name: Build Software on: push: branches: - dev # Trigger on push to 'dev' branch - main # Trigger on push to 'main' branch paths: - '.github/workflows/build_sw.yml' # Trigger if this workflow file changes - 'Software/**' # Trigger if any file in the 'Software' directory changes env: # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.) BUILD_TYPE: Debug jobs: build: runs-on: ubuntu-latest steps: - uses: actions/checkout@v4 - name: install build packages run: sudo apt-get update && sudo apt-get install cmake gcc-arm-none-eabi libnewlib-arm-none-eabi g++ libstdc++-arm-none-eabi-newlib build-essential - name: Get SDK and add PICO_SDK_PATH run: git clone https://github.com/raspberrypi/pico-sdk.git && echo "PICO_SDK_PATH=$GITHUB_WORKSPACE/pico-sdk" >> $GITHUB_ENV - name: Init submodules to get tinyUSB stack run: ls && cd pico-sdk && git submodule update --init && cd .. - name: Configure and run CMake for Hardware Rev 0.3 run: cmake -B ${{github.workspace}}/Software/build-Rev-0_3 -S ${{github.workspace}}/Software -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DPICO_BOARD=RP2040-Decoder-board-Rev-0_3 - name: Build for Hardware Rev 0.3 run: cmake --build ${{github.workspace}}/Software/build-Rev-0_3 --config ${{env.BUILD_TYPE}} - name: Configure and run CMake for Hardware Rev 1.0 run: cmake -B ${{github.workspace}}/Software/build-Rev-1_0 -S ${{github.workspace}}/Software -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} -DPICO_BOARD=RP2040-Decoder-board-Rev-1_0 - name: Build for Hardware Rev 1.0 run: cmake --build ${{github.workspace}}/Software/build-Rev-1_0 --config ${{env.BUILD_TYPE}}