Updated Hardware description (markdown)

Gabriel Koppenstein committed 2022-01-29 11:57:49 +01:00
1 parent 0403d9d278
commit dbd54b803a
1 file changed
+4 -4
+4 -4
@@ -1,6 +1,6 @@
Overview Overview
-------------------------- --------------------------
![Block Diagram](https://github.com/1nct/RP2040-Decoder/blob/main/svg/Block_Diagram.svg) ![Block Diagram](https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Block_Diagram.svg)
The above block diagram gives a general overview regarding the operation of components. For better illustration it has been divided into four functional blocks. Furthermore these functional blocks can be subdivided and will be explained in detail. The above block diagram gives a general overview regarding the operation of components. For better illustration it has been divided into four functional blocks. Furthermore these functional blocks can be subdivided and will be explained in detail.
@@ -38,7 +38,7 @@ Characteristics
Input Stage Input Stage
-------------------------- --------------------------
![Block Diagram](https://github.com/1nct/RP2040-Decoder/blob/main/svg/Input.svg) ![Input Stage](https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Input.svg)
D1 Rectifies the DCC square-wave into DC, the amplitude is not critical as long as its within the 25V limit. The rectified Voltage is then provided to the 3.3V voltage regulator (U1) and to the motor driver (U2). D1 Rectifies the DCC square-wave into DC, the amplitude is not critical as long as its within the 25V limit. The rectified Voltage is then provided to the 3.3V voltage regulator (U1) and to the motor driver (U2).
@@ -46,7 +46,7 @@ The circuit on the left ensures that the DCC signal is in a suitable voltage ran
Motor Driver Motor Driver
-------------------------- --------------------------
![Block Diagram](https://github.com/1nct/RP2040-Decoder/blob/main/svg/Motor_Driver.svg) ![Motor Driver](https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Motor_Driver.svg)
The Motor Driver is a complete H-Bridge IC specifically made for DC-Motors. The Motor Driver is a complete H-Bridge IC specifically made for DC-Motors.
@@ -64,6 +64,6 @@ Note: ADC converts 3.3V to 4096 and 0V to 0
Auxillary Output Auxillary Output
-------------------------- --------------------------
![Block Diagram](https://github.com/1nct/RP2040-Decoder/blob/main/svg/Auxillary.svg) ![Auxillary Output](https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Auxillary.svg)
Switching of loads up to a maximum of about ~750mA can be done using these four N-Channel MOSFETS. They are switching on the low-side which means the load is either switched on and connected to GND or switched off and not connected to GND. So in order to connect any load, the load needs to be supplied by the +12V and the negative "-" side has to be connected to AUX(X). Switching of loads up to a maximum of about ~750mA can be done using these four N-Channel MOSFETS. They are switching on the low-side which means the load is either switched on and connected to GND or switched off and not connected to GND. So in order to connect any load, the load needs to be supplied by the +12V and the negative "-" side has to be connected to AUX(X).