RP2040-Decoder
Loading...
Searching...
No Matches
shared.h File Reference
#include "string.h"
#include "pico/float.h"
#include "pico/stdlib.h"
#include "pico/multicore.h"
#include "pico/printf.h"
#include "hardware/pwm.h"
#include "hardware/adc.h"
#include "hardware/flash.h"

Go to the source code of this file.

Macros

#define LOGLEVEL   0
 
#define LOG(level, ...)
 
#define _125M   125000000
 
#define DCC_INPUT_PIN   21u
 
#define MOTOR_FWD_PIN   23u
 
#define MOTOR_REV_PIN   22u
 
#define FWD_V_EMF_ADC_PIN   28u
 
#define REV_V_EMF_ADC_PIN   29u
 
#define GPIO_OUTPUT_PIN_MASK   (1u<<24) | (1u<<25) | (1u<<26) | (1u<<27) | (1u<<5) | (1u<<4) | (1u<<3) | (1u<<2) | (1u<<1) | (1u<<0)
 
#define GPIO_ILLEGAL_MASK   (1u<<DCC_INPUT_PIN) | (1u<<MOTOR_FWD_PIN) | (1u<<MOTOR_REV_PIN) | (1u<<FWD_V_EMF_ADC_PIN) | (1u<<REV_V_EMF_ADC_PIN)
 
#define GPIO_ALLOWED_OUTPUTS   (GPIO_OUTPUT_PIN_MASK) & ~(GPIO_ILLEGAL_MASK)
 
#define FLASH_TARGET_OFFSET   (PICO_FLASH_SIZE_BYTES-FLASH_SECTOR_SIZE)
 

Functions

void core1_entry ()
 
void write_cv_handler (uint16_t cv_index, uint8_t cv_data)
 
float measure (uint8_t total_iterations, uint8_t measurement_delay_us, uint8_t l_side_arr_cutoff, uint8_t r_side_arr_cutoff, bool direction)
 
uint32_t get_32bit_CV (uint16_t CV_start_index)
 
uint16_t get_16bit_CV (uint16_t CV_start_index)
 
bool get_direction_of_speed_step (uint8_t speed_step)
 Get direction Function calculates direction.Direction is based on speed_step byte.
Refers to "128 Speed Control" - NMRA Standard 9.2.1 section 2.3.2.1 or RCN-212 section 2.2.2.

 

Variables

repeating_timer_t pid_control_timer
 
repeating_timer_t speed_helper_timer
 
const uint8_t * CV_ARRAY_FLASH
 
uint8_t speed_step_target
 
uint8_t speed_step_target_prev
 

Detailed Description

Used by both cores

Macro Definition Documentation

◆ LOG

#define LOG ( level,
... )
Value:
{ if(level <= LOGLEVEL) {printf(__VA_ARGS__);}}

Function Documentation

◆ get_direction_of_speed_step()

bool get_direction_of_speed_step ( uint8_t speed_step)

Get direction Function calculates direction.Direction is based on speed_step byte.
Refers to "128 Speed Control" - NMRA Standard 9.2.1 section 2.3.2.1 or RCN-212 section 2.2.2.

The following speed steps exist:

  • DEC | BIN | DIRECTION | DEFINITION
  • 000 | 0000 0000 | Reverse | STOP
  • 001 | 0000 0001 | Reverse | EMERGENCY STOP
  • 002 | 0000 0010 | Reverse | Speed step 001 (Lowest speed)
  • 003 | 0000 0011 | Reverse | Speed step 002
  • 004 | 0000 0100 | Reverse | Speed step 003
  • ... | .... .... | Reverse | .....
  • ... | .... .... | Reverse | .....
  • ... | .... .... | Reverse | .....
  • 126 | 0111 1110 | Reverse | Speed step 125
  • 127 | 0111 1111 | Reverse | Speed step 126 (Full speed)
  • 128 | 1000 0000 | Forward | STOP
  • 129 | 1000 0001 | Forward | EMERGENCY STOP
  • 130 | 1000 0010 | Forward | Speed step 001 (Lowest speed)
  • 131 | 1000 0011 | Forward | Speed step 002
  • 132 | 1000 0100 | Forward | Speed step 003
  • ... | .... .... | Forward | .....
  • ... | .... .... | Forward | .....
  • ... | .... .... | Forward | .....
  • 254 | 1111 1110 | Forward | Speed step 125
  • 255 | 1111 1111 | Forward | Speed step 126 (Full speed)
Parameters
speed_stepspeed step byte
Returns
direction; false for reverse; true for forward;