README update

This commit is contained in:
QuantumEntangledAndy committed 2023-04-13 13:35:05 +07:00
1 parent 7faddb3b50
commit 7ae5e14c2d
6 files changed
+25 -660

No files matched your search

@@ -47,23 +47,23 @@ The config file tells Neolink how to connect to your camera and serve the video
1. Create a simple text file (i.g. `config.toml`) in the same directory you have unpacked Neolink with the following format:
bind = "0.0.0.0"
[[cameras]]
name = "cameraname"
username = "admin"
password = "password"
address = "192.168.1.10:9000"
stream = "both"
2. Change `cameraname` to a legible, phonetic name that describes your camera. Leave the quotes around the name.
3. The default username is `admin`; leave this unless you've created another user.
4. Replace `password` with the password you set on the camera. If you chose to not use a password, remove this line from the config file. Again, leave the quotes.
5. Replace `192.168.1.10:9000` with the IP address you set for your camera.
5. Replace `192.168.1.10:9000` with the IP address you set for your camera.
Note: The port, `:9000`, should remain at the end of your IP address. This is the proprietary "media port" that Reolink uses.
6. The `stream` line allows you to choose which stream type to use. Neolink supports streaming two streams, the main-stream, and the sub-stream. It can stream either one, or both. If you wish to stream both streams, leave this line as is. If you wish to stream _only_ the main-stream, change `both` to `mainStream`. If you wish to stream only the sub-stream, change `both` to `subStream`.
Note: Reolink D400/B400 Cameras **_do not support serving both streams at once_**, so you must manually choose which stream type to use. For best quality, choose the main stream.
@@ -190,7 +190,7 @@ _The best way to have Neolink run at startup is create a Scheduled Task that sta
12. Check "If the task fails, restart every:"
13. For redundancy, enter `999` into the number of restart tries.
13. For redundancy, enter `999` into the number of restart tries.
_The Settings tab should look something like this:_