diff --git a/Software-description.md b/Software-description.md index e735dd8..a46c59b 100644 --- a/Software-description.md +++ b/Software-description.md @@ -60,7 +60,7 @@ To achieve better control [Feed-forward](https://en.wikipedia.org/wiki/Feed_forw Back-EMF voltage measurement ------------------------------------- -To provide a feedback signal which is proportional to the motor speed the ADC is used to measure the [Back-EMF voltage](https://en.wikipedia.org/wiki/Counter-electromotive_force). The measurement works by setting the PWM duty cycle to 0%, waiting for a certain delay time (CV_62) and then measuring x times (x = CV_63). While measuring the array with measurement values are being sorted using insertion sort. Afterwards y elements (y = CV_63) from the left (lowest values) and z elements (z = CV_64) from the right (highest values) will be dismissed to mitigate the impact of potential outliers in measurement. The average value of the remaining values will be computed and fed back into the control algorithm. Considering default settings (100us delay, 100 measurement iterations, 5ms sampling time) the complete measurement run including averaging takes about 0.3ms to 0.35ms which effectively reduces the maximum possible duty cycle to about 93% to 94%. +To provide a feedback signal which is proportional to the motor speed the ADC is used to measure the [Back-EMF voltage](https://en.wikipedia.org/wiki/Counter-electromotive_force). The measurement works by setting the PWM duty cycle to 0%, waiting for a certain delay time (CV_62) and then measuring x times (x = CV_63). While measuring the array with measurement values are being sorted using insertion sort. Afterwards y elements (y = CV_63) from the left (lowest values) and z elements (z = CV_64) from the right (highest values) will be dismissed to mitigate the impact of potential outliers in measurement. The average value of the remaining values will be computed and fed back into the control algorithm. Considering default settings (100us delay, 100 samples, ~2µs sampling time) the complete measurement run including averaging takes about 0.3ms to 0.35ms which effectively reduces the maximum possible duty cycle to about 93% to 94%. DCC signal decoding -------------------------------------