From 76b37598397b95a775050acd5d3a6d9e3aecc099 Mon Sep 17 00:00:00 2001 From: Gabriel Koppenstein <82903393+1nct@users.noreply.github.com> Date: Fri, 28 Jan 2022 00:37:42 +0100 Subject: [PATCH] Updated Home (markdown) --- Home.md | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/Home.md b/Home.md index 41852e9..59a8601 100644 --- a/Home.md +++ b/Home.md @@ -1,14 +1,17 @@ -# Welcome to the pico-decoder wiki! +# Welcome to the RP2040-Decoder wiki! -This Wiki tries to give a brief overview over functionalities, hardware and software of the RP2040-Decoder. +This Wiki tries to give an overview over functionalities, hardware and software of the RP2040-Decoder. +It is still work in progress. -## What is this project about? -The RP2040-Decoder is a DIY DCC Decoder for locomotives which aims to be cost effective. It is based around a RP2040 microcontroller. The Software is written in C. +## Table of Contents +- [Getting started](https://github.com/1nct/RP2040-Decoder/wiki/Getting-started) +- [Hardware description](https://github.com/1nct/RP2040-Decoder/wiki/Hardware-description) +- [Software description](https://github.com/1nct/RP2040-Decoder/wiki/Hardware-description) + + +### What is DCC? Further details on what DCC is can be found here: * [nmra.org (English)](https://www.nmra.org/dcc-working-group) * [railcommunity.org (German)](https://railcommunity.org/index.php?option=com_content&view=article&id=49&Itemid=61&eprivacy=1) - - -Even if in some places the standards specified by the NMRA may not be strictly adhered to. As a rule, however, attempts were always made to adhere to them. This means that the decoder should be compatible with all central units. \ No newline at end of file