Files
RP2040-Decoder/core1.h
T
1nct f09c4ff136 - Reduced amount of global variables. Many variables are now initialized in main() and core1_entry() respectively and then passed as pointer.
- Updates in speed steps are passed via multicore fifo.
- Pointer to direction variable is also passed from core1 to core0 via multicore fifo
- PID parameter struct definition moved to core1.h
- Implemented variable Proportional gain function
- Implemented function to determine base pwm level
- Minor changes regarding variable names
- Added more comments to roughly describe functionality of functions
2022-07-28 14:33:48 +02:00

66 lines
3.3 KiB
C

//////////////////////////
// RP2040-Decoder //
// Gabriel Koppenstein //
// core1.h //
//////////////////////////
#pragma once
#include "shared.h"
#include <math.h>
typedef struct pid_params{
// Controller variables - won't change after init
float k_i; // Integral gain
float k_d; // Derivative gain
float t; // Sampling time
float tau; // Low-pass-filter time constant
float k_ff; // Feed-Forward gain
float ci_0; // (k_i*t)/2
float cd_0; // (k_d*2)/(2*tau+t)
float cd_1; // (2*tau-t)/(2*tau+t)
float int_lim_max; // max limit for integrator
float int_lim_min; // min limit for integrator
float max_output; // max possible pwm output value
// Controller variables - might change on runtime
float k_p; // Proportional gain
float e_prev; // Previous Error
float integral_prev; // Previous Integral Value
float derivative_prev; // Previous Derivative Value
float measurement_prev; // Previous Measurement
float x_1_fwd; // Base Speed; forward direction
float x_2_fwd; // High Speed; forward direction
float y_1_fwd; // Base PWM; forward direction
float y_2_fwd; // High PWM; forward direction
float x_1_rev; // Base Speed; reverse direction
float x_2_rev; // High Speed; reverse direction
float y_1_rev; // Base PWM; reverse direction
float y_2_rev; // High PWM; reverse direction
float m_fwd; // Slope forward direction
float m_rev; // Slope reverse direction
uint16_t speed_table[127]; // Array with setpoint values corresponding to every speed step
uint32_t speed_step_target; // End target speed step
uint16_t end_target_index; // Index for speed table array corresponding to end target speed step
uint32_t setpoint; // Current setpoint
uint32_t setpoint_prev; // Previous setpoint
bool direction; // Current Direction
bool direction_prev; // Previous Direction
// Measurement Variables
float measurement; // Newest Measurement value
float adc_offset; // ADC offset value
uint8_t msr_delay_in_us; // Delay before VEMF Measurement
uint8_t msr_total_iterations; // Amount of samples
uint8_t l_side_arr_cutoff; // Discarded samples (left side)
uint8_t r_side_arr_cutoff; // Discarded samples (right side)
}pid_params;
void update_speed_dir(pid_params *pid, uint32_t speed_step_target);
bool speed_helper(struct repeating_timer *t);
float measure(pid_params *pid,bool direction);
void adjust_pwm_level(uint16_t level, pid_params *pid);
void update_m(pid_params *pid);
void update_y(pid_params *pid,float i);
float get_ff_val(pid_params *pid);
float get_kp(pid_params *pid);
bool pid_control(struct repeating_timer *t);
uint16_t measure_base_pwm(pid_params *pid,bool direction);
void init_pid(pid_params *pid);
void init_motor_pwm(uint8_t gpio);