Updated Getting started (markdown)

Gabriel Koppenstein committed 2022-08-06 14:14:30 +02:00
1 parent 98ca79123d
commit a966a9fd75
1 file changed
+1 -1
+1 -1
@@ -40,7 +40,7 @@ To build the software and run it on the Controller we need to interface the RP20
Please refer to [Getting started - Pico](https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf). Chapter 3 & 5 and Appendix A are the most relevant but you might also refer to chapter 9.1 if you are using macOS. Please refer to [Getting started - Pico](https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf). Chapter 3 & 5 and Appendix A are the most relevant but you might also refer to chapter 9.1 if you are using macOS.
## 4. Wiring and initial commissioning ## 4. Wiring and initial startup
<img src="https://github.com/gab-k/RP2040-Decoder/blob/main/docs/svg/Wiring_diagram.svg" width="700"/> <img src="https://github.com/gab-k/RP2040-Decoder/blob/main/docs/svg/Wiring_diagram.svg" width="700"/>
The illustration above shows an example wiring configuration. A Free-wheeling diode should be used when switching inductive loads! The illustration above shows an example wiring configuration. A Free-wheeling diode should be used when switching inductive loads!