291 lines
11 KiB
C
291 lines
11 KiB
C
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <inttypes.h>
|
|
#include "pico/stdlib.h"
|
|
#include "pico/multicore.h"
|
|
#include "hardware/gpio.h"
|
|
#include "hardware/pio.h"
|
|
#include "hardware/pwm.h"
|
|
#include "pwm.pio.h"
|
|
#include "automat.h"
|
|
#include "CV.h"
|
|
#include "multicore.h"
|
|
#define SIZE_BYTE_ARRAY 5
|
|
#define SIZE_ACTIVE_FUNCTIONS 69
|
|
#define DCC_INPUT_PIN 17
|
|
#define MOTOR_PWM_FORWARD 21
|
|
#define MOTOR_PWM_REVERSE 22
|
|
#define PACKAGE_3_BYTES 0b11111111110000000000000000000000000001
|
|
#define PACKAGEMASK_3_BYTES 0b11111111111000000001000000001000000001
|
|
#define PACKAGE_4_BYTES 0b11111111110000000000000000000000000000000000001
|
|
#define PACKAGEMASK_4_BYTES 0b11111111111000000001000000001000000001000000001
|
|
#define PACKAGE_5_BYTES 0b11111111110000000000000000000000000000000000000000000001
|
|
#define PACKAGEMASK_5_BYTES 0b11111111111000000001000000001000000001000000001000000001
|
|
bool active_functions[SIZE_ACTIVE_FUNCTIONS] = {false};
|
|
bool direction = 1;
|
|
uint64_t last_bits = 0;
|
|
|
|
int8_t check_for_package() //function returns number of bytes if valid bit-pattern is found. Otherwise -1 is returned
|
|
{
|
|
uint64_t package3Masked = last_bits & PACKAGEMASK_3_BYTES;
|
|
if (package3Masked == PACKAGE_3_BYTES) {
|
|
return 3;
|
|
}
|
|
uint64_t package4Masked = last_bits & PACKAGEMASK_4_BYTES;
|
|
if (package4Masked == PACKAGE_4_BYTES) {
|
|
return 4;
|
|
}
|
|
uint64_t package5Masked = last_bits & PACKAGEMASK_5_BYTES;
|
|
if (package5Masked == PACKAGE_5_BYTES) {
|
|
return 5;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
bool readBit() {
|
|
busy_wait_us_32(87);
|
|
return !gpio_get(DCC_INPUT_PIN);
|
|
}
|
|
|
|
void writeLastBit(bool bit) {
|
|
last_bits <<= 1;
|
|
last_bits |= bit;
|
|
}
|
|
|
|
//start of transmission -> byte_n(address byte) -> ... -> byte_0(error detection byte) -> end of transmission
|
|
void bits_to_byte_array(int8_t number_of_bytes,uint8_t byte_array[]) {
|
|
for (uint8_t i = 0; i < number_of_bytes; i++) {
|
|
byte_array[i] = last_bits >> (i * 9 + 1);
|
|
}
|
|
|
|
}
|
|
void init_pwm(uint gpio, uint8_t speed) {
|
|
uint32_t period = 126*500;
|
|
uint slice_num = pwm_gpio_to_slice_num(gpio);
|
|
pwm_set_wrap(slice_num, period);
|
|
pwm_set_gpio_level(gpio,0);
|
|
pwm_set_enabled(slice_num, true);
|
|
}
|
|
|
|
void set_speed(uint8_t speed) {
|
|
if (speed == 255) //Emergency Break
|
|
{
|
|
printf("EMERGENCY BREAK");
|
|
} else //normal speed control ranges from 0 to 126
|
|
{
|
|
printf("Speed: %u - Direction: %u\n", speed, direction);
|
|
uint16_t duty_cycle = speed*500;
|
|
if (direction)
|
|
{
|
|
pwm_set_gpio_level(MOTOR_PWM_REVERSE,1);
|
|
pwm_set_gpio_level(MOTOR_PWM_FORWARD,duty_cycle);
|
|
}
|
|
else{
|
|
pwm_set_gpio_level(MOTOR_PWM_FORWARD,1);
|
|
pwm_set_gpio_level(MOTOR_PWM_REVERSE,duty_cycle);
|
|
}
|
|
}
|
|
}
|
|
|
|
void set_outputs() {
|
|
uint32_t GPIO_to_be_set = 0;
|
|
uint32_t filter_forbidden_GPIO = 0b00000000000111111111111111111110; //ensures that GPIO's that are used for inputs or PWM (motor) cannot be set HIGH
|
|
for (uint8_t i = 0; i < SIZE_ACTIVE_FUNCTIONS; i++) {
|
|
if (active_functions[i]) {
|
|
printf("F%u == 1\n",i);
|
|
uint8_t func_cv_0 = CV_FUNCTION_ARRAY[4 + i * 8 - 4 * direction];
|
|
uint8_t func_cv_1 = CV_FUNCTION_ARRAY[5 + i * 8 - 4 * direction];
|
|
uint8_t func_cv_2 = CV_FUNCTION_ARRAY[6 + i * 8 - 4 * direction];
|
|
uint8_t func_cv_3 = CV_FUNCTION_ARRAY[7 + i * 8 - 4 * direction];
|
|
uint32_t func_cv = (func_cv_0) + (func_cv_1 << 8) + (func_cv_2 << 16) + (func_cv_3 << 24);
|
|
GPIO_to_be_set = (GPIO_to_be_set | func_cv) & filter_forbidden_GPIO;
|
|
uint32_t mask = 1;
|
|
for (uint8_t j = 0; j < 32; j++)
|
|
{
|
|
uint32_t bit_value = (GPIO_to_be_set&mask)>>j;
|
|
printf("GPIO: %u, set to: %d\n",j,bit_value);
|
|
//gpio_put(j,bit_value);
|
|
mask = mask<<1;
|
|
}
|
|
// printf("func_cv: %u\n",func_cv);
|
|
// printf("func: F%u, direction: %u\n",func,direction);
|
|
//printf("func_cv_0_index: %d func_cv_1_index: %d func_cv_2_index: %d func_cv_3_index: %d \n",4+257+i*8-4*direction,4+258+i*8-4*direction,4+259+i*8-4*direction,4+260+i*8-4*direction);
|
|
}
|
|
}
|
|
}
|
|
|
|
void update_active_functions(uint8_t function_number, uint8_t input_byte, uint8_t count) {
|
|
uint8_t mask = 0b00000001;
|
|
for (uint8_t i = 0; i < count; i++) {
|
|
active_functions[i + function_number] = (input_byte & mask) == 0 ? 0 : 1;
|
|
mask = mask << 1;
|
|
}
|
|
}
|
|
|
|
bool error_detection(int8_t number_of_bytes, const uint8_t byte_array[]) {
|
|
//Bitwise XOR for all Bytes -> Successful result is: "0000 0000"
|
|
uint8_t xor_byte = 0;
|
|
for (int i = 0; i < number_of_bytes; i++) {
|
|
xor_byte = xor_byte ^ byte_array[i];
|
|
}
|
|
return (0 == xor_byte);
|
|
}
|
|
|
|
// Returns true for long address
|
|
bool is_long_address(uint8_t number_of_bytes, const uint8_t byte_array[]) {
|
|
if ((byte_array[number_of_bytes - 1]>>6) == 0b00000011) return true;
|
|
return false;
|
|
}
|
|
|
|
bool address_evaluation(uint8_t number_of_bytes,const uint8_t byte_array[]) {
|
|
uint16_t read_address;
|
|
if (byte_array[number_of_bytes - 1] == 255) //Check for Idle Package
|
|
{
|
|
printf("Idle-Package found!\n");
|
|
return false;
|
|
}
|
|
if (byte_array[number_of_bytes-1] == 0) //Check for Broadcast Package
|
|
{
|
|
printf("Broadcast-Package found!\n");
|
|
return true;
|
|
}
|
|
if (is_long_address(number_of_bytes, byte_array)) //Long Address Package
|
|
{
|
|
//start of transmission -> address_byte_1 -> address_byte_0 -> ... -> end of transmission
|
|
uint16_t address_byte_1 = (byte_array[number_of_bytes - 1]) - 192; //remove long address identifier bits
|
|
uint16_t address_byte_0 = (byte_array[number_of_bytes - 2]);
|
|
read_address = (address_byte_1 << 8) + address_byte_0;
|
|
printf("long address: %u, was read. \n", read_address);
|
|
} else //Short Address Package
|
|
{
|
|
//start of transmission -> address_byte_0 -> ... -> end of transmission
|
|
read_address = (byte_array[number_of_bytes - 1]);
|
|
printf("short address: %u, was read. \n",read_address);
|
|
}
|
|
return (CV_1 == read_address); //returns true if Address Matches
|
|
}
|
|
|
|
void instruction_evaluation(uint8_t number_of_bytes,const uint8_t byte_array[]) {
|
|
uint8_t command_byte_n;
|
|
uint8_t command_byte_start_index;
|
|
// start of transmission -> ... -> command_byte_n -> ... -> command_byte_0 -> ... -> end of transmission
|
|
if (is_long_address(number_of_bytes,byte_array)) {
|
|
command_byte_start_index = number_of_bytes - 3;
|
|
} else {
|
|
command_byte_start_index = number_of_bytes - 2;
|
|
}
|
|
command_byte_n = byte_array[command_byte_start_index];
|
|
|
|
if (command_byte_n >> 6 == 0b00000001) // 01XX-XXXX (Basic Speed and Direction Instruction)
|
|
{
|
|
if (command_byte_n << 4 >> 4 == 0b00000001) // 01XX-0001 (Emergency Break)
|
|
{
|
|
set_speed(255);
|
|
}
|
|
if (command_byte_n << 4 >> 4 == 0b00000000) // 01XX-0000 (Normal Break)
|
|
{
|
|
set_speed(0);
|
|
} else {
|
|
// printf("01XX-XXXX - Basic Speed \n"); //01XX-XXXX - Basic Speed (26 Steps)
|
|
uint8_t mask = 0b01111111;
|
|
uint8_t speed =
|
|
((command_byte_n & mask) - 1) * 4; //Max speed step is equivalent to step 104 of 128 speed step
|
|
mask = 0b00100000;
|
|
direction = (command_byte_n & mask) >> 5;
|
|
set_speed(speed);
|
|
}
|
|
}
|
|
if (command_byte_n == 0b00111111) //0011-1111 (128 Speed Step Control) - 2 Byte length
|
|
{
|
|
// printf("0011-1111 (128 Speed Step Control) Instruction\n");
|
|
direction = (byte_array[command_byte_start_index - 1]) >> 7;
|
|
uint8_t command_byte_n_minus1 = byte_array[command_byte_start_index - 1];
|
|
uint8_t mask = 0b01111111;
|
|
uint8_t speed = (command_byte_n_minus1 & mask);
|
|
if (speed == 0b00000001) // 01XX-0001 (Emergency Break)
|
|
{
|
|
set_speed(255);
|
|
}
|
|
if (speed == 0b00000000) // 01XX-0000 (Normal Break)
|
|
{
|
|
set_speed(0);
|
|
} else {
|
|
set_speed(speed - 1);
|
|
}
|
|
}
|
|
if (command_byte_n >> 6 == 0b00000010) // 10XX-XXXX (Function Group Instruction)
|
|
{
|
|
if (command_byte_n >> 5 == 0b00000100) // Functions F0-F4
|
|
{
|
|
update_active_functions(0, command_byte_n >> 4, 1); //F0
|
|
update_active_functions(1, command_byte_n, 4); //F1-F4
|
|
// printf("Functions F0-F4 Instruction\n");
|
|
} else {
|
|
switch (command_byte_n >> 4) {
|
|
case 0b00001011: // Functions F5-F8
|
|
// printf("Functions F5-F8 Instruction\n");
|
|
update_active_functions(5, command_byte_n, 4);
|
|
break;
|
|
case 0b00001010: // Functions F9-F12
|
|
// printf("Functions F9-F12 Instruction\n");
|
|
update_active_functions(9, command_byte_n, 4);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (command_byte_n >> 5 == 0b00000110) //Feature Expansion Instruction 110X-XXXX
|
|
{
|
|
switch (command_byte_n) {
|
|
case 0b11011110: // F13-F20
|
|
// printf("Functions F13-F20 Instruction\n");
|
|
update_active_functions(13, byte_array[command_byte_start_index - 1], 8);
|
|
break;
|
|
case 0b11011111: // F21-F28
|
|
// printf("Functions F21-F28 Instruction\n");
|
|
update_active_functions(21, byte_array[command_byte_start_index - 1], 8);
|
|
break;
|
|
case 0b11011000: // F29-F36
|
|
// printf("Functions F29-F36 Instruction\n");
|
|
update_active_functions(29, byte_array[command_byte_start_index - 1], 8);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
set_outputs();
|
|
}
|
|
|
|
void gpio_callback_rise(unsigned int gpio, long unsigned int events) {
|
|
writeLastBit(readBit());
|
|
int8_t number_of_bytes = check_for_package();
|
|
if (number_of_bytes != -1) {
|
|
uint8_t byte_array[SIZE_BYTE_ARRAY] = {0};
|
|
bits_to_byte_array(number_of_bytes,byte_array);
|
|
if (error_detection(number_of_bytes,byte_array)) { //Returns true if the XOR verification was error-free
|
|
if (address_evaluation(number_of_bytes,byte_array)) { //Returns true if address matches with CV
|
|
instruction_evaluation(number_of_bytes,byte_array);
|
|
}
|
|
}
|
|
for (int i = 0; i < number_of_bytes; i++) {
|
|
printf("BYTE_%u:" BYTE_TO_BINARY_PATTERN "\n", i, BYTE_TO_BINARY(byte_array[i]));
|
|
}
|
|
printf("Paketgroesse: %u\n", number_of_bytes);
|
|
printf("\n");
|
|
}
|
|
}
|
|
|
|
int main() {
|
|
stdio_init_all();
|
|
gpio_init(DCC_INPUT_PIN);
|
|
gpio_set_dir(DCC_INPUT_PIN, GPIO_IN);
|
|
sleep_ms(1000);
|
|
gpio_set_function(MOTOR_PWM_FORWARD, GPIO_FUNC_PWM);
|
|
gpio_set_function(MOTOR_PWM_REVERSE, GPIO_FUNC_PWM);
|
|
init_pwm(MOTOR_PWM_FORWARD, 50);
|
|
init_pwm(MOTOR_PWM_REVERSE, 100);
|
|
gpio_set_irq_enabled_with_callback(DCC_INPUT_PIN, GPIO_IRQ_EDGE_RISE, true, &gpio_callback_rise);
|
|
while (1);
|
|
}
|