Files
RP2040-Decoder/docs/sphinx/source/hardware/hw_description.rst
T
2024-11-27 21:59:54 +01:00

134 lines
8.4 KiB
ReStructuredText

Hardware Description
====================
Overview
--------
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Block_Diagram.svg
:alt: Block Diagram
The above block diagram gives a general overview regarding the operation of components. For better illustration it has been divided into four functional blocks. Furthermore, these functional blocks can be subdivided and will be explained below.
* **Input Stage**
- DCC Signal Level Shift
- Bridge Rectifier & Voltage Regulator
* **Motor Driver**
- Motor Driver
- Back EMF measurement (ADC)
* **General Purpose**
- GPIO
- Auxiliary output
* **Microcontroller**
- Flash memory
- Crystal oscillator
Characteristics
---------------
.. table:: Characteristics table
:widths: auto
===================================================== ============================= ========= ========= =====
Parameter Symbol Minimum Maximum Unit
===================================================== ============================= ========= ========= =====
Absolute max. DCC Input Voltage V\ :sub:`DCC`\ -25 +25 V
Absolute max. GPIO Voltage\ :sup:`(0)`\ V\ :sub:`PIN`\ -0.5 3.3+0.5 V
Input Voltage High\ :sup:`(0)`\ V\ :sub:`IH`\ 2.145 3.6 V
Input Voltage Low\ :sup:`(0)`\ V\ :sub:`IL`\ 0 1.155 V
Total GPIO Current\ :sup:`(0)`\ I\ :sub:`IOVDD`\ 50 mA
Absolute max. motor output current\ :sup:`(1)`\ I\ :sub:`MOTOR`\ 2.8 A
Absolute max. auxiliary output current \ :sup:`(2)`\ I\ :sub:`AUX`\ 400 mA
===================================================== ============================= ========= ========= =====
(0): According to: `RP2040 Datasheet <https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf>`_ (assuming V\ :sub:`DD`\ = 3.3V)
(1): According to: `BDR6133 Datasheet <https://datasheet.lcsc.com/lcsc/2101211904_Bardeen-Micro--BDR6133_C2687793.pdf>`_
(2): According to: `T2N7002BK Datasheet <https://datasheet.lcsc.com/lcsc/1810271831_TOSHIBA-T2N7002BK-LM_C146372.pdf>`_
Input Stage
-----------
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Input_Stage.svg
:alt: Input Stage
D1 Rectifies the DCC square-wave into +V, the amplitude is not critical as long as it's within the 25V limit. The rectified voltage +V is then provided to the 3.3V voltage regulator (U1) and to the motor driver (U2).
The MOSFET on the right effectively translates the rather high DCC voltage to a suitable level for the microcontroller to process. When Q1 is turned off GPIO21 is pulled high by the RP2040 internal pull-up resistor, as soon as Q1 gets turned on (V<sub>GS</sub> > V<sub>GS,th</sub>), GPIO21 gets pulled to GND potential. R1 and R2 ensure that V<sub>GS</sub> doesn't exceed ±20V.
Motor Driver
------------
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Motor_Driver.svg
:alt: Motor Driver
The Motor Driver is a complete H-Bridge IC specifically made for DC-Motors.
In order to control the motor, it is necessary to measure the back-EMF. This is done by the ADC, which measures at Points ADC_EMF_A and ADC_EMF_B respectively. The two resistors are used as a voltage divider.
Auxiliary Output
----------------
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Aux_Outputs.svg
:alt: Auxiliary Output
Switching of loads up to a maximum of about ~400mA can be done using four N-Channel MOSFETs. They are switching on the low-side, which means the load effectively gets connected to GND potential as the transistor starts to conduct. GPIO24 - GPIO27 are used.
GPIO
-----
To switch lighter loads, six soldering pads on the back side of the PCB are connected to GPIO0 - GPIO5 pins. Although not implemented yet, they could theoretically be used as inputs as well (e.g., Reed switch).
Microcontroller
---------------
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/Microcontroller.svg
:alt: Microcontroller
The Microcontroller needs a crystal oscillator to function properly. External flash memory is also needed as it holds the configuration variables and the program itself. R3 & C14 are used to filter ADC_AVDD (ADC Reference Voltage).
Complete Schematic
------------------
.. image:: https://github.com/1nct/RP2040-Decoder/blob/main/docs/svg/RP2040-Decoder.svg
:alt: Complete Schematic
BOM & Alternative Parts
------------------------
.. table:: BOM
:widths: auto
===================================================== ============================= ==================================== ============================= ===================== =========================
Ref Quantity Value Component Type Component Name Footprint
===================================================== ============================= ==================================== ============================= ===================== =========================
C1, C2, C5, C6, C14 5 10u Ceramic Capacitor / 0603_1608Metric
C3, C4, C7, C8, C9, C10, C11, C12, C13, C15 10 100n Ceramic Capacitor / 0603_1608Metric
C16, C17 2 33p Ceramic Capacitor / 0603_1608Metric
D1 1 V\ :sub:`RMS`\=40V, I\ :sub:`F`\=2A Bridge Rectifier KMB24F MBS (TO-269AA)
Q1, Q2, Q3, Q4, Q5 5 V\ :sub:`DS`\=60V, I\ :sub:`D`\=0.4A N-Channel MOSFET T2N7002BK SOT-23
R1, R2, R5, R6 4 6k8 Resistor / 0603_1608Metric
R3 1 200 Resistor / 0603_1608Metric
R7, R8, R9 3 1k Resistor / 0603_1608Metric
U1 1 V\ :sub:`OUT`\=3.3V Low Dropout Voltage Regulator HT7533S SOT-23
U2 1 I=2.8A H-Bridge Driver BDR6133 SOIC-8
U3 1 64Mb Flash Memory W25Q64JVSSIQ SOIC-8
U4 1 / Microcontroller RP2040 QFN-56-1EP_7x7mm_P0.4mm
Y1 1 f=12MHz Crystal Oscillator X322512MSB4SI Crystal_SMD_3225-4Pin_3.2x2.5mm
===================================================== ============================= ==================================== ============================= ===================== =========================
NOTE: Keep capacitor V\ :sub:`max`\ in mind!
Alternatives for BDR6133:
--------------------------
* `PT5126A-S-TP <https://lcsc.com/product-detail/Motor-Driver-ICs_PTC-Princeton-Tech-PT5126A-S-TP_C162093.html>`_
* `PT2476 <https://lcsc.com/product-detail/Motor-Driver-ICs_PTC-Princeton-Tech-PT2476_C481903.html>`_
Alternative for HT7533S:
------------------------
* `GS7533-33TR3 <https://www.lcsc.com/product-detail/Linear-Voltage-Regulators-LDO_Gainsil-GS7533-33TR3_C7427372.html>`_