#include "string.h"
#include "pico/float.h"
#include "pico/stdlib.h"
#include "pico/multicore.h"
#include "pico/printf.h"
#include "hardware/pwm.h"
#include "hardware/adc.h"
#include "hardware/flash.h"
Go to the source code of this file.
|
|
#define | LOGLEVEL 0 |
| |
|
#define | LOG(level, ...) { if(level <= LOGLEVEL) {printf(__VA_ARGS__);}} |
| |
|
#define | _125M 125000000 |
| |
|
#define | DCC_INPUT_PIN 21u |
| |
|
#define | MOTOR_FWD_PIN 23u |
| |
|
#define | MOTOR_REV_PIN 22u |
| |
|
#define | FWD_V_EMF_ADC_PIN 28u |
| |
|
#define | REV_V_EMF_ADC_PIN 29u |
| |
|
#define | GPIO_OUTPUT_PIN_MASK (1u<<24) | (1u<<25) | (1u<<26) | (1u<<27) | (1u<<5) | (1u<<4) | (1u<<3) | (1u<<2) | (1u<<1) | (1u<<0) |
| |
|
#define | GPIO_ILLEGAL_MASK (1u<<DCC_INPUT_PIN) | (1u<<MOTOR_FWD_PIN) | (1u<<MOTOR_REV_PIN) | (1u<<FWD_V_EMF_ADC_PIN) | (1u<<REV_V_EMF_ADC_PIN) |
| |
|
#define | GPIO_ALLOWED_OUTPUTS (GPIO_OUTPUT_PIN_MASK) & ~(GPIO_ILLEGAL_MASK) |
| |
|
#define | FLASH_TARGET_OFFSET (PICO_FLASH_SIZE_BYTES-FLASH_SECTOR_SIZE) |
| |
|
|
void | core1_entry () |
| |
|
void | write_cv_handler (uint16_t cv_index, uint8_t cv_data) |
| |
|
float | measure (uint8_t total_iterations, uint8_t measurement_delay_us, uint8_t l_side_arr_cutoff, uint8_t r_side_arr_cutoff, bool direction) |
| |
|
uint32_t | get_32bit_CV (uint16_t CV_start_index) |
| |
|
uint16_t | get_16bit_CV (uint16_t CV_start_index) |
| |
| bool | get_direction_of_speed_step (uint8_t speed_step) |
| | Get direction Function calculates direction.Direction is based on speed_step byte.
Refers to "128 Speed Control" - NMRA Standard 9.2.1 section 2.3.2.1 or RCN-212 section 2.2.2.
|
| |
|
|
repeating_timer_t | pid_control_timer |
| |
|
repeating_timer_t | speed_helper_timer |
| |
|
const uint8_t * | CV_ARRAY_FLASH |
| |
|
uint8_t | speed_step_target |
| |
|
uint8_t | speed_step_target_prev |
| |
◆ get_direction_of_speed_step()
| bool get_direction_of_speed_step |
( |
uint8_t | speed_step | ) |
|
Get direction Function calculates direction.Direction is based on speed_step byte.
Refers to "128 Speed Control" - NMRA Standard 9.2.1 section 2.3.2.1 or RCN-212 section 2.2.2.
The following speed steps exist:
- DEC | BIN | DIRECTION | DEFINITION
- 000 | 0000 0000 | Reverse | STOP
- 001 | 0000 0001 | Reverse | EMERGENCY STOP
- 002 | 0000 0010 | Reverse | Speed step 001 (Lowest speed)
- 003 | 0000 0011 | Reverse | Speed step 002
- 004 | 0000 0100 | Reverse | Speed step 003
- ... | .... .... | Reverse | .....
- ... | .... .... | Reverse | .....
- ... | .... .... | Reverse | .....
- 126 | 0111 1110 | Reverse | Speed step 125
- 127 | 0111 1111 | Reverse | Speed step 126 (Full speed)
- 128 | 1000 0000 | Forward | STOP
- 129 | 1000 0001 | Forward | EMERGENCY STOP
- 130 | 1000 0010 | Forward | Speed step 001 (Lowest speed)
- 131 | 1000 0011 | Forward | Speed step 002
- 132 | 1000 0100 | Forward | Speed step 003
- ... | .... .... | Forward | .....
- ... | .... .... | Forward | .....
- ... | .... .... | Forward | .....
- 254 | 1111 1110 | Forward | Speed step 125
- 255 | 1111 1111 | Forward | Speed step 126 (Full speed)
- Parameters
-
| speed_step | speed step byte |
- Returns
- direction; false for reverse; true for forward;