BANK4->bk4is_bit.res) + status = SET; + break; + + case XMC_LEVEL_FLAG: + if(XMC_BANK4->bk4is_bit.feien && XMC_BANK4->bk4is_bit.fes) + status = SET; + break; + + case XMC_FALLINGEDGE_FLAG: + if(XMC_BANK4->bk4is_bit.hlien && XMC_BANK4->bk4is_bit.hls) + status = SET; + break; + + default: + break; + } + } + /* return the flag status */ + return status; +} + +/** + * @brief clear the xmc's pending flags. + * @param xmc_bank: specifies the xmc bank to be used + * this parameter can be one of the following values: + * - XMC_BANK2_NAND + * - XMC_BANK3_NAND + * - XMC_BANK4_PCCARD + * - XMC_BANK5_6_SDRAM + * @param xmc_flag: specifies the flag to check. + * this parameter can be any combination of the following values: + * - XMC_RISINGEDGE_FLAG + * - XMC_LEVEL_FLAG + * - XMC_FALLINGEDGE_FLAG + * - XMC_ERR_FLAG + * @retval none + */ +void xmc_flag_clear(xmc_class_bank_type xmc_bank, xmc_interrupt_flag_type xmc_flag) +{ + __IO uint32_t int_state; + if(xmc_bank == XMC_BANK2_NAND) + { + int_state = XMC_BANK2->bk2is & 0x38; /* keep interrupt state */ + XMC_BANK2->bk2is = (~(xmc_flag | 0x38) | int_state); + } + else if(xmc_bank == XMC_BANK3_NAND) + { + int_state = XMC_BANK3->bk3is & 0x38; /* keep interrupt state */ + XMC_BANK3->bk3is = (~(xmc_flag | 0x38) | int_state); + } + else if(xmc_bank == XMC_BANK4_PCCARD) + { + int_state = XMC_BANK4->bk4is & 0x38; /* keep interrupt state */ + XMC_BANK4->bk4is = (~(xmc_flag | 0x38) | int_state); + } + else + { + XMC_SDRAM->rcnt |= xmc_flag; + } +} + +/** + * @brief xmc pc card registers reset + * @param none + * @retval none + */ +void xmc_pccard_reset(void) +{ + /* Set the XMC_Bank4 registers to their reset values */ + XMC_BANK4->bk4ctrl = 0x00000018; + XMC_BANK4->bk4is = 0x00000000; + XMC_BANK4->bk4tmgatt = 0xFCFCFCFC; + XMC_BANK4->bk4tmgio = 0xFCFCFCFC; + XMC_BANK4->bk4tmgmem = 0xFCFCFCFC; +} + +/** + * @brief initialize the xmc pccard bank according to the specified + * parameters in the xmc_pccard_init_struct. + * @param xmc_pccard_init_struct : pointer to a xmc_pccard_init_type + * structure that contains the configuration information for the xmc + * pccard bank. + * @retval none + */ +void xmc_pccard_init(xmc_pccard_init_type* xmc_pccard_init_struct) +{ + /* set the bk4ctrl register value according to xmc_pccard_init_struct parameters */ + XMC_BANK4->bk4ctrl = (uint32_t)xmc_pccard_init_struct->enable_wait | + XMC_BUSTYPE_16_BITS | + (xmc_pccard_init_struct->delay_time_cr << 9) | + (xmc_pccard_init_struct->delay_time_ar << 13); +} + +/** + * @brief initialize the xmc pccard bank according to the specified + * parameters in the xmc_common_spacetiming_struct/xmc_attribute_spacetiming_struct + * and xmc_iospace_timing_struct. + * @param xmc_regular_spacetiming_struct : pointer to a xmc_pccard_init_type + * structure that contains the configuration information for the xmc + * pccard bank. + * @param xmc_special_spacetiming_struct : pointer to a xmc_pccard_init_type + * structure that contains the configuration information for the xmc + * pccard bank. + * @param xmc_iospace_timing_struct : pointer to a xmc_pccard_init_type + * structure that contains the configuration information for the xmc + * pccard bank. + * @retval none + */ +void xmc_pccard_timing_config(xmc_nand_pccard_timinginit_type* xmc_regular_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_special_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_iospace_timing_struct) +{ + /* set bk4tmgmem register value according to xmc_regular_spacetiming_struct parameters */ + XMC_BANK4->bk4tmgmem = (uint32_t)xmc_regular_spacetiming_struct->mem_setup_time | + (xmc_regular_spacetiming_struct->mem_waite_time << 8) | + (xmc_regular_spacetiming_struct->mem_hold_time << 16) | + (xmc_regular_spacetiming_struct->mem_hiz_time << 24); + + /* Set bk4tmgatt register value according to xmc_special_spacetiming_struct parameters */ + XMC_BANK4->bk4tmgatt = (uint32_t)xmc_special_spacetiming_struct->mem_setup_time | + (xmc_special_spacetiming_struct->mem_waite_time << 8) | + (xmc_special_spacetiming_struct->mem_hold_time << 16) | + (xmc_special_spacetiming_struct->mem_hiz_time << 24); + + /* Set bk4tmgio register value according to xmc_iospace_timing_struct parameters */ + XMC_BANK4->bk4tmgio = (uint32_t)xmc_iospace_timing_struct->mem_setup_time | + (xmc_iospace_timing_struct->mem_waite_time << 8) | + (xmc_iospace_timing_struct->mem_hold_time << 16) | + (xmc_iospace_timing_struct->mem_hiz_time << 24); +} +/** + * @brief fill each xmc_pccard_init_struct member with its default value. + * @param xmc_pccard_init_struct: pointer to a xmc_pccardinittype + * structure which will be initialized. + * @retval none + */ +void xmc_pccard_default_para_init(xmc_pccard_init_type* xmc_pccard_init_struct) +{ + /* reset pccard init structure parameters values */ + xmc_pccard_init_struct->enable_wait = XMC_WAIT_OPERATION_DISABLE; + xmc_pccard_init_struct->delay_time_ar = 0x0; + xmc_pccard_init_struct->delay_time_cr = 0x0; + +} +/** + * @brief fill each xmc_common_spacetiming_struct/xmc_attribute_spacetiming_struct + * and xmc_iospace_timing_struct member with its default value. + * @param xmc_regular_spacetiming_struct : pointer to a xmc_pccard_init_type + * structure that contains the configuration information for the xmc + * pccard bank. + * @param xmc_special_spacetiming_struct : pointer to a xmc_pccard_init_type + * structure that contains the configuration information for the xmc + * pccard bank. + * @param xmc_iospace_timing_struct : pointer to a xmc_pccard_init_type + * structure that contains the configuration information for the xmc + * pccard bank. + * @retval none + */ +void xmc_pccard_timing_default_para_init(xmc_nand_pccard_timinginit_type* xmc_regular_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_special_spacetiming_struct, + xmc_nand_pccard_timinginit_type* xmc_iospace_timing_struct) +{ + xmc_regular_spacetiming_struct->class_bank = XMC_BANK4_PCCARD; + xmc_regular_spacetiming_struct->mem_hold_time = 0xFC; + xmc_regular_spacetiming_struct->mem_waite_time = 0xFC; + xmc_regular_spacetiming_struct->mem_setup_time = 0xFC; + xmc_regular_spacetiming_struct->mem_hiz_time = 0xFC; + xmc_special_spacetiming_struct->class_bank = XMC_BANK4_PCCARD; + xmc_special_spacetiming_struct->mem_hold_time = 0xFC; + xmc_special_spacetiming_struct->mem_waite_time = 0xFC; + xmc_special_spacetiming_struct->mem_setup_time = 0xFC; + xmc_special_spacetiming_struct->mem_hiz_time = 0xFC; + xmc_iospace_timing_struct->class_bank = XMC_BANK4_PCCARD; + xmc_iospace_timing_struct->mem_hold_time = 0xFC; + xmc_iospace_timing_struct->mem_waite_time = 0xFC; + xmc_iospace_timing_struct->mem_setup_time = 0xFC; + xmc_iospace_timing_struct->mem_hiz_time = 0xFC; +} +/** + * @brief enable or disable the pccard memory bank. + * @param new_state (TRUE or FALSE) + * @retval none + */ +void xmc_pccard_enable(confirm_state new_state) +{ + /* enable the pccard bank4 by setting the en bit in the bk4ctrl register */ + XMC_BANK4->bk4ctrl_bit.en = new_state; +} + +/** + * @} + */ + +#endif + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_usb/usb_conf.h b/armlib/at32_usb/usb_conf.h new file mode 100644 index 000000000..041031e34 --- /dev/null +++ b/armlib/at32_usb/usb_conf.h @@ -0,0 +1,225 @@ +/** + ************************************************************************** + * @file usb_conf.h + * @brief usb config header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_CONF_H +#define __USB_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "at32f435_437_usb.h" +#include "at32f435_437.h" + +#ifndef USBD_SUPPORT_WINUSB // Fix 'error: "USBD_SUPPORT_WINUSB" is not defined, evaluates to 0' +#define USBD_SUPPORT_WINUSB 0 +#endif + +#ifndef NULL +#define NULL ((void*)0) +#endif + +/** @addtogroup AT32F435_periph_examples + * @{ + */ + +/** @addtogroup 435_USB_device_vcp_loopback + * @{ + */ + +/** + * @brief enable usb device mode + */ +#define USE_OTG_DEVICE_MODE + +/** + * @brief enable usb host mode + */ +/* #define USE_OTG_HOST_MODE */ + +/** + * @brief select otgfs1 or otgfs2 define + */ + +/* use otgfs1 */ +// #define OTG_USB_ID 1 + +/* use otgfs2 */ +#define OTG_USB_ID 2 // USB2 仅UFP 只从机 默认5v输入 无输出 + +#if (OTG_USB_ID == 1) +#define USB_ID 0 +#define OTG_CLOCK CRM_OTGFS1_PERIPH_CLOCK +#define OTG_IRQ OTGFS1_IRQn +#define OTG_IRQ_HANDLER OTGFS1_IRQHandler +#define OTG_WKUP_IRQ OTGFS1_WKUP_IRQn +#define OTG_WKUP_HANDLER OTGFS1_WKUP_IRQHandler +#define OTG_WKUP_EXINT_LINE EXINT_LINE_18 + +#define OTG_PIN_GPIO GPIOA +#define OTG_PIN_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK + +#define OTG_PIN_DP GPIO_PINS_12 +#define OTG_PIN_DP_SOURCE GPIO_PINS_SOURCE12 + +#define OTG_PIN_DM GPIO_PINS_11 +#define OTG_PIN_DM_SOURCE GPIO_PINS_SOURCE11 + +#define OTG_PIN_VBUS GPIO_PINS_9 +#define OTG_PIN_VBUS_SOURCE GPIO_PINS_SOURCE9 + +#define OTG_PIN_ID GPIO_PINS_10 +#define OTG_PIN_ID_SOURCE GPIO_PINS_SOURCE10 + +#define OTG_PIN_SOF_GPIO GPIOA +#define OTG_PIN_SOF_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK +#define OTG_PIN_SOF GPIO_PINS_8 +#define OTG_PIN_SOF_SOURCE GPIO_PINS_SOURCE8 + +#define OTG_PIN_MUX GPIO_MUX_10 +#endif + +#if (OTG_USB_ID == 2) +#define USB_ID 1 +#define OTG_CLOCK CRM_OTGFS2_PERIPH_CLOCK +#define OTG_IRQ OTGFS2_IRQn +#define OTG_IRQ_HANDLER OTGFS2_IRQHandler +#define OTG_WKUP_IRQ OTGFS2_WKUP_IRQn +#define OTG_WKUP_HANDLER OTGFS2_WKUP_IRQHandler +#define OTG_WKUP_EXINT_LINE EXINT_LINE_20 + +#define OTG_PIN_GPIO GPIOB +#define OTG_PIN_GPIO_CLOCK CRM_GPIOB_PERIPH_CLOCK + +#define OTG_PIN_DP GPIO_PINS_15 +#define OTG_PIN_DP_SOURCE GPIO_PINS_SOURCE15 + +#define OTG_PIN_DM GPIO_PINS_14 +#define OTG_PIN_DM_SOURCE GPIO_PINS_SOURCE14 + +#define OTG_PIN_VBUS GPIO_PINS_13 +#define OTG_PIN_VBUS_SOURCE GPIO_PINS_SOURCE13 + +#define OTG_PIN_ID GPIO_PINS_12 +#define OTG_PIN_ID_SOURCE GPIO_PINS_SOURCE12 + +#define OTG_PIN_SOF_GPIO GPIOA +#define OTG_PIN_SOF_GPIO_CLOCK CRM_GPIOA_PERIPH_CLOCK +#define OTG_PIN_SOF GPIO_PINS_4 +#define OTG_PIN_SOF_SOURCE GPIO_PINS_SOURCE4 + +#define OTG_PIN_MUX GPIO_MUX_12 +#endif + +/** + * @brief usb device mode config + */ +#ifdef USE_OTG_DEVICE_MODE +/** + * @brief usb device mode fifo + */ +/* otg1 device fifo */ +#define USBD_RX_SIZE 128 +#define USBD_EP0_TX_SIZE 24 +#define USBD_EP1_TX_SIZE 20 +#define USBD_EP2_TX_SIZE 20 +#define USBD_EP3_TX_SIZE 20 +#define USBD_EP4_TX_SIZE 20 +#define USBD_EP5_TX_SIZE 20 +#define USBD_EP6_TX_SIZE 20 +#define USBD_EP7_TX_SIZE 20 + +/* otg2 device fifo */ +#define USBD2_RX_SIZE 128 +#define USBD2_EP0_TX_SIZE 24 +#define USBD2_EP1_TX_SIZE 20 +#define USBD2_EP2_TX_SIZE 20 +#define USBD2_EP3_TX_SIZE 20 +#define USBD2_EP4_TX_SIZE 20 +#define USBD2_EP5_TX_SIZE 20 +#define USBD2_EP6_TX_SIZE 20 +#define USBD2_EP7_TX_SIZE 20 + +/** + * @brief usb endpoint max num define + */ +#ifndef USB_EPT_MAX_NUM +#define USB_EPT_MAX_NUM 8 +#endif +#endif + +/** + * @brief usb host mode config + */ +#ifdef USE_OTG_HOST_MODE +#ifndef USB_HOST_CHANNEL_NUM +#define USB_HOST_CHANNEL_NUM 16 +#endif + +/** + * @brief usb host mode fifo + */ +/* otg1 host fifo */ +#define USBH_RX_FIFO_SIZE 128 +#define USBH_NP_TX_FIFO_SIZE 96 +#define USBH_P_TX_FIFO_SIZE 96 + +/* otg2 host fifo */ +#define USBH2_RX_FIFO_SIZE 128 +#define USBH2_NP_TX_FIFO_SIZE 96 +#define USBH2_P_TX_FIFO_SIZE 96 +#endif + +/** + * @brief usb sof output enable + */ +/* #define USB_SOF_OUTPUT_ENABLE */ + +/** + * @brief usb vbus ignore, not use vbus pin + */ +#define USB_VBUS_IGNORE + +/** + * @brief usb low power wakeup handler enable + */ +/* #define USB_LOW_POWER_WAKUP */ + +void usb_delay_ms(uint32_t ms); + +// void usb_delay_us(uint32_t us); unused + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_usb/usb_drivers/inc/usb_core.h b/armlib/at32_usb/usb_drivers/inc/usb_core.h new file mode 100644 index 000000000..e28f8725c --- /dev/null +++ b/armlib/at32_usb/usb_drivers/inc/usb_core.h @@ -0,0 +1,134 @@ +/** + ************************************************************************** + * @file usb_core.h + * @brief usb core header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_CORE_H +#define __USB_CORE_H + +#ifdef __cplusplus +extern "C" { +#endif + + +#include "usb_std.h" +#include "usb_conf.h" + +#ifdef USE_OTG_DEVICE_MODE +#include "usbd_core.h" +#endif +#ifdef USE_OTG_HOST_MODE +#include "usbh_core.h" +#endif + +/** @addtogroup AT32F435_437_middlewares_usb_drivers + * @{ + */ + +/** @addtogroup USB_drivers_core + * @{ + */ + +/** @defgroup USB_core_exported_types + * @{ + */ + +/** + * @brief usb core speed select + */ +typedef enum +{ + USB_LOW_SPEED_CORE_ID, /*!< usb low speed core id */ + USB_FULL_SPEED_CORE_ID, /*!< usb full speed core id */ + USB_HIGH_SPEED_CORE_ID, /*!< usb high speed core id */ +} usb_speed_type; + +/** + * @brief usb core cofig struct + */ +typedef struct +{ + uint8_t speed; /*!< otg speed */ + uint8_t dma_en; /*!< dma enable state, not use*/ + uint8_t hc_num; /*!< the otg host support number of channel */ + uint8_t ept_num; /*!< the otg device support number of endpoint */ + + uint16_t max_size; /*!< support max packet size */ + uint16_t fifo_size; /*!< the usb otg total file size */ + uint8_t phy_itface; /*!< usb phy select */ + uint8_t core_id; /*!< the usb otg core id */ + uint8_t low_power; /*!< the usb otg low power option */ + uint8_t sof_out; /*!< the sof signal output */ + uint8_t usb_id; /*!< select otgfs1 or otgfs2 */ + uint8_t vbusig; /*!< vbus ignore */ +} usb_core_cfg; + +/** + * @brief usb otg core struct type + */ +typedef struct +{ + usb_reg_type *usb_reg; /*!< the usb otg register type */ +#ifdef USE_OTG_DEVICE_MODE + usbd_core_type dev; /*!< the usb device core type */ +#endif + +#ifdef USE_OTG_HOST_MODE + usbh_core_type host; /*!< the usb host core type */ +#endif + + usb_core_cfg cfg; /*!< the usb otg core config type */ + +} otg_core_type; + +usb_sts_type usb_core_config(otg_core_type *otgdev, uint8_t core_id); +#ifdef USE_OTG_DEVICE_MODE +usb_sts_type usbd_init(otg_core_type *udev, + uint8_t core_id, uint8_t usb_id, + usbd_class_handler *class_handler, + usbd_desc_handler *desc_handler); +#endif + +#ifdef USE_OTG_HOST_MODE +usb_sts_type usbh_init(otg_core_type *hdev, + uint8_t core_id, uint8_t usb_id, + usbh_class_handler_type *class_handler, + usbh_user_handler_type *user_handler); +#endif +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/armlib/at32_usb/usb_drivers/inc/usb_std.h b/armlib/at32_usb/usb_drivers/inc/usb_std.h new file mode 100644 index 000000000..f689e27ad --- /dev/null +++ b/armlib/at32_usb/usb_drivers/inc/usb_std.h @@ -0,0 +1,395 @@ +/** + ************************************************************************** + * @file usb_std.h + * @brief usb standard header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_STD_H +#define __USB_STD_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "usb_conf.h" + +/** @addtogroup AT32F435_437_middlewares_usb_drivers + * @{ + */ + +/** @addtogroup USB_standard + * @{ + */ + +/** @defgroup USB_standard_define + * @{ + */ + +/** + * @brief usb request recipient + */ +#define USB_REQ_RECIPIENT_DEVICE 0x00 /*!< usb request recipient device */ +#define USB_REQ_RECIPIENT_INTERFACE 0x01 /*!< usb request recipient interface */ +#define USB_REQ_RECIPIENT_ENDPOINT 0x02 /*!< usb request recipient endpoint */ +#define USB_REQ_RECIPIENT_OTHER 0x03 /*!< usb request recipient other */ +#define USB_REQ_RECIPIENT_MASK 0x1F /*!< usb request recipient mask */ + +/** + * @brief usb request type + */ +#define USB_REQ_TYPE_STANDARD 0x00 /*!< usb request type standard */ +#define USB_REQ_TYPE_CLASS 0x20 /*!< usb request type class */ +#define USB_REQ_TYPE_VENDOR 0x40 /*!< usb request type vendor */ +#define USB_REQ_TYPE_RESERVED 0x60 /*!< usb request type reserved */ + +/** + * @brief usb request data transfer direction + */ +#define USB_REQ_DIR_HTD 0x00 /*!< usb request data transfer direction host to device */ +#define USB_REQ_DIR_DTH 0x80 /*!< usb request data transfer direction device to host */ + +/** + * @brief usb standard device requests codes + */ +#define USB_STD_REQ_GET_STATUS 0 /*!< usb request code status */ +#define USB_STD_REQ_CLEAR_FEATURE 1 /*!< usb request code clear feature */ +#define USB_STD_REQ_SET_FEATURE 3 /*!< usb request code feature */ +#define USB_STD_REQ_SET_ADDRESS 5 /*!< usb request code address */ +#define USB_STD_REQ_GET_DESCRIPTOR 6 /*!< usb request code get descriptor */ +#define USB_STD_REQ_SET_DESCRIPTOR 7 /*!< usb request code set descriptor */ +#define USB_STD_REQ_GET_CONFIGURATION 8 /*!< usb request code get configuration */ +#define USB_STD_REQ_SET_CONFIGURATION 9 /*!< usb request code set configuration */ +#define USB_STD_REQ_GET_INTERFACE 10 /*!< usb request code get interface */ +#define USB_STD_REQ_SET_INTERFACE 11 /*!< usb request code set interface */ +#define USB_STD_REQ_SYNCH_FRAME 12 /*!< usb request code synch frame */ + +/** + * @brief usb standard device type + */ +#define USB_DESCIPTOR_TYPE_DEVICE 1 /*!< usb standard device type device */ +#define USB_DESCIPTOR_TYPE_CONFIGURATION 2 /*!< usb standard device type configuration */ +#define USB_DESCIPTOR_TYPE_STRING 3 /*!< usb standard device type string */ +#define USB_DESCIPTOR_TYPE_INTERFACE 4 /*!< usb standard device type interface */ +#define USB_DESCIPTOR_TYPE_ENDPOINT 5 /*!< usb standard device type endpoint */ +#define USB_DESCIPTOR_TYPE_DEVICE_QUALIFIER 6 /*!< usb standard device type qualifier */ +#define USB_DESCIPTOR_TYPE_OTHER_SPEED 7 /*!< usb standard device type other speed */ +#define USB_DESCIPTOR_TYPE_INTERFACE_POWER 8 /*!< usb standard device type interface power */ + +/** + * @brief usb standard string type + */ +#define USB_LANGID_STRING 0 /*!< usb standard string type lang id */ +#define USB_MFC_STRING 1 /*!< usb standard string type mfc */ +#define USB_PRODUCT_STRING 2 /*!< usb standard string type product */ +#define USB_SERIAL_STRING 3 /*!< usb standard string type serial */ +#define USB_CONFIG_STRING 4 /*!< usb standard string type config */ +#define USB_INTERFACE_STRING 5 /*!< usb standard string type interface */ +#define USB_WINUSB_OS_STRING 0xEE /*!< usb microsoft os string */ + +/** + * @brief usb configuration attributes + */ +#define USB_CONF_REMOTE_WAKEUP 2 /*!< usb configuration attributes remote wakeup */ +#define USB_CONF_SELF_POWERED 1 /*!< usb configuration attributes self powered */ + +/** + * @brief usb standard feature selectors + */ +#define USB_FEATURE_EPT_HALT 0 /*!< usb standard feature selectors endpoint halt */ +#define USB_FEATURE_REMOTE_WAKEUP 1 /*!< usb standard feature selectors remote wakeup */ +#define USB_FEATURE_TEST_MODE 2 /*!< usb standard feature selectors test mode */ + +/** + * @brief usb winusb feature id + */ +#define USB_WINUSB_COMPAT_ID 0x04 /*!< usb winusb compat id os descriptor */ +#define USB_WINUSB_PROPERTIES_ID 0x05 /*!< usb winusb properties id os descriptor */ + +/** + * @brief usb device connect state + */ +typedef enum +{ + USB_CONN_STATE_DEFAULT =1, /*!< usb device connect state default */ + USB_CONN_STATE_ADDRESSED, /*!< usb device connect state address */ + USB_CONN_STATE_CONFIGURED, /*!< usb device connect state configured */ + USB_CONN_STATE_SUSPENDED /*!< usb device connect state suspend */ +}usbd_conn_state; + +/** + * @brief endpoint 0 state + */ +#define USB_EPT0_IDLE 0 /*!< usb endpoint state idle */ +#define USB_EPT0_SETUP 1 /*!< usb endpoint state setup */ +#define USB_EPT0_DATA_IN 2 /*!< usb endpoint state data in */ +#define USB_EPT0_DATA_OUT 3 /*!< usb endpoint state data out */ +#define USB_EPT0_STATUS_IN 4 /*!< usb endpoint state status in */ +#define USB_EPT0_STATUS_OUT 5 /*!< usb endpoint state status out */ +#define USB_EPT0_STALL 6 /*!< usb endpoint state stall */ + +/** + * @brief usb descriptor length + */ +#define USB_DEVICE_QUALIFIER_DESC_LEN 0x0A /*!< usb qualifier descriptor length */ +#define USB_DEVICE_DESC_LEN 0x12 /*!< usb device descriptor length */ +#define USB_DEVICE_CFG_DESC_LEN 0x09 /*!< usb configuration descriptor length */ +#define USB_DEVICE_IF_DESC_LEN 0x09 /*!< usb interface descriptor length */ +#define USB_DEVICE_EPT_LEN 0x07 /*!< usb endpoint descriptor length */ +#define USB_DEVICE_OTG_DESC_LEN 0x03 /*!< usb otg descriptor length */ +#define USB_DEVICE_LANGID_STR_DESC_LEN 0x04 /*!< usb lang id string descriptor length */ +#define USB_DEVICE_OTHER_SPEED_DESC_SIZ_LEN 0x09 /*!< usb other speed descriptor length */ + +/** + * @brief usb class code + */ +#define USB_CLASS_CODE_AUDIO 0x01 /*!< usb class code audio */ +#define USB_CLASS_CODE_CDC 0x02 /*!< usb class code cdc */ +#define USB_CLASS_CODE_HID 0x03 /*!< usb class code hid */ +#define USB_CLASS_CODE_PRINTER 0x07 /*!< usb class code printer */ +#define USB_CLASS_CODE_MSC 0x08 /*!< usb class code msc */ +#define USB_CLASS_CODE_HUB 0x09 /*!< usb class code hub */ +#define USB_CLASS_CODE_CDCDATA 0x0A /*!< usb class code cdc data */ +#define USB_CLASS_CODE_CCID 0x0B /*!< usb class code ccid */ +#define USB_CLASS_CODE_VIDEO 0x0E /*!< usb class code video */ +#define USB_CLASS_CODE_VENDOR 0xFF /*!< usb class code vendor */ + +/** + * @brief usb endpoint type + */ +#define USB_EPT_DESC_CONTROL 0x00 /*!< usb endpoint description type control */ +#define USB_EPT_DESC_ISO 0x01 /*!< usb endpoint description type iso */ +#define USB_EPT_DESC_BULK 0x02 /*!< usb endpoint description type bulk */ +#define USB_EPT_DESC_INTERRUPT 0x03 /*!< usb endpoint description type interrupt */ + +#define USB_EPT_DESC_NSYNC 0x00 /*!< usb endpoint description nsync */ +#define USB_ETP_DESC_ASYNC 0x04 /*!< usb endpoint description async */ +#define USB_ETP_DESC_ADAPTIVE 0x08 /*!< usb endpoint description adaptive */ +#define USB_ETP_DESC_SYNC 0x0C /*!< usb endpoint description sync */ + +#define USB_EPT_DESC_DATA_EPT 0x00 /*!< usb endpoint description data */ +#define USB_EPT_DESC_FD_EPT 0x10 /*!< usb endpoint description fd */ +#define USB_EPT_DESC_FDDATA_EPT 0x20 /*!< usb endpoint description fddata */ + +/** + * @brief usb cdc class descriptor define + */ +#define USBD_CDC_CS_INTERFACE 0x24 +#define USBD_CDC_CS_ENDPOINT 0x25 + +/** + * @brief usb cdc class sub-type define + */ +#define USBD_CDC_SUBTYPE_HEADER 0x00 +#define USBD_CDC_SUBTYPE_CMF 0x01 +#define USBD_CDC_SUBTYPE_ACM 0x02 +#define USBD_CDC_SUBTYPE_UFD 0x06 + +/** + * @brief usb cdc class request code define + */ +#define SET_LINE_CODING 0x20 +#define GET_LINE_CODING 0x21 + +/** + * @brief usb cdc class set line coding struct + */ +typedef struct +{ + uint32_t bitrate; /* line coding baud rate */ + uint8_t format; /* line coding foramt */ + uint8_t parity; /* line coding parity */ + uint8_t data; /* line coding data bit */ +}linecoding_type; + +/** + * @brief usb hid class descriptor define + */ +#define HID_CLASS_DESC_HID 0x21 +#define HID_CLASS_DESC_REPORT 0x22 +#define HID_CLASS_DESC_PHYSICAL 0x23 + +/** + * @brief usb hid class request code define + */ +#define HID_REQ_SET_PROTOCOL 0x0B +#define HID_REQ_GET_PROTOCOL 0x03 +#define HID_REQ_SET_IDLE 0x0A +#define HID_REQ_GET_IDLE 0x02 +#define HID_REQ_SET_REPORT 0x09 +#define HID_REQ_GET_REPORT 0x01 +#define HID_DESCRIPTOR_TYPE 0x21 +#define HID_REPORT_DESC 0x22 + +/** + * @brief endpoint 0 max size + */ +#define USB_MAX_EP0_SIZE 64 /*!< usb endpoint 0 max size */ + +/** + * @brief usb swap address + */ +#define SWAPBYTE(addr) (uint16_t)(((uint16_t)(*((uint8_t *)(addr)))) + \ + (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8)) /*!< swap address */ + +/** + * @brief min and max define + */ +#ifndef MIN +#define MIN(a, b) (uint16_t)(((a) < (b)) ? (a) : (b)) /*!< min define*/ +#endif + +#ifndef MAX +#define MAX(a, b) (uint16_t)(((a) > (b)) ? (a) : (b)) /*!< max define*/ +#endif + +/** + * @brief low byte and high byte define + */ +#define LBYTE(x) ((uint8_t)(x & 0x00FF)) /*!< low byte define */ +#define HBYTE(x) ((uint8_t)((x & 0xFF00) >>8)) /*!< high byte define*/ + +/** + * @brief usb return status + */ +typedef enum +{ + USB_OK, /*!< usb status ok */ + USB_FAIL, /*!< usb status fail */ + USB_WAIT, /*!< usb status wait */ + USB_NOT_SUPPORT, /*!< usb status not support */ + USB_ERROR, /*!< usb status error */ +}usb_sts_type; + + +/** + * @brief format of usb setup data + */ +typedef struct +{ + uint8_t bmRequestType; /*!< characteristics of request */ + uint8_t bRequest; /*!< specific request */ + uint16_t wValue; /*!< word-sized field that varies according to request */ + uint16_t wIndex; /*!< word-sized field that varies according to request + typically used to pass an index or offset */ + uint16_t wLength; /*!< number of bytes to transfer if there is a data stage */ +} usb_setup_type; + +/** + * @brief format of standard device descriptor + */ +typedef struct +{ + uint8_t bLength; /*!< size of this descriptor in bytes */ + uint8_t bDescriptorType; /*!< device descriptor type */ + uint16_t bcdUSB; /*!< usb specification release number */ + uint8_t bDeviceClass; /*!< class code (assigned by the usb-if) */ + uint8_t bDeviceSubClass; /*!< subclass code (assigned by the usb-if) */ + uint8_t bDeviceProtocol; /*!< protocol code ((assigned by the usb-if)) */ + uint8_t bMaxPacketSize0; /*!< maximum packet size for endpoint zero */ + uint16_t idVendor; /*!< verndor id ((assigned by the usb-if)) */ + uint16_t idProduct; /*!< product id ((assigned by the usb-if)) */ + uint16_t bcdDevice; /*!< device release number in binary-coded decimal */ + uint8_t iManufacturer; /*!< index of string descriptor describing manufacturer */ + uint8_t iProduct; /*!< index of string descriptor describing product */ + uint8_t iSerialNumber; /*!< index of string descriptor describing serial number */ + uint8_t bNumConfigurations; /*!< number of possible configurations */ +} usb_device_desc_type; + +/** + * @brief format of standard configuration descriptor + */ +typedef struct +{ + uint8_t bLength; /*!< size of this descriptor in bytes */ + uint8_t bDescriptorType; /*!< configuration descriptor type */ + uint16_t wTotalLength; /*!< total length of data returned for this configuration */ + uint8_t bNumInterfaces; /*!< number of interfaces supported by this configuration */ + uint8_t bConfigurationValue; /*!< value to use as an argument to the SetConfiguration() request */ + uint8_t iConfiguration; /*!< index of string descriptor describing this configuration */ + uint8_t bmAttributes; /*!< configuration characteristics + D7 reserved + D6 self-powered + D5 remote wakeup + D4~D0 reserved */ + uint8_t bMaxPower; /*!< maximum power consumption of the usb device from the bus */ + + +}usb_configuration_desc_type; + +/** + * @brief format of standard interface descriptor + */ +typedef struct +{ + uint8_t bLength; /*!< size of this descriptor in bytes */ + uint8_t bDescriptorType; /*!< interface descriptor type */ + uint8_t bInterfaceNumber; /*!< number of this interface */ + uint8_t bAlternateSetting; /*!< value used to select this alternate setting for the interface */ + uint8_t bNumEndpoints; /*!< number of endpoints used by this interface */ + uint8_t bInterfaceClass; /*!< class code (assigned by the usb-if) */ + uint8_t bInterfaceSubClass; /*!< subclass code (assigned by the usb-if) */ + uint8_t bInterfaceProtocol; /*!< protocol code (assigned by the usb-if) */ + uint8_t iInterface; /*!< index of string descriptor describing this interface */ +} usb_interface_desc_type; + +/** + * @brief format of standard endpoint descriptor + */ +typedef struct +{ + uint8_t bLength; /*!< size of this descriptor in bytes */ + uint8_t bDescriptorType; /*!< endpoint descriptor type */ + uint8_t bEndpointAddress; /*!< the address of the endpoint on the usb device described by this descriptor */ + uint8_t bmAttributes; /*!< describes the endpoints attributes when it is configured using bConfiguration value */ + uint16_t wMaxPacketSize; /*!< maximum packet size this endpoint */ + uint8_t bInterval; /*!< interval for polling endpoint for data transfers */ +} usb_endpoint_desc_type; + +/** + * @brief format of header + */ +typedef struct +{ + uint8_t bLength; /*!< size of this descriptor in bytes */ + uint8_t bDescriptorType; /*!< descriptor type */ +} usb_header_desc_type; + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/armlib/at32_usb/usb_drivers/inc/usbd_core.h b/armlib/at32_usb/usb_drivers/inc/usbd_core.h new file mode 100644 index 000000000..ce6beba31 --- /dev/null +++ b/armlib/at32_usb/usb_drivers/inc/usbd_core.h @@ -0,0 +1,212 @@ +/** + ************************************************************************** + * @file usbd_core.h + * @brief usb device core header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CORE_H +#define __USBD_CORE_H + +#ifdef __cplusplus +extern "C" { + +#endif + + +#include "usb_conf.h" +#include "usb_std.h" + +/** @addtogroup AT32F435_437_middlewares_usbd_drivers + * @{ + */ + +/** @addtogroup USBD_drivers_core + * @{ + */ + +/** @defgroup USBD_core_exported_types + * @{ + */ + +#ifdef USE_OTG_DEVICE_MODE + +/** + * @brief usb device event + */ +typedef enum { + USBD_NOP_EVENT, /*!< usb device nop event */ + USBD_RESET_EVENT, /*!< usb device reset event */ + USBD_SUSPEND_EVENT, /*!< usb device suspend event */ + USBD_WAKEUP_EVENT, /*!< usb device wakeup event */ + USBD_DISCONNECT_EVNET, /*!< usb device disconnect event */ + USBD_INISOINCOM_EVENT, /*!< usb device inisoincom event */ + USBD_OUTISOINCOM_EVENT, /*!< usb device outisoincom event */ + USBD_ERR_EVENT /*!< usb device error event */ +} usbd_event_type; + +/** + * @brief usb device descriptor struct + */ +typedef struct { + uint16_t length; /*!< descriptor length */ + uint8_t *descriptor; /*!< descriptor string */ +} usbd_desc_t; + +/** + * @brief usb device descriptor handler + */ +typedef struct { + usbd_desc_t *(*get_device_descriptor)(void); /*!< get device descriptor callback */ + usbd_desc_t *(*get_device_qualifier)(void); /*!< get device qualifier callback */ + usbd_desc_t *(*get_device_configuration)(void); /*!< get device configuration callback */ + usbd_desc_t *(*get_device_other_speed)(void); /*!< get device other speed callback */ + usbd_desc_t *(*get_device_lang_id)(void); /*!< get device lang id callback */ + usbd_desc_t *(*get_device_manufacturer_string)(void); /*!< get device manufacturer callback */ + usbd_desc_t *(*get_device_product_string)(void); /*!< get device product callback */ + usbd_desc_t *(*get_device_serial_string)(void); /*!< get device serial callback */ + usbd_desc_t *(*get_device_interface_string)(void); /*!< get device interface string callback */ + usbd_desc_t *(*get_device_config_string)(void); /*!< get device device config callback */ +#if (USBD_SUPPORT_WINUSB == 1) + usbd_desc_t *(*get_device_winusb_os_string)(void); /*!< get winusb os string */ + usbd_desc_t *(*get_device_winusb_os_feature)(void); /*!< get winusb os feature */ + usbd_desc_t *(*get_device_winusb_os_property)(void); /*!< get winusb os property */ +#endif +} usbd_desc_handler; + +/** + * @brief usb device class handler + */ +typedef struct { + usb_sts_type (*init_handler)(void *udev); /*!< usb class init handler */ + usb_sts_type (*clear_handler)(void *udev); /*!< usb class clear handler */ + usb_sts_type (*setup_handler)(void *udev, usb_setup_type *setup); /*!< usb class setup handler */ + usb_sts_type (*ept0_tx_handler)(void *udev); /*!< usb class endpoint 0 tx complete handler */ + usb_sts_type (*ept0_rx_handler)(void *udev); /*!< usb class endpoint 0 rx complete handler */ + usb_sts_type (*in_handler)(void *udev, uint8_t ept_num); /*!< usb class in transfer complete handler */ + usb_sts_type (*out_handler)(void *udev, uint8_t ept_num); /*!< usb class out transfer complete handler */ + usb_sts_type (*sof_handler)(void *udev); /*!< usb class sof handler */ + usb_sts_type (*event_handler)(void *udev, usbd_event_type event); /*!< usb class event handler */ + void *pdata; /*!< usb class data pointer */ +} usbd_class_handler; + +/** + * @brief usb device core struct type + */ +typedef struct { + usb_reg_type *usb_reg; /*!< usb register pointer */ + + usbd_class_handler *class_handler; /*!< usb device class handler pointer */ + usbd_desc_handler *desc_handler; /*!< usb device descriptor handler pointer */ + + usb_ept_info ept_in[USB_EPT_MAX_NUM]; /*!< usb in endpoint infomation struct */ + usb_ept_info ept_out[USB_EPT_MAX_NUM]; /*!< usb out endpoint infomation struct */ + + usb_setup_type setup; /*!< usb setup type struct */ + uint8_t setup_buffer[12]; /*!< usb setup request buffer */ + + uint8_t ept0_sts; /*!< usb control endpoint 0 state */ + uint8_t speed; /*!< usb speed */ + uint16_t ept0_wlength; /*!< usb endpoint 0 transfer length */ + + usbd_conn_state conn_state; /*!< usb current connect state */ + usbd_conn_state old_conn_state; /*!< usb save the previous connect state */ + + uint8_t device_addr; /*!< device address */ + uint8_t remote_wakup; /*!< remote wakeup state */ + uint32_t default_config; /*!< usb default config state */ + uint32_t dev_config; /*!< usb device config state */ + uint32_t config_status; /*!< usb configure status */ +} usbd_core_type; + +void usbd_core_in_handler(usbd_core_type *udev, uint8_t ept_num); + +void usbd_core_out_handler(usbd_core_type *udev, uint8_t ept_num); + +void usbd_core_setup_handler(usbd_core_type *udev, uint8_t ept_num); + +void usbd_ctrl_unsupport(usbd_core_type *udev); + +void usbd_ctrl_send(usbd_core_type *udev, uint8_t *buffer, uint16_t len); + +void usbd_ctrl_recv(usbd_core_type *udev, uint8_t *buffer, uint16_t len); + +void usbd_ctrl_send_status(usbd_core_type *udev); + +void usbd_ctrl_recv_status(usbd_core_type *udev); + +void usbd_set_stall(usbd_core_type *udev, uint8_t ept_addr); + +void usbd_clear_stall(usbd_core_type *udev, uint8_t ept_addr); + +void usbd_ept_open(usbd_core_type *udev, uint8_t ept_addr, uint8_t ept_type, uint16_t maxpacket); + +void usbd_ept_in_check_fifo(usbd_core_type *udev, uint8_t ept_addr); + +void usbd_ept_close(usbd_core_type *udev, uint8_t ept_addr); + +void usbd_ept_send(usbd_core_type *udev, uint8_t ept_num, uint8_t *buffer, uint16_t len); + +void usbd_ept_recv(usbd_core_type *udev, uint8_t ept_num, uint8_t *buffer, uint16_t len); + +void usbd_connect(usbd_core_type *udev); + +void usbd_disconnect(usbd_core_type *udev); + +void usbd_set_device_addr(usbd_core_type *udev, uint8_t address); + +uint32_t usbd_get_recv_len(usbd_core_type *udev, uint8_t ept_addr); + +void usb_ept_defaut_init(usbd_core_type *udev); + +usbd_conn_state usbd_connect_state_get(usbd_core_type *udev); + +void usbd_remote_wakeup(usbd_core_type *udev); + +void usbd_enter_suspend(usbd_core_type *udev); + +void usbd_flush_tx_fifo(usbd_core_type *udev, uint8_t ept_num); + +void usbd_fifo_alloc(usbd_core_type *udev); + +usb_sts_type usbd_core_init(usbd_core_type *udev, + usb_reg_type *usb_reg, + usbd_class_handler *class_handler, + usbd_desc_handler *desc_handler, + uint8_t core_id); +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_usb/usb_drivers/inc/usbd_int.h b/armlib/at32_usb/usb_drivers/inc/usbd_int.h new file mode 100644 index 000000000..64845fe74 --- /dev/null +++ b/armlib/at32_usb/usb_drivers/inc/usbd_int.h @@ -0,0 +1,80 @@ +/** + ************************************************************************** + * @file usbd_int.h + * @brief usb interrupt header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_INT_H +#define __USBD_INT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup AT32F435_437_middlewares_usbd_drivers + * @{ + */ + +/** @addtogroup USBD_drivers_int + * @{ + */ + +/** @defgroup USBD_interrupt_exported_types + * @{ + */ +/* includes ------------------------------------------------------------------*/ +#include "usbd_core.h" +#include "usb_core.h" + +void usbd_irq_handler(otg_core_type *udev); +void usbd_ept_handler(usbd_core_type *udev); +void usbd_reset_handler(usbd_core_type *udev); +void usbd_sof_handler(usbd_core_type *udev); +void usbd_suspend_handler(usbd_core_type *udev); +void usbd_wakeup_handler(usbd_core_type *udev); +void usbd_inept_handler(usbd_core_type *udev); +void usbd_outept_handler(usbd_core_type *udev); +void usbd_enumdone_handler(usbd_core_type *udev); +void usbd_rxflvl_handler(usbd_core_type *udev); +void usbd_incomisioin_handler(usbd_core_type *udev); +void usbd_discon_handler(usbd_core_type *udev); +void usbd_incomisoout_handler(usbd_core_type *udev); +void usb_write_empty_txfifo(usbd_core_type *udev, uint32_t ept_num); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/armlib/at32_usb/usb_drivers/inc/usbd_sdr.h b/armlib/at32_usb/usb_drivers/inc/usbd_sdr.h new file mode 100644 index 000000000..212c5f162 --- /dev/null +++ b/armlib/at32_usb/usb_drivers/inc/usbd_sdr.h @@ -0,0 +1,71 @@ +/** + ************************************************************************** + * @file usb_sdr.h + * @brief usb header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_SDR_H +#define __USB_SDR_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "usb_conf.h" +#include "usb_core.h" +/** @addtogroup AT32F435_437_middlewares_usbd_drivers + * @{ + */ + +/** @addtogroup USBD_drivers_standard_request + * @{ + */ + +/** @defgroup USBD_sdr_exported_functions + * @{ + */ + + +void usbd_setup_request_parse(usb_setup_type *setup, uint8_t *buf); +usb_sts_type usbd_device_request(usbd_core_type *udev); +usb_sts_type usbd_interface_request(usbd_core_type *udev); +usb_sts_type usbd_endpoint_request(usbd_core_type *udev); + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_usb/usb_drivers/inc/usbh_core.h b/armlib/at32_usb/usb_drivers/inc/usbh_core.h new file mode 100644 index 000000000..91d6a3d90 --- /dev/null +++ b/armlib/at32_usb/usb_drivers/inc/usbh_core.h @@ -0,0 +1,373 @@ +/** + ************************************************************************** + * @file usbh_core.h + * @brief usb host core header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBH_CORE_H +#define __USBH_CORE_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "usb_conf.h" +#include "usb_std.h" + +/** @addtogroup AT32F435_437_middlewares_usbh_drivers + * @{ + */ + +/** @addtogroup USBH_drivers_core + * @{ + */ + +/** @defgroup USBH_core_exported_types + * @{ + */ + + +#ifdef USE_OTG_HOST_MODE + +/** + * @brief usb channel flag + */ +typedef enum +{ + HCH_IDLE, /*!< usb host channel idle */ + HCH_XFRC, /*!< usb host channel transfer completed */ + HCH_HALTED, /*!< usb host channel halted */ + HCH_NAK, /*!< usb host channel nak */ + HCH_NYET, /*!< usb host channel nyet */ + HCH_STALL, /*!< usb host channel stall */ + HCH_XACTERR, /*!< usb host channel transaction error */ + HCH_BBLERR, /*!< usb host channel babble error */ + HCH_DATATGLERR /*!< usb host channel data toggle error */ +} hch_sts_type; + +/** + * @brief usb channel state + */ +typedef enum +{ + URB_IDLE = 0, /*!< usb request idle state */ + URB_DONE, /*!< usb request done state */ + URB_NOTREADY, /*!< usb request not ready state */ + URB_NYET, /*!< usb request nyet stat e*/ + URB_ERROR, /*!< usb request error state */ + URB_STALL /*!< usb request stall state */ +} urb_sts_type; + +/** + * @brief usb control channel flag + */ +typedef enum +{ + CTRL_START = 0, /*!< usb control request start */ + CTRL_XFERC, /*!< usb control request completed */ + CTRL_HALTED, /*!< usb control request halted */ + CTRL_NAK, /*!< usb control request nak */ + CTRL_STALL, /*!< usb control request stall */ + CTRL_XACTERR, /*!< usb control request transaction error */ + CTRL_BBLERR, /*!< usb control request babble error */ + CTRL_DATATGLERR, /*!< usb control request data toggle error */ + CTRL_FAIL /*!< usb control request failed */ +} ctrl_sts_type; + +/** + * @brief usb host control state machine + */ +typedef enum +{ + CONTROL_IDLE, /*!< usb control state idle */ + CONTROL_SETUP, /*!< usb control state setup */ + CONTROL_SETUP_WAIT, /*!< usb control state setup wait */ + CONTROL_DATA_IN, /*!< usb control state data in */ + CONTROL_DATA_IN_WAIT, /*!< usb control state data in wait */ + CONTROL_DATA_OUT, /*!< usb control state data out */ + CONTROL_DATA_OUT_WAIT, /*!< usb control state data out wait */ + CONTROL_STATUS_IN, /*!< usb control state status in */ + CONTROL_STATUS_IN_WAIT, /*!< usb control state status in wait */ + CONTROL_STATUS_OUT, /*!< usb control state out */ + CONTROL_STATUS_OUT_WAIT, /*!< usb control state out wait */ + CONTROL_ERROR, /*!< usb control state error */ + CONTROL_STALL, /*!< usb control state stall */ + CONTROL_COMPLETE /*!< usb control state complete */ +} ctrl_ept0_sts_type; + +/** + * @brief usb host enumration state machine + */ +typedef enum +{ + ENUM_IDLE, /*!< usb host enumration state idle */ + ENUM_GET_MIN_DESC, /*!< usb host enumration state get descriptor 8 byte*/ + ENUM_GET_FULL_DESC, /*!< usb host enumration state get descriptor 18 byte*/ + ENUM_SET_ADDR, /*!< usb host enumration state set address */ + ENUM_GET_CFG, /*!< usb host enumration state get configuration */ + ENUM_GET_FULL_CFG, /*!< usb host enumration state get full configuration */ + ENUM_GET_MFC_STRING, /*!< usb host enumration state get manufacturer string */ + ENUM_GET_PRODUCT_STRING, /*!< usb host enumration state get product string */ + ENUM_GET_SERIALNUM_STRING, /*!< usb host enumration state get serial number string */ + ENUM_SET_CONFIG, /*!< usb host enumration state set config */ + ENUM_COMPLETE, /*!< usb host enumration state complete */ +} usbh_enum_sts_type; + +/** + * @brief usb host global state machine + */ +typedef enum +{ + USBH_IDLE, /*!< usb host global state idle */ + USBH_PORT_EN, /*!< usb host global state port enable */ + USBH_ATTACHED, /*!< usb host global state attached */ + USBH_DISCONNECT, /*!< usb host global state disconnect */ + USBH_DEV_SPEED, /*!< usb host global state device speed */ + USBH_ENUMERATION, /*!< usb host global state enumeration */ + USBH_CLASS_REQUEST, /*!< usb host global state class request */ + USBH_CLASS, /*!< usb host global state class */ + USBH_CTRL_XFER, /*!< usb host global state control transfer */ + USBH_USER_HANDLER, /*!< usb host global state user handler */ + USBH_SUSPEND, /*!< usb host global state suspend */ + USBH_SUSPENDED, /*!< usb host have in suspend mode */ + USBH_WAKEUP, /*!< usb host global state wakeup */ + USBH_UNSUPPORT, /*!< usb host global unsupport device */ + USBH_ERROR_STATE, /*!< usb host global state error */ +} usbh_gstate_type; + +/** + * @brief usb host transfer state + */ +typedef enum +{ + CMD_IDLE, /*!< usb host transfer state idle */ + CMD_SEND, /*!< usb host transfer state send */ + CMD_WAIT /*!< usb host transfer state wait */ +} cmd_sts_type; + +/** + * @brief usb host channel malloc state + */ +#define HCH_OK 0x0000 /*!< usb channel malloc state ok */ +#define HCH_USED 0x8000 /*!< usb channel had used */ +#define HCH_ERROR 0xFFFF /*!< usb channel error */ +#define HCH_USED_MASK 0x7FFF /*!< usb channel use mask */ + +/** + * @brief channel pid + */ +#define HCH_PID_DATA0 0 /*!< usb channel pid data 0 */ +#define HCH_PID_DATA2 1 /*!< usb channel pid data 2 */ +#define HCH_PID_DATA1 2 /*!< usb channel pid data 1 */ +#define HCH_PID_SETUP 3 /*!< usb channel pid setup */ + +/** + * @brief channel data transfer direction + */ +#define USB_REQUEST_DIR_MASK 0x80 /*!< usb request direction mask */ +#define USB_DIR_H2D USB_REQ_DIR_HTD /*!< usb request direction host to device */ +#define USB_DIR_D2H USB_REQ_DIR_DTH /*!< usb request direction device to host */ + +/** + * @brief request timeout + */ +#define DATA_STAGE_TIMEOUT 5000 /*!< usb data stage timeout */ +#define NODATA_STAGE_TIMEOUT 50 /*!< usb no-data stage timeout */ + +/** + * @brief max interface and endpoint + */ +#define USBH_MAX_ERROR_COUNT 2 /*!< usb support maximum error */ +#define USBH_MAX_INTERFACE 5 /*!< usb support maximum interface */ +#define USBH_MAX_ENDPOINT 5 /*!< usb support maximum endpoint */ + +/** + * @brief interface descriptor + */ +typedef struct +{ + usb_interface_desc_type interface; /*!< usb device interface descriptor structure */ + usb_endpoint_desc_type endpoint[USBH_MAX_ENDPOINT]; /*!< usb device endpoint descriptor structure array */ +} usb_itf_desc_type; + +/** + * @brief configure descriptor + */ +typedef struct +{ + usb_configuration_desc_type cfg; /*!< usb device configuration descriptor structure */ + usb_itf_desc_type interface[USBH_MAX_INTERFACE]; /*!< usb device interface descriptor structure array*/ +} usb_cfg_desc_type; + +/** + * @brief device descriptor + */ +typedef struct +{ + uint8_t address; /*!< usb device address */ + uint8_t speed; /*!< usb device speed */ + usb_device_desc_type dev_desc; /*!< usb device descriptor */ + usb_cfg_desc_type cfg_desc; /*!< usb device configuration */ +} usbh_dev_desc_type; + +/** + * @brief usb host control struct type + */ +typedef struct +{ + uint8_t hch_in; /*!< in channel number */ + uint8_t hch_out; /*!< out channel number */ + uint8_t ept0_size; /*!< endpoint 0 size */ + uint8_t *buffer; /*!< endpoint 0 transfer buffer */ + usb_setup_type setup; /*!< control setup type */ + uint16_t len; /*!< transfer length */ + uint8_t err_cnt; /*!< error counter */ + uint32_t timer; /*!< transfer timer */ + ctrl_sts_type sts; /*!< control transfer status */ + ctrl_ept0_sts_type state; /*!< endpoint 0 state */ +} usbh_ctrl_type; + +/** + * @brief host class handler type + */ +typedef struct +{ + usb_sts_type (*init_handler)(void *uhost); /*!< usb host class init handler */ + usb_sts_type (*reset_handler)(void *uhost); /*!< usb host class reset handler */ + usb_sts_type (*request_handler)(void *uhost); /*!< usb host class request handler */ + usb_sts_type (*process_handler)(void *uhost); /*!< usb host class process handler */ + void *pdata; /*!< usb host class data */ +} usbh_class_handler_type; + +/** + * @brief host user handler type + */ +typedef struct +{ + usb_sts_type (*user_init)(void); /*!< usb host user init handler */ + usb_sts_type (*user_reset)(void); /*!< usb host user reset handler */ + usb_sts_type (*user_attached)(void); /*!< usb host user attached handler */ + usb_sts_type (*user_disconnect)(void); /*!< usb host user disconnect handler */ + usb_sts_type (*user_speed)(uint8_t speed); /*!< usb host user speed handler */ + usb_sts_type (*user_mfc_string)(void *); /*!< usb host user manufacturer string handler */ + usb_sts_type (*user_product_string)(void *); /*!< usb host user product string handler */ + usb_sts_type (*user_serial_string)(void *); /*!< usb host user serial handler */ + usb_sts_type (*user_enumeration_done)(void); /*!< usb host user enumeration done handler */ + usb_sts_type (*user_application)(void); /*!< usb host user application handler */ + usb_sts_type (*user_active_vbus)(void *uhost, confirm_state state); /*!< usb host user active vbus */ + usb_sts_type (*user_not_support)(void); /*!< usb host user not support handler */ +} usbh_user_handler_type; + +/** + * @brief host host core handler type + */ +typedef struct +{ + usb_reg_type *usb_reg; /*!< usb register pointer */ + + uint8_t global_state; /*!< usb host global state machine */ + uint8_t enum_state; /*!< usb host enumeration state machine */ + uint8_t req_state; /*!< usb host request state machine */ + + usbh_dev_desc_type dev; /*!< usb device descriptor */ + usbh_ctrl_type ctrl; /*!< usb host control transfer struct */ + + usbh_class_handler_type *class_handler; /*!< usb host class handler pointer */ + usbh_user_handler_type *user_handler; /*!< usb host user handler pointer */ + + usb_hch_type hch[USB_HOST_CHANNEL_NUM]; /*!< usb host channel array */ + uint8_t rx_buffer[USB_MAX_DATA_LENGTH]; /*!< usb host rx buffer */ + + uint32_t conn_sts; /*!< connect status */ + uint32_t port_enable; /*!< port enable status */ + uint32_t timer; /*!< sof timer */ + + uint32_t err_cnt[USB_HOST_CHANNEL_NUM]; /*!< error counter */ + uint32_t xfer_cnt[USB_HOST_CHANNEL_NUM]; /*!< xfer counter */ + hch_sts_type hch_state[USB_HOST_CHANNEL_NUM];/*!< channel state */ + urb_sts_type urb_state[USB_HOST_CHANNEL_NUM];/*!< usb request state */ + uint16_t channel[USB_HOST_CHANNEL_NUM]; /*!< channel array */ +} usbh_core_type; + + +void usbh_free_channel(usbh_core_type *uhost, uint8_t index); +uint16_t usbh_get_free_channel(usbh_core_type *uhost); +usb_sts_type usbh_set_toggle(usbh_core_type *uhost, uint8_t hc_num, uint8_t toggle); +usb_sts_type usbh_in_out_request(usbh_core_type *uhost, uint8_t hc_num); +usb_sts_type usbh_interrupt_recv(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length); +usb_sts_type usbh_interrupt_send(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length); +usb_sts_type usbh_bulk_recv(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length); +usb_sts_type usbh_bulk_send(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length); +usb_sts_type usbh_isoc_send(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length); +usb_sts_type usbh_isoc_recv(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length); +usb_sts_type usbh_cfg_default_init(usbh_core_type *uhost); +void usbh_enter_suspend(usbh_core_type *uhost); +void usbh_resume(usbh_core_type *uhost); + +uint16_t usbh_alloc_channel(usbh_core_type *uhost, uint8_t ept_addr); +urb_sts_type usbh_get_urb_status(usbh_core_type *uhost, uint8_t ch_num); +usb_sts_type usbh_ctrl_result_check(usbh_core_type *uhost, + ctrl_ept0_sts_type next_ctrl_state, + uint8_t next_enum_state); +uint8_t usbh_alloc_address(void); +void usbh_reset_port(usbh_core_type *uhost); +usb_sts_type usbh_loop_handler(usbh_core_type *uhost); +void usbh_ch_disable(usbh_core_type *uhost, uint8_t chn); +void usbh_hc_open(usbh_core_type *uhost, + uint8_t chn, + uint8_t ept_num, + uint8_t dev_address, + uint8_t type, + uint16_t maxpacket, + uint8_t speed); +void usbh_active_vbus(usbh_core_type *uhost, confirm_state state); + +usb_sts_type usbh_core_init(usbh_core_type *uhost, + usb_reg_type *usb_reg, + usbh_class_handler_type *class_handler, + usbh_user_handler_type *user_handler, + uint8_t core_id); +#endif + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_usb/usb_drivers/inc/usbh_ctrl.h b/armlib/at32_usb/usb_drivers/inc/usbh_ctrl.h new file mode 100644 index 000000000..4d6312855 --- /dev/null +++ b/armlib/at32_usb/usb_drivers/inc/usbh_ctrl.h @@ -0,0 +1,107 @@ +/** + ************************************************************************** + * @file usbh_ctrl.h + * @brief usb header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBH_CTRL_H +#define __USBH_CTRL_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* includes ------------------------------------------------------------------*/ +#include "usb_conf.h" +#include "usbh_core.h" + +/** @addtogroup AT32F435_437_middlewares_usbh_drivers + * @{ + */ + +/** @addtogroup USBH_drivers_control + * @{ + */ + +/** @defgroup USBH_ctrl_exported_types + * @{ + */ + +usb_sts_type usbh_ctrl_send_setup(usbh_core_type *uhost, uint8_t *buffer, uint8_t hc_num); +usb_sts_type usbh_ctrl_recv_data(usbh_core_type *uhost, uint8_t *buffer, + uint16_t length, uint16_t hc_num); +usb_sts_type usbh_ctrl_send_data(usbh_core_type *uhost, uint8_t *buffer, + uint16_t length, uint16_t hc_num); +usb_sts_type usbh_ctrl_setup_handler(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_setup_wait_handler(usbh_core_type *uhost, uint32_t *timeout); +usb_sts_type usbh_ctrl_data_in_handler(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_data_in_wait_handler(usbh_core_type *uhost, uint32_t timeout); +usb_sts_type usbh_ctrl_data_out_handler(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_data_out_wait_handler(usbh_core_type *uhost, uint32_t timeout); +usb_sts_type usbh_ctrl_status_in_handler(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_status_in_wait_handler(usbh_core_type *uhost, uint32_t timeout); +usb_sts_type usbh_ctrl_status_out_handler(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_status_out_wait_handler(usbh_core_type *uhost, uint32_t timeout); +usb_sts_type usbh_ctrl_error_handler(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_stall_handler(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_complete_handler(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_transfer_loop(usbh_core_type *uhost); +usb_sts_type usbh_ctrl_request(usbh_core_type *uhost, uint8_t *buffer, uint16_t length); +usb_sts_type usbh_get_descriptor(usbh_core_type *uhost, uint16_t length, + uint8_t req_type, uint16_t wvalue, + uint8_t *buffer); +void usbh_parse_dev_desc(usbh_core_type *uhost, uint8_t *buffer, uint16_t length); +usb_header_desc_type *usbh_get_next_header(uint8_t *buf, uint16_t *index_len); +void usbh_parse_interface_desc(usb_interface_desc_type *intf, uint8_t *buf); +void usbh_parse_endpoint_desc(usb_endpoint_desc_type *ept_desc, uint8_t *buf); +usb_sts_type usbh_parse_configure_desc(usbh_core_type *uhost, + uint8_t *buffer, uint16_t length); +uint8_t usbh_find_interface(usbh_core_type *uhost, uint8_t class_code, uint8_t sub_class, uint8_t protocol); +void usbh_parse_string_desc(uint8_t *src, uint8_t *dest, uint16_t length); +usb_sts_type usbh_get_device_descriptor(usbh_core_type *uhost, uint16_t length); +usb_sts_type usbh_get_configure_descriptor(usbh_core_type *uhost, uint16_t length); +usb_sts_type usbh_get_sting_descriptor(usbh_core_type *uhost, uint8_t string_id, + uint8_t *buffer, uint16_t length); +usb_sts_type usbh_set_configuration(usbh_core_type *uhost, uint16_t config); +usb_sts_type usbh_set_address(usbh_core_type *uhost, uint8_t address); +usb_sts_type usbh_set_interface(usbh_core_type *uhost, uint8_t ept_num, uint8_t altsetting); +usb_sts_type usbh_set_feature(usbh_core_type *uhost, uint8_t feature, uint16_t index); +usb_sts_type usbh_clear_dev_feature(usbh_core_type *uhost, uint8_t feature, uint16_t index); +usb_sts_type usbh_clear_ept_feature(usbh_core_type *uhost, uint8_t ept_num, uint8_t hc_num); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_usb/usb_drivers/inc/usbh_int.h b/armlib/at32_usb/usb_drivers/inc/usbh_int.h new file mode 100644 index 000000000..30ac08581 --- /dev/null +++ b/armlib/at32_usb/usb_drivers/inc/usbh_int.h @@ -0,0 +1,75 @@ +/** + ************************************************************************** + * @file usbh_int.h + * @brief usb header file + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +/* define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBH_INT_H +#define __USBH_INT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup AT32F435_437_middlewares_usbh_drivers + * @{ + */ + +/** @addtogroup USBH_drivers_int + * @{ + */ + +/** @defgroup USBH_interrupt_exported_types + * @{ + */ + +/* includes ------------------------------------------------------------------*/ +#include "usbh_core.h" +#include "usb_core.h" +void usbh_irq_handler(otg_core_type *hdev); +void usbh_hch_handler(usbh_core_type *uhost); +void usbh_port_handler(usbh_core_type *uhost); +void usbh_disconnect_handler(usbh_core_type *uhost); +void usbh_hch_in_handler(usbh_core_type *uhost, uint8_t chn); +void usbh_hch_out_handler(usbh_core_type *uhost, uint8_t chn); +void usbh_rx_qlvl_handler(usbh_core_type *uhost); +void usbh_wakeup_handler(usbh_core_type *uhost); +void usbh_sof_handler(usbh_core_type *uhost); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/armlib/at32_usb/usb_drivers/src/usb_core.c b/armlib/at32_usb/usb_drivers/src/usb_core.c new file mode 100644 index 000000000..8b11f3c37 --- /dev/null +++ b/armlib/at32_usb/usb_drivers/src/usb_core.c @@ -0,0 +1,186 @@ +/** + ************************************************************************** + * @file usb_core.c + * @brief usb driver + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ +#include "usb_core.h" + +/** @addtogroup AT32F435_437_middlewares_usb_drivers + * @{ + */ + +/** @defgroup USB_drivers_core + * @brief usb global drivers core + * @{ + */ + +/** @defgroup USB_core_private_functions + * @{ + */ + +usb_sts_type usb_core_config(otg_core_type *udev, uint8_t core_id); + +/** + * @brief usb core config + * @param otgdev: to the structure of otg_core_type + * @param core_id: usb core id number (USB_FULL_SPEED_CORE_ID) + * @retval usb_sts_type + */ +usb_sts_type usb_core_config(otg_core_type *otgdev, uint8_t core_id) +{ + /* set usb speed and core id */ + otgdev->cfg.speed = core_id; + otgdev->cfg.core_id = core_id; + + /* default sof out and vbus ignore */ + otgdev->cfg.sof_out = FALSE; + otgdev->cfg.vbusig = FALSE; + + /* set max size */ + otgdev->cfg.max_size = 64; + + /* set support number of channel and endpoint */ +#ifdef USE_OTG_HOST_MODE + otgdev->cfg.hc_num = USB_HOST_CHANNEL_NUM; +#endif +#ifdef USE_OTG_DEVICE_MODE + otgdev->cfg.ept_num = USB_EPT_MAX_NUM; +#endif + otgdev->cfg.fifo_size = OTG_FIFO_SIZE; + if(core_id == USB_FULL_SPEED_CORE_ID) + { + otgdev->cfg.phy_itface = 2; + } +#ifdef USB_SOF_OUTPUT_ENABLE + otgdev->cfg.sof_out = TRUE; +#endif + +#ifdef USB_VBUS_IGNORE + otgdev->cfg.vbusig = TRUE; +#endif + + return USB_OK; +} + +#ifdef USE_OTG_DEVICE_MODE +/** + * @brief usb device initialization + * @param otgdev: to the structure of otg_core_type + * @param core_id: usb core id number (USB_FULL_SPEED_CORE_ID) + * @param usb_id: select use OTG1 or OTG2 + * this parameter can be one of the following values: + * - USB_OTG1_ID + * - USB_OTG2_ID + * @param dev_handler: usb class callback handler + * @param desc_handler: device config callback handler + * @retval usb_sts_type + */ +usb_sts_type usbd_init(otg_core_type *otgdev, + uint8_t core_id, uint8_t usb_id, + usbd_class_handler *class_handler, + usbd_desc_handler *desc_handler) +{ + usb_sts_type usb_sts = USB_OK; + + /* select use OTG1 or OTG2 */ + otgdev->usb_reg = usb_global_select_core(usb_id); + + /* usb device core config */ + usb_core_config(otgdev, core_id); + + if(otgdev->cfg.sof_out) + { + otgdev->usb_reg->gccfg_bit.sofouten = TRUE; + } + + if(otgdev->cfg.vbusig) + { + otgdev->usb_reg->gccfg_bit.vbusig = TRUE; + } + + /* usb device core init */ + usbd_core_init(&(otgdev->dev), otgdev->usb_reg, + class_handler, + desc_handler, + core_id); + + return usb_sts; +} +#endif + +#ifdef USE_OTG_HOST_MODE + +/** + * @brief usb host initialization. + * @param otgdev: to the structure of otg_core_type + * @param core_id: usb core id number (USB_FULL_SPEED_CORE_ID) + * @param usb_id: select use OTG1 or OTG2 + * this parameter can be one of the following values: + * - USB_OTG1_ID + * - USB_OTG2_ID + * @param class_handler: usb class callback handler + * @param user_handler: user callback handler + * @retval usb_sts_type + */ +usb_sts_type usbh_init(otg_core_type *otgdev, + uint8_t core_id, uint8_t usb_id, + usbh_class_handler_type *class_handler, + usbh_user_handler_type *user_handler) +{ + usb_sts_type status = USB_OK; + + /* select use otg1 or otg2 */ + otgdev->usb_reg = usb_global_select_core(usb_id); + + /* usb core config */ + usb_core_config(otgdev, core_id); + + if(otgdev->cfg.sof_out) + { + otgdev->usb_reg->gccfg_bit.sofouten = TRUE; + } + + if(otgdev->cfg.vbusig) + { + otgdev->usb_reg->gccfg_bit.vbusig = TRUE; + } + + /* usb host core init */ + usbh_core_init(&otgdev->host, otgdev->usb_reg, + class_handler, + user_handler, + core_id); + + return status; +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_usb/usb_drivers/src/usbd_core.c b/armlib/at32_usb/usb_drivers/src/usbd_core.c new file mode 100644 index 000000000..ac033cfea --- /dev/null +++ b/armlib/at32_usb/usb_drivers/src/usbd_core.c @@ -0,0 +1,904 @@ +/** + ************************************************************************** + * @file usbd_core.c + * @brief usb device driver + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ + +#include "usb_core.h" +#include "usbd_core.h" +#include "usbd_sdr.h" + +/** @addtogroup AT32F435_437_middlewares_usbd_drivers + * @{ + */ + +/** @defgroup USBD_drivers_core + * @brief usb device drivers core + * @{ + */ + +/** @defgroup USBD_core_private_functions + * @{ + */ + +/** + * @brief usb core in transfer complete handler + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @retval none + */ +void usbd_core_in_handler(usbd_core_type *udev, uint8_t ept_addr) +{ + /* get endpoint info*/ + usb_ept_info *ept_info = &udev->ept_in[ept_addr & 0x7F]; + + if(ept_addr == 0) + { + if(udev->ept0_sts == USB_EPT0_DATA_IN) + { + if(ept_info->rem0_len > ept_info->maxpacket) + { + ept_info->rem0_len -= ept_info->maxpacket; + usbd_ept_send(udev, 0, ept_info->trans_buf, + MIN(ept_info->rem0_len, ept_info->maxpacket)); + } + /* endpoint 0 */ + else if(ept_info->last_len == ept_info->maxpacket + && ept_info->ept0_slen >= ept_info->maxpacket + && ept_info->ept0_slen < udev->ept0_wlength) + { + ept_info->last_len = 0; + usbd_ept_send(udev, 0, 0, 0); + usbd_ept_recv(udev, ept_addr, 0, 0); + } + else + { + + if(udev->class_handler->ept0_tx_handler != 0 && + udev->conn_state == USB_CONN_STATE_CONFIGURED) + { + udev->class_handler->ept0_tx_handler(udev); + } + usbd_ctrl_recv_status(udev); + + } + } + } + else if(udev->class_handler->in_handler != 0 && + udev->conn_state == USB_CONN_STATE_CONFIGURED) + { + /* other user define endpoint */ + udev->class_handler->in_handler(udev, ept_addr); + } +} + +/** + * @brief usb core out transfer complete handler + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @retval none + */ +void usbd_core_out_handler(usbd_core_type *udev, uint8_t ept_addr) +{ + /* get endpoint info*/ + usb_ept_info *ept_info = &udev->ept_out[ept_addr & 0x7F]; + + if(ept_addr == 0) + { + /* endpoint 0 */ + if(udev->ept0_sts == USB_EPT0_DATA_OUT) + { + if(ept_info->rem0_len > ept_info->maxpacket) + { + ept_info->rem0_len -= ept_info->maxpacket; + usbd_ept_recv(udev, ept_addr, ept_info->trans_buf, + MIN(ept_info->rem0_len, ept_info->maxpacket)); + } + else + { + if(udev->class_handler->ept0_rx_handler != 0) + { + udev->class_handler->ept0_rx_handler(udev); + } + usbd_ctrl_send_status(udev); + } + } + } + else if(udev->class_handler->out_handler != 0 && + udev->conn_state == USB_CONN_STATE_CONFIGURED) + { + /* other user define endpoint */ + udev->class_handler->out_handler(udev, ept_addr); + } +} + +/** + * @brief usb core setup transfer complete handler + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @retval none + */ +void usbd_core_setup_handler(usbd_core_type *udev, uint8_t ept_num) +{ + /* setup parse */ + usbd_setup_request_parse(&udev->setup, udev->setup_buffer); + + /* set ept0 status */ + udev->ept0_sts = USB_EPT0_SETUP; + udev->ept0_wlength = udev->setup.wLength; + + switch(udev->setup.bmRequestType & USB_REQ_RECIPIENT_MASK) + { + case USB_REQ_RECIPIENT_DEVICE: + /* recipient device request */ + usbd_device_request(udev); + break; + case USB_REQ_RECIPIENT_INTERFACE: + /* recipient interface request */ + usbd_interface_request(udev); + break; + case USB_REQ_RECIPIENT_ENDPOINT: + /* recipient endpoint request */ + usbd_endpoint_request(udev); + break; + default: + usbd_ctrl_unsupport(udev); + break; + } +} + +/** + * @brief usb control endpoint send data + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @param buffer: send data buffer + * @param len: send data length + * @retval none + */ +void usbd_ctrl_send(usbd_core_type *udev, uint8_t *buffer, uint16_t len) +{ + usb_ept_info *ept_info = &udev->ept_in[0]; + + ept_info->ept0_slen = len; + ept_info->rem0_len = len; + udev->ept0_sts = USB_EPT0_DATA_IN; + + usbd_ept_send(udev, 0, buffer, len); +} + +/** + * @brief usb control endpoint recv data + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @param buffer: recv data buffer + * @param len: recv data length + * @retval none + */ +void usbd_ctrl_recv(usbd_core_type *udev, uint8_t *buffer, uint16_t len) +{ + usb_ept_info *ept_info = &udev->ept_out[0]; + + ept_info->ept0_slen = len; + ept_info->rem0_len = len; + udev->ept0_sts = USB_EPT0_DATA_OUT; + + usbd_ept_recv(udev, 0, buffer, len); +} + +/** + * @brief usb control endpoint send in status + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_ctrl_send_status(usbd_core_type *udev) +{ + udev->ept0_sts = USB_EPT0_STATUS_IN; + + usbd_ept_send(udev, 0, 0, 0); +} + +/** + * @brief usb control endpoint send out status + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_ctrl_recv_status(usbd_core_type *udev) +{ + udev->ept0_sts = USB_EPT0_STATUS_OUT; + + usbd_ept_recv(udev, 0, 0, 0); +} + +/** + * @brief clear endpoint stall + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @retval none + */ +void usbd_clear_stall(usbd_core_type *udev, uint8_t ept_addr) +{ + usb_ept_info *ept_info; + usb_reg_type *usbx = udev->usb_reg; + + if(ept_addr & 0x80) + { + /* in endpoint */ + ept_info = &udev->ept_in[ept_addr & 0x7F]; + } + else + { + /* out endpoint */ + ept_info = &udev->ept_out[ept_addr & 0x7F]; + } + usb_ept_clear_stall(usbx, ept_info); + ept_info->stall = 0; +} + +/** + * @brief usb set endpoint to stall status + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @retval none + */ +void usbd_set_stall(usbd_core_type *udev, uint8_t ept_addr) +{ + usb_ept_info *ept_info; + usb_reg_type *usbx = udev->usb_reg; + + if(ept_addr & 0x80) + { + /* in endpoint */ + ept_info = &udev->ept_in[ept_addr & 0x7F]; + } + else + { + /* out endpoint */ + ept_info = &udev->ept_out[ept_addr & 0x7F]; + } + usb_ept_stall(usbx, ept_info); + + ept_info->stall = 1; +} + +/** + * @brief un-support device request + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_ctrl_unsupport(usbd_core_type *udev) +{ + /* return stall status */ + usbd_set_stall(udev, 0x00); + usbd_set_stall(udev, 0x80); +} + +/** + * @brief get endpoint receive data length + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @retval data receive len + */ +uint32_t usbd_get_recv_len(usbd_core_type *udev, uint8_t ept_addr) +{ + usb_ept_info *ept = &udev->ept_out[ept_addr & 0x7F]; + return ept->trans_len; +} + +/** + * @brief usb open endpoint + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @param ept_type: endpoint type + * @param maxpacket: endpoint support max buffer size + * @retval none + */ +void usbd_ept_open(usbd_core_type *udev, uint8_t ept_addr, uint8_t ept_type, uint16_t maxpacket) +{ + usb_reg_type *usbx = udev->usb_reg; + usb_ept_info *ept_info; + + if((ept_addr & 0x80) == 0) + { + /* out endpoint info */ + ept_info = &udev->ept_out[ept_addr & 0x7F]; + ept_info->inout = EPT_DIR_OUT; + } + else + { + /* in endpoint info */ + ept_info = &udev->ept_in[ept_addr & 0x7F]; + ept_info->inout = EPT_DIR_IN; + } + + /* set endpoint maxpacket and type */ + ept_info->maxpacket = maxpacket; + ept_info->trans_type = ept_type; + + /* open endpoint */ + usb_ept_open(usbx, ept_info); +} + +/** + * @brief usb check fifo + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @retval none + */ +void usbd_ept_in_check_fifo(usbd_core_type *udev, uint8_t ept_addr) +{ + otg_global_type *usbx = udev->usb_reg; + uint32_t timeout = 0xFFFF; + uint8_t endp = ept_addr & 0x7F; + if(USB_INEPT(usbx, endp)->diepctl_bit.eptena == SET && + USB_INEPT(usbx, endp)->diepctl_bit.usbacept == SET) + { + USB_INEPT(usbx, endp)->diepctl_bit.snak = TRUE; + USB_INEPT(usbx, endp)->diepctl_bit.eptdis = TRUE; + USB_INEPT(usbx, endp)->diepctl_bit.snak = TRUE; + while(USB_INEPT(usbx, endp)->diepctl_bit.eptdis && timeout --); + usbd_flush_tx_fifo(udev, endp); + } +} + +/** + * @brief usb close endpoint + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @retval none + */ +void usbd_ept_close(usbd_core_type *udev, uint8_t ept_addr) +{ + usb_ept_info *ept_info; + if(ept_addr & 0x80) + { + /* in endpoint */ + ept_info = &udev->ept_in[ept_addr & 0x7F]; + } + else + { + /* out endpoint */ + ept_info = &udev->ept_out[ept_addr & 0x7F]; + } + + /* close endpoint */ + usb_ept_close(udev->usb_reg, ept_info); +} + +/** + * @brief usb device connect to host + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_connect(usbd_core_type *udev) +{ + usb_connect(udev->usb_reg); +} + +/** + * @brief usb device disconnect to host + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_disconnect(usbd_core_type *udev) +{ + usb_disconnect(udev->usb_reg); +} + +/** + * @brief usb device set device address. + * @param udev: to the structure of usbd_core_type + * @param address: host assignment address + * @retval none + */ +void usbd_set_device_addr(usbd_core_type *udev, uint8_t address) +{ + usb_set_address(udev->usb_reg, address); +} + +/** + * @brief usb endpoint structure initialization + * @param udev: to the structure of usbd_core_type + * @retval none + */ +static void usb_ept_default_init(usbd_core_type *udev) +{ + uint8_t i_index = 0; + /* init in endpoint info structure */ + for(i_index = 0; i_index < USB_EPT_MAX_NUM; i_index ++) + { + udev->ept_in[i_index].eptn = i_index; + udev->ept_in[i_index].ept_address = i_index; + udev->ept_in[i_index].inout = EPT_DIR_IN; + udev->ept_in[i_index].maxpacket = 0; + udev->ept_in[i_index].trans_buf = 0; + udev->ept_in[i_index].total_len = 0; + } + + /* init out endpoint info structure */ + for(i_index = 0; i_index < USB_EPT_MAX_NUM; i_index ++) + { + udev->ept_out[i_index].eptn = i_index; + udev->ept_out[i_index].ept_address = i_index; + udev->ept_out[i_index].inout = EPT_DIR_OUT; + udev->ept_out[i_index].maxpacket = 0; + udev->ept_out[i_index].trans_buf = 0; + udev->ept_out[i_index].total_len = 0; + } +} + +/** + * @brief endpoint send data + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @param buffer: send data buffer + * @param len: send data length + * @retval none + */ +void usbd_ept_send(usbd_core_type *udev, uint8_t ept_addr, uint8_t *buffer, uint16_t len) +{ + /* get endpoint info struct and register */ + usb_reg_type *usbx = udev->usb_reg; + usb_ept_info *ept_info = &udev->ept_in[ept_addr & 0x7F]; + otg_eptin_type *ept_in = USB_INEPT(usbx, ept_info->eptn); + otg_device_type *dev = OTG_DEVICE(usbx); + uint32_t pktcnt; + + /* check endpoint fifo */ + usbd_ept_in_check_fifo(udev, ept_addr); + + /* set send data buffer and length */ + ept_info->trans_buf = buffer; + ept_info->total_len = len; + ept_info->trans_len = 0; + + /* transfer data len is zero */ + if(ept_info->total_len == 0) + { + ept_in->dieptsiz_bit.pktcnt = 1; + ept_in->dieptsiz_bit.xfersize = 0; + } + else + { + if((ept_addr & 0x7F) == 0) // endpoint 0 + { + /* endpoint 0 */ + if(ept_info->total_len > ept_info->maxpacket) + { + ept_info->total_len = ept_info->maxpacket; + } + + /* set transfer size */ + ept_in->dieptsiz_bit.xfersize = ept_info->total_len; + + /* set packet count */ + ept_in->dieptsiz_bit.pktcnt = 1; + + ept_info->last_len = ept_info->total_len; + } + else + { + /* other endpoint */ + + /* packet count */ + pktcnt = (ept_info->total_len + ept_info->maxpacket - 1) / ept_info->maxpacket; + + /* set transfer size */ + ept_in->dieptsiz_bit.xfersize = ept_info->total_len; + + /* set packet count */ + ept_in->dieptsiz_bit.pktcnt = pktcnt; + + if(ept_info->trans_type == EPT_ISO_TYPE) + { + ept_in->dieptsiz_bit.mc = 1; + } + } + } + + if(ept_info->trans_type == EPT_ISO_TYPE) + { + if((dev->dsts_bit.soffn & 0x1) == 0) + { + ept_in->diepctl_bit.setd1pid = TRUE; + } + else + { + ept_in->diepctl_bit.setd0pid = TRUE; + } + } + + /* clear endpoint nak */ + ept_in->diepctl_bit.cnak = TRUE; + + /* endpoint enable */ + ept_in->diepctl_bit.eptena = TRUE; + + if(ept_info->trans_type != EPT_ISO_TYPE) + { + if(ept_info->total_len > 0) + { + /* set in endpoint tx fifo empty interrupt mask */ + dev->diepempmsk |= 1 << ept_info->eptn; + } + } + else + { + /* write data to fifo */ + usb_write_packet(usbx, ept_info->trans_buf, ept_info->eptn, ept_info->total_len); + } +} + +/** + * @brief endpoint receive data + * @param udev: to the structure of usbd_core_type + * @param ept_addr: endpoint number + * @param buffer: receive data buffer + * @param len: receive data length + * @retval none + */ +void usbd_ept_recv(usbd_core_type *udev, uint8_t ept_addr, uint8_t *buffer, uint16_t len) +{ + /* get endpoint info struct and register */ + usb_reg_type *usbx = udev->usb_reg; + usb_ept_info *ept_info = &udev->ept_out[ept_addr & 0x7F]; + otg_eptout_type *ept_out = USB_OUTEPT(usbx, ept_info->eptn); + otg_device_type *dev = OTG_DEVICE(usbx); + uint32_t pktcnt; + + /* set receive data buffer and length */ + ept_info->trans_buf = buffer; + ept_info->total_len = len; + ept_info->trans_len = 0; + + if((ept_addr & 0x7F) == 0) + { + /* endpoint 0 */ + ept_info->total_len = ept_info->maxpacket; + } + + if(ept_info->total_len == 0 || ((ept_addr & 0x7F) == 0)) + { + /* set transfer size */ + ept_out->doeptsiz_bit.xfersize = ept_info->maxpacket; + + /* set packet count */ + ept_out->doeptsiz_bit.pktcnt = 1; + } + else + { + pktcnt = (ept_info->total_len + ept_info->maxpacket - 1) / ept_info->maxpacket; + + /* set transfer size */ + ept_out->doeptsiz_bit.xfersize = ept_info->maxpacket * pktcnt; + + /* set packet count */ + ept_out->doeptsiz_bit.pktcnt = pktcnt; + } + + if(ept_info->trans_type == EPT_ISO_TYPE) + { + if((dev->dsts_bit.soffn & 0x01) == 0) + { + ept_out->doepctl_bit.setd1pid = TRUE; + } + else + { + ept_out->doepctl_bit.setd0pid = TRUE; + } + } + + /* clear endpoint nak */ + ept_out->doepctl_bit.cnak = TRUE; + + /* endpoint enable */ + ept_out->doepctl_bit.eptena = TRUE; +} + +/** + * @brief get usb connect state + * @param udev: to the structure of usbd_core_type + * @retval usb connect state + */ +usbd_conn_state usbd_connect_state_get(usbd_core_type *udev) +{ + return udev->conn_state; +} + +/** + * @brief usb device remote wakeup + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_remote_wakeup(usbd_core_type *udev) +{ + /* check device is in suspend mode */ + if(usb_suspend_status_get(udev->usb_reg) == 1) + { + /* set connect state */ + udev->conn_state = udev->old_conn_state; + + /* open phy clock */ + usb_open_phy_clk(udev->usb_reg); + + /* set remote wakeup */ + usb_remote_wkup_set(udev->usb_reg); + + /* delay 10 ms */ + usb_delay_ms(10); + + /* clear remote wakup */ + usb_remote_wkup_clear(udev->usb_reg); + } +} + +/** + * @brief usb device enter suspend mode + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_enter_suspend(usbd_core_type *udev) +{ + /* check device is in suspend mode */ + if(usb_suspend_status_get(udev->usb_reg) == 1) + { + /* stop phy clk */ + usb_stop_phy_clk(udev->usb_reg); + } +} + +/** + * @brief usb device flush in endpoint fifo + * @param udev: to the structure of usbd_core_type + * @param ept_num: endpoint number + * @retval none + */ +void usbd_flush_tx_fifo(usbd_core_type *udev, uint8_t ept_num) +{ + /* flush endpoint tx fifo */ + usb_flush_tx_fifo(udev->usb_reg, ept_num & 0x1F); +} + +/** + * @brief usb device endpoint fifo alloc + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_fifo_alloc(usbd_core_type *udev) +{ + usb_reg_type *usbx = udev->usb_reg; + + if(usbx == OTG1_GLOBAL) + { + /* set receive fifo size */ + usb_set_rx_fifo(usbx, USBD_RX_SIZE); + + /* set endpoint0 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT0, USBD_EP0_TX_SIZE); + + /* set endpoint1 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT1, USBD_EP1_TX_SIZE); + + /* set endpoint2 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT2, USBD_EP2_TX_SIZE); + + /* set endpoint3 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT3, USBD_EP3_TX_SIZE); + + if(USB_EPT_MAX_NUM == 8) + { + /* set endpoint4 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT4, USBD_EP4_TX_SIZE); + + /* set endpoint5 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT5, USBD_EP5_TX_SIZE); + + /* set endpoint6 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT6, USBD_EP6_TX_SIZE); + + /* set endpoint7 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT7, USBD_EP7_TX_SIZE); + } + } +#ifdef OTG2_GLOBAL + if(usbx == OTG2_GLOBAL) + { + /* set receive fifo size */ + usb_set_rx_fifo(usbx, USBD2_RX_SIZE); + + /* set endpoint0 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT0, USBD2_EP0_TX_SIZE); + + /* set endpoint1 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT1, USBD2_EP1_TX_SIZE); + + /* set endpoint2 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT2, USBD2_EP2_TX_SIZE); + + /* set endpoint3 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT3, USBD2_EP3_TX_SIZE); + + if(USB_EPT_MAX_NUM == 8) + { + /* set endpoint4 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT4, USBD2_EP4_TX_SIZE); + + /* set endpoint5 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT5, USBD2_EP5_TX_SIZE); + + /* set endpoint6 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT6, USBD2_EP6_TX_SIZE); + + /* set endpoint7 tx fifo size */ + usb_set_tx_fifo(usbx, USB_EPT7, USBD2_EP7_TX_SIZE); + } + } +#endif +} + +/** + * @brief usb device core initialization + * @param udev: to the structure of usbd_core_type + * @param usb_reg: usb otgfs peripheral global register + * this parameter can be one of the following values: + * OTG1_GLOBAL , OTG2_GLOBAL + * @param class_handler: usb class handler + * @param desc_handler: device config handler + * @param core_id: usb core id number + * @retval usb_sts_type + */ +usb_sts_type usbd_core_init(usbd_core_type *udev, + usb_reg_type *usb_reg, + usbd_class_handler *class_handler, + usbd_desc_handler *desc_handler, + uint8_t core_id) +{ + usb_reg_type *usbx; + otg_device_type *dev; + otg_eptin_type *ept_in; + otg_eptout_type *ept_out; + uint32_t i_index; + + udev->usb_reg = usb_reg; + usbx = usb_reg; + dev = OTG_DEVICE(usbx); + + /* set connect state */ + udev->conn_state = USB_CONN_STATE_DEFAULT; + + /* device class config */ + udev->device_addr = 0; + udev->class_handler = class_handler; + udev->desc_handler = desc_handler; + /* set device disconnect */ + usbd_disconnect(udev); + + /* set endpoint to default status */ + usb_ept_default_init(udev); + + /* disable usb global interrupt */ + usb_interrupt_disable(usbx); + + /* init global register */ + usb_global_init(usbx); + + /* set device mode */ + usb_global_set_mode(usbx, OTG_DEVICE_MODE); + + /* open phy clock */ + usb_open_phy_clk(udev->usb_reg); + + /* set periodic frame interval */ + dev->dcfg_bit.perfrint = DCFG_PERFRINT_80; + + /* set device speed to full-speed */ + dev->dcfg_bit.devspd = USB_DCFG_FULL_SPEED; + + /* flush all tx fifo */ + usb_flush_tx_fifo(usbx, 16); + + /* flush share rx fifo */ + usb_flush_rx_fifo(usbx); + + /* clear all endpoint interrupt flag and mask */ + dev->daint = 0xFFFFFFFF; + dev->daintmsk = 0; + dev->diepmsk = 0; + dev->doepmsk = 0; + + for(i_index = 0; i_index < USB_EPT_MAX_NUM; i_index ++) + { + usbx->dieptxfn[i_index] = 0; + } + + /* endpoint fifo alloc */ + usbd_fifo_alloc(udev); + + /* disable all in endpoint */ + for(i_index = 0; i_index < USB_EPT_MAX_NUM; i_index ++) + { + ept_in = USB_INEPT(usbx, i_index); + if(ept_in->diepctl_bit.eptena) + { + ept_in->diepctl = 0; + ept_in->diepctl_bit.eptdis = TRUE; + ept_in->diepctl_bit.snak = TRUE; + } + else + { + ept_in->diepctl = 0; + } + ept_in->dieptsiz = 0; + ept_in->diepint = 0xFF; + } + + /* disable all out endpoint */ + for(i_index = 0; i_index < USB_EPT_MAX_NUM; i_index ++) + { + ept_out = USB_OUTEPT(usbx, i_index); + if(ept_out->doepctl_bit.eptena) + { + ept_out->doepctl = 0; + ept_out->doepctl_bit.eptdis = TRUE; + ept_out->doepctl_bit.snak = TRUE; + } + else + { + ept_out->doepctl = 0; + } + ept_out->doeptsiz = 0; + ept_out->doepint = 0xFF; + } + dev->diepmsk_bit.txfifoudrmsk = TRUE; + + /* clear global interrupt and mask */ + usbx->gintmsk = 0; + usbx->gintsts = 0xBFFFFFFF; + + /* enable global interrupt mask */ + usbx->gintmsk = USB_OTG_SOF_INT | USB_OTG_RXFLVL_INT | + USB_OTG_USBSUSP_INT | USB_OTG_USBRST_INT | + USB_OTG_ENUMDONE_INT | USB_OTG_IEPT_INT | + USB_OTG_OEPT_INT | USB_OTG_INCOMISOIN_INT | + USB_OTG_INCOMPIP_INCOMPISOOUT_INT | USB_OTG_WKUP_INT | + USB_OTG_OTGINT_INT; + + /* usb connect */ + usbd_connect(udev); + + /* enable global interrupt */ + usb_interrupt_enable(usbx); + + return USB_OK; + +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/armlib/at32_usb/usb_drivers/src/usbd_int.c b/armlib/at32_usb/usb_drivers/src/usbd_int.c new file mode 100644 index 000000000..fe15df0cd --- /dev/null +++ b/armlib/at32_usb/usb_drivers/src/usbd_int.c @@ -0,0 +1,540 @@ +/** + ************************************************************************** + * @file usbd_int.c + * @brief usb interrupt request + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ +#include "usbd_int.h" + +/** @addtogroup AT32F435_437_middlewares_usbd_drivers + * @{ + */ + +/** @defgroup USBD_drivers_interrupt + * @brief usb device interrupt + * @{ + */ + +/** @defgroup USBD_int_private_functions + * @{ + */ + +/** + * @brief usb device interrput request handler. + * @param otgdev: to the structure of otg_core_type + * @retval none + */ +void usbd_irq_handler(otg_core_type *otgdev) +{ + otg_global_type *usbx = otgdev->usb_reg; + usbd_core_type *udev = &otgdev->dev; + uint32_t intsts = usb_global_get_all_interrupt(usbx); + + /* check current device mode */ + if(usbx->gintsts_bit.curmode == 0) + { + /* mode mismatch interrupt */ + if(intsts & USB_OTG_MODEMIS_FLAG) + { + usb_global_clear_interrupt(usbx, USB_OTG_MODEMIS_FLAG); + } + + /* in endpoint interrupt */ + if(intsts & USB_OTG_IEPT_FLAG) + { + usbd_inept_handler(udev); + } + + /* out endpoint interrupt */ + if(intsts & USB_OTG_OEPT_FLAG) + { + usbd_outept_handler(udev); + } + + /* usb reset interrupt */ + if(intsts & USB_OTG_USBRST_FLAG) + { + usbd_reset_handler(udev); + usb_global_clear_interrupt(usbx, USB_OTG_USBRST_FLAG); + } + + /* sof interrupt */ + if(intsts & USB_OTG_SOF_FLAG) + { + usbd_sof_handler(udev); + usb_global_clear_interrupt(usbx, USB_OTG_SOF_FLAG); + } + + /* enumeration done interrupt */ + if(intsts & USB_OTG_ENUMDONE_FLAG) + { + usbd_enumdone_handler(udev); + usb_global_clear_interrupt(usbx, USB_OTG_ENUMDONE_FLAG); + } + + /* rx non-empty interrupt, indicates that there is at least one + data packet pending to be read in rx fifo */ + if(intsts & USB_OTG_RXFLVL_FLAG) + { + usbd_rxflvl_handler(udev); + } + + /* incomplete isochronous in transfer interrupt */ + if(intsts & USB_OTG_INCOMISOIN_FLAG) + { + usbd_incomisioin_handler(udev); + usb_global_clear_interrupt(usbx, USB_OTG_INCOMISOIN_FLAG); + } + #ifndef USB_VBUS_IGNORE + /* disconnect detected interrupt */ + if(intsts & USB_OTG_OTGINT_FLAG) + { + uint32_t tmp = udev->usb_reg->gotgint; + if(udev->usb_reg->gotgint_bit.sesenddet) + usbd_discon_handler(udev); + udev->usb_reg->gotgint = tmp; + usb_global_clear_interrupt(usbx, USB_OTG_OTGINT_FLAG); + } +#endif + /* incomplete isochronous out transfer interrupt */ + if(intsts & USB_OTG_INCOMPIP_INCOMPISOOUT_FLAG) + { + usbd_incomisoout_handler(udev); + usb_global_clear_interrupt(usbx, USB_OTG_INCOMPIP_INCOMPISOOUT_FLAG); + } + + /* resume/remote wakeup interrupt */ + if(intsts & USB_OTG_WKUP_FLAG) + { + usbd_wakeup_handler(udev); + usb_global_clear_interrupt(usbx, USB_OTG_WKUP_FLAG); + } + + /* usb suspend interrupt */ + if(intsts & USB_OTG_USBSUSP_FLAG) + { + usbd_suspend_handler(udev); + usb_global_clear_interrupt(usbx, USB_OTG_USBSUSP_FLAG); + } + } +} + +/** + * @brief usb write tx fifo. + * @param udev: to the structure of usbd_core_type + * @param ept_num: endpoint number + * @retval none + */ +void usb_write_empty_txfifo(usbd_core_type *udev, uint32_t ept_num) +{ + otg_global_type *usbx = udev->usb_reg; + usb_ept_info *ept_info = &udev->ept_in[ept_num]; + uint32_t length = ept_info->total_len - ept_info->trans_len; + uint32_t wlen = 0; + + if(length > ept_info->maxpacket) + { + length = ept_info->maxpacket; + } + wlen = (length + 3) / 4; + + while((USB_INEPT(usbx, ept_num)->dtxfsts & USB_OTG_DTXFSTS_INEPTFSAV) > wlen && + (ept_info->trans_len < ept_info->total_len) && (ept_info->total_len != 0)) + { + length = ept_info->total_len - ept_info->trans_len; + if(length > ept_info->maxpacket) + { + length = ept_info->maxpacket; + } + wlen = (length + 3) / 4; + usb_write_packet(usbx, ept_info->trans_buf, ept_num, length); + + ept_info->trans_buf += length; + ept_info->trans_len += length; + + } + if(length <= 0) + { + OTG_DEVICE(usbx)->diepempmsk &= ~(0x1 << ept_num); + } +} + + +/** + * @brief usb in endpoint handler + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_inept_handler(usbd_core_type *udev) +{ + otg_global_type *usbx = udev->usb_reg; + uint32_t ept_num = 0, ept_int; + uint32_t intsts; + + /*get all endpoint interrut */ + intsts = usb_get_all_in_interrupt(usbx); + while(intsts) + { + if(intsts & 0x1) + { + /* get endpoint interrupt flag */ + ept_int = usb_ept_in_interrupt(usbx, ept_num); + + /* transfer completed interrupt */ + if(ept_int & USB_OTG_DIEPINT_XFERC_FLAG) + { + OTG_DEVICE(usbx)->diepempmsk &= ~(1 << ept_num); + usb_ept_in_clear(usbx, ept_num , USB_OTG_DIEPINT_XFERC_FLAG); + usbd_core_in_handler(udev, ept_num); + } + + /* timeout condition interrupt */ + if(ept_int & USB_OTG_DIEPINT_TIMEOUT_FLAG) + { + usb_ept_in_clear(usbx, ept_num , USB_OTG_DIEPINT_TIMEOUT_FLAG); + } + + /* in token received when tx fifo is empty */ + if(ept_int & USB_OTG_DIEPINT_INTKNTXFEMP_FLAG) + { + usb_ept_in_clear(usbx, ept_num , USB_OTG_DIEPINT_INTKNTXFEMP_FLAG); + } + + /* in endpoint nak effective */ + if(ept_int & USB_OTG_DIEPINT_INEPTNAK_FLAG) + { + usb_ept_in_clear(usbx, ept_num , USB_OTG_DIEPINT_INEPTNAK_FLAG); + } + + /* endpoint disable interrupt */ + if(ept_int & USB_OTG_DIEPINT_EPTDISD_FLAG) + { + usb_ept_in_clear(usbx, ept_num , USB_OTG_DIEPINT_EPTDISD_FLAG); + } + + /* transmit fifo empty interrupt */ + if(ept_int & USB_OTG_DIEPINT_TXFEMP_FLAG) + { + usb_write_empty_txfifo(udev, ept_num); + } + } + ept_num ++; + intsts >>= 1; + } +} + +/** + * @brief usb out endpoint handler + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_outept_handler(usbd_core_type *udev) +{ + otg_global_type *usbx = udev->usb_reg; + uint32_t ept_num = 0, ept_int; + uint32_t intsts; + + /* get all out endpoint interrupt */ + intsts = usb_get_all_out_interrupt(usbx); + + while(intsts) + { + if(intsts & 0x1) + { + /* get out endpoint interrupt */ + ept_int = usb_ept_out_interrupt(usbx, ept_num); + + /* transfer completed interrupt */ + if(ept_int & USB_OTG_DOEPINT_XFERC_FLAG) + { + usb_ept_out_clear(usbx, ept_num , USB_OTG_DOEPINT_XFERC_FLAG); + usbd_core_out_handler(udev, ept_num); + } + + /* setup phase done interrupt */ + if(ept_int & USB_OTG_DOEPINT_SETUP_FLAG) + { + usb_ept_out_clear(usbx, ept_num , USB_OTG_DOEPINT_SETUP_FLAG); + usbd_core_setup_handler(udev, ept_num); + if(udev->device_addr != 0) + { + OTG_DEVICE(udev->usb_reg)->dcfg_bit.devaddr = udev->device_addr; + udev->device_addr = 0; + } + } + + /* endpoint disable interrupt */ + if(ept_int & USB_OTG_DOEPINT_OUTTEPD_FLAG) + { + usb_ept_out_clear(usbx, ept_num , USB_OTG_DOEPINT_OUTTEPD_FLAG); + } + } + ept_num ++; + intsts >>= 1; + } +} + +/** + * @brief usb enumeration done handler + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_enumdone_handler(usbd_core_type *udev) +{ + otg_global_type *usbx = udev->usb_reg; + + usb_ept0_setup(usbx); + + usbx->gusbcfg_bit.usbtrdtim = USB_TRDTIM_16; + + /* open endpoint 0 out */ + usbd_ept_open(udev, 0x00, EPT_CONTROL_TYPE, 0x40); + + /* open endpoint 0 in */ + usbd_ept_open(udev, 0x80, EPT_CONTROL_TYPE, 0x40); + + /* usb connect state set to default */ + udev->conn_state = USB_CONN_STATE_DEFAULT; + + /* clear callback */ + if(udev->class_handler->clear_handler != 0) + udev->class_handler->clear_handler(udev); +} + +/** + * @brief usb rx non-empty handler + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_rxflvl_handler(usbd_core_type *udev) +{ + otg_global_type *usbx = udev->usb_reg; + uint32_t stsp; + uint32_t count; + uint32_t pktsts; + usb_ept_info *ept_info; + + /* disable rxflvl interrupt */ + usb_global_interrupt_enable(usbx, USB_OTG_RXFLVL_INT, FALSE); + + /* get rx status */ + stsp = usbx->grxstsp; + + /*get the byte count of receive */ + count = (stsp & USB_OTG_GRXSTSP_BCNT) >> 4; + + /* get packet status */ + pktsts = (stsp &USB_OTG_GRXSTSP_PKTSTS) >> 17; + + /* get endpoint infomation struct */ + ept_info = &udev->ept_out[stsp & USB_OTG_GRXSTSP_EPTNUM]; + + /* received out data packet */ + if(pktsts == USB_OUT_STS_DATA) + { + if(count != 0) + { + /* read packet to buffer */ + usb_read_packet(usbx, ept_info->trans_buf, (stsp & USB_OTG_GRXSTSP_EPTNUM), count); + ept_info->trans_buf += count; + ept_info->trans_len += count; + + } + } + /* setup data received */ + else if ( pktsts == USB_SETUP_STS_DATA) + { + /* read packet to buffer */ + usb_read_packet(usbx, udev->setup_buffer, (stsp & USB_OTG_GRXSTSP_EPTNUM), count); + ept_info->trans_len += count; + } + + /* enable rxflvl interrupt */ + usb_global_interrupt_enable(usbx, USB_OTG_RXFLVL_INT, TRUE); + +} + +/** + * @brief usb disconnect handler + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_discon_handler(usbd_core_type *udev) +{ + /* disconnect callback handler */ + if(udev->class_handler->event_handler != 0) + udev->class_handler->event_handler(udev, USBD_DISCONNECT_EVNET); +} + + +/** + * @brief usb incomplete out handler + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_incomisoout_handler(usbd_core_type *udev) +{ + if(udev->class_handler->event_handler != 0) + udev->class_handler->event_handler(udev, USBD_OUTISOINCOM_EVENT); +} + +/** + * @brief usb incomplete in handler + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_incomisioin_handler(usbd_core_type *udev) +{ + if(udev->class_handler->event_handler != 0) + udev->class_handler->event_handler(udev, USBD_INISOINCOM_EVENT); +} + +/** + * @brief usb device reset interrupt request handler. + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_reset_handler(usbd_core_type *udev) +{ + otg_global_type *usbx = udev->usb_reg; + otg_device_type *dev = OTG_DEVICE(usbx); + uint32_t i_index = 0; + + /* disable remote wakeup singal */ + dev->dctl_bit.rwkupsig = FALSE; + + /* endpoint fifo alloc */ + usbd_fifo_alloc(udev); + + /* flush all tx fifo */ + usb_flush_tx_fifo(usbx, 0x10); + + /* clear in and out endpoint interrupt flag */ + for(i_index = 0; i_index < USB_EPT_MAX_NUM; i_index ++) + { + USB_INEPT(usbx, i_index)->diepint = 0xFFFF; + USB_INEPT(usbx, i_index)->diepctl_bit.stall = FALSE; + USB_INEPT(usbx, i_index)->diepctl_bit.snak = TRUE; + USB_OUTEPT(usbx, i_index)->doepint = 0xFFFF; + USB_OUTEPT(usbx, i_index)->doepctl_bit.stall = FALSE; + USB_OUTEPT(usbx, i_index)->doepctl_bit.snak = TRUE; + } + + /* clear endpoint flag */ + dev->daint = 0xFFFFFFFF; + + /*clear endpoint interrupt mask */ + dev->daintmsk = 0x10001; + + /* enable out endpoint xfer, eptdis, setup interrupt mask */ + dev->doepmsk_bit.xfercmsk = TRUE; + dev->doepmsk_bit.eptdismsk = TRUE; + dev->doepmsk_bit.setupmsk = TRUE; + + /* enable in endpoint xfer, eptdis, timeout interrupt mask */ + dev->diepmsk_bit.xfercmsk = TRUE; + dev->diepmsk_bit.eptdismsk = TRUE; + dev->diepmsk_bit.timeoutmsk = TRUE; + + /* set device address to 0 */ + usb_set_address(usbx, 0); + + /* enable endpoint 0 */ + usb_ept0_start(usbx); + + /* usb connect state set to default */ + udev->conn_state = USB_CONN_STATE_DEFAULT; + + /* user define reset event */ + if(udev->class_handler->event_handler) + udev->class_handler->event_handler(udev, USBD_RESET_EVENT); +} + +/** + * @brief usb device sof interrupt request handler. + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_sof_handler(usbd_core_type *udev) +{ + /* user sof handler in class define */ + if(udev->class_handler->sof_handler) + udev->class_handler->sof_handler(udev); +} + +/** + * @brief usb device suspend interrupt request handler. + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_suspend_handler(usbd_core_type *udev) +{ + otg_global_type *usbx = udev->usb_reg; + + if(OTG_DEVICE(usbx)->dsts_bit.suspsts) + { + /* save connect state */ + udev->old_conn_state = udev->conn_state; + + /* set current state to suspend */ + udev->conn_state = USB_CONN_STATE_SUSPENDED; + + /* enter suspend mode */ + usbd_enter_suspend(udev); + + /* user suspend handler */ + if(udev->class_handler->event_handler != 0) + udev->class_handler->event_handler(udev, USBD_SUSPEND_EVENT); + } +} + +/** + * @brief usb device wakup interrupt request handler. + * @param udev: to the structure of usbd_core_type + * @retval none + */ +void usbd_wakeup_handler(usbd_core_type *udev) +{ + otg_global_type *usbx = udev->usb_reg; + + /* clear remote wakeup bit */ + OTG_DEVICE(usbx)->dctl_bit.rwkupsig = FALSE; + + /* exit suspend mode */ + usb_open_phy_clk(udev->usb_reg); + + /* restore connect state */ + udev->conn_state = udev->old_conn_state; + + /* user suspend handler */ + if(udev->class_handler->event_handler != 0) + udev->class_handler->event_handler(udev, USBD_WAKEUP_EVENT); +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_usb/usb_drivers/src/usbd_sdr.c b/armlib/at32_usb/usb_drivers/src/usbd_sdr.c new file mode 100644 index 000000000..534b2e074 --- /dev/null +++ b/armlib/at32_usb/usb_drivers/src/usbd_sdr.c @@ -0,0 +1,565 @@ +/** + ************************************************************************** + * @file usbd_sdr.c + * @brief usb standard device request + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ +#include "usbd_sdr.h" + +/** @addtogroup AT32F435_437_middlewares_usbd_drivers + * @{ + */ + +/** @defgroup USBD_drivers_standard_request + * @brief usb device standard_request + * @{ + */ + +/** @defgroup USBD_sdr_private_functions + * @{ + */ + +static usb_sts_type usbd_get_descriptor(usbd_core_type *udev); +static usb_sts_type usbd_set_address(usbd_core_type *udev); +static usb_sts_type usbd_get_status(usbd_core_type *udev); +static usb_sts_type usbd_clear_feature(usbd_core_type *udev); +static usb_sts_type usbd_set_feature(usbd_core_type *udev); +static usb_sts_type usbd_get_configuration(usbd_core_type *udev); +static usb_sts_type usbd_set_configuration(usbd_core_type *udev); + +/** + * @brief usb parse standard setup request + * @param setup: setup structure + * @param buf: setup buffer + * @retval none + */ +void usbd_setup_request_parse(usb_setup_type *setup, uint8_t *buf) +{ + setup->bmRequestType = *(uint8_t *) buf; + setup->bRequest = *(uint8_t *) (buf + 1); + setup->wValue = SWAPBYTE(buf + 2); + setup->wIndex = SWAPBYTE(buf + 4); + setup->wLength = SWAPBYTE(buf + 6); +} + +/** + * @brief get usb standard device description request + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type usbd_get_descriptor(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + uint16_t len = 0; + usbd_desc_t *desc = NULL; + uint8_t desc_type = udev->setup.wValue >> 8; + switch(desc_type) + { + case USB_DESCIPTOR_TYPE_DEVICE: + desc = udev->desc_handler->get_device_descriptor(); + break; + case USB_DESCIPTOR_TYPE_CONFIGURATION: + desc = udev->desc_handler->get_device_configuration(); + break; + case USB_DESCIPTOR_TYPE_STRING: + { + uint8_t str_desc = (uint8_t)udev->setup.wValue; + switch(str_desc) + { + case USB_LANGID_STRING: + desc = udev->desc_handler->get_device_lang_id(); + break; + case USB_MFC_STRING: + desc = udev->desc_handler->get_device_manufacturer_string(); + break; + case USB_PRODUCT_STRING: + desc = udev->desc_handler->get_device_product_string(); + break; + case USB_SERIAL_STRING: + desc = udev->desc_handler->get_device_serial_string(); + break; + case USB_CONFIG_STRING: + desc = udev->desc_handler->get_device_config_string(); + break; + case USB_INTERFACE_STRING: + desc = udev->desc_handler->get_device_interface_string(); + break; + case USB_WINUSB_OS_STRING: +#if (USBD_SUPPORT_WINUSB == 1) + if(udev->desc_handler->get_device_winusb_os_string != NULL) + { + desc = udev->desc_handler->get_device_winusb_os_string(); + } + else + { + usbd_ctrl_unsupport(udev); + } +#else + usbd_ctrl_unsupport(udev); +#endif + break; + default: + udev->class_handler->setup_handler(udev, &udev->setup); + return ret; + } + break; + } + case USB_DESCIPTOR_TYPE_DEVICE_QUALIFIER: + usbd_ctrl_unsupport(udev); + break; + case USB_DESCIPTOR_TYPE_OTHER_SPEED: + usbd_ctrl_unsupport(udev); + return ret; + default: + usbd_ctrl_unsupport(udev); + return ret; + } + + if(desc != NULL) + { + if((desc->length != 0) && (udev->setup.wLength != 0)) + { + len = MIN(desc->length , udev->setup.wLength); + usbd_ctrl_send(udev, desc->descriptor, len); + } + } + return ret; +} + +/** + * @brief this request sets the device address + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type usbd_set_address(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + usb_setup_type *setup = &udev->setup; + uint8_t dev_addr; + + /* if wIndex or wLength are non-zero, then the behavior of + the device is not specified + */ + if(setup->wIndex == 0 && setup->wLength == 0) + { + dev_addr = (uint8_t)(setup->wValue) & 0x7f; + + /* device behavior when this request is received + while the device is in the configured state is not specified.*/ + if(udev->conn_state == USB_CONN_STATE_CONFIGURED ) + { + usbd_ctrl_unsupport(udev); + } + else + { + udev->device_addr = dev_addr; + usbd_set_device_addr(udev, udev->device_addr); + + if(dev_addr != 0) + { + udev->conn_state = USB_CONN_STATE_ADDRESSED; + } + else + { + udev->conn_state = USB_CONN_STATE_DEFAULT; + } + usbd_ctrl_send_status(udev); + } + } + else + { + usbd_ctrl_unsupport(udev); + } + return ret; +} + +/** + * @brief get usb status request + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type usbd_get_status(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + switch(udev->conn_state) + { + case USB_CONN_STATE_ADDRESSED: + case USB_CONN_STATE_CONFIGURED: + if(udev->remote_wakup) + { + udev->config_status |= USB_CONF_REMOTE_WAKEUP; + } + usbd_ctrl_send(udev, (uint8_t *)(&udev->config_status), 2); + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + return ret; +} + +/** + * @brief clear usb feature request + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type usbd_clear_feature(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + usb_setup_type *setup = &udev->setup; + switch(udev->conn_state) + { + case USB_CONN_STATE_ADDRESSED: + case USB_CONN_STATE_CONFIGURED: + if(setup->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + udev->remote_wakup = 0; + udev->config_status &= ~USB_CONF_REMOTE_WAKEUP; + udev->class_handler->setup_handler(udev, &udev->setup); + usbd_ctrl_send_status(udev); + } + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + return ret; +} + +/** + * @brief set usb feature request + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type usbd_set_feature(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + usb_setup_type *setup = &udev->setup; + if(setup->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + udev->remote_wakup = 1; + udev->class_handler->setup_handler(udev, &udev->setup); + usbd_ctrl_send_status(udev); + } + else + { + usbd_ctrl_unsupport(udev); + } + return ret; +} + +/** + * @brief get usb configuration request + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type usbd_get_configuration(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + usb_setup_type *setup = &udev->setup; + if(setup->wLength != 1) + { + usbd_ctrl_unsupport(udev); + } + else + { + switch(udev->conn_state) + { + case USB_CONN_STATE_ADDRESSED: + udev->default_config = 0; + usbd_ctrl_send(udev, (uint8_t *)(&udev->default_config), 1); + break; + case USB_CONN_STATE_CONFIGURED: + usbd_ctrl_send(udev, (uint8_t *)(&udev->dev_config), 1); + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + } + return ret; +} + +/** + * @brief sets the usb device configuration request + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type usbd_set_configuration(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + static uint8_t config_value; + usb_setup_type *setup = &udev->setup; + config_value = (uint8_t)setup->wValue; + + if(setup->wIndex == 0 && setup->wLength == 0) + { + switch(udev->conn_state) + { + case USB_CONN_STATE_ADDRESSED: + if(config_value) + { + udev->dev_config = config_value; + udev->conn_state = USB_CONN_STATE_CONFIGURED; + udev->class_handler->init_handler(udev); + usbd_ctrl_send_status(udev); + } + else + { + usbd_ctrl_send_status(udev); + } + + break; + case USB_CONN_STATE_CONFIGURED: + if(config_value == 0) + { + udev->conn_state = USB_CONN_STATE_ADDRESSED; + udev->dev_config = config_value; + udev->class_handler->clear_handler(udev); + usbd_ctrl_send_status(udev); + } + else if(config_value != udev->dev_config) + { + udev->class_handler->clear_handler(udev); + udev->dev_config = config_value; + udev->class_handler->init_handler(udev); + usbd_ctrl_send_status(udev); + } + else + { + usbd_ctrl_send_status(udev); + } + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + } + else + { + usbd_ctrl_unsupport(udev); + } + return ret; +} + +/** + * @brief standard usb device requests + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +usb_sts_type usbd_device_request(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + usb_setup_type *setup = &udev->setup; + if((setup->bmRequestType & USB_REQ_TYPE_RESERVED) != USB_REQ_TYPE_STANDARD) + { + udev->class_handler->setup_handler(udev, &udev->setup); + return ret; + } + switch(udev->setup.bRequest) + { + case USB_STD_REQ_GET_STATUS: + usbd_get_status(udev); + break; + case USB_STD_REQ_CLEAR_FEATURE: + usbd_clear_feature(udev); + break; + case USB_STD_REQ_SET_FEATURE: + usbd_set_feature(udev); + break; + case USB_STD_REQ_SET_ADDRESS: + usbd_set_address(udev); + break; + case USB_STD_REQ_GET_DESCRIPTOR: + usbd_get_descriptor(udev); + break; + case USB_STD_REQ_GET_CONFIGURATION: + usbd_get_configuration(udev); + break; + case USB_STD_REQ_SET_CONFIGURATION: + usbd_set_configuration(udev); + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + return ret; +} + +/** + * @brief standard usb interface requests + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +usb_sts_type usbd_interface_request(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + usb_setup_type *setup = &udev->setup; + switch(udev->conn_state) + { + case USB_CONN_STATE_DEFAULT: + case USB_CONN_STATE_ADDRESSED: + case USB_CONN_STATE_CONFIGURED: + ret = udev->class_handler->setup_handler(udev, &udev->setup); + if(setup->wLength == 0 && ret == USB_OK) + { + usbd_ctrl_send_status(udev); + } + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + return ret; +} + +/** + * @brief standard usb endpoint requests + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +usb_sts_type usbd_endpoint_request(usbd_core_type *udev) +{ + usb_sts_type ret = USB_OK; + usb_setup_type *setup = &udev->setup; + uint8_t ept_addr = LBYTE(setup->wIndex); + usb_ept_info *ept_info; + + if((setup->bmRequestType & USB_REQ_TYPE_RESERVED) != USB_REQ_TYPE_STANDARD) + { + udev->class_handler->setup_handler(udev, &udev->setup); + return ret; + } + switch(setup->bRequest) + { + case USB_STD_REQ_GET_STATUS: + switch(udev->conn_state) + { + case USB_CONN_STATE_ADDRESSED: + if((ept_addr & 0x7F) != 0) + { + usbd_set_stall(udev, ept_addr); + } + if((ept_addr & 0x80) != 0) + { + ept_info = &udev->ept_in[ept_addr & 0x7F]; + } + else + { + ept_info = &udev->ept_out[ept_addr & 0x7F]; + } + ept_info->status = 0x0000; + usbd_ctrl_send(udev, (uint8_t *)(&ept_info->status), 2); + + break; + case USB_CONN_STATE_CONFIGURED: + { + if((ept_addr & 0x80) != 0) + { + ept_info = &udev->ept_in[ept_addr & 0x7F]; + } + else + { + ept_info = &udev->ept_out[ept_addr & 0x7F]; + } + if(ept_info->stall == 1) + { + ept_info->status = 0x0001; + } + else + { + ept_info->status = 0x0000; + } + usbd_ctrl_send(udev, (uint8_t *)(&ept_info->status), 2); + } + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + break; + case USB_STD_REQ_CLEAR_FEATURE: + switch(udev->conn_state) + { + case USB_CONN_STATE_ADDRESSED: + if((ept_addr != 0x00) && (ept_addr != 0x80)) + { + usbd_set_stall(udev, ept_addr); + } + break; + case USB_CONN_STATE_CONFIGURED: + if(setup->wValue == USB_FEATURE_EPT_HALT) + { + if((ept_addr & 0x7F) != 0x00 ) + { + usbd_clear_stall(udev, ept_addr); + udev->class_handler->setup_handler(udev, &udev->setup); + } + usbd_ctrl_send_status(udev); + } + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + break; + case USB_STD_REQ_SET_FEATURE: + switch(udev->conn_state) + { + case USB_CONN_STATE_ADDRESSED: + if((ept_addr != 0x00) && (ept_addr != 0x80)) + { + usbd_set_stall(udev, ept_addr); + } + break; + case USB_CONN_STATE_CONFIGURED: + if(setup->wValue == USB_FEATURE_EPT_HALT) + { + if((ept_addr != 0x00) && (ept_addr != 0x80)) + { + usbd_set_stall(udev, ept_addr); + } + } + udev->class_handler->setup_handler(udev, &udev->setup); + usbd_ctrl_send_status(udev); + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + break; + default: + usbd_ctrl_unsupport(udev); + break; + } + return ret; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/armlib/at32_usb/usb_drivers/src/usbh_core.c b/armlib/at32_usb/usb_drivers/src/usbh_core.c new file mode 100644 index 000000000..205ec473b --- /dev/null +++ b/armlib/at32_usb/usb_drivers/src/usbh_core.c @@ -0,0 +1,1239 @@ +/** + ************************************************************************** + * @file usbh_core.c + * @brief usb host driver + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ +#include "usbh_core.h" +#include "usb_core.h" +#include "usbh_ctrl.h" +#include "usb_conf.h" + +/** @addtogroup AT32F435_437_middlewares_usbh_drivers + * @{ + */ + +/** @defgroup USBH_drivers_core + * @brief usb host drivers core + * @{ + */ + +/** @defgroup USBH_core_private_functions + * @{ + */ + +static void usbh_attached(usbh_core_type *uhost); +static void usbh_enumeration(usbh_core_type *uhost); +static void usbh_class_request(usbh_core_type *uhost); +static void usbh_class(usbh_core_type *uhost); +static void usbh_suspend(usbh_core_type *uhost); +static void usbh_wakeup(usbh_core_type *uhost); +static void usbh_disconnect(usbh_core_type *uhost); +/** + * @brief usb host free channel + * @param uhost: to the structure of usbh_core_type + * @param index: channle number + * @retval none + */ +void usbh_free_channel(usbh_core_type *uhost, uint8_t index) +{ + if(index < USB_HOST_CHANNEL_NUM) + { + /* free host channel */ + uhost->channel[index] = 0x0; + } +} + +/** + * @brief get usb host free channel + * @param uhost: to the structure of usbh_core_type + * @retval channel index + */ +uint16_t usbh_get_free_channel(usbh_core_type *uhost) +{ + uint16_t i_index = 0; + for(i_index = 0; i_index < USB_HOST_CHANNEL_NUM; i_index ++) + { + /* find unuse channel */ + if((uhost->channel[i_index] & HCH_USED) == 0) + { + /* return channel index */ + return i_index; + } + } + return HCH_ERROR; +} + + +/** + * @brief usb host set toggle + * @param uhost: to the structure of usbh_core_type + * @param hc_num: channel number + * @param toggle: toggle value + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_set_toggle(usbh_core_type *uhost, uint8_t hc_num, uint8_t toggle) +{ + if(uhost->hch[hc_num].dir) + { + /* direction in */ + uhost->hch[hc_num].toggle_in = toggle; + } + else + { + /* direction out */ + uhost->hch[hc_num].toggle_out = toggle; + } + return USB_OK; +} + +/** + * @brief usb host in out request + * @param uhost: to the structure of usbh_core_type + * @param hc_num: channel number + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_in_out_request(usbh_core_type *uhost, uint8_t hc_num) +{ + usb_sts_type status = USB_OK; + uint32_t n_packet = 0; + uint32_t num_words = 0; + uint32_t tmp; + otg_global_type *usbx = uhost->usb_reg; + otg_hchannel_type *ch = USB_CHL(uhost->usb_reg, hc_num); + + /* set usb request block to idle */ + uhost->urb_state[hc_num] = URB_IDLE; + uhost->hch[hc_num].state = HCH_IDLE; + + /* set usb channel transmit count to zero */ + uhost->hch[hc_num].trans_count = 0; + + /* check transmit data len */ + if(uhost->hch[hc_num].trans_len > 0) + { + /* count how many packet need to send */ + n_packet = (uhost->hch[hc_num].trans_len + \ + uhost->hch[hc_num].maxpacket - 1) / \ + uhost->hch[hc_num].maxpacket; + + /* packet count max 256 */ + if(n_packet > 256) + { + n_packet = 256; + uhost->hch[hc_num].trans_len = n_packet * uhost->hch[hc_num].maxpacket; + } + } + else + { + /* zero data len */ + n_packet = 1; + } + + /* direction is in */ + if(uhost->hch[hc_num].dir) + { + uhost->hch[hc_num].trans_len = n_packet * uhost->hch[hc_num].maxpacket; + } + + /* set transfer information to channel register */ + ch->hctsiz = (uhost->hch[hc_num].trans_len & USB_OTG_HCTSIZ_XFERSIZE) | + ((n_packet << 19) & USB_OTG_HCTSIZ_PKTCNT) | + ((uhost->hch[hc_num].data_pid << 29) & USB_OTG_HCTSIZ_PID); + + /* set odd frame */ + ch->hcchar_bit.oddfrm = !(OTG_HOST(uhost->usb_reg)->hfnum & 0x1); + + /* clear channel disable bit and enable channel */ + tmp = ch->hcchar; + tmp &= ~(USB_OTG_HCCHAR_CHDIS); + tmp |= USB_OTG_HCCHAR_CHENA; + ch->hcchar = tmp; + + /* channel direction is out and transfer len > 0 */ + if((uhost->hch[hc_num].dir == 0) && + (uhost->hch[hc_num].trans_len > 0 )) + { + switch(uhost->hch[hc_num].ept_type) + { + case EPT_CONTROL_TYPE: + case EPT_BULK_TYPE: + num_words = (uhost->hch[hc_num].trans_len + 3) / 4; + + /* non-periodic transfer */ + if(num_words > usbx->gnptxsts_bit.nptxfspcavail) + { + usbx->gintmsk_bit.nptxfempmsk = 1; + } + break; + case EPT_ISO_TYPE: + case EPT_INT_TYPE: + num_words = (uhost->hch[hc_num].trans_len + 3) / 4; + + /* periodic transfer */ + if(num_words > OTG_HOST(usbx)->hptxsts_bit.ptxfspcavil) + { + usbx->gintmsk_bit.ptxfempmsk = 1; + } + break; + default: + break; + } + /* write data to fifo */ + usb_write_packet(usbx, uhost->hch[hc_num].trans_buf, + hc_num, uhost->hch[hc_num].trans_len); + } + + return status; +} + +/** + * @brief usb host interrupt receive request + * @param uhost: to the structure of usbh_core_type + * @param hc_num: channel number + * @param buffer: receive buffer + * @param length: receive length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_interrupt_recv(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length) +{ + /* set direction is in */ + uhost->hch[hc_num].dir = 1; + + /* set transfer buffer */ + uhost->hch[hc_num].trans_buf = buffer; + + /* set transfer len*/ + uhost->hch[hc_num].trans_len = length; + + if(uhost->hch[hc_num].toggle_in == 0) + { + /* pid: data0 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA0; + } + else + { + /* pid: data1 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA1; + } + + return usbh_in_out_request(uhost, hc_num); +} + +/** + * @brief usb host interrupt send request + * @param uhost: to the structure of usbh_core_type + * @param hc_num: channel number + * @param buffer: send buffer + * @param length: send length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_interrupt_send(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length) +{ + /* set direction is out */ + uhost->hch[hc_num].dir = 0; + + /* set transfer buffer */ + uhost->hch[hc_num].trans_buf = buffer; + + /* set transfer len*/ + uhost->hch[hc_num].trans_len = length; + + if(uhost->hch[hc_num].toggle_out == 0) + { + /* pid: data0 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA0; + } + else + { + /* pid: data1 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA1; + } + + return usbh_in_out_request(uhost, hc_num); +} + + +/** + * @brief usb host bulk receive request + * @param uhost: to the structure of usbh_core_type + * @param hc_num: channel number + * @param buffer: receive buffer + * @param length: receive length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_bulk_recv(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length) +{ + /* set direction is in */ + uhost->hch[hc_num].dir = 1; + + /* set transfer buffer */ + uhost->hch[hc_num].trans_buf = buffer; + + /* set transfer len*/ + uhost->hch[hc_num].trans_len = length; + + if(uhost->hch[hc_num].toggle_in == 0) + { + /* pid: data0 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA0; + } + else + { + /* pid: data1 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA1; + } + + return usbh_in_out_request(uhost, hc_num); +} + + +/** + * @brief usb host bulk send request + * @param uhost: to the structure of usbh_core_type + * @param hc_num: channel number + * @param buffer: receive buffer + * @param length: receive length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_bulk_send(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length) +{ + /* set direction is out */ + uhost->hch[hc_num].dir = 0; + + /* set transfer buffer */ + uhost->hch[hc_num].trans_buf = buffer; + + /* set transfer len*/ + uhost->hch[hc_num].trans_len = length; + + if(uhost->hch[hc_num].toggle_out == 0) + { + /* pid: data0 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA0; + } + else + { + /* pid: data1 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA1; + } + + return usbh_in_out_request(uhost, hc_num); +} + + +/** + * @brief usb host iso send request + * @param uhost: to the structure of usbh_core_type + * @param hc_num: channel number + * @param buffer: send buffer + * @param length: send length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_isoc_send(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length) +{ + /* set direction is out */ + uhost->hch[hc_num].dir = 0; + + /* set transfer buffer */ + uhost->hch[hc_num].trans_buf = buffer; + + /* set transfer len*/ + uhost->hch[hc_num].trans_len = length; + + /* pid: data0 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA0; + + return usbh_in_out_request(uhost, hc_num); +} + +/** + * @brief usb host iso receive request + * @param uhost: to the structure of usbh_core_type + * @param hc_num: channel number + * @param buffer: receive buffer + * @param length: receive length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_isoc_recv(usbh_core_type *uhost, uint8_t hc_num, + uint8_t *buffer, uint16_t length) +{ + /* set direction is in */ + uhost->hch[hc_num].dir = 1; + + /* set transfer buffer */ + uhost->hch[hc_num].trans_buf = buffer; + + /* set transfer len*/ + uhost->hch[hc_num].trans_len = length; + + /* pid: data0 */ + uhost->hch[hc_num].data_pid = HCH_PID_DATA0; + + return usbh_in_out_request(uhost, hc_num); +} + +/** + * @brief usb host cfg default init + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_cfg_default_init(usbh_core_type *uhost) +{ + /* set global state to idle */ + uhost->global_state = USBH_IDLE; + + /* enumeration state to get description */ + uhost->enum_state = ENUM_GET_MIN_DESC; + + /* request state send */ + uhost->req_state = CMD_SEND; + + /* control transfer state is idle*/ + uhost->ctrl.state = CONTROL_IDLE; + + /* defaut endpoint 0 max size is 8byte */ + uhost->ctrl.ept0_size = 8; + + /* default device address is 0 */ + uhost->dev.address = 0; + + /* default speed is full speed */ + uhost->dev.speed = USB_FULL_SPEED_CORE_ID; + + uhost->timer = 0; + + uhost->ctrl.err_cnt = 0; + + /* free all channel */ + usbh_free_channel(uhost, uhost->ctrl.hch_in); + usbh_free_channel(uhost, uhost->ctrl.hch_out); + return USB_OK; +} + +/** + * @brief usb host enter suspend + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +void usbh_enter_suspend(usbh_core_type *uhost) +{ + otg_host_type *host = OTG_HOST(uhost->usb_reg); + uint32_t hprt_val = host->hprt; + + hprt_val &= ~(USB_OTG_HPRT_PRTENA | USB_OTG_HPRT_PRTENCHNG | + USB_OTG_HPRT_PRTOVRCACT | USB_OTG_HPRT_PRTCONDET); + + /* set port suspend */ + host->hprt = hprt_val | USB_OTG_HPRT_PRTSUSP; + + /* stop phy clock */ + usb_stop_phy_clk(uhost->usb_reg); + +} + +/** + * @brief usb host resume + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +void usbh_resume(usbh_core_type *uhost) +{ + otg_host_type *host = OTG_HOST(uhost->usb_reg); + uint32_t temp = host->hprt; + + /* open phy clock */ + usb_open_phy_clk(uhost->usb_reg); + + /* clear port suspend and set port resume*/ + temp &= ~(USB_OTG_HPRT_PRTENA | USB_OTG_HPRT_PRTENCHNG | + USB_OTG_HPRT_PRTOVRCACT | USB_OTG_HPRT_PRTCONDET + | USB_OTG_HPRT_PRTSUSP); + host->hprt = temp | USB_OTG_HPRT_PRTRES; + + /* delay 20 ms */ + usb_delay_ms(20); + + /*clear port resume */ + temp = host->hprt; + temp &= ~(USB_OTG_HPRT_PRTENA | USB_OTG_HPRT_PRTENCHNG | + USB_OTG_HPRT_PRTOVRCACT | USB_OTG_HPRT_PRTCONDET + | USB_OTG_HPRT_PRTRES); + host->hprt = temp; + usb_delay_ms(5); +} + +/** + * @brief usb host core initialize + * @param uhost: to the structure of usbh_core_type + * @param usb_reg: usb otgfs peripheral global register + * this parameter can be one of the following values: + * OTG1_GLOBAL , OTG2_GLOBAL + * @param class_handler: usb host class handler type pointer + * @param user_handler: usb host user handler type pointer + * @param core_id: usb core select id + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_core_init(usbh_core_type *uhost, + usb_reg_type *usb_reg, + usbh_class_handler_type *class_handler, + usbh_user_handler_type *user_handler, + uint8_t core_id) +{ + usb_sts_type status = USB_OK; + uint32_t i_index; + otg_global_type *usbx = usb_reg; + otg_host_type *host = OTG_HOST(usbx); + uhost->usb_reg = usb_reg; + + /* host class handler */ + uhost->class_handler = class_handler; + uhost->user_handler = user_handler; + + /* host user handler */ + uhost->user_handler->user_init(); + + uhost->timer = 0; + + /* usb host cfg default init */ + usbh_cfg_default_init(uhost); + + /* clear host config to default value */ + for(i_index = 0; i_index < USB_HOST_CHANNEL_NUM; i_index ++) + { + uhost->err_cnt[i_index] = 0; + uhost->xfer_cnt[i_index] = 0; + uhost->hch_state[i_index] = HCH_IDLE; + uhost->hch[0].maxpacket = 8; + } + + /* no device connect */ + uhost->conn_sts = 0; + + /* disable usb interrupt */ + usb_interrupt_disable(usbx); + + /* usb global init */ + usb_global_init(usbx); + + /* set usb host mode */ + usb_global_set_mode(usbx, OTG_HOST_MODE); + + /* open usb phy clock*/ + usb_open_phy_clk(usbx); + + /* clock select */ + usbh_fsls_clksel(usbx, USB_HCFG_CLK_48M); + + /* set support ls and fs device */ + host->hcfg_bit.fslssupp = 0; + + if(usbx == OTG1_GLOBAL) + { + /* set receive fifo size */ + usbx->grxfsiz = USBH_RX_FIFO_SIZE; + + /* set non-periodic transmit fifo start address and depth */ + usbx->gnptxfsiz_ept0tx_bit.nptxfstaddr = USBH_RX_FIFO_SIZE; + usbx->gnptxfsiz_ept0tx_bit.nptxfdep = USBH_NP_TX_FIFO_SIZE; + + /* set periodic transmit fifo start address and depth */ + usbx->hptxfsiz_bit.ptxfstaddr = USBH_RX_FIFO_SIZE + USBH_NP_TX_FIFO_SIZE; + usbx->hptxfsiz_bit.ptxfsize = USBH_P_TX_FIFO_SIZE; + } +#ifdef OTG2_GLOBAL + if(usbx == OTG2_GLOBAL) + { + /* set receive fifo size */ + usbx->grxfsiz = USBH2_RX_FIFO_SIZE; + + /* set non-periodic transmit fifo start address and depth */ + usbx->gnptxfsiz_ept0tx_bit.nptxfstaddr = USBH2_RX_FIFO_SIZE; + usbx->gnptxfsiz_ept0tx_bit.nptxfdep = USBH2_NP_TX_FIFO_SIZE; + + /* set periodic transmit fifo start address and depth */ + usbx->hptxfsiz_bit.ptxfstaddr = USBH2_RX_FIFO_SIZE + USBH2_NP_TX_FIFO_SIZE; + usbx->hptxfsiz_bit.ptxfsize = USBH2_P_TX_FIFO_SIZE; + } +#endif + /* flush tx fifo */ + usb_flush_tx_fifo(usbx, 16); + + /* flush rx fifo */ + usb_flush_rx_fifo(usbx); + + /* clear host channel interrut mask and status */ + for(i_index = 0; i_index < USB_HOST_CHANNEL_NUM; i_index ++) + { + USB_CHL(usbx, i_index)->hcintmsk = 0; + USB_CHL(usbx, i_index)->hcint = 0xFFFFFFFF; + } + + /* power on to this port */ + usb_port_power_on(usbx, TRUE); + + /* clear global interrupt mask and status */ + usbx->gintmsk = 0; + usbx->gintsts = 0xBFFFFFFF; + + /* set global interrut mask */ + usbx->gintmsk = USB_OTG_SOF_INT | USB_OTG_RXFLVL_INT | + USB_OTG_USBSUSP_INT | USB_OTG_PRT_INT | + USB_OTG_HCH_INT | USB_OTG_INCOMISOIN_INT | + USB_OTG_INCOMPIP_INCOMPISOOUT_INT | USB_OTG_WKUP_INT | + USB_OTG_DISCON_INT; + + /* enable usb global interrupt */ + usb_interrupt_enable(usbx); + + /* active vbus */ + usbh_active_vbus(uhost, TRUE); + return status; +} + +/** + * @brief usb host open channel + * @param uhost: to the structure of usbh_core_type + * @param chn: host channel number + * @param ept_num: devvice endpoint number + * @param dev_address: device address + * @param type: channel transfer type + * this parameter can be one of the following values: + * - EPT_CONTROL_TYPE + * - EPT_BULK_TYPE + * - EPT_INT_TYPE + * - EPT_ISO_TYPE + * @param maxpacket: support max packe size for this channel + * @param speed: device speed + * this parameter can be one of the following values: + * - USB_PRTSPD_FULL_SPEED + * - USB_PRTSPD_LOW_SPEED + * @param ept_addr: endpoint address + * @retval usb_sts_type + */ +void usbh_hc_open(usbh_core_type *uhost, + uint8_t chn, + uint8_t ept_num, + uint8_t dev_address, + uint8_t type, + uint16_t maxpacket, + uint8_t speed) +{ + /* device address */ + uhost->hch[chn].address = dev_address; + + /* device speed */ + uhost->hch[chn].speed = speed; + + /* endpoint transfer type */ + uhost->hch[chn].ept_type = type; + + /* endpoint support maxpacket */ + uhost->hch[chn].maxpacket = maxpacket; + + /* endpoint direction in or out */ + uhost->hch[chn].dir = (ept_num & 0x80)?1:0;; + + /* host channel number */ + uhost->hch[chn].ch_num = chn; + + /* device endpoint number */ + uhost->hch[chn].ept_num = ept_num; + + /* enable channel */ + usb_hc_enable(uhost->usb_reg, chn, + ept_num, dev_address, + type, maxpacket, speed + ); +} + +/** + * @brief disable host channel + * @param usbx: to select the otgfs peripheral. + * this parameter can be one of the following values: + * - OTG1_GLOBAL + * - OTG2_GLOBAL + * @param chn: channel number + * @retval none + */ +void usbh_ch_disable(usbh_core_type *uhost, uint8_t chn) +{ + usb_hch_halt(uhost->usb_reg, chn); +} + +/** + * @brief usb host alloc channel + * @param uhost: to the structure of usbh_core_type + * @param ept_addr: endpoint address + * @retval usb_sts_type + */ +uint16_t usbh_alloc_channel(usbh_core_type *uhost, uint8_t ept_addr) +{ + /* get one free channel */ + uint16_t ch_num = usbh_get_free_channel(uhost); + + if(ch_num == HCH_ERROR) + return USB_FAIL; + + /* set channel to used */ + uhost->channel[ch_num] = HCH_USED | ept_addr; + return ch_num; +} + +/** + * @brief usb host get urb status + * @param uhost: to the structure of usbh_core_type + * @param ch_num: channel number + * @retval urb_sts_type: urb status + */ +urb_sts_type usbh_get_urb_status(usbh_core_type *uhost, uint8_t ch_num) +{ + return uhost->urb_state[ch_num]; +} +/** + * @brief usb wait control setup complete + * @param uhost: to the structure of usbh_core_type + * @param next_ctrl_state: next ctrl state when setup complete + * @param next_enum_state: next enum state when setup complete + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_result_check(usbh_core_type *uhost, ctrl_ept0_sts_type next_ctrl_state, uint8_t next_enum_state) +{ + usb_sts_type status; + + /* control transfer loop */ + status = usbh_ctrl_transfer_loop(uhost); + + if(status == USB_OK) + { + uhost->ctrl.state = next_ctrl_state; + uhost->enum_state = next_enum_state; + uhost->req_state = CMD_SEND; + } + else if(status == USB_ERROR) + { + uhost->ctrl.state = CONTROL_IDLE; + uhost->req_state = CMD_SEND; + } + else if(status == USB_NOT_SUPPORT) + { + uhost->ctrl.state = next_ctrl_state; + uhost->enum_state = next_enum_state; + uhost->req_state = CMD_SEND; + } + return status; +} + +/** + * @brief auto alloc address (1...20) + * @param none + * @retval address (1...20) + */ +uint8_t usbh_alloc_address(void) +{ + static uint8_t address = 1; + if(address == 20) + address = 1; + return address ++; +} + + +/** + * @brief usb host enumeration handler + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_enum_handler(usbh_core_type *uhost) +{ + usb_sts_type status = USB_WAIT; + switch(uhost->enum_state) + { + case ENUM_IDLE: + break; + case ENUM_GET_MIN_DESC: + /* get description */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_get_device_descriptor(uhost, 8); + } + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_GET_FULL_DESC) == USB_OK) + { + usbh_parse_dev_desc(uhost, uhost->rx_buffer, 8); + + /* set new control endpoint maxpacket size */ + uhost->ctrl.ept0_size = (uhost->dev).dev_desc.bMaxPacketSize0; + + /* enable channel */ + usbh_hc_open(uhost, uhost->ctrl.hch_in,0x80, + uhost->dev.address, EPT_CONTROL_TYPE, + uhost->ctrl.ept0_size, + uhost->dev.speed); + + /* enable channel */ + usbh_hc_open(uhost, uhost->ctrl.hch_out,0x00, + uhost->dev.address, EPT_CONTROL_TYPE, + uhost->ctrl.ept0_size, + uhost->dev.speed); + } + break; + + case ENUM_GET_FULL_DESC: + /* get description */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_get_device_descriptor(uhost, 18); + } + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_SET_ADDR) == USB_OK) + { + usbh_parse_dev_desc(uhost, uhost->rx_buffer, 18); + USBH_DEBUG("VID: %xh", uhost->dev.dev_desc.idVendor); + USBH_DEBUG("PID: %xh", uhost->dev.dev_desc.idProduct); + } + break; + + case ENUM_SET_ADDR: + /* set device address */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + uhost->dev.address = usbh_alloc_address(); + USBH_DEBUG("Set Address: %d", uhost->dev.address); + usbh_set_address(uhost, uhost->dev.address); + } + if (usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_GET_CFG) == USB_OK) + { + /* enable channel */ + usbh_hc_open(uhost, uhost->ctrl.hch_in,0x80, + uhost->dev.address, EPT_CONTROL_TYPE, + uhost->ctrl.ept0_size, + uhost->dev.speed); + + /* enable channel */ + usbh_hc_open(uhost, uhost->ctrl.hch_out,0x00, + uhost->dev.address, EPT_CONTROL_TYPE, + uhost->ctrl.ept0_size, + uhost->dev.speed); + } + break; + + case ENUM_GET_CFG: + /* get device confiuration */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_get_configure_descriptor(uhost, 9); + } + + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_GET_FULL_CFG) == USB_OK) + { + usbh_parse_configure_desc(uhost, uhost->rx_buffer, 9); + } + break; + + case ENUM_GET_FULL_CFG: + /* get device confiuration */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_get_configure_descriptor(uhost, uhost->dev.cfg_desc.cfg.wTotalLength); + } + + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_GET_MFC_STRING) == USB_OK) + { + usbh_parse_configure_desc(uhost, uhost->rx_buffer, uhost->dev.cfg_desc.cfg.wTotalLength); + } + break; + + case ENUM_GET_MFC_STRING: + /* get device mfc string */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_get_sting_descriptor(uhost, uhost->dev.dev_desc.iManufacturer, + uhost->rx_buffer, 0xFF); + } + + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_GET_PRODUCT_STRING) == USB_OK) + { + usbh_parse_string_desc(uhost->rx_buffer, uhost->rx_buffer, 0xFF); + uhost->user_handler->user_mfc_string(uhost->rx_buffer); + } + break; + + case ENUM_GET_PRODUCT_STRING: + /* get device product string */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_get_sting_descriptor(uhost, uhost->dev.dev_desc.iProduct, + uhost->rx_buffer, 0xFF); + } + + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_GET_SERIALNUM_STRING) == USB_OK) + { + usbh_parse_string_desc(uhost->rx_buffer, uhost->rx_buffer, 0xFF); + uhost->user_handler->user_product_string(uhost->rx_buffer); + } + break; + + case ENUM_GET_SERIALNUM_STRING: + /* get device serial string */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_get_sting_descriptor(uhost, uhost->dev.dev_desc.iSerialNumber, + uhost->rx_buffer, 0xFF); + } + + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_SET_CONFIG) == USB_OK) + { + usbh_parse_string_desc(uhost->rx_buffer, uhost->rx_buffer, 0xFF); + uhost->user_handler->user_serial_string(uhost->rx_buffer); + } + break; + + case ENUM_SET_CONFIG: + /* set device config */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_set_configuration(uhost, uhost->dev.cfg_desc.cfg.bConfigurationValue); + } + usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_COMPLETE); + + break; + + case ENUM_COMPLETE: + /* enum complete */ + status = USB_OK; + break; + default: + break; + } + return status; +} + +/** + * @brief active vbus. + * @param uhost: to the structure of usbh_core_type + * @param state: vbus state + * @retval none + */ +void usbh_active_vbus(usbh_core_type *uhost, confirm_state state) +{ + uhost->user_handler->user_active_vbus(uhost, state); +} + +/** + * @brief reset usb port + * @param usbx: to the structure of otg_global_type + * @retval none + */ +void usbh_reset_port(usbh_core_type *uhost) +{ + otg_host_type *usb_host = OTG_HOST(uhost->usb_reg); + uint32_t hprt_val = usb_host->hprt; + + hprt_val &= ~(USB_OTG_HPRT_PRTENA | USB_OTG_HPRT_PRTENCHNG | + USB_OTG_HPRT_PRTOVRCACT | USB_OTG_HPRT_PRTCONDET); + + /* set port reset */ + usb_host->hprt = hprt_val | USB_OTG_HPRT_PRTRST; + + usb_delay_ms(100); + + /* clear port reset */ + usb_host->hprt = hprt_val & (~USB_OTG_HPRT_PRTRST); + + usb_delay_ms(20); + +} + +/** + * @brief usb host attached + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +static void usbh_attached(usbh_core_type *uhost) +{ + /* get free channel */ + uhost->ctrl.hch_in = usbh_alloc_channel(uhost, 0x80); + uhost->ctrl.hch_out = usbh_alloc_channel(uhost, 0x00); + + /* user reset callback handler */ + uhost->user_handler->user_reset(); + + /* get device speed */ + uhost->dev.speed = OTG_HOST(uhost->usb_reg)->hprt_bit.prtspd; + uhost->global_state = USBH_ENUMERATION; + uhost->user_handler->user_speed(uhost->dev.speed); + + /* enable channel */ + usbh_hc_open(uhost, uhost->ctrl.hch_in,0x80, + uhost->dev.address, EPT_CONTROL_TYPE, + uhost->ctrl.ept0_size, + uhost->dev.speed); + + /* enable channel */ + usbh_hc_open(uhost, uhost->ctrl.hch_out,0x00, + uhost->dev.address, EPT_CONTROL_TYPE, + uhost->ctrl.ept0_size, + uhost->dev.speed); + + usb_flush_tx_fifo(uhost->usb_reg, 0x10); + usb_flush_rx_fifo(uhost->usb_reg); + + /* user attached callback */ + uhost->user_handler->user_attached(); +} + + +/** + * @brief usb host enumeration + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +static void usbh_enumeration(usbh_core_type *uhost) +{ + /* enumeration process */ + if(usbh_enum_handler(uhost) == USB_OK) + { + /* user enumeration done callback */ + uhost->user_handler->user_enumeration_done(); + uhost->global_state = USBH_USER_HANDLER; + } +} + +/** + * @brief usb host class request + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +static void usbh_class_request(usbh_core_type *uhost) +{ + usb_sts_type status; + + /* class request callback */ + status = uhost->class_handler->request_handler((void *)uhost); + if(status == USB_OK) + { + uhost->global_state = USBH_CLASS; + } + else if(status == USB_ERROR || status == USB_FAIL) + { + uhost->global_state = USBH_ERROR_STATE; + } + else if(status == USB_NOT_SUPPORT) + { + uhost->global_state = USBH_ERROR_STATE; + } +} + +/** + * @brief usb host class handler + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +static void usbh_class(usbh_core_type *uhost) +{ + /* process handler */ + if(uhost->class_handler->process_handler((void *)uhost) == USB_OK) + { + } +} + +/** + * @brief usb host suspend + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +static void usbh_suspend(usbh_core_type *uhost) +{ + /* set device feature */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + usbh_set_feature(uhost, 0x01, 0); + } + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_IDLE) == USB_OK) + { + /* enter suspend mode */ + usb_delay_ms(3); + usbh_enter_suspend(uhost); + uhost->global_state = USBH_SUSPENDED; + + } +} + +/** + * @brief usb host wakeup + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +static void usbh_wakeup(usbh_core_type *uhost) +{ + /* clear device feature */ + if(uhost->ctrl.state == CONTROL_IDLE) + { + /* usb host resume */ + usbh_resume(uhost); + usbh_clear_dev_feature(uhost, 0x01, 0); + } + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_IDLE) == USB_OK) + { + uhost->global_state = USBH_CLASS_REQUEST; + USBH_DEBUG("Remote Wakeup"); + } +} + +/** + * @brief usb host disconnect + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +static void usbh_disconnect(usbh_core_type *uhost) +{ + uint8_t i_index = 0; + + /* set host to default state */ + usbh_cfg_default_init(uhost); + + /* free host channel */ + for(i_index = 0; i_index < USB_HOST_CHANNEL_NUM; i_index ++) + { + usbh_free_channel(uhost, i_index); + } + + /* call class reset handler */ + if(uhost->class_handler->reset_handler != NULL) + { + uhost->class_handler->reset_handler(uhost); + } + + /* set global state to idle */ + uhost->global_state = USBH_IDLE; + + /*call user disconnect function */ + uhost->user_handler->user_disconnect(); +} + + +/** + * @brief usb host enum loop handler + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +usb_sts_type usbh_loop_handler(usbh_core_type *uhost) +{ + usb_sts_type status = USB_FAIL; + + if(uhost->conn_sts == 0 && + uhost->global_state != USBH_IDLE && + uhost->global_state != USBH_DISCONNECT) + { + uhost->global_state = USBH_IDLE; + } + switch(uhost->global_state) + { + case USBH_IDLE: + if(uhost->conn_sts == 1) + { + uhost->global_state = USBH_PORT_EN; + + /* wait stable */ + usb_delay_ms(200); + + /* port reset */ + usbh_reset_port(uhost); + + /* user reset */ + uhost->user_handler->user_reset(); + } + break; + + case USBH_PORT_EN: + if(uhost->port_enable) + { + uhost->global_state = USBH_ATTACHED; + usb_delay_ms(50); + } + break; + + case USBH_ATTACHED: + usbh_attached(uhost); + break; + + case USBH_ENUMERATION: + usbh_enumeration(uhost); + break; + + case USBH_USER_HANDLER: + uhost->global_state = USBH_CLASS_REQUEST; + if( uhost->class_handler->init_handler(uhost) == USB_NOT_SUPPORT) + { + uhost->global_state = USBH_UNSUPPORT; + } + break; + + case USBH_CLASS_REQUEST: + usbh_class_request(uhost); + break; + + case USBH_CLASS: + usbh_class(uhost); + break; + + case USBH_SUSPEND: + usbh_suspend(uhost); + break; + + case USBH_SUSPENDED: + break; + + case USBH_WAKEUP: + usbh_wakeup(uhost); + break; + + case USBH_DISCONNECT: + usbh_disconnect(uhost); + break; + + case USBH_ERROR_STATE: + usbh_cfg_default_init(uhost); + uhost->class_handler->reset_handler(uhost); + uhost->user_handler->user_reset(); + break; + case USBH_UNSUPPORT: + break; + default: + break; + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_usb/usb_drivers/src/usbh_ctrl.c b/armlib/at32_usb/usb_drivers/src/usbh_ctrl.c new file mode 100644 index 000000000..98f92b48e --- /dev/null +++ b/armlib/at32_usb/usb_drivers/src/usbh_ctrl.c @@ -0,0 +1,966 @@ +/** + ************************************************************************** + * @file usbh_ctrl.c + * @brief usb host control request + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ +#include "usbh_ctrl.h" +#include "usbh_core.h" +#include "usb_std.h" + +/** @addtogroup AT32F435_437_middlewares_usbh_drivers + * @{ + */ + +/** @defgroup USBH_drivers_control + * @brief usb host drivers control + * @{ + */ + +/** @defgroup USBH_ctrl_private_functions + * @{ + */ + +/* control timeout 5s */ +#define CTRL_TIMEOUT 5000 + +/** + * @brief usb host control send setup packet + * @param uhost: to the structure of usbh_core_type + * @param buffer: usb control setup send buffer + * @param hc_num: channel number + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_send_setup(usbh_core_type *uhost, uint8_t *buffer, uint8_t hc_num) +{ + uhost->hch[hc_num].dir = 0; + uhost->hch[hc_num].data_pid = HCH_PID_SETUP; + uhost->hch[hc_num].trans_buf = buffer; + uhost->hch[hc_num].trans_len = 8; /*setup */ + + return usbh_in_out_request(uhost, hc_num); +} + +/** + * @brief usb host control receive data from device + * @param uhost: to the structure of usbh_core_type + * @param buffer: usb control receive data buffer + * @param length: usb control receive data length + * @param hc_num: channel number + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_recv_data(usbh_core_type *uhost, uint8_t *buffer, + uint16_t length, uint16_t hc_num) +{ + uhost->hch[hc_num].dir = 1; + uhost->hch[hc_num].data_pid = HCH_PID_DATA1; + uhost->hch[hc_num].trans_buf = buffer; + uhost->hch[hc_num].trans_len = length; + + return usbh_in_out_request(uhost, hc_num); +} + +/** + * @brief usb host control send data packet + * @param uhost: to the structure of usbh_core_type + * @param buffer: usb control send data buffer + * @param length: usb control send data length + * @param hc_num: channel number + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_send_data(usbh_core_type *uhost, uint8_t *buffer, + uint16_t length, uint16_t hc_num) +{ + uhost->hch[hc_num].dir = 0; + uhost->hch[hc_num].trans_buf = buffer; + uhost->hch[hc_num].trans_len = length; + + if(length == 0) + { + uhost->hch[uhost->ctrl.hch_out].toggle_out = 1; + } + if(uhost->hch[uhost->ctrl.hch_out].toggle_out == 0) + { + uhost->hch[hc_num].data_pid = HCH_PID_DATA0; + } + else + { + uhost->hch[hc_num].data_pid = HCH_PID_DATA1; + } + return usbh_in_out_request(uhost, hc_num); +} + +/** + * @brief usb host control setup request handler + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_setup_handler(usbh_core_type *uhost) +{ + usbh_ctrl_send_setup(uhost, (uint8_t *)(&uhost->ctrl.setup), + uhost->ctrl.hch_out); + uhost->ctrl.state = CONTROL_SETUP_WAIT; + return USB_OK; +} + +/** + * @brief usb host control setup request wait handler + * @param uhost: to the structure of usbh_core_type + * @param timeout: pointer of wait timeout + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_setup_wait_handler(usbh_core_type *uhost, uint32_t *timeout) +{ + urb_sts_type urb_state; + usb_sts_type status = USB_WAIT; + uint8_t dir; + urb_state = uhost->urb_state[uhost->ctrl.hch_out]; + if(urb_state == URB_DONE) + { + dir = uhost->ctrl.setup.bmRequestType & USB_REQUEST_DIR_MASK; + if(uhost->ctrl.setup.wLength != 0) + { + *timeout = DATA_STAGE_TIMEOUT; + if(dir == USB_DIR_D2H) //in + { + uhost->ctrl.state = CONTROL_DATA_IN; + } + else //out + { + uhost->ctrl.state = CONTROL_DATA_OUT; + } + } + else + { + *timeout = NODATA_STAGE_TIMEOUT; + if(dir == USB_DIR_D2H) //no data, send status + { + uhost->ctrl.state = CONTROL_STATUS_OUT; + } + else //out + { + uhost->ctrl.state = CONTROL_STATUS_IN; + } + } + uhost->ctrl.timer = uhost->timer; + status = USB_OK; + } + else if(urb_state == URB_ERROR || urb_state == URB_NOTREADY) + { + uhost->ctrl.state = CONTROL_ERROR; + uhost->ctrl.sts = CTRL_XACTERR; + status = USB_ERROR; + } + else + { + /* wait nak timeout 5s*/ + if(uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT) + { + uhost->ctrl.state = CONTROL_ERROR; + uhost->ctrl.sts = CTRL_XACTERR; + status = USB_ERROR; + } + } + return status; +} + +/** + * @brief usb host control data in request handler + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_data_in_handler(usbh_core_type *uhost) +{ + usb_sts_type status = USB_OK; + usbh_ctrl_recv_data(uhost, uhost->ctrl.buffer, + uhost->ctrl.len, + uhost->ctrl.hch_in); + uhost->ctrl.state = CONTROL_DATA_IN_WAIT; + + return status; +} + +/** + * @brief usb host control data in wait handler + * @param uhost: to the structure of usbh_core_type + * @param timeout: wait timeout + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_data_in_wait_handler(usbh_core_type *uhost, uint32_t timeout) +{ + usb_sts_type status = USB_OK; + urb_sts_type urb_state; + urb_state = uhost->urb_state[uhost->ctrl.hch_in]; + + if(urb_state == URB_DONE) + { + uhost->ctrl.state = CONTROL_STATUS_OUT; + } + else if(urb_state == URB_STALL) + { + uhost->ctrl.state = CONTROL_STALL; + } + else if(urb_state == URB_ERROR) + { + uhost->ctrl.state = CONTROL_ERROR; + } + else + { + /* wait nak timeout 5s*/ + if(uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT) + { + uhost->ctrl.state = CONTROL_ERROR; + uhost->ctrl.sts = CTRL_XACTERR; + status = USB_ERROR; + } + + } + return status; +} + +/** + * @brief usb host control data out request handler + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_data_out_handler(usbh_core_type *uhost) +{ + usb_sts_type status = USB_OK; + uhost->hch[uhost->ctrl.hch_out].toggle_out = 1; + + usbh_ctrl_send_data(uhost, uhost->ctrl.buffer, + uhost->ctrl.len, + uhost->ctrl.hch_out); + uhost->ctrl.state = CONTROL_DATA_OUT_WAIT; + + return status; +} + +/** + * @brief usb host control data out wait handler + * @param uhost: to the structure of usbh_core_type + * @param timeout: wait timeout + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_data_out_wait_handler(usbh_core_type *uhost, uint32_t timeout) +{ + usb_sts_type status = USB_OK; + urb_sts_type urb_state; + urb_state = uhost->urb_state[uhost->ctrl.hch_out]; + if(urb_state == URB_DONE) + { + uhost->ctrl.state = CONTROL_STATUS_IN; + } + else if(urb_state == URB_STALL) + { + uhost->ctrl.state = CONTROL_STALL; + } + else if(urb_state == URB_ERROR) + { + uhost->ctrl.state = CONTROL_ERROR; + } + else if(urb_state == URB_NOTREADY) + { + uhost->ctrl.state = CONTROL_DATA_OUT; + } + + /* wait nak timeout 5s*/ + if((uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT) && (urb_state == URB_NOTREADY)) + { + uhost->ctrl.state = CONTROL_ERROR; + uhost->ctrl.sts = CTRL_XACTERR; + status = USB_ERROR; + } + return status; +} + +/** + * @brief usb host control status data in handler + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_status_in_handler(usbh_core_type *uhost) +{ + usb_sts_type status = USB_OK; + usbh_ctrl_recv_data(uhost, 0, 0, + uhost->ctrl.hch_in); + uhost->ctrl.state = CONTROL_STATUS_IN_WAIT; + + + return status; +} + +/** + * @brief usb host control status data in wait handler + * @param uhost: to the structure of usbh_core_type + * @param timeout: wait timeout + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_status_in_wait_handler(usbh_core_type *uhost, uint32_t timeout) +{ + usb_sts_type status = USB_OK; + urb_sts_type urb_state; + urb_state = uhost->urb_state[uhost->ctrl.hch_in]; + if(urb_state == URB_DONE) + { + uhost->ctrl.state = CONTROL_COMPLETE; + } + else if(urb_state == URB_STALL) + { + uhost->ctrl.state = CONTROL_STALL; + status = USB_NOT_SUPPORT; + } + else if(urb_state == URB_ERROR) + { + uhost->ctrl.state = CONTROL_ERROR; + } + else + { + /* wait nak timeout 5s*/ + if(uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT) + { + uhost->ctrl.state = CONTROL_ERROR; + uhost->ctrl.sts = CTRL_XACTERR; + status = USB_ERROR; + } + } + return status; +} + +/** + * @brief usb host control status data out wait handler + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_status_out_handler(usbh_core_type *uhost) +{ + usb_sts_type status = USB_OK; + uhost->hch[uhost->ctrl.hch_out].toggle_out ^= 1; + + usbh_ctrl_send_data(uhost, 0, 0, uhost->ctrl.hch_out); + uhost->ctrl.state = CONTROL_STATUS_OUT_WAIT; + + return status; +} + +/** + * @brief usb host control status data out wait handler + * @param uhost: to the structure of usbh_core_type + * @param timeout: wait timeout + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_status_out_wait_handler(usbh_core_type *uhost, uint32_t timeout) +{ + usb_sts_type status = USB_OK; + urb_sts_type urb_state; + urb_state = uhost->urb_state[uhost->ctrl.hch_out]; + if(urb_state == URB_DONE) + { + uhost->ctrl.state = CONTROL_COMPLETE; + } + else if(urb_state == URB_STALL) + { + uhost->ctrl.state = CONTROL_STALL; + } + else if(urb_state == URB_ERROR) + { + uhost->ctrl.state = CONTROL_ERROR; + } + else if(urb_state == URB_NOTREADY) + { + uhost->ctrl.state = CONTROL_STATUS_OUT; + } + /* wait nak timeout 5s*/ + if((uhost->timer - uhost->ctrl.timer > CTRL_TIMEOUT) && (urb_state == URB_NOTREADY)) + { + uhost->ctrl.state = CONTROL_ERROR; + uhost->ctrl.sts = CTRL_XACTERR; + status = USB_ERROR; + } + return status; +} + +/** + * @brief usb host control error handler + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_error_handler(usbh_core_type *uhost) +{ + usb_sts_type status = USB_WAIT; + if(++ uhost->ctrl.err_cnt <= USBH_MAX_ERROR_COUNT) + { + uhost->ctrl.state = CONTROL_SETUP; + } + else + { + uhost->ctrl.sts = CTRL_FAIL; + uhost->global_state = USBH_ERROR_STATE; + uhost->ctrl.err_cnt = 0; + USBH_DEBUG("control error: **** Device No Response ****"); + status = USB_ERROR; + } + return status; +} + +/** + * @brief usb host control stall handler + * @param uhost: to the structure of usbh_core_type + * @retval usb_sts_type + */ +usb_sts_type usbh_ctrl_stall_handler(usbh_core_type *uhost) +{ + return USB_NOT_SUPPORT; +} + +/** + * @brief usb host control complete handler + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_complete_handler(usbh_core_type *uhost) +{ + return USB_OK; +} + +/** + * @brief usb host control transfer loop function + * @param uhost: to the structure of usbh_core_type + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_transfer_loop(usbh_core_type *uhost) +{ + usb_sts_type status = USB_WAIT; + static uint32_t timeout = 0; + uhost->ctrl.sts = CTRL_START; + + switch(uhost->ctrl.state) + { + case CONTROL_SETUP: + usbh_ctrl_setup_handler(uhost); + uhost->ctrl.timer = uhost->timer; + break; + + case CONTROL_SETUP_WAIT: + usbh_ctrl_setup_wait_handler(uhost, &timeout); + break; + + case CONTROL_DATA_IN: + usbh_ctrl_data_in_handler(uhost); + break; + + case CONTROL_DATA_IN_WAIT: + usbh_ctrl_data_in_wait_handler(uhost, timeout); + break; + + case CONTROL_DATA_OUT: + usbh_ctrl_data_out_handler(uhost); + break; + + case CONTROL_DATA_OUT_WAIT: + usbh_ctrl_data_out_wait_handler(uhost, timeout); + break; + + case CONTROL_STATUS_IN: + usbh_ctrl_status_in_handler(uhost); + break; + + case CONTROL_STATUS_IN_WAIT: + usbh_ctrl_status_in_wait_handler(uhost, timeout); + break; + + case CONTROL_STATUS_OUT: + usbh_ctrl_status_out_handler(uhost); + break; + + case CONTROL_STATUS_OUT_WAIT: + usbh_ctrl_status_out_wait_handler(uhost, timeout); + break; + case CONTROL_STALL: + status = usbh_ctrl_stall_handler(uhost); + break; + case CONTROL_ERROR: + status = usbh_ctrl_error_handler(uhost); + break; + case CONTROL_COMPLETE: + status = usbh_ctrl_complete_handler(uhost); + break; + + default: + break; + } + + return status; +} + +/** + * @brief usb host control request + * @param uhost: to the structure of usbh_core_type + * @param buffer: usb request buffer + * @param length: usb request length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_ctrl_request(usbh_core_type *uhost, uint8_t *buffer, uint16_t length) +{ + usb_sts_type status = USB_OK; + if(uhost->req_state == CMD_SEND) + { + uhost->req_state = CMD_WAIT; + uhost->ctrl.buffer = buffer; + uhost->ctrl.len = length; + uhost->ctrl.state = CONTROL_SETUP; + } + return status; +} + +/** + * @brief usb host get device descriptor + * @param uhost: to the structure of usbh_core_type + * @param length: get descriptor request length + * @param req_type: usb request type + * @param wvalue: usb wvalue + * @param buffer: request buffer + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_get_descriptor(usbh_core_type *uhost, uint16_t length, + uint8_t req_type, uint16_t wvalue, + uint8_t *buffer) +{ + usb_sts_type status; + uhost->ctrl.setup.bmRequestType = USB_DIR_D2H | req_type; + uhost->ctrl.setup.bRequest = USB_STD_REQ_GET_DESCRIPTOR; + uhost->ctrl.setup.wValue = wvalue; + uhost->ctrl.setup.wLength = length; + + if((wvalue & 0xFF00) == ((USB_DESCIPTOR_TYPE_STRING << 8) & 0xFF00)) + { + uhost->ctrl.setup.wIndex = 0x0409; + } + else + { + uhost->ctrl.setup.wIndex = 0; + } + + status = usbh_ctrl_request(uhost, buffer, length); + return status; +} + +/** + * @brief usb host parse device descriptor + * @param uhost: to the structure of usbh_core_type + * @param buffer: usb device descriptor buffer + * @param length: usb device descriptor length + * @retval status: usb_sts_type status + */ +void usbh_parse_dev_desc(usbh_core_type *uhost, uint8_t *buffer, uint16_t length) +{ + usbh_dev_desc_type *desc = &(uhost->dev); + + desc->dev_desc.bLength = *(uint8_t *)(buffer + 0); + desc->dev_desc.bDescriptorType = *(uint8_t *)(buffer + 1); + desc->dev_desc.bcdUSB = SWAPBYTE(buffer + 2); + desc->dev_desc.bDeviceClass = *(uint8_t *)(buffer + 4); + desc->dev_desc.bDeviceSubClass = *(uint8_t *)(buffer + 5); + desc->dev_desc.bDeviceProtocol = *(uint8_t *)(buffer + 6); + desc->dev_desc.bMaxPacketSize0 = *(uint8_t *)(buffer + 7); + + if(length > 8) + { + desc->dev_desc.idVendor = SWAPBYTE(buffer + 8); + desc->dev_desc.idProduct = SWAPBYTE(buffer + 10); + desc->dev_desc.bcdDevice = SWAPBYTE(buffer + 12); + desc->dev_desc.iManufacturer = *(uint8_t *)(buffer + 14); + desc->dev_desc.iProduct = *(uint8_t *)(buffer + 15); + desc->dev_desc.iSerialNumber = *(uint8_t *)(buffer + 16); + desc->dev_desc.bNumConfigurations = *(uint8_t *)(buffer + 17); + } +} + +/** + * @brief usb host get next header + * @param buffer: usb data buffer + * @param index_len: pointer of index len + * @retval status: usb_sts_type status + */ +usb_header_desc_type *usbh_get_next_header(uint8_t *buf, uint16_t *index_len) +{ + *index_len += ((usb_header_desc_type *)buf)->bLength; + return (usb_header_desc_type *) + ((uint8_t *)buf + ((usb_header_desc_type *)buf)->bLength); +} + +/** + * @brief usb host parse interface descriptor + * @param intf: usb interface description type + * @param buf: interface description data buffer + * @retval none + */ +void usbh_parse_interface_desc(usb_interface_desc_type *intf, uint8_t *buf) +{ + intf->bLength = *(uint8_t *)buf; + intf->bDescriptorType = *(uint8_t *)(buf + 1); + intf->bInterfaceNumber = *(uint8_t *)(buf + 2); + intf->bAlternateSetting = *(uint8_t *)(buf + 3); + intf->bNumEndpoints = *(uint8_t *)(buf + 4); + intf->bInterfaceClass = *(uint8_t *)(buf + 5); + intf->bInterfaceSubClass = *(uint8_t *)(buf + 6); + intf->bInterfaceProtocol = *(uint8_t *)(buf + 7); + intf->iInterface = *(uint8_t *)(buf + 8); +} + +/** + * @brief usb host parse endpoint descriptor + * @param ept_desc: endpoint type + * @param buf: endpoint description data buffer + * @retval none + */ +void usbh_parse_endpoint_desc(usb_endpoint_desc_type *ept_desc, uint8_t *buf) +{ + ept_desc->bLength = *(uint8_t *)(buf + 0); + ept_desc->bDescriptorType = *(uint8_t *)(buf + 1); + ept_desc->bEndpointAddress = *(uint8_t *)(buf + 2); + ept_desc->bmAttributes = *(uint8_t *)(buf + 3); + ept_desc->wMaxPacketSize = SWAPBYTE(buf + 4); + ept_desc->bInterval = *(uint8_t *)(buf + 6); +} + +/** + * @brief usb host parse configure descriptor + * @param uhost: to the structure of usbh_core_type + * @param buffer: configure buffer + * @param length: configure length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_parse_configure_desc(usbh_core_type *uhost, + uint8_t *buffer, uint16_t length) +{ + usb_cfg_desc_type *cfg_desc = &(uhost->dev.cfg_desc); + usb_interface_desc_type *intf_desc; + usb_endpoint_desc_type *ept_desc; + usb_header_desc_type *desc; + uint16_t index_len; + uint8_t index_intf = 0; + uint8_t index_ept = 0; + + desc = (usb_header_desc_type *)buffer; + cfg_desc->cfg.bLength = *(uint8_t *)buffer; + cfg_desc->cfg.bDescriptorType = *(uint8_t *)(buffer + 1); + cfg_desc->cfg.wTotalLength = SWAPBYTE(buffer + 2); + cfg_desc->cfg.bNumInterfaces = *(uint8_t *)(buffer + 4); + cfg_desc->cfg.bConfigurationValue = *(uint8_t *)(buffer + 5); + cfg_desc->cfg.iConfiguration = *(uint8_t *)(buffer + 6); + cfg_desc->cfg.bmAttributes = *(uint8_t *)(buffer + 7); + cfg_desc->cfg.bMaxPower = *(uint8_t *)(buffer + 8); + + if(length > USB_DEVICE_CFG_DESC_LEN) + { + index_len = USB_DEVICE_CFG_DESC_LEN; + + while((index_intf < USBH_MAX_INTERFACE) && index_len < cfg_desc->cfg.wTotalLength) + { + desc = usbh_get_next_header((uint8_t *)desc, &index_len); + if(desc->bDescriptorType == USB_DESCIPTOR_TYPE_INTERFACE) + { + index_ept = 0; + intf_desc = &cfg_desc->interface[index_intf].interface; + usbh_parse_interface_desc(intf_desc, (uint8_t *)desc); + + while(index_ept < intf_desc->bNumEndpoints && index_len < cfg_desc->cfg.wTotalLength) + { + desc = usbh_get_next_header((uint8_t *)desc, &index_len); + if(desc->bDescriptorType == USB_DESCIPTOR_TYPE_ENDPOINT) + { + ept_desc = &(cfg_desc->interface[index_intf].endpoint[index_ept]); + usbh_parse_endpoint_desc(ept_desc, (uint8_t *)desc); + index_ept ++; + } + } + index_intf ++; + } + } + } + return USB_OK; +} + +/** + * @brief usb host find interface + * @param uhost: to the structure of usbh_core_type + * @param class_code: class code + * @param sub_class: subclass code + * @param protocol: prtocol code + * @retval idx: interface index + */ +uint8_t usbh_find_interface(usbh_core_type *uhost, uint8_t class_code, uint8_t sub_class, uint8_t protocol) +{ + uint8_t idx = 0; + usb_itf_desc_type *usbitf; + for(idx = 0; idx < uhost->dev.cfg_desc.cfg.bNumInterfaces; idx ++) + { + usbitf = &uhost->dev.cfg_desc.interface[idx]; + if(((usbitf->interface.bInterfaceClass == class_code) || (class_code == 0xFF)) && + ((usbitf->interface.bInterfaceSubClass == sub_class) || (sub_class == 0xFF)) && + ((usbitf->interface.bInterfaceProtocol == protocol) || (protocol == 0xFF)) + ) + { + return idx; + } + } + return 0xFF; +} + +/** + * @brief usbh parse string descriptor + * @param src: string source pointer + * @param dest: string destination pointer + * @param length: string length + * @retval none + */ +void usbh_parse_string_desc(uint8_t *src, uint8_t *dest, uint16_t length) +{ + uint16_t len; + uint16_t i_index; + + if(src[1] == USB_DESCIPTOR_TYPE_STRING) + { + len = ((src[0] - 2) <= length ? (src[0] - 2) : length); + src += 2; + for(i_index = 0; i_index < len; i_index += 2) + { + *dest = src[i_index]; + dest ++; + } + *dest = 0; + } +} + +/** + * @brief usb host get device descriptor + * @param uhost: to the structure of usbh_core_type + * @param length: get device descriptor length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_get_device_descriptor(usbh_core_type *uhost, uint16_t length) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + uint16_t wvalue; + + bm_req = USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD; + wvalue = (USB_DESCIPTOR_TYPE_DEVICE << 8) & 0xFF00; + + status = usbh_get_descriptor(uhost, length, bm_req, + wvalue, uhost->rx_buffer); + return status; +} + +/** + * @brief usb host get configure descriptor + * @param uhost: to the structure of usbh_core_type + * @param length: get device configure length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_get_configure_descriptor(usbh_core_type *uhost, uint16_t length) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + uint16_t wvalue; + + bm_req = USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD; + wvalue = (USB_DESCIPTOR_TYPE_CONFIGURATION << 8) & 0xFF00; + + status = usbh_get_descriptor(uhost, length, bm_req, + wvalue, uhost->rx_buffer); + + return status; +} + +/** + * @brief usb host get string descriptor + * @param uhost: to the structure of usbh_core_type + * @param string_id: string id + * @param buffer: receive data buffer + * @param length: get device string length + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_get_sting_descriptor(usbh_core_type *uhost, uint8_t string_id, + uint8_t *buffer, uint16_t length) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + uint16_t wvalue; + + bm_req = USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD; + wvalue = (USB_DESCIPTOR_TYPE_STRING << 8) | string_id; + + status = usbh_get_descriptor(uhost, length, bm_req, + wvalue, uhost->rx_buffer); + + return status; +} + +/** + * @brief usb host set configurtion + * @param uhost: to the structure of usbh_core_type + * @param config: usb configuration + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_set_configuration(usbh_core_type *uhost, uint16_t config) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + bm_req = USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD; + + uhost->ctrl.setup.bmRequestType = USB_DIR_H2D | bm_req; + uhost->ctrl.setup.bRequest = USB_STD_REQ_SET_CONFIGURATION; + uhost->ctrl.setup.wValue = config; + uhost->ctrl.setup.wLength = 0; + uhost->ctrl.setup.wIndex = 0; + status = usbh_ctrl_request(uhost, 0, 0); + return status; +} + +/** + * @brief usb host set device address + * @param uhost: to the structure of usbh_core_type + * @param address: device address + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_set_address(usbh_core_type *uhost, uint8_t address) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + bm_req = USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD; + + uhost->ctrl.setup.bmRequestType = USB_DIR_H2D | bm_req; + uhost->ctrl.setup.bRequest = USB_STD_REQ_SET_ADDRESS; + uhost->ctrl.setup.wValue = (uint16_t)address; + uhost->ctrl.setup.wLength = 0; + uhost->ctrl.setup.wIndex = 0; + status = usbh_ctrl_request(uhost, 0, 0); + return status; +} + +/** + * @brief usb host set interface + * @param uhost: to the structure of usbh_core_type + * @param ept_num: endpoint number + * @param altsetting: alter setting + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_set_interface(usbh_core_type *uhost, uint8_t ept_num, uint8_t altsetting) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + bm_req = USB_REQ_RECIPIENT_INTERFACE | USB_REQ_TYPE_STANDARD; + + uhost->ctrl.setup.bmRequestType = USB_DIR_H2D | bm_req; + uhost->ctrl.setup.bRequest = USB_STD_REQ_SET_INTERFACE; + uhost->ctrl.setup.wValue = (uint16_t)altsetting; + uhost->ctrl.setup.wLength = 0; + uhost->ctrl.setup.wIndex = ept_num; + status = usbh_ctrl_request(uhost, 0, 0); + return status; +} + +/** + * @brief usb host set feature + * @param uhost: to the structure of usbh_core_type + * @param feature: feature number + * @param index: index number + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_set_feature(usbh_core_type *uhost, uint8_t feature, uint16_t index) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + bm_req = USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD; + + uhost->ctrl.setup.bmRequestType = USB_DIR_H2D | bm_req; + uhost->ctrl.setup.bRequest = USB_STD_REQ_SET_FEATURE; + uhost->ctrl.setup.wValue = (uint16_t)feature; + uhost->ctrl.setup.wLength = 0; + uhost->ctrl.setup.wIndex = index; + status = usbh_ctrl_request(uhost, 0, 0); + return status; +} + + +/** + * @brief usb host clear device feature + * @param uhost: to the structure of usbh_core_type + * @param feature: feature number + * @param index: index number + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_clear_dev_feature(usbh_core_type *uhost, uint8_t feature, uint16_t index) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + bm_req = USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD; + + uhost->ctrl.setup.bmRequestType = USB_DIR_H2D | bm_req; + uhost->ctrl.setup.bRequest = USB_STD_REQ_CLEAR_FEATURE; + uhost->ctrl.setup.wValue = (uint16_t)feature; + uhost->ctrl.setup.wLength = 0; + uhost->ctrl.setup.wIndex = index; + status = usbh_ctrl_request(uhost, 0, 0); + return status; +} + +/** + * @brief usb host clear endpoint feature + * @param uhost: to the structure of usbh_core_type + * @param ept_num: endpoint number + * @param hc_num: host channel number + * @retval status: usb_sts_type status + */ +usb_sts_type usbh_clear_ept_feature(usbh_core_type *uhost, uint8_t ept_num, uint8_t hc_num) +{ + usb_sts_type status = USB_WAIT; + uint8_t bm_req; + if(uhost->ctrl.state == CONTROL_IDLE ) + { + bm_req = USB_REQ_RECIPIENT_ENDPOINT | USB_REQ_TYPE_STANDARD; + + uhost->ctrl.setup.bmRequestType = USB_DIR_H2D | bm_req; + uhost->ctrl.setup.bRequest = USB_STD_REQ_CLEAR_FEATURE; + uhost->ctrl.setup.wValue = USB_FEATURE_EPT_HALT; + uhost->ctrl.setup.wLength = 0; + uhost->ctrl.setup.wIndex = ept_num; + usbh_ctrl_request(uhost, 0, 0); + } + if(usbh_ctrl_result_check(uhost, CONTROL_IDLE, ENUM_IDLE) == USB_OK) + { + status = USB_OK; + } + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/armlib/at32_usb/usb_drivers/src/usbh_int.c b/armlib/at32_usb/usb_drivers/src/usbh_int.c new file mode 100644 index 000000000..95750b85c --- /dev/null +++ b/armlib/at32_usb/usb_drivers/src/usbh_int.c @@ -0,0 +1,535 @@ +/** + ************************************************************************** + * @file usbh_int.c + * @brief usb host interrupt request + ************************************************************************** + * Copyright notice & Disclaimer + * + * The software Board Support Package (BSP) that is made available to + * download from Artery official website is the copyrighted work of Artery. + * Artery authorizes customers to use, copy, and distribute the BSP + * software and its related documentation for the purpose of design and + * development in conjunction with Artery microcontrollers. Use of the + * software is governed by this copyright notice and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES, + * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS, + * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR + * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS, + * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. + * + ************************************************************************** + */ +#include "usbh_int.h" + + +/** @addtogroup AT32F435_437_middlewares_usbh_drivers + * @{ + */ + +/** @defgroup USBH_drivers_interrupt + * @brief usb host interrupt + * @{ + */ + +/** @defgroup USBH_int_private_functions + * @{ + */ + +/** + * @brief usb host interrupt handler + * @param otgdev: to the structure of otg_core_type + * @retval none + */ +void usbh_irq_handler(otg_core_type *otgdev) +{ + otg_global_type *usbx = otgdev->usb_reg; + usbh_core_type *uhost = &otgdev->host; + + if(usbx->gintsts_bit.curmode == 1) + { + if(usb_global_get_all_interrupt(usbx) & USB_OTG_RXFLVL_FLAG) + { + usbh_rx_qlvl_handler(uhost); + usb_global_clear_interrupt(usbx, USB_OTG_RXFLVL_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_HCH_FLAG) + { + usbh_hch_handler(uhost); + usb_global_clear_interrupt(usbx, USB_OTG_HCH_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_SOF_FLAG) + { + usbh_sof_handler(uhost); + usb_global_clear_interrupt(usbx, USB_OTG_SOF_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_MODEMIS_FLAG) + { + usb_global_clear_interrupt(usbx, USB_OTG_MODEMIS_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_WKUP_FLAG) + { + usbh_wakeup_handler(uhost); + usb_global_clear_interrupt(usbx, USB_OTG_WKUP_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_DISCON_FLAG) + { + usbh_disconnect_handler(uhost); + usb_global_clear_interrupt(usbx, USB_OTG_DISCON_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_PRT_FLAG) + { + usbh_port_handler(uhost); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_INCOMPIP_INCOMPISOOUT_FLAG) + { + usb_global_clear_interrupt(usbx, USB_OTG_INCOMPIP_INCOMPISOOUT_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_INCOMISOIN_FLAG) + { + usb_global_clear_interrupt(usbx, USB_OTG_INCOMISOIN_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_PTXFEMP_FLAG) + { + usb_global_clear_interrupt(usbx, USB_OTG_PTXFEMP_FLAG); + } + if(usb_global_get_all_interrupt(usbx) & USB_OTG_ISOOUTDROP_FLAG) + { + usb_global_clear_interrupt(usbx, USB_OTG_ISOOUTDROP_FLAG); + } + } +} + +/** + * @brief usb host wakeup handler + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +void usbh_wakeup_handler(usbh_core_type *uhost) +{ + uhost->global_state = USBH_WAKEUP; +} + +/** + * @brief usb host sof handler + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +void usbh_sof_handler(usbh_core_type *uhost) +{ + uhost->timer ++; +} + +/** + * @brief usb host disconnect handler + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +void usbh_disconnect_handler(usbh_core_type *uhost) +{ + otg_global_type *usbx = uhost->usb_reg; + + uint8_t i_index; + + usb_host_disable(usbx); + + uhost->conn_sts = 0; + + uhost->global_state = USBH_DISCONNECT; + + for(i_index = 0; i_index < USB_HOST_CHANNEL_NUM; i_index ++) + { + usbh_free_channel(uhost, i_index); + } + usbh_fsls_clksel(usbx, USB_HCFG_CLK_48M); +} + +/** + * @brief usb host in transfer request handler + * @param uhost: to the structure of usbh_core_type + * @param chn: channel number + * @retval none + */ +void usbh_hch_in_handler(usbh_core_type *uhost, uint8_t chn) +{ + otg_global_type *usbx = uhost->usb_reg; + otg_hchannel_type *usb_chh = USB_CHL(usbx, chn); + uint32_t hcint_value = usb_chh->hcint; + hcint_value &= usb_chh->hcintmsk; + + if( hcint_value & USB_OTG_HC_ACK_FLAG) + { + usb_chh->hcint = USB_OTG_HC_ACK_FLAG; + } + else if(hcint_value & USB_OTG_HC_STALL_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_chh->hcint = USB_OTG_HC_NAK_FLAG | USB_OTG_HC_STALL_FLAG; + uhost->hch[chn].state = HCH_STALL; + usb_hch_halt(usbx, chn); + } + else if(hcint_value & USB_OTG_HC_DTGLERR_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_hch_halt(usbx, chn); + usb_chh->hcint = USB_OTG_HC_DTGLERR_FLAG | USB_OTG_HC_NAK_FLAG; + uhost->hch[chn].state = HCH_DATATGLERR; + } + + else if(hcint_value & USB_OTG_HC_FRMOVRRUN_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_hch_halt(usbx, chn); + usb_chh->hcint = USB_OTG_HC_FRMOVRRUN_FLAG; + } + else if(hcint_value & USB_OTG_HC_XFERC_FLAG) + { + uhost->hch[chn].state = HCH_XFRC; + usb_chh->hcint = USB_OTG_HC_XFERC_FLAG; + + if(usb_chh->hcchar_bit.eptype == EPT_BULK_TYPE || usb_chh->hcchar_bit.eptype == EPT_CONTROL_TYPE) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_hch_halt(usbx, chn); + usb_chh->hcint = USB_OTG_HC_NAK_FLAG; + } + else if(usb_chh->hcchar_bit.eptype == EPT_INT_TYPE) + { + usb_chh->hcchar_bit.oddfrm = TRUE; + uhost->urb_state[chn] = URB_DONE; + } + else if(usb_chh->hcchar_bit.eptype == EPT_ISO_TYPE) + { + uhost->urb_state[chn] = URB_DONE; + } + uhost->hch[chn].toggle_in ^= 1; + } + else if(hcint_value & USB_OTG_HC_CHHLTD_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = FALSE; + if(uhost->hch[chn].state == HCH_XFRC ) + { + uhost->urb_state[chn] = URB_DONE; + } + else if(uhost->hch[chn].state == HCH_STALL) + { + uhost->urb_state[chn] = URB_STALL; + } + else if(uhost->hch[chn].state == HCH_XACTERR || + uhost->hch[chn].state == HCH_DATATGLERR) + { + uhost->err_cnt[chn] ++; + if(uhost->err_cnt[chn] > 3) + { + uhost->urb_state[chn] = URB_ERROR; + uhost->err_cnt[chn] = 0; + } + else + { + uhost->urb_state[chn] = URB_NOTREADY; + } + if(usb_chh->hcchar_bit.eptype == EPT_CONTROL_TYPE || + usb_chh->hcchar_bit.eptype == EPT_BULK_TYPE) + { + usb_chh->hcchar_bit.chdis = FALSE; + usb_chh->hcchar_bit.chena = TRUE; + } + } + else if(uhost->hch[chn].state == HCH_NAK) + { + if(usb_chh->hcchar_bit.eptype == EPT_CONTROL_TYPE || + usb_chh->hcchar_bit.eptype == EPT_BULK_TYPE) + { + usb_chh->hcchar_bit.chdis = FALSE; + usb_chh->hcchar_bit.chena = TRUE; + } + uhost->urb_state[chn] = URB_NOTREADY; + } + usb_chh->hcint = USB_OTG_HC_CHHLTD_FLAG; + } + else if(hcint_value & USB_OTG_HC_XACTERR_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + uhost->hch[chn].state = HCH_XACTERR; + usb_hch_halt(usbx, chn); + uhost->err_cnt[chn] ++; + usb_chh->hcint = USB_OTG_HC_XACTERR_FLAG; + } + else if(hcint_value & USB_OTG_HC_NAK_FLAG) + { + if(usb_chh->hcchar_bit.eptype == EPT_INT_TYPE) + { + uhost->err_cnt[chn] = 0; + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_hch_halt(usbx, chn); + } + else if(usb_chh->hcchar_bit.eptype == EPT_BULK_TYPE || + usb_chh->hcchar_bit.eptype == EPT_CONTROL_TYPE) + { + uhost->err_cnt[chn] = 0; + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_hch_halt(usbx, chn); + } + uhost->hch[chn].state = HCH_NAK; + usb_chh->hcint = USB_OTG_HC_NAK_FLAG; + } + else if(hcint_value & USB_OTG_HC_BBLERR_FLAG) + { + usb_chh->hcint = USB_OTG_HC_BBLERR_FLAG; + } +} + +/** + * @brief usb host out transfer request handler + * @param uhost: to the structure of usbh_core_type + * @param chn: channel number + * @retval none + */ +void usbh_hch_out_handler(usbh_core_type *uhost, uint8_t chn) +{ + otg_global_type *usbx = uhost->usb_reg; + otg_hchannel_type *usb_chh = USB_CHL(usbx, chn); + uint32_t hcint_value = usb_chh->hcint; + hcint_value &= usb_chh->hcintmsk; + + if( hcint_value & USB_OTG_HC_ACK_FLAG) + { + usb_chh->hcint = USB_OTG_HC_ACK_FLAG; + } + else if( hcint_value & USB_OTG_HC_FRMOVRRUN_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_hch_halt(usbx, chn); + usb_chh->hcint = USB_OTG_HC_FRMOVRRUN_FLAG; + } + else if( hcint_value & USB_OTG_HC_XFERC_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_hch_halt(usbx, chn); + uhost->hch[chn].state = HCH_XFRC; + usb_chh->hcint = USB_OTG_HC_XFERC_FLAG; + } + else if( hcint_value & USB_OTG_HC_STALL_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_chh->hcint = USB_OTG_HC_STALL_FLAG; + uhost->hch[chn].state = HCH_STALL; + usb_hch_halt(usbx, chn); + } + else if( hcint_value & USB_OTG_HC_DTGLERR_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + usb_hch_halt(usbx, chn); + usb_chh->hcint = USB_OTG_HC_DTGLERR_FLAG | USB_OTG_HC_NAK_FLAG; + uhost->hch[chn].state = HCH_DATATGLERR; + } + else if( hcint_value & USB_OTG_HC_CHHLTD_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = FALSE; + if(uhost->hch[chn].state == HCH_XFRC) + { + uhost->urb_state[chn] = URB_DONE; + if(uhost->hch[chn].ept_type == EPT_BULK_TYPE || + uhost->hch[chn].ept_type == EPT_INT_TYPE) + { + uhost->hch[chn].toggle_out ^= 1; + } + } + else if(uhost->hch[chn].state == HCH_NAK) + { + uhost->urb_state[chn] = URB_NOTREADY; + } + else if(uhost->hch[chn].state == HCH_STALL) + { + uhost->urb_state[chn] = URB_STALL; + } + else if(uhost->hch[chn].state == HCH_XACTERR || + uhost->hch[chn].state == HCH_DATATGLERR) + { + uhost->err_cnt[chn] ++; + if(uhost->err_cnt[chn] > 3) + { + uhost->urb_state[chn] = URB_ERROR; + uhost->err_cnt[chn] = 0; + } + else + { + uhost->urb_state[chn] = URB_NOTREADY; + } + + usb_chh->hcchar_bit.chdis = FALSE; + usb_chh->hcchar_bit.chena = TRUE; + } + usb_chh->hcint = USB_OTG_HC_CHHLTD_FLAG; + } + else if( hcint_value & USB_OTG_HC_XACTERR_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + uhost->err_cnt[chn] ++; + uhost->hch[chn].state = HCH_XACTERR; + usb_hch_halt(usbx, chn); + usb_chh->hcint = USB_OTG_HC_XACTERR_FLAG | USB_OTG_HC_NAK_FLAG; + } + else if( hcint_value & USB_OTG_HC_NAK_FLAG) + { + usb_chh->hcintmsk_bit.chhltdmsk = TRUE; + uhost->err_cnt[chn] = 0; + usb_hch_halt(usbx, chn); + uhost->hch[chn].state = HCH_NAK; + usb_chh->hcint = USB_OTG_HC_NAK_FLAG; + } +} + +/** + * @brief usb host channel request handler + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +void usbh_hch_handler(usbh_core_type *uhost) +{ + otg_global_type *usbx = uhost->usb_reg; + otg_host_type *usb_host = OTG_HOST(usbx); + uint32_t intsts, i_index; + + intsts = usb_host->haint & 0xFFFF; + for(i_index = 0; i_index < 16; i_index ++) + { + if(intsts & (1 << i_index)) + { + if(USB_CHL(usbx, i_index)->hcchar_bit.eptdir) + { + //hc in + usbh_hch_in_handler(uhost, i_index); + } + else + { + //hc out + usbh_hch_out_handler(uhost, i_index); + } + } + } +} + +/** + * @brief usb host rx buffer not empty request handler + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +void usbh_rx_qlvl_handler(usbh_core_type *uhost) +{ + uint8_t chn; + uint32_t pktsts; + uint32_t pktcnt; + uint32_t tmp; + otg_hchannel_type *ch; + otg_global_type *usbx = uhost->usb_reg; + + usbx->gintmsk_bit.rxflvlmsk = 0; + + tmp = usbx->grxstsp; + chn = tmp & 0xF; + pktsts = (tmp >> 17) & 0xF; + pktcnt = (tmp >> 4) & 0x7FF; + ch = USB_CHL(usbx, chn); + switch(pktsts) + { + case PKTSTS_IN_DATA_PACKET_RECV: + if(pktcnt > 0 && (uhost->hch[chn].trans_buf) != 0) + { + usb_read_packet(usbx, uhost->hch[chn].trans_buf, chn, pktcnt); + uhost->hch[chn].trans_buf += pktcnt; + uhost->hch[chn].trans_count += pktcnt; + + if(ch->hctsiz_bit.pktcnt > 0) + { + ch->hcchar_bit.chdis = FALSE; + ch->hcchar_bit.chena = TRUE; + uhost->hch[chn].toggle_in ^= 1; + } + } + break; + case PKTSTS_IN_TRANSFER_COMPLETE: + break; + case PKTSTS_DATA_BIT_ERROR: + break; + case PKTSTS_CHANNEL_STOP: + break; + default: + break; + + } + usbx->gintmsk_bit.rxflvlmsk = 1; +} + +/** + * @brief usb host port request handler + * @param uhost: to the structure of usbh_core_type + * @retval none + */ +void usbh_port_handler(usbh_core_type *uhost) +{ + otg_global_type *usbx = uhost->usb_reg; + otg_host_type *usb_host = OTG_HOST(usbx); + + uint32_t prt = 0, prt_0; + + prt = usb_host->hprt; + prt_0 = prt; + + prt_0 &= ~(USB_OTG_HPRT_PRTENA | USB_OTG_HPRT_PRTENCHNG | + USB_OTG_HPRT_PRTOVRCACT | USB_OTG_HPRT_PRTCONDET); + if(prt & USB_OTG_HPRT_PRTCONDET) + { + if(prt & USB_OTG_HPRT_PRTCONSTS) + { + /* connect callback */ + uhost->conn_sts = 1; + } + prt_0 |= USB_OTG_HPRT_PRTCONDET; + } + + if(prt & USB_OTG_HPRT_PRTENCHNG) + { + prt_0 |= USB_OTG_HPRT_PRTENCHNG; + + if(prt & USB_OTG_HPRT_PRTENA) + { + if((prt & USB_OTG_HPRT_PRTSPD) == (USB_PRTSPD_LOW_SPEED << 17)) + { + usbh_fsls_clksel(usbx, USB_HCFG_CLK_6M); + } + else + { + usbh_fsls_clksel(usbx, USB_HCFG_CLK_48M); + } + /* connect callback */ + uhost->port_enable = 1; + } + else + { + /* clean up hprt */ + uhost->port_enable = 0; + } + } + + if(prt & USB_OTG_HPRT_PRTOVRCACT) + { + prt_0 |= USB_OTG_HPRT_PRTOVRCACT; + } + + usb_host->hprt = prt_0; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/armlib/at32_usb/usbd_class/cdc/cdc_class.c b/armlib/at32_usb/usbd_class/cdc/cdc_class.c new file mode 100644 index 000000000..ed551c4eb --- /dev/null +++ b/armlib/at32_usb/usbd_class/cdc/cdc_class.c @@ -0,0 +1,375 @@ +#include "usbd_core.h" +#include "cdc_class.h" + +static usb_sts_type class_init_handler(void *udev); + +static usb_sts_type class_clear_handler(void *udev); + +static usb_sts_type class_setup_handler(void *udev, usb_setup_type *setup); + +static usb_sts_type class_ept0_tx_handler(void *udev); + +static usb_sts_type class_ept0_rx_handler(void *udev); + +static usb_sts_type class_in_handler(void *udev, uint8_t ept_num); + +static usb_sts_type class_out_handler(void *udev, uint8_t ept_num); + +static usb_sts_type class_sof_handler(void *udev); + +static usb_sts_type class_event_handler(void *udev, usbd_event_type event); + +static usb_sts_type cdc_struct_init(cdc_struct_type *pcdc); + +extern void usb_usart_config(linecoding_type linecoding); + +static void usb_vcp_cmd_process(void *udev, uint8_t cmd, uint8_t *buff, uint16_t len); + +linecoding_type linecoding = +{ + 115200, + 0, + 0, + 8 +}; + +/* cdc data struct */ +cdc_struct_type cdc_struct; + +/* usb device class handler */ +usbd_class_handler cdc_class_handler = +{ + class_init_handler, + class_clear_handler, + class_setup_handler, + class_ept0_tx_handler, + class_ept0_rx_handler, + class_in_handler, + class_out_handler, + class_sof_handler, + class_event_handler, + &cdc_struct +}; + +/** + * @brief initialize usb custom hid endpoint + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type class_init_handler(void *udev) { + usb_sts_type status = USB_OK; + usbd_core_type *pudev = (usbd_core_type *) udev; + cdc_struct_type *pcdc = (cdc_struct_type *) pudev->class_handler->pdata; + + /* init cdc struct */ + cdc_struct_init(pcdc); + + /* open in endpoint */ + usbd_ept_open(pudev, USBD_CDC_INT_EPT, EPT_INT_TYPE, USBD_CDC_CMD_MAXPACKET_SIZE); + + /* open in endpoint */ + usbd_ept_open(pudev, USBD_CDC_BULK_IN_EPT, EPT_BULK_TYPE, USBD_CDC_IN_MAXPACKET_SIZE); + + /* open out endpoint */ + usbd_ept_open(pudev, USBD_CDC_BULK_OUT_EPT, EPT_BULK_TYPE, USBD_CDC_OUT_MAXPACKET_SIZE); + + /* set out endpoint to receive status */ + usbd_ept_recv(pudev, USBD_CDC_BULK_OUT_EPT, pcdc->g_rx_buff, USBD_CDC_OUT_MAXPACKET_SIZE); + + return status; +} + +/** + * @brief clear endpoint or other state + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type class_clear_handler(void *udev) { + usb_sts_type status = USB_OK; + usbd_core_type *pudev = (usbd_core_type *) udev; + + /* close in endpoint */ + usbd_ept_close(pudev, USBD_CDC_INT_EPT); + + /* close in endpoint */ + usbd_ept_close(pudev, USBD_CDC_BULK_IN_EPT); + + /* close out endpoint */ + usbd_ept_close(pudev, USBD_CDC_BULK_OUT_EPT); + + return status; +} + +/** + * @brief usb device class setup request handler + * @param udev: to the structure of usbd_core_type + * @param setup: setup packet + * @retval status of usb_sts_type + */ +static usb_sts_type class_setup_handler(void *udev, usb_setup_type *setup) { + usb_sts_type status = USB_OK; + usbd_core_type *pudev = (usbd_core_type *) udev; + cdc_struct_type *pcdc = (cdc_struct_type *) pudev->class_handler->pdata; + + switch (setup->bmRequestType & USB_REQ_TYPE_RESERVED) { + /* class request */ + case USB_REQ_TYPE_CLASS: + if (setup->wLength) { + if (setup->bmRequestType & USB_REQ_DIR_DTH) { + usb_vcp_cmd_process(udev, setup->bRequest, pcdc->g_cmd, setup->wLength); + usbd_ctrl_send(pudev, pcdc->g_cmd, setup->wLength); + } else { + pcdc->g_req = setup->bRequest; + pcdc->g_len = setup->wLength; + usbd_ctrl_recv(pudev, pcdc->g_cmd, pcdc->g_len); + } + } + break; + /* standard request */ + case USB_REQ_TYPE_STANDARD: + switch (setup->bRequest) { + case USB_STD_REQ_GET_DESCRIPTOR: + usbd_ctrl_unsupport(pudev); + break; + case USB_STD_REQ_GET_INTERFACE: + usbd_ctrl_send(pudev, (uint8_t *) &pcdc->alt_setting, 1); + break; + case USB_STD_REQ_SET_INTERFACE: + pcdc->alt_setting = setup->wValue; + break; + case USB_STD_REQ_CLEAR_FEATURE: + break; + case USB_STD_REQ_SET_FEATURE: + break; + default: + usbd_ctrl_unsupport(pudev); + break; + } + break; + default: + usbd_ctrl_unsupport(pudev); + break; + } + return status; +} + +/** + * @brief usb device endpoint 0 in status stage complete + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type class_ept0_tx_handler(void *udev) { + usb_sts_type status = USB_OK; + + /* ...user code... */ + + return status; +} + +/** + * @brief usb device endpoint 0 out status stage complete + * @param udev: usb device core handler type + * @retval status of usb_sts_type + */ +static usb_sts_type class_ept0_rx_handler(void *udev) { + usb_sts_type status = USB_OK; + usbd_core_type *pudev = (usbd_core_type *) udev; + cdc_struct_type *pcdc = (cdc_struct_type *) pudev->class_handler->pdata; + uint32_t recv_len = usbd_get_recv_len(pudev, 0); + /* ...user code... */ + if (pcdc->g_req == SET_LINE_CODING) { + /* class process */ + usb_vcp_cmd_process(udev, pcdc->g_req, pcdc->g_cmd, recv_len); + } + + return status; +} + +/** + * @brief usb device transmision complete handler + * @param udev: to the structure of usbd_core_type + * @param ept_num: endpoint number + * @retval status of usb_sts_type + */ +static usb_sts_type class_in_handler(void *udev, uint8_t ept_num) { + usbd_core_type *pudev = (usbd_core_type *) udev; + cdc_struct_type *pcdc = (cdc_struct_type *) pudev->class_handler->pdata; + usb_sts_type status = USB_OK; + + /* ...user code... + trans next packet data + */ + usbd_flush_tx_fifo(pudev, ept_num); + pcdc->g_tx_completed = 1; + + return status; +} + +/** + * @brief usb device endpoint receive data + * @param udev: to the structure of usbd_core_type + * @param ept_num: endpoint number + * @retval status of usb_sts_type + */ +static usb_sts_type class_out_handler(void *udev, uint8_t ept_num) { + usb_sts_type status = USB_OK; + usbd_core_type *pudev = (usbd_core_type *) udev; + cdc_struct_type *pcdc = (cdc_struct_type *) pudev->class_handler->pdata; + + /* get endpoint receive data length */ + pcdc->g_rxlen = usbd_get_recv_len(pudev, ept_num); + + /*set recv flag*/ + pcdc->g_rx_completed = 1; + + return status; +} + +/** + * @brief usb device sof handler + * @param udev: to the structure of usbd_core_type + * @retval status of usb_sts_type + */ +static usb_sts_type class_sof_handler(void *udev) { + usb_sts_type status = USB_OK; + + /* ...user code... */ + + return status; +} + +/** + * @brief usb device event handler + * @param udev: to the structure of usbd_core_type + * @param event: usb device event + * @retval status of usb_sts_type + */ +static usb_sts_type class_event_handler(void *udev, usbd_event_type event) { + usb_sts_type status = USB_OK; + switch (event) { + case USBD_RESET_EVENT: + + /* ...user code... */ + + break; + case USBD_SUSPEND_EVENT: + + /* ...user code... */ + + break; + case USBD_WAKEUP_EVENT: + /* ...user code... */ + + break; + case USBD_INISOINCOM_EVENT: + break; + case USBD_OUTISOINCOM_EVENT: + break; + + default: + break; + } + return status; +} + +/** + * @brief usb device cdc init + * @param pcdc: to the structure of cdc_struct + * @retval status of usb_sts_type + */ +static usb_sts_type cdc_struct_init(cdc_struct_type *pcdc) { + pcdc->g_tx_completed = 1; + pcdc->g_rx_completed = 0; + pcdc->alt_setting = 0; + pcdc->linecoding.bitrate = linecoding.bitrate; + pcdc->linecoding.data = linecoding.data; + pcdc->linecoding.format = linecoding.format; + pcdc->linecoding.parity = linecoding.parity; + return USB_OK; +} + +/** + * @brief usb device class rx data process + * @param udev: to the structure of usbd_core_type + * @param recv_data: receive buffer + * @param buflen: the max length of 'recv_data' + * @retval receive data len + */ +uint16_t usb_vcp_get_rxdata(void *udev, uint8_t *recv_data, uint16_t buflen) { + uint16_t i_index = 0; + uint16_t tmp_len = 0; + usbd_core_type *pudev = (usbd_core_type *) udev; + cdc_struct_type *pcdc = (cdc_struct_type *) pudev->class_handler->pdata; + + if (pcdc->g_rx_completed == 0) { + return 0; + } + pcdc->g_rx_completed = 0; + tmp_len = MIN(pcdc->g_rxlen, buflen); + for (i_index = 0; i_index < tmp_len; i_index++) { + recv_data[i_index] = pcdc->g_rx_buff[i_index]; + } + + // Next receive enable. + usbd_ept_recv(pudev, USBD_CDC_BULK_OUT_EPT, pcdc->g_rx_buff, USBD_CDC_OUT_MAXPACKET_SIZE); + + return tmp_len; +} + +/** + * @brief usb device class send data + * @param udev: to the structure of usbd_core_type + * @param send_data: send data buffer + * @param len: send length + * @retval error status + */ +error_status usb_vcp_send_data(void *udev, uint8_t *send_data, uint16_t len) { + error_status status = SUCCESS; + usbd_core_type *pudev = (usbd_core_type *) udev; + cdc_struct_type *pcdc = (cdc_struct_type *) pudev->class_handler->pdata; + if (pcdc->g_tx_completed) { + pcdc->g_tx_completed = 0; + usbd_ept_send(pudev, USBD_CDC_BULK_IN_EPT, send_data, len); + } else { + status = ERROR; + } + return status; +} + +/** + * @brief usb device function + * @param udev: to the structure of usbd_core_type + * @param cmd: request number + * @param buff: request buffer + * @param len: buffer length + * @retval none + */ +static void usb_vcp_cmd_process(void *udev, uint8_t cmd, uint8_t *buff, uint16_t len) { + usbd_core_type *pudev = (usbd_core_type *) udev; + cdc_struct_type *pcdc = (cdc_struct_type *) pudev->class_handler->pdata; + switch (cmd) { + case SET_LINE_CODING: + pcdc->linecoding.bitrate = (uint32_t) (buff[0] | (buff[1] << 8) | (buff[2] << 16) | (buff[3] << 24)); + pcdc->linecoding.format = buff[4]; + pcdc->linecoding.parity = buff[5]; + pcdc->linecoding.data = buff[6]; +#ifdef USB_VIRTUAL_COMPORT + /* set hardware usart */ + usb_usart_config(pcdc->linecoding); +#endif + break; + + case GET_LINE_CODING: + buff[0] = (uint8_t) pcdc->linecoding.bitrate; + buff[1] = (uint8_t) (pcdc->linecoding.bitrate >> 8); + buff[2] = (uint8_t) (pcdc->linecoding.bitrate >> 16); + buff[3] = (uint8_t) (pcdc->linecoding.bitrate >> 24); + buff[4] = (uint8_t) (pcdc->linecoding.format); + buff[5] = (uint8_t) (pcdc->linecoding.parity); + buff[6] = (uint8_t) (pcdc->linecoding.data); + break; + + default: + break; + } +} diff --git a/armlib/at32_usb/usbd_class/cdc/cdc_class.h b/armlib/at32_usb/usbd_class/cdc/cdc_class.h new file mode 100644 index 000000000..1487a1226 --- /dev/null +++ b/armlib/at32_usb/usbd_class/cdc/cdc_class.h @@ -0,0 +1,79 @@ +#ifndef __CDC_CLASS_H +#define __CDC_CLASS_H + +#ifdef __cplusplus +extern "C" { + +#endif + +#include "usb_std.h" +#include "usbd_core.h" + +/** + * @brief usb cdc use endpoint define + */ +#define USBD_CDC_INT_EPT 0x82 +#define USBD_CDC_BULK_IN_EPT 0x81 +#define USBD_CDC_BULK_OUT_EPT 0x01 + +/** + * @brief usb cdc in and out max packet size define + */ +#define USBD_CDC_IN_MAXPACKET_SIZE 0x40 +#define USBD_CDC_OUT_MAXPACKET_SIZE 0x40 +#define USBD_CDC_CMD_MAXPACKET_SIZE 0x08 + +/** + * @brief usb cdc class struct + */ +typedef struct { + uint32_t alt_setting; + uint8_t g_rx_buff[USBD_CDC_OUT_MAXPACKET_SIZE]; + uint8_t g_cmd[USBD_CDC_CMD_MAXPACKET_SIZE]; + uint8_t g_req; + uint16_t g_len, g_rxlen; + __IO uint8_t g_tx_completed, g_rx_completed; + linecoding_type linecoding; +} cdc_struct_type; + + +/** + * @} + */ + +/** @defgroup USB_cdc_class_exported_functions + * @{ + */ + +extern usbd_class_handler cdc_class_handler; + +// packet send & recv +uint16_t usb_vcp_get_rxdata(void *udev, uint8_t *recv_data, uint16_t buflen); + +error_status usb_vcp_send_data(void *udev, uint8_t *send_data, uint16_t len); + +// buffer send +error_status usb_vcp_buffer_send_start(void *udev); + +void usb_vcp_buffer_send_push(void *udev, uint8_t b); + +void usb_vcp_buffer_send_flush(void *udev); + +error_status usb_vcp_buffer_send_stop(void *udev); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/armlib/at32_usb/usbd_class/cdc/cdc_desc.c b/armlib/at32_usb/usbd_class/cdc/cdc_desc.c new file mode 100644 index 000000000..f920c289f --- /dev/null +++ b/armlib/at32_usb/usbd_class/cdc/cdc_desc.c @@ -0,0 +1,185 @@ +#include "stdio.h" +#include "usbd_core.h" +#include "usb_cdc_desc.h" + + +static usbd_desc_t *get_device_descriptor(void); + +static usbd_desc_t *get_device_qualifier(void); + +static usbd_desc_t *get_device_configuration(void); + +static usbd_desc_t *get_device_other_speed(void); + +static usbd_desc_t *get_device_lang_id(void); + +static usbd_desc_t *get_device_manufacturer_string(void); + +static usbd_desc_t *get_device_product_string(void); + +static usbd_desc_t *get_device_serial_string(void); + +static usbd_desc_t *get_device_interface_string(void); + +static usbd_desc_t *get_device_config_string(void); + +static usbd_desc_t *get_winusb_os_string(void); + +/** + * @brief device descriptor handler structure + */ +usbd_desc_handler cdc_desc_handler = +{ + get_device_descriptor, + get_device_qualifier, + get_device_configuration, + get_device_other_speed, + get_device_lang_id, + // --- + get_device_manufacturer_string, + get_device_product_string, + get_device_serial_string, + get_device_interface_string, + get_device_config_string, + // --- + get_winusb_os_string, + NULL, + NULL +}; + + +/* device descriptor */ +static usbd_desc_t device_descriptor = +{ + sizeof(devDescriptor), + (uint8_t *) devDescriptor +}; + +/* config descriptor */ +static usbd_desc_t config_descriptor = +{ + sizeof(cfgDescriptor), + (uint8_t *) cfgDescriptor +}; + +/* langid descriptor */ +static usbd_desc_t langid_descriptor = +{ + sizeof(StrLanguageCodes), + (uint8_t *) StrLanguageCodes +}; + +/* serial descriptor */ +static usbd_desc_t serial_descriptor = +{ + sizeof(StrSerialNumber), + (uint8_t *) StrSerialNumber +}; + +static usbd_desc_t vp_desc; + +/** + * @brief get device descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_descriptor(void) { + return &device_descriptor; +} + +/** + * @brief get device qualifier + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_qualifier(void) { + return NULL; +} + +/** + * @brief get config descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_configuration(void) { + return &config_descriptor; +} + +/** + * @brief get other speed descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_other_speed(void) { + return NULL; +} + +/** + * @brief get lang id descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_lang_id(void) { + return &langid_descriptor; +} + + +/** + * @brief get manufacturer descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_manufacturer_string(void) { + vp_desc.length = StrManufacturer[0]; + vp_desc.descriptor = (uint8_t *) StrManufacturer; + return &vp_desc; +} + +/** + * @brief get product descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_product_string(void) { + vp_desc.length = StrProduct[0]; + vp_desc.descriptor = (uint8_t *) StrProduct; + return &vp_desc; +} + +/** + * @brief get serial descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_serial_string(void) { + return &serial_descriptor; +} + +/** + * @brief get interface descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_interface_string(void) { + return NULL; +} + +/** + * @brief get device config descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_device_config_string(void) { + return NULL; +} + +/** + * @brief get device config descriptor + * @param none + * @retval usbd_desc + */ +static usbd_desc_t *get_winusb_os_string(void) { + vp_desc.length = StrMS_OSDescriptor[0]; + vp_desc.descriptor = (uint8_t *) StrMS_OSDescriptor; + return &vp_desc; +} From 83114823ecf3beb0869ebd6b9240e04e2b3990f0 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 15:37:23 +0800 Subject: [PATCH 17/43] Added cmdfpga for client. --- client/Makefile | 1 + client/src/cmdfpga.c | 192 +++++++++++++++++++++++++++++++++++++++++++ client/src/cmdfpga.h | 6 ++ 3 files changed, 199 insertions(+) create mode 100644 client/src/cmdfpga.c create mode 100644 client/src/cmdfpga.h diff --git a/client/Makefile b/client/Makefile index 13bb06ff7..cc3feb156 100644 --- a/client/Makefile +++ b/client/Makefile @@ -769,6 +769,7 @@ SRCS = mifare/aiddesfire.c \ cmdhfvas.c \ cmdhfxerox.c \ cmdhw.c \ + cmdfpga.c \ cmdlf.c \ cmdlfawid.c \ cmdlfcotag.c \ diff --git a/client/src/cmdfpga.c b/client/src/cmdfpga.c new file mode 100644 index 000000000..dd2dba0da --- /dev/null +++ b/client/src/cmdfpga.c @@ -0,0 +1,192 @@ +#include "fileutils.h" +#include "cmdparser.h" // command_t +#include "cliparser.h" +#include "comms.h" +#include "cmdfpga.h" +#include "ui.h" + +static int CmdHelp(const char *Cmd); + +static int CmdConfigFpga(const char *Cmd) { + CLIParserContext *ctx; + CLIParserInit(&ctx, "hw fpga config ", + "Read the bin file and write it to the fpga [sram|flash]", + "hw fpga config -s -f myfile -> config fpga sram by bin file\n" + "hw fpga config -f myfile -> config fpga flash by bin file\n" + ); + + void *argtable[] = { + arg_param_begin, + arg_lit0("s", "sram", "config to sram, or config to flash"), + arg_str0("f", "file", "", "save to file, not suffix include"), + arg_param_end + }; + CLIExecWithReturn(ctx, Cmd, argtable, false); + + // config to sram or flash by -s option + bool sram_mode = arg_get_lit(ctx, 1); + + // check for -file option first to determine the output mode + int fnlen = 0; + char filename[FILE_PATH_SIZE] = {0}; + CLIParamStrToBuf(arg_get_str(ctx, 2), (uint8_t *)filename, FILE_PATH_SIZE, &fnlen); + + CLIParserFree(ctx); + + // Check if file name is provided + if (fnlen == 0) { + PrintAndLogEx(WARNING, "No file specified"); + return PM3_EINVARG; + } + + // Load the file content into data buffer + uint8_t *data = NULL; + size_t datalen = 0; + int res = loadFile_safe(filename, ".bin", (void **)&data, &datalen); + if (res != PM3_SUCCESS) { + free(data); + return PM3_EFILE; + } + + // TODO DXL Maybe length check for device model is required. + // coming soon + + // TODO DXL check response result is required + + struct { + uint8_t sram_mode; + uint32_t file_length; + } PACKED params; + params.sram_mode = sram_mode; + params.file_length = datalen; + + PacketResponseNG resp; + PrintAndLogEx(INFO, "Starting FPGA configuration in " _YELLOW_("%s"), sram_mode ? "SRAM" : "Flash"); + + // Start fpga config by mode + SendCommandNG(CMD_FPGA_BITSTREAM_CONFIG_START, (uint8_t *)¶ms, sizeof(params)); + // Wait for response before sending data + if (WaitForResponseTimeout(CMD_FPGA_BITSTREAM_CONFIG_START, &resp, 15000) == false) { + PrintAndLogEx(WARNING, "start config for fpga timeout while waiting for reply"); + free(data); + return PM3_ETIMEOUT; + } + if (resp.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "Failed to start FPGA configuration: %d", resp.status); + free(data); + return resp.status; + } + + // Start to send data in chunks + size_t offset = 0; + while (offset < datalen) { + size_t chunk_size = (datalen - offset) > PM3_CMD_DATA_SIZE ? PM3_CMD_DATA_SIZE : (datalen - offset); + SendCommandNG(CMD_FPGA_BITSTREAM_CONFIG_WRITE, data + offset, chunk_size); + // Wait for response before sending next chunk + if (WaitForResponseTimeout(CMD_FPGA_BITSTREAM_CONFIG_WRITE, &resp, 5000) == false) { + PrintAndLogEx(WARNING, "transfer data for fpga timeout while waiting for reply"); + free(data); + return PM3_ETIMEOUT; + } + if (resp.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "Failed to transfer FPGA configuration data: %d", resp.status); + free(data); + return resp.status; + } + offset += chunk_size; + // Print progress + PrintAndLogEx(INFO, "Sent "_YELLOW_("%zu")" bytes, progress: "_YELLOW_("%.2f%%"), chunk_size, (offset / (float)datalen) * 100); + } + + PrintAndLogEx(SUCCESS, "FPGA configuration transfer complete!"); + + // Stop fpga config + SendCommandNG(CMD_FPGA_BITSTREAM_CONFIG_FINISH, NULL, 0); + if (WaitForResponseTimeout(CMD_FPGA_BITSTREAM_CONFIG_FINISH, &resp, 5000) == false) { + PrintAndLogEx(WARNING, "stop config for fpga timeout while waiting for reply"); + free(data); + return PM3_ETIMEOUT; + } + if (resp.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "Failed to finish FPGA configuration: %d", resp.status); + free(data); + return resp.status; + } + + PrintAndLogEx(SUCCESS, "FPGA configuration successfully!"); + free(data); + return PM3_SUCCESS; +} + +static int CmdFpgaSetPowerPWM(const char *Cmd) { + CLIParserContext *ctx; + CLIParserInit(&ctx, "hw fpga pwrpwm ", + "Set the proportion of low levels of PWM output from FPGA for controlling driver voltage.", + "hw fpga pwrpwm -c 1000 -> Set pwm low-level count to 1000 for HF driver power.\n" + "hw fpga pwrpwm -c 1000 -l -> Set pwm low-level count to 1000 for LF driver power.\n"); + + void *argtable[] = { + arg_param_begin, + arg_lit0("l", "lf", "Set the driver voltage for LF. When not specified as LF, default setting for HF."), + arg_int0("c", "count", "", "PWM output low level counting used to control the voltage of the driver. " + "The larger the value, the higher the voltage; " + "the smaller the value, the lower the voltage."), + arg_param_end + }; + CLIExecWithReturn(ctx, Cmd, argtable, false); + + // Is setting for lf? + bool is_lf = arg_get_lit(ctx, 1); + // the count of low levels of pwm output + int count = arg_get_int_def(ctx, 2, 1000); + + CLIParserFree(ctx); + + // TODO DXL check response result is required + + if (count < 0 || count > 4095) { + PrintAndLogEx(ERR, "Invalid count value: %d. It should be between 0 and 4095.", count); + return PM3_EINVARG; + } + + struct { + uint8_t is_lf; + uint16_t count; + } PACKED params = { + .is_lf = is_lf, + .count = count, + }; + + // Start fpga config by mode + PacketResponseNG resp; + SendCommandNG(CMD_FPGA_CMD_SET_PWR_PWM_LOW_COUNT, (uint8_t *)¶ms, sizeof(params)); + PrintAndLogEx(INFO, "PWM value: " _YELLOW_("%d") ", for %s", count, is_lf ? "LF driver" : "HF driver"); + + // Wait for response before sending data + if (WaitForResponseTimeout(CMD_FPGA_CMD_SET_PWR_PWM_LOW_COUNT, &resp, 15000) == false) { + PrintAndLogEx(WARNING, "set power pwm for fpga timeout while waiting for reply"); + return PM3_ETIMEOUT; + } + + PrintAndLogEx(SUCCESS, "Set PWM to FPGA for driver power control complete!"); + return PM3_SUCCESS; +} + +static command_t CommandTable[] = { + {"help", CmdHelp, AlwaysAvailable, "This help"}, + {"-------------", CmdHelp, AlwaysAvailable, "----------------------- " _CYAN_("Operation") " -----------------------"}, + {"config", CmdConfigFpga, IfPm3Present, "Configure FPGA for sram or flash"}, + {"pwrpwm", CmdFpgaSetPowerPWM, IfPm3Present, "Adjust the input voltage of the driver through FPGA."}, + {NULL, NULL, NULL, NULL} +}; + +static int CmdHelp(const char *Cmd) { + (void)Cmd; // Cmd is not used so far + CmdsHelp(CommandTable); + return PM3_SUCCESS; +} + +int CmdFPGA(const char *Cmd) { + clearCommandBuffer(); + return CmdsParse(CommandTable, Cmd); +} \ No newline at end of file diff --git a/client/src/cmdfpga.h b/client/src/cmdfpga.h new file mode 100644 index 000000000..ecb51099f --- /dev/null +++ b/client/src/cmdfpga.h @@ -0,0 +1,6 @@ +#ifndef CMD_FPGA_H +#define CMD_FPGA_H + +int CmdFPGA(const char *Cmd); + +#endif // CMD_FPGA_H \ No newline at end of file From 7f946eb16fd5c1c6312ef846a42f807b8b1876f3 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Thu, 6 Aug 2026 19:18:32 +0800 Subject: [PATCH 18/43] Fixed an issue where compiling the client using CMake failed. --- client/CMakeLists.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/client/CMakeLists.txt b/client/CMakeLists.txt index 43fc3288e..a26d0d970 100644 --- a/client/CMakeLists.txt +++ b/client/CMakeLists.txt @@ -384,6 +384,7 @@ set (TARGET_SOURCES ${PM3_ROOT}/client/src/cmdanalyse.c ${PM3_ROOT}/client/src/cmdcrc.c ${PM3_ROOT}/client/src/cmddata.c + ${PM3_ROOT}/client/src/cmdfpga.c ${PM3_ROOT}/client/src/cmdflashmem.c ${PM3_ROOT}/client/src/cmdflashmemspiffs.c ${PM3_ROOT}/client/src/cmdhf.c From a061f080ed25f07edb3a7072c5b1ac0ecf022089 Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Thu, 6 Aug 2026 17:15:24 +0200 Subject: [PATCH 19/43] experimental_lib: add missing cmdfpga.c --- client/CMakeLists.txt | 2 +- client/experimental_lib/CMakeLists.txt | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/client/CMakeLists.txt b/client/CMakeLists.txt index a26d0d970..aaa22bd9a 100644 --- a/client/CMakeLists.txt +++ b/client/CMakeLists.txt @@ -384,9 +384,9 @@ set (TARGET_SOURCES ${PM3_ROOT}/client/src/cmdanalyse.c ${PM3_ROOT}/client/src/cmdcrc.c ${PM3_ROOT}/client/src/cmddata.c - ${PM3_ROOT}/client/src/cmdfpga.c ${PM3_ROOT}/client/src/cmdflashmem.c ${PM3_ROOT}/client/src/cmdflashmemspiffs.c + ${PM3_ROOT}/client/src/cmdfpga.c ${PM3_ROOT}/client/src/cmdhf.c ${PM3_ROOT}/client/src/cmdhf14a.c ${PM3_ROOT}/client/src/cmdhf14b.c diff --git a/client/experimental_lib/CMakeLists.txt b/client/experimental_lib/CMakeLists.txt index 5c82868fb..0ebb32882 100644 --- a/client/experimental_lib/CMakeLists.txt +++ b/client/experimental_lib/CMakeLists.txt @@ -306,6 +306,7 @@ set (TARGET_SOURCES ${PM3_ROOT}/client/src/cmddata.c ${PM3_ROOT}/client/src/cmdflashmem.c ${PM3_ROOT}/client/src/cmdflashmemspiffs.c + ${PM3_ROOT}/client/src/cmdfpga.c ${PM3_ROOT}/client/src/cmdhf.c ${PM3_ROOT}/client/src/cmdhf14a.c ${PM3_ROOT}/client/src/cmdhf14b.c From f145871b7ef9e627849ebfd2e849d206e622f790 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 16:02:14 +0800 Subject: [PATCH 20/43] Added some cmd and struct definitions for proxmark5 --- include/pm3_cmd.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/include/pm3_cmd.h b/include/pm3_cmd.h index c1b744941..e3935726f 100644 --- a/include/pm3_cmd.h +++ b/include/pm3_cmd.h @@ -504,6 +504,19 @@ typedef struct { uint8_t data[]; } PACKED smart_card_raw_t; +typedef struct { + uint8_t factory_info_version; + uint8_t ecdsa_secp256k1_signature[64]; + struct { + uint64_t unix_timestamp; + uint8_t chip_unique_id[12]; + uint32_t production_id; + uint32_t hardware_version; + uint8_t aes_key[16]; + uint8_t reserved[147]; + } PACKED info; +} PACKED proxmark5_factory_info_v1_t; + // For the bootloader #define CMD_DEVICE_INFO 0x0000 // #define CMD_SETUP_WRITE 0x0001 @@ -512,6 +525,7 @@ typedef struct { #define CMD_START_FLASH 0x0005 #define CMD_CHIP_INFO 0x0006 #define CMD_BL_VERSION 0x0007 +#define CMD_CHIP_TYPE 0x0008 #define CMD_NACK 0x00fe #define CMD_ACK 0x00ff @@ -525,6 +539,7 @@ typedef struct { #define CMD_READ_MEM 0x0106 // legacy #define CMD_READ_MEM_DOWNLOAD 0x010A #define CMD_READ_MEM_DOWNLOADED 0x010B +#define CMD_MAIN_CHIP_UNIQUEID 0x010C #define CMD_VERSION 0x0107 #define CMD_STATUS 0x0108 #define CMD_PING 0x0109 @@ -546,6 +561,7 @@ typedef struct { #define CMD_FLASHMEM_WIPE 0x0122 #define CMD_FLASHMEM_DOWNLOAD 0x0123 #define CMD_FLASHMEM_DOWNLOADED 0x0124 +// DXL: I found that this command did not seem to have been used before, so it can be used to obtain the unique ID of FLASH MEM. #define CMD_FLASHMEM_INFO 0x0125 #define CMD_FLASHMEM_SET_SPIBAUDRATE 0x0126 #define CMD_FLASHMEM_PAGES64K 0x0127 @@ -607,6 +623,15 @@ typedef struct { #define CMD_USART_TXRX 0x0162 #define CMD_USART_CONFIG 0x0163 +// PM5, Dual frequency antenna control. +#define CMD_ANT_CONTROL_WRITE 0x0170 +#define CMD_ANT_CONTROL_READ 0x0171 +// PM5, EPPROM of factory info store +#define CMD_EEPROM_FACTORY_INFO_READ 0x0172 +#define CMD_EEPROM_FACTORY_INFO_WRITE 0x0173 +// PM5, QC test for the hardware +#define CMD_PM5_QC_TEST 0x0177 + // For low-frequency tags #define CMD_LF_TI_READ 0x0202 #define CMD_LF_TI_WRITE 0x0203 @@ -798,6 +823,14 @@ typedef struct { // For direct FPGA control #define CMD_FPGA_MAJOR_MODE_OFF 0x0500 +// For fpga config bitstream +#define CMD_FPGA_BITSTREAM_CONFIG_START 0x0501 +#define CMD_FPGA_BITSTREAM_CONFIG_WRITE 0x0502 +#define CMD_FPGA_BITSTREAM_CONFIG_FINISH 0x0503 + +// For fpga set pwm output for driver voltage adjust +#define CMD_FPGA_CMD_SET_PWR_PWM_LOW_COUNT 0x0504 + // For mifare commands #define CMD_HF_MIFARE_EML_MEMCLR 0x0601 #define CMD_HF_MIFARE_EML_MEMSET 0x0602 @@ -1121,6 +1154,9 @@ typedef struct { /* Set if this device understands the read memory command */ #define DEVICE_INFO_FLAG_UNDERSTANDS_READ_MEM (1 << 7) +/* Set if this device understands the chip type command */ +#define DEVICE_INFO_FLAG_UNDERSTANDS_CHIP_TYPE (1<<8) + #define BL_VERSION_MAJOR(version) ((uint32_t)(version) >> 22) #define BL_VERSION_MINOR(version) (((uint32_t)(version) >> 12) & 0x3ff) #define BL_VERSION_PATCH(version) ((uint32_t)(version) & 0xfff) From dca419413ba72358279ae597d554bfa107c6ab02 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 15:42:40 +0800 Subject: [PATCH 21/43] Added cmd(fpga, antennal, qc...) for Proxmark5 --- client/src/cmdhf.c | 10 +- client/src/cmdhw.c | 225 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 233 insertions(+), 2 deletions(-) diff --git a/client/src/cmdhf.c b/client/src/cmdhf.c index dc1aff1e7..3bd5fed91 100644 --- a/client/src/cmdhf.c +++ b/client/src/cmdhf.c @@ -373,12 +373,18 @@ int CmdHFTune(const char *Cmd) { break; } - if ((resp.status == PM3_EOPABORTED) || (resp.length != sizeof(uint16_t))) { + if ((resp.status == PM3_EOPABORTED) || (resp.length != sizeof(uint16_t) && resp.length != sizeof(uint32_t))) { PrintAndLogEx(NORMAL, ""); break; } - uint16_t volt = resp.data.asDwords[0] & 0xFFFF; + uint32_t volt; + if (resp.length == sizeof(uint16_t)) { + volt = resp.data.asDwords[0] & 0xFFFF; + } else { + volt = resp.data.asDwords[0]; // U32. It can exceed 65.535V. + } + if (first) { v_max = volt; v_min = volt; diff --git a/client/src/cmdhw.c b/client/src/cmdhw.c index 772d0e47f..4543496c2 100644 --- a/client/src/cmdhw.c +++ b/client/src/cmdhw.c @@ -36,6 +36,7 @@ #include "ui.h" #include "fpga.h" #include "cmdhw.h" +#include "cmdfpga.h" #include "cmddata.h" #include "commonutil.h" #include "preferences.h" @@ -1701,6 +1702,215 @@ int set_fpga_mode(uint8_t mode) { return resp.status; } +static int CmdPM5Ant(const char *Cmd) { + + CLIParserContext *ctx; + CLIParserInit(&ctx, "hw ant_pm5", + "Control the antennal of pm5", + "hw ant_pm5 --set -> Write the data of IO data register\n" + "hw ant_pm5 -m --set -> Write the data of IO map register\n" + ); + + void *argtable[] = { + arg_param_begin, + arg_lit0("m", "map", "Write the IO map register"), + arg_u64_0("s", "set", "", "Set PM5 antenna"), + arg_param_end + }; + CLIExecWithReturn(ctx, Cmd, argtable, true); + bool rw_map = arg_get_lit(ctx, 1); + uint64_t io = arg_get_u64_def(ctx, 2, -1); + CLIParserFree(ctx); + + PacketResponseNG resp; + + // Read the current value of the register before writing + struct { + uint8_t reg_type; // 0 is io reg, 1 is map reg. + } PACKED payload_read = { + .reg_type = rw_map ? 1 : 0, + }; + clearCommandBuffer(); + SendCommandNG(CMD_ANT_CONTROL_READ, (uint8_t*)&payload_read, sizeof(payload_read)); + if (WaitForResponseTimeout(CMD_ANT_CONTROL_READ, &resp, 1000) == false) { + PrintAndLogEx(WARNING, "command execution time out"); + return PM3_ETIMEOUT; + } + if (resp.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "failed to read PM5 antenna register"); + return resp.status; + } + PrintAndLogEx(INFO, "PM5 antenna register read: 0x%02X", resp.data.asBytes[0]); + + // Write the new value to the register(If need) + if (io != (uint64_t)-1) { + struct { + uint8_t data; + uint8_t reg_type; // 0 is io reg, 1 is map reg. + } PACKED payload_write = { + .reg_type = rw_map ? 1 : 0, + .data = io & 0xFF, + }; + clearCommandBuffer(); + SendCommandNG(CMD_ANT_CONTROL_WRITE, (uint8_t*)&payload_write, sizeof(payload_write)); + if (WaitForResponseTimeout(CMD_ANT_CONTROL_WRITE, &resp, 1000) == false) { + PrintAndLogEx(WARNING, "command execution time out"); + return PM3_ETIMEOUT; + } + if (resp.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "failed to write PM5 antenna register"); + return resp.status; + } + PrintAndLogEx(INFO, "PM5 antenna register written: 0x%02X", payload_write.data); + } + + return PM3_SUCCESS; +} + +static int CmdDeviceFactoryData(const char *Cmd) { + CLIParserContext *ctx; + CLIParserInit(&ctx, "hw factorydata", + "Get/Set the factory data for Device", + "hw factorydata --load -> Write the factory data to device from file\n" + "hw factorydata -> Read and parse the factory data from device\n" + ); + + void *argtable[] = { + arg_param_begin, + arg_str0(NULL, "load", "", "Load factory data from file to device"), + arg_param_end + }; + + CLIExecWithReturn(ctx, Cmd, argtable, true); + + int fnlen = 0; + char filename[FILE_PATH_SIZE] = {0}; + CLIParamStrToBuf(arg_get_str(ctx, 1), (uint8_t *)filename, FILE_PATH_SIZE, &fnlen); + + CLIParserFree(ctx); + + // Read the factory data from device + clearCommandBuffer(); + SendCommandNG(CMD_EEPROM_FACTORY_INFO_READ, NULL, 0); + PacketResponseNG resp; + if (WaitForResponseTimeout(CMD_EEPROM_FACTORY_INFO_READ, &resp, 1000) == false) { + PrintAndLogEx(WARNING, "command execution time out"); + return PM3_ETIMEOUT; + } + if (resp.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "failed to read factory data, maybe eeprom unavailable."); + return resp.status; + } + // Parse the factory data + if (resp.length) { + proxmark5_factory_info_v1_t *factory = (proxmark5_factory_info_v1_t *)resp.data.asBytes; + PrintAndLogEx(INFO, "Factory data read from device:"); + PrintAndLogEx(INFO, " - Data raw(hex) : 0x%s", sprint_hex_inrow(resp.data.asBytes, resp.length)); + PrintAndLogEx(INFO, " - Version : %d", factory->factory_info_version); + PrintAndLogEx(INFO, " - Signature : %s", + sprint_hex_inrow(factory->ecdsa_secp256k1_signature, sizeof(factory->ecdsa_secp256k1_signature))); + PrintAndLogEx(INFO, " - Timestamp : %" PRIu64, factory->info.unix_timestamp); + PrintAndLogEx(INFO, " - Chip Unique ID : %s", + sprint_hex_inrow(factory->info.chip_unique_id, sizeof(factory->info.chip_unique_id))); + PrintAndLogEx(INFO, " - Production ID : %" PRIu32, factory->info.production_id); + PrintAndLogEx(INFO, " - Hardware Version : %" PRIu32, factory->info.hardware_version); + PrintAndLogEx(INFO, " - AES key : %s", + sprint_hex_inrow(factory->info.aes_key, sizeof(factory->info.aes_key))); + } + + // If data is provided, it needs to be written + if (fnlen) { + // Load the file content into data buffer + uint8_t *data = NULL; + size_t datalen = 0; + int res = loadFile_safe(filename, ".bin", (void **)&data, &datalen); + if (res != PM3_SUCCESS) { + free(data); + return PM3_EFILE; + } + + if (datalen != resp.length) { + PrintAndLogEx(WARNING, _RED_("The length of the data to write (%d) does not match the length " + "of the factory data read from device (%d)."), datalen, resp.length); + free(data); + return PM3_EINVARG; + } + // Write the data to the device + clearCommandBuffer(); + SendCommandNG(CMD_EEPROM_FACTORY_INFO_WRITE, data, datalen); + PacketResponseNG resp_write; + if (WaitForResponseTimeout(CMD_EEPROM_FACTORY_INFO_WRITE, &resp_write, 1000) == false) { + PrintAndLogEx(WARNING, "command execution time out"); + free(data); + return PM3_ETIMEOUT; + } + if (resp_write.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "failed to write factory data, maybe eeprom unavailable."); + free(data); + return resp_write.status; + } + // Verify the data write + clearCommandBuffer(); + SendCommandNG(CMD_EEPROM_FACTORY_INFO_READ, NULL, 0); + if (WaitForResponseTimeout(CMD_EEPROM_FACTORY_INFO_READ, &resp, 1000) == false) { + PrintAndLogEx(WARNING, "command execution time out"); + free(data); + return PM3_ETIMEOUT; + } + if (resp.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "failed to read factory data after write, maybe eeprom unavailable."); + free(data); + return resp.status; + } + bool verify_result = false; + if (resp.length == datalen) { + verify_result = memcmp(resp.data.asBytes, data, datalen) == 0; + } + if (verify_result) { + PrintAndLogEx(SUCCESS, "Factory data written and verified successfully."); + } else { + PrintAndLogEx(ERR, "Factory data verification failed after write."); + free(data); + return PM3_EFAILED; + } + free(data); + } + + return PM3_SUCCESS; +} + +static int CmdPM5QCTest(const char *Cmd) { + + CLIParserContext *ctx; + CLIParserInit(&ctx, "hw qcpm5", "QC Test for the PM5", "hf qcpm5"); + + void *argtable[] = { + arg_param_begin, + arg_param_end + }; + CLIExecWithReturn(ctx, Cmd, argtable, true); + CLIParserFree(ctx); + + PrintAndLogEx(INFO, "Performing QC test for the PM5..."); + + clearCommandBuffer(); + SendCommandNG(CMD_PM5_QC_TEST, NULL, 0); + + PacketResponseNG resp; + if (WaitForResponseTimeout(CMD_PM5_QC_TEST, &resp, 20 * 1000) == false) { + SendCommandNG(CMD_BREAK_LOOP, NULL, 0); + PrintAndLogEx(WARNING, "command execution time out"); + return PM3_ETIMEOUT; + } + + if (resp.status != PM3_SUCCESS) { + PrintAndLogEx(ERR, "failed to perform QC test on PM5, failed item: %d", resp.data.asBytes[0]); + return resp.status; + } + PrintAndLogEx(INFO, "PM5 QC test successful."); + return PM3_SUCCESS; +} + static command_t CommandTable[] = { {"help", CmdHelp, AlwaysAvailable, "This help"}, {"-------------", CmdHelp, AlwaysAvailable, "----------------------- " _CYAN_("Operation") " -----------------------"}, @@ -1714,7 +1924,11 @@ static command_t CommandTable[] = { {"bootloader", CmdBootloader, IfPm3Present, "Reboot into bootloader mode"}, {"connect", CmdConnect, AlwaysAvailable, "Connect to the device via serial port"}, {"dbg", CmdDbg, IfPm3Present, "Set device side debug level"}, + {"fpga", CmdFPGA, IfPm3Present, "Fpga commands"}, {"fpgaoff", CmdFPGAOff, IfPm3Present, "Turn off FPGA on device"}, + {"ant_pm5", CmdPM5Ant, IfPm3Present, "Control the antennal of pm5"}, + {"qc_pm5", CmdPM5QCTest, IfPm3Present, "Perform QC test for the PM5"}, + {"factorydata", CmdDeviceFactoryData,IfPm3Present, "Get/Set the factory data for Device"}, {"lcd", CmdLCD, IfPm3Lcd, "Send command/data to LCD"}, {"lcdreset", CmdLCDReset, IfPm3Lcd, "Hardware reset LCD"}, {"ping", CmdPing, IfPm3Present, "Test if the Proxmark3 is responsive"}, @@ -2021,6 +2235,17 @@ void pm3_version(bool verbose, bool oneliner) { } lookupChipID(payload->id, payload->section_size); + + // Get unique id of mainchip + clearCommandBuffer(); + SendCommandNG(CMD_MAIN_CHIP_UNIQUEID, NULL, 0); + if (WaitForResponseTimeout(CMD_MAIN_CHIP_UNIQUEID, &resp, 1000)) { + if (resp.length) { // Some processor maybe no unique id. + char* uniqueid_hex = sprint_hex_inrow(resp.data.asBytes, resp.length); + PrintAndLogEx(NORMAL, " --= Processor Unique ID: " _YELLOW_("0x%s"), uniqueid_hex); + } + } + if (armsrc_mismatch) { PrintAndLogEx(NORMAL, ""); PrintAndLogEx(WARNING, _RED_("ARM firmware does not match the source at the time the client was compiled")); From d2a2d63854b96ca266c40583970c86e59434050a Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Fri, 7 Aug 2026 13:07:17 +0200 Subject: [PATCH 22/43] Fix CodeQL warning on printf --- client/src/cmdhw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/client/src/cmdhw.c b/client/src/cmdhw.c index 4543496c2..0d5747681 100644 --- a/client/src/cmdhw.c +++ b/client/src/cmdhw.c @@ -1830,8 +1830,8 @@ static int CmdDeviceFactoryData(const char *Cmd) { } if (datalen != resp.length) { - PrintAndLogEx(WARNING, _RED_("The length of the data to write (%d) does not match the length " - "of the factory data read from device (%d)."), datalen, resp.length); + PrintAndLogEx(WARNING, _RED_("The length of the data to write (%zu) does not match the length " + "of the factory data read from device (%u)."), datalen, (unsigned int)resp.length); free(data); return PM3_EINVARG; } From 436bbed4a2571f92cfec882d1f135b561daab3f6 Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Tue, 18 Aug 2026 18:37:01 +0200 Subject: [PATCH 23/43] Add placeholder for CMD_MAIN_CHIP_UNIQUEID --- armsrc/appmain.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/armsrc/appmain.c b/armsrc/appmain.c index d870f71ab..c6d03b6c7 100644 --- a/armsrc/appmain.c +++ b/armsrc/appmain.c @@ -3306,6 +3306,13 @@ static void PacketReceived(PacketCommandNG *packet) { reply_old(CMD_DEVICE_INFO, dev_info, 0, 0, 0, 0); break; } + case CMD_MAIN_CHIP_UNIQUEID: { + // PM3 placeholder, to be replaced when correct commit gets merged + uint8_t size = 0; + uint8_t* uid = NULL; + reply_ng(CMD_MAIN_CHIP_UNIQUEID, PM3_SUCCESS, uid, size); + break; + } default: { Dbprintf("%s: 0x%04x", "unknown command:", packet->cmd); break; From c56497a629afe60ae8e7b7df76e0c6b4a9ad74a2 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 15:45:49 +0800 Subject: [PATCH 24/43] Supplement logic comments to avoid misleading developers. --- client/src/cmdlfem4x05.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/client/src/cmdlfem4x05.c b/client/src/cmdlfem4x05.c index a40873519..9a14ecc3a 100644 --- a/client/src/cmdlfem4x05.c +++ b/client/src/cmdlfem4x05.c @@ -200,7 +200,8 @@ static int doPreambleSearch(size_t *startIdx) { size_t size = (11 > g_DemodBufferLen) ? g_DemodBufferLen : 11; *startIdx = 0; - // skip first two 0 bits as they might have been missed in the demod + // A long time ago, the first two zeros of the preamble were skipped + // because previous decoders had a probability of missing the first part of the data. uint8_t preamble[EM_PREAMBLE_LEN] = {0, 0, 0, 0, 1, 0, 1, 0}; if (!preambleSearchEx(g_DemodBuffer, preamble, EM_PREAMBLE_LEN, &size, startIdx, true)) { From 69c5db7487e68be68969eebb229cfd8ee2f29fe5 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 15:57:34 +0800 Subject: [PATCH 25/43] Make VERSION_INFORMATION_MAGIC cross-platform. --- include/common.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/include/common.h b/include/common.h index 392f5aad1..e2899e2fd 100644 --- a/include/common.h +++ b/include/common.h @@ -52,7 +52,19 @@ #define PACKED __attribute__((packed)) -#define VERSION_INFORMATION_MAGIC 0x56334d50 // "PM3V" +typedef enum { + MAIN_CHIP_TYPE_AT91 = 0, // -> PM3V + MAIN_CHIP_TYPE_AT32 = 1, // -> PM5V + MAIN_CHIP_TYPE_NONE = INT32_MAX, +} main_chip_type_t; + +#define VERSION_INFORMATION_MAGIC_PM5V 0x56354d50 // "PM5V" +#define VERSION_INFORMATION_MAGIC_PM3V 0x56334d50 // "PM3V +#ifdef PM5 +#define VERSION_INFORMATION_MAGIC VERSION_INFORMATION_MAGIC_PM5V +#else +#define VERSION_INFORMATION_MAGIC VERSION_INFORMATION_MAGIC_PM3V +#endif struct version_information_t { int magic; /* Magic sequence to identify this as a correct version information structure. Must be VERSION_INFORMATION_MAGIC */ char versionversion; /* Must be 1 */ From c3df8e705d2f8222477899c2eb6bd58bd5cf2400 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 15:55:38 +0800 Subject: [PATCH 26/43] Added def: FORCE_INLINE & STATIC_FORCE_INLINE --- include/common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/common.h b/include/common.h index e2899e2fd..b138fb953 100644 --- a/include/common.h +++ b/include/common.h @@ -51,6 +51,8 @@ #define FULLIMAGE_SUBDIR "armsrc" PATHSEP "obj" PATHSEP #define PACKED __attribute__((packed)) +#define FORCE_INLINE inline __attribute__((always_inline)) +#define STATIC_FORCE_INLINE static inline __attribute__((always_inline)) typedef enum { MAIN_CHIP_TYPE_AT91 = 0, // -> PM3V From 516ef68ba6e5d6bb8e1dace021c38ec5841e5f1e Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 15:55:00 +0800 Subject: [PATCH 27/43] Fixed bug for RAMFUNC definition --- include/common.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/common.h b/include/common.h index b138fb953..4d68b066a 100644 --- a/include/common.h +++ b/include/common.h @@ -106,7 +106,14 @@ extern bool g_tearoff_enabled; //#define RAMFUNC __attribute((long_call, section(".ramfunc"))) +// PM5 is at32f435 of CM4 kernal, not at91sam7s arm7, so PM5 unsupported 'arm' old instruction sets. +// about diff see: https://community.arm.com/support-forums/f/architectures-and-processors-forum/5814/what-is-difference-between-arm7-and-arm-cortex-m-series +// if you use '__attribute__((target("arm")))' for CM4 kernal, will error when compile(error: target CPU does not support ARM mode) +#ifdef PM5 +#define RAMFUNC __attribute((section(".ramfunc"))) __attribute__((noinline)) +#else #define RAMFUNC __attribute((long_call, section(".ramfunc"))) __attribute__((target("arm"))) __attribute__((noinline)) +#endif #ifndef PM3_ROTR # define PM3_ROTR(x,n) (((uintmax_t)(x) >> (n)) | ((uintmax_t)(x) << ((sizeof(x) * 8) - (n)))) From 9cdda9aa629e18730ff6812dc54b5eba089da4db Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 15:51:39 +0800 Subject: [PATCH 28/43] Reuse the logic for checking version information. --- common/commonutil.c | 44 ++++++++++++++++++++++++++++++++++++++++++-- common/commonutil.h | 2 ++ 2 files changed, 44 insertions(+), 2 deletions(-) diff --git a/common/commonutil.c b/common/commonutil.c index ff0782514..4c15f0293 100644 --- a/common/commonutil.c +++ b/common/commonutil.c @@ -16,9 +16,47 @@ // Utility functions used in many places, not specific to any piece of code. //----------------------------------------------------------------------------- #include "commonutil.h" +#include "pm3_cmd.h" #include #include "stdbool.h" +// Specific firmware versions correspond to specific main chip types. +struct version_info_map_chip_type { + int magic; + uint32_t chiptype; +} map[] = { + {VERSION_INFORMATION_MAGIC_PM5V, MAIN_CHIP_TYPE_AT32}, + {VERSION_INFORMATION_MAGIC_PM3V, MAIN_CHIP_TYPE_AT91}, +}; + +/** + * Check version information is valid + * @param version_info pointer to the struct version_information_t + * @return true is valid, false is invalid. + */ +bool CheckValidInformationMagic(const void *version_info) { + const struct version_information_t *v = (const struct version_information_t *)version_info; + for (int i = 0; i < ARRAYLEN(map); ++i) { + if (v->magic == map[i].magic) { + return true; // Valid magic found. + } + } + return false; +} + +bool CheckInformationMagicAndChipType(const void *version_info, uint32_t chiptype) { + const struct version_information_t *v = (const struct version_information_t *) version_info; + for (int i = 0; i < ARRAYLEN(map); ++i) { + if (v->magic == map[i].magic) { + if (chiptype == map[i].chiptype) { + return true; + } + return false; // Magic matches but chip type does not match. + } + } + return false; // No valid magic found. +} + /* Similar to FpgaGatherVersion this formats stored version information * into a string representation. It takes a pointer to the struct version_information_t, * verifies the magic properties, then stores a formatted string, prefixed by @@ -28,7 +66,8 @@ void FormatVersionInformation(char *dst, int len, const char *prefix, const void const struct version_information_t *v = (const struct version_information_t *)version_info; dst[0] = 0; strncat(dst, prefix, len - 1); - if (v->magic != VERSION_INFORMATION_MAGIC) { + + if (!CheckValidInformationMagic(version_info)) { strncat(dst, "Missing/Invalid version information", len - strlen(dst) - 1); return; } @@ -57,7 +96,8 @@ void FormatVersionInformation(char *dst, int len, const char *prefix, const void void format_version_information_short(char *dst, int len, const void *version_info) { const struct version_information_t *v = (const struct version_information_t *)version_info; dst[0] = 0; - if (v->magic != VERSION_INFORMATION_MAGIC) { + + if (!CheckValidInformationMagic(version_info)) { strncat(dst, "Missing/Invalid version information", len - strlen(dst) - 1); return; } diff --git a/common/commonutil.h b/common/commonutil.h index bb4697ffa..5f49f3741 100644 --- a/common/commonutil.h +++ b/common/commonutil.h @@ -80,6 +80,8 @@ void add_hours(Date_t *d, int hours_to_add); void add_days(Date_t *d, int days_to_add); uint8_t days_in_month(int year, int month); +bool CheckValidInformationMagic(const void *version_info); +bool CheckInformationMagicAndChipType(const void *version_info, uint32_t chiptype); extern struct version_information_t g_version_information; void FormatVersionInformation(char *dst, int len, const char *prefix, const void *version_info); From af9f16d8801a896685934396249fce9bfd843544 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Mon, 3 Aug 2026 22:22:58 +0800 Subject: [PATCH 29/43] Fixed unintended global export in commonutil.c, thx nieldk. --- common/commonutil.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/common/commonutil.c b/common/commonutil.c index 4c15f0293..5ee17d552 100644 --- a/common/commonutil.c +++ b/common/commonutil.c @@ -21,12 +21,14 @@ #include "stdbool.h" // Specific firmware versions correspond to specific main chip types. -struct version_info_map_chip_type { +typedef struct { int magic; uint32_t chiptype; -} map[] = { - {VERSION_INFORMATION_MAGIC_PM5V, MAIN_CHIP_TYPE_AT32}, - {VERSION_INFORMATION_MAGIC_PM3V, MAIN_CHIP_TYPE_AT91}, +} version_info_map_chip_type_t; + +static version_info_map_chip_type_t g_version_info_map[] = { + {.magic = VERSION_INFORMATION_MAGIC_PM5V, .chiptype = MAIN_CHIP_TYPE_AT32}, + {.magic = VERSION_INFORMATION_MAGIC_PM3V, .chiptype = MAIN_CHIP_TYPE_AT91}, }; /** @@ -36,8 +38,8 @@ struct version_info_map_chip_type { */ bool CheckValidInformationMagic(const void *version_info) { const struct version_information_t *v = (const struct version_information_t *)version_info; - for (int i = 0; i < ARRAYLEN(map); ++i) { - if (v->magic == map[i].magic) { + for (int i = 0; i < ARRAYLEN(g_version_info_map); ++i) { + if (v->magic == g_version_info_map[i].magic) { return true; // Valid magic found. } } @@ -46,9 +48,9 @@ bool CheckValidInformationMagic(const void *version_info) { bool CheckInformationMagicAndChipType(const void *version_info, uint32_t chiptype) { const struct version_information_t *v = (const struct version_information_t *) version_info; - for (int i = 0; i < ARRAYLEN(map); ++i) { - if (v->magic == map[i].magic) { - if (chiptype == map[i].chiptype) { + for (int i = 0; i < ARRAYLEN(g_version_info_map); ++i) { + if (v->magic == g_version_info_map[i].magic) { + if (chiptype == g_version_info_map[i].chiptype) { return true; } return false; // Magic matches but chip type does not match. From 7bb46ff71e85c03b74fb5aae1d990eff89ecbd17 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 16:00:22 +0800 Subject: [PATCH 30/43] Separate the GPIO definitions of different platforms. --- include/config_gpio.h | 76 ++++++------------ include/config_gpio_proxmark3.h | 81 +++++++++++++++++++ include/config_gpio_proxmark5.h | 133 ++++++++++++++++++++++++++++++++ 3 files changed, 237 insertions(+), 53 deletions(-) create mode 100644 include/config_gpio_proxmark3.h create mode 100644 include/config_gpio_proxmark5.h diff --git a/include/config_gpio.h b/include/config_gpio.h index fecf99526..09155ee2d 100644 --- a/include/config_gpio.h +++ b/include/config_gpio.h @@ -13,63 +13,33 @@ // // See LICENSE.txt for the text of the license. //----------------------------------------------------------------------------- -// GPIO pin mapping for the Proxmark3 +// GPIO pin mapping for the Proxmark[?] //----------------------------------------------------------------------------- -#ifndef __CONFIG_GPIO_H -#define __CONFIG_GPIO_H +#ifndef CONFIG_GPIO_H_ +#define CONFIG_GPIO_H_ -#define GPIO_LED_A AT91C_PIO_PA0 -#define GPIO_PA1 AT91C_PIO_PA1 -#ifndef LED_ORDER_PM3EASY -#define GPIO_LED_D AT91C_PIO_PA2 +// Select a GPIO map config for building device. + +/** + * TODO DXL: + * After the complete migration, please select different GPIO configurations according to the compilation target, + * and do not include all of them! + */ + +#ifdef PM5 +#include "config_gpio_proxmark5.h" +#endif +#include "config_gpio_proxmark3.h" // TODO DXL: For test... include it. + +/* + +#ifdef PM5 +#include "config_gpio_proxmark5.h" #else -#define GPIO_LED_B AT91C_PIO_PA2 +#include "config_gpio_proxmark3.h" #endif -#define GPIO_NVDD_ON AT91C_PIO_PA3 -#define GPIO_FPGA_NINIT AT91C_PIO_PA4 -#define GPIO_PA5 AT91C_PIO_PA5 -#define GPIO_PCK0 AT91C_PA6_PCK0 -#define GPIO_LRST AT91C_PIO_PA7 -#ifndef LED_ORDER_PM3EASY -#define GPIO_LED_B AT91C_PIO_PA8 -#else -#define GPIO_LED_D AT91C_PIO_PA8 -#endif -#define GPIO_LED_C AT91C_PIO_PA9 -// defines for flash mem, or rdv40 ? -// flashmem hooked on PA10 -//#define GPIO_NCS2 AT91C_PIO_PA1 -#define GPIO_NCS2 AT91C_PA10_NPCS2 -#define GPIO_NCS0 AT91C_PA11_NPCS0 +*/ -#define GPIO_MISO AT91C_PA12_MISO -#define GPIO_MOSI AT91C_PA13_MOSI -#define GPIO_SPCK AT91C_PA14_SPCK -#define GPIO_SSC_FRAME AT91C_PA15_TF -#define GPIO_SSC_CLK AT91C_PA16_TK -#define GPIO_SSC_DOUT AT91C_PA17_TD -#define GPIO_SSC_DIN AT91C_PA18_RD -#define GPIO_MUXSEL_HIPKD AT91C_PIO_PA19 -#define GPIO_MUXSEL_LOPKD AT91C_PIO_PA20 - -// RDV40 has no HIRAW/LORAW, its used for FPC -#define GPIO_MUXSEL_HIRAW AT91C_PIO_PA21 -#define GPIO_MUXSEL_LORAW AT91C_PIO_PA22 - -#define GPIO_BUTTON AT91C_PIO_PA23 -#define GPIO_USB_PU AT91C_PIO_PA24 -#define GPIO_RELAY AT91C_PIO_PA25 -#if defined XC3 -#define GPIO_FPGA_SWITCH AT91C_PIO_PA26 -#else -#define GPIO_FPGA_ON AT91C_PIO_PA26 -#endif -#define GPIO_FPGA_DONE AT91C_PIO_PA27 -#define GPIO_FPGA_NPROGRAM AT91C_PIO_PA28 -#define GPIO_FPGA_CCLK AT91C_PIO_PA29 -#define GPIO_FPGA_DIN AT91C_PIO_PA30 -#define GPIO_FPGA_DOUT AT91C_PIO_PA31 - -#endif +#endif // CONFIG_GPIO_H_ diff --git a/include/config_gpio_proxmark3.h b/include/config_gpio_proxmark3.h new file mode 100644 index 000000000..a89f472a3 --- /dev/null +++ b/include/config_gpio_proxmark3.h @@ -0,0 +1,81 @@ +//----------------------------------------------------------------------------- +// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details. +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// See LICENSE.txt for the text of the license. +//----------------------------------------------------------------------------- +// GPIO pin mapping for the Proxmark3 +//----------------------------------------------------------------------------- + +#ifndef CONFIG_GPIO_PROXMARK3_H_ +#define CONFIG_GPIO_PROXMARK3_H_ + +#include "at91sam7s512.h" + +#define GPIO_LED_A AT91C_PIO_PA0 +#ifndef LED_ORDER_PM3EASY +#define GPIO_LED_D AT91C_PIO_PA2 +#else +#define GPIO_LED_B AT91C_PIO_PA2 +#endif +#define GPIO_NVDD_ON AT91C_PIO_PA3 +#define GPIO_FPGA_NINIT AT91C_PIO_PA4 +#define GPIO_PA5 AT91C_PIO_PA5 +#define GPIO_PCK0 AT91C_PA6_PCK0 +#define GPIO_LRST AT91C_PIO_PA7 +#ifndef LED_ORDER_PM3EASY +#define GPIO_LED_B AT91C_PIO_PA8 +#else +#define GPIO_LED_D AT91C_PIO_PA8 +#endif +#define GPIO_LED_C AT91C_PIO_PA9 + +// defines for i2c, moved from 'i2c.c' to here. +#define GPIO_I2C_RST AT91C_PIO_PA1 +#define GPIO_I2C_SCL AT91C_PIO_PA5 +#define GPIO_I2C_SDA AT91C_PIO_PA7 + +// defines for flash mem, or rdv40 ? +// flashmem hooked on PA10 +//#define GPIO_NCS2 AT91C_PIO_PA1 +#define GPIO_NCS2 AT91C_PA10_NPCS2 +#define GPIO_NCS0 AT91C_PA11_NPCS0 + +#define GPIO_MISO AT91C_PA12_MISO +#define GPIO_MOSI AT91C_PA13_MOSI +#define GPIO_SPCK AT91C_PA14_SPCK +#define GPIO_SSC_FRAME AT91C_PA15_TF +#define GPIO_SSC_CLK AT91C_PA16_TK +#define GPIO_SSC_DOUT AT91C_PA17_TD +#define GPIO_SSC_DIN AT91C_PA18_RD +#define GPIO_MUXSEL_HIPKD AT91C_PIO_PA19 +#define GPIO_MUXSEL_LOPKD AT91C_PIO_PA20 + +// RDV40 has no HIRAW/LORAW, its used for FPC +#define GPIO_MUXSEL_HIRAW AT91C_PIO_PA21 +#define GPIO_MUXSEL_LORAW AT91C_PIO_PA22 + +#define GPIO_BUTTON AT91C_PIO_PA23 +#define GPIO_USB_PU AT91C_PIO_PA24 +#define GPIO_RELAY AT91C_PIO_PA25 +#if defined XC3 +#define GPIO_FPGA_SWITCH AT91C_PIO_PA26 +#else +#define GPIO_FPGA_ON AT91C_PIO_PA26 +#endif +#define GPIO_FPGA_DONE AT91C_PIO_PA27 +#define GPIO_FPGA_NPROGRAM AT91C_PIO_PA28 +#define GPIO_FPGA_CCLK AT91C_PIO_PA29 +#define GPIO_FPGA_DIN AT91C_PIO_PA30 +#define GPIO_FPGA_DOUT AT91C_PIO_PA31 + +#endif // CONFIG_GPIO_PROXMARK3_H_ diff --git a/include/config_gpio_proxmark5.h b/include/config_gpio_proxmark5.h new file mode 100644 index 000000000..87ab61613 --- /dev/null +++ b/include/config_gpio_proxmark5.h @@ -0,0 +1,133 @@ +//----------------------------------------------------------------------------- +// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details. +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// See LICENSE.txt for the text of the license. +//----------------------------------------------------------------------------- +// GPIO pin mapping for the Proxmark5 +//----------------------------------------------------------------------------- + +#ifndef CONFIG_GPIO_PROXMARK5_H_ +#define CONFIG_GPIO_PROXMARK5_H_ + +#include "at32f435_437_crm.h" +#include "at32f435_437_gpio.h" + +// leds +#define AT32_GPIO_LED_CLK CRM_GPIOC_PERIPH_CLOCK +#define AT32_GPIO_LED GPIOC +#define AT32_GPIO_LEDA_PIN GPIO_PINS_3 +#define AT32_GPIO_LEDB_PIN GPIO_PINS_15 +#define AT32_GPIO_LEDC_PIN GPIO_PINS_14 +#define AT32_GPIO_LEDD_PIN GPIO_PINS_13 +// button +#define AT32_GPIO_BTN_CLK CRM_GPIOB_PERIPH_CLOCK +#define AT32_GPIO_BTN GPIOB +#define AT32_GPIO_BTN_PIN GPIO_PINS_12 +// qspi flash +#define AT32_GPIO_PERIPH_QSPI_FLASH_CLK CRM_GPIOB_PERIPH_CLOCK,CRM_GPIOC_PERIPH_CLOCK,CRM_GPIOH_PERIPH_CLOCK +#define AT32_GPIO_QSPI_FLASH_IO0 GPIOB // <-- +#define AT32_GPIO_QSPI_FLASH_IO0_SOURCE GPIO_PINS_SOURCE11 +#define AT32_GPIO_QSPI_FLASH_IO0_MUX GPIO_MUX_10 +#define AT32_GPIO_QSPI_FLASH_IO0_PIN GPIO_PINS_11 // PB11_QSPI1_IO0 +#define AT32_GPIO_QSPI_FLASH_IO1 GPIOH // <-- +#define AT32_GPIO_QSPI_FLASH_IO1_SOURCE GPIO_PINS_SOURCE3 +#define AT32_GPIO_QSPI_FLASH_IO1_MUX GPIO_MUX_10 +#define AT32_GPIO_QSPI_FLASH_IO1_PIN GPIO_PINS_3 // PH3_QSPI1_IO1 +#define AT32_GPIO_QSPI_FLASH_IO2 GPIOC // <-- +#define AT32_GPIO_QSPI_FLASH_IO2_SOURCE GPIO_PINS_SOURCE4 +#define AT32_GPIO_QSPI_FLASH_IO2_MUX GPIO_MUX_10 +#define AT32_GPIO_QSPI_FLASH_IO2_PIN GPIO_PINS_4 // PC4_QSPI1_IO2 +#define AT32_GPIO_QSPI_FLASH_IO3 GPIOC // <-- +#define AT32_GPIO_QSPI_FLASH_IO3_SOURCE GPIO_PINS_SOURCE5 +#define AT32_GPIO_QSPI_FLASH_IO3_MUX GPIO_MUX_10 +#define AT32_GPIO_QSPI_FLASH_IO3_PIN GPIO_PINS_5 // PC5_QSPI1_IO3 +#define AT32_GPIO_QSPI_FLASH_SCK GPIOB // <-- +#define AT32_GPIO_QSPI_FLASH_SCK_SOURCE GPIO_PINS_SOURCE1 +#define AT32_GPIO_QSPI_FLASH_SCK_MUX GPIO_MUX_9 +#define AT32_GPIO_QSPI_FLASH_SCK_PIN GPIO_PINS_1 // PB1_QSPI1_SCK +#define AT32_GPIO_QSPI_FLASH_CS GPIOB // <-- +#define AT32_GPIO_QSPI_FLASH_CS_SOURCE GPIO_PINS_SOURCE10 +#define AT32_GPIO_QSPI_FLASH_CS_MUX GPIO_MUX_9 +#define AT32_GPIO_QSPI_FLASH_CS_PIN GPIO_PINS_10 // PB10_QSPI1_CS +// fpga 24m clock +#define AT32_GPIO_PERIPH_FPGA_24M_CLK CRM_GPIOA_PERIPH_CLOCK +#define AT32_GPIO_FPGA_24M_CLK GPIOA +#define AT32_GPIO_FPGA_24M_CLK_PIN GPIO_PINS_8 +// fpga switch +#define AT32_GPIO_FPGA_SWITCH_CLK CRM_GPIOB_PERIPH_CLOCK +#define AT32_GPIO_FPGA_SWITCH GPIOB +#define AT32_GPIO_FPGA_SWITCH_PIN GPIO_PINS_5 +// fpga ssc(spi ti_mode) +#define AT32_GPIO_PERIPH_SSC_CLK CRM_GPIOB_PERIPH_CLOCK +#define AT32_GPIO_SSC_DIN GPIOB // <-- +#define AT32_GPIO_SSC_DIN_SOURCE GPIO_PINS_SOURCE9 +#define AT32_GPIO_SSC_DIN_MUX GPIO_MUX_6 +#define AT32_GPIO_SSC_DIN_PIN GPIO_PINS_9 // PB9_SPI4_MOSI +#define AT32_GPIO_SSC_DOUT GPIOB // <-- +#define AT32_GPIO_SSC_DOUT_SOURCE GPIO_PINS_SOURCE8 +#define AT32_GPIO_SSC_DOUT_MUX GPIO_MUX_6 +#define AT32_GPIO_SSC_DOUT_PIN GPIO_PINS_8 // PB8_SPI4_MISO +#define AT32_GPIO_SSC_CLK GPIOB // <-- +#define AT32_GPIO_SSC_CLK_SOURCE GPIO_PINS_SOURCE7 +#define AT32_GPIO_SSC_CLK_MUX GPIO_MUX_6 +#define AT32_GPIO_SSC_CLK_PIN GPIO_PINS_7 // PB7_SPI4_SCK +#define AT32_GPIO_SSC_FRAME GPIOB // <-- +#define AT32_GPIO_SSC_FRAME_SOURCE GPIO_PINS_SOURCE6 +#define AT32_GPIO_SSC_FRAME_MUX GPIO_MUX_6 +#define AT32_GPIO_SSC_FRAME_PIN GPIO_PINS_6 // PB6_SPI4_CS +// fpga ssc clk counter +#define CRM_GPIO_PERIPH_COUNT_SSP_CLK CRM_GPIOB_PERIPH_CLOCK +#define CRM_GPIO_COUNT_SSP_CLK GPIOB +#define CRM_GPIO_COUNT_SSP_CLK_SOURCE GPIO_PINS_SOURCE3 +#define CRM_GPIO_COUNT_SSP_CLK_MUX GPIO_MUX_1 +#define CRM_GPIO_COUNT_SSP_CLK_PIN GPIO_PINS_3 +// fpga spi(for cmd) +#define AT32_GPIO_PERIPH_SPI_CLK CRM_GPIOC_PERIPH_CLOCK,CRM_GPIOA_PERIPH_CLOCK +#define AT32_GPIO_SPI_CS GPIOA // <-- +#define AT32_GPIO_SPI_CS_PIN GPIO_PINS_15 +#define AT32_GPIO_SPI_SCK GPIOC // <-- +#define AT32_GPIO_SPI_SCK_SOURCE GPIO_PINS_SOURCE10 +#define AT32_GPIO_SPI_SCK_MUX GPIO_MUX_6 +#define AT32_GPIO_SPI_SCK_PIN GPIO_PINS_10 +#define AT32_GPIO_SPI_MISO GPIOC // <-- +#define AT32_GPIO_SPI_MISO_SOURCE GPIO_PINS_SOURCE11 +#define AT32_GPIO_SPI_MISO_MUX GPIO_MUX_6 +#define AT32_GPIO_SPI_MISO_PIN GPIO_PINS_11 +#define AT32_GPIO_SPI_MOSI GPIOC // <-- +#define AT32_GPIO_SPI_MOSI_SOURCE GPIO_PINS_SOURCE12 +#define AT32_GPIO_SPI_MOSI_MUX GPIO_MUX_6 +#define AT32_GPIO_SPI_MOSI_PIN GPIO_PINS_12 +// adc rssi +#define AT32_GPIO_ADC_RSSI_CLK CRM_GPIOC_PERIPH_CLOCK +#define AT32_GPIO_ADC_RSSI GPIOC +#define AT32_GPIO_ADC_RSSI_LF_PIN GPIO_PINS_0 +#define AT32_GPIO_ADC_RSSI_HF_PIN GPIO_PINS_1 +// arm power lock +#define AT32_GPIO_ARM_POWER_LOCK_CLK CRM_GPIOB_PERIPH_CLOCK +#define AT32_GPIO_ARM_POWER_LOCK GPIOB +#define AT32_GPIO_ARM_POWER_LOCK_PIN GPIO_PINS_0 +// i2c software +#define AT32_GPIO_I2C_SW_CLK CRM_GPIOC_PERIPH_CLOCK +#define AT32_GPIO_I2C_SW GPIOC +#define AT32_GPIO_I2C_SCL_PIN GPIO_PINS_6 +#define AT32_GPIO_I2C_SDA_PIN GPIO_PINS_7 +// spi in inter-usb for switch master/slave +#define AT32_GPIO_INTER_USB_SPI_ROLE_CLK CRM_GPIOB_PERIPH_CLOCK +#define AT32_GPIO_INTER_USB_SPI_ROLE GPIOB +#define AT32_GPIO_INTER_USB_SPI_ROLE_PIN GPIO_PINS_2 +// vusb +#define AT32_GPIO_VUSB_CLK CRM_GPIOC_PERIPH_CLOCK +#define AT32_GPIO_VUSB GPIOC +#define AT32_GPIO_VUSB_PIN GPIO_PINS_2 + +#endif // CONFIG_GPIO_PROXMARK5_H_ From 389e052ba4bd0b0b2f3d964d71d83b7898593b82 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sun, 16 Aug 2026 01:31:41 +0800 Subject: [PATCH 31/43] Add the relevant IO definitions for capturing ssc_frames on PM5. --- include/config_gpio_proxmark5.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/config_gpio_proxmark5.h b/include/config_gpio_proxmark5.h index 87ab61613..0095eabc8 100644 --- a/include/config_gpio_proxmark5.h +++ b/include/config_gpio_proxmark5.h @@ -91,6 +91,12 @@ #define CRM_GPIO_COUNT_SSP_CLK_SOURCE GPIO_PINS_SOURCE3 #define CRM_GPIO_COUNT_SSP_CLK_MUX GPIO_MUX_1 #define CRM_GPIO_COUNT_SSP_CLK_PIN GPIO_PINS_3 +// fpga ssc frame input capture (LF tag modulation edges), PB4 = TMR3_CH1 +#define CRM_GPIO_PERIPH_INPUT_CAPTURE CRM_GPIOB_PERIPH_CLOCK +#define CRM_GPIO_INPUT_CAPTURE GPIOB +#define CRM_GPIO_INPUT_CAPTURE_SOURCE GPIO_PINS_SOURCE4 +#define CRM_GPIO_INPUT_CAPTURE_MUX GPIO_MUX_2 +#define CRM_GPIO_INPUT_CAPTURE_PIN GPIO_PINS_4 // fpga spi(for cmd) #define AT32_GPIO_PERIPH_SPI_CLK CRM_GPIOC_PERIPH_CLOCK,CRM_GPIOA_PERIPH_CLOCK #define AT32_GPIO_SPI_CS GPIOA // <-- From 66c5fd8343f435507abbe0364e491036ed3361f8 Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Tue, 18 Aug 2026 18:37:40 +0200 Subject: [PATCH 32/43] Fix external flash sanity check in prevision of pm5 --- client/src/cmddata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/client/src/cmddata.c b/client/src/cmddata.c index de406785f..795161717 100644 --- a/client/src/cmddata.c +++ b/client/src/cmddata.c @@ -2902,8 +2902,8 @@ static int CmdDiff(const char *Cmd) { CLIParserFree(ctx); // sanity check - if (IfPm3Rdv4Fw() == false && (splenA > 0 || splenB > 0)) { - PrintAndLogEx(WARNING, "No RDV4 Flashmemory available"); + if (IfPm3Flash() == false && (splenA > 0 || splenB > 0)) { + PrintAndLogEx(WARNING, "No Flashmemory available"); return PM3_EINVARG; } From defa6ca212ad70dda4d6445dad092e4728ed4185 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 8 Aug 2026 10:39:45 +0800 Subject: [PATCH 33/43] Fixed a bug that caused a stringop-overflow warning when compiling load.c. --- client/deps/jansson/load.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/client/deps/jansson/load.c b/client/deps/jansson/load.c index 8ff937f50..38595d11c 100644 --- a/client/deps/jansson/load.c +++ b/client/deps/jansson/load.c @@ -188,6 +188,9 @@ static int stream_get(stream_t *stream, json_error_t *error) { assert(count >= 2); assert(count <= 4); + if (count >= sizeof(stream->buffer)) + goto out; + // if count == 4 , i will become 5 and overflow. for (i = 1; i < count; i++) stream->buffer[i] = stream->get(stream->data); From 94e350fab98d7f2395a307f32d798e91fecfb88d Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 8 Aug 2026 12:10:26 +0800 Subject: [PATCH 34/43] Fixed a bug where Proxmark5 dump mfu data was empty. --- include/pm3_cmd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/pm3_cmd.h b/include/pm3_cmd.h index e3935726f..c18be6ca9 100644 --- a/include/pm3_cmd.h +++ b/include/pm3_cmd.h @@ -421,7 +421,7 @@ typedef struct { typedef struct { uint16_t bytelen; - uint16_t startidx; + uint32_t startidx; } PACKED mful_readblock_resp_t; typedef struct { From eaf9388b0edc7ffd80088eb9fbf0cdfc545955f9 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sat, 1 Aug 2026 16:12:42 +0800 Subject: [PATCH 35/43] Git does not manage project folders in IntelliJ IDEA. --- .gitignore | 3 +++ 1 file changed, 3 insertions(+) diff --git a/.gitignore b/.gitignore index 55166b371..f81d51807 100644 --- a/.gitignore +++ b/.gitignore @@ -121,6 +121,9 @@ fpga_version_info.c !.vscode/extensions.json !.vscode/tasks.json +# IDEA files +.idea/ + # docs !doc/*.json From 40ec760a92b1c735d91d0e0f60df4c10a04ae263 Mon Sep 17 00:00:00 2001 From: dxl <64101226@qq.com> Date: Sun, 2 Aug 2026 00:47:49 +0800 Subject: [PATCH 36/43] Strictly check the length of atqa. --- armsrc/iso14443a.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index 755f95d64..df4d73ea9 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -3277,6 +3277,11 @@ int GetATQA(uint8_t *resp, uint16_t resp_len, uint8_t *resp_par, const iso14a_po // Receive the ATQA len = ReaderReceive(resp, resp_len, resp_par); + // DXL: Check response length is not 2 and no collision, set len to 0 for skip this data + if (len != 2 && !Demod.collisionPos) { + len = 0; // maybe an incorrect data, discard it. + } + // We set the start_time here otherwise in some cases we miss the window and only ever try once if (first_try) { start_time = GetTickCount(); @@ -3324,6 +3329,21 @@ int iso14443a_select_cardEx(uint8_t *uid_ptr, iso14a_card_select_t *p_card, uint p_card->ats_len = 0; } + /* + * DXL: + * If the specifications of manual 14443-3 are strictly followed, ATQA should also participate in the anti-collision process. + * When encountering conflicts, it should directly enter the card selection stage of anti-collision. + * However, at present, all operations rely on the first ATQA request and do not follow ATQA's anti-collision standards. + * --- + * After testing, in some cases, the device may decode an incorrect/collision ATQA, + * and using this ATQA data for subsequent logical operations may result in unexpected things. + * Note: It is easier to reproduce this problem when placing the card from high to low for card reading. + * Invalid AQTA infos: length = 1, data = 0000, collision = 0 + * --- + * Therefore, I think the best solution is to consider ATQA invalid if there are no conflicts and the data length of ATQA is less than two bytes. + * In order to improve the stability of card reading as much as possible, + * I implemented this logic inside the GetATQA function. + */ if (GetATQA(resp, sizeof(resp), parity_array, polling_parameters) == 0) { return 0; } From 420e36968b5655d952d0a368caacc53a2a7888c4 Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Wed, 19 Aug 2026 10:23:56 +0200 Subject: [PATCH 37/43] cmdfpga: clear error msg --- client/src/cmdfpga.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/client/src/cmdfpga.c b/client/src/cmdfpga.c index dd2dba0da..62a47e220 100644 --- a/client/src/cmdfpga.c +++ b/client/src/cmdfpga.c @@ -71,6 +71,11 @@ static int CmdConfigFpga(const char *Cmd) { free(data); return PM3_ETIMEOUT; } + if (resp.status == PM3_ENOTIMPL) { + PrintAndLogEx(ERR, "Feature not implemented"); + free(data); + return resp.status; + } if (resp.status != PM3_SUCCESS) { PrintAndLogEx(ERR, "Failed to start FPGA configuration: %d", resp.status); free(data); From d2a8cca233fc1b3cae4ec137ad71555ca1be3cb8 Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Wed, 19 Aug 2026 11:41:30 +0200 Subject: [PATCH 38/43] Add pm5 capabilities --- armsrc/appmain.c | 12 ++++++++++++ client/src/cmdparser.c | 24 ++++++++++++++++++++++++ client/src/cmdparser.h | 4 ++++ include/pm3_cmd.h | 8 +++++++- 4 files changed, 47 insertions(+), 1 deletion(-) diff --git a/armsrc/appmain.c b/armsrc/appmain.c index c6d03b6c7..a37642b38 100644 --- a/armsrc/appmain.c +++ b/armsrc/appmain.c @@ -634,6 +634,18 @@ static void SendCapabilities(void) { capabilities.is_rdv4 = false; #endif +#ifdef PM5 + capabilities.is_pm5 = true; + capabilities.is_pm5_std_ant = true; + capabilities.hw_available_fpga_flash = true; + capabilities.hw_available_i2c_eeprom = true; +#else + capabilities.is_pm5 = false; + capabilities.is_pm5_std_ant = false; + capabilities.hw_available_fpga_flash = false; + capabilities.hw_available_i2c_eeprom = false; +#endif + #ifdef WITH_FLASH capabilities.compiled_with_flash = true; capabilities.hw_available_flash = FlashInit(); diff --git a/client/src/cmdparser.c b/client/src/cmdparser.c index 76c28118a..2341d44ae 100644 --- a/client/src/cmdparser.c +++ b/client/src/cmdparser.c @@ -122,6 +122,30 @@ bool IfPm3FpcUsartFromUsb(void) { return IfPm3FpcUsartHostFromUsb() || IfPm3FpcUsartDevFromUsb(); } +bool IfPm5(void) { + if (IfPm3Present() == false) + return false; + return g_pm3_capabilities.is_pm5; +} + +bool IfPm5StdAnt(void) { + if (IfPm3Present() == false) + return false; + return g_pm3_capabilities.is_pm5_std_ant; +} + +bool IfFpgaFlash(void) { + if (IfPm3Present() == false) + return false; + return g_pm3_capabilities.hw_available_fpga_flash; +} + +bool IfI2cEeprom(void) { + if (IfPm3Present() == false) + return false; + return g_pm3_capabilities.hw_available_i2c_eeprom; +} + bool IfPm3Lf(void) { if (IfPm3Present() == false) return false; diff --git a/client/src/cmdparser.h b/client/src/cmdparser.h index 4bfe71394..1e3fde01c 100644 --- a/client/src/cmdparser.h +++ b/client/src/cmdparser.h @@ -41,6 +41,10 @@ bool IfPm3FpcUsartHost(void); bool IfPm3FpcUsartHostFromUsb(void); bool IfPm3FpcUsartDevFromUsb(void); bool IfPm3FpcUsartFromUsb(void); +bool IfPm5(void); +bool IfPm5StdAnt(void); +bool IfFpgaFlash(void); +bool IfI2cEeprom(void); bool IfPm3Lf(void); bool IfPm3Hitag(void); bool IfPm3EM4x50(void); diff --git a/include/pm3_cmd.h b/include/pm3_cmd.h index c18be6ca9..cbd25a3b0 100644 --- a/include/pm3_cmd.h +++ b/include/pm3_cmd.h @@ -243,8 +243,14 @@ typedef struct { bool hw_available_flash : 1; bool hw_available_smartcard : 1; bool is_rdv4 : 1; + + // pm5 + bool hw_available_fpga_flash : 1; + bool hw_available_i2c_eeprom : 1; + bool is_pm5 : 1; + bool is_pm5_std_ant : 1; } PACKED capabilities_t; -#define CAPABILITIES_VERSION 7 +#define CAPABILITIES_VERSION 8 extern capabilities_t g_pm3_capabilities; typedef struct { From 7c436d2d5829218e3a712d724b03a3ea7efaeee5 Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Wed, 19 Aug 2026 11:48:21 +0200 Subject: [PATCH 39/43] guard pm5 commands with capabilities --- client/src/cmdfpga.c | 2 +- client/src/cmdhw.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/client/src/cmdfpga.c b/client/src/cmdfpga.c index 62a47e220..d720d65b3 100644 --- a/client/src/cmdfpga.c +++ b/client/src/cmdfpga.c @@ -181,7 +181,7 @@ static command_t CommandTable[] = { {"help", CmdHelp, AlwaysAvailable, "This help"}, {"-------------", CmdHelp, AlwaysAvailable, "----------------------- " _CYAN_("Operation") " -----------------------"}, {"config", CmdConfigFpga, IfPm3Present, "Configure FPGA for sram or flash"}, - {"pwrpwm", CmdFpgaSetPowerPWM, IfPm3Present, "Adjust the input voltage of the driver through FPGA."}, + {"pwrpwm", CmdFpgaSetPowerPWM, IfPm5, "Adjust the input voltage of the driver through FPGA."}, {NULL, NULL, NULL, NULL} }; diff --git a/client/src/cmdhw.c b/client/src/cmdhw.c index 0d5747681..b0d3f50f0 100644 --- a/client/src/cmdhw.c +++ b/client/src/cmdhw.c @@ -1926,9 +1926,9 @@ static command_t CommandTable[] = { {"dbg", CmdDbg, IfPm3Present, "Set device side debug level"}, {"fpga", CmdFPGA, IfPm3Present, "Fpga commands"}, {"fpgaoff", CmdFPGAOff, IfPm3Present, "Turn off FPGA on device"}, - {"ant_pm5", CmdPM5Ant, IfPm3Present, "Control the antennal of pm5"}, - {"qc_pm5", CmdPM5QCTest, IfPm3Present, "Perform QC test for the PM5"}, - {"factorydata", CmdDeviceFactoryData,IfPm3Present, "Get/Set the factory data for Device"}, + {"ant_pm5", CmdPM5Ant, IfPm5StdAnt, "Control the antennal of pm5"}, + {"qc_pm5", CmdPM5QCTest, IfPm5, "Perform QC test for the PM5"}, + {"factorydata", CmdDeviceFactoryData, IfI2cEeprom, "Get/Set the factory data for Device"}, {"lcd", CmdLCD, IfPm3Lcd, "Send command/data to LCD"}, {"lcdreset", CmdLCDReset, IfPm3Lcd, "Hardware reset LCD"}, {"ping", CmdPing, IfPm3Present, "Test if the Proxmark3 is responsive"}, From 430fea5338d70add80038806d7b730d1ceea1af9 Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Wed, 19 Aug 2026 11:58:30 +0200 Subject: [PATCH 40/43] Guard fpga config flash mode with capability --- client/src/cmdfpga.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/client/src/cmdfpga.c b/client/src/cmdfpga.c index d720d65b3..0523fcc23 100644 --- a/client/src/cmdfpga.c +++ b/client/src/cmdfpga.c @@ -33,6 +33,11 @@ static int CmdConfigFpga(const char *Cmd) { CLIParserFree(ctx); + if ((! sram_mode) && (! IfFpgaFlash())) { + PrintAndLogEx(WARNING, "This device does not support FPGA flash configuration"); + return PM3_ENOTIMPL; + } + // Check if file name is provided if (fnlen == 0) { PrintAndLogEx(WARNING, "No file specified"); From ddd8e574276993e62ad244b640f8ea54439efba2 Mon Sep 17 00:00:00 2001 From: Philippe Teuwen Date: Wed, 19 Aug 2026 12:59:29 +0200 Subject: [PATCH 41/43] Make loclass/cipher_bs_avx* compatible with clang --- client/src/loclass/cipher_bs_avx2.c | 28 +++++++++++++++++---------- client/src/loclass/cipher_bs_avx512.c | 12 ++++++++++-- 2 files changed, 28 insertions(+), 12 deletions(-) diff --git a/client/src/loclass/cipher_bs_avx2.c b/client/src/loclass/cipher_bs_avx2.c index c72238c26..2f93fbbca 100644 --- a/client/src/loclass/cipher_bs_avx2.c +++ b/client/src/loclass/cipher_bs_avx2.c @@ -18,10 +18,14 @@ #include -#if (defined(__GNUC__) || defined(__clang__)) && !defined(__ANDROID__) +#if !defined(__ANDROID__) +#if defined(__clang__) +#pragma clang attribute push(__attribute__((target("avx2"))), apply_to = function) +#elif defined(__GNUC__) #pragma GCC push_options #pragma GCC target("avx2") #endif +#endif #define BS_ZERO _mm256_setzero_si256() #define BS_ONES _mm256_set1_epi64x(-1) @@ -121,7 +125,7 @@ static const uint64_t LANE_BITS_256_RAW[8][BS256_WORDS] = { }; static inline __m256i lane_bits_256(int k) { - return _mm256_loadu_si256((const __m256i *)LANE_BITS_256_RAW[k]); + return _mm256_loadu_si256((const __m256i *)(const void *)LANE_BITS_256_RAW[k]); } static inline void bs_init_state(const __m256i kb[64], __m256i l[8], __m256i r[8], __m256i b[8], __m256i t[16]) { @@ -174,7 +178,7 @@ static inline void bs_init_state(const __m256i kb[64], __m256i l[8], __m256i r[8 } void prepare_ccnr_bits_bs256(const uint8_t *cc_nr, uint64_t y_bits_bs[96 * BS256_WORDS]) { - __m256i *y = (__m256i *)y_bits_bs; + __m256i *y = (__m256i *)(void *)y_bits_bs; for (int i = 0; i < 12; i++) { const uint8_t byte = cc_nr[i]; for (int bit = 0; bit < 8; bit++) { @@ -184,7 +188,7 @@ void prepare_ccnr_bits_bs256(const uint8_t *cc_nr, uint64_t y_bits_bs[96 * BS256 } void prepare_target_mac_bs256(const uint8_t target_mac[4], uint64_t target_mac_bs[32 * BS256_WORDS]) { - __m256i *tm = (__m256i *)target_mac_bs; + __m256i *tm = (__m256i *)(void *)target_mac_bs; for (int i = 0; i < 4; i++) { const uint8_t byte = target_mac[i]; for (int bit = 0; bit < 8; bit++) { @@ -194,7 +198,7 @@ void prepare_target_mac_bs256(const uint8_t target_mac[4], uint64_t target_mac_b } void build_bitslice_key_256(const uint8_t partial_key[8], uint64_t index_start, uint64_t kb[64 * BS256_WORDS]) { - __m256i *k = (__m256i *)kb; + __m256i *k = (__m256i *)(void *)kb; for (int j = 0; j < 8; j++) { _mm256_storeu_si256(&k[j * 8 + 0], (partial_key[j] & 0x01) ? BS_ONES : BS_ZERO); @@ -226,7 +230,7 @@ void doMAC_brute_match256(const uint64_t y_bits_bs[96 * BS256_WORDS], // Load key into local __m256i array for fast access. __m256i k[64]; - const __m256i *kb_m = (const __m256i *)kb; + const __m256i *kb_m = (const __m256i *)(const void *)kb; for (int i = 0; i < 64; i++) { k[i] = _mm256_loadu_si256(&kb_m[i]); } @@ -234,8 +238,8 @@ void doMAC_brute_match256(const uint64_t y_bits_bs[96 * BS256_WORDS], __m256i l[8], r[8], b[8], t[16]; bs_init_state(k, l, r, b, t); - const __m256i *y = (const __m256i *)y_bits_bs; - const __m256i *tm = (const __m256i *)target_mac_bs; + const __m256i *y = (const __m256i *)(const void *)y_bits_bs; + const __m256i *tm = (const __m256i *)(const void *)target_mac_bs; for (int i = 0; i < 96; i++) { bs_tick(t, b, l, r, k, _mm256_loadu_si256(&y[i])); @@ -260,12 +264,16 @@ void doMAC_brute_match256(const uint64_t y_bits_bs[96 * BS256_WORDS], } } - _mm256_storeu_si256((__m256i *)match_out, mac_match); + _mm256_storeu_si256((__m256i *)(void *)match_out, mac_match); } -#if (defined(__GNUC__) || defined(__clang__)) && !defined(__ANDROID__) +#if !defined(__ANDROID__) +#if defined(__clang__) +#pragma clang attribute pop +#elif defined(__GNUC__) #pragma GCC pop_options #endif +#endif bool bs_avx2_supported(void) { static int cached = -1; diff --git a/client/src/loclass/cipher_bs_avx512.c b/client/src/loclass/cipher_bs_avx512.c index 4cb784457..e1bf79b2c 100644 --- a/client/src/loclass/cipher_bs_avx512.c +++ b/client/src/loclass/cipher_bs_avx512.c @@ -19,10 +19,14 @@ #include -#if (defined(__GNUC__) || defined(__clang__)) && !defined(__ANDROID__) +#if !defined(__ANDROID__) +#if defined(__clang__) +#pragma clang attribute push(__attribute__((target("avx512f"))), apply_to = function) +#elif defined(__GNUC__) #pragma GCC push_options #pragma GCC target("avx512f") #endif +#endif #define BS_ZERO _mm512_setzero_si512() #define BS_ONES _mm512_set1_epi64(-1) @@ -291,9 +295,13 @@ void doMAC_brute_match512(const uint64_t y_bits_bs[96 * BS512_WORDS], _mm512_storeu_si512((void *)match_out, mac_match); } -#if (defined(__GNUC__) || defined(__clang__)) && !defined(__ANDROID__) +#if !defined(__ANDROID__) +#if defined(__clang__) +#pragma clang attribute pop +#elif defined(__GNUC__) #pragma GCC pop_options #endif +#endif bool bs_avx512_supported(void) { static int cached = -1; From 0b40585124d517c07cee65af1390719ce7c78cd0 Mon Sep 17 00:00:00 2001 From: Cole Munz Date: Mon, 17 Aug 2026 12:23:59 -0500 Subject: [PATCH 42/43] Set the stringop-overflow flags before add_subdirectory(deps) With the linker pin in place the proxspace job gets past the bootrom and dies later instead, in the cmake build: client/deps/jansson/load.c:193:35: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=] client/CMakeLists.txt already turns that false positive off for GCC 10 and newer, but it does it at line 876 while add_subdirectory(deps) runs at line 295. CMake copies the calling scope into a subdirectory at the add_subdirectory call, so anything set afterwards never reaches the bundled deps, and jansson is built without the suppression that the rest of the client gets. Move the block above the add_subdirectory call in both client and experimental_lib. Checked by configuring before and after: 0 of 17 deps targets carried -Wno-error=stringop-overflow in their flags.make before, 17 of 17 after. ubuntu-cmake and macos-cmake stay green either way; their compilers do not emit this particular false positive, which is why the gap went unnoticed while the bootrom link was failing first. Signed-off-by: Cole Munz --- client/CMakeLists.txt | 26 +++++++++++++++----------- client/experimental_lib/CMakeLists.txt | 26 +++++++++++++++----------- 2 files changed, 30 insertions(+), 22 deletions(-) diff --git a/client/CMakeLists.txt b/client/CMakeLists.txt index aaa22bd9a..5cdc633b3 100644 --- a/client/CMakeLists.txt +++ b/client/CMakeLists.txt @@ -292,6 +292,21 @@ if (NOT SKIPWHEREAMISYSTEM EQUAL 1) endif (WHEREAMI_INCLUDE_DIRS AND WHEREAMI_LIBRARIES) endif (NOT SKIPWHEREAMISYSTEM EQUAL 1) +# These must be set BEFORE add_subdirectory(deps): CMake copies the +# current variable scope into a subdirectory at that point, so flags set +# further down never reach the bundled deps and jansson fails the +# -Werror=stringop-overflow false positive on its own. +# GCC 10 has issues with false positives on stringop-overflow, +# let's disable them for now (cf https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92955, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94335) +# beware these flags didn't exist for GCC < 7 +if(CMAKE_COMPILER_IS_GNUCXX) + execute_process(COMMAND ${CMAKE_C_COMPILER} -dumpversion OUTPUT_VARIABLE GCC_VERSION) + if (GCC_VERSION VERSION_GREATER 10.0 OR GCC_VERSION VERSION_EQUAL 10.0) + set(CMAKE_C_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_C_FLAGS}") + set(CMAKE_CXX_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_CXX_FLAGS}") + endif() +endif(CMAKE_COMPILER_IS_GNUCXX) + add_subdirectory(${PM3_ROOT}/client/deps deps) set (TARGET_SOURCES @@ -874,17 +889,6 @@ if (MINGW) set(ADDITIONAL_LNK ws2_32 ${ADDITIONAL_LNK}) endif (MINGW) -# GCC 10 has issues with false positives on stringop-overflow, -# let's disable them for now (cf https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92955, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94335) -# beware these flags didn't exist for GCC < 7 -if(CMAKE_COMPILER_IS_GNUCXX) - execute_process(COMMAND ${CMAKE_C_COMPILER} -dumpversion OUTPUT_VARIABLE GCC_VERSION) - if (GCC_VERSION VERSION_GREATER 10.0 OR GCC_VERSION VERSION_EQUAL 10.0) - set(CMAKE_C_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_C_FLAGS}") - set(CMAKE_CXX_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_CXX_FLAGS}") - endif() -endif(CMAKE_COMPILER_IS_GNUCXX) - target_include_directories(proxmark3 PRIVATE ${PM3_ROOT}/common ${PM3_ROOT}/common_fpga diff --git a/client/experimental_lib/CMakeLists.txt b/client/experimental_lib/CMakeLists.txt index 0ebb32882..f6e8e89b8 100644 --- a/client/experimental_lib/CMakeLists.txt +++ b/client/experimental_lib/CMakeLists.txt @@ -212,6 +212,21 @@ if (NOT SKIPWHEREAMISYSTEM EQUAL 1) endif (WHEREAMI_INCLUDE_DIRS AND WHEREAMI_LIBRARIES) endif (NOT SKIPWHEREAMISYSTEM EQUAL 1) +# These must be set BEFORE add_subdirectory(deps): CMake copies the +# current variable scope into a subdirectory at that point, so flags set +# further down never reach the bundled deps and jansson fails the +# -Werror=stringop-overflow false positive on its own. +# GCC 10 has issues with false positives on stringop-overflow, +# let's disable them for now (cf https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92955, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94335) +# beware these flags didn't exist for GCC < 7 +if(CMAKE_COMPILER_IS_GNUCXX) + execute_process(COMMAND ${CMAKE_C_COMPILER} -dumpversion OUTPUT_VARIABLE GCC_VERSION) + if (GCC_VERSION VERSION_GREATER 10.0 OR GCC_VERSION VERSION_EQUAL 10.0) + set(CMAKE_C_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_C_FLAGS}") + set(CMAKE_CXX_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_CXX_FLAGS}") + endif() +endif(CMAKE_COMPILER_IS_GNUCXX) + add_subdirectory(${PM3_ROOT}/client/deps deps) set (TARGET_SOURCES @@ -707,17 +722,6 @@ if (MINGW) set(ADDITIONAL_LNK ws2_32 ${ADDITIONAL_LNK}) endif (MINGW) -# GCC 10 has issues with false positives on stringop-overflow, -# let's disable them for now (cf https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92955, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94335) -# beware these flags didn't exist for GCC < 7 -if(CMAKE_COMPILER_IS_GNUCXX) - execute_process(COMMAND ${CMAKE_C_COMPILER} -dumpversion OUTPUT_VARIABLE GCC_VERSION) - if (GCC_VERSION VERSION_GREATER 10.0 OR GCC_VERSION VERSION_EQUAL 10.0) - set(CMAKE_C_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_C_FLAGS}") - set(CMAKE_CXX_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_CXX_FLAGS}") - endif() -endif(CMAKE_COMPILER_IS_GNUCXX) - target_include_directories(pm3rrg_rdv4 PRIVATE ${PM3_ROOT}/common ${PM3_ROOT}/common_fpga From 070bdf78a131db97ad72506e2c181c002eb19cd2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Chlo=C3=A9=20Franke?= Date: Fri, 14 Aug 2026 21:06:34 +0200 Subject: [PATCH 43/43] Fixed hardcoded length of debug print of authentication nonce for mifare desfire --- client/src/mifare/desfirecore.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/client/src/mifare/desfirecore.c b/client/src/mifare/desfirecore.c index d06691744..c348fd3a9 100644 --- a/client/src/mifare/desfirecore.c +++ b/client/src/mifare/desfirecore.c @@ -1404,8 +1404,8 @@ static int DesfireAuthenticateEV1(DesfireContext_t *dctx, DesfireSecureChannel s DesfireCryptoEncDecEx(dctx, DCOMainKey, encRndB, rndlen, RndB, false, false, IV); if (g_debugMode > 1) { - PrintAndLogEx(DEBUG, "encRndB: %s", sprint_hex(encRndB, 8)); - PrintAndLogEx(DEBUG, "RndB: %s", sprint_hex(RndB, 8)); + PrintAndLogEx(DEBUG, "encRndB: %s", sprint_hex(encRndB, rndlen)); + PrintAndLogEx(DEBUG, "RndB: %s", sprint_hex(RndB, rndlen)); } // - Rotate RndB by 8 bits @@ -1435,7 +1435,7 @@ static int DesfireAuthenticateEV1(DesfireContext_t *dctx, DesfireSecureChannel s memcpy(tmp + rndlen, rotRndB, rndlen); if (g_debugMode > 1) { PrintAndLogEx(DEBUG, "rotRndB: %s", sprint_hex(rotRndB, rndlen)); - PrintAndLogEx(DEBUG, "Both : %s", sprint_hex(tmp, 32)); + PrintAndLogEx(DEBUG, "Both : %s", sprint_hex(tmp, rndlen * 2)); } DesfireCryptoEncDecEx(dctx, DCOMainKey, tmp, rndlen * 2, both, true, true, IV); }