RP2040-Decoder
Loading...
Searching...
No Matches
shared.h File Reference
#include "string.h"
#include "pico/float.h"
#include "pico/stdlib.h"
#include "pico/multicore.h"
#include "pico/printf.h"
#include "hardware/pwm.h"
#include "hardware/adc.h"
#include "hardware/flash.h"
#include "hardware/gpio.h"

Go to the source code of this file.

Macros

#define LOGLEVEL   0
 
#define LOG(level, ...)
 
#define _125M   125000000
 
#define DCC_INPUT_PIN   21u
 
#define MOTOR_FWD_PIN   23u
 
#define MOTOR_REV_PIN   22u
 
#define FWD_V_EMF_ADC_PIN   28u
 
#define REV_V_EMF_ADC_PIN   29u
 
#define GPIO_OUTPUT_PIN_MASK   (1u<<24) | (1u<<25) | (1u<<26) | (1u<<27) | (1u<<5) | (1u<<4) | (1u<<3) | (1u<<2) | (1u<<1) | (1u<<0)
 
#define GPIO_ILLEGAL_MASK   (1u<<DCC_INPUT_PIN) | (1u<<MOTOR_FWD_PIN) | (1u<<MOTOR_REV_PIN) | (1u<<FWD_V_EMF_ADC_PIN) | (1u<<REV_V_EMF_ADC_PIN)
 
#define GPIO_ALLOWED_OUTPUTS   (GPIO_OUTPUT_PIN_MASK) & ~(GPIO_ILLEGAL_MASK)
 
#define FLASH_TARGET_OFFSET   (PICO_FLASH_SIZE_BYTES-FLASH_SECTOR_SIZE)
 

Functions

void core1_entry ()
 
void write_cv_handler (uint16_t cv_index, uint8_t cv_data)
 
float measure (uint8_t total_iterations, uint8_t measurement_delay_us, uint8_t l_side_arr_cutoff, uint8_t r_side_arr_cutoff, bool direction)
 
uint32_t get_32bit_CV (uint16_t CV_start_index)
 
uint16_t get_16bit_CV (uint16_t CV_start_index)
 
bool get_direction_of_speed_step (uint8_t speed_step)
 Calculates the direction based on a speed step byte.
 

Variables

repeating_timer_t pid_control_timer
 
repeating_timer_t speed_helper_timer
 
const uint8_t * CV_ARRAY_FLASH
 
uint8_t speed_step_target
 
uint8_t speed_step_target_prev
 

Detailed Description

Used by both cores

Macro Definition Documentation

◆ LOG

#define LOG ( level,
... )
Value:
{ if(level <= LOGLEVEL) {printf(__VA_ARGS__);}}

Function Documentation

◆ get_direction_of_speed_step()

bool get_direction_of_speed_step ( uint8_t speed_step)

Calculates the direction based on a speed step byte.

This function calculates the direction of movement based on the value of the speed_step byte. It refers to the "128 Speed Control" standard as outlined in NMRA Standard 9.2.1 section 2.3.2.1 or RCN-212 section 2.2.2.

The following speed steps are defined:

DEC BIN DIRECTION DEFINITION
000 0000 0000 Reverse STOP
001 0000 0001 Reverse EMERGENCY STOP
002 0000 0010 Reverse Speed step 001
003 0000 0011 Reverse Speed step 002
004 0000 0100 Reverse Speed step 003
... .... .... Reverse ...
126 0111 1110 Reverse Speed step 125
127 0111 1111 Reverse Speed step 126
128 1000 0000 Forward STOP
129 1000 0001 Forward EMERGENCY STOP
130 1000 0010 Forward Speed step 001
131 1000 0011 Forward Speed step 002
132 1000 0100 Forward Speed step 003
... .... .... Forward ...
254 1111 1110 Forward Speed step 125
255 1111 1111 Forward Speed step 126
Parameters
speed_stepThe speed step byte.
Returns
true for forward direction, false for reverse direction.