439 lines
18 KiB
C
439 lines
18 KiB
C
//////////////////////////
|
|
// RP2040-Decoder //
|
|
// Gabriel Koppenstein //
|
|
// core0.c //
|
|
//////////////////////////
|
|
|
|
#include "core0.h"
|
|
bool target_direction = true; //Forward = true - Reverse = false
|
|
uint target_speed_step = 128; //128 = Stop (Forward Direction)
|
|
const uint8_t *CV_ARRAY_FLASH = (const uint8_t *) (XIP_BASE + FLASH_TARGET_OFFSET);
|
|
uint64_t last_bits = 0;
|
|
bool reset_package_flag = false;
|
|
absolute_time_t falling_edge_time,rising_edge_time;
|
|
uint16_t level_table[32] = {0};
|
|
|
|
uint16_t two_sigma(const uint16_t arr[], uint8_t length){
|
|
//Calculate arithmetic average
|
|
uint32_t sum = 0;
|
|
for (uint i = 0; i < length; ++i) {
|
|
sum += arr[i];
|
|
}
|
|
uint16_t x_avg = sum / length;
|
|
//Calculate variance
|
|
sum = 0;
|
|
for (uint8_t i = 0; i < length; ++i) {
|
|
sum += (arr[i]-x_avg)*(arr[i]-x_avg);
|
|
}
|
|
float variance = (float) sum/ (float)(length-1);
|
|
//Calculate standard deviation
|
|
uint16_t std_dev = (uint16_t)sqrtf(variance);
|
|
//"Filter" every array element that deviates more than 2*(std_dev)
|
|
sum = 0;
|
|
uint8_t counter = 0;
|
|
for (uint8_t i = 0; i < length; ++i) {
|
|
uint16_t val = arr[i]-x_avg;
|
|
if ( val < 2*std_dev || val > (0-2*std_dev) ){
|
|
sum += arr[i];
|
|
counter++;
|
|
}
|
|
}
|
|
//Calculate and return "new" arithmetic average from "filtered" array
|
|
return sum / counter;
|
|
}
|
|
void adc_offset_adjustment(uint8_t length){
|
|
length = 100;
|
|
uint16_t offsets[length];
|
|
//Set PWM level to 0 just for good measure
|
|
pwm_set_gpio_level(MOTOR_FWD_PIN, 0);
|
|
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
|
|
for (uint8_t i = 0; i < length; i++) {
|
|
uint16_t fwd = measure(true);
|
|
uint16_t rev = measure(false);
|
|
offsets[i] = (fwd+rev)/2;
|
|
}
|
|
uint8_t offsets_fwd_avg = two_sigma(offsets, length);
|
|
uint8_t CV_ARRAY_TEMP[CV_ARRAY_SIZE];
|
|
memcpy(CV_ARRAY_TEMP, CV_ARRAY_FLASH, sizeof(CV_ARRAY_TEMP));
|
|
CV_ARRAY_TEMP[171] = offsets_fwd_avg;
|
|
flash_range_erase(FLASH_TARGET_OFFSET, FLASH_SECTOR_SIZE);
|
|
flash_range_program(FLASH_TARGET_OFFSET, CV_ARRAY_TEMP, FLASH_PAGE_SIZE * 2);
|
|
}
|
|
uint16_t m_pwm_find_offset(uint16_t level, uint8_t step, uint8_t delay, uint32_t threshold, bool direction){
|
|
uint8_t gpio = MOTOR_FWD_PIN * direction + MOTOR_REV_PIN * !direction;
|
|
pwm_set_gpio_level(MOTOR_FWD_PIN,0);
|
|
pwm_set_gpio_level(MOTOR_REV_PIN,0);
|
|
while( measure(direction) < threshold ){
|
|
pwm_set_gpio_level(gpio,level);
|
|
busy_wait_ms(delay);
|
|
level += step;
|
|
}
|
|
pwm_set_gpio_level(MOTOR_FWD_PIN,0);
|
|
pwm_set_gpio_level(MOTOR_REV_PIN,0);
|
|
return level;
|
|
}
|
|
void m_pwm_offset_adjustment(uint8_t length){
|
|
uint16_t offsets_fwd[length];
|
|
uint16_t offsets_rev[length];
|
|
uint16_t max_lvl = _125M/(CV_ARRAY_FLASH[8]*100+10000);
|
|
for (uint8_t i = 0; i < length; ++i) {
|
|
offsets_fwd[i] = m_pwm_find_offset(0, max_lvl / 3000, 1, 30, true);
|
|
busy_wait_ms(500);
|
|
offsets_rev[i] = m_pwm_find_offset(0, max_lvl / 3000, 1, 30, false);
|
|
busy_wait_ms(500);
|
|
}
|
|
uint16_t offsets_fwd_avg = two_sigma(offsets_fwd, length);
|
|
uint16_t offsets_rev_avg = two_sigma(offsets_rev, length);
|
|
uint8_t CV_ARRAY_TEMP[CV_ARRAY_SIZE];
|
|
memcpy(CV_ARRAY_TEMP, CV_ARRAY_FLASH, sizeof(CV_ARRAY_TEMP));
|
|
CV_ARRAY_TEMP[53] = offsets_fwd_avg;
|
|
CV_ARRAY_TEMP[54] = offsets_fwd_avg>>8;
|
|
CV_ARRAY_TEMP[55] = offsets_rev_avg;
|
|
CV_ARRAY_TEMP[56] = offsets_rev_avg>>8;
|
|
flash_range_erase(FLASH_TARGET_OFFSET, FLASH_SECTOR_SIZE);
|
|
flash_range_program(FLASH_TARGET_OFFSET, CV_ARRAY_TEMP, FLASH_PAGE_SIZE * 2);
|
|
}
|
|
void acknowledge() {
|
|
uint16_t max_lvl = _125M/(CV_ARRAY_FLASH[8]*100+10000);
|
|
pwm_set_gpio_level(MOTOR_FWD_PIN, max_lvl);
|
|
busy_wait_ms(3);
|
|
pwm_set_gpio_level(MOTOR_FWD_PIN, 0);
|
|
pwm_set_gpio_level(MOTOR_REV_PIN, max_lvl);
|
|
busy_wait_ms(3);
|
|
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
|
|
}
|
|
void verify_cv_bit(uint16_t cv_address,bool bit_val, uint8_t bit_pos) {
|
|
uint8_t mask = 0b00000001;
|
|
bool res = ( (CV_ARRAY_FLASH[cv_address] >> bit_pos) &mask ) == bit_val;
|
|
if (res) {
|
|
acknowledge();
|
|
}
|
|
}
|
|
void verify_cv_byte(uint16_t cv_address, uint8_t cv_data){
|
|
if (CV_ARRAY_FLASH[cv_address] == cv_data) acknowledge();
|
|
}
|
|
void write_cv_byte(uint16_t cv_index, uint8_t cv_data){
|
|
//CV_7 & CV_8 are read-only
|
|
//Reset all CVs to Default (CV_8; Value = 8)
|
|
if(cv_index == 7 && cv_data == 8){
|
|
flash_range_erase(FLASH_TARGET_OFFSET, FLASH_SECTOR_SIZE);
|
|
flash_range_program(FLASH_TARGET_OFFSET, CV_ARRAY_DEFAULT, FLASH_PAGE_SIZE * 2);
|
|
}
|
|
//Motor PWM offset Adjustment (CV_7; Value = 7);
|
|
else if(cv_index == 6 && cv_data == 7){
|
|
m_pwm_offset_adjustment(CV_ARRAY_FLASH[57]);
|
|
}
|
|
//CV_1 = 0 is not permitted, therefore this is used to start the ADC offset adjustment routine
|
|
else if( !( cv_index&cv_data) ){
|
|
adc_offset_adjustment(100/*CV_ARRAY_FLASH[173]*/);
|
|
}
|
|
else{
|
|
uint8_t CV_ARRAY_TEMP[CV_ARRAY_SIZE];
|
|
memcpy(CV_ARRAY_TEMP, CV_ARRAY_FLASH, sizeof(CV_ARRAY_TEMP));
|
|
CV_ARRAY_TEMP[cv_index] = cv_data;
|
|
flash_range_erase(FLASH_TARGET_OFFSET, FLASH_SECTOR_SIZE);
|
|
flash_range_program(FLASH_TARGET_OFFSET, CV_ARRAY_TEMP, FLASH_PAGE_SIZE * 2);
|
|
acknowledge();
|
|
}
|
|
}
|
|
void program_mode(uint8_t number_of_bytes, const uint8_t byte_array[]){
|
|
//Check for valid programming command ("address" 112-127)
|
|
if (byte_array[number_of_bytes - 1]<128 && byte_array[number_of_bytes - 1]>111){
|
|
uint8_t instruction_type_mask = 0b00001100;
|
|
uint8_t instruction_type = instruction_type_mask & byte_array[number_of_bytes - 1];
|
|
uint8_t cv_address_ms_bits_mask = 0b00000011;
|
|
uint16_t cv_address_ms_bits = cv_address_ms_bits_mask & byte_array[number_of_bytes - 1];
|
|
uint16_t cv_address = byte_array[number_of_bytes - 2] + (cv_address_ms_bits << 8);
|
|
if(pid_control_timer.pool)alarm_pool_destroy(pid_control_timer.pool);
|
|
if(speed_helper_timer.pool)alarm_pool_destroy(speed_helper_timer.pool);
|
|
multicore_reset_core1();
|
|
uint32_t saved_interrupts = save_and_disable_interrupts();
|
|
if (instruction_type == 0b000001000) {
|
|
uint8_t bit_pos_mask = 0b00000111;
|
|
uint8_t bit_pos = bit_pos_mask&byte_array[number_of_bytes - 3];
|
|
uint8_t bit_val_mask = 0b00000001;
|
|
uint8_t bit_val_uint = (byte_array[number_of_bytes - 3]>>3) & bit_val_mask;
|
|
bool bit_val = bit_val_uint;
|
|
verify_cv_bit(cv_address, bit_val, bit_pos);
|
|
}
|
|
else if (instruction_type == 0b000000100) {
|
|
uint8_t cv_data = byte_array[number_of_bytes - 3];
|
|
verify_cv_byte(cv_address, cv_data);
|
|
}
|
|
else if (instruction_type == 0b000001100) {
|
|
uint8_t cv_data = byte_array[number_of_bytes - 3];
|
|
write_cv_byte(cv_address, cv_data);
|
|
}
|
|
restore_interrupts(saved_interrupts);
|
|
multicore_launch_core1(core1_entry);
|
|
multicore_fifo_pop_blocking(); //wait for core1 launch before proceeding
|
|
}
|
|
}
|
|
uint32_t get_32bit_CV (uint16_t CV_start_index){
|
|
uint8_t byte_0 = CV_ARRAY_FLASH[CV_start_index];
|
|
uint8_t byte_1 = CV_ARRAY_FLASH[CV_start_index+1];
|
|
uint8_t byte_2 = CV_ARRAY_FLASH[CV_start_index+2];
|
|
uint8_t byte_3 = CV_ARRAY_FLASH[CV_start_index+3];
|
|
return (byte_0) + (byte_1<<8) + (byte_2<<16) + (byte_3<<24);
|
|
}
|
|
uint16_t get_16bit_CV (uint16_t CV_start_index){
|
|
uint8_t byte_0 = CV_ARRAY_FLASH[CV_start_index];
|
|
uint8_t byte_1 = CV_ARRAY_FLASH[CV_start_index+1];
|
|
return (byte_0) + (byte_1<<8);
|
|
}
|
|
void set_outputs(uint32_t active_functions) {
|
|
uint32_t outputs_to_set = 0;
|
|
uint32_t outputs_with_PWM_enabled = get_32bit_CV(111); //get outputs with pwm enabled (bitmask)
|
|
uint32_t outputs_to_set_PWM = outputs_with_PWM_enabled;
|
|
for (uint8_t i = 0; i < 32; i++) {
|
|
if ( (active_functions>>i) & 1 ){
|
|
outputs_to_set |= get_32bit_CV(i * 8 + 260 - 4 * target_direction);
|
|
}
|
|
}
|
|
outputs_to_set &= GPIO_ALLOWED_OUTPUTS; // Prevent illegal GPIO
|
|
outputs_to_set_PWM &= outputs_to_set; // Outputs with PWM to be enabled
|
|
outputs_to_set &= ~outputs_to_set_PWM; // Outputs without PWM to be enabled
|
|
gpio_put_masked(GPIO_ALLOWED_OUTPUTS, outputs_to_set);
|
|
uint32_t temp_mask = 1;
|
|
for (uint8_t i = 0; i < 32; ++i) {
|
|
if(temp_mask & outputs_to_set_PWM){
|
|
pwm_set_gpio_level(i, level_table[i]);
|
|
pwm_gpio_to_channel(i);
|
|
pwm_gpio_to_slice_num(i);
|
|
}
|
|
else if (temp_mask & outputs_with_PWM_enabled){
|
|
pwm_set_gpio_level(i,0);
|
|
}
|
|
temp_mask<<=1;
|
|
}
|
|
}
|
|
void update_active_functions(uint32_t function_byte, uint8_t clr_bit_ind) {
|
|
static uint32_t active_functions;
|
|
static uint32_t prev_active_func;
|
|
function_byte &= ~(clr_bit_arr[clr_bit_ind]);
|
|
active_functions &= clr_bit_arr[clr_bit_ind];
|
|
active_functions |= function_byte;
|
|
uint32_t changes = active_functions ^ prev_active_func;
|
|
if(changes)set_outputs(active_functions);
|
|
prev_active_func = active_functions;
|
|
}
|
|
bool error_detection(int8_t number_of_bytes, const uint8_t byte_array[]) {
|
|
//Bitwise XOR for all Bytes -> Successful result is: "0000 0000"
|
|
uint8_t xor_byte = 0;
|
|
for (int i = 0; i < number_of_bytes; i++) {
|
|
xor_byte = xor_byte ^ byte_array[i];
|
|
}
|
|
return (0 == xor_byte);
|
|
}
|
|
// Returns true for long address
|
|
bool is_long_address(uint8_t number_of_bytes, const uint8_t byte_array[]) {
|
|
if ((byte_array[number_of_bytes - 1]>>6) == 0b00000011) return true;
|
|
return false;
|
|
}
|
|
bool address_evaluation(uint8_t number_of_bytes,const uint8_t byte_array[]) {
|
|
//Check for Idle Package
|
|
if (byte_array[number_of_bytes - 1] == 255)
|
|
{
|
|
return false;
|
|
}
|
|
uint16_t read_address;
|
|
//Long Address Package
|
|
if (is_long_address(number_of_bytes, byte_array))
|
|
{
|
|
//start of transmission -> address_byte_1 -> address_byte_0 -> ... -> end of transmission
|
|
uint16_t address_byte_1 = (byte_array[number_of_bytes - 1]) - 192; //remove long address identifier bits
|
|
uint16_t address_byte_0 = (byte_array[number_of_bytes - 2]);
|
|
read_address = (address_byte_1 << 8) + address_byte_0;
|
|
uint8_t long_address_mask = 0b00111111;
|
|
uint16_t long_address = ((CV_ARRAY_FLASH[16]&long_address_mask)<<8)+CV_ARRAY_FLASH[17];
|
|
return(long_address==read_address);
|
|
}
|
|
//Short Address Package
|
|
else
|
|
{
|
|
//start of transmission -> address_byte_0 -> ... -> end of transmission
|
|
read_address = (byte_array[number_of_bytes - 1]);
|
|
return (CV_ARRAY_FLASH[0] == read_address);
|
|
}
|
|
}
|
|
void instruction_evaluation(uint8_t number_of_bytes,const uint8_t byte_array[]) {
|
|
uint8_t command_byte_n;
|
|
uint8_t command_byte_start_index;
|
|
// start of transmission -> ... -> command_byte_n -> ... -> command_byte_0 -> ... -> end of transmission
|
|
if (is_long_address(number_of_bytes,byte_array)) {
|
|
command_byte_start_index = number_of_bytes - 3;
|
|
}
|
|
else {
|
|
command_byte_start_index = number_of_bytes - 2;
|
|
}
|
|
command_byte_n = byte_array[command_byte_start_index];
|
|
//0011-1111 (128 Speed Step Control) - 2 Byte length
|
|
if (command_byte_n == 0b00111111){
|
|
target_speed_step = byte_array[command_byte_start_index - 1];
|
|
if(target_speed_step>127) {
|
|
target_direction = true; //Forward
|
|
}
|
|
else {
|
|
target_direction = false; //Reverse
|
|
}
|
|
}
|
|
// 10XX-XXXX (Function Group Instruction)
|
|
else if (command_byte_n >> 6 == 0b00000010){
|
|
switch (command_byte_n >> 4) {
|
|
case 0b00001011: // F5-F8
|
|
update_active_functions((command_byte_n << 5),1);
|
|
break;
|
|
case 0b00001010: // F9-F12
|
|
update_active_functions((command_byte_n << 9),2);
|
|
break;
|
|
default: // F0-F4
|
|
update_active_functions(((command_byte_n << 1) + (command_byte_n >> 4)),0);
|
|
break;
|
|
}
|
|
}
|
|
//Feature Expansion Instruction 110X-XXXX
|
|
else if (command_byte_n >> 5 == 0b00000110) {
|
|
switch (command_byte_n) {
|
|
case 0b11011110: // F13-F20
|
|
update_active_functions((byte_array[command_byte_start_index - 1] << 13),3);
|
|
break;
|
|
case 0b11011111: // F21-F28
|
|
update_active_functions((byte_array[command_byte_start_index - 1] << 21),4);
|
|
break;
|
|
case 0b11011000: // F29-F31
|
|
update_active_functions((byte_array[command_byte_start_index - 1] << 29),5);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
bool reset_package_check(uint8_t number_of_bytes,const uint8_t byte_array[]){
|
|
if (byte_array[number_of_bytes-1] == 0b00000000 && byte_array[number_of_bytes-2] == 0b00000000){
|
|
target_speed_step = 1;
|
|
//update_active_functions(0,0,37);
|
|
return true;
|
|
}
|
|
else {
|
|
return false;
|
|
}
|
|
}
|
|
int8_t check_for_package() { //returns number of bytes if valid bit-pattern is found. Otherwise -1 is returned.
|
|
uint64_t package3Masked = last_bits & PACKAGE_MASK_3_BYTES;
|
|
if (package3Masked == PACKAGE_3_BYTES) {
|
|
return 3;
|
|
}
|
|
uint64_t package4Masked = last_bits & PACKAGE_MASK_4_BYTES;
|
|
if (package4Masked == PACKAGE_4_BYTES) {
|
|
return 4;
|
|
}
|
|
uint64_t package5Masked = last_bits & PACKAGE_MASK_5_BYTES;
|
|
if (package5Masked == PACKAGE_5_BYTES) {
|
|
return 5;
|
|
}
|
|
return -1;
|
|
}
|
|
void writeLastBit(bool bit) {
|
|
last_bits <<= 1;
|
|
last_bits |= bit;
|
|
}
|
|
//start of transmission -> byte_n(address byte) -> ... -> byte_0(error detection byte) -> end of transmission
|
|
void bits_to_byte_array(int8_t number_of_bytes,uint8_t byte_array[]) {
|
|
for (uint8_t i = 0; i < number_of_bytes; i++) {
|
|
byte_array[i] = last_bits >> (i * 9 + 1);
|
|
}
|
|
}
|
|
void evaluation(){
|
|
int8_t number_of_bytes = check_for_package();
|
|
if (number_of_bytes != -1) {
|
|
uint8_t byte_array[SIZE_BYTE_ARRAY] = {0};
|
|
bits_to_byte_array(number_of_bytes,byte_array);
|
|
if(byte_array[number_of_bytes-3]==239 && byte_array[number_of_bytes-4]==151){
|
|
}
|
|
if (error_detection(number_of_bytes,byte_array)) {
|
|
if (address_evaluation(number_of_bytes,byte_array)) {
|
|
reset_package_flag = false;
|
|
instruction_evaluation(number_of_bytes,byte_array);
|
|
}
|
|
else if (reset_package_flag) {
|
|
program_mode(number_of_bytes,byte_array);
|
|
}
|
|
else {
|
|
reset_package_flag = reset_package_check(number_of_bytes,byte_array);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
void track_signal_rise(unsigned int gpio, long unsigned int events) {
|
|
rising_edge_time = get_absolute_time();
|
|
gpio_set_irq_enabled_with_callback(DCC_INPUT_PIN, GPIO_IRQ_EDGE_RISE, false, &track_signal_rise);
|
|
gpio_set_irq_enabled_with_callback(DCC_INPUT_PIN, GPIO_IRQ_EDGE_FALL, true, &track_signal_fall);
|
|
}
|
|
void track_signal_fall(unsigned int gpio, long unsigned int events) {
|
|
falling_edge_time = get_absolute_time();
|
|
int64_t time_logical_high = absolute_time_diff_us(rising_edge_time,falling_edge_time);
|
|
if(time_logical_high > 87) {
|
|
writeLastBit(0);
|
|
}
|
|
else {
|
|
writeLastBit(1);
|
|
}
|
|
evaluation();
|
|
gpio_set_irq_enabled_with_callback(DCC_INPUT_PIN, GPIO_IRQ_EDGE_FALL, false, &track_signal_fall);
|
|
gpio_set_irq_enabled_with_callback(DCC_INPUT_PIN, GPIO_IRQ_EDGE_RISE, true, &track_signal_rise);
|
|
}
|
|
void init_outputs(){
|
|
gpio_init_mask(GPIO_ALLOWED_OUTPUTS);
|
|
gpio_set_dir_out_masked(GPIO_ALLOWED_OUTPUTS); //note: This also disables UART on GPIO0 & GPIO1
|
|
uint32_t Outputs_with_PWM_enabled = get_32bit_CV(111);
|
|
uint32_t slice, channel;
|
|
uint16_t wrap, level;
|
|
uint32_t temp_mask = 1;
|
|
for (uint8_t i = 0; i < 32; ++i) {
|
|
if (Outputs_with_PWM_enabled&temp_mask){
|
|
slice = pwm_gpio_to_slice_num(i);
|
|
channel = pwm_gpio_to_channel(i); //0 for A, 1 for B ?
|
|
wrap = get_16bit_CV(115 + slice*7);
|
|
level = get_16bit_CV(118 + 7*slice+ 2*channel);
|
|
gpio_set_function(i,GPIO_FUNC_PWM);
|
|
pwm_set_wrap(slice,wrap);
|
|
pwm_set_gpio_level(i,0);
|
|
level_table[i] = level;
|
|
pwm_set_clkdiv_int_frac(slice,CV_ARRAY_FLASH[117+7*slice],0);
|
|
pwm_set_enabled(slice,true);
|
|
}
|
|
temp_mask<<=1;
|
|
}
|
|
}
|
|
void cv_setup_check(){
|
|
//Check for flash factory setting and set CV_FLASH_ARRAY to default values when factory condition is found.
|
|
multicore_fifo_pop_blocking(); //wait for core1 launch before proceeding
|
|
if (CV_ARRAY_FLASH[64]){
|
|
uint8_t arr[4] = {125,8,7,124};
|
|
program_mode(4,arr); //reset to CV_ARRAY_DEFAULT (CV_8; Value = 8)
|
|
}
|
|
//Check for adc offset setup
|
|
if ( CV_ARRAY_FLASH[171] == 0xFF ){
|
|
uint8_t arr[4] = {125,0,0,124};
|
|
program_mode(4,arr); //ADC offset adjustment (CV_1; Value = 0)
|
|
}
|
|
//Check for motor duty cycle offset setup
|
|
uint sum = (CV_ARRAY_FLASH[53]) + (CV_ARRAY_FLASH[54]) + (CV_ARRAY_FLASH[55]) + (CV_ARRAY_FLASH[56]);
|
|
if(!sum) {
|
|
uint8_t arr[4] = {125,7,6,124};
|
|
program_mode(4,arr); //Motor PWM offset adjustment (CV_7; Value = 7);
|
|
}
|
|
}
|
|
int main() {
|
|
stdio_init_all();
|
|
printf("core0 init...\n");
|
|
multicore_launch_core1(core1_entry);
|
|
cv_setup_check();
|
|
init_outputs();
|
|
gpio_init(DCC_INPUT_PIN);
|
|
gpio_set_dir(DCC_INPUT_PIN, GPIO_IN);
|
|
gpio_pull_up(DCC_INPUT_PIN);
|
|
gpio_set_irq_enabled_with_callback(DCC_INPUT_PIN, GPIO_IRQ_EDGE_RISE, true, &track_signal_rise);
|
|
printf("core0 done\n");
|
|
while (1);
|
|
} |