HID SAM: read MIFARE Classic SE through CMD_HF_SAM_MFC
sam_mfc.c was empty and CMD_HF_SAM_MFC was a no-op. Implement the relay the way Seader's plugin_hf_mfc_transmit does it. The SAM runs Crypto1 itself and tags each nfcSend with a format: - 00 C0 00: plain bytes, CRC already included, parity generated - 00 00 40 / 24 / 44: air order bit stream carrying the SAM's own parity Answers to the latter go back in the same bit form, len + len / 8 + 1 bytes like Seader. Unlike Seader, every byte gets its real parity bit; Seader leaves bytes 8 and on at zero. A silent card is reported to the SAM as rfStatus 00 20, an unknown format as 00 04, Seader's codes, and the conversation continues. Card detected follows Seader for MIFARE Classic: protocol, CSN and SAK, no ATQA. The card is selected without RATS. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
d2e077ded9
commit
0fdbdbdadd
5 files changed
+324
-1
No files matched your search
@@ -1024,6 +1024,62 @@ out:
|
||||
return res;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Wraps a card answer, or an RF error, into an nfcRx for the SAM.
|
||||
*
|
||||
* With nfc_len 0 the data node is left out, as Seader does for errors.
|
||||
*
|
||||
* @param rf_status 0x0000 ok, 0x0020 timeout, 0x0004 protocol error (Seader's codes)
|
||||
* @return Length of SAM APDU to be sent.
|
||||
*/
|
||||
uint16_t sam_copy_payload_nfc2sam_status(uint8_t *sam_tx, const uint8_t *nfc_rx, uint8_t nfc_len, uint16_t rf_status) {
|
||||
|
||||
const uint8_t payload[] = {
|
||||
0xbd, 4,
|
||||
0xa0, 2,
|
||||
0xa0, 0
|
||||
};
|
||||
|
||||
const uint8_t tag81[] = {
|
||||
(uint8_t)(rf_status >> 8), (uint8_t)rf_status
|
||||
};
|
||||
|
||||
memcpy(sam_tx, payload, sizeof(payload));
|
||||
|
||||
if (nfc_len) {
|
||||
sam_append_asn1_node(sam_tx, sam_tx + 4, 0x80, nfc_rx, nfc_len);
|
||||
}
|
||||
sam_append_asn1_node(sam_tx, sam_tx + 4, 0x81, tag81, sizeof(tag81));
|
||||
|
||||
return sam_tx[1] + 2;
|
||||
}
|
||||
|
||||
// Copies the 3 byte format node of the SAM's nfcSend, if there is one.
|
||||
bool sam_nfc_send_format(const uint8_t *sam_rx_buf, uint16_t sam_rx_len, uint8_t *format) {
|
||||
|
||||
// a1 <len> a1 <len> 80 .. 81 .. 82 .. 85 03 <format>
|
||||
uint16_t p = sam_rx_prefix_len(sam_rx_buf, sam_rx_len);
|
||||
if ((uint16_t)(p + 4) >= sam_rx_len) {
|
||||
return false;
|
||||
}
|
||||
|
||||
const uint8_t *node = sam_rx_buf + p + 2;
|
||||
const uint8_t *end = node + 2 + node[1];
|
||||
if (end > sam_rx_buf + sam_rx_len) {
|
||||
return false;
|
||||
}
|
||||
|
||||
const uint8_t *cur = node + 2;
|
||||
while (cur + 2 <= end) {
|
||||
if (cur[0] == 0x85 && cur[1] == 3 && cur + 5 <= end) {
|
||||
memcpy(format, cur + 2, 3);
|
||||
return true;
|
||||
}
|
||||
cur += 2 + cur[1];
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
// Plaintext seen on the air during a SAM conversation, for the extended reply.
|
||||
#define SAM_CAP_FIRST_BLOCK 6
|
||||
#define SAM_CAP_BLOCKS (SAM_EXT_SIO_MAX / 8)
|
||||
|
||||
Reference in new issue
Block a user